summaryrefslogtreecommitdiff
path: root/include/linux/mdio.h
diff options
context:
space:
mode:
authorSergei Shtylyov <sergei.shtylyov@cogentembedded.com>2017-12-04 15:35:05 +0300
committerDavid S. Miller <davem@davemloft.net>2017-12-05 20:51:19 +0300
commitbafbdd527d569c8200521f2f7579f65a044271be (patch)
tree51db9962c079c2ca76a5e9f6d3cb2dc222999c37 /include/linux/mdio.h
parent62b32379fd124fea521484ba7e220d8a449f0b59 (diff)
downloadlinux-bafbdd527d569c8200521f2f7579f65a044271be.tar.xz
phylib: Add device reset GPIO support
The PHY devices sometimes do have their reset signal (maybe even power supply?) tied to some GPIO and sometimes it also does happen that a boot loader does not leave it deasserted. So far this issue has been attacked from (as I believe) a wrong angle: by teaching the MAC driver to manipulate the GPIO in question; that solution, when applied to the device trees, led to adding the PHY reset GPIO properties to the MAC device node, with one exception: Cadence MACB driver which could handle the "reset-gpios" prop in a PHY device subnode. I believe that the correct approach is to teach the 'phylib' to get the MDIO device reset GPIO from the device tree node corresponding to this device -- which this patch is doing... Note that I had to modify the AT803x PHY driver as it would stop working otherwise -- it made use of the reset GPIO for its own purposes... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> [geert: Propagate actual errors from fwnode_get_named_gpiod()] [geert: Avoid destroying initial setup] [geert: Consolidate GPIO descriptor acquiring code] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include/linux/mdio.h')
-rw-r--r--include/linux/mdio.h3
1 files changed, 3 insertions, 0 deletions
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index ca08ab16ecdc..92d4e55ffe67 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -12,6 +12,7 @@
#include <uapi/linux/mdio.h>
#include <linux/mod_devicetable.h>
+struct gpio_desc;
struct mii_bus;
/* Multiple levels of nesting are possible. However typically this is
@@ -39,6 +40,7 @@ struct mdio_device {
/* Bus address of the MDIO device (0-31) */
int addr;
int flags;
+ struct gpio_desc *reset;
};
#define to_mdio_device(d) container_of(d, struct mdio_device, dev)
@@ -71,6 +73,7 @@ void mdio_device_free(struct mdio_device *mdiodev);
struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr);
int mdio_device_register(struct mdio_device *mdiodev);
void mdio_device_remove(struct mdio_device *mdiodev);
+void mdio_device_reset(struct mdio_device *mdiodev, int value);
int mdio_driver_register(struct mdio_driver *drv);
void mdio_driver_unregister(struct mdio_driver *drv);
int mdio_device_bus_match(struct device *dev, struct device_driver *drv);