diff options
author | Mark Brown <broonie@kernel.org> | 2021-08-26 17:09:52 +0300 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2021-08-26 17:09:52 +0300 |
commit | 6e9c846aa0c53673c5d53925a6122aa0e53a9795 (patch) | |
tree | f5079b0c50765da8661050b7727d87458fdbde65 /drivers/spi | |
parent | d5f78f50fff3c69915bde28be901b8da56da7e06 (diff) | |
parent | 26cfc0dbe43aae60dc03af27077775244f26c167 (diff) | |
download | linux-6e9c846aa0c53673c5d53925a6122aa0e53a9795.tar.xz |
Merge remote-tracking branch 'spi/for-5.15' into spi-next
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/Kconfig | 12 | ||||
-rw-r--r-- | drivers/spi/Makefile | 1 | ||||
-rw-r--r-- | drivers/spi/spi-bcm2835aux.c | 4 | ||||
-rw-r--r-- | drivers/spi/spi-ep93xx.c | 4 | ||||
-rw-r--r-- | drivers/spi/spi-fsi.c | 125 | ||||
-rw-r--r-- | drivers/spi/spi-fsl-dspi.c | 1 | ||||
-rw-r--r-- | drivers/spi/spi-geni-qcom.c | 6 | ||||
-rw-r--r-- | drivers/spi/spi-imx.c | 21 | ||||
-rw-r--r-- | drivers/spi/spi-mt65xx.c | 159 | ||||
-rw-r--r-- | drivers/spi/spi-mxic.c | 44 | ||||
-rw-r--r-- | drivers/spi/spi-pic32.c | 1 | ||||
-rw-r--r-- | drivers/spi/spi-pxa2xx.c | 35 | ||||
-rw-r--r-- | drivers/spi/spi-rockchip-sfc.c | 694 | ||||
-rw-r--r-- | drivers/spi/spi-sprd-adi.c | 287 | ||||
-rw-r--r-- | drivers/spi/spi-stm32.c | 121 | ||||
-rw-r--r-- | drivers/spi/spi-tegra114.c | 8 | ||||
-rw-r--r-- | drivers/spi/spi-tegra20-slink.c | 77 | ||||
-rw-r--r-- | drivers/spi/spi-zynq-qspi.c | 8 | ||||
-rw-r--r-- | drivers/spi/spi.c | 6 |
19 files changed, 1176 insertions, 438 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index e71a4c514f7b..83e352b0c8f9 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -658,6 +658,18 @@ config SPI_ROCKCHIP The main usecase of this controller is to use spi flash as boot device. +config SPI_ROCKCHIP_SFC + tristate "Rockchip Serial Flash Controller (SFC)" + depends on ARCH_ROCKCHIP || COMPILE_TEST + depends on HAS_IOMEM && HAS_DMA + help + This enables support for Rockchip serial flash controller. This + is a specialized controller used to access SPI flash on some + Rockchip SOCs. + + ROCKCHIP SFC supports DMA and PIO modes. When DMA is not available, + the driver automatically falls back to PIO mode. + config SPI_RB4XX tristate "Mikrotik RB4XX SPI master" depends on SPI_MASTER && ATH79 diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 13e54c45e9df..699db95c8441 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -95,6 +95,7 @@ obj-$(CONFIG_SPI_QCOM_GENI) += spi-geni-qcom.o obj-$(CONFIG_SPI_QCOM_QSPI) += spi-qcom-qspi.o obj-$(CONFIG_SPI_QUP) += spi-qup.o obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o +obj-$(CONFIG_SPI_ROCKCHIP_SFC) += spi-rockchip-sfc.o obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c index 37eab100a7d8..7d709a8c833b 100644 --- a/drivers/spi/spi-bcm2835aux.c +++ b/drivers/spi/spi-bcm2835aux.c @@ -143,12 +143,12 @@ static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs) } #endif /* CONFIG_DEBUG_FS */ -static inline u32 bcm2835aux_rd(struct bcm2835aux_spi *bs, unsigned reg) +static inline u32 bcm2835aux_rd(struct bcm2835aux_spi *bs, unsigned int reg) { return readl(bs->regs + reg); } -static inline void bcm2835aux_wr(struct bcm2835aux_spi *bs, unsigned reg, +static inline void bcm2835aux_wr(struct bcm2835aux_spi *bs, unsigned int reg, u32 val) { writel(val, bs->regs + reg); diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index aa676559d273..5896a7b2fade 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -550,7 +550,7 @@ static int ep93xx_spi_prepare_hardware(struct spi_master *master) u32 val; int ret; - ret = clk_enable(espi->clk); + ret = clk_prepare_enable(espi->clk); if (ret) return ret; @@ -570,7 +570,7 @@ static int ep93xx_spi_unprepare_hardware(struct spi_master *master) val &= ~SSPCR1_SSE; writel(val, espi->mmio + SSPCR1); - clk_disable(espi->clk); + clk_disable_unprepare(espi->clk); return 0; } diff --git a/drivers/spi/spi-fsi.c b/drivers/spi/spi-fsi.c index 87f8829c3995..829770b8ec74 100644 --- a/drivers/spi/spi-fsi.c +++ b/drivers/spi/spi-fsi.c @@ -25,16 +25,11 @@ #define SPI_FSI_BASE 0x70000 #define SPI_FSI_INIT_TIMEOUT_MS 1000 -#define SPI_FSI_MAX_XFR_SIZE 2048 -#define SPI_FSI_MAX_XFR_SIZE_RESTRICTED 8 +#define SPI_FSI_MAX_RX_SIZE 8 +#define SPI_FSI_MAX_TX_SIZE 40 #define SPI_FSI_ERROR 0x0 #define SPI_FSI_COUNTER_CFG 0x1 -#define SPI_FSI_COUNTER_CFG_LOOPS(x) (((u64)(x) & 0xffULL) << 32) -#define SPI_FSI_COUNTER_CFG_N2_RX BIT_ULL(8) -#define SPI_FSI_COUNTER_CFG_N2_TX BIT_ULL(9) -#define SPI_FSI_COUNTER_CFG_N2_IMPLICIT BIT_ULL(10) -#define SPI_FSI_COUNTER_CFG_N2_RELOAD BIT_ULL(11) #define SPI_FSI_CFG1 0x2 #define SPI_FSI_CLOCK_CFG 0x3 #define SPI_FSI_CLOCK_CFG_MM_ENABLE BIT_ULL(32) @@ -76,8 +71,6 @@ struct fsi_spi { struct device *dev; /* SPI controller device */ struct fsi_device *fsi; /* FSI2SPI CFAM engine device */ u32 base; - size_t max_xfr_size; - bool restricted; }; struct fsi_spi_sequence { @@ -241,7 +234,7 @@ static int fsi_spi_reset(struct fsi_spi *ctx) return fsi_spi_write_reg(ctx, SPI_FSI_STATUS, 0ULL); } -static int fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val) +static void fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val) { /* * Add the next byte of instruction to the 8-byte sequence register. @@ -251,8 +244,6 @@ static int fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val) */ seq->data |= (u64)val << seq->bit; seq->bit -= 8; - - return ((64 - seq->bit) / 8) - 2; } static void fsi_spi_sequence_init(struct fsi_spi_sequence *seq) @@ -261,71 +252,11 @@ static void fsi_spi_sequence_init(struct fsi_spi_sequence *seq) seq->data = 0ULL; } -static int fsi_spi_sequence_transfer(struct fsi_spi *ctx, - struct fsi_spi_sequence *seq, - struct spi_transfer *transfer) -{ - int loops; - int idx; - int rc; - u8 val = 0; - u8 len = min(transfer->len, 8U); - u8 rem = transfer->len % len; - - loops = transfer->len / len; - - if (transfer->tx_buf) { - val = SPI_FSI_SEQUENCE_SHIFT_OUT(len); - idx = fsi_spi_sequence_add(seq, val); - - if (rem) - rem = SPI_FSI_SEQUENCE_SHIFT_OUT(rem); - } else if (transfer->rx_buf) { - val = SPI_FSI_SEQUENCE_SHIFT_IN(len); - idx = fsi_spi_sequence_add(seq, val); - - if (rem) - rem = SPI_FSI_SEQUENCE_SHIFT_IN(rem); - } else { - return -EINVAL; - } - - if (ctx->restricted && loops > 1) { - dev_warn(ctx->dev, - "Transfer too large; no branches permitted.\n"); - return -EINVAL; - } - - if (loops > 1) { - u64 cfg = SPI_FSI_COUNTER_CFG_LOOPS(loops - 1); - - fsi_spi_sequence_add(seq, SPI_FSI_SEQUENCE_BRANCH(idx)); - - if (transfer->rx_buf) - cfg |= SPI_FSI_COUNTER_CFG_N2_RX | - SPI_FSI_COUNTER_CFG_N2_TX | - SPI_FSI_COUNTER_CFG_N2_IMPLICIT | - SPI_FSI_COUNTER_CFG_N2_RELOAD; - - rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, cfg); - if (rc) - return rc; - } else { - fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, 0ULL); - } - - if (rem) - fsi_spi_sequence_add(seq, rem); - - return 0; -} - static int fsi_spi_transfer_data(struct fsi_spi *ctx, struct spi_transfer *transfer) { int rc = 0; u64 status = 0ULL; - u64 cfg = 0ULL; if (transfer->tx_buf) { int nb; @@ -363,16 +294,6 @@ static int fsi_spi_transfer_data(struct fsi_spi *ctx, u64 in = 0ULL; u8 *rx = transfer->rx_buf; - rc = fsi_spi_read_reg(ctx, SPI_FSI_COUNTER_CFG, &cfg); - if (rc) - return rc; - - if (cfg & SPI_FSI_COUNTER_CFG_N2_IMPLICIT) { - rc = fsi_spi_write_reg(ctx, SPI_FSI_DATA_TX, 0); - if (rc) - return rc; - } - while (transfer->len > recv) { do { rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS, @@ -439,6 +360,10 @@ static int fsi_spi_transfer_init(struct fsi_spi *ctx) } } while (seq_state && (seq_state != SPI_FSI_STATUS_SEQ_STATE_IDLE)); + rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, 0ULL); + if (rc) + return rc; + rc = fsi_spi_read_reg(ctx, SPI_FSI_CLOCK_CFG, &clock_cfg); if (rc) return rc; @@ -459,6 +384,7 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr, { int rc; u8 seq_slave = SPI_FSI_SEQUENCE_SEL_SLAVE(mesg->spi->chip_select + 1); + unsigned int len; struct spi_transfer *transfer; struct fsi_spi *ctx = spi_controller_get_devdata(ctlr); @@ -471,8 +397,7 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr, struct spi_transfer *next = NULL; /* Sequencer must do shift out (tx) first. */ - if (!transfer->tx_buf || - transfer->len > (ctx->max_xfr_size + 8)) { + if (!transfer->tx_buf || transfer->len > SPI_FSI_MAX_TX_SIZE) { rc = -EINVAL; goto error; } @@ -486,9 +411,13 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr, fsi_spi_sequence_init(&seq); fsi_spi_sequence_add(&seq, seq_slave); - rc = fsi_spi_sequence_transfer(ctx, &seq, transfer); - if (rc) - goto error; + len = transfer->len; + while (len > 8) { + fsi_spi_sequence_add(&seq, + SPI_FSI_SEQUENCE_SHIFT_OUT(8)); + len -= 8; + } + fsi_spi_sequence_add(&seq, SPI_FSI_SEQUENCE_SHIFT_OUT(len)); if (!list_is_last(&transfer->transfer_list, &mesg->transfers)) { @@ -496,7 +425,9 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr, /* Sequencer can only do shift in (rx) after tx. */ if (next->rx_buf) { - if (next->len > ctx->max_xfr_size) { + u8 shift; + + if (next->len > SPI_FSI_MAX_RX_SIZE) { rc = -EINVAL; goto error; } @@ -504,10 +435,8 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr, dev_dbg(ctx->dev, "Sequence rx of %d bytes.