summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
authorDuncan Sands <duncan.sands@math.u-psud.fr>2005-05-11 22:20:40 +0400
committerGreg Kroah-Hartman <gregkh@suse.de>2005-06-28 01:43:56 +0400
commit48da7267ff1631b0bff1eab15db86adace11ea91 (patch)
tree6ca7223ea15afeb4b0784b1a36a55516c7d14923 /drivers/usb
parent9574507c98087951866ef30c8bf876e23ca4b99e (diff)
downloadlinux-48da7267ff1631b0bff1eab15db86adace11ea91.tar.xz
[PATCH] USB ATM: port speedtch to new usbatm core
Port the speedtch driver to the new usbatm core. The code is much the same as before, just reorganized, though I threw in some minor improvements (a new module parameter for choosing the altsetting, more robust urb failure handling, ...) while I was there. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/atm/speedtch.c1085
1 files changed, 533 insertions, 552 deletions
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 233f9229badb..6a6eaa2a3b1c 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -5,6 +5,8 @@
* Copyright (C) 2003, Duncan Sands
* Copyright (C) 2004, David Woodhouse
*
+ * Based on "modem_run.c", copyright (C) 2001, Benoit Papillault
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
@@ -21,819 +23,798 @@
*
******************************************************************************/
-#include <linux/module.h>
-#include <linux/moduleparam.h>
+#include <asm/page.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/firmware.h>
#include <linux/gfp.h>
+#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/errno.h>
-#include <linux/proc_fs.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/slab.h>
-#include <linux/wait.h>
-#include <linux/list.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <linux/smp_lock.h>
-#include <linux/interrupt.h>
-#include <linux/atm.h>
-#include <linux/atmdev.h>
-#include <linux/crc32.h>
-#include <linux/init.h>
-#include <linux/firmware.h>
-
-#include "usb_atm.h"
+#include <linux/stat.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
-#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
-# define USE_FW_LOADER
-#endif
+#include "usbatm.h"
#define DRIVER_AUTHOR "Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
-#define DRIVER_VERSION "1.8"
+#define DRIVER_VERSION "1.9"
#define DRIVER_DESC "Alcatel SpeedTouch USB driver version " DRIVER_VERSION
static const char speedtch_driver_name[] = "speedtch";
-#define SPEEDTOUCH_VENDORID 0x06b9
-#define SPEEDTOUCH_PRODUCTID 0x4061
+#define CTRL_TIMEOUT 2000 /* milliseconds */
+#define DATA_TIMEOUT 2000 /* milliseconds */
-/* Timeout in jiffies */
-#define CTRL_TIMEOUT 2000
-#define DATA_TIMEOUT 2000
+#define OFFSET_7 0 /* size 1 */
+#define OFFSET_b 1 /* size 8 */
+#define OFFSET_d 9 /* size 4 */
+#define OFFSET_e 13 /* size 1 */
+#define OFFSET_f 14 /* size 1 */
+#define TOTAL 15
-#define OFFSET_7 0 /* size 1 */
-#define OFFSET_b 1 /* size 8 */
-#define OFFSET_d 9 /* size 4 */
-#define OFFSET_e 13 /* size 1 */
-#define OFFSET_f 14 /* size 1 */
-#define TOTAL 15
+#define SIZE_7 1
+#define SIZE_b 8
+#define SIZE_d 4
+#define SIZE_e 1
+#define SIZE_f 1
-#define SIZE_7 1
-#define SIZE_b 8
-#define SIZE_d 4
-#define SIZE_e 1
-#define SIZE_f 1
+#define MIN_POLL_DELAY 5000 /* milliseconds */
+#define MAX_POLL_DELAY 60000 /* milliseconds */
-static int dl_512_first = 0;
-static int sw_buffering = 0;
+#define RESUBMIT_DELAY 1000 /* milliseconds */
-module_param(dl_512_first, bool, 0444);
-MODULE_PARM_DESC(dl_512_first, "Read 512 bytes before sending firmware");
+#define DEFAULT_ALTSETTING 1
+#define DEFAULT_DL_512_FIRST 0
+#define DEFAULT_SW_BUFFERING 0
-module_param(sw_buffering, uint, 0444);
-MODULE_PARM_DESC(sw_buffering, "Enable software buffering");
+static int altsetting = DEFAULT_ALTSETTING;
+static int dl_512_first = DEFAULT_DL_512_FIRST;
+static int sw_buffering = DEFAULT_SW_BUFFERING;
-#define UDSL_IOCTL_LINE_UP 1
-#define UDSL_IOCTL_LINE_DOWN 2
+module_param(altsetting, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(altsetting,
+ "Alternative setting for data interface (default: "
+ __MODULE_STRING(DEFAULT_ALTSETTING) ")");
-#define SPEEDTCH_ENDPOINT_INT 0x81
-#define SPEEDTCH_ENDPOINT_DATA 0x07
-#define SPEEDTCH_ENDPOINT_FIRMWARE 0x05
+module_param(dl_512_first, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dl_512_first,
+ "Read 512 bytes before sending firmware (default: "
+ __MODULE_STRING(DEFAULT_DL_512_FIRST) ")");
-#define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) )
+module_param(sw_buffering, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(sw_buffering,
+ "Enable software buffering (default: "
+ __MODULE_STRING(DEFAULT_SW_BUFFERING) ")");
-static struct usb_device_id speedtch_usb_ids[] = {
- {USB_DEVICE(SPEEDTOUCH_VENDORID, SPEEDTOUCH_PRODUCTID)},
- {}
-};
+#define ENDPOINT_INT 0x81
+#define ENDPOINT_DATA 0x07
+#define ENDPOINT_FIRMWARE 0x05
-MODULE_DEVICE_TABLE(usb, speedtch_usb_ids);
+#define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) )
struct speedtch_instance_data {
- struct udsl_instance_data u;
+ struct usbatm_data *usbatm;
+
+ struct work_struct status_checker;
- /* Status */
+ int poll_delay; /* milliseconds */
+
+ struct timer_list resubmit_timer;
struct urb *int_urb;
unsigned char int_data[16];
- struct work_struct poll_work;
