Merge tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

Pull dmaengine updates from Vinod Koul:
 "The last dmaengine updates for this year :)

  This contains couple of new drivers, new device support and updates to
  bunch of drivers.

  New drivers/devices:
   - Qualcomm ADM driver
   - Qualcomm GPI driver
   - Allwinner A100 DMA support
   - Microchip Sama7g5 support
   - Mediatek MT8516 apdma

  Updates:
   - more updates to idxd driver and support for IAX config
   - runtime PM support for dw driver
   - TI drivers"

* tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits)
  soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init
  dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA
  dmaengine: ti: k3-udma: Initial support for K3 PKTDMA
  dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling
  dmaengine: ti: k3-udma: Initial support for K3 BCDMA
  soc: ti: k3-ringacc: add AM64 DMA rings support.
  dmaengine: ti: Add support for k3 event routers
  dmaengine: ti: k3-psil: Add initial map for AM64
  dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA
  dt-bindings: dma: ti: Add document for K3 PKTDMA
  dt-bindings: dma: ti: Add document for K3 BCDMA
  dmaengine: dmatest: Use dmaengine_get_dma_device
  dmaengine: doc: client: Update for dmaengine_get_dma_device() usage
  dmaengine: Add support for per channel coherency handling
  dmaengine: of-dma: Add support for optional router configuration callback
  dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings
  dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev
  dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API
  dmaengine: ti: k3-udma: Add support for second resource range from sysfw
  dmaengine: ti: k3-udma: Wait for peer teardown completion if supported
  ...

1 files changed, 83 insertions, 0 deletions

diff --git a/include/linux/dma/qcom-gpi-dma.h b/include/linux/dma/qcom-gpi-dma.h
new file mode 100644
index 000000000000..f46dc3372f11
--- /dev/null
+++ b/include/linux/dma/qcom-gpi-dma.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+#ifndef QCOM_GPI_DMA_H
+#define QCOM_GPI_DMA_H
+
+/**
+ * enum spi_transfer_cmd - spi transfer commands
+ */
+enum spi_transfer_cmd {
+	SPI_TX = 1,
+	SPI_RX,
+	SPI_DUPLEX,
+};
+
+/**
+ * struct gpi_spi_config - spi config for peripheral
+ *
+ * @loopback_en: spi loopback enable when set
+ * @clock_pol_high: clock polarity
+ * @data_pol_high: data polarity
+ * @pack_en: process tx/rx buffers as packed
+ * @word_len: spi word length
+ * @clk_div: source clock divider
+ * @clk_src: serial clock
+ * @cmd: spi cmd
+ * @fragmentation: keep CS assserted at end of sequence
+ * @cs: chip select toggle
+ * @set_config: set peripheral config
+ * @rx_len: receive length for buffer
+ */
+struct gpi_spi_config {
+	u8 set_config;
+	u8 loopback_en;
+	u8 clock_pol_high;
+	u8 data_pol_high;
+	u8 pack_en;
+	u8 word_len;
+	u8 fragmentation;
+	u8 cs;
+	u32 clk_div;
+	u32 clk_src;
+	enum spi_transfer_cmd cmd;
+	u32 rx_len;
+};
+
+enum i2c_op {
+	I2C_WRITE = 1,
+	I2C_READ,
+};
+
+/**
+ * struct gpi_i2c_config - i2c config for peripheral
+ *
+ * @pack_enable: process tx/rx buffers as packed
+ * @cycle_count: clock cycles to be sent
+ * @high_count: high period of clock
+ * @low_count: low period of clock
+ * @clk_div: source clock divider
+ * @addr: i2c bus address
+ * @stretch: stretch the clock at eot
+ * @set_config: set peripheral config
+ * @rx_len: receive length for buffer
+ * @op: i2c cmd
+ * @muli-msg: is part of multi i2c r-w msgs
+ */
+struct gpi_i2c_config {
+	u8 set_config;
+	u8 pack_enable;
+	u8 cycle_count;
+	u8 high_count;
+	u8 low_count;
+	u8 addr;
+	u8 stretch;
+	u16 clk_div;
+	u32 rx_len;
+	enum i2c_op op;
+	bool multi_msg;
+};
+
+#endif /* QCOM_GPI_DMA_H */