diff options
author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2020-07-05 19:16:21 +0300 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2020-07-06 01:25:58 +0300 |
commit | 3f2628d62dec9505d5f19044e5f0401989a6b796 (patch) | |
tree | f371cec2198dc6df3c41686e04445a2771aa5592 /drivers | |
parent | e1f04670440442b6218b391b5f822819fb3b8c6f (diff) | |
download | linux-3f2628d62dec9505d5f19044e5f0401989a6b796.tar.xz |
net: dsa: felix: clarify the intention of writes to MII_BMCR
The driver appears to write to BMCR_SPEED and BMCR_DUPLEX, fields which
are read-only, since they are actually configured through the
vendor-specific IF_MODE (0x14) register.
But the reason we're writing back the read-only values of MII_BMCR is to
alter these writable fields:
BMCR_RESET
BMCR_LOOPBACK
BMCR_ANENABLE
BMCR_PDOWN
BMCR_ISOLATE
BMCR_ANRESTART
In particular, the only field which is really relevant to this driver is
BMCR_ANENABLE. Clarify that intention by spelling it out, using
phy_set_bits and phy_clear_bits.
The driver also made a few writes to BMCR_RESET and BMCR_ANRESTART which
are unnecessary and may temporarily disrupt the link to the PHY. Remove
them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/dsa/ocelot/felix_vsc9959.c | 11 |
1 files changed, 3 insertions, 8 deletions
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c index 2067776773f7..9f4c8343652f 100644 --- a/drivers/net/dsa/ocelot/felix_vsc9959.c +++ b/drivers/net/dsa/ocelot/felix_vsc9959.c @@ -815,7 +815,7 @@ static void vsc9959_pcs_init_sgmii(struct phy_device *pcs, phy_write(pcs, ENETC_PCS_LINK_TIMER2, ENETC_PCS_LINK_TIMER2_VAL); - phy_write(pcs, MII_BMCR, BMCR_ANRESTART | BMCR_ANENABLE); + phy_set_bits(pcs, MII_BMCR, BMCR_ANENABLE); } else { int speed; @@ -845,10 +845,7 @@ static void vsc9959_pcs_init_sgmii(struct phy_device *pcs, ENETC_PCS_IF_MODE_SGMII_EN | ENETC_PCS_IF_MODE_SGMII_SPEED(speed)); - /* Yes, not a mistake: speed is given by IF_MODE. */ - phy_write(pcs, MII_BMCR, BMCR_RESET | - BMCR_SPEED1000 | - BMCR_FULLDPLX); + phy_clear_bits(pcs, MII_BMCR, BMCR_ANENABLE); } } @@ -882,9 +879,7 @@ static void vsc9959_pcs_init_2500basex(struct phy_device *pcs, ENETC_PCS_IF_MODE_SGMII_EN | ENETC_PCS_IF_MODE_SGMII_SPEED(ENETC_PCS_SPEED_2500)); - phy_write(pcs, MII_BMCR, BMCR_SPEED1000 | - BMCR_FULLDPLX | - BMCR_RESET); + phy_clear_bits(pcs, MII_BMCR, BMCR_ANENABLE); } static void vsc9959_pcs_init_usxgmii(struct phy_device *pcs, |