summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@g5.osdl.org>2006-01-09 21:03:44 +0300
committerLinus Torvalds <torvalds@g5.osdl.org>2006-01-09 21:03:44 +0300
commit6150c32589d1976ca8a5c987df951088c05a7542 (patch)
tree94073696576323ff966e365d8c47b8ecd8372f97 /drivers
parent44637a12f80b80157d9c1bc5b7d6ef09c9e05713 (diff)
parentbe42d5fa3772241b8ecebd443f1fb36247959c54 (diff)
downloadlinux-6150c32589d1976ca8a5c987df951088c05a7542.tar.xz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge
Diffstat (limited to 'drivers')
-rw-r--r--drivers/block/swim3.c38
-rw-r--r--drivers/char/watchdog/mpc8xx_wdt.c20
-rw-r--r--drivers/i2c/busses/Kconfig24
-rw-r--r--drivers/i2c/busses/Makefile3
-rw-r--r--drivers/i2c/busses/i2c-keywest.c751
-rw-r--r--drivers/i2c/busses/i2c-keywest.h108
-rw-r--r--drivers/i2c/busses/i2c-pmac-smu.c315
-rw-r--r--drivers/i2c/busses/i2c-powermac.c290
-rw-r--r--drivers/ide/ppc/pmac.c6
-rw-r--r--drivers/macintosh/Kconfig10
-rw-r--r--drivers/macintosh/macio_asic.c254
-rw-r--r--drivers/macintosh/mediabay.c8
-rw-r--r--drivers/macintosh/smu.c50
-rw-r--r--drivers/macintosh/via-cuda.c52
-rw-r--r--drivers/macintosh/via-pmu.c364
-rw-r--r--drivers/macintosh/windfarm_lm75_sensor.c50
-rw-r--r--drivers/scsi/mac53c94.c22
-rw-r--r--drivers/scsi/mesh.c3
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c2
-rw-r--r--drivers/serial/pmac_zilog.c15
-rw-r--r--drivers/video/controlfb.c114
-rw-r--r--drivers/video/offb.c122
-rw-r--r--drivers/video/platinumfb.c98
-rw-r--r--drivers/video/platinumfb.h4
-rw-r--r--drivers/video/valkyriefb.c12
25 files changed, 824 insertions, 1911 deletions
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index af7cb2bfd670..01f042f6f1c4 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -1083,23 +1083,33 @@ static int swim3_add_device(struct device_node *swim)
{
struct device_node *mediabay;
struct floppy_state *fs = &floppy_states[floppy_count];
+ struct resource res_reg, res_dma;
- if (swim->n_addrs < 2)
- {
- printk(KERN_INFO "swim3: expecting 2 addrs (n_addrs:%d, n_intrs:%d)\n",
- swim->n_addrs, swim->n_intrs);
+ if (of_address_to_resource(swim, 0, &res_reg) ||
+ of_address_to_resource(swim, 1, &res_dma)) {
+ printk(KERN_ERR "swim3: Can't get addresses\n");
return -EINVAL;
}
-
- if (swim->n_intrs < 2)
- {
- printk(KERN_INFO "swim3: expecting 2 intrs (n_addrs:%d, n_intrs:%d)\n",
- swim->n_addrs, swim->n_intrs);
+ if (request_mem_region(res_reg.start, res_reg.end - res_reg.start + 1,
+ " (reg)") == NULL) {
+ printk(KERN_ERR "swim3: Can't request register space\n");
+ return -EINVAL;
+ }
+ if (request_mem_region(res_dma.start, res_dma.end - res_dma.start + 1,
+ " (dma)") == NULL) {
+ release_mem_region(res_reg.start,
+ res_reg.end - res_reg.start + 1);
+ printk(KERN_ERR "swim3: Can't request DMA space\n");
return -EINVAL;
}
- if (!request_OF_resource(swim, 0, NULL)) {
- printk(KERN_INFO "swim3: can't request IO resource !\n");
+ if (swim->n_intrs < 2) {
+ printk(KERN_INFO "swim3: expecting 2 intrs (n_intrs:%d)\n",
+ swim->n_intrs);
+ release_mem_region(res_reg.start,
+ res_reg.end - res_reg.start + 1);
+ release_mem_region(res_dma.start,
+ res_dma.end - res_dma.start + 1);
return -EINVAL;
}
@@ -1110,10 +1120,8 @@ static int swim3_add_device(struct device_node *swim)
memset(fs, 0, sizeof(*fs));
spin_lock_init(&fs->lock);
fs->state = idle;
- fs->swim3 = (struct swim3 __iomem *)
- ioremap(swim->addrs[0].address, 0x200);
- fs->dma = (struct dbdma_regs __iomem *)
- ioremap(swim->addrs[1].address, 0x200);
+ fs->swim3 = (struct swim3 __iomem *)ioremap(res_reg.start, 0x200);
+ fs->dma = (struct dbdma_regs __iomem *)ioremap(res_dma.start, 0x200);
fs->swim3_intr = swim->intrs[0].line;
fs->dma_intr = swim->intrs[1].line;
fs->cur_cyl = -1;
diff --git a/drivers/char/watchdog/mpc8xx_wdt.c b/drivers/char/watchdog/mpc8xx_wdt.c
index 56d62ba7c6ce..b2fc71e20850 100644
--- a/drivers/char/watchdog/mpc8xx_wdt.c
+++ b/drivers/char/watchdog/mpc8xx_wdt.c
@@ -18,6 +18,7 @@
#include <linux/watchdog.h>
#include <asm/8xx_immap.h>
#include <asm/uaccess.h>
+#include <asm/io.h>
#include <syslib/m8xx_wdt.h>
static unsigned long wdt_opened;
@@ -25,18 +26,26 @@ static int wdt_status;
static void mpc8xx_wdt_handler_disable(void)
{
- volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
+ volatile uint __iomem *piscr;
+ piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr;
- imap->im_sit.sit_piscr &= ~(PISCR_PIE | PISCR_PTE);
+ if (!m8xx_has_internal_rtc)
+ m8xx_wdt_stop_timer();
+ else
+ out_be32(piscr, in_be32(piscr) & ~(PISCR_PIE | PISCR_PTE));
printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler deactivated\n");
}
static void mpc8xx_wdt_handler_enable(void)
{
- volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
+ volatile uint __iomem *piscr;
+ piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr;
- imap->im_sit.sit_piscr |= PISCR_PIE | PISCR_PTE;
+ if (!m8xx_has_internal_rtc)
+ m8xx_wdt_install_timer();
+ else
+ out_be32(piscr, in_be32(piscr) | PISCR_PIE | PISCR_PTE);
printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler activated\n");
}
@@ -68,9 +77,6 @@ static int mpc8xx_wdt_release(struct inode *inode, struct file *file)
static ssize_t mpc8xx_wdt_write(struct file *file, const char *data, size_t len,
loff_t * ppos)
{
- if (ppos != &file->f_pos)
- return -ESPIPE;
-
if (len)
m8xx_wdt_reset();
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 4010fe92e72b..08d5b8fed2dc 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -236,27 +236,17 @@ config I2C_IXP2000
This support is also available as a module. If so, the module
will be called i2c-ixp2000.
-config I2C_KEYWEST
- tristate "Powermac Keywest I2C interface"
+config I2C_POWERMAC
+ tristate "Powermac I2C interface"
depends on I2C && PPC_PMAC
+ default y
help
- This supports the use of the I2C interface in the combo-I/O
- chip on recent Apple machines. Say Y if you have such a machine.
-
- This support is also available as a module. If so, the module
- will be called i2c-keywest.
-
-config I2C_PMAC_SMU
- tristate "Powermac SMU I2C interface"
- depends on I2C && PMAC_SMU
- help
- This supports the use of the I2C interface in the SMU
- chip on recent Apple machines like the iMac G5. It is used
- among others by the thermal control driver for those machines.
- Say Y if you have such a machine.
+ This exposes the various PowerMac i2c interfaces to the linux i2c
+ layer and to userland. It is used by various drivers on the powemac
+ platform, thus should generally be enabled.
This support is also available as a module. If so, the module
- will be called i2c-pmac-smu.
+ will be called i2c-powermac.
config I2C_MPC
tristate "MPC107/824x/85xx/52xx"
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index f1df00f66c6c..b44831dff683 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -19,8 +19,7 @@ obj-$(CONFIG_I2C_ISA) += i2c-isa.o
obj-$(CONFIG_I2C_ITE) += i2c-ite.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o
-obj-$(CONFIG_I2C_KEYWEST) += i2c-keywest.o
-obj-$(CONFIG_I2C_PMAC_SMU) += i2c-pmac-smu.o
+obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c
deleted file mode 100644
index d61f748278fc..000000000000
--- a/drivers/i2c/busses/i2c-keywest.c
+++ /dev/null
@@ -1,751 +0,0 @@
-/*
- i2c Support for Apple Keywest I2C Bus Controller
-
- Copyright (c) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- Original work by
-
- Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Changes:
-
- 2001/12/13 BenH New implementation
- 2001/12/15 BenH Add support for "byte" and "quick"
- transfers. Add i2c_xfer routine.
- 2003/09/21 BenH Rework state machine with Paulus help
- 2004/01/21 BenH Merge in Greg KH changes, polled mode is back
- 2004/02/05 BenH Merge 64 bits fixes from the g5 ppc64 tree
-
- My understanding of the various modes supported by keywest are:
-
- - Dumb mode : not implemented, probably direct tweaking of lines
- - Standard mode : simple i2c transaction of type
- S Addr R/W A Data A Data ... T
- - Standard sub mode : combined 8 bit subaddr write with data read
- S Addr R/W A SubAddr A Data A Data ... T
- - Combined mode : Subaddress and Data sequences appended with no stop
- S Addr R/W A SubAddr S Addr R/W A Data A Data ... T
-
- Currently, this driver uses only Standard mode for i2c xfer, and
- smbus byte & quick transfers ; and uses StandardSub mode for
- other smbus transfers instead of combined as we need that for the
- sound driver to be happy
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/pmac_low_i2c.h>
-
-#include "i2c-keywest.h"
-
-#undef POLLED_MODE
-
-/* Some debug macros */
-#define WRONG_STATE(name) do {\
- pr_debug("KW: wrong state. Got %s, state: %s (isr: %02x)\n", \
- name, __kw_state_names[iface->state], isr); \
- } while(0)
-
-#ifdef DEBUG
-static const char *__kw_state_names[] = {
- "state_idle",
- "state_addr",
- "state_read",
- "state_write",
- "state_stop",
- "state_dead"
-};
-#endif /* DEBUG */
-
-MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("I2C driver for Apple's Keywest");
-MODULE_LICENSE("GPL");
-
-#ifdef POLLED_MODE
-/* Don't schedule, the g5 fan controller is too
- * timing sensitive
- */
-static u8
-wait_interrupt(struct keywest_iface* iface)
-{
- int i;
- u8 isr;
-
- for (i = 0; i < 200000; i++) {
- isr = read_reg(reg_isr) & KW_I2C_IRQ_MASK;
- if (isr != 0)
- return isr;
- udelay(10);
- }
- return isr;
-}
-#endif /* POLLED_MODE */
-
-static void
-do_stop(struct keywest_iface* iface, int result)
-{
- write_reg(reg_control, KW_I2C_CTL_STOP);
- iface->state = state_stop;
- iface->result = result;
-}
-
-/* Main state machine for standard & standard sub mode */
-static void
-handle_interrupt(struct keywest_iface *iface, u8 isr)
-{
- int ack;
-
- if (isr == 0) {
- if (iface->state != state_stop) {
- pr_debug("KW: Timeout !\n");
- do_stop(iface, -EIO);
- }
- if (iface->state == state_stop) {
- ack = read_reg(reg_status);
- if (!(ack & KW_I2C_STAT_BUSY)) {
- iface->state = state_idle;
- write_reg(reg_ier, 0x00);
-#ifndef POLLED_MODE
- complete(&iface->complete);
-#endif /* POLLED_MODE */
- }
- }
- return;
- }
-
- if (isr & KW_I2C_IRQ_ADDR) {
- ack = read_reg(reg_status);
- if (iface->state != state_addr) {
- write_reg(reg_isr, KW_I2C_IRQ_ADDR);
- WRONG_STATE("KW_I2C_IRQ_ADDR");
- do_stop(iface, -EIO);
- return;
- }
- if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
- iface->state = state_stop;
- iface->result = -ENODEV;
- pr_debug("KW: NAK on address\n");
- } else {
- /* Handle rw "quick" mode */
- if (iface->datalen == 0) {
- do_stop(iface, 0);
- } else if (iface->read_write == I2C_SMBUS_READ) {
- iface->state = state_read;
- if (iface->datalen > 1)
- write_reg(reg_control, KW_I2C_CTL_AAK);
- } else {
- iface->state = state_write;
- write_reg(reg_data, *(iface->data++));
- iface->datalen--;
- }
- }
- write_reg(reg_isr, KW_I2C_IRQ_ADDR);
- }
-
- if (isr & KW_I2C_IRQ_DATA) {
- if (iface->state == state_read) {
- *(iface->data++) = read_reg(reg_data);
- write_reg(reg_isr, KW_I2C_IRQ_DATA);
- iface->datalen--;
- if (iface->datalen == 0)
- iface->state = state_stop;
- else if (iface->datalen == 1)
- write_reg(reg_control, 0);
- } else if (iface->state == state_write) {
- /* Check ack status */
- ack = read_reg(reg_status);
- if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
- pr_debug("KW: nack on data write (%x): %x\n",
- iface->data[-1], ack);
- do_stop(iface, -EIO);
- } else if (iface->datalen) {
- write_reg(reg_data, *(iface->data++));
- iface->datalen--;
- } else {
- write_reg(reg_control, KW_I2C_CTL_STOP);
- iface->state = state_stop;
- iface->result = 0;
- }
- write_reg(reg_isr, KW_I2C_IRQ_DATA);
- } else {
- write_reg(reg_isr, KW_I2C_IRQ_DATA);
- WRONG_STATE("KW_I2C_IRQ_DATA");
- if (iface->state != state_stop)
- do_stop(iface, -EIO);
- }
- }
-
- if (isr & KW_I2C_IRQ_STOP) {
- write_reg(reg_isr, KW_I2C_IRQ_STOP);
- if (iface->state != state_stop) {
- WRONG_STATE("KW_I2C_IRQ_STOP");
- iface->result = -EIO;
- }
- iface->state = state_idle;
- write_reg(reg_ier, 0x00);
-#ifndef POLLED_MODE
- complete(&iface->complete);
-#endif /* POLLED_MODE */
- }
-
- if (isr & KW_I2C_IRQ_START)
- write_reg(reg_isr, KW_I2C_IRQ_START);
-}
-
-#ifndef POLLED_MODE
-
