Merge tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB patch set for the 3.6-rc1 merge window.

  Lots of little changes in here, primarily for gadget controllers and
  drivers.  There's some scsi changes that I think also went in through
  the scsi tree, but they merge just fine.  All of these patches have
  been in the linux-next tree for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up trivial conflicts in include/scsi/scsi_device.h (same libata
conflict that Jeff had already encountered)

* tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  usb: Add quirk detection based on interface information
  usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h
  USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
  USB: notify phy when root hub port connect change
  USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds
  USB: option: add ZTE MF821D
  USB: sierra: QMI mode MC7710 moved to qcserial
  USB: qcserial: adding Sierra Wireless devices
  USB: qcserial: support generic Qualcomm serial ports
  USB: qcserial: make probe more flexible
  USB: qcserial: centralize probe exit path
  USB: qcserial: consolidate usb_set_interface calls
  USB: ehci-s5p: Add support for device tree
  USB: ohci-exynos: Add support for device tree
  USB: ehci-omap: fix compile failure(v1)
  usb: host: tegra: pass correct pointer in ehci_setup()
  USB: ehci-fsl: Update ifdef check to work on 64-bit ppc
  USB: serial: keyspan: Removed unrequired parentheses.
  ...

7 files changed, 179 insertions, 14 deletions

diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index edb90d6cfd12..544825dde823 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -5,12 +5,15 @@
 #ifndef __LINUX_USB_CHIPIDEA_H
 #define __LINUX_USB_CHIPIDEA_H
 
+#include <linux/usb/otg.h>
+
 struct ci13xxx;
-struct ci13xxx_udc_driver {
+struct ci13xxx_platform_data {
 	const char	*name;
 	/* offset of the capability registers */
 	uintptr_t	 capoffset;
 	unsigned	 power_budget;
+	struct usb_phy	*phy;
 	unsigned long	 flags;
 #define CI13XXX_REGS_SHARED		BIT(0)
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
@@ -19,10 +22,17 @@ struct ci13xxx_udc_driver {
 
 #define CI13XXX_CONTROLLER_RESET_EVENT		0
 #define CI13XXX_CONTROLLER_STOPPED_EVENT	1
-	void	(*notify_event) (struct ci13xxx *udc, unsigned event);
+	void	(*notify_event) (struct ci13xxx *ci, unsigned event);
 };
 
 /* Default offset of capability registers */
 #define DEF_CAPOFFSET		0x100
 
+/* Add ci13xxx device */
+struct platform_device *ci13xxx_add_device(struct device *dev,
+			struct resource *res, int nres,
+			struct ci13xxx_platform_data *platdata);
+/* Remove ci13xxx device */
+void ci13xxx_remove_device(struct platform_device *pdev);
+
 #endif
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
index 7cc95ee3606b..de4b9ed5d5dd 100644
--- a/include/linux/usb/ehci_def.h
+++ b/include/linux/usb/ehci_def.h
@@ -111,7 +111,13 @@ struct ehci_regs {
 	/* ASYNCLISTADDR: offset 0x18 */
 	u32		async_next;	/* address of next async queue head */
 
-	u32		reserved[9];
+	u32		reserved1[2];
+
+	/* TXFILLTUNING: offset 0x24 */
+	u32		txfill_tuning;	/* TX FIFO Tuning register */
+#define TXFIFO_DEFAULT	(8<<16)		/* FIFO burst threshold 8 */
+
+	u32		reserved2[6];
 
 	/* CONFIGFLAG: offset 0x40 */
 	u32		configured_flag;
@@ -155,26 +161,34 @@ struct ehci_regs {
 #define PORT_CSC	(1<<1)		/* connect status change */
 #define PORT_CONNECT	(1<<0)		/* device connected */
 #define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
-};
 
-#define USBMODE		0x68		/* USB Device mode */
+	u32		reserved3[9];
+
+	/* USBMODE: offset 0x68 */
+	u32		usbmode;	/* USB Device mode */
 #define USBMODE_SDIS	(1<<3)		/* Stream disable */
 #define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
 #define USBMODE_CM_HC	(3<<0)		/* host controller mode */
 #define USBMODE_CM_IDLE	(0<<0)		/* idle state */
 
