Merge tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.0-rc1.

  It was delayed from last week as I wanted to make sure the last commit
  here got some good testing in linux-next and elsewhere as it seemed to
  show up only late in testing for some reason.

  Nothing major here, just lots of cleanups from Jiri and Ilpo to make
  the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).

  Also included in here is the obligatory n_gsm updates from Daniel
  Starke and lots of tiny driver updates and minor fixes and tweaks for
  other smaller serial drivers.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
  tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
  tty: amiserial: Fix comment typo
  tty: serial: document uart_get_console()
  tty: serial: serial_core, reformat kernel-doc for functions
  Documentation: serial: link uart_ops properly
  Documentation: serial: move GPIO kernel-doc to the functions
  Documentation: serial: dedup kernel-doc for uart functions
  Documentation: serial: move uart_ops documentation to the struct
  dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
  serial: mvebu-uart: uart2 error bits clearing
  tty: serial: fsl_lpuart: correct the count of break characters
  serial: stm32: make info structs static to avoid sparse warnings
  serial: fsl_lpuart: zero out parity bit in CS7 mode
  tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
  tty: vt: initialize unicode screen buffer
  serial: remove VR41XX serial driver
  serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
  serial: 8250_dwlib: remove redundant sanity check for RS485 flags
  dt_bindings: rs485: Correct delay values
  ...

1 files changed, 207 insertions, 65 deletions

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index a0b6ea52d133..ab10ca4a45b5 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/gpio/driver.h>
+#include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/property.h>
@@ -72,7 +73,8 @@
 #define MAX310X_GLOBALCMD_REG		MAX310X_REG_1F /* Global Command (WO) */
 
 /* Extended registers */
-#define MAX310X_REVID_EXTREG		MAX310X_REG_05 /* Revision ID */
+#define MAX310X_SPI_REVID_EXTREG	MAX310X_REG_05 /* Revision ID */
+#define MAX310X_I2C_REVID_EXTREG	(0x25) /* Revision ID */
 
 /* IRQ register bits */
 #define MAX310X_IRQ_LSR_BIT		(1 << 0) /* LSR interrupt */
@@ -245,7 +247,17 @@
 #define MAX14830_BRGCFG_CLKDIS_BIT	(1 << 6) /* Clock Disable */
 #define MAX14830_REV_ID			(0xb0)
 
+struct max310x_if_cfg {
+	int (*extended_reg_enable)(struct device *dev, bool enable);
+
+	unsigned int rev_id_reg;
+};
+
 struct max310x_devtype {
+	struct {
+		unsigned short min;
+		unsigned short max;
+	} slave_addr;
 	char	name[9];
 	int	nr;
 	u8	mode1;
@@ -258,9 +270,8 @@ struct max310x_one {
 	struct work_struct	tx_work;
 	struct work_struct	md_work;
 	struct work_struct	rs_work;
+	struct regmap		*regmap;
 
-	u8 wr_header;
-	u8 rd_header;
 	u8 rx_buf[MAX310X_FIFO_SIZE];
 };
 #define to_max310x_port(_port) \
@@ -268,6 +279,7 @@ struct max310x_one {
 
 struct max310x_port {
 	const struct max310x_devtype *devtype;
+	const struct max310x_if_cfg *if_cfg;
 	struct regmap		*regmap;
 	struct clk		*clk;
 #ifdef CONFIG_GPIOLIB
@@ -289,26 +301,26 @@ static DECLARE_BITMAP(max310x_lines, MAX310X_UART_NRMAX);
 
 static u8 max310x_port_read(struct uart_port *port, u8 reg)
 {
-	struct max310x_port *s = dev_get_drvdata(port->dev);
+	struct max310x_one *one = to_max310x_port(port);
 	unsigned int val = 0;
 
-	regmap_read(s->regmap, port->iobase + reg, &val);
+	regmap_read(one->regmap, reg, &val);
 
 	return val;
 }
 
 static void max310x_port_write(struct uart_port *port, u8 reg, u8 val)
 {
-	struct max310x_port *s = dev_get_drvdata(port->dev);
+	struct max310x_one *one = to_max310x_port(port);
 
-	regmap_write(s->regmap, port->iobase + reg, val);
+	regmap_write(one->regmap, reg, val);
 }
 
 static void max310x_port_update(struct uart_port *port, u8 reg, u8 mask, u8 val)
 {
-	struct max310x_port *s = dev_get_drvdata(port->dev);
+	struct max310x_one *one = to_max310x_port(port);
 
