Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARMv4T/v5 multiplatform support from Arnd Bergmann:
 "This series has been 12 years in the making, it mostly finishes the
  work that was started with the founding of Linaro to clean up platform
  support in the kernel.

  The largest change here is a cleanup of the omap1 platform, which is
  the final ARM machine type to get converted to the common-clk
  subsystem. All the omap1 specific drivers are now made independent of
  the mach/*.h headers to allow the platform to be part of a generic
  ARMv4/v5 multiplatform kernel.

  The last bit that enables this support is still missing here while we
  wait for some last dependencies to make it into the mainline kernel
  through other subsystems.

  The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
  at the point of allowing multiplatform kernels, this work gets
  completed here along with a few additional cleanup. At the same time,
  the s3c24xx and s3c64xx are now deprecated and expected to get removed
  in the future.

  The PXA and OMAP1 bits are in a separate branch because of
  dependencies. Once both branches are merged, only the three Intel
  StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100)
  need separate kernels, and there are no plans to include these"

* tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
  ARM: ixp4xx: Consolidate Kconfig fixing issue
  ARM: versatile: Add missing of_node_put in dcscb_init
  ARM: config: Refresh IXP4xx config after multiplatform
  ARM: omap1: add back omap_set_dma_priority() stub
  ARM: omap: fix missing declaration warnings
  ARM: omap: fix address space warnings from sparse
  ARM: spear: remove include/mach/ subdirectory
  ARM: davinci: remove include/mach/ subdirectory
  ARM: omap2: remove include/mach/ subdirectory
  integrator: remove empty ap_init_early()
  ARM: s3c: fix include path
  MAINTAINERS: omap1: Add Janusz as an additional maintainer
  ARM: omap1: htc_herald: fix typos in comments
  ARM: OMAP1: fix typos in comments
  ARM: OMAP1: clock: Remove noop code
  ARM: OMAP1: clock: Remove unused code
  ARM: OMAP1: clock: Fix UART rate reporting algorithm
  ARM: OMAP1: clock: Fix early UART rate issues
  ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
  ARM: omap1: fix build with no SoC selected
  ...

28 files changed, 645 insertions, 119 deletions

diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
index 3e52c5226c4d..df4a73ea6651 100644
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -433,7 +433,7 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
 }
 
 #if defined(CONFIG_ARCH_OMAP1)
-#include <mach/hardware.h>
+#include <linux/soc/ti/omap1-io.h>
 
 static struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 {
diff --git a/drivers/dma/ti/omap-dma.c b/drivers/dma/ti/omap-dma.c
index 8e52a0dc1f78..27f5019bdc1e 100644
--- a/drivers/dma/ti/omap-dma.c
+++ b/drivers/dma/ti/omap-dma.c
@@ -699,6 +699,11 @@ static void omap_dma_put_lch(struct omap_dmadev *od, int lch)
 	mutex_unlock(&od->lch_lock);
 }
 
+static inline bool omap_dma_legacy(struct omap_dmadev *od)
+{
+	return IS_ENABLED(CONFIG_ARCH_OMAP1) && od->legacy;
+}
+
 static int omap_dma_alloc_chan_resources(struct dma_chan *chan)
 {
 	struct omap_dmadev *od = to_omap_dma_dev(chan->device);
@@ -706,7 +711,7 @@ static int omap_dma_alloc_chan_resources(struct dma_chan *chan)
 	struct device *dev = od->ddev.dev;
 	int ret;
 
-	if (od->legacy) {
+	if (omap_dma_legacy(od)) {
 		ret = omap_request_dma(c->dma_sig, "DMA engine",
 				       omap_dma_callback, c, &c->dma_ch);
 	} else {
@@ -718,7 +723,7 @@ static int omap_dma_alloc_chan_resources(struct dma_chan *chan)
 	if (ret >= 0) {
 		omap_dma_assign(od, c, c->dma_ch);
 
-		if (!od->legacy) {
+		if (!omap_dma_legacy(od)) {
 			unsigned val;
 
 			spin_lock_irq(&od->irq_lock);
@@ -757,7 +762,7 @@ static void omap_dma_free_chan_resources(struct dma_chan *chan)
 	struct omap_dmadev *od = to_omap_dma_dev(chan->device);
 	struct omap_chan *c = to_omap_dma_chan(chan);
 
-	if (!od->legacy) {
+	if (!omap_dma_legacy(od)) {
 		spin_lock_irq(&od->irq_lock);
 		od->irq_enable_mask &= ~BIT(c->dma_ch);
 		omap_dma_glbl_write(od, IRQENABLE_L1, od->irq_enable_mask);
@@ -768,7 +773,7 @@ static void omap_dma_free_chan_resources(struct dma_chan *chan)
 	od->lch_map[c->dma_ch] = NULL;
 	vchan_free_chan_resources(&c->vc);
 
