ALSA: emu10k1: comment updates

Move comments to better locations, de-duplicate, fix/remove incorrect/
outdated ones, add new ones, and unify spacing somewhat.

While at it, also add testing credits for Jonathan Dowland (SB Live!
Platinum) and myself (E-MU 0404b).

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 files changed, 69 insertions, 76 deletions

diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c
index 672af4b9597b..b8163f26004a 100644
--- a/sound/pci/emu10k1/emu10k1.c
+++ b/sound/pci/emu10k1/emu10k1.c
@@ -68,17 +68,6 @@ static const struct pci_device_id snd_emu10k1_ids[] = {
 	{ 0, }
 };
 
-/*
- * Audigy 2 Value notes:
- * A_IOCFG Input (GPIO)
- * 0x400  = Front analog jack plugged in. (Green socket)
- * 0x1000 = Read analog jack plugged in. (Black socket)
- * 0x2000 = Center/LFE analog jack plugged in. (Orange socket)
- * A_IOCFG Output (GPIO)
- * 0x60 = Sound out of front Left.
- * Win sets it to 0xXX61
- */
-
 MODULE_DEVICE_TABLE(pci, snd_emu10k1_ids);
 
 static int snd_card_emu10k1_probe(struct pci_dev *pci,
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index c37df604d470..39b63c4ca1df 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -162,6 +162,8 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir)
 	outl(0, emu->port + INTE);
 	snd_emu10k1_ptr_write(emu, CLIEL, 0, 0);
 	snd_emu10k1_ptr_write(emu, CLIEH, 0, 0);
+
+	/* disable stop on loop end */
 	snd_emu10k1_ptr_write(emu, SOLEL, 0, 0);
 	snd_emu10k1_ptr_write(emu, SOLEH, 0, 0);
 
@@ -660,13 +662,14 @@ static int snd_emu1010_load_firmware_entry(struct snd_emu10k1 *emu,
 		return -EIO;
 
 	/* The FPGA is a Xilinx Spartan IIE XC2S50E */
+	/* On E-MU 0404b it is a Xilinx Spartan III XC3S50 */
 	/* GPIO7 -> FPGA PGMN
 	 * GPIO6 -> FPGA CCLK
 	 * GPIO5 -> FPGA DIN
 	 * FPGA CONFIG OFF -> FPGA PGMN
 	 */
 	spin_lock_irqsave(&emu->emu_lock, flags);
-	outw(0x00, emu->port + A_GPIO); /* Set PGMN low for 1uS. */
+	outw(0x00, emu->port + A_GPIO); /* Set PGMN low for 100uS. */
 	write_post = inw(emu->port + A_GPIO);
 	udelay(100);
 	outw(0x80, emu->port + A_GPIO); /* Leave bit 7 set during netlist setup. */
@@ -782,7 +785,7 @@ static void emu1010_firmware_work(struct work_struct *work)
 	} else if (!reg && emu->emu1010.last_reg) {
 		/* Audio Dock removed */
 		dev_info(emu->card->dev, "emu1010: Audio Dock detached\n");
-		/* Unmute all */
+		/* The hardware auto-mutes all, so we unmute again */
 		snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE);
 	}
 
@@ -794,29 +797,6 @@ static void emu1010_firmware_work(struct work_struct *work)
 }
 
