diff options
author | Shawn Lin <shawn.lin@rock-chips.com> | 2016-05-26 04:56:22 +0300 |
---|---|---|
committer | Ulf Hansson <ulf.hansson@linaro.org> | 2016-07-25 11:34:05 +0300 |
commit | 81ac2af65793ecfbd79875d45043ff4adc0982b8 (patch) | |
tree | 69b4cce8998d3921d6b04720e658a6d6593e8d4c /include | |
parent | ef29c0e273b874018f1802d12957d22008138240 (diff) | |
download | linux-81ac2af65793ecfbd79875d45043ff4adc0982b8.tar.xz |
mmc: core: implement enhanced strobe support
Controllers use data strobe line to latch data from devices
under hs400 mode, but not for cmd line. So since emmc 5.1, JEDEC
introduces enhanced strobe mode for latching cmd response from
emmc devices to host controllers. This new feature is optional,
so it depends both on device's cap and host's cap to decide
whether to use it or not.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'include')
-rw-r--r-- | include/linux/mmc/card.h | 1 | ||||
-rw-r--r-- | include/linux/mmc/host.h | 11 | ||||
-rw-r--r-- | include/linux/mmc/mmc.h | 3 |
3 files changed, 15 insertions, 0 deletions
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index eb0151bac50c..22defc2a83b7 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -95,6 +95,7 @@ struct mmc_ext_csd { u8 raw_partition_support; /* 160 */ u8 raw_rpmb_size_mult; /* 168 */ u8 raw_erased_mem_count; /* 181 */ + u8 strobe_support; /* 184 */ u8 raw_ext_csd_structure; /* 194 */ u8 raw_card_type; /* 196 */ u8 raw_driver_strength; /* 197 */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index b836a271e2df..d72c0c34c21d 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -19,6 +19,7 @@ #include <linux/mmc/core.h> #include <linux/mmc/card.h> +#include <linux/mmc/mmc.h> #include <linux/mmc/pm.h> struct mmc_ios { @@ -77,6 +78,8 @@ struct mmc_ios { #define MMC_SET_DRIVER_TYPE_A 1 #define MMC_SET_DRIVER_TYPE_C 2 #define MMC_SET_DRIVER_TYPE_D 3 + + bool enhanced_strobe; /* hs400es selection */ }; struct mmc_host_ops { @@ -143,6 +146,9 @@ struct mmc_host_ops { /* Prepare HS400 target operating frequency depending host driver */ int (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios); + /* Prepare enhanced strobe depending host driver */ + void (*hs400_enhanced_strobe)(struct mmc_host *host, + struct mmc_ios *ios); int (*select_drive_strength)(struct mmc_card *card, unsigned int max_dtr, int host_drv, int card_drv, int *drv_type); @@ -514,6 +520,11 @@ static inline bool mmc_card_hs400(struct mmc_card *card) return card->host->ios.timing == MMC_TIMING_MMC_HS400; } +static inline bool mmc_card_hs400es(struct mmc_card *card) +{ + return card->host->ios.enhanced_strobe; +} + void mmc_retune_timer_stop(struct mmc_host *host); static inline void mmc_retune_needed(struct mmc_host *host) diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 15f2c4a0a62c..c376209c70ef 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -297,6 +297,7 @@ struct _mmc_csd { #define EXT_CSD_PART_CONFIG 179 /* R/W */ #define EXT_CSD_ERASED_MEM_CONT 181 /* RO */ #define EXT_CSD_BUS_WIDTH 183 /* R/W */ +#define EXT_CSD_STROBE_SUPPORT 184 /* RO */ #define EXT_CSD_HS_TIMING 185 /* R/W */ #define EXT_CSD_POWER_CLASS 187 /* R/W */ #define EXT_CSD_REV 192 /* RO */ @@ -380,12 +381,14 @@ struct _mmc_csd { #define EXT_CSD_CARD_TYPE_HS400_1_2V (1<<7) /* Card can run at 200MHz DDR, 1.2V */ #define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \ EXT_CSD_CARD_TYPE_HS400_1_2V) +#define EXT_CSD_CARD_TYPE_HS400ES (1<<8) /* Card can run at HS400ES */ #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ #define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ #define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ +#define EXT_CSD_BUS_WIDTH_STROBE BIT(7) /* Enhanced strobe mode */ #define EXT_CSD_TIMING_BC 0 /* Backwards compatility */ #define EXT_CSD_TIMING_HS 1 /* High speed */ |