- struct timer_list poll_timer;
-};
-/* USB */
-
-static int speedtch_usb_probe(struct usb_interface *intf,
- const struct usb_device_id *id);
-static void speedtch_usb_disconnect(struct usb_interface *intf);
-static int speedtch_usb_ioctl(struct usb_interface *intf, unsigned int code,
- void *user_data);
-static void speedtch_handle_int(struct urb *urb, struct pt_regs *regs);
-static void speedtch_poll_status(struct speedtch_instance_data *instance);
-static struct usb_driver speedtch_usb_driver = {
- .owner = THIS_MODULE,
- .name = speedtch_driver_name,
- .probe = speedtch_usb_probe,
- .disconnect = speedtch_usb_disconnect,
- .ioctl = speedtch_usb_ioctl,
- .id_table = speedtch_usb_ids,
+ unsigned char scratch_buffer[TOTAL];
};
/***************
** firmware **
***************/
-static void speedtch_got_firmware(struct speedtch_instance_data *instance,
- int got_it)
+static void speedtch_set_swbuff(struct speedtch_instance_data *instance, int state)
{
- int err;
- struct usb_interface *intf;
-
- down(&instance->u.serialize); /* vs self, speedtch_firmware_start */
- if (instance->u.status == UDSL_LOADED_FIRMWARE)
- goto out;
- if (!got_it) {
- instance->u.status = UDSL_NO_FIRMWARE;
- goto out;
- }
- if ((err = usb_set_interface(instance->u.usb_dev, 1, 1)) < 0) {
- dbg("speedtch_got_firmware: usb_set_interface returned %d!", err);
- instance->u.status = UDSL_NO_FIRMWARE;
- goto out;
- }
-
- /* Set up interrupt endpoint */
- intf = usb_ifnum_to_if(instance->u.usb_dev, 0);
- if (intf && !usb_driver_claim_interface(&speedtch_usb_driver, intf, NULL)) {
-
- instance->int_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (instance->int_urb) {
-
- usb_fill_int_urb(instance->int_urb, instance->u.usb_dev,
- usb_rcvintpipe(instance->u.usb_dev, SPEEDTCH_ENDPOINT_INT),
- instance->int_data,
- sizeof(instance->int_data),
- speedtch_handle_int, instance, 50);
- err = usb_submit_urb(instance->int_urb, GFP_KERNEL);
- if (err) {
- /* Doesn't matter; we'll poll anyway */
- dbg("speedtch_got_firmware: Submission of interrupt URB failed %d", err);
- usb_free_urb(instance->int_urb);
- instance->int_urb = NULL;
- usb_driver_release_interface(&speedtch_usb_driver, intf);
- }
- }
- }
- /* Start status polling */
- mod_timer(&instance->poll_timer, jiffies + (1 * HZ));
-
- instance->u.status = UDSL_LOADED_FIRMWARE;
- tasklet_schedule(&instance->u.receive_tasklet);
- out:
- up(&instance->u.serialize);
- wake_up_interruptible(&instance->u.firmware_waiters);
-}
-
-static int speedtch_set_swbuff(struct speedtch_instance_data *instance,
- int state)
-{
- struct usb_device *dev = instance->u.usb_dev;
+ struct usbatm_data *usbatm = instance->usbatm;
+ struct usb_device *usb_dev = usbatm->usb_dev;
int ret;
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x32, 0x40, state ? 0x01 : 0x00,
- 0x00, NULL, 0, 100);
- if (ret < 0) {
- printk("Warning: %sabling SW buffering: usb_control_msg returned %d\n",
- state ? "En" : "Dis", ret);
- return ret;
- }
-
- dbg("speedtch_set_swbuff: %sbled SW buffering", state ? "En" : "Dis");
- return 0;
+ ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+ 0x32, 0x40, state ? 0x01 : 0x00, 0x00, NULL, 0, CTRL_TIMEOUT);
+ if (ret < 0)
+ usb_warn(usbatm,
+ "%sabling SW buffering: usb_control_msg returned %d\n",
+ state ? "En" : "Dis", ret);
+ else
+ dbg("speedtch_set_swbuff: %sbled SW buffering", state ? "En" : "Dis");
}
static void speedtch_test_sequence(struct speedtch_instance_data *instance)
{
- struct usb_device *dev = instance->u.usb_dev;
- unsigned char buf[10];
+ struct usbatm_data *usbatm = instance->usbatm;
+ struct usb_device *usb_dev = usbatm->usb_dev;
+ unsigned char *buf = instance->scratch_buffer;
int ret;
/* URB 147 */
buf[0] = 0x1c;
buf[1] = 0x50;
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x01, 0x40, 0x0b, 0x00, buf, 2, 100);
+ ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+ 0x01, 0x40, 0x0b, 0x00, buf, 2, CTRL_TIMEOUT);
if (ret < 0)
- printk(KERN_WARNING "%s failed on URB147: %d\n", __func__, ret);
+ usb_warn(usbatm, "%s failed on URB147: %d\n", __func__, ret);
/* URB 148 */
buf[0] = 0x32;
buf[1] = 0x00;
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x01, 0x40, 0x02, 0x00, buf, 2, 100);
+ ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+ 0x01, 0x40, 0x02, 0x00, buf, 2, CTRL_TIMEOUT);
if (ret < 0)
- printk(KERN_WARNING "%s failed on URB148: %d\n", __func__, ret);
+ usb_warn(usbatm, "%s failed on URB148: %d\n", __func__, ret);
/* URB 149 */
buf[0] = 0x01;
buf[1] = 0x00;
buf[2] = 0x01;
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x01, 0x40, 0x03, 0x00, buf, 3, 100);
+ ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+ 0x01, 0x40, 0x03, 0x00, buf, 3, CTRL_TIMEOUT);
if (ret < 0)
- printk(KERN_WARNING "%s failed on URB149: %d\n", __func__, ret);
+ usb_warn(usbatm, "%s failed on URB149: %d\n", __func__, ret);
/* URB 150 */
buf[0] = 0x01;
buf[1] = 0x00;
buf[2] = 0x01;
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x01, 0x40, 0x04, 0x00, buf, 3, 100);
+ ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+ 0x01, 0x40, 0x04, 0x00, buf, 3, CTRL_TIMEOUT);
if (ret < 0)
- printk(KERN_WARNING "%s failed on URB150: %d\n", __func__, ret);
+ usb_warn(usbatm, "%s failed on URB150: %d\n", __func__, ret);
}