 /*
- * EMU-1010 - details found out from this driver, official MS Win drivers,
- * testing the card:
- *
- * Audigy2 (aka Alice2):
- * ---------------------
- * 	* communication over PCI
- * 	* conversion of 32-bit data coming over EMU32 links from HANA FPGA
- *	  to 2 x 16-bit, using internal DSP instructions
- * 	* slave mode, clock supplied by HANA
- * 	* linked to HANA using:
- * 		32 x 32-bit serial EMU32 output channels
- * 		16 x EMU32 input channels
- * 		(?) x I2S I/O channels (?)
- *
- * FPGA (aka HANA):
- * ---------------
- * 	* provides all (?) physical inputs and outputs of the card
- * 		(ADC, DAC, SPDIF I/O, ADAT I/O, etc.)
- * 	* provides clock signal for the card and Alice2
- * 	* two crystals - for 44.1kHz and 48kHz multiples
- * 	* provides internal routing of signal sources to signal destinations
- * 	* inputs/outputs to Alice2 - see above
- *
  * Current status of the driver:
  * ----------------------------
  * 	* only 44.1/48kHz supported (the MS Win driver supports up to 192 kHz)
@@ -884,11 +864,8 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu)
 	snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &reg);
 	dev_info(emu->card->dev, "emu1010: Card options = 0x%x\n", reg);
 	/* Optical -> ADAT I/O  */
-	/* 0 : SPDIF
-	 * 1 : ADAT
-	 */
 	emu->emu1010.optical_in = 1; /* IN_ADAT */
-	emu->emu1010.optical_out = 1; /* IN_ADAT */
+	emu->emu1010.optical_out = 1; /* OUT_ADAT */
 	tmp = (emu->emu1010.optical_in ? EMU_HANA_OPTICAL_IN_ADAT : 0) |
 		(emu->emu1010.optical_out ? EMU_HANA_OPTICAL_OUT_ADAT : 0);
 	snd_emu1010_fpga_write(emu, EMU_HANA_OPTICAL_TYPE, tmp);
@@ -1279,6 +1256,15 @@ static const struct snd_emu_chip_details emu_chip_details[] = {
 	 * AC97: STAC9750
 	 * CA0151: None
 	 */
+	/*
+	 * A_IOCFG Input (GPIO)
+	 * 0x400  = Front analog jack plugged in. (Green socket)
+	 * 0x1000 = Rear analog jack plugged in. (Black socket)
+	 * 0x2000 = Center/LFE analog jack plugged in. (Orange socket)
+	 * A_IOCFG Output (GPIO)
+	 * 0x60 = Sound out of front Left.
+	 * Win sets it to 0xXX61
+	 */
 	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10011102,
 	 .driver = "Audigy2", .name = "SB Audigy 2 Value [SB0400]",
 	 .id = "Audigy2",
@@ -1327,6 +1313,9 @@ static const struct snd_emu_chip_details emu_chip_details[] = {
 	 .spi_dac = 1,
 	 .i2c_adc = 1,
 	 .spk71 = 1} ,
+	/* This is MAEM8950 "Mana" */
+	/* Attach MicroDock[M] to make it an E-MU 1616[m]. */
+	/* Does NOT support sync daughter card (obviously). */
 	/* Tested by James@superbug.co.uk 4th Nov 2007. */
 	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x42011102,
 	 .driver = "Audigy2", .name = "E-mu 1010 Notebook [MAEM8950]",
@@ -1337,7 +1326,10 @@ static const struct snd_emu_chip_details emu_chip_details[] = {
 	 .spk71 = 1 ,
 	 .emu_model = EMU_MODEL_EMU1616},
 	/* Tested by James@superbug.co.uk 4th Nov 2007. */
-	/* This is MAEM8960, 0202 is MAEM 8980 */
+	/* This is MAEM8960 "Hana3", 0202 is MAEM8980 */
+	/* Attach 0202 daughter card to make it an E-MU 1212m, OR a
+	 * MicroDock[M] to make it an E-MU 1616[m]. */
+	/* Does NOT support sync daughter card. */
 	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40041102,
 	 .driver = "Audigy2", .name = "E-mu 1010b PCI [MAEM8960]",
 	 .id = "EMU1010",
@@ -1347,6 +1339,11 @@ static const struct snd_emu_chip_details emu_chip_details[] = {
 	 .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 new revision */
 	/* Tested by Maxim Kachur <mcdebugger@duganet.ru> 17th Oct 2012. */
 	/* This is MAEM8986, 0202 is MAEM8980 */
+	/* Attach 0202 daughter card to make it an E-MU 1212m, OR a
+	 * MicroDockM to make it an E-MU 1616m. The non-m
+	 * version was never sold with this card, but should
+	 * still work. */
+	/* Does NOT support sync daughter card. */
 	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40071102,
