Merge tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:

  PCI device hotplug:
    - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman)
    - Assign resources on per-host bridge basis (Yinghai Lu)

  MPS (Max Payload Size):
    - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang)
    - Add warnings about unsafe MPS settings (Yijing Wang)
    - Simplify interface and messages (Bjorn Helgaas)

  SR-IOV:
    - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann)
    - Update NumVFs register when disabling SR-IOV (Yijing Wang)

  Virtualization:
    - Add bus and slot reset support (Alex Williamson)
    - Fix ACS (Access Control Services) issues (Alex Williamson)

  Miscellaneous:
    - Simplify PCIe Capability accessors (Bjorn Helgaas)
    - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott)
    - Disable decoding during BAR sizing only when necessary (Zoltan Kiss)
    - Delay enabling bridges until they're needed (Yinghai Lu)
    - Split Designware support into Synopsys and Exynos parts (Jingoo Han)
    - Convert class code to use dev_groups (Greg Kroah-Hartman)
    - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon)
    - Fix bridge I/O window alignment (Bjorn Helgaas)
    - Add pci_wait_for_pending_transaction() (Casey Leedom)
    - Use devm_ioremap_resource() in Marvell driver (Tushar Behera)

* tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available
  PCI: exynos: Add I/O access wrappers
  PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
  PCI: Remove pcie_cap_has_devctl()
  PCI: Support PCIe Capability Slot registers only for ports with slots
  PCI: Remove PCIe Capability version checks
  PCI: Allow PCIe Capability link-related register access for switches
  PCI: Add offsets of PCIe capability registers
  PCI: Tidy bitmasks and spacing of PCIe capability definitions
  PCI: Remove obsolete comment reference to pci_pcie_cap2()
  PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment
  PCI: Rename PCIe capability definitions to follow convention
  PCI: Warn if unsafe MPS settings detected
  PCI: Fix MPS peer-to-peer DMA comment syntax
  PCI: Disable decoding for BAR sizing only when it was actually enabled
  PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n
  PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality
  PCI: Don't restrict MPS for slots below Root Ports
  PCI: Simplify MPS test for Downstream Port
  PCI: Remove unnecessary check for pcie_get_mps() failure
  ...

3 files changed, 75 insertions, 56 deletions

diff --git a/include/linux/pci.h b/include/linux/pci.h
index 0fd1f1582fa1..186540d74f36 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -675,7 +675,7 @@ struct pci_driver {
 /* these external functions are only available when PCI support is enabled */
 #ifdef CONFIG_PCI
 
-void pcie_bus_configure_settings(struct pci_bus *bus, u8 smpss);
+void pcie_bus_configure_settings(struct pci_bus *bus);
 
 enum pcie_bus_config_types {
 	PCIE_BUS_TUNE_OFF,
@@ -914,6 +914,7 @@ bool pci_check_and_unmask_intx(struct pci_dev *dev);
 void pci_msi_off(struct pci_dev *dev);
 int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size);
 int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask);
+int pci_wait_for_pending_transaction(struct pci_dev *dev);
 int pcix_get_max_mmrbc(struct pci_dev *dev);
 int pcix_get_mmrbc(struct pci_dev *dev);
 int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc);
@@ -924,6 +925,11 @@ int pcie_set_mps(struct pci_dev *dev, int mps);
 int __pci_reset_function(struct pci_dev *dev);
 int __pci_reset_function_locked(struct pci_dev *dev);
 int pci_reset_function(struct pci_dev *dev);
+int pci_probe_reset_slot(struct pci_slot *slot);
+int pci_reset_slot(struct pci_slot *slot);
+int pci_probe_reset_bus(struct pci_bus *bus);
+int pci_reset_bus(struct pci_bus *bus);
+void pci_reset_bridge_secondary_bus(struct pci_dev *dev);
 void pci_update_resource(struct pci_dev *dev, int resno);
 int __must_check pci_assign_resource(struct pci_dev *dev, int i);
 int __must_check pci_reassign_resource(struct pci_dev *dev, int i, resource_size_t add_size, resource_size_t align);
@@ -1003,6 +1009,7 @@ int pci_claim_resource(struct pci_dev *, int);
 void pci_assign_unassigned_resources(void);
 void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge);
 void pci_assign_unassigned_bus_resources(struct pci_bus *bus);
+void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus);
 void pdev_enable_device(struct pci_dev *);
 int pci_enable_resources(struct pci_dev *, int mask);
 void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
@@ -1043,7 +1050,6 @@ int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
 						  resource_size_t,
 						  resource_size_t),
 			void *alignf_data);
-void pci_enable_bridges(struct pci_bus *bus);
 
