summaryrefslogtreecommitdiff
path: root/include/linux/ssb
diff options
context:
space:
mode:
authorLarry Finger <Larry.Finger@lwfinger.net>2007-11-10 01:54:45 +0300
committerDavid S. Miller <davem@davemloft.net>2008-01-29 02:04:40 +0300
commitac82fab44f6b981e3f6b53784e2f23838f4908e1 (patch)
treebc1f0ccb118aff495ee2b9448e8fd51b92958298 /include/linux/ssb
parent3957ccb56e17ca839265ccb292c4c6850dcf5d32 (diff)
downloadlinux-ac82fab44f6b981e3f6b53784e2f23838f4908e1.tar.xz
ssb: Add new SPROM structure while keeping the old
The SPROM's for various devices utilizing the Sonics Silicon Backplane come with various revisions. The Revision 2 SPROM inherited the data layout of 1, and Revision 3 inherited the layout of 2. The first instance of Revision 4 has now been found in a BCM4328 wireless LAN card. This device does not inherit any layout from previous versions. Although it was possible to create a data structure that kept all the old layouts, we decided to start fresh, keep only those SPROM variables that are used by the drivers that utilize ssb, and to do the conversion in such a manner that neither compilation or execution will be affected if a bisection lands in the middle of these changes, while keeping the patches as small as possible. In this patch, the sprom structures are changed while maintaining the old ones. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'include/linux/ssb')
-rw-r--r--include/linux/ssb/ssb.h32
-rw-r--r--include/linux/ssb/ssb_regs.h32
2 files changed, 58 insertions, 6 deletions
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 2b5c312c4960..cdd8a2fd4a69 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -78,13 +78,34 @@ struct ssb_sprom_r3 {
u32 ofdmgpo; /* G-PHY OFDM Power Offset */
};
-struct ssb_sprom_r4 {
- /* TODO */
-};
-
struct ssb_sprom {
u8 revision;
- u8 crc;
+ u8 temp_fill[2 * sizeof(struct ssb_sprom_r1)];
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+ u8 et0mac[6]; /* MAC address for Ethernet */
+ u8 et1mac[6]; /* MAC address for 802.11a */
+ u8 et0phyaddr; /* MII address for enet0 */
+ u8 et1phyaddr; /* MII address for enet1 */
+ u8 country_code; /* Country Code */
+ u16 pa0b0;
+ u16 pa0b1;
+ u16 pa0b2;
+ u16 pa1b0;
+ u16 pa1b1;
+ u16 pa1b2;
+ u8 gpio0; /* GPIO pin 0 */
+ u8 gpio1; /* GPIO pin 1 */
+ u8 gpio2; /* GPIO pin 2 */
+ u8 gpio3; /* GPIO pin 3 */
+ u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */
+ u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
+ u8 itssi_a; /* Idle TSSI Target for A-PHY */
+ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
+ u16 boardflags_lo; /* Boardflags (low 16 bits) */
+ u8 antenna_gain_a; /* A-PHY Antenna gain (in dBm Q5.2) */
+ u8 antenna_gain_bg; /* B/G-PHY Antenna gain (in dBm Q5.2) */
+
+ /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
/* The valid r# fields are selected by the "revision".
* Revision 3 and lower inherit from lower revisions.
*/
@@ -94,7 +115,6 @@ struct ssb_sprom {
struct ssb_sprom_r2 r2;
struct ssb_sprom_r3 r3;
};
- struct ssb_sprom_r4 r4;
};
};
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index 47c7c71a5acf..bcebcffd448b 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -250,6 +250,38 @@
#define SSB_SPROM3_CCKPO_11M 0xF000 /* 11M Rate PO */
#define SSB_SPROM3_CCKPO_11M_SHIFT 12
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+/* SPROM Revision 4 */
+#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for b/g */
+#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings */
+#define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
+#define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
+#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
+#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
+#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
+#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */
+#define SSB_SPROM4_ANT_A 0x105D /* A Antennas */
+#define SSB_SPROM4_ANT_BG 0x105C /* B/G Antennas */
+#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */
+#define SSB_SPROM4_AGAIN 0x105E /* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */
+#define SSB_SPROM4_MAXP_A 0x1000 /* Max Power A */
+#define SSB_SPROM4_MAXP_A_HI 0x00FF /* Mask for Hi */
+#define SSB_SPROM4_MAXP_A_LO 0xFF00 /* Mask for Lo */
+#define SSB_SPROM4_MAXP_A_LO_SHIFT 16 /* Shift for Lo */
+#define SSB_SPROM4_PA1LOB0 0x1000
+#define SSB_SPROM4_PA1LOB1 0x1000
+#define SSB_SPROM4_PA1LOB2 0x1000
+#define SSB_SPROM4_PA1HIB0 0x1000
+#define SSB_SPROM4_PA1HIB1 0x1000
+#define SSB_SPROM4_PA1HIB2 0x1000
+#define SSB_SPROM4_OPO 0x1000
+#define SSB_SPROM4_OPO_VALUE 0x0000
+#define SSB_SPROM4_GPIOLDC 0x105A /* LED Powersave Duty Cycle */
+#define SSB_SPROM4_GPIOLDC_OFF 0x0000FF00 /* Off Count */
+#define SSB_SPROM4_GPIOLDC_OFF_SHIFT 8
+#define SSB_SPROM4_GPIOLDC_ON 0x00FF0000 /* On Count */
+#define SSB_SPROM4_GPIOLDC_ON_SHIFT 16
+
/* Values for SSB_SPROM1_BINF_CCODE */
enum {