summaryrefslogtreecommitdiff
path: root/drivers/thunderbolt
diff options
context:
space:
mode:
authorGil Fine <gil.fine@intel.com>2021-12-17 04:16:39 +0300
committerMika Westerberg <mika.westerberg@linux.intel.com>2021-12-22 17:13:14 +0300
commit8a90e4fa3b4d6a10c96b0a04abf57bb5a16a8f4e (patch)
tree6c827d6d67aa7d5250f9d06dc59457493a5a1ca4 /drivers/thunderbolt
parenta28ec0e165ba2f90568828a2578aaa8540e13bc5 (diff)
downloadlinux-8a90e4fa3b4d6a10c96b0a04abf57bb5a16a8f4e.tar.xz
thunderbolt: Add CL0s support for USB4 routers
In this patch we add enabling of CL0s - a low power state of the link. Low power states (called collectively CLx) are used to reduce transmitter and receiver power when a high-speed lane is idle. For now, we add support only for first low power state: CL0s. We enable it, if both sides of the link support it, and only for the first hop router. (i.e. the first device that connected to the host router). This is needed for better thermal management. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Diffstat (limited to 'drivers/thunderbolt')
-rw-r--r--drivers/thunderbolt/switch.c263
-rw-r--r--drivers/thunderbolt/tb.c9
-rw-r--r--drivers/thunderbolt/tb.h51
-rw-r--r--drivers/thunderbolt/tb_regs.h6
-rw-r--r--drivers/thunderbolt/usb4.c20
5 files changed, 348 insertions, 1 deletions
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 13f9230104d7..8e232ce615e9 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -3223,3 +3223,266 @@ struct tb_port *tb_switch_find_port(struct tb_switch *sw,
return NULL;
}
+
+static int __tb_port_pm_secondary_set(struct tb_port *port, bool secondary)
+{
+ u32 phy;
+ int ret;
+
+ ret = tb_port_read(port, &phy, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+ if (ret)
+ return ret;
+
+ if (secondary)
+ phy |= LANE_ADP_CS_1_PMS;
+ else
+ phy &= ~LANE_ADP_CS_1_PMS;
+
+ return tb_port_write(port, &phy, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+}
+
+static int tb_port_pm_secondary_enable(struct tb_port *port)
+{
+ return __tb_port_pm_secondary_set(port, true);
+}
+
+static int tb_port_pm_secondary_disable(struct tb_port *port)
+{
+ return __tb_port_pm_secondary_set(port, false);
+}
+
+static int tb_switch_pm_secondary_resolve(struct tb_switch *sw)
+{
+ struct tb_switch *parent = tb_switch_parent(sw);
+ struct tb_port *up, *down;
+ int ret;
+
+ if (!tb_route(sw))
+ return 0;
+
+ up = tb_upstream_port(sw);
+ down = tb_port_at(tb_route(sw), parent);
+ ret = tb_port_pm_secondary_enable(up);
+ if (ret)
+ return ret;
+
+ return tb_port_pm_secondary_disable(down);
+}
+
+static bool tb_port_clx_supported(struct tb_port *port, enum tb_clx clx)
+{
+ u32 mask, val;
+ bool ret;
+
+ /* Don't enable CLx in case of two single-lane links */
+ if (!port->bonded && port->dual_link_port)
+ return false;
+
+ /* Don't enable CLx in case of inter-domain link */
+ if (port->xdomain)
+ return false;
+
+ if (!usb4_port_clx_supported(port))
+ return false;
+
+ switch (clx) {
+ case TB_CL0S:
+ /* CL0s support requires also CL1 support */
+ mask = LANE_ADP_CS_0_CL0S_SUPPORT | LANE_ADP_CS_0_CL1_SUPPORT;
+ break;
+
+ /* For now we support only CL0s. Not CL1, CL2 */
+ case TB_CL1:
+ case TB_CL2:
+ default:
+ return false;
+ }
+
+ ret = tb_port_read(port, &val, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_0, 1);
+ if (ret)
+ return false;
+
+ return !!(val & mask);
+}
+
+static inline bool tb_port_cl0s_supported(struct tb_port *port)
+{
+ return tb_port_clx_supported(port, TB_CL0S);
+}
+
+static int __tb_port_cl0s_set(struct tb_port *port, bool enable)
+{
+ u32 phy, mask;
+ int ret;
+
+ /* To enable CL0s also required to enable CL1 */
+ mask = LANE_ADP_CS_1_CL0S_ENABLE | LANE_ADP_CS_1_CL1_ENABLE;
+ ret = tb_port_read(port, &phy, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+ if (ret)
+ return ret;
+
+ if (enable)
+ phy |= mask;
+ else
+ phy &= ~mask;
+
+ return tb_port_write(port, &phy, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+}
+
+static int tb_port_cl0s_disable(struct tb_port *port)
+{
+ return __tb_port_cl0s_set(port, false);
+}
+
+static int tb_port_cl0s_enable(struct tb_port *port)
+{
+ return __tb_port_cl0s_set(port, true);
+}
+
+static int tb_switch_enable_cl0s(struct tb_switch *sw)
+{
+ struct tb_switch *parent = tb_switch_parent(sw);
+ bool up_cl0s_support, down_cl0s_support;
+ struct tb_port *up, *down;
+ int ret;
+
+ if (!tb_switch_is_usb4(sw))
+ return 0;
+
+ /*
+ * Enable CLx for host router's downstream port as part of the
+ * downstream router enabling procedure.