\n", next->len); - rc = fsi_spi_sequence_transfer(ctx, &seq, - next); - if (rc) - goto error; + shift = SPI_FSI_SEQUENCE_SHIFT_IN(next->len); + fsi_spi_sequence_add(&seq, shift); } else { next = NULL; } @@ -541,9 +470,7 @@ error: static size_t fsi_spi_max_transfer_size(struct spi_device *spi) { - struct fsi_spi *ctx = spi_controller_get_devdata(spi->controller); - - return ctx->max_xfr_size; + return SPI_FSI_MAX_RX_SIZE; } static int fsi_spi_probe(struct device *dev) @@ -582,14 +509,6 @@ static int fsi_spi_probe(struct device *dev) ctx->fsi = fsi; ctx->base = base + SPI_FSI_BASE; - if (of_device_is_compatible(np, "ibm,fsi2spi-restricted")) { - ctx->restricted = true; - ctx->max_xfr_size = SPI_FSI_MAX_XFR_SIZE_RESTRICTED; - } else { - ctx->restricted = false; - ctx->max_xfr_size = SPI_FSI_MAX_XFR_SIZE; - } - rc = devm_spi_register_controller(dev, ctlr); if (rc) spi_controller_put(ctlr); diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index fb45e6af6638..fd004c9db9dc 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -530,6 +530,7 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr) goto err_rx_dma_buf; } + memset(&cfg, 0, sizeof(cfg)); cfg.src_addr = phy_addr + SPI_POPR; cfg.dst_addr = phy_addr + SPI_PUSHR; cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c index b3861fb88711..2f51421e2a71 100644 --- a/drivers/spi/spi-geni-qcom.c +++ b/drivers/spi/spi-geni-qcom.c @@ -549,12 +549,6 @@ static void setup_fifo_xfer(struct spi_transfer *xfer, */ spin_lock_irq(&mas->lock); geni_se_setup_m_cmd(se, m_cmd, FRAGMENTATION); - - /* - * TX_WATERMARK_REG should be set after SPI configuration and - * setting up GENI SE engine, as driver starts data transfer - * for the watermark interrupt. - */ if (m_cmd & SPI_TX_ONLY) { if (geni_spi_handle_tx(mas)) writel(mas->tx_wm, se->base + SE_GENI_TX_WATERMARK_REG); diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index fa68e9817929..8d8df51c5466 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -1052,12 +1052,8 @@ static void spi_imx_set_burst_len(struct spi_imx_data *spi_imx, int n_bits) static void spi_imx_push(struct spi_imx_data *spi_imx) { - unsigned int burst_len, fifo_words; + unsigned int burst_len; - if (spi_imx->dynamic_burst) - fifo_words = 4; - else - fifo_words = spi_imx_bytes_per_word(spi_imx->bits_per_word); /* * Reload the FIFO when the remaining bytes to be transferred in the * current burst is 0. This only applies when bits_per_word is a @@ -1076,7 +1072,7 @@ static void spi_imx_push(struct spi_imx_data *spi_imx) spi_imx->remainder = burst_len; } else { - spi_imx->remainder = fifo_words; + spi_imx->remainder = spi_imx_bytes_per_word(spi_imx->bits_per_word); } } @@ -1084,8 +1080,7 @@ static void spi_imx_push(struct spi_imx_data *spi_imx) if (!spi_imx->count) break; if (spi_imx->dynamic_burst && - spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder, - fifo_words)) + spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder, 4)) break; spi_imx->tx(spi_imx); spi_imx->txfifo++; @@ -1195,6 +1190,7 @@ static int spi_imx_setupxfer(struct spi_device *spi, * dynamic_burst in that case. */ if (spi_imx->devtype_data->dynamic_burst && !spi_imx->slave_mode && + !(spi->mode & SPI_CS_WORD) && (spi_imx->bits_per_word == 8 || spi_imx->bits_per_word == 16 || spi_imx->bits_per_word == 32)) { @@ -1630,6 +1626,15 @@ static int spi_imx_probe(struct platform_device *pdev) is_imx53_ecspi(spi_imx)) spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY; + if (is_imx51_ecspi(spi_imx) && + device_property_read_u32(&pdev->dev, "cs-gpios", NULL)) + /* + * When using HW-CS implementing SPI_CS_WORD can be done by just + * setting the burst length to the word size. This is + * considerably faster than manually controlling the CS. + */ + spi_imx->bitbang.master->mode_bits |= SPI_CS_WORD; + spi_imx->spi_drctl = spi_drctl; init_completion(&spi_imx->xfer_done); diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 7914255521c3..386e8c84be0a 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -42,8 +42,9 @@ #define SPI_CFG1_CS_IDLE_OFFSET 0 #define SPI_CFG1_PACKET_LOOP_OFFSET 8 #define SPI_CFG1_PACKET_LENGTH_OFFSET 16 -#define SPI_CFG1_GET_TICK_DLY_OFFSET 30 +#define SPI_CFG1_GET_TICK_DLY_OFFSET 29 +#define SPI_CFG1_GET_TICK_DLY_MASK 0xe0000000 #define SPI_CFG1_CS_IDLE_MASK 0xff #define SPI_CFG1_PACKET_LOOP_MASK 0xff00 #define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000 @@ -90,6 +91,8 @@ struct mtk_spi_compatible { bool enhance_timing; /* some IC support DMA addr extension */ bool dma_ext; + /* some IC no need unprepare SPI clk */ + bool no_need_unprepare; }; struct mtk_spi { @@ -104,6 +107,7 @@ struct mtk_spi { struct scatterlist *tx_sgl, *rx_sgl; u32 tx_sgl_len, rx_sgl_len; const struct mtk_spi_compatible *dev_comp; + u32 spi_clk_hz; }; static const struct mtk_spi_compatible mtk_common_compat; @@ -135,12 +139,21 @@ static const struct mtk_spi_compatible mt8183_compat = { .enhance_timing = true, }; +static const struct mtk_spi_compatible mt6893_compat = { + .need_pad_sel = true, + .must_tx = true, + .enhance_timing = true, + .dma_ext = true, + .no_need_unprepare = true, +}; + /* * A piece of default chip info unless the platform * supplies it. */ static const struct mtk_chip_config mtk_default_chip_info = { .sample_sel = 0, + .tick_delay = 0, }; static const struct of_device_id mtk_spi_of_match[] = { @@ -174,6 +187,9 @@ static const struct of_device_id mtk_spi_of_match[] = { { .compatible = "mediatek,mt8192-spi", .data = (void *)&mt6765_compat, }, + { .compatible = "mediatek,mt6893-spi", + .data = (void *)&mt6893_compat, + }, {} }; MODULE_DEVICE_TABLE(of, mtk_spi_of_match); @@ -192,6 +208,65 @@ static void mtk_spi_reset(struct mtk_spi *mdata) writel(reg_val, mdata->base + SPI_CMD_REG); } +static int mtk_spi_set_hw_cs_timing(struct spi_device *spi) +{ + struct mtk_spi *mdata = spi_master_get_devdata(spi->master); + struct spi_delay *cs_setup = &spi->cs_setup; + struct spi_delay *cs_hold = &spi->cs_hold; + struct spi_delay *cs_inactive = &spi->cs_inactive; + u32 setup, hold, inactive; + u32 reg_val; + int delay; + + delay = spi_delay_to_ns(cs_setup, NULL); + if (delay < 0) + return delay; + setup = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000; + + delay = spi_delay_to_ns(cs_hold, NULL); + if (delay < 0) + return delay; + hold = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000; + + delay = spi_delay_to_ns(cs_inactive, NULL); + if (delay < 0) + return delay; + inactive = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000; + + setup = setup ? setup : 1; + hold = hold ? hold : 1; + inactive = inactive ? inactive : 1; + + reg_val = readl(mdata->base + SPI_CFG0_REG); + if (mdata->dev_comp->enhance_timing) { + hold = min_t(u32, hold, 0x10000); + setup = min_t(u32, setup, 0x10000); + reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET); + reg_val |= (((hold - 1) & 0xffff) + << SPI_ADJUST_CFG0_CS_HOLD_OFFSET); + reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET); + reg_val |= (((setup - 1) & 0xffff) + << SPI_ADJUST_CFG0_CS_SETUP_OFFSET); + } else { + hold = min_t(u32, hold, 0x100); + setup = min_t(u32, setup, 0x100); + reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET); + reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET); + reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET); + reg_val |= (((setup - 1) & 0xff) + << SPI_CFG0_CS_SETUP_OFFSET); + } + writel(reg_val, mdata->base + SPI_CFG0_REG); + + inactive = min_t(u32, inactive, 0x100); + reg_val = readl(mdata->base + SPI_CFG1_REG); + reg_val &= ~SPI_CFG1_CS_IDLE_MASK; + reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET); + writel(reg_val, mdata->base + SPI_CFG1_REG); + + return 0; +} + static int mtk_spi_prepare_message(struct spi_master *master, struct spi_message *msg) { @@ -261,6 +336,15 @@ static int mtk_spi_prepare_message(struct spi_master *master, writel(mdata->pad_sel[spi->chip_select], mdata->base + SPI_PAD_SEL_REG); + /* tick delay */ + reg_val = readl(mdata->base + SPI_CFG1_REG); + reg_val &= ~SPI_CFG1_GET_TICK_DLY_MASK; + reg_val |= ((chip_config->tick_delay & 0x7) + << SPI_CFG1_GET_TICK_DLY_OFFSET); + writel(reg_val, mdata->base + SPI_CFG1_REG); + + /* set hw cs timing */ + mtk_spi_set_hw_cs_timing(spi); return 0; } @@ -287,12 +371,11 @@ static void mtk_spi_set_cs(struct spi_device *spi, bool enable) static void mtk_spi_prepare_transfer(struct spi_master *master, struct spi_transfer *xfer) { - u32 spi_clk_hz, div, sck_time, reg_val; + u32 div, sck_time, reg_val; struct mtk_spi *mdata = spi_master_get_devdata(master); - spi_clk_hz = clk_get_rate(mdata->spi_clk); - if (xfer->speed_hz < spi_clk_hz / 2) - div = DIV_ROUND_UP(spi_clk_hz, xfer->speed_hz); + if (xfer->speed_hz < mdata->spi_clk_hz / 2) + div = DIV_ROUND_UP(mdata->spi_clk_hz, xfer->speed_hz); else div = 1; @@ -507,52 +590,6 @@ static bool mtk_spi_can_dma(struct spi_master *master, (unsigned long)xfer->rx_buf % 4 == 0); } -static int mtk_spi_set_hw_cs_timing(struct spi_device *spi, - struct spi_delay *setup, - struct spi_delay *hold, - struct spi_delay *inactive) -{ - struct mtk_spi *mdata = spi_master_get_devdata(spi->master); - u16 setup_dly, hold_dly, inactive_dly; - u32 reg_val; - - if ((setup && setup->unit != SPI_DELAY_UNIT_SCK) || - (hold && hold->unit != SPI_DELAY_UNIT_SCK) || - (inactive && inactive->unit != SPI_DELAY_UNIT_SCK)) { - dev_err(&spi->dev, - "Invalid delay unit, should be SPI_DELAY_UNIT_SCK\n"); - return -EINVAL; - } - - setup_dly = setup ? setup->value : 1; - hold_dly = hold ? hold->value : 1; - inactive_dly = inactive ? inactive->value : 1; - - reg_val = readl(mdata->base + SPI_CFG0_REG); - if (mdata->dev_comp->enhance_timing) { - reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET); - reg_val |= (((hold_dly - 1) & 0xffff) - << SPI_ADJUST_CFG0_CS_HOLD_OFFSET); - reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET); - reg_val |= (((setup_dly - 1) & 0xffff) - << SPI_ADJUST_CFG0_CS_SETUP_OFFSET); - } else { - reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET); - reg_val |= (((hold_dly - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET); - reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET); - reg_val |= (((setup_dly - 1) & 0xff) - << SPI_CFG0_CS_SETUP_OFFSET); - } - writel(reg_val, mdata->base + SPI_CFG0_REG); - - reg_val = readl(mdata->base + SPI_CFG1_REG); - reg_val &= ~SPI_CFG1_CS_IDLE_MASK; - reg_val |= (((inactive_dly - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET); - writel(reg_val, mdata->base + SPI_CFG1_REG); - - return 0; -} - static int mtk_spi_setup(struct spi_device *spi) { struct mtk_spi *mdata = spi_master_get_devdata(spi->master); @@ -790,7 +827,12 @@ static int mtk_spi_probe(struct platform_device *pdev) goto err_put_master; } - clk_disable_unprepare(mdata->spi_clk); + mdata->spi_clk_hz = clk_get_rate(mdata->spi_clk); + + if (mdata->dev_comp->no_need_unprepare) + clk_disable(mdata->spi_clk); + else + clk_disable_unprepare(mdata->spi_clk); pm_runtime_enable(&pdev->dev); @@ -858,6 +900,9 @@ static int mtk_spi_remove(struct platform_device *pdev) mtk_spi_reset(mdata); + if (mdata->dev_comp->no_need_unprepare) + clk_unprepare(mdata->spi_clk); + return 0; } @@ -906,7 +951,10 @@ static int mtk_spi_runtime_suspend(struct device *dev) struct spi_master *master = dev_get_drvdata(dev); struct mtk_spi *mdata = spi_master_get_devdata(master); - clk_disable_unprepare(mdata->spi_clk); + if (mdata->dev_comp->no_need_unprepare) + clk_disable(mdata->spi_clk); + else + clk_disable_unprepare(mdata->spi_clk); return 0; } @@ -917,7 +965,10 @@ static int mtk_spi_runtime_resume(struct device *dev) struct mtk_spi *mdata = spi_master_get_devdata(master); int ret; - ret = clk_prepare_enable(mdata->spi_clk); + if (mdata->dev_comp->no_need_unprepare) + ret = clk_enable(mdata->spi_clk); + else + ret = clk_prepare_enable(mdata->spi_clk); if (ret < 0) { dev_err(dev, "failed to enable spi_clk (%d)\n", ret); return ret; diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c index 96b418293bf2..45889947afed 100644 --- a/drivers/spi/spi-mxic.c +++ b/drivers/spi/spi-mxic.c @@ -335,8 +335,10 @@ static int mxic_spi_data_xfer(struct mxic_spi *mxic, const void *txbuf, static bool mxic_spi_mem_supports_op(struct spi_mem *mem, const struct spi_mem_op *op) { - if (op->data.buswidth > 4 || op->addr.buswidth > 4 || - op->dummy.buswidth > 4 || op->cmd.buswidth > 4) + bool all_false; + + if (op->data.buswidth > 8 || op->addr.buswidth > 8 || + op->dummy.buswidth > 8 || op->cmd.buswidth > 8) return false; if (op->data.nbytes && op->dummy.nbytes && @@ -346,7 +348,13 @@ static bool mxic_spi_mem_supports_op(struct spi_mem *mem, if (op->addr.nbytes > 7) return false; - return spi_mem_default_supports_op(mem, op); + all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr && + !op->data.dtr; + + if (all_false) + return spi_mem_default_supports_op(mem, op); + else + return spi_mem_dtr_supports_op(mem, op); } static int mxic_spi_mem_exec_op(struct spi_mem *mem, @@ -355,14 +363,15 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, struct mxic_spi *mxic = spi_master_get_devdata(mem->spi->master); int nio = 1, i, ret; u32 ss_ctrl; - u8 addr[8]; - u8 opcode = op->cmd.opcode; + u8 addr[8], cmd[2]; ret = mxic_spi_set_freq(mxic, mem->spi->max_speed_hz); if (ret) return ret; - if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD)) + if (mem->spi->mode & (SPI_TX_OCTAL | SPI_RX_OCTAL)) + nio = 8; + else if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD)) nio = 4; else if (mem->spi->mode & (SPI_TX_DUAL | SPI_RX_DUAL)) nio = 2; @@ -374,19 +383,26 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, mxic->regs + HC_CFG); writel(HC_EN_BIT, mxic->regs + HC_EN); - ss_ctrl = OP_CMD_BYTES(1) | OP_CMD_BUSW(fls(op->cmd.buswidth) - 1); + ss_ctrl = OP_CMD_BYTES(op->cmd.nbytes) | + OP_CMD_BUSW(fls(op->cmd.buswidth) - 1) | + (op->cmd.dtr ? OP_CMD_DDR : 0); if (op->addr.nbytes) ss_ctrl |= OP_ADDR_BYTES(op->addr.nbytes) | - OP_ADDR_BUSW(fls(op->addr.buswidth) - 1); + OP_ADDR_BUSW(fls(op->addr.buswidth) - 1) | + (op->addr.dtr ? OP_ADDR_DDR : 0); if (op->dummy.nbytes) ss_ctrl |= OP_DUMMY_CYC(op->dummy.nbytes); if (op->data.nbytes) { - ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1); - if (op->data.dir == SPI_MEM_DATA_IN) + ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1) | + (op->data.dtr ? OP_DATA_DDR : 0); + if (op->data.dir == SPI_MEM_DATA_IN) { ss_ctrl |= OP_READ; + if (op->data.dtr) + ss_ctrl |= OP_DQS_EN; + } } writel(ss_ctrl, mxic->regs + SS_CTRL(mem->spi->chip_select)); @@ -394,7 +410,10 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT, mxic->regs + HC_CFG); - ret = mxic_spi_data_xfer(mxic, &opcode, NULL, 1); + for (i = 0; i < op->cmd.nbytes; i++) + cmd[i] = op->cmd.opcode >> (8 * (op->cmd.nbytes - i - 1)); + + ret = mxic_spi_data_xfer(mxic, cmd, NULL, op->cmd.nbytes); if (ret) goto out; @@ -567,7 +586,8 @@ static int mxic_spi_probe(struct platform_device *pdev) master->bits_per_word_mask = SPI_BPW_MASK(8); master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_TX_DUAL | - SPI_RX_QUAD | SPI_TX_QUAD; + SPI_RX_QUAD | SPI_TX_QUAD | + SPI_RX_OCTAL | SPI_TX_OCTAL; mxic_spi_hw_init(mxic); diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c index 104bde153efd..5eb7b61bbb4d 100644 --- a/drivers/spi/spi-pic32.c +++ b/drivers/spi/spi-pic32.c @@ -361,6 +361,7 @@ static int pic32_spi_dma_config(struct pic32_spi *pic32s, u32 dma_width) struct dma_slave_config cfg; int ret; + memset(&cfg, 0, sizeof(cfg)); cfg.device_fc = true; cfg.src_addr = pic32s->dma_base + buf_offset; cfg.dst_addr = pic32s->dma_base + buf_offset; diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 974e30744b83..1573f6d8eb48 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -594,24 +594,29 @@ static int u32_reader(struct driver_data *drv_data) static void reset_sccr1(struct driver_data *drv_data) { - struct chip_data *chip = - spi_get_ctldata(drv_data->controller->cur_msg->spi); - u32 sccr1_reg; + u32 mask = drv_data->int_cr1 | drv_data->dma_cr1, threshold; + struct chip_data *chip; + + if (drv_data->controller->cur_msg) { + chip = spi_get_ctldata(drv_data->controller->cur_msg->spi); + threshold = chip->threshold; + } else { + threshold = 0; + } - sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1; switch (drv_data->ssp_type) { case QUARK_X1000_SSP: - sccr1_reg &= ~QUARK_X1000_SSCR1_RFT; + mask |= QUARK_X1000_SSCR1_RFT; break; case CE4100_SSP: - sccr1_reg &= ~CE4100_SSCR1_RFT; + mask |= CE4100_SSCR1_RFT; break; default: - sccr1_reg &= ~SSCR1_RFT; + mask |= SSCR1_RFT; break; } - sccr1_reg |= chip->threshold; - pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg); + + pxa2xx_spi_update(drv_data, SSCR1, mask, threshold); } static void int_stop_and_reset(struct driver_data *drv_data) @@ -724,11 +729,8 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data) static void handle_bad_msg(struct driver_data *drv_data) { + int_stop_and_reset(drv_data); pxa2xx_spi_off(drv_data); - clear_SSCR1_bits(drv_data, drv_data->int_cr1); - if (!pxa25x_ssp_comp(drv_data)) - pxa2xx_spi_write(drv_data, SSTO, 0); - write_SSSR_CS(drv_data, drv_data->clear_sr); dev_err(drv_data->ssp->dev, "bad message state in interrupt handler\n"); } @@ -1156,13 +1158,10 @@ static void pxa2xx_spi_handle_err(struct spi_controller *controller, { struct driver_data *drv_data = spi_controller_get_devdata(controller); + int_stop_and_reset(drv_data); + /* Disable the SSP */ pxa2xx_spi_off(drv_data); - /* Clear and disable interrupts and service requests */ - write_SSSR_CS(drv_data, drv_data->clear_sr); - clear_SSCR1_bits(drv_data, drv_data->int_cr1 | drv_data->dma_cr1); - if (!pxa25x_ssp_comp(drv_data)) - pxa2xx_spi_write(drv_data, SSTO, 0); /* * Stop the DMA if running. Note DMA callback handler may have unset diff --git a/drivers/spi/spi-rockchip-sfc.c b/drivers/spi/spi-rockchip-sfc.c new file mode 100644 index 000000000000..a46b38544027 --- /dev/null +++ b/drivers/spi/spi-rockchip-sfc.c @@ -0,0 +1,694 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Rockchip Serial Flash Controller Driver + * + * Copyright (c) 2017-2021, Rockchip Inc. + * Author: Shawn Lin <shawn.lin@rock-chips.com> + * Chris Morgan <macroalpha82@gmail.com> + * Jon Lin <Jon.lin@rock-chips.com> + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/dma-mapping.h> +#include <linux/iopoll.