 	 .driver = "Audigy2", .name = "E-mu 1010 PCIe [MAEM8986]",
 	 .id = "EMU1010",
@@ -1355,7 +1352,10 @@ static const struct snd_emu_chip_details emu_chip_details[] = {
 	 .spk71 = 1,
 	 .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 PCIe */
 	/* Tested by James@superbug.co.uk 8th July 2005. */
-	/* This is MAEM8810, 0202 is MAEM8820 */
+	/* This is MAEM8810 "Hana", 0202 is MAEM8820 "Hamoa" */
+	/* Attach 0202 daughter card to make it an E-MU 1212m, OR an
+	 * AudioDock[M] to make it an E-MU 1820[m]. */
+	/* Supports sync daughter card. */
 	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40011102,
 	 .driver = "Audigy2", .name = "E-mu 1010 [MAEM8810]",
 	 .id = "EMU1010",
@@ -1363,7 +1363,9 @@ static const struct snd_emu_chip_details emu_chip_details[] = {
 	 .ca0102_chip = 1,
 	 .spk71 = 1,
 	 .emu_model = EMU_MODEL_EMU1010}, /* EMU 1010 old revision */
-	/* EMU0404b */
+	/* This is MAEM8852 "HanaLiteLite" */
+	/* Supports sync daughter card. */
+	/* Tested by oswald.buddenhagen@gmx.de Mar 2023. */
 	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40021102,
 	 .driver = "Audigy2", .name = "E-mu 0404b PCI [MAEM8852]",
 	 .id = "EMU0404",
@@ -1371,6 +1373,8 @@ static const struct snd_emu_chip_details emu_chip_details[] = {
 	 .ca0108_chip = 1,
 	 .spk71 = 1,
 	 .emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 new revision */
+	/* This is MAEM8850 "HanaLite" */
+	/* Supports sync daughter card. */
 	/* Tested by James@superbug.co.uk 20-3-2007. */
 	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40021102,
 	 .driver = "Audigy2", .name = "E-mu 0404 [MAEM8850]",
@@ -1380,6 +1384,7 @@ static const struct snd_emu_chip_details emu_chip_details[] = {
 	 .spk71 = 1,
 	 .emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 */
 	/* EMU0404 PCIe */
+	/* Does NOT support sync daughter card. */
 	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40051102,
 	 .driver = "Audigy2", .name = "E-mu 0404 PCIe [MAEM8984]",
 	 .id = "EMU0404",
@@ -1387,7 +1392,6 @@ static const struct snd_emu_chip_details emu_chip_details[] = {
 	 .ca0108_chip = 1,
 	 .spk71 = 1,
 	 .emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 PCIe ver_03 */
-	/* Note that all E-mu cards require kernel 2.6 or newer. */
 	{.vendor = 0x1102, .device = 0x0008,
 	 .driver = "Audigy2", .name = "SB Audigy 2 Value [Unknown]",
 	 .id = "Audigy2",
@@ -1468,6 +1472,8 @@ static const struct snd_emu_chip_details emu_chip_details[] = {
 	 .spdif_bug = 1,
 	 .adc_1361t = 1,  /* 24 bit capture instead of 16bit */
 	 .ac97_chip = 1} ,
+	/* Audigy 2 Platinum EX */
+	/* Win driver sets A_IOCFG output to 0x1c00 */
 	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10051102,
 	 .driver = "Audigy2", .name = "Audigy 2 Platinum EX [SB0280]",
 	 .id = "Audigy2",
@@ -1488,6 +1494,8 @@ static const struct snd_emu_chip_details emu_chip_details[] = {
 	 .spdif_bug = 1,
 	 .invert_shared_spdif = 1,	/* digital/analog switch swapped */
 	 .ac97_chip = 1} ,
+	/* Audigy 2 Platinum */
+	/* Win driver sets A_IOCFG output to 0xa00 */
 	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10021102,
 	 .driver = "Audigy2", .name = "SB Audigy 2 Platinum [SB0240P]",
 	 .id = "Audigy2",
@@ -1593,6 +1601,9 @@ static const struct snd_emu_chip_details emu_chip_details[] = {
 	 .emu10k1_chip = 1,
 	 .ac97_chip = 1,
 	 .sblive51 = 1} ,
+	/* SB Live! Platinum */
+	/* Win driver sets A_IOCFG output to 0 */
+	/* Tested by Jonathan Dowland <jon@dow.land> Apr 2023. */
 	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80401102,
 	 .driver = "EMU10K1", .name = "SB Live! Platinum [CT4760P]",
 	 .id = "Live",
diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c
index 6a51aed59238..510b776f856d 100644
--- a/sound/pci/emu10k1/emufx.c
+++ b/sound/pci/emu10k1/emufx.c
@@ -1187,8 +1187,8 @@ snd_emu10k1_init_stereo_onoff_control(struct snd_emu10k1_fx8010_control_gpr *ctl
 }
 
