summaryrefslogtreecommitdiff
path: root/sound/soc
diff options
context:
space:
mode:
authorMark Brown <broonie@kernel.org>2017-11-11 00:30:53 +0300
committerMark Brown <broonie@kernel.org>2017-11-11 00:30:53 +0300
commitc44ff31ae03c0970e1b3cfe1e37f347865a9dc8b (patch)
treed940401ba6bee67ad8e03b6d099e3e797c40600a /sound/soc
parentbd26974f7148d14d432f5c5eb0316e80792b4356 (diff)
parent1c0a7de226660b0306b54aaf2cb52312e74723eb (diff)
downloadlinux-c44ff31ae03c0970e1b3cfe1e37f347865a9dc8b.tar.xz
Merge remote-tracking branch 'asoc/topic/intel' into asoc-next
Diffstat (limited to 'sound/soc')
-rw-r--r--sound/soc/Kconfig3
-rw-r--r--sound/soc/Makefile6
-rw-r--r--sound/soc/codecs/hdac_hdmi.c51
-rw-r--r--sound/soc/intel/Kconfig302
-rw-r--r--sound/soc/intel/Makefile2
-rw-r--r--sound/soc/intel/atom/sst-mfld-platform-compress.c2
-rw-r--r--sound/soc/intel/atom/sst-mfld-platform.h2
-rw-r--r--sound/soc/intel/atom/sst/sst_acpi.c312
-rw-r--r--sound/soc/intel/atom/sst/sst_loader.c1
-rw-r--r--sound/soc/intel/atom/sst/sst_stream.c1
-rw-r--r--sound/soc/intel/boards/Kconfig265
-rw-r--r--sound/soc/intel/boards/bxt_da7219_max98357a.c16
-rw-r--r--sound/soc/intel/boards/bytcht_da7213.c23
-rw-r--r--sound/soc/intel/boards/bytcht_es8316.c27
-rw-r--r--sound/soc/intel/boards/bytcht_nocodec.c10
-rw-r--r--sound/soc/intel/boards/bytcr_rt5640.c118
-rw-r--r--sound/soc/intel/boards/bytcr_rt5651.c297
-rw-r--r--sound/soc/intel/boards/cht_bsw_max98090_ti.c179
-rw-r--r--sound/soc/intel/boards/cht_bsw_rt5645.c128
-rw-r--r--sound/soc/intel/boards/cht_bsw_rt5672.c68
-rw-r--r--sound/soc/intel/boards/kbl_rt5663_max98927.c76
-rw-r--r--sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c1
-rw-r--r--sound/soc/intel/boards/skl_nau88l25_max98357a.c16
-rw-r--r--sound/soc/intel/boards/skl_nau88l25_ssm4567.c16
-rw-r--r--sound/soc/intel/common/Makefile4
-rw-r--r--sound/soc/intel/common/soc-acpi-intel-byt-match.c196
-rw-r--r--sound/soc/intel/common/soc-acpi-intel-cht-match.c194
-rw-r--r--sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c64
-rw-r--r--sound/soc/intel/common/sst-acpi.c36
-rw-r--r--sound/soc/intel/common/sst-acpi.h82
-rw-r--r--sound/soc/intel/common/sst-firmware.c3
-rw-r--r--sound/soc/intel/skylake/skl-messages.c23
-rw-r--r--sound/soc/intel/skylake/skl-pcm.c46
-rw-r--r--sound/soc/intel/skylake/skl-topology.c68
-rw-r--r--sound/soc/intel/skylake/skl-topology.h7
-rw-r--r--sound/soc/intel/skylake/skl.c50
-rw-r--r--sound/soc/intel/skylake/skl.h4
-rw-r--r--sound/soc/soc-acpi.c (renamed from sound/soc/intel/common/sst-match-acpi.c)56
38 files changed, 1617 insertions, 1138 deletions
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index c0abad2067e1..d22758165496 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -36,6 +36,9 @@ config SND_SOC_COMPRESS
config SND_SOC_TOPOLOGY
bool
+config SND_SOC_ACPI
+ tristate
+
# All the supported SoCs
source "sound/soc/adi/Kconfig"
source "sound/soc/amd/Kconfig"
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index bf8c1e2ce0bf..5327f4d6c668 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -15,6 +15,12 @@ ifneq ($(CONFIG_SND_SOC_AC97_BUS),)
snd-soc-core-objs += soc-ac97.o
endif
+ifneq ($(CONFIG_SND_SOC_ACPI),)
+snd-soc-acpi-objs := soc-acpi.o
+endif
+
+obj-$(CONFIG_SND_SOC_ACPI) += snd-soc-acpi.o
+
obj-$(CONFIG_SND_SOC) += snd-soc-core.o
obj-$(CONFIG_SND_SOC) += codecs/
obj-$(CONFIG_SND_SOC) += generic/
diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index e824d47cc22b..f3b4f4dfae6a 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -942,7 +942,8 @@ static int hdac_hdmi_create_pin_port_muxs(struct hdac_ext_device *edev,
if (!se)
return -ENOMEM;
- sprintf(kc_name, "Pin %d port %d Input", pin->nid, port->id);
+ snprintf(kc_name, NAME_SIZE, "Pin %d port %d Input",
+ pin->nid, port->id);
kc->name = devm_kstrdup(&edev->hdac.dev, kc_name, GFP_KERNEL);
if (!kc->name)
return -ENOMEM;
@@ -1452,6 +1453,8 @@ static int hdac_hdmi_parse_and_map_nid(struct hdac_ext_device *edev,
int i, num_nodes;
struct hdac_device *hdac = &edev->hdac;
struct hdac_hdmi_priv *hdmi = edev->private_data;
+ struct hdac_hdmi_cvt *temp_cvt, *cvt_next;
+ struct hdac_hdmi_pin *temp_pin, *pin_next;
int ret;
hdac_hdmi_skl_enable_all_pins(hdac);
@@ -1481,32 +1484,54 @@ static int hdac_hdmi_parse_and_map_nid(struct hdac_ext_device *edev,
case AC_WID_AUD_OUT:
ret = hdac_hdmi_add_cvt(edev, nid);
if (ret < 0)
- return ret;
+ goto free_widgets;
break;
case AC_WID_PIN:
ret = hdac_hdmi_add_pin(edev, nid);
if (ret < 0)
- return ret;
+ goto free_widgets;
break;
}
}
hdac->end_nid = nid;
- if (!hdmi->num_pin || !hdmi->num_cvt)
- return -EIO;
+ if (!hdmi->num_pin || !hdmi->num_cvt) {
+ ret = -EIO;
+ goto free_widgets;
+ }
ret = hdac_hdmi_create_dais(hdac, dais, hdmi, hdmi->num_cvt);
if (ret) {
dev_err(&hdac->dev, "Failed to create dais with err: %d\n",
ret);
- return ret;
+ goto free_widgets;
}
*num_dais = hdmi->num_cvt;
+ ret = hdac_hdmi_init_dai_map(edev);
+ if (ret < 0)
+ goto free_widgets;
+
+ return ret;
+
+free_widgets:
+ list_for_each_entry_safe(temp_cvt, cvt_next, &hdmi->cvt_list, head) {
+ list_del(&temp_cvt->head);
+ kfree(temp_cvt->name);
+ kfree(temp_cvt);
+ }
+
+ list_for_each_entry_safe(temp_pin, pin_next, &hdmi->pin_list, head) {
+ for (i = 0; i < temp_pin->num_ports; i++)
+ temp_pin->ports[i].pin = NULL;
+ kfree(temp_pin->ports);
+ list_del(&temp_pin->head);
+ kfree(temp_pin);
+ }
- return hdac_hdmi_init_dai_map(edev);
+ return ret;
}
static void hdac_hdmi_eld_notify_cb(void *aptr, int port, int pipe)
@@ -1894,6 +1919,9 @@ static void hdac_hdmi_set_chmap(struct hdac_device *hdac, int pcm_idx,
struct hdac_hdmi_pcm *pcm = get_hdmi_pcm_from_id(hdmi, pcm_idx);
struct hdac_hdmi_port *port;
+ if (!pcm)
+ return;
+
if (list_empty(&pcm->port_list))
return;
@@ -1912,6 +1940,9 @@ static bool is_hdac_hdmi_pcm_attached(struct hdac_device *hdac, int pcm_idx)
struct hdac_hdmi_priv *hdmi = edev->private_data;
struct hdac_hdmi_pcm *pcm = get_hdmi_pcm_from_id(hdmi, pcm_idx);
+ if (!pcm)
+ return false;
+
if (list_empty(&pcm->port_list))
return false;
@@ -1925,6 +1956,9 @@ static int hdac_hdmi_get_spk_alloc(struct hdac_device *hdac, int pcm_idx)
struct hdac_hdmi_pcm *pcm = get_hdmi_pcm_from_id(hdmi, pcm_idx);
struct hdac_hdmi_port *port;
+ if (!pcm)
+ return 0;
+
if (list_empty(&pcm->port_list))
return 0;
@@ -1978,6 +2012,9 @@ static int hdac_hdmi_dev_probe(struct hdac_ext_device *edev)
hdmi_priv->chmap.ops.is_pcm_attached = is_hdac_hdmi_pcm_attached;
hdmi_priv->chmap.ops.get_spk_alloc = hdac_hdmi_get_spk_alloc;
+ if (!hdac_id)
+ return -ENODEV;
+
if (hdac_id->driver_data)
hdmi_priv->drv_data =
(struct hdac_hdmi_drv_data *)hdac_id->driver_data;
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index b3c7f554ec30..bb8be10b8437 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -1,19 +1,3 @@
-config SND_MFLD_MACHINE
- tristate "SOC Machine Audio driver for Intel Medfield MID platform"
- depends on INTEL_SCU_IPC
- select SND_SOC_SN95031
- select SND_SST_ATOM_HIFI2_PLATFORM
- select SND_SST_IPC_PCI
- help
- This adds support for ASoC machine driver for Intel(R) MID Medfield platform
- used as alsa device in audio substem in Intel(R) MID devices
- Say Y if you have such a device.
- If unsure select "N".
-
-config SND_SST_ATOM_HIFI2_PLATFORM
- tristate
- select SND_SOC_COMPRESS
-
config SND_SST_IPC
tristate
@@ -27,10 +11,12 @@ config SND_SST_IPC_ACPI
select SND_SOC_INTEL_SST
select IOSF_MBI
+config SND_SOC_INTEL_COMMON
+ tristate
+
config SND_SOC_INTEL_SST
tristate
select SND_SOC_INTEL_SST_ACPI if ACPI
- select SND_SOC_INTEL_SST_MATCH if ACPI
config SND_SOC_INTEL_SST_FIRMWARE
tristate
@@ -39,280 +25,42 @@ config SND_SOC_INTEL_SST_FIRMWARE
config SND_SOC_INTEL_SST_ACPI
tristate
-config SND_SOC_INTEL_SST_MATCH
+config SND_SOC_ACPI_INTEL_MATCH
tristate
+ select SND_SOC_ACPI if ACPI
+
+config SND_SOC_INTEL_SST_TOPLEVEL
+ tristate "Intel ASoC SST drivers"
+ depends on X86 || COMPILE_TEST
+ select SND_SOC_INTEL_MACH
+ select SND_SOC_INTEL_COMMON
config SND_SOC_INTEL_HASWELL
- tristate
+ tristate "Intel ASoC SST driver for Haswell/Broadwell"
+ depends on SND_SOC_INTEL_SST_TOPLEVEL && SND_DMA_SGBUF
+ depends on DMADEVICES
select SND_SOC_INTEL_SST
select SND_SOC_INTEL_SST_FIRMWARE
config SND_SOC_INTEL_BAYTRAIL
- tristate
- select SND_SOC_INTEL_SST
- select SND_SOC_INTEL_SST_FIRMWARE
-
-config SND_SOC_INTEL_HASWELL_MACH
- tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint"
- depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
- depends on DMADEVICES
- select SND_SOC_INTEL_HASWELL
- select SND_SOC_RT5640
- help
- This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell
- Ultrabook platforms.
- Say Y if you have such a device.
- If unsure select "N".
-
-config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
- tristate "ASoC Audio driver for Broxton with DA7219 and MAX98357A in I2S Mode"
- depends on X86 && ACPI && I2C
- select SND_SOC_INTEL_SKYLAKE
- select SND_SOC_DA7219
- select SND_SOC_MAX98357A
- select SND_SOC_DMIC
- select SND_SOC_HDAC_HDMI
- select SND_HDA_DSP_LOADER
- help
- This adds support for ASoC machine driver for Broxton-P platforms
- with DA7219 + MAX98357A I2S audio codec.
- Say Y if you have such a device.
- If unsure select "N".
-
-config SND_SOC_INTEL_BXT_RT298_MACH
- tristate "ASoC Audio driver for Broxton with RT298 I2S mode"
- depends on X86 && ACPI && I2C
- select SND_SOC_INTEL_SKYLAKE
- select SND_SOC_RT298
- select SND_SOC_DMIC
- select SND_SOC_HDAC_HDMI
- select SND_HDA_DSP_LOADER
- help
- This adds support for ASoC machine driver for Broxton platforms
- with RT286 I2S audio codec.
- Say Y if you have such a device.
- If unsure select "N".
-
-config SND_SOC_INTEL_BYT_RT5640_MACH
- tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec"
- depends on X86_INTEL_LPSS && I2C
+ tristate "Intel ASoC SST driver for Baytrail (legacy)"
+ depends on SND_SOC_INTEL_SST_TOPLEVEL
depends on DMADEVICES
- depends on SND_SST_IPC_ACPI = n
- select SND_SOC_INTEL_BAYTRAIL
- select SND_SOC_RT5640
- help
- This adds audio driver for Intel Baytrail platform based boards
- with the RT5640 audio codec. This driver is deprecated, use
- SND_SOC_INTEL_BYTCR_RT5640_MACH instead for better functionality.
-
-config SND_SOC_INTEL_BYT_MAX98090_MACH
- tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec"
- depends on X86_INTEL_LPSS && I2C
- depends on DMADEVICES
- depends on SND_SST_IPC_ACPI = n
- select SND_SOC_INTEL_BAYTRAIL
- select SND_SOC_MAX98090
- help
- This adds audio driver for Intel Baytrail platform based boards
- with the MAX98090 audio codec.
-
-config SND_SOC_INTEL_BDW_RT5677_MACH
- tristate "ASoC Audio driver for Intel Broadwell with RT5677 codec"
- depends on X86_INTEL_LPSS && GPIOLIB && I2C
- depends on DMADEVICES
- select SND_SOC_INTEL_HASWELL
- select SND_SOC_RT5677
- help
- This adds support for Intel Broadwell platform based boards with
- the RT5677 audio codec.
-
-config SND_SOC_INTEL_BROADWELL_MACH
- tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint"
- depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
- depends on DMADEVICES
- select SND_SOC_INTEL_HASWELL
- select SND_SOC_RT286
- help
- This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell
- Ultrabook platforms.
- Say Y if you have such a device.
- If unsure select "N".
-
-config SND_SOC_INTEL_BYTCR_RT5640_MACH
- tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5640 codec"
- depends on X86 && I2C && ACPI
- select SND_SOC_RT5640
- select SND_SST_ATOM_HIFI2_PLATFORM
- select SND_SST_IPC_ACPI
- select SND_SOC_INTEL_SST_MATCH if ACPI
- help
- This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
- platforms with RT5640 audio codec.
- Say Y if you have such a device.
- If unsure select "N".
-
-config SND_SOC_INTEL_BYTCR_RT5651_MACH
- tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5651 codec"
- depends on X86 && I2C && ACPI
- select SND_SOC_RT5651
- select SND_SST_ATOM_HIFI2_PLATFORM
- select SND_SST_IPC_ACPI
- select SND_SOC_INTEL_SST_MATCH if ACPI
- help
- This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
- platforms with RT5651 audio codec.
- Say Y if you have such a device.
- If unsure select "N".
-
-config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
- tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
- select SND_SOC_RT5670
- select SND_SST_ATOM_HIFI2_PLATFORM
- select SND_SST_IPC_ACPI
- select SND_SOC_INTEL_SST_MATCH if ACPI
- help
- This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
- platforms with RT5672 audio codec.
- Say Y if you have such a device.
- If unsure select "N".
-
-config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
- tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5645/5650 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
- select SND_SOC_RT5645
- select SND_SST_ATOM_HIFI2_PLATFORM
- select SND_SST_IPC_ACPI
- select SND_SOC_INTEL_SST_MATCH if ACPI
- help
- This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
- platforms with RT5645/5650 audio codec.
- If unsure select "N".
-
-config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
- tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with MAX98090 & TI codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
- select SND_SOC_MAX98090
- select SND_SOC_TS3A227E
- select SND_SST_ATOM_HIFI2_PLATFORM
- select SND_SST_IPC_ACPI
- select SND_SOC_INTEL_SST_MATCH if ACPI
- help
- This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
- platforms with MAX98090 audio codec it also can support TI jack chip as aux device.
- If unsure select "N".
-
-config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
- tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with DA7212/7213 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
- select SND_SOC_DA7213
- select SND_SST_ATOM_HIFI2_PLATFORM
- select SND_SST_IPC_ACPI
- select SND_SOC_INTEL_SST_MATCH if ACPI
- help
- This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail
- platforms with DA7212/7213 audio codec.
- If unsure select "N".
-
-config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
- tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with ES8316 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
- select SND_SOC_ES8316
- select SND_SST_ATOM_HIFI2_PLATFORM
- select SND_SST_IPC_ACPI
- select SND_SOC_INTEL_SST_MATCH if ACPI
- help
- This adds support for ASoC machine driver for Intel(R) Baytrail &
- Cherrytrail platforms with ES8316 audio codec.
- If unsure select "N".
-
-config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
- tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
- depends on X86_INTEL_LPSS && I2C && ACPI
- select SND_SST_ATOM_HIFI2_PLATFORM
- select SND_SST_IPC_ACPI
- select SND_SOC_INTEL_SST_MATCH if ACPI
- help
- This adds support for ASoC machine driver for the MinnowBoard Max or
- Up boards and provides access to I2S signals on the Low-Speed
- connector
- If unsure select "N".