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/spi/spi-mem.h> + +/* System control */ +#define SFC_CTRL 0x0 +#define SFC_CTRL_PHASE_SEL_NEGETIVE BIT(1) +#define SFC_CTRL_CMD_BITS_SHIFT 8 +#define SFC_CTRL_ADDR_BITS_SHIFT 10 +#define SFC_CTRL_DATA_BITS_SHIFT 12 + +/* Interrupt mask */ +#define SFC_IMR 0x4 +#define SFC_IMR_RX_FULL BIT(0) +#define SFC_IMR_RX_UFLOW BIT(1) +#define SFC_IMR_TX_OFLOW BIT(2) +#define SFC_IMR_TX_EMPTY BIT(3) +#define SFC_IMR_TRAN_FINISH BIT(4) +#define SFC_IMR_BUS_ERR BIT(5) +#define SFC_IMR_NSPI_ERR BIT(6) +#define SFC_IMR_DMA BIT(7) + +/* Interrupt clear */ +#define SFC_ICLR 0x8 +#define SFC_ICLR_RX_FULL BIT(0) +#define SFC_ICLR_RX_UFLOW BIT(1) +#define SFC_ICLR_TX_OFLOW BIT(2) +#define SFC_ICLR_TX_EMPTY BIT(3) +#define SFC_ICLR_TRAN_FINISH BIT(4) +#define SFC_ICLR_BUS_ERR BIT(5) +#define SFC_ICLR_NSPI_ERR BIT(6) +#define SFC_ICLR_DMA BIT(7) + +/* FIFO threshold level */ +#define SFC_FTLR 0xc +#define SFC_FTLR_TX_SHIFT 0 +#define SFC_FTLR_TX_MASK 0x1f +#define SFC_FTLR_RX_SHIFT 8 +#define SFC_FTLR_RX_MASK 0x1f + +/* Reset FSM and FIFO */ +#define SFC_RCVR 0x10 +#define SFC_RCVR_RESET BIT(0) + +/* Enhanced mode */ +#define SFC_AX 0x14 + +/* Address Bit number */ +#define SFC_ABIT 0x18 + +/* Interrupt status */ +#define SFC_ISR 0x1c +#define SFC_ISR_RX_FULL_SHIFT BIT(0) +#define SFC_ISR_RX_UFLOW_SHIFT BIT(1) +#define SFC_ISR_TX_OFLOW_SHIFT BIT(2) +#define SFC_ISR_TX_EMPTY_SHIFT BIT(3) +#define SFC_ISR_TX_FINISH_SHIFT BIT(4) +#define SFC_ISR_BUS_ERR_SHIFT BIT(5) +#define SFC_ISR_NSPI_ERR_SHIFT BIT(6) +#define SFC_ISR_DMA_SHIFT BIT(7) + +/* FIFO status */ +#define SFC_FSR 0x20 +#define SFC_FSR_TX_IS_FULL BIT(0) +#define SFC_FSR_TX_IS_EMPTY BIT(1) +#define SFC_FSR_RX_IS_EMPTY BIT(2) +#define SFC_FSR_RX_IS_FULL BIT(3) +#define SFC_FSR_TXLV_MASK GENMASK(12, 8) +#define SFC_FSR_TXLV_SHIFT 8 +#define SFC_FSR_RXLV_MASK GENMASK(20, 16) +#define SFC_FSR_RXLV_SHIFT 16 + +/* FSM status */ +#define SFC_SR 0x24 +#define SFC_SR_IS_IDLE 0x0 +#define SFC_SR_IS_BUSY 0x1 + +/* Raw interrupt status */ +#define SFC_RISR 0x28 +#define SFC_RISR_RX_FULL BIT(0) +#define SFC_RISR_RX_UNDERFLOW BIT(1) +#define SFC_RISR_TX_OVERFLOW BIT(2) +#define SFC_RISR_TX_EMPTY BIT(3) +#define SFC_RISR_TRAN_FINISH BIT(4) +#define SFC_RISR_BUS_ERR BIT(5) +#define SFC_RISR_NSPI_ERR BIT(6) +#define SFC_RISR_DMA BIT(7) + +/* Version */ +#define SFC_VER 0x2C +#define SFC_VER_3 0x3 +#define SFC_VER_4 0x4 +#define SFC_VER_5 0x5 + +/* Delay line controller resiter */ +#define SFC_DLL_CTRL0 0x3C +#define SFC_DLL_CTRL0_SCLK_SMP_DLL BIT(15) +#define SFC_DLL_CTRL0_DLL_MAX_VER4 0xFFU +#define SFC_DLL_CTRL0_DLL_MAX_VER5 0x1FFU + +/* Master trigger */ +#define SFC_DMA_TRIGGER 0x80 +#define SFC_DMA_TRIGGER_START 1 + +/* Src or Dst addr for master */ +#define SFC_DMA_ADDR 0x84 + +/* Length control register extension 32GB */ +#define SFC_LEN_CTRL 0x88 +#define SFC_LEN_CTRL_TRB_SEL 1 +#define SFC_LEN_EXT 0x8C + +/* Command */ +#define SFC_CMD 0x100 +#define SFC_CMD_IDX_SHIFT 0 +#define SFC_CMD_DUMMY_SHIFT 8 +#define SFC_CMD_DIR_SHIFT 12 +#define SFC_CMD_DIR_RD 0 +#define SFC_CMD_DIR_WR 1 +#define SFC_CMD_ADDR_SHIFT 14 +#define SFC_CMD_ADDR_0BITS 0 +#define SFC_CMD_ADDR_24BITS 1 +#define SFC_CMD_ADDR_32BITS 2 +#define SFC_CMD_ADDR_XBITS 3 +#define SFC_CMD_TRAN_BYTES_SHIFT 16 +#define SFC_CMD_CS_SHIFT 30 + +/* Address */ +#define SFC_ADDR 0x104 + +/* Data */ +#define SFC_DATA 0x108 + +/* The controller and documentation reports that it supports up to 4 CS + * devices (0-3), however I have only been able to test a single CS (CS 0) + * due to the configuration of my device. + */ +#define SFC_MAX_CHIPSELECT_NUM 4 + +/* The SFC can transfer max 16KB - 1 at one time + * we set it to 15.5KB here for alignment. + */ +#define SFC_MAX_IOSIZE_VER3 (512 * 31) + +/* DMA is only enabled for large data transmission */ +#define SFC_DMA_TRANS_THRETHOLD (0x40) + +/* Maximum clock values from datasheet suggest keeping clock value under + * 150MHz. No minimum or average value is suggested. + */ +#define SFC_MAX_SPEED (150 * 1000 * 1000) + +struct rockchip_sfc { + struct device *dev; + void __iomem *regbase; + struct clk *hclk; + struct clk *clk; + u32 frequency; + /* virtual mapped addr for dma_buffer */ + void *buffer; + dma_addr_t dma_buffer; + struct completion cp; + bool use_dma; + u32 max_iosize; + u16 version; +}; + +static int rockchip_sfc_reset(struct rockchip_sfc *sfc) +{ + int err; + u32 status; + + writel_relaxed(SFC_RCVR_RESET, sfc->regbase + SFC_RCVR); + + err = readl_poll_timeout(sfc->regbase + SFC_RCVR, status, + !(status & SFC_RCVR_RESET), 20, + jiffies_to_usecs(HZ)); + if (err) + dev_err(sfc->dev, "SFC reset never finished\n"); + + /* Still need to clear the masked interrupt from RISR */ + writel_relaxed(0xFFFFFFFF, sfc->regbase + SFC_ICLR); + + dev_dbg(sfc->dev, "reset\n"); + + return err; +} + +static u16 rockchip_sfc_get_version(struct rockchip_sfc *sfc) +{ + return (u16)(readl(sfc->regbase + SFC_VER) & 0xffff); +} + +static u32 rockchip_sfc_get_max_iosize(struct rockchip_sfc *sfc) +{ + return SFC_MAX_IOSIZE_VER3; +} + +static void rockchip_sfc_irq_unmask(struct rockchip_sfc *sfc, u32 mask) +{ + u32 reg; + + /* Enable transfer complete interrupt */ + reg = readl(sfc->regbase + SFC_IMR); + reg &= ~mask; + writel(reg, sfc->regbase + SFC_IMR); +} + +static void rockchip_sfc_irq_mask(struct rockchip_sfc *sfc, u32 mask) +{ + u32 reg; + + /* Disable transfer finish interrupt */ + reg = readl(sfc->regbase + SFC_IMR); + reg |= mask; + writel(reg, sfc->regbase + SFC_IMR); +} + +static int rockchip_sfc_init(struct rockchip_sfc *sfc) +{ + writel(0, sfc->regbase + SFC_CTRL); + writel(0xFFFFFFFF, sfc->regbase + SFC_ICLR); + rockchip_sfc_irq_mask(sfc, 0xFFFFFFFF); + if (rockchip_sfc_get_version(sfc) >= SFC_VER_4) + writel(SFC_LEN_CTRL_TRB_SEL, sfc->regbase + SFC_LEN_CTRL); + + return 0; +} + +static int rockchip_sfc_wait_txfifo_ready(struct rockchip_sfc *sfc, u32 timeout_us) +{ + int ret = 0; + u32 status; + + ret = readl_poll_timeout(sfc->regbase + SFC_FSR, status, + status & SFC_FSR_TXLV_MASK, 0, + timeout_us); + if (ret) { + dev_dbg(sfc->dev, "sfc wait tx fifo timeout\n"); + + return -ETIMEDOUT; + } + + return (status & SFC_FSR_TXLV_MASK) >> SFC_FSR_TXLV_SHIFT; +} + +static int rockchip_sfc_wait_rxfifo_ready(struct rockchip_sfc *sfc, u32 timeout_us) +{ + int ret = 0; + u32 status; + + ret = readl_poll_timeout(sfc->regbase + SFC_FSR, status, + status & SFC_FSR_RXLV_MASK, 0, + timeout_us); + if (ret) { + dev_dbg(sfc->dev, "sfc wait rx fifo timeout\n"); + + return -ETIMEDOUT; + } + + return (status & SFC_FSR_RXLV_MASK) >> SFC_FSR_RXLV_SHIFT; +} + +static void rockchip_sfc_adjust_op_work(struct spi_mem_op *op) +{ + if (unlikely(op->dummy.nbytes && !op->addr.nbytes)) { + /* + * SFC not support output DUMMY cycles right after CMD cycles, so + * treat it as ADDR cycles. + */ + op->addr.nbytes = op->dummy.nbytes; + op->addr.buswidth = op->dummy.buswidth; + op->addr.val = 0xFFFFFFFFF; + + op->dummy.nbytes = 0; + } +} + +static int rockchip_sfc_xfer_setup(struct rockchip_sfc *sfc, + struct spi_mem *mem, + const struct spi_mem_op *op, + u32 len) +{ + u32 ctrl = 0, cmd = 0; + + /* set CMD */ + cmd = op->cmd.opcode; + ctrl |= ((op->cmd.buswidth >> 1) << SFC_CTRL_CMD_BITS_SHIFT); + + /* set ADDR */ + if (op->addr.nbytes) { + if (op->addr.nbytes == 4) { + cmd |= SFC_CMD_ADDR_32BITS << SFC_CMD_ADDR_SHIFT; + } else if (op->addr.nbytes == 3) { + cmd |= SFC_CMD_ADDR_24BITS << SFC_CMD_ADDR_SHIFT; + } else { + cmd |= SFC_CMD_ADDR_XBITS << SFC_CMD_ADDR_SHIFT; + writel(op->addr.nbytes * 8 - 1, sfc->regbase + SFC_ABIT); + } + + ctrl |= ((op->addr.buswidth >> 1) << SFC_CTRL_ADDR_BITS_SHIFT); + } + + /* set DUMMY */ + if (op->dummy.nbytes) { + if (op->dummy.buswidth == 4) + cmd |= op->dummy.nbytes * 2 << SFC_CMD_DUMMY_SHIFT; + else if (op->dummy.buswidth == 2) + cmd |= op->dummy.nbytes * 4 << SFC_CMD_DUMMY_SHIFT; + else + cmd |= op->dummy.nbytes * 8 << SFC_CMD_DUMMY_SHIFT; + } + + /* set DATA */ + if (sfc->version >= SFC_VER_4) /* Clear it if no data to transfer */ + writel(len, sfc->regbase + SFC_LEN_EXT); + else + cmd |= len << SFC_CMD_TRAN_BYTES_SHIFT; + if (len) { + if (op->data.dir == SPI_MEM_DATA_OUT) + cmd |= SFC_CMD_DIR_WR << SFC_CMD_DIR_SHIFT; + + ctrl |= ((op->data.buswidth >> 1) << SFC_CTRL_DATA_BITS_SHIFT); + } + if (!len && op->addr.nbytes) + cmd |= SFC_CMD_DIR_WR << SFC_CMD_DIR_SHIFT; + + /* set the Controller */ + ctrl |= SFC_CTRL_PHASE_SEL_NEGETIVE; + cmd |= mem->spi->chip_select << SFC_CMD_CS_SHIFT; + + dev_dbg(sfc->dev, "sfc addr.nbytes=%x(x%d) dummy.nbytes=%x(x%d)\n", + op->addr.nbytes, op->addr.buswidth, + op->dummy.nbytes, op->dummy.buswidth); + dev_dbg(sfc->dev, "sfc ctrl=%x cmd=%x addr=%llx len=%x\n", + ctrl, cmd, op->addr.val, len); + + writel(ctrl, sfc->regbase + SFC_CTRL); + writel(cmd, sfc->regbase + SFC_CMD); + if (op->addr.nbytes) + writel(op->addr.val, sfc->regbase + SFC_ADDR); + + return 0; +} + +static int rockchip_sfc_write_fifo(struct rockchip_sfc *sfc, const u8 *buf, int len) +{ + u8 bytes = len & 0x3; + u32 dwords; + int tx_level; + u32 write_words; + u32 tmp = 0; + + dwords = len >> 2; + while (dwords) { + tx_level = rockchip_sfc_wait_txfifo_ready(sfc, 1000); + if (tx_level < 0) + return tx_level; + write_words = min_t(u32, tx_level, dwords); + iowrite32_rep(sfc->regbase + SFC_DATA, buf, write_words); + buf += write_words << 2; + dwords -= write_words; + } + + /* write the rest non word aligned bytes */ + if (bytes) { + tx_level = rockchip_sfc_wait_txfifo_ready(sfc, 1000); + if (tx_level < 0) + return tx_level; + memcpy(&tmp, buf, bytes); + writel(tmp, sfc->regbase + SFC_DATA); + } + + return len; +} + +static int rockchip_sfc_read_fifo(struct rockchip_sfc *sfc, u8 *buf, int len) +{ + u8 bytes = len & 0x3; + u32 dwords; + u8 read_words; + int rx_level; + int tmp; + + /* word aligned access only */ + dwords = len >> 2; + while (dwords) { + rx_level = rockchip_sfc_wait_rxfifo_ready(sfc, 1000); + if (rx_level < 0) + return rx_level; + read_words = min_t(u32, rx_level, dwords); + ioread32_rep(sfc->regbase + SFC_DATA, buf, read_words); + buf += read_words << 2; + dwords -= read_words; + } + + /* read the rest non word aligned bytes */ + if (bytes) { + rx_level = rockchip_sfc_wait_rxfifo_ready(sfc, 1000); + if (rx_level < 