 /*
- * Used for emu1010 - conversion from 32-bit capture inputs from HANA
- * to 2 x 16-bit registers in audigy - their values are read via DMA.
+ * Used for emu1010 - conversion from 32-bit capture inputs from the FPGA
+ * to 2 x 16-bit registers in Audigy - their values are read via DMA.
  * Conversion is performed by Audigy DSP instructions of FX8010.
  */
 static int snd_emu10k1_audigy_dsp_convert_32_to_2x16(
@@ -1330,8 +1330,9 @@ static int _snd_emu10k1_audigy_init_efx(struct snd_emu10k1 *emu)
 #define A_ADD_VOLUME_IN(var,vol,input) \
 A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input))
 
-	/* emu1212 DSP 0 and DSP 1 Capture */
 	if (emu->card_capabilities->emu_model) {
+		/* EMU1010 DSP 0 and DSP 1 Capture */
+		// The 24 MSB hold the actual value. We implicitly discard the 16 LSB.
 		if (emu->card_capabilities->ca0108_chip) {
 			/* Note:JCD:No longer bit shift lower 16bits to upper 16bits of 32bit value. */
 			A_OP(icode, &ptr, iMACINT0, A_GPR(tmp), A_C_00000000, A3_EMU32IN(0x0), A_C_00000001);
@@ -1636,8 +1637,11 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input))
 #endif
 
 	if (emu->card_capabilities->emu_model) {
+		/* Capture 16 channels of S32_LE sound. */
 		if (emu->card_capabilities->ca0108_chip) {
 			dev_info(emu->card->dev, "EMU2 inputs on\n");
+			/* Note that the Tina[2] DSPs have 16 more EMU32 inputs which we don't use. */
+
 			for (z = 0; z < 0x10; z++) {
 				snd_emu10k1_audigy_dsp_convert_32_to_2x16( icode, &ptr, tmp, 
 									bit_shifter16,
@@ -1646,7 +1650,7 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input))
 			}
 		} else {
 			dev_info(emu->card->dev, "EMU inputs on\n");
-			/* Capture 16 (originally 8) channels of S32_LE sound */
+			/* Note that the Alice2 DSPs have 6 I2S inputs which we don't use. */
 
 			/*
 			dev_dbg(emu->card->dev, "emufx.c: gpr=0x%x, tmp=0x%x\n",
diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c
index 754d91050af2..3d2ed5e0a59d 100644
--- a/sound/pci/emu10k1/emumixer.c
+++ b/sound/pci/emu10k1/emumixer.c
@@ -346,7 +346,7 @@ static const unsigned int emu1616_output_dst[] = {
 };
 
 /*
- * Data destinations - HANA outputs going to Alice2 (audigy) for
+ * Data destinations - FPGA outputs going to Alice2 (Audigy) for
  *   capture (EMU32 + I2S links)
  * Each destination has an enum mixer control to choose a data source
  */
@@ -367,6 +367,7 @@ static const unsigned int emu1010_input_dst[] = {
 	EMU_DST_ALICE2_EMU32_D,
 	EMU_DST_ALICE2_EMU32_E,
 	EMU_DST_ALICE2_EMU32_F,
+	/* These exist only on rev1 EMU1010 cards. */
 	EMU_DST_ALICE_I2S0_LEFT,
 	EMU_DST_ALICE_I2S0_RIGHT,
 	EMU_DST_ALICE_I2S1_LEFT,
@@ -708,7 +709,7 @@ static int snd_emu1010_internal_clock_put(struct snd_kcontrol *kcontrol,
 			/* 44100 */
 			/* Mute all */
 			snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_MUTE );
-			/* Default fallback clock 48kHz */
+			/* Default fallback clock 44.1kHz */
 			snd_emu1010_fpga_write(emu, EMU_HANA_DEFCLOCK, EMU_HANA_DEFCLOCK_44_1K );
 			/* Word Clock source, Internal 44.1kHz x1 */
 			snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK,
diff --git a/sound/pci/emu10k1/emupcm.c b/sound/pci/emu10k1/emupcm.c
index c2749ad59e10..a91ea0f863d3 100644
--- a/sound/pci/emu10k1/emupcm.c
+++ b/sound/pci/emu10k1/emupcm.c
@@ -326,7 +326,6 @@ static void snd_emu10k1_pcm_init_voice(struct snd_emu10k1 *emu,
 	} else
 		snd_emu10k1_ptr_write(emu, FXRT, voice,
 				      snd_emu10k1_compose_send_routing(send_routing));
-	/* Stop CA */
 	/* Assumption that PT is already 0 so no harm overwriting */
 	snd_emu10k1_ptr_write(emu, PTRX, voice, (send_amount[0] << 8) | send_amount[1]);
 	snd_emu10k1_ptr_write(emu, DSL, voice, end_addr | (send_amount[3] << 24));
@@ -480,9 +479,6 @@ static int snd_emu10k1_efx_playback_prepare(struct snd_pcm_substream *substream)
 	start_addr = epcm->start_addr;
 	end_addr = epcm->start_addr + snd_pcm_lib_buffer_bytes(substream);
 