-	regmap_update_bits(s->regmap, port->iobase + reg, mask, val);
+	regmap_update_bits(one->regmap, reg, mask, val);
 }
 
 static int max3107_detect(struct device *dev)
@@ -357,13 +369,12 @@ static int max3109_detect(struct device *dev)
 	unsigned int val = 0;
 	int ret;
 
-	ret = regmap_write(s->regmap, MAX310X_GLOBALCMD_REG,
-			   MAX310X_EXTREG_ENBL);
+	ret = s->if_cfg->extended_reg_enable(dev, true);
 	if (ret)
 		return ret;
 
-	regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val);
-	regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL);
+	regmap_read(s->regmap, s->if_cfg->rev_id_reg, &val);
+	s->if_cfg->extended_reg_enable(dev, false);
 	if (((val & MAX310x_REV_MASK) != MAX3109_REV_ID)) {
 		dev_err(dev,
 			"%s ID 0x%02x does not match\n", s->devtype->name, val);
@@ -388,13 +399,12 @@ static int max14830_detect(struct device *dev)
 	unsigned int val = 0;
 	int ret;
 
-	ret = regmap_write(s->regmap, MAX310X_GLOBALCMD_REG,
-			   MAX310X_EXTREG_ENBL);
+	ret = s->if_cfg->extended_reg_enable(dev, true);
 	if (ret)
 		return ret;
 	
-	regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val);
-	regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL);
+	regmap_read(s->regmap, s->if_cfg->rev_id_reg, &val);
+	s->if_cfg->extended_reg_enable(dev, false);
 	if (((val & MAX310x_REV_MASK) != MAX14830_REV_ID)) {
 		dev_err(dev,
 			"%s ID 0x%02x does not match\n", s->devtype->name, val);
@@ -419,6 +429,10 @@ static const struct max310x_devtype max3107_devtype = {
 	.mode1	= MAX310X_MODE1_AUTOSLEEP_BIT | MAX310X_MODE1_IRQSEL_BIT,
 	.detect	= max3107_detect,
 	.power	= max310x_power,
+	.slave_addr	= {
+		.min = 0x2c,
+		.max = 0x2f,
+	},
 };
 
 static const struct max310x_devtype max3108_devtype = {
@@ -427,6 +441,10 @@ static const struct max310x_devtype max3108_devtype = {
 	.mode1	= MAX310X_MODE1_AUTOSLEEP_BIT,
 	.detect	= max3108_detect,
 	.power	= max310x_power,
+	.slave_addr	= {
+		.min = 0x60,
+		.max = 0x6f,
+	},
 };
 
 static const struct max310x_devtype max3109_devtype = {
@@ -435,6 +453,10 @@ static const struct max310x_devtype max3109_devtype = {
 	.mode1	= MAX310X_MODE1_AUTOSLEEP_BIT,
 	.detect	= max3109_detect,
 	.power	= max310x_power,
+	.slave_addr	= {
+		.min = 0x60,
+		.max = 0x6f,
+	},
 };
 
 static const struct max310x_devtype max14830_devtype = {
@@ -443,11 +465,15 @@ static const struct max310x_devtype max14830_devtype = {
 	.mode1	= MAX310X_MODE1_IRQSEL_BIT,
 	.detect	= max14830_detect,
 	.power	= max14830_power,
+	.slave_addr	= {
+		.min = 0x60,
+		.max = 0x6f,
+	},
 };
 
 static bool max310x_reg_writeable(struct device *dev, unsigned int reg)
 {
-	switch (reg & 0x1f) {
+	switch (reg) {
 	case MAX310X_IRQSTS_REG:
 	case MAX310X_LSR_IRQSTS_REG:
 	case MAX310X_SPCHR_IRQSTS_REG:
@@ -464,7 +490,7 @@ static bool max310x_reg_writeable(struct device *dev, unsigned int reg)
 
 static bool max310x_reg_volatile(struct device *dev, unsigned int reg)
 {
-	switch (reg & 0x1f) {
+	switch (reg) {
 	case MAX310X_RHR_REG:
 	case MAX310X_IRQSTS_REG:
 	case MAX310X_LSR_IRQSTS_REG:
@@ -486,7 +512,7 @@ static bool max310x_reg_volatile(struct device *dev, unsigned int reg)
 