0) + return rx_level; + tmp = readl(sfc->regbase + SFC_DATA); + memcpy(buf, &tmp, bytes); + } + + return len; +} + +static int rockchip_sfc_fifo_transfer_dma(struct rockchip_sfc *sfc, dma_addr_t dma_buf, size_t len) +{ + writel(0xFFFFFFFF, sfc->regbase + SFC_ICLR); + writel((u32)dma_buf, sfc->regbase + SFC_DMA_ADDR); + writel(SFC_DMA_TRIGGER_START, sfc->regbase + SFC_DMA_TRIGGER); + + return len; +} + +static int rockchip_sfc_xfer_data_poll(struct rockchip_sfc *sfc, + const struct spi_mem_op *op, u32 len) +{ + dev_dbg(sfc->dev, "sfc xfer_poll len=%x\n", len); + + if (op->data.dir == SPI_MEM_DATA_OUT) + return rockchip_sfc_write_fifo(sfc, op->data.buf.out, len); + else + return rockchip_sfc_read_fifo(sfc, op->data.buf.in, len); +} + +static int rockchip_sfc_xfer_data_dma(struct rockchip_sfc *sfc, + const struct spi_mem_op *op, u32 len) +{ + int ret; + + dev_dbg(sfc->dev, "sfc xfer_dma len=%x\n", len); + + if (op->data.dir == SPI_MEM_DATA_OUT) + memcpy(sfc->buffer, op->data.buf.out, len); + + ret = rockchip_sfc_fifo_transfer_dma(sfc, sfc->dma_buffer, len); + if (!wait_for_completion_timeout(&sfc->cp, msecs_to_jiffies(2000))) { + dev_err(sfc->dev, "DMA wait for transfer finish timeout\n"); + ret = -ETIMEDOUT; + } + rockchip_sfc_irq_mask(sfc, SFC_IMR_DMA); + if (op->data.dir == SPI_MEM_DATA_IN) + memcpy(op->data.buf.in, sfc->buffer, len); + + return ret; +} + +static int rockchip_sfc_xfer_done(struct rockchip_sfc *sfc, u32 timeout_us) +{ + int ret = 0; + u32 status; + + ret = readl_poll_timeout(sfc->regbase + SFC_SR, status, + !(status & SFC_SR_IS_BUSY), + 20, timeout_us); + if (ret) { + dev_err(sfc->dev, "wait sfc idle timeout\n"); + rockchip_sfc_reset(sfc); + + ret = -EIO; + } + + return ret; +} + +static int rockchip_sfc_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct rockchip_sfc *sfc = spi_master_get_devdata(mem->spi->master); + u32 len = op->data.nbytes; + int ret; + + if (unlikely(mem->spi->max_speed_hz != sfc->frequency)) { + ret = clk_set_rate(sfc->clk, mem->spi->max_speed_hz); + if (ret) + return ret; + sfc->frequency = mem->spi->max_speed_hz; + dev_dbg(sfc->dev, "set_freq=%dHz real_freq=%ldHz\n", + sfc->frequency, clk_get_rate(sfc->clk)); + } + + rockchip_sfc_adjust_op_work((struct spi_mem_op *)op); + rockchip_sfc_xfer_setup(sfc, mem, op, len); + if (len) { + if (likely(sfc->use_dma) && len >= SFC_DMA_TRANS_THRETHOLD) { + init_completion(&sfc->cp); + rockchip_sfc_irq_unmask(sfc, SFC_IMR_DMA); + ret = rockchip_sfc_xfer_data_dma(sfc, op, len); + } else { + ret = rockchip_sfc_xfer_data_poll(sfc, op, len); + } + + if (ret != len) { + dev_err(sfc->dev, "xfer data failed ret %d dir %d\n", ret, op->data.dir); + + return -EIO; + } + } + + return rockchip_sfc_xfer_done(sfc, 100000); +} + +static int rockchip_sfc_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) +{ + struct rockchip_sfc *sfc = spi_master_get_devdata(mem->spi->master); + + op->data.nbytes = min(op->data.nbytes, sfc->max_iosize); + + return 0; +} + +static const struct spi_controller_mem_ops rockchip_sfc_mem_ops = { + .exec_op = rockchip_sfc_exec_mem_op, + .adjust_op_size = rockchip_sfc_adjust_op_size, +}; + +static irqreturn_t rockchip_sfc_irq_handler(int irq, void *dev_id) +{ + struct rockchip_sfc *sfc = dev_id; + u32 reg; + + reg = readl(sfc->regbase + SFC_RISR); + + /* Clear interrupt */ + writel_relaxed(reg, sfc->regbase + SFC_ICLR); + + if (reg & SFC_RISR_DMA) { + complete(&sfc->cp); + + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static int rockchip_sfc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct spi_master *master; + struct resource *res; + struct rockchip_sfc *sfc; + int ret; + + master = devm_spi_alloc_master(&pdev->dev, sizeof(*sfc)); + if (!master) + return -ENOMEM; + + master->flags = SPI_MASTER_HALF_DUPLEX; + master->mem_ops = &rockchip_sfc_mem_ops; + master->dev.of_node = pdev->dev.of_node; + master->mode_bits = SPI_TX_QUAD | SPI_TX_DUAL | SPI_RX_QUAD | SPI_RX_DUAL; + master->max_speed_hz = SFC_MAX_SPEED; + master->num_chipselect = SFC_MAX_CHIPSELECT_NUM; + + sfc = spi_master_get_devdata(master); + sfc->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sfc->regbase = devm_ioremap_resource(dev, res); + if (IS_ERR(sfc->regbase)) + return PTR_ERR(sfc->regbase); + + sfc->clk = devm_clk_get(&pdev->dev, "clk_sfc"); + if (IS_ERR(sfc->clk)) { + dev_err(&pdev->dev, "Failed to get sfc interface clk\n"); + return PTR_ERR(sfc->clk); + } + + sfc->hclk = devm_clk_get(&pdev->dev, "hclk_sfc"); + if (IS_ERR(sfc->hclk)) { + dev_err(&pdev->dev, "Failed to get sfc ahb clk\n"); + return PTR_ERR(sfc->hclk); + } + + sfc->use_dma = !of_property_read_bool(sfc->dev->of_node, + "rockchip,sfc-no-dma"); + + if (sfc->use_dma) { + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) { + dev_warn(dev, "Unable to set dma mask\n"); + return ret; + } + + sfc->buffer = dmam_alloc_coherent(dev, SFC_MAX_IOSIZE_VER3, + &sfc->dma_buffer, + GFP_KERNEL); + if (!sfc->buffer) + return -ENOMEM; + } + + ret = clk_prepare_enable(sfc->hclk); + if (ret) { + dev_err(&pdev->dev, "Failed to enable ahb clk\n"); + goto err_hclk; + } + + ret = clk_prepare_enable(sfc->clk); + if (ret) { + dev_err(&pdev->dev, "Failed to enable interface clk\n"); + goto err_clk; + } + + /* Find the irq */ + ret = platform_get_irq(pdev, 0); + if (ret < 0) { + dev_err(dev, "Failed to get the irq\n"); + goto err_irq; + } + + ret = devm_request_irq(dev, ret, rockchip_sfc_irq_handler, + 0, pdev->name, sfc); + if (ret) { + dev_err(dev, "Failed to request irq\n"); + + return ret; + } + + ret = rockchip_sfc_init(sfc); + if (ret) + goto err_irq; + + sfc->max_iosize = rockchip_sfc_get_max_iosize(sfc); + sfc->version = rockchip_sfc_get_version(sfc); + + ret = spi_register_master(master); + if (ret) + goto err_irq; + + return 0; + +err_irq: + clk_disable_unprepare(sfc->clk); +err_clk: + clk_disable_unprepare(sfc->hclk); +err_hclk: + return ret; +} + +static int rockchip_sfc_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct rockchip_sfc *sfc = platform_get_drvdata(pdev); + + spi_unregister_master(master); + + clk_disable_unprepare(sfc->clk); + clk_disable_unprepare(sfc->hclk); + + return 0; +} + +static const struct of_device_id rockchip_sfc_dt_ids[] = { + { .compatible = "rockchip,sfc"}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rockchip_sfc_dt_ids); + +static struct platform_driver rockchip_sfc_driver = { + .driver = { + .name = "rockchip-sfc", + .of_match_table = rockchip_sfc_dt_ids, + }, + .probe = rockchip_sfc_probe, + .remove = rockchip_sfc_remove, +}; +module_platform_driver(rockchip_sfc_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Rockchip Serial Flash Controller Driver"); +MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>"); +MODULE_AUTHOR("Chris Morgan <macromorgan@hotmail.com>"); +MODULE_AUTHOR("Jon Lin <Jon.lin@rock-chips.com>"); diff --git a/drivers/spi/spi-sprd-adi.c b/drivers/spi/spi-sprd-adi.c index ab19068be867..1edbf44c05a7 100644 --- a/drivers/spi/spi-sprd-adi.c +++ b/drivers/spi/spi-sprd-adi.c @@ -52,10 +52,20 @@ /* * ADI slave devices include RTC, ADC, regulator, charger, thermal and so on. - * The slave devices address offset is always 0x8000 and size is 4K. + * ADI supports 12/14bit address for r2p0, and additional 17bit for r3p0 or + * later versions. Since bit[1:0] are zero, so the spec describe them as + * 10/12/15bit address mode. + * The 10bit mode supports sigle slave, 12/15bit mode supports 3 slave, the + * high two bits is slave_id. + * The slave devices address offset is 0x8000 for 10/12bit address mode, + * and 0x20000 for 15bit mode. */ -#define ADI_SLAVE_ADDR_SIZE SZ_4K -#define ADI_SLAVE_OFFSET 0x8000 +#define ADI_10BIT_SLAVE_ADDR_SIZE SZ_4K +#define ADI_10BIT_SLAVE_OFFSET 0x8000 +#define ADI_12BIT_SLAVE_ADDR_SIZE SZ_16K +#define ADI_12BIT_SLAVE_OFFSET 0x8000 +#define ADI_15BIT_SLAVE_ADDR_SIZE SZ_128K +#define ADI_15BIT_SLAVE_OFFSET 0x20000 /* Timeout (ms) for the trylock of hardware spinlocks */ #define ADI_HWSPINLOCK_TIMEOUT 5000 @@ -67,24 +77,35 @@ #define ADI_FIFO_DRAIN_TIMEOUT 1000 #define ADI_READ_TIMEOUT 2000 -#define REG_ADDR_LOW_MASK GENMASK(11, 0) + +/* + * Read back address from REG_ADI_RD_DATA bit[30:16] which maps to: + * REG_ADI_RD_CMD bit[14:0] for r2p0 + * REG_ADI_RD_CMD bit[16:2] for r3p0 + */ +#define RDBACK_ADDR_MASK_R2 GENMASK(14, 0) +#define RDBACK_ADDR_MASK_R3 GENMASK(16, 2) +#define RDBACK_ADDR_SHIFT_R3 2 /* Registers definitions for PMIC watchdog controller */ -#define REG_WDG_LOAD_LOW 0x80 -#define REG_WDG_LOAD_HIGH 0x84 -#define REG_WDG_CTRL 0x88 -#define REG_WDG_LOCK 0xa0 +#define REG_WDG_LOAD_LOW 0x0 +#define REG_WDG_LOAD_HIGH 0x4 +#define REG_WDG_CTRL 0x8 +#define REG_WDG_LOCK 0x20 /* Bits definitions for register REG_WDG_CTRL */ #define BIT_WDG_RUN BIT(1) #define BIT_WDG_NEW BIT(2) #define BIT_WDG_RST BIT(3) +/* Bits definitions for register REG_MODULE_EN */ +#define BIT_WDG_EN BIT(2) + /* Registers definitions for PMIC */ #define PMIC_RST_STATUS 0xee8 #define PMIC_MODULE_EN 0xc08 #define PMIC_CLK_EN 0xc18 -#define BIT_WDG_EN BIT(2) +#define PMIC_WDG_BASE 0x80 /* Definition of PMIC reset status register */ #define HWRST_STATUS_SECURITY 0x02 @@ -103,10 +124,26 @@ #define HWRST_STATUS_WATCHDOG 0xf0 /* Use default timeout 50 ms that converts to watchdog values */ -#define WDG_LOAD_VAL ((50 * 1000) / 32768) +#define WDG_LOAD_VAL ((50 * 32768) / 1000) #define WDG_LOAD_MASK GENMASK(15, 0) #define WDG_UNLOCK_KEY 0xe551 +struct sprd_adi_wdg { + u32 base; + u32 rst_sts; + u32 wdg_en; + u32 