summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorRengarajan S <rengarajan.s@microchip.com>2023-12-15 18:11:22 +0300
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2024-01-04 18:22:41 +0300
commitaba8290f368d965d49c929a283b3bf41783d3ada (patch)
treeede9f4a59bc64d2853dd92e48ea054e6dbfdfbe8 /drivers
parentb7fbca372bb6247990e2419c09fe6064d107542d (diff)
downloadlinux-aba8290f368d965d49c929a283b3bf41783d3ada.tar.xz
8250: microchip: pci1xxxx: Add Burst mode reception support in uart driver for writing into FIFO
In PCI1XXXX C0 endpoint, support for Burst mode is added. pci1xxxx_handle_irq checks the burst status and based on that incoming characters are received in DWORDs, RX handling is done in pci1xxxx_rx_burst. While reading the burst status the RX error is checked and the corresponding error statistics are updated. Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20231215151123.41812-4-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/tty/serial/8250/8250_pci1xxxx.c123
1 files changed, 121 insertions, 2 deletions
diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c
index 6b6f3731307f..558c4c7f3104 100644
--- a/drivers/tty/serial/8250/8250_pci1xxxx.c
+++ b/drivers/tty/serial/8250/8250_pci1xxxx.c
@@ -66,6 +66,9 @@
#define SYSLOCK_SLEEP_TIMEOUT 100
#define SYSLOCK_RETRY_CNT 1000
+#define UART_RX_BYTE_FIFO 0x00
+#define UART_FIFO_CTL 0x02
+
#define UART_ACTV_REG 0x11
#define UART_BLOCK_SET_ACTIVE BIT(0)
@@ -96,8 +99,23 @@
#define UART_RESET_REG 0x94
#define UART_RESET_D3_RESET_DISABLE BIT(16)
+#define UART_BURST_STATUS_REG 0x9C
+#define UART_RX_BURST_FIFO 0xA4
+
#define MAX_PORTS 4
#define PORT_OFFSET 0x100
+#define RX_BUF_SIZE 512
+#define UART_BYTE_SIZE 1
+#define UART_BURST_SIZE 4
+
+#define UART_BST_STAT_RX_COUNT_MASK 0x00FF
+#define UART_BST_STAT_IIR_INT_PEND 0x100000
+#define UART_LSR_OVERRUN_ERR_CLR 0x43
+#define UART_BST_STAT_LSR_RX_MASK 0x9F000000
+#define UART_BST_STAT_LSR_RX_ERR_MASK 0x9E000000
+#define UART_BST_STAT_LSR_OVERRUN_ERR 0x2000000
+#define UART_BST_STAT_LSR_PARITY_ERR 0x4000000
+#define UART_BST_STAT_LSR_FRAME_ERR 0x8000000
struct pci1xxxx_8250 {
unsigned int nr;
@@ -249,6 +267,103 @@ static int pci1xxxx_rs485_config(struct uart_port *port,
return 0;
}
+static u32 pci1xxxx_read_burst_status(struct uart_port *port)
+{
+ u32 status;
+
+ status = readl(port->membase + UART_BURST_STATUS_REG);
+ if (status & UART_BST_STAT_LSR_RX_ERR_MASK) {
+ if (status & UART_BST_STAT_LSR_OVERRUN_ERR) {
+ writeb(UART_LSR_OVERRUN_ERR_CLR,
+ port->membase + UART_FIFO_CTL);
+ port->icount.overrun++;
+ }
+
+ if (status & UART_BST_STAT_LSR_FRAME_ERR)
+ port->icount.frame++;
+
+ if (status & UART_BST_STAT_LSR_PARITY_ERR)
+ port->icount.parity++;
+ }
+ return status;
+}
+
+static void pci1xxxx_process_read_data(struct uart_port *port,
+ unsigned char *rx_buff, u32 *buff_index,
+ u32 *valid_byte_count)
+{
+ u32 valid_burst_count = *valid_byte_count / UART_BURST_SIZE;
+ u32 *burst_buf;
+
+ /*
+ * Depending on the RX Trigger Level the number of bytes that can be
+ * stored in RX FIFO at a time varies. Each transaction reads data
+ * in DWORDs. If there are less than four remaining valid_byte_count
+ * to read, the data is received one byte at a time.