-	if (od->legacy)
+	if (omap_dma_legacy(od))
 		omap_free_dma(c->dma_ch);
 	else
 		omap_dma_put_lch(od, c->dma_ch);
@@ -1674,12 +1679,14 @@ static int omap_dma_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev, "omap_system_dma_plat_info is missing");
 			return -ENODEV;
 		}
-	} else {
+	} else if (IS_ENABLED(CONFIG_ARCH_OMAP1)) {
 		od->cfg = &default_cfg;
 
 		od->plat = omap_get_plat_info();
 		if (!od->plat)
 			return -EPROBE_DEFER;
+	} else {
+		return -ENODEV;
 	}
 
 	od->reg_map = od->plat->reg_map;
@@ -1855,7 +1862,7 @@ static int omap_dma_remove(struct platform_device *pdev)
 
 	dma_async_device_unregister(&od->ddev);
 
-	if (!od->legacy) {
+	if (!omap_dma_legacy(od)) {
 		/* Disable all interrupts */
 		omap_dma_glbl_write(od, IRQENABLE_L0, 0);
 	}
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index eb3a687796e7..57447d6c9007 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -24,6 +24,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/keypad-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #undef NEW_BOARD_LEARNING_MODE
 
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 2ce261cfff8e..ec977f031bc2 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -246,7 +246,8 @@ config PCMCIA_VRC4171
 
 config OMAP_CF
 	tristate "OMAP CompactFlash Controller"
-	depends on PCMCIA && ARCH_OMAP16XX
+	depends on PCMCIA
+	depends on ARCH_OMAP16XX || (ARM && COMPILE_TEST)
 	help
 	  Say Y here to support the CompactFlash controller on OMAP.
 	  Note that this doesn't support "True IDE" mode.
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index f0b2c2d03469..1972a8f6fa8e 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -16,13 +16,12 @@
 
 #include <pcmcia/ss.h>
 
-#include <mach/hardware.h>
 #include <asm/io.h>
 #include <linux/sizes.h>
 
-#include <mach/mux.h>
-#include <mach/tc.h>
-
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-mux.h>
 
 /* NOTE:  don't expect this to support many I/O cards.  The 16xx chips have
  * hard-wired timings to support Compact Flash memory cards; they won't work
@@ -205,6 +204,8 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 	struct omap_cf_socket	*cf;
 	int			irq;
 	int			status;
+	struct resource		*res;
+	struct resource		iospace = DEFINE_RES_IO(SZ_64, SZ_4K);
 
 	seg = (int) pdev->dev.platform_data;
 	if (seg == 0 || seg > 3)
@@ -215,6 +216,8 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return -EINVAL;
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
 	cf = kzalloc(sizeof *cf, GFP_KERNEL);
 	if (!cf)
 		return -ENOMEM;
@@ -230,29 +233,12 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 		goto fail0;
 	cf->irq = irq;
 	cf->socket.pci_irq = irq;
-
-	switch (seg) {
-	/* NOTE: CS0 could be configured too ... */
-	case 1:
-		cf->phys_cf = OMAP_CS1_PHYS;
-		break;
-	case 2:
-		cf->phys_cf = OMAP_CS2_PHYS;
-		break;
-	case 3:
-		cf->phys_cf = omap_cs3_phys();
-		break;
-	default:
-		goto  fail1;
-	}
-	cf->iomem.start = cf->phys_cf;
-	cf->iomem.end = cf->iomem.end + SZ_8K - 1;
-	cf->iomem.flags = IORESOURCE_MEM;
+	cf->phys_cf = res->start;
 
 	/* pcmcia layer only remaps "real" memory */
-	cf->socket.io_offset = (unsigned long)
-			ioremap(cf->phys_cf + SZ_4K, SZ_2K);
-	if (!cf->socket.io_offset) {
+	cf->socket.io_offset = iospace.start;
+	status = pci_remap_iospace(&iospace, cf->phys_cf + SZ_4K);
+	if (status) {
 		status = -ENOMEM;
 		goto fail1;
 	}
@@ -273,15 +259,6 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 
 	pr_info("%s: cs%d on irq %d\n", driver_name, seg, irq);
 
-	/* NOTE:  better EMIFS setup might support more cards; but the
-	 * TRM only shows how to affect regular flash signals, not their
-	 * CF/PCMCIA variants...
-	 */
-	pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", driver_name,
-		seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
-	omap_writel(0x0004a1b3, EMIFS_CCS(seg));	/* synch mode 4 etc */
-	omap_writel(0x00000000, EMIFS_ACS(seg));	/* OE hold/setup */
-
 	/* CF uses armxor_ck, which is "always" available */
 
 	pr_debug("%s: sts %04x cfg %04x control %04x %s\n", driver_name,
@@ -309,8 +286,6 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 fail2:
 	release_mem_region(cf->phys_cf, SZ_8K);
 fail1:
-	if (cf->socket.io_offset)
-		iounmap((void __iomem *) cf->socket.io_offset);
 	free_irq(irq, cf);
 fail0:
 	kfree(cf);
@@ -324,7 +299,6 @@ static int __exit omap_cf_remove(struct platform_device *pdev)
 	cf->active = 0;
 	pcmcia_unregister_socket(&cf->socket);
 	del_timer_sync(&cf->timer);
-	iounmap((void __iomem *) cf->socket.io_offset);
 	release_mem_region(cf->phys_cf, SZ_8K);
 	free_irq(cf->irq, cf);
 	kfree(cf);
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 38117775ff79..3b1044ebc400 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -651,7 +651,7 @@ config SPI_OCTEON
 
 config SPI_OMAP_UWIRE
 	tristate "OMAP1 MicroWire"
-	depends on ARCH_OMAP1
+	depends on ARCH_OMAP1 || (ARM && COMPILE_TEST)
 	select SPI_BITBANG
 	help
 	  This hooks up to the MicroWire controller on OMAP1 chips.
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index 087172a193fa..29198e6815b2 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -44,13 +44,10 @@
 #include <linux/module.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
-
-#include <mach/mux.h>
-
-#include <mach/omap7xx.h>	/* OMAP7XX_IO_CONF registers */
-
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-mux.h>
 