+	u32		reserved4[7];
+
 /* Moorestown has some non-standard registers, partially due to the fact that
  * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
  * PORTSCx
  */
-#define HOSTPC0		0x84		/* HOSTPC extension */
+	/* HOSTPC: offset 0x84 */
+	u32		hostpc[0];	/* HOSTPC extension */
 #define HOSTPC_PHCD	(1<<22)		/* Phy clock disable */
 #define HOSTPC_PSPD	(3<<25)		/* Port speed detection */
-#define USBMODE_EX	0xc8		/* USB Device mode extension */
+
+	u32		reserved5[17];
+
+	/* USBMODE_EX: offset 0xc8 */
+	u32		usbmode_ex;	/* USB Device mode extension */
 #define USBMODE_EX_VBPS	(1<<5)		/* VBus Power Select On */
 #define USBMODE_EX_HC	(3<<0)		/* host controller mode */
-#define TXFILLTUNING	0x24		/* TX FIFO Tuning register */
-#define TXFIFO_DEFAULT	(8<<16)		/* FIFO burst threshold 8 */
+};
 
 /* Appendix C, Debug port ... intended for use with special "debug devices"
  * that can help if there's no serial console.  (nonstandard enumeration.)
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 49b3ac29726a..c5fdb148fc02 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -93,6 +93,12 @@ struct usb_hcd {
 	 */
 	const struct hc_driver	*driver;	/* hw-specific hooks */
 
+	/*
+	 * OTG and some Host controllers need software interaction with phys;
+	 * other external phys should be software-transparent
+	 */
+	struct usb_phy	*phy;
+
 	/* Flags that need to be manipulated atomically because they can
 	 * change while the host controller is running.  Always use
 	 * set_bit() or clear_bit() to change their values.
diff --git a/include/linux/usb/musb-omap.h b/include/linux/usb/musb-omap.h
new file mode 100644
index 000000000000..7774c5986f07
--- /dev/null
+++ b/include/linux/usb/musb-omap.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2011-2012 by Texas Instruments
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __MUSB_OMAP_H__
+#define __MUSB_OMAP_H__
+
+enum omap_musb_vbus_id_status {
+	OMAP_MUSB_UNKNOWN = 0,
+	OMAP_MUSB_ID_GROUND,
+	OMAP_MUSB_ID_FLOAT,
+	OMAP_MUSB_VBUS_VALID,
+	OMAP_MUSB_VBUS_OFF,
+};
+
+#if (defined(CONFIG_USB_MUSB_OMAP2PLUS) || \
+				defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE))
+void omap_musb_mailbox(enum omap_musb_vbus_id_status status);
+#else
+static inline void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
+{
+}
+#endif
+
+#endif	/* __MUSB_OMAP_H__ */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 38ab3f46346f..45824be0a2f9 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -43,6 +43,13 @@ enum usb_phy_events {
 	USB_EVENT_ENUMERATED,   /* gadget driver enumerated */
 };
 
+/* associate a type with PHY */
+enum usb_phy_type {
+	USB_PHY_TYPE_UNDEFINED,
+	USB_PHY_TYPE_USB2,
+	USB_PHY_TYPE_USB3,
+};
+
 struct usb_phy;
 
 /* for transceivers connected thru an ULPI interface, the user must
@@ -89,6 +96,7 @@ struct usb_phy {
 	const char		*label;
 	unsigned int		 flags;
 
+	enum usb_phy_type	type;
 	enum usb_otg_state	state;
 	enum usb_phy_events	last_event;
 
@@ -105,6 +113,9 @@ struct usb_phy {
 	u16			port_status;
 	u16			port_change;
 
+	/* to support controllers that have multiple transceivers */
+	struct list_head	head;
+
 	/* initialize/shutdown the OTG controller */
 	int	(*init)(struct usb_phy *x);
 	void	(*shutdown)(struct usb_phy *x);
@@ -117,11 +128,15 @@ struct usb_phy {
 	int	(*set_suspend)(struct usb_phy *x,
 				int suspend);
 
+	/* notify phy connect status change */
+	int	(*notify_connect)(struct usb_phy *x, int port);
+	int	(*notify_disconnect)(struct usb_phy *x, int port);
 };
 
 
 /* for board-specific init logic */
-extern int usb_set_transceiver(struct usb_phy *);
+extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type);
+extern void usb_remove_phy(struct usb_phy *);
 
 #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
 /* sometimes transceivers are accessed only through e.g. ULPI */
@@ -172,16 +187,29 @@ usb_phy_shutdown(struct usb_phy *x)
 
 /* for usb host and peripheral controller drivers */
 #ifdef CONFIG_USB_OTG_UTILS
-extern struct usb_phy *usb_get_transceiver(void);
-extern void usb_put_transceiver(struct usb_phy *);
+extern struct usb_phy *usb_get_phy(enum usb_phy_type type);
+extern struct usb_phy *devm_usb_get_phy(struct device *dev,
+	enum usb_phy_type type);
+extern void usb_put_phy(struct usb_phy *);
+extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x);
 extern const char *otg_state_string(enum usb_otg_state state);
 #else
-static inline struct usb_phy *usb_get_transceiver(void)
+static inline struct usb_phy *usb_get_phy(enum usb_phy_type type)
+{
+	return NULL;
+}
+
+static inline struct usb_phy *devm_usb_get_phy(struct device *dev,
+	enum usb_phy_type type)
 {
 	return NULL;
 }
 
