Merge tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - DVB budget legacy API was finally documented. It took only 20+ years
   to get some documentation about it...

 - hantro driver has gained support for STM32MP25 VDEC/VENC

 - rkisp1 has gained support for i.MX8MP

 - atomisp got rid of two items from its todo list. Still 5 items
   pending for moving it out of staging

 - lots of driver fixes, cleanups and improvements

* tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (252 commits)
  media: rcar-isp: Disallow unbind of devices
  media: usbtv: Remove useless locks in usbtv_video_free()
  media: mediatek: vcodec: avoid -Wcast-function-type-strict warning
  media: ttpci: fix two memleaks in budget_av_attach
  media: go7007: fix a memleak in go7007_load_encoder
  media: dvb-frontends: avoid stack overflow warnings with clang
  media: pvrusb2: fix uaf in pvr2_context_set_notify
  media: usb: s2255: Refactor s2255_get_fx2fw
  media: ti: j721e-csi2rx: Convert to platform remove callback returning void
  media: stm32-dcmipp: Convert to platform remove callback returning void
  media: nxp: imx8-isi: Convert to platform remove callback returning void
  media: nuvoton: Convert to platform remove callback returning void
  media: chips-media: wave5: Convert to platform remove callback returning void
  media: chips-media: wave5: Remove unnecessary semicolons
  media: i2c: imx290: Fix IMX920 typo
  media: platform: replace of_graph_get_next_endpoint()
  media: i2c: replace of_graph_get_next_endpoint()
  media: ivsc: csi: Make use of sub-device state
  media: ivsc: csi: Swap SINK and SOURCE pads
  media: ipu-bridge: Serialise calls to IPU bridge init
  ...

4 files changed, 40 insertions, 15 deletions

diff --git a/include/media/cec.h b/include/media/cec.h
index d77982685116..10c9cf6058b7 100644
--- a/include/media/cec.h
+++ b/include/media/cec.h
@@ -224,8 +224,6 @@ struct cec_adap_ops {
  * @notifier:		CEC notifier
  * @pin:		CEC pin status struct
  * @cec_dir:		debugfs cec directory
- * @status_file:	debugfs cec status file
- * @error_inj_file:	debugfs cec error injection file
  * @sequence:		transmit sequence counter
  * @input_phys:		remote control input_phys name
  *
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index 2b6cd343ee9e..0393b23129eb 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -225,6 +225,7 @@ enum media_pad_signal_type {
  * @graph_obj:	Embedded structure containing the media object common data
  * @entity:	Entity this pad belongs to
  * @index:	Pad index in the entity pads array, numbered from 0 to n
+ * @num_links:	Number of links connected to this pad
  * @sig_type:	Type of the signal inside a media pad
  * @flags:	Pad flags, as defined in
  *		:ref:`include/uapi/linux/media.h <media_header>`
@@ -236,6 +237,7 @@ struct media_pad {
 	struct media_gobj graph_obj;	/* must be first field in struct */
 	struct media_entity *entity;
 	u16 index;
+	u16 num_links;
 	enum media_pad_signal_type sig_type;
 	unsigned long flags;
 
@@ -337,10 +339,6 @@ enum media_entity_type {
  * @info.dev:	Contains device major and minor info.
  * @info.dev.major: device node major, if the device is a devnode.
  * @info.dev.minor: device node minor, if the device is a devnode.
- * @major:	Devnode major number (zero if not applicable). Kept just
- *		for backward compatibility.
- * @minor:	Devnode minor number (zero if not applicable). Kept just
- *		for backward compatibility.
  *
  * .. note::
  *
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 739b0f0fc1a0..63ad36f04f72 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -536,9 +536,10 @@ int v4l2_fill_pixfmt_mp(struct v4l2_pix_format_mplane *pixfmt, u32 pixelformat,
  * V4L2_CID_LINK_FREQ control implemented by the transmitter, or value
  * calculated based on the V4L2_CID_PIXEL_RATE implemented by the transmitter.
  *
- * Returns link frequency on success, otherwise a negative error code:
- *	-ENOENT: Link frequency or pixel rate control not found
- *	-EINVAL: Invalid link frequency value
+ * Return:
+ * * >0: Link frequency
+ * * %-ENOENT: Link frequency or pixel rate control not found
+ * * %-EINVAL: Invalid link frequency value
  */
 s64 v4l2_get_link_freq(struct v4l2_ctrl_handler *handler, unsigned int mul,
 		       unsigned int div);
@@ -547,6 +548,31 @@ void v4l2_simplify_fraction(u32 *numerator, u32 *denominator,
 		unsigned int n_terms, unsigned int threshold);
 u32 v4l2_fraction_to_interval(u32 numerator, u32 denominator);
 