 /* FIXME address is now a platform device resource,
  * and irqs should show there too...
@@ -548,12 +545,6 @@ static int __init omap_uwire_init(void)
 		omap_cfg_reg(N14_1610_UWIRE_CS0);
 		omap_cfg_reg(N15_1610_UWIRE_CS1);
 	}
-	if (machine_is_omap_perseus2()) {
-		/* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
-		int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000;
-		omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9);
-	}
-
 	return platform_driver_register(&uwire_driver);
 }
 
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index db784ace25d8..a8830e15a22c 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -259,6 +259,7 @@ static inline int fintek_8250_probe(struct uart_8250_port *uart) { return 0; }
 #endif
 
 #ifdef CONFIG_ARCH_OMAP1
+#include <linux/soc/ti/omap1-soc.h>
 static inline int is_omap1_8250(struct uart_8250_port *pt)
 {
 	int res;
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 2d9815dad2ff..5096d24915ce 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -40,8 +40,11 @@
 #include <asm/mach-types.h>
 
 #include <linux/omap-dma.h>
+#include <linux/platform_data/usb-omap1.h>
 
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include "omap_udc.h"
 
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 57ca5f97a3dc..682b3d2da623 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -214,7 +214,7 @@ config USB_EHCI_HCD_NPCM7XX
 
 config USB_EHCI_HCD_OMAP
 	tristate "EHCI support for OMAP3 and later chips"
-	depends on ARCH_OMAP
+	depends on ARCH_OMAP || COMPILE_TEST
 	depends on NOP_USB_XCEIV
 	default y
 	help
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 45dcf8292072..069791d25abb 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,6 +25,11 @@
 #include <linux/module.h>
 #include <linux/usb/otg.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
+#include <linux/soc/ti/omap1-mux.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-io.h>
 #include <linux/signal.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -34,12 +39,6 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <mach/mux.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
-
 #define DRIVER_DESC "OHCI OMAP driver"
 
 struct ohci_omap_priv {
@@ -68,31 +67,6 @@ static void omap_ohci_clock_power(struct ohci_omap_priv *priv, int on)
 	}
 }
 
-/*
- * Board specific gang-switched transceiver power on/off.
- * NOTE:  OSK supplies power from DC, not battery.
- */
-static int omap_ohci_transceiver_power(struct ohci_omap_priv *priv, int on)
-{
-	if (on) {
-		if (machine_is_omap_innovator() && cpu_is_omap1510())
-			__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
-				| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
-			       INNOVATOR_FPGA_CAM_USB_CONTROL);
-		else if (priv->power)
-			gpiod_set_value_cansleep(priv->power, 0);
-	} else {
-		if (machine_is_omap_innovator() && cpu_is_omap1510())
-			__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
-				& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
-			       INNOVATOR_FPGA_CAM_USB_CONTROL);
-		else if (priv->power)
-			gpiod_set_value_cansleep(priv->power, 1);
-	}
-
-	return 0;
-}
-
 #ifdef	CONFIG_USB_OTG
 
 static void start_hnp(struct ohci_hcd *ohci)
@@ -203,7 +177,11 @@ static int ohci_omap_reset(struct usb_hcd *hcd)
 	}
 
 	/* FIXME hub_wq hub requests should manage power switching */
-	omap_ohci_transceiver_power(priv, 1);
+	if (config->transceiver_power)
+		return config->transceiver_power(1);
+
+	if (priv->power)
+		gpiod_set_value_cansleep(priv->power, 0);
 
 	/* board init will have already handled HMC and mux setup.
 	 * any external transceiver should already be initialized
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 52eebcb88c1f..2acbe41fbf7e 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -30,7 +30,8 @@ config FSL_USB2_OTG
 
 config ISP1301_OMAP
 	tristate "Philips ISP1301 with OMAP OTG"
-	depends on I2C && ARCH_OMAP_OTG
+	depends on I2C
+	depends on ARCH_OMAP_OTG || (ARM && COMPILE_TEST)
 	depends on USB
 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 190699b38b41..f8bd93fe69cd 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -23,9 +23,9 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/mux.h>
-
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-mux.h>
+#include <linux/soc/ti/omap1-usb.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #undef VERBOSE
 
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index e32694c13da5..a003e02e13ce 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -211,8 +211,8 @@ config BACKLIGHT_LOCOMO
 
 config BACKLIGHT_OMAP1
 	tristate "OMAP1 PWL-based LCD Backlight"
-	depends on ARCH_OMAP1
-	default y
+	depends on ARCH_OMAP1 || COMPILE_TEST
+	default ARCH_OMAP1
 	help
 	  This driver controls the LCD backlight level and power for
 	  the PWL module of OMAP1 processors.  Say Y if your board
diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
index 74263021b1b3..69a49384b3de 100644
--- a/drivers/video/backlight/omap1_bl.c
+++ b/drivers/video/backlight/omap1_bl.c
@@ -14,8 +14,8 @@
 #include <linux/slab.h>
 #include <linux/platform_data/omap1_bl.h>
 