-/* Interrupt handler */
-static irqreturn_t
-keywest_irq(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct keywest_iface *iface = (struct keywest_iface *)dev_id;
- unsigned long flags;
-
- spin_lock_irqsave(&iface->lock, flags);
- del_timer(&iface->timeout_timer);
- handle_interrupt(iface, read_reg(reg_isr));
- if (iface->state != state_idle) {
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
- }
- spin_unlock_irqrestore(&iface->lock, flags);
- return IRQ_HANDLED;
-}
-
-static void
-keywest_timeout(unsigned long data)
-{
- struct keywest_iface *iface = (struct keywest_iface *)data;
- unsigned long flags;
-
- pr_debug("timeout !\n");
- spin_lock_irqsave(&iface->lock, flags);
- handle_interrupt(iface, read_reg(reg_isr));
- if (iface->state != state_idle) {
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
- }
- spin_unlock_irqrestore(&iface->lock, flags);
-}
-
-#endif /* POLLED_MODE */
-
-/*
- * SMBUS-type transfer entrypoint
- */
-static s32
-keywest_smbus_xfer( struct i2c_adapter* adap,
- u16 addr,
- unsigned short flags,
- char read_write,
- u8 command,
- int size,
- union i2c_smbus_data* data)
-{
- struct keywest_chan* chan = i2c_get_adapdata(adap);
- struct keywest_iface* iface = chan->iface;
- int len;
- u8* buffer;
- u16 cur_word;
- int rc = 0;
-
- if (iface->state == state_dead)
- return -ENXIO;
-
- /* Prepare datas & select mode */
- iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
- switch (size) {
- case I2C_SMBUS_QUICK:
- len = 0;
- buffer = NULL;
- iface->cur_mode |= KW_I2C_MODE_STANDARD;
- break;
- case I2C_SMBUS_BYTE:
- len = 1;
- buffer = &data->byte;
- iface->cur_mode |= KW_I2C_MODE_STANDARD;
- break;
- case I2C_SMBUS_BYTE_DATA:
- len = 1;
- buffer = &data->byte;
- iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
- break;
- case I2C_SMBUS_WORD_DATA:
- len = 2;
- cur_word = cpu_to_le16(data->word);
- buffer = (u8 *)&cur_word;
- iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
- break;
- case I2C_SMBUS_BLOCK_DATA:
- len = data->block[0];
- buffer = &data->block[1];
- iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
- break;
- default:
- return -1;
- }
-
- /* Turn a standardsub read into a combined mode access */
- if (read_write == I2C_SMBUS_READ
- && (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB) {
- iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
- iface->cur_mode |= KW_I2C_MODE_COMBINED;
- }
-
- /* Original driver had this limitation */
- if (len > 32)
- len = 32;
-
- if (pmac_low_i2c_lock(iface->node))
- return -ENXIO;
-
- pr_debug("chan: %d, addr: 0x%x, transfer len: %d, read: %d\n",
- chan->chan_no, addr, len, read_write == I2C_SMBUS_READ);
-
- iface->data = buffer;
- iface->datalen = len;
- iface->state = state_addr;
- iface->result = 0;
- iface->read_write = read_write;
-
- /* Setup channel & clear pending irqs */
- write_reg(reg_isr, read_reg(reg_isr));
- write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4));
- write_reg(reg_status, 0);
-
- /* Set up address and r/w bit */
- write_reg(reg_addr,
- (addr << 1) | ((read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
-
- /* Set up the sub address */
- if ((iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB
- || (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED)
- write_reg(reg_subaddr, command);
-
-#ifndef POLLED_MODE
- /* Arm timeout */
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
-#endif
-
- /* Start sending address & enable interrupt*/
- write_reg(reg_control, KW_I2C_CTL_XADDR);
- write_reg(reg_ier, KW_I2C_IRQ_MASK);
-
-#ifdef POLLED_MODE
- pr_debug("using polled mode...\n");
- /* State machine, to turn into an interrupt handler */
- while(iface->state != state_idle) {
- unsigned long flags;
-
- u8 isr = wait_interrupt(iface);
- spin_lock_irqsave(&iface->lock, flags);
- handle_interrupt(iface, isr);
- spin_unlock_irqrestore(&iface->lock, flags);
- }
-#else /* POLLED_MODE */
- pr_debug("using interrupt mode...\n");
- wait_for_completion(&iface->complete);
-#endif /* POLLED_MODE */
-
- rc = iface->result;
- pr_debug("transfer done, result: %d\n", rc);
-
- if (rc == 0 && size == I2C_SMBUS_WORD_DATA && read_write == I2C_SMBUS_READ)
- data->word = le16_to_cpu(cur_word);
-
- /* Release sem */
- pmac_low_i2c_unlock(iface->node);
-
- return rc;
-}
-
-/*
- * Generic i2c master transfer entrypoint
- */
-static int
-keywest_xfer( struct i2c_adapter *adap,
- struct i2c_msg *msgs,
- int num)
-{
- struct keywest_chan* chan = i2c_get_adapdata(adap);
- struct keywest_iface* iface = chan->iface;
- struct i2c_msg *pmsg;
- int i, completed;
- int rc = 0;
-
- if (iface->state == state_dead)
- return -ENXIO;
-
- if (pmac_low_i2c_lock(iface->node))
- return -ENXIO;
-
- /* Set adapter to standard mode */
- iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
- iface->cur_mode |= KW_I2C_MODE_STANDARD;
-
- completed = 0;
- for (i = 0; rc >= 0 && i < num;) {
- u8 addr;
-
- pmsg = &msgs[i++];
- addr = pmsg->addr;
- if (pmsg->flags & I2C_M_TEN) {
- printk(KERN_ERR "i2c-keywest: 10 bits addr not supported !\n");
- rc = -EINVAL;
- break;
- }
- pr_debug("xfer: chan: %d, doing %s %d bytes to 0x%02x - %d of %d messages\n",
- chan->chan_no,
- pmsg->flags & I2C_M_RD ? "read" : "write",
- pmsg->len, addr, i, num);
-
- /* Setup channel & clear pending irqs */
- write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4));
- write_reg(reg_isr, read_reg(reg_isr));
- write_reg(reg_status, 0);
-
- iface->data = pmsg->buf;
- iface->datalen = pmsg->len;
- iface->state = state_addr;
- iface->result = 0;
- if (pmsg->flags & I2C_M_RD)
- iface->read_write = I2C_SMBUS_READ;
- else
- iface->read_write = I2C_SMBUS_WRITE;
-
- /* Set up address and r/w bit */
- if (pmsg->flags & I2C_M_REV_DIR_ADDR)
- addr ^= 1;
- write_reg(reg_addr,
- (addr << 1) |
- ((iface->read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
-
-#ifndef POLLED_MODE
- /* Arm timeout */
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
-#endif
-
- /* Start sending address & enable interrupt*/
- write_reg(reg_ier, KW_I2C_IRQ_MASK);
- write_reg(reg_control, KW_I2C_CTL_XADDR);
-
-#ifdef POLLED_MODE
- pr_debug("using polled mode...\n");
- /* State machine, to turn into an interrupt handler */
- while(iface->state != state_idle) {
- u8 isr = wait_interrupt(iface);
- handle_interrupt(iface, isr);
- }
-#else /* POLLED_MODE */
- pr_debug("using interrupt mode...\n");
- wait_for_completion(&iface->complete);
-#endif /* POLLED_MODE */
-
- rc = iface->result;
- if (rc == 0)
- completed++;
- pr_debug("transfer done, result: %d\n", rc);
- }
-
- /* Release sem */
- pmac_low_i2c_unlock(iface->node);
-
- return completed;
-}
-
-static u32
-keywest_func(struct i2c_adapter * adapter)
-{
- return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA;
-}
-
-/* For now, we only handle combined mode (smbus) */
-static struct i2c_algorithm keywest_algorithm = {
- .smbus_xfer = keywest_smbus_xfer,
- .master_xfer = keywest_xfer,
- .functionality = keywest_func,
-};
-
-
-static int
-create_iface(struct device_node *np, struct device *dev)
-{
- unsigned long steps;
- unsigned bsteps, tsize, i, nchan, addroffset;
- struct keywest_iface* iface;
- u32 *psteps, *prate;
- int rc;
-
- if (np->n_intrs < 1 || np->n_addrs < 1) {
- printk(KERN_ERR "%s: Missing interrupt or address !\n",
- np->full_name);
- return -ENODEV;
- }
- if (pmac_low_i2c_lock(np))
- return -ENODEV;
-
- psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
- steps = psteps ? (*psteps) : 0x10;
-
- /* Hrm... maybe we can be smarter here */
- for (bsteps = 0; (steps & 0x01) == 0; bsteps++)
- steps >>= 1;
-
- if (np->parent->name[0] == 'u') {
- nchan = 2;
- addroffset = 3;
- } else {
- addroffset = 0;
- nchan = 1;
- }
-
- tsize = sizeof(struct keywest_iface) +
- (sizeof(struct keywest_chan) + 4) * nchan;
- iface = kzalloc(tsize, GFP_KERNEL);
- if (iface == NULL) {
- printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n");
- pmac_low_i2c_unlock(np);
- return -ENOMEM;
- }
- spin_lock_init(&iface->lock);
- init_completion(&iface->complete);
- iface->node = of_node_get(np);
- iface->bsteps = bsteps;
- iface->chan_count = nchan;
- iface->state = state_idle;
- iface->irq = np->intrs[0].line;
- iface->channels = (struct keywest_chan *)
- (((unsigned long)(iface + 1) + 3UL) & ~3UL);
- iface->base = ioremap(np->addrs[0].address + addroffset,
- np->addrs[0].size);
- if (!iface->base) {
- printk(KERN_ERR "i2c-keywest: can't map inteface !\n");
- kfree(iface);
- pmac_low_i2c_unlock(np);
- return -ENOMEM;
- }
-
-#ifndef POLLED_MODE
- init_timer(&iface->timeout_timer);
- iface->timeout_timer.function = keywest_timeout;
- iface->timeout_timer.data = (unsigned long)iface;
-#endif
-
- /* Select interface rate */
- iface->cur_mode = KW_I2C_MODE_100KHZ;
- prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
- if (prate) switch(*prate) {
- case 100:
- iface->cur_mode = KW_I2C_MODE_100KHZ;
- break;
- case 50:
- iface->cur_mode = KW_I2C_MODE_50KHZ;
- break;
- case 25:
- iface->cur_mode = KW_I2C_MODE_25KHZ;
- break;
- default:
- printk(KERN_WARNING "i2c-keywest: unknown rate %ldKhz, using 100KHz\n",
- (long)*prate);
- }
-
- /* Select standard mode by default */
- iface->cur_mode |= KW_I2C_MODE_STANDARD;
-
- /* Write mode */
- write_reg(reg_mode, iface->cur_mode);
-
- /* Switch interrupts off & clear them*/
- write_reg(reg_ier, 0x00);
- write_reg(reg_isr, KW_I2C_IRQ_MASK);
-
-#ifndef POLLED_MODE
- /* Request chip interrupt */
- rc = request_irq(iface->irq, keywest_irq, SA_INTERRUPT, "keywest i2c", iface);
- if (rc) {
- printk(KERN_ERR "i2c-keywest: can't get IRQ %d !\n", iface->irq);
- iounmap(iface->base);
- kfree(iface);
- pmac_low_i2c_unlock(np);
- return -ENODEV;
- }
-#endif /* POLLED_MODE */
-
- pmac_low_i2c_unlock(np);
- dev_set_drvdata(dev, iface);
-
- for (i=0; i<nchan; i++) {
- struct keywest_chan* chan = &iface->channels[i];
-
- sprintf(chan->adapter.name, "%s %d", np->parent->name, i);
- chan->iface = iface;
- chan->chan_no = i;
- chan->adapter.algo = &keywest_algorithm;
- chan->adapter.algo_data = NULL;
- chan->adapter.client_register = NULL;
- chan->adapter.client_unregister = NULL;
- i2c_set_adapdata(&chan->adapter, chan);
- chan->adapter.dev.parent = dev;
-
- rc = i2c_add_adapter(&chan->adapter);
- if (rc) {
- printk("i2c-keywest.c: Adapter %s registration failed\n",
- chan->adapter.name);
- i2c_set_adapdata(&chan->adapter, NULL);
- }
- }
-
- printk(KERN_INFO "Found KeyWest i2c on \"%s\", %d channel%s, stepping: %d bits\n",
- np->parent->name, nchan, nchan > 1 ? "s" : "", bsteps);
-
- return 0;
-}
-
-static int
-dispose_iface(struct device *dev)
-{
- struct keywest_iface *iface = dev_get_drvdata(dev);
- int i, rc;
-
- /* Make sure we stop all activity */
- if (pmac_low_i2c_lock(iface->node))
- return -ENODEV;
-
-#ifndef POLLED_MODE
- spin_lock_irq(&iface->lock);
- while (iface->state != state_idle) {
- spin_unlock_irq(&iface->lock);
- msleep(100);
- spin_lock_irq(&iface->lock);
- }
-#endif /* POLLED_MODE */
- iface->state = state_dead;
-#ifndef POLLED_MODE
- spin_unlock_irq(&iface->lock);
- free_irq(iface->irq, iface);
-#endif /* POLLED_MODE */
-
- pmac_low_i2c_unlock(iface->node);
-
- /* Release all channels */
- for (i=0; i<iface->chan_count; i++) {
- struct keywest_chan* chan = &iface->channels[i];
- if (i2c_get_adapdata(&chan->adapter) == NULL)
- continue;
- rc = i2c_del_adapter(&chan->adapter);
- i2c_set_adapdata(&chan->adapter, NULL);
- /* We aren't that prepared to deal with this... */
- if (rc)
- printk("i2c-keywest.c: i2c_del_adapter failed, that's bad !\n");
- }
- iounmap(iface->base);
- dev_set_drvdata(dev, NULL);
- of_node_put(iface->node);
- kfree(iface);
-
- return 0;
-}
-
-static int
-create_iface_macio(struct macio_dev* dev, const struct of_device_id *match)
-{
- return create_iface(dev->ofdev.node, &dev->ofdev.dev);
-}
-
-static int
-dispose_iface_macio(struct macio_dev* dev)
-{
- return dispose_iface(&dev->ofdev.dev);
-}
-
-static int
-create_iface_of_platform(struct of_device* dev, const struct of_device_id *match)
-{
- return create_iface(dev->node, &dev->dev);
-}
-
-static int
-dispose_iface_of_platform(struct of_device* dev)
-{
- return dispose_iface(&dev->dev);
-}
-