-static int speedtch_start_synchro(struct speedtch_instance_data *instance)
+static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
+ const struct firmware *fw1,
+ const struct firmware *fw2)
{
- struct usb_device *dev = instance->u.usb_dev;
- unsigned char buf[2];
- int ret;
+ unsigned char *buffer;
+ struct usbatm_data *usbatm = instance->usbatm;
+ struct usb_interface *intf;
+ struct usb_device *usb_dev = usbatm->usb_dev;
+ int actual_length;
+ int ret = 0;
+ int offset;
+
+ usb_dbg(usbatm, "%s entered\n", __func__);
+
+ if (!(buffer = (unsigned char *)__get_free_page(GFP_KERNEL))) {
+ ret = -ENOMEM;
+ usb_dbg(usbatm, "%s: no memory for buffer!\n", __func__);
+ goto out;
+ }
+
+ if (!(intf = usb_ifnum_to_if(usb_dev, 2))) {
+ ret = -ENODEV;
+ usb_dbg(usbatm, "%s: interface not found!\n", __func__);
+ goto out_free;
+ }
+
+ /* URB 7 */
+ if (dl_512_first) { /* some modems need a read before writing the firmware */
+ ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
+ buffer, 0x200, &actual_length, 2000);
+
+ if (ret < 0 && ret != -ETIMEDOUT)
+ usb_dbg(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
+ else
+ usb_dbg(usbatm, "%s: BLOCK0 downloaded (%d bytes)\n", __func__, ret);
+ }
+
+ /* URB 8 : both leds are static green */
+ for (offset = 0; offset < fw1->size; offset += PAGE_SIZE) {
+ int thislen = min_t(int, PAGE_SIZE, fw1->size - offset);
+ memcpy(buffer, fw1->data + offset, thislen);
+
+ ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
+ buffer, thislen, &actual_length, DATA_TIMEOUT);
+
+ if (ret < 0) {
+ usb_dbg(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
+ goto out_free;
+ }
+ usb_dbg(usbatm, "%s: BLOCK1 uploaded (%zu bytes)\n", __func__, fw1->size);
+ }
+
+ /* USB led blinking green, ADSL led off */
+
+ /* URB 11 */
+ ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
+ buffer, 0x200, &actual_length, DATA_TIMEOUT);
- ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
- 0x12, 0xc0, 0x04, 0x00,
- buf, sizeof(buf), CTRL_TIMEOUT);
if (ret < 0) {
- printk(KERN_WARNING "SpeedTouch: Failed to start ADSL synchronisation: %d\n", ret);
- return ret;
+ usb_dbg(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
+ goto out_free;
}
+ usb_dbg(usbatm, "%s: BLOCK2 downloaded (%d bytes)\n", __func__, actual_length);
- dbg("speedtch_start_synchro: modem prodded. %d Bytes returned: %02x %02x", ret, buf[0], buf[1]);
- return 0;
+ /* URBs 12 to 139 - USB led blinking green, ADSL led off */
+ for (offset = 0; offset < fw2->size; offset += PAGE_SIZE) {
+ int thislen = min_t(int, PAGE_SIZE, fw2->size - offset);
+ memcpy(buffer, fw2->data + offset, thislen);
+
+ ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
+ buffer, thislen, &actual_length, DATA_TIMEOUT);
+
+ if (ret < 0) {
+ usb_dbg(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
+ goto out_free;
+ }
+ }
+ usb_dbg(usbatm, "%s: BLOCK3 uploaded (%zu bytes)\n", __func__, fw2->size);
+
+ /* USB led static green, ADSL led static red */
+
+ /* URB 142 */
+ ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
+ buffer, 0x200, &actual_length, DATA_TIMEOUT);
+
+ if (ret < 0) {
+ usb_dbg(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
+ goto out_free;
+ }
+
+ /* success */
+ usb_dbg(usbatm, "%s: BLOCK4 downloaded (%d bytes)\n", __func__, actual_length);
+
+ /* Delay to allow firmware to start up. We can do this here
+ because we're in our own kernel thread anyway. */
+ msleep_interruptible(1000);
+
+ /* Enable software buffering, if requested */
+ if (sw_buffering)
+ speedtch_set_swbuff(instance, 1);
+
+ /* Magic spell; don't ask us what this does */
+ speedtch_test_sequence(instance);
+
+ ret = 0;
+
+out_free:
+ free_page((unsigned long)buffer);
+out:
+ return ret;
}
-static void speedtch_handle_int(struct urb *urb, struct pt_regs *regs)
+static int speedtch_find_firmware(struct usb_interface *intf, int phase,
+ const struct firmware **fw_p)
{
- struct speedtch_instance_data *instance = urb->context;
- unsigned int count = urb->actual_length;
- int ret;
+ struct device *dev = &intf->dev;
+ const u16 bcdDevice = le16_to_cpu(interface_to_usbdev(intf)->descriptor.bcdDevice);
+ const u8 major_revision = bcdDevice >> 8;
+ const u8 minor_revision = bcdDevice & 0xff;
+ char buf[24];
- /* The magic interrupt for "up state" */
- const static unsigned char up_int[6] = { 0xa1, 0x00, 0x01, 0x00, 0x00, 0x00 };
- /* The magic interrupt for "down state" */
- const static unsigned char down_int[6] = { 0xa1, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision);
+ dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated; clean up */
- dbg("%s - urb shutting down with status: %d", __func__, urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d", __func__, urb->status);
- goto exit;
- }
+ if (request_firmware(fw_p, buf, dev)) {
+ sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision);
+ dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
- if (count < 6) {
- dbg("%s - int packet too short", __func__);
- goto exit;
+ if (request_firmware(fw_p, buf, dev)) {
+ sprintf(buf, "speedtch-%d.bin", phase);
+ dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
+
+ if (request_firmware(fw_p, buf, dev)) {
+ dev_warn(dev, "no stage %d firmware found!\n", phase);
+ return -ENOENT;
+ }
+ }
}