 static bool max310x_reg_precious(struct device *dev, unsigned int reg)
 {
-	switch (reg & 0x1f) {
+	switch (reg) {
 	case MAX310X_RHR_REG:
 	case MAX310X_IRQSTS_REG:
 	case MAX310X_SPCHR_IRQSTS_REG:
@@ -624,31 +650,15 @@ static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
 static void max310x_batch_write(struct uart_port *port, u8 *txbuf, unsigned int len)
 {
 	struct max310x_one *one = to_max310x_port(port);
-	struct spi_transfer xfer[] = {
-		{
-			.tx_buf = &one->wr_header,
-			.len = sizeof(one->wr_header),
-		}, {
-			.tx_buf = txbuf,
-			.len = len,
-		}
-	};
-	spi_sync_transfer(to_spi_device(port->dev), xfer, ARRAY_SIZE(xfer));
+
+	regmap_raw_write(one->regmap, MAX310X_THR_REG, txbuf, len);
 }
 
 static void max310x_batch_read(struct uart_port *port, u8 *rxbuf, unsigned int len)
 {
 	struct max310x_one *one = to_max310x_port(port);
-	struct spi_transfer xfer[] = {
-		{
-			.tx_buf = &one->rd_header,
-			.len = sizeof(one->rd_header),
-		}, {
-			.rx_buf = rxbuf,
-			.len = len,
-		}
-	};
-	spi_sync_transfer(to_spi_device(port->dev), xfer, ARRAY_SIZE(xfer));
+
+	regmap_raw_read(one->regmap, MAX310X_RHR_REG, rxbuf, len);
 }
 
 static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen)
@@ -1026,7 +1036,7 @@ static void max310x_rs_proc(struct work_struct *ws)
 			MAX310X_MODE2_ECHOSUPR_BIT, mode2);
 }
 
-static int max310x_rs485_config(struct uart_port *port,
+static int max310x_rs485_config(struct uart_port *port, struct ktermios *termios,
 				struct serial_rs485 *rs485)
 {
 	struct max310x_one *one = to_max310x_port(port);
@@ -1035,8 +1045,6 @@ static int max310x_rs485_config(struct uart_port *port,
 	    (rs485->delay_rts_after_send > 0x0f))
 		return -ERANGE;
 
-	rs485->flags &= SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX |
-			SER_RS485_ENABLED;
 	port->rs485 = *rs485;
 
 	schedule_work(&one->rs_work);
@@ -1249,16 +1257,24 @@ static int max310x_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 }
 #endif
 
+static const struct serial_rs485 max310x_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX,
+	.delay_rts_before_send = 1,
+	.delay_rts_after_send = 1,
+};
+
 static int max310x_probe(struct device *dev, const struct max310x_devtype *devtype,
-			 struct regmap *regmap, int irq)
+			 const struct max310x_if_cfg *if_cfg,
+			 struct regmap *regmaps[], int irq)
 {
 	int i, ret, fmin, fmax, freq;
 	struct max310x_port *s;
 	u32 uartclk = 0;
 	bool xtal;
 
-	if (IS_ERR(regmap))
-		return PTR_ERR(regmap);
+	for (i = 0; i < devtype->nr; i++)
+		if (IS_ERR(regmaps[i]))
+			return PTR_ERR(regmaps[i]);
 
 	/* Alloc port structure */
 	s = devm_kzalloc(dev, struct_size(s, p, devtype->nr), GFP_KERNEL);
@@ -1305,8 +1321,9 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 		goto out_clk;
 	}
 
-	s->regmap = regmap;
+	s->regmap = regmaps[0];
 	s->devtype = devtype;
+	s->if_cfg = if_cfg;
 	dev_set_drvdata(dev, s);
 
 	/* Check device to ensure we are talking to what we expect */
@@ -1315,22 +1332,18 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 		goto out_clk;
 
 	for (i = 0; i < devtype->nr; i++) {
-		unsigned int offs = i << 5;
-
 		/* Reset port */
-		regmap_write(s->regmap, MAX310X_MODE2_REG + offs,
+		regmap_write(regmaps[i], MAX310X_MODE2_REG,
 			     MAX310X_MODE2_RST_BIT);
 		/* Clear port reset */
-		regmap_write(s->regmap, MAX310X_MODE2_REG + offs, 0);
+		regmap_write(regmaps[i], MAX310X_MODE2_REG, 0);
 
