summaryrefslogtreecommitdiff
path: root/include/uapi
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-05-08 08:03:58 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2019-05-08 08:03:58 +0300
commit80f232121b69cc69a31ccb2b38c1665d770b0710 (patch)
tree106263eac4ff03b899df695e00dd11e593e74fe2 /include/uapi
parent82efe439599439a5e1e225ce5740e6cfb777a7dd (diff)
parenta9e41a529681b38087c91ebc0bb91e12f510ca2d (diff)
downloadlinux-80f232121b69cc69a31ccb2b38c1665d770b0710.tar.xz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
Diffstat (limited to 'include/uapi')
-rw-r--r--include/uapi/asm-generic/sockios.h4
-rw-r--r--include/uapi/linux/batadv_packet.h12
-rw-r--r--include/uapi/linux/batman_adv.h25
-rw-r--r--include/uapi/linux/bpf.h291
-rw-r--r--include/uapi/linux/btf.h32
-rw-r--r--include/uapi/linux/ethtool.h11
-rw-r--r--include/uapi/linux/fou.h6
-rw-r--r--include/uapi/linux/icmpv6.h4
-rw-r--r--include/uapi/linux/if_ether.h1
-rw-r--r--include/uapi/linux/if_tun.h1
-rw-r--r--include/uapi/linux/if_vlan.h9
-rw-r--r--include/uapi/linux/ip_vs.h11
-rw-r--r--include/uapi/linux/netfilter/nf_tables.h8
-rw-r--r--include/uapi/linux/nl80211.h86
-rw-r--r--include/uapi/linux/openvswitch.h46
-rw-r--r--include/uapi/linux/pkt_sched.h13
-rw-r--r--include/uapi/linux/sockios.h21
-rw-r--r--include/uapi/linux/tcp.h27
-rw-r--r--include/uapi/linux/tipc.h1
-rw-r--r--include/uapi/linux/tipc_netlink.h2
-rw-r--r--include/uapi/linux/tls.h15
21 files changed, 577 insertions, 49 deletions
diff --git a/include/uapi/asm-generic/sockios.h b/include/uapi/asm-generic/sockios.h
index 64f658c7cec2..44fa3ed70483 100644
--- a/include/uapi/asm-generic/sockios.h
+++ b/include/uapi/asm-generic/sockios.h
@@ -8,7 +8,7 @@
#define FIOGETOWN 0x8903
#define SIOCGPGRP 0x8904
#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+#define SIOCGSTAMP_OLD 0x8906 /* Get stamp (timeval) */
+#define SIOCGSTAMPNS_OLD 0x8907 /* Get stamp (timespec) */
#endif /* __ASM_GENERIC_SOCKIOS_H */
diff --git a/include/uapi/linux/batadv_packet.h b/include/uapi/linux/batadv_packet.h
index c99336f4eefe..4ebc2135e950 100644
--- a/include/uapi/linux/batadv_packet.h
+++ b/include/uapi/linux/batadv_packet.h
@@ -2,18 +2,6 @@
/* Copyright (C) 2007-2019 B.A.T.M.A.N. contributors:
*
* Marek Lindner, Simon Wunderlich
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of version 2 of the GNU General Public
- * License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _UAPI_LINUX_BATADV_PACKET_H_
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 305bf316dd03..67f4636758af 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -2,24 +2,6 @@
/* Copyright (C) 2016-2019 B.A.T.M.A.N. contributors:
*
* Matthias Schiffer
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
*/
#ifndef _UAPI_LINUX_BATMAN_ADV_H_
@@ -491,6 +473,13 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_THROUGHPUT_OVERRIDE,
+ /**
+ * @BATADV_ATTR_MULTICAST_FANOUT: defines the maximum number of packet
+ * copies that may be generated for a multicast-to-unicast conversion.
+ * Once this limit is exceeded distribution will fall back to broadcast.
+ */
+ BATADV_ATTR_MULTICAST_FANOUT,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 929c8e537a14..72336bac7573 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -105,6 +105,7 @@ enum bpf_cmd {
BPF_BTF_GET_FD_BY_ID,
BPF_TASK_FD_QUERY,
BPF_MAP_LOOKUP_AND_DELETE_ELEM,
+ BPF_MAP_FREEZE,
};
enum bpf_map_type {
@@ -132,6 +133,7 @@ enum bpf_map_type {
BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE,
BPF_MAP_TYPE_QUEUE,
BPF_MAP_TYPE_STACK,
+ BPF_MAP_TYPE_SK_STORAGE,
};
/* Note that tracing related programs such as
@@ -166,6 +168,8 @@ enum bpf_prog_type {
BPF_PROG_TYPE_LIRC_MODE2,
BPF_PROG_TYPE_SK_REUSEPORT,
BPF_PROG_TYPE_FLOW_DISSECTOR,
+ BPF_PROG_TYPE_CGROUP_SYSCTL,
+ BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE,
};
enum bpf_attach_type {
@@ -187,6 +191,7 @@ enum bpf_attach_type {
BPF_CGROUP_UDP6_SENDMSG,
BPF_LIRC_MODE2,
BPF_FLOW_DISSECTOR,
+ BPF_CGROUP_SYSCTL,
__MAX_BPF_ATTACH_TYPE
};
@@ -255,8 +260,19 @@ enum bpf_attach_type {
*/
#define BPF_F_ANY_ALIGNMENT (1U << 1)
-/* when bpf_ldimm64->src_reg == BPF_PSEUDO_MAP_FD, bpf_ldimm64->imm == fd */
+/* When BPF ldimm64's insn[0].src_reg != 0 then this can have
+ * two extensions:
+ *
+ * insn[0].src_reg: BPF_PSEUDO_MAP_FD BPF_PSEUDO_MAP_VALUE
+ * insn[0].imm: map fd map fd
+ * insn[1].imm: 0 offset into value
+ * insn[0].off: 0 0
+ * insn[1].off: 0 0
+ * ldimm64 rewrite: address of map address of map[0]+offset
+ * verifier type: CONST_PTR_TO_MAP PTR_TO_MAP_VALUE
+ */
#define BPF_PSEUDO_MAP_FD 1
+#define BPF_PSEUDO_MAP_VALUE 2
/* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative
* offset to another bpf function
@@ -283,7 +299,7 @@ enum bpf_attach_type {
#define BPF_OBJ_NAME_LEN 16U
-/* Flags for accessing BPF object */
+/* Flags for accessing BPF object from syscall side. */
#define BPF_F_RDONLY (1U << 3)
#define BPF_F_WRONLY (1U << 4)
@@ -293,6 +309,10 @@ enum bpf_attach_type {
/* Zero-initialize hash function seed. This should only be used for testing. */
#define BPF_F_ZERO_SEED (1U << 6)
+/* Flags for accessing BPF object from program side. */
+#define BPF_F_RDONLY_PROG (1U << 7)
+#define BPF_F_WRONLY_PROG (1U << 8)
+
/* flags for BPF_PROG_QUERY */
#define BPF_F_QUERY_EFFECTIVE (1U << 0)
@@ -396,6 +416,13 @@ union bpf_attr {
__aligned_u64 data_out;
__u32 repeat;
__u32 duration;
+ __u32 ctx_size_in; /* input: len of ctx_in */
+ __u32 ctx_size_out; /* input/output: len of ctx_out
+ * returns ENOSPC if ctx_out
+ * is too small.