- if (!memcmp(up_int, instance->int_data, 6)) {
- del_timer(&instance->poll_timer);
- printk(KERN_NOTICE "DSL line goes up\n");
- } else if (!memcmp(down_int, instance->int_data, 6)) {
- printk(KERN_NOTICE "DSL line goes down\n");
- } else {
- int i;
+ dev_info(dev, "found stage %d firmware %s\n", phase, buf);
- printk(KERN_DEBUG "Unknown interrupt packet of %d bytes:", count);
- for (i = 0; i < count; i++)
- printk(" %02x", instance->int_data[i]);
- printk("\n");
+ return 0;
+}
+
+static int speedtch_heavy_init(struct usbatm_data *usbatm, struct usb_interface *intf)
+{
+ const struct firmware *fw1, *fw2;
+ struct speedtch_instance_data *instance = usbatm->driver_data;
+ int ret;
+
+ if ((ret = speedtch_find_firmware(intf, 1, &fw1)) < 0)
+ return ret;
+
+ if ((ret = speedtch_find_firmware(intf, 2, &fw2)) < 0) {
+ release_firmware(fw1);
+ return ret;
}
- schedule_work(&instance->poll_work);
- exit:
- rmb();
- if (!instance->int_urb)
- return;
+ ret = speedtch_upload_firmware(instance, fw1, fw2);
+
+ release_firmware(fw2);
+ release_firmware(fw1);
- ret = usb_submit_urb(urb, GFP_ATOMIC);
- if (ret)
- err("%s - usb_submit_urb failed with result %d", __func__, ret);
+ return ret;
}
-static int speedtch_get_status(struct speedtch_instance_data *instance,
- unsigned char *buf)
+
+/**********
+** ATM **
+**********/
+
+static int speedtch_read_status(struct speedtch_instance_data *instance)
{
- struct usb_device *dev = instance->u.usb_dev;
+ struct usbatm_data *usbatm = instance->usbatm;
+ struct usb_device *usb_dev = usbatm->usb_dev;
+ unsigned char *buf = instance->scratch_buffer;
int ret;
memset(buf, 0, TOTAL);
- ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
0x12, 0xc0, 0x07, 0x00, buf + OFFSET_7, SIZE_7,
CTRL_TIMEOUT);
if (ret < 0) {
- dbg("MSG 7 failed");
+ atm_dbg(usbatm, "%s: MSG 7 failed\n", __func__);
return ret;
}
- ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
0x12, 0xc0, 0x0b, 0x00, buf + OFFSET_b, SIZE_b,
CTRL_TIMEOUT);
if (ret < 0) {
- dbg("MSG B failed");
+ atm_dbg(usbatm, "%s: MSG B failed\n", __func__);
return ret;
}
- ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
0x12, 0xc0, 0x0d, 0x00, buf + OFFSET_d, SIZE_d,
CTRL_TIMEOUT);
if (ret < 0) {
- dbg("MSG D failed");
+ atm_dbg(usbatm, "%s: MSG D failed\n", __func__);
return ret;
}
- ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
0x01, 0xc0, 0x0e, 0x00, buf + OFFSET_e, SIZE_e,
CTRL_TIMEOUT);
if (ret < 0) {
- dbg("MSG E failed");
+ atm_dbg(usbatm, "%s: MSG E failed\n", __func__);
return ret;
}
- ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
0x01, 0xc0, 0x0f, 0x00, buf + OFFSET_f, SIZE_f,
CTRL_TIMEOUT);
if (ret < 0) {
- dbg("MSG F failed");
+ atm_dbg(usbatm, "%s: MSG F failed\n", __func__);
return ret;
}
return 0;
}
-static void speedtch_poll_status(struct speedtch_instance_data *instance)
+static int speedtch_start_synchro(struct speedtch_instance_data *instance)
{
- unsigned char buf[TOTAL];
+ struct usbatm_data *usbatm = instance->usbatm;
+ struct usb_device *usb_dev = usbatm->usb_dev;
+ unsigned char *buf = instance->scratch_buffer;
int ret;
- ret = speedtch_get_status(instance, buf);
- if (ret) {
- printk(KERN_WARNING
- "SpeedTouch: Error %d fetching device status\n", ret);
+ atm_dbg(usbatm, "%s entered\n", __func__);
+
+ memset(buf, 0, 2);
+
+ ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+ 0x12, 0xc0, 0x04, 0x00,
+ buf, 2, CTRL_TIMEOUT);
+
+ if (ret < 0)
+ atm_warn(usbatm, "failed to start ADSL synchronisation: %d\n", ret);
+ else
+ atm_dbg(usbatm, "%s: modem prodded. %d bytes returned: %02x %02x\n",
+ __func__, ret, buf[0], buf[1]);
+
+ return ret;
+}
+
+static void speedtch_check_status(struct speedtch_instance_data *instance)
+{
+ struct usbatm_data *usbatm = instance->usbatm;
+ struct atm_dev *atm_dev = usbatm->atm_dev;
+ unsigned char *buf = instance->scratch_buffer;
+ int ret;
+
+ atm_dbg(usbatm, "%s entered\n", __func__);
+
+ ret = speedtch_read_status(instance);
+ if (ret < 0) {
+ atm_warn(usbatm, "error %d fetching device status\n", ret);
+ if (instance->poll_delay < MAX_POLL_DELAY)
+ instance->poll_delay *= 2;
return;
}
- dbg("Line state %02x", buf[OFFSET_7]);
+ if (instance->poll_delay > MIN_POLL_DELAY)
+ instance->poll_delay /= 2;
+
+ atm_dbg(usbatm, "%s: line state %02x\n", __func__, buf[OFFSET_7]);
switch (buf[OFFSET_7]) {
case 0:
- if (instance->u.atm_dev->signal != ATM_PHY_SIG_LOST) {
- instance->u.atm_dev->signal = ATM_PHY_SIG_LOST;
- printk(KERN_NOTICE "ADSL line is down\n");
+ if (atm_dev->signal != ATM_PHY_SIG_LOST) {
+ atm_dev->signal = ATM_PHY_SIG_LOST;
+ atm_info(usbatm, "ADSL line is down\n");
+ /* It'll never resync again unless we ask it to... */
+ ret = speedtch_start_synchro(instance);
}
break;
case 0x08:
- if (instance->u.atm_dev->signal != ATM_PHY_SIG_UNKNOWN) {
- instance->u.atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
- printk(KERN_NOTICE "ADSL line is blocked?\n");
+ if (atm_dev->signal != ATM_PHY_SIG_UNKNOWN) {
+ atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
+ atm_info(usbatm, "ADSL line is blocked?\n");
}
break;
case 0x10:
- if (instance->u.atm_dev->signal != ATM_PHY_SIG_LOST) {
- instance->u.atm_dev->signal = ATM_PHY_SIG_LOST;
- printk(KERN_NOTICE "ADSL line is synchronising\n");
+ if (atm_dev->signal != ATM_PHY_SIG_LOST) {