-
-config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
- tristate "ASoC Audio driver for KBL with RT5663 and MAX98927 in I2S Mode"
- depends on X86_INTEL_LPSS && I2C
select SND_SOC_INTEL_SST
- select SND_SOC_INTEL_SKYLAKE
- select SND_SOC_RT5663
- select SND_SOC_MAX98927
- select SND_SOC_DMIC
- select SND_SOC_HDAC_HDMI
- help
- This adds support for ASoC Onboard Codec I2S machine driver. This will
- create an alsa sound card for RT5663 + MAX98927.
- Say Y if you have such a device.
- If unsure select "N".
+ select SND_SOC_INTEL_SST_FIRMWARE
-config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
- tristate "ASoC Audio driver for KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
- depends on X86_INTEL_LPSS && I2C && SPI
- select SND_SOC_INTEL_SST
- select SND_SOC_INTEL_SKYLAKE
- select SND_SOC_RT5663
- select SND_SOC_RT5514
- select SND_SOC_RT5514_SPI
- select SND_SOC_MAX98927
- select SND_SOC_HDAC_HDMI
- help
- This adds support for ASoC Onboard Codec I2S machine driver. This will
- create an alsa sound card for RT5663 + RT5514 + MAX98927.
- Say Y if you have such a device.
- If unsure select "N".
+config SND_SST_ATOM_HIFI2_PLATFORM
+ tristate "Intel ASoC SST driver for HiFi2 platforms (*field, *trail)"
+ depends on SND_SOC_INTEL_SST_TOPLEVEL && X86
+ select SND_SOC_COMPRESS
config SND_SOC_INTEL_SKYLAKE
- tristate
+ tristate "Intel ASoC SST driver for SKL/BXT/KBL/GLK/CNL"
+ depends on SND_SOC_INTEL_SST_TOPLEVEL && PCI && ACPI
select SND_HDA_EXT_CORE
select SND_HDA_DSP_LOADER
select SND_SOC_TOPOLOGY
select SND_SOC_INTEL_SST
-config SND_SOC_INTEL_SKL_RT286_MACH
- tristate "ASoC Audio driver for SKL with RT286 I2S mode"
- depends on X86 && ACPI && I2C
- select SND_SOC_INTEL_SKYLAKE
- select SND_SOC_RT286
- select SND_SOC_DMIC
- select SND_SOC_HDAC_HDMI
- help
- This adds support for ASoC machine driver for Skylake platforms
- with RT286 I2S audio codec.
- Say Y if you have such a device.
- If unsure select "N".
-
-config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
- tristate "ASoC Audio driver for SKL with NAU88L25 and SSM4567 in I2S Mode"
- depends on X86_INTEL_LPSS && I2C
- select SND_SOC_INTEL_SKYLAKE
- select SND_SOC_NAU8825
- select SND_SOC_SSM4567
- select SND_SOC_DMIC
- select SND_SOC_HDAC_HDMI
- help
- This adds support for ASoC Onboard Codec I2S machine driver. This will
- create an alsa sound card for NAU88L25 + SSM4567.
- Say Y if you have such a device.
- If unsure select "N".
-
-config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
- tristate "ASoC Audio driver for SKL with NAU88L25 and MAX98357A in I2S Mode"
- depends on X86_INTEL_LPSS && I2C
- select SND_SOC_INTEL_SKYLAKE
- select SND_SOC_NAU8825
- select SND_SOC_MAX98357A
- select SND_SOC_DMIC
- select SND_SOC_HDAC_HDMI
- help
- This adds support for ASoC Onboard Codec I2S machine driver. This will
- create an alsa sound card for NAU88L25 + MAX98357A.
- Say Y if you have such a device.
- If unsure select "N".
+# ASoC codec drivers
+source "sound/soc/intel/boards/Kconfig"
diff --git a/sound/soc/intel/Makefile b/sound/soc/intel/Makefile
index 62f37ffffdf0..b973d457e834 100644
--- a/sound/soc/intel/Makefile
+++ b/sound/soc/intel/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
# Core support
-obj-$(CONFIG_SND_SOC_INTEL_SST) += common/
+obj-$(CONFIG_SND_SOC_INTEL_COMMON) += common/
# Platform Support
obj-$(CONFIG_SND_SOC_INTEL_HASWELL) += haswell/
diff --git a/sound/soc/intel/atom/sst-mfld-platform-compress.c b/sound/soc/intel/atom/sst-mfld-platform-compress.c
index 1bead81bb510..1dbcab5a6ff0 100644
--- a/sound/soc/intel/atom/sst-mfld-platform-compress.c
+++ b/sound/soc/intel/atom/sst-mfld-platform-compress.c
@@ -259,7 +259,7 @@ static int sst_platform_compr_set_metadata(struct snd_compr_stream *cstream,
return stream->compr_ops->set_metadata(sst->dev, stream->id, metadata);
}
-struct snd_compr_ops sst_platform_compr_ops = {
+const struct snd_compr_ops sst_platform_compr_ops = {
.open = sst_platform_compr_open,
.free = sst_platform_compr_free,
diff --git a/sound/soc/intel/atom/sst-mfld-platform.h b/sound/soc/intel/atom/sst-mfld-platform.h
index cb32cc7e5ec1..31a58c25472c 100644
--- a/sound/soc/intel/atom/sst-mfld-platform.h
+++ b/sound/soc/intel/atom/sst-mfld-platform.h
@@ -25,7 +25,7 @@
#include "sst-atom-controls.h"
extern struct sst_device *sst;
-extern struct snd_compr_ops sst_platform_compr_ops;
+extern const struct snd_compr_ops sst_platform_compr_ops;
#define SST_MONO 1
#define SST_STEREO 2
diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c
index 0e928d54305d..32d6e02e2104 100644
--- a/sound/soc/intel/atom/sst/sst_acpi.c
+++ b/sound/soc/intel/atom/sst/sst_acpi.c
@@ -23,7 +23,6 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/io.h>
-#include <linux/miscdevice.h>
#include <linux/platform_device.h>
#include <linux/firmware.h>
#include <linux/pm_runtime.h>
@@ -41,9 +40,10 @@
#include <acpi/acpi_bus.h>
#include <asm/cpu_device_id.h>
#include <asm/iosf_mbi.h>
+#include <sound/soc-acpi.h>
+#include <sound/soc-acpi-intel-match.h>
#include "../sst-mfld-platform.h"
#include "../../common/sst-dsp.h"
-#include "../../common/sst-acpi.h"
#include "sst.h"
/* LPE viewpoint addresses */
@@ -239,19 +239,26 @@ static int sst_platform_get_resources(struct intel_sst_drv *ctx)
return 0;
}
+static int is_byt(void)
+{
+ bool status = false;
+ static const struct x86_cpu_id cpu_ids[] = {
+ { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */
+ {}
+ };
+ if (x86_match_cpu(cpu_ids))
+ status = true;
+ return status;
+}
static int is_byt_cr(struct device *dev, bool *bytcr)
{
int status = 0;
if (IS_ENABLED(CONFIG_IOSF_MBI)) {
- static const struct x86_cpu_id cpu_ids[] = {
- { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */
- {}
- };
u32 bios_status;
- if (!x86_match_cpu(cpu_ids) || !iosf_mbi_available()) {
+ if (!is_byt() || !iosf_mbi_available()) {
/* bail silently */
return status;
}
@@ -285,7 +292,7 @@ static int sst_acpi_probe(struct platform_device *pdev)
int ret = 0;
struct intel_sst_drv *ctx;
const struct acpi_device_id *id;
- struct sst_acpi_mach *mach;
+ struct snd_soc_acpi_mach *mach;
struct platform_device *mdev;
struct platform_device *plat_dev;
struct sst_platform_info *pdata;
@@ -297,13 +304,17 @@ static int sst_acpi_probe(struct platform_device *pdev)
return -ENODEV;
dev_dbg(dev, "for %s\n", id->id);
- mach = (struct sst_acpi_mach *)id->driver_data;
- mach = sst_acpi_find_machine(mach);
+ mach = (struct snd_soc_acpi_mach *)id->driver_data;
+ mach = snd_soc_acpi_find_machine(mach);
if (mach == NULL) {
dev_err(dev, "No matching machine driver found\n");
return -ENODEV;
}
+ if (is_byt())
+ mach->pdata = &byt_rvp_platform_data;
+ else
+ mach->pdata = &chv_platform_data;
pdata = mach->pdata;
ret = kstrtouint(id->id, 16, &dev_id);
@@ -381,286 +392,9 @@ static int sst_acpi_remove(struct platform_device *pdev)
return 0;
}
-static unsigned long cht_machine_id;
-
-#define CHT_SURFACE_MACH 1
-#define BYT_THINKPAD_10 2
-
-static int cht_surface_quirk_cb(const struct dmi_system_id *id)
-{
- cht_machine_id = CHT_SURFACE_MACH;
- return 1;
-}
-
-static int byt_thinkpad10_quirk_cb(const struct dmi_system_id *id)
-{
- cht_machine_id = BYT_THINKPAD_10;
- return 1;
-}
-
-
-static const struct dmi_system_id byt_table[] = {
- {
- .callback = byt_thinkpad10_quirk_cb,
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 10"),
- },
- },
- {
- .callback = byt_thinkpad10_quirk_cb,
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Tablet B"),
- },
- },
- {
- .callback = byt_thinkpad10_quirk_cb,
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Miix 2 10"),
- },
- },
- { }
-};
-
-static const struct dmi_system_id cht_table[] = {
- {
- .callback = cht_surface_quirk_cb,
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"),
- },
- },
- { }
-};
-
-
-static struct sst_acpi_mach cht_surface_mach = {
- .id = "10EC5640",
- .drv_name = "cht-bsw-rt5645",
- .fw_filename = "intel/fw_sst_22a8.bin",
- .board = "cht-bsw",
- .pdata = &chv_platform_data,
-};
-
-static struct sst_acpi_mach byt_thinkpad_10 = {
- .id = "10EC5640",
- .drv_name = "cht-bsw-rt5672",
- .fw_filename = "intel/fw_sst_0f28.bin",
- .board = "cht-bsw",
- .pdata = &byt_rvp_platform_data,
-};
-
-static struct sst_acpi_mach *cht_quirk(void *arg)
-{
- struct sst_acpi_mach *mach = arg;
-
- dmi_check_system(cht_table);
-
- if (cht_machine_id == CHT_SURFACE_MACH)
- return &cht_surface_mach;
- else
- return mach;
-}
-
-static struct sst_acpi_mach *byt_quirk(void *arg)
-{
- struct sst_acpi_mach *mach = arg;
-
- dmi_check_system(byt_table);
-
- if (cht_machine_id == BYT_THINKPAD_10)
- return &byt_thinkpad_10;
- else
- return mach;
-}
-
-
-static struct sst_acpi_mach sst_acpi_bytcr[] = {
- {
- .id = "10EC5640",
- .drv_name = "bytcr_rt5640",
- .fw_filename = "intel/fw_sst_0f28.bin",
- .board = "bytcr_rt5640",
- .machine_quirk = byt_quirk,
- .pdata = &byt_rvp_platform_data,
- },
- {
- .id = "10EC5642",
- .drv_name = "bytcr_rt5640",
- .fw_filename = "intel/fw_sst_0f28.bin",
- .board = "bytcr_rt5640",
- .pdata = &byt_rvp_platform_data
- },
- {
- .id = "INTCCFFD",
- .drv_name = "bytcr_rt5640",
- .fw_filename = "intel/fw_sst_0f28.bin",
- .board = "bytcr_rt5640",
- .pdata = &byt_rvp_platform_data
- },
- {
- .id = "10EC5651",
- .drv_name = "bytcr_rt5651",
- .fw_filename = "intel/fw_sst_0f28.bin",
- .board = "bytcr_rt5651",
- .pdata = &byt_rvp_platform_data
- },
- {
- .id = "DLGS7212",
- .drv_name = "bytcht_da7213",
- .fw_filename = "intel/fw_sst_0f28.bin",
- .board = "bytcht_da7213",
- .pdata = &byt_rvp_platform_data
- },
- {
- .id = "DLGS7213",
- .drv_name = "bytcht_da7213",
- .fw_filename = "intel/fw_sst_0f28.bin",
- .board = "bytcht_da7213",
- .pdata = &byt_rvp_platform_data
- },
- /* some Baytrail platforms rely on RT5645, use CHT machine driver */
- {
- .id = "10EC5645",
- .drv_name = "cht-bsw-rt5645",
- .fw_filename = "intel/fw_sst_0f28.bin",
- .board = "cht-bsw",
- .pdata = &byt_rvp_platform_data
- },
- {
- .id = "10EC5648",
- .drv_name = "cht-bsw-rt5645",
- .fw_filename = "intel/fw_sst_0f28.bin",
- .board = "cht-bsw",
- .pdata = &byt_rvp_platform_data
- },
-#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH)
- /*
- * This is always last in the table so that it is selected only when
- * enabled explicitly and there is no codec-related information in SSDT
- */
- {
- .id = "80860F28",
- .drv_name = "bytcht_nocodec",
- .fw_filename = "intel/fw_sst_0f28.bin",
- .board = "bytcht_nocodec",
- .pdata = &byt_rvp_platform_data
- },
-#endif
- {},
-};
-
-/* Cherryview-based platforms: CherryTrail and Braswell */
-static struct sst_acpi_mach sst_acpi_chv[] = {
- {
- .id = "10EC5670",
- .drv_name = "cht-bsw-rt5672",
- .fw_filename = "intel/fw_sst_22a8.bin",
- .board = "cht-bsw",
- .pdata = &chv_platform_data
- },
- {
- .id = "10EC5672",
- .drv_name = "cht-bsw-rt5672",
- .fw_filename = "intel/fw_sst_22a8.bin",
- .board = "cht-bsw",
- .pdata = &chv_platform_data
- },
- {
- .id = "10EC5645",
- .drv_name = "cht-bsw-rt5645",
- .fw_filename = "intel/fw_sst_22a8.bin",
- .board = "cht-bsw",
- .pdata = &chv_platform_data
- },
- {
- .id = "10EC5650",
- .drv_name = "cht-bsw-rt5645",
- .fw_filename = "intel/fw_sst_22a8.bin",
- .board = "cht-bsw",
- .pdata = &chv_platform_data
- },
- {
- .id = "10EC3270",
- .drv_name = "cht-bsw-rt5645",
- .fw_filename = "intel/fw_sst_22a8.bin",
- .board = "cht-bsw",
- .pdata = &chv_platform_data
- },
-
- {
- .id = "193C9890",
- .drv_name = "cht-bsw-max98090",
- .fw_filename = "intel/fw_sst_22a8.bin",
- .board = "cht-bsw",
- .pdata = &chv_platform_data
- },
- {
- .id = "DLGS7212",
- .drv_name = "bytcht_da7213",
- .fw_filename = "intel/fw_sst_22a8.bin",
- .board = "bytcht_da7213",
- .pdata = &chv_platform_data
- },
- {
- .id = "DLGS7213",
- .drv_name = "bytcht_da7213",
- .fw_filename = "intel/fw_sst_22a8.bin",
- .board = "bytcht_da7213",
- .pdata = &chv_platform_data
- },
- {
- .id = "ESSX8316",
- .drv_name = "bytcht_es8316",
- .fw_filename = "intel/fw_sst_22a8.bin",
- .board = "bytcht_es8316",
- .pdata = &chv_platform_data
- },
- /* some CHT-T platforms rely on RT5640, use Baytrail machine driver */
- {
- .id = "10EC5640",
- .drv_name = "bytcr_rt5640",
- .fw_filename = "intel/fw_sst_22a8.bin",
- .board = "bytcr_rt5640",
- .machine_quirk = cht_quirk,
- .pdata = &chv_platform_data
- },
- {
- .id = "10EC3276",
- .drv_name = "bytcr_rt5640",
- .fw_filename = "intel/fw_sst_22a8.bin",
- .board = "bytcr_rt5640",
- .pdata = &chv_platform_data
- },
- /* some CHT-T platforms rely on RT5651, use Baytrail machine driver */
- {
- .id = "10EC5651",
- .drv_name = "bytcr_rt5651",
- .fw_filename = "intel/fw_sst_22a8.bin",
- .board = "bytcr_rt5651",
- .pdata = &chv_platform_data
- },
-#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH)
- /*
- * This is always last in the table so that it is selected only when
- * enabled explicitly and there is no codec-related information in SSDT
- */
- {
- .id = "808622A8",
- .drv_name = "bytcht_nocodec",
- .fw_filename = "intel/fw_sst_22a8.bin",
- .board = "bytcht_nocodec",
- .pdata = &chv_platform_data
- },
-#endif
- {},
-};
-
static const struct acpi_device_id sst_acpi_ids[] = {
- { "80860F28", (unsigned long)&sst_acpi_bytcr},
- { "808622A8", (unsigned long) &sst_acpi_chv},
+ { "80860F28", (unsigned long)&snd_soc_acpi_intel_baytrail_machines},
+ { "808622A8", (unsigned long)&snd_soc_acpi_intel_cherrytrail_machines},
{ },
};
diff --git a/sound/soc/intel/atom/sst/sst_loader.c b/sound/soc/intel/atom/sst/sst_loader.c
index 33917146d9c4..a686eef2cf7f 100644
--- a/sound/soc/intel/atom/sst/sst_loader.c
+++ b/sound/soc/intel/atom/sst/sst_loader.c
@@ -415,7 +415,6 @@ int sst_load_fw(struct intel_sst_drv *sst_drv_ctx)
return ret_val;
}
- BUG_ON(!sst_drv_ctx->fw_in_mem);
block = sst_create_block(sst_drv_ctx, 0, FW_DWNL_ID);
if (block == NULL)
return -ENOMEM;
diff --git a/sound/soc/intel/atom/sst/sst_stream.c b/sound/soc/intel/atom/sst/sst_stream.c
index 83d8dda15233..65e257b17a7e 100644
--- a/sound/soc/intel/atom/sst/sst_stream.c
+++ b/sound/soc/intel/atom/sst/sst_stream.c
@@ -45,7 +45,6 @@ int sst_alloc_stream_mrfld(struct intel_sst_drv *sst_drv_ctx, void *params)
void *data = NULL;
dev_dbg(sst_drv_ctx->dev, "Enter\n");
- BUG_ON(!params);
str_params = (struct snd_sst_params *)params;
memset(&alloc_param, 0, sizeof(alloc_param));
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
new file mode 100644
index 000000000000..6f754708a48c
--- /dev/null
+++ b/sound/soc/intel/boards/Kconfig
@@ -0,0 +1,265 @@
+config SND_SOC_INTEL_MACH
+ tristate "Intel Audio machine drivers"
+ depends on SND_SOC_INTEL_SST_TOPLEVEL
+ select SND_SOC_ACPI_INTEL_MATCH if ACPI
+
+if SND_SOC_INTEL_MACH
+
+config SND_MFLD_MACHINE
+ tristate "SOC Machine Audio driver for Intel Medfield MID platform"
+ depends on INTEL_SCU_IPC
+ select SND_SOC_SN95031
+ depends on SND_SST_ATOM_HIFI2_PLATFORM
+ select SND_SST_IPC_PCI
+ help
+ This adds support for ASoC machine driver for Intel(R) MID Medfield platform
+ used as alsa device in audio substem in Intel(R) MID devices
+ Say Y if you have such a device.
