summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-10-15 19:26:12 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2016-10-15 19:26:12 +0300
commit133d970e0dadf7b413db19893acc5b26664bf4a1 (patch)
treeea10732ca1d0f663ef1319973947a7c72cf170e7 /drivers
parent050aaeab99067b6a08b34274ff15ca5dbb94a160 (diff)
parent38b8767462120c62a5046b529c80b06861f9ac85 (diff)
downloadlinux-133d970e0dadf7b413db19893acc5b26664bf4a1.tar.xz
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/auxdisplay/Kconfig9
-rw-r--r--drivers/auxdisplay/Makefile1
-rw-r--r--drivers/auxdisplay/img-ascii-lcd.c443
-rw-r--r--drivers/cpuidle/Kconfig.mips2
-rw-r--r--drivers/cpuidle/cpuidle-cps.c2
-rw-r--r--drivers/irqchip/irq-i8259.c30
-rw-r--r--drivers/of/platform.c1
-rw-r--r--drivers/usb/host/ehci-hcd.c5
-rw-r--r--drivers/usb/host/ehci-sead3.c185
-rw-r--r--drivers/video/fbdev/Kconfig2
-rw-r--r--drivers/video/fbdev/cobalt_lcdfb.c42
11 files changed, 467 insertions, 255 deletions
diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index c07e725ea93d..10e1b9eee10e 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -119,4 +119,13 @@ config CFAG12864B_RATE
If you compile this as a module, you can still override this
value using the module parameters.
+config IMG_ASCII_LCD
+ tristate "Imagination Technologies ASCII LCD Display"
+ default y if MIPS_MALTA || MIPS_SEAD3
+ select SYSCON
+ help
+ Enable this to support the simple ASCII LCD displays found on
+ development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3
+ from Imagination Technologies.
+
endif # AUXDISPLAY
diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile
index 8a8936a468b9..3127175c89df 100644
--- a/drivers/auxdisplay/Makefile
+++ b/drivers/auxdisplay/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_KS0108) += ks0108.o
obj-$(CONFIG_CFAG12864B) += cfag12864b.o cfag12864bfb.o
+obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o
diff --git a/drivers/auxdisplay/img-ascii-lcd.c b/drivers/auxdisplay/img-ascii-lcd.c
new file mode 100644
index 000000000000..bf43b5d2aafc
--- /dev/null
+++ b/drivers/auxdisplay/img-ascii-lcd.c
@@ -0,0 +1,443 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <generated/utsrelease.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+struct img_ascii_lcd_ctx;
+
+/**
+ * struct img_ascii_lcd_config - Configuration information about an LCD model
+ * @num_chars: the number of characters the LCD can display
+ * @external_regmap: true if registers are in a system controller, else false
+ * @update: function called to update the LCD
+ */
+struct img_ascii_lcd_config {
+ unsigned int num_chars;
+ bool external_regmap;
+ void (*update)(struct img_ascii_lcd_ctx *ctx);
+};
+
+/**
+ * struct img_ascii_lcd_ctx - Private data structure
+ * @pdev: the ASCII LCD platform device
+ * @base: the base address of the LCD registers
+ * @regmap: the regmap through which LCD registers are accessed
+ * @offset: the offset within regmap to the start of the LCD registers
+ * @cfg: pointer to the LCD model configuration
+ * @message: the full message to display or scroll on the LCD
+ * @message_len: the length of the @message string
+ * @scroll_pos: index of the first character of @message currently displayed
+ * @scroll_rate: scroll interval in jiffies
+ * @timer: timer used to implement scrolling
+ * @curr: the string currently displayed on the LCD
+ */
+struct img_ascii_lcd_ctx {
+ struct platform_device *pdev;
+ union {
+ void __iomem *base;
+ struct regmap *regmap;
+ };
+ u32 offset;