wdg_clk; +}; + +struct sprd_adi_data { + u32 slave_offset; + u32 slave_addr_size; + int (*read_check)(u32 val, u32 reg); + int (*restart)(struct notifier_block *this, + unsigned long mode, void *cmd); + void (*wdg_rst)(void *p); +}; + struct sprd_adi { struct spi_controller *ctlr; struct device *dev; @@ -115,26 +152,21 @@ struct sprd_adi { unsigned long slave_vbase; unsigned long slave_pbase; struct notifier_block restart_handler; + const struct sprd_adi_data *data; }; -static int sprd_adi_check_paddr(struct sprd_adi *sadi, u32 paddr) +static int sprd_adi_check_addr(struct sprd_adi *sadi, u32 reg) { - if (paddr < sadi->slave_pbase || paddr > - (sadi->slave_pbase + ADI_SLAVE_ADDR_SIZE)) { + if (reg >= sadi->data->slave_addr_size) { dev_err(sadi->dev, - "slave physical address is incorrect, addr = 0x%x\n", - paddr); + "slave address offset is incorrect, reg = 0x%x\n", + reg); return -EINVAL; } return 0; } -static unsigned long sprd_adi_to_vaddr(struct sprd_adi *sadi, u32 paddr) -{ - return (paddr - sadi->slave_pbase + sadi->slave_vbase); -} - static int sprd_adi_drain_fifo(struct sprd_adi *sadi) { u32 timeout = ADI_FIFO_DRAIN_TIMEOUT; @@ -161,11 +193,35 @@ static int sprd_adi_fifo_is_full(struct sprd_adi *sadi) return readl_relaxed(sadi->base + REG_ADI_ARM_FIFO_STS) & BIT_FIFO_FULL; } -static int sprd_adi_read(struct sprd_adi *sadi, u32 reg_paddr, u32 *read_val) +static int sprd_adi_read_check(u32 val, u32 addr) +{ + u32 rd_addr; + + rd_addr = (val & RD_ADDR_MASK) >> RD_ADDR_SHIFT; + + if (rd_addr != addr) { + pr_err("ADI read error, addr = 0x%x, val = 0x%x\n", addr, val); + return -EIO; + } + + return 0; +} + +static int sprd_adi_read_check_r2(u32 val, u32 reg) +{ + return sprd_adi_read_check(val, reg & RDBACK_ADDR_MASK_R2); +} + +static int sprd_adi_read_check_r3(u32 val, u32 reg) +{ + return sprd_adi_read_check(val, (reg & RDBACK_ADDR_MASK_R3) >> RDBACK_ADDR_SHIFT_R3); +} + +static int sprd_adi_read(struct sprd_adi *sadi, u32 reg, u32 *read_val) { int read_timeout = ADI_READ_TIMEOUT; unsigned long flags; - u32 val, rd_addr; + u32 val; int ret = 0; if (sadi->hwlock) { @@ -178,11 +234,15 @@ static int sprd_adi_read(struct sprd_adi *sadi, u32 reg_paddr, u32 *read_val) } } + ret = sprd_adi_check_addr(sadi, reg); + if (ret) + goto out; + /* - * Set the physical register address need to read into RD_CMD register, + * Set the slave address offset need to read into RD_CMD register, * then ADI controller will start to transfer automatically. */ - writel_relaxed(reg_paddr, sadi->base + REG_ADI_RD_CMD); + writel_relaxed(reg, sadi->base + REG_ADI_RD_CMD); /* * Wait read operation complete, the BIT_RD_CMD_BUSY will be set @@ -205,18 +265,15 @@ static int sprd_adi_read(struct sprd_adi *sadi, u32 reg_paddr, u32 *read_val) } /* - * The return value includes data and read register address, from bit 0 - * to bit 15 are data, and from bit 16 to bit 30 are read register - * address. Then we can check the returned register address to validate - * data. + * The return value before adi r5p0 includes data and read register + * address, from bit 0to bit 15 are data, and from bit 16 to bit 30 + * are read register address. Then we can check the returned register + * address to validate data. */ - rd_addr = (val & RD_ADDR_MASK) >> RD_ADDR_SHIFT; - - if (rd_addr != (reg_paddr & REG_ADDR_LOW_MASK)) { - dev_err(sadi->dev, "read error, reg addr = 0x%x, val = 0x%x\n", - reg_paddr, val); - ret = -EIO; - goto out; + if (sadi->data->read_check) { + ret = sadi->data->read_check(val, reg); + if (ret < 0) + goto out; } *read_val = val & RD_VALUE_MASK; @@ -227,9 +284,8 @@ out: return ret; } -static int sprd_adi_write(struct sprd_adi *sadi, u32 reg_paddr, u32 val) +static int sprd_adi_write(struct sprd_adi *sadi, u32 reg, u32 val) { - unsigned long reg = sprd_adi_to_vaddr(sadi, reg_paddr); u32 timeout = ADI_FIFO_DRAIN_TIMEOUT; unsigned long flags; int ret; @@ -244,6 +300,10 @@ static int sprd_adi_write(struct sprd_adi *sadi, u32 reg_paddr, u32 val) } } + ret = sprd_adi_check_addr(sadi, reg); + if (ret) + goto out; + ret = sprd_adi_drain_fifo(sadi); if (ret < 0) goto out; @@ -254,7 +314,8 @@ static int sprd_adi_write(struct sprd_adi *sadi, u32 reg_paddr, u32 val) */ do { if (!sprd_adi_fifo_is_full(sadi)) { - writel_relaxed(val, (void __iomem *)reg); + /* we need virtual register address to write. */ + writel_relaxed(val, (void __iomem *)(sadi->slave_vbase + reg)); break; } @@ -277,60 +338,41 @@ static int sprd_adi_transfer_one(struct spi_controller *ctlr, struct spi_transfer *t) { struct sprd_adi *sadi = spi_controller_get_devdata(ctlr); - u32 phy_reg, val; + u32 reg, val; int ret; if (t->rx_buf) { - phy_reg = *(u32 *)t->rx_buf + sadi->slave_pbase; - - ret = sprd_adi_check_paddr(sadi, phy_reg); - if (ret) - return ret; - - ret = sprd_adi_read(sadi, phy_reg, &val); - if (ret) - return ret; - + reg = *(u32 *)t->rx_buf; + ret = sprd_adi_read(sadi, reg, &val); *(u32 *)t->rx_buf = val; } else if (t->tx_buf) { u32 *p = (u32 *)t->tx_buf; - - /* - * Get the physical register address need to write and convert - * the physical address to virtual address. Since we need - * virtual register address to write. - */ - phy_reg = *p++ + sadi->slave_pbase; - ret = sprd_adi_check_paddr(sadi, phy_reg); - if (ret) - return ret; - + reg = *p++; val = *p; - ret = sprd_adi_write(sadi, phy_reg, val); - if (ret) - return ret; + ret = sprd_adi_write(sadi, reg, val); } else { dev_err(sadi->dev, "no buffer for transfer\n"); - return -EINVAL; + ret = -EINVAL; } - return 0; + return ret; } -static void sprd_adi_set_wdt_rst_mode(struct sprd_adi *sadi) +static void sprd_adi_set_wdt_rst_mode(void *p) { #if IS_ENABLED(CONFIG_SPRD_WATCHDOG) u32 val; + struct sprd_adi *sadi = (struct sprd_adi *)p; - /* Set default watchdog reboot mode */ - sprd_adi_read(sadi, sadi->slave_pbase + PMIC_RST_STATUS, &val); + /* Init watchdog reset mode */ + sprd_adi_read(sadi, PMIC_RST_STATUS, &val); val |= HWRST_STATUS_WATCHDOG; - sprd_adi_write(sadi, sadi->slave_pbase + PMIC_RST_STATUS, val); + sprd_adi_write(sadi, PMIC_RST_STATUS, val); #endif } -static int sprd_adi_restart_handler(struct notifier_block *this, - unsigned long mode, void *cmd) +static int sprd_adi_restart(struct notifier_block *this, unsigned long mode, + void *cmd, struct sprd_adi_wdg *wdg) { struct sprd_adi *sadi = container_of(this, struct sprd_adi, restart_handler); @@ -366,40 +408,40 @@ static int sprd_adi_restart_handler(struct notifier_block *this, reboot_mode = HWRST_STATUS_NORMAL; /* Record the reboot mode */ - sprd_adi_read(sadi, sadi->slave_pbase + PMIC_RST_STATUS, &val); + sprd_adi_read(sadi, wdg->rst_sts, &val); val &= ~HWRST_STATUS_WATCHDOG; val |= reboot_mode; - sprd_adi_write(sadi, sadi->slave_pbase + PMIC_RST_STATUS, val); + sprd_adi_write(sadi, wdg->rst_sts, val); /* Enable the interface clock of the watchdog */ - sprd_adi_read(sadi, sadi->slave_pbase + PMIC_MODULE_EN, &val); + sprd_adi_read(sadi, wdg->wdg_en, &val); val |= BIT_WDG_EN; - sprd_adi_write(sadi, sadi->slave_pbase + PMIC_MODULE_EN, val); + sprd_adi_write(sadi, wdg->wdg_en, val); /* Enable the work clock of the watchdog */ - sprd_adi_read(sadi, sadi->slave_pbase + PMIC_CLK_EN, &val); + sprd_adi_read(sadi, wdg->wdg_clk, &val); val |= BIT_WDG_EN; - sprd_adi_write(sadi, sadi->slave_pbase + PMIC_CLK_EN, val); + sprd_adi_write(sadi, wdg->wdg_clk, val); /* Unlock the watchdog */ - sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOCK, WDG_UNLOCK_KEY); + sprd_adi_write(sadi, wdg->base + REG_WDG_LOCK, WDG_UNLOCK_KEY); - sprd_adi_read(sadi, sadi->slave_pbase + REG_WDG_CTRL, &val); + sprd_adi_read(sadi, wdg->base + REG_WDG_CTRL, &val); val |= BIT_WDG_NEW; - sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_CTRL, val); + sprd_adi_write(sadi, wdg->base + REG_WDG_CTRL, val); /* Load the watchdog timeout value, 50ms is always enough. */ - sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOAD_HIGH, 0); - sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOAD_LOW, + sprd_adi_write(sadi, wdg->base + REG_WDG_LOAD_HIGH, 0); + sprd_adi_write(sadi, wdg->base + REG_WDG_LOAD_LOW, WDG_LOAD_VAL & WDG_LOAD_MASK); /* Start the watchdog to reset system */ - sprd_adi_read(sadi, sadi->slave_pbase + REG_WDG_CTRL, &val); + sprd_adi_read(sadi, wdg->base + REG_WDG_CTRL, &val); val |= BIT_WDG_RUN | BIT_WDG_RST; - sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_CTRL, val); + sprd_adi_write(sadi, wdg->base + REG_WDG_CTRL, val); /* Lock the watchdog */ - sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOCK, ~WDG_UNLOCK_KEY); + sprd_adi_write(sadi, wdg->base + REG_WDG_LOCK, ~WDG_UNLOCK_KEY); mdelay(1000); @@ -407,6 +449,19 @@ static int sprd_adi_restart_handler(struct notifier_block *this, return NOTIFY_DONE; } +static int sprd_adi_restart_sc9860(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + struct sprd_adi_wdg wdg = { + .base = PMIC_WDG_BASE, + .rst_sts = PMIC_RST_STATUS, + .wdg_en = PMIC_MODULE_EN, + .wdg_clk = PMIC_CLK_EN, + }; + + return sprd_adi_restart(this, mode, cmd, &wdg); +} + static void sprd_adi_hw_init(struct sprd_adi *sadi) { struct device_node *np = sadi->dev->of_node; @@ -458,10 +513,11 @@ static void sprd_adi_hw_init(struct sprd_adi *sadi) static int sprd_adi_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; + const struct sprd_adi_data *data; struct spi_controller *ctlr; struct sprd_adi *sadi; struct resource *res; - u32 num_chipselect; + u16 num_chipselect; int ret; if (!np) { @@ -469,6 +525,12 @@ static int