-static struct of_device_id i2c_keywest_match[] =
-{
- {
- .type = "i2c",
- .compatible = "keywest"
- },
- {},
-};
-
-static struct macio_driver i2c_keywest_macio_driver =
-{
- .owner = THIS_MODULE,
- .name = "i2c-keywest",
- .match_table = i2c_keywest_match,
- .probe = create_iface_macio,
- .remove = dispose_iface_macio
-};
-
-static struct of_platform_driver i2c_keywest_of_platform_driver =
-{
- .owner = THIS_MODULE,
- .name = "i2c-keywest",
- .match_table = i2c_keywest_match,
- .probe = create_iface_of_platform,
- .remove = dispose_iface_of_platform
-};
-
-static int __init
-i2c_keywest_init(void)
-{
- of_register_driver(&i2c_keywest_of_platform_driver);
- macio_register_driver(&i2c_keywest_macio_driver);
-
- return 0;
-}
-
-static void __exit
-i2c_keywest_cleanup(void)
-{
- of_unregister_driver(&i2c_keywest_of_platform_driver);
- macio_unregister_driver(&i2c_keywest_macio_driver);
-}
-
-module_init(i2c_keywest_init);
-module_exit(i2c_keywest_cleanup);
diff --git a/drivers/i2c/busses/i2c-keywest.h b/drivers/i2c/busses/i2c-keywest.h
deleted file mode 100644
index c5022e1ca6ff..000000000000
--- a/drivers/i2c/busses/i2c-keywest.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef __I2C_KEYWEST_H__
-#define __I2C_KEYWEST_H__
-
-/* The Tumbler audio equalizer can be really slow sometimes */
-#define POLL_TIMEOUT (2*HZ)
-
-/* Register indices */
-typedef enum {
- reg_mode = 0,
- reg_control,
- reg_status,
- reg_isr,
- reg_ier,
- reg_addr,
- reg_subaddr,
- reg_data
-} reg_t;
-
-
-/* Mode register */
-#define KW_I2C_MODE_100KHZ 0x00
-#define KW_I2C_MODE_50KHZ 0x01
-#define KW_I2C_MODE_25KHZ 0x02
-#define KW_I2C_MODE_DUMB 0x00
-#define KW_I2C_MODE_STANDARD 0x04
-#define KW_I2C_MODE_STANDARDSUB 0x08
-#define KW_I2C_MODE_COMBINED 0x0C
-#define KW_I2C_MODE_MODE_MASK 0x0C
-#define KW_I2C_MODE_CHAN_MASK 0xF0
-
-/* Control register */
-#define KW_I2C_CTL_AAK 0x01
-#define KW_I2C_CTL_XADDR 0x02
-#define KW_I2C_CTL_STOP 0x04
-#define KW_I2C_CTL_START 0x08
-
-/* Status register */
-#define KW_I2C_STAT_BUSY 0x01
-#define KW_I2C_STAT_LAST_AAK 0x02
-#define KW_I2C_STAT_LAST_RW 0x04
-#define KW_I2C_STAT_SDA 0x08
-#define KW_I2C_STAT_SCL 0x10
-
-/* IER & ISR registers */
-#define KW_I2C_IRQ_DATA 0x01
-#define KW_I2C_IRQ_ADDR 0x02
-#define KW_I2C_IRQ_STOP 0x04
-#define KW_I2C_IRQ_START 0x08
-#define KW_I2C_IRQ_MASK 0x0F
-
-/* Physical interface */
-struct keywest_iface
-{
- struct device_node *node;
- void __iomem * base;
- unsigned bsteps;
- int irq;
- spinlock_t lock;
- struct keywest_chan *channels;
- unsigned chan_count;
- u8 cur_mode;
- char read_write;
- u8 *data;
- unsigned datalen;
- int state;
- int result;
- struct timer_list timeout_timer;
- struct completion complete;
-};
-
-enum {
- state_idle,
- state_addr,
- state_read,
- state_write,
- state_stop,
- state_dead
-};
-
-/* Channel on an interface */
-struct keywest_chan
-{
- struct i2c_adapter adapter;
- struct keywest_iface* iface;
- unsigned chan_no;
-};
-
-/* Register access */
-
-static inline u8 __read_reg(struct keywest_iface *iface, reg_t reg)
-{
- return in_8(iface->base
- + (((unsigned)reg) << iface->bsteps));
-}
-
-static inline void __write_reg(struct keywest_iface *iface, reg_t reg, u8 val)
-{
- out_8(iface->base
- + (((unsigned)reg) << iface->bsteps), val);
- (void)__read_reg(iface, reg_subaddr);
-}
-
-#define write_reg(reg, val) __write_reg(iface, reg, val)
-#define read_reg(reg) __read_reg(iface, reg)
-
-
-
-#endif /* __I2C_KEYWEST_H__ */
diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c
deleted file mode 100644
index bfefe7f7a53d..000000000000
--- a/drivers/i2c/busses/i2c-pmac-smu.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- i2c Support for Apple SMU Controller
-
- Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
- <benh@kernel.crashing.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/completion.h>
-#include <linux/device.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
-#include <asm/smu.h>
-
-static int probe;
-
-MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("I2C driver for Apple's SMU");
-MODULE_LICENSE("GPL");
-module_param(probe, bool, 0);
-
-
-/* Physical interface */
-struct smu_iface
-{
- struct i2c_adapter adapter;
- struct completion complete;
- u32 busid;
-};
-
-static void smu_i2c_done(struct smu_i2c_cmd *cmd, void *misc)
-{
- struct smu_iface *iface = misc;
- complete(&iface->complete);
-}
-
-/*
- * SMBUS-type transfer entrypoint
- */
-static s32 smu_smbus_xfer( struct i2c_adapter* adap,
- u16 addr,
- unsigned short flags,
- char read_write,
- u8 command,
- int size,
- union i2c_smbus_data* data)
-{
- struct smu_iface *iface = i2c_get_adapdata(adap);
- struct smu_i2c_cmd cmd;
- int rc = 0;
- int read = (read_write == I2C_SMBUS_READ);
-
- cmd.info.bus = iface->busid;
- cmd.info.devaddr = (addr << 1) | (read ? 0x01 : 0x00);
-
- /* Prepare datas & select mode */
- switch (size) {
- case I2C_SMBUS_QUICK:
- cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
- cmd.info.datalen = 0;
- break;
- case I2C_SMBUS_BYTE:
- cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
- cmd.info.datalen = 1;
- if (!read)
- cmd.info.data[0] = data->byte;
- break;
- case I2C_SMBUS_BYTE_DATA:
- cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
- cmd.info.datalen = 1;
- cmd.info.sublen = 1;
- cmd.info.subaddr[0] = command;
- cmd.info.subaddr[1] = 0;
- cmd.info.subaddr[2] = 0;
- if (!read)
- cmd.info.data[0] = data->byte;
- break;
- case I2C_SMBUS_WORD_DATA:
- cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
- cmd.info.datalen = 2;
- cmd.info.sublen = 1;
- cmd.info.subaddr[0] = command;
- cmd.info.subaddr[1] = 0;
- cmd.info.subaddr[2] = 0;
- if (!read) {
- cmd.info.data[0] = data->byte & 0xff;
- cmd.info.data[1] = (data->byte >> 8) & 0xff;
- }
- break;
- /* Note that these are broken vs. the expected smbus API where
- * on reads, the lenght is actually returned from the function,
- * but I think the current API makes no sense and I don't want
- * any driver that I haven't verified for correctness to go
- * anywhere near a pmac i2c bus anyway ...
- */
- case I2C_SMBUS_BLOCK_DATA:
- cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
- cmd.info.datalen = data->block[0] + 1;
- if (cmd.info.datalen > 6)
- return -EINVAL;
- if (!read)
- memcpy(cmd.info.data, data->block, cmd.info.datalen);
- cmd.info.sublen = 1;
- cmd.info.subaddr[0] = command;
- cmd.info.subaddr[1] = 0;
- cmd.info.subaddr[2] = 0;
- break;
- case I2C_SMBUS_I2C_BLOCK_DATA:
- cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
- cmd.info.datalen = data->block[0];
- if (cmd.info.datalen > 7)
- return -EINVAL;
- if (!read)
- memcpy(cmd.info.data, &data->block[1],
- cmd.info.datalen);
- cmd.info.sublen = 1;
- cmd.info.subaddr[0] = command;
- cmd.info.subaddr[1] = 0;
- cmd.info.subaddr[2] = 0;
- break;
-
- default:
- return -EINVAL;
- }
-
- /* Turn a standardsub read into a combined mode access */
- if (read_write == I2C_SMBUS_READ &&
- cmd.info.type == SMU_I2C_TRANSFER_STDSUB)
- cmd.info.type = SMU_I2C_TRANSFER_COMBINED;
-
- /* Finish filling command and submit it */
- cmd.done = smu_i2c_done;
- cmd.misc = iface;
- rc = smu_queue_i2c(&cmd);
- if (rc < 0)
- return rc;
- wait_for_completion(&iface->complete);
- rc = cmd.status;
-
- if (!read || rc < 0)
- return rc;
-
- switch (size) {
- case I2C_SMBUS_BYTE:
- case I2C_SMBUS_BYTE_DATA:
- data->byte = cmd.info.data[0];
- break;
- case I2C_SMBUS_WORD_DATA:
- data->word = ((u16)cmd.info.data[1]) << 8;
- data->word |= cmd.info.data[0];
- break;
- /* Note that these are broken vs. the expected smbus API where
- * on reads, the lenght is actually returned from the function,
- * but I think the current API makes no sense and I don't want
- * any driver that I haven't verified for correctness to go
- * anywhere near a pmac i2c bus anyway ...
- */
- case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_I2C_BLOCK_DATA:
- memcpy(&data->block[0], cmd.info.data, cmd.info.datalen);
- break;
- }
-
- return rc;
-}
-
-static u32
-smu_smbus_func(struct i2c_adapter * adapter)
-{
- return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA;
-}
-
-/* For now, we only handle combined mode (smbus) */
-static struct i2c_algorithm smu_algorithm = {
- .smbus_xfer = smu_smbus_xfer,
- .functionality = smu_smbus_func,
-};
-
-static int create_iface(struct device_node *np, struct device *dev)
-{
- struct smu_iface* iface;
- u32 *reg, busid;
- int rc;
-
- reg = (u32 *)get_property(np, "reg", NULL);
- if (reg == NULL) {
- printk(KERN_ERR "i2c-pmac-smu: can't find bus number !\n");
- return -ENXIO;
- }
- busid = *reg;
-
- iface = kzalloc(sizeof(struct smu_iface), GFP_KERNEL);
- if (iface == NULL) {
- printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n");
- return -ENOMEM;
- }
- init_completion(&iface->complete);
- iface->busid = busid;
-
- dev_set_drvdata(dev, iface);
-
- sprintf(iface->adapter.name, "smu-i2c-%02x", busid);
- iface->adapter.algo = &smu_algorithm;
- iface->adapter.algo_data = NULL;
- iface->adapter.client_register = NULL;
- iface->adapter.client_unregister = NULL;
- i2c_set_adapdata(&iface->adapter, iface);
- iface->adapter.dev.parent = dev;
-
- rc = i2c_add_adapter(&iface->adapter);
- if (rc) {
- printk(KERN_ERR "i2c-pamc-smu.c: Adapter %s registration "
- "failed\n", iface->adapter.name);
- i2c_set_adapdata(&iface->adapter, NULL);
- }
-
- if (probe) {
- unsigned char addr;
- printk("Probe: ");
- for (addr = 0x00; addr <= 0x7f; addr++) {
- if (i2c_smbus_xfer(&iface->adapter,addr,
- 0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
- printk("%02x ", addr);
- }
- printk("\n");
- }
-
- printk(KERN_INFO "SMU i2c bus %x registered\n", busid);
-
- return 0;
-}
-
-static int dispose_iface(struct device *dev)
-{
- struct smu_iface *iface = dev_get_drvdata(dev);
- int rc;
-
- rc = i2c_del_adapter(&iface->adapter);
- i2c_set_adapdata(&iface->adapter, NULL);
- /* We aren't that prepared to deal with this... */
- if (rc)
- printk("i2c-pmac-smu.c: Failed to remove bus %s !\n",
- iface->adapter.name);
- dev_set_drvdata(dev, NULL);
- kfree(iface);
-
- return 0;
-}
-
-
-static int create_iface_of_platform(struct of_device* dev,
- const struct of_device_id *match)
-{
- return create_iface(dev->node, &dev->dev);
-}
-
-
-static int dispose_iface_of_platform(struct of_device* dev)
-{
- return dispose_iface(&dev->dev);
-}
-
-
-static struct of_device_id i2c_smu_match[] =
-{
- {
- .compatible = "smu-i2c",
- },
- {},
-};
-static struct of_platform_driver i2c_smu_of_platform_driver =
-{
- .name = "i2c-smu",
- .match_table = i2c_smu_match,
- .probe = create_iface_of_platform,
- .remove = dispose_iface_of_platform
-};
-
-
-static int __init i2c_pmac_smu_init(void)
-{
- of_register_driver(&i2c_smu_of_platform_driver);
- return 0;
-}
-
-
-static void __exit i2c_pmac_smu_cleanup(void)
-{
- of_unregister_driver(&i2c_smu_of_platform_driver);
-}
-
-module_init(i2c_pmac_smu_init);
-module_exit(i2c_pmac_smu_cleanup);
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
new file mode 100644
index 000000000000..df786eb55295
--- /dev/null
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -0,0 +1,290 @@
+/*
+ i2c Support for Apple SMU Controller
+
+ Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
+ <benh@kernel.crashing.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/prom.h>
+#include <asm/pmac_low_i2c.h>
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("I2C driver for Apple PowerMac");
+MODULE_LICENSE("GPL");
+
+/*
+ * SMBUS-type transfer entrypoint
+ */
+static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap,
+ u16 addr,
+ unsigned short flags,
+ char read_write,
+ u8 command,
+ int size,
+ union i2c_smbus_data* data)
+{
+ struct pmac_i2c_bus *bus = i2c_get_adapdata(adap);
+ int rc = 0;
+ int read = (read_write == I2C_SMBUS_READ);
+ int addrdir = (addr << 1) | read;
+ u8 local[2];
+
+ rc = pmac_i2c_open(bus, 0);
+ if (rc)
+ return rc;
+
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 0, 0, NULL, 0);
+ break;
+ case I2C_SMBUS_BYTE:
+ rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 0, 0, &data->byte, 1);
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ rc = pmac_i2c_setmode(bus, read ?
