summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorMark Brown <broonie@kernel.org>2020-12-11 20:48:04 +0300
committerMark Brown <broonie@kernel.org>2020-12-11 20:48:04 +0300
commit460aa020f56c974a3e7e5b5378b2355fec6a2c11 (patch)
tree959dc05609eec2a040245f43964ae5738ee741cb /include
parent031616c434db05ce766f76c62865f55698e0924f (diff)
parent84de089e770b57280d87dff51be894b6fda18810 (diff)
downloadlinux-460aa020f56c974a3e7e5b5378b2355fec6a2c11.tar.xz
Merge remote-tracking branch 'asoc/for-5.11' into asoc-next
Diffstat (limited to 'include')
-rw-r--r--include/asm-generic/uaccess.h6
-rw-r--r--include/asm-generic/vmlinux.lds.h1
-rw-r--r--include/drm/drm_dp_helper.h2
-rw-r--r--include/drm/drm_edid.h7
-rw-r--r--include/drm/drm_print.h20
-rw-r--r--include/dt-bindings/sound/adi,adau1977.h15
-rw-r--r--include/kunit/test.h16
-rw-r--r--include/linux/arm-smccc.h2
-rw-r--r--include/linux/auxiliary_bus.h77
-rw-r--r--include/linux/blk-mq.h2
-rw-r--r--include/linux/can/skb.h20
-rw-r--r--include/linux/cpufreq.h11
-rw-r--r--include/linux/debugfs.h18
-rw-r--r--include/linux/dma/ti-cppi5.h4
-rw-r--r--include/linux/fs.h2
-rw-r--r--include/linux/io_uring.h3
-rw-r--r--include/linux/iomap.h2
-rw-r--r--include/linux/jbd2.h7
-rw-r--r--include/linux/jhash.h2
-rw-r--r--include/linux/mailbox/zynqmp-ipi-message.h2
-rw-r--r--include/linux/mic_bus.h100
-rw-r--r--include/linux/mlx5/driver.h18
-rw-r--r--include/linux/mlx5/mlx5_ifc.h4
-rw-r--r--include/linux/mm.h9
-rw-r--r--include/linux/mod_devicetable.h8
-rw-r--r--include/linux/module.h2
-rw-r--r--include/linux/netfilter/nfnetlink.h9
-rw-r--r--include/linux/netfilter_ipv4.h2
-rw-r--r--include/linux/netfilter_ipv6.h10
-rw-r--r--include/linux/pagemap.h8
-rw-r--r--include/linux/pgtable.h4
-rw-r--r--include/linux/phy.h40
-rw-r--r--include/linux/platform_data/adau1977.h44
-rw-r--r--include/linux/platform_data/cros_ec_commands.h14
-rw-r--r--include/linux/platform_data/cros_ec_proto.h2
-rw-r--r--include/linux/pm_runtime.h6
-rw-r--r--include/linux/refcount.h130
-rw-r--r--include/linux/regmap.h35
-rw-r--r--include/linux/scif.h1339
-rw-r--r--include/linux/seq_file.h1
-rw-r--r--include/linux/signal.h2
-rw-r--r--include/linux/soundwire/sdw.h4
-rw-r--r--include/linux/soundwire/sdw_registers.h32
-rw-r--r--include/linux/time64.h4
-rw-r--r--include/linux/usb/composite.h2
-rw-r--r--include/linux/vdpa.h15
-rw-r--r--include/net/cfg80211.h9
-rw-r--r--include/net/mac80211.h7
-rw-r--r--include/rdma/rdma_cm.h14
-rw-r--r--include/sound/control.h2
-rw-r--r--include/sound/core.h3
-rw-r--r--include/sound/graph_card.h16
-rw-r--r--include/sound/intel-dsp-config.h7
-rw-r--r--include/sound/pcm.h4
-rw-r--r--include/sound/rt5682.h1
-rw-r--r--include/sound/simple_card_utils.h3
-rw-r--r--include/sound/soc-acpi-intel-match.h2
-rw-r--r--include/sound/soc-acpi.h6
-rw-r--r--include/sound/soc-component.h31
-rw-r--r--include/sound/soc-dai.h42
-rw-r--r--include/sound/soc-jack.h132
-rw-r--r--include/sound/soc-link.h9
-rw-r--r--include/sound/soc-topology.h13
-rw-r--r--include/sound/soc.h132
-rw-r--r--include/sound/sof.h6
-rw-r--r--include/sound/sof/dai.h16
-rw-r--r--include/sound/sof/debug.h41
-rw-r--r--include/sound/sof/ext_manifest.h21
-rw-r--r--include/sound/sof/header.h15
-rw-r--r--include/sound/sof/trace.h28
-rw-r--r--include/trace/events/afs.h20
-rw-r--r--include/trace/events/asoc.h1
-rw-r--r--include/uapi/linux/icmpv6.h1
-rw-r--r--include/uapi/linux/mic_common.h235
-rw-r--r--include/uapi/linux/mic_ioctl.h77
-rw-r--r--include/uapi/linux/vhost.h4
-rw-r--r--include/uapi/linux/vhost_types.h9
-rw-r--r--include/uapi/sound/asoc.h22
-rw-r--r--include/uapi/sound/compress_offload.h2
-rw-r--r--include/uapi/sound/sof/abi.h2
-rw-r--r--include/video/imx-ipu-v3.h3
81 files changed, 798 insertions, 2201 deletions
diff --git a/include/asm-generic/uaccess.h b/include/asm-generic/uaccess.h
index 45f9872fd747..4973328f3c6e 100644
--- a/include/asm-generic/uaccess.h
+++ b/include/asm-generic/uaccess.h
@@ -12,7 +12,8 @@
#ifdef CONFIG_UACCESS_MEMCPY
#include <asm/unaligned.h>
-static inline int __get_user_fn(size_t size, const void __user *from, void *to)
+static __always_inline int
+__get_user_fn(size_t size, const void __user *from, void *to)
{
BUILD_BUG_ON(!__builtin_constant_p(size));
@@ -37,7 +38,8 @@ static inline int __get_user_fn(size_t size, const void __user *from, void *to)
}
#define __get_user_fn(sz, u, k) __get_user_fn(sz, u, k)
-static inline int __put_user_fn(size_t size, void __user *to, void *from)
+static __always_inline int
+__put_user_fn(size_t size, void __user *to, void *from)
{
BUILD_BUG_ON(!__builtin_constant_p(size));
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index cd14444bf600..b2b3d81b1535 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -701,6 +701,7 @@
#ifdef CONFIG_CONSTRUCTORS
#define KERNEL_CTORS() . = ALIGN(8); \
__ctors_start = .; \
+ KEEP(*(SORT(.ctors.*))) \
KEEP(*(.ctors)) \
KEEP(*(SORT(.init_array.*))) \
KEEP(*(.init_array)) \
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index da53aebb7230..a53243abd945 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -1836,7 +1836,7 @@ static inline void drm_dp_cec_unset_edid(struct drm_dp_aux *aux)
* @link_rate: Requested Link rate from DPCD 0x219
* @num_lanes: Number of lanes requested by sing through DPCD 0x220
* @phy_pattern: DP Phy test pattern from DPCD 0x248
- * @hb2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B
+ * @hbr2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B
* @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250 through 0x259
* @enhanced_frame_cap: flag for enhanced frame capability.
*/
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index b27a0e2169c8..e97daf6ffbb1 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -359,13 +359,6 @@ drm_load_edid_firmware(struct drm_connector *connector)
}
#endif
-/**
- * drm_edid_are_equal - compare two edid blobs.
- * @edid1: pointer to first blob
- * @edid2: pointer to second blob
- * This helper can be used during probing to determine if
- * edid had changed.
- */
bool drm_edid_are_equal(const struct edid *edid1, const struct edid *edid2);
int
diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
index 1c9417430d08..f32d179e139d 100644
--- a/include/drm/drm_print.h
+++ b/include/drm/drm_print.h
@@ -338,7 +338,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
const char *format, ...);
/**
- * Error output.
+ * DRM_DEV_ERROR() - Error output.
*
* @dev: device pointer
* @fmt: printf() like format string.
@@ -347,10 +347,12 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
drm_dev_printk(dev, KERN_ERR, "*ERROR* " fmt, ##__VA_ARGS__)
/**
- * Rate limited error output. Like DRM_ERROR() but won't flood the log.
+ * DRM_DEV_ERROR_RATELIMITED() - Rate limited error output.
*
* @dev: device pointer
* @fmt: printf() like format string.
+ *
+ * Like DRM_ERROR() but won't flood the log.
*/
#define DRM_DEV_ERROR_RATELIMITED(dev, fmt, ...) \
({ \
@@ -375,15 +377,27 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
})
/**
- * Debug output.
+ * DRM_DEV_DEBUG() - Debug output for generic drm code
*
* @dev: device pointer
* @fmt: printf() like format string.
*/
#define DRM_DEV_DEBUG(dev, fmt, ...) \
drm_dev_dbg(dev, DRM_UT_CORE, fmt, ##__VA_ARGS__)
+/**
+ * DRM_DEV_DEBUG_DRIVER() - Debug output for vendor specific part of the driver
+ *
+ * @dev: device pointer
+ * @fmt: printf() like format string.
+ */
#define DRM_DEV_DEBUG_DRIVER(dev, fmt, ...) \
drm_dev_dbg(dev, DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
+/**
+ * DRM_DEV_DEBUG_KMS() - Debug output for modesetting code
+ *
+ * @dev: device pointer
+ * @fmt: printf() like format string.
+ */
#define DRM_DEV_DEBUG_KMS(dev, fmt, ...) \
drm_dev_dbg(dev, DRM_UT_KMS, fmt, ##__VA_ARGS__)
diff --git a/include/dt-bindings/sound/adi,adau1977.h b/include/dt-bindings/sound/adi,adau1977.h
new file mode 100644
index 000000000000..8eebec6570f2
--- /dev/null
+++ b/include/dt-bindings/sound/adi,adau1977.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __DT_BINDINGS_ADI_ADAU1977_H__
+#define __DT_BINDINGS_ADI_ADAU1977_H__
+
+#define ADAU1977_MICBIAS_5V0 0x0
+#define ADAU1977_MICBIAS_5V5 0x1
+#define ADAU1977_MICBIAS_6V0 0x2
+#define ADAU1977_MICBIAS_6V5 0x3
+#define ADAU1977_MICBIAS_7V0 0x4
+#define ADAU1977_MICBIAS_7V5 0x5
+#define ADAU1977_MICBIAS_8V0 0x6
+#define ADAU1977_MICBIAS_8V5 0x7
+#define ADAU1977_MICBIAS_9V0 0x8
+
+#endif /* __DT_BINDINGS_ADI_ADAU1977_H__ */
diff --git a/include/kunit/test.h b/include/kunit/test.h
index 9197da792336..db1b0ae666c4 100644
--- a/include/kunit/test.h
+++ b/include/kunit/test.h
@@ -252,13 +252,14 @@ static inline int kunit_run_all_tests(void)
}
#endif /* IS_BUILTIN(CONFIG_KUNIT) */
+#ifdef MODULE
/**
- * kunit_test_suites() - used to register one or more &struct kunit_suite
- * with KUnit.
+ * kunit_test_suites_for_module() - used to register one or more
+ * &struct kunit_suite with KUnit.
*
- * @suites_list...: a statically allocated list of &struct kunit_suite.
+ * @__suites: a statically allocated list of &struct kunit_suite.
*
- * Registers @suites_list with the test framework. See &struct kunit_suite for
+ * Registers @__suites with the test framework. See &struct kunit_suite for
* more information.
*
* If a test suite is built-in, module_init() gets translated into
@@ -267,7 +268,6 @@ static inline int kunit_run_all_tests(void)
* module_{init|exit} functions for the builtin case when registering
* suites via kunit_test_suites() below.
*/
-#ifdef MODULE
#define kunit_test_suites_for_module(__suites) \
static int __init kunit_test_suites_init(void) \
{ \
@@ -294,7 +294,7 @@ static inline int kunit_run_all_tests(void)
* kunit_test_suites() - used to register one or more &struct kunit_suite
* with KUnit.
*
- * @suites: a statically allocated list of &struct kunit_suite.
+ * @__suites: a statically allocated list of &struct kunit_suite.
*
* Registers @suites with the test framework. See &struct kunit_suite for
* more information.
@@ -308,10 +308,10 @@ static inline int kunit_run_all_tests(void)
* module.
*
*/
-#define kunit_test_suites(...) \
+#define kunit_test_suites(__suites...) \
__kunit_test_suites(__UNIQUE_ID(array), \
__UNIQUE_ID(suites), \
- __VA_ARGS__)
+ ##__suites)
#define kunit_test_suite(suite) kunit_test_suites(&suite)
diff --git a/include/linux/arm-smccc.h b/include/linux/arm-smccc.h
index 885c9ffc835c..f860645f6512 100644
--- a/include/linux/arm-smccc.h
+++ b/include/linux/arm-smccc.h
@@ -87,6 +87,8 @@
ARM_SMCCC_SMC_32, \
0, 0x7fff)
+#define SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED 1
+
/* Paravirtualised time calls (defined by ARM DEN0057A) */
#define ARM_SMCCC_HV_PV_TIME_FEATURES \
ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, \
diff --git a/include/linux/auxiliary_bus.h b/include/linux/auxiliary_bus.h
new file mode 100644
index 000000000000..fc51d45f106b
--- /dev/null
+++ b/include/linux/auxiliary_bus.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2019-2020 Intel Corporation
+ *
+ * Please see Documentation/driver-api/auxiliary_bus.rst for more information.
+ */
+
+#ifndef _AUXILIARY_BUS_H_
+#define _AUXILIARY_BUS_H_
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+struct auxiliary_device {
+ struct device dev;
+ const char *name;
+ u32 id;
+};
+
+struct auxiliary_driver {
+ int (*probe)(struct auxiliary_device *auxdev, const struct auxiliary_device_id *id);
+ void (*remove)(struct auxiliary_device *auxdev);
+ void (*shutdown)(struct auxiliary_device *auxdev);
+ int (*suspend)(struct auxiliary_device *auxdev, pm_message_t state);
+ int (*resume)(struct auxiliary_device *auxdev);
+ const char *name;
+ struct device_driver driver;
+ const struct auxiliary_device_id *id_table;
+};
+
+static inline struct auxiliary_device *to_auxiliary_dev(struct device *dev)
+{
+ return container_of(dev, struct auxiliary_device, dev);
+}
+
+static inline struct auxiliary_driver *to_auxiliary_drv(struct device_driver *drv)
+{
+ return container_of(drv, struct auxiliary_driver, driver);
+}
+
+int auxiliary_device_init(struct auxiliary_device *auxdev);
+int __auxiliary_device_add(struct auxiliary_device *auxdev, const char *modname);
+#define auxiliary_device_add(auxdev) __auxiliary_device_add(auxdev, KBUILD_MODNAME)
+
+static inline void auxiliary_device_uninit(struct auxiliary_device *auxdev)
+{
+ put_device(&auxdev->dev);
+}
+
+static inline void auxiliary_device_delete(struct auxiliary_device *auxdev)
+{
+ device_del(&auxdev->dev);
+}
+
+int __auxiliary_driver_register(struct auxiliary_driver *auxdrv, struct module *owner,
+ const char *modname);
+#define auxiliary_driver_register(auxdrv) \
+ __auxiliary_driver_register(auxdrv, THIS_MODULE, KBUILD_MODNAME)
+
+void auxiliary_driver_unregister(struct auxiliary_driver *auxdrv);
+
+/**
+ * module_auxiliary_driver() - Helper macro for registering an auxiliary driver
+ * @__auxiliary_driver: auxiliary driver struct
+ *
+ * Helper macro for auxiliary drivers which do not do anything special in
+ * module init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_auxiliary_driver(__auxiliary_driver) \
+ module_driver(__auxiliary_driver, auxiliary_driver_register, auxiliary_driver_unregister)
+
+struct auxiliary_device *auxiliary_find_device(struct device *start,
+ const void *data,
+ int (*match)(struct device *dev, const void *data));
+
+#endif /* _AUXILIARY_BUS_H_ */
diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h
index b23eeca4d677..794b2a33a2c3 100644
--- a/include/linux/blk-mq.h
+++ b/include/linux/blk-mq.h
@@ -235,6 +235,8 @@ enum hctx_type {
* @flags: Zero or more BLK_MQ_F_* flags.
* @driver_data: Pointer to data owned by the block driver that created this
* tag set.
+ * @active_queues_shared_sbitmap:
+ * number of active request queues per tag set.
* @__bitmap_tags: A shared tags sbitmap, used over all hctx's
* @__breserved_tags:
* A shared reserved tags sbitmap, used over all hctx's
diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h
index 900b9f4e0605..fc61cf4eff1c 100644
--- a/include/linux/can/skb.h
+++ b/include/linux/can/skb.h
@@ -61,21 +61,17 @@ static inline void can_skb_set_owner(struct sk_buff *skb, struct sock *sk)
*/
static inline struct sk_buff *can_create_echo_skb(struct sk_buff *skb)
{
- if (skb_shared(skb)) {
- struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC);
+ struct sk_buff *nskb;
- if (likely(nskb)) {
- can_skb_set_owner(nskb, skb->sk);
- consume_skb(skb);
- return nskb;
- } else {
- kfree_skb(skb);
- return NULL;
- }
+ nskb = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!nskb)) {
+ kfree_skb(skb);
+ return NULL;
}
- /* we can assume to have an unshared skb with proper owner */
- return skb;
+ can_skb_set_owner(nskb, skb->sk);
+ consume_skb(skb);
+ return nskb;
}
#endif /* !_CAN_SKB_H */
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index fa37b1c66443..1eaa04f1bae6 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -298,7 +298,7 @@ __ATTR(_name, 0644, show_##_name, store_##_name)
struct cpufreq_driver {
char name[CPUFREQ_NAME_LEN];
- u8 flags;
+ u16 flags;
void *driver_data;
/* needed by all drivers */
@@ -422,9 +422,18 @@ struct cpufreq_driver {
*/
#define CPUFREQ_IS_COOLING_DEV BIT(7)
+/*
+ * Set by drivers that need to update internale upper and lower boundaries along
+ * with the target frequency and so the core and governors should also invoke
+ * the diver if the target frequency does not change, but the policy min or max
+ * may have changed.
+ */
+#define CPUFREQ_NEED_UPDATE_LIMITS BIT(8)
+
int cpufreq_register_driver(struct cpufreq_driver *driver_data);
int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
+bool cpufreq_driver_test_flags(u16 flags);
const char *cpufreq_get_current_driver(void);
void *cpufreq_get_driver_data(void);
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index 851dd1f9a8a5..d6c4cc9ecc77 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -144,10 +144,9 @@ void debugfs_create_u32_array(const char *name, umode_t mode,
struct dentry *parent,
struct debugfs_u32_array *array);
-struct dentry *debugfs_create_devm_seqfile(struct device *dev, const char *name,
- struct dentry *parent,
- int (*read_fn)(struct seq_file *s,
- void *data));
+void debugfs_create_devm_seqfile(struct device *dev, const char *name,
+ struct dentry *parent,
+ int (*read_fn)(struct seq_file *s, void *data));
bool debugfs_initialized(void);
@@ -327,13 +326,12 @@ static inline void debugfs_create_u32_array(const char *name, umode_t mode,
{
}
-static inline struct dentry *debugfs_create_devm_seqfile(struct device *dev,
- const char *name,
- struct dentry *parent,
- int (*read_fn)(struct seq_file *s,
- void *data))
+static inline void debugfs_create_devm_seqfile(struct device *dev,
+ const char *name,
+ struct dentry *parent,
+ int (*read_fn)(struct seq_file *s,
+ void *data))
{
- return ERR_PTR(-ENODEV);
}
static inline ssize_t debugfs_read_file_bool(struct file *file,
diff --git a/include/linux/dma/ti-cppi5.h b/include/linux/dma/ti-cppi5.h
index 5896441ee604..efa2f0309f00 100644
--- a/include/linux/dma/ti-cppi5.h
+++ b/include/linux/dma/ti-cppi5.h
@@ -47,7 +47,7 @@ struct cppi5_host_desc_t {
u32 buf_info1;
u32 org_buf_len;
u64 org_buf_ptr;
- u32 epib[0];
+ u32 epib[];
} __packed;
#define CPPI5_DESC_MIN_ALIGN (16U)
@@ -139,7 +139,7 @@ struct cppi5_desc_epib_t {
*/
struct cppi5_monolithic_desc_t {
struct cppi5_desc_hdr_t hdr;
- u32 epib[0];
+ u32 epib[];
};
#define CPPI5_INFO2_MDESC_DATA_OFFSET_SHIFT (18U)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0bd126418bb6..21cc971fd960 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3285,7 +3285,7 @@ static inline ino_t parent_ino(struct dentry *dentry)
*/
struct simple_transaction_argresp {
ssize_t size;
- char data[0];
+ char data[];
};
#define SIMPLE_TRANSACTION_LIMIT (PAGE_SIZE - sizeof(struct simple_transaction_argresp))
diff --git a/include/linux/io_uring.h b/include/linux/io_uring.h
index 868364cea3b7..35b2d845704d 100644
--- a/include/linux/io_uring.h
+++ b/include/linux/io_uring.h
@@ -30,7 +30,8 @@ struct io_uring_task {
struct percpu_counter inflight;
struct io_identity __identity;
struct io_identity *identity;
- bool in_idle;
+ atomic_t in_idle;
+ bool sqpoll;
};
#if defined(CONFIG_IO_URING)
diff --git a/include/linux/iomap.h b/include/linux/iomap.h
index 172b3397a1a3..5bd3cac4df9c 100644
--- a/include/linux/iomap.h
+++ b/include/linux/iomap.h
@@ -221,7 +221,7 @@ struct iomap_writeback_ops {
* Optional, allows the file system to discard state on a page where
* we failed to submit any I/O.