+ If unsure select "N".
+
+config SND_SOC_INTEL_HASWELL_MACH
+ tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint"
+ depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
+ depends on SND_SOC_INTEL_HASWELL
+ select SND_SOC_RT5640
+ help
+ This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell
+ Ultrabook platforms.
+ Say Y if you have such a device.
+ If unsure select "N".
+
+config SND_SOC_INTEL_BDW_RT5677_MACH
+ tristate "ASoC Audio driver for Intel Broadwell with RT5677 codec"
+ depends on X86_INTEL_LPSS && GPIOLIB && I2C
+ depends on SND_SOC_INTEL_HASWELL
+ select SND_SOC_RT5677
+ help
+ This adds support for Intel Broadwell platform based boards with
+ the RT5677 audio codec.
+
+config SND_SOC_INTEL_BROADWELL_MACH
+ tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint"
+ depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
+ depends on SND_SOC_INTEL_HASWELL
+ select SND_SOC_RT286
+ help
+ This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell
+ Ultrabook platforms.
+ Say Y if you have such a device.
+ If unsure select "N".
+
+config SND_SOC_INTEL_BYT_MAX98090_MACH
+ tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec"
+ depends on X86_INTEL_LPSS && I2C
+ depends on SND_SST_IPC_ACPI = n
+ depends on SND_SOC_INTEL_BAYTRAIL
+ select SND_SOC_MAX98090
+ help
+ This adds audio driver for Intel Baytrail platform based boards
+ with the MAX98090 audio codec.
+
+config SND_SOC_INTEL_BYT_RT5640_MACH
+ tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec"
+ depends on X86_INTEL_LPSS && I2C
+ depends on SND_SST_IPC_ACPI = n
+ depends on SND_SOC_INTEL_BAYTRAIL
+ select SND_SOC_RT5640
+ help
+ This adds audio driver for Intel Baytrail platform based boards
+ with the RT5640 audio codec. This driver is deprecated, use
+ SND_SOC_INTEL_BYTCR_RT5640_MACH instead for better functionality.
+
+config SND_SOC_INTEL_BYTCR_RT5640_MACH
+ tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5640 codec"
+ depends on X86 && I2C && ACPI
+ select SND_SOC_RT5640
+ depends on SND_SST_ATOM_HIFI2_PLATFORM
+ select SND_SST_IPC_ACPI
+ help
+ This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
+ platforms with RT5640 audio codec.
+ Say Y if you have such a device.
+ If unsure select "N".
+
+config SND_SOC_INTEL_BYTCR_RT5651_MACH
+ tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5651 codec"
+ depends on X86 && I2C && ACPI
+ select SND_SOC_RT5651
+ depends on SND_SST_ATOM_HIFI2_PLATFORM
+ select SND_SST_IPC_ACPI
+ help
+ This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
+ platforms with RT5651 audio codec.
+ Say Y if you have such a device.
+ If unsure select "N".
+
+config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
+ tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec"
+ depends on X86_INTEL_LPSS && I2C && ACPI
+ select SND_SOC_RT5670
+ depends on SND_SST_ATOM_HIFI2_PLATFORM
+ select SND_SST_IPC_ACPI
+ help
+ This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
+ platforms with RT5672 audio codec.
+ Say Y if you have such a device.
+ If unsure select "N".
+
+config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
+ tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5645/5650 codec"
+ depends on X86_INTEL_LPSS && I2C && ACPI
+ select SND_SOC_RT5645
+ depends on SND_SST_ATOM_HIFI2_PLATFORM
+ select SND_SST_IPC_ACPI
+ help
+ This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
+ platforms with RT5645/5650 audio codec.
+ If unsure select "N".
+
+config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
+ tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with MAX98090 & TI codec"
+ depends on X86_INTEL_LPSS && I2C && ACPI
+ select SND_SOC_MAX98090
+ select SND_SOC_TS3A227E
+ depends on SND_SST_ATOM_HIFI2_PLATFORM
+ select SND_SST_IPC_ACPI
+ help
+ This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
+ platforms with MAX98090 audio codec it also can support TI jack chip as aux device.
+ If unsure select "N".
+
+config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
+ tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with DA7212/7213 codec"
+ depends on X86_INTEL_LPSS && I2C && ACPI
+ select SND_SOC_DA7213
+ depends on SND_SST_ATOM_HIFI2_PLATFORM
+ select SND_SST_IPC_ACPI
+ help
+ This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail
+ platforms with DA7212/7213 audio codec.
+ If unsure select "N".
+
+config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
+ tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with ES8316 codec"
+ depends on X86_INTEL_LPSS && I2C && ACPI
+ select SND_SOC_ES8316
+ depends on SND_SST_ATOM_HIFI2_PLATFORM
+ select SND_SST_IPC_ACPI
+ help
+ This adds support for ASoC machine driver for Intel(R) Baytrail &
+ Cherrytrail platforms with ES8316 audio codec.
+ If unsure select "N".
+
+config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
+ tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
+ depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on SND_SST_ATOM_HIFI2_PLATFORM
+ select SND_SST_IPC_ACPI
+ help
+ This adds support for ASoC machine driver for the MinnowBoard Max or
+ Up boards and provides access to I2S signals on the Low-Speed
+ connector
+ If unsure select "N".
+
+config SND_SOC_INTEL_SKL_RT286_MACH
+ tristate "ASoC Audio driver for SKL with RT286 I2S mode"
+ depends on X86 && ACPI && I2C
+ depends on SND_SOC_INTEL_SKYLAKE
+ select SND_SOC_RT286
+ select SND_SOC_DMIC
+ select SND_SOC_HDAC_HDMI
+ help
+ This adds support for ASoC machine driver for Skylake platforms
+ with RT286 I2S audio codec.
+ Say Y if you have such a device.
+ If unsure select "N".
+
+config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
+ tristate "ASoC Audio driver for SKL with NAU88L25 and SSM4567 in I2S Mode"
+ depends on X86_INTEL_LPSS && I2C
+ depends on SND_SOC_INTEL_SKYLAKE
+ select SND_SOC_NAU8825
+ select SND_SOC_SSM4567
+ select SND_SOC_DMIC
+ select SND_SOC_HDAC_HDMI
+ help
+ This adds support for ASoC Onboard Codec I2S machine driver. This will
+ create an alsa sound card for NAU88L25 + SSM4567.
+ Say Y if you have such a device.
+ If unsure select "N".
+
+config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
+ tristate "ASoC Audio driver for SKL with NAU88L25 and MAX98357A in I2S Mode"
+ depends on X86_INTEL_LPSS && I2C
+ depends on SND_SOC_INTEL_SKYLAKE
+ select SND_SOC_NAU8825
+ select SND_SOC_MAX98357A
+ select SND_SOC_DMIC
+ select SND_SOC_HDAC_HDMI
+ help
+ This adds support for ASoC Onboard Codec I2S machine driver. This will
+ create an alsa sound card for NAU88L25 + MAX98357A.
+ Say Y if you have such a device.
+ If unsure select "N".
+
+config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
+ tristate "ASoC Audio driver for Broxton with DA7219 and MAX98357A in I2S Mode"
+ depends on X86 && ACPI && I2C
+ depends on SND_SOC_INTEL_SKYLAKE
+ select SND_SOC_DA7219
+ select SND_SOC_MAX98357A
+ select SND_SOC_DMIC
+ select SND_SOC_HDAC_HDMI
+ select SND_HDA_DSP_LOADER
+ help
+ This adds support for ASoC machine driver for Broxton-P platforms
+ with DA7219 + MAX98357A I2S audio codec.
+ Say Y if you have such a device.
+ If unsure select "N".
+
+config SND_SOC_INTEL_BXT_RT298_MACH
+ tristate "ASoC Audio driver for Broxton with RT298 I2S mode"
+ depends on X86 && ACPI && I2C
+ depends on SND_SOC_INTEL_SKYLAKE
+ select SND_SOC_RT298
+ select SND_SOC_DMIC
+ select SND_SOC_HDAC_HDMI
+ select SND_HDA_DSP_LOADER
+ help
+ This adds support for ASoC machine driver for Broxton platforms
+ with RT286 I2S audio codec.
+ Say Y if you have such a device.
+ If unsure select "N".
+
+config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
+ tristate "ASoC Audio driver for KBL with RT5663 and MAX98927 in I2S Mode"
+ depends on X86_INTEL_LPSS && I2C
+ select SND_SOC_INTEL_SST
+ depends on SND_SOC_INTEL_SKYLAKE
+ select SND_SOC_RT5663
+ select SND_SOC_MAX98927
+ select SND_SOC_DMIC
+ select SND_SOC_HDAC_HDMI
+ help
+ This adds support for ASoC Onboard Codec I2S machine driver. This will
+ create an alsa sound card for RT5663 + MAX98927.
+ Say Y if you have such a device.
+ If unsure select "N".
+
+config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
+ tristate "ASoC Audio driver for KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
+ depends on X86_INTEL_LPSS && I2C && SPI
+ select SND_SOC_INTEL_SST
+ depends on SND_SOC_INTEL_SKYLAKE
+ select SND_SOC_RT5663
+ select SND_SOC_RT5514
+ select SND_SOC_RT5514_SPI
+ select SND_SOC_MAX98927
+ select SND_SOC_HDAC_HDMI
+ help
+ This adds support for ASoC Onboard Codec I2S machine driver. This will
+ create an alsa sound card for RT5663 + RT5514 + MAX98927.
+ Say Y if you have such a device.
+ If unsure select "N".
+
+endif
diff --git a/sound/soc/intel/boards/bxt_da7219_max98357a.c b/sound/soc/intel/boards/bxt_da7219_max98357a.c
index ce35ec7884d1..f8a91a6f2a17 100644
--- a/sound/soc/intel/boards/bxt_da7219_max98357a.c
+++ b/sound/soc/intel/boards/bxt_da7219_max98357a.c
@@ -55,20 +55,6 @@ enum {
BXT_DPCM_AUDIO_HDMI3_PB,
};
-static inline struct snd_soc_dai *bxt_get_codec_dai(struct snd_soc_card *card)
-{
- struct snd_soc_pcm_runtime *rtd;
-
- list_for_each_entry(rtd, &card->rtd_list, list) {
-
- if (!strncmp(rtd->codec_dai->name, BXT_DIALOG_CODEC_DAI,
- strlen(BXT_DIALOG_CODEC_DAI)))
- return rtd->codec_dai;
- }
-
- return NULL;
-}
-
static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
@@ -77,7 +63,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct snd_soc_card *card = dapm->card;
struct snd_soc_dai *codec_dai;
- codec_dai = bxt_get_codec_dai(card);
+ codec_dai = snd_soc_card_get_codec_dai(card, BXT_DIALOG_CODEC_DAI);
if (!codec_dai) {
dev_err(card->dev, "Codec dai not found; Unable to set/unset codec pll\n");
return -EIO;
diff --git a/sound/soc/intel/boards/bytcht_da7213.c b/sound/soc/intel/boards/bytcht_da7213.c
index 18873e23f404..c4d82ad41bd7 100644
--- a/sound/soc/intel/boards/bytcht_da7213.c
+++ b/sound/soc/intel/boards/bytcht_da7213.c
@@ -27,9 +27,9 @@
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
+#include <sound/soc-acpi.h>
#include "../../codecs/da7213.h"
#include "../atom/sst-atom-controls.h"
-#include "../common/sst-acpi.h"
static const struct snd_kcontrol_new controls[] = {
SOC_DAPM_PIN_SWITCH("Headphone Jack"),
@@ -185,19 +185,11 @@ static struct snd_soc_dai_link dailink[] = {
.dpcm_playback = 1,
.ops = &aif1_ops,
},
- [MERR_DPCM_COMPR] = {
- .name = "Compressed Port",
- .stream_name = "Compress",
- .cpu_dai_name = "compress-cpu-dai",
- .codec_dai_name = "snd-soc-dummy-dai",
- .codec_name = "snd-soc-dummy",
- .platform_name = "sst-mfld-platform",
- },
/* CODEC<->CODEC link */
/* back ends */
{
.name = "SSP2-Codec",
- .id = 1,
+ .id = 0,
.cpu_dai_name = "ssp2-port",
.platform_name = "sst-mfld-platform",
.no_pcm = 1,
@@ -231,19 +223,18 @@ static char codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */
static int bytcht_da7213_probe(struct platform_device *pdev)
{
- int ret_val = 0;
- int i;
struct snd_soc_card *card;
- struct sst_acpi_mach *mach;
+ struct snd_soc_acpi_mach *mach;
const char *i2c_name = NULL;
int dai_index = 0;
+ int ret_val = 0;
+ int i;
mach = (&pdev->dev)->platform_data;
card = &bytcht_da7213_card;
card->dev = &pdev->dev;
/* fix index of codec dai */
- dai_index = MERR_DPCM_COMPR + 1;
for (i = 0; i < ARRAY_SIZE(dailink); i++) {
if (!strcmp(dailink[i].codec_name, "i2c-DLGS7213:00")) {
dai_index = i;
@@ -252,8 +243,8 @@ static int bytcht_da7213_probe(struct platform_device *pdev)
}
/* fixup codec name based on HID */
- i2c_name = sst_acpi_find_name_from_hid(mach->id);
- if (i2c_name != NULL) {
+ i2c_name = snd_soc_acpi_find_name_from_hid(mach->id);
+ if (i2c_name) {
snprintf(codec_name, sizeof(codec_name),
"%s%s", "i2c-", i2c_name);
dailink[dai_index].codec_name = codec_name;
diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c
index 52635462dac6..8088396717e3 100644
--- a/sound/soc/intel/boards/bytcht_es8316.c
+++ b/sound/soc/intel/boards/bytcht_es8316.c
@@ -29,28 +29,14 @@
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
+#include <sound/soc-acpi.h>
#include "../atom/sst-atom-controls.h"
-#include "../common/sst-acpi.h"
#include "../common/sst-dsp.h"
struct byt_cht_es8316_private {
struct clk *mclk;
};
-#define CODEC_DAI1 "ES8316 HiFi"
-
-static inline struct snd_soc_dai *get_codec_dai(struct snd_soc_card *card)
-{
- struct snd_soc_pcm_runtime *rtd;
-
- list_for_each_entry(rtd, &card->rtd_list, list) {
- if (!strncmp(rtd->codec_dai->name, CODEC_DAI1,
- strlen(CODEC_DAI1)))
- return rtd->codec_dai;
- }
- return NULL;
-}
-
static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = {
SND_SOC_DAPM_HP("Headphone", NULL),
@@ -208,22 +194,13 @@ static struct snd_soc_dai_link byt_cht_es8316_dais[] = {
.ops = &byt_cht_es8316_aif1_ops,
},
- [MERR_DPCM_COMPR] = {
- .name = "Compressed Port",
- .stream_name = "Compress",
- .cpu_dai_name = "compress-cpu-dai",
- .codec_dai_name = "snd-soc-dummy-dai",
- .codec_name = "snd-soc-dummy",
- .platform_name = "sst-mfld-platform",
- },
-
/* back ends */
{
/* Only SSP2 has been tested here, so BYT-CR platforms that
* require SSP0 will not work.