+ */
+ while (valid_burst_count--) {
+ if (*buff_index > (RX_BUF_SIZE - UART_BURST_SIZE))
+ break;
+ burst_buf = (u32 *)&rx_buff[*buff_index];
+ *burst_buf = readl(port->membase + UART_RX_BURST_FIFO);
+ *buff_index += UART_BURST_SIZE;
+ *valid_byte_count -= UART_BURST_SIZE;
+ }
+
+ while (*valid_byte_count) {
+ if (*buff_index > RX_BUF_SIZE)
+ break;
+ rx_buff[*buff_index] = readb(port->membase +
+ UART_RX_BYTE_FIFO);
+ *buff_index += UART_BYTE_SIZE;
+ *valid_byte_count -= UART_BYTE_SIZE;
+ }
+}
+
+static void pci1xxxx_rx_burst(struct uart_port *port, u32 uart_status)
+{
+ u32 valid_byte_count = uart_status & UART_BST_STAT_RX_COUNT_MASK;
+ struct tty_port *tty_port = &port->state->port;
+ unsigned char rx_buff[RX_BUF_SIZE];
+ u32 buff_index = 0;
+ u32 copied_len;
+
+ if (valid_byte_count != 0 &&
+ valid_byte_count < RX_BUF_SIZE) {
+ pci1xxxx_process_read_data(port, rx_buff, &buff_index,
+ &valid_byte_count);
+
+ copied_len = (u32)tty_insert_flip_string(tty_port, rx_buff,
+ buff_index);
+
+ if (copied_len != buff_index)
+ port->icount.overrun += buff_index - copied_len;
+
+ port->icount.rx += buff_index;
+ tty_flip_buffer_push(tty_port);
+ }
+}
+
+static int pci1xxxx_handle_irq(struct uart_port *port)
+{
+ unsigned long flags;
+ u32 status;
+
+ status = pci1xxxx_read_burst_status(port);
+
+ if (status & UART_BST_STAT_IIR_INT_PEND)
+ return 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ if (status & UART_BST_STAT_LSR_RX_MASK)
+ pci1xxxx_rx_burst(port, status);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return 1;
+}
+
static bool pci1xxxx_port_suspend(int line)
{
struct uart_8250_port *up = serial8250_get_port(line);
@@ -360,7 +475,7 @@ static int pci1xxxx_resume(struct device *dev)
}
static int pci1xxxx_setup(struct pci_dev *pdev,
- struct uart_8250_port *port, int port_idx)
+ struct uart_8250_port *port, int port_idx, int rev)
{
int ret;
@@ -372,6 +487,10 @@ static int pci1xxxx_setup(struct pci_dev *pdev,
port->port.rs485_config = pci1xxxx_rs485_config;
port->port.rs485_supported = pci1xxxx_rs485_supported;
+ /* From C0 rev Burst operation is supported */
+ if (rev >= 0xC0)
+ port->port.handle_irq = pci1xxxx_handle_irq;
+
ret = serial8250_pci_setup_port(pdev, port, 0, PORT_OFFSET * port_idx, 0);
if (ret < 0)
return ret;
@@ -491,7 +610,7 @@ static int pci1xxxx_serial_probe(struct pci_dev *pdev,
else
uart.port.irq = pci_irq_vector(pdev, 0);
- rc = pci1xxxx_setup(pdev, &uart, port_idx);
+ rc = pci1xxxx_setup(pdev, &uart, port_idx, priv->dev_rev);
if (rc) {
dev_warn(dev, "Failed to setup port %u\n", i);
continue;