+ pmac_i2c_mode_combined :
+ pmac_i2c_mode_stdsub);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 1, command, &data->byte, 1);
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ rc = pmac_i2c_setmode(bus, read ?
+ pmac_i2c_mode_combined :
+ pmac_i2c_mode_stdsub);
+ if (rc)
+ goto bail;
+ if (!read) {
+ local[0] = data->word & 0xff;
+ local[1] = (data->word >> 8) & 0xff;
+ }
+ rc = pmac_i2c_xfer(bus, addrdir, 1, command, local, 2);
+ if (rc == 0 && read) {
+ data->word = ((u16)local[1]) << 8;
+ data->word |= local[0];
+ }
+ break;
+
+ /* Note that these are broken vs. the expected smbus API where
+ * on reads, the lenght is actually returned from the function,
+ * but I think the current API makes no sense and I don't want
+ * any driver that I haven't verified for correctness to go
+ * anywhere near a pmac i2c bus anyway ...
+ *
+ * I'm also not completely sure what kind of phases to do between
+ * the actual command and the data (what I am _supposed_ to do that
+ * is). For now, I assume writes are a single stream and reads have
+ * a repeat start/addr phase (but not stop in between)
+ */
+ case I2C_SMBUS_BLOCK_DATA:
+ rc = pmac_i2c_setmode(bus, read ?
+ pmac_i2c_mode_combined :
+ pmac_i2c_mode_stdsub);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 1, command, data->block,
+ data->block[0] + 1);
+
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ rc = pmac_i2c_setmode(bus, read ?
+ pmac_i2c_mode_combined :
+ pmac_i2c_mode_stdsub);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 1, command,
+ read ? data->block : &data->block[1],
+ data->block[0]);
+ break;
+
+ default:
+ rc = -EINVAL;
+ }
+ bail:
+ pmac_i2c_close(bus);
+ return rc;
+}
+
+/*
+ * Generic i2c master transfer entrypoint. This driver only support single
+ * messages (for "lame i2c" transfers). Anything else should use the smbus
+ * entry point
+ */
+static int i2c_powermac_master_xfer( struct i2c_adapter *adap,
+ struct i2c_msg *msgs,
+ int num)
+{
+ struct pmac_i2c_bus *bus = i2c_get_adapdata(adap);
+ int rc = 0;
+ int read;
+ int addrdir;
+
+ if (num != 1)
+ return -EINVAL;
+ if (msgs->flags & I2C_M_TEN)
+ return -EINVAL;
+ read = (msgs->flags & I2C_M_RD) != 0;
+ addrdir = (msgs->addr << 1) | read;
+ if (msgs->flags & I2C_M_REV_DIR_ADDR)
+ addrdir ^= 1;
+
+ rc = pmac_i2c_open(bus, 0);
+ if (rc)
+ return rc;
+ rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
+ bail:
+ pmac_i2c_close(bus);
+ return rc < 0 ? rc : msgs->len;
+}
+
+static u32 i2c_powermac_func(struct i2c_adapter * adapter)
+{
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_I2C;
+}
+
+/* For now, we only handle smbus */
+static struct i2c_algorithm i2c_powermac_algorithm = {
+ .smbus_xfer = i2c_powermac_smbus_xfer,
+ .master_xfer = i2c_powermac_master_xfer,
+ .functionality = i2c_powermac_func,
+};
+
+
+static int i2c_powermac_remove(struct device *dev)
+{
+ struct i2c_adapter *adapter = dev_get_drvdata(dev);
+ struct pmac_i2c_bus *bus = i2c_get_adapdata(adapter);
+ int rc;
+
+ rc = i2c_del_adapter(adapter);
+ pmac_i2c_detach_adapter(bus, adapter);
+ i2c_set_adapdata(adapter, NULL);
+ /* We aren't that prepared to deal with this... */
+ if (rc)
+ printk("i2c-powermac.c: Failed to remove bus %s !\n",
+ adapter->name);
+ dev_set_drvdata(dev, NULL);
+ kfree(adapter);
+
+ return 0;
+}
+
+
+static int i2c_powermac_probe(struct device *dev)
+{
+ struct pmac_i2c_bus *bus = dev->platform_data;
+ struct device_node *parent = NULL;
+ struct i2c_adapter *adapter;
+ char name[32], *basename;
+ int rc;
+
+ if (bus == NULL)
+ return -EINVAL;
+
+ /* Ok, now we need to make up a name for the interface that will
+ * match what we used to do in the past, that is basically the
+ * controller's parent device node for keywest. PMU didn't have a
+ * naming convention and SMU has a different one
+ */
+ switch(pmac_i2c_get_type(bus)) {
+ case pmac_i2c_bus_keywest:
+ parent = of_get_parent(pmac_i2c_get_controller(bus));
+ if (parent == NULL)
+ return -EINVAL;
+ basename = parent->name;
+ break;
+ case pmac_i2c_bus_pmu:
+ basename = "pmu";
+ break;
+ case pmac_i2c_bus_smu:
+ /* This is not what we used to do but I'm fixing drivers at
+ * the same time as this change
+ */
+ basename = "smu";
+ break;
+ default:
+ return -EINVAL;
+ }
+ snprintf(name, 32, "%s %d", basename, pmac_i2c_get_channel(bus));
+ of_node_put(parent);
+
+ adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+ if (adapter == NULL) {
+ printk(KERN_ERR "i2c-powermac: can't allocate inteface !\n");
+ return -ENOMEM;
+ }
+ dev_set_drvdata(dev, adapter);
+ strcpy(adapter->name, name);
+ adapter->algo = &i2c_powermac_algorithm;
+ i2c_set_adapdata(adapter, bus);
+ adapter->dev.parent = dev;
+ pmac_i2c_attach_adapter(bus, adapter);
+ rc = i2c_add_adapter(adapter);
+ if (rc) {
+ printk(KERN_ERR "i2c-powermac: Adapter %s registration "
+ "failed\n", name);
+ i2c_set_adapdata(adapter, NULL);
+ pmac_i2c_detach_adapter(bus, adapter);
+ }
+
+ printk(KERN_INFO "PowerMac i2c bus %s registered\n", name);
+ return rc;
+}
+
+
+static struct device_driver i2c_powermac_driver = {
+ .name = "i2c-powermac",
+ .bus = &platform_bus_type,
+ .probe = i2c_powermac_probe,
+ .remove = i2c_powermac_remove,
+};
+
+static int __init i2c_powermac_init(void)
+{
+ driver_register(&i2c_powermac_driver);
+ return 0;
+}
+
+
+static void __exit i2c_powermac_cleanup(void)
+{
+ driver_unregister(&i2c_powermac_driver);
+}
+
+module_init(i2c_powermac_init);
+module_exit(i2c_powermac_cleanup);
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 16b28357885b..5013b1285e22 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1271,7 +1271,7 @@ static int
pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
{
struct device_node *np = pmif->node;
- int *bidp, i;
+ int *bidp;
pmif->cable_80 = 0;
pmif->broken_dma = pmif->broken_dma_warn = 0;
@@ -1430,7 +1430,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
pmif = &pmac_ide[i];
hwif = &ide_hwifs[i];
- if (mdev->ofdev.node->n_addrs == 0) {
+ if (macio_resource_count(mdev) == 0) {
printk(KERN_WARNING "ide%d: no address for %s\n",
i, mdev->ofdev.node->full_name);
return -ENXIO;
@@ -1686,7 +1686,7 @@ pmac_ide_probe(void)
#else
macio_register_driver(&pmac_ide_macio_driver);
pci_register_driver(&pmac_ide_pci_driver);
-#endif
+#endif
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index a0ea44c3e8b1..7d4a0ac28c06 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -149,14 +149,14 @@ config MAC_EMUMOUSEBTN
config THERM_WINDTUNNEL
tristate "Support for thermal management on Windtunnel G4s"
- depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+ depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
help
This driver provides some thermostat and fan control for the desktop
G4 "Windtunnel"
config THERM_ADT746X
tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
- depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+ depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
help
This driver provides some thermostat and fan control for the
iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
@@ -164,7 +164,7 @@ config THERM_ADT746X
config THERM_PM72
tristate "Support for thermal management on PowerMac G5"
- depends on I2C && I2C_KEYWEST && PPC_PMAC64
+ depends on I2C && I2C_POWERMAC && PPC_PMAC64
help
This driver provides thermostat and fan control for the desktop
G5 machines.
@@ -175,14 +175,14 @@ config WINDFARM
config WINDFARM_PM81
tristate "Support for thermal management on iMac G5"
depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
- select I2C_PMAC_SMU
+ select I2C_POWERMAC
help
This driver provides thermal control for the iMacG5
config WINDFARM_PM91
tristate "Support for thermal management on PowerMac9,1"
depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
- select I2C_PMAC_SMU
+ select I2C_POWERMAC
help
This driver provides thermal control for the PowerMac9,1
which is the recent (SMU based) single CPU desktop G5
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 228e1852a836..2a545ceb523b 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -3,6 +3,13 @@
* a MacIO ASIC. Interface to new driver model mostly
* stolen from the PCI version.
*
+ * Copyright (C) 2005 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
* TODO:
*
* - Don't probe below media bay by default, but instead provide
@@ -218,12 +225,14 @@ postcore_initcall(macio_bus_driver_init);
/**
- * macio_release_dev - free a macio device structure when all users of it are finished.
+ * macio_release_dev - free a macio device structure when all users of it are
+ * finished.
* @dev: device that's been disconnected
*
- * Will be called only by the device core when all users of this macio device are
- * done. This currently means never as we don't hot remove any macio device yet,
- * though that will happen with mediabay based devices in a later implementation.
+ * Will be called only by the device core when all users of this macio device
+ * are done. This currently means never as we don't hot remove any macio
+ * device yet, though that will happen with mediabay based devices in a later
+ * implementation.
*/
static void macio_release_dev(struct device *dev)
{
@@ -242,49 +251,114 @@ static void macio_release_dev(struct device *dev)
* If this routine returns non-null, then the resource is completely
* skipped.
*/
-static int macio_resource_quirks(struct device_node *np, struct resource *res, int index)
+static int macio_resource_quirks(struct device_node *np, struct resource *res,
+ int index)
{
if (res->flags & IORESOURCE_MEM) {
/* Grand Central has too large resource 0 on some machines */
- if (index == 0 && !strcmp(np->name, "gc")) {
- np->addrs[0].size = 0x20000;
+ if (index == 0 && !strcmp(np->name, "gc"))
res->end = res->start + 0x1ffff;
- }
+
/* Airport has bogus resource 2 */
if (index >= 2 && !strcmp(np->name, "radio"))
return 1;
+
+#ifndef CONFIG_PPC64
/* DBDMAs may have bogus sizes */
- if ((res->start & 0x0001f000) == 0x00008000) {
- np->addrs[index].size = 0x100;
+ if ((res->start & 0x0001f000) == 0x00008000)
res->end = res->start + 0xff;
- }
- /* ESCC parent eats child resources. We could have added a level of hierarchy,
- * but I don't really feel the need for it */
+#endif /* CONFIG_PPC64 */
+
+ /* ESCC parent eats child resources. We could have added a
+ * level of hierarchy, but I don't really feel the need
+ * for it
+ */
if (!strcmp(np->name, "escc"))
return 1;
+
/* ESCC has bogus resources >= 3 */
- if (index >= 3 && !(strcmp(np->name, "ch-a") && strcmp(np->name, "ch-b")))
+ if (index >= 3 && !(strcmp(np->name, "ch-a") &&
+ strcmp(np->name, "ch-b")))
return 1;
+
/* Media bay has too many resources, keep only first one */
if (index > 0 && !strcmp(np->name, "media-bay"))
return 1;
+
/* Some older IDE resources have bogus sizes */
if (!(strcmp(np->name, "IDE") && strcmp(np->name, "ATA") &&
strcmp(np->type, "ide") && strcmp(np->type, "ata"))) {
- if (index == 0 && np->addrs[0].size > 0x1000) {
- np->addrs[0].size = 0x1000;
+ if (index == 0 && (res->end - res->start) > 0xfff)
res->end = res->start + 0xfff;
- }
- if (index == 1 && np->addrs[1].size > 0x100) {
- np->addrs[1].size = 0x100;
+ if (index == 1 && (res->end - res->start) > 0xff)
res->end = res->start + 0xff;
- }
}
}
return 0;
}
+static void macio_setup_interrupts(struct macio_dev *dev)
+{
+ struct device_node *np = dev->ofdev.node;
+ int i,j;
+
+ /* For now, we use pre-parsed entries in the device-tree for
+ * interrupt routing and addresses, but we should change that
+ * to dynamically parsed entries and so get rid of most of the
+ * clutter in struct device_node
+ */
+ for (i = j = 0; i < np->n_intrs; i++) {
+ struct resource *res = &dev->interrupt[j];
+
+ if (j >= MACIO_DEV_COUNT_IRQS)
+ break;
+ res->start = np->intrs[i].line;
+ res->flags = IORESOURCE_IO;
+ if (np->intrs[j].sense)
+ res->flags |= IORESOURCE_IRQ_LOWLEVEL;
+ else
+ res->flags |= IORESOURCE_IRQ_HIGHEDGE;
+ res->name = dev->ofdev.dev.bus_id;
+ if (macio_resource_quirks(np, res, i))
+ memset(res, 0, sizeof(struct resource));
+ else
+ j++;
+ }
+ dev->n_interrupts = j;
+}
+
+static void macio_setup_resources(struct macio_dev *dev,
+ struct resource *parent_res)
+{
+ struct device_node *np = dev->ofdev.node;
+ struct resource r;
+ int index;
+
+ for (index = 0; of_address_to_resource(np, index, &r) == 0; index++) {
+ struct resource *res = &dev->resource[index];
+ if (index >= MACIO_DEV_COUNT_RESOURCES)
+ break;
+ *res = r;
+ res->name = dev->ofdev.dev.bus_id;
+
+ if (macio_resource_quirks(np, res, index)) {
+ memset(res, 0, sizeof(struct resource));
+ continue;
+ }
+ /* Currently, we consider failure as harmless, this may
+ * change in the future, once I've found all the device
+ * tree bugs in older machines & worked around them
+ */
+ if (insert_resource(parent_res, res)) {
+ printk(KERN_WARNING "Can't request resource "
+ "%d for MacIO device %s\n",
+ index, dev->ofdev.dev.bus_id);
+ }
+ }
+ dev->n_resources = index;
+}
+
/**
* macio_add_one_device - Add one device from OF node to the device tree
* @chip: pointer to the macio_chip holding the device
@@ -294,12 +368,13 @@ static int macio_resource_quirks(struct device_node *np, struct resource *res, i
* When media-bay is changed to hotswap drivers, this function will
* be exposed to the bay driver some way...