*/
- void (*discard_page)(struct page *page);
+ void (*discard_page)(struct page *page, loff_t fileoff);
};
struct iomap_writepage_ctx {
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index fb3d71ad6eea..1d5566af48ac 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -263,7 +263,10 @@ typedef struct journal_superblock_s
/* 0x0050 */
__u8 s_checksum_type; /* checksum type */
__u8 s_padding2[3];
- __u32 s_padding[42];
+/* 0x0054 */
+ __be32 s_num_fc_blks; /* Number of fast commit blocks */
+/* 0x0058 */
+ __u32 s_padding[41];
__be32 s_checksum; /* crc32c(superblock) */
/* 0x0100 */
@@ -1253,7 +1256,7 @@ struct journal_s
*/
void (*j_fc_cleanup_callback)(struct journal_s *journal, int);
- /*
+ /**
* @j_fc_replay_callback:
*
* File-system specific function that performs replay of a fast
diff --git a/include/linux/jhash.h b/include/linux/jhash.h
index cfb62e9f37be..ab7f8c152b89 100644
--- a/include/linux/jhash.h
+++ b/include/linux/jhash.h
@@ -99,6 +99,7 @@ static inline u32 jhash(const void *key, u32 length, u32 initval)
case 2: a += (u32)k[1]<<8; fallthrough;
case 1: a += k[0];
__jhash_final(a, b, c);
+ break;
case 0: /* Nothing left to add */
break;
}
@@ -136,6 +137,7 @@ static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
case 2: b += k[1]; fallthrough;
case 1: a += k[0];
__jhash_final(a, b, c);
+ break;
case 0: /* Nothing left to add */
break;
}
diff --git a/include/linux/mailbox/zynqmp-ipi-message.h b/include/linux/mailbox/zynqmp-ipi-message.h
index 9542b41eacfd..35ce84c8ca02 100644
--- a/include/linux/mailbox/zynqmp-ipi-message.h
+++ b/include/linux/mailbox/zynqmp-ipi-message.h
@@ -14,7 +14,7 @@
*/
struct zynqmp_ipi_message {
size_t len;
- u8 data[0];
+ u8 data[];
};
#endif /* _LINUX_ZYNQMP_IPI_MESSAGE_H_ */
diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h
deleted file mode 100644
index e99c789424e0..000000000000
--- a/include/linux/mic_bus.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Intel MIC Platform Software Stack (MPSS)
- *
- * Copyright(c) 2014 Intel Corporation.
- *
- * Intel MIC Bus driver.
- *
- * This implementation is very similar to the virtio bus driver
- * implementation @ include/linux/virtio.h.
- */
-#ifndef _MIC_BUS_H_
-#define _MIC_BUS_H_
-/*
- * Everything a mbus driver needs to work with any particular mbus
- * implementation.
- */
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-
-struct mbus_device_id {
- __u32 device;
- __u32 vendor;
-};
-
-#define MBUS_DEV_DMA_HOST 2
-#define MBUS_DEV_DMA_MIC 3
-#define MBUS_DEV_ANY_ID 0xffffffff
-
-/**
- * mbus_device - representation of a device using mbus
- * @mmio_va: virtual address of mmio space
- * @hw_ops: the hardware ops supported by this device.
- * @id: the device type identification (used to match it with a driver).
- * @dev: underlying device.
- * be used to communicate with.
- * @index: unique position on the mbus bus
- */
-struct mbus_device {
- void __iomem *mmio_va;
- struct mbus_hw_ops *hw_ops;
- struct mbus_device_id id;
- struct device dev;
- int index;
-};
-
-/**
- * mbus_driver - operations for a mbus I/O driver
- * @driver: underlying device driver (populate name and owner).
- * @id_table: the ids serviced by this driver.
- * @probe: the function to call when a device is found. Returns 0 or -errno.
- * @remove: the function to call when a device is removed.
- */
-struct mbus_driver {
- struct device_driver driver;
- const struct mbus_device_id *id_table;
- int (*probe)(struct mbus_device *dev);
- void (*scan)(struct mbus_device *dev);
- void (*remove)(struct mbus_device *dev);
-};
-
-/**
- * struct mic_irq - opaque pointer used as cookie
- */
-struct mic_irq;
-
-/**
- * mbus_hw_ops - Hardware operations for accessing a MIC device on the MIC bus.
- */
-struct mbus_hw_ops {
- struct mic_irq* (*request_threaded_irq)(struct mbus_device *mbdev,
- irq_handler_t handler,
- irq_handler_t thread_fn,
- const char *name, void *data,
- int intr_src);
- void (*free_irq)(struct mbus_device *mbdev,
- struct mic_irq *cookie, void *data);
- void (*ack_interrupt)(struct mbus_device *mbdev, int num);
-};
-
-struct mbus_device *
-mbus_register_device(struct device *pdev, int id, const struct dma_map_ops *dma_ops,
- struct mbus_hw_ops *hw_ops, int index,
- void __iomem *mmio_va);
-void mbus_unregister_device(struct mbus_device *mbdev);
-
-int mbus_register_driver(struct mbus_driver *drv);
-void mbus_unregister_driver(struct mbus_driver *drv);
-
-static inline struct mbus_device *dev_to_mbus(struct device *_dev)
-{
- return container_of(_dev, struct mbus_device, dev);
-}
-
-static inline struct mbus_driver *drv_to_mbus(struct device_driver *drv)
-{
- return container_of(drv, struct mbus_driver, driver);
-}
-
-#endif /* _MIC_BUS_H */
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index add85094f9a5..0f23e1ed5e71 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -1213,4 +1213,22 @@ static inline bool mlx5_is_roce_enabled(struct mlx5_core_dev *dev)
return val.vbool;
}
+/**
+ * mlx5_core_net - Provide net namespace of the mlx5_core_dev
+ * @dev: mlx5 core device
+ *
+ * mlx5_core_net() returns the net namespace of mlx5 core device.
+ * This can be called only in below described limited context.
+ * (a) When a devlink instance for mlx5_core is registered and
+ * when devlink reload operation is disabled.
+ * or
+ * (b) during devlink reload reload_down() and reload_up callbacks
+ * where it is ensured that devlink instance's net namespace is
+ * stable.
+ */
+static inline struct net *mlx5_core_net(struct mlx5_core_dev *dev)
+{
+ return devlink_net(priv_to_devlink(dev));
+}
+
#endif /* MLX5_DRIVER_H */
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 651591a2965d..a092346c7b2d 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -5823,7 +5823,7 @@ struct mlx5_ifc_alloc_modify_header_context_in_bits {
u8 reserved_at_68[0x10];
u8 num_of_actions[0x8];
- union mlx5_ifc_set_add_copy_action_in_auto_bits actions[0];
+ union mlx5_ifc_set_add_copy_action_in_auto_bits actions[];
};
struct mlx5_ifc_dealloc_modify_header_context_out_bits {
@@ -9761,7 +9761,7 @@ struct mlx5_ifc_mcda_reg_bits {
u8 reserved_at_60[0x20];
- u8 data[0][0x20];
+ u8 data[][0x20];
};
enum {
diff --git a/include/linux/mm.h b/include/linux/mm.h
index ef360fe70aaf..db6ae4d3fb4e 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -2759,6 +2759,15 @@ static inline vm_fault_t vmf_insert_page(struct vm_area_struct *vma,
return VM_FAULT_NOPAGE;
}
+#ifndef io_remap_pfn_range
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+ unsigned long addr, unsigned long pfn,
+ unsigned long size, pgprot_t prot)
+{
+ return remap_pfn_range(vma, addr, pfn, size, pgprot_decrypted(prot));
+}
+#endif
+
static inline vm_fault_t vmf_error(int err)
{
if (err == -ENOMEM)
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 5b08a473cdba..c425290b21e2 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -838,4 +838,12 @@ struct mhi_device_id {
kernel_ulong_t driver_data;
};
+#define AUXILIARY_NAME_SIZE 32
+#define AUXILIARY_MODULE_PREFIX "auxiliary:"
+
+struct auxiliary_device_id {
+ char name[AUXILIARY_NAME_SIZE];
+ kernel_ulong_t driver_data;
+};
+
#endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/module.h b/include/linux/module.h
index 7ccdf87f376f..6264617bab4d 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -740,7 +740,7 @@ static inline bool within_module(unsigned long addr, const struct module *mod)
}
/* Get/put a kernel symbol (calls should be symmetric) */
-#define symbol_get(x) ({ extern typeof(x) x __attribute__((weak)); &(x); })
+#define symbol_get(x) ({ extern typeof(x) x __attribute__((weak,visibility("hidden"))); &(x); })
#define symbol_put(x) do { } while (0)
#define symbol_put_addr(x) do { } while (0)
diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h
index 89016d08f6a2..f6267e2883f2 100644
--- a/include/linux/netfilter/nfnetlink.h
+++ b/include/linux/netfilter/nfnetlink.h
@@ -24,6 +24,12 @@ struct nfnl_callback {
const u_int16_t attr_count; /* number of nlattr's */
};
+enum nfnl_abort_action {
+ NFNL_ABORT_NONE = 0,
+ NFNL_ABORT_AUTOLOAD,
+ NFNL_ABORT_VALIDATE,
+};
+
struct nfnetlink_subsystem {
const char *name;
__u8 subsys_id; /* nfnetlink subsystem ID */
@@ -31,7 +37,8 @@ struct nfnetlink_subsystem {
const struct nfnl_callback *cb; /* callback for individual types */
struct module *owner;
int (*commit)(struct net *net, struct sk_buff *skb);
- int (*abort)(struct net *net, struct sk_buff *skb, bool autoload);
+ int (*abort)(struct net *net, struct sk_buff *skb,
+ enum nfnl_abort_action action);
void (*cleanup)(struct net *net);
bool (*valid_genid)(struct net *net, u32 genid);
};
diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h
index 082e2c41b7ff..5b70ca868bb1 100644
--- a/include/linux/netfilter_ipv4.h
+++ b/include/linux/netfilter_ipv4.h
@@ -16,7 +16,7 @@ struct ip_rt_info {
u_int32_t mark;
};
-int ip_route_me_harder(struct net *net, struct sk_buff *skb, unsigned addr_type);
+int ip_route_me_harder(struct net *net, struct sock *sk, struct sk_buff *skb, unsigned addr_type);
struct nf_queue_entry;
diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h
index 9b67394471e1..48314ade1506 100644
--- a/include/linux/netfilter_ipv6.h
+++ b/include/linux/netfilter_ipv6.h
@@ -42,7 +42,7 @@ struct nf_ipv6_ops {
#if IS_MODULE(CONFIG_IPV6)
int (*chk_addr)(struct net *net, const struct in6_addr *addr,
const struct net_device *dev, int strict);
- int (*route_me_harder)(struct net *net, struct sk_buff *skb);
+ int (*route_me_harder)(struct net *net, struct sock *sk, struct sk_buff *skb);
int (*dev_get_saddr)(struct net *net, const struct net_device *dev,
const struct in6_addr *daddr, unsigned int srcprefs,
struct in6_addr *saddr);
@@ -143,9 +143,9 @@ static inline int nf_br_ip6_fragment(struct net *net, struct sock *sk,
#endif
}
-int ip6_route_me_harder(struct net *net, struct sk_buff *skb);
+int ip6_route_me_harder(struct net *net, struct sock *sk, struct sk_buff *skb);
-static inline int nf_ip6_route_me_harder(struct net *net, struct sk_buff *skb)
+static inline int nf_ip6_route_me_harder(struct net *net, struct sock *sk, struct sk_buff *skb)
{
#if IS_MODULE(CONFIG_IPV6)
const struct nf_ipv6_ops *v6_ops = nf_get_ipv6_ops();
@@ -153,9 +153,9 @@ static inline int nf_ip6_route_me_harder(struct net *net, struct sk_buff *skb)
if (!v6_ops)
return -EHOSTUNREACH;
- return v6_ops->route_me_harder(net, skb);
+ return v6_ops->route_me_harder(net, sk, skb);
#elif IS_BUILTIN(CONFIG_IPV6)
- return ip6_route_me_harder(net, skb);
+ return ip6_route_me_harder(net, sk, skb);
#else
return -EHOSTUNREACH;
#endif
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index c77b7c31b2e4..e1e19c1f9ec9 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -344,9 +344,9 @@ static inline struct page *find_get_page_flags(struct address_space *mapping,
/**
* find_lock_page - locate, pin and lock a pagecache page
* @mapping: the address_space to search
- * @offset: the page index
+ * @index: the page index
*
- * Looks up the page cache entry at @mapping & @offset. If there is a
+ * Looks up the page cache entry at @mapping & @index. If there is a
* page cache page, it is returned locked and with an increased
* refcount.
*
@@ -363,9 +363,9 @@ static inline struct page *find_lock_page(struct address_space *mapping,
/**
* find_lock_head - Locate, pin and lock a pagecache page.
* @mapping: The address_space to search.
- * @offset: The page index.
+ * @index: The page index.
*
- * Looks up the page cache entry at @mapping & @offset. If there is a
+ * Looks up the page cache entry at @mapping & @index. If there is a
* page cache page, its head page is returned locked and with an increased
* refcount.
*
diff --git a/include/linux/pgtable.h b/include/linux/pgtable.h
index 38c33eabea89..71125a4676c4 100644
--- a/include/linux/pgtable.h
+++ b/include/linux/pgtable.h
@@ -1427,10 +1427,6 @@ typedef unsigned int pgtbl_mod_mask;
#endif /* !__ASSEMBLY__ */
-#ifndef io_remap_pfn_range
-#define io_remap_pfn_range remap_pfn_range
-#endif
-
#ifndef has_transparent_hugepage
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
#define has_transparent_hugepage() 1
diff --git a/include/linux/phy.h b/include/linux/phy.h
index eb3cb1a98b45..56563e5e0dc7 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -147,16 +147,8 @@ typedef enum {
PHY_INTERFACE_MODE_MAX,
} phy_interface_t;
-/**
+/*
* phy_supported_speeds - return all speeds currently supported by a PHY device
- * @phy: The PHY device to return supported speeds of.
- * @speeds: buffer to store supported speeds in.
- * @size: size of speeds buffer.
- *
- * Description: Returns the number of supported speeds, and fills
- * the speeds buffer with the supported speeds. If speeds buffer is
- * too small to contain all currently supported speeds, will return as
- * many speeds as can fit.
*/
unsigned int phy_supported_speeds(struct phy_device *phy,
unsigned int *speeds,
@@ -1022,14 +1014,9 @@ static inline int __phy_modify_changed(struct phy_device *phydev, u32 regnum,
regnum, mask, set);
}
-/**
+/*
* phy_read_mmd - Convenience function for reading a register
* from an MMD on a given PHY.
- * @phydev: The phy_device struct
- * @devad: The MMD to read from
- * @regnum: The register on the MMD to read
- *
- * Same rules as for phy_read();
*/
int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
@@ -1064,38 +1051,21 @@ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
__ret; \
})
-/**
+/*
* __phy_read_mmd - Convenience function for reading a register
* from an MMD on a given PHY.
- * @phydev: The phy_device struct
- * @devad: The MMD to read from
- * @regnum: The register on the MMD to read
- *
- * Same rules as for __phy_read();
*/
int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
-/**
+/*
* phy_write_mmd - Convenience function for writing a register
* on an MMD on a given PHY.
- * @phydev: The phy_device struct
- * @devad: The MMD to write to
- * @regnum: The register on the MMD to read
- * @val: value to write to @regnum
- *
- * Same rules as for phy_write();
*/
int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
-/**
+/*
* __phy_write_mmd - Convenience function for writing a register
* on an MMD on a given PHY.
- * @phydev: The phy_device struct
- * @devad: The MMD to write to
- * @regnum: The register on the MMD to read
- * @val: value to write to @regnum
- *
- * Same rules as for __phy_write();
*/
int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
diff --git a/include/linux/platform_data/adau1977.h b/include/linux/platform_data/adau1977.h
deleted file mode 100644
index 86667235077a..000000000000
--- a/include/linux/platform_data/adau1977.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * ADAU1977/ADAU1978/ADAU1979 driver
- *
- * Copyright 2014 Analog Devices Inc.
- * Author: Lars-Peter Clausen <lars@metafoo.de>
- */
-
-#ifndef __LINUX_PLATFORM_DATA_ADAU1977_H__
-#define __LINUX_PLATFORM_DATA_ADAU1977_H__
-
-/**
- * enum adau1977_micbias - ADAU1977 MICBIAS pin voltage setting
- * @ADAU1977_MICBIAS_5V0: MICBIAS is set to 5.0 V
- * @ADAU1977_MICBIAS_5V5: MICBIAS is set to 5.5 V
- * @ADAU1977_MICBIAS_6V0: MICBIAS is set to 6.0 V
- * @ADAU1977_MICBIAS_6V5: MICBIAS is set to 6.5 V
- * @ADAU1977_MICBIAS_7V0: MICBIAS is set to 7.0 V
- * @ADAU1977_MICBIAS_7V5: MICBIAS is set to 7.5 V
- * @ADAU1977_MICBIAS_8V0: MICBIAS is set to 8.0 V
- * @ADAU1977_MICBIAS_8V5: MICBIAS is set to 8.5 V
- * @ADAU1977_MICBIAS_9V0: MICBIAS is set to 9.0 V
- */
-enum adau1977_micbias {
- ADAU1977_MICBIAS_5V0 = 0x0,
- ADAU1977_MICBIAS_5V5 = 0x1,
- ADAU1977_MICBIAS_6V0 = 0x2,
- ADAU1977_MICBIAS_6V5 = 0x3,
- ADAU1977_MICBIAS_7V0 = 0x4,
- ADAU1977_MICBIAS_7V5 = 0x5,
- ADAU1977_MICBIAS_8V0 = 0x6,
- ADAU1977_MICBIAS_8V5 = 0x7,
- ADAU1977_MICBIAS_9V0 = 0x8,
-};
-
-/**
- * struct adau1977_platform_data - Platform configuration data for the ADAU1977
- * @micbias: Specifies the voltage for the MICBIAS pin
- */
-struct adau1977_platform_data {
- enum adau1977_micbias micbias;
-};
-
-#endif
diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
index 1fcfe9e63cb9..a3a9a878415f 100644
--- a/include/linux/platform_data/cros_ec_commands.h
+++ b/include/linux/platform_data/cros_ec_commands.h
@@ -1419,7 +1419,7 @@ struct ec_response_flash_info_2 {
uint16_t num_banks_total;
/* Number of banks described in banks array. */
uint16_t num_banks_desc;
- struct ec_flash_bank banks[0];
+ struct ec_flash_bank banks[];
} __ec_align4;
/*
@@ -2420,12 +2420,12 @@ struct ec_response_motion_sense_fifo_info {
/* Total amount of vector lost */
uint16_t total_lost;
/* Lost events since the last fifo_info, per sensors */
- uint16_t lost[0];
+ uint16_t lost[];
} __ec_todo_packed;
struct ec_response_motion_sense_fifo_data {
uint32_t number_data;
- struct ec_response_motion_sensor_data data[0];
+ struct ec_response_motion_sensor_data data[];
} __ec_todo_packed;
/* List supported activity recognition */
@@ -3093,7 +3093,7 @@ struct ec_response_tmp006_get_calibration_v1 {
uint8_t algorithm;
uint8_t num_params;
uint8_t reserved[2];
- float val[0];
+ float val[];
} __ec_align4;
struct ec_params_tmp006_set_calibration_v1 {
@@ -3101,7 +3101,7 @@ struct ec_params_tmp006_set_calibration_v1 {
uint8_t algorithm;
uint8_t num_params;
uint8_t reserved;
- float val[0];
+ float val[];
} __ec_align4;
@@ -5076,7 +5076,7 @@ struct ec_response_pd_log {
uint8_t type; /* event type : see PD_EVENT_xx below */
uint8_t size_port; /* [7:5] port number [4:0] payload size in bytes */
uint16_t data; /* type-defined data payload */
- uint8_t payload[0]; /* optional additional data payload: 0..16 bytes */
+ uint8_t payload[]; /* optional additional data payload: 0..16 bytes */
} __ec_align4;
/* The timestamp is the microsecond counter shifted to get about a ms. */
@@ -5789,7 +5789,7 @@ struct ec_response_fp_encryption_status {
struct ec_response_tp_frame_info {
uint32_t n_frames;
- uint32_t frame_sizes[0];
+ uint32_t frame_sizes[];
} __ec_align4;
/* Create a snapshot of current frame readings */
diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h
index 4a415ae851ef..02599687770c 100644
--- a/include/linux/platform_data/cros_ec_proto.h
+++ b/include/linux/platform_data/cros_ec_proto.h
@@ -69,7 +69,7 @@ struct cros_ec_command {
uint32_t outsize;
uint32_t insize;
uint32_t result;
- uint8_t data[0];
+ uint8_t data[];
};
/**
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 18b02dcc168e..4b708f4e8eed 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -54,11 +54,10 @@ extern u64 pm_runtime_autosuspend_expiration(struct device *dev);
extern void pm_runtime_update_max_time_suspended(struct device *dev,
s64 delta_ns);
extern void pm_runtime_set_memalloc_noio(struct device *dev, bool enable);
-extern void pm_runtime_clean_up_links(struct device *dev);
extern void pm_runtime_get_suppliers(struct device *dev);
extern void pm_runtime_put_suppliers(struct device *dev);
extern void pm_runtime_new_link(struct device *dev);
-extern void pm_runtime_drop_link(struct device *dev);
+extern void pm_runtime_drop_link(struct device_link *link);
/**
* pm_runtime_get_if_in_use - Conditionally bump up runtime PM usage counter.