-	/*
-	 * the kX driver leaves some space between voices
-	 */
 	channel_size = ( end_addr - start_addr ) / NUM_EFX_PLAYBACK;
 
 	snd_emu10k1_pcm_init_voice(emu, 1, 1, epcm->extra,
@@ -1218,9 +1214,7 @@ static int snd_emu10k1_capture_efx_open(struct snd_pcm_substream *substream)
 	runtime->hw.rate_min = runtime->hw.rate_max = 48000;
 	spin_lock_irq(&emu->reg_lock);
 	if (emu->card_capabilities->emu_model) {
-		/*  Nb. of channels has been increased to 16 */
 		/* TODO
-		 * SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE
 		 * SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
 		 * SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
 		 * SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000
@@ -1231,13 +1225,14 @@ static int snd_emu10k1_capture_efx_open(struct snd_pcm_substream *substream)
 		 * Need to add mixer control to fix sample rate
 		 *                 
 		 * There are 32 mono channels of 16bits each.
-		 * 24bit Audio uses 2x channels over 16bit
-		 * 96kHz uses 2x channels over 48kHz
-		 * 192kHz uses 4x channels over 48kHz
-		 * So, for 48kHz 24bit, one has 16 channels
-		 * for 96kHz 24bit, one has 8 channels
-		 * for 192kHz 24bit, one has 4 channels
-		 *
+		 * 24bit Audio uses 2x channels over 16bit,
+		 * 96kHz uses 2x channels over 48kHz,
+		 * 192kHz uses 4x channels over 48kHz.
+		 * So, for 48kHz 24bit, one has 16 channels,
+		 * for 96kHz 24bit, one has 8 channels,
+		 * for 192kHz 24bit, one has 4 channels.
+		 * 1010rev2 and 1616(m) cards have double that,
+		 * but we don't exceed 16 channels anyway.
 		 */
 #if 1
 		switch (emu->emu1010.internal_clock) {
@@ -1459,11 +1454,12 @@ static int snd_emu10k1_pcm_efx_voices_mask_put(struct snd_kcontrol *kcontrol, st
 			nval[idx / 32] |= 1 << (idx % 32);
 			bits++;
 		}
-		
+
+	// Check that the number of requested channels is a power of two
+	// not bigger than the number of available channels.
 	for (idx = 0; idx < nefxb; idx++)
 		if (1 << idx == bits)
 			break;
-	
 	if (idx >= nefxb)
 		return -EINVAL;
 
diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c
index 42b06f2e5552..c60573f14ea8 100644
--- a/sound/pci/emu10k1/io.c
+++ b/sound/pci/emu10k1/io.c
@@ -314,7 +314,6 @@ void snd_emu10k1_voice_intr_enable(struct snd_emu10k1 *emu, unsigned int voicenu
 	unsigned int val;
 
 	spin_lock_irqsave(&emu->emu_lock, flags);
-	/* voice interrupt */
 	if (voicenum >= 32) {
 		outl(CLIEH << 16, emu->port + PTR);
 		val = inl(emu->port + DATA);
@@ -334,7 +333,6 @@ void snd_emu10k1_voice_intr_disable(struct snd_emu10k1 *emu, unsigned int voicen
 	unsigned int val;
 
