Merge tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull more ARM SoC updates from Arnd Bergmann:
 "These are changes that for some reason ended up not making it into the
  first four branches but that should still make it into 6.9:

   - A rework of the omap clock support that touches both drivers and
     device tree files

   - The reset controller branch changes that had a dependency on late
     bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
     drivers branch

   - The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
     changes that got delayed and needed some extra time in linux-next
     for wider testing"

* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
  soc: fsl: dpio: fix kcalloc() argument order
  bus: ts-nbus: Improve error reporting
  bus: ts-nbus: Convert to atomic pwm API
  riscv: dts: starfive: jh7110: Add camera subsystem nodes
  ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
  ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
  ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
  clk: ti: Improve clksel clock bit parsing for reg property
  clk: ti: Handle possible address in the node name
  dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
  dt-bindings: riscv: cpus: reg matches hart ID
  reset: Instantiate reset GPIO controller for shared reset-gpios
  reset: gpio: Add GPIO-based reset controller
  cpufreq: do not open-code of_phandle_args_equal()
  of: Add of_phandle_args_equal() helper
  reset: simple: add support for Sophgo SG2042
  dt-bindings: reset: sophgo: support SG2042
  riscv: dts: microchip: add specific compatible for mpfs pdma
  riscv: dts: microchip: add missing CAN bus clocks
  ARM: brcmstb: Add debug UART entry for 74165
  ...

15 files changed, 464 insertions, 99 deletions

diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index b6dfe4340da2..65ae758f3194 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -96,6 +96,20 @@ static const int gisb_offsets_bcm7400[] = {
 	[ARB_ERR_CAP_MASTER]	= 0x0d8,
 };
 
+static const int gisb_offsets_bcm74165[] = {
+	[ARB_TIMER]		= 0x008,
+	[ARB_BP_CAP_CLR]	= 0x044,
+	[ARB_BP_CAP_HI_ADDR]	= -1,
+	[ARB_BP_CAP_ADDR]	= 0x048,
+	[ARB_BP_CAP_STATUS]	= 0x058,
+	[ARB_BP_CAP_MASTER]	= 0x05c,
+	[ARB_ERR_CAP_CLR]	= 0x038,
+	[ARB_ERR_CAP_HI_ADDR]	= -1,
+	[ARB_ERR_CAP_ADDR]	= 0x020,
+	[ARB_ERR_CAP_STATUS]	= 0x030,
+	[ARB_ERR_CAP_MASTER]	= 0x034,
+};
+
 static const int gisb_offsets_bcm7435[] = {
 	[ARB_TIMER]		= 0x00c,
 	[ARB_BP_CAP_CLR]	= 0x014,
@@ -393,6 +407,7 @@ static const struct of_device_id brcmstb_gisb_arb_of_match[] = {
 	{ .compatible = "brcm,bcm7400-gisb-arb", .data = gisb_offsets_bcm7400 },
 	{ .compatible = "brcm,bcm7278-gisb-arb", .data = gisb_offsets_bcm7278 },
 	{ .compatible = "brcm,bcm7038-gisb-arb", .data = gisb_offsets_bcm7038 },
+	{ .compatible = "brcm,bcm74165-gisb-arb", .data = gisb_offsets_bcm74165 },
 	{ },
 };
 
diff --git a/drivers/bus/ts-nbus.c b/drivers/bus/ts-nbus.c
index 4fa932cb0915..baf22a82c47a 100644
--- a/drivers/bus/ts-nbus.c
+++ b/drivers/bus/ts-nbus.c
@@ -39,45 +39,39 @@ struct ts_nbus {
 /*
  * request all gpios required by the bus.
  */
-static int ts_nbus_init_pdata(struct platform_device *pdev, struct ts_nbus
-		*ts_nbus)
+static int ts_nbus_init_pdata(struct platform_device *pdev,
+			      struct ts_nbus *ts_nbus)
 {
 	ts_nbus->data = devm_gpiod_get_array(&pdev->dev, "ts,data",
 			GPIOD_OUT_HIGH);
-	if (IS_ERR(ts_nbus->data)) {
-		dev_err(&pdev->dev, "failed to retrieve ts,data-gpio from dts\n");
-		return PTR_ERR(ts_nbus->data);
-	}
+	if (IS_ERR(ts_nbus->data))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->data),
+				     "failed to retrieve ts,data-gpio from dts\n");
 
 	ts_nbus->csn = devm_gpiod_get(&pdev->dev, "ts,csn", GPIOD_OUT_HIGH);
-	if (IS_ERR(ts_nbus->csn)) {
-		dev_err(&pdev->dev, "failed to retrieve ts,csn-gpio from dts\n");
-		return PTR_ERR(ts_nbus->csn);
-	}
+	if (IS_ERR(ts_nbus->csn))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->csn),
+			      "failed to retrieve ts,csn-gpio from dts\n");
 