@@ -276,11 +275,10 @@ static inline u64 pm_runtime_autosuspend_expiration(
struct device *dev) { return 0; }
static inline void pm_runtime_set_memalloc_noio(struct device *dev,
bool enable){}
-static inline void pm_runtime_clean_up_links(struct device *dev) {}
static inline void pm_runtime_get_suppliers(struct device *dev) {}
static inline void pm_runtime_put_suppliers(struct device *dev) {}
static inline void pm_runtime_new_link(struct device *dev) {}
-static inline void pm_runtime_drop_link(struct device *dev) {}
+static inline void pm_runtime_drop_link(struct device_link *link) {}
#endif /* !CONFIG_PM */
diff --git a/include/linux/refcount.h b/include/linux/refcount.h
index 7fabb1af18e0..497990c69b0b 100644
--- a/include/linux/refcount.h
+++ b/include/linux/refcount.h
@@ -147,24 +147,6 @@ static inline unsigned int refcount_read(const refcount_t *r)
return atomic_read(&r->refs);
}
-/**
- * refcount_add_not_zero - add a value to a refcount unless it is 0
- * @i: the value to add to the refcount
- * @r: the refcount
- *
- * Will saturate at REFCOUNT_SATURATED and WARN.
- *
- * Provides no memory ordering, it is assumed the caller has guaranteed the
- * object memory to be stable (RCU, etc.). It does provide a control dependency
- * and thereby orders future stores. See the comment on top.
- *
- * Use of this function is not recommended for the normal reference counting
- * use case in which references are taken and released one at a time. In these
- * cases, refcount_inc(), or one of its variants, should instead be used to
- * increment a reference count.
- *
- * Return: false if the passed refcount is 0, true otherwise
- */
static inline __must_check bool __refcount_add_not_zero(int i, refcount_t *r, int *oldp)
{
int old = refcount_read(r);
@@ -183,17 +165,12 @@ static inline __must_check bool __refcount_add_not_zero(int i, refcount_t *r, in
return old;
}
-static inline __must_check bool refcount_add_not_zero(int i, refcount_t *r)
-{
- return __refcount_add_not_zero(i, r, NULL);
-}
-
/**
- * refcount_add - add a value to a refcount
+ * refcount_add_not_zero - add a value to a refcount unless it is 0
* @i: the value to add to the refcount
* @r: the refcount
*
- * Similar to atomic_add(), but will saturate at REFCOUNT_SATURATED and WARN.
+ * Will saturate at REFCOUNT_SATURATED and WARN.
*
* Provides no memory ordering, it is assumed the caller has guaranteed the
* object memory to be stable (RCU, etc.). It does provide a control dependency
@@ -203,7 +180,14 @@ static inline __must_check bool refcount_add_not_zero(int i, refcount_t *r)
* use case in which references are taken and released one at a time. In these
* cases, refcount_inc(), or one of its variants, should instead be used to
* increment a reference count.
+ *
+ * Return: false if the passed refcount is 0, true otherwise
*/
+static inline __must_check bool refcount_add_not_zero(int i, refcount_t *r)
+{
+ return __refcount_add_not_zero(i, r, NULL);
+}
+
static inline void __refcount_add(int i, refcount_t *r, int *oldp)
{
int old = atomic_fetch_add_relaxed(i, &r->refs);
@@ -217,11 +201,32 @@ static inline void __refcount_add(int i, refcount_t *r, int *oldp)
refcount_warn_saturate(r, REFCOUNT_ADD_OVF);
}
+/**
+ * refcount_add - add a value to a refcount
+ * @i: the value to add to the refcount
+ * @r: the refcount
+ *
+ * Similar to atomic_add(), but will saturate at REFCOUNT_SATURATED and WARN.
+ *
+ * Provides no memory ordering, it is assumed the caller has guaranteed the
+ * object memory to be stable (RCU, etc.). It does provide a control dependency
+ * and thereby orders future stores. See the comment on top.
+ *
+ * Use of this function is not recommended for the normal reference counting
+ * use case in which references are taken and released one at a time. In these
+ * cases, refcount_inc(), or one of its variants, should instead be used to
+ * increment a reference count.
+ */
static inline void refcount_add(int i, refcount_t *r)
{
__refcount_add(i, r, NULL);
}
+static inline __must_check bool __refcount_inc_not_zero(refcount_t *r, int *oldp)
+{
+ return __refcount_add_not_zero(1, r, oldp);
+}
+
/**
* refcount_inc_not_zero - increment a refcount unless it is 0
* @r: the refcount to increment
@@ -235,14 +240,14 @@ static inline void refcount_add(int i, refcount_t *r)
*
* Return: true if the increment was successful, false otherwise
*/
-static inline __must_check bool __refcount_inc_not_zero(refcount_t *r, int *oldp)
+static inline __must_check bool refcount_inc_not_zero(refcount_t *r)
{
- return __refcount_add_not_zero(1, r, oldp);
+ return __refcount_inc_not_zero(r, NULL);
}
-static inline __must_check bool refcount_inc_not_zero(refcount_t *r)
+static inline void __refcount_inc(refcount_t *r, int *oldp)
{
- return __refcount_inc_not_zero(r, NULL);
+ __refcount_add(1, r, oldp);
}
/**
@@ -257,14 +262,27 @@ static inline __must_check bool refcount_inc_not_zero(refcount_t *r)
* Will WARN if the refcount is 0, as this represents a possible use-after-free
* condition.
*/
-static inline void __refcount_inc(refcount_t *r, int *oldp)
+static inline void refcount_inc(refcount_t *r)
{
- __refcount_add(1, r, oldp);
+ __refcount_inc(r, NULL);
}
-static inline void refcount_inc(refcount_t *r)
+static inline __must_check bool __refcount_sub_and_test(int i, refcount_t *r, int *oldp)
{
- __refcount_inc(r, NULL);
+ int old = atomic_fetch_sub_release(i, &r->refs);
+
+ if (oldp)
+ *oldp = old;
+
+ if (old == i) {
+ smp_acquire__after_ctrl_dep();
+ return true;
+ }
+
+ if (unlikely(old < 0 || old - i < 0))
+ refcount_warn_saturate(r, REFCOUNT_SUB_UAF);
+
+ return false;
}
/**
@@ -287,27 +305,14 @@ static inline void refcount_inc(refcount_t *r)
*
* Return: true if the resulting refcount is 0, false otherwise
*/
-static inline __must_check bool __refcount_sub_and_test(int i, refcount_t *r, int *oldp)
+static inline __must_check bool refcount_sub_and_test(int i, refcount_t *r)
{
- int old = atomic_fetch_sub_release(i, &r->refs);
-
- if (oldp)
- *oldp = old;
-
- if (old == i) {
- smp_acquire__after_ctrl_dep();
- return true;
- }
-
- if (unlikely(old < 0 || old - i < 0))
- refcount_warn_saturate(r, REFCOUNT_SUB_UAF);
-
- return false;
+ return __refcount_sub_and_test(i, r, NULL);
}
-static inline __must_check bool refcount_sub_and_test(int i, refcount_t *r)
+static inline __must_check bool __refcount_dec_and_test(refcount_t *r, int *oldp)
{
- return __refcount_sub_and_test(i, r, NULL);
+ return __refcount_sub_and_test(1, r, oldp);
}
/**
@@ -323,26 +328,11 @@ static inline __must_check bool refcount_sub_and_test(int i, refcount_t *r)
*
* Return: true if the resulting refcount is 0, false otherwise
*/
-static inline __must_check bool __refcount_dec_and_test(refcount_t *r, int *oldp)
-{
- return __refcount_sub_and_test(1, r, oldp);
-}
-
static inline __must_check bool refcount_dec_and_test(refcount_t *r)
{
return __refcount_dec_and_test(r, NULL);
}
-/**
- * refcount_dec - decrement a refcount
- * @r: the refcount
- *
- * Similar to atomic_dec(), it will WARN on underflow and fail to decrement
- * when saturated at REFCOUNT_SATURATED.
- *
- * Provides release memory ordering, such that prior loads and stores are done
- * before.
- */
static inline void __refcount_dec(refcount_t *r, int *oldp)
{
int old = atomic_fetch_sub_release(1, &r->refs);
@@ -354,6 +344,16 @@ static inline void __refcount_dec(refcount_t *r, int *oldp)
refcount_warn_saturate(r, REFCOUNT_DEC_LEAK);
}
+/**
+ * refcount_dec - decrement a refcount
+ * @r: the refcount
+ *
+ * Similar to atomic_dec(), it will WARN on underflow and fail to decrement
+ * when saturated at REFCOUNT_SATURATED.
+ *
+ * Provides release memory ordering, such that prior loads and stores are done
+ * before.
+ */
static inline void refcount_dec(refcount_t *r)
{
__refcount_dec(r, NULL);
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index e7834d98207f..a652d1474d6a 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -570,6 +570,10 @@ struct regmap *__regmap_init_sdw(struct sdw_slave *sdw,
const struct regmap_config *config,
struct lock_class_key *lock_key,
const char *lock_name);
+struct regmap *__regmap_init_sdw_mbq(struct sdw_slave *sdw,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name);
struct regmap *__regmap_init_spi_avmm(struct spi_device *spi,
const struct regmap_config *config,
struct lock_class_key *lock_key,
@@ -619,6 +623,10 @@ struct regmap *__devm_regmap_init_sdw(struct sdw_slave *sdw,
const struct regmap_config *config,
struct lock_class_key *lock_key,
const char *lock_name);
+struct regmap *__devm_regmap_init_sdw_mbq(struct sdw_slave *sdw,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name);
struct regmap *__devm_regmap_init_slimbus(struct slim_device *slimbus,
const struct regmap_config *config,
struct lock_class_key *lock_key,
@@ -818,6 +826,19 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
sdw, config)
/**
+ * regmap_init_sdw_mbq() - Initialise register map
+ *
+ * @sdw: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+#define regmap_init_sdw_mbq(sdw, config) \
+ __regmap_lockdep_wrapper(__regmap_init_sdw_mbq, #config, \
+ sdw, config)
+
+/**
* regmap_init_spi_avmm() - Initialize register map for Intel SPI Slave
* to AVMM Bus Bridge
*
@@ -990,6 +1011,20 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
sdw, config)
/**
+ * devm_regmap_init_sdw_mbq() - Initialise managed register map
+ *
+ * @sdw: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap. The regmap will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_sdw_mbq(sdw, config) \
+ __regmap_lockdep_wrapper(__devm_regmap_init_sdw_mbq, #config, \
+ sdw, config)
+
+/**
* devm_regmap_init_slimbus() - Initialise managed register map
*
* @slimbus: Device that will be interacted with
diff --git a/include/linux/scif.h b/include/linux/scif.h
deleted file mode 100644
index 329e695b8fe5..000000000000
--- a/include/linux/scif.h
+++ /dev/null
@@ -1,1339 +0,0 @@
-/*
- * Intel MIC Platform Software Stack (MPSS)
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2014 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2014 Intel Corporation.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Intel SCIF driver.
- *
- */
-#ifndef __SCIF_H__
-#define __SCIF_H__
-
-#include <linux/types.h>
-#include <linux/poll.h>
-#include <linux/device.h>
-#include <linux/scif_ioctl.h>
-
-#define SCIF_ACCEPT_SYNC 1
-#define SCIF_SEND_BLOCK 1
-#define SCIF_RECV_BLOCK 1
-
-enum {
- SCIF_PROT_READ = (1 << 0),
- SCIF_PROT_WRITE = (1 << 1)
-};
-
-enum {
- SCIF_MAP_FIXED = 0x10,
- SCIF_MAP_KERNEL = 0x20,
-};
-
-enum {
- SCIF_FENCE_INIT_SELF = (1 << 0),
- SCIF_FENCE_INIT_PEER = (1 << 1),
- SCIF_SIGNAL_LOCAL = (1 << 4),
- SCIF_SIGNAL_REMOTE = (1 << 5)
-};
-
-enum {
- SCIF_RMA_USECPU = (1 << 0),
- SCIF_RMA_USECACHE = (1 << 1),
- SCIF_RMA_SYNC = (1 << 2),
- SCIF_RMA_ORDERED = (1 << 3)
-};
-
-/* End of SCIF Admin Reserved Ports */
-#define SCIF_ADMIN_PORT_END 1024
-
-/* End of SCIF Reserved Ports */
-#define SCIF_PORT_RSVD 1088
-
-typedef struct scif_endpt *scif_epd_t;
-typedef struct scif_pinned_pages *scif_pinned_pages_t;
-
-/**
- * struct scif_range - SCIF registered range used in kernel mode
- * @cookie: cookie used internally by SCIF
- * @nr_pages: number of pages of PAGE_SIZE
- * @prot_flags: R/W protection
- * @phys_addr: Array of bus addresses
- * @va: Array of kernel virtual addresses backed by the pages in the phys_addr
- * array. The va is populated only when called on the host for a remote
- * SCIF connection on MIC. This is required to support the use case of DMA
- * between MIC and another device which is not a SCIF node e.g., an IB or
- * ethernet NIC.
- */
-struct scif_range {
- void *cookie;
- int nr_pages;
- int prot_flags;
- dma_addr_t *phys_addr;
- void __iomem **va;
-};
-
-/**
- * struct scif_pollepd - SCIF endpoint to be monitored via scif_poll
- * @epd: SCIF endpoint
- * @events: requested events
- * @revents: returned events
- */
-struct scif_pollepd {
- scif_epd_t epd;
- __poll_t events;
- __poll_t revents;
-};
-
-/**
- * scif_peer_dev - representation of a peer SCIF device
- *
- * Peer devices show up as PCIe devices for the mgmt node but not the cards.
- * The mgmt node discovers all the cards on the PCIe bus and informs the other
- * cards about their peers. Upon notification of a peer a node adds a peer
- * device to the peer bus to maintain symmetry in the way devices are
- * discovered across all nodes in the SCIF network.
- *
- * @dev: underlying device
- * @dnode - The destination node which this device will communicate with.
- */
-struct scif_peer_dev {
- struct device dev;
- u8 dnode;
-};
-
-/**
- * scif_client - representation of a SCIF client
- * @name: client name
- * @probe - client method called when a peer device is registered
- * @remove - client method called when a peer device is unregistered
- * @si - subsys_interface used internally for implementing SCIF clients
- */
-struct scif_client {
- const char *name;
- void (*probe)(struct scif_peer_dev *spdev);
- void (*remove)(struct scif_peer_dev *spdev);
- struct subsys_interface si;
-};
-
-#define SCIF_OPEN_FAILED ((scif_epd_t)-1)
-#define SCIF_REGISTER_FAILED ((off_t)-1)
-#define SCIF_MMAP_FAILED ((void *)-1)
-
-/**
- * scif_open() - Create an endpoint
- *
- * Return:
- * Upon successful completion, scif_open() returns an endpoint descriptor to
- * be used in subsequent SCIF functions calls to refer to that endpoint;
- * otherwise in user mode SCIF_OPEN_FAILED (that is ((scif_epd_t)-1)) is
- * returned and errno is set to indicate the error; in kernel mode a NULL
- * scif_epd_t is returned.
- *
- * Errors:
- * ENOMEM - Insufficient kernel memory was available
- */
-scif_epd_t scif_open(void);
-
-/**
- * scif_bind() - Bind an endpoint to a port
- * @epd: endpoint descriptor
- * @pn: port number
- *
- * scif_bind() binds endpoint epd to port pn, where pn is a port number on the
- * local node. If pn is zero, a port number greater than or equal to
- * SCIF_PORT_RSVD is assigned and returned. Each endpoint may be bound to
- * exactly one local port. Ports less than 1024 when requested can only be bound
- * by system (or root) processes or by processes executed by privileged users.
- *
- * Return:
- * Upon successful completion, scif_bind() returns the port number to which epd
- * is bound; otherwise in user mode -1 is returned and errno is set to
- * indicate the error; in kernel mode the negative of one of the following
- * errors is returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * EINVAL - the endpoint or the port is already bound
- * EISCONN - The endpoint is already connected
- * ENOSPC - No port number available for assignment
- * EACCES - The port requested is protected and the user is not the superuser
- */
-int scif_bind(scif_epd_t epd, u16 pn);
-
-/**
- * scif_listen() - Listen for connections on an endpoint
- * @epd: endpoint descriptor
- * @backlog: maximum pending connection requests
- *
- * scif_listen() marks the endpoint epd as a listening endpoint - that is, as
- * an endpoint that will be used to accept incoming connection requests. Once
- * so marked, the endpoint is said to be in the listening state and may not be
- * used as the endpoint of a connection.
- *
- * The endpoint, epd, must have been bound to a port.
- *
- * The backlog argument defines the maximum length to which the queue of
- * pending connections for epd may grow. If a connection request arrives when
- * the queue is full, the client may receive an error with an indication that
- * the connection was refused.
- *
- * Return:
- * Upon successful completion, scif_listen() returns 0; otherwise in user mode
- * -1 is returned and errno is set to indicate the error; in kernel mode the
- * negative of one of the following errors is returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * EINVAL - the endpoint is not bound to a port
- * EISCONN - The endpoint is already connected or listening
- */
-int scif_listen(scif_epd_t epd, int backlog);
-
-/**
- * scif_connect() - Initiate a connection on a port
- * @epd: endpoint descriptor
- * @dst: global id of port to which to connect
- *
- * The scif_connect() function requests the connection of endpoint epd to remote
- * port dst. If the connection is successful, a peer endpoint, bound to dst, is
- * created on node dst.node. On successful return, the connection is complete.
- *
- * If the endpoint epd has not already been bound to a port, scif_connect()
- * will bind it to an unused local port.
- *
- * A connection is terminated when an endpoint of the connection is closed,
- * either explicitly by scif_close(), or when a process that owns one of the
- * endpoints of the connection is terminated.
- *
- * In user space, scif_connect() supports an asynchronous connection mode
- * if the application has set the O_NONBLOCK flag on the endpoint via the
- * fcntl() system call. Setting this flag will result in the calling process
- * not to wait during scif_connect().
- *
- * Return:
- * Upon successful completion, scif_connect() returns the port ID to which the
- * endpoint, epd, is bound; otherwise in user mode -1 is returned and errno is
- * set to indicate the error; in kernel mode the negative of one of the
- * following errors is returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNREFUSED - The destination was not listening for connections or refused
- * the connection request
- * EINVAL - dst.port is not a valid port ID
- * EISCONN - The endpoint is already connected
- * ENOMEM - No buffer space is available
- * ENODEV - The destination node does not exist, or the node is lost or existed,
- * but is not currently in the network since it may have crashed
- * ENOSPC - No port number available for assignment
- * EOPNOTSUPP - The endpoint is listening and cannot be connected
- */
-int scif_connect(scif_epd_t epd, struct scif_port_id *dst);
-
-/**
- * scif_accept() - Accept a connection on an endpoint
- * @epd: endpoint descriptor
- * @peer: global id of port to which connected
- * @newepd: new connected endpoint descriptor
- * @flags: flags
- *
- * The scif_accept() call extracts the first connection request from the queue
- * of pending connections for the port on which epd is listening. scif_accept()
- * creates a new endpoint, bound to the same port as epd, and allocates a new
- * SCIF endpoint descriptor, returned in newepd, for the endpoint. The new
- * endpoint is connected to the endpoint through which the connection was
- * requested. epd is unaffected by this call, and remains in the listening
- * state.
- *
- * On successful return, peer holds the global port identifier (node id and
- * local port number) of the port which requested the connection.
- *
- * A connection is terminated when an endpoint of the connection is closed,
- * either explicitly by scif_close(), or when a process that owns one of the
- * endpoints of the connection is terminated.
- *
- * The number of connections that can (subsequently) be accepted on epd is only
- * limited by system resources (memory).
- *
- * The flags argument is formed by OR'ing together zero or more of the
- * following values.
- * SCIF_ACCEPT_SYNC - block until a connection request is presented. If
- * SCIF_ACCEPT_SYNC is not in flags, and no pending
- * connections are present on the queue, scif_accept()
- * fails with an EAGAIN error
- *
- * In user mode, the select() and poll() functions can be used to determine
- * when there is a connection request. In kernel mode, the scif_poll()
- * function may be used for this purpose. A readable event will be delivered
- * when a connection is requested.
- *
- * Return:
- * Upon successful completion, scif_accept() returns 0; otherwise in user mode
- * -1 is returned and errno is set to indicate the error; in kernel mode the
- * negative of one of the following errors is returned.
- *
- * Errors:
- * EAGAIN - SCIF_ACCEPT_SYNC is not set and no connections are present to be
- * accepted or SCIF_ACCEPT_SYNC is not set and remote node failed to complete
- * its connection request
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * EINTR - Interrupted function
- * EINVAL - epd is not a listening endpoint, or flags is invalid, or peer is
- * NULL, or newepd is NULL
- * ENODEV - The requesting node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOMEM - Not enough space
- * ENOENT - Secondary part of epd registration failed
- */
-int scif_accept(scif_epd_t epd, struct scif_port_id *peer, scif_epd_t
- *newepd, int flags);
-
-/**
- * scif_close() - Close an endpoint
- * @epd: endpoint descriptor
- *
- * scif_close() closes an endpoint and performs necessary teardown of
- * facilities associated with that endpoint.