 /* Proper probing supporting hot-pluggable devices */
 int __must_check __pci_register_driver(struct pci_driver *, struct module *,
@@ -1648,6 +1654,10 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev,
 int pcibios_add_device(struct pci_dev *dev);
 void pcibios_release_device(struct pci_dev *dev);
 
+#ifdef CONFIG_HIBERNATE_CALLBACKS
+extern struct dev_pm_ops pcibios_pm_ops;
+#endif
+
 #ifdef CONFIG_PCI_MMCONFIG
 void __init pci_mmcfg_early_init(void);
 void __init pci_mmcfg_late_init(void);
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 8db71dcd6337..bd32109e607e 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -63,6 +63,9 @@ enum pcie_link_width {
  * @get_adapter_status: Called to get see if an adapter is present in the slot or not.
  *	If this field is NULL, the value passed in the struct hotplug_slot_info
  *	will be used when this value is requested by a user.
+ * @reset_slot: Optional interface to allow override of a bus reset for the
+ *	slot for cases where a secondary bus reset can result in spurious
+ *	hotplug events or where a slot can be reset independent of the bus.
  *
  * The table of function pointers that is passed to the hotplug pci core by a
  * hotplug pci driver.  These functions are called by the hotplug pci core when
@@ -80,6 +83,7 @@ struct hotplug_slot_ops {
 	int (*get_attention_status)	(struct hotplug_slot *slot, u8 *value);
 	int (*get_latch_status)		(struct hotplug_slot *slot, u8 *value);
 	int (*get_adapter_status)	(struct hotplug_slot *slot, u8 *value);
+	int (*reset_slot)		(struct hotplug_slot *slot, int probe);
 };
 