+ atm_dev->signal = ATM_PHY_SIG_LOST;
+ atm_info(usbatm, "ADSL line is synchronising\n");
}
break;
case 0x20:
- if (instance->u.atm_dev->signal != ATM_PHY_SIG_FOUND) {
+ if (atm_dev->signal != ATM_PHY_SIG_FOUND) {
int down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8)
| (buf[OFFSET_b + 2] << 16) | (buf[OFFSET_b + 3] << 24);
int up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8)
| (buf[OFFSET_b + 6] << 16) | (buf[OFFSET_b + 7] << 24);
- if (!(down_speed & 0x0000ffff) &&
- !(up_speed & 0x0000ffff)) {
+ if (!(down_speed & 0x0000ffff) && !(up_speed & 0x0000ffff)) {
down_speed >>= 16;
up_speed >>= 16;
}
- instance->u.atm_dev->link_rate = down_speed * 1000 / 424;
- instance->u.atm_dev->signal = ATM_PHY_SIG_FOUND;
- printk(KERN_NOTICE
- "ADSL line is up (%d Kib/s down | %d Kib/s up)\n",
- down_speed, up_speed);
+ atm_dev->link_rate = down_speed * 1000 / 424;
+ atm_dev->signal = ATM_PHY_SIG_FOUND;
+
+ atm_info(usbatm,
+ "ADSL line is up (%d Kib/s down | %d Kib/s up)\n",
+ down_speed, up_speed);
}
break;
default:
- if (instance->u.atm_dev->signal != ATM_PHY_SIG_UNKNOWN) {
- instance->u.atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
- printk(KERN_NOTICE "Unknown line state %02x\n", buf[OFFSET_7]);
+ if (atm_dev->signal != ATM_PHY_SIG_UNKNOWN) {
+ atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
+ atm_info(usbatm, "Unknown line state %02x\n", buf[OFFSET_7]);
}
break;
}
}
-static void speedtch_timer_poll(unsigned long data)
+static void speedtch_status_poll(unsigned long data)
{
struct speedtch_instance_data *instance = (void *)data;
- schedule_work(&instance->poll_work);
- mod_timer(&instance->poll_timer, jiffies + (5 * HZ));
+ schedule_work(&instance->status_checker);
+
+ /* The following check is racy, but the race is harmless */
+ if (instance->poll_delay < MAX_POLL_DELAY)
+ mod_timer(&instance->status_checker.timer, jiffies + msecs_to_jiffies(instance->poll_delay));
+ else
+ atm_warn(instance->usbatm, "Too many failures - disabling line status polling\n");
}
-#ifdef USE_FW_LOADER
-static void speedtch_upload_firmware(struct speedtch_instance_data *instance,
- const struct firmware *fw1,
- const struct firmware *fw2)
+static void speedtch_resubmit_int(unsigned long data)
{
- unsigned char *buffer;
- struct usb_device *usb_dev = instance->u.usb_dev;
- struct usb_interface *intf;
- int actual_length, ret;
- int offset;
-
- dbg("speedtch_upload_firmware");
-
- if (!(intf = usb_ifnum_to_if(usb_dev, 2))) {
- dbg("speedtch_upload_firmware: interface not found!");
- goto fail;
- }
-
- if (!(buffer = (unsigned char *)__get_free_page(GFP_KERNEL))) {
- dbg("speedtch_upload_firmware: no memory for buffer!");
- goto fail;
- }
-
- /* A user-space firmware loader may already have claimed interface #2 */
- if ((ret =
- usb_driver_claim_interface(&speedtch_usb_driver, intf, NULL)) < 0) {
- dbg("speedtch_upload_firmware: interface in use (%d)!", ret);
- goto fail_free;
- }
-
- /* URB 7 */
- if (dl_512_first) { /* some modems need a read before writing the firmware */
- ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE),
- buffer, 0x200, &actual_length, 2000);
-
- if (ret < 0 && ret != -ETIMEDOUT)
- dbg("speedtch_upload_firmware: read BLOCK0 from modem failed (%d)!", ret);
- else
- dbg("speedtch_upload_firmware: BLOCK0 downloaded (%d bytes)", ret);
- }
-
- /* URB 8 : both leds are static green */
- for (offset = 0; offset < fw1->size; offset += PAGE_SIZE) {
- int thislen = min_t(int, PAGE_SIZE, fw1->size - offset);
- memcpy(buffer, fw1->data + offset, thislen);
+ struct speedtch_instance_data *instance = (void *)data;
+ struct urb *int_urb = instance->int_urb;
+ int ret;
- ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE),
- buffer, thislen, &actual_length, DATA_TIMEOUT);
+ atm_dbg(instance->usbatm, "%s entered\n", __func__);
- if (ret < 0) {
- dbg("speedtch_upload_firmware: write BLOCK1 to modem failed (%d)!", ret);
- goto fail_release;
+ if (int_urb) {
+ ret = usb_submit_urb(int_urb, GFP_ATOMIC);
+ if (!ret)
+ schedule_work(&instance->status_checker);
+ else {
+ atm_dbg(instance->usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
+ mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
}
- dbg("speedtch_upload_firmware: BLOCK1 uploaded (%zu bytes)", fw1->size);
}
+}
- /* USB led blinking green, ADSL led off */
+static void speedtch_handle_int(struct urb *int_urb, struct pt_regs *regs)
+{
+ struct speedtch_instance_data *instance = int_urb->context;
+ struct usbatm_data *usbatm = instance->usbatm;
+ unsigned int count = int_urb->actual_length;
+ int ret = int_urb->status;
- /* URB 11 */
- ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE),
- buffer, 0x200, &actual_length, DATA_TIMEOUT);
+ /* The magic interrupt for "up state" */
+ const static unsigned char up_int[6] = { 0xa1, 0x00, 0x01, 0x00, 0x00, 0x00 };
+ /* The magic interrupt for "down state" */
+ const static unsigned char down_int[6] = { 0xa1, 0x00, 0x00, 0x00, 0x00, 0x00 };
+
+ atm_dbg(usbatm, "%s entered\n", __func__);
if (ret < 0) {
- dbg("speedtch_upload_firmware: read BLOCK2 from modem failed (%d)!", ret);
- goto fail_release;
+ atm_dbg(usbatm, "%s: nonzero urb status %d!\n", __func__, ret);
+ goto fail;
}
- dbg("speedtch_upload_firmware: BLOCK2 downloaded (%d bytes)", actual_length);