-#include <mach/hardware.h>
-#include <mach/mux.h>
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-mux.h>
 
 #define OMAPBL_MAX_INTENSITY		0xff
 
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 477b9624b703..7795c4126706 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -110,7 +110,7 @@ obj-$(CONFIG_FB_UDL)		  += udlfb.o
 obj-$(CONFIG_FB_SMSCUFX)	  += smscufx.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
 obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
-obj-$(CONFIG_FB_OMAP)             += omap/
+obj-y				  += omap/
 obj-y                             += omap2/
 obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
 obj-$(CONFIG_FB_CARMINE)          += carminefb.o
diff --git a/drivers/video/fbdev/omap/Kconfig b/drivers/video/fbdev/omap/Kconfig
index df2a5d0d4aa2..b1786cf1b486 100644
--- a/drivers/video/fbdev/omap/Kconfig
+++ b/drivers/video/fbdev/omap/Kconfig
@@ -2,7 +2,7 @@
 config FB_OMAP
 	tristate "OMAP frame buffer support"
 	depends on FB
-	depends on ARCH_OMAP1
+	depends on ARCH_OMAP1 || (ARM && COMPILE_TEST)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -42,7 +42,7 @@ config FB_OMAP_LCD_MIPID
 
 config FB_OMAP_LCD_H3
 	bool "TPS65010 LCD controller on OMAP-H3"
-	depends on MACH_OMAP_H3
+	depends on MACH_OMAP_H3 || COMPILE_TEST
 	depends on TPS65010=y
 	default y
 	help
diff --git a/drivers/video/fbdev/omap/Makefile b/drivers/video/fbdev/omap/Makefile
index daaa73a94e7f..b88e02f5cb1f 100644
--- a/drivers/video/fbdev/omap/Makefile
+++ b/drivers/video/fbdev/omap/Makefile
@@ -5,6 +5,11 @@
 
 obj-$(CONFIG_FB_OMAP) += omapfb.o
 
+ifdef CONFIG_FB_OMAP
+# must be built-in
+obj-y += lcd_dma.o
+endif
+
 objs-yy := omapfb_main.o lcdc.o
 
 objs-y$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
diff --git a/drivers/video/fbdev/omap/lcd_ams_delta.c b/drivers/video/fbdev/omap/lcd_ams_delta.c
index bbf871f9d862..6f860c814d2c 100644
--- a/drivers/video/fbdev/omap/lcd_ams_delta.c
+++ b/drivers/video/fbdev/omap/lcd_ams_delta.c
@@ -14,7 +14,7 @@
 #include <linux/gpio/consumer.h>
 #include <linux/lcd.h>
 
-#include <mach/hardware.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include "omapfb.h"
 
@@ -128,7 +128,6 @@ static struct lcd_panel ams_delta_panel = {
 static int ams_delta_panel_probe(struct platform_device *pdev)
 {
 	struct lcd_device *lcd_device = NULL;
-	int ret;
 
 	gpiod_vblen = devm_gpiod_get(&pdev->dev, "vblen", GPIOD_OUT_LOW);
 	if (IS_ERR(gpiod_vblen))
@@ -145,7 +144,8 @@ static int ams_delta_panel_probe(struct platform_device *pdev)
 						&ams_delta_lcd_ops);
 