+ */
+ if (!tb_route(sw))
+ return 0;
+
+ /* Enable CLx only for first hop router (depth = 1) */
+ if (tb_route(parent))
+ return 0;
+
+ ret = tb_switch_pm_secondary_resolve(sw);
+ if (ret)
+ return ret;
+
+ up = tb_upstream_port(sw);
+ down = tb_port_at(tb_route(sw), parent);
+
+ up_cl0s_support = tb_port_cl0s_supported(up);
+ down_cl0s_support = tb_port_cl0s_supported(down);
+
+ tb_port_dbg(up, "CL0s %ssupported\n",
+ up_cl0s_support ? "" : "not ");
+ tb_port_dbg(down, "CL0s %ssupported\n",
+ down_cl0s_support ? "" : "not ");
+
+ if (!up_cl0s_support || !down_cl0s_support)
+ return -EOPNOTSUPP;
+
+ ret = tb_port_cl0s_enable(up);
+ if (ret)
+ return ret;
+
+ ret = tb_port_cl0s_enable(down);
+ if (ret) {
+ tb_port_cl0s_disable(up);
+ return ret;
+ }
+
+ sw->clx = TB_CL0S;
+
+ tb_port_dbg(up, "CL0s enabled\n");
+ return 0;
+}
+
+/**
+ * tb_switch_enable_clx() - Enable CLx on upstream port of specified router
+ * @sw: Router to enable CLx for
+ * @clx: The CLx state to enable
+ *
+ * Enable CLx state only for first hop router. That is the most common
+ * use-case, that is intended for better thermal management, and so helps
+ * to improve performance. CLx is enabled only if both sides of the link
+ * support CLx, and if both sides of the link are not configured as two
+ * single lane links and only if the link is not inter-domain link. The
+ * complete set of conditions is descibed in CM Guide 1.0 section 8.1.
+ *
+ * Return: Returns 0 on success or an error code on failure.
+ */
+int tb_switch_enable_clx(struct tb_switch *sw, enum tb_clx clx)
+{
+ struct tb_switch *root_sw = sw->tb->root_switch;
+
+ /*
+ * CLx is not enabled and validated on Intel USB4 platforms before
+ * Alder Lake.
+ */
+ if (root_sw->generation < 4 || tb_switch_is_tiger_lake(root_sw))
+ return 0;
+
+ switch (clx) {
+ case TB_CL0S:
+ return tb_switch_enable_cl0s(sw);
+
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int tb_switch_disable_cl0s(struct tb_switch *sw)
+{
+ struct tb_switch *parent = tb_switch_parent(sw);
+ struct tb_port *up, *down;
+ int ret;
+
+ if (!tb_switch_is_usb4(sw))
+ return 0;
+
+ /*
+ * Disable CLx for host router's downstream port as part of the
+ * downstream router enabling procedure.
+ */
+ if (!tb_route(sw))
+ return 0;
+
+ /* Disable CLx only for first hop router (depth = 1) */
+ if (tb_route(parent))
+ return 0;
+
+ up = tb_upstream_port(sw);
+ down = tb_port_at(tb_route(sw), parent);
+ ret = tb_port_cl0s_disable(up);
+ if (ret)
+ return ret;
+
+ ret = tb_port_cl0s_disable(down);
+ if (ret)
+ return ret;
+
+ sw->clx = TB_CLX_DISABLE;
+
+ tb_port_dbg(up, "CL0s disabled\n");
+ return 0;
+}
+
+/**
+ * tb_switch_disable_clx() - Disable CLx on upstream port of specified router
+ * @sw: Router to disable CLx for
+ * @clx: The CLx state to disable
+ *
+ * Return: Returns 0 on success or an error code on failure.