+ const struct img_ascii_lcd_config *cfg;
+ char *message;
+ unsigned int message_len;
+ unsigned int scroll_pos;
+ unsigned int scroll_rate;
+ struct timer_list timer;
+ char curr[] __aligned(8);
+};
+
+/*
+ * MIPS Boston development board
+ */
+
+static void boston_update(struct img_ascii_lcd_ctx *ctx)
+{
+ ulong val;
+
+#if BITS_PER_LONG == 64
+ val = *((u64 *)&ctx->curr[0]);
+ __raw_writeq(val, ctx->base);
+#elif BITS_PER_LONG == 32
+ val = *((u32 *)&ctx->curr[0]);
+ __raw_writel(val, ctx->base);
+ val = *((u32 *)&ctx->curr[4]);
+ __raw_writel(val, ctx->base + 4);
+#else
+# error Not 32 or 64 bit
+#endif
+}
+
+static struct img_ascii_lcd_config boston_config = {
+ .num_chars = 8,
+ .update = boston_update,
+};
+
+/*
+ * MIPS Malta development board
+ */
+
+static void malta_update(struct img_ascii_lcd_ctx *ctx)
+{
+ unsigned int i;
+ int err;
+
+ for (i = 0; i < ctx->cfg->num_chars; i++) {
+ err = regmap_write(ctx->regmap,
+ ctx->offset + (i * 8), ctx->curr[i]);
+ if (err)
+ break;
+ }
+
+ if (unlikely(err))
+ pr_err_ratelimited("Failed to update LCD display: %d\n", err);
+}
+
+static struct img_ascii_lcd_config malta_config = {
+ .num_chars = 8,
+ .external_regmap = true,
+ .update = malta_update,
+};
+
+/*
+ * MIPS SEAD3 development board
+ */
+
+enum {
+ SEAD3_REG_LCD_CTRL = 0x00,
+#define SEAD3_REG_LCD_CTRL_SETDRAM BIT(7)
+ SEAD3_REG_LCD_DATA = 0x08,
+ SEAD3_REG_CPLD_STATUS = 0x10,
+#define SEAD3_REG_CPLD_STATUS_BUSY BIT(0)
+ SEAD3_REG_CPLD_DATA = 0x18,
+#define SEAD3_REG_CPLD_DATA_BUSY BIT(7)
+};
+
+static int sead3_wait_sm_idle(struct img_ascii_lcd_ctx *ctx)
+{
+ unsigned int status;
+ int err;
+
+ do {
+ err = regmap_read(ctx->regmap,
+ ctx->offset + SEAD3_REG_CPLD_STATUS,
+ &status);
+ if (err)
+ return err;
+ } while (status & SEAD3_REG_CPLD_STATUS_BUSY);
+
+ return 0;
+
+}
+
+static int sead3_wait_lcd_idle(struct img_ascii_lcd_ctx *ctx)
+{
+ unsigned int cpld_data;
+ int err;
+
+ err = sead3_wait_sm_idle(ctx);
+ if (err)
+ return err;
+
+ do {
+ err = regmap_read(ctx->regmap,
+ ctx->offset + SEAD3_REG_LCD_CTRL,
+ &cpld_data);
+ if (err)
+ return err;
+
+ err = sead3_wait_sm_idle(ctx);
+ if (err)
+ return err;
+
+ err = regmap_read(ctx->regmap,
+ ctx->offset + SEAD3_REG_CPLD_DATA,
+ &cpld_data);
+ if (err)
+ return err;
+ } while (cpld_data & SEAD3_REG_CPLD_DATA_BUSY);
+
+ return 0;
+}
+
+static void sead3_update(struct img_ascii_lcd_ctx *ctx)
+{
+ unsigned int i;
+ int err;
+
+ for (i = 0; i < ctx->cfg->num_chars; i++) {
+ err = sead3_wait_lcd_idle(ctx);
+ if (err)
+ break;
+
+ err = regmap_write(ctx->regmap,
+ ctx->offset + SEAD3_REG_LCD_CTRL,
+ SEAD3_REG_LCD_CTRL_SETDRAM | i);
+ if (err)
+ break;
+
+ err = sead3_wait_lcd_idle(ctx);
+ if (err)
+ break;
+
+ err = regmap_write(ctx->regmap,
+ ctx->offset + SEAD3_REG_LCD_DATA,
+ ctx->curr[i]);
+ if (err)
+ break;
+ }
+
+ if (unlikely(err))
+ pr_err_ratelimited("Failed to update LCD display: %d\n", err);
+}
+
+static struct img_ascii_lcd_config sead3_config = {
+ .num_chars = 16,
+ .external_regmap = true,
+ .update = sead3_update,
+};
+
+static const struct of_device_id img_ascii_lcd_matches[] = {
+ { .compatible = "img,boston-lcd", .data = &boston_config },
+ { .compatible = "mti,malta-lcd", .data = &malta_config },
+ { .compatible = "mti,sead3-lcd", .data = &sead3_config },
+};
+
+/**
+ * img_ascii_lcd_scroll() - scroll the display by a character
+ * @arg: really a pointer to the private data structure
+ *
+ * Scroll the current message along the LCD by one character, rearming the
+ * timer if required.