- *
- * If epd is a listening endpoint then it will no longer accept connection
- * requests on the port to which it is bound. Any pending connection requests
- * are rejected.
- *
- * If epd is a connected endpoint, then its peer endpoint is also closed. RMAs
- * which are in-process through epd or its peer endpoint will complete before
- * scif_close() returns. Registered windows of the local and peer endpoints are
- * released as if scif_unregister() was called against each window.
- *
- * Closing a SCIF endpoint does not affect local registered memory mapped by
- * a SCIF endpoint on a remote node. The local memory remains mapped by the peer
- * SCIF endpoint explicitly removed by calling munmap(..) by the peer.
- *
- * If the peer endpoint's receive queue is not empty at the time that epd is
- * closed, then the peer endpoint can be passed as the endpoint parameter to
- * scif_recv() until the receive queue is empty.
- *
- * epd is freed and may no longer be accessed.
- *
- * Return:
- * Upon successful completion, scif_close() returns 0; otherwise in user mode
- * -1 is returned and errno is set to indicate the error; in kernel mode the
- * negative of one of the following errors is returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- */
-int scif_close(scif_epd_t epd);
-
-/**
- * scif_send() - Send a message
- * @epd: endpoint descriptor
- * @msg: message buffer address
- * @len: message length
- * @flags: blocking mode flags
- *
- * scif_send() sends data to the peer of endpoint epd. Up to len bytes of data
- * are copied from memory starting at address msg. On successful execution the
- * return value of scif_send() is the number of bytes that were sent, and is
- * zero if no bytes were sent because len was zero. scif_send() may be called
- * only when the endpoint is in a connected state.
- *
- * If a scif_send() call is non-blocking, then it sends only those bytes which
- * can be sent without waiting, up to a maximum of len bytes.
- *
- * If a scif_send() call is blocking, then it normally returns after sending
- * all len bytes. If a blocking call is interrupted or the connection is
- * reset, the call is considered successful if some bytes were sent or len is
- * zero, otherwise the call is considered unsuccessful.
- *
- * In user mode, the select() and poll() functions can be used to determine
- * when the send queue is not full. In kernel mode, the scif_poll() function
- * may be used for this purpose.
- *
- * It is recommended that scif_send()/scif_recv() only be used for short
- * control-type message communication between SCIF endpoints. The SCIF RMA
- * APIs are expected to provide better performance for transfer sizes of
- * 1024 bytes or longer for the current MIC hardware and software
- * implementation.
- *
- * scif_send() will block until the entire message is sent if SCIF_SEND_BLOCK
- * is passed as the flags argument.
- *
- * Return:
- * Upon successful completion, scif_send() returns the number of bytes sent;
- * otherwise in user mode -1 is returned and errno is set to indicate the
- * error; in kernel mode the negative of one of the following errors is
- * returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - flags is invalid, or len is negative
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOMEM - Not enough space
- * ENOTCONN - The endpoint is not connected
- */
-int scif_send(scif_epd_t epd, void *msg, int len, int flags);
-
-/**
- * scif_recv() - Receive a message
- * @epd: endpoint descriptor
- * @msg: message buffer address
- * @len: message buffer length
- * @flags: blocking mode flags
- *
- * scif_recv() receives data from the peer of endpoint epd. Up to len bytes of
- * data are copied to memory starting at address msg. On successful execution
- * the return value of scif_recv() is the number of bytes that were received,
- * and is zero if no bytes were received because len was zero. scif_recv() may
- * be called only when the endpoint is in a connected state.
- *
- * If a scif_recv() call is non-blocking, then it receives only those bytes
- * which can be received without waiting, up to a maximum of len bytes.
- *
- * If a scif_recv() call is blocking, then it normally returns after receiving
- * all len bytes. If the blocking call was interrupted due to a disconnection,
- * subsequent calls to scif_recv() will copy all bytes received upto the point
- * of disconnection.
- *
- * In user mode, the select() and poll() functions can be used to determine
- * when data is available to be received. In kernel mode, the scif_poll()
- * function may be used for this purpose.
- *
- * It is recommended that scif_send()/scif_recv() only be used for short
- * control-type message communication between SCIF endpoints. The SCIF RMA
- * APIs are expected to provide better performance for transfer sizes of
- * 1024 bytes or longer for the current MIC hardware and software
- * implementation.
- *
- * scif_recv() will block until the entire message is received if
- * SCIF_RECV_BLOCK is passed as the flags argument.
- *
- * Return:
- * Upon successful completion, scif_recv() returns the number of bytes
- * received; otherwise in user mode -1 is returned and errno is set to
- * indicate the error; in kernel mode the negative of one of the following
- * errors is returned.
- *
- * Errors:
- * EAGAIN - The destination node is returning from a low power state
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - flags is invalid, or len is negative
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOMEM - Not enough space
- * ENOTCONN - The endpoint is not connected
- */
-int scif_recv(scif_epd_t epd, void *msg, int len, int flags);
-
-/**
- * scif_register() - Mark a memory region for remote access.
- * @epd: endpoint descriptor
- * @addr: starting virtual address
- * @len: length of range
- * @offset: offset of window
- * @prot_flags: read/write protection flags
- * @map_flags: mapping flags
- *
- * The scif_register() function opens a window, a range of whole pages of the
- * registered address space of the endpoint epd, starting at offset po and
- * continuing for len bytes. The value of po, further described below, is a
- * function of the parameters offset and len, and the value of map_flags. Each
- * page of the window represents the physical memory page which backs the
- * corresponding page of the range of virtual address pages starting at addr
- * and continuing for len bytes. addr and len are constrained to be multiples
- * of the page size. A successful scif_register() call returns po.
- *
- * When SCIF_MAP_FIXED is set in the map_flags argument, po will be offset
- * exactly, and offset is constrained to be a multiple of the page size. The
- * mapping established by scif_register() will not replace any existing
- * registration; an error is returned if any page within the range [offset,
- * offset + len - 1] intersects an existing window.
- *
- * When SCIF_MAP_FIXED is not set, the implementation uses offset in an
- * implementation-defined manner to arrive at po. The po value so chosen will
- * be an area of the registered address space that the implementation deems
- * suitable for a mapping of len bytes. An offset value of 0 is interpreted as
- * granting the implementation complete freedom in selecting po, subject to
- * constraints described below. A non-zero value of offset is taken to be a
- * suggestion of an offset near which the mapping should be placed. When the
- * implementation selects a value for po, it does not replace any extant
- * window. In all cases, po will be a multiple of the page size.
- *
- * The physical pages which are so represented by a window are available for
- * access in calls to mmap(), scif_readfrom(), scif_writeto(),
- * scif_vreadfrom(), and scif_vwriteto(). While a window is registered, the
- * physical pages represented by the window will not be reused by the memory
- * subsystem for any other purpose. Note that the same physical page may be
- * represented by multiple windows.
- *
- * Subsequent operations which change the memory pages to which virtual
- * addresses are mapped (such as mmap(), munmap()) have no effect on
- * existing window.
- *
- * If the process will fork(), it is recommended that the registered
- * virtual address range be marked with MADV_DONTFORK. Doing so will prevent
- * problems due to copy-on-write semantics.
- *
- * The prot_flags argument is formed by OR'ing together one or more of the
- * following values.
- * SCIF_PROT_READ - allow read operations from the window
- * SCIF_PROT_WRITE - allow write operations to the window
- *
- * Return:
- * Upon successful completion, scif_register() returns the offset at which the
- * mapping was placed (po); otherwise in user mode SCIF_REGISTER_FAILED (that
- * is (off_t *)-1) is returned and errno is set to indicate the error; in
- * kernel mode the negative of one of the following errors is returned.
- *
- * Errors:
- * EADDRINUSE - SCIF_MAP_FIXED is set in map_flags, and pages in the range
- * [offset, offset + len -1] are already registered
- * EAGAIN - The mapping could not be performed due to lack of resources
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - map_flags is invalid, or prot_flags is invalid, or SCIF_MAP_FIXED is
- * set in flags, and offset is not a multiple of the page size, or addr is not a
- * multiple of the page size, or len is not a multiple of the page size, or is
- * 0, or offset is negative
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOMEM - Not enough space
- * ENOTCONN -The endpoint is not connected
- */
-off_t scif_register(scif_epd_t epd, void *addr, size_t len, off_t offset,
- int prot_flags, int map_flags);
-
-/**
- * scif_unregister() - Mark a memory region for remote access.
- * @epd: endpoint descriptor
- * @offset: start of range to unregister
- * @len: length of range to unregister
- *
- * The scif_unregister() function closes those previously registered windows
- * which are entirely within the range [offset, offset + len - 1]. It is an
- * error to specify a range which intersects only a subrange of a window.
- *
- * On a successful return, pages within the window may no longer be specified
- * in calls to mmap(), scif_readfrom(), scif_writeto(), scif_vreadfrom(),
- * scif_vwriteto(), scif_get_pages, and scif_fence_signal(). The window,
- * however, continues to exist until all previous references against it are
- * removed. A window is referenced if there is a mapping to it created by
- * mmap(), or if scif_get_pages() was called against the window
- * (and the pages have not been returned via scif_put_pages()). A window is
- * also referenced while an RMA, in which some range of the window is a source
- * or destination, is in progress. Finally a window is referenced while some
- * offset in that window was specified to scif_fence_signal(), and the RMAs
- * marked by that call to scif_fence_signal() have not completed. While a
- * window is in this state, its registered address space pages are not
- * available for use in a new registered window.
- *
- * When all such references to the window have been removed, its references to
- * all the physical pages which it represents are removed. Similarly, the
- * registered address space pages of the window become available for
- * registration in a new window.
- *
- * Return:
- * Upon successful completion, scif_unregister() returns 0; otherwise in user
- * mode -1 is returned and errno is set to indicate the error; in kernel mode
- * the negative of one of the following errors is returned. In the event of an
- * error, no windows are unregistered.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - the range [offset, offset + len - 1] intersects a subrange of a
- * window, or offset is negative
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENXIO - Offsets in the range [offset, offset + len - 1] are invalid for the
- * registered address space of epd
- */
-int scif_unregister(scif_epd_t epd, off_t offset, size_t len);
-
-/**
- * scif_readfrom() - Copy from a remote address space
- * @epd: endpoint descriptor
- * @loffset: offset in local registered address space to
- * which to copy
- * @len: length of range to copy
- * @roffset: offset in remote registered address space
- * from which to copy
- * @rma_flags: transfer mode flags
- *
- * scif_readfrom() copies len bytes from the remote registered address space of
- * the peer of endpoint epd, starting at the offset roffset to the local
- * registered address space of epd, starting at the offset loffset.
- *
- * Each of the specified ranges [loffset, loffset + len - 1] and [roffset,
- * roffset + len - 1] must be within some registered window or windows of the
- * local and remote nodes. A range may intersect multiple registered windows,
- * but only if those windows are contiguous in the registered address space.
- *
- * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using
- * programmed read/writes. Otherwise the data is copied using DMA. If rma_-
- * flags includes SCIF_RMA_SYNC, then scif_readfrom() will return after the
- * transfer is complete. Otherwise, the transfer may be performed asynchron-
- * ously. The order in which any two asynchronous RMA operations complete
- * is non-deterministic. The synchronization functions, scif_fence_mark()/
- * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to
- * the completion of asynchronous RMA operations on the same endpoint.
- *
- * The DMA transfer of individual bytes is not guaranteed to complete in
- * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last
- * cacheline or partial cacheline of the source range will become visible on
- * the destination node after all other transferred data in the source
- * range has become visible on the destination node.
- *
- * The optimal DMA performance will likely be realized if both
- * loffset and roffset are cacheline aligned (are a multiple of 64). Lower
- * performance will likely be realized if loffset and roffset are not
- * cacheline aligned but are separated by some multiple of 64. The lowest level
- * of performance is likely if loffset and roffset are not separated by a
- * multiple of 64.
- *
- * The rma_flags argument is formed by ORing together zero or more of the
- * following values.
- * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA
- * engine.
- * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the
- * transfer has completed. Passing this flag results in the
- * current implementation busy waiting and consuming CPU cycles
- * while the DMA transfer is in progress for best performance by
- * avoiding the interrupt latency.
- * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of
- * the source range becomes visible on the destination node
- * after all other transferred data in the source range has
- * become visible on the destination
- *
- * Return:
- * Upon successful completion, scif_readfrom() returns 0; otherwise in user
- * mode -1 is returned and errno is set to indicate the error; in kernel mode
- * the negative of one of the following errors is returned.
- *
- * Errors:
- * EACCES - Attempt to write to a read-only range
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - rma_flags is invalid
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENXIO - The range [loffset, loffset + len - 1] is invalid for the registered
- * address space of epd, or, The range [roffset, roffset + len - 1] is invalid
- * for the registered address space of the peer of epd, or loffset or roffset
- * is negative
- */
-int scif_readfrom(scif_epd_t epd, off_t loffset, size_t len, off_t
- roffset, int rma_flags);
-
-/**
- * scif_writeto() - Copy to a remote address space
- * @epd: endpoint descriptor
- * @loffset: offset in local registered address space
- * from which to copy
- * @len: length of range to copy
- * @roffset: offset in remote registered address space to
- * which to copy
- * @rma_flags: transfer mode flags
- *
- * scif_writeto() copies len bytes from the local registered address space of
- * epd, starting at the offset loffset to the remote registered address space
- * of the peer of endpoint epd, starting at the offset roffset.
- *
- * Each of the specified ranges [loffset, loffset + len - 1] and [roffset,
- * roffset + len - 1] must be within some registered window or windows of the
- * local and remote nodes. A range may intersect multiple registered windows,
- * but only if those windows are contiguous in the registered address space.
- *
- * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using
- * programmed read/writes. Otherwise the data is copied using DMA. If rma_-
- * flags includes SCIF_RMA_SYNC, then scif_writeto() will return after the
- * transfer is complete. Otherwise, the transfer may be performed asynchron-
- * ously. The order in which any two asynchronous RMA operations complete
- * is non-deterministic. The synchronization functions, scif_fence_mark()/
- * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to
- * the completion of asynchronous RMA operations on the same endpoint.
- *
- * The DMA transfer of individual bytes is not guaranteed to complete in
- * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last
- * cacheline or partial cacheline of the source range will become visible on
- * the destination node after all other transferred data in the source
- * range has become visible on the destination node.
- *
- * The optimal DMA performance will likely be realized if both
- * loffset and roffset are cacheline aligned (are a multiple of 64). Lower
- * performance will likely be realized if loffset and roffset are not cacheline
- * aligned but are separated by some multiple of 64. The lowest level of
- * performance is likely if loffset and roffset are not separated by a multiple
- * of 64.
- *
- * The rma_flags argument is formed by ORing together zero or more of the
- * following values.
- * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA
- * engine.
- * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the
- * transfer has completed. Passing this flag results in the
- * current implementation busy waiting and consuming CPU cycles
- * while the DMA transfer is in progress for best performance by
- * avoiding the interrupt latency.
- * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of
- * the source range becomes visible on the destination node
- * after all other transferred data in the source range has
- * become visible on the destination
- *
- * Return:
- * Upon successful completion, scif_readfrom() returns 0; otherwise in user
- * mode -1 is returned and errno is set to indicate the error; in kernel mode
- * the negative of one of the following errors is returned.
- *
- * Errors:
- * EACCES - Attempt to write to a read-only range
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - rma_flags is invalid
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENXIO - The range [loffset, loffset + len - 1] is invalid for the registered
- * address space of epd, or, The range [roffset , roffset + len -1] is invalid
- * for the registered address space of the peer of epd, or loffset or roffset
- * is negative
- */
-int scif_writeto(scif_epd_t epd, off_t loffset, size_t len, off_t
- roffset, int rma_flags);
-
-/**
- * scif_vreadfrom() - Copy from a remote address space
- * @epd: endpoint descriptor
- * @addr: address to which to copy
- * @len: length of range to copy
- * @roffset: offset in remote registered address space
- * from which to copy
- * @rma_flags: transfer mode flags
- *
- * scif_vreadfrom() copies len bytes from the remote registered address
- * space of the peer of endpoint epd, starting at the offset roffset, to local
- * memory, starting at addr.
- *
- * The specified range [roffset, roffset + len - 1] must be within some
- * registered window or windows of the remote nodes. The range may
- * intersect multiple registered windows, but only if those windows are
- * contiguous in the registered address space.
- *
- * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using
- * programmed read/writes. Otherwise the data is copied using DMA. If rma_-
- * flags includes SCIF_RMA_SYNC, then scif_vreadfrom() will return after the
- * transfer is complete. Otherwise, the transfer may be performed asynchron-
- * ously. The order in which any two asynchronous RMA operations complete
- * is non-deterministic. The synchronization functions, scif_fence_mark()/
- * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to
- * the completion of asynchronous RMA operations on the same endpoint.
- *
- * The DMA transfer of individual bytes is not guaranteed to complete in
- * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last
- * cacheline or partial cacheline of the source range will become visible on
- * the destination node after all other transferred data in the source
- * range has become visible on the destination node.
- *
- * If rma_flags includes SCIF_RMA_USECACHE, then the physical pages which back
- * the specified local memory range may be remain in a pinned state even after
- * the specified transfer completes. This may reduce overhead if some or all of
- * the same virtual address range is referenced in a subsequent call of
- * scif_vreadfrom() or scif_vwriteto().
- *
- * The optimal DMA performance will likely be realized if both
- * addr and roffset are cacheline aligned (are a multiple of 64). Lower
- * performance will likely be realized if addr and roffset are not
- * cacheline aligned but are separated by some multiple of 64. The lowest level
- * of performance is likely if addr and roffset are not separated by a
- * multiple of 64.
- *
- * The rma_flags argument is formed by ORing together zero or more of the
- * following values.
- * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA
- * engine.
- * SCIF_RMA_USECACHE - enable registration caching
- * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the
- * transfer has completed. Passing this flag results in the
- * current implementation busy waiting and consuming CPU cycles
- * while the DMA transfer is in progress for best performance by
- * avoiding the interrupt latency.
- * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of
- * the source range becomes visible on the destination node
- * after all other transferred data in the source range has
- * become visible on the destination
- *
- * Return:
- * Upon successful completion, scif_vreadfrom() returns 0; otherwise in user
- * mode -1 is returned and errno is set to indicate the error; in kernel mode
- * the negative of one of the following errors is returned.
- *
- * Errors:
- * EACCES - Attempt to write to a read-only range
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - rma_flags is invalid
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENXIO - Offsets in the range [roffset, roffset + len - 1] are invalid for the
- * registered address space of epd
- */
-int scif_vreadfrom(scif_epd_t epd, void *addr, size_t len, off_t roffset,
- int rma_flags);
-
-/**
- * scif_vwriteto() - Copy to a remote address space
- * @epd: endpoint descriptor
- * @addr: address from which to copy
- * @len: length of range to copy
- * @roffset: offset in remote registered address space to
- * which to copy
- * @rma_flags: transfer mode flags
- *
- * scif_vwriteto() copies len bytes from the local memory, starting at addr, to
- * the remote registered address space of the peer of endpoint epd, starting at
- * the offset roffset.
- *
- * The specified range [roffset, roffset + len - 1] must be within some
- * registered window or windows of the remote nodes. The range may intersect
- * multiple registered windows, but only if those windows are contiguous in the
- * registered address space.
- *
- * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using
- * programmed read/writes. Otherwise the data is copied using DMA. If rma_-
- * flags includes SCIF_RMA_SYNC, then scif_vwriteto() will return after the
- * transfer is complete. Otherwise, the transfer may be performed asynchron-
- * ously. The order in which any two asynchronous RMA operations complete
- * is non-deterministic. The synchronization functions, scif_fence_mark()/
- * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to
- * the completion of asynchronous RMA operations on the same endpoint.
- *
- * The DMA transfer of individual bytes is not guaranteed to complete in
- * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last
- * cacheline or partial cacheline of the source range will become visible on
- * the destination node after all other transferred data in the source
- * range has become visible on the destination node.
- *
- * If rma_flags includes SCIF_RMA_USECACHE, then the physical pages which back
- * the specified local memory range may be remain in a pinned state even after
- * the specified transfer completes. This may reduce overhead if some or all of
- * the same virtual address range is referenced in a subsequent call of
- * scif_vreadfrom() or scif_vwriteto().
- *
- * The optimal DMA performance will likely be realized if both
- * addr and offset are cacheline aligned (are a multiple of 64). Lower
- * performance will likely be realized if addr and offset are not cacheline
- * aligned but are separated by some multiple of 64. The lowest level of
- * performance is likely if addr and offset are not separated by a multiple of
- * 64.
- *
- * The rma_flags argument is formed by ORing together zero or more of the
- * following values.
- * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA
- * engine.
- * SCIF_RMA_USECACHE - allow registration caching
- * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the
- * transfer has completed. Passing this flag results in the
- * current implementation busy waiting and consuming CPU cycles
- * while the DMA transfer is in progress for best performance by
- * avoiding the interrupt latency.
- * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of
- * the source range becomes visible on the destination node
- * after all other transferred data in the source range has
- * become visible on the destination
- *
- * Return:
- * Upon successful completion, scif_vwriteto() returns 0; otherwise in user
- * mode -1 is returned and errno is set to indicate the error; in kernel mode
- * the negative of one of the following errors is returned.