*/
.name = "SSP2-Codec",
- .id = 1,
+ .id = 0,
.cpu_dai_name = "ssp2-port",
.platform_name = "sst-mfld-platform",
.no_pcm = 1,
diff --git a/sound/soc/intel/boards/bytcht_nocodec.c b/sound/soc/intel/boards/bytcht_nocodec.c
index 1dd9441806fa..b80ec027a0e8 100644
--- a/sound/soc/intel/boards/bytcht_nocodec.c
+++ b/sound/soc/intel/boards/bytcht_nocodec.c
@@ -133,19 +133,11 @@ static struct snd_soc_dai_link dais[] = {
.dpcm_playback = 1,
.ops = &aif1_ops,
},
- [MERR_DPCM_COMPR] = {
- .name = "Compressed Port",
- .stream_name = "Compress",
- .cpu_dai_name = "compress-cpu-dai",
- .codec_dai_name = "snd-soc-dummy-dai",
- .codec_name = "snd-soc-dummy",
- .platform_name = "sst-mfld-platform",
- },
/* CODEC<->CODEC link */
/* back ends */
{
.name = "SSP2-LowSpeed Connector",
- .id = 1,
+ .id = 0,
.cpu_dai_name = "ssp2-port",
.platform_name = "sst-mfld-platform",
.no_pcm = 1,
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 4a76b099a508..f2c0fc415e52 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -22,19 +22,19 @@
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
#include <linux/acpi.h>
+#include <linux/clk.h>
#include <linux/device.h>
#include <linux/dmi.h>
#include <linux/slab.h>
#include <asm/cpu_device_id.h>
#include <asm/platform_sst_audio.h>
-#include <linux/clk.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/jack.h>
+#include <sound/soc-acpi.h>
#include "../../codecs/rt5640.h"
#include "../atom/sst-atom-controls.h"
-#include "../common/sst-acpi.h"
#include "../common/sst-dsp.h"
enum {
@@ -44,13 +44,13 @@ enum {
BYT_RT5640_IN3_MAP,
};
-#define BYT_RT5640_MAP(quirk) ((quirk) & 0xff)
+#define BYT_RT5640_MAP(quirk) ((quirk) & GENMASK(7, 0))
#define BYT_RT5640_DMIC_EN BIT(16)
#define BYT_RT5640_MONO_SPEAKER BIT(17)
#define BYT_RT5640_DIFF_MIC BIT(18) /* defaut is single-ended */
-#define BYT_RT5640_SSP2_AIF2 BIT(19) /* default is using AIF1 */
-#define BYT_RT5640_SSP0_AIF1 BIT(20)
-#define BYT_RT5640_SSP0_AIF2 BIT(21)
+#define BYT_RT5640_SSP2_AIF2 BIT(19) /* default is using AIF1 */
+#define BYT_RT5640_SSP0_AIF1 BIT(20)
+#define BYT_RT5640_SSP0_AIF2 BIT(21)
#define BYT_RT5640_MCLK_EN BIT(22)
#define BYT_RT5640_MCLK_25MHZ BIT(23)
@@ -145,22 +145,6 @@ static void log_quirks(struct device *dev)
#define BYT_CODEC_DAI1 "rt5640-aif1"
#define BYT_CODEC_DAI2 "rt5640-aif2"
-static inline struct snd_soc_dai *byt_get_codec_dai(struct snd_soc_card *card)
-{
- struct snd_soc_pcm_runtime *rtd;
-
- list_for_each_entry(rtd, &card->rtd_list, list) {
- if (!strncmp(rtd->codec_dai->name, BYT_CODEC_DAI1,
- strlen(BYT_CODEC_DAI1)))
- return rtd->codec_dai;
- if (!strncmp(rtd->codec_dai->name, BYT_CODEC_DAI2,
- strlen(BYT_CODEC_DAI2)))
- return rtd->codec_dai;
-
- }
- return NULL;
-}
-
static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
@@ -170,7 +154,10 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
int ret;
- codec_dai = byt_get_codec_dai(card);
+ codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1);
+ if (!codec_dai)
+ codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI2);
+
if (!codec_dai) {
dev_err(card->dev,
"Codec dai not found; Unable to set platform clock\n");
@@ -178,7 +165,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
}
if (SND_SOC_DAPM_EVENT_ON(event)) {
- if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) {
+ if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) {
ret = clk_prepare_enable(priv->mclk);
if (ret < 0) {
dev_err(card->dev,
@@ -199,7 +186,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
48000 * 512,
SND_SOC_CLOCK_IN);
if (!ret) {
- if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk)
+ if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN)
clk_disable_unprepare(priv->mclk);
}
}
@@ -376,8 +363,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
},
- .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
- BYT_RT5640_MCLK_EN),
+ .driver_data = (void *)(BYT_RT5640_IN1_MAP |
+ BYT_RT5640_MCLK_EN),
},
{
.callback = byt_rt5640_quirk_cb,
@@ -385,12 +372,11 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"),
},
- .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
- BYT_RT5640_MONO_SPEAKER |
- BYT_RT5640_DIFF_MIC |
- BYT_RT5640_SSP0_AIF2 |
- BYT_RT5640_MCLK_EN
- ),
+ .driver_data = (void *)(BYT_RT5640_IN1_MAP |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_DIFF_MIC |
+ BYT_RT5640_SSP0_AIF2 |
+ BYT_RT5640_MCLK_EN),
},
{
.callback = byt_rt5640_quirk_cb,
@@ -398,9 +384,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "DellInc."),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Venue 8 Pro 5830"),
},
- .driver_data = (unsigned long *)(BYT_RT5640_DMIC2_MAP |
- BYT_RT5640_DMIC_EN |
- BYT_RT5640_MCLK_EN),
+ .driver_data = (void *)(BYT_RT5640_DMIC2_MAP |
+ BYT_RT5640_DMIC_EN |
+ BYT_RT5640_MCLK_EN),
},
{
.callback = byt_rt5640_quirk_cb,
@@ -408,8 +394,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP ElitePad 1000 G2"),
},
- .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
- BYT_RT5640_MCLK_EN),
+ .driver_data = (void *)(BYT_RT5640_IN1_MAP |
+ BYT_RT5640_MCLK_EN),
},
{
.callback = byt_rt5640_quirk_cb,
@@ -417,8 +403,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"),
DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"),
},
- .driver_data = (unsigned long *)(BYT_RT5640_DMIC1_MAP |
- BYT_RT5640_DMIC_EN),
+ .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
+ BYT_RT5640_DMIC_EN),
},
{
.callback = byt_rt5640_quirk_cb,
@@ -426,9 +412,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
DMI_MATCH(DMI_BOARD_NAME, "tPAD"),
},
- .driver_data = (unsigned long *)(BYT_RT5640_IN3_MAP |
- BYT_RT5640_MCLK_EN |
- BYT_RT5640_SSP0_AIF1),
+ .driver_data = (void *)(BYT_RT5640_IN3_MAP |
+ BYT_RT5640_MCLK_EN |
+ BYT_RT5640_SSP0_AIF1),
},
{
.callback = byt_rt5640_quirk_cb,
@@ -436,7 +422,7 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"),
},
- .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
+ .driver_data = (void *)(BYT_RT5640_IN1_MAP |
BYT_RT5640_MCLK_EN |
BYT_RT5640_SSP0_AIF1),
@@ -446,9 +432,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
},
- .driver_data = (unsigned long *)(BYT_RT5640_IN3_MAP |
- BYT_RT5640_MCLK_EN |
- BYT_RT5640_SSP0_AIF1),
+ .driver_data = (void *)(BYT_RT5640_IN3_MAP |
+ BYT_RT5640_MCLK_EN |
+ BYT_RT5640_SSP0_AIF1),
},
{}
@@ -456,12 +442,12 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
{
- int ret;
- struct snd_soc_codec *codec = runtime->codec;
struct snd_soc_card *card = runtime->card;
- const struct snd_soc_dapm_route *custom_map;
struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
+ struct snd_soc_codec *codec = runtime->codec;
+ const struct snd_soc_dapm_route *custom_map;
int num_routes;
+ int ret;
card->dapm.idle_bias_off = true;
@@ -549,7 +535,7 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");
snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker");
- if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) {
+ if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) {
/*
* The firmware might enable the clock at
* boot (this information may or may not
@@ -693,18 +679,10 @@ static struct snd_soc_dai_link byt_rt5640_dais[] = {
.dpcm_playback = 1,
.ops = &byt_rt5640_aif1_ops,
},
- [MERR_DPCM_COMPR] = {
- .name = "Baytrail Compressed Port",
- .stream_name = "Baytrail Compress",
- .cpu_dai_name = "compress-cpu-dai",
- .codec_dai_name = "snd-soc-dummy-dai",
- .codec_name = "snd-soc-dummy",
- .platform_name = "sst-mfld-platform",
- },
/* back ends */
{
.name = "SSP2-Codec",
- .id = 1,
+ .id = 0,
.cpu_dai_name = "ssp2-port", /* overwritten for ssp0 routing */
.platform_name = "sst-mfld-platform",
.no_pcm = 1,
@@ -758,12 +736,12 @@ struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */
static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
{
- int ret_val = 0;
- struct sst_acpi_mach *mach;
+ struct byt_rt5640_private *priv;
+ struct snd_soc_acpi_mach *mach;
const char *i2c_name = NULL;
+ int ret_val = 0;
+ int dai_index = 0;
int i;
- int dai_index;
- struct byt_rt5640_private *priv;
is_bytcr = false;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC);
@@ -776,7 +754,6 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
snd_soc_card_set_drvdata(&byt_rt5640_card, priv);
/* fix index of codec dai */
- dai_index = MERR_DPCM_COMPR + 1;
for (i = 0; i < ARRAY_SIZE(byt_rt5640_dais); i++) {
if (!strcmp(byt_rt5640_dais[i].codec_name, "i2c-10EC5640:00")) {
dai_index = i;
@@ -785,8 +762,8 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
}
/* fixup codec name based on HID */
- i2c_name = sst_acpi_find_name_from_hid(mach->id);
- if (i2c_name != NULL) {
+ i2c_name = snd_soc_acpi_find_name_from_hid(mach->id);
+ if (i2c_name) {
snprintf(byt_rt5640_codec_name, sizeof(byt_rt5640_codec_name),
"%s%s", "i2c-", i2c_name);
@@ -819,7 +796,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
/* format specified: 2 64-bit integers */
struct acpi_buffer format = {sizeof("NN"), "NN"};
struct acpi_buffer state = {0, NULL};
- struct sst_acpi_package_context pkg_ctx;
+ struct snd_soc_acpi_package_context pkg_ctx;
bool pkg_found = false;
state.length = sizeof(chan_package);
@@ -831,7 +808,8 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
pkg_ctx.state = &state;
pkg_ctx.data_valid = false;
- pkg_found = sst_acpi_find_package_from_hid(mach->id, &pkg_ctx);
+ pkg_found = snd_soc_acpi_find_package_from_hid(mach->id,
+ &pkg_ctx);
if (pkg_found) {
if (chan_package.aif_value == 1) {
dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n");
@@ -891,7 +869,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
byt_rt5640_cpu_dai_name;
}
- if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && (is_valleyview())) {
+ if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) {
priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
if (IS_ERR(priv->mclk)) {
ret_val = PTR_ERR(priv->mclk);
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 4a3516b38c2c..d955836c6870 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -21,24 +21,124 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/acpi.h>
+#include <linux/clk.h>
#include <linux/device.h>
#include <linux/dmi.h>
#include <linux/slab.h>
+#include <asm/platform_sst_audio.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/jack.h>
+#include <sound/soc-acpi.h>
#include "../../codecs/rt5651.h"
#include "../atom/sst-atom-controls.h"
+enum {
+ BYT_RT5651_DMIC_MAP,
+ BYT_RT5651_IN1_MAP,
+ BYT_RT5651_IN2_MAP,
+};
+
+#define BYT_RT5651_MAP(quirk) ((quirk) & GENMASK(7, 0))
+#define BYT_RT5651_DMIC_EN BIT(16)
+#define BYT_RT5651_MCLK_EN BIT(17)
+#define BYT_RT5651_MCLK_25MHZ BIT(18)
+
+struct byt_rt5651_private {
+ struct clk *mclk;
+ struct snd_soc_jack jack;
+};
+
+static unsigned long byt_rt5651_quirk = BYT_RT5651_DMIC_MAP |
+ BYT_RT5651_DMIC_EN |
+ BYT_RT5651_MCLK_EN;
+
+static void log_quirks(struct device *dev)
+{
+ if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_DMIC_MAP)
+ dev_info(dev, "quirk DMIC_MAP enabled");
+ if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP)
+ dev_info(dev, "quirk IN1_MAP enabled");
+ if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP)
+ dev_info(dev, "quirk IN2_MAP enabled");
+ if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN)
+ dev_info(dev, "quirk DMIC enabled");
+ if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN)
+ dev_info(dev, "quirk MCLK_EN enabled");
+ if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ)
+ dev_info(dev, "quirk MCLK_25MHZ enabled");
+}
+
+#define BYT_CODEC_DAI1 "rt5651-aif1"
+
+static int platform_clock_control(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
+{
+ struct snd_soc_dapm_context *dapm = w->dapm;
+ struct snd_soc_card *card = dapm->card;
+ struct snd_soc_dai *codec_dai;
+ struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card);
+ int ret;
+
+ codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1);
+ if (!codec_dai) {
+ dev_err(card->dev,
+ "Codec dai not found; Unable to set platform clock\n");
+ return -EIO;
+ }
+
+ if (SND_SOC_DAPM_EVENT_ON(event)) {
+ if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
+ ret = clk_prepare_enable(priv->mclk);
+ if (ret < 0) {
+ dev_err(card->dev,
+ "could not configure MCLK state");
+ return ret;
+ }
+ }
+ ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_PLL1,
+ 48000 * 512,
+ SND_SOC_CLOCK_IN);
+ } else {
+ /*
+ * Set codec clock source to internal clock before
+ * turning off the platform clock. Codec needs clock
+ * for Jack detection and button press
+ */
+ ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_RCCLK,
+ 48000 * 512,
+ SND_SOC_CLOCK_IN);
+ if (!ret)
+ if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN)
+ clk_disable_unprepare(priv->mclk);
+ }
+
+ if (ret < 0) {
+ dev_err(card->dev, "can't set codec sysclk: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = {
SND_SOC_DAPM_HP("Headphone", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
SND_SOC_DAPM_MIC("Internal Mic", NULL),
SND_SOC_DAPM_SPK("Speaker", NULL),
+ SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
+ platform_clock_control, SND_SOC_DAPM_PRE_PMU |
+ SND_SOC_DAPM_POST_PMD),
+
};
static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = {
+ {"Headphone", NULL, "Platform Clock"},
+ {"Headset Mic", NULL, "Platform Clock"},
+ {"Internal Mic", NULL, "Platform Clock"},
+ {"Speaker", NULL, "Platform Clock"},
+
{"AIF1 Playback", NULL, "ssp2 Tx"},
{"ssp2 Tx", NULL, "codec_out0"},
{"ssp2 Tx", NULL, "codec_out1"},
@@ -47,38 +147,30 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = {
{"ssp2 Rx", NULL, "AIF1 Capture"},
{"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */
- {"IN2P", NULL, "Headset Mic"},
{"Headphone", NULL, "HPOL"},
{"Headphone", NULL, "HPOR"},
{"Speaker", NULL, "LOUTL"},
{"Speaker", NULL, "LOUTR"},
};
-static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic1_map[] = {
- {"DMIC1", NULL, "Internal Mic"},
-};
-
-static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic2_map[] = {
- {"DMIC2", NULL, "Internal Mic"},
+static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = {
+ {"IN2P", NULL, "Headset Mic"},
+ {"DMIC L1", NULL, "Internal Mic"},
+ {"DMIC R1", NULL, "Internal Mic"},
};
static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = {
{"Internal Mic", NULL, "micbias1"},
+ {"IN2P", NULL, "Headset Mic"},
{"IN1P", NULL, "Internal Mic"},
};
-enum {
- BYT_RT5651_DMIC1_MAP,
- BYT_RT5651_DMIC2_MAP,
- BYT_RT5651_IN1_MAP,
+static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = {
+ {"Internal Mic", NULL, "micbias1"},
+ {"IN1P", NULL, "Headset Mic"},
+ {"IN2P", NULL, "Internal Mic"},
};
-#define BYT_RT5651_MAP(quirk) ((quirk) & 0xff)
-#define BYT_RT5651_DMIC_EN BIT(16)
-
-static unsigned long byt_rt5651_quirk = BYT_RT5651_DMIC1_MAP |
- BYT_RT5651_DMIC_EN;
-
static const struct snd_kcontrol_new byt_rt5651_controls[] = {
SOC_DAPM_PIN_SWITCH("Headphone"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
@@ -86,6 +178,17 @@ static const struct snd_kcontrol_new byt_rt5651_controls[] = {
SOC_DAPM_PIN_SWITCH("Speaker"),
};
+static struct snd_soc_jack_pin bytcr_jack_pins[] = {
+ {
+ .pin = "Headphone",
+ .mask = SND_JACK_HEADPHONE,
+ },
+ {
+ .pin = "Headset Mic",
+ .mask = SND_JACK_MICROPHONE,
+ },
+};
+
static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
@@ -103,9 +206,26 @@ static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream,
return ret;
}
- ret = snd_soc_dai_set_pll(codec_dai, 0, RT5651_PLL1_S_BCLK1,
- params_rate(params) * 50,
- params_rate(params) * 512);
+ if (!(byt_rt5651_quirk & BYT_RT5651_MCLK_EN)) {
+ /* 2x25 bit slots on SSP2 */
+ ret = snd_soc_dai_set_pll(codec_dai, 0,
+ RT5651_PLL1_S_BCLK1,
+ params_rate(params) * 50,
+ params_rate(params) * 512);
+ } else {
+ if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) {
+ ret = snd_soc_dai_set_pll(codec_dai, 0,
+ RT5651_PLL1_S_MCLK,
+ 25000000,
+ params_rate(params) * 512);
+ } else {
+ ret = snd_soc_dai_set_pll(codec_dai, 0,
+ RT5651_PLL1_S_MCLK,
+ 19200000,
+ params_rate(params) * 512);
+ }
+ }
+
if (ret < 0) {
dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
return ret;
@@ -114,33 +234,60 @@ static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream,
return 0;
}
+static int byt_rt5651_quirk_cb(const struct dmi_system_id *id)
+{
+ byt_rt5651_quirk = (unsigned long)id->driver_data;
+ return 1;
+}
+
static const struct dmi_system_id byt_rt5651_quirk_table[] = {
+ {
+ .callback = byt_rt5651_quirk_cb,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"),
+ },
+ .driver_data = (void *)(BYT_RT5651_DMIC_MAP |
+ BYT_RT5651_DMIC_EN),
+ },
+ {
+ .callback = byt_rt5651_quirk_cb,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "KIANO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "KIANO SlimNote 14.2"),
+ },
+ .driver_data = (void *)(BYT_RT5651_IN2_MAP),
+ },
{}
};
static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
{
- int ret;
struct snd_soc_card *card = runtime->card;
+ struct snd_soc_codec *codec = runtime->codec;
+ struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card);
const struct snd_soc_dapm_route *custom_map;
int num_routes;
+ int ret;
card->dapm.idle_bias_off = true;
- dmi_check_system(byt_rt5651_quirk_table);
switch (BYT_RT5651_MAP(byt_rt5651_quirk)) {
case BYT_RT5651_IN1_MAP:
custom_map = byt_rt5651_intmic_in1_map;
num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map);
break;
- case BYT_RT5651_DMIC2_MAP:
- custom_map = byt_rt5651_intmic_dmic2_map;
- num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic2_map);
+ case BYT_RT5651_IN2_MAP:
+ custom_map = byt_rt5651_intmic_in2_map;
+ num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map);
break;
default:
- custom_map = byt_rt5651_intmic_dmic1_map;
- num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic1_map);
+ custom_map = byt_rt5651_intmic_dmic_map;
+ num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map);
}
+ ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes);
+ if (ret)
+ return ret;
ret = snd_soc_add_card_controls(card, byt_rt5651_controls,
ARRAY_SIZE(byt_rt5651_controls));
@@ -151,6 +298,40 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");
snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker");
+ if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
+ /*
+ * The firmware might enable the clock at
+ * boot (this information may or may not
+ * be reflected in the enable clock register).