+ */
+ __aligned_u64 ctx_in;
+ __aligned_u64 ctx_out;
} test;
struct { /* anonymous struct used by BPF_*_GET_*_ID */
@@ -1478,13 +1505,31 @@ union bpf_attr {
* Grow or shrink the room for data in the packet associated to
* *skb* by *len_diff*, and according to the selected *mode*.
*
- * There is a single supported mode at this time:
+ * There are two supported modes at this time:
+ *
+ * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer
+ * (room space is added or removed below the layer 2 header).
*
* * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer
* (room space is added or removed below the layer 3 header).
*
- * All values for *flags* are reserved for future usage, and must
- * be left at zero.
+ * The following flags are supported at this time:
+ *
+ * * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size.
+ * Adjusting mss in this way is not allowed for datagrams.
+ *
+ * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 **:
+ * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 **:
+ * Any new space is reserved to hold a tunnel header.
+ * Configure skb offsets and other fields accordingly.
+ *
+ * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE **:
+ * * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP **:
+ * Use with ENCAP_L3 flags to further specify the tunnel type.
+ *
+ * * **BPF_F_ADJ_ROOM_ENCAP_L2(len) **:
+ * Use with ENCAP_L3/L4 flags to further specify the tunnel
+ * type; **len** is the length of the inner MAC header.
*
* A call to this helper is susceptible to change the underlaying
* packet buffer. Therefore, at load time, all checks on pointers
@@ -1694,12 +1739,19 @@ union bpf_attr {
* error if an eBPF program tries to set a callback that is not
* supported in the current kernel.
*
- * The supported callback values that *argval* can combine are:
+ * *argval* is a flag array which can combine these flags:
*
* * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out)
* * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission)
* * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change)
*
+ * Therefore, this function can be used to clear a callback flag by
+ * setting the appropriate bit to zero. e.g. to disable the RTO
+ * callback:
+ *
+ * **bpf_sock_ops_cb_flags_set(bpf_sock,**
+ * **bpf_sock->bpf_sock_ops_cb_flags & ~BPF_SOCK_OPS_RTO_CB_FLAG)**
+ *
* Here are some examples of where one could call such eBPF
* program:
*
@@ -2431,6 +2483,190 @@ union bpf_attr {
* Return
* A **struct bpf_sock** pointer on success, or **NULL** in
* case of failure.
+ *
+ * struct bpf_sock *bpf_skc_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags)
+ * Description
+ * Look for TCP socket matching *tuple*, optionally in a child
+ * network namespace *netns*. The return value must be checked,
+ * and if non-**NULL**, released via **bpf_sk_release**\ ().
+ *
+ * This function is identical to bpf_sk_lookup_tcp, except that it
+ * also returns timewait or request sockets. Use bpf_sk_fullsock
+ * or bpf_tcp_socket to access the full structure.
+ *
+ * This helper is available only if the kernel was compiled with
+ * **CONFIG_NET** configuration option.
+ * Return
+ * Pointer to **struct bpf_sock**, or **NULL** in case of failure.
+ * For sockets with reuseport option, the **struct bpf_sock**
+ * result is from **reuse->socks**\ [] using the hash of the tuple.
+ *
+ * int bpf_tcp_check_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len)
+ * Description
+ * Check whether iph and th contain a valid SYN cookie ACK for
+ * the listening socket in sk.
+ *
+ * iph points to the start of the IPv4 or IPv6 header, while
+ * iph_len contains sizeof(struct iphdr) or sizeof(struct ip6hdr).
+ *
+ * th points to the start of the TCP header, while th_len contains
+ * sizeof(struct tcphdr).
+ *
+ * Return
+ * 0 if iph and th are a valid SYN cookie ACK, or a negative error
+ * otherwise.
+ *
+ * int bpf_sysctl_get_name(struct bpf_sysctl *ctx, char *buf, size_t buf_len, u64 flags)
+ * Description
+ * Get name of sysctl in /proc/sys/ and copy it into provided by
+ * program buffer *buf* of size *buf_len*.
+ *
+ * The buffer is always NUL terminated, unless it's zero-sized.
+ *
+ * If *flags* is zero, full name (e.g. "net/ipv4/tcp_mem") is
+ * copied. Use **BPF_F_SYSCTL_BASE_NAME** flag to copy base name
+ * only (e.g. "tcp_mem").
+ * Return
+ * Number of character copied (not including the trailing NUL).
+ *
+ * **-E2BIG** if the buffer wasn't big enough (*buf* will contain
+ * truncated name in this case).
+ *
+ * int bpf_sysctl_get_current_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len)
+ * Description
+ * Get current value of sysctl as it is presented in /proc/sys
+ * (incl. newline, etc), and copy it as a string into provided
+ * by program buffer *buf* of size *buf_len*.
+ *
+ * The whole value is copied, no matter what file position user
+ * space issued e.g. sys_read at.
+ *
+ * The buffer is always NUL terminated, unless it's zero-sized.
+ * Return
+ * Number of character copied (not including the trailing NUL).
+ *
+ * **-E2BIG** if the buffer wasn't big enough (*buf* will contain
+ * truncated name in this case).