 		/* Wait for port startup */
 		do {
-			regmap_read(s->regmap,
-				    MAX310X_BRGDIVLSB_REG + offs, &ret);
+			regmap_read(regmaps[i], MAX310X_BRGDIVLSB_REG, &ret);
 		} while (ret != 0x01);
 
-		regmap_write(s->regmap, MAX310X_MODE1_REG + offs,
-			     devtype->mode1);
+		regmap_write(regmaps[i], MAX310X_MODE1_REG, devtype->mode1);
 	}
 
 	uartclk = max310x_set_ref_clk(dev, s, freq, xtal);
@@ -1353,11 +1366,14 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 		s->p[i].port.fifosize	= MAX310X_FIFO_SIZE;
 		s->p[i].port.flags	= UPF_FIXED_TYPE | UPF_LOW_LATENCY;
 		s->p[i].port.iotype	= UPIO_PORT;
-		s->p[i].port.iobase	= i * 0x20;
+		s->p[i].port.iobase	= i;
 		s->p[i].port.membase	= (void __iomem *)~0;
 		s->p[i].port.uartclk	= uartclk;
 		s->p[i].port.rs485_config = max310x_rs485_config;
+		s->p[i].port.rs485_supported = max310x_rs485_supported;
 		s->p[i].port.ops	= &max310x_ops;
+		s->p[i].regmap		= regmaps[i];
+
 		/* Disable all interrupts */
 		max310x_port_write(&s->p[i].port, MAX310X_IRQEN_REG, 0);
 		/* Clear IRQ status register */
@@ -1368,10 +1384,6 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 		INIT_WORK(&s->p[i].md_work, max310x_md_proc);
 		/* Initialize queue for changing RS485 mode */
 		INIT_WORK(&s->p[i].rs_work, max310x_rs_proc);
-		/* Initialize SPI-transfer buffers */
-		s->p[i].wr_header = (s->p[i].port.iobase + MAX310X_THR_REG) |
-				    MAX310X_WRITE_BIT;
-		s->p[i].rd_header = (s->p[i].port.iobase + MAX310X_RHR_REG);
 
 		/* Register port */
 		ret = uart_add_one_port(&max310x_uart, &s->p[i].port);
@@ -1456,16 +1468,31 @@ static struct regmap_config regcfg = {
 	.val_bits = 8,
 	.write_flag_mask = MAX310X_WRITE_BIT,
 	.cache_type = REGCACHE_RBTREE,
+	.max_register = MAX310X_REG_1F,
 	.writeable_reg = max310x_reg_writeable,
 	.volatile_reg = max310x_reg_volatile,
 	.precious_reg = max310x_reg_precious,
 };
 
 #ifdef CONFIG_SPI_MASTER
+static int max310x_spi_extended_reg_enable(struct device *dev, bool enable)
+{
+	struct max310x_port *s = dev_get_drvdata(dev);
+
+	return regmap_write(s->regmap, MAX310X_GLOBALCMD_REG,
+			    enable ? MAX310X_EXTREG_ENBL : MAX310X_EXTREG_DSBL);
+}
+
+static const struct max310x_if_cfg __maybe_unused max310x_spi_if_cfg = {
+	.extended_reg_enable = max310x_spi_extended_reg_enable,
+	.rev_id_reg = MAX310X_SPI_REVID_EXTREG,
+};
+
 static int max310x_spi_probe(struct spi_device *spi)
 {
 	const struct max310x_devtype *devtype;
-	struct regmap *regmap;
+	struct regmap *regmaps[4];
+	unsigned int i;
 	int ret;
 
 	/* Setup SPI bus */
@@ -1480,10 +1507,14 @@ static int max310x_spi_probe(struct spi_device *spi)
 	if (!devtype)
 		devtype = (struct max310x_devtype *)spi_get_device_id(spi)->driver_data;
 
-	regcfg.max_register = devtype->nr * 0x20 - 1;
-	regmap = devm_regmap_init_spi(spi, &regcfg);
+	for (i = 0; i < devtype->nr; i++) {
+		u8 port_mask = i * 0x20;
+		regcfg.read_flag_mask = port_mask;
+		regcfg.write_flag_mask = port_mask | MAX310X_WRITE_BIT;
+		regmaps[i] = devm_regmap_init_spi(spi, &regcfg);
+	}
 
-	return max310x_probe(&spi->dev, devtype, regmap, spi->irq);
+	return max310x_probe(&spi->dev, devtype, &max310x_spi_if_cfg, regmaps, spi->irq);
 }
 
 static void max310x_spi_remove(struct spi_device *spi)
@@ -1512,6 +1543,97 @@ static struct spi_driver max310x_spi_driver = {
 };
 #endif
 