*/
-static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct device *parent,
- struct device_node *np, struct macio_dev *in_bay,
+static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
+ struct device *parent,
+ struct device_node *np,
+ struct macio_dev *in_bay,
struct resource *parent_res)
{
struct macio_dev *dev;
- int i, j;
u32 *reg;
if (np == NULL)
@@ -326,7 +401,8 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct d
/* MacIO itself has a different reg, we use it's PCI base */
if (np == chip->of_node) {
- sprintf(dev->ofdev.dev.bus_id, "%1d.%08lx:%.*s", chip->lbus.index,
+ sprintf(dev->ofdev.dev.bus_id, "%1d.%08lx:%.*s",
+ chip->lbus.index,
#ifdef CONFIG_PCI
pci_resource_start(chip->lbus.pdev, 0),
#else
@@ -335,57 +411,16 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct d
MAX_NODE_NAME_SIZE, np->name);
} else {
reg = (u32 *)get_property(np, "reg", NULL);
- sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s", chip->lbus.index,
+ sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s",
+ chip->lbus.index,
reg ? *reg : 0, MAX_NODE_NAME_SIZE, np->name);
}
- /* For now, we use pre-parsed entries in the device-tree for
- * interrupt routing and addresses, but we should change that
- * to dynamically parsed entries and so get rid of most of the
- * clutter in struct device_node
- */
- for (i = j = 0; i < np->n_intrs; i++) {
- struct resource *res = &dev->interrupt[j];
-
- if (j >= MACIO_DEV_COUNT_IRQS)
- break;
- res->start = np->intrs[i].line;
- res->flags = IORESOURCE_IO;
- if (np->intrs[j].sense)
- res->flags |= IORESOURCE_IRQ_LOWLEVEL;
- else
- res->flags |= IORESOURCE_IRQ_HIGHEDGE;
- res->name = dev->ofdev.dev.bus_id;
- if (macio_resource_quirks(np, res, i))
- memset(res, 0, sizeof(struct resource));
- else
- j++;
- }
- dev->n_interrupts = j;
- for (i = j = 0; i < np->n_addrs; i++) {
- struct resource *res = &dev->resource[j];
-
- if (j >= MACIO_DEV_COUNT_RESOURCES)
- break;
- res->start = np->addrs[i].address;
- res->end = np->addrs[i].address + np->addrs[i].size - 1;
- res->flags = IORESOURCE_MEM;
- res->name = dev->ofdev.dev.bus_id;
- if (macio_resource_quirks(np, res, i))
- memset(res, 0, sizeof(struct resource));
- else {
- j++;
- /* Currently, we consider failure as harmless, this may
- * change in the future, once I've found all the device
- * tree bugs in older machines & worked around them
- */
- if (insert_resource(parent_res, res))
- printk(KERN_WARNING "Can't request resource %d for MacIO"
- " device %s\n", i, dev->ofdev.dev.bus_id);
- }
- }
- dev->n_resources = j;
+ /* Setup interrupts & resources */
+ macio_setup_interrupts(dev);
+ macio_setup_resources(dev, parent_res);
+ /* Register with core */
if (of_device_register(&dev->ofdev) != 0) {
printk(KERN_DEBUG"macio: device registration error for %s!\n",
dev->ofdev.dev.bus_id);
@@ -442,36 +477,42 @@ static void macio_pci_add_devices(struct macio_chip *chip)
/* First scan 1st level */
for (np = NULL; (np = of_get_next_child(pnode, np)) != NULL;) {
- if (!macio_skip_device(np)) {
- of_node_get(np);
- mdev = macio_add_one_device(chip, &rdev->ofdev.dev, np, NULL, root_res);
- if (mdev == NULL)
- of_node_put(np);
- else if (strncmp(np->name, "media-bay", 9) == 0)
- mbdev = mdev;
- else if (strncmp(np->name, "escc", 4) == 0)
- sdev = mdev;
- }
+ if (macio_skip_device(np))
+ continue;
+ of_node_get(np);
+ mdev = macio_add_one_device(chip, &rdev->ofdev.dev, np, NULL,
+ root_res);
+ if (mdev == NULL)
+ of_node_put(np);
+ else if (strncmp(np->name, "media-bay", 9) == 0)
+ mbdev = mdev;
+ else if (strncmp(np->name, "escc", 4) == 0)
+ sdev = mdev;
}
/* Add media bay devices if any */
if (mbdev)
- for (np = NULL; (np = of_get_next_child(mbdev->ofdev.node, np)) != NULL;)
- if (!macio_skip_device(np)) {
- of_node_get(np);
- if (macio_add_one_device(chip, &mbdev->ofdev.dev, np, mbdev,
- root_res) == NULL)
- of_node_put(np);
- }
+ for (np = NULL; (np = of_get_next_child(mbdev->ofdev.node, np))
+ != NULL;) {
+ if (macio_skip_device(np))
+ continue;
+ of_node_get(np);
+ if (macio_add_one_device(chip, &mbdev->ofdev.dev, np,
+ mbdev, root_res) == NULL)
+ of_node_put(np);
+ }
+
/* Add serial ports if any */
if (sdev) {
- for (np = NULL; (np = of_get_next_child(sdev->ofdev.node, np)) != NULL;)
- if (!macio_skip_device(np)) {
- of_node_get(np);
- if (macio_add_one_device(chip, &sdev->ofdev.dev, np, NULL,
- root_res) == NULL)
- of_node_put(np);
- }
+ for (np = NULL; (np = of_get_next_child(sdev->ofdev.node, np))
+ != NULL;) {
+ if (macio_skip_device(np))
+ continue;
+ of_node_get(np);
+ if (macio_add_one_device(chip, &sdev->ofdev.dev, np,
+ NULL, root_res) == NULL)
+ of_node_put(np);
+ }
}
}
@@ -519,7 +560,8 @@ void macio_unregister_driver(struct macio_driver *drv)
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
-int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name)
+int macio_request_resource(struct macio_dev *dev, int resource_no,
+ const char *name)
{
if (macio_resource_len(dev, resource_no) == 0)
return 0;
@@ -606,20 +648,20 @@ static int __devinit macio_pci_probe(struct pci_dev *pdev, const struct pci_devi
if (ent->vendor != PCI_VENDOR_ID_APPLE)
return -ENODEV;
- /* Note regarding refcounting: We assume pci_device_to_OF_node() is ported
- * to new OF APIs and returns a node with refcount incremented. This isn't
- * the case today, but on the other hand ppc32 doesn't do refcounting. This
- * will have to be fixed when going to ppc64. --BenH.
+ /* Note regarding refcounting: We assume pci_device_to_OF_node() is
+ * ported to new OF APIs and returns a node with refcount incremented.
*/
np = pci_device_to_OF_node(pdev);
if (np == NULL)
return -ENODEV;
- /* This assumption is wrong, fix that here for now until I fix the arch */
+ /* The above assumption is wrong !!!
+ * fix that here for now until I fix the arch code
+ */
of_node_get(np);
- /* We also assume that pmac_feature will have done a get() on nodes stored
- * in the macio chips array
+ /* We also assume that pmac_feature will have done a get() on nodes
+ * stored in the macio chips array
*/
chip = macio_find(np, macio_unknown);
of_node_put(np);
@@ -639,9 +681,9 @@ static int __devinit macio_pci_probe(struct pci_dev *pdev, const struct pci_devi
/*
* HACK ALERT: The WallStreet PowerBook and some OHare based machines
- * have 2 macio ASICs. I must probe the "main" one first or IDE ordering
- * will be incorrect. So I put on "hold" the second one since it seem to
- * appear first on PCI
+ * have 2 macio ASICs. I must probe the "main" one first or IDE
+ * ordering will be incorrect. So I put on "hold" the second one since
+ * it seem to appear first on PCI
*/
if (chip->type == macio_gatwick || chip->type == macio_ohareII)
if (macio_chips[0].lbus.pdev == NULL) {
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index b856bb67169c..8dbf2852bae0 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -647,6 +647,7 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de
struct media_bay_info* bay;
u32 __iomem *regbase;
struct device_node *ofnode;
+ unsigned long base;
int i;
ofnode = mdev->ofdev.node;
@@ -656,10 +657,11 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de
if (macio_request_resources(mdev, "media-bay"))
return -EBUSY;
/* Media bay registers are located at the beginning of the
- * mac-io chip, we get the parent address for now (hrm...)
+ * mac-io chip, for now, we trick and align down the first
+ * resource passed in
*/
- regbase = (u32 __iomem *)
- ioremap(ofnode->parent->addrs[0].address, 0x100);
+ base = macio_resource_start(mdev, 0) & 0xffff0000u;
+ regbase = (u32 __iomem *)ioremap(base, 0x100);
if (regbase == NULL) {
macio_release_resources(mdev);
return -ENOMEM;
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index e8378274d710..db2ae71d07ef 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -53,7 +53,7 @@
#undef DEBUG_SMU
#ifdef DEBUG_SMU
-#define DPRINTK(fmt, args...) do { udbg_printf(KERN_DEBUG fmt , ##args); } while (0)
+#define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0)
#else
#define DPRINTK(fmt, args...) do { } while (0)
#endif
@@ -94,6 +94,8 @@ struct smu_device {
static struct smu_device *smu;
static DECLARE_MUTEX(smu_part_access);
+static void smu_i2c_retry(unsigned long data);
+
/*
* SMU driver low level stuff
*/
@@ -469,7 +471,6 @@ int __init smu_init (void)
smu->of_node = np;
smu->db_irq = NO_IRQ;
smu->msg_irq = NO_IRQ;
- init_timer(&smu->i2c_timer);
/* smu_cmdbuf_abs is in the low 2G of RAM, can be converted to a
* 32 bits value safely
@@ -544,6 +545,10 @@ static int smu_late_init(void)
if (!smu)
return 0;
+ init_timer(&smu->i2c_timer);
+ smu->i2c_timer.function = smu_i2c_retry;
+ smu->i2c_timer.data = (unsigned long)smu;
+
/*
* Try to request the interrupts
*/
@@ -570,7 +575,10 @@ static int smu_late_init(void)
return 0;
}
-arch_initcall(smu_late_init);
+/* This has to be before arch_initcall as the low i2c stuff relies on the
+ * above having been done before we reach arch_initcalls
+ */
+core_initcall(smu_late_init);
/*
* sysfs visibility
@@ -580,20 +588,10 @@ static void smu_expose_childs(void *unused)
{
struct device_node *np;
- for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;) {
- if (device_is_compatible(np, "smu-i2c")) {
- char name[32];
- u32 *reg = (u32 *)get_property(np, "reg", NULL);
-
- if (reg == NULL)
- continue;
- sprintf(name, "smu-i2c-%02x", *reg);
- of_platform_device_create(np, name, &smu->of_dev->dev);
- }
+ for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;)
if (device_is_compatible(np, "smu-sensors"))
- of_platform_device_create(np, "smu-sensors", &smu->of_dev->dev);
- }
-
+ of_platform_device_create(np, "smu-sensors",
+ &smu->of_dev->dev);
}
static DECLARE_WORK(smu_expose_childs_work, smu_expose_childs, NULL);
@@ -712,13 +710,13 @@ static void smu_i2c_complete_command(struct smu_i2c_cmd *cmd, int fail)
static void smu_i2c_retry(unsigned long data)
{
- struct smu_i2c_cmd *cmd = (struct smu_i2c_cmd *)data;
+ struct smu_i2c_cmd *cmd = smu->cmd_i2c_cur;
DPRINTK("SMU: i2c failure, requeuing...\n");
/* requeue command simply by resetting reply_len */
cmd->pdata[0] = 0xff;
- cmd->scmd.reply_len = 0x10;
+ cmd->scmd.reply_len = sizeof(cmd->pdata);
smu_queue_cmd(&cmd->scmd);
}
@@ -747,10 +745,8 @@ static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc)
*/
if (fail && --cmd->retries > 0) {
DPRINTK("SMU: i2c failure, starting timer...\n");
- smu->i2c_timer.function = smu_i2c_retry;
- smu->i2c_timer.data = (unsigned long)cmd;
- smu->i2c_timer.expires = jiffies + msecs_to_jiffies(5);
- add_timer(&smu->i2c_timer);
+ BUG_ON(cmd != smu->cmd_i2c_cur);
+ mod_timer(&smu->i2c_timer, jiffies + msecs_to_jiffies(5));
return;
}
@@ -764,7 +760,7 @@ static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc)
/* Ok, initial command complete, now poll status */
scmd->reply_buf = cmd->pdata;
- scmd->reply_len = 0x10;
+ scmd->reply_len = sizeof(cmd->pdata);
scmd->data_buf = cmd->pdata;
scmd->data_len = 1;
cmd->pdata[0] = 0;
@@ -786,7 +782,7 @@ int smu_queue_i2c(struct smu_i2c_cmd *cmd)
cmd->scmd.done = smu_i2c_low_completion;
cmd->scmd.misc = cmd;
cmd->scmd.reply_buf = cmd->pdata;
- cmd->scmd.reply_len = 0x10;
+ cmd->scmd.reply_len = sizeof(cmd->pdata);
cmd->scmd.data_buf = (u8 *)(char *)&cmd->info;
cmd->scmd.status = 1;
cmd->stage = 0;
@@ -909,10 +905,13 @@ static struct smu_sdbp_header *smu_create_sdb_partition(int id)
struct property *prop;
/* First query the partition info */
+ DPRINTK("SMU: Query partition infos ... (irq=%d)\n", smu->db_irq);
smu_queue_simple(&cmd, SMU_CMD_PARTITION_COMMAND, 2,
smu_done_complete, &comp,
SMU_CMD_PARTITION_LATEST, id);
wait_for_completion(&comp);
+ DPRINTK("SMU: done, status: %d, reply_len: %d\n",
+ cmd.cmd.status, cmd.cmd.reply_len);
/* Partition doesn't exist (or other error) */
if (cmd.cmd.status != 0 || cmd.cmd.reply_len != 6)
@@ -975,6 +974,8 @@ struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size,
sprintf(pname, "sdb-partition-%02x", id);
+ DPRINTK("smu_get_sdb_partition(%02x)\n", id);
+
if (interruptible) {
int rc;
rc = down_interruptible(&smu_part_access);
@@ -986,6 +987,7 @@ struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size,