- *
- * Errors:
- * EACCES - Attempt to write to a read-only range
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - rma_flags is invalid
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENXIO - Offsets in the range [roffset, roffset + len - 1] are invalid for the
- * registered address space of epd
- */
-int scif_vwriteto(scif_epd_t epd, void *addr, size_t len, off_t roffset,
- int rma_flags);
-
-/**
- * scif_fence_mark() - Mark previously issued RMAs
- * @epd: endpoint descriptor
- * @flags: control flags
- * @mark: marked value returned as output.
- *
- * scif_fence_mark() returns after marking the current set of all uncompleted
- * RMAs initiated through the endpoint epd or the current set of all
- * uncompleted RMAs initiated through the peer of endpoint epd. The RMAs are
- * marked with a value returned at mark. The application may subsequently call
- * scif_fence_wait(), passing the value returned at mark, to await completion
- * of all RMAs so marked.
- *
- * The flags argument has exactly one of the following values.
- * SCIF_FENCE_INIT_SELF - RMA operations initiated through endpoint
- * epd are marked
- * SCIF_FENCE_INIT_PEER - RMA operations initiated through the peer
- * of endpoint epd are marked
- *
- * Return:
- * Upon successful completion, scif_fence_mark() returns 0; otherwise in user
- * mode -1 is returned and errno is set to indicate the error; in kernel mode
- * the negative of one of the following errors is returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - flags is invalid
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENOMEM - Insufficient kernel memory was available
- */
-int scif_fence_mark(scif_epd_t epd, int flags, int *mark);
-
-/**
- * scif_fence_wait() - Wait for completion of marked RMAs
- * @epd: endpoint descriptor
- * @mark: mark request
- *
- * scif_fence_wait() returns after all RMAs marked with mark have completed.
- * The value passed in mark must have been obtained in a previous call to
- * scif_fence_mark().
- *
- * Return:
- * Upon successful completion, scif_fence_wait() returns 0; otherwise in user
- * mode -1 is returned and errno is set to indicate the error; in kernel mode
- * the negative of one of the following errors is returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENOMEM - Insufficient kernel memory was available
- */
-int scif_fence_wait(scif_epd_t epd, int mark);
-
-/**
- * scif_fence_signal() - Request a memory update on completion of RMAs
- * @epd: endpoint descriptor
- * @loff: local offset
- * @lval: local value to write to loffset
- * @roff: remote offset
- * @rval: remote value to write to roffset
- * @flags: flags
- *
- * scif_fence_signal() returns after marking the current set of all uncompleted
- * RMAs initiated through the endpoint epd or marking the current set of all
- * uncompleted RMAs initiated through the peer of endpoint epd.
- *
- * If flags includes SCIF_SIGNAL_LOCAL, then on completion of the RMAs in the
- * marked set, lval is written to memory at the address corresponding to offset
- * loff in the local registered address space of epd. loff must be within a
- * registered window. If flags includes SCIF_SIGNAL_REMOTE, then on completion
- * of the RMAs in the marked set, rval is written to memory at the address
- * corresponding to offset roff in the remote registered address space of epd.
- * roff must be within a remote registered window of the peer of epd. Note
- * that any specified offset must be DWORD (4 byte / 32 bit) aligned.
- *
- * The flags argument is formed by OR'ing together the following.
- * Exactly one of the following values.
- * SCIF_FENCE_INIT_SELF - RMA operations initiated through endpoint
- * epd are marked
- * SCIF_FENCE_INIT_PEER - RMA operations initiated through the peer
- * of endpoint epd are marked
- * One or more of the following values.
- * SCIF_SIGNAL_LOCAL - On completion of the marked set of RMAs, write lval to
- * memory at the address corresponding to offset loff in the local
- * registered address space of epd.
- * SCIF_SIGNAL_REMOTE - On completion of the marked set of RMAs, write rval to
- * memory at the address corresponding to offset roff in the remote
- * registered address space of epd.
- *
- * Return:
- * Upon successful completion, scif_fence_signal() returns 0; otherwise in
- * user mode -1 is returned and errno is set to indicate the error; in kernel
- * mode the negative of one of the following errors is returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - flags is invalid, or loff or roff are not DWORD aligned
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENXIO - loff is invalid for the registered address of epd, or roff is invalid
- * for the registered address space, of the peer of epd
- */
-int scif_fence_signal(scif_epd_t epd, off_t loff, u64 lval, off_t roff,
- u64 rval, int flags);
-
-/**
- * scif_get_node_ids() - Return information about online nodes
- * @nodes: array in which to return online node IDs
- * @len: number of entries in the nodes array
- * @self: address to place the node ID of the local node
- *
- * scif_get_node_ids() fills in the nodes array with up to len node IDs of the
- * nodes in the SCIF network. If there is not enough space in nodes, as
- * indicated by the len parameter, only len node IDs are returned in nodes. The
- * return value of scif_get_node_ids() is the total number of nodes currently in
- * the SCIF network. By checking the return value against the len parameter,
- * the user may determine if enough space for nodes was allocated.
- *
- * The node ID of the local node is returned at self.
- *
- * Return:
- * Upon successful completion, scif_get_node_ids() returns the actual number of
- * online nodes in the SCIF network including 'self'; otherwise in user mode
- * -1 is returned and errno is set to indicate the error; in kernel mode no
- * errors are returned.
- */
-int scif_get_node_ids(u16 *nodes, int len, u16 *self);
-
-/**
- * scif_pin_pages() - Pin a set of pages
- * @addr: Virtual address of range to pin
- * @len: Length of range to pin
- * @prot_flags: Page protection flags
- * @map_flags: Page classification flags
- * @pinned_pages: Handle to pinned pages
- *
- * scif_pin_pages() pins (locks in physical memory) the physical pages which
- * back the range of virtual address pages starting at addr and continuing for
- * len bytes. addr and len are constrained to be multiples of the page size. A
- * successful scif_pin_pages() call returns a handle to pinned_pages which may
- * be used in subsequent calls to scif_register_pinned_pages().
- *
- * The pages will remain pinned as long as there is a reference against the
- * scif_pinned_pages_t value returned by scif_pin_pages() and until
- * scif_unpin_pages() is called, passing the scif_pinned_pages_t value. A
- * reference is added to a scif_pinned_pages_t value each time a window is
- * created by calling scif_register_pinned_pages() and passing the
- * scif_pinned_pages_t value. A reference is removed from a
- * scif_pinned_pages_t value each time such a window is deleted.
- *
- * Subsequent operations which change the memory pages to which virtual
- * addresses are mapped (such as mmap(), munmap()) have no effect on the
- * scif_pinned_pages_t value or windows created against it.
- *
- * If the process will fork(), it is recommended that the registered
- * virtual address range be marked with MADV_DONTFORK. Doing so will prevent
- * problems due to copy-on-write semantics.
- *
- * The prot_flags argument is formed by OR'ing together one or more of the
- * following values.
- * SCIF_PROT_READ - allow read operations against the pages
- * SCIF_PROT_WRITE - allow write operations against the pages
- * The map_flags argument can be set as SCIF_MAP_KERNEL to interpret addr as a
- * kernel space address. By default, addr is interpreted as a user space
- * address.
- *
- * Return:
- * Upon successful completion, scif_pin_pages() returns 0; otherwise the
- * negative of one of the following errors is returned.
- *
- * Errors:
- * EINVAL - prot_flags is invalid, map_flags is invalid, or offset is negative
- * ENOMEM - Not enough space
- */
-int scif_pin_pages(void *addr, size_t len, int prot_flags, int map_flags,
- scif_pinned_pages_t *pinned_pages);
-
-/**
- * scif_unpin_pages() - Unpin a set of pages
- * @pinned_pages: Handle to pinned pages to be unpinned
- *
- * scif_unpin_pages() prevents scif_register_pinned_pages() from registering new
- * windows against pinned_pages. The physical pages represented by pinned_pages
- * will remain pinned until all windows previously registered against
- * pinned_pages are deleted (the window is scif_unregister()'d and all
- * references to the window are removed (see scif_unregister()).
- *
- * pinned_pages must have been obtain from a previous call to scif_pin_pages().
- * After calling scif_unpin_pages(), it is an error to pass pinned_pages to
- * scif_register_pinned_pages().
- *
- * Return:
- * Upon successful completion, scif_unpin_pages() returns 0; otherwise the
- * negative of one of the following errors is returned.
- *
- * Errors:
- * EINVAL - pinned_pages is not valid
- */
-int scif_unpin_pages(scif_pinned_pages_t pinned_pages);
-
-/**
- * scif_register_pinned_pages() - Mark a memory region for remote access.
- * @epd: endpoint descriptor
- * @pinned_pages: Handle to pinned pages
- * @offset: Registered address space offset
- * @map_flags: Flags which control where pages are mapped
- *
- * The scif_register_pinned_pages() function opens a window, a range of whole
- * pages of the registered address space of the endpoint epd, starting at
- * offset po. The value of po, further described below, is a function of the
- * parameters offset and pinned_pages, and the value of map_flags. Each page of
- * the window represents a corresponding physical memory page of the range
- * represented by pinned_pages; the length of the window is the same as the
- * length of range represented by pinned_pages. A successful
- * scif_register_pinned_pages() call returns po as the return value.
- *
- * When SCIF_MAP_FIXED is set in the map_flags argument, po will be offset
- * exactly, and offset is constrained to be a multiple of the page size. The
- * mapping established by scif_register_pinned_pages() will not replace any
- * existing registration; an error is returned if any page of the new window
- * would intersect an existing window.
- *
- * When SCIF_MAP_FIXED is not set, the implementation uses offset in an
- * implementation-defined manner to arrive at po. The po so chosen will be an
- * area of the registered address space that the implementation deems suitable
- * for a mapping of the required size. An offset value of 0 is interpreted as
- * granting the implementation complete freedom in selecting po, subject to
- * constraints described below. A non-zero value of offset is taken to be a
- * suggestion of an offset near which the mapping should be placed. When the
- * implementation selects a value for po, it does not replace any extant
- * window. In all cases, po will be a multiple of the page size.
- *
- * The physical pages which are so represented by a window are available for
- * access in calls to scif_get_pages(), scif_readfrom(), scif_writeto(),
- * scif_vreadfrom(), and scif_vwriteto(). While a window is registered, the
- * physical pages represented by the window will not be reused by the memory
- * subsystem for any other purpose. Note that the same physical page may be
- * represented by multiple windows.
- *
- * Windows created by scif_register_pinned_pages() are unregistered by
- * scif_unregister().
- *
- * The map_flags argument can be set to SCIF_MAP_FIXED which interprets a
- * fixed offset.
- *
- * Return:
- * Upon successful completion, scif_register_pinned_pages() returns the offset
- * at which the mapping was placed (po); otherwise the negative of one of the
- * following errors is returned.
- *
- * Errors:
- * EADDRINUSE - SCIF_MAP_FIXED is set in map_flags and pages in the new window
- * would intersect an existing window
- * EAGAIN - The mapping could not be performed due to lack of resources
- * ECONNRESET - Connection reset by peer
- * EINVAL - map_flags is invalid, or SCIF_MAP_FIXED is set in map_flags, and
- * offset is not a multiple of the page size, or offset is negative
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOMEM - Not enough space
- * ENOTCONN - The endpoint is not connected
- */
-off_t scif_register_pinned_pages(scif_epd_t epd,
- scif_pinned_pages_t pinned_pages,
- off_t offset, int map_flags);
-
-/**
- * scif_get_pages() - Add references to remote registered pages
- * @epd: endpoint descriptor
- * @offset: remote registered offset
- * @len: length of range of pages
- * @pages: returned scif_range structure
- *
- * scif_get_pages() returns the addresses of the physical pages represented by
- * those pages of the registered address space of the peer of epd, starting at
- * offset and continuing for len bytes. offset and len are constrained to be
- * multiples of the page size.
- *
- * All of the pages in the specified range [offset, offset + len - 1] must be
- * within a single window of the registered address space of the peer of epd.
- *
- * The addresses are returned as a virtually contiguous array pointed to by the
- * phys_addr component of the scif_range structure whose address is returned in
- * pages. The nr_pages component of scif_range is the length of the array. The
- * prot_flags component of scif_range holds the protection flag value passed
- * when the pages were registered.
- *
- * Each physical page whose address is returned by scif_get_pages() remains
- * available and will not be released for reuse until the scif_range structure
- * is returned in a call to scif_put_pages(). The scif_range structure returned
- * by scif_get_pages() must be unmodified.
- *
- * It is an error to call scif_close() on an endpoint on which a scif_range
- * structure of that endpoint has not been returned to scif_put_pages().
- *
- * Return:
- * Upon successful completion, scif_get_pages() returns 0; otherwise the
- * negative of one of the following errors is returned.
- * Errors:
- * ECONNRESET - Connection reset by peer.
- * EINVAL - offset is not a multiple of the page size, or offset is negative, or
- * len is not a multiple of the page size
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENXIO - Offsets in the range [offset, offset + len - 1] are invalid
- * for the registered address space of the peer epd
- */
-int scif_get_pages(scif_epd_t epd, off_t offset, size_t len,
- struct scif_range **pages);
-
-/**
- * scif_put_pages() - Remove references from remote registered pages
- * @pages: pages to be returned
- *
- * scif_put_pages() releases a scif_range structure previously obtained by
- * calling scif_get_pages(). The physical pages represented by pages may
- * be reused when the window which represented those pages is unregistered.
- * Therefore, those pages must not be accessed after calling scif_put_pages().
- *
- * Return:
- * Upon successful completion, scif_put_pages() returns 0; otherwise the
- * negative of one of the following errors is returned.
- * Errors:
- * EINVAL - pages does not point to a valid scif_range structure, or
- * the scif_range structure pointed to by pages was already returned
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- */
-int scif_put_pages(struct scif_range *pages);
-
-/**
- * scif_poll() - Wait for some event on an endpoint
- * @epds: Array of endpoint descriptors
- * @nepds: Length of epds
- * @timeout: Upper limit on time for which scif_poll() will block
- *
- * scif_poll() waits for one of a set of endpoints to become ready to perform
- * an I/O operation.
- *
- * The epds argument specifies the endpoint descriptors to be examined and the
- * events of interest for each endpoint descriptor. epds is a pointer to an
- * array with one member for each open endpoint descriptor of interest.
- *
- * The number of items in the epds array is specified in nepds. The epd field
- * of scif_pollepd is an endpoint descriptor of an open endpoint. The field
- * events is a bitmask specifying the events which the application is
- * interested in. The field revents is an output parameter, filled by the
- * kernel with the events that actually occurred. The bits returned in revents
- * can include any of those specified in events, or one of the values EPOLLERR,
- * EPOLLHUP, or EPOLLNVAL. (These three bits are meaningless in the events
- * field, and will be set in the revents field whenever the corresponding
- * condition is true.)
- *
- * If none of the events requested (and no error) has occurred for any of the
- * endpoint descriptors, then scif_poll() blocks until one of the events occurs.
- *
- * The timeout argument specifies an upper limit on the time for which
- * scif_poll() will block, in milliseconds. Specifying a negative value in
- * timeout means an infinite timeout.
- *
- * The following bits may be set in events and returned in revents.
- * EPOLLIN - Data may be received without blocking. For a connected
- * endpoint, this means that scif_recv() may be called without blocking. For a
- * listening endpoint, this means that scif_accept() may be called without
- * blocking.
- * EPOLLOUT - Data may be sent without blocking. For a connected endpoint, this
- * means that scif_send() may be called without blocking. EPOLLOUT may also be
- * used to block waiting for a non-blocking connect to complete. This bit value
- * has no meaning for a listening endpoint and is ignored if specified.
- *
- * The following bits are only returned in revents, and are ignored if set in
- * events.
- * EPOLLERR - An error occurred on the endpoint
- * EPOLLHUP - The connection to the peer endpoint was disconnected
- * EPOLLNVAL - The specified endpoint descriptor is invalid.
- *
- * Return:
- * Upon successful completion, scif_poll() returns a non-negative value. A
- * positive value indicates the total number of endpoint descriptors that have
- * been selected (that is, endpoint descriptors for which the revents member is
- * non-zero). A value of 0 indicates that the call timed out and no endpoint
- * descriptors have been selected. Otherwise in user mode -1 is returned and
- * errno is set to indicate the error; in kernel mode the negative of one of
- * the following errors is returned.
- *
- * Errors:
- * EINTR - A signal occurred before any requested event
- * EINVAL - The nepds argument is greater than {OPEN_MAX}
- * ENOMEM - There was no space to allocate file descriptor tables
- */
-int scif_poll(struct scif_pollepd *epds, unsigned int nepds, long timeout);
-
-/**
- * scif_client_register() - Register a SCIF client
- * @client: client to be registered
- *
- * scif_client_register() registers a SCIF client. The probe() method
- * of the client is called when SCIF peer devices come online and the
- * remove() method is called when the peer devices disappear.
- *
- * Return:
- * Upon successful completion, scif_client_register() returns a non-negative
- * value. Otherwise the return value is the same as subsys_interface_register()
- * in the kernel.
- */
-int scif_client_register(struct scif_client *client);
-
-/**
- * scif_client_unregister() - Unregister a SCIF client
- * @client: client to be unregistered
- *
- * scif_client_unregister() unregisters a SCIF client.
- *
- * Return:
- * None
- */
-void scif_client_unregister(struct scif_client *client);
-
-#endif /* __SCIF_H__ */
diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h
index 813614d4b71f..b83b3ae3c877 100644
--- a/include/linux/seq_file.h
+++ b/include/linux/seq_file.h
@@ -107,6 +107,7 @@ void seq_pad(struct seq_file *m, char c);
char *mangle_path(char *s, const char *p, const char *esc);
int seq_open(struct file *, const struct seq_operations *);
ssize_t seq_read(struct file *, char __user *, size_t, loff_t *);
+ssize_t seq_read_iter(struct kiocb *iocb, struct iov_iter *iter);
loff_t seq_lseek(struct file *, loff_t, int);
int seq_release(struct inode *, struct file *);
int seq_write(struct seq_file *seq, const void *data, size_t len);
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 7bbc0e9cf084..b256f9c65661 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -238,6 +238,7 @@ static inline void siginitset(sigset_t *set, unsigned long mask)
memset(&set->sig[1], 0, sizeof(long)*(_NSIG_WORDS-1));
break;
case 2: set->sig[1] = 0;
+ break;
case 1: ;
}
}
@@ -250,6 +251,7 @@ static inline void siginitsetinv(sigset_t *set, unsigned long mask)
memset(&set->sig[1], -1, sizeof(long)*(_NSIG_WORDS-1));
break;
case 2: set->sig[1] = -1;
+ break;
case 1: ;
}
}
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 41cc1192f9aa..f0b01b728640 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -359,6 +359,7 @@ struct sdw_dpn_prop {
* @sink_dpn_prop: Sink Data Port N properties
* @scp_int1_mask: SCP_INT1_MASK desired settings
* @quirks: bitmask identifying deltas from the MIPI specification
+ * @is_sdca: the Slave supports the SDCA specification
*/
struct sdw_slave_prop {
u32 mipi_revision;
@@ -382,6 +383,7 @@ struct sdw_slave_prop {
struct sdw_dpn_prop *sink_dpn_prop;
u8 scp_int1_mask;
u32 quirks;
+ bool is_sdca;
};
#define SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY BIT(0)
@@ -479,10 +481,12 @@ struct sdw_slave_id {
/**
* struct sdw_slave_intr_status - Slave interrupt status
+ * @sdca_cascade: set if the Slave device reports an SDCA interrupt
* @control_port: control port status
* @port: data port status
*/
struct sdw_slave_intr_status {
+ bool sdca_cascade;
u8 control_port;
u8 port[15];
};
diff --git a/include/linux/soundwire/sdw_registers.h b/include/linux/soundwire/sdw_registers.h
index f420e8059779..e14dff9a9c7f 100644
--- a/include/linux/soundwire/sdw_registers.h
+++ b/include/linux/soundwire/sdw_registers.h
@@ -298,4 +298,36 @@
#define SDW_CASC_PORT_MASK_INTSTAT3 1
#define SDW_CASC_PORT_REG_OFFSET_INTSTAT3 2
+/*
+ * v1.2 device - SDCA address mapping
+ *
+ * Spec definition
+ * Bits Contents
+ * 31 0 (required by addressing range)
+ * 30:26 0b10000 (Control Prefix)
+ * 25 0 (Reserved)
+ * 24:22 Function Number [2:0]
+ * 21 Entity[6]
+ * 20:19 Control Selector[5:4]
+ * 18 0 (Reserved)
+ * 17:15 Control Number[5:3]
+ * 14 Next
+ * 13 MBQ
+ * 12:7 Entity[5:0]
+ * 6:3 Control Selector[3:0]
+ * 2:0 Control Number[2:0]
+ */
+
+#define SDW_SDCA_CTL(fun, ent, ctl, ch) (BIT(30) | \
+ (((fun) & 0x7) << 22) | \
+ (((ent) & 0x40) << 15) | \
+ (((ent) & 0x3f) << 7) | \
+ (((ctl) & 0x30) << 15) | \
+ (((ctl) & 0x0f) << 3) | \
+ (((ch) & 0x38) << 12) | \
+ ((ch) & 0x07))
+
+#define SDW_SDCA_MBQ_CTL(reg) ((reg) | BIT(13))
+#define SDW_SDCA_NEXT_CTL(reg) ((reg) | BIT(14))
+
#endif /* __SDW_REGISTERS_H */
diff --git a/include/linux/time64.h b/include/linux/time64.h
index c9dcb3e5781f..5117cb5b5656 100644
--- a/include/linux/time64.h
+++ b/include/linux/time64.h
@@ -124,6 +124,10 @@ static inline bool timespec64_valid_settod(const struct timespec64 *ts)
*/
static inline s64 timespec64_to_ns(const struct timespec64 *ts)
{
+ /* Prevent multiplication overflow */
+ if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX)
+ return KTIME_MAX;
+
return ((s64) ts->tv_sec * NSEC_PER_SEC) + ts->tv_nsec;
}
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 2040696d75b6..a2d229ab63ba 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -437,7 +437,7 @@ static inline struct usb_composite_driver *to_cdriver(
#define OS_STRING_IDX 0xEE
/**
- * struct usb_composite_device - represents one composite usb gadget
+ * struct usb_composite_dev - represents one composite usb gadget
* @gadget: read-only, abstracts the gadget's usb peripheral controller
* @req: used for control responses; buffer is pre-allocated
* @os_desc_req: used for OS descriptors responses; buffer is pre-allocated
diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h
index eae0bfd87d91..30bc7a7223bb 100644
--- a/include/linux/vdpa.h
+++ b/include/linux/vdpa.h
@@ -53,6 +53,16 @@ struct vdpa_device {
};
/**
+ * vDPA IOVA range - the IOVA range support by the device
+ * @first: start of the IOVA range
+ * @last: end of the IOVA range
+ */
+struct vdpa_iova_range {
+ u64 first;
+ u64 last;
+};
+
+/**
* vDPA_config_ops - operations for configuring a vDPA device.