+ *
+ * **-EINVAL** if current value was unavailable, e.g. because
+ * sysctl is uninitialized and read returns -EIO for it.
+ *
+ * int bpf_sysctl_get_new_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len)
+ * Description
+ * Get new value being written by user space to sysctl (before
+ * the actual write happens) and copy it as a string into
+ * provided by program buffer *buf* of size *buf_len*.
+ *
+ * User space may write new value at file position > 0.
+ *
+ * The buffer is always NUL terminated, unless it's zero-sized.
+ * Return
+ * Number of character copied (not including the trailing NUL).
+ *
+ * **-E2BIG** if the buffer wasn't big enough (*buf* will contain
+ * truncated name in this case).
+ *
+ * **-EINVAL** if sysctl is being read.
+ *
+ * int bpf_sysctl_set_new_value(struct bpf_sysctl *ctx, const char *buf, size_t buf_len)
+ * Description
+ * Override new value being written by user space to sysctl with
+ * value provided by program in buffer *buf* of size *buf_len*.
+ *
+ * *buf* should contain a string in same form as provided by user
+ * space on sysctl write.
+ *
+ * User space may write new value at file position > 0. To override
+ * the whole sysctl value file position should be set to zero.
+ * Return
+ * 0 on success.
+ *
+ * **-E2BIG** if the *buf_len* is too big.
+ *
+ * **-EINVAL** if sysctl is being read.
+ *
+ * int bpf_strtol(const char *buf, size_t buf_len, u64 flags, long *res)
+ * Description
+ * Convert the initial part of the string from buffer *buf* of
+ * size *buf_len* to a long integer according to the given base
+ * and save the result in *res*.
+ *
+ * The string may begin with an arbitrary amount of white space
+ * (as determined by isspace(3)) followed by a single optional '-'
+ * sign.
+ *
+ * Five least significant bits of *flags* encode base, other bits
+ * are currently unused.
+ *
+ * Base must be either 8, 10, 16 or 0 to detect it automatically
+ * similar to user space strtol(3).
+ * Return
+ * Number of characters consumed on success. Must be positive but
+ * no more than buf_len.
+ *
+ * **-EINVAL** if no valid digits were found or unsupported base
+ * was provided.
+ *
+ * **-ERANGE** if resulting value was out of range.
+ *
+ * int bpf_strtoul(const char *buf, size_t buf_len, u64 flags, unsigned long *res)
+ * Description
+ * Convert the initial part of the string from buffer *buf* of
+ * size *buf_len* to an unsigned long integer according to the
+ * given base and save the result in *res*.
+ *
+ * The string may begin with an arbitrary amount of white space
+ * (as determined by isspace(3)).
+ *
+ * Five least significant bits of *flags* encode base, other bits
+ * are currently unused.
+ *
+ * Base must be either 8, 10, 16 or 0 to detect it automatically
+ * similar to user space strtoul(3).
+ * Return
+ * Number of characters consumed on success. Must be positive but
+ * no more than buf_len.
+ *
+ * **-EINVAL** if no valid digits were found or unsupported base
+ * was provided.
+ *
+ * **-ERANGE** if resulting value was out of range.
+ *
+ * void *bpf_sk_storage_get(struct bpf_map *map, struct bpf_sock *sk, void *value, u64 flags)
+ * Description
+ * Get a bpf-local-storage from a sk.
+ *
+ * Logically, it could be thought of getting the value from
+ * a *map* with *sk* as the **key**. From this
+ * perspective, the usage is not much different from
+ * **bpf_map_lookup_elem(map, &sk)** except this
+ * helper enforces the key must be a **bpf_fullsock()**
+ * and the map must be a BPF_MAP_TYPE_SK_STORAGE also.
+ *
+ * Underneath, the value is stored locally at *sk* instead of
+ * the map. The *map* is used as the bpf-local-storage **type**.
+ * The bpf-local-storage **type** (i.e. the *map*) is searched
+ * against all bpf-local-storages residing at sk.
+ *
+ * An optional *flags* (BPF_SK_STORAGE_GET_F_CREATE) can be
+ * used such that a new bpf-local-storage will be
+ * created if one does not exist. *value* can be used
+ * together with BPF_SK_STORAGE_GET_F_CREATE to specify
+ * the initial value of a bpf-local-storage. If *value* is
+ * NULL, the new bpf-local-storage will be zero initialized.
+ * Return
+ * A bpf-local-storage pointer is returned on success.
+ *
+ * **NULL** if not found or there was an error in adding
+ * a new bpf-local-storage.
+ *
+ * int bpf_sk_storage_delete(struct bpf_map *map, struct bpf_sock *sk)
+ * Description
+ * Delete a bpf-local-storage from a sk.
+ * Return
+ * 0 on success.
+ *
+ * **-ENOENT** if the bpf-local-storage cannot be found.
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
@@ -2531,7 +2767,17 @@ union bpf_attr {
FN(sk_fullsock), \
FN(tcp_sock), \
FN(skb_ecn_set_ce), \
- FN(get_listener_sock),
+ FN(get_listener_sock), \
+ FN(skc_lookup_tcp), \
+ FN(tcp_check_syncookie), \
+ FN(sysctl_get_name), \
+ FN(sysctl_get_current_value), \
+ FN(sysctl_get_new_value), \
+ FN(sysctl_set_new_value), \
+ FN(strtol), \
+ FN(strtoul), \
+ FN(sk_storage_get), \
+ FN(sk_storage_delete),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call
@@ -2590,9 +2836,30 @@ enum bpf_func_id {
/* Current network namespace */
#define BPF_F_CURRENT_NETNS (-1L)
+/* BPF_FUNC_skb_adjust_room flags. */
+#define BPF_F_ADJ_ROOM_FIXED_GSO (1ULL << 0)
+
+#define BPF_ADJ_ROOM_ENCAP_L2_MASK 0xff
+#define BPF_ADJ_ROOM_ENCAP_L2_SHIFT 56
+
+#define BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 (1ULL << 1)
+#define BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 (1ULL << 2)
+#define BPF_F_ADJ_ROOM_ENCAP_L4_GRE (1ULL << 3)
+#define BPF_F_ADJ_ROOM_ENCAP_L4_UDP (1ULL << 4)
+#define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \
+ BPF_ADJ_ROOM_ENCAP_L2_MASK) \
+ << BPF_ADJ_ROOM_ENCAP_L2_SHIFT)
+
+/* BPF_FUNC_sysctl_get_name flags. */
+#define BPF_F_SYSCTL_BASE_NAME (1ULL << 0)
+
+/* BPF_FUNC_sk_storage_get flags */
+#define BPF_SK_STORAGE_GET_F_CREATE (1ULL << 0)
+
/* Mode for BPF_FUNC_skb_adjust_room helper. */
enum bpf_adj_room_mode {
BPF_ADJ_ROOM_NET,
+ BPF_ADJ_ROOM_MAC,
};
/* Mode for BPF_FUNC_skb_load_bytes_relative helper. */
@@ -3218,4 +3485,14 @@ struct bpf_line_info {
struct bpf_spin_lock {
__u32 val;
};
+
+struct bpf_sysctl {
+ __u32 write; /* Sysctl is being read (= 0) or written (= 1).