part = (struct smu_sdbp_header *)get_property(smu->of_node,
pname, size);
if (part == NULL) {
+ DPRINTK("trying to extract from SMU ...\n");
part = smu_create_sdb_partition(id);
if (part != NULL && size)
*size = part->len << 2;
diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index d843a6c9c6df..2d9d79150403 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -127,39 +127,34 @@ struct adb_driver via_cuda_driver = {
#endif /* CONFIG_ADB */
#ifdef CONFIG_PPC
-int __init
-find_via_cuda(void)
+int __init find_via_cuda(void)
{
- int err;
struct adb_request req;
+ phys_addr_t taddr;
+ u32 *reg;
+ int err;
if (vias != 0)
return 1;
- vias = find_devices("via-cuda");
+ vias = of_find_node_by_name(NULL, "via-cuda");
if (vias == 0)
return 0;
- if (vias->next != 0)
- printk(KERN_WARNING "Warning: only using 1st via-cuda\n");
-
-#if 0
- { int i;
-
- printk("find_via_cuda: node = %p, addrs =", vias->node);
- for (i = 0; i < vias->n_addrs; ++i)
- printk(" %x(%x)", vias->addrs[i].address, vias->addrs[i].size);
- printk(", intrs =");
- for (i = 0; i < vias->n_intrs; ++i)
- printk(" %x", vias->intrs[i].line);
- printk("\n"); }
-#endif
- if (vias->n_addrs != 1 || vias->n_intrs != 1) {
- printk(KERN_ERR "via-cuda: expecting 1 address (%d) and 1 interrupt (%d)\n",
- vias->n_addrs, vias->n_intrs);
- if (vias->n_addrs < 1 || vias->n_intrs < 1)
- return 0;
+ reg = (u32 *)get_property(vias, "reg", NULL);
+ if (reg == NULL) {
+ printk(KERN_ERR "via-cuda: No \"reg\" property !\n");
+ goto fail;
+ }
+ taddr = of_translate_address(vias, reg);
+ if (taddr == 0) {
+ printk(KERN_ERR "via-cuda: Can't translate address !\n");
+ goto fail;
+ }
+ via = ioremap(taddr, 0x2000);
+ if (via == NULL) {
+ printk(KERN_ERR "via-cuda: Can't map address !\n");
+ goto fail;
}
- via = ioremap(vias->addrs->address, 0x2000);
cuda_state = idle;
sys_ctrler = SYS_CTRLER_CUDA;
@@ -185,6 +180,11 @@ find_via_cuda(void)
cuda_poll();
return 1;
+
+ fail:
+ of_node_put(vias);
+ vias = NULL;
+ return 0;
}
#endif /* CONFIG_PPC */
@@ -193,10 +193,6 @@ static int __init via_cuda_start(void)
if (via == NULL)
return -ENODEV;
-#ifdef CONFIG_PPC
- request_OF_resource(vias, 0, NULL);
-#endif
-
if (request_irq(CUDA_IRQ, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
printk(KERN_ERR "cuda_init: can't get irq %d\n", CUDA_IRQ);
return -EAGAIN;
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 564043508569..6eb93e45fcd3 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -55,6 +55,8 @@
#include <asm/sections.h>
#include <asm/irq.h>
#include <asm/pmac_feature.h>
+#include <asm/pmac_pfunc.h>
+#include <asm/pmac_low_i2c.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
#include <asm/cputable.h>
@@ -147,6 +149,7 @@ static struct device_node *vias;
static int pmu_kind = PMU_UNKNOWN;
static int pmu_fully_inited = 0;
static int pmu_has_adb;
+static struct device_node *gpio_node;
static unsigned char __iomem *gpio_reg = NULL;
static int gpio_irq = -1;
static int gpio_irq_enabled = -1;
@@ -157,8 +160,8 @@ static int pmu_version;
static int drop_interrupts;
#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
static int option_lid_wakeup = 1;
-static int sleep_in_progress;
#endif /* CONFIG_PM && CONFIG_PPC32 */
+static int sleep_in_progress;
static unsigned long async_req_locks;
static unsigned int pmu_irq_stats[11];
@@ -196,7 +199,6 @@ static int pmu_adb_reset_bus(void);
#endif /* CONFIG_ADB */
static int init_pmu(void);
-static int pmu_queue_request(struct adb_request *req);
static void pmu_start(void);
static irqreturn_t via_pmu_interrupt(int irq, void *arg, struct pt_regs *regs);
static irqreturn_t gpio1_interrupt(int irq, void *arg, struct pt_regs *regs);
@@ -295,22 +297,26 @@ static struct backlight_controller pmu_backlight_controller = {
};
#endif /* CONFIG_PMAC_BACKLIGHT */
-int
-find_via_pmu(void)
+int __init find_via_pmu(void)
{
+ u64 taddr;
+ u32 *reg;
+
if (via != 0)
return 1;
- vias = find_devices("via-pmu");
- if (vias == 0)
+ vias = of_find_node_by_name(NULL, "via-pmu");
+ if (vias == NULL)
return 0;
- if (vias->next != 0)
- printk(KERN_WARNING "Warning: only using 1st via-pmu\n");
- if (vias->n_addrs < 1 || vias->n_intrs < 1) {
- printk(KERN_ERR "via-pmu: %d addresses, %d interrupts!\n",
- vias->n_addrs, vias->n_intrs);
- if (vias->n_addrs < 1 || vias->n_intrs < 1)
- return 0;
+ reg = (u32 *)get_property(vias, "reg", NULL);
+ if (reg == NULL) {
+ printk(KERN_ERR "via-pmu: No \"reg\" property !\n");
+ goto fail;
+ }
+ taddr = of_translate_address(vias, reg);
+ if (taddr == OF_BAD_ADDR) {
+ printk(KERN_ERR "via-pmu: Can't translate address !\n");
+ goto fail;
}
spin_lock_init(&pmu_lock);
@@ -331,7 +337,8 @@ find_via_pmu(void)
pmu_kind = PMU_HEATHROW_BASED;
else if (device_is_compatible(vias->parent, "Keylargo")
|| device_is_compatible(vias->parent, "K2-Keylargo")) {
- struct device_node *gpio, *gpiop;
+ struct device_node *gpiop;
+ u64 gaddr = OF_BAD_ADDR;
pmu_kind = PMU_KEYLARGO_BASED;
pmu_has_adb = (find_type_devices("adb") != NULL);
@@ -341,19 +348,24 @@ find_via_pmu(void)
PMU_INT_TICK |
PMU_INT_ENVIRONMENT;
- gpiop = find_devices("gpio");
- if (gpiop && gpiop->n_addrs) {
- gpio_reg = ioremap(gpiop->addrs->address, 0x10);
- gpio = find_devices("extint-gpio1");
- if (gpio == NULL)
- gpio = find_devices("pmu-interrupt");
- if (gpio && gpio->parent == gpiop && gpio->n_intrs)
- gpio_irq = gpio->intrs[0].line;
+ gpiop = of_find_node_by_name(NULL, "gpio");
+ if (gpiop) {
+ reg = (u32 *)get_property(gpiop, "reg", NULL);
+ if (reg)
+ gaddr = of_translate_address(gpiop, reg);
+ if (gaddr != OF_BAD_ADDR)
+ gpio_reg = ioremap(gaddr, 0x10);
}
+ if (gpio_reg == NULL)
+ printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n");
} else
pmu_kind = PMU_UNKNOWN;
- via = ioremap(vias->addrs->address, 0x2000);
+ via = ioremap(taddr, 0x2000);
+ if (via == NULL) {
+ printk(KERN_ERR "via-pmu: Can't map address !\n");
+ goto fail;
+ }
out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */
out_8(&via[IFR], 0x7f); /* clear IFR */
@@ -365,23 +377,25 @@ find_via_pmu(void)
return 0;
}
- printk(KERN_INFO "PMU driver %d initialized for %s, firmware: %02x\n",
+ printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n",
PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version);
sys_ctrler = SYS_CTRLER_PMU;
return 1;
+ fail:
+ of_node_put(vias);
+ vias = NULL;
+ return 0;
}
#ifdef CONFIG_ADB
-static int
-pmu_probe(void)
+static int pmu_probe(void)
{
return vias == NULL? -ENODEV: 0;
}
-static int __init
-pmu_init(void)
+static int __init pmu_init(void)
{
if (vias == NULL)
return -ENODEV;
@@ -405,7 +419,7 @@ static int __init via_pmu_start(void)
bright_req_2.complete = 1;
batt_req.complete = 1;
-#if defined(CONFIG_PPC32) && !defined(CONFIG_PPC_MERGE)
+#ifndef CONFIG_PPC_MERGE
if (pmu_kind == PMU_KEYLARGO_BASED)
openpic_set_irq_priority(vias->intrs[0].line,
OPENPIC_PRIORITY_DEFAULT + 1);
@@ -418,10 +432,22 @@ static int __init via_pmu_start(void)
return -EAGAIN;
}
- if (pmu_kind == PMU_KEYLARGO_BASED && gpio_irq != -1) {
- if (request_irq(gpio_irq, gpio1_interrupt, 0, "GPIO1 ADB", (void *)0))
- printk(KERN_ERR "pmu: can't get irq %d (GPIO1)\n", gpio_irq);
- gpio_irq_enabled = 1;
+ if (pmu_kind == PMU_KEYLARGO_BASED) {
+ gpio_node = of_find_node_by_name(NULL, "extint-gpio1");
+ if (gpio_node == NULL)
+ gpio_node = of_find_node_by_name(NULL,
+ "pmu-interrupt");
+ if (gpio_node && gpio_node->n_intrs > 0)
+ gpio_irq = gpio_node->intrs[0].line;
+
+ if (gpio_irq != -1) {
+ if (request_irq(gpio_irq, gpio1_interrupt, 0,
+ "GPIO1 ADB", (void *)0))
+ printk(KERN_ERR "pmu: can't get irq %d"
+ " (GPIO1)\n", gpio_irq);
+ else
+ gpio_irq_enabled = 1;
+ }
}
/* Enable interrupts */
@@ -454,9 +480,6 @@ static int __init via_pmu_dev_init(void)
if (vias == NULL)
return -ENODEV;
-#ifndef CONFIG_PPC64
- request_OF_resource(vias, 0, NULL);
-#endif
#ifdef CONFIG_PMAC_BACKLIGHT
/* Enable backlight */
register_backlight_controller(&pmu_backlight_controller, NULL, "pmu");
@@ -1371,7 +1394,6 @@ next:
}
pmu_done(req);
} else {
-#if defined(CONFIG_XMON) && !defined(CONFIG_PPC64)
if (len == 4 && data[1] == 0x2c) {
extern int xmon_wants_key, xmon_adb_keycode;
if (xmon_wants_key) {
@@ -1379,7 +1401,6 @@ next:
return;
}
}
-#endif /* defined(CONFIG_XMON) && !defined(CONFIG_PPC64) */
#ifdef CONFIG_ADB
/*
* XXX On the [23]400 the PMU gives us an up
@@ -1782,258 +1803,6 @@ pmu_present(void)
return via != 0;
}
-struct pmu_i2c_hdr {
- u8 bus;
- u8 mode;
- u8 bus2;
- u8 address;
- u8 sub_addr;
- u8 comb_addr;
- u8 count;
-};
-
-int
-pmu_i2c_combined_read(int bus, int addr, int subaddr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr & 0xfe;
- hdr->mode = PMU_I2C_MODE_COMBINED;
- hdr->bus2 = 0;
- hdr->sub_addr = subaddr;
- hdr->comb_addr = addr | 1;
- hdr->count = len;
-
- req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
- memcpy(data, &req.reply[1], req.reply_len - 1);
- return req.reply_len - 1;
- }
- }
- return -1;
-}
-
-int
-pmu_i2c_stdsub_write(int bus, int addr, int subaddr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr & 0xfe;
- hdr->mode = PMU_I2C_MODE_STDSUB;
- hdr->bus2 = 0;
- hdr->sub_addr = subaddr;
- hdr->comb_addr = addr & 0xfe;
- hdr->count = len;
-
- req.data[0] = PMU_I2C_CMD;
- memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
- req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- return len;
- }
- return -1;
-}
-
-int
-pmu_i2c_simple_read(int bus, int addr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr | 1;
- hdr->mode = PMU_I2C_MODE_SIMPLE;
- hdr->bus2 = 0;
- hdr->sub_addr = 0;
- hdr->comb_addr = 0;
- hdr->count = len;
-
- req.data[0] = PMU_I2C_CMD;
- req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
- memcpy(data, &req.reply[1], req.reply_len - 1);
- return req.reply_len - 1;
- }
- }
- return -1;
-}
-
-int
-pmu_i2c_simple_write(int bus, int addr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr & 0xfe;
- hdr->mode = PMU_I2C_MODE_SIMPLE;
- hdr->bus2 = 0;
- hdr->sub_addr = 0;
- hdr->comb_addr = 0;
- hdr->count = len;
-
- req.data[0] = PMU_I2C_CMD;
- memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
- req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- return len;
- }
- return -1;
-}
-
#ifdef CONFIG_PM
static LIST_HEAD(sleep_notifiers);
@@ -2338,8 +2107,9 @@ pmac_suspend_devices(void)
return -EBUSY;
}
- /* Disable clock spreading on some machines */
- pmac_tweak_clock_spreading(0);
+ /* Call platform functions marked "on sleep" */
+ pmac_pfunc_i2c_suspend();
+ pmac_pfunc_base_suspend();
/* Stop preemption */
preempt_disable();
@@ -2411,8 +2181,9 @@ pmac_wakeup_devices(void)
mdelay(10);
preempt_enable();
- /* Re-enable clock spreading on some machines */
- pmac_tweak_clock_spreading(1);
+ /* Call platform functions marked "on wake" */
+ pmac_pfunc_base_resume();
+ pmac_pfunc_i2c_resume();
/* Resume devices */
device_resume();
@@ -3130,16 +2901,13 @@ static int __init init_pmu_sysfs(void)
subsys_initcall(init_pmu_sysfs);
EXPORT_SYMBOL(pmu_request);
+EXPORT_SYMBOL(pmu_queue_request);
EXPORT_SYMBOL(pmu_poll);
EXPORT_SYMBOL(pmu_poll_adb);
EXPORT_SYMBOL(pmu_wait_complete);
EXPORT_SYMBOL(pmu_suspend);
EXPORT_SYMBOL(pmu_resume);
EXPORT_SYMBOL(pmu_unlock);
-EXPORT_SYMBOL(pmu_i2c_combined_read);
-EXPORT_SYMBOL(pmu_i2c_stdsub_write);
-EXPORT_SYMBOL(pmu_i2c_simple_read);
-EXPORT_SYMBOL(pmu_i2c_simple_write);
#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
EXPORT_SYMBOL(pmu_enable_irled);
EXPORT_SYMBOL(pmu_battery_count);
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 57460e46c89f..906d3ecae6e6 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -21,6 +21,7 @@
#include <asm/io.h>
#include <asm/system.h>
#include <asm/sections.h>
+#include <asm/pmac_low_i2c.h>
#include "windfarm.h"
@@ -157,53 +158,21 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
static int wf_lm75_attach(struct i2c_adapter *adapter)
{
- u8 bus_id;
- struct device_node *smu, *bus, *dev;
-
- /* We currently only deal with LM75's hanging off the SMU
- * i2c busses. If we extend that driver to other/older
- * machines, we should split this function into SMU-i2c,
- * keywest-i2c, PMU-i2c, ...