+/**
+ * v4l2_link_freq_to_bitmap - Figure out platform-supported link frequencies
+ * @dev: The struct device
+ * @fw_link_freqs: Array of link frequencies from firmware
+ * @num_of_fw_link_freqs: Number of entries in @fw_link_freqs
+ * @driver_link_freqs: Array of link frequencies supported by the driver
+ * @num_of_driver_link_freqs: Number of entries in @driver_link_freqs
+ * @bitmap: Bitmap of driver-supported link frequencies found in @fw_link_freqs
+ *
+ * This function checks which driver-supported link frequencies are enabled in
+ * system firmware and sets the corresponding bits in @bitmap (after first
+ * zeroing it).
+ *
+ * Return:
+ * * %0: Success
+ * * %-ENOENT: No match found between driver-supported link frequencies and
+ *   those available in firmware.
+ * * %-ENODATA: No link frequencies were specified in firmware.
+ */
+int v4l2_link_freq_to_bitmap(struct device *dev, const u64 *fw_link_freqs,
+			     unsigned int num_of_fw_link_freqs,
+			     const s64 *driver_link_freqs,
+			     unsigned int num_of_driver_link_freqs,
+			     unsigned long *bitmap);
+
 static inline u64 v4l2_buffer_get_timestamp(const struct v4l2_buffer *buf)
 {
 	/*
diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
index 56719a26a46c..8b86996b2719 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -72,6 +72,10 @@ struct vb2_buffer;
  *		 argument to other ops in this structure.
  * @put_userptr: inform the allocator that a USERPTR buffer will no longer
  *		 be used.
+ * @prepare:	called every time the buffer is passed from userspace to the
+ *		driver, useful for cache synchronisation, optional.
+ * @finish:	called every time the buffer is passed back from the driver
+ *		to the userspace, also optional.
  * @attach_dmabuf: attach a shared &struct dma_buf for a hardware operation;
  *		   used for DMABUF memory types; dev is the alloc device
  *		   dbuf is the shared dma_buf; returns ERR_PTR() on failure;
@@ -86,10 +90,6 @@ struct vb2_buffer;
  *		dmabuf.
  * @unmap_dmabuf: releases access control to the dmabuf - allocator is notified
  *		  that this driver is done using the dmabuf for now.
- * @prepare:	called every time the buffer is passed from userspace to the
- *		driver, useful for cache synchronisation, optional.
- * @finish:	called every time the buffer is passed back from the driver
- *		to the userspace, also optional.
  * @vaddr:	return a kernel virtual address to a given memory buffer
  *		associated with the passed private structure or NULL if no
  *		such mapping exists.
@@ -271,11 +271,11 @@ struct vb2_buffer {
 	 *			skips cache sync/invalidation.
 	 * skip_cache_sync_on_finish: when set buffer's ->finish() function
 	 *			skips cache sync/invalidation.
+	 * planes:		per-plane information; do not change
 	 * queued_entry:	entry on the queued buffers list, which holds
 	 *			all buffers queued from userspace
 	 * done_entry:		entry on the list that stores all buffers ready
 	 *			to be dequeued to userspace
-	 * vb2_plane:		per-plane information; do not change
 	 */
 	enum vb2_buffer_state	state;
 	unsigned int		synced:1;
@@ -484,7 +484,6 @@ struct vb2_buf_ops {
  *		caller. For example, for V4L2, it should match
  *		the types defined on &enum v4l2_buf_type.
  * @io_modes:	supported io methods (see &enum vb2_io_modes).
- * @alloc_devs:	&struct device memory type/allocator-specific per-plane device
  * @dev:	device to use for the default allocation context if the driver
  *		doesn't fill in the @alloc_devs array.
  * @dma_attrs:	DMA attributes to use for the DMA.
@@ -553,6 +552,7 @@ struct vb2_buf_ops {
  *		VIDIOC_REQBUFS will ensure at least @min_queued_buffers
  *		buffers will be allocated. Note that VIDIOC_CREATE_BUFS will not
  *		modify the requested buffer count.
+ * @alloc_devs:	&struct device memory type/allocator-specific per-plane device
  */
 /*
  * Private elements (won't appear at the uAPI book):
@@ -577,6 +577,9 @@ struct vb2_buf_ops {
  * @waiting_for_buffers: used in poll() to check if vb2 is still waiting for
  *		buffers. Only set for capture queues if qbuf has not yet been
  *		called since poll() needs to return %EPOLLERR in that situation.
+ * @waiting_in_dqbuf: set by the core for the duration of a blocking DQBUF, when
+ *		it has to wait for a buffer to become available with vb2_queue->lock
+ *		released. Used to prevent destroying the queue by other threads.
  * @is_multiplanar: set if buffer type is multiplanar
  * @is_output:	set if buffer type is output
  * @copy_timestamp: set if vb2-core should set timestamps