+ * To change the rate we must disable the clock
+ * first to cover these cases. Due to common
+ * clock framework restrictions that do not allow
+ * to disable a clock that has not been enabled,
+ * we need to enable the clock first.
+ */
+ ret = clk_prepare_enable(priv->mclk);
+ if (!ret)
+ clk_disable_unprepare(priv->mclk);
+
+ if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ)
+ ret = clk_set_rate(priv->mclk, 25000000);
+ else
+ ret = clk_set_rate(priv->mclk, 19200000);
+
+ if (ret)
+ dev_err(card->dev, "unable to set MCLK rate\n");
+ }
+
+ ret = snd_soc_card_jack_new(runtime->card, "Headset",
+ SND_JACK_HEADSET, &priv->jack,
+ bytcr_jack_pins, ARRAY_SIZE(bytcr_jack_pins));
+ if (ret) {
+ dev_err(runtime->dev, "Headset jack creation failed %d\n", ret);
+ return ret;
+ }
+
+ rt5651_set_jack_detect(codec, &priv->jack);
+
return ret;
}
@@ -253,19 +434,11 @@ static struct snd_soc_dai_link byt_rt5651_dais[] = {
.dpcm_playback = 1,
.ops = &byt_rt5651_aif1_ops,
},
- [MERR_DPCM_COMPR] = {
- .name = "Compressed Port",
- .stream_name = "Compress",
- .cpu_dai_name = "compress-cpu-dai",
- .codec_dai_name = "snd-soc-dummy-dai",
- .codec_name = "snd-soc-dummy",
- .platform_name = "sst-mfld-platform",
- },
/* CODEC<->CODEC link */
/* back ends */
{
.name = "SSP2-Codec",
- .id = 1,
+ .id = 0,
.cpu_dai_name = "ssp2-port",
.platform_name = "sst-mfld-platform",
.no_pcm = 1,
@@ -296,13 +469,65 @@ static struct snd_soc_card byt_rt5651_card = {
.fully_routed = true,
};
+static char byt_rt5651_codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */
+
static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
{
+ struct byt_rt5651_private *priv;
+ struct snd_soc_acpi_mach *mach;
+ const char *i2c_name = NULL;
int ret_val = 0;
+ int dai_index = 0;
+ int i;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC);
+ if (!priv)
+ return -ENOMEM;
/* register the soc card */
byt_rt5651_card.dev = &pdev->dev;
+ mach = byt_rt5651_card.dev->platform_data;
+ snd_soc_card_set_drvdata(&byt_rt5651_card, priv);
+
+ /* fix index of codec dai */
+ for (i = 0; i < ARRAY_SIZE(byt_rt5651_dais); i++) {
+ if (!strcmp(byt_rt5651_dais[i].codec_name, "i2c-10EC5651:00")) {
+ dai_index = i;
+ break;
+ }
+ }
+
+ /* fixup codec name based on HID */
+ i2c_name = snd_soc_acpi_find_name_from_hid(mach->id);
+ if (i2c_name) {
+ snprintf(byt_rt5651_codec_name, sizeof(byt_rt5651_codec_name),
+ "%s%s", "i2c-", i2c_name);
+
+ byt_rt5651_dais[dai_index].codec_name = byt_rt5651_codec_name;
+ }
+
+ /* check quirks before creating card */
+ dmi_check_system(byt_rt5651_quirk_table);
+ log_quirks(&pdev->dev);
+
+ if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
+ priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+ if (IS_ERR(priv->mclk)) {
+ dev_err(&pdev->dev,
+ "Failed to get MCLK from pmc_plt_clk_3: %ld\n",
+ PTR_ERR(priv->mclk));
+ /*
+ * Fall back to bit clock usage for -ENOENT (clock not
+ * available likely due to missing dependencies), bail
+ * for all other errors, including -EPROBE_DEFER
+ */
+ if (ret_val != -ENOENT)
+ return ret_val;
+ byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN;
+ }
+ }
+
ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card);
if (ret_val) {
diff --git a/sound/soc/intel/boards/cht_bsw_max98090_ti.c b/sound/soc/intel/boards/cht_bsw_max98090_ti.c
index 455a55af7ad2..d3e1c7e12004 100644
--- a/sound/soc/intel/boards/cht_bsw_max98090_ti.c
+++ b/sound/soc/intel/boards/cht_bsw_max98090_ti.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/acpi.h>
+#include <linux/clk.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
@@ -35,15 +36,48 @@
#define CHT_CODEC_DAI "HiFi"
struct cht_mc_private {
+ struct clk *mclk;
struct snd_soc_jack jack;
bool ts3a227e_present;
};
+static int platform_clock_control(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
+{
+ struct snd_soc_dapm_context *dapm = w->dapm;
+ struct snd_soc_card *card = dapm->card;
+ struct snd_soc_dai *codec_dai;
+ struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
+ int ret;
+
+ codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI);
+ if (!codec_dai) {
+ dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n");
+ return -EIO;
+ }
+
+ if (SND_SOC_DAPM_EVENT_ON(event)) {
+ ret = clk_prepare_enable(ctx->mclk);
+ if (ret < 0) {
+ dev_err(card->dev,
+ "could not configure MCLK state");
+ return ret;
+ }
+ } else {
+ clk_disable_unprepare(ctx->mclk);
+ }
+
+ return 0;
+}
+
static const struct snd_soc_dapm_widget cht_dapm_widgets[] = {
SND_SOC_DAPM_HP("Headphone", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
SND_SOC_DAPM_MIC("Int Mic", NULL),
SND_SOC_DAPM_SPK("Ext Spk", NULL),
+ SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
+ platform_clock_control, SND_SOC_DAPM_PRE_PMU |
+ SND_SOC_DAPM_POST_PMD),
};
static const struct snd_soc_dapm_route cht_audio_map[] = {
@@ -60,6 +94,10 @@ static const struct snd_soc_dapm_route cht_audio_map[] = {
{"codec_in0", NULL, "ssp2 Rx" },
{"codec_in1", NULL, "ssp2 Rx" },
{"ssp2 Rx", NULL, "HiFi Capture"},
+ {"Headphone", NULL, "Platform Clock"},
+ {"Headset Mic", NULL, "Platform Clock"},
+ {"Int Mic", NULL, "Platform Clock"},
+ {"Ext Spk", NULL, "Platform Clock"},
};
static const struct snd_kcontrol_new cht_mc_controls[] = {
@@ -109,6 +147,40 @@ static struct notifier_block cht_jack_nb = {
.notifier_call = cht_ti_jack_event,
};
+static struct snd_soc_jack_pin hs_jack_pins[] = {
+ {
+ .pin = "Headphone",
+ .mask = SND_JACK_HEADPHONE,
+ },
+ {
+ .pin = "Headset Mic",
+ .mask = SND_JACK_MICROPHONE,
+ },
+};
+
+static struct snd_soc_jack_gpio hs_jack_gpios[] = {
+ {
+ .name = "hp",
+ .report = SND_JACK_HEADPHONE | SND_JACK_LINEOUT,
+ .debounce_time = 200,
+ },
+ {
+ .name = "mic",
+ .invert = 1,
+ .report = SND_JACK_MICROPHONE,
+ .debounce_time = 200,
+ },
+};
+
+static const struct acpi_gpio_params hp_gpios = { 0, 0, false };
+static const struct acpi_gpio_params mic_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_max98090_gpios[] = {
+ { "hp-gpios", &hp_gpios, 1 },
+ { "mic-gpios", &mic_gpios, 1 },
+ {},
+};
+
static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
{
int ret;
@@ -116,30 +188,55 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card);
struct snd_soc_jack *jack = &ctx->jack;
- /**
- * TI supports 4 butons headset detection
- * KEY_MEDIA
- * KEY_VOICECOMMAND
- * KEY_VOLUMEUP
- * KEY_VOLUMEDOWN
- */
- if (ctx->ts3a227e_present)
- jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE |
- SND_JACK_BTN_0 | SND_JACK_BTN_1 |
- SND_JACK_BTN_2 | SND_JACK_BTN_3;
- else
- jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE;
+ if (ctx->ts3a227e_present) {
+ /*
+ * The jack has already been created in the
+ * cht_max98090_headset_init() function.
+ */
+ snd_soc_jack_notifier_register(jack, &cht_jack_nb);
+ return 0;
+ }
- ret = snd_soc_card_jack_new(runtime->card, "Headset Jack",
- jack_type, jack, NULL, 0);
+ jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE;
+ ret = snd_soc_card_jack_new(runtime->card, "Headset Jack",
+ jack_type, jack,
+ hs_jack_pins, ARRAY_SIZE(hs_jack_pins));
if (ret) {
dev_err(runtime->dev, "Headset Jack creation failed %d\n", ret);
return ret;
}
- if (ctx->ts3a227e_present)
- snd_soc_jack_notifier_register(jack, &cht_jack_nb);
+ ret = snd_soc_jack_add_gpiods(runtime->card->dev->parent, jack,
+ ARRAY_SIZE(hs_jack_gpios),
+ hs_jack_gpios);
+ if (ret) {
+ /*
+ * flag error but don't bail if jack detect is broken
+ * due to platform issues or bad BIOS/configuration
+ */
+ dev_err(runtime->dev,
+ "jack detection gpios not added, error %d\n", ret);
+ }
+
+ /*
+ * The firmware might enable the clock at
+ * boot (this information may or may not
+ * be reflected in the enable clock register).
+ * To change the rate we must disable the clock
+ * first to cover these cases. Due to common
+ * clock framework restrictions that do not allow
+ * to disable a clock that has not been enabled,
+ * we need to enable the clock first.
+ */
+ ret = clk_prepare_enable(ctx->mclk);
+ if (!ret)
+ clk_disable_unprepare(ctx->mclk);
+
+ ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ);
+
+ if (ret)
+ dev_err(runtime->dev, "unable to set MCLK rate\n");
return ret;
}
@@ -188,8 +285,29 @@ static int cht_max98090_headset_init(struct snd_soc_component *component)
{
struct snd_soc_card *card = component->card;
struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
+ struct snd_soc_jack *jack = &ctx->jack;
+ int jack_type;
+ int ret;
- return ts3a227e_enable_jack_detect(component, &ctx->jack);
+ /*
+ * TI supports 4 butons headset detection
+ * KEY_MEDIA
+ * KEY_VOICECOMMAND
+ * KEY_VOLUMEUP
+ * KEY_VOLUMEDOWN
+ */
+ jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE |
+ SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+ SND_JACK_BTN_2 | SND_JACK_BTN_3;
+
+ ret = snd_soc_card_jack_new(card, "Headset Jack", jack_type,
+ jack, NULL, 0);
+ if (ret) {
+ dev_err(card->dev, "Headset Jack creation failed %d\n", ret);
+ return ret;
+ }
+
+ return ts3a227e_enable_jack_detect(component, jack);
}
static const struct snd_soc_ops cht_aif1_ops = {
@@ -232,18 +350,10 @@ static struct snd_soc_dai_link cht_dailink[] = {
.dpcm_playback = 1,
.ops = &cht_aif1_ops,
},
- [MERR_DPCM_COMPR] = {
- .name = "Compressed Port",
- .stream_name = "Compress",
- .cpu_dai_name = "compress-cpu-dai",
- .codec_dai_name = "snd-soc-dummy-dai",
- .codec_name = "snd-soc-dummy",
- .platform_name = "sst-mfld-platform",
- },
/* back ends */
{
.name = "SSP2-Codec",
- .id = 1,
+ .id = 0,
.cpu_dai_name = "ssp2-port",
.platform_name = "sst-mfld-platform",
.no_pcm = 1,
@@ -277,6 +387,7 @@ static struct snd_soc_card snd_soc_card_cht = {
static int snd_cht_mc_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
int ret_val = 0;
struct cht_mc_private *drv;
@@ -289,11 +400,25 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
/* no need probe TI jack detection chip */
snd_soc_card_cht.aux_dev = NULL;
snd_soc_card_cht.num_aux_devs = 0;
+
+ ret_val = devm_acpi_dev_add_driver_gpios(dev->parent,
+ acpi_max98090_gpios);
+ if (ret_val)
+ dev_dbg(dev, "Unable to add GPIO mapping table\n");
}
/* register the soc card */
snd_soc_card_cht.dev = &pdev->dev;
snd_soc_card_set_drvdata(&snd_soc_card_cht, drv);
+
+ drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+ if (IS_ERR(drv->mclk)) {
+ dev_err(&pdev->dev,
+ "Failed to get MCLK from pmc_plt_clk_3: %ld\n",
+ PTR_ERR(drv->mclk));
+ return PTR_ERR(drv->mclk);
+ }
+
ret_val = devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_cht);
if (ret_val) {
dev_err(&pdev->dev,
diff --git a/sound/soc/intel/boards/cht_bsw_rt5645.c b/sound/soc/intel/boards/cht_bsw_rt5645.c
index 5bcde01d15e6..18d129caa974 100644
--- a/sound/soc/intel/boards/cht_bsw_rt5645.c
+++ b/sound/soc/intel/boards/cht_bsw_rt5645.c
@@ -21,20 +21,20 @@
*/
#include <linux/module.h>
-#include <linux/acpi.h>
#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/clk.h>
#include <linux/dmi.h>
#include <linux/slab.h>
#include <asm/cpu_device_id.h>
#include <asm/platform_sst_audio.h>
-#include <linux/clk.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/jack.h>
+#include <sound/soc-acpi.h>
#include "../../codecs/rt5645.h"
#include "../atom/sst-atom-controls.h"
-#include "../common/sst-acpi.h"
#define CHT_PLAT_CLK_3_HZ 19200000
#define CHT_CODEC_DAI1 "rt5645-aif1"
@@ -53,7 +53,7 @@ struct cht_mc_private {
struct clk *mclk;
};
-#define CHT_RT5645_MAP(quirk) ((quirk) & 0xff)
+#define CHT_RT5645_MAP(quirk) ((quirk) & GENMASK(7, 0))
#define CHT_RT5645_SSP2_AIF2 BIT(16) /* default is using AIF1 */
#define CHT_RT5645_SSP0_AIF1 BIT(17)
#define CHT_RT5645_SSP0_AIF2 BIT(18)
@@ -70,21 +70,6 @@ static void log_quirks(struct device *dev)
dev_info(dev, "quirk SSP0_AIF2 enabled");
}
-static inline struct snd_soc_dai *cht_get_codec_dai(struct snd_soc_card *card)
-{
- struct snd_soc_pcm_runtime *rtd;
-
- list_for_each_entry(rtd, &card->rtd_list, list) {
- if (!strncmp(rtd->codec_dai->name, CHT_CODEC_DAI1,
- strlen(CHT_CODEC_DAI1)))
- return rtd->codec_dai;
- if (!strncmp(rtd->codec_dai->name, CHT_CODEC_DAI2,
- strlen(CHT_CODEC_DAI2)))
- return rtd->codec_dai;
- }
- return NULL;
-}
-
static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
@@ -94,20 +79,21 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
int ret;
- codec_dai = cht_get_codec_dai(card);
+ codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI1);
+ if (!codec_dai)
+ codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI2);
+
if (!codec_dai) {
dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n");
return -EIO;
}
if (SND_SOC_DAPM_EVENT_ON(event)) {
- if (ctx->mclk) {
- ret = clk_prepare_enable(ctx->mclk);
- if (ret < 0) {
- dev_err(card->dev,
- "could not configure MCLK state");
- return ret;
- }
+ ret = clk_prepare_enable(ctx->mclk);
+ if (ret < 0) {
+ dev_err(card->dev,
+ "could not configure MCLK state");
+ return ret;
}
} else {
/* Set codec sysclk source to its internal clock because codec PLL will
@@ -122,8 +108,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
return ret;
}
- if (ctx->mclk)
- clk_disable_unprepare(ctx->mclk);
+ clk_disable_unprepare(ctx->mclk);
}
return 0;
@@ -258,11 +243,11 @@ static const struct dmi_system_id cht_rt5645_quirk_table[] = {
static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
{
- int ret;
- int jack_type;
- struct snd_soc_codec *codec = runtime->codec;
struct snd_soc_card *card = runtime->card;
struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card);
+ struct snd_soc_codec *codec = runtime->codec;
+ int jack_type;
+ int ret;
if ((cht_rt5645_quirk & CHT_RT5645_SSP2_AIF2) ||
(cht_rt5645_quirk & CHT_RT5645_SSP0_AIF2)) {
@@ -320,26 +305,26 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
rt5645_set_jack_detect(codec, &ctx->jack, &ctx->jack, &ctx->jack);
- if (ctx->mclk) {
- /*
- * The firmware might enable the clock at
- * boot (this information may or may not
- * be reflected in the enable clock register).
- * To change the rate we must disable the clock
- * first to cover these cases. Due to common
- * clock framework restrictions that do not allow
- * to disable a clock that has not been enabled,
- * we need to enable the clock first.
- */
- ret = clk_prepare_enable(ctx->mclk);
- if (!ret)
- clk_disable_unprepare(ctx->mclk);
- ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ);
+ /*
+ * The firmware might enable the clock at
+ * boot (this information may or may not
+ * be reflected in the enable clock register).
+ * To change the rate we must disable the clock
+ * first to cover these cases. Due to common
+ * clock framework restrictions that do not allow
+ * to disable a clock that has not been enabled,
+ * we need to enable the clock first.