- */
+ struct device_node *busnode, *dev;
+ struct pmac_i2c_bus *bus;
DBG("wf_lm75: adapter %s detected\n", adapter->name);
- if (strncmp(adapter->name, "smu-i2c-", 8) != 0)
- return 0;
- smu = of_find_node_by_type(NULL, "smu");
- if (smu == NULL)
- return 0;
-
- /* Look for the bus in the device-tree */
- bus_id = (u8)simple_strtoul(adapter->name + 8, NULL, 16);
-
- DBG("wf_lm75: bus ID is %x\n", bus_id);
-
- /* Look for sensors subdir */
- for (bus = NULL;
- (bus = of_get_next_child(smu, bus)) != NULL;) {
- u32 *reg;
-
- if (strcmp(bus->name, "i2c"))
- continue;
- reg = (u32 *)get_property(bus, "reg", NULL);
- if (reg == NULL)
- continue;
- if (bus_id == *reg)
- break;
- }
- of_node_put(smu);
- if (bus == NULL) {
- printk(KERN_WARNING "windfarm: SMU i2c bus 0x%x not found"
- " in device-tree !\n", bus_id);
- return 0;
- }
+ bus = pmac_i2c_adapter_to_bus(adapter);
+ if (bus == NULL)
+ return -ENODEV;
+ busnode = pmac_i2c_get_bus_node(bus);
DBG("wf_lm75: bus found, looking for device...\n");
/* Now look for lm75(s) in there */
for (dev = NULL;
- (dev = of_get_next_child(bus, dev)) != NULL;) {
+ (dev = of_get_next_child(busnode, dev)) != NULL;) {
const char *loc =
get_property(dev, "hwsensor-location", NULL);
u32 *reg = (u32 *)get_property(dev, "reg", NULL);
@@ -217,9 +186,6 @@ static int wf_lm75_attach(struct i2c_adapter *adapter)
else if (device_is_compatible(dev, "ds1775"))
wf_lm75_create(adapter, *reg, 1, loc);
}
-
- of_node_put(bus);
-
return 0;
}
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index 932dcf0366eb..311a4122bd70 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -432,11 +432,12 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
struct Scsi_Host *host;
void *dma_cmd_space;
unsigned char *clkprop;
- int proplen;
+ int proplen, rc = -ENODEV;
if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) {
- printk(KERN_ERR "mac53c94: expected 2 addrs and intrs (got %d/%d)\n",
- node->n_addrs, node->n_intrs);
+ printk(KERN_ERR "mac53c94: expected 2 addrs and intrs"
+ " (got %d/%d)\n",
+ macio_resource_count(mdev), macio_irq_count(mdev));
return -ENODEV;
}
@@ -448,6 +449,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
host = scsi_host_alloc(&mac53c94_template, sizeof(struct fsc_state));
if (host == NULL) {
printk(KERN_ERR "mac53c94: couldn't register host");
+ rc = -ENOMEM;
goto out_release;
}
@@ -486,6 +488,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
if (dma_cmd_space == 0) {
printk(KERN_ERR "mac53c94: couldn't allocate dma "
"command space for %s\n", node->full_name);
+ rc = -ENOMEM;
goto out_free;
}
state->dma_cmds = (struct dbdma_cmd *)DBDMA_ALIGN(dma_cmd_space);
@@ -495,18 +498,21 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
mac53c94_init(state);
- if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94", state)) {
+ if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94",state)) {
printk(KERN_ERR "mac53C94: can't get irq %d for %s\n",
state->intr, node->full_name);
goto out_free_dma;
}
- /* XXX FIXME: handle failure */
- scsi_add_host(host, &mdev->ofdev.dev);
- scsi_scan_host(host);
+ rc = scsi_add_host(host, &mdev->ofdev.dev);
+ if (rc != 0)
+ goto out_release_irq;
+ scsi_scan_host(host);
return 0;
+ out_release_irq:
+ free_irq(state->intr, state);
out_free_dma:
kfree(state->dma_cmd_space);
out_free:
@@ -518,7 +524,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
out_release:
macio_release_resources(mdev);
- return -ENODEV;
+ return rc;
}
static int mac53c94_remove(struct macio_dev *mdev)
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index bdccf73cf9fe..d6d2125f9044 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -1869,7 +1869,8 @@ static int mesh_probe(struct macio_dev *mdev, const struct of_device_id *match)
if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) {
printk(KERN_ERR "mesh: expected 2 addrs and 2 intrs"
- " (got %d,%d)\n", mesh->n_addrs, mesh->n_intrs);
+ " (got %d,%d)\n", macio_resource_count(mdev),
+ macio_irq_count(mdev));
return -ENODEV;
}
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 987d22b53c22..16af5626c243 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -608,7 +608,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
p = cpm2cpu_addr(bdp->cbd_bufaddr);
- *p++ = xmit->buf[xmit->tail];
+ *p++ = port->x_char;
bdp->cbd_datlen = 1;
bdp->cbd_sc |= BD_SC_READY;
/* Get next BD. */
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 5ddd8ab1f108..ea24129eb6b9 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1431,11 +1431,14 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
char name[1];
} *slots;
int len;
+ struct resource r_ports, r_rxdma, r_txdma;
/*
* Request & map chip registers
*/
- uap->port.mapbase = np->addrs[0].address;
+ if (of_address_to_resource(np, 0, &r_ports))
+ return -ENODEV;
+ uap->port.mapbase = r_ports.start;
uap->port.membase = ioremap(uap->port.mapbase, 0x1000);
uap->control_reg = uap->port.membase;
@@ -1445,16 +1448,20 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
* Request & map DBDMA registers
*/
#ifdef HAS_DBDMA
- if (np->n_addrs >= 3 && np->n_intrs >= 3)
+ if (of_address_to_resource(np, 1, &r_txdma) == 0 &&
+ of_address_to_resource(np, 2, &r_rxdma) == 0)
uap->flags |= PMACZILOG_FLAG_HAS_DMA;
+#else
+ memset(&r_txdma, 0, sizeof(struct resource));
+ memset(&r_rxdma, 0, sizeof(struct resource));
#endif
if (ZS_HAS_DMA(uap)) {
- uap->tx_dma_regs = ioremap(np->addrs[np->n_addrs - 2].address, 0x1000);
+ uap->tx_dma_regs = ioremap(r_txdma.start, 0x100);
if (uap->tx_dma_regs == NULL) {
uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
goto no_dma;
}
- uap->rx_dma_regs = ioremap(np->addrs[np->n_addrs - 1].address, 0x1000);
+ uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100);
if (uap->rx_dma_regs == NULL) {
iounmap(uap->tx_dma_regs);
uap->tx_dma_regs = NULL;
diff --git a/drivers/video/controlfb.c b/drivers/video/controlfb.c
index 403d17377f8d..03798e9c882d 100644
--- a/drivers/video/controlfb.c
+++ b/drivers/video/controlfb.c
@@ -133,12 +133,6 @@ static int controlfb_mmap(struct fb_info *info, struct file *file,
static int controlfb_set_par (struct fb_info *info);
static int controlfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info);
-/*
- * inititialization
- */
-int control_init(void);
-void control_setup(char *);
-
/******************** Prototypes for internal functions **********************/
static void set_control_clock(unsigned char *params);
@@ -550,9 +544,46 @@ static void control_set_hardware(struct fb_info_control *p, struct fb_par_contro
/*
- * Called from fbmem.c for probing & initializing
+ * Parse user speficied options (`video=controlfb:')
*/
-int __init control_init(void)
+static void __init control_setup(char *options)
+{
+ char *this_opt;
+
+ if (!options || !*options)
+ return;
+
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ if (!strncmp(this_opt, "vmode:", 6)) {
+ int vmode = simple_strtoul(this_opt+6, NULL, 0);
+ if (vmode > 0 && vmode <= VMODE_MAX &&
+ control_mac_modes[vmode - 1].m[1] >= 0)
+ default_vmode = vmode;
+ } else if (!strncmp(this_opt, "cmode:", 6)) {
+ int depth = simple_strtoul(this_opt+6, NULL, 0);
+ switch (depth) {
+ case CMODE_8:
+ case CMODE_16:
+ case CMODE_32:
+ default_cmode = depth;
+ break;
+ case 8:
+ default_cmode = CMODE_8;
+ break;
+ case 15:
+ case 16:
+ default_cmode = CMODE_16;
+ break;
+ case 24:
+ case 32:
+ default_cmode = CMODE_32;
+ break;
+ }
+ }
+ }
+}
+
+static int __init control_init(void)
{
struct device_node *dp;
char *option = NULL;
@@ -651,15 +682,16 @@ static void __init find_vram_size(struct fb_info_control *p)
static int __init control_of_init(struct device_node *dp)
{
struct fb_info_control *p;
- unsigned long addr;
- int i;
+ struct resource fb_res, reg_res;
if (control_fb) {
printk(KERN_ERR "controlfb: only one control is supported\n");
return -ENXIO;
}
- if(dp->n_addrs != 2) {
- printk(KERN_ERR "expecting 2 address for control (got %d)", dp->n_addrs);
+
+ if (of_pci_address_to_resource(dp, 2, &fb_res) ||
+ of_pci_address_to_resource(dp, 1, &reg_res)) {
+ printk(KERN_ERR "can't get 2 addresses for control\n");
return -ENXIO;
}
p = kmalloc(sizeof(*p), GFP_KERNEL);
@@ -669,18 +701,12 @@ static int __init control_of_init(struct device_node *dp)
memset(p, 0, sizeof(*p));
/* Map in frame buffer and registers */
- for (i = 0; i < dp->n_addrs; ++i) {
- addr = dp->addrs[i].address;
- if (dp->addrs[i].size >= 0x800000) {
- p->fb_orig_base = addr;
- p->fb_orig_size = dp->addrs[i].size;
- /* use the big-endian aperture (??) */
- p->frame_buffer_phys = addr + 0x800000;
- } else {
- p->control_regs_phys = addr;
- p->control_regs_size = dp->addrs[i].size;
- }
- }
+ p->fb_orig_base = fb_res.start;
+ p->fb_orig_size = fb_res.end - fb_res.start + 1;
+ /* use the big-endian aperture (??) */
+ p->frame_buffer_phys = fb_res.start + 0x800000;
+ p->control_regs_phys = reg_res.start;
+ p->control_regs_size = reg_res.end - reg_res.start + 1;
if (!p->fb_orig_base ||
!request_mem_region(p->fb_orig_base,p->fb_orig_size,"controlfb")) {
@@ -1059,43 +1085,3 @@ static void control_cleanup(void)
}
-/*
- * Parse user speficied options (`video=controlfb:')
- */
-void __init control_setup(char *options)
-{
- char *this_opt;
-
- if (!options || !*options)
- return;
-
- while ((this_opt = strsep(&options, ",")) != NULL) {
- if (!strncmp(this_opt, "vmode:", 6)) {
- int vmode = simple_strtoul(this_opt+6, NULL, 0);
- if (vmode > 0 && vmode <= VMODE_MAX &&
- control_mac_modes[vmode - 1].m[1] >= 0)
- default_vmode = vmode;
- } else if (!strncmp(this_opt, "cmode:", 6)) {
- int depth = simple_strtoul(this_opt+6, NULL, 0);
- switch (depth) {
- case CMODE_8:
- case CMODE_16:
- case CMODE_32:
- default_cmode = depth;
- break;
- case 8:
- default_cmode = CMODE_8;
- break;
- case 15:
- case 16:
- default_cmode = CMODE_16;
- break;
- case 24:
- case 32:
- default_cmode = CMODE_32;
- break;
- }
- }
- }
-}
-
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index 00d87f5bb7be..ad1434e3f227 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -223,6 +223,7 @@ static int offb_blank(int blank, struct fb_info *info)
int __init offb_init(void)
{
struct device_node *dp = NULL, *boot_disp = NULL;
+
#if defined(CONFIG_BOOTX_TEXT) && defined(CONFIG_PPC32)
struct device_node *macos_display = NULL;
#endif
@@ -234,60 +235,54 @@ int __init offb_init(void)
if (boot_infos != 0) {
unsigned long addr =
(unsigned long) boot_infos->dispDeviceBase;
+ u32 *addrp;
+ u64 daddr, dsize;
+ unsigned int flags;
+
/* find the device node corresponding to the macos display */
while ((dp = of_find_node_by_type(dp, "display"))) {
int i;
- /*
- * Grrr... It looks like the MacOS ATI driver
- * munges the assigned-addresses property (but
- * the AAPL,address value is OK).
- */
- if (strncmp(dp->name, "ATY,", 4) == 0
- && dp->n_addrs == 1) {
- unsigned int *ap =
- (unsigned int *) get_property(dp,
- "AAPL,address",
- NULL);
- if (ap != NULL) {
- dp->addrs[0].address = *ap;
- dp->addrs[0].size = 0x01000000;
- }
- }
/*
- * The LTPro on the Lombard powerbook has no addresses
- * on the display nodes, they are on their parent.
+ * Look for an AAPL,address property first.