+ * Allows 1,2,4-byte read, but no write.
+ */
+ __u32 file_pos; /* Sysctl file position to read from, write to.
+ * Allows 1,2,4-byte read an 4-byte write.
+ */
+};
+
#endif /* _UAPI__LINUX_BPF_H__ */
diff --git a/include/uapi/linux/btf.h b/include/uapi/linux/btf.h
index 7b7475ef2f17..9310652ca4f9 100644
--- a/include/uapi/linux/btf.h
+++ b/include/uapi/linux/btf.h
@@ -39,11 +39,11 @@ struct btf_type {
* struct, union and fwd
*/
__u32 info;
- /* "size" is used by INT, ENUM, STRUCT and UNION.
+ /* "size" is used by INT, ENUM, STRUCT, UNION and DATASEC.
* "size" tells the size of the type it is describing.
*
* "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT,
- * FUNC and FUNC_PROTO.
+ * FUNC, FUNC_PROTO and VAR.
* "type" is a type_id referring to another type.
*/
union {
@@ -70,8 +70,10 @@ struct btf_type {
#define BTF_KIND_RESTRICT 11 /* Restrict */
#define BTF_KIND_FUNC 12 /* Function */
#define BTF_KIND_FUNC_PROTO 13 /* Function Proto */
-#define BTF_KIND_MAX 13
-#define NR_BTF_KINDS 14
+#define BTF_KIND_VAR 14 /* Variable */
+#define BTF_KIND_DATASEC 15 /* Section */
+#define BTF_KIND_MAX BTF_KIND_DATASEC
+#define NR_BTF_KINDS (BTF_KIND_MAX + 1)
/* For some specific BTF_KIND, "struct btf_type" is immediately
* followed by extra data.
@@ -138,4 +140,26 @@ struct btf_param {
__u32 type;
};
+enum {
+ BTF_VAR_STATIC = 0,
+ BTF_VAR_GLOBAL_ALLOCATED,
+};
+
+/* BTF_KIND_VAR is followed by a single "struct btf_var" to describe
+ * additional information related to the variable such as its linkage.
+ */
+struct btf_var {
+ __u32 linkage;
+};
+
+/* BTF_KIND_DATASEC is followed by multiple "struct btf_var_secinfo"
+ * to describe all BTF_KIND_VAR types it contains along with it's
+ * in-section offset as well as size.
+ */
+struct btf_var_secinfo {
+ __u32 type;
+ __u32 offset;
+ __u32 size;
+};
+
#endif /* _UAPI__LINUX_BTF_H__ */
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index d473e5ed044c..3534ce157ae9 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -252,9 +252,17 @@ struct ethtool_tunable {
#define DOWNSHIFT_DEV_DEFAULT_COUNT 0xff
#define DOWNSHIFT_DEV_DISABLE 0
+/* Time in msecs after which link is reported as down
+ * 0 = lowest time supported by the PHY
+ * 0xff = off, link down detection according to standard
+ */
+#define ETHTOOL_PHY_FAST_LINK_DOWN_ON 0
+#define ETHTOOL_PHY_FAST_LINK_DOWN_OFF 0xff
+
enum phy_tunable_id {
ETHTOOL_PHY_ID_UNSPEC,
ETHTOOL_PHY_DOWNSHIFT,
+ ETHTOOL_PHY_FAST_LINK_DOWN,
/*
* Add your fresh new phy tunable attribute above and remember to update
* phy_tunable_strings[] in net/core/ethtool.c
@@ -1704,6 +1712,9 @@ static inline int ethtool_validate_duplex(__u8 duplex)
#define ETH_MODULE_SFF_8436 0x4
#define ETH_MODULE_SFF_8436_LEN 256
+#define ETH_MODULE_SFF_8636_MAX_LEN 640
+#define ETH_MODULE_SFF_8436_MAX_LEN 640
+
/* Reset flags */
/* The reset() operation must clear the flags for the components which
* were actually reset. On successful return, the flags indicate the
diff --git a/include/uapi/linux/fou.h b/include/uapi/linux/fou.h
index f2ea833a2812..87c2c9f08803 100644
--- a/include/uapi/linux/fou.h
+++ b/include/uapi/linux/fou.h
@@ -16,6 +16,12 @@ enum {
FOU_ATTR_IPPROTO, /* u8 */
FOU_ATTR_TYPE, /* u8 */
FOU_ATTR_REMCSUM_NOPARTIAL, /* flag */
+ FOU_ATTR_LOCAL_V4, /* u32 */
+ FOU_ATTR_LOCAL_V6, /* in6_addr */
+ FOU_ATTR_PEER_V4, /* u32 */
+ FOU_ATTR_PEER_V6, /* in6_addr */
+ FOU_ATTR_PEER_PORT, /* u16 */
+ FOU_ATTR_IFINDEX, /* s32 */
__FOU_ATTR_MAX,
};
diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h
index 325395f56bfa..2622b5a3e616 100644
--- a/include/uapi/linux/icmpv6.h
+++ b/include/uapi/linux/icmpv6.h
@@ -90,6 +90,8 @@ struct icmp6hdr {
#define ICMPV6_TIME_EXCEED 3
#define ICMPV6_PARAMPROB 4
+#define ICMPV6_ERRMSG_MAX 127
+
#define ICMPV6_INFOMSG_MASK 0x80
#define ICMPV6_ECHO_REQUEST 128
@@ -110,6 +112,8 @@ struct icmp6hdr {
#define ICMPV6_MRDISC_ADV 151
+#define ICMPV6_MSG_MAX 255
+
/*
* Codes for Destination Unreachable
*/
diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
index 3a45b4ad71a3..3158ba672b72 100644
--- a/include/uapi/linux/if_ether.h
+++ b/include/uapi/linux/if_ether.h
@@ -109,6 +109,7 @@
#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_DSA_8021Q 0xDADB /* Fake VLAN Header for DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */
#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h
index 23a6753b37df..454ae31b93c7 100644
--- a/include/uapi/linux/if_tun.h
+++ b/include/uapi/linux/if_tun.h
@@ -60,6 +60,7 @@
#define TUNSETSTEERINGEBPF _IOR('T', 224, int)
#define TUNSETFILTEREBPF _IOR('T', 225, int)
#define TUNSETCARRIER _IOW('T', 226, int)
+#define TUNGETDEVNETNS _IO('T', 227)
/* TUNSETIFF ifr flags */
#define IFF_TUN 0x0001
diff --git a/include/uapi/linux/if_vlan.h b/include/uapi/linux/if_vlan.h
index 7a0e8bd65b6b..90a2c89afc8f 100644
--- a/include/uapi/linux/if_vlan.h
+++ b/include/uapi/linux/if_vlan.h
@@ -32,10 +32,11 @@ enum vlan_ioctl_cmds {
};
enum vlan_flags {
- VLAN_FLAG_REORDER_HDR = 0x1,
- VLAN_FLAG_GVRP = 0x2,
- VLAN_FLAG_LOOSE_BINDING = 0x4,
- VLAN_FLAG_MVRP = 0x8,
+ VLAN_FLAG_REORDER_HDR = 0x1,
+ VLAN_FLAG_GVRP = 0x2,
+ VLAN_FLAG_LOOSE_BINDING = 0x4,
+ VLAN_FLAG_MVRP = 0x8,
+ VLAN_FLAG_BRIDGE_BINDING = 0x10,
};
enum vlan_name_types {
diff --git a/include/uapi/linux/ip_vs.h b/include/uapi/linux/ip_vs.h
index 1c916b2f89dc..e34f436fc79d 100644
--- a/include/uapi/linux/ip_vs.h
+++ b/include/uapi/linux/ip_vs.h
@@ -124,6 +124,13 @@
#define IP_VS_PEDATA_MAXLEN 255
+/* Tunnel types */
+enum {
+ IP_VS_CONN_F_TUNNEL_TYPE_IPIP = 0, /* IPIP */
+ IP_VS_CONN_F_TUNNEL_TYPE_GUE, /* GUE */
+ IP_VS_CONN_F_TUNNEL_TYPE_MAX,
+};
+
/*
* The struct ip_vs_service_user and struct ip_vs_dest_user are
* used to set IPVS rules through setsockopt.
@@ -392,6 +399,10 @@ enum {
IPVS_DEST_ATTR_STATS64, /* nested attribute for dest stats */
+ IPVS_DEST_ATTR_TUN_TYPE, /* tunnel type */
+
+ IPVS_DEST_ATTR_TUN_PORT, /* tunnel port */
+
__IPVS_DEST_ATTR_MAX,
};
diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h
index a66c8de006cc..f0cf7b0f4f35 100644
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@ -967,6 +967,7 @@ enum nft_socket_keys {
* @NFT_CT_SRC_IP6: conntrack layer 3 protocol source (IPv6 address)
* @NFT_CT_DST_IP6: conntrack layer 3 protocol destination (IPv6 address)
* @NFT_CT_TIMEOUT: connection tracking timeout policy assigned to conntrack
+ * @NFT_CT_ID: conntrack id
*/
enum nft_ct_keys {
NFT_CT_STATE,
@@ -993,6 +994,7 @@ enum nft_ct_keys {
NFT_CT_SRC_IP6,
NFT_CT_DST_IP6,
NFT_CT_TIMEOUT,
+ NFT_CT_ID,
__NFT_CT_MAX
};
#define NFT_CT_MAX (__NFT_CT_MAX - 1)
@@ -1522,15 +1524,21 @@ enum nft_flowtable_hook_attributes {
*
* @NFTA_OSF_DREG: destination register (NLA_U32: nft_registers)
* @NFTA_OSF_TTL: Value of the TTL osf option (NLA_U8)
+ * @NFTA_OSF_FLAGS: flags (NLA_U32)
*/
enum nft_osf_attributes {
NFTA_OSF_UNSPEC,
NFTA_OSF_DREG,
NFTA_OSF_TTL,
+ NFTA_OSF_FLAGS,
__NFTA_OSF_MAX,
};
#define NFTA_OSF_MAX (__NFTA_OSF_MAX - 1)
+enum nft_osf_flags {
+ NFT_OSF_F_VERSION = (1 << 0),
+};
+
/**
* enum nft_device_attributes - nf_tables device netlink attributes
*
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index dd4f86ee286e..6f09d1500960 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -11,7 +11,7 @@
* Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
* Copyright 2008 Colin McCabe <colin@cozybit.com>
* Copyright 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018 Intel Corporation
+ * Copyright (C) 2018-2019 Intel Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -1065,6 +1065,26 @@
* indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes
* determining the width and type.
*
+ * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to
+ * offload OWE processing to user space. This intends to support
+ * OWE AKM by the host drivers that implement SME but rely
+ * on the user space for the cryptographic/DH IE processing in AP mode.
+ *
+ * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric
+ * refreshing, is that from one mesh point we be able to send some data
+ * frames to other mesh points which are not currently selected as a
+ * primary traffic path, but which are only 1 hop away. The absence of
+ * the primary path to the chosen node makes it necessary to apply some
+ * form of marking on a chosen packet stream so that the packets can be
+ * properly steered to the selected node for testing, and not by the
+ * regular mesh path lookup. Further, the packets must be of type data
+ * so that the rate control (often embedded in firmware) is used for
+ * rate selection.