 	ts_nbus->txrx = devm_gpiod_get(&pdev->dev, "ts,txrx", GPIOD_OUT_HIGH);
-	if (IS_ERR(ts_nbus->txrx)) {
-		dev_err(&pdev->dev, "failed to retrieve ts,txrx-gpio from dts\n");
-		return PTR_ERR(ts_nbus->txrx);
-	}
+	if (IS_ERR(ts_nbus->txrx))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->txrx),
+				     "failed to retrieve ts,txrx-gpio from dts\n");
 
 	ts_nbus->strobe = devm_gpiod_get(&pdev->dev, "ts,strobe", GPIOD_OUT_HIGH);
-	if (IS_ERR(ts_nbus->strobe)) {
-		dev_err(&pdev->dev, "failed to retrieve ts,strobe-gpio from dts\n");
-		return PTR_ERR(ts_nbus->strobe);
-	}
+	if (IS_ERR(ts_nbus->strobe))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->strobe),
+				     "failed to retrieve ts,strobe-gpio from dts\n");
 
 	ts_nbus->ale = devm_gpiod_get(&pdev->dev, "ts,ale", GPIOD_OUT_HIGH);
-	if (IS_ERR(ts_nbus->ale)) {
-		dev_err(&pdev->dev, "failed to retrieve ts,ale-gpio from dts\n");
-		return PTR_ERR(ts_nbus->ale);
-	}
+	if (IS_ERR(ts_nbus->ale))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->ale),
+				     "failed to retrieve ts,ale-gpio from dts\n");
 
 	ts_nbus->rdy = devm_gpiod_get(&pdev->dev, "ts,rdy", GPIOD_IN);
-	if (IS_ERR(ts_nbus->rdy)) {
-		dev_err(&pdev->dev, "failed to retrieve ts,rdy-gpio from dts\n");
-		return PTR_ERR(ts_nbus->rdy);
-	}
+	if (IS_ERR(ts_nbus->rdy))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->rdy),
+				     "failed to retrieve ts,rdy-gpio from dts\n");
 
 	return 0;
 }
@@ -273,7 +267,7 @@ EXPORT_SYMBOL_GPL(ts_nbus_write);
 static int ts_nbus_probe(struct platform_device *pdev)
 {
 	struct pwm_device *pwm;
-	struct pwm_args pargs;
+	struct pwm_state state;
 	struct device *dev = &pdev->dev;
 	struct ts_nbus *ts_nbus;
 	int ret;
@@ -289,32 +283,24 @@ static int ts_nbus_probe(struct platform_device *pdev)
 		return ret;
 
 	pwm = devm_pwm_get(dev, NULL);
-	if (IS_ERR(pwm)) {
-		ret = PTR_ERR(pwm);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "unable to request PWM\n");
-		return ret;
-	}
+	if (IS_ERR(pwm))
+		return dev_err_probe(dev, PTR_ERR(pwm),
+				     "unable to request PWM\n");
 
-	pwm_get_args(pwm, &pargs);
-	if (!pargs.period) {
-		dev_err(&pdev->dev, "invalid PWM period\n");
-		return -EINVAL;
-	}
+	pwm_init_state(pwm, &state);
+	if (!state.period)
+		return dev_err_probe(dev, -EINVAL, "invalid PWM period\n");
 
-	/*
-	 * FIXME: pwm_apply_args() should be removed when switching to
-	 * the atomic PWM API.
-	 */
-	pwm_apply_args(pwm);
-	ret = pwm_config(pwm, pargs.period, pargs.period);
+	state.duty_cycle = state.period;
+	state.enabled = true;
+
+	ret = pwm_apply_state(pwm, &state);
 	if (ret < 0)
-		return ret;
+		return dev_err_probe(dev, ret, "failed to configure PWM\n");
 
 	/*
 	 * we can now start the FPGA and populate the peripherals.
 	 */
-	pwm_enable(pwm);
 	ts_nbus->pwm = pwm;
 
 	/*
@@ -324,7 +310,8 @@ static int ts_nbus_probe(struct platform_device *pdev)
 
 	ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
 	if (ret < 0)
-		return ret;
+		return dev_err_probe(dev, ret,
+				     "failed to populate platform devices on bus\n");
 
 	dev_info(dev, "initialized\n");
 
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index 93183287c58d..43514e6f3b78 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -376,14 +376,9 @@ static void __init of_omap2_apll_setup(struct device_node *node)
 	}
 	clk_hw->fixed_rate = val;
 