 /**
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index c3cc01d474b0..baa7852468ef 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -421,24 +421,24 @@
 #define  PCI_EXP_TYPE_ROOT_PORT 0x4	/* Root Port */
 #define  PCI_EXP_TYPE_UPSTREAM	0x5	/* Upstream Port */
 #define  PCI_EXP_TYPE_DOWNSTREAM 0x6	/* Downstream Port */
-#define  PCI_EXP_TYPE_PCI_BRIDGE 0x7	/* PCI/PCI-X Bridge */
-#define  PCI_EXP_TYPE_PCIE_BRIDGE 0x8	/* PCI/PCI-X to PCIE Bridge */
+#define  PCI_EXP_TYPE_PCI_BRIDGE 0x7	/* PCIe to PCI/PCI-X Bridge */
+#define  PCI_EXP_TYPE_PCIE_BRIDGE 0x8	/* PCI/PCI-X to PCIe Bridge */
 #define  PCI_EXP_TYPE_RC_END	0x9	/* Root Complex Integrated Endpoint */
 #define  PCI_EXP_TYPE_RC_EC	0xa	/* Root Complex Event Collector */
 #define PCI_EXP_FLAGS_SLOT	0x0100	/* Slot implemented */
 #define PCI_EXP_FLAGS_IRQ	0x3e00	/* Interrupt message number */
 #define PCI_EXP_DEVCAP		4	/* Device capabilities */
-#define  PCI_EXP_DEVCAP_PAYLOAD	0x07	/* Max_Payload_Size */
-#define  PCI_EXP_DEVCAP_PHANTOM	0x18	/* Phantom functions */
-#define  PCI_EXP_DEVCAP_EXT_TAG	0x20	/* Extended tags */
-#define  PCI_EXP_DEVCAP_L0S	0x1c0	/* L0s Acceptable Latency */
-#define  PCI_EXP_DEVCAP_L1	0xe00	/* L1 Acceptable Latency */
-#define  PCI_EXP_DEVCAP_ATN_BUT	0x1000	/* Attention Button Present */
-#define  PCI_EXP_DEVCAP_ATN_IND	0x2000	/* Attention Indicator Present */
-#define  PCI_EXP_DEVCAP_PWR_IND	0x4000	/* Power Indicator Present */
-#define  PCI_EXP_DEVCAP_RBER	0x8000	/* Role-Based Error Reporting */
-#define  PCI_EXP_DEVCAP_PWR_VAL	0x3fc0000 /* Slot Power Limit Value */
-#define  PCI_EXP_DEVCAP_PWR_SCL	0xc000000 /* Slot Power Limit Scale */
+#define  PCI_EXP_DEVCAP_PAYLOAD	0x00000007 /* Max_Payload_Size */
+#define  PCI_EXP_DEVCAP_PHANTOM	0x00000018 /* Phantom functions */
+#define  PCI_EXP_DEVCAP_EXT_TAG	0x00000020 /* Extended tags */
+#define  PCI_EXP_DEVCAP_L0S	0x000001c0 /* L0s Acceptable Latency */
+#define  PCI_EXP_DEVCAP_L1	0x00000e00 /* L1 Acceptable Latency */
+#define  PCI_EXP_DEVCAP_ATN_BUT	0x00001000 /* Attention Button Present */
+#define  PCI_EXP_DEVCAP_ATN_IND	0x00002000 /* Attention Indicator Present */
+#define  PCI_EXP_DEVCAP_PWR_IND	0x00004000 /* Power Indicator Present */
+#define  PCI_EXP_DEVCAP_RBER	0x00008000 /* Role-Based Error Reporting */
+#define  PCI_EXP_DEVCAP_PWR_VAL	0x03fc0000 /* Slot Power Limit Value */
+#define  PCI_EXP_DEVCAP_PWR_SCL	0x0c000000 /* Slot Power Limit Scale */
 #define  PCI_EXP_DEVCAP_FLR     0x10000000 /* Function Level Reset */
 #define PCI_EXP_DEVCTL		8	/* Device Control */
 #define  PCI_EXP_DEVCTL_CERE	0x0001	/* Correctable Error Reporting En. */
@@ -454,16 +454,16 @@
 #define  PCI_EXP_DEVCTL_READRQ	0x7000	/* Max_Read_Request_Size */
 #define  PCI_EXP_DEVCTL_BCR_FLR 0x8000  /* Bridge Configuration Retry / FLR */
 #define PCI_EXP_DEVSTA		10	/* Device Status */
-#define  PCI_EXP_DEVSTA_CED	0x01	/* Correctable Error Detected */
-#define  PCI_EXP_DEVSTA_NFED	0x02	/* Non-Fatal Error Detected */
-#define  PCI_EXP_DEVSTA_FED	0x04	/* Fatal Error Detected */
-#define  PCI_EXP_DEVSTA_URD	0x08	/* Unsupported Request Detected */
-#define  PCI_EXP_DEVSTA_AUXPD	0x10	/* AUX Power Detected */
-#define  PCI_EXP_DEVSTA_TRPND	0x20	/* Transactions Pending */
+#define  PCI_EXP_DEVSTA_CED	0x0001	/* Correctable Error Detected */
+#define  PCI_EXP_DEVSTA_NFED	0x0002	/* Non-Fatal Error Detected */
+#define  PCI_EXP_DEVSTA_FED	0x0004	/* Fatal Error Detected */
+#define  PCI_EXP_DEVSTA_URD	0x0008	/* Unsupported Request Detected */
+#define  PCI_EXP_DEVSTA_AUXPD	0x0010	/* AUX Power Detected */
+#define  PCI_EXP_DEVSTA_TRPND	0x0020	/* Transactions Pending */