 	spin_lock_irqsave(&emu->emu_lock, flags);
-	/* voice interrupt */
 	if (voicenum >= 32) {
 		outl(CLIEH << 16, emu->port + PTR);
 		val = inl(emu->port + DATA);
@@ -353,7 +351,6 @@ void snd_emu10k1_voice_intr_ack(struct snd_emu10k1 *emu, unsigned int voicenum)
 	unsigned long flags;
 
 	spin_lock_irqsave(&emu->emu_lock, flags);
-	/* voice interrupt */
 	if (voicenum >= 32) {
 		outl(CLIPH << 16, emu->port + PTR);
 		voicenum = 1 << (voicenum - 32);
@@ -371,7 +368,6 @@ void snd_emu10k1_voice_half_loop_intr_enable(struct snd_emu10k1 *emu, unsigned i
 	unsigned int val;
 
 	spin_lock_irqsave(&emu->emu_lock, flags);
-	/* voice interrupt */
 	if (voicenum >= 32) {
 		outl(HLIEH << 16, emu->port + PTR);
 		val = inl(emu->port + DATA);
@@ -391,7 +387,6 @@ void snd_emu10k1_voice_half_loop_intr_disable(struct snd_emu10k1 *emu, unsigned
 	unsigned int val;
 
 	spin_lock_irqsave(&emu->emu_lock, flags);
-	/* voice interrupt */
 	if (voicenum >= 32) {
 		outl(HLIEH << 16, emu->port + PTR);
 		val = inl(emu->port + DATA);
@@ -410,7 +405,6 @@ void snd_emu10k1_voice_half_loop_intr_ack(struct snd_emu10k1 *emu, unsigned int
 	unsigned long flags;
 
 	spin_lock_irqsave(&emu->emu_lock, flags);
-	/* voice interrupt */
 	if (voicenum >= 32) {
 		outl(HLIPH << 16, emu->port + PTR);
 		voicenum = 1 << (voicenum - 32);
@@ -428,7 +422,6 @@ void snd_emu10k1_voice_set_loop_stop(struct snd_emu10k1 *emu, unsigned int voice
 	unsigned int sol;
 
 	spin_lock_irqsave(&emu->emu_lock, flags);
-	/* voice interrupt */
 	if (voicenum >= 32) {
 		outl(SOLEH << 16, emu->port + PTR);
 		sol = inl(emu->port + DATA);
@@ -448,7 +441,6 @@ void snd_emu10k1_voice_clear_loop_stop(struct snd_emu10k1 *emu, unsigned int voi
 	unsigned int sol;
 
 	spin_lock_irqsave(&emu->emu_lock, flags);
-	/* voice interrupt */
 	if (voicenum >= 32) {
 		outl(SOLEH << 16, emu->port + PTR);
 		sol = inl(emu->port + DATA);
diff --git a/sound/pci/emu10k1/p16v.h b/sound/pci/emu10k1/p16v.h
index 3cdafa311617..9d429ad1feff 100644
--- a/sound/pci/emu10k1/p16v.h
+++ b/sound/pci/emu10k1/p16v.h
@@ -64,7 +64,7 @@
  */
 
 /********************************************************************************************************/
-/* Audigy2 P16V pointer-offset register set, accessed through the PTR2 and DATA2 registers                     */
+/* Audigy2 P16V pointer-offset register set, accessed through the PTR2 and DATA2 registers              */
 /********************************************************************************************************/
                                                                                                                            
 /* The sample rate of the SPDIF outputs is set by modifying a register in the EMU10K2 PTR register A_SPDIF_SAMPLERATE.
diff --git a/sound/pci/emu10k1/p17v.h b/sound/pci/emu10k1/p17v.h
index 3a6568346fad..d4ada1c430c8 100644
--- a/sound/pci/emu10k1/p17v.h
+++ b/sound/pci/emu10k1/p17v.h
@@ -6,8 +6,8 @@
  */
 
 /******************************************************************************/
-/* Audigy2Value Tina (P17V) pointer-offset register set,
- * accessed through the PTR20 and DATA24 registers  */
+/* Audigy2Value Tina (P17V) pointer-offset register set,                      */
+/* accessed through the PTR2 and DATA2 registers                              */
 /******************************************************************************/
 
 /* 00 - 07: Not used */