 	if (IS_ERR(lcd_device)) {
-		ret = PTR_ERR(lcd_device);
+		int ret = PTR_ERR(lcd_device);
+
 		dev_err(&pdev->dev, "failed to register device\n");
 		return ret;
 	}
diff --git a/drivers/video/fbdev/omap/lcd_dma.c b/drivers/video/fbdev/omap/lcd_dma.c
new file mode 100644
index 000000000000..f85817635a8c
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_dma.c
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/mach-omap1/lcd_dma.c
+ *
+ * Extracted from arch/arm/plat-omap/dma.c
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
+ * Graphics DMA and LCD DMA graphics tranformations
+ * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
+ * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Support functions for the OMAP internal DMA channels.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <linux/omap-dma.h>
+
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-io.h>
+
+#include "lcdc.h"
+#include "lcd_dma.h"
+
+int omap_lcd_dma_running(void)
+{
+	/*
+	 * On OMAP1510, internal LCD controller will start the transfer
+	 * when it gets enabled, so assume DMA running if LCD enabled.
+	 */
+	if (cpu_is_omap15xx())
+		if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
+			return 1;
+
+	/* Check if LCD DMA is running */
+	if (cpu_is_omap16xx())
+		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+			return 1;
+
+	return 0;
+}
+
+static struct lcd_dma_info {
+	spinlock_t lock;
+	int reserved;
+	void (*callback)(u16 status, void *data);
+	void *cb_data;
+
+	int active;
+	unsigned long addr;
+	int rotate, data_type, xres, yres;
+	int vxres;
+	int mirror;
+	int xscale, yscale;
+	int ext_ctrl;
+	int src_port;
+	int single_transfer;
+} lcd_dma;
+
+void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+			 int data_type)
+{
+	lcd_dma.addr = addr;
+	lcd_dma.data_type = data_type;
+	lcd_dma.xres = fb_xres;
+	lcd_dma.yres = fb_yres;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1);
+
+void omap_set_lcd_dma_ext_controller(int external)
+{
+	lcd_dma.ext_ctrl = external;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
+
+void omap_set_lcd_dma_single_transfer(int single)
+{
+	lcd_dma.single_transfer = single;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
+
+void omap_set_lcd_dma_b1_rotation(int rotate)
+{
+	if (cpu_is_omap15xx()) {
+		printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
+		BUG();
+		return;
+	}
+	lcd_dma.rotate = rotate;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
+
+void omap_set_lcd_dma_b1_mirror(int mirror)
+{
+	if (cpu_is_omap15xx()) {
+		printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.mirror = mirror;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
+
+void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
+{
+	if (cpu_is_omap15xx()) {
+		pr_err("DMA virtual resolution is not supported in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.vxres = vxres;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
+
+void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
+{
+	if (cpu_is_omap15xx()) {
+		printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.xscale = xscale;
+	lcd_dma.yscale = yscale;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
+
+static void set_b1_regs(void)
+{
+	unsigned long top, bottom;
+	int es;
+	u16 w;
+	unsigned long en, fn;
+	long ei, fi;
+	unsigned long vxres;
+	unsigned int xscale, yscale;
+
+	switch (lcd_dma.data_type) {
+	case OMAP_DMA_DATA_TYPE_S8:
+		es = 1;
+		break;
+	case OMAP_DMA_DATA_TYPE_S16:
+		es = 2;
+		break;
+	case OMAP_DMA_DATA_TYPE_S32:
+		es = 4;
+		break;
+	default:
+		BUG();
+		return;
+	}
+
+	vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
+	xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
+	yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
+	BUG_ON(vxres < lcd_dma.xres);
+
+#define PIXADDR(x, y) (lcd_dma.addr +					\
+		((y) * vxres * yscale + (x) * xscale) * es)
+#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
+
+	switch (lcd_dma.rotate) {
+	case 0:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(0, 0);
+			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			/* 1510 DMA requires the bottom address to be 2 more
+			 * than the actual last memory access location. */
+			if (cpu_is_omap15xx() &&
+				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
+					bottom += 2;
+			ei = PIXSTEP(0, 0, 1, 0);
+			fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
+		} else {
+			top = PIXADDR(lcd_dma.xres - 1, 0);
+			bottom = PIXADDR(0, lcd_dma.yres - 1);
+			ei = PIXSTEP(1, 0, 0, 0);
+			fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
+		}
+		en = lcd_dma.xres;
+		fn = lcd_dma.yres;
+		break;
+	case 90:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(0, lcd_dma.yres - 1);
+			bottom = PIXADDR(lcd_dma.xres - 1, 0);
+			ei = PIXSTEP(0, 1, 0, 0);
+			fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
+		} else {
+			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			bottom = PIXADDR(0, 0);
+			ei = PIXSTEP(0, 1, 0, 0);
+			fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
+		}
+		en = lcd_dma.yres;
+		fn = lcd_dma.xres;
+		break;
+	case 180:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			bottom = PIXADDR(0, 0);
+			ei = PIXSTEP(1, 0, 0, 0);
+			fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
+		} else {
+			top = PIXADDR(0, lcd_dma.yres - 1);
+			bottom = PIXADDR(lcd_dma.xres - 1, 0);
+			ei = PIXSTEP(0, 0, 1, 0);
+			fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
+		}
+		en = lcd_dma.xres;
+		fn = lcd_dma.yres;
+		break;
+	case 270:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(lcd_dma.xres - 1, 0);
+			bottom = PIXADDR(0, lcd_dma.yres - 1);
+			ei = PIXSTEP(0, 0, 0, 1);
+			fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
+		} else {
+			top = PIXADDR(0, 0);
+			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			ei = PIXSTEP(0, 0, 0, 1);
+			fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
+		}
+		en = lcd_dma.yres;
+		fn = lcd_dma.xres;
+		break;
+	default:
+		BUG();
+		return;	/* Suppress warning about uninitialized vars */
+	}
+
+	if (cpu_is_omap15xx()) {
+		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
+		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
+		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
+		omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
+
+		return;
+	}
+
+	/* 1610 regs */
+	omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
+	omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
+	omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
+	omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
+
+	omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
+	omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CSDP);
+	w &= ~0x03;
+	w |= lcd_dma.data_type;
+	omap_writew(w, OMAP1610_DMA_LCD_CSDP);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	/* Always set the source port as SDRAM for now*/
+	w &= ~(0x03 << 6);
+	if (lcd_dma.callback != NULL)
+		w |= 1 << 1;		/* Block interrupt enable */
+	else