+ *
+ * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh
+ * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
+ * content. The frame is ethernet data.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1285,6 +1305,10 @@ enum nl80211_commands {
NL80211_CMD_NOTIFY_RADAR,
+ NL80211_CMD_UPDATE_OWE_INFO,
+
+ NL80211_CMD_PROBE_MESH_LINK,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -2308,6 +2332,15 @@ enum nl80211_commands {
* @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
* scheduler.
*
+ * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for
+ * station associated with the AP. See &enum nl80211_tx_power_setting for
+ * possible values.
+ * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This
+ * allows to set Tx power for a station. If this attribute is not included,
+ * the default per-interface tx power setting will be overriding. Driver
+ * should be picking up the lowest tx power, either tx power per-interface
+ * or per-station.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2758,6 +2791,8 @@ enum nl80211_attrs {
NL80211_ATTR_PEER_MEASUREMENTS,
NL80211_ATTR_AIRTIME_WEIGHT,
+ NL80211_ATTR_STA_TX_POWER_SETTING,
+ NL80211_ATTR_STA_TX_POWER,
/* add attributes here, update the policy in nl80211.c */
@@ -2802,7 +2837,7 @@ enum nl80211_attrs {
#define NL80211_MAX_SUPP_RATES 32
#define NL80211_MAX_SUPP_HT_RATES 77
-#define NL80211_MAX_SUPP_REG_RULES 64
+#define NL80211_MAX_SUPP_REG_RULES 128
#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
@@ -3139,6 +3174,7 @@ enum nl80211_sta_bss_param {
* @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames
* sent to the station (u64, usec)
* @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16)
+ * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
@@ -3184,6 +3220,7 @@ enum nl80211_sta_info {
NL80211_STA_INFO_CONNECTED_TO_GATE,
NL80211_STA_INFO_TX_DURATION,
NL80211_STA_INFO_AIRTIME_WEIGHT,
+ NL80211_STA_INFO_AIRTIME_LINK_METRIC,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
@@ -3638,6 +3675,14 @@ enum nl80211_reg_rule_attr {
* value as specified by &struct nl80211_bss_select_rssi_adjust.
* @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
* (this cannot be used together with SSID).
+ * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
+ * band specific minimum rssi thresholds for the bands defined in
+ * enum nl80211_band. The minimum rssi threshold value(s32) specific to a
+ * band shall be encapsulated in attribute with type value equals to one
+ * of the NL80211_BAND_* defined in enum nl80211_band. For example, the
+ * minimum rssi threshold value for 2.4GHZ band shall be encapsulated
+ * within an attribute of type NL80211_BAND_2GHZ. And one or more of such
+ * attributes will be nested within this attribute.
* @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
* attribute number currently defined
* @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -3650,6 +3695,7 @@ enum nl80211_sched_scan_match_attr {
NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
+ NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI,
/* keep last */
__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -4135,6 +4181,27 @@ enum nl80211_channel_type {
};
/**
+ * enum nl80211_key_mode - Key mode
+ *
+ * @NL80211_KEY_RX_TX: (Default)
+ * Key can be used for Rx and Tx immediately
+ *
+ * The following modes can only be selected for unicast keys and when the
+ * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID:
+ *
+ * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY:
+ * Unicast key can only be used for Rx, Tx not allowed, yet
+ * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY:
+ * The unicast key identified by idx and mac is cleared for Tx and becomes
+ * the preferred Tx key for the station.
+ */
+enum nl80211_key_mode {
+ NL80211_KEY_RX_TX,
+ NL80211_KEY_NO_TX,
+ NL80211_KEY_SET_TX
+};
+
+/**
* enum nl80211_chan_width - channel width definitions
*
* These values are used with the %NL80211_ATTR_CHANNEL_WIDTH
@@ -4377,6 +4444,9 @@ enum nl80211_key_default_types {
* @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
* attributes, specifying what a key should be set as default as.
* See &enum nl80211_key_default_types.
+ * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode.
+ * Defaults to @NL80211_KEY_RX_TX.
+ *
* @__NL80211_KEY_AFTER_LAST: internal
* @NL80211_KEY_MAX: highest key attribute
*/
@@ -4390,6 +4460,7 @@ enum nl80211_key_attributes {
NL80211_KEY_DEFAULT_MGMT,
NL80211_KEY_TYPE,
NL80211_KEY_DEFAULT_TYPES,
+ NL80211_KEY_MODE,
/* keep last */
__NL80211_KEY_AFTER_LAST,
@@ -5335,6 +5406,8 @@ enum nl80211_feature_flags {
* able to rekey an in-use key correctly. Userspace must not rekey PTK keys
* if this flag is not set. Ignoring this can leak clear text packets and/or
* freeze the connection.
+ * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for
+ * Individually Addressed Frames" from IEEE802.11-2016.
*
* @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime
* fairness for transmitted packets and has enabled airtime fairness
@@ -5343,6 +5416,12 @@ enum nl80211_feature_flags {
* @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
* (set/del PMKSA operations) in AP mode.
*
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
+ * filtering of sched scan results using band specific RSSI thresholds.
+ *
+ * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
+ * to a station.
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -5384,6 +5463,9 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
+ NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
+ NL80211_EXT_FEATURE_EXT_KEY_ID,
+ NL80211_EXT_FEATURE_STA_TX_PWR,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h
index dbe0cbe4f1b7..f271f1ec50ae 100644
--- a/include/uapi/linux/openvswitch.h
+++ b/include/uapi/linux/openvswitch.h
@@ -364,6 +364,7 @@ enum ovs_tunnel_key_attr {
OVS_TUNNEL_KEY_ATTR_IPV6_DST, /* struct in6_addr dst IPv6 address. */
OVS_TUNNEL_KEY_ATTR_PAD,
OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS, /* struct erspan_metadata */
+ OVS_TUNNEL_KEY_ATTR_IPV4_INFO_BRIDGE, /* No argument. IPV4_INFO_BRIDGE mode.*/
__OVS_TUNNEL_KEY_ATTR_MAX
};
@@ -734,6 +735,7 @@ struct ovs_action_hash {
* be received on NFNLGRP_CONNTRACK_NEW and NFNLGRP_CONNTRACK_DESTROY groups,
* respectively. Remaining bits control the changes for which an event is
* delivered on the NFNLGRP_CONNTRACK_UPDATE group.
+ * @OVS_CT_ATTR_TIMEOUT: Variable length string defining conntrack timeout.