 #define PCI_EXP_LNKCAP		12	/* Link Capabilities */
 #define  PCI_EXP_LNKCAP_SLS	0x0000000f /* Supported Link Speeds */
-#define  PCI_EXP_LNKCAP_SLS_2_5GB 0x1	/* LNKCAP2 SLS Vector bit 0 (2.5GT/s) */
-#define  PCI_EXP_LNKCAP_SLS_5_0GB 0x2	/* LNKCAP2 SLS Vector bit 1 (5.0GT/s) */
+#define  PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */
+#define  PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */
 #define  PCI_EXP_LNKCAP_MLW	0x000003f0 /* Maximum Link Width */
 #define  PCI_EXP_LNKCAP_ASPMS	0x00000c00 /* ASPM Support */
 #define  PCI_EXP_LNKCAP_L0SEL	0x00007000 /* L0s Exit Latency */
@@ -475,21 +475,21 @@
 #define  PCI_EXP_LNKCAP_PN	0xff000000 /* Port Number */
 #define PCI_EXP_LNKCTL		16	/* Link Control */
 #define  PCI_EXP_LNKCTL_ASPMC	0x0003	/* ASPM Control */
-#define  PCI_EXP_LNKCTL_ASPM_L0S  0x01	/* L0s Enable */
-#define  PCI_EXP_LNKCTL_ASPM_L1   0x02	/* L1 Enable */
+#define  PCI_EXP_LNKCTL_ASPM_L0S 0x0001	/* L0s Enable */
+#define  PCI_EXP_LNKCTL_ASPM_L1  0x0002	/* L1 Enable */
 #define  PCI_EXP_LNKCTL_RCB	0x0008	/* Read Completion Boundary */
 #define  PCI_EXP_LNKCTL_LD	0x0010	/* Link Disable */
 #define  PCI_EXP_LNKCTL_RL	0x0020	/* Retrain Link */
 #define  PCI_EXP_LNKCTL_CCC	0x0040	/* Common Clock Configuration */
 #define  PCI_EXP_LNKCTL_ES	0x0080	/* Extended Synch */
-#define  PCI_EXP_LNKCTL_CLKREQ_EN 0x100	/* Enable clkreq */
+#define  PCI_EXP_LNKCTL_CLKREQ_EN 0x0100 /* Enable clkreq */
 #define  PCI_EXP_LNKCTL_HAWD	0x0200	/* Hardware Autonomous Width Disable */
 #define  PCI_EXP_LNKCTL_LBMIE	0x0400	/* Link Bandwidth Management Interrupt Enable */
 #define  PCI_EXP_LNKCTL_LABIE	0x0800	/* Lnk Autonomous Bandwidth Interrupt Enable */
 #define PCI_EXP_LNKSTA		18	/* Link Status */
 #define  PCI_EXP_LNKSTA_CLS	0x000f	/* Current Link Speed */
-#define  PCI_EXP_LNKSTA_CLS_2_5GB 0x01	/* Current Link Speed 2.5GT/s */
-#define  PCI_EXP_LNKSTA_CLS_5_0GB 0x02	/* Current Link Speed 5.0GT/s */
+#define  PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */
+#define  PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */
 #define  PCI_EXP_LNKSTA_NLW	0x03f0	/* Nogotiated Link Width */
 #define  PCI_EXP_LNKSTA_NLW_SHIFT 4	/* start of NLW mask in link status */
 #define  PCI_EXP_LNKSTA_LT	0x0800	/* Link Training */
@@ -534,44 +534,49 @@
 #define  PCI_EXP_SLTSTA_EIS	0x0080	/* Electromechanical Interlock Status */
 #define  PCI_EXP_SLTSTA_DLLSC	0x0100	/* Data Link Layer State Changed */
 #define PCI_EXP_RTCTL		28	/* Root Control */
-#define  PCI_EXP_RTCTL_SECEE	0x01	/* System Error on Correctable Error */
-#define  PCI_EXP_RTCTL_SENFEE	0x02	/* System Error on Non-Fatal Error */
-#define  PCI_EXP_RTCTL_SEFEE	0x04	/* System Error on Fatal Error */
-#define  PCI_EXP_RTCTL_PMEIE	0x08	/* PME Interrupt Enable */
-#define  PCI_EXP_RTCTL_CRSSVE	0x10	/* CRS Software Visibility Enable */
+#define  PCI_EXP_RTCTL_SECEE	0x0001	/* System Error on Correctable Error */
+#define  PCI_EXP_RTCTL_SENFEE	0x0002	/* System Error on Non-Fatal Error */
+#define  PCI_EXP_RTCTL_SEFEE	0x0004	/* System Error on Fatal Error */
+#define  PCI_EXP_RTCTL_PMEIE	0x0008	/* PME Interrupt Enable */
+#define  PCI_EXP_RTCTL_CRSSVE	0x0010	/* CRS Software Visibility Enable */
 #define PCI_EXP_RTCAP		30	/* Root Capabilities */
 #define PCI_EXP_RTSTA		32	/* Root Status */
-#define PCI_EXP_RTSTA_PME	0x10000 /* PME status */
-#define PCI_EXP_RTSTA_PENDING	0x20000 /* PME pending */
+#define PCI_EXP_RTSTA_PME	0x00010000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING	0x00020000 /* PME pending */
 /*