+ */
+static void img_ascii_lcd_scroll(unsigned long arg)
+{
+ struct img_ascii_lcd_ctx *ctx = (struct img_ascii_lcd_ctx *)arg;
+ unsigned int i, ch = ctx->scroll_pos;
+ unsigned int num_chars = ctx->cfg->num_chars;
+
+ /* update the current message string */
+ for (i = 0; i < num_chars;) {
+ /* copy as many characters from the string as possible */
+ for (; i < num_chars && ch < ctx->message_len; i++, ch++)
+ ctx->curr[i] = ctx->message[ch];
+
+ /* wrap around to the start of the string */
+ ch = 0;
+ }
+
+ /* update the LCD */
+ ctx->cfg->update(ctx);
+
+ /* move on to the next character */
+ ctx->scroll_pos++;
+ ctx->scroll_pos %= ctx->message_len;
+
+ /* rearm the timer */
+ if (ctx->message_len > ctx->cfg->num_chars)
+ mod_timer(&ctx->timer, jiffies + ctx->scroll_rate);
+}
+
+/**
+ * img_ascii_lcd_display() - set the message to be displayed
+ * @ctx: pointer to the private data structure
+ * @msg: the message to display
+ * @count: length of msg, or -1
+ *
+ * Display a new message @msg on the LCD. @msg can be longer than the number of
+ * characters the LCD can display, in which case it will begin scrolling across
+ * the LCD display.
+ *
+ * Return: 0 on success, -ENOMEM on memory allocation failure
+ */
+static int img_ascii_lcd_display(struct img_ascii_lcd_ctx *ctx,
+ const char *msg, ssize_t count)
+{
+ char *new_msg;
+
+ /* stop the scroll timer */
+ del_timer_sync(&ctx->timer);
+
+ if (count == -1)
+ count = strlen(msg);
+
+ /* if the string ends with a newline, trim it */
+ if (msg[count - 1] == '\n')
+ count--;
+
+ new_msg = devm_kmalloc(&ctx->pdev->dev, count + 1, GFP_KERNEL);
+ if (!new_msg)
+ return -ENOMEM;
+
+ memcpy(new_msg, msg, count);
+ new_msg[count] = 0;
+
+ if (ctx->message)
+ devm_kfree(&ctx->pdev->dev, ctx->message);
+
+ ctx->message = new_msg;
+ ctx->message_len = count;
+ ctx->scroll_pos = 0;
+
+ /* update the LCD */
+ img_ascii_lcd_scroll((unsigned long)ctx);
+
+ return 0;
+}
+
+/**
+ * message_show() - read message via sysfs
+ * @dev: the LCD device
+ * @attr: the LCD message attribute
+ * @buf: the buffer to read the message into
+ *
+ * Read the current message being displayed or scrolled across the LCD display
+ * into @buf, for reads from sysfs.
+ *
+ * Return: the number of characters written to @buf
+ */
+static ssize_t message_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct img_ascii_lcd_ctx *ctx = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", ctx->message);
+}
+
+/**
+ * message_store() - write a new message via sysfs
+ * @dev: the LCD device
+ * @attr: the LCD message attribute
+ * @buf: the buffer containing the new message
+ * @count: the size of the message in @buf
+ *
+ * Write a new message to display or scroll across the LCD display from sysfs.
+ *
+ * Return: the size of the message on success, else -ERRNO
+ */
+static ssize_t message_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct img_ascii_lcd_ctx *ctx = dev_get_drvdata(dev);
+ int err;
+
+ err = img_ascii_lcd_display(ctx, buf, count);
+ return err ?: count;
+}
+
+static DEVICE_ATTR_RW(message);
+
+/**
+ * img_ascii_lcd_probe() - probe an LCD display device
+ * @pdev: the LCD platform device
+ *
+ * Probe an LCD display device, ensuring that we have the required resources in
+ * order to access the LCD & setting up private data as well as sysfs files.