-	if (of_property_read_u32(node, "ti,bit-shift", &val)) {
-		pr_err("%pOFn missing bit-shift\n", node);
-		goto cleanup;
-	}
-
-	clk_hw->enable_bit = val;
-	ad->enable_mask = 0x3 << val;
-	ad->autoidle_mask = 0x3 << val;
+	clk_hw->enable_bit = ti_clk_get_legacy_bit_shift(node);
+	ad->enable_mask = 0x3 << clk_hw->enable_bit;
+	ad->autoidle_mask = 0x3 << clk_hw->enable_bit;
 
 	if (of_property_read_u32(node, "ti,idlest-shift", &val)) {
 		pr_err("%pOFn missing idlest-shift\n", node);
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 1862958ab412..f2117fef7c7d 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -7,6 +7,7 @@
  * Tero Kristo <t-kristo@ti.com>
  */
 
+#include <linux/cleanup.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
@@ -15,6 +16,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/list.h>
+#include <linux/minmax.h>
 #include <linux/regmap.h>
 #include <linux/string_helpers.h>
 #include <linux/memblock.h>
@@ -114,20 +116,26 @@ int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
 
 /*
  * Eventually we could standardize to using '_' for clk-*.c files to follow the
- * TRM naming and leave out the tmp name here.
+ * TRM naming.
  */
 static struct device_node *ti_find_clock_provider(struct device_node *from,
 						  const char *name)
 {
+	char *tmp __free(kfree) = NULL;
 	struct device_node *np;
 	bool found = false;
 	const char *n;
-	char *tmp;
+	char *p;
 
 	tmp = kstrdup_and_replace(name, '-', '_', GFP_KERNEL);
 	if (!tmp)
 		return NULL;
 
+	/* Ignore a possible address for the node name */
+	p = strchr(tmp, '@');
+	if (p)
+		*p = '\0';
+
 	/* Node named "clock" with "clock-output-names" */
 	for_each_of_allnodes_from(from, np) {
 		if (of_property_read_string_index(np, "clock-output-names",
@@ -140,7 +148,6 @@ static struct device_node *ti_find_clock_provider(struct device_node *from,
 			break;
 		}
 	}
-	kfree(tmp);
 
 	if (found) {
 		of_node_put(from);
@@ -148,7 +155,7 @@ static struct device_node *ti_find_clock_provider(struct device_node *from,
 	}
 
 	/* Fall back to using old node name base provider name */
-	return of_find_node_by_name(from, name);
+	return of_find_node_by_name(from, tmp);
 }
 
 /**
@@ -301,8 +308,9 @@ int __init ti_clk_retry_init(struct device_node *node, void *user,
 int ti_clk_get_reg_addr(struct device_node *node, int index,
 			struct clk_omap_reg *reg)
 {
-	u32 val;
-	int i;
+	u32 clksel_addr, val;
+	bool is_clksel = false;
+	int i, err;
 
 	for (i = 0; i < CLK_MAX_MEMMAPS; i++) {
 		if (clocks_node_ptr[i] == node->parent)
@@ -318,21 +326,62 @@ int ti_clk_get_reg_addr(struct device_node *node, int index,
 
 	reg->index = i;
 
-	if (of_property_read_u32_index(node, "reg", index, &val)) {
-		if (of_property_read_u32_index(node->parent, "reg",
-					       index, &val)) {
-			pr_err("%pOFn or parent must have reg[%d]!\n",
-			       node, index);
+	if (of_device_is_compatible(node->parent, "ti,clksel")) {
+		err = of_property_read_u32_index(node->parent, "reg", index, &clksel_addr);
+		if (err) {
+			pr_err("%pOFn parent clksel must have reg[%d]!\n", node, index);
 			return -EINVAL;
 		}
+		is_clksel = true;
 	}
 
+	err = of_property_read_u32_index(node, "reg", index, &val);
+	if (err && is_clksel) {
+		/* Legacy clksel with no reg and a possible ti,bit-shift property */
+		reg->offset = clksel_addr;
+		reg->bit = ti_clk_get_legacy_bit_shift(node);
+		reg->ptr = NULL;
+
+		return 0;
+	}
+
+	/* Updated clksel clock with a proper reg property */
+	if (is_clksel) {
+		reg->offset = clksel_addr;
+		reg->bit = val;
+		reg->ptr = NULL;
+		return 0;
+	}
+
+	/* Other clocks that may or may not have ti,bit-shift property  */
 	reg->offset = val;
+	reg->bit = ti_clk_get_legacy_bit_shift(node);
 	reg->ptr = NULL;
 