+		w &= ~(1 << 1);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
+	if (!(lcd_dma.rotate || lcd_dma.mirror ||
+	      lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	/* Set the double-indexed addressing mode */
+	w |= (0x03 << 12);
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
+	omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
+	omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
+	omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
+}
+
+static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
+{
+	u16 w;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	if (unlikely(!(w & (1 << 3)))) {
+		printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
+		return IRQ_NONE;
+	}
+	/* Ack the IRQ */
+	w |= (1 << 3);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+	lcd_dma.active = 0;
+	if (lcd_dma.callback != NULL)
+		lcd_dma.callback(w, lcd_dma.cb_data);
+
+	return IRQ_HANDLED;
+}
+
+int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+			 void *data)
+{
+	spin_lock_irq(&lcd_dma.lock);
+	if (lcd_dma.reserved) {
+		spin_unlock_irq(&lcd_dma.lock);
+		printk(KERN_ERR "LCD DMA channel already reserved\n");
+		BUG();
+		return -EBUSY;
+	}
+	lcd_dma.reserved = 1;
+	spin_unlock_irq(&lcd_dma.lock);
+	lcd_dma.callback = callback;
+	lcd_dma.cb_data = data;
+	lcd_dma.active = 0;
+	lcd_dma.single_transfer = 0;
+	lcd_dma.rotate = 0;
+	lcd_dma.vxres = 0;
+	lcd_dma.mirror = 0;
+	lcd_dma.xscale = 0;
+	lcd_dma.yscale = 0;
+	lcd_dma.ext_ctrl = 0;
+	lcd_dma.src_port = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL(omap_request_lcd_dma);
+
+void omap_free_lcd_dma(void)
+{
+	spin_lock(&lcd_dma.lock);
+	if (!lcd_dma.reserved) {
+		spin_unlock(&lcd_dma.lock);
+		printk(KERN_ERR "LCD DMA is not reserved\n");
+		BUG();
+		return;
+	}
+	if (!cpu_is_omap15xx())
+		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
+			    OMAP1610_DMA_LCD_CCR);
+	lcd_dma.reserved = 0;
+	spin_unlock(&lcd_dma.lock);
+}
+EXPORT_SYMBOL(omap_free_lcd_dma);
+
+void omap_enable_lcd_dma(void)
+{
+	u16 w;
+
+	/*
+	 * Set the Enable bit only if an external controller is
+	 * connected. Otherwise the OMAP internal controller will
+	 * start the transfer when it gets enabled.
+	 */
+	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	w |= 1 << 8;
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
+	lcd_dma.active = 1;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	w |= 1 << 7;
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+}
+EXPORT_SYMBOL(omap_enable_lcd_dma);
+
+void omap_setup_lcd_dma(void)
+{
+	BUG_ON(lcd_dma.active);
+	if (!cpu_is_omap15xx()) {
+		/* Set some reasonable defaults */
+		omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
+		omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
+		omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
+	}
+	set_b1_regs();
+	if (!cpu_is_omap15xx()) {
+		u16 w;
+
+		w = omap_readw(OMAP1610_DMA_LCD_CCR);
+		/*
+		 * If DMA was already active set the end_prog bit to have
+		 * the programmed register set loaded into the active
+		 * register set.
+		 */
+		w |= 1 << 11;		/* End_prog */
+		if (!lcd_dma.single_transfer)
+			w |= (3 << 8);	/* Auto_init, repeat */
+		omap_writew(w, OMAP1610_DMA_LCD_CCR);
+	}
+}
+EXPORT_SYMBOL(omap_setup_lcd_dma);
+
+void omap_stop_lcd_dma(void)
+{
+	u16 w;
+
+	lcd_dma.active = 0;
+	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	w &= ~(1 << 7);
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	w &= ~(1 << 8);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+}
+EXPORT_SYMBOL(omap_stop_lcd_dma);
+
+static int __init omap_init_lcd_dma(void)
+{
+	int r;
+
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
+	if (cpu_is_omap16xx()) {
+		u16 w;
+
+		/* this would prevent OMAP sleep */
+		w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+		w &= ~(1 << 8);
+		omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+	}
+
+	spin_lock_init(&lcd_dma.lock);
+
+	r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
+			"LCD DMA", NULL);
+	if (r != 0)
+		pr_err("unable to request IRQ for LCD DMA (error %d)\n", r);
+
+	return r;
+}
+
+arch_initcall(omap_init_lcd_dma);
+
diff --git a/drivers/video/fbdev/omap/lcd_dma.h b/drivers/video/fbdev/omap/lcd_dma.h
new file mode 100644
index 000000000000..1b4780197381
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_dma.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  arch/arm/mach-omap1/include/mach/lcd_dma.h
+ *
+ * Extracted from arch/arm/plat-omap/include/plat/dma.h
+ *  Copyright (C) 2003 Nokia Corporation
+ *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+#ifndef __MACH_OMAP1_LCD_DMA_H__
+#define __MACH_OMAP1_LCD_DMA_H__
+
+/* Hardware registers for LCD DMA */
+#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
+#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
+#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
+#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
+#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
+#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
+
+#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
+#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
+#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
+#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
+#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
+#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
+#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
+#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
+#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
+#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
+#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
+#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
+#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
+#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
+#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
+
+/* LCD DMA block numbers */
+enum {
+	OMAP_LCD_DMA_B1_TOP,
+	OMAP_LCD_DMA_B1_BOTTOM,
+	OMAP_LCD_DMA_B2_TOP,
+	OMAP_LCD_DMA_B2_BOTTOM
+};
+
+/* LCD DMA functions */
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+				void *data);
+extern void omap_free_lcd_dma(void);
+extern void omap_setup_lcd_dma(void);
+extern void omap_enable_lcd_dma(void);
+extern void omap_stop_lcd_dma(void);
+extern void omap_set_lcd_dma_ext_controller(int external);
+extern void omap_set_lcd_dma_single_transfer(int single);
+extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+				int data_type);
+extern void omap_set_lcd_dma_b1_rotation(int rotate);
+extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
+extern void omap_set_lcd_dma_b1_mirror(int mirror);
+extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+
+#endif /* __MACH_OMAP1_LCD_DMA_H__ */
diff --git a/drivers/video/fbdev/omap/lcd_inn1510.c b/drivers/video/fbdev/omap/lcd_inn1510.c
index 776e7f8d656e..bb915637e9b6 100644
--- a/drivers/video/fbdev/omap/lcd_inn1510.c
+++ b/drivers/video/fbdev/omap/lcd_inn1510.c
@@ -10,19 +10,21 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
+#include <linux/soc/ti/omap1-soc.h>
 
