diff options
author | Stefan Wahren <wahrenst@gmx.net> | 2024-03-07 10:01:13 +0300 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2024-03-28 11:52:25 +0300 |
commit | d54e4cda297241406bed37af3f836d242184ec84 (patch) | |
tree | 915a21f842245959ce9eada72b01e69f2ae8d0ca /drivers | |
parent | 85b02bc0785b5e6326814af7e1b7528ce3a488ea (diff) | |
download | linux-d54e4cda297241406bed37af3f836d242184ec84.tar.xz |
pinctrl: bcm2835: Implement bcm2711_pinconf_get
The BCM2711 allows to read the bias config. So implement pin_conf_get
accordingly. The pull resistor values has been taken from the
BCM2711/7211 datasheet.
This implementation assumes that BCM7211 behaves the same way.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-ID: <20240307070113.4888-3-wahrenst@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/pinctrl/bcm/pinctrl-bcm2835.c | 41 |
1 files changed, 40 insertions, 1 deletions
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c index 5d2b188a1ef4..f5a9372d43bd 100644 --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c @@ -1098,6 +1098,45 @@ static const struct pinconf_ops bcm2835_pinconf_ops = { .pin_config_set = bcm2835_pinconf_set, }; +static int bcm2711_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin, + unsigned long *config) +{ + struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param = pinconf_to_config_param(*config); + u32 offset, shift, val; + + offset = PUD_2711_REG_OFFSET(pin); + shift = PUD_2711_REG_SHIFT(pin); + val = bcm2835_gpio_rd(pc, GP_GPIO_PUP_PDN_CNTRL_REG0 + (offset * 4)); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + if (((val >> shift) & PUD_2711_MASK) != BCM2711_PULL_NONE) + return -EINVAL; + + break; + + case PIN_CONFIG_BIAS_PULL_UP: + if (((val >> shift) & PUD_2711_MASK) != BCM2711_PULL_UP) + return -EINVAL; + + *config = pinconf_to_config_packed(param, 50000); + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + if (((val >> shift) & PUD_2711_MASK) != BCM2711_PULL_DOWN) + return -EINVAL; + + *config = pinconf_to_config_packed(param, 50000); + break; + + default: + return bcm2835_pinconf_get(pctldev, pin, config); + } + + return 0; +} + static void bcm2711_pull_config_set(struct bcm2835_pinctrl *pc, unsigned int pin, unsigned int arg) { @@ -1165,7 +1204,7 @@ static int bcm2711_pinconf_set(struct pinctrl_dev *pctldev, static const struct pinconf_ops bcm2711_pinconf_ops = { .is_generic = true, - .pin_config_get = bcm2835_pinconf_get, + .pin_config_get = bcm2711_pinconf_get, .pin_config_set = bcm2711_pinconf_set, }; |