 	return 0;
 }
 
+/**
+ * ti_clk_get_legacy_bit_shift - get bit shift for a clock register
+ * @node: device node for the clock
+ *
+ * Gets the clock register bit shift using the legacy ti,bit-shift
+ * property. Only needed for legacy clock, and can be eventually
+ * dropped once all the composite clocks use a clksel node with a
+ * proper reg property.
+ */
+int ti_clk_get_legacy_bit_shift(struct device_node *node)
+{
+	int err;
+	u32 val;
+
+	err = of_property_read_u32(node, "ti,bit-shift", &val);
+	if (!err && in_range(val, 0, 32))
+		return val;
+
+	return 0;
+}
+
 void ti_clk_latch(struct clk_omap_reg *reg, s8 shift)
 {
 	u32 latch;
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 16a9f7c2280a..2de7acea1ea0 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -216,6 +216,7 @@ int ti_clk_parse_divider_data(int *div_table, int num_dividers, int max_div,
 
 int ti_clk_get_reg_addr(struct device_node *node, int index,
 			struct clk_omap_reg *reg);
+int ti_clk_get_legacy_bit_shift(struct device_node *node);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 int ti_clk_retry_init(struct device_node *node, void *user,
 		      ti_of_clk_init_cb_t func);
diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
index 5d5bb123ba94..ade99ab6cfa9 100644
--- a/drivers/clk/ti/divider.c
+++ b/drivers/clk/ti/divider.c
@@ -477,10 +477,7 @@ static int __init ti_clk_divider_populate(struct device_node *node,
 	if (ret)
 		return ret;
 
-	if (!of_property_read_u32(node, "ti,bit-shift", &val))
-		div->shift = val;
-	else
-		div->shift = 0;
+	div->shift = div->reg.bit;
 
 	if (!of_property_read_u32(node, "ti,latch-bit", &val))
 		div->latch = val;
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
index 8e477d50d0fd..a9febd6356b8 100644
--- a/drivers/clk/ti/gate.c
+++ b/drivers/clk/ti/gate.c
@@ -132,7 +132,6 @@ static void __init _of_ti_gate_clk_setup(struct device_node *node,
 	struct clk_omap_reg reg;
 	const char *name;
 	u8 enable_bit = 0;
-	u32 val;
 	u32 flags = 0;
 	u8 clk_gate_flags = 0;
 
@@ -140,8 +139,7 @@ static void __init _of_ti_gate_clk_setup(struct device_node *node,
 		if (ti_clk_get_reg_addr(node, 0, &reg))
 			return;
 
-		if (!of_property_read_u32(node, "ti,bit-shift", &val))
-			enable_bit = val;
+		enable_bit = reg.bit;
 	}
 
 	if (of_clk_get_parent_count(node) != 1) {
@@ -170,7 +168,6 @@ _of_ti_composite_gate_clk_setup(struct device_node *node,
 				const struct clk_hw_omap_ops *hw_ops)
 {
 	struct clk_hw_omap *gate;
-	u32 val = 0;
 
 	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
 	if (!gate)
@@ -179,9 +176,7 @@ _of_ti_composite_gate_clk_setup(struct device_node *node,
 	if (ti_clk_get_reg_addr(node, 0, &gate->enable_reg))
 		goto cleanup;
 
-	of_property_read_u32(node, "ti,bit-shift", &val);
-
-	gate->enable_bit = val;
+	gate->enable_bit = gate->enable_reg.bit;
 	gate->ops = hw_ops;
 
 	if (!ti_clk_add_component(node, &gate->hw, CLK_COMPONENT_TYPE_GATE))
diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c
index 172301c646f8..3eb35c87c0ed 100644
--- a/drivers/clk/ti/interface.c
+++ b/drivers/clk/ti/interface.c
@@ -66,13 +66,11 @@ static void __init _of_ti_interface_clk_setup(struct device_node *node,
 	struct clk_omap_reg reg;
 	u8 enable_bit = 0;
 	const char *name;
-	u32 val;
 
 	if (ti_clk_get_reg_addr(node, 0, &reg))
 		return;
 
-	if (!of_property_read_u32(node, "ti,bit-shift", &val))
-		enable_bit = val;
+	enable_bit = reg.bit;
 
 	parent_name = of_clk_get_parent_name(node, 0);
 	if (!parent_name) {
diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c
index 1ebafa386be6..216d85d6aac6 100644
--- a/drivers/clk/ti/mux.c
+++ b/drivers/clk/ti/mux.c
@@ -189,7 +189,7 @@ static void of_mux_clk_setup(struct device_node *node)
 	if (ti_clk_get_reg_addr(node, 0, &reg))
 		goto cleanup;
 