* Note: vDPA device drivers are required to implement all of the
* operations unless it is mentioned to be optional in the following
@@ -151,6 +161,10 @@ struct vdpa_device {
* @get_generation: Get device config generation (optional)
* @vdev: vdpa device
* Returns u32: device generation
+ * @get_iova_range: Get supported iova range (optional)
+ * @vdev: vdpa device
+ * Returns the iova range supported by
+ * the device.
* @set_map: Set device memory mapping (optional)
* Needed for device that using device
* specific DMA translation (on-chip IOMMU)
@@ -216,6 +230,7 @@ struct vdpa_config_ops {
void (*set_config)(struct vdpa_device *vdev, unsigned int offset,
const void *buf, unsigned int len);
u32 (*get_generation)(struct vdpa_device *vdev);
+ struct vdpa_iova_range (*get_iova_range)(struct vdpa_device *vdev);
/* DMA ops */
int (*set_map)(struct vdpa_device *vdev, struct vhost_iotlb *iotlb);
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 661edfc8722e..d5ab8d99739f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1444,7 +1444,7 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
enum cfg80211_station_type statype);
/**
- * enum station_info_rate_flags - bitrate info flags
+ * enum rate_info_flags - bitrate info flags
*
* Used by the driver to indicate the specific rate transmission
* type for 802.11n transmissions.
@@ -1517,7 +1517,7 @@ struct rate_info {
};
/**
- * enum station_info_rate_flags - bitrate info flags
+ * enum bss_param_flags - bitrate info flags
*
* Used by the driver to indicate the specific rate transmission
* type for 802.11n transmissions.
@@ -6467,7 +6467,8 @@ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid,
struct ieee80211_channel *channel, gfp_t gfp);
/**
- * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate
+ * cfg80211_notify_new_peer_candidate - notify cfg80211 of a new mesh peer
+ * candidate
*
* @dev: network device
* @macaddr: the MAC address of the new candidate
@@ -7606,7 +7607,7 @@ u32 cfg80211_calculate_bitrate(struct rate_info *rate);
void cfg80211_unregister_wdev(struct wireless_dev *wdev);
/**
- * struct cfg80211_ft_event - FT Information Elements
+ * struct cfg80211_ft_event_params - FT Information Elements
* @ies: FT IEs
* @ies_len: length of the FT IE in bytes
* @target_ap: target AP's MAC address
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index e8e295dae744..dcdba96814a2 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -3311,7 +3311,7 @@ enum ieee80211_roc_type {
};
/**
- * enum ieee80211_reconfig_complete_type - reconfig type
+ * enum ieee80211_reconfig_type - reconfig type
*
* This enum is used by the reconfig_complete() callback to indicate what
* reconfiguration type was completed.
@@ -6334,7 +6334,8 @@ bool ieee80211_tx_prepare_skb(struct ieee80211_hw *hw,
int band, struct ieee80211_sta **sta);
/**
- * Sanity-check and parse the radiotap header of injected frames
+ * ieee80211_parse_tx_radiotap - Sanity-check and parse the radiotap header
+ * of injected frames
* @skb: packet injected by userspace
* @dev: the &struct device of this 802.11 device
*/
@@ -6389,7 +6390,7 @@ int ieee80211_parse_p2p_noa(const struct ieee80211_p2p_noa_attr *attr,
void ieee80211_update_p2p_noa(struct ieee80211_noa_data *data, u32 tsf);
/**
- * ieee80211_tdls_oper - request userspace to perform a TDLS operation
+ * ieee80211_tdls_oper_request - request userspace to perform a TDLS operation
* @vif: virtual interface
* @peer: the peer's destination address
* @oper: the requested TDLS operation
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h
index c672ae1da26b..32a67af18415 100644
--- a/include/rdma/rdma_cm.h
+++ b/include/rdma/rdma_cm.h
@@ -227,19 +227,9 @@ void rdma_destroy_qp(struct rdma_cm_id *id);
int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr,
int *qp_attr_mask);
-/**
- * rdma_connect - Initiate an active connection request.
- * @id: Connection identifier to connect.
- * @conn_param: Connection information used for connected QPs.
- *
- * Users must have resolved a route for the rdma_cm_id to connect with
- * by having called rdma_resolve_route before calling this routine.
- *
- * This call will either connect to a remote QP or obtain remote QP
- * information for unconnected rdma_cm_id's. The actual operation is
- * based on the rdma_cm_id's port space.
- */
int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);
+int rdma_connect_locked(struct rdma_cm_id *id,
+ struct rdma_conn_param *conn_param);
int rdma_connect_ece(struct rdma_cm_id *id, struct rdma_conn_param *conn_param,
struct rdma_ucm_ece *ece);
diff --git a/include/sound/control.h b/include/sound/control.h
index e128cff10dfa..77d9fa10812d 100644
--- a/include/sound/control.h
+++ b/include/sound/control.h
@@ -42,7 +42,7 @@ struct snd_kcontrol_new {
snd_ctl_elem_iface_t iface; /* interface identifier */
unsigned int device; /* device/client number */
unsigned int subdevice; /* subdevice (substream) number */
- const unsigned char *name; /* ASCII name of item */
+ const char *name; /* ASCII name of item */
unsigned int index; /* index of item */
unsigned int access; /* access rights */
unsigned int count; /* count of same elements */
diff --git a/include/sound/core.h b/include/sound/core.h
index 381a010a1bd4..0462c577d7a3 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -332,7 +332,8 @@ void __snd_printk(unsigned int level, const char *file, int line,
#define snd_BUG() WARN(1, "BUG?\n")
/**
- * Suppress high rates of output when CONFIG_SND_DEBUG is enabled.
+ * snd_printd_ratelimit - Suppress high rates of output when
+ * CONFIG_SND_DEBUG is enabled.
*/
#define snd_printd_ratelimit() printk_ratelimit()
diff --git a/include/sound/graph_card.h b/include/sound/graph_card.h
new file mode 100644
index 000000000000..bbb5a137855c
--- /dev/null
+++ b/include/sound/graph_card.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * ASoC audio graph card support
+ *
+ */
+
+#ifndef __GRAPH_CARD_H
+#define __GRAPH_CARD_H
+
+#include <sound/simple_card_utils.h>
+
+int graph_card_probe(struct snd_soc_card *card);
+
+int graph_parse_of(struct asoc_simple_priv *priv, struct device *dev);
+
+#endif /* __GRAPH_CARD_H */
diff --git a/include/sound/intel-dsp-config.h b/include/sound/intel-dsp-config.h
index c36622bee3f8..d4609077c258 100644
--- a/include/sound/intel-dsp-config.h
+++ b/include/sound/intel-dsp-config.h
@@ -21,6 +21,7 @@ enum {
#if IS_ENABLED(CONFIG_SND_INTEL_DSP_CONFIG)
int snd_intel_dsp_driver_probe(struct pci_dev *pci);
+int snd_intel_acpi_dsp_driver_probe(struct device *dev, const u8 acpi_hid[ACPI_ID_LEN]);
#else
@@ -29,6 +30,12 @@ static inline int snd_intel_dsp_driver_probe(struct pci_dev *pci)
return SND_INTEL_DSP_DRIVER_ANY;
}
+static inline
+int snd_intel_acpi_dsp_driver_probe(struct device *dev, const u8 acpi_hid[ACPI_ID_LEN])
+{
+ return SND_INTEL_DSP_DRIVER_ANY;
+}
+
#endif
#endif
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 2ba5df2c9e23..2336bf9243e1 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -1284,8 +1284,8 @@ snd_pcm_sgbuf_get_ptr(struct snd_pcm_substream *substream, unsigned int ofs)
}
/**
- * snd_pcm_sgbuf_chunk_size - Compute the max size that fits within the contig.
- * page from the given size
+ * snd_pcm_sgbuf_get_chunk_size - Compute the max size that fits within the
+ * contig. page from the given size
* @substream: PCM substream
* @ofs: byte offset
* @size: byte size to examine
diff --git a/include/sound/rt5682.h b/include/sound/rt5682.h
index e1f790561ac1..3900a07e3935 100644
--- a/include/sound/rt5682.h
+++ b/include/sound/rt5682.h
@@ -40,6 +40,7 @@ struct rt5682_platform_data {
unsigned int btndet_delay;
unsigned int dmic_clk_rate;
unsigned int dmic_delay;
+ bool dmic_clk_driving_high;
const char *dai_clk_names[RT5682_DAI_NUM_CLKS];
};
diff --git a/include/sound/simple_card_utils.h b/include/sound/simple_card_utils.h
index 86a1e956991e..ba4a3e1897b9 100644
--- a/include/sound/simple_card_utils.h
+++ b/include/sound/simple_card_utils.h
@@ -56,6 +56,9 @@ struct asoc_simple_priv {
struct asoc_simple_dai *dais;
struct snd_soc_codec_conf *codec_conf;
struct gpio_desc *pa_gpio;
+ const struct snd_soc_ops *ops;
+ unsigned int dpcm_selectable:1;
+ unsigned int force_dpcm:1;
};
#define simple_priv_to_card(priv) (&(priv)->snd_card)
#define simple_priv_to_props(priv, i) ((priv)->dai_props + (i))
diff --git a/include/sound/soc-acpi-intel-match.h b/include/sound/soc-acpi-intel-match.h
index 5c49e7d78002..59551b1f22f3 100644
--- a/include/sound/soc-acpi-intel-match.h
+++ b/include/sound/soc-acpi-intel-match.h
@@ -29,12 +29,14 @@ extern struct snd_soc_acpi_mach snd_soc_acpi_intel_icl_machines[];
extern struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_machines[];
extern struct snd_soc_acpi_mach snd_soc_acpi_intel_ehl_machines[];
extern struct snd_soc_acpi_mach snd_soc_acpi_intel_jsl_machines[];
+extern struct snd_soc_acpi_mach snd_soc_acpi_intel_adl_machines[];
extern struct snd_soc_acpi_mach snd_soc_acpi_intel_cnl_sdw_machines[];
extern struct snd_soc_acpi_mach snd_soc_acpi_intel_cfl_sdw_machines[];
extern struct snd_soc_acpi_mach snd_soc_acpi_intel_cml_sdw_machines[];
extern struct snd_soc_acpi_mach snd_soc_acpi_intel_icl_sdw_machines[];
extern struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_sdw_machines[];
+extern struct snd_soc_acpi_mach snd_soc_acpi_intel_adl_sdw_machines[];
/*
* generic table used for HDA codec-based platforms, possibly with
diff --git a/include/sound/soc-acpi.h b/include/sound/soc-acpi.h
index b16a844d16ef..9a43c44dcbbb 100644
--- a/include/sound/soc-acpi.h
+++ b/include/sound/soc-acpi.h
@@ -171,4 +171,10 @@ struct snd_soc_acpi_codecs {
u8 codecs[SND_SOC_ACPI_MAX_CODECS][ACPI_ID_LEN];
};
+static inline bool snd_soc_acpi_sof_parent(struct device *dev)
+{
+ return dev->parent && dev->parent->driver && dev->parent->driver->name &&
+ !strcmp(dev->parent->driver->name, "sof-audio-acpi");
+}
+
#endif
diff --git a/include/sound/soc-component.h b/include/sound/soc-component.h
index 2c790ce95259..0bce41fefd30 100644
--- a/include/sound/soc-component.h
+++ b/include/sound/soc-component.h
@@ -220,6 +220,9 @@ struct snd_soc_component {
/* function mark */
struct snd_pcm_substream *mark_module;
struct snd_pcm_substream *mark_open;
+ struct snd_pcm_substream *mark_hw_params;
+ struct snd_pcm_substream *mark_trigger;
+ struct snd_compr_stream *mark_compr_open;
void *mark_pm;
#ifdef CONFIG_DEBUG_FS
@@ -443,6 +446,27 @@ int snd_soc_component_of_xlate_dai_id(struct snd_soc_component *component,
int snd_soc_component_of_xlate_dai_name(struct snd_soc_component *component,
struct of_phandle_args *args,
const char **dai_name);
+int snd_soc_component_compr_open(struct snd_compr_stream *cstream);
+void snd_soc_component_compr_free(struct snd_compr_stream *cstream,
+ int rollback);
+int snd_soc_component_compr_trigger(struct snd_compr_stream *cstream, int cmd);
+int snd_soc_component_compr_set_params(struct snd_compr_stream *cstream,
+ struct snd_compr_params *params);
+int snd_soc_component_compr_get_params(struct snd_compr_stream *cstream,
+ struct snd_codec *params);
+int snd_soc_component_compr_get_caps(struct snd_compr_stream *cstream,
+ struct snd_compr_caps *caps);
+int snd_soc_component_compr_get_codec_caps(struct snd_compr_stream *cstream,
+ struct snd_compr_codec_caps *codec);
+int snd_soc_component_compr_ack(struct snd_compr_stream *cstream, size_t bytes);
+int snd_soc_component_compr_pointer(struct snd_compr_stream *cstream,
+ struct snd_compr_tstamp *tstamp);
+int snd_soc_component_compr_copy(struct snd_compr_stream *cstream,
+ char __user *buf, size_t count);
+int snd_soc_component_compr_set_metadata(struct snd_compr_stream *cstream,
+ struct snd_compr_metadata *metadata);
+int snd_soc_component_compr_get_metadata(struct snd_compr_stream *cstream,
+ struct snd_compr_metadata *metadata);
int snd_soc_pcm_component_pointer(struct snd_pcm_substream *substream);
int snd_soc_pcm_component_ioctl(struct snd_pcm_substream *substream,
@@ -459,12 +483,11 @@ int snd_soc_pcm_component_new(struct snd_soc_pcm_runtime *rtd);
void snd_soc_pcm_component_free(struct snd_soc_pcm_runtime *rtd);
int snd_soc_pcm_component_prepare(struct snd_pcm_substream *substream);
int snd_soc_pcm_component_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_component **last);
+ struct snd_pcm_hw_params *params);
void snd_soc_pcm_component_hw_free(struct snd_pcm_substream *substream,
- struct snd_soc_component *last);
+ int rollback);
int snd_soc_pcm_component_trigger(struct snd_pcm_substream *substream,
- int cmd);
+ int cmd, int rollback);
int snd_soc_pcm_component_pm_runtime_get(struct snd_soc_pcm_runtime *rtd,
void *stream);
void snd_soc_pcm_component_pm_runtime_put(struct snd_soc_pcm_runtime *rtd,
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index 2150bd4c7a05..34d0dbf73ca9 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -72,21 +72,29 @@ struct snd_compr_stream;
#define SND_SOC_DAIFMT_IB_IF (4 << 8) /* invert BCLK + FRM */
/*
- * DAI hardware clock masters.
+ * DAI hardware clock providers/consumers
*
* This is wrt the codec, the inverse is true for the interface
- * i.e. if the codec is clk and FRM master then the interface is
- * clk and frame secondary.
+ * i.e. if the codec is clk and FRM provider then the interface is
+ * clk and frame consumer.
*/
-#define SND_SOC_DAIFMT_CBM_CFM (1 << 12) /* codec clk & FRM master */
-#define SND_SOC_DAIFMT_CBS_CFM (2 << 12) /* codec clk secondary & FRM master */
-#define SND_SOC_DAIFMT_CBM_CFS (3 << 12) /* codec clk master & frame secondary */
-#define SND_SOC_DAIFMT_CBS_CFS (4 << 12) /* codec clk & FRM secondary */
+#define SND_SOC_DAIFMT_CBP_CFP (1 << 12) /* codec clk provider & frame provider */
+#define SND_SOC_DAIFMT_CBC_CFP (2 << 12) /* codec clk consumer & frame provider */
+#define SND_SOC_DAIFMT_CBP_CFC (3 << 12) /* codec clk provider & frame consumer */
+#define SND_SOC_DAIFMT_CBC_CFC (4 << 12) /* codec clk consumer & frame follower */
-#define SND_SOC_DAIFMT_FORMAT_MASK 0x000f
-#define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0
-#define SND_SOC_DAIFMT_INV_MASK 0x0f00
-#define SND_SOC_DAIFMT_MASTER_MASK 0xf000
+/* previous definitions kept for backwards-compatibility, do not use in new contributions */
+#define SND_SOC_DAIFMT_CBM_CFM SND_SOC_DAIFMT_CBP_CFP
+#define SND_SOC_DAIFMT_CBS_CFM SND_SOC_DAIFMT_CBC_CFP
+#define SND_SOC_DAIFMT_CBM_CFS SND_SOC_DAIFMT_CBP_CFC
+#define SND_SOC_DAIFMT_CBS_CFS SND_SOC_DAIFMT_CBC_CFC
+
+#define SND_SOC_DAIFMT_FORMAT_MASK 0x000f
+#define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0
+#define SND_SOC_DAIFMT_INV_MASK 0x0f00
+#define SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK 0xf000
+
+#define SND_SOC_DAIFMT_MASTER_MASK SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK
/*
* Master Clock Directions
@@ -149,7 +157,8 @@ int snd_soc_dai_hw_params(struct snd_soc_dai *dai,
struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params);
void snd_soc_dai_hw_free(struct snd_soc_dai *dai,
- struct snd_pcm_substream *substream);
+ struct snd_pcm_substream *substream,
+ int rollback);
int snd_soc_dai_startup(struct snd_soc_dai *dai,
struct snd_pcm_substream *substream);
void snd_soc_dai_shutdown(struct snd_soc_dai *dai,
@@ -180,14 +189,16 @@ int snd_soc_pcm_dai_probe(struct snd_soc_pcm_runtime *rtd, int order);
int snd_soc_pcm_dai_remove(struct snd_soc_pcm_runtime *rtd, int order);
int snd_soc_pcm_dai_new(struct snd_soc_pcm_runtime *rtd);
int snd_soc_pcm_dai_prepare(struct snd_pcm_substream *substream);
-int snd_soc_pcm_dai_trigger(struct snd_pcm_substream *substream, int cmd);
+int snd_soc_pcm_dai_trigger(struct snd_pcm_substream *substream, int cmd,
+ int rollback);
int snd_soc_pcm_dai_bespoke_trigger(struct snd_pcm_substream *substream,
int cmd);
int snd_soc_dai_compr_startup(struct snd_soc_dai *dai,
struct snd_compr_stream *cstream);
void snd_soc_dai_compr_shutdown(struct snd_soc_dai *dai,
- struct snd_compr_stream *cstream);
+ struct snd_compr_stream *cstream,
+ int rollback);
int snd_soc_dai_compr_trigger(struct snd_soc_dai *dai,
struct snd_compr_stream *cstream, int cmd);
int snd_soc_dai_compr_set_params(struct snd_soc_dai *dai,
@@ -390,6 +401,9 @@ struct snd_soc_dai {
/* function mark */
struct snd_pcm_substream *mark_startup;
+ struct snd_pcm_substream *mark_hw_params;
+ struct snd_pcm_substream *mark_trigger;
+ struct snd_compr_stream *mark_compr_startup;
/* bit field */
unsigned int probed:1;
diff --git a/include/sound/soc-jack.h b/include/sound/soc-jack.h
new file mode 100644
index 000000000000..a0abb1ee5110
--- /dev/null
+++ b/include/sound/soc-jack.h
@@ -0,0 +1,132 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * soc-jack.h
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#ifndef __SOC_JACK_H
+#define __SOC_JACK_H
+
+/**
+ * struct snd_soc_jack_pin - Describes a pin to update based on jack detection
+ *
+ * @pin: name of the pin to update
+ * @mask: bits to check for in reported jack status
+ * @invert: if non-zero then pin is enabled when status is not reported
+ * @list: internal list entry
+ */
+struct snd_soc_jack_pin {
+ struct list_head list;
+ const char *pin;
+ int mask;
+ bool invert;
+};
+
+/**
+ * struct snd_soc_jack_zone - Describes voltage zones of jack detection
+ *
+ * @min_mv: start voltage in mv
+ * @max_mv: end voltage in mv
+ * @jack_type: type of jack that is expected for this voltage
+ * @debounce_time: debounce_time for jack, codec driver should wait for this
+ * duration before reading the adc for voltages
+ * @list: internal list entry
+ */
+struct snd_soc_jack_zone {
+ unsigned int min_mv;
+ unsigned int max_mv;
+ unsigned int jack_type;
+ unsigned int debounce_time;
+ struct list_head list;
+};
+
+/**
+ * struct snd_soc_jack_gpio - Describes a gpio pin for jack detection
+ *
+ * @gpio: legacy gpio number
+ * @idx: gpio descriptor index within the function of the GPIO
+ * consumer device
+ * @gpiod_dev: GPIO consumer device
+ * @name: gpio name. Also as connection ID for the GPIO consumer
+ * device function name lookup
+ * @report: value to report when jack detected
+ * @invert: report presence in low state
+ * @debounce_time: debounce time in ms
+ * @wake: enable as wake source
+ * @jack_status_check: callback function which overrides the detection
+ * to provide more complex checks (eg, reading an
+ * ADC).