+ *
+ * Return: 0 on success, else -ERRNO
+ */
+static int img_ascii_lcd_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ const struct img_ascii_lcd_config *cfg;
+ struct img_ascii_lcd_ctx *ctx;
+ struct resource *res;
+ int err;
+
+ match = of_match_device(img_ascii_lcd_matches, &pdev->dev);
+ if (!match)
+ return -ENODEV;
+
+ cfg = match->data;
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx) + cfg->num_chars,
+ GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ if (cfg->external_regmap) {
+ ctx->regmap = syscon_node_to_regmap(pdev->dev.parent->of_node);
+ if (IS_ERR(ctx->regmap))
+ return PTR_ERR(ctx->regmap);
+
+ if (of_property_read_u32(pdev->dev.of_node, "offset",
+ &ctx->offset))
+ return -EINVAL;
+ } else {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ctx->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ctx->base))
+ return PTR_ERR(ctx->base);
+ }
+
+ ctx->pdev = pdev;
+ ctx->cfg = cfg;
+ ctx->message = NULL;
+ ctx->scroll_pos = 0;
+ ctx->scroll_rate = HZ / 2;
+
+ /* initialise a timer for scrolling the message */
+ init_timer(&ctx->timer);
+ ctx->timer.function = img_ascii_lcd_scroll;
+ ctx->timer.data = (unsigned long)ctx;
+
+ platform_set_drvdata(pdev, ctx);
+
+ /* display a default message */
+ err = img_ascii_lcd_display(ctx, "Linux " UTS_RELEASE " ", -1);
+ if (err)
+ goto out_del_timer;
+
+ err = device_create_file(&pdev->dev, &dev_attr_message);
+ if (err)
+ goto out_del_timer;
+
+ return 0;
+out_del_timer:
+ del_timer_sync(&ctx->timer);
+ return err;
+}
+
+/**
+ * img_ascii_lcd_remove() - remove an LCD display device
+ * @pdev: the LCD platform device
+ *
+ * Remove an LCD display device, freeing private resources & ensuring that the
+ * driver stops using the LCD display registers.
+ *
+ * Return: 0
+ */
+static int img_ascii_lcd_remove(struct platform_device *pdev)
+{
+ struct img_ascii_lcd_ctx *ctx = platform_get_drvdata(pdev);
+
+ device_remove_file(&pdev->dev, &dev_attr_message);
+ del_timer_sync(&ctx->timer);
+ return 0;
+}
+
+static struct platform_driver img_ascii_lcd_driver = {
+ .driver = {
+ .name = "img-ascii-lcd",
+ .of_match_table = img_ascii_lcd_matches,
+ },
+ .probe = img_ascii_lcd_probe,
+ .remove = img_ascii_lcd_remove,
+};
+module_platform_driver(img_ascii_lcd_driver);
diff --git a/drivers/cpuidle/Kconfig.mips b/drivers/cpuidle/Kconfig.mips
index 4102be01d06a..512ee37b374b 100644
--- a/drivers/cpuidle/Kconfig.mips
+++ b/drivers/cpuidle/Kconfig.mips
@@ -5,7 +5,7 @@ config MIPS_CPS_CPUIDLE
bool "CPU Idle driver for MIPS CPS platforms"
depends on CPU_IDLE && MIPS_CPS
depends on SYS_SUPPORTS_MIPS_CPS
- select ARCH_NEEDS_CPU_IDLE_COUPLED if MIPS_MT
+ select ARCH_NEEDS_CPU_IDLE_COUPLED if MIPS_MT || CPU_MIPSR6
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select MIPS_CPS_PM
default y
diff --git a/drivers/cpuidle/cpuidle-cps.c b/drivers/cpuidle/cpuidle-cps.c
index 1adb6980b707..926ba9871c62 100644
--- a/drivers/cpuidle/cpuidle-cps.c
+++ b/drivers/cpuidle/cpuidle-cps.c
@@ -163,7 +163,7 @@ static int __init cps_cpuidle_init(void)
core = cpu_data[cpu].core;
device = &per_cpu(cpuidle_dev, cpu);
device->cpu = cpu;
-#ifdef CONFIG_MIPS_MT
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
cpumask_copy(&device->coupled_cpus, &cpu_sibling_map[cpu]);
#endif
diff --git a/drivers/irqchip/irq-i8259.c b/drivers/irqchip/irq-i8259.c
index 6b304eb39bd2..1aec12c6d9ac 100644
--- a/drivers/irqchip/irq-i8259.c
+++ b/drivers/irqchip/irq-i8259.c
@@ -38,6 +38,7 @@ static void disable_8259A_irq(struct irq_data *d);
static void enable_8259A_irq(struct irq_data *d);
static void mask_and_ack_8259A(struct irq_data *d);
static void init_8259A(int auto_eoi);