-	of_property_read_u32(node, "ti,bit-shift", &shift);
+	shift = reg.bit;
 
 	of_property_read_u32(node, "ti,latch-bit", &latch);
 
@@ -252,7 +252,6 @@ static void __init of_ti_composite_mux_clk_setup(struct device_node *node)
 {
 	struct clk_omap_mux *mux;
 	unsigned int num_parents;
-	u32 val;
 
 	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
 	if (!mux)
@@ -261,8 +260,7 @@ static void __init of_ti_composite_mux_clk_setup(struct device_node *node)
 	if (ti_clk_get_reg_addr(node, 0, &mux->reg))
 		goto cleanup;
 
-	if (!of_property_read_u32(node, "ti,bit-shift", &val))
-		mux->shift = val;
+	mux->shift = mux->reg.bit;
 
 	if (of_property_read_bool(node, "ti,index-starts-at-one"))
 		mux->flags |= CLK_MUX_INDEX_ONE;
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index ccd59ddd7610..85b27c42cf65 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -66,6 +66,15 @@ config RESET_BRCMSTB_RESCAL
 	  This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on
 	  BCM7216.
 
+config RESET_GPIO
+	tristate "GPIO reset controller"
+	help
+	  This enables a generic reset controller for resets attached via
+	  GPIOs.  Typically for OF platforms this driver expects "reset-gpios"
+	  property.
+
+	  If compiled as module, it will be called reset-gpio.
+
 config RESET_HSDK
 	bool "Synopsys HSDK Reset Driver"
 	depends on HAS_IOMEM
@@ -213,7 +222,7 @@ config RESET_SCMI
 
 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
-	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
+	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_SOPHGO || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
 	depends on HAS_IOMEM
 	help
 	  This enables a simple reset controller driver for reset lines that
@@ -228,6 +237,7 @@ config RESET_SIMPLE
 	   - RCC reset controller in STM32 MCUs
 	   - Allwinner SoCs
 	   - SiFive FU740 SoCs
+	   - Sophgo SoCs
 
 config RESET_SOCFPGA
 	bool "SoCFPGA Reset Driver" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA)
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 8270da8a4baa..fd8b49fa46fc 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_RESET_BCM6345) += reset-bcm6345.o
 obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
 obj-$(CONFIG_RESET_BRCMSTB) += reset-brcmstb.o
 obj-$(CONFIG_RESET_BRCMSTB_RESCAL) += reset-brcmstb-rescal.o
+obj-$(CONFIG_RESET_GPIO) += reset-gpio.o
 obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o
 obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
 obj-$(CONFIG_RESET_INTEL_GW) += reset-intel-gw.o
diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index 4d5a78d3c085..dba74e857be6 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -5,14 +5,19 @@
  * Copyright 2013 Philipp Zabel, Pengutronix
  */
 #include <linux/atomic.h>
+#include <linux/cleanup.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/kref.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/idr.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/acpi.h>
+#include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/reset-controller.h>
 #include <linux/slab.h>
@@ -23,6 +28,11 @@ static LIST_HEAD(reset_controller_list);
 static DEFINE_MUTEX(reset_lookup_mutex);
 static LIST_HEAD(reset_lookup_list);
 
+/* Protects reset_gpio_lookup_list */
+static DEFINE_MUTEX(reset_gpio_lookup_mutex);
+static LIST_HEAD(reset_gpio_lookup_list);
+static DEFINE_IDA(reset_gpio_ida);
+
 /**
  * struct reset_control - a reset control
  * @rcdev: a pointer to the reset controller device
@@ -63,6 +73,16 @@ struct reset_control_array {
 	struct reset_control *rstc[] __counted_by(num_rstcs);
 };
 
+/**
+ * struct reset_gpio_lookup - lookup key for ad-hoc created reset-gpio devices
+ * @of_args: phandle to the reset controller with all the args like GPIO number
+ * @list: list entry for the reset_gpio_lookup_list
+ */
+struct reset_gpio_lookup {
+	struct of_phandle_args of_args;
+	struct list_head list;
+};
+
 static const char *rcdev_name(struct reset_controller_dev *rcdev)
 {
 	if (rcdev->dev)
@@ -71,6 +91,9 @@ static const char *rcdev_name(struct reset_controller_dev *rcdev)
 	if (rcdev->of_node)
 		return rcdev->of_node->full_name;
 
+	if (rcdev->of_args)
+		return rcdev->of_args->np->full_name;
+
 	return NULL;
 }
 