+ */
+ ret = clk_prepare_enable(ctx->mclk);
+ if (!ret)
+ clk_disable_unprepare(ctx->mclk);
+
+ ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ);
+
+ if (ret)
+ dev_err(runtime->dev, "unable to set MCLK rate\n");
- if (ret)
- dev_err(runtime->dev, "unable to set MCLK rate\n");
- }
return ret;
}
@@ -460,19 +445,11 @@ static struct snd_soc_dai_link cht_dailink[] = {
.dpcm_playback = 1,
.ops = &cht_aif1_ops,
},
- [MERR_DPCM_COMPR] = {
- .name = "Compressed Port",
- .stream_name = "Compress",
- .cpu_dai_name = "compress-cpu-dai",
- .codec_dai_name = "snd-soc-dummy-dai",
- .codec_name = "snd-soc-dummy",
- .platform_name = "sst-mfld-platform",
- },
/* CODEC<->CODEC link */
/* back ends */
{
.name = "SSP2-Codec",
- .id = 1,
+ .id = 0,
.cpu_dai_name = "ssp2-port",
.platform_name = "sst-mfld-platform",
.no_pcm = 1,
@@ -545,15 +522,15 @@ struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */
static int snd_cht_mc_probe(struct platform_device *pdev)
{
- int ret_val = 0;
- int i;
- struct cht_mc_private *drv;
struct snd_soc_card *card = snd_soc_cards[0].soc_card;
- struct sst_acpi_mach *mach;
+ struct snd_soc_acpi_mach *mach;
+ struct cht_mc_private *drv;
const char *i2c_name = NULL;
- int dai_index = 0;
bool found = false;
bool is_bytcr = false;
+ int dai_index = 0;
+ int ret_val = 0;
+ int i;
drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_ATOMIC);
if (!drv)
@@ -589,8 +566,8 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
}
/* fixup codec name based on HID */
- i2c_name = sst_acpi_find_name_from_hid(mach->id);
- if (i2c_name != NULL) {
+ i2c_name = snd_soc_acpi_find_name_from_hid(mach->id);
+ if (i2c_name) {
snprintf(cht_rt5645_codec_name, sizeof(cht_rt5645_codec_name),
"%s%s", "i2c-", i2c_name);
cht_dailink[dai_index].codec_name = cht_rt5645_codec_name;
@@ -622,7 +599,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
/* format specified: 2 64-bit integers */
struct acpi_buffer format = {sizeof("NN"), "NN"};
struct acpi_buffer state = {0, NULL};
- struct sst_acpi_package_context pkg_ctx;
+ struct snd_soc_acpi_package_context pkg_ctx;
bool pkg_found = false;
state.length = sizeof(chan_package);
@@ -634,7 +611,8 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
pkg_ctx.state = &state;
pkg_ctx.data_valid = false;
- pkg_found = sst_acpi_find_package_from_hid(mach->id, &pkg_ctx);
+ pkg_found = snd_soc_acpi_find_package_from_hid(mach->id,
+ &pkg_ctx);
if (pkg_found) {
if (chan_package.aif_value == 1) {
dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n");
@@ -682,14 +660,12 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
cht_rt5645_cpu_dai_name;
}
- if (is_valleyview()) {
- drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
- if (IS_ERR(drv->mclk)) {
- dev_err(&pdev->dev,
- "Failed to get MCLK from pmc_plt_clk_3: %ld\n",
- PTR_ERR(drv->mclk));
- return PTR_ERR(drv->mclk);
- }
+ drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+ if (IS_ERR(drv->mclk)) {
+ dev_err(&pdev->dev,
+ "Failed to get MCLK from pmc_plt_clk_3: %ld\n",
+ PTR_ERR(drv->mclk));
+ return PTR_ERR(drv->mclk);
}
snd_soc_card_set_drvdata(card, drv);
diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c
index f597d5582223..f8f21eee9b2d 100644
--- a/sound/soc/intel/boards/cht_bsw_rt5672.c
+++ b/sound/soc/intel/boards/cht_bsw_rt5672.c
@@ -20,14 +20,14 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/clk.h>
-#include <asm/cpu_device_id.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/jack.h>
+#include <sound/soc-acpi.h>
#include "../../codecs/rt5670.h"
#include "../atom/sst-atom-controls.h"
-#include "../common/sst-acpi.h"
+
/* The platform clock #3 outputs 19.2Mhz clock to codec as I2S MCLK */
#define CHT_PLAT_CLK_3_HZ 19200000
@@ -51,18 +51,6 @@ static struct snd_soc_jack_pin cht_bsw_headset_pins[] = {
},
};
-static inline struct snd_soc_dai *cht_get_codec_dai(struct snd_soc_card *card)
-{
- struct snd_soc_pcm_runtime *rtd;
-
- list_for_each_entry(rtd, &card->rtd_list, list) {
- if (!strncmp(rtd->codec_dai->name, CHT_CODEC_DAI,
- strlen(CHT_CODEC_DAI)))
- return rtd->codec_dai;
- }
- return NULL;
-}
-
static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
@@ -72,7 +60,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
int ret;
- codec_dai = cht_get_codec_dai(card);
+ codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI);
if (!codec_dai) {
dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n");
return -EIO;
@@ -315,20 +303,12 @@ static struct snd_soc_dai_link cht_dailink[] = {
.dpcm_playback = 1,
.ops = &cht_aif1_ops,
},
- [MERR_DPCM_COMPR] = {
- .name = "Compressed Port",
- .stream_name = "Compress",
- .cpu_dai_name = "compress-cpu-dai",
- .codec_dai_name = "snd-soc-dummy-dai",
- .codec_name = "snd-soc-dummy",
- .platform_name = "sst-mfld-platform",
- },
/* Back End DAI links */
{
/* SSP2 - Codec */
.name = "SSP2-Codec",
- .id = 1,
+ .id = 0,
.cpu_dai_name = "ssp2-port",
.platform_name = "sst-mfld-platform",
.no_pcm = 1,
@@ -348,9 +328,11 @@ static struct snd_soc_dai_link cht_dailink[] = {
static int cht_suspend_pre(struct snd_soc_card *card)
{
struct snd_soc_component *component;
+ struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
list_for_each_entry(component, &card->component_dev_list, card_list) {
- if (!strcmp(component->name, "i2c-10EC5670:00")) {
+ if (!strncmp(component->name,
+ ctx->codec_name, sizeof(ctx->codec_name))) {
struct snd_soc_codec *codec = snd_soc_component_to_codec(component);
dev_dbg(codec->dev, "disabling jack detect before going to suspend.\n");
@@ -364,9 +346,11 @@ static int cht_suspend_pre(struct snd_soc_card *card)
static int cht_resume_post(struct snd_soc_card *card)
{
struct snd_soc_component *component;
+ struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
list_for_each_entry(component, &card->component_dev_list, card_list) {
- if (!strcmp(component->name, "i2c-10EC5670:00")) {
+ if (!strncmp(component->name,
+ ctx->codec_name, sizeof(ctx->codec_name))) {
struct snd_soc_codec *codec = snd_soc_component_to_codec(component);
dev_dbg(codec->dev, "enabling jack detect for resume.\n");
@@ -380,7 +364,7 @@ static int cht_resume_post(struct snd_soc_card *card)
/* SoC card */
static struct snd_soc_card snd_soc_card_cht = {
- .name = "cherrytrailcraudio",
+ .name = "cht-bsw-rt5672",
.owner = THIS_MODULE,
.dai_link = cht_dailink,
.num_links = ARRAY_SIZE(cht_dailink),
@@ -394,25 +378,13 @@ static struct snd_soc_card snd_soc_card_cht = {
.resume_post = cht_resume_post,
};
-static bool is_valleyview(void)
-{
- static const struct x86_cpu_id cpu_ids[] = {
- { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */
- {}
- };
-
- if (!x86_match_cpu(cpu_ids))
- return false;
- return true;
-}
-
#define RT5672_I2C_DEFAULT "i2c-10EC5670:00"
static int snd_cht_mc_probe(struct platform_device *pdev)
{
int ret_val = 0;
struct cht_mc_private *drv;
- struct sst_acpi_mach *mach = pdev->dev.platform_data;
+ struct snd_soc_acpi_mach *mach = pdev->dev.platform_data;
const char *i2c_name;
int i;
@@ -424,7 +396,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
/* fixup codec name based on HID */
if (mach) {
- i2c_name = sst_acpi_find_name_from_hid(mach->id);
+ i2c_name = snd_soc_acpi_find_name_from_hid(mach->id);
if (i2c_name) {
snprintf(drv->codec_name, sizeof(drv->codec_name),
"i2c-%s", i2c_name);
@@ -439,14 +411,12 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
}
}
- if (is_valleyview()) {
- drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
- if (IS_ERR(drv->mclk)) {
- dev_err(&pdev->dev,
- "Failed to get MCLK from pmc_plt_clk_3: %ld\n",
- PTR_ERR(drv->mclk));
- return PTR_ERR(drv->mclk);
- }
+ drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+ if (IS_ERR(drv->mclk)) {
+ dev_err(&pdev->dev,
+ "Failed to get MCLK from pmc_plt_clk_3: %ld\n",
+ PTR_ERR(drv->mclk));
+ return PTR_ERR(drv->mclk);
}
snd_soc_card_set_drvdata(&snd_soc_card_cht, drv);
diff --git a/sound/soc/intel/boards/kbl_rt5663_max98927.c b/sound/soc/intel/boards/kbl_rt5663_max98927.c
index 7f7607420706..6f9a8bcf20f3 100644
--- a/sound/soc/intel/boards/kbl_rt5663_max98927.c
+++ b/sound/soc/intel/boards/kbl_rt5663_max98927.c
@@ -17,6 +17,7 @@
* GNU General Public License for more details.
*/
+#include <linux/input.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <sound/core.h>
@@ -208,6 +209,7 @@ static int kabylake_rt5663_codec_init(struct snd_soc_pcm_runtime *rtd)
int ret;
struct kbl_rt5663_private *ctx = snd_soc_card_get_drvdata(rtd->card);
struct snd_soc_codec *codec = rtd->codec;
+ struct snd_soc_jack *jack;
/*
* Headset buttons map to the google Reference headset.
@@ -221,6 +223,13 @@ static int kabylake_rt5663_codec_init(struct snd_soc_pcm_runtime *rtd)
dev_err(rtd->dev, "Headset Jack creation failed %d\n", ret);
return ret;
}
+
+ jack = &ctx->kabylake_headset;
+ snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_MEDIA);
+ snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+ snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+ snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+
rt5663_set_jack_detect(codec, &ctx->kabylake_headset);
return ret;
}
@@ -341,13 +350,28 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd,
struct snd_interval *channels = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_CHANNELS);
struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+ struct snd_soc_dpcm *dpcm = container_of(
+ params, struct snd_soc_dpcm, hw_params);
+ struct snd_soc_dai_link *fe_dai_link = dpcm->fe->dai_link;
+ struct snd_soc_dai_link *be_dai_link = dpcm->be->dai_link;
- /* The ADSP will convert the FE rate to 48k, stereo */
- rate->min = rate->max = 48000;
- channels->min = channels->max = 2;
- /* set SSP1 to 24 bit */
- snd_mask_none(fmt);
- snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE);
+ /*
+ * The ADSP will convert the FE rate to 48k, stereo, 24 bit
+ */
+ if (!strcmp(fe_dai_link->name, "Kbl Audio Port") ||
+ !strcmp(fe_dai_link->name, "Kbl Audio Headset Playback") ||
+ !strcmp(fe_dai_link->name, "Kbl Audio Capture Port")) {
+ rate->min = rate->max = 48000;
+ channels->min = channels->max = 2;
+ snd_mask_none(fmt);
+ snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE);
+ }
+ /*
+ * The speaker on the SSP0 supports S16_LE and not S24_LE.
+ * thus changing the mask here
+ */
+ if (!strcmp(be_dai_link->name, "SSP0-Codec"))
+ snd_mask_set(fmt, SNDRV_PCM_FORMAT_S16_LE);
return 0;
}
@@ -390,6 +414,43 @@ static int kabylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd,
return 0;
}
+static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ int ret = 0, j;
+
+ for (j = 0; j < rtd->num_codecs; j++) {
+ struct snd_soc_dai *codec_dai = rtd->codec_dais[j];
+
+ if (!strcmp(codec_dai->component->name, MAXIM_DEV0_NAME)) {
+ /*
+ * Use channel 4 and 5 for the first amp
+ */
+ ret = snd_soc_dai_set_tdm_slot(codec_dai, 0x30, 3, 8, 16);
+ if (ret < 0) {
+ dev_err(rtd->dev, "set TDM slot err:%d\n", ret);
+ return ret;
+ }
+ }
+ if (!strcmp(codec_dai->component->name, MAXIM_DEV1_NAME)) {
+ /*
+ * Use channel 6 and 7 for the second amp
+ */
+ ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xC0, 3, 8, 16);
+ if (ret < 0) {
+ dev_err(rtd->dev, "set TDM slot err:%d\n", ret);
+ return ret;
+ }
+ }
+ }
+ return ret;
+}
+
+static struct snd_soc_ops kabylake_ssp0_ops = {
+ .hw_params = kabylake_ssp0_hw_params,
+};
+
static unsigned int channels_dmic[] = {
2, 4,
};
@@ -593,12 +654,13 @@ static struct snd_soc_dai_link kabylake_dais[] = {
.no_pcm = 1,
.codecs = max98927_codec_components,
.num_codecs = ARRAY_SIZE(max98927_codec_components),
- .dai_fmt = SND_SOC_DAIFMT_I2S |
+ .dai_fmt = SND_SOC_DAIFMT_DSP_B |
SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS,
.ignore_pmdown_time = 1,
.be_hw_params_fixup = kabylake_ssp_fixup,
.dpcm_playback = 1,
+ .ops = &kabylake_ssp0_ops,
},
{
/* SSP1 - Codec */
diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
index 69ab55956492..6072164f2d43 100644
--- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
+++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
@@ -302,6 +302,7 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd,
* The ADSP will convert the FE rate to 48k, stereo, 24 bit
*/
if (!strcmp(fe_dai_link->name, "Kbl Audio Port") ||
+ !strcmp(fe_dai_link->name, "Kbl Audio Headset Playback") ||
!strcmp(fe_dai_link->name, "Kbl Audio Capture Port")) {
rate->min = rate->max = 48000;
channels->min = channels->max = 2;
diff --git a/sound/soc/intel/boards/skl_nau88l25_max98357a.c b/sound/soc/intel/boards/skl_nau88l25_max98357a.c
index 5ed0aa27b467..1b5a689dc99b 100644
--- a/sound/soc/intel/boards/skl_nau88l25_max98357a.c
+++ b/sound/soc/intel/boards/skl_nau88l25_max98357a.c
@@ -54,20 +54,6 @@ enum {
SKL_DPCM_AUDIO_HDMI3_PB,
};
-static inline struct snd_soc_dai *skl_get_codec_dai(struct snd_soc_card *card)
-{
- struct snd_soc_pcm_runtime *rtd;
-
- list_for_each_entry(rtd, &card->rtd_list, list) {
-
- if (!strncmp(rtd->codec_dai->name, SKL_NUVOTON_CODEC_DAI,
- strlen(SKL_NUVOTON_CODEC_DAI)))
- return rtd->codec_dai;
- }
-
- return NULL;
-}
-
static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
@@ -76,7 +62,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct snd_soc_dai *codec_dai;
int ret;
- codec_dai = skl_get_codec_dai(card);
+ codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI);
if (!codec_dai) {
dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n");
return -EIO;
diff --git a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c
index 01b8b140bb08..7bea4bc77481 100644
--- a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c
+++ b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c
@@ -57,20 +57,6 @@ enum {
SKL_DPCM_AUDIO_HDMI3_PB,
};
-static inline struct snd_soc_dai *skl_get_codec_dai(struct snd_soc_card *card)
-{
- struct snd_soc_pcm_runtime *rtd;
-
- list_for_each_entry(rtd, &card->rtd_list, list) {
-
- if (!strncmp(rtd->codec_dai->name, SKL_NUVOTON_CODEC_DAI,
- strlen(SKL_NUVOTON_CODEC_DAI)))
- return rtd->codec_dai;
- }
-
- return NULL;
-}
-
static const struct snd_kcontrol_new skylake_controls[] = {
SOC_DAPM_PIN_SWITCH("Headphone Jack"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
@@ -86,7 +72,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct snd_soc_dai *codec_dai;
int ret;
- codec_dai = skl_get_codec_dai(card);
+ codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI);
if (!codec_dai) {
dev_err(card->dev, "Codec dai not found\n");
return -EIO;
diff --git a/sound/soc/intel/common/Makefile b/sound/soc/intel/common/Makefile
index 0e029f354f6b..7379d8830c39 100644
--- a/sound/soc/intel/common/Makefile
+++ b/sound/soc/intel/common/Makefile
@@ -1,11 +1,11 @@
# SPDX-License-Identifier: GPL-2.0
snd-soc-sst-dsp-objs := sst-dsp.o
snd-soc-sst-acpi-objs := sst-acpi.o
-snd-soc-sst-match-objs := sst-match-acpi.o
snd-soc-sst-ipc-objs := sst-ipc.o
snd-soc-sst-firmware-objs := sst-firmware.o
+snd-soc-acpi-intel-match-objs := soc-acpi-intel-byt-match.o soc-acpi-intel-cht-match.o soc-acpi-intel-hsw-bdw-match.o
obj-$(CONFIG_SND_SOC_INTEL_SST) += snd-soc-sst-dsp.o snd-soc-sst-ipc.o
obj-$(CONFIG_SND_SOC_INTEL_SST_ACPI) += snd-soc-sst-acpi.o
-obj-$(CONFIG_SND_SOC_INTEL_SST_MATCH) += snd-soc-sst-match.o
obj-$(CONFIG_SND_SOC_INTEL_SST_FIRMWARE) += snd-soc-sst-firmware.o
+obj-$(CONFIG_SND_SOC_ACPI_INTEL_MATCH) += snd-soc-acpi-intel-match.o
diff --git a/sound/soc/intel/common/soc-acpi-intel-byt-match.c b/sound/soc/intel/common/soc-acpi-intel-byt-match.c
new file mode 100644
index 000000000000..bfe1ca68a542
--- /dev/null
+++ b/sound/soc/intel/common/soc-acpi-intel-byt-match.c
@@ -0,0 +1,196 @@
+/*
+ * soc-apci-intel-byt-match.c - tables and support for BYT ACPI enumeration.