 #include "omapfb.h"
 
+static void __iomem *omap1510_fpga_lcd_panel_control;
+
 static int innovator1510_panel_enable(struct lcd_panel *panel)
 {
-	__raw_writeb(0x7, OMAP1510_FPGA_LCD_PANEL_CONTROL);
+	__raw_writeb(0x7, omap1510_fpga_lcd_panel_control);
 	return 0;
 }
 
 static void innovator1510_panel_disable(struct lcd_panel *panel)
 {
-	__raw_writeb(0x0, OMAP1510_FPGA_LCD_PANEL_CONTROL);
+	__raw_writeb(0x0, omap1510_fpga_lcd_panel_control);
 }
 
 static struct lcd_panel innovator1510_panel = {
@@ -48,6 +50,7 @@ static struct lcd_panel innovator1510_panel = {
 
 static int innovator1510_panel_probe(struct platform_device *pdev)
 {
+	omap1510_fpga_lcd_panel_control = (void __iomem *)pdev->dev.platform_data;
 	omapfb_register_panel(&innovator1510_panel);
 	return 0;
 }
diff --git a/drivers/video/fbdev/omap/lcd_osk.c b/drivers/video/fbdev/omap/lcd_osk.c
index 5d5762128c8d..8168ba0d47fd 100644
--- a/drivers/video/fbdev/omap/lcd_osk.c
+++ b/drivers/video/fbdev/omap/lcd_osk.c
@@ -11,8 +11,8 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
-#include <mach/hardware.h>
-#include <mach/mux.h>
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-mux.h>
 
 #include "omapfb.h"
 
diff --git a/drivers/video/fbdev/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c
index 97d20dc0d1d0..e7ce783e5215 100644
--- a/drivers/video/fbdev/omap/lcdc.c
+++ b/drivers/video/fbdev/omap/lcdc.c
@@ -17,7 +17,8 @@
 #include <linux/clk.h>
 #include <linux/gfp.h>
 
-#include <mach/lcdc.h>
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-soc.h>
 #include <linux/omap-dma.h>
 
 #include <asm/mach-types.h>
@@ -25,6 +26,7 @@
 #include "omapfb.h"
 
 #include "lcdc.h"
+#include "lcd_dma.h"
 
 #define MODULE_NAME			"lcdc"
 
@@ -713,7 +715,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
 	}
 	clk_prepare_enable(lcdc.lcd_ck);
 
-	r = request_irq(OMAP_LCDC_IRQ, lcdc_irq_handler, 0, MODULE_NAME, fbdev);
+	r = request_irq(fbdev->int_irq, lcdc_irq_handler, 0, MODULE_NAME, fbdev);
 	if (r) {
 		dev_err(fbdev->dev, "unable to get IRQ\n");
 		goto fail2;
@@ -744,7 +746,7 @@ fail5:
 fail4:
 	omap_free_lcd_dma();
 fail3:
-	free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
+	free_irq(fbdev->int_irq, lcdc.fbdev);
 fail2:
 	clk_disable_unprepare(lcdc.lcd_ck);
 fail1:
@@ -759,7 +761,7 @@ static void omap_lcdc_cleanup(void)
 		free_palette_ram();
 	free_fbmem();
 	omap_free_lcd_dma();
-	free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
+	free_irq(lcdc.fbdev->int_irq, lcdc.fbdev);
 	clk_disable_unprepare(lcdc.lcd_ck);
 	clk_put(lcdc.lcd_ck);
 }
diff --git a/drivers/video/fbdev/omap/lcdc.h b/drivers/video/fbdev/omap/lcdc.h
index 8a7607d861c1..cbbfd9b9e949 100644
--- a/drivers/video/fbdev/omap/lcdc.h
+++ b/drivers/video/fbdev/omap/lcdc.h
@@ -1,6 +1,41 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #ifndef LCDC_H
 #define LCDC_H
+/*
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ */
+#define OMAP_LCDC_BASE			0xfffec000
+#define OMAP_LCDC_SIZE			256
+#define OMAP_LCDC_IRQ			INT_LCD_CTRL
+
+#define OMAP_LCDC_CONTROL		(OMAP_LCDC_BASE + 0x00)
+#define OMAP_LCDC_TIMING0		(OMAP_LCDC_BASE + 0x04)
+#define OMAP_LCDC_TIMING1		(OMAP_LCDC_BASE + 0x08)
+#define OMAP_LCDC_TIMING2		(OMAP_LCDC_BASE + 0x0c)
+#define OMAP_LCDC_STATUS		(OMAP_LCDC_BASE + 0x10)
+#define OMAP_LCDC_SUBPANEL		(OMAP_LCDC_BASE + 0x14)
+#define OMAP_LCDC_LINE_INT		(OMAP_LCDC_BASE + 0x18)
+#define OMAP_LCDC_DISPLAY_STATUS	(OMAP_LCDC_BASE + 0x1c)
+
+#define OMAP_LCDC_STAT_DONE		(1 << 0)
+#define OMAP_LCDC_STAT_VSYNC		(1 << 1)
+#define OMAP_LCDC_STAT_SYNC_LOST	(1 << 2)
+#define OMAP_LCDC_STAT_ABC		(1 << 3)
+#define OMAP_LCDC_STAT_LINE_INT		(1 << 4)
+#define OMAP_LCDC_STAT_FUF		(1 << 5)
+#define OMAP_LCDC_STAT_LOADED_PALETTE	(1 << 6)
+
+#define OMAP_LCDC_CTRL_LCD_EN		(1 << 0)
+#define OMAP_LCDC_CTRL_LCD_TFT		(1 << 7)
+#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL	(1 << 10)
+
+#define OMAP_LCDC_IRQ_VSYNC		(1 << 2)
+#define OMAP_LCDC_IRQ_DONE		(1 << 3)
+#define OMAP_LCDC_IRQ_LOADED_PALETTE	(1 << 4)
+#define OMAP_LCDC_IRQ_LINE_NIRQ		(1 << 5)
+#define OMAP_LCDC_IRQ_LINE		(1 << 6)
+#define OMAP_LCDC_IRQ_MASK		(((1 << 5) - 1) << 2)
 