- /* URBs 12 to 139 - USB led blinking green, ADSL led off */
- for (offset = 0; offset < fw2->size; offset += PAGE_SIZE) {
- int thislen = min_t(int, PAGE_SIZE, fw2->size - offset);
- memcpy(buffer, fw2->data + offset, thislen);
+ if ((count == 6) && !memcmp(up_int, instance->int_data, 6)) {
+ del_timer(&instance->status_checker.timer);
+ atm_info(usbatm, "DSL line goes up\n");
+ } else if ((count == 6) && !memcmp(down_int, instance->int_data, 6)) {
+ atm_info(usbatm, "DSL line goes down\n");
+ } else {
+ int i;
- ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE),
- buffer, thislen, &actual_length, DATA_TIMEOUT);
+ atm_dbg(usbatm, "%s: unknown interrupt packet of length %d:", __func__, count);
+ for (i = 0; i < count; i++)
+ printk(" %02x", instance->int_data[i]);
+ printk("\n");
+ goto fail;
+ }
+ if ((int_urb = instance->int_urb)) {
+ ret = usb_submit_urb(int_urb, GFP_ATOMIC);
+ schedule_work(&instance->status_checker);
if (ret < 0) {
- dbg("speedtch_upload_firmware: write BLOCK3 to modem failed (%d)!", ret);
- goto fail_release;
+ atm_dbg(usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
+ goto fail;
}
}
- dbg("speedtch_upload_firmware: BLOCK3 uploaded (%zu bytes)", fw2->size);
-
- /* USB led static green, ADSL led static red */
-
- /* URB 142 */
- ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE),
- buffer, 0x200, &actual_length, DATA_TIMEOUT);
-
- if (ret < 0) {
- dbg("speedtch_upload_firmware: read BLOCK4 from modem failed (%d)!", ret);
- goto fail_release;
- }
-
- /* success */
- dbg("speedtch_upload_firmware: BLOCK4 downloaded (%d bytes)", actual_length);
-
- /* Delay to allow firmware to start up. We can do this here
- because we're in our own kernel thread anyway. */
- msleep(1000);
-
- /* Enable software buffering, if requested */
- if (sw_buffering)
- speedtch_set_swbuff(instance, 1);
-
- /* Magic spell; don't ask us what this does */
- speedtch_test_sequence(instance);
-
- /* Start modem synchronisation */
- if (speedtch_start_synchro(instance))
- dbg("speedtch_start_synchro: failed");
-
- speedtch_got_firmware(instance, 1);
- free_page((unsigned long)buffer);
return;
- fail_release:
- /* Only release interface #2 if uploading failed; we don't release it
- we succeeded. This prevents the userspace tools from trying to load
- the firmware themselves */
- usb_driver_release_interface(&speedtch_usb_driver, intf);
- fail_free:
- free_page((unsigned long)buffer);
- fail:
- speedtch_got_firmware(instance, 0);
+fail:
+ if ((int_urb = instance->int_urb))
+ mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
}
-static int speedtch_find_firmware(struct speedtch_instance_data
- *instance, int phase,
- const struct firmware **fw_p)
+static int speedtch_atm_start(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
{
- char buf[24];
- const u16 bcdDevice = le16_to_cpu(instance->u.usb_dev->descriptor.bcdDevice);
- const u8 major_revision = bcdDevice >> 8;
- const u8 minor_revision = bcdDevice & 0xff;
-
- sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision);
- dbg("speedtch_find_firmware: looking for %s", buf);
-
- if (request_firmware(fw_p, buf, &instance->u.usb_dev->dev)) {
- sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision);
- dbg("speedtch_find_firmware: looking for %s", buf);
+ struct usb_device *usb_dev = usbatm->usb_dev;
+ struct speedtch_instance_data *instance = usbatm->driver_data;
+ int i, ret;
+ unsigned char mac_str[13];
- if (request_firmware(fw_p, buf, &instance->u.usb_dev->dev)) {
- sprintf(buf, "speedtch-%d.bin", phase);
- dbg("speedtch_find_firmware: looking for %s", buf);
+ atm_dbg(usbatm, "%s entered\n", __func__);
- if (request_firmware(fw_p, buf, &instance->u.usb_dev->dev)) {
- dev_warn(&instance->u.usb_dev->dev, "no stage %d firmware found!", phase);
- return -ENOENT;
- }
- }
+ if ((ret = usb_set_interface(usb_dev, 1, altsetting)) < 0) {
+ atm_dbg(usbatm, "%s: usb_set_interface returned %d!\n", __func__, ret);
+ return ret;
}
- dev_info(&instance->u.usb_dev->dev, "found stage %d firmware %s\n", phase, buf);
-
- return 0;
-}
-
-static int speedtch_load_firmware(void *arg)
-{
- const struct firmware *fw1, *fw2;
- struct speedtch_instance_data *instance = arg;
-
- BUG_ON(!instance);
+ /* Set MAC address, it is stored in the serial number */
+ memset(atm_dev->esi, 0, sizeof(atm_dev->esi));
+ if (usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) {
+ for (i = 0; i < 6; i++)
+ atm_dev->esi[i] = (hex2int(mac_str[i * 2]) * 16) + (hex2int(mac_str[i * 2 + 1]));
+ }
- daemonize("firmware/speedtch");
+ /* Start modem synchronisation */
+ ret = speedtch_start_synchro(instance);
- if (!speedtch_find_firmware(instance, 1, &fw1)) {
- if (!speedtch_find_firmware(instance, 2, &fw2)) {
- speedtch_upload_firmware(instance, fw1, fw2);
- release_firmware(fw2);
+ /* Set up interrupt endpoint */
+ if (instance->int_urb) {
+ ret = usb_submit_urb(instance->int_urb, GFP_KERNEL);
+ if (ret < 0) {
+ /* Doesn't matter; we'll poll anyway */
+ atm_dbg(usbatm, "%s: submission of interrupt URB failed (%d)!\n", __func__, ret);
+ usb_free_urb(instance->int_urb);
+ instance->int_urb = NULL;
}
- release_firmware(fw1);
}
- /* In case we failed, set state back to NO_FIRMWARE so that
- another later attempt may work. Otherwise, we never actually