+ */
+int tb_switch_disable_clx(struct tb_switch *sw, enum tb_clx clx)
+{
+ switch (clx) {
+ case TB_CL0S:
+ return tb_switch_disable_cl0s(sw);
+
+ default:
+ return -EOPNOTSUPP;
+ }
+}
diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index 7ed02d86eabd..1454dc5b6b91 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -669,7 +669,11 @@ static void tb_scan_port(struct tb_port *port)
tb_switch_lane_bonding_enable(sw);
/* Set the link configured */
tb_switch_configure_link(sw);
- tb_switch_tmu_configure(sw, TB_SWITCH_TMU_RATE_HIFI, false);
+ if (tb_switch_enable_clx(sw, TB_CL0S))
+ tb_sw_warn(sw, "failed to enable CLx on upstream port\n");
+
+ tb_switch_tmu_configure(sw, TB_SWITCH_TMU_RATE_HIFI,
+ tb_switch_is_clx_enabled(sw));
if (tb_enable_tmu(sw))
tb_sw_warn(sw, "failed to enable TMU\n");
@@ -1420,6 +1424,9 @@ static void tb_restore_children(struct tb_switch *sw)
if (sw->is_unplugged)
return;
+ if (tb_switch_enable_clx(sw, TB_CL0S))
+ tb_sw_warn(sw, "failed to re-enable CLx on upstream port\n");
+
/*
* tb_switch_tmu_configure() was already called when the switch was
* added before entering system sleep or runtime suspend,
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index b4487354e117..4ec89df69571 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -109,6 +109,13 @@ struct tb_switch_tmu {
enum tb_switch_tmu_rate rate_request;
};
+enum tb_clx {
+ TB_CLX_DISABLE,
+ TB_CL0S,
+ TB_CL1,
+ TB_CL2,
+};
+
/**
* struct tb_switch - a thunderbolt switch
* @dev: Device for the switch
@@ -157,6 +164,7 @@ struct tb_switch_tmu {
* @min_dp_main_credits: Router preferred minimum number of buffers for DP MAIN
* @max_pcie_credits: Router preferred number of buffers for PCIe
* @max_dma_credits: Router preferred number of buffers for DMA/P2P
+ * @clx: CLx state on the upstream link of the router
*
* When the switch is being added or removed to the domain (other
* switches) you need to have domain lock held.
@@ -205,6 +213,7 @@ struct tb_switch {
unsigned int min_dp_main_credits;
unsigned int max_pcie_credits;
unsigned int max_dma_credits;
+ enum tb_clx clx;
};
/**
@@ -862,6 +871,20 @@ static inline bool tb_switch_is_titan_ridge(const struct tb_switch *sw)
return false;
}
+static inline bool tb_switch_is_tiger_lake(const struct tb_switch *sw)
+{
+ if (sw->config.vendor_id == PCI_VENDOR_ID_INTEL) {
+ switch (sw->config.device_id) {
+ case PCI_DEVICE_ID_INTEL_TGL_NHI0:
+ case PCI_DEVICE_ID_INTEL_TGL_NHI1:
+ case PCI_DEVICE_ID_INTEL_TGL_H_NHI0:
+ case PCI_DEVICE_ID_INTEL_TGL_H_NHI1:
+ return true;
+ }
+ }
+ return false;
+}
+
/**
* tb_switch_is_usb4() - Is the switch USB4 compliant
* @sw: Switch to check
@@ -918,6 +941,33 @@ static inline bool tb_switch_tmu_hifi_is_enabled(const struct tb_switch *sw,
sw->tmu.unidirectional == unidirectional;
}
+int tb_switch_enable_clx(struct tb_switch *sw, enum tb_clx clx);
+int tb_switch_disable_clx(struct tb_switch *sw, enum tb_clx clx);
+
+/**
+ * tb_switch_is_clx_enabled() - Checks if the CLx is enabled
+ * @sw: Router to check the CLx state for
+ *
+ * Checks if the CLx is enabled on the router upstream link.
+ * Not applicable for a host router.
+ */
+static inline bool tb_switch_is_clx_enabled(const struct tb_switch *sw)
+{
+ return sw->clx != TB_CLX_DISABLE;
+}
+
+/**
+ * tb_switch_is_cl0s_enabled() - Checks if the CL0s is enabled
+ * @sw: Router to check for the CL0s
+ *
+ * Checks if the CL0s is enabled on the router upstream link.