-static inline void usb_put_transceiver(struct usb_phy *x)
+static inline void usb_put_phy(struct usb_phy *x)
+{
+}
+
+static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x)
 {
 }
 
@@ -252,6 +280,24 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend)
 }
 
 static inline int
+usb_phy_notify_connect(struct usb_phy *x, int port)
+{
+	if (x->notify_connect)
+		return x->notify_connect(x, port);
+	else
+		return 0;
+}
+
+static inline int
+usb_phy_notify_disconnect(struct usb_phy *x, int port)
+{
+	if (x->notify_disconnect)
+		return x->notify_disconnect(x, port);
+	else
+		return 0;
+}
+
+static inline int
 otg_start_srp(struct usb_otg *otg)
 {
 	if (otg && otg->start_srp)
@@ -276,4 +322,15 @@ usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb)
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
 
+static inline const char *usb_phy_type_string(enum usb_phy_type type)
+{
+	switch (type) {
+	case USB_PHY_TYPE_USB2:
+		return "USB2 PHY";
+	case USB_PHY_TYPE_USB3:
+		return "USB3 PHY";
+	default:
+		return "UNKNOWN PHY TYPE";
+	}
+}
 #endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index 547e59cc00ea..c5d36c65c33b 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -132,6 +132,14 @@ struct renesas_usbhs_driver_param {
 	 * option:
 	 *
 	 * dma id for dmaengine
+	 * The data transfer direction on D0FIFO/D1FIFO should be
+	 * fixed for keeping consistency.
+	 * So, the platform id settings will be..
+	 *	.d0_tx_id = xx_TX,
+	 *	.d1_rx_id = xx_RX,
+	 * or
+	 *	.d1_tx_id = xx_TX,
+	 *	.d0_rx_id = xx_RX,
 	 */
 	int d0_tx_id;
 	int d0_rx_id;
diff --git a/include/linux/usb/uas.h b/include/linux/usb/uas.h
index 9a988e413694..5499ab5c94bd 100644
--- a/include/linux/usb/uas.h
+++ b/include/linux/usb/uas.h
@@ -20,6 +20,28 @@ enum {
 	IU_ID_WRITE_READY	= 0x07,
 };
 
+enum {
+	TMF_ABORT_TASK          = 0x01,
+	TMF_ABORT_TASK_SET      = 0x02,
+	TMF_CLEAR_TASK_SET      = 0x04,
+	TMF_LOGICAL_UNIT_RESET  = 0x08,
+	TMF_I_T_NEXUS_RESET     = 0x10,
+	TMF_CLEAR_ACA           = 0x40,
+	TMF_QUERY_TASK          = 0x80,
+	TMF_QUERY_TASK_SET      = 0x81,
+	TMF_QUERY_ASYNC_EVENT   = 0x82,
+};
+
+enum {
+	RC_TMF_COMPLETE         = 0x00,
+	RC_INVALID_INFO_UNIT    = 0x02,
+	RC_TMF_NOT_SUPPORTED    = 0x04,
+	RC_TMF_FAILED           = 0x05,
+	RC_TMF_SUCCEEDED        = 0x08,
+	RC_INCORRECT_LUN        = 0x09,
+	RC_OVERLAPPED_TAG       = 0x0a,
+};
+
 struct command_iu {
 	__u8 iu_id;
 	__u8 rsvd1;
@@ -32,6 +54,16 @@ struct command_iu {
 	__u8 cdb[16];	/* XXX: Overflow-checking tools may misunderstand */
 };
 
+struct task_mgmt_iu {
+	__u8 iu_id;
+	__u8 rsvd1;
+	__be16 tag;
+	__u8 function;
+	__u8 rsvd2;
+	__be16 task_tag;
+	struct scsi_lun lun;
+};
+
 /*
  * Also used for the Read Ready and Write Ready IUs since they have the
  * same first four bytes
@@ -47,6 +79,14 @@ struct sense_iu {
 	__u8 sense[SCSI_SENSE_BUFFERSIZE];
 };
 
+struct response_ui {
+	__u8 iu_id;
+	__u8 rsvd1;
+	__be16 tag;
+	__be16 add_response_info;
+	__u8 response_code;
+};
+
 struct usb_pipe_usage_descriptor {
 	__u8  bLength;
 	__u8  bDescriptorType;