 int omap_lcdc_set_dma_callback(void (*callback)(void *data), void *data);
 void omap_lcdc_free_dma_callback(void);
diff --git a/drivers/video/fbdev/omap/omapfb.h b/drivers/video/fbdev/omap/omapfb.h
index d930152c289c..313a051fe7a4 100644
--- a/drivers/video/fbdev/omap/omapfb.h
+++ b/drivers/video/fbdev/omap/omapfb.h
@@ -204,6 +204,8 @@ struct omapfb_device {
 	struct lcd_panel	*panel;			/* LCD panel */
 	const struct lcd_ctrl	*ctrl;			/* LCD controller */
 	const struct lcd_ctrl	*int_ctrl;		/* internal LCD ctrl */
+	int			ext_irq;
+	int			int_irq;
 	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
 							   interface */
 	struct device		*dev;
diff --git a/drivers/video/fbdev/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c
index 083388a4ceeb..292fcb0a24fc 100644
--- a/drivers/video/fbdev/omap/omapfb_main.c
+++ b/drivers/video/fbdev/omap/omapfb_main.c
@@ -20,8 +20,7 @@
 
 #include <linux/omap-dma.h>
 
-#include <mach/hardware.h>
-
+#include <linux/soc/ti/omap1-soc.h>
 #include "omapfb.h"
 #include "lcdc.h"
 
@@ -1624,7 +1623,7 @@ static int omapfb_do_probe(struct platform_device *pdev,
 
 	init_state = 0;
 
-	if (pdev->num_resources != 0) {
+	if (pdev->num_resources != 2) {
 		dev_err(&pdev->dev, "probed for an unknown device\n");
 		r = -ENODEV;
 		goto cleanup;
@@ -1643,6 +1642,20 @@ static int omapfb_do_probe(struct platform_device *pdev,
 		r = -ENOMEM;
 		goto cleanup;
 	}
+	fbdev->int_irq = platform_get_irq(pdev, 0);
+	if (!fbdev->int_irq) {
+		dev_err(&pdev->dev, "unable to get irq\n");
+		r = ENXIO;
+		goto cleanup;
+	}
+
+	fbdev->ext_irq = platform_get_irq(pdev, 1);
+	if (!fbdev->ext_irq) {
+		dev_err(&pdev->dev, "unable to get irq\n");
+		r = ENXIO;
+		goto cleanup;
+	}
+
 	init_state++;
 
 	fbdev->dev = &pdev->dev;
diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index b9cb8b386627..c90eb8ca58af 100644
--- a/drivers/video/fbdev/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
@@ -13,8 +13,10 @@
 #include <linux/interrupt.h>
 
 #include <linux/omap-dma.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include "omapfb.h"
+#include "lcd_dma.h"
 #include "lcdc.h"
 
 #define MODULE_NAME		"omapfb-sossi"
@@ -638,7 +640,7 @@ static int sossi_init(struct omapfb_device *fbdev)
 	l &= ~(1 << 31); /* REORDERING */
 	sossi_write_reg(SOSSI_INIT1_REG, l);
 
-	if ((r = request_irq(INT_1610_SoSSI_MATCH, sossi_match_irq,
+	if ((r = request_irq(fbdev->ext_irq, sossi_match_irq,
 			     IRQ_TYPE_EDGE_FALLING,
 	     "sossi_match", sossi.fbdev->dev)) < 0) {
 		dev_err(sossi.fbdev->dev, "can't get SoSSI match IRQ\n");