diff options
| author | Vardan Mikayelyan <mvardan@synopsys.com> | 2018-02-16 11:56:03 +0300 |
|---|---|---|
| committer | Felipe Balbi <felipe.balbi@linux.intel.com> | 2018-03-13 11:47:58 +0300 |
| commit | 13b1f8e25bfd1d6b96278421f934efdd35be9d5b (patch) | |
| tree | 886e4590666e6907fa9ec2280274c2917d0c5a91 /drivers/usb/dwc2/platform.c | |
| parent | 03ea6d6e9e1ff1b0222eb723eee5990d3511cc4d (diff) | |
| download | linux-13b1f8e25bfd1d6b96278421f934efdd35be9d5b.tar.xz | |
usb: dwc2: Force mode optimizations
If the dr_mode is USB_DR_MODE_OTG, forcing the mode is needed during
driver probe to get the host and device specific HW parameters. Then we
clear the force mode bits so that the core operates in OTG mode.
The force mode bits should not be touched at any other time during the
driver lifetime and they should be preserved whenever the GUSBCFG
register is written to. The force mode bit values will persist across
soft resets of the core.
If the dr_mode is either USB_DR_MODE_HOST or USB_DR_MODE_PERIPHERAL, the
force mode is set just once at probe to configure the core as either a
host or peripheral.
Given the above, we no longer need any other reset delays, force delays,
or any forced modes anywhere else in the driver. So replace all calls to
dwc2_core_reset_and_force_dr_mode() with dwc2_core_reset() and remove
all other unnecessary delays.
Also remove the dwc2_force_mode_if_needed() function since the "if
needed" part is already taken care of by the polling in
dwc2_force_mode().
Finally, remove all other calls to dwc2_clear_force_mode().
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com>
Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Diffstat (limited to 'drivers/usb/dwc2/platform.c')
| -rw-r--r-- | drivers/usb/dwc2/platform.c | 9 |
1 files changed, 8 insertions, 1 deletions
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 7d80e6360a5a..4c0819554bcd 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -427,13 +427,20 @@ static int dwc2_driver_probe(struct platform_device *dev) * Reset before dwc2_get_hwparams() then it could get power-on real * reset value form registers. */ - dwc2_core_reset_and_force_dr_mode(hsotg); + retval = dwc2_core_reset(hsotg, false); + if (retval) + goto error; /* Detect config values from hardware */ retval = dwc2_get_hwparams(hsotg); if (retval) goto error; + /* + * For OTG cores, set the force mode bits to reflect the value + * of dr_mode. Force mode bits should not be touched at any + * other time after this. + */ dwc2_force_dr_mode(hsotg); retval = dwc2_init_params(hsotg); |