diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2022-11-21 12:21:53 +0300 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2022-11-21 12:21:53 +0300 |
commit | 05df6ab8eba625a1d97eb67ee06d786b8e460685 (patch) | |
tree | 7fed59b7f49fd8d816475ca6b20c95c7f837ca6f /drivers/tty/serial | |
parent | 1d926e259d8f8195fdfaeea7951149001894b473 (diff) | |
parent | eb7081409f94a9a8608593d0fb63a1aa3d6f95d8 (diff) | |
download | linux-05df6ab8eba625a1d97eb67ee06d786b8e460685.tar.xz |
Merge 6.1-rc6 into driver-core-next
We need the kernfs changes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r-- | drivers/tty/serial/8250/8250_lpss.c | 17 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 52 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_parisc.c (renamed from drivers/tty/serial/8250/8250_gsc.c) | 0 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 7 | ||||
-rw-r--r-- | drivers/tty/serial/8250/Kconfig | 4 | ||||
-rw-r--r-- | drivers/tty/serial/8250/Makefile | 2 | ||||
-rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 76 | ||||
-rw-r--r-- | drivers/tty/serial/imx.c | 1 |
8 files changed, 101 insertions, 58 deletions
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c index 44cc755b1a29..0e43bdfb7459 100644 --- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -174,6 +174,8 @@ static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port) */ up->dma = dma; + lpss->dma_maxburst = 16; + port->set_termios = dw8250_do_set_termios; return 0; @@ -277,8 +279,13 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port struct dw_dma_slave *rx_param, *tx_param; struct device *dev = port->port.dev; - if (!lpss->dma_param.dma_dev) + if (!lpss->dma_param.dma_dev) { + dma = port->dma; + if (dma) + goto out_configuration_only; + return 0; + } rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); if (!rx_param) @@ -289,16 +296,18 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port return -ENOMEM; *rx_param = lpss->dma_param; - dma->rxconf.src_maxburst = lpss->dma_maxburst; - *tx_param = lpss->dma_param; - dma->txconf.dst_maxburst = lpss->dma_maxburst; dma->fn = lpss8250_dma_filter; dma->rx_param = rx_param; dma->tx_param = tx_param; port->dma = dma; + +out_configuration_only: + dma->rxconf.src_maxburst = lpss->dma_maxburst; + dma->txconf.dst_maxburst = lpss->dma_maxburst; + return 0; } diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 41b8c6b27136..3f33014022f0 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -157,7 +157,11 @@ static u32 uart_read(struct uart_8250_port *up, u32 reg) return readl(up->port.membase + (reg << up->port.regshift)); } -static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +/* + * Called on runtime PM resume path from omap8250_restore_regs(), and + * omap8250_set_mctrl(). + */ +static void __omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct uart_8250_port *up = up_to_u8250p(port); struct omap8250_priv *priv = up->port.private_data; @@ -181,6 +185,20 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) } } +static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + int err; + + err = pm_runtime_resume_and_get(port->dev); + if (err) + return; + + __omap8250_set_mctrl(port, mctrl); + + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); +} + /* * Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460) * The access to uart register after MDR1 Access @@ -193,27 +211,10 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) static void omap_8250_mdr1_errataset(struct uart_8250_port *up, struct omap8250_priv *priv) { - u8 timeout = 255; - serial_out(up, UART_OMAP_MDR1, priv->mdr1); udelay(2); serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR); - /* - * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and - * TX_FIFO_E bit is 1. - */ - while (UART_LSR_THRE != (serial_in(up, UART_LSR) & - (UART_LSR_THRE | UART_LSR_DR))) { - timeout--; - if (!timeout) { - /* Should *never* happen. we warn and carry on */ - dev_crit(up->port.dev, "Errata i202: timedout %x\n", - serial_in(up, UART_LSR)); - break; - } - udelay(1); - } } static void omap_8250_get_divisor(struct uart_port *port, unsigned int baud, @@ -292,6 +293,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) { struct omap8250_priv *priv = up->port.private_data; struct uart_8250_dma *dma = up->dma; + u8 mcr = serial8250_in_MCR(up); if (dma && dma->tx_running) { /* @@ -308,7 +310,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_EFR, UART_EFR_ECB); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial8250_out_MCR(up, UART_MCR_TCRTLR); + serial8250_out_MCR(up, mcr | UART_MCR_TCRTLR); serial_out(up, UART_FCR, up->fcr); omap8250_update_scr(up, priv); @@ -324,7 +326,8 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_LCR, 0); /* drop TCR + TLR access, we setup XON/XOFF later */ - serial8250_out_MCR(up, up->mcr); + serial8250_out_MCR(up, mcr); + serial_out(up, UART_IER, up->ier); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); @@ -341,7 +344,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) omap8250_update_mdr1(up, priv); - up->port.ops->set_mctrl(&up->port, up->port.mctrl); + __omap8250_set_mctrl(&up->port, up->port.mctrl); if (up->port.rs485.flags & SER_RS485_ENABLED) serial8250_em485_stop_tx(up); @@ -669,7 +672,6 @@ static int omap_8250_startup(struct uart_port *port) pm_runtime_get_sync(port->dev); - up->mcr = 0; serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); serial_out(up, UART_LCR, UART_LCR_WLEN8); @@ -1458,9 +1460,15 @@ err: static int omap8250_remove(struct platform_device *pdev) { struct omap8250_priv *priv = platform_get_drvdata(pdev); + int err; + + err = pm_runtime_resume_and_get(&pdev->dev); + if (err) + return err; pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); + flush_work(&priv->qos_work); pm_runtime_disable(&pdev->dev); serial8250_unregister_port(priv->line); cpu_latency_qos_remove_request(&priv->pm_qos_request); diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_parisc.c index 948d0a1c6ae8..948d0a1c6ae8 100644 --- a/drivers/tty/serial/8250/8250_gsc.c +++ b/drivers/tty/serial/8250/8250_parisc.c diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index fe8662cd9402..388172289627 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1897,10 +1897,13 @@ EXPORT_SYMBOL_GPL(serial8250_modem_status); static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir) { switch (iir & 0x3f) { - case UART_IIR_RX_TIMEOUT: - serial8250_rx_dma_flush(up); + case UART_IIR_RDI: + if (!up->dma->rx_running) + break; fallthrough; case UART_IIR_RLSI: + case UART_IIR_RX_TIMEOUT: + serial8250_rx_dma_flush(up); return true; } return up->dma->rx_dma(up); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index d0b49e15fbf5..b0f62345bc84 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -116,9 +116,9 @@ config SERIAL_8250_CONSOLE If unsure, say N. -config SERIAL_8250_GSC +config SERIAL_8250_PARISC tristate - depends on SERIAL_8250 && GSC + depends on SERIAL_8250 && PARISC default SERIAL_8250 config SERIAL_8250_DMA diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index bee908f99ea0..1615bfdde2a0 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o 8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o 8250_base-$(CONFIG_SERIAL_8250_DWLIB) += 8250_dwlib.o 8250_base-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o -obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o +obj-$(CONFIG_SERIAL_8250_PARISC) += 8250_parisc.o obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o obj-$(CONFIG_SERIAL_8250_EXAR) += 8250_exar.o obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 67fa113f77d4..888e01fbd9c5 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -12,6 +12,7 @@ #include <linux/dmaengine.h> #include <linux/dmapool.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/irq.h> #include <linux/module.h> #include <linux/of.h> @@ -404,33 +405,6 @@ static unsigned int lpuart_get_baud_clk_rate(struct lpuart_port *sport) #define lpuart_enable_clks(x) __lpuart_enable_clks(x, true) #define lpuart_disable_clks(x) __lpuart_enable_clks(x, false) -static int lpuart_global_reset(struct lpuart_port *sport) -{ - struct uart_port *port = &sport->port; - void __iomem *global_addr; - int ret; - - if (uart_console(port)) - return 0; - - ret = clk_prepare_enable(sport->ipg_clk); - if (ret) { - dev_err(sport->port.dev, "failed to enable uart ipg clk: %d\n", ret); - return ret; - } - - if (is_imx7ulp_lpuart(sport) || is_imx8qxp_lpuart(sport)) { - global_addr = port->membase + UART_GLOBAL - IMX_REG_OFF; - writel(UART_GLOBAL_RST, global_addr); - usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US); - writel(0, global_addr); - usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US); - } - - clk_disable_unprepare(sport->ipg_clk); - return 0; -} - static void lpuart_stop_tx(struct uart_port *port) { unsigned char temp; @@ -2636,6 +2610,54 @@ static const struct serial_rs485 lpuart_rs485_supported = { /* delay_rts_* and RX_DURING_TX are not supported */ }; +static int lpuart_global_reset(struct lpuart_port *sport) +{ + struct uart_port *port = &sport->port; + void __iomem *global_addr; + unsigned long ctrl, bd; + unsigned int val = 0; + int ret; + + ret = clk_prepare_enable(sport->ipg_clk); + if (ret) { + dev_err(sport->port.dev, "failed to enable uart ipg clk: %d\n", ret); + return ret; + } + + if (is_imx7ulp_lpuart(sport) || is_imx8qxp_lpuart(sport)) { + /* + * If the transmitter is used by earlycon, wait for transmit engine to + * complete and then reset. + */ + ctrl = lpuart32_read(port, UARTCTRL); + if (ctrl & UARTCTRL_TE) { + bd = lpuart32_read(&sport->port, UARTBAUD); + if (read_poll_timeout(lpuart32_tx_empty, val, val, 1, 100000, false, + port)) { + dev_warn(sport->port.dev, + "timeout waiting for transmit engine to complete\n"); + clk_disable_unprepare(sport->ipg_clk); + return 0; + } + } + + global_addr = port->membase + UART_GLOBAL - IMX_REG_OFF; + writel(UART_GLOBAL_RST, global_addr); + usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US); + writel(0, global_addr); + usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US); + + /* Recover the transmitter for earlycon. */ + if (ctrl & UARTCTRL_TE) { + lpuart32_write(port, bd, UARTBAUD); + lpuart32_write(port, ctrl, UARTCTRL); + } + } + + clk_disable_unprepare(sport->ipg_clk); + return 0; +} + static int lpuart_probe(struct platform_device *pdev) { const struct lpuart_soc_data *sdata = of_device_get_match_data(&pdev->dev); diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 05b432dc7a85..aadda66405b4 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2594,6 +2594,7 @@ static const struct dev_pm_ops imx_uart_pm_ops = { .suspend_noirq = imx_uart_suspend_noirq, .resume_noirq = imx_uart_resume_noirq, .freeze_noirq = imx_uart_suspend_noirq, + .thaw_noirq = imx_uart_resume_noirq, .restore_noirq = imx_uart_resume_noirq, .suspend = imx_uart_suspend, .resume = imx_uart_resume, |