*/
- if (dp->n_addrs == 0
- && device_is_compatible(dp, "ATY,264LTPro")) {
- int na;
- unsigned int *ap = (unsigned int *)
- get_property(dp, "AAPL,address", &na);
- if (ap != 0)
- for (na /= sizeof(unsigned int);
- na > 0; --na, ++ap)
- if (*ap <= addr
- && addr <
- *ap + 0x1000000)
- goto foundit;
+ unsigned int na;
+ unsigned int *ap =
+ (unsigned int *)get_property(dp, "AAPL,address",
+ &na);
+ if (ap != 0) {
+ for (na /= sizeof(unsigned int); na > 0;
+ --na, ++ap)
+ if (*ap <= addr &&
+ addr < *ap + 0x1000000) {
+ macos_display = dp;
+ goto foundit;
+ }
}
/*
* See if the display address is in one of the address
* ranges for this display.
*/
- for (i = 0; i < dp->n_addrs; ++i) {
- if (dp->addrs[i].address <= addr
- && addr <
- dp->addrs[i].address +
- dp->addrs[i].size)
+ i = 0;
+ for (;;) {
+ addrp = of_get_address(dp, i++, &dsize, &flags);
+ if (addrp == NULL)
break;
+ if (!(flags & IORESOURCE_MEM))
+ continue;
+ daddr = of_translate_address(dp, addrp);
+ if (daddr == OF_BAD_ADDR)
+ continue;
+ if (daddr <= addr && addr < (daddr + dsize)) {
+ macos_display = dp;
+ goto foundit;
+ }
}
- if (i < dp->n_addrs) {
- foundit:
+ foundit:
+ if (macos_display) {
printk(KERN_INFO "MacOS display is %s\n",
dp->full_name);
- macos_display = dp;
break;
}
}
@@ -326,8 +321,10 @@ static void __init offb_init_nodriver(struct device_node *dp)
int *pp, i;
unsigned int len;
int width = 640, height = 480, depth = 8, pitch;
- unsigned int rsize, *up;
- unsigned long address = 0;
+ unsigned int flags, rsize, *up;
+ u64 address = OF_BAD_ADDR;
+ u32 *addrp;
+ u64 asize;
if ((pp = (int *) get_property(dp, "depth", &len)) != NULL
&& len == sizeof(int))
@@ -363,7 +360,7 @@ static void __init offb_init_nodriver(struct device_node *dp)
break;
}
if (pdev) {
- for (i = 0; i < 6 && address == 0; i++) {
+ for (i = 0; i < 6 && address == OF_BAD_ADDR; i++) {
if ((pci_resource_flags(pdev, i) &
IORESOURCE_MEM) &&
(pci_resource_len(pdev, i) >= rsize))
@@ -374,27 +371,33 @@ static void __init offb_init_nodriver(struct device_node *dp)
}
#endif /* CONFIG_PCI */
- if (address == 0 &&
- (up = (unsigned *) get_property(dp, "address", &len)) != NULL &&
- len == sizeof(unsigned))
- address = (u_long) * up;
- if (address == 0) {
- for (i = 0; i < dp->n_addrs; ++i)
- if (dp->addrs[i].size >=
- pitch * height * depth / 8)
- break;
- if (i >= dp->n_addrs) {
+ /* This one is dodgy, we may drop it ... */
+ if (address == OF_BAD_ADDR &&
+ (up = (unsigned *) get_property(dp, "address", &len)) != NULL &&
+ len == sizeof(unsigned int))
+ address = (u64) * up;
+
+ if (address == OF_BAD_ADDR) {
+ for (i = 0; (addrp = of_get_address(dp, i, &asize, &flags))
+ != NULL; i++) {
+ if (!(flags & IORESOURCE_MEM))
+ continue;
+ if (asize >= pitch * height * depth / 8)
+ break;
+ }
+ if (addrp == NULL) {
printk(KERN_ERR
"no framebuffer address found for %s\n",
dp->full_name);
return;
}
-
- address = (u_long) dp->addrs[i].address;
-
-#ifdef CONFIG_PPC64
- address += ((struct pci_dn *)dp->data)->phb->pci_mem_offset;
-#endif
+ address = of_translate_address(dp, addrp);
+ if (address == OF_BAD_ADDR) {
+ printk(KERN_ERR
+ "can't translate framebuffer address for %s\n",
+ dp->full_name);
+ return;
+ }
/* kludge for valkyrie */
if (strcmp(dp->name, "valkyrie") == 0)
@@ -459,7 +462,9 @@ static void __init offb_init_fb(const char *name, const char *full_name,
par->cmap_type = cmap_unknown;
if (depth == 8) {
- /* XXX kludge for ati */
+
+ /* Palette hacks disabled for now */
+#if 0
if (dp && !strncmp(name, "ATY,Rage128", 11)) {
unsigned long regbase = dp->addrs[2].address;
par->cmap_adr = ioremap(regbase, 0x1FFF);
@@ -490,6 +495,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
par->cmap_adr = ioremap(regbase + 0x6000, 0x1000);
par->cmap_type = cmap_gxt2000;
}
+#endif
fix->visual = par->cmap_adr ? FB_VISUAL_PSEUDOCOLOR
: FB_VISUAL_STATIC_PSEUDOCOLOR;
} else
diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c
index ca4082ae5a18..335e37465559 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/platinumfb.c
@@ -69,6 +69,8 @@ struct fb_info_platinum {
unsigned long total_vram;
int clktype;
int dactype;
+
+ struct resource rsrc_fb, rsrc_reg;
};
/*
@@ -97,9 +99,6 @@ static int platinum_var_to_par(struct fb_var_screeninfo *var,
* Interface used by the world
*/
-int platinumfb_init(void);
-int platinumfb_setup(char*);
-
static struct fb_ops platinumfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = platinumfb_check_var,
@@ -138,13 +137,15 @@ static int platinumfb_set_par (struct fb_info *info)
init = platinum_reg_init[pinfo->vmode-1];
- if (pinfo->vmode == 13 && pinfo->cmode > 0)
- offset = 0x10;
+ if ((pinfo->vmode == VMODE_832_624_75) && (pinfo->cmode > CMODE_8))
+ offset = 0x10;
+
info->screen_base = pinfo->frame_buffer + init->fb_offset + offset;
info->fix.smem_start = (pinfo->frame_buffer_phys) + init->fb_offset + offset;
info->fix.visual = (pinfo->cmode == CMODE_8) ?
FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
- info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode) + offset;
+ info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode)
+ + offset;
printk("line_length: %x\n", info->fix.line_length);
return 0;
}
@@ -221,7 +222,9 @@ static int platinumfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
static inline int platinum_vram_reqd(int video_mode, int color_mode)
{
return vmode_attrs[video_mode-1].vres *
- (vmode_attrs[video_mode-1].hres * (1<<color_mode) + 0x20) +0x1000;
+ (vmode_attrs[video_mode-1].hres * (1<<color_mode) +
+ ((video_mode == VMODE_832_624_75) &&
+ (color_mode > CMODE_8)) ? 0x10 : 0x20) + 0x1000;
}
#define STORE_D2(a, d) { \
@@ -481,7 +484,7 @@ static int platinum_var_to_par(struct fb_var_screeninfo *var,
/*
* Parse user speficied options (`video=platinumfb:')
*/
-int __init platinumfb_setup(char *options)
+static int __init platinumfb_setup(char *options)
{
char *this_opt;
@@ -522,19 +525,15 @@ int __init platinumfb_setup(char *options)
#define invalidate_cache(addr)
#endif
-static int __devinit platinumfb_probe(struct of_device* odev, const struct of_device_id *match)
+static int __devinit platinumfb_probe(struct of_device* odev,
+ const struct of_device_id *match)
{
struct device_node *dp = odev->node;
struct fb_info *info;
struct fb_info_platinum *pinfo;
- unsigned long addr, size;
volatile __u8 *fbuffer;
- int i, bank0, bank1, bank2, bank3, rc;
+ int bank0, bank1, bank2, bank3, rc;
- if (dp->n_addrs != 2) {
- printk(KERN_ERR "expecting 2 address for platinum (got %d)", dp->n_addrs);
- return -ENXIO;
- }
printk(KERN_INFO "platinumfb: Found Apple Platinum video hardware\n");
info = framebuffer_alloc(sizeof(*pinfo), &odev->dev);
@@ -542,26 +541,39 @@ static int __devinit platinumfb_probe(struct of_device* odev, const struct of_de
return -ENOMEM;
pinfo = info->par;
- /* Map in frame buffer and registers */
- for (i = 0; i < dp->n_addrs; ++i) {
- addr = dp->addrs[i].address;
- size = dp->addrs[i].size;
- /* Let's assume we can request either all or nothing */
- if (!request_mem_region(addr, size, "platinumfb")) {
- framebuffer_release(info);
- return -ENXIO;
- }
- if (size >= 0x400000) {
- /* frame buffer - map only 4MB */
- pinfo->frame_buffer_phys = addr;
- pinfo->frame_buffer = __ioremap(addr, 0x400000, _PAGE_WRITETHRU);
- pinfo->base_frame_buffer = pinfo->frame_buffer;
- } else {
- /* registers */
- pinfo->platinum_regs_phys = addr;
- pinfo->platinum_regs = ioremap(addr, size);
- }
+ if (of_address_to_resource(dp, 0, &pinfo->rsrc_reg) ||
+ of_address_to_resource(dp, 1, &pinfo->rsrc_fb)) {
+ printk(KERN_ERR "platinumfb: Can't get resources\n");
+ framebuffer_release(info);
+ return -ENXIO;
}
+ if (!request_mem_region(pinfo->rsrc_reg.start,
+ pinfo->rsrc_reg.start -
+ pinfo->rsrc_reg.end + 1,
+ "platinumfb registers")) {
+ framebuffer_release(info);
+ return -ENXIO;
+ }
+ if (!request_mem_region(pinfo->rsrc_fb.start,
+ pinfo->rsrc_fb.start
+ - pinfo->rsrc_fb.end + 1,
+ "platinumfb framebuffer")) {
+ release_mem_region(pinfo->rsrc_reg.start,
+ pinfo->rsrc_reg.end -
+ pinfo->rsrc_reg.start + 1);
+ framebuffer_release(info);
+ return -ENXIO;
+ }
+
+ /* frame buffer - map only 4MB */
+ pinfo->frame_buffer_phys = pinfo->rsrc_fb.start;
+ pinfo->frame_buffer = __ioremap(pinfo->rsrc_fb.start, 0x400000,
+ _PAGE_WRITETHRU);
+ pinfo->base_frame_buffer = pinfo->frame_buffer;
+
+ /* registers */
+ pinfo->platinum_regs_phys = pinfo->rsrc_reg.start;
+ pinfo->platinum_regs = ioremap(pinfo->rsrc_reg.start, 0x1000);
pinfo->cmap_regs_phys = 0xf301b000; /* XXX not in prom? */
request_mem_region(pinfo->cmap_regs_phys, 0x1000, "platinumfb cmap");
@@ -624,18 +636,16 @@ static int __devexit platinumfb_remove(struct of_device* odev)
{
struct fb_info *info = dev_get_drvdata(&odev->dev);
struct fb_info_platinum *pinfo = info->par;
- struct device_node *dp = odev->node;
- unsigned long addr, size;
- int i;
unregister_framebuffer (info);
/* Unmap frame buffer and registers */
- for (i = 0; i < dp->n_addrs; ++i) {
- addr = dp->addrs[i].address;
- size = dp->addrs[i].size;
- release_mem_region(addr, size);
- }
+ release_mem_region(pinfo->rsrc_fb.start,
+ pinfo->rsrc_fb.end -
+ pinfo->rsrc_fb.start + 1);
+ release_mem_region(pinfo->rsrc_reg.start,
+ pinfo->rsrc_reg.end -
+ pinfo->rsrc_reg.start + 1);
iounmap(pinfo->frame_buffer);
iounmap(pinfo->platinum_regs);
release_mem_region(pinfo->cmap_regs_phys, 0x1000);
@@ -662,7 +672,7 @@ static struct of_platform_driver platinum_driver =
.remove = platinumfb_remove,
};
-int __init platinumfb_init(void)
+static int __init platinumfb_init(void)
{
#ifndef MODULE
char *option = NULL;
@@ -676,7 +686,7 @@ int __init platinumfb_init(void)
return 0;
}
-void __exit platinumfb_exit(void)
+static void __exit platinumfb_exit(void)
{
of_unregister_driver(&platinum_driver);
}
diff --git a/drivers/video/platinumfb.h b/drivers/video/platinumfb.h
index 2834fc1c344b..f6bd77cafd17 100644
--- a/drivers/video/platinumfb.h
+++ b/drivers/video/platinumfb.h
@@ -158,7 +158,9 @@ static struct platinum_regvals platinum_reg_init_14 = {
/* 832x624, 75Hz (13) */
static struct platinum_regvals platinum_reg_init_13 = {
0x70,
- { 864, 1680, 3360 }, /* MacOS does 1680 instead of 1696 to fit 16bpp in 1MB */
+ { 864, 1680, 3344 }, /* MacOS does 1680 instead of 1696 to fit 16bpp in 1MB,
+ * and we use 3344 instead of 3360 to fit in 2Mb
+ */
{ 0xff0, 4, 0, 0, 0, 0, 0x299, 0,
0, 0x21e, 0x120, 0x10, 0x23f, 0x1f, 0x25, 0x37,
0x8a, 0x22a, 0x23e, 0x536, 0x534, 4, 9, 0x52,
diff --git a/drivers/video/valkyriefb.c b/drivers/video/valkyriefb.c
index ce97ec8eae97..2bdeb4baa952 100644
--- a/drivers/video/valkyriefb.c
+++ b/drivers/video/valkyriefb.c
@@ -342,19 +342,19 @@ int __init valkyriefb_init(void)
#else /* ppc (!CONFIG_MAC) */
{
struct device_node *dp;
+ struct resource r;
- dp = find_devices("valkyrie");
+ dp = of_find_node_by_name(NULL, "valkyrie");
if (dp == 0)
return 0;
- if (dp->n_addrs != 1) {
- printk(KERN_ERR "expecting 1 address for valkyrie (got %d)\n",
- dp->n_addrs);
+ if (of_address_to_resource(dp, 0, &r)) {
+ printk(KERN_ERR "can't find address for valkyrie\n");
return 0;
}
- frame_buffer_phys = dp->addrs[0].address;
- cmap_regs_phys = dp->addrs[0].address+0x304000;
+ frame_buffer_phys = r.start;
+ cmap_regs_phys = r.start + 0x304000;
flags = _PAGE_WRITETHRU;
}
#endif /* ppc (!CONFIG_MAC) */