- manage to recover if, for example, the firmware is on /usr and
- we look for it too early. */
- speedtch_got_firmware(instance, 0);
+ /* Start status polling */
+ mod_timer(&instance->status_checker.timer, jiffies + msecs_to_jiffies(1000));
- module_put(THIS_MODULE);
- udsl_put_instance(&instance->u);
return 0;
}
-#endif /* USE_FW_LOADER */
-static void speedtch_firmware_start(struct speedtch_instance_data *instance)
+static void speedtch_atm_stop(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
{
-#ifdef USE_FW_LOADER
- int ret;
-#endif
-
- dbg("speedtch_firmware_start");
-
- down(&instance->u.serialize); /* vs self, speedtch_got_firmware */
-
- if (instance->u.status >= UDSL_LOADING_FIRMWARE) {
- up(&instance->u.serialize);
- return;
- }
+ struct speedtch_instance_data *instance = usbatm->driver_data;
+ struct urb *int_urb = instance->int_urb;
+
+ atm_dbg(usbatm, "%s entered\n", __func__);
+
+ del_timer_sync(&instance->status_checker.timer);
+
+ /*
+ * Since resubmit_timer and int_urb can schedule themselves and
+ * each other, shutting them down correctly takes some care
+ */
+ instance->int_urb = NULL; /* signal shutdown */
+ mb();
+ usb_kill_urb(int_urb);
+ del_timer_sync(&instance->resubmit_timer);
+ /*
+ * At this point, speedtch_handle_int and speedtch_resubmit_int
+ * can run or be running, but instance->int_urb == NULL means that
+ * they will not reschedule
+ */
+ usb_kill_urb(int_urb);
+ del_timer_sync(&instance->resubmit_timer);
+ usb_free_urb(int_urb);
- instance->u.status = UDSL_LOADING_FIRMWARE;
- up(&instance->u.serialize);
+ flush_scheduled_work();
+}
-#ifdef USE_FW_LOADER
- udsl_get_instance(&instance->u);
- try_module_get(THIS_MODULE);
- ret = kernel_thread(speedtch_load_firmware, instance,
- CLONE_FS | CLONE_FILES);
+/**********
+** USB **
+**********/
- if (ret >= 0)
- return; /* OK */
+static struct usb_device_id speedtch_usb_ids[] = {
+ {USB_DEVICE(0x06b9, 0x4061)},
+ {}
+};
- dbg("speedtch_firmware_start: kernel_thread failed (%d)!", ret);
+MODULE_DEVICE_TABLE(usb, speedtch_usb_ids);
- module_put(THIS_MODULE);
- udsl_put_instance(&instance->u);
- /* Just pretend it never happened... hope modem_run happens */
-#endif /* USE_FW_LOADER */
+static int speedtch_usb_probe(struct usb_interface *, const struct usb_device_id *);
- speedtch_got_firmware(instance, 0);
-}
-
-static int speedtch_firmware_wait(struct udsl_instance_data *instance)
-{
- speedtch_firmware_start((void *)instance);
+static struct usb_driver speedtch_usb_driver = {
+ .owner = THIS_MODULE,
+ .name = speedtch_driver_name,
+ .probe = speedtch_usb_probe,
+ .disconnect = usbatm_usb_disconnect,
+ .id_table = speedtch_usb_ids
+};
- if (wait_event_interruptible(instance->firmware_waiters, instance->status != UDSL_LOADING_FIRMWARE) < 0)
- return -ERESTARTSYS;
+static void speedtch_release_interfaces(struct usb_device *usb_dev, int num_interfaces) {
+ struct usb_interface *cur_intf;
+ int i;
- return (instance->status == UDSL_LOADED_FIRMWARE) ? 0 : -EAGAIN;
+ for(i = 0; i < num_interfaces; i++)
+ if ((cur_intf = usb_ifnum_to_if(usb_dev, i))) {
+ usb_set_intfdata(cur_intf, NULL);
+ usb_driver_release_interface(&speedtch_usb_driver, cur_intf);
+ }
}
-/**********
-** USB **
-**********/
-
-static int speedtch_usb_ioctl(struct usb_interface *intf, unsigned int code,
- void *user_data)
+static int speedtch_bind(struct usbatm_data *usbatm,
+ struct usb_interface *intf,
+ const struct usb_device_id *id,
+ int *need_heavy_init)
{
- struct speedtch_instance_data *instance = usb_get_intfdata(intf);
+ struct usb_device *usb_dev = interface_to_usbdev(intf);
+ struct usb_interface *cur_intf;
+ struct speedtch_instance_data *instance;
+ int ifnum = intf->altsetting->desc.bInterfaceNumber;
+ int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces;
+ int i, ret;
- dbg("speedtch_usb_ioctl entered");
+ usb_dbg(usbatm, "%s entered\n", __func__);
- if (!instance) {
- dbg("speedtch_usb_ioctl: NULL instance!");
+ if (usb_dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) {
+ usb_dbg(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass);
return -ENODEV;
}
- switch (code) {
- case UDSL_IOCTL_LINE_UP:
- instance->u.atm_dev->signal = ATM_PHY_SIG_FOUND;
- speedtch_got_firmware(instance, 1);
- return (instance->u.status == UDSL_LOADED_FIRMWARE) ? 0 : -EIO;
- case UDSL_IOCTL_LINE_DOWN:
- instance->u.atm_dev->signal = ATM_PHY_SIG_LOST;
- return 0;
- default:
- return -ENOTTY;
- }
-}
+ /* claim all interfaces */
-static int speedtch_usb_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- struct usb_device *dev = interface_to_usbdev(intf);
- int ifnum = intf->altsetting->desc.bInterfaceNumber;
- struct speedtch_instance_data *instance;
- unsigned char mac_str[13];
- int ret, i;
- char buf7[SIZE_7];
+ for (i=0; i < num_interfaces; i++) {
+ cur_intf = usb_ifnum_to_if(usb_dev, i);
- dbg("speedtch_usb_probe: trying device with vendor=0x%x, product=0x%x, ifnum %d",
- le16_to_cpu(dev->descriptor.idVendor),
- le16_to_cpu(dev->descriptor.idProduct), ifnum);
+ if ((i != ifnum) && cur_intf) {
+ ret = usb_driver_claim_interface(&speedtch_usb_driver, cur_intf, usbatm);
- if ((dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) ||
- (ifnum != 1))
- return -ENODEV;
-
- dbg("speedtch_usb_probe: device accepted");