+ *
+ * Copyright (c) 2017, Intel Corporation.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/dmi.h>
+#include <sound/soc-acpi.h>
+#include <sound/soc-acpi-intel-match.h>
+
+static unsigned long byt_machine_id;
+
+#define BYT_THINKPAD_10 1
+
+static int byt_thinkpad10_quirk_cb(const struct dmi_system_id *id)
+{
+ byt_machine_id = BYT_THINKPAD_10;
+ return 1;
+}
+
+
+static const struct dmi_system_id byt_table[] = {
+ {
+ .callback = byt_thinkpad10_quirk_cb,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 10"),
+ },
+ },
+ {
+ .callback = byt_thinkpad10_quirk_cb,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Tablet B"),
+ },
+ },
+ {
+ .callback = byt_thinkpad10_quirk_cb,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Miix 2 10"),
+ },
+ },
+ { }
+};
+
+static struct snd_soc_acpi_mach byt_thinkpad_10 = {
+ .id = "10EC5640",
+ .drv_name = "cht-bsw-rt5672",
+ .fw_filename = "intel/fw_sst_0f28.bin",
+ .board = "cht-bsw",
+ .sof_fw_filename = "intel/reef-byt.ri",
+ .sof_tplg_filename = "intel/reef-byt-rt5670.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+};
+
+static struct snd_soc_acpi_mach *byt_quirk(void *arg)
+{
+ struct snd_soc_acpi_mach *mach = arg;
+
+ dmi_check_system(byt_table);
+
+ if (byt_machine_id == BYT_THINKPAD_10)
+ return &byt_thinkpad_10;
+ else
+ return mach;
+}
+
+struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_legacy_machines[] = {
+ {
+ .id = "10EC5640",
+ .drv_name = "byt-rt5640",
+ .fw_filename = "intel/fw_sst_0f28.bin-48kHz_i2s_master",
+ },
+ {
+ .id = "193C9890",
+ .drv_name = "byt-max98090",
+ .fw_filename = "intel/fw_sst_0f28.bin-48kHz_i2s_master",
+ },
+ {}
+};
+EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_baytrail_legacy_machines);
+
+struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_machines[] = {
+ {
+ .id = "10EC5640",
+ .drv_name = "bytcr_rt5640",
+ .fw_filename = "intel/fw_sst_0f28.bin",
+ .board = "bytcr_rt5640",
+ .machine_quirk = byt_quirk,
+ .sof_fw_filename = "intel/reef-byt.ri",
+ .sof_tplg_filename = "intel/reef-byt-rt5640.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "10EC5642",
+ .drv_name = "bytcr_rt5640",
+ .fw_filename = "intel/fw_sst_0f28.bin",
+ .board = "bytcr_rt5640",
+ .sof_fw_filename = "intel/reef-byt.ri",
+ .sof_tplg_filename = "intel/reef-byt-rt5640.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "INTCCFFD",
+ .drv_name = "bytcr_rt5640",
+ .fw_filename = "intel/fw_sst_0f28.bin",
+ .board = "bytcr_rt5640",
+ .sof_fw_filename = "intel/reef-byt.ri",
+ .sof_tplg_filename = "intel/reef-byt-rt5640.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "10EC5651",
+ .drv_name = "bytcr_rt5651",
+ .fw_filename = "intel/fw_sst_0f28.bin",
+ .board = "bytcr_rt5651",
+ .sof_fw_filename = "intel/reef-byt.ri",
+ .sof_tplg_filename = "intel/reef-byt-rt5651.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "DLGS7212",
+ .drv_name = "bytcht_da7213",
+ .fw_filename = "intel/fw_sst_0f28.bin",
+ .board = "bytcht_da7213",
+ .sof_fw_filename = "intel/reef-byt.ri",
+ .sof_tplg_filename = "intel/reef-byt-da7213.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "DLGS7213",
+ .drv_name = "bytcht_da7213",
+ .fw_filename = "intel/fw_sst_0f28.bin",
+ .board = "bytcht_da7213",
+ .sof_fw_filename = "intel/reef-byt.ri",
+ .sof_tplg_filename = "intel/reef-byt-da7213.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ /* some Baytrail platforms rely on RT5645, use CHT machine driver */
+ {
+ .id = "10EC5645",
+ .drv_name = "cht-bsw-rt5645",
+ .fw_filename = "intel/fw_sst_0f28.bin",
+ .board = "cht-bsw",
+ .sof_fw_filename = "intel/reef-byt.ri",
+ .sof_tplg_filename = "intel/reef-byt-rt5645.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "10EC5648",
+ .drv_name = "cht-bsw-rt5645",
+ .fw_filename = "intel/fw_sst_0f28.bin",
+ .board = "cht-bsw",
+ .sof_fw_filename = "intel/reef-byt.ri",
+ .sof_tplg_filename = "intel/reef-byt-rt5645.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ /* use CHT driver to Baytrail Chromebooks */
+ {
+ .id = "193C9890",
+ .drv_name = "cht-bsw-max98090",
+ .fw_filename = "intel/fw_sst_0f28.bin",
+ .board = "cht-bsw",
+ .sof_fw_filename = "intel/reef-byt.ri",
+ .sof_tplg_filename = "intel/reef-byt-max98090.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH)
+ /*
+ * This is always last in the table so that it is selected only when
+ * enabled explicitly and there is no codec-related information in SSDT
+ */
+ {
+ .id = "80860F28",
+ .drv_name = "bytcht_nocodec",
+ .fw_filename = "intel/fw_sst_0f28.bin",
+ .board = "bytcht_nocodec",
+ },
+#endif
+ {},
+};
+EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_baytrail_machines);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Common ACPI Match module");
diff --git a/sound/soc/intel/common/soc-acpi-intel-cht-match.c b/sound/soc/intel/common/soc-acpi-intel-cht-match.c
new file mode 100644
index 000000000000..b50a0d53846b
--- /dev/null
+++ b/sound/soc/intel/common/soc-acpi-intel-cht-match.c
@@ -0,0 +1,194 @@
+/*
+ * soc-apci-intel-cht-match.c - tables and support for CHT ACPI enumeration.
+ *
+ * Copyright (c) 2017, Intel Corporation.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/dmi.h>
+#include <sound/soc-acpi.h>
+#include <sound/soc-acpi-intel-match.h>
+
+static unsigned long cht_machine_id;
+
+#define CHT_SURFACE_MACH 1
+
+static int cht_surface_quirk_cb(const struct dmi_system_id *id)
+{
+ cht_machine_id = CHT_SURFACE_MACH;
+ return 1;
+}
+
+static const struct dmi_system_id cht_table[] = {
+ {
+ .callback = cht_surface_quirk_cb,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"),
+ },
+ },
+ { }
+};
+
+static struct snd_soc_acpi_mach cht_surface_mach = {
+ .id = "10EC5640",
+ .drv_name = "cht-bsw-rt5645",
+ .fw_filename = "intel/fw_sst_22a8.bin",
+ .board = "cht-bsw",
+ .sof_fw_filename = "intel/reef-cht.ri",
+ .sof_tplg_filename = "intel/reef-cht-rt5645.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+};
+
+static struct snd_soc_acpi_mach *cht_quirk(void *arg)
+{
+ struct snd_soc_acpi_mach *mach = arg;
+
+ dmi_check_system(cht_table);
+
+ if (cht_machine_id == CHT_SURFACE_MACH)
+ return &cht_surface_mach;
+ else
+ return mach;
+}
+
+/* Cherryview-based platforms: CherryTrail and Braswell */
+struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = {
+ {
+ .id = "10EC5670",
+ .drv_name = "cht-bsw-rt5672",
+ .fw_filename = "intel/fw_sst_22a8.bin",
+ .board = "cht-bsw",
+ .sof_fw_filename = "intel/reef-cht.ri",
+ .sof_tplg_filename = "intel/reef-cht-rt5670.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "10EC5672",
+ .drv_name = "cht-bsw-rt5672",
+ .fw_filename = "intel/fw_sst_22a8.bin",
+ .board = "cht-bsw",
+ .sof_fw_filename = "intel/reef-cht.ri",
+ .sof_tplg_filename = "intel/reef-cht-rt5670.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "10EC5645",
+ .drv_name = "cht-bsw-rt5645",
+ .fw_filename = "intel/fw_sst_22a8.bin",
+ .board = "cht-bsw",
+ .sof_fw_filename = "intel/reef-cht.ri",
+ .sof_tplg_filename = "intel/reef-cht-rt5645.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "10EC5650",
+ .drv_name = "cht-bsw-rt5645",
+ .fw_filename = "intel/fw_sst_22a8.bin",
+ .board = "cht-bsw",
+ .sof_fw_filename = "intel/reef-cht.ri",
+ .sof_tplg_filename = "intel/reef-cht-rt5645.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "10EC3270",
+ .drv_name = "cht-bsw-rt5645",
+ .fw_filename = "intel/fw_sst_22a8.bin",
+ .board = "cht-bsw",
+ .sof_fw_filename = "intel/reef-cht.ri",
+ .sof_tplg_filename = "intel/reef-cht-rt5645.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "193C9890",
+ .drv_name = "cht-bsw-max98090",
+ .fw_filename = "intel/fw_sst_22a8.bin",
+ .board = "cht-bsw",
+ .sof_fw_filename = "intel/reef-cht.ri",
+ .sof_tplg_filename = "intel/reef-cht-max98090.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "DLGS7212",
+ .drv_name = "bytcht_da7213",
+ .fw_filename = "intel/fw_sst_22a8.bin",
+ .board = "bytcht_da7213",
+ .sof_fw_filename = "intel/reef-cht.ri",
+ .sof_tplg_filename = "intel/reef-cht-da7213.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "DLGS7213",
+ .drv_name = "bytcht_da7213",
+ .fw_filename = "intel/fw_sst_22a8.bin",
+ .board = "bytcht_da7213",
+ .sof_fw_filename = "intel/reef-cht.ri",
+ .sof_tplg_filename = "intel/reef-cht-da7213.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "ESSX8316",
+ .drv_name = "bytcht_es8316",
+ .fw_filename = "intel/fw_sst_22a8.bin",
+ .board = "bytcht_es8316",
+ .sof_fw_filename = "intel/reef-cht.ri",
+ .sof_tplg_filename = "intel/reef-cht-es8316.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ /* some CHT-T platforms rely on RT5640, use Baytrail machine driver */
+ {
+ .id = "10EC5640",
+ .drv_name = "bytcr_rt5640",
+ .fw_filename = "intel/fw_sst_22a8.bin",
+ .board = "bytcr_rt5640",
+ .machine_quirk = cht_quirk,
+ .sof_fw_filename = "intel/reef-cht.ri",
+ .sof_tplg_filename = "intel/reef-cht-rt5640.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ {
+ .id = "10EC3276",
+ .drv_name = "bytcr_rt5640",
+ .fw_filename = "intel/fw_sst_22a8.bin",
+ .board = "bytcr_rt5640",
+ .sof_fw_filename = "intel/reef-cht.ri",
+ .sof_tplg_filename = "intel/reef-cht-rt5640.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+ /* some CHT-T platforms rely on RT5651, use Baytrail machine driver */
+ {
+ .id = "10EC5651",
+ .drv_name = "bytcr_rt5651",
+ .fw_filename = "intel/fw_sst_22a8.bin",
+ .board = "bytcr_rt5651",
+ .sof_fw_filename = "intel/reef-cht.ri",
+ .sof_tplg_filename = "intel/reef-cht-rt5651.tplg",
+ .asoc_plat_name = "sst-mfld-platform",
+ },
+#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH)
+ /*
+ * This is always last in the table so that it is selected only when
+ * enabled explicitly and there is no codec-related information in SSDT
+ */
+ {
+ .id = "808622A8",
+ .drv_name = "bytcht_nocodec",
+ .fw_filename = "intel/fw_sst_22a8.bin",
+ .board = "bytcht_nocodec",
+ },
+#endif
+ {},
+};
+EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_cherrytrail_machines);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Common ACPI Match module");
diff --git a/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c b/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c
new file mode 100644
index 000000000000..e0e8c8c27528
--- /dev/null
+++ b/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c
@@ -0,0 +1,64 @@
+/*
+ * soc-apci-intel-hsw-bdw-match.c - tables and support for ACPI enumeration.
+ *
+ * Copyright (c) 2017, Intel Corporation.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/dmi.h>
+#include <sound/soc-acpi.h>
+#include <sound/soc-acpi-intel-match.h>
+
+struct snd_soc_acpi_mach snd_soc_acpi_intel_haswell_machines[] = {
+ {
+ .id = "INT33CA",
+ .drv_name = "haswell-audio",
+ .fw_filename = "intel/IntcSST1.bin",
+ .sof_fw_filename = "intel/reef-hsw.ri",
+ .sof_tplg_filename = "intel/reef-hsw.tplg",
+ .asoc_plat_name = "haswell-pcm-audio",
+ },
+ {}
+};
+EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_haswell_machines);
+
+struct snd_soc_acpi_mach snd_soc_acpi_intel_broadwell_machines[] = {
+ {
+ .id = "INT343A",
+ .drv_name = "broadwell-audio",
+ .fw_filename = "intel/IntcSST2.bin",
+ .sof_fw_filename = "intel/reef-bdw.ri",
+ .sof_tplg_filename = "intel/reef-bdw-rt286.tplg",
+ .asoc_plat_name = "haswell-pcm-audio",
+ },
+ {
+ .id = "RT5677CE",
+ .drv_name = "bdw-rt5677",
+ .fw_filename = "intel/IntcSST2.bin",
+ .sof_fw_filename = "intel/reef-bdw.ri",
+ .sof_tplg_filename = "intel/reef-bdw-rt286.tplg",
+ .asoc_plat_name = "haswell-pcm-audio",
+ },
+ {
+ .id = "INT33CA",
+ .drv_name = "haswell-audio",
+ .fw_filename = "intel/IntcSST2.bin",
+ .sof_fw_filename = "intel/reef-bdw.ri",
+ .sof_tplg_filename = "intel/reef-bdw-rt5640.tplg",
+ .asoc_plat_name = "haswell-pcm-audio",
+ },
+ {}
+};
+EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_broadwell_machines);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Common ACPI Match module");
diff --git a/sound/soc/intel/common/sst-acpi.c b/sound/soc/intel/common/sst-acpi.c
index 1285cc597b6b..cf6fbbd4e378 100644
--- a/sound/soc/intel/common/sst-acpi.c
+++ b/sound/soc/intel/common/sst-acpi.c
@@ -21,7 +21,8 @@
#include <linux/platform_device.h>
#include "sst-dsp.h"
-#include "sst-acpi.h"
+#include <sound/soc-acpi.h>
+#include <sound/soc-acpi-intel-match.h>
#define SST_LPT_DSP_DMA_ADDR_OFFSET 0x0F0000
#define SST_WPT_DSP_DMA_ADDR_OFFSET 0x0FE000
@@ -30,7 +31,7 @@
/* Descriptor for setting up SST platform data */
struct sst_acpi_desc {
const char *drv_name;
- struct sst_acpi_mach *machines;
+ struct snd_soc_acpi_mach *machines;
/* Platform resource indexes. Must set to -1 if not used */
int resindex_lpe_base;
int resindex_pcicfg_base;
@@ -49,7 +50,7 @@ struct sst_acpi_priv {
struct platform_device *pdev_pcm;
struct sst_pdata sst_pdata;
struct sst_acpi_desc *desc;
- struct sst_acpi_mach *mach;
+ struct snd_soc_acpi_mach *mach;
};
static void sst_acpi_fw_cb(const struct firmware *fw, void *context)
@@ -59,7 +60,7 @@ static void sst_acpi_fw_cb(const struct firmware *fw, void *context)
struct sst_acpi_priv *sst_acpi = platform_get_drvdata(pdev);
struct sst_pdata *sst_pdata = &sst_acpi->sst_pdata;
struct sst_acpi_desc *desc = sst_acpi->desc;
- struct sst_acpi_mach *mach = sst_acpi->mach;
+ struct snd_soc_acpi_mach *mach = sst_acpi->mach;
sst_pdata->fw = fw;
if (!fw) {
@@ -85,7 +86,7 @@ static int sst_acpi_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct sst_acpi_priv *sst_acpi;
struct sst_pdata *sst_pdata;
- struct sst_acpi_mach *mach;
+ struct snd_soc_acpi_mach *mach;
struct sst_acpi_desc *desc;
struct resource *mmio;
int ret = 0;
@@ -99,7 +100,7 @@ static int sst_acpi_probe(struct platform_device *pdev)
return -ENODEV;
desc = (struct sst_acpi_desc *)id->driver_data;
- mach = sst_acpi_find_machine(desc->machines);
+ mach = snd_soc_acpi_find_machine(desc->machines);
if (mach == NULL) {
dev_err(dev, "No matching ASoC machine driver found\n");
return -ENODEV;
@@ -179,14 +180,9 @@ static int sst_acpi_remove(struct platform_device *pdev)
return 0;
}
-static struct sst_acpi_mach haswell_machines[] = {
- { "INT33CA", "haswell-audio", "intel/IntcSST1.bin", NULL, NULL, NULL },
- {}
-};
-
static struct sst_acpi_desc sst_acpi_haswell_desc = {
.drv_name = "haswell-pcm-audio",
- .machines = haswell_machines,
+ .machines = snd_soc_acpi_intel_haswell_machines,
.resindex_lpe_base = 0,
.resindex_pcicfg_base = 1,
.resindex_fw_base = -1,
@@ -197,15 +193,9 @@ static struct sst_acpi_desc sst_acpi_haswell_desc = {
.dma_size = SST_LPT_DSP_DMA_SIZE,
};
-static struct sst_acpi_mach broadwell_machines[] = {
- { "INT343A", "broadwell-audio", "intel/IntcSST2.bin", NULL, NULL, NULL },
- { "RT5677CE", "bdw-rt5677", "intel/IntcSST2.bin", NULL, NULL, NULL },