*/
enum ovs_ct_attr {
OVS_CT_ATTR_UNSPEC,
@@ -746,6 +748,8 @@ enum ovs_ct_attr {
OVS_CT_ATTR_NAT, /* Nested OVS_NAT_ATTR_* */
OVS_CT_ATTR_FORCE_COMMIT, /* No argument */
OVS_CT_ATTR_EVENTMASK, /* u32 mask of IPCT_* events. */
+ OVS_CT_ATTR_TIMEOUT, /* Associate timeout with this connection for
+ * fine-grain timeout tuning. */
__OVS_CT_ATTR_MAX
};
@@ -798,6 +802,44 @@ struct ovs_action_push_eth {
struct ovs_key_ethernet addresses;
};
+/*
+ * enum ovs_check_pkt_len_attr - Attributes for %OVS_ACTION_ATTR_CHECK_PKT_LEN.
+ *
+ * @OVS_CHECK_PKT_LEN_ATTR_PKT_LEN: u16 Packet length to check for.
+ * @OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_GREATER: Nested OVS_ACTION_ATTR_*
+ * actions to apply if the packer length is greater than the specified
+ * length in the attr - OVS_CHECK_PKT_LEN_ATTR_PKT_LEN.
+ * @OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_LESS_EQUAL - Nested OVS_ACTION_ATTR_*
+ * actions to apply if the packer length is lesser or equal to the specified
+ * length in the attr - OVS_CHECK_PKT_LEN_ATTR_PKT_LEN.
+ */
+enum ovs_check_pkt_len_attr {
+ OVS_CHECK_PKT_LEN_ATTR_UNSPEC,
+ OVS_CHECK_PKT_LEN_ATTR_PKT_LEN,
+ OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_GREATER,
+ OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_LESS_EQUAL,
+ __OVS_CHECK_PKT_LEN_ATTR_MAX,
+
+#ifdef __KERNEL__
+ OVS_CHECK_PKT_LEN_ATTR_ARG /* struct check_pkt_len_arg */
+#endif
+};
+
+#define OVS_CHECK_PKT_LEN_ATTR_MAX (__OVS_CHECK_PKT_LEN_ATTR_MAX - 1)
+
+#ifdef __KERNEL__
+struct check_pkt_len_arg {
+ u16 pkt_len; /* Same value as OVS_CHECK_PKT_LEN_ATTR_PKT_LEN'. */
+ bool exec_for_greater; /* When true, actions in IF_GREATER will
+ * not change flow keys. False otherwise.
+ */
+ bool exec_for_lesser_equal; /* When true, actions in IF_LESS_EQUAL
+ * will not change flow keys. False
+ * otherwise.
+ */
+};
+#endif
+
/**
* enum ovs_action_attr - Action types.
*
@@ -842,6 +884,9 @@ struct ovs_action_push_eth {
* packet, or modify the packet (e.g., change the DSCP field).
* @OVS_ACTION_ATTR_CLONE: make a copy of the packet and execute a list of
* actions without affecting the original packet and key.
+ * @OVS_ACTION_ATTR_CHECK_PKT_LEN: Check the packet length and execute a set
+ * of actions if greater than the specified packet length, else execute
+ * another set of actions.
*
* Only a single header can be set with a single %OVS_ACTION_ATTR_SET. Not all
* fields within a header are modifiable, e.g. the IPv4 protocol and fragment
@@ -876,6 +921,7 @@ enum ovs_action_attr {
OVS_ACTION_ATTR_POP_NSH, /* No argument. */
OVS_ACTION_ATTR_METER, /* u32 meter ID. */
OVS_ACTION_ATTR_CLONE, /* Nested OVS_CLONE_ATTR_*. */
+ OVS_ACTION_ATTR_CHECK_PKT_LEN, /* Nested OVS_CHECK_PKT_LEN_ATTR_*. */
__OVS_ACTION_ATTR_MAX, /* Nothing past this will be accepted
* from userspace. */
diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h
index 7ee74c3474bf..8b2f993cbb77 100644
--- a/include/uapi/linux/pkt_sched.h
+++ b/include/uapi/linux/pkt_sched.h
@@ -1148,6 +1148,16 @@ enum {
#define TCA_TAPRIO_SCHED_MAX (__TCA_TAPRIO_SCHED_MAX - 1)
+/* The format for the admin sched (dump only):
+ * [TCA_TAPRIO_SCHED_ADMIN_SCHED]
+ * [TCA_TAPRIO_ATTR_SCHED_BASE_TIME]
+ * [TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST]
+ * [TCA_TAPRIO_ATTR_SCHED_ENTRY]
+ * [TCA_TAPRIO_ATTR_SCHED_ENTRY_CMD]
+ * [TCA_TAPRIO_ATTR_SCHED_ENTRY_GATES]
+ * [TCA_TAPRIO_ATTR_SCHED_ENTRY_INTERVAL]
+ */
+
enum {
TCA_TAPRIO_ATTR_UNSPEC,
TCA_TAPRIO_ATTR_PRIOMAP, /* struct tc_mqprio_qopt */
@@ -1156,6 +1166,9 @@ enum {
TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY, /* single entry */
TCA_TAPRIO_ATTR_SCHED_CLOCKID, /* s32 */
TCA_TAPRIO_PAD,
+ TCA_TAPRIO_ATTR_ADMIN_SCHED, /* The admin sched, only used in dump */
+ TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME, /* s64 */
+ TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME_EXTENSION, /* s64 */
__TCA_TAPRIO_ATTR_MAX,
};
diff --git a/include/uapi/linux/sockios.h b/include/uapi/linux/sockios.h
index d393e9ed3964..7d1bccbbef78 100644
--- a/include/uapi/linux/sockios.h
+++ b/include/uapi/linux/sockios.h
@@ -19,6 +19,7 @@
#ifndef _LINUX_SOCKIOS_H
#define _LINUX_SOCKIOS_H
+#include <asm/bitsperlong.h>
#include <asm/sockios.h>
/* Linux-specific socket ioctls */
@@ -27,6 +28,26 @@
#define SOCK_IOC_TYPE 0x89
+/*
+ * the timeval/timespec data structure layout is defined by libc,
+ * so we need to cover both possible versions on 32-bit.