+ */
+struct snd_soc_jack_gpio {
+ unsigned int gpio;
+ unsigned int idx;
+ struct device *gpiod_dev;
+ const char *name;
+ int report;
+ int invert;
+ int debounce_time;
+ bool wake;
+
+ /* private: */
+ struct snd_soc_jack *jack;
+ struct delayed_work work;
+ struct notifier_block pm_notifier;
+ struct gpio_desc *desc;
+
+ void *data;
+ /* public: */
+ int (*jack_status_check)(void *data);
+};
+
+struct snd_soc_jack {
+ struct mutex mutex;
+ struct snd_jack *jack;
+ struct snd_soc_card *card;
+ struct list_head pins;
+ int status;
+ struct blocking_notifier_head notifier;
+ struct list_head jack_zones;
+};
+
+/* Jack reporting */
+void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask);
+int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count,
+ struct snd_soc_jack_pin *pins);
+void snd_soc_jack_notifier_register(struct snd_soc_jack *jack,
+ struct notifier_block *nb);
+void snd_soc_jack_notifier_unregister(struct snd_soc_jack *jack,
+ struct notifier_block *nb);
+int snd_soc_jack_add_zones(struct snd_soc_jack *jack, int count,
+ struct snd_soc_jack_zone *zones);
+int snd_soc_jack_get_type(struct snd_soc_jack *jack, int micbias_voltage);
+#ifdef CONFIG_GPIOLIB
+int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
+ struct snd_soc_jack_gpio *gpios);
+int snd_soc_jack_add_gpiods(struct device *gpiod_dev,
+ struct snd_soc_jack *jack,
+ int count, struct snd_soc_jack_gpio *gpios);
+void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
+ struct snd_soc_jack_gpio *gpios);
+#else
+static inline int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
+ struct snd_soc_jack_gpio *gpios)
+{
+ return 0;
+}
+
+static inline int snd_soc_jack_add_gpiods(struct device *gpiod_dev,
+ struct snd_soc_jack *jack,
+ int count,
+ struct snd_soc_jack_gpio *gpios)
+{
+ return 0;
+}
+
+static inline void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
+ struct snd_soc_jack_gpio *gpios)
+{
+}
+#endif
+
+#endif /* __SOC_JACK_H */
diff --git a/include/sound/soc-link.h b/include/sound/soc-link.h
index dac6c0ce6ede..9314cde1756b 100644
--- a/include/sound/soc-link.h
+++ b/include/sound/soc-link.h
@@ -19,11 +19,14 @@ void snd_soc_link_shutdown(struct snd_pcm_substream *substream,
int snd_soc_link_prepare(struct snd_pcm_substream *substream);
int snd_soc_link_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params);
-void snd_soc_link_hw_free(struct snd_pcm_substream *substream);
-int snd_soc_link_trigger(struct snd_pcm_substream *substream, int cmd);
+void snd_soc_link_hw_free(struct snd_pcm_substream *substream,
+ int rollback);
+int snd_soc_link_trigger(struct snd_pcm_substream *substream, int cmd,
+ int rollback);
int snd_soc_link_compr_startup(struct snd_compr_stream *cstream);
-void snd_soc_link_compr_shutdown(struct snd_compr_stream *cstream);
+void snd_soc_link_compr_shutdown(struct snd_compr_stream *cstream,
+ int rollback);
int snd_soc_link_compr_set_params(struct snd_compr_stream *cstream);
#endif /* __SOC_LINK_H */
diff --git a/include/sound/soc-topology.h b/include/sound/soc-topology.h
index 5223896de26f..328cf763d9b4 100644
--- a/include/sound/soc-topology.h
+++ b/include/sound/soc-topology.h
@@ -31,9 +31,6 @@ struct snd_soc_dai_driver;
struct snd_soc_dai;
struct snd_soc_dapm_route;
-/* object scan be loaded and unloaded in groups with identfying indexes */
-#define SND_SOC_TPLG_INDEX_ALL 0 /* ID that matches all FW objects */
-
/* dynamic object type */
enum snd_soc_dobj_type {
SND_SOC_DOBJ_NONE = 0, /* object is not dynamic */
@@ -181,14 +178,8 @@ static inline const void *snd_soc_tplg_get_data(struct snd_soc_tplg_hdr *hdr)
/* Dynamic Object loading and removal for component drivers */
int snd_soc_tplg_component_load(struct snd_soc_component *comp,
- struct snd_soc_tplg_ops *ops, const struct firmware *fw,
- u32 index);
-int snd_soc_tplg_component_remove(struct snd_soc_component *comp, u32 index);
-
-/* Widget removal - widgets also removed wth component API */
-void snd_soc_tplg_widget_remove(struct snd_soc_dapm_widget *w);
-void snd_soc_tplg_widget_remove_all(struct snd_soc_dapm_context *dapm,
- u32 index);
+ struct snd_soc_tplg_ops *ops, const struct firmware *fw);
+int snd_soc_tplg_component_remove(struct snd_soc_component *comp);
/* Binds event handlers to dynamic widgets */
int snd_soc_tplg_widget_bind_event(struct snd_soc_dapm_widget *w,
diff --git a/include/sound/soc.h b/include/sound/soc.h
index 3b038c563ae1..3fa6c40a63b7 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -490,46 +490,6 @@ int snd_soc_params_to_bclk(struct snd_pcm_hw_params *parms);
int snd_soc_set_runtime_hwparams(struct snd_pcm_substream *substream,
const struct snd_pcm_hardware *hw);
-/* Jack reporting */
-void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask);
-int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count,
- struct snd_soc_jack_pin *pins);
-void snd_soc_jack_notifier_register(struct snd_soc_jack *jack,
- struct notifier_block *nb);
-void snd_soc_jack_notifier_unregister(struct snd_soc_jack *jack,
- struct notifier_block *nb);
-int snd_soc_jack_add_zones(struct snd_soc_jack *jack, int count,
- struct snd_soc_jack_zone *zones);
-int snd_soc_jack_get_type(struct snd_soc_jack *jack, int micbias_voltage);
-#ifdef CONFIG_GPIOLIB
-int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
- struct snd_soc_jack_gpio *gpios);
-int snd_soc_jack_add_gpiods(struct device *gpiod_dev,
- struct snd_soc_jack *jack,
- int count, struct snd_soc_jack_gpio *gpios);
-void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
- struct snd_soc_jack_gpio *gpios);
-#else
-static inline int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
- struct snd_soc_jack_gpio *gpios)
-{
- return 0;
-}
-
-static inline int snd_soc_jack_add_gpiods(struct device *gpiod_dev,
- struct snd_soc_jack *jack,
- int count,
- struct snd_soc_jack_gpio *gpios)
-{
- return 0;
-}
-
-static inline void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
- struct snd_soc_jack_gpio *gpios)
-{
-}
-#endif
-
struct snd_ac97 *snd_soc_alloc_ac97_component(struct snd_soc_component *component);
struct snd_ac97 *snd_soc_new_ac97_component(struct snd_soc_component *component,
unsigned int id, unsigned int id_mask);
@@ -616,87 +576,6 @@ int snd_soc_get_strobe(struct snd_kcontrol *kcontrol,
int snd_soc_put_strobe(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
-/**
- * struct snd_soc_jack_pin - Describes a pin to update based on jack detection
- *
- * @pin: name of the pin to update
- * @mask: bits to check for in reported jack status
- * @invert: if non-zero then pin is enabled when status is not reported
- * @list: internal list entry
- */
-struct snd_soc_jack_pin {
- struct list_head list;
- const char *pin;
- int mask;
- bool invert;
-};
-
-/**
- * struct snd_soc_jack_zone - Describes voltage zones of jack detection
- *
- * @min_mv: start voltage in mv
- * @max_mv: end voltage in mv
- * @jack_type: type of jack that is expected for this voltage
- * @debounce_time: debounce_time for jack, codec driver should wait for this
- * duration before reading the adc for voltages
- * @list: internal list entry
- */
-struct snd_soc_jack_zone {
- unsigned int min_mv;
- unsigned int max_mv;
- unsigned int jack_type;
- unsigned int debounce_time;
- struct list_head list;
-};
-
-/**
- * struct snd_soc_jack_gpio - Describes a gpio pin for jack detection
- *
- * @gpio: legacy gpio number
- * @idx: gpio descriptor index within the function of the GPIO
- * consumer device
- * @gpiod_dev: GPIO consumer device
- * @name: gpio name. Also as connection ID for the GPIO consumer
- * device function name lookup
- * @report: value to report when jack detected
- * @invert: report presence in low state
- * @debounce_time: debounce time in ms
- * @wake: enable as wake source
- * @jack_status_check: callback function which overrides the detection
- * to provide more complex checks (eg, reading an
- * ADC).
- */
-struct snd_soc_jack_gpio {
- unsigned int gpio;
- unsigned int idx;
- struct device *gpiod_dev;
- const char *name;
- int report;
- int invert;
- int debounce_time;
- bool wake;
-
- /* private: */
- struct snd_soc_jack *jack;
- struct delayed_work work;
- struct notifier_block pm_notifier;
- struct gpio_desc *desc;
-
- void *data;
- /* public: */
- int (*jack_status_check)(void *data);
-};
-
-struct snd_soc_jack {
- struct mutex mutex;
- struct snd_jack *jack;
- struct snd_soc_card *card;
- struct list_head pins;
- int status;
- struct blocking_notifier_head notifier;
- struct list_head jack_zones;
-};
-
/* SoC PCM stream information */
struct snd_soc_pcm_stream {
const char *stream_name;
@@ -1084,6 +963,7 @@ struct snd_soc_card {
unsigned int fully_routed:1;
unsigned int disable_route_checks:1;
unsigned int probed:1;
+ unsigned int component_chaining:1;
void *drvdata;
};
@@ -1161,6 +1041,9 @@ struct snd_soc_pcm_runtime {
/* function mark */
struct snd_pcm_substream *mark_startup;
+ struct snd_pcm_substream *mark_hw_params;
+ struct snd_pcm_substream *mark_trigger;
+ struct snd_compr_stream *mark_compr_startup;
/* bit field */
unsigned int pop_wait:1;
@@ -1183,21 +1066,15 @@ struct snd_soc_pcm_runtime {
for ((i) = 0; \
((i) < rtd->num_cpus) && ((dai) = asoc_rtd_to_cpu(rtd, i)); \
(i)++)
-#define for_each_rtd_cpu_dais_rollback(rtd, i, dai) \
- for (; (--(i) >= 0) && ((dai) = asoc_rtd_to_cpu(rtd, i));)
#define for_each_rtd_codec_dais(rtd, i, dai) \
for ((i) = 0; \
((i) < rtd->num_codecs) && ((dai) = asoc_rtd_to_codec(rtd, i)); \
(i)++)
-#define for_each_rtd_codec_dais_rollback(rtd, i, dai) \
- for (; (--(i) >= 0) && ((dai) = asoc_rtd_to_codec(rtd, i));)
#define for_each_rtd_dais(rtd, i, dai) \
for ((i) = 0; \
((i) < (rtd)->num_cpus + (rtd)->num_codecs) && \
((dai) = (rtd)->dais[i]); \
(i)++)
-#define for_each_rtd_dais_rollback(rtd, i, dai) \
- for (; (--(i) >= 0) && ((dai) = (rtd)->dais[i]);)
void snd_soc_close_delayed_work(struct snd_soc_pcm_runtime *rtd);
@@ -1418,5 +1295,6 @@ static inline void snd_soc_dapm_mutex_unlock(struct snd_soc_dapm_context *dapm)
#include <sound/soc-component.h>
#include <sound/soc-card.h>
+#include <sound/soc-jack.h>
#endif
diff --git a/include/sound/sof.h b/include/sound/sof.h
index 9aa055289dcc..646a655c3c6b 100644
--- a/include/sound/sof.h
+++ b/include/sound/sof.h
@@ -100,6 +100,8 @@ struct sof_dev_desc {
const struct snd_sof_dsp_ops *ops;
};
-int sof_nocodec_setup(struct device *dev,
- const struct snd_sof_dsp_ops *ops);
+int sof_nocodec_setup(struct device *dev, const struct snd_sof_dsp_ops *ops,
+ int (*pcm_dai_link_fixup)(struct snd_soc_pcm_runtime *rtd,
+ struct snd_pcm_hw_params *params));
+
#endif
diff --git a/include/sound/sof/dai.h b/include/sound/sof/dai.h
index 34f135adf8ec..6bb403e8c5ee 100644
--- a/include/sound/sof/dai.h
+++ b/include/sound/sof/dai.h
@@ -34,15 +34,21 @@
#define SOF_DAI_FMT_IB_NF (3 << 8) /**< invert BCLK + nor FRM */
#define SOF_DAI_FMT_IB_IF (4 << 8) /**< invert BCLK + FRM */
-#define SOF_DAI_FMT_CBM_CFM (0 << 12) /**< codec clk & FRM master */
-#define SOF_DAI_FMT_CBS_CFM (2 << 12) /**< codec clk slave & FRM master */
-#define SOF_DAI_FMT_CBM_CFS (3 << 12) /**< codec clk master & frame slave */
-#define SOF_DAI_FMT_CBS_CFS (4 << 12) /**< codec clk & FRM slave */
+#define SOF_DAI_FMT_CBP_CFP (0 << 12) /**< codec bclk provider & frame provider */
+#define SOF_DAI_FMT_CBC_CFP (2 << 12) /**< codec bclk consumer & frame provider */
+#define SOF_DAI_FMT_CBP_CFC (3 << 12) /**< codec bclk provider & frame consumer */
+#define SOF_DAI_FMT_CBC_CFC (4 << 12) /**< codec bclk consumer & frame consumer */
+
+/* keep old definitions for backwards compatibility */
+#define SOF_DAI_FMT_CBM_CFM SOF_DAI_FMT_CBP_CFP
+#define SOF_DAI_FMT_CBS_CFM SOF_DAI_FMT_CBC_CFP
+#define SOF_DAI_FMT_CBM_CFS SOF_DAI_FMT_CBP_CFC
+#define SOF_DAI_FMT_CBS_CFS SOF_DAI_FMT_CBC_CFC
#define SOF_DAI_FMT_FORMAT_MASK 0x000f
#define SOF_DAI_FMT_CLOCK_MASK 0x00f0
#define SOF_DAI_FMT_INV_MASK 0x0f00
-#define SOF_DAI_FMT_MASTER_MASK 0xf000
+#define SOF_DAI_FMT_CLOCK_PROVIDER_MASK 0xf000
/** \brief Types of DAI */
enum sof_ipc_dai_type {
diff --git a/include/sound/sof/debug.h b/include/sound/sof/debug.h
new file mode 100644
index 000000000000..3ecb5793789d
--- /dev/null
+++ b/include/sound/sof/debug.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * Copyright(c) 2020 Intel Corporation. All rights reserved.
+ *
+ * Author: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
+ */
+
+#ifndef __INCLUDE_SOUND_SOF_DEBUG_H__
+#define __INCLUDE_SOUND_SOF_DEBUG_H__
+
+#include <sound/sof/header.h>
+
+/** ABI3.18 */
+enum sof_ipc_dbg_mem_zone {
+ SOF_IPC_MEM_ZONE_SYS = 0, /**< System zone */
+ SOF_IPC_MEM_ZONE_SYS_RUNTIME = 1, /**< System-runtime zone */
+ SOF_IPC_MEM_ZONE_RUNTIME = 2, /**< Runtime zone */
+ SOF_IPC_MEM_ZONE_BUFFER = 3, /**< Buffer zone */
+};
+
+/** ABI3.18 */
+struct sof_ipc_dbg_mem_usage_elem {
+ uint32_t zone; /**< see sof_ipc_dbg_mem_zone */
+ uint32_t id; /**< heap index within zone */
+ uint32_t used; /**< number of bytes used in zone */
+ uint32_t free; /**< number of bytes free to use within zone */
+ uint32_t reserved; /**< for future use */
+} __packed;
+
+/** ABI3.18 */
+struct sof_ipc_dbg_mem_usage {
+ struct sof_ipc_reply rhdr; /**< generic IPC reply header */
+ uint32_t reserved[4]; /**< reserved for future use */
+ uint32_t num_elems; /**< elems[] counter */
+ struct sof_ipc_dbg_mem_usage_elem elems[]; /**< memory usage information */
+} __packed;
+
+#endif
diff --git a/include/sound/sof/ext_manifest.h b/include/sound/sof/ext_manifest.h
index 342e86e54db5..7abc4f0bd3ad 100644
--- a/include/sound/sof/ext_manifest.h
+++ b/include/sound/sof/ext_manifest.h
@@ -61,6 +61,8 @@ enum sof_ext_man_elem_type {
SOF_EXT_MAN_ELEM_WINDOW = SOF_IPC_EXT_WINDOW,
SOF_EXT_MAN_ELEM_CC_VERSION = SOF_IPC_EXT_CC_INFO,
SOF_EXT_MAN_ELEM_DBG_ABI = SOF_IPC_EXT_USER_ABI_INFO,
+ SOF_EXT_MAN_ELEM_CONFIG_DATA = 5, /**< ABI3.17 */
+ SOF_EXT_MAN_ELEM_PLATFORM_CONFIG_DATA = 6,
};
/* extended manifest element header */
@@ -99,4 +101,23 @@ struct ext_man_dbg_abi {
struct sof_ipc_user_abi_version dbg_abi;
} __packed;
+/* EXT_MAN_ELEM_CONFIG_DATA elements identificators, ABI3.17 */
+enum config_elem_type {
+ SOF_EXT_MAN_CONFIG_EMPTY = 0,
+ SOF_EXT_MAN_CONFIG_IPC_MSG_SIZE = 1,
+ SOF_EXT_MAN_CONFIG_MEMORY_USAGE_SCAN = 2, /**< ABI 3.18 */
+};
+
+struct sof_config_elem {
+ uint32_t token;
+ uint32_t value;
+} __packed;
+
+/* firmware configuration information */
+struct sof_ext_man_config_data {
+ struct sof_ext_man_elem_header hdr;
+
+ struct sof_config_elem elems[];
+} __packed;
+
#endif /* __SOF_FIRMWARE_EXT_MANIFEST_H__ */
diff --git a/include/sound/sof/header.h b/include/sound/sof/header.h
index 2d35997ace40..4c747c52e01b 100644
--- a/include/sound/sof/header.h
+++ b/include/sound/sof/header.h
@@ -31,12 +31,12 @@
/* Global Message - Generic */
#define SOF_GLB_TYPE_SHIFT 28
-#define SOF_GLB_TYPE_MASK (0xf << SOF_GLB_TYPE_SHIFT)
+#define SOF_GLB_TYPE_MASK (0xfL << SOF_GLB_TYPE_SHIFT)
#define SOF_GLB_TYPE(x) ((x) << SOF_GLB_TYPE_SHIFT)
/* Command Message - Generic */
#define SOF_CMD_TYPE_SHIFT 16
-#define SOF_CMD_TYPE_MASK (0xfff << SOF_CMD_TYPE_SHIFT)
+#define SOF_CMD_TYPE_MASK (0xfffL << SOF_CMD_TYPE_SHIFT)
#define SOF_CMD_TYPE(x) ((x) << SOF_CMD_TYPE_SHIFT)
/* Global Message Types */
@@ -49,9 +49,10 @@
#define SOF_IPC_FW_READY SOF_GLB_TYPE(0x7U)
#define SOF_IPC_GLB_DAI_MSG SOF_GLB_TYPE(0x8U)
#define SOF_IPC_GLB_TRACE_MSG SOF_GLB_TYPE(0x9U)
-#define SOF_IPC_GLB_GDB_DEBUG SOF_GLB_TYPE(0xAU)
+#define SOF_IPC_GLB_GDB_DEBUG SOF_GLB_TYPE(0xAU)
#define SOF_IPC_GLB_TEST_MSG SOF_GLB_TYPE(0xBU)
#define SOF_IPC_GLB_PROBE SOF_GLB_TYPE(0xCU)
+#define SOF_IPC_GLB_DEBUG SOF_GLB_TYPE(0xDU)
/*
* DSP Command Message Types
@@ -109,7 +110,7 @@
#define SOF_IPC_PROBE_DMA_ADD SOF_CMD_TYPE(0x003)
#define SOF_IPC_PROBE_DMA_INFO SOF_CMD_TYPE(0x004)
#define SOF_IPC_PROBE_DMA_REMOVE SOF_CMD_TYPE(0x005)
-#define SOF_IPC_PROBE_POINT_ADD SOF_CMD_TYPE(0x006)
+#define SOF_IPC_PROBE_POINT_ADD SOF_CMD_TYPE(0x006)
#define SOF_IPC_PROBE_POINT_INFO SOF_CMD_TYPE(0x007)
#define SOF_IPC_PROBE_POINT_REMOVE SOF_CMD_TYPE(0x008)
@@ -117,9 +118,13 @@
#define SOF_IPC_TRACE_DMA_PARAMS SOF_CMD_TYPE(0x001)
#define SOF_IPC_TRACE_DMA_POSITION SOF_CMD_TYPE(0x002)
#define SOF_IPC_TRACE_DMA_PARAMS_EXT SOF_CMD_TYPE(0x003)
+#define SOF_IPC_TRACE_FILTER_UPDATE SOF_CMD_TYPE(0x004) /**< ABI3.17 */
/* debug */
-#define SOF_IPC_TEST_IPC_FLOOD SOF_CMD_TYPE(0x001)
+#define SOF_IPC_DEBUG_MEM_USAGE SOF_CMD_TYPE(0x001)
+
+/* test */
+#define SOF_IPC_TEST_IPC_FLOOD SOF_CMD_TYPE(0x001)
/* Get message component id */
#define SOF_IPC_MESSAGE_ID(x) ((x) & 0xffff)
diff --git a/include/sound/sof/trace.h b/include/sound/sof/trace.h
index c31a94a13ce0..25ea99f62d37 100644
--- a/include/sound/sof/trace.h
+++ b/include/sound/sof/trace.h
@@ -43,6 +43,34 @@ struct sof_ipc_dma_trace_posn {
uint32_t messages; /* total trace messages */
} __packed;
+/* Values used in sof_ipc_trace_filter_elem: */
+
+/* bits 6..0 */
+#define SOF_IPC_TRACE_FILTER_ELEM_SET_LEVEL 0x01 /**< trace level for selected components */
+#define SOF_IPC_TRACE_FILTER_ELEM_BY_UUID 0x02 /**< filter by uuid key */
+#define SOF_IPC_TRACE_FILTER_ELEM_BY_PIPE 0x03 /**< filter by pipeline */
+#define SOF_IPC_TRACE_FILTER_ELEM_BY_COMP 0x04 /**< filter by component id */
+
+/* bit 7 */
+#define SOF_IPC_TRACE_FILTER_ELEM_FIN 0x80 /**< mark last filter in set */
+
+/* bits 31..8: Unused */
+
+/** part of sof_ipc_trace_filter, ABI3.17 */
+struct sof_ipc_trace_filter_elem {
+ uint32_t key; /**< SOF_IPC_TRACE_FILTER_ELEM_ {LEVEL, UUID, COMP, PIPE} */
+ uint32_t value; /**< element value */
+} __packed;
+
+/** Runtime tracing filtration data - SOF_IPC_TRACE_FILTER_UPDATE, ABI3.17 */
+struct sof_ipc_trace_filter {
+ struct sof_ipc_cmd_hdr hdr; /**< IPC command header */
+ uint32_t elem_cnt; /**< number of entries in elems[] array */
+ uint32_t reserved[8]; /**< reserved for future usage */
+ /** variable size array with new filtering settings */
+ struct sof_ipc_trace_filter_elem elems[];
+} __packed;
+
/*
* Commom debug
*/
diff --git a/include/trace/events/afs.h b/include/trace/events/afs.h
index 8eb49231c6bb..4eef374d4413 100644
--- a/include/trace/events/afs.h
+++ b/include/trace/events/afs.h
@@ -966,19 +966,6 @@ TRACE_EVENT(afs_dir_check_failed,
__entry->vnode, __entry->off, __entry->i_size)
);
-/*
- * We use page->private to hold the amount of the page that we've written to,
- * splitting the field into two parts. However, we need to represent a range
- * 0...PAGE_SIZE inclusive, so we can't support 64K pages on a 32-bit system.
