summaryrefslogtreecommitdiff
path: root/include/linux/soc
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-05-05 04:03:51 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2017-05-05 04:03:51 +0300
commit8f28472a739e8e39adc6e64ee5b460df039f0e4f (patch)
tree979e35f3d1d2be94c06c942bcdc9ee68cbebaacb /include/linux/soc
parent4ac4d584886a4f47f8ff3bca0f32ff9a2987d3e5 (diff)
parentc034a43e72dda58e4a184d71f5502ef356e04453 (diff)
downloadlinux-8f28472a739e8e39adc6e64ee5b460df039f0e4f.tar.xz
Merge tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH: "Here is the big USB patchset for 4.12-rc1. Lots of good stuff here, after many many many attempts, the kernel finally has a working typeC interface, many thanks to Heikki and Guenter and others who have taken the time to get this merged. It wasn't an easy path for them at all. There's also a staging driver that uses this new api, which is why it's coming in through this tree. Along with that, there's the usual huge number of changes for gadget drivers, xhci, and other stuff. Johan also finally refactored pretty much every driver that was looking at USB endpoints to do it in a common way, which will help prevent any "badly-formed" devices from causing problems in drivers. That too wasn't a simple task. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) staging: typec: Fairchild FUSB302 Type-c chip driver staging: typec: Type-C Port Controller Interface driver (tcpci) staging: typec: USB Type-C Port Manager (tcpm) usb: host: xhci: remove #ifdef around PM functions usb: musb: don't mark of_dev_auxdata as initdata usb: misc: legousbtower: Fix buffers on stack USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications" usb: Make sure usb/phy/of gets built-in USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h usb: host: xhci: print correct command ring address usb: host: xhci: delete sp_dma_buffers for scratchpad usb: host: xhci: using correct specification chapter reference for DCBAAP xhci: switch to pci_alloc_irq_vectors usb: host: xhci-plat: set resume_quirk() for R-Car controllers usb: host: xhci-plat: add resume_quirk() usb: host: xhci-plat: enable clk in resume timing usb: host: plat: Enable xHCI plat runtime PM USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit USB: serial: constify static arrays usb: fix some references for /proc/bus/usb ...
Diffstat (limited to 'include/linux/soc')
-rw-r--r--include/linux/soc/samsung/exynos-regs-pmu.h16
1 files changed, 15 insertions, 1 deletions
diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
index 49df0a01a2cc..bebdde5dccd6 100644
--- a/include/linux/soc/samsung/exynos-regs-pmu.h
+++ b/include/linux/soc/samsung/exynos-regs-pmu.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2015 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS - Power management unit definition
@@ -50,6 +50,14 @@
#define S5P_WAKEUP_MASK 0x0608
#define S5P_WAKEUP_MASK2 0x0614
+/* MIPI_PHYn_CONTROL, valid for Exynos3250, Exynos4, Exynos5250 and Exynos5433 */
+#define EXYNOS4_MIPI_PHY_CONTROL(n) (0x0710 + (n) * 4)
+/* Phy enable bit, common for all phy registers, not only MIPI */
+#define EXYNOS4_PHY_ENABLE (1 << 0)
+#define EXYNOS4_MIPI_PHY_SRESETN (1 << 1)
+#define EXYNOS4_MIPI_PHY_MRESETN (1 << 2)
+#define EXYNOS4_MIPI_PHY_RESET_MASK (3 << 1)
+
#define S5P_INFORM0 0x0800
#define S5P_INFORM1 0x0804
#define S5P_INFORM5 0x0814
@@ -342,6 +350,8 @@
#define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408
#define EXYNOS5_MASK_WDTRESET_REQUEST 0x040C
+#define EXYNOS5_USBDRD_PHY_CONTROL 0x0704
+#define EXYNOS5_DPTX_PHY_CONTROL 0x0720
#define EXYNOS5_USE_RETENTION BIT(4)
#define EXYNOS5_SYS_WDTRESET (1 << 20)
@@ -495,6 +505,9 @@
#define EXYNOS5420_KFC_CORE_RESET(_nr) \
((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
+#define EXYNOS5420_USBDRD1_PHY_CONTROL 0x0708
+#define EXYNOS5420_MIPI_PHY_CONTROL(n) (0x0714 + (n) * 4)
+#define EXYNOS5420_DPTX_PHY_CONTROL 0x0728
#define EXYNOS5420_ARM_CORE2_SYS_PWR_REG 0x1020
#define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG 0x1024
#define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG 0x1028
@@ -632,6 +645,7 @@
| EXYNOS5420_KFC_USE_STANDBY_WFI3)
/* For EXYNOS5433 */
+#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x0728)
#define EXYNOS5433_PAD_RETENTION_AUD_OPTION (0x3028)
#define EXYNOS5433_PAD_RETENTION_MMC2_OPTION (0x30C8)
#define EXYNOS5433_PAD_RETENTION_TOP_OPTION (0x3108)