diff options
author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2022-08-18 17:32:50 +0300 |
---|---|---|
committer | Jakub Kicinski <kuba@kernel.org> | 2022-08-23 03:50:40 +0300 |
commit | 5fbb08eb7f945c7e8896ea39f03143ce66dfa4c7 (patch) | |
tree | 70571147275739a1e215b9de0f396beee2418a62 /drivers | |
parent | f1e941dbf80a9b8bab0bffbc4cbe41cc7f4c6fb6 (diff) | |
download | linux-5fbb08eb7f945c7e8896ea39f03143ce66dfa4c7.tar.xz |
net: dsa: microchip: keep compatibility with device tree blobs with no phy-mode
DSA has multiple ways of specifying a MAC connection to an internal PHY.
One requires a DT description like this:
port@0 {
reg = <0>;
phy-handle = <&internal_phy>;
phy-mode = "internal";
};
(which is IMO the recommended approach, as it is the clearest
description)
but it is also possible to leave the specification as just:
port@0 {
reg = <0>;
}
and if the driver implements ds->ops->phy_read and ds->ops->phy_write,
the DSA framework "knows" it should create a ds->slave_mii_bus, and it
should connect to a non-OF-based internal PHY on this MDIO bus, at an
MDIO address equal to the port address.
There is also an intermediary way of describing things:
port@0 {
reg = <0>;
phy-handle = <&internal_phy>;
};
In case 2, DSA calls phylink_connect_phy() and in case 3, it calls
phylink_of_phy_connect(). In both cases, phylink_create() has been
called with a phy_interface_t of PHY_INTERFACE_MODE_NA, and in both
cases, PHY_INTERFACE_MODE_NA is translated into phy->interface.
It is important to note that phy_device_create() initializes
dev->interface = PHY_INTERFACE_MODE_GMII, and so, when we use
phylink_create(PHY_INTERFACE_MODE_NA), no one will override this, and we
will end up with a PHY_INTERFACE_MODE_GMII interface inherited from the
PHY.
All this means that in order to maintain compatibility with device tree
blobs where the phy-mode property is missing, we need to allow the
"gmii" phy-mode and treat it as "internal".
Fixes: 2c709e0bdad4 ("net: dsa: microchip: ksz8795: add phylink support")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216320
Reported-by: Craig McQueen <craig@mcqueen.id.au>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Tested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/r/20220818143250.2797111-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/dsa/microchip/ksz_common.c | 8 |
1 files changed, 7 insertions, 1 deletions
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index ed7d137cba99..7461272a6d41 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -803,9 +803,15 @@ static void ksz_phylink_get_caps(struct dsa_switch *ds, int port, if (dev->info->supports_rgmii[port]) phy_interface_set_rgmii(config->supported_interfaces); - if (dev->info->internal_phy[port]) + if (dev->info->internal_phy[port]) { __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); + /* Compatibility for phylib's default interface type when the + * phy-mode property is absent + */ + __set_bit(PHY_INTERFACE_MODE_GMII, + config->supported_interfaces); + } if (dev->dev_ops->get_caps) dev->dev_ops->get_caps(dev, port, config); |