+static int (*i8259_poll)(void) = i8259_irq;
static struct irq_chip i8259A_chip = {
.name = "XT-PIC",
@@ -51,6 +52,11 @@ static struct irq_chip i8259A_chip = {
* 8259A PIC functions to handle ISA devices:
*/
+void i8259_set_poll(int (*poll)(void))
+{
+ i8259_poll = poll;
+}
+
/*
* This contains the irq mask for both 8259A irq controllers,
*/
@@ -89,24 +95,6 @@ static void enable_8259A_irq(struct irq_data *d)
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
-int i8259A_irq_pending(unsigned int irq)
-{
- unsigned int mask;
- unsigned long flags;
- int ret;
-
- irq -= I8259A_IRQ_BASE;
- mask = 1 << irq;
- raw_spin_lock_irqsave(&i8259A_lock, flags);
- if (irq < 8)
- ret = inb(PIC_MASTER_CMD) & mask;
- else
- ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
- raw_spin_unlock_irqrestore(&i8259A_lock, flags);
-
- return ret;
-}
-
void make_8259A_irq(unsigned int irq)
{
disable_irq_nosync(irq);
@@ -355,7 +343,7 @@ void __init init_i8259_irqs(void)
static void i8259_irq_dispatch(struct irq_desc *desc)
{
struct irq_domain *domain = irq_desc_get_handler_data(desc);
- int hwirq = i8259_irq();
+ int hwirq = i8259_poll();
unsigned int irq;
if (hwirq < 0)
@@ -370,13 +358,15 @@ int __init i8259_of_init(struct device_node *node, struct device_node *parent)
struct irq_domain *domain;
unsigned int parent_irq;
+ domain = __init_i8259_irqs(node);
+
parent_irq = irq_of_parse_and_map(node, 0);
if (!parent_irq) {
pr_err("Failed to map i8259 parent IRQ\n");
+ irq_domain_remove(domain);
return -ENODEV;
}
- domain = __init_i8259_irqs(node);
irq_set_chained_handler_and_data(parent_irq, i8259_irq_dispatch,
domain);
return 0;
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index f811d2796437..e4bf07d20f9b 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -29,6 +29,7 @@
const struct of_device_id of_default_bus_match_table[] = {
{ .compatible = "simple-bus", },
{ .compatible = "simple-mfd", },
+ { .compatible = "isa", },
#ifdef CONFIG_ARM_AMBA
{ .compatible = "arm,amba-bus", },
#endif /* CONFIG_ARM_AMBA */
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 1e5f529d51a2..063064801ceb 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1308,11 +1308,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_mv_driver
#endif
-#ifdef CONFIG_MIPS_SEAD3
-#include "ehci-sead3.c"
-#define PLATFORM_DRIVER ehci_hcd_sead3_driver
-#endif
-
static int __init ehci_hcd_init(void)
{
int retval = 0;
diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c
deleted file mode 100644
index 3d86cc2ffe68..000000000000
--- a/drivers/usb/host/ehci-sead3.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * MIPS CI13320A EHCI Host Controller driver
- * Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@amd.com>
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-static int ehci_sead3_setup(struct usb_hcd *hcd)
-{
- int ret;
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
- ehci->caps = hcd->regs + 0x100;
-
-#ifdef __BIG_ENDIAN
- ehci->big_endian_mmio = 1;
- ehci->big_endian_desc = 1;
-#endif
-
- ret = ehci_setup(hcd);
- if (ret)
- return ret;
-
- ehci->need_io_watchdog = 0;
-
- /* Set burst length to 16 words. */
- ehci_writel(ehci, 0x1010, &ehci->regs->reserved1[1]);
-
- return ret;
-}
-
-const struct hc_driver ehci_sead3_hc_driver = {
- .description = hcd_name,
- .product_desc = "SEAD-3 EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
-
- /*
- * basic lifecycle operations
- *
- */
- .reset = ehci_sead3_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_hcd_sead3_drv_probe(struct platform_device *pdev)
-{
- struct usb_hcd *hcd;
- struct resource *res;