@@ -99,6 +122,9 @@ static int of_reset_simple_xlate(struct reset_controller_dev *rcdev,
  */
 int reset_controller_register(struct reset_controller_dev *rcdev)
 {
+	if (rcdev->of_node && rcdev->of_args)
+		return -EINVAL;
+
 	if (!rcdev->of_xlate) {
 		rcdev->of_reset_n_cells = 1;
 		rcdev->of_xlate = of_reset_simple_xlate;
@@ -813,12 +839,171 @@ static void __reset_control_put_internal(struct reset_control *rstc)
 	kref_put(&rstc->refcnt, __reset_control_release);
 }
 
+static int __reset_add_reset_gpio_lookup(int id, struct device_node *np,
+					 unsigned int gpio,
+					 unsigned int of_flags)
+{
+	const struct fwnode_handle *fwnode = of_fwnode_handle(np);
+	unsigned int lookup_flags;
+	const char *label_tmp;
+
+	/*
+	 * Later we map GPIO flags between OF and Linux, however not all
+	 * constants from include/dt-bindings/gpio/gpio.h and
+	 * include/linux/gpio/machine.h match each other.
+	 */
+	if (of_flags > GPIO_ACTIVE_LOW) {
+		pr_err("reset-gpio code does not support GPIO flags %u for GPIO %u\n",
+		       of_flags, gpio);
+		return -EINVAL;
+	}
+
+	struct gpio_device *gdev __free(gpio_device_put) = gpio_device_find_by_fwnode(fwnode);
+	if (!gdev)
+		return -EPROBE_DEFER;
+
+	label_tmp = gpio_device_get_label(gdev);
+	if (!label_tmp)
+		return -EINVAL;
+
+	char *label __free(kfree) = kstrdup(label_tmp, GFP_KERNEL);
+	if (!label)
+		return -ENOMEM;
+
+	/* Size: one lookup entry plus sentinel */
+	struct gpiod_lookup_table *lookup __free(kfree) = kzalloc(struct_size(lookup, table, 2),
+								  GFP_KERNEL);
+	if (!lookup)
+		return -ENOMEM;
+
+	lookup->dev_id = kasprintf(GFP_KERNEL, "reset-gpio.%d", id);
+	if (!lookup->dev_id)
+		return -ENOMEM;
+
+	lookup_flags = GPIO_PERSISTENT;
+	lookup_flags |= of_flags & GPIO_ACTIVE_LOW;
+	lookup->table[0] = GPIO_LOOKUP(no_free_ptr(label), gpio, "reset",
+				       lookup_flags);
+
+	/* Not freed on success, because it is persisent subsystem data. */
+	gpiod_add_lookup_table(no_free_ptr(lookup));
+
+	return 0;
+}
+
+/*
+ * @args:	phandle to the GPIO provider with all the args like GPIO number
+ */
+static int __reset_add_reset_gpio_device(const struct of_phandle_args *args)
+{
+	struct reset_gpio_lookup *rgpio_dev;
+	struct platform_device *pdev;
+	int id, ret;
+
+	/*
+	 * Currently only #gpio-cells=2 is supported with the meaning of:
+	 * args[0]: GPIO number
+	 * args[1]: GPIO flags
+	 * TODO: Handle other cases.
+	 */
+	if (args->args_count != 2)
+		return -ENOENT;
+
+	/*
+	 * Registering reset-gpio device might cause immediate
+	 * bind, resulting in its probe() registering new reset controller thus
+	 * taking reset_list_mutex lock via reset_controller_register().
+	 */
+	lockdep_assert_not_held(&reset_list_mutex);
+
+	mutex_lock(&reset_gpio_lookup_mutex);
+
+	list_for_each_entry(rgpio_dev, &reset_gpio_lookup_list, list) {
+		if (args->np == rgpio_dev->of_args.np) {
+			if (of_phandle_args_equal(args, &rgpio_dev->of_args))
+				goto out; /* Already on the list, done */
+		}
+	}
+
+	id = ida_alloc(&reset_gpio_ida, GFP_KERNEL);
+	if (id < 0) {
+		ret = id;
+		goto err_unlock;
+	}
+
+	/* Not freed on success, because it is persisent subsystem data. */
+	rgpio_dev = kzalloc(sizeof(*rgpio_dev), GFP_KERNEL);
+	if (!rgpio_dev) {
+		ret = -ENOMEM;
+		goto err_ida_free;
+	}
+
+	ret = __reset_add_reset_gpio_lookup(id, args->np, args->args[0],
+					    args->args[1]);
+	if (ret < 0)
+		goto err_kfree;
+
+	rgpio_dev->of_args = *args;
+	/*
+	 * We keep the device_node reference, but of_args.np is put at the end
+	 * of __of_reset_control_get(), so get it one more time.
+	 * Hold reference as long as rgpio_dev memory is valid.
+	 */
+	of_node_get(rgpio_dev->of_args.np);
+	pdev = platform_device_register_data(NULL, "reset-gpio", id,
+					     &rgpio_dev->of_args,
+					     sizeof(rgpio_dev->of_args));
+	ret = PTR_ERR_OR_ZERO(pdev);
+	if (ret)
+		goto err_put;
+
+	list_add(&rgpio_dev->list, &reset_gpio_lookup_list);
+
+out:
+	mutex_unlock(&reset_gpio_lookup_mutex);
+
+	return 0;
+
+err_put:
+	of_node_put(rgpio_dev->of_args.np);
+err_kfree:
+	kfree(rgpio_dev);
+err_ida_free:
+	ida_free(&reset_gpio_ida, id);
+err_unlock:
+	mutex_unlock(&reset_gpio_lookup_mutex);
+
+	return ret;
+}
+
+static struct reset_controller_dev *__reset_find_rcdev(const struct of_phandle_args *args,
+						       bool gpio_fallback)
+{
+	struct reset_controller_dev *rcdev;
+
+	lockdep_assert_held(&reset_list_mutex);
+
+	list_for_each_entry(rcdev, &reset_controller_list, list) {
+		if (gpio_fallback) {
+			if (rcdev->of_args && of_phandle_args_equal(args,
+								    rcdev->of_args))
+				return rcdev;
+		} else {
+			if (args->np == rcdev->of_node)
+				return rcdev;
+		}
+	}
+
+	return NULL;
+}
+
 struct reset_control *
 __of_reset_control_get(struct device_node *node, const char *id, int index,
 		       bool shared, bool optional, bool acquired)
 {
+	bool gpio_fallback = false;
 	struct reset_control *rstc;
-	struct reset_controller_dev *r, *rcdev;
+	struct reset_controller_dev *rcdev;
 	struct of_phandle_args args;
 	int rstc_id;
 	int ret;
@@ -839,39 +1024,52 @@ __of_reset_control_get(struct device_node *node, const char *id, int index,
 					 index, &args);
 	if (ret == -EINVAL)
 		return ERR_PTR(ret);
-	if (ret)
-		return optional ? NULL : ERR_PTR(ret);
+	if (ret) {
+		if (!IS_ENABLED(CONFIG_RESET_GPIO))
+			return optional ? NULL : ERR_PTR(ret);
 