+ * Not applicable for a host router.
+ */
+static inline bool tb_switch_is_cl0s_enabled(const struct tb_switch *sw)
+{
+ return sw->clx == TB_CL0S;
+}
+
int tb_wait_for_port(struct tb_port *port, bool wait_if_unplugged);
int tb_port_add_nfc_credits(struct tb_port *port, int credits);
int tb_port_clear_counter(struct tb_port *port, int counter);
@@ -1097,6 +1147,7 @@ void usb4_port_unconfigure_xdomain(struct tb_port *port);
int usb4_port_router_offline(struct tb_port *port);
int usb4_port_router_online(struct tb_port *port);
int usb4_port_enumerate_retimers(struct tb_port *port);
+bool usb4_port_clx_supported(struct tb_port *port);
int usb4_port_retimer_set_inbound_sbtx(struct tb_port *port, u8 index);
int usb4_port_retimer_read(struct tb_port *port, u8 index, u8 reg, void *buf,
diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h
index eb58b1a88d55..50a567e31fda 100644
--- a/drivers/thunderbolt/tb_regs.h
+++ b/drivers/thunderbolt/tb_regs.h
@@ -313,11 +313,15 @@ struct tb_regs_port_header {
#define LANE_ADP_CS_0 0x00
#define LANE_ADP_CS_0_SUPPORTED_WIDTH_MASK GENMASK(25, 20)
#define LANE_ADP_CS_0_SUPPORTED_WIDTH_SHIFT 20
+#define LANE_ADP_CS_0_CL0S_SUPPORT BIT(26)
+#define LANE_ADP_CS_0_CL1_SUPPORT BIT(27)
#define LANE_ADP_CS_1 0x01
#define LANE_ADP_CS_1_TARGET_WIDTH_MASK GENMASK(9, 4)
#define LANE_ADP_CS_1_TARGET_WIDTH_SHIFT 4
#define LANE_ADP_CS_1_TARGET_WIDTH_SINGLE 0x1
#define LANE_ADP_CS_1_TARGET_WIDTH_DUAL 0x3
+#define LANE_ADP_CS_1_CL0S_ENABLE BIT(10)
+#define LANE_ADP_CS_1_CL1_ENABLE BIT(11)
#define LANE_ADP_CS_1_LD BIT(14)
#define LANE_ADP_CS_1_LB BIT(15)
#define LANE_ADP_CS_1_CURRENT_SPEED_MASK GENMASK(19, 16)
@@ -326,6 +330,7 @@ struct tb_regs_port_header {
#define LANE_ADP_CS_1_CURRENT_SPEED_GEN3 0x4
#define LANE_ADP_CS_1_CURRENT_WIDTH_MASK GENMASK(25, 20)
#define LANE_ADP_CS_1_CURRENT_WIDTH_SHIFT 20
+#define LANE_ADP_CS_1_PMS BIT(30)
/* USB4 port registers */
#define PORT_CS_1 0x01
@@ -341,6 +346,7 @@ struct tb_regs_port_header {
#define PORT_CS_18 0x12
#define PORT_CS_18_BE BIT(8)
#define PORT_CS_18_TCM BIT(9)
+#define PORT_CS_18_CPS BIT(10)
#define PORT_CS_18_WOU4S BIT(18)
#define PORT_CS_19 0x13
#define PORT_CS_19_PC BIT(3)
diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c
index ceddbe7e9f93..a95c3e9b88cd 100644
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -1386,6 +1386,26 @@ int usb4_port_enumerate_retimers(struct tb_port *port)
USB4_SB_OPCODE, &val, sizeof(val));
}
+/**
+ * usb4_port_clx_supported() - Check if CLx is supported by the link
+ * @port: Port to check for CLx support for
+ *
+ * PORT_CS_18_CPS bit reflects if the link supports CLx including
+ * active cables (if connected on the link).
+ */
+bool usb4_port_clx_supported(struct tb_port *port)
+{
+ int ret;
+ u32 val;
+
+ ret = tb_port_read(port, &val, TB_CFG_PORT,
+ port->cap_usb4 + PORT_CS_18, 1);
+ if (ret)
+ return false;
+
+ return !!(val & PORT_CS_18_CPS);
+}
+
static inline int usb4_port_retimer_op(struct tb_port *port, u8 index,
enum usb4_sb_opcode opcode,
int timeout_msec)