summaryrefslogtreecommitdiff
path: root/include/linux/regulator
diff options
context:
space:
mode:
authorLaxman Dewangan <ldewangan@nvidia.com>2016-03-02 13:54:46 +0300
committerMark Brown <broonie@kernel.org>2016-03-02 17:13:05 +0300
commit670666b9e0aff40c65d8061a2f53e79eee238685 (patch)
tree04660dbf7aa36d14372c31d58a6647af77c94415 /include/linux/regulator
parentbd667d40a999e35c270e424b6d550410cb2c6d06 (diff)
downloadlinux-670666b9e0aff40c65d8061a2f53e79eee238685.tar.xz
regulator: core: Add support for active-discharge configuration
Add support to enable/disable active discharge of regulator via machine constraints. This configuration is done when setting machine constraint during regulator register and if regulator driver implemented the callback ops. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'include/linux/regulator')
-rw-r--r--include/linux/regulator/driver.h3
-rw-r--r--include/linux/regulator/machine.h12
2 files changed, 15 insertions, 0 deletions
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 16ac9e108806..59dbaf78a25c 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -93,6 +93,8 @@ struct regulator_linear_range {
* @get_current_limit: Get the configured limit for a current-limited regulator.
* @set_input_current_limit: Configure an input limit.
*
+ * @set_active_discharge: Set active discharge enable/disable of regulators.
+ *
* @set_mode: Set the configured operating mode for the regulator.
* @get_mode: Get the configured operating mode for the regulator.
* @get_status: Return actual (not as-configured) status of regulator, as a
@@ -149,6 +151,7 @@ struct regulator_ops {
int (*set_input_current_limit) (struct regulator_dev *, int lim_uA);
int (*set_over_current_protection) (struct regulator_dev *);
+ int (*set_active_discharge) (struct regulator_dev *, bool enable);
/* enable/disable regulator */
int (*enable) (struct regulator_dev *);
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index a1067d0b3991..5d627c83a630 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -42,6 +42,13 @@ struct regulator;
#define REGULATOR_CHANGE_DRMS 0x10
#define REGULATOR_CHANGE_BYPASS 0x20
+/* Regulator active discharge flags */
+enum regulator_active_discharge {
+ REGULATOR_ACTIVE_DISCHARGE_DEFAULT,
+ REGULATOR_ACTIVE_DISCHARGE_DISABLE,
+ REGULATOR_ACTIVE_DISCHARGE_ENABLE,
+};
+
/**
* struct regulator_state - regulator state during low power system states
*
@@ -100,6 +107,9 @@ struct regulator_state {
* @initial_state: Suspend state to set by default.
* @initial_mode: Mode to set at startup.
* @ramp_delay: Time to settle down after voltage change (unit: uV/us)
+ * @active_discharge: Enable/disable active discharge. The enum
+ * regulator_active_discharge values are used for
+ * initialisation.
* @enable_time: Turn-on time of the rails (unit: microseconds)
*/
struct regulation_constraints {
@@ -140,6 +150,8 @@ struct regulation_constraints {
unsigned int ramp_delay;
unsigned int enable_time;
+ unsigned int active_discharge;
+
/* constraint flags */
unsigned always_on:1; /* regulator never off when system is on */
unsigned boot_on:1; /* bootloader/firmware enabled regulator */