+ if (ret < 0) {
+ usb_dbg(usbatm, "%s: failed to claim interface %d (%d)\n", __func__, i, ret);
+ speedtch_release_interfaces(usb_dev, i);
+ return ret;
+ }
+ }
+ }
- /* instance init */
instance = kmalloc(sizeof(*instance), GFP_KERNEL);
+
if (!instance) {
- dbg("speedtch_usb_probe: no memory for instance data!");
- return -ENOMEM;
+ usb_dbg(usbatm, "%s: no memory for instance data!\n", __func__);
+ ret = -ENOMEM;
+ goto fail_release;
}
memset(instance, 0, sizeof(struct speedtch_instance_data));
- if ((ret = usb_set_interface(dev, 0, 0)) < 0)
- goto fail;
+ instance->usbatm = usbatm;
- if ((ret = usb_set_interface(dev, 2, 0)) < 0)
- goto fail;
+ INIT_WORK(&instance->status_checker, (void *)speedtch_check_status, instance);
- instance->u.data_endpoint = SPEEDTCH_ENDPOINT_DATA;
- instance->u.firmware_wait = speedtch_firmware_wait;
- instance->u.driver_name = speedtch_driver_name;
+ instance->status_checker.timer.function = speedtch_status_poll;
+ instance->status_checker.timer.data = (unsigned long)instance;
+ instance->poll_delay = MIN_POLL_DELAY;
- ret = udsl_instance_setup(dev, &instance->u);
- if (ret)
- goto fail;
+ init_timer(&instance->resubmit_timer);
+ instance->resubmit_timer.function = speedtch_resubmit_int;
+ instance->resubmit_timer.data = (unsigned long)instance;
- init_timer(&instance->poll_timer);
- instance->poll_timer.function = speedtch_timer_poll;
- instance->poll_timer.data = (unsigned long)instance;
+ instance->int_urb = usb_alloc_urb(0, GFP_KERNEL);
- INIT_WORK(&instance->poll_work, (void *)speedtch_poll_status, instance);
+ if (instance->int_urb)
+ usb_fill_int_urb(instance->int_urb, usb_dev,
+ usb_rcvintpipe(usb_dev, ENDPOINT_INT),
+ instance->int_data, sizeof(instance->int_data),
+ speedtch_handle_int, instance, 50);
+ else
+ usb_dbg(usbatm, "%s: no memory for interrupt urb!\n", __func__);
- /* set MAC address, it is stored in the serial number */
- memset(instance->u.atm_dev->esi, 0, sizeof(instance->u.atm_dev->esi));
- if (usb_string(dev, dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) {
- for (i = 0; i < 6; i++)
- instance->u.atm_dev->esi[i] =
- (hex2int(mac_str[i * 2]) * 16) + (hex2int(mac_str[i * 2 + 1]));
- }
+ /* check whether the modem already seems to be alive */
+ ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+ 0x12, 0xc0, 0x07, 0x00,
+ instance->scratch_buffer + OFFSET_7, SIZE_7, 500);
- /* First check whether the modem already seems to be alive */
- ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
- 0x12, 0xc0, 0x07, 0x00, buf7, SIZE_7, 500);
+ *need_heavy_init = (ret != SIZE_7);
- if (ret == SIZE_7) {
- dbg("firmware appears to be already loaded");
- speedtch_got_firmware(instance, 1);
- speedtch_poll_status(instance);
- } else {
- speedtch_firmware_start(instance);
- }
+ usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, need_heavy_init ? "not" : "already");
+
+ if (*need_heavy_init)
+ if ((ret = usb_reset_device(usb_dev)) < 0)
+ goto fail_free;
- usb_set_intfdata(intf, instance);
+ usbatm->driver_data = instance;
return 0;
- fail:
+fail_free:
+ usb_free_urb(instance->int_urb);
kfree(instance);
-
- return -ENOMEM;
+fail_release:
+ speedtch_release_interfaces(usb_dev, num_interfaces);
+ return ret;
}
-static void speedtch_usb_disconnect(struct usb_interface *intf)
+static void speedtch_unbind(struct usbatm_data *usbatm, struct usb_interface *intf)
{
- struct speedtch_instance_data *instance = usb_get_intfdata(intf);
-
- dbg("speedtch_usb_disconnect entered");
-
- if (!instance) {
- dbg("speedtch_usb_disconnect: NULL instance!");
- return;
- }
+ struct usb_device *usb_dev = interface_to_usbdev(intf);
+ struct speedtch_instance_data *instance = usbatm->driver_data;
-/*QQ need to handle disconnects on interface #2 while uploading firmware */
-/*QQ and what about interface #1? */
-
- if (instance->int_urb) {
- struct urb *int_urb = instance->int_urb;
- instance->int_urb = NULL;
- wmb();
- usb_unlink_urb(int_urb);
- usb_free_urb(int_urb);
- }
+ usb_dbg(usbatm, "%s entered\n", __func__);
- instance->int_data[0] = 1;
- del_timer_sync(&instance->poll_timer);
- wmb();
- flush_scheduled_work();
-
- udsl_instance_disconnect(&instance->u);
-
- /* clean up */
- usb_set_intfdata(intf, NULL);
- udsl_put_instance(&instance->u);
+ speedtch_release_interfaces(usb_dev, usb_dev->actconfig->desc.bNumInterfaces);
+ usb_free_urb(instance->int_urb);
+ kfree(instance);
}
+
/***********
** init **
***********/
+static struct usbatm_driver speedtch_usbatm_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = speedtch_driver_name,
+ .bind = speedtch_bind,
+ .heavy_init = speedtch_heavy_init,
+ .unbind = speedtch_unbind,
+ .atm_start = speedtch_atm_start,
+ .atm_stop = speedtch_atm_stop,
+ .in = ENDPOINT_DATA,
+ .out = ENDPOINT_DATA
+};
+
+static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ return usbatm_usb_probe(intf, id, &speedtch_usbatm_driver);
+}
+
static int __init speedtch_usb_init(void)
{
- dbg("speedtch_usb_init: driver version " DRIVER_VERSION);
+ dbg("%s: driver version %s", __func__, DRIVER_VERSION);
return usb_register(&speedtch_usb_driver);
}
static void __exit speedtch_usb_cleanup(void)
{
- dbg("speedtch_usb_cleanup entered");
+ dbg("%s", __func__);
usb_deregister(&speedtch_usb_driver);
}