summaryrefslogtreecommitdiff
path: root/include/net/mac80211.h
diff options
context:
space:
mode:
authorJohannes Berg <johannes@sipsolutions.net>2008-07-09 16:40:37 +0400
committerJohn W. Linville <linville@tuxdriver.com>2008-07-14 22:30:07 +0400
commit9d139c810a2aa17365cc548d0cd2a189d8433c65 (patch)
treeef10ca55f93689ab97368376d277102d2527c961 /include/net/mac80211.h
parentf3947e2dfa3b18f375b7acd03b7ee2877d0751fc (diff)
downloadlinux-9d139c810a2aa17365cc548d0cd2a189d8433c65.tar.xz
mac80211: revamp beacon configuration
This patch changes mac80211's beacon configuration handling to never pass skbs to the driver directly but rather always require the driver to use ieee80211_beacon_get(). Additionally, it introduces "change flags" on the config_interface() call to enable drivers to figure out what is changing. Finally, it removes the beacon_update() driver callback in favour of having IBSS beacon delivered by ieee80211_beacon_get() as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r--include/net/mac80211.h49
1 files changed, 16 insertions, 33 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 9672a04c4f7b..47c072eab42c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -529,33 +529,38 @@ struct ieee80211_if_init_conf {
};
/**
+ * enum ieee80211_if_conf_change - interface config change flags
+ *
+ * @IEEE80211_IFCC_BSSID: The BSSID changed.
+ * @IEEE80211_IFCC_SSID: The SSID changed.
+ * @IEEE80211_IFCC_BEACON: The beacon for this interface changed
+ * (currently AP and MESH only), use ieee80211_beacon_get().
+ */
+enum ieee80211_if_conf_change {
+ IEEE80211_IFCC_BSSID = BIT(0),
+ IEEE80211_IFCC_SSID = BIT(1),
+ IEEE80211_IFCC_BEACON = BIT(2),
+};
+
+/**
* struct ieee80211_if_conf - configuration of an interface
*
- * @type: type of the interface. This is always the same as was specified in
- * &struct ieee80211_if_init_conf. The type of an interface never changes
- * during the life of the interface; this field is present only for
- * convenience.
+ * @changed: parameters that have changed, see &enum ieee80211_if_conf_change.
* @bssid: BSSID of the network we are associated to/creating.
* @ssid: used (together with @ssid_len) by drivers for hardware that
* generate beacons independently. The pointer is valid only during the
* config_interface() call, so copy the value somewhere if you need
* it.
* @ssid_len: length of the @ssid field.
- * @beacon: beacon template. Valid only if @host_gen_beacon_template in
- * &struct ieee80211_hw is set. The driver is responsible of freeing
- * the sk_buff.
- * @beacon_control: tx_control for the beacon template, this field is only
- * valid when the @beacon field was set.
*
* This structure is passed to the config_interface() callback of
* &struct ieee80211_hw.
*/
struct ieee80211_if_conf {
- int type;
+ u32 changed;
u8 *bssid;
u8 *ssid;
size_t ssid_len;
- struct sk_buff *beacon;
};
/**
@@ -683,15 +688,6 @@ enum ieee80211_tkip_key_type {
* any particular flags. There are some exceptions to this rule,
* however, so you are advised to review these flags carefully.
*
- * @IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE:
- * The device only needs to be supplied with a beacon template.
- * If you need the host to generate each beacon then don't use
- * this flag and call ieee80211_beacon_get() when you need the
- * next beacon frame. Note that if you set this flag, you must
- * implement the set_tim() callback for powersave mode to work
- * properly.
- * This flag is only relevant for access-point mode.
- *
* @IEEE80211_HW_RX_INCLUDES_FCS:
* Indicates that received frames passed to the stack include
* the FCS at the end.
@@ -1151,17 +1147,6 @@ enum ieee80211_ampdu_mlme_action {
* function is optional if the firmware/hardware takes full care of
* TSF synchronization.
*
- * @beacon_update: Setup beacon data for IBSS beacons. Unlike access point,
- * IBSS uses a fixed beacon frame which is configured using this
- * function.
- * If the driver returns success (0) from this callback, it owns
- * the skb. That means the driver is responsible to kfree_skb() it.
- * The control structure is not dynamically allocated. That means the
- * driver does not own the pointer and if it needs it somewhere
- * outside of the context of this function, it must copy it
- * somewhere else.
- * This handler is required only for IBSS mode.
- *
* @tx_last_beacon: Determine whether the last IBSS beacon was sent by us.
* This is needed only for IBSS mode and the result of this function is
* used to determine whether to reply to Probe Requests.
@@ -1219,8 +1204,6 @@ struct ieee80211_ops {
struct ieee80211_tx_queue_stats *stats);
u64 (*get_tsf)(struct ieee80211_hw *hw);
void (*reset_tsf)(struct ieee80211_hw *hw);
- int (*beacon_update)(struct ieee80211_hw *hw,
- struct sk_buff *skb);
int (*tx_last_beacon)(struct ieee80211_hw *hw);
int (*ampdu_action)(struct ieee80211_hw *hw,
enum ieee80211_ampdu_mlme_action action,