- {}
-};
-
static struct sst_acpi_desc sst_acpi_broadwell_desc = {
.drv_name = "haswell-pcm-audio",
- .machines = broadwell_machines,
+ .machines = snd_soc_acpi_intel_broadwell_machines,
.resindex_lpe_base = 0,
.resindex_pcicfg_base = 1,
.resindex_fw_base = -1,
@@ -217,15 +207,9 @@ static struct sst_acpi_desc sst_acpi_broadwell_desc = {
};
#if !IS_ENABLED(CONFIG_SND_SST_IPC_ACPI)
-static struct sst_acpi_mach baytrail_machines[] = {
- { "10EC5640", "byt-rt5640", "intel/fw_sst_0f28.bin-48kHz_i2s_master", NULL, NULL, NULL },
- { "193C9890", "byt-max98090", "intel/fw_sst_0f28.bin-48kHz_i2s_master", NULL, NULL, NULL },
- {}
-};
-
static struct sst_acpi_desc sst_acpi_baytrail_desc = {
.drv_name = "baytrail-pcm-audio",
- .machines = baytrail_machines,
+ .machines = snd_soc_acpi_intel_baytrail_legacy_machines,
.resindex_lpe_base = 0,
.resindex_pcicfg_base = 1,
.resindex_fw_base = 2,
diff --git a/sound/soc/intel/common/sst-acpi.h b/sound/soc/intel/common/sst-acpi.h
deleted file mode 100644
index afe9b87b8bd5..000000000000
--- a/sound/soc/intel/common/sst-acpi.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2013-15, Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/stddef.h>
-#include <linux/acpi.h>
-
-struct sst_acpi_package_context {
- char *name; /* package name */
- int length; /* number of elements */
- struct acpi_buffer *format;
- struct acpi_buffer *state;
- bool data_valid;
-};
-
-#if IS_ENABLED(CONFIG_ACPI)
-/* translation fron HID to I2C name, needed for DAI codec_name */
-const char *sst_acpi_find_name_from_hid(const u8 hid[ACPI_ID_LEN]);
-bool sst_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN],
- struct sst_acpi_package_context *ctx);
-#else
-static inline const char *sst_acpi_find_name_from_hid(const u8 hid[ACPI_ID_LEN])
-{
- return NULL;
-}
-static inline bool sst_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN],
- struct sst_acpi_package_context *ctx)
-{
- return false;
-}
-#endif
-
-/* acpi match */
-struct sst_acpi_mach *sst_acpi_find_machine(struct sst_acpi_mach *machines);
-
-/* acpi check hid */
-bool sst_acpi_check_hid(const u8 hid[ACPI_ID_LEN]);
-
-/* Descriptor for SST ASoC machine driver */
-struct sst_acpi_mach {
- /* ACPI ID for the matching machine driver. Audio codec for instance */
- const u8 id[ACPI_ID_LEN];
- /* machine driver name */
- const char *drv_name;
- /* firmware file name */
- const char *fw_filename;
-
- /* board name */
- const char *board;
- struct sst_acpi_mach * (*machine_quirk)(void *arg);
- const void *quirk_data;
- void *pdata;
-};
-
-#define SST_ACPI_MAX_CODECS 3
-
-/**
- * struct sst_codecs: Structure to hold secondary codec information apart from
- * the matched one, this data will be passed to the quirk function to match
- * with the ACPI detected devices
- *
- * @num_codecs: number of secondary codecs used in the platform
- * @codecs: holds the codec IDs
- *
- */
-struct sst_codecs {
- int num_codecs;
- u8 codecs[SST_ACPI_MAX_CODECS][ACPI_ID_LEN];
-};
-
-/* check all codecs */
-struct sst_acpi_mach *sst_acpi_codec_list(void *arg);
diff --git a/sound/soc/intel/common/sst-firmware.c b/sound/soc/intel/common/sst-firmware.c
index a086c35f91bb..657afc02f1c4 100644
--- a/sound/soc/intel/common/sst-firmware.c
+++ b/sound/soc/intel/common/sst-firmware.c
@@ -19,6 +19,7 @@
#include <linux/sched.h>
#include <linux/firmware.h>
#include <linux/export.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
@@ -274,7 +275,6 @@ int sst_dma_new(struct sst_dsp *sst)
struct sst_pdata *sst_pdata = sst->pdata;
struct sst_dma *dma;
struct resource mem;
- const char *dma_dev_name;
int ret = 0;
if (sst->pdata->resindex_dma_base == -1)
@@ -285,7 +285,6 @@ int sst_dma_new(struct sst_dsp *sst)
* is attached to the ADSP IP. */
switch (sst->pdata->dma_engine) {
case SST_DMA_TYPE_DW:
- dma_dev_name = "dw_dmac";
break;
default:
dev_err(sst->dev, "error: invalid DMA engine %d\n",
diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c
index b9c205c8bb73..61b5bfa79d13 100644
--- a/sound/soc/intel/skylake/skl-messages.c
+++ b/sound/soc/intel/skylake/skl-messages.c
@@ -613,8 +613,10 @@ skip_buf_size_calc:
}
#define DMA_CONTROL_ID 5
+#define DMA_I2S_BLOB_SIZE 21
-int skl_dsp_set_dma_control(struct skl_sst *ctx, struct skl_module_cfg *mconfig)
+int skl_dsp_set_dma_control(struct skl_sst *ctx, u32 *caps,
+ u32 caps_size, u32 node_id)
{
struct skl_dma_control *dma_ctrl;
struct skl_ipc_large_config_msg msg = {0};
@@ -624,24 +626,27 @@ int skl_dsp_set_dma_control(struct skl_sst *ctx, struct skl_module_cfg *mconfig)
/*
* if blob size zero, then return
*/
- if (mconfig->formats_config.caps_size == 0)
+ if (caps_size == 0)
return 0;
msg.large_param_id = DMA_CONTROL_ID;
- msg.param_data_size = sizeof(struct skl_dma_control) +
- mconfig->formats_config.caps_size;
+ msg.param_data_size = sizeof(struct skl_dma_control) + caps_size;
dma_ctrl = kzalloc(msg.param_data_size, GFP_KERNEL);
if (dma_ctrl == NULL)
return -ENOMEM;
- dma_ctrl->node_id = skl_get_node_id(ctx, mconfig);
+ dma_ctrl->node_id = node_id;
- /* size in dwords */
- dma_ctrl->config_length = mconfig->formats_config.caps_size / 4;
+ /*
+ * NHLT blob may contain additional configs along with i2s blob.
+ * firmware expects only the i2s blob size as the config_length.
+ * So fix to i2s blob size.
+ * size in dwords.
+ */
+ dma_ctrl->config_length = DMA_I2S_BLOB_SIZE;
- memcpy(dma_ctrl->config_data, mconfig->formats_config.caps,
- mconfig->formats_config.caps_size);
+ memcpy(dma_ctrl->config_data, caps, caps_size);
err = skl_ipc_set_large_config(&ctx->ipc, &msg, (u32 *)dma_ctrl);
diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c
index a3cb204e9640..1dd97479e0c0 100644
--- a/sound/soc/intel/skylake/skl-pcm.c
+++ b/sound/soc/intel/skylake/skl-pcm.c
@@ -653,7 +653,7 @@ static const struct snd_soc_dai_ops skl_link_dai_ops = {
.trigger = skl_link_pcm_trigger,
};
-static struct snd_soc_dai_driver skl_platform_dai[] = {
+static struct snd_soc_dai_driver skl_fe_dai[] = {
{
.name = "System Pin",
.ops = &skl_pcm_dai_ops,
@@ -797,8 +797,10 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
.sig_bits = 32,
},
},
+};
/* BE CPU Dais */
+static struct snd_soc_dai_driver skl_platform_dai[] = {
{
.name = "SSP0 Pin",
.ops = &skl_be_ssp_dai_ops,
@@ -976,6 +978,14 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
},
};
+int skl_dai_load(struct snd_soc_component *cmp,
+ struct snd_soc_dai_driver *pcm_dai)
+{
+ pcm_dai->ops = &skl_pcm_dai_ops;
+
+ return 0;
+}
+
static int skl_platform_open(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
@@ -1363,6 +1373,8 @@ int skl_platform_register(struct device *dev)
int ret;
struct hdac_ext_bus *ebus = dev_get_drvdata(dev);
struct skl *skl = ebus_to_skl(ebus);
+ struct snd_soc_dai_driver *dais;
+ int num_dais = ARRAY_SIZE(skl_platform_dai);
INIT_LIST_HEAD(&skl->ppl_list);
INIT_LIST_HEAD(&skl->bind_list);
@@ -1372,14 +1384,38 @@ int skl_platform_register(struct device *dev)
dev_err(dev, "soc platform registration failed %d\n", ret);
return ret;
}
+
+ skl->dais = kmemdup(skl_platform_dai, sizeof(skl_platform_dai),
+ GFP_KERNEL);
+ if (!skl->dais) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ if (!skl->use_tplg_pcm) {
+ dais = krealloc(skl->dais, sizeof(skl_fe_dai) +
+ sizeof(skl_platform_dai), GFP_KERNEL);
+ if (!dais) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ skl->dais = dais;
+ memcpy(&skl->dais[ARRAY_SIZE(skl_platform_dai)], skl_fe_dai,
+ sizeof(skl_fe_dai));
+ num_dais += ARRAY_SIZE(skl_fe_dai);
+ }
+
ret = snd_soc_register_component(dev, &skl_component,
- skl_platform_dai,
- ARRAY_SIZE(skl_platform_dai));
+ skl->dais, num_dais);
if (ret) {
dev_err(dev, "soc component registration failed %d\n", ret);
- snd_soc_unregister_platform(dev);
+ goto err;
}
+ return 0;
+err:
+ snd_soc_unregister_platform(dev);
return ret;
}
@@ -1399,5 +1435,7 @@ int skl_platform_unregister(struct device *dev)
snd_soc_unregister_component(dev);
snd_soc_unregister_platform(dev);
+ kfree(skl->dais);
+
return 0;
}
diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c
index 27bcb62568fb..a072bcf209d2 100644
--- a/sound/soc/intel/skylake/skl-topology.c
+++ b/sound/soc/intel/skylake/skl-topology.c
@@ -2036,21 +2036,45 @@ static int skl_tplg_add_pipe(struct device *dev,
return 0;
}
-static int skl_tplg_fill_pin(struct device *dev, u32 tkn,
+static int skl_tplg_get_uuid(struct device *dev, u8 *guid,
+ struct snd_soc_tplg_vendor_uuid_elem *uuid_tkn)
+{
+ if (uuid_tkn->token == SKL_TKN_UUID) {
+ memcpy(guid, &uuid_tkn->uuid, 16);
+ return 0;
+ }
+
+ dev_err(dev, "Not an UUID token %d\n", uuid_tkn->token);
+
+ return -EINVAL;
+}
+
+static int skl_tplg_fill_pin(struct device *dev,
+ struct snd_soc_tplg_vendor_value_elem *tkn_elem,
struct skl_module_pin *m_pin,
- int pin_index, u32 value)
+ int pin_index)
{
- switch (tkn) {
+ int ret;
+
+ switch (tkn_elem->token) {
case SKL_TKN_U32_PIN_MOD_ID:
- m_pin[pin_index].id.module_id = value;
+ m_pin[pin_index].id.module_id = tkn_elem->value;
break;
case SKL_TKN_U32_PIN_INST_ID:
- m_pin[pin_index].id.instance_id = value;
+ m_pin[pin_index].id.instance_id = tkn_elem->value;
+ break;
+
+ case SKL_TKN_UUID:
+ ret = skl_tplg_get_uuid(dev, m_pin[pin_index].id.mod_uuid.b,
+ (struct snd_soc_tplg_vendor_uuid_elem *)tkn_elem);
+ if (ret < 0)
+ return ret;
+
break;
default:
- dev_err(dev, "%d Not a pin token\n", value);
+ dev_err(dev, "%d Not a pin token\n", tkn_elem->token);
return -EINVAL;
}
@@ -2083,9 +2107,7 @@ static int skl_tplg_fill_pins_info(struct device *dev,
return -EINVAL;
}
- ret = skl_tplg_fill_pin(dev, tkn_elem->token,
- m_pin, pin_count, tkn_elem->value);
-
+ ret = skl_tplg_fill_pin(dev, tkn_elem, m_pin, pin_count);
if (ret < 0)
return ret;
@@ -2170,19 +2192,6 @@ static int skl_tplg_widget_fill_fmt(struct device *dev,
return skl_tplg_fill_fmt(dev, dst_fmt, tkn, val);
}
-static int skl_tplg_get_uuid(struct device *dev, struct skl_module_cfg *mconfig,
- struct snd_soc_tplg_vendor_uuid_elem *uuid_tkn)
-{
- if (uuid_tkn->token == SKL_TKN_UUID)
- memcpy(&mconfig->guid, &uuid_tkn->uuid, 16);
- else {
- dev_err(dev, "Not an UUID token tkn %d\n", uuid_tkn->token);
- return -EINVAL;
- }
-
- return 0;
-}
-
static void skl_tplg_fill_pin_dynamic_val(
struct skl_module_pin *mpin, u32 pin_count, u32 value)
{
@@ -2488,6 +2497,7 @@ static int skl_tplg_get_token(struct device *dev,
case SKL_TKN_U32_PIN_MOD_ID:
case SKL_TKN_U32_PIN_INST_ID:
+ case SKL_TKN_UUID:
ret = skl_tplg_fill_pins_info(dev,
mconfig, tkn_elem, dir,
pin_index);
@@ -2550,6 +2560,7 @@ static int skl_tplg_get_tokens(struct device *dev,
struct snd_soc_tplg_vendor_value_elem *tkn_elem;
int tkn_count = 0, ret;
int off = 0, tuple_size = 0;
+ bool is_module_guid = true;
if (block_size <= 0)
return -EINVAL;
@@ -2565,7 +2576,15 @@ static int skl_tplg_get_tokens(struct device *dev,
continue;
case SND_SOC_TPLG_TUPLE_TYPE_UUID:
- ret = skl_tplg_get_uuid(dev, mconfig, array->uuid);
+ if (is_module_guid) {
+ ret = skl_tplg_get_uuid(dev, mconfig->guid,
+ array->uuid);
+ is_module_guid = false;
+ } else {
+ ret = skl_tplg_get_token(dev, array->value, skl,
+ mconfig);
+ }
+
if (ret < 0)
return ret;
@@ -3331,6 +3350,7 @@ static struct snd_soc_tplg_ops skl_tplg_ops = {
.io_ops = skl_tplg_kcontrol_ops,
.io_ops_count = ARRAY_SIZE(skl_tplg_kcontrol_ops),
.manifest = skl_manifest_load,
+ .dai_load = skl_dai_load,
};
/*
@@ -3404,7 +3424,7 @@ int skl_tplg_init(struct snd_soc_platform *platform, struct hdac_ext_bus *ebus)
ret = request_firmware(&fw, skl->tplg_name, bus->dev);
if (ret < 0) {
- dev_err(bus->dev, "tplg fw %s load failed with %d\n",
+ dev_info(bus->dev, "tplg fw %s load failed with %d, falling back to dfw_sst.bin",
skl->tplg_name, ret);
ret = request_firmware(&fw, "dfw_sst.bin", bus->dev);
if (ret < 0) {
diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h
index bc3c29161ed0..b6496513fe55 100644
--- a/sound/soc/intel/skylake/skl-topology.h
+++ b/sound/soc/intel/skylake/skl-topology.h
@@ -456,8 +456,8 @@ static inline struct skl *get_skl_ctx(struct device *dev)
int skl_tplg_be_update_params(struct snd_soc_dai *dai,
struct skl_pipe_params *params);
-int skl_dsp_set_dma_control(struct skl_sst *ctx,
- struct skl_module_cfg *mconfig);
+int skl_dsp_set_dma_control(struct skl_sst *ctx, u32 *caps,
+ u32 caps_size, u32 node_id);
void skl_tplg_set_be_dmic_config(struct snd_soc_dai *dai,
struct skl_pipe_params *params, int stream);
int skl_tplg_init(struct snd_soc_platform *platform,
@@ -502,4 +502,7 @@ int skl_pcm_host_dma_prepare(struct device *dev,
struct skl_pipe_params *params);
int skl_pcm_link_dma_prepare(struct device *dev,
struct skl_pipe_params *params);
+
+int skl_dai_load(struct snd_soc_component *cmp,
+ struct snd_soc_dai_driver *pcm_dai);
#endif
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index f94b484abb99..31d8634e8aa1 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -28,7 +28,7 @@
#include <linux/firmware.h>
#include <linux/delay.h>
#include <sound/pcm.h>
-#include "../common/sst-acpi.h"
+#include <sound/soc-acpi.h>
#include <sound/hda_register.h>
#include <sound/hdaudio.h>
#include <sound/hda_i915.h>
@@ -439,10 +439,10 @@ static int skl_machine_device_register(struct skl *skl, void *driver_data)
{
struct hdac_bus *bus = ebus_to_hbus(&skl->ebus);
struct platform_device *pdev;
- struct sst_acpi_mach *mach = driver_data;
+ struct snd_soc_acpi_mach *mach = driver_data;
int ret;
- mach = sst_acpi_find_machine(mach);
+ mach = snd_soc_acpi_find_machine(mach);
if (mach == NULL) {
dev_err(bus->dev, "No matching machine driver found\n");
return -ENODEV;
@@ -462,8 +462,11 @@ static int skl_machine_device_register(struct skl *skl, void *driver_data)
return -EIO;
}
- if (mach->pdata)
+ if (mach->pdata) {
+ skl->use_tplg_pcm =
+ ((struct skl_machine_pdata *)mach->pdata)->use_tplg_pcm;
dev_set_drvdata(&pdev->dev, mach->pdata);
+ }
skl->i2s_dev = pdev;
@@ -875,33 +878,36 @@ static void skl_remove(struct pci_dev *pci)
dev_set_drvdata(&pci->dev, NULL);
}
-static struct sst_codecs skl_codecs = {
+static struct snd_soc_acpi_codecs skl_codecs = {
.num_codecs = 1,
.codecs = {"10508825"}
};
-static struct sst_codecs kbl_codecs = {
+static struct snd_soc_acpi_codecs kbl_codecs = {
.num_codecs = 1,
.codecs = {"10508825"}
};
-static struct sst_codecs bxt_codecs = {
+static struct snd_soc_acpi_codecs bxt_codecs = {
.num_codecs = 1,
.codecs = {"MX98357A"}
};
-static struct sst_codecs kbl_poppy_codecs = {
+static struct snd_soc_acpi_codecs kbl_poppy_codecs = {
.num_codecs = 1,
.codecs = {"10EC5663"}
};
-static struct sst_codecs kbl_5663_5514_codecs = {
+static struct snd_soc_acpi_codecs kbl_5663_5514_codecs = {
.num_codecs = 2,
.codecs = {"10EC5663", "10EC5514"}
};