sprd_adi_probe(struct platform_device *pdev) return -ENODEV; } + data = of_device_get_match_data(&pdev->dev); + if (!data) { + dev_err(&pdev->dev, "no matching driver data found\n"); + return -EINVAL; + } + pdev->id = of_alias_get_id(np, "spi"); num_chipselect = of_get_child_count(np); @@ -486,10 +548,12 @@ static int sprd_adi_probe(struct platform_device *pdev) goto put_ctlr; } - sadi->slave_vbase = (unsigned long)sadi->base + ADI_SLAVE_OFFSET; - sadi->slave_pbase = res->start + ADI_SLAVE_OFFSET; + sadi->slave_vbase = (unsigned long)sadi->base + + data->slave_offset; + sadi->slave_pbase = res->start + data->slave_offset; sadi->ctlr = ctlr; sadi->dev = &pdev->dev; + sadi->data = data; ret = of_hwspin_lock_get_id(np, 0); if (ret > 0 || (IS_ENABLED(CONFIG_HWSPINLOCK) && ret == 0)) { sadi->hwlock = @@ -510,7 +574,9 @@ static int sprd_adi_probe(struct platform_device *pdev) } sprd_adi_hw_init(sadi); - sprd_adi_set_wdt_rst_mode(sadi); + + if (sadi->data->wdg_rst) + sadi->data->wdg_rst(sadi); ctlr->dev.of_node = pdev->dev.of_node; ctlr->bus_num = pdev->id; @@ -525,12 +591,14 @@ static int sprd_adi_probe(struct platform_device *pdev) goto put_ctlr; } - sadi->restart_handler.notifier_call = sprd_adi_restart_handler; - sadi->restart_handler.priority = 128; - ret = register_restart_handler(&sadi->restart_handler); - if (ret) { - dev_err(&pdev->dev, "can not register restart handler\n"); - goto put_ctlr; + if (sadi->data->restart) { + sadi->restart_handler.notifier_call = sadi->data->restart; + sadi->restart_handler.priority = 128; + ret = register_restart_handler(&sadi->restart_handler); + if (ret) { + dev_err(&pdev->dev, "can not register restart handler\n"); + goto put_ctlr; + } } return 0; @@ -549,9 +617,38 @@ static int sprd_adi_remove(struct platform_device *pdev) return 0; } +static struct sprd_adi_data sc9860_data = { + .slave_offset = ADI_10BIT_SLAVE_OFFSET, + .slave_addr_size = ADI_10BIT_SLAVE_ADDR_SIZE, + .read_check = sprd_adi_read_check_r2, + .restart = sprd_adi_restart_sc9860, + .wdg_rst = sprd_adi_set_wdt_rst_mode, +}; + +static struct sprd_adi_data sc9863_data = { + .slave_offset = ADI_12BIT_SLAVE_OFFSET, + .slave_addr_size = ADI_12BIT_SLAVE_ADDR_SIZE, + .read_check = sprd_adi_read_check_r3, +}; + +static struct sprd_adi_data ums512_data = { + .slave_offset = ADI_15BIT_SLAVE_OFFSET, + .slave_addr_size = ADI_15BIT_SLAVE_ADDR_SIZE, + .read_check = sprd_adi_read_check_r3, +}; + static const struct of_device_id sprd_adi_of_match[] = { { .compatible = "sprd,sc9860-adi", + .data = &sc9860_data, + }, + { + .compatible = "sprd,sc9863-adi", + .data = &sc9863_data, + }, + { + .compatible = "sprd,ums512-adi", + .data = &ums512_data, }, { }, }; diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 05618a618939..9bd3fd1652f7 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -162,6 +162,8 @@ #define SPI_3WIRE_TX 3 #define SPI_3WIRE_RX 4 +#define STM32_SPI_AUTOSUSPEND_DELAY 1 /* 1 ms */ + /* * use PIO for small transfers, avoiding DMA setup/teardown overhead for drivers * without fifo buffers. @@ -568,29 +570,30 @@ static void stm32f4_spi_read_rx(struct stm32_spi *spi) /** * stm32h7_spi_read_rxfifo - Read bytes in Receive Data Register * @spi: pointer to the spi controller data structure - * @flush: boolean indicating that FIFO should be flushed * * Write in rx_buf depends on remaining bytes to avoid to write beyond * rx_buf end. */ -static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi, bool flush) +static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi) { u32 sr = readl_relaxed(spi->base + STM32H7_SPI_SR); u32 rxplvl = FIELD_GET(STM32H7_SPI_SR_RXPLVL, sr); while ((spi->rx_len > 0) && ((sr & STM32H7_SPI_SR_RXP) || - (flush && ((sr & STM32H7_SPI_SR_RXWNE) || (rxplvl > 0))))) { + ((sr & STM32H7_SPI_SR_EOT) && + ((sr & STM32H7_SPI_SR_RXWNE) || (rxplvl > 0))))) { u32 offs = spi->cur_xferlen - spi->rx_len; if ((spi->rx_len >= sizeof(u32)) || - (flush && (sr & STM32H7_SPI_SR_RXWNE))) { + (sr & STM32H7_SPI_SR_RXWNE)) { u32 *rx_buf32 = (u32 *)(spi->rx_buf + offs); *rx_buf32 = readl_relaxed(spi->base + STM32H7_SPI_RXDR); spi->rx_len -= sizeof(u32); } else if ((spi->rx_len >= sizeof(u16)) || - (flush && (rxplvl >= 2 || spi->cur_bpw > 8))) { + (!(sr & STM32H7_SPI_SR_RXWNE) && + (rxplvl >= 2 || spi->cur_bpw > 8))) { u16 *rx_buf16 = (u16 *)(spi->rx_buf + offs); *rx_buf16 = readw_relaxed(spi->base + STM32H7_SPI_RXDR); @@ -606,8 +609,8 @@ static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi, bool flush) rxplvl = FIELD_GET(STM32H7_SPI_SR_RXPLVL, sr); } - dev_dbg(spi->dev, "%s%s: %d bytes left\n", __func__, - flush ? "(flush)" : "", spi->rx_len); + dev_dbg(spi->dev, "%s: %d bytes left (sr=%08x)\n", + __func__, spi->rx_len, sr); } /** @@ -674,18 +677,12 @@ static void stm32f4_spi_disable(struct stm32_spi *spi) * stm32h7_spi_disable - Disable SPI controller * @spi: pointer to the spi controller data structure * - * RX-Fifo is flushed when SPI controller is disabled. To prevent any data - * loss, use stm32h7_spi_read_rxfifo(flush) to read the remaining bytes in - * RX-Fifo. - * Normally, if TSIZE has been configured, we should relax the hardware at the - * reception of the EOT interrupt. But in case of error, EOT will not be - * raised. So the subsystem unprepare_message call allows us to properly - * complete the transfer from an hardware point of view. + * RX-Fifo is flushed when SPI controller is disabled. */ static void stm32h7_spi_disable(struct stm32_spi *spi) { unsigned long flags; - u32 cr1, sr; + u32 cr1; dev_dbg(spi->dev, "disable controller\n"); @@ -698,25 +695,6 @@ static void stm32h7_spi_disable(struct stm32_spi *spi) return; } - /* Wait on EOT or suspend the flow */ - if (readl_relaxed_poll_timeout_atomic(spi->base + STM32H7_SPI_SR, - sr, !(sr & STM32H7_SPI_SR_EOT), - 10, 100000) < 0) { - if (cr1 & STM32H7_SPI_CR1_CSTART) { - writel_relaxed(cr1 | STM32H7_SPI_CR1_CSUSP, - spi->base + STM32H7_SPI_CR1); - if (readl_relaxed_poll_timeout_atomic( - spi->base + STM32H7_SPI_SR, - sr, !(sr & STM32H7_SPI_SR_SUSP), - 10, 100000) < 0) - dev_warn(spi->dev, - "Suspend request timeout\n"); - } - } - - if (!spi->cur_usedma && spi->rx_buf && (spi->rx_len > 0)) - stm32h7_spi_read_rxfifo(spi, true); - if (spi->cur_usedma && spi->dma_tx) dmaengine_terminate_all(spi->dma_tx); if (spi->cur_usedma && spi->dma_rx) @@ -911,7 +889,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) if (__ratelimit(&rs)) dev_dbg_ratelimited(spi->dev, "Communication suspended\n"); if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) - stm32h7_spi_read_rxfifo(spi, false); + stm32h7_spi_read_rxfifo(spi); /* * If communication is suspended while using DMA, it means * that something went wrong, so stop the current transfer @@ -932,8 +910,10 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) if (sr & STM32H7_SPI_SR_EOT) { if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) - stm32h7_spi_read_rxfifo(spi, true); - end = true; + stm32h7_spi_read_rxfifo(spi); + if (!spi->cur_usedma || + (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX)) + end = true; } if (sr & STM32H7_SPI_SR_TXP) @@ -942,7 +922,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) if (sr & STM32H7_SPI_SR_RXP) if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) - stm32h7_spi_read_rxfifo(spi, false); + stm32h7_spi_read_rxfifo(spi); writel_relaxed(sr & mask, spi->base + STM32H7_SPI_IFCR); @@ -1041,42 +1021,17 @@ static void stm32f4_spi_dma_tx_cb(void *data) } /** - * stm32f4_spi_dma_rx_cb - dma callback + * stm32_spi_dma_rx_cb - dma callback * @data: pointer to the spi controller data structure * * DMA callback is called when the transfer is complete for DMA RX channel. */ -static void stm32f4_spi_dma_rx_cb(void *data) +static void stm32_spi_dma_rx_cb(void *data) { struct stm32_spi *spi = data; spi_finalize_current_transfer(spi->master); - stm32f4_spi_disable(spi); -} - -/** - * stm32h7_spi_dma_cb - dma callback - * @data: pointer to the spi controller data structure - * - * DMA callback is called when the transfer is complete or when an error - * occurs. If the transfer is complete, EOT flag is raised. - */ -static void stm32h7_spi_dma_cb(void *data) -{ - struct stm32_spi *spi = data; - unsigned long flags; - u32 sr; - - spin_lock_irqsave(&spi->lock, flags); - - sr = readl_relaxed(spi->base + STM32H7_SPI_SR); - - spin_unlock_irqrestore(&spi->lock, flags); - - if (!