+ */
+/* Get stamp (timeval) */
+#define SIOCGSTAMP_NEW _IOR(SOCK_IOC_TYPE, 0x06, long long[2])
+/* Get stamp (timespec) */
+#define SIOCGSTAMPNS_NEW _IOR(SOCK_IOC_TYPE, 0x07, long long[2])
+
+#if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__))
+/* on 64-bit and x32, avoid the ?: operator */
+#define SIOCGSTAMP SIOCGSTAMP_OLD
+#define SIOCGSTAMPNS SIOCGSTAMPNS_OLD
+#else
+#define SIOCGSTAMP ((sizeof(struct timeval)) == 8 ? \
+ SIOCGSTAMP_OLD : SIOCGSTAMP_NEW)
+#define SIOCGSTAMPNS ((sizeof(struct timespec)) == 8 ? \
+ SIOCGSTAMPNS_OLD : SIOCGSTAMPNS_NEW)
+#endif
+
/* Routing table calls. */
#define SIOCADDRT 0x890B /* add routing table entry */
#define SIOCDELRT 0x890C /* delete routing table entry */
diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h
index 8bb6cc5f3235..b521464ea962 100644
--- a/include/uapi/linux/tcp.h
+++ b/include/uapi/linux/tcp.h
@@ -160,15 +160,42 @@ enum {
#define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */
#define TCPI_OPT_SYN_DATA 32 /* SYN-ACK acked data in SYN sent or rcvd */
+/*
+ * Sender's congestion state indicating normal or abnormal situations
+ * in the last round of packets sent. The state is driven by the ACK
+ * information and timer events.
+ */
enum tcp_ca_state {
+ /*
+ * Nothing bad has been observed recently.
+ * No apparent reordering, packet loss, or ECN marks.
+ */
TCP_CA_Open = 0,
#define TCPF_CA_Open (1<<TCP_CA_Open)
+ /*
+ * The sender enters disordered state when it has received DUPACKs or
+ * SACKs in the last round of packets sent. This could be due to packet
+ * loss or reordering but needs further information to confirm packets
+ * have been lost.
+ */
TCP_CA_Disorder = 1,
#define TCPF_CA_Disorder (1<<TCP_CA_Disorder)
+ /*
+ * The sender enters Congestion Window Reduction (CWR) state when it
+ * has received ACKs with ECN-ECE marks, or has experienced congestion
+ * or packet discard on the sender host (e.g. qdisc).
+ */
TCP_CA_CWR = 2,
#define TCPF_CA_CWR (1<<TCP_CA_CWR)
+ /*
+ * The sender is in fast recovery and retransmitting lost packets,
+ * typically triggered by ACK events.
+ */
TCP_CA_Recovery = 3,
#define TCPF_CA_Recovery (1<<TCP_CA_Recovery)
+ /*
+ * The sender is in loss recovery triggered by retransmission timeout.
+ */
TCP_CA_Loss = 4
#define TCPF_CA_Loss (1<<TCP_CA_Loss)
};
diff --git a/include/uapi/linux/tipc.h b/include/uapi/linux/tipc.h
index 6b2fd4d9655f..7df026ea6aff 100644
--- a/include/uapi/linux/tipc.h
+++ b/include/uapi/linux/tipc.h
@@ -190,6 +190,7 @@ struct sockaddr_tipc {
#define TIPC_MCAST_REPLICAST 134 /* Default: TIPC selects. No arg */
#define TIPC_GROUP_JOIN 135 /* Takes struct tipc_group_req* */
#define TIPC_GROUP_LEAVE 136 /* No argument */
+#define TIPC_SOCK_RECVQ_USED 137 /* Default: none (read only) */
/*
* Flag values
diff --git a/include/uapi/linux/tipc_netlink.h b/include/uapi/linux/tipc_netlink.h
index 0ebe02ef1a86..efb958fd167d 100644
--- a/include/uapi/linux/tipc_netlink.h
+++ b/include/uapi/linux/tipc_netlink.h
@@ -281,6 +281,8 @@ enum {
TIPC_NLA_PROP_TOL, /* u32 */
TIPC_NLA_PROP_WIN, /* u32 */
TIPC_NLA_PROP_MTU, /* u32 */
+ TIPC_NLA_PROP_BROADCAST, /* u32 */
+ TIPC_NLA_PROP_BROADCAST_RATIO, /* u32 */
__TIPC_NLA_PROP_MAX,
TIPC_NLA_PROP_MAX = __TIPC_NLA_PROP_MAX - 1
diff --git a/include/uapi/linux/tls.h b/include/uapi/linux/tls.h
index 401d6f01de6a..5b9c26753e46 100644
--- a/include/uapi/linux/tls.h
+++ b/include/uapi/linux/tls.h
@@ -70,6 +70,13 @@
#define TLS_CIPHER_AES_GCM_256_TAG_SIZE 16
#define TLS_CIPHER_AES_GCM_256_REC_SEQ_SIZE 8
+#define TLS_CIPHER_AES_CCM_128 53
+#define TLS_CIPHER_AES_CCM_128_IV_SIZE 8
+#define TLS_CIPHER_AES_CCM_128_KEY_SIZE 16
+#define TLS_CIPHER_AES_CCM_128_SALT_SIZE 4
+#define TLS_CIPHER_AES_CCM_128_TAG_SIZE 16
+#define TLS_CIPHER_AES_CCM_128_REC_SEQ_SIZE 8
+
#define TLS_SET_RECORD_TYPE 1
#define TLS_GET_RECORD_TYPE 2
@@ -94,4 +101,12 @@ struct tls12_crypto_info_aes_gcm_256 {
unsigned char rec_seq[TLS_CIPHER_AES_GCM_256_REC_SEQ_SIZE];
};
+struct tls12_crypto_info_aes_ccm_128 {
+ struct tls_crypto_info info;
+ unsigned char iv[TLS_CIPHER_AES_CCM_128_IV_SIZE];
+ unsigned char key[TLS_CIPHER_AES_CCM_128_KEY_SIZE];
+ unsigned char salt[TLS_CIPHER_AES_CCM_128_SALT_SIZE];
+ unsigned char rec_seq[TLS_CIPHER_AES_CCM_128_REC_SEQ_SIZE];
+};
+
#endif /* _UAPI_LINUX_TLS_H */