- * Note that the following PCI Express 'Capability Structure' registers
- * were introduced with 'Capability Version' 0x2 (v2).  These registers
- * do not exist on devices with Capability Version 1.  Use pci_pcie_cap2()
- * to use these fields safely.
+ * The Device Capabilities 2, Device Status 2, Device Control 2,
+ * Link Capabilities 2, Link Status 2, Link Control 2,
+ * Slot Capabilities 2, Slot Status 2, and Slot Control 2 registers
+ * are only present on devices with PCIe Capability version 2.
+ * Use pcie_capability_read_word() and similar interfaces to use them
+ * safely.
  */
 #define PCI_EXP_DEVCAP2		36	/* Device Capabilities 2 */
-#define  PCI_EXP_DEVCAP2_ARI	0x20	/* Alternative Routing-ID */
-#define  PCI_EXP_DEVCAP2_LTR	0x800	/* Latency tolerance reporting */
-#define  PCI_EXP_OBFF_MASK	0xc0000 /* OBFF support mechanism */
-#define  PCI_EXP_OBFF_MSG	0x40000 /* New message signaling */
-#define  PCI_EXP_OBFF_WAKE	0x80000 /* Re-use WAKE# for OBFF */
+#define  PCI_EXP_DEVCAP2_ARI		0x00000020 /* Alternative Routing-ID */
+#define  PCI_EXP_DEVCAP2_LTR		0x00000800 /* Latency tolerance reporting */
+#define  PCI_EXP_DEVCAP2_OBFF_MASK	0x000c0000 /* OBFF support mechanism */
+#define  PCI_EXP_DEVCAP2_OBFF_MSG	0x00040000 /* New message signaling */
+#define  PCI_EXP_DEVCAP2_OBFF_WAKE	0x00080000 /* Re-use WAKE# for OBFF */
 #define PCI_EXP_DEVCTL2		40	/* Device Control 2 */
-#define  PCI_EXP_DEVCTL2_ARI	0x20	/* Alternative Routing-ID */
-#define  PCI_EXP_IDO_REQ_EN	0x100	/* ID-based ordering request enable */
-#define  PCI_EXP_IDO_CMP_EN	0x200	/* ID-based ordering completion enable */
-#define  PCI_EXP_LTR_EN		0x400	/* Latency tolerance reporting */
-#define  PCI_EXP_OBFF_MSGA_EN	0x2000	/* OBFF enable with Message type A */
-#define  PCI_EXP_OBFF_MSGB_EN	0x4000	/* OBFF enable with Message type B */
-#define  PCI_EXP_OBFF_WAKE_EN	0x6000	/* OBFF using WAKE# signaling */
+#define  PCI_EXP_DEVCTL2_ARI		0x20	/* Alternative Routing-ID */
+#define  PCI_EXP_DEVCTL2_IDO_REQ_EN	0x0100	/* Allow IDO for requests */
+#define  PCI_EXP_DEVCTL2_IDO_CMP_EN	0x0200	/* Allow IDO for completions */
+#define  PCI_EXP_DEVCTL2_LTR_EN		0x0400	/* Enable LTR mechanism */
+#define  PCI_EXP_DEVCTL2_OBFF_MSGA_EN	0x2000	/* Enable OBFF Message type A */
+#define  PCI_EXP_DEVCTL2_OBFF_MSGB_EN	0x4000	/* Enable OBFF Message type B */
+#define  PCI_EXP_DEVCTL2_OBFF_WAKE_EN	0x6000	/* OBFF using WAKE# signaling */
+#define PCI_EXP_DEVSTA2		42	/* Device Status 2 */
 #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2	44	/* v2 endpoints end here */
-#define PCI_EXP_LNKCAP2		44	/* Link Capability 2 */
-#define  PCI_EXP_LNKCAP2_SLS_2_5GB 0x02	/* Supported Link Speed 2.5GT/s */
-#define  PCI_EXP_LNKCAP2_SLS_5_0GB 0x04	/* Supported Link Speed 5.0GT/s */
-#define  PCI_EXP_LNKCAP2_SLS_8_0GB 0x08	/* Supported Link Speed 8.0GT/s */
-#define  PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */
+#define PCI_EXP_LNKCAP2		44	/* Link Capabilities 2 */
+#define  PCI_EXP_LNKCAP2_SLS_2_5GB	0x00000002 /* Supported Speed 2.5GT/s */
+#define  PCI_EXP_LNKCAP2_SLS_5_0GB	0x00000004 /* Supported Speed 5.0GT/s */
+#define  PCI_EXP_LNKCAP2_SLS_8_0GB	0x00000008 /* Supported Speed 8.0GT/s */
+#define  PCI_EXP_LNKCAP2_CROSSLINK	0x00000100 /* Crosslink supported */
 #define PCI_EXP_LNKCTL2		48	/* Link Control 2 */
 #define PCI_EXP_LNKSTA2		50	/* Link Status 2 */
+#define PCI_EXP_SLTCAP2		52	/* Slot Capabilities 2 */
 #define PCI_EXP_SLTCTL2		56	/* Slot Control 2 */
+#define PCI_EXP_SLTSTA2		58	/* Slot Status 2 */
 
 /* Extended Capabilities (PCI-X 2.0 and Express) */
 #define PCI_EXT_CAP_ID(header)		(header & 0x0000ffff)