-	mutex_lock(&reset_list_mutex);
-	rcdev = NULL;
-	list_for_each_entry(r, &reset_controller_list, list) {
-		if (args.np == r->of_node) {
-			rcdev = r;
-			break;
+		/*
+		 * There can be only one reset-gpio for regular devices, so
+		 * don't bother with the "reset-gpios" phandle index.
+		 */
+		ret = of_parse_phandle_with_args(node, "reset-gpios", "#gpio-cells",
+						 0, &args);
+		if (ret)
+			return optional ? NULL : ERR_PTR(ret);
+
+		gpio_fallback = true;
+
+		ret = __reset_add_reset_gpio_device(&args);
+		if (ret) {
+			rstc = ERR_PTR(ret);
+			goto out_put;
 		}
 	}
 
+	mutex_lock(&reset_list_mutex);
+	rcdev = __reset_find_rcdev(&args, gpio_fallback);
 	if (!rcdev) {
 		rstc = ERR_PTR(-EPROBE_DEFER);
-		goto out;
+		goto out_unlock;
 	}
 
 	if (WARN_ON(args.args_count != rcdev->of_reset_n_cells)) {
 		rstc = ERR_PTR(-EINVAL);
-		goto out;
+		goto out_unlock;
 	}
 
 	rstc_id = rcdev->of_xlate(rcdev, &args);
 	if (rstc_id < 0) {
 		rstc = ERR_PTR(rstc_id);
-		goto out;
+		goto out_unlock;
 	}
 
 	/* reset_list_mutex also protects the rcdev's reset_control list */
 	rstc = __reset_control_get_internal(rcdev, rstc_id, shared, acquired);
 