- */
-#if PAGE_SIZE > 32768
-#define AFS_PRIV_MAX 0xffffffff
-#define AFS_PRIV_SHIFT 32
-#else
-#define AFS_PRIV_MAX 0xffff
-#define AFS_PRIV_SHIFT 16
-#endif
-
TRACE_EVENT(afs_page_dirty,
TP_PROTO(struct afs_vnode *vnode, const char *where,
pgoff_t page, unsigned long priv),
@@ -999,10 +986,11 @@ TRACE_EVENT(afs_page_dirty,
__entry->priv = priv;
),
- TP_printk("vn=%p %lx %s %lu-%lu",
+ TP_printk("vn=%p %lx %s %zx-%zx%s",
__entry->vnode, __entry->page, __entry->where,
- __entry->priv & AFS_PRIV_MAX,
- __entry->priv >> AFS_PRIV_SHIFT)
+ afs_page_dirty_from(__entry->priv),
+ afs_page_dirty_to(__entry->priv),
+ afs_is_page_dirty_mmapped(__entry->priv) ? " M" : "")
);
TRACE_EVENT(afs_call_state,
diff --git a/include/trace/events/asoc.h b/include/trace/events/asoc.h
index 40c300fe704d..4d8ef71090af 100644
--- a/include/trace/events/asoc.h
+++ b/include/trace/events/asoc.h
@@ -7,6 +7,7 @@
#include <linux/ktime.h>
#include <linux/tracepoint.h>
+#include <sound/jack.h>
#define DAPM_DIRECT "(direct)"
#define DAPM_ARROW(dir) (((dir) == SND_SOC_DAPM_DIR_OUT) ? "->" : "<-")
diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h
index c1661febc2dc..0564fd7ccde4 100644
--- a/include/uapi/linux/icmpv6.h
+++ b/include/uapi/linux/icmpv6.h
@@ -138,6 +138,7 @@ struct icmp6hdr {
#define ICMPV6_HDR_FIELD 0
#define ICMPV6_UNK_NEXTHDR 1
#define ICMPV6_UNK_OPTION 2
+#define ICMPV6_HDR_INCOMP 3
/*
* constants for (set|get)sockopt
diff --git a/include/uapi/linux/mic_common.h b/include/uapi/linux/mic_common.h
deleted file mode 100644
index 504e523f702c..000000000000
--- a/include/uapi/linux/mic_common.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * Intel MIC Platform Software Stack (MPSS)
- *
- * Copyright(c) 2013 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
- *
- * Intel MIC driver.
- *
- */
-#ifndef __MIC_COMMON_H_
-#define __MIC_COMMON_H_
-
-#include <linux/virtio_ring.h>
-
-#define __mic_align(a, x) (((a) + (x) - 1) & ~((x) - 1))
-
-/**
- * struct mic_device_desc: Virtio device information shared between the
- * virtio driver and userspace backend
- *
- * @type: Device type: console/network/disk etc. Type 0/-1 terminates.
- * @num_vq: Number of virtqueues.
- * @feature_len: Number of bytes of feature bits. Multiply by 2: one for
- host features and one for guest acknowledgements.
- * @config_len: Number of bytes of the config array after virtqueues.
- * @status: A status byte, written by the Guest.
- * @config: Start of the following variable length config.
- */
-struct mic_device_desc {
- __s8 type;
- __u8 num_vq;
- __u8 feature_len;
- __u8 config_len;
- __u8 status;
- __le64 config[0];
-} __attribute__ ((aligned(8)));
-
-/**
- * struct mic_device_ctrl: Per virtio device information in the device page
- * used internally by the host and card side drivers.
- *
- * @vdev: Used for storing MIC vdev information by the guest.
- * @config_change: Set to 1 by host when a config change is requested.
- * @vdev_reset: Set to 1 by guest to indicate virtio device has been reset.
- * @guest_ack: Set to 1 by guest to ack a command.
- * @host_ack: Set to 1 by host to ack a command.
- * @used_address_updated: Set to 1 by guest when the used address should be
- * updated.
- * @c2h_vdev_db: The doorbell number to be used by guest. Set by host.
- * @h2c_vdev_db: The doorbell number to be used by host. Set by guest.
- */
-struct mic_device_ctrl {
- __le64 vdev;
- __u8 config_change;
- __u8 vdev_reset;
- __u8 guest_ack;
- __u8 host_ack;
- __u8 used_address_updated;
- __s8 c2h_vdev_db;
- __s8 h2c_vdev_db;
-} __attribute__ ((aligned(8)));
-
-/**
- * struct mic_bootparam: Virtio device independent information in device page
- *
- * @magic: A magic value used by the card to ensure it can see the host
- * @h2c_config_db: Host to Card Virtio config doorbell set by card
- * @node_id: Unique id of the node
- * @h2c_scif_db - Host to card SCIF doorbell set by card
- * @c2h_scif_db - Card to host SCIF doorbell set by host
- * @scif_host_dma_addr - SCIF host queue pair DMA address
- * @scif_card_dma_addr - SCIF card queue pair DMA address
- */
-struct mic_bootparam {
- __le32 magic;
- __s8 h2c_config_db;
- __u8 node_id;
- __u8 h2c_scif_db;
- __u8 c2h_scif_db;
- __u64 scif_host_dma_addr;
- __u64 scif_card_dma_addr;
-} __attribute__ ((aligned(8)));
-
-/**
- * struct mic_device_page: High level representation of the device page
- *
- * @bootparam: The bootparam structure is used for sharing information and
- * status updates between MIC host and card drivers.
- * @desc: Array of MIC virtio device descriptors.
- */
-struct mic_device_page {
- struct mic_bootparam bootparam;
- struct mic_device_desc desc[0];
-};
-/**
- * struct mic_vqconfig: This is how we expect the device configuration field
- * for a virtqueue to be laid out in config space.
- *
- * @address: Guest/MIC physical address of the virtio ring
- * (avail and desc rings)
- * @used_address: Guest/MIC physical address of the used ring
- * @num: The number of entries in the virtio_ring
- */
-struct mic_vqconfig {
- __le64 address;
- __le64 used_address;
- __le16 num;
-} __attribute__ ((aligned(8)));
-
-/*
- * The alignment to use between consumer and producer parts of vring.
- * This is pagesize for historical reasons.
- */
-#define MIC_VIRTIO_RING_ALIGN 4096
-
-#define MIC_MAX_VRINGS 4
-#define MIC_VRING_ENTRIES 128
-
-/*
- * Max vring entries (power of 2) to ensure desc and avail rings
- * fit in a single page
- */
-#define MIC_MAX_VRING_ENTRIES 128
-
-/**
- * Max size of the desc block in bytes: includes:
- * - struct mic_device_desc
- * - struct mic_vqconfig (num_vq of these)
- * - host and guest features
- * - virtio device config space
- */
-#define MIC_MAX_DESC_BLK_SIZE 256
-
-/**
- * struct _mic_vring_info - Host vring info exposed to userspace backend
- * for the avail index and magic for the card.
- *
- * @avail_idx: host avail idx
- * @magic: A magic debug cookie.
- */
-struct _mic_vring_info {
- __u16 avail_idx;
- __le32 magic;
-};
-
-/**
- * struct mic_vring - Vring information.
- *
- * @vr: The virtio ring.
- * @info: Host vring information exposed to the userspace backend for the
- * avail index and magic for the card.
- * @va: The va for the buffer allocated for vr and info.
- * @len: The length of the buffer required for allocating vr and info.
- */
-struct mic_vring {
- struct vring vr;
- struct _mic_vring_info *info;
- void *va;
- int len;
-};
-
-#define mic_aligned_desc_size(d) __mic_align(mic_desc_size(d), 8)
-
-#ifndef INTEL_MIC_CARD
-static inline unsigned mic_desc_size(const struct mic_device_desc *desc)
-{
- return sizeof(*desc) + desc->num_vq * sizeof(struct mic_vqconfig)
- + desc->feature_len * 2 + desc->config_len;
-}
-
-static inline struct mic_vqconfig *
-mic_vq_config(const struct mic_device_desc *desc)
-{
- return (struct mic_vqconfig *)(desc + 1);
-}
-
-static inline __u8 *mic_vq_features(const struct mic_device_desc *desc)
-{
- return (__u8 *)(mic_vq_config(desc) + desc->num_vq);
-}
-
-static inline __u8 *mic_vq_configspace(const struct mic_device_desc *desc)
-{
- return mic_vq_features(desc) + desc->feature_len * 2;
-}
-static inline unsigned mic_total_desc_size(struct mic_device_desc *desc)
-{
- return mic_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl);
-}
-#endif
-
-/* Device page size */
-#define MIC_DP_SIZE 4096
-
-#define MIC_MAGIC 0xc0ffee00
-
-/**
- * enum mic_states - MIC states.
- */
-enum mic_states {
- MIC_READY = 0,
- MIC_BOOTING,
- MIC_ONLINE,
- MIC_SHUTTING_DOWN,
- MIC_RESETTING,
- MIC_RESET_FAILED,
- MIC_LAST
-};
-
-/**
- * enum mic_status - MIC status reported by card after
- * a host or card initiated shutdown or a card crash.
- */
-enum mic_status {
- MIC_NOP = 0,
- MIC_CRASHED,
- MIC_HALTED,
- MIC_POWER_OFF,
- MIC_RESTART,
- MIC_STATUS_LAST
-};
-
-#endif
diff --git a/include/uapi/linux/mic_ioctl.h b/include/uapi/linux/mic_ioctl.h
deleted file mode 100644
index 687b9cd9d3e2..000000000000
--- a/include/uapi/linux/mic_ioctl.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * Intel MIC Platform Software Stack (MPSS)
- *
- * Copyright(c) 2013 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
- *
- * Intel MIC Host driver.
- *
- */
-#ifndef _MIC_IOCTL_H_
-#define _MIC_IOCTL_H_
-
-#include <linux/types.h>
-
-/*
- * mic_copy - MIC virtio descriptor copy.
- *
- * @iov: An array of IOVEC structures containing user space buffers.
- * @iovcnt: Number of IOVEC structures in iov.
- * @vr_idx: The vring index.
- * @update_used: A non zero value results in used index being updated.
- * @out_len: The aggregate of the total length written to or read from
- * the virtio device.
- */
-struct mic_copy_desc {
-#ifdef __KERNEL__
- struct iovec __user *iov;
-#else
- struct iovec *iov;
-#endif
- __u32 iovcnt;
- __u8 vr_idx;
- __u8 update_used;
- __u32 out_len;
-};
-
-/*
- * Add a new virtio device
- * The (struct mic_device_desc *) pointer points to a device page entry
- * for the virtio device consisting of:
- * - struct mic_device_desc
- * - struct mic_vqconfig (num_vq of these)
- * - host and guest features
- * - virtio device config space
- * The total size referenced by the pointer should equal the size returned
- * by desc_size() in mic_common.h
- */
-#define MIC_VIRTIO_ADD_DEVICE _IOWR('s', 1, struct mic_device_desc *)
-
-/*
- * Copy the number of entries in the iovec and update the used index
- * if requested by the user.
- */
-#define MIC_VIRTIO_COPY_DESC _IOWR('s', 2, struct mic_copy_desc *)
-
-/*
- * Notify virtio device of a config change
- * The (__u8 *) pointer points to config space values for the device
- * as they should be written into the device page. The total size
- * referenced by the pointer should equal the config_len field of struct
- * mic_device_desc.
- */
-#define MIC_VIRTIO_CONFIG_CHANGE _IOWR('s', 5, __u8 *)
-
-#endif
diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
index 75232185324a..c998860d7bbc 100644
--- a/include/uapi/linux/vhost.h
+++ b/include/uapi/linux/vhost.h
@@ -146,4 +146,8 @@
/* Set event fd for config interrupt*/
#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int)
+
+/* Get the valid iova range */
+#define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \
+ struct vhost_vdpa_iova_range)
#endif
diff --git a/include/uapi/linux/vhost_types.h b/include/uapi/linux/vhost_types.h
index 9a269a88a6ff..f7f6a3a28977 100644
--- a/include/uapi/linux/vhost_types.h
+++ b/include/uapi/linux/vhost_types.h
@@ -138,6 +138,15 @@ struct vhost_vdpa_config {
__u8 buf[0];
};
+/* vhost vdpa IOVA range
+ * @first: First address that can be mapped by vhost-vDPA
+ * @last: Last address that can be mapped by vhost-vDPA
+ */
+struct vhost_vdpa_iova_range {
+ __u64 first;
+ __u64 last;
+};
+
/* Feature bits */
/* Log all write descriptors. Can be changed while device is active. */
#define VHOST_F_LOG_ALL 26
diff --git a/include/uapi/sound/asoc.h b/include/uapi/sound/asoc.h
index a74ca232f1fc..da61398b1f8f 100644
--- a/include/uapi/sound/asoc.h
+++ b/include/uapi/sound/asoc.h
@@ -170,16 +170,22 @@
#define SND_SOC_TPLG_LNK_FLGBIT_VOICE_WAKEUP (1 << 3)
/* DAI topology BCLK parameter
- * For the backwards capability, by default codec is bclk master
+ * For the backwards capability, by default codec is bclk provider
*/
-#define SND_SOC_TPLG_BCLK_CM 0 /* codec is bclk master */
-#define SND_SOC_TPLG_BCLK_CS 1 /* codec is bclk slave */
+#define SND_SOC_TPLG_BCLK_CP 0 /* codec is bclk provider */
+#define SND_SOC_TPLG_BCLK_CC 1 /* codec is bclk consumer */
+/* keep previous definitions for compatibility */
+#define SND_SOC_TPLG_BCLK_CM SND_SOC_TPLG_BCLK_CP
+#define SND_SOC_TPLG_BCLK_CS SND_SOC_TPLG_BCLK_CC
/* DAI topology FSYNC parameter
- * For the backwards capability, by default codec is fsync master
+ * For the backwards capability, by default codec is fsync provider
*/
-#define SND_SOC_TPLG_FSYNC_CM 0 /* codec is fsync master */
-#define SND_SOC_TPLG_FSYNC_CS 1 /* codec is fsync slave */
+#define SND_SOC_TPLG_FSYNC_CP 0 /* codec is fsync provider */
+#define SND_SOC_TPLG_FSYNC_CC 1 /* codec is fsync consumer */
+/* keep previous definitions for compatibility */
+#define SND_SOC_TPLG_FSYNC_CM SND_SOC_TPLG_FSYNC_CP
+#define SND_SOC_TPLG_FSYNC_CS SND_SOC_TPLG_FSYNC_CC
/*
* Block Header.
@@ -336,8 +342,8 @@ struct snd_soc_tplg_hw_config {
__u8 clock_gated; /* SND_SOC_TPLG_DAI_CLK_GATE_ value */
__u8 invert_bclk; /* 1 for inverted BCLK, 0 for normal */
__u8 invert_fsync; /* 1 for inverted frame clock, 0 for normal */
- __u8 bclk_master; /* SND_SOC_TPLG_BCLK_ value */
- __u8 fsync_master; /* SND_SOC_TPLG_FSYNC_ value */
+ __u8 bclk_provider; /* SND_SOC_TPLG_BCLK_ value */
+ __u8 fsync_provider; /* SND_SOC_TPLG_FSYNC_ value */
__u8 mclk_direction; /* SND_SOC_TPLG_MCLK_ value */
__le16 reserved; /* for 32bit alignment */
__le32 mclk_rate; /* MCLK or SYSCLK freqency in Hz */
diff --git a/include/uapi/sound/compress_offload.h b/include/uapi/sound/compress_offload.h
index 7184265c0b0d..9555f31c8425 100644
--- a/include/uapi/sound/compress_offload.h
+++ b/include/uapi/sound/compress_offload.h
@@ -144,7 +144,7 @@ struct snd_compr_metadata {
__u32 value[8];
} __attribute__((packed, aligned(4)));
-/**
+/*
* compress path ioctl definitions
* SNDRV_COMPRESS_GET_CAPS: Query capability of DSP
* SNDRV_COMPRESS_GET_CODEC_CAPS: Query capability of a codec
diff --git a/include/uapi/sound/sof/abi.h b/include/uapi/sound/sof/abi.h
index 6af32f82fb99..fe2cfae94b45 100644
--- a/include/uapi/sound/sof/abi.h
+++ b/include/uapi/sound/sof/abi.h
@@ -26,7 +26,7 @@
/* SOF ABI version major, minor and patch numbers */
#define SOF_ABI_MAJOR 3
-#define SOF_ABI_MINOR 17
+#define SOF_ABI_MINOR 18
#define SOF_ABI_PATCH 0
/* SOF ABI version number. Format within 32bit word is MMmmmppp */
diff --git a/include/video/imx-ipu-v3.h b/include/video/imx-ipu-v3.h
index 06b0b57e996c..d1b3889f74d8 100644
--- a/include/video/imx-ipu-v3.h
+++ b/include/video/imx-ipu-v3.h
@@ -484,9 +484,6 @@ int ipu_smfc_set_watermark(struct ipu_smfc *smfc, u32 set_level, u32 clr_level);
enum ipu_color_space ipu_drm_fourcc_to_colorspace(u32 drm_fourcc);
enum ipu_color_space ipu_pixelformat_to_colorspace(u32 pixelformat);
-enum ipu_color_space ipu_mbus_code_to_colorspace(u32 mbus_code);
-int ipu_stride_to_bytes(u32 pixel_stride, u32 pixelformat);
-bool ipu_pixelformat_is_planar(u32 pixelformat);
int ipu_degrees_to_rot_mode(enum ipu_rotate_mode *mode, int degrees,
bool hflip, bool vflip);
int ipu_rot_mode_to_degrees(int *degrees, enum ipu_rotate_mode mode,