+#ifdef CONFIG_I2C
+static int max310x_i2c_extended_reg_enable(struct device *dev, bool enable)
+{
+	return 0;
+}
+
+static struct regmap_config regcfg_i2c = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.writeable_reg = max310x_reg_writeable,
+	.volatile_reg = max310x_reg_volatile,
+	.precious_reg = max310x_reg_precious,
+	.max_register = MAX310X_I2C_REVID_EXTREG,
+};
+
+static const struct max310x_if_cfg max310x_i2c_if_cfg = {
+	.extended_reg_enable = max310x_i2c_extended_reg_enable,
+	.rev_id_reg = MAX310X_I2C_REVID_EXTREG,
+};
+
+static unsigned short max310x_i2c_slave_addr(unsigned short addr,
+					     unsigned int nr)
+{
+	/*
+	 * For MAX14830 and MAX3109, the slave address depends on what the
+	 * A0 and A1 pins are tied to.
+	 * See Table I2C Address Map of the datasheet.
+	 * Based on that table, the following formulas were determined.
+	 * UART1 - UART0 = 0x10
+	 * UART2 - UART1 = 0x20 + 0x10
+	 * UART3 - UART2 = 0x10
+	 */
+
+	addr -= nr * 0x10;
+
+	if (nr >= 2)
+		addr -= 0x20;
+
+	return addr;
+}
+
+static int max310x_i2c_probe(struct i2c_client *client)
+{
+	const struct max310x_devtype *devtype =
+			device_get_match_data(&client->dev);
+	struct i2c_client *port_client;
+	struct regmap *regmaps[4];
+	unsigned int i;
+	u8 port_addr;
+
+	if (client->addr < devtype->slave_addr.min ||
+		client->addr > devtype->slave_addr.max)
+		return dev_err_probe(&client->dev, -EINVAL,
+				     "Slave addr 0x%x outside of range [0x%x, 0x%x]\n",
+				     client->addr, devtype->slave_addr.min,
+				     devtype->slave_addr.max);
+
+	regmaps[0] = devm_regmap_init_i2c(client, &regcfg_i2c);
+
+	for (i = 1; i < devtype->nr; i++) {
+		port_addr = max310x_i2c_slave_addr(client->addr, i);
+		port_client = devm_i2c_new_dummy_device(&client->dev,
+							client->adapter,
+							port_addr);
+
+		regmaps[i] = devm_regmap_init_i2c(port_client, &regcfg_i2c);
+	}
+
+	return max310x_probe(&client->dev, devtype, &max310x_i2c_if_cfg,
+			     regmaps, client->irq);
+}
+
+static int max310x_i2c_remove(struct i2c_client *client)
+{
+	max310x_remove(&client->dev);
+
+	return 0;
+}
+
+static struct i2c_driver max310x_i2c_driver = {
+	.driver = {
+		.name		= MAX310X_NAME,
+		.of_match_table	= max310x_dt_ids,
+		.pm		= &max310x_pm_ops,
+	},
+	.probe_new	= max310x_i2c_probe,
+	.remove		= max310x_i2c_remove,
+};
+#endif
+
 static int __init max310x_uart_init(void)
 {
 	int ret;
@@ -1525,15 +1647,35 @@ static int __init max310x_uart_init(void)
 #ifdef CONFIG_SPI_MASTER
 	ret = spi_register_driver(&max310x_spi_driver);
 	if (ret)
-		uart_unregister_driver(&max310x_uart);
+		goto err_spi_register;
+#endif
+
+#ifdef CONFIG_I2C
+	ret = i2c_add_driver(&max310x_i2c_driver);
+	if (ret)
+		goto err_i2c_register;
+#endif
+
+	return 0;
+
+#ifdef CONFIG_I2C
+err_i2c_register:
+	spi_unregister_driver(&max310x_spi_driver);
 #endif
 
+err_spi_register:
+	uart_unregister_driver(&max310x_uart);
+
 	return ret;
 }
 module_init(max310x_uart_init);
 
 static void __exit max310x_uart_exit(void)
 {
+#ifdef CONFIG_I2C
+	i2c_del_driver(&max310x_i2c_driver);
+#endif
+
 #ifdef CONFIG_SPI_MASTER
 	spi_unregister_driver(&max310x_spi_driver);
 #endif