-out:
+out_unlock:
 	mutex_unlock(&reset_list_mutex);
+out_put:
 	of_node_put(args.np);
 
 	return rstc;
diff --git a/drivers/reset/reset-gpio.c b/drivers/reset/reset-gpio.c
new file mode 100644
index 000000000000..2290b25b6703
--- /dev/null
+++ b/drivers/reset/reset-gpio.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/gpio/consumer.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+
+struct reset_gpio_priv {
+	struct reset_controller_dev rc;
+	struct gpio_desc *reset;
+};
+
+static inline struct reset_gpio_priv
+*rc_to_reset_gpio(struct reset_controller_dev *rc)
+{
+	return container_of(rc, struct reset_gpio_priv, rc);
+}
+
+static int reset_gpio_assert(struct reset_controller_dev *rc, unsigned long id)
+{
+	struct reset_gpio_priv *priv = rc_to_reset_gpio(rc);
+
+	gpiod_set_value_cansleep(priv->reset, 1);
+
+	return 0;
+}
+
+static int reset_gpio_deassert(struct reset_controller_dev *rc,
+			       unsigned long id)
+{
+	struct reset_gpio_priv *priv = rc_to_reset_gpio(rc);
+
+	gpiod_set_value_cansleep(priv->reset, 0);
+
+	return 0;
+}
+
+static int reset_gpio_status(struct reset_controller_dev *rc, unsigned long id)
+{
+	struct reset_gpio_priv *priv = rc_to_reset_gpio(rc);
+
+	return gpiod_get_value_cansleep(priv->reset);
+}
+
+static const struct reset_control_ops reset_gpio_ops = {
+	.assert = reset_gpio_assert,
+	.deassert = reset_gpio_deassert,
+	.status = reset_gpio_status,
+};
+
+static int reset_gpio_of_xlate(struct reset_controller_dev *rcdev,
+			       const struct of_phandle_args *reset_spec)
+{
+	return reset_spec->args[0];
+}
+
+static void reset_gpio_of_node_put(void *data)
+{
+	of_node_put(data);
+}
+
+static int reset_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct of_phandle_args *platdata = dev_get_platdata(dev);
+	struct reset_gpio_priv *priv;
+	int ret;
+
+	if (!platdata)
+		return -EINVAL;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, &priv->rc);
+
+	priv->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->reset))
+		return dev_err_probe(dev, PTR_ERR(priv->reset),
+				     "Could not get reset gpios\n");
+
+	priv->rc.ops = &reset_gpio_ops;
+	priv->rc.owner = THIS_MODULE;
+	priv->rc.dev = dev;
+	priv->rc.of_args = platdata;
+	ret = devm_add_action_or_reset(dev, reset_gpio_of_node_put,
+				       priv->rc.of_node);
+	if (ret)
+		return ret;
+
+	/* Cells to match GPIO specifier, but it's not really used */
+	priv->rc.of_reset_n_cells = 2;
+	priv->rc.of_xlate = reset_gpio_of_xlate;
+	priv->rc.nr_resets = 1;
+
+	return devm_reset_controller_register(dev, &priv->rc);
+}
+
+static const struct platform_device_id reset_gpio_ids[] = {
+	{ .name = "reset-gpio", },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, reset_gpio_ids);
+
+static struct platform_driver reset_gpio_driver = {
+	.probe		= reset_gpio_probe,
+	.id_table	= reset_gpio_ids,
+	.driver	= {
+		.name = "reset-gpio",
+	},
+};
+module_platform_driver(reset_gpio_driver);
+
+MODULE_AUTHOR("Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>");
+MODULE_DESCRIPTION("Generic GPIO reset driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
index 818cabcc9fb7..276067839830 100644
--- a/drivers/reset/reset-simple.c
+++ b/drivers/reset/reset-simple.c
@@ -151,6 +151,8 @@ static const struct of_device_id reset_simple_dt_ids[] = {
 	{ .compatible = "snps,dw-high-reset" },
 	{ .compatible = "snps,dw-low-reset",
 		.data = &reset_simple_active_low },
+	{ .compatible = "sophgo,sg2042-reset",
+		.data = &reset_simple_active_low },
 	{ /* sentinel */ },
 };
 
diff --git a/drivers/soc/fsl/dpio/dpio-service.c b/drivers/soc/fsl/dpio/dpio-service.c
index 1d2b27e3ea63..b811446e0fa5 100644
--- a/drivers/soc/fsl/dpio/dpio-service.c
+++ b/drivers/soc/fsl/dpio/dpio-service.c
@@ -523,7 +523,7 @@ int dpaa2_io_service_enqueue_multiple_desc_fq(struct dpaa2_io *d,
 	struct qbman_eq_desc *ed;
 	int i, ret;
 
-	ed = kcalloc(sizeof(struct qbman_eq_desc), 32, GFP_KERNEL);
+	ed = kcalloc(32, sizeof(struct qbman_eq_desc), GFP_KERNEL);
 	if (!ed)
 		return -ENOMEM;