- int ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- if (pdev->resource[1].flags != IORESOURCE_IRQ) {
- pr_debug("resource[1] is not IORESOURCE_IRQ");
- return -ENOMEM;
- }
- hcd = usb_create_hcd(&ehci_sead3_hc_driver, &pdev->dev, "SEAD-3");
- if (!hcd)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- hcd->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(hcd->regs)) {
- ret = PTR_ERR(hcd->regs);
- goto err1;
- }
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- /* Root hub has integrated TT. */
- hcd->has_tt = 1;
-
- ret = usb_add_hcd(hcd, pdev->resource[1].start,
- IRQF_SHARED);
- if (ret == 0) {
- platform_set_drvdata(pdev, hcd);
- device_wakeup_enable(hcd->self.controller);
- return ret;
- }
-
-err1:
- usb_put_hcd(hcd);
- return ret;
-}
-
-static int ehci_hcd_sead3_drv_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int ehci_hcd_sead3_drv_suspend(struct device *dev)
-{
- struct usb_hcd *hcd = dev_get_drvdata(dev);
- bool do_wakeup = device_may_wakeup(dev);
-
- return ehci_suspend(hcd, do_wakeup);
-}
-
-static int ehci_hcd_sead3_drv_resume(struct device *dev)
-{
- struct usb_hcd *hcd = dev_get_drvdata(dev);
-
- ehci_resume(hcd, false);
- return 0;
-}
-
-static const struct dev_pm_ops sead3_ehci_pmops = {
- .suspend = ehci_hcd_sead3_drv_suspend,
- .resume = ehci_hcd_sead3_drv_resume,
-};
-
-#define SEAD3_EHCI_PMOPS (&sead3_ehci_pmops)
-
-#else
-#define SEAD3_EHCI_PMOPS NULL
-#endif
-
-static struct platform_driver ehci_hcd_sead3_driver = {
- .probe = ehci_hcd_sead3_drv_probe,
- .remove = ehci_hcd_sead3_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .driver = {
- .name = "sead3-ehci",
- .pm = SEAD3_EHCI_PMOPS,
- }
-};
-
-MODULE_ALIAS("platform:sead3-ehci");
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index af2f117208f1..5d3b0db5ce0a 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -2187,7 +2187,7 @@ config FB_GOLDFISH
config FB_COBALT
tristate "Cobalt server LCD frame buffer support"
- depends on FB && (MIPS_COBALT || MIPS_SEAD3)
+ depends on FB && MIPS_COBALT
config FB_SH7760
bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
diff --git a/drivers/video/fbdev/cobalt_lcdfb.c b/drivers/video/fbdev/cobalt_lcdfb.c
index 07675d6f323e..2d3b691f3fc4 100644
--- a/drivers/video/fbdev/cobalt_lcdfb.c
+++ b/drivers/video/fbdev/cobalt_lcdfb.c
@@ -63,7 +63,6 @@
#define LCD_CUR_POS(x) ((x) & LCD_CUR_POS_MASK)
#define LCD_TEXT_POS(x) ((x) | LCD_TEXT_MODE)
-#ifdef CONFIG_MIPS_COBALT
static inline void lcd_write_control(struct fb_info *info, u8 control)
{
writel((u32)control << 24, info->screen_base);
@@ -83,47 +82,6 @@ static inline u8 lcd_read_data(struct fb_info *info)
{
return readl(info->screen_base + LCD_DATA_REG_OFFSET) >> 24;
}
-#else
-
-#define LCD_CTL 0x00
-#define LCD_DATA 0x08
-#define CPLD_STATUS 0x10
-#define CPLD_DATA 0x18
-
-static inline void cpld_wait(struct fb_info *info)
-{
- do {
- } while (readl(info->screen_base + CPLD_STATUS) & 1);
-}
-
-static inline void lcd_write_control(struct fb_info *info, u8 control)
-{
- cpld_wait(info);
- writel(control, info->screen_base + LCD_CTL);
-}
-
-static inline u8 lcd_read_control(struct fb_info *info)
-{
- cpld_wait(info);
- readl(info->screen_base + LCD_CTL);
- cpld_wait(info);
- return readl(info->screen_base + CPLD_DATA) & 0xff;
-}
-
-static inline void lcd_write_data(struct fb_info *info, u8 data)
-{
- cpld_wait(info);
- writel(data, info->screen_base + LCD_DATA);
-}
-
-static inline u8 lcd_read_data(struct fb_info *info)
-{
- cpld_wait(info);
- readl(info->screen_base + LCD_DATA);
- cpld_wait(info);
- return readl(info->screen_base + CPLD_DATA) & 0xff;
-}
-#endif
static int lcd_busy_wait(struct fb_info *info)
{