(sr & STM32H7_SPI_SR_EOT)) - dev_warn(spi->dev, "DMA error (sr=0x%08x)\n", sr); - - /* Now wait for EOT, or SUSP or OVR in case of error */ + spi->cfg->disable(spi); } /** @@ -1242,11 +1197,13 @@ static void stm32f4_spi_transfer_one_dma_start(struct stm32_spi *spi) */ static void stm32h7_spi_transfer_one_dma_start(struct stm32_spi *spi) { - /* Enable the interrupts relative to the end of transfer */ - stm32_spi_set_bits(spi, STM32H7_SPI_IER, STM32H7_SPI_IER_EOTIE | - STM32H7_SPI_IER_TXTFIE | - STM32H7_SPI_IER_OVRIE | - STM32H7_SPI_IER_MODFIE); + uint32_t ier = STM32H7_SPI_IER_OVRIE | STM32H7_SPI_IER_MODFIE; + + /* Enable the interrupts */ + if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX) + ier |= STM32H7_SPI_IER_EOTIE | STM32H7_SPI_IER_TXTFIE; + + stm32_spi_set_bits(spi, STM32H7_SPI_IER, ier); stm32_spi_enable(spi); @@ -1645,10 +1602,6 @@ static int stm32_spi_transfer_one(struct spi_master *master, struct stm32_spi *spi = spi_master_get_devdata(master); int ret; - /* Don't do anything on 0 bytes transfers */ - if (transfer->len == 0) - return 0; - spi->tx_buf = transfer->tx_buf; spi->rx_buf = transfer->rx_buf; spi->tx_len = spi->tx_buf ? transfer->len : 0; @@ -1762,7 +1715,7 @@ static const struct stm32_spi_cfg stm32f4_spi_cfg = { .set_mode = stm32f4_spi_set_mode, .transfer_one_dma_start = stm32f4_spi_transfer_one_dma_start, .dma_tx_cb = stm32f4_spi_dma_tx_cb, - .dma_rx_cb = stm32f4_spi_dma_rx_cb, + .dma_rx_cb = stm32_spi_dma_rx_cb, .transfer_one_irq = stm32f4_spi_transfer_one_irq, .irq_handler_event = stm32f4_spi_irq_event, .irq_handler_thread = stm32f4_spi_irq_thread, @@ -1782,8 +1735,11 @@ static const struct stm32_spi_cfg stm32h7_spi_cfg = { .set_data_idleness = stm32h7_spi_data_idleness, .set_number_of_data = stm32h7_spi_number_of_data, .transfer_one_dma_start = stm32h7_spi_transfer_one_dma_start, - .dma_rx_cb = stm32h7_spi_dma_cb, - .dma_tx_cb = stm32h7_spi_dma_cb, + .dma_rx_cb = stm32_spi_dma_rx_cb, + /* + * dma_tx_cb is not necessary since in case of TX, dma is followed by + * SPI access hence handling is performed within the SPI interrupt + */ .transfer_one_irq = stm32h7_spi_transfer_one_irq, .irq_handler_thread = stm32h7_spi_irq_thread, .baud_rate_div_min = STM32H7_SPI_MBR_DIV_MIN, @@ -1927,6 +1883,9 @@ static int stm32_spi_probe(struct platform_device *pdev) if (spi->dma_tx || spi->dma_rx) master->can_dma = stm32_spi_can_dma; + pm_runtime_set_autosuspend_delay(&pdev->dev, + STM32_SPI_AUTOSUSPEND_DELAY); + pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_active(&pdev->dev); pm_runtime_get_noresume(&pdev->dev); pm_runtime_enable(&pdev->dev); @@ -1938,6 +1897,9 @@ static int stm32_spi_probe(struct platform_device *pdev) goto err_pm_disable; } + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); + dev_info(&pdev->dev, "driver initialized\n"); return 0; @@ -1946,6 +1908,7 @@ err_pm_disable: pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); err_dma_release: if (spi->dma_tx) dma_release_channel(spi->dma_tx); @@ -1970,6 +1933,8 @@ static int stm32_spi_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); + if (master->dma_tx) dma_release_channel(master->dma_tx); if (master->dma_rx) diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index 5131141bbf0d..e9de1d958bbd 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -717,12 +717,12 @@ static void tegra_spi_deinit_dma_param(struct tegra_spi_data *tspi, dma_release_channel(dma_chan); } -static int tegra_spi_set_hw_cs_timing(struct spi_device *spi, - struct spi_delay *setup, - struct spi_delay *hold, - struct spi_delay *inactive) +static int tegra_spi_set_hw_cs_timing(struct spi_device *spi) { struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master); + struct spi_delay *setup = &spi->cs_setup; + struct spi_delay *hold = &spi->cs_hold; + struct spi_delay *inactive = &spi->cs_inactive; u8 setup_dly, hold_dly, inactive_dly; u32 setup_hold; u32 spi_cs_timing; diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index 6a726c95ac7a..ebd27f883033 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -1061,33 +1061,12 @@ static int tegra_slink_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Can not get clock %d\n", ret); goto exit_free_master; } - ret = clk_prepare(tspi->clk); - if (ret < 0) { - dev_err(&pdev->dev, "Clock prepare failed %d\n", ret); - goto exit_free_master; - } - ret = clk_enable(tspi->clk); - if (ret < 0) { - dev_err(&pdev->dev, "Clock enable failed %d\n", ret); - goto exit_clk_unprepare; - } - - spi_irq = platform_get_irq(pdev, 0); - tspi->irq = spi_irq; - ret = request_threaded_irq(tspi->irq, tegra_slink_isr, - tegra_slink_isr_thread, IRQF_ONESHOT, - dev_name(&pdev->dev), tspi); - if (ret < 0) { - dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n", - tspi->irq); - goto exit_clk_disable; - } tspi->rst = devm_reset_control_get_exclusive(&pdev->dev, "spi"); if (IS_ERR(tspi->rst)) { dev_err(&pdev->dev, "can not get reset\n"); ret = PTR_ERR(tspi->rst); - goto exit_free_irq; + goto exit_free_master; } tspi->max_buf_size = SLINK_FIFO_DEPTH << 2; @@ -1095,7 +1074,7 @@ static int tegra_slink_probe(struct platform_device *pdev) ret = tegra_slink_init_dma_param(tspi, true); if (ret < 0) - goto exit_free_irq; + goto exit_free_master; ret = tegra_slink_init_dma_param(tspi, false); if (ret < 0) goto exit_rx_dma_free; @@ -1106,16 +1085,9 @@ static int tegra_slink_probe(struct platform_device *pdev) init_completion(&tspi->xfer_completion); pm_runtime_enable(&pdev->dev); - if (!pm_runtime_enabled(&pdev->dev)) { - ret = tegra_slink_runtime_resume(&pdev->dev); - if (ret) - goto exit_pm_disable; - } - - ret = pm_runtime_get_sync(&pdev->dev); - if (ret < 0) { + ret = pm_runtime_resume_and_get(&pdev->dev); + if (ret) { dev_err(&pdev->dev, "pm runtime get failed, e = %d\n", ret); - pm_runtime_put_noidle(&pdev->dev); goto exit_pm_disable; } @@ -1123,33 +1095,43 @@ static int tegra_slink_probe(struct platform_device *pdev) udelay(2); reset_control_deassert(tspi->rst); + spi_irq = platform_get_irq(pdev, 0); + tspi->irq = spi_irq; + ret = request_threaded_irq(tspi->irq, tegra_slink_isr, + tegra_slink_isr_thread, IRQF_ONESHOT, + dev_name(&pdev->dev), tspi); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n", + tspi->irq); + goto exit_pm_put; + } + tspi->def_command_reg = SLINK_M_S; tspi->def_command2_reg = SLINK_CS_ACTIVE_BETWEEN; tegra_slink_writel(tspi, tspi->def_command_reg, SLINK_COMMAND); tegra_slink_writel(tspi, tspi->def_command2_reg, SLINK_COMMAND2); - pm_runtime_put(&pdev->dev); master->dev.of_node = pdev->dev.of_node; - ret = devm_spi_register_master(&pdev->dev, master); + ret = spi_register_master(master); if (ret < 0) { dev_err(&pdev->dev, "can not register to master err %d\n", ret); - goto exit_pm_disable; + goto exit_free_irq; } + + pm_runtime_put(&pdev->dev); + return ret; +exit_free_irq: + free_irq(spi_irq, tspi); +exit_pm_put: + pm_runtime_put(&pdev->dev); exit_pm_disable: pm_runtime_disable(&pdev->dev); - if (!pm_runtime_status_suspended(&pdev->dev)) - tegra_slink_runtime_suspend(&pdev->dev); + tegra_slink_deinit_dma_param(tspi, false); exit_rx_dma_free: tegra_slink_deinit_dma_param(tspi, true); -exit_free_irq: - free_irq(spi_irq, tspi); -exit_clk_disable: - clk_disable(tspi->clk); -exit_clk_unprepare: - clk_unprepare(tspi->clk); exit_free_master: spi_master_put(master); return ret; @@ -1160,10 +1142,11 @@ static int tegra_slink_remove(struct platform_device *pdev) struct spi_master *master = platform_get_drvdata(pdev); struct tegra_slink_data *tspi = spi_master_get_devdata(master); + spi_unregister_master(master); + free_irq(tspi->irq, tspi); - clk_disable(tspi->clk); - clk_unprepare(tspi->clk); + pm_runtime_disable(&pdev->dev); if (tspi->tx_dma_chan) tegra_slink_deinit_dma_param(tspi, false); @@ -1171,10 +1154,6 @@ static int tegra_slink_remove(struct platform_device *pdev) if (tspi->rx_dma_chan) tegra_slink_deinit_dma_param(tspi, true); - pm_runtime_disable(&pdev->dev); - if (!pm_runtime_status_suspended(&pdev->dev)) - tegra_slink_runtime_suspend(&pdev->dev); - return 0; } diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c index 9262c6418463..cfa222c9bd5e 100644 --- a/drivers/spi/spi-zynq-qspi.c +++ b/drivers/spi/spi-zynq-qspi.c @@ -545,7 +545,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem, zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true); zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET, ZYNQ_QSPI_IXR_RXTX_MASK); - if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion, + if (!wait_for_completion_timeout(&xqspi->data_completion, msecs_to_jiffies(1000))) err = -ETIMEDOUT; } @@ -563,7 +563,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem, zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true); zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET, ZYNQ_QSPI_IXR_RXTX_MASK); - if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion, + if (!wait_for_completion_timeout(&xqspi->data_completion, msecs_to_jiffies(1000))) err = -ETIMEDOUT; } @@ -579,7 +579,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem, zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true); zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET, ZYNQ_QSPI_IXR_RXTX_MASK); - if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion, + if (!wait_for_completion_timeout(&xqspi->data_completion, msecs_to_jiffies(1000))) err = -ETIMEDOUT; @@ -603,7 +603,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem, zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true); zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET, ZYNQ_QSPI_IXR_RXTX_MASK); - if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion, + if (!wait_for_completion_timeout(&xqspi->data_completion, msecs_to_jiffies(1000))) err = -ETIMEDOUT; } diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index e4dc593b1f32..65d14af9c015 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -846,9 +846,9 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force) if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) || !spi->controller->set_cs_timing) { if (activate) - spi_delay_exec(&spi->controller->cs_setup, NULL); + spi_delay_exec(&spi->cs_setup, NULL); else - spi_delay_exec(&spi->controller->cs_hold, NULL); + spi_delay_exec(&spi->cs_hold, NULL); } if (spi->mode & SPI_CS_HIGH) @@ -891,7 +891,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force) if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) || !spi->controller->set_cs_timing) { if (!activate) - spi_delay_exec(&spi->controller->cs_inactive, NULL); + spi_delay_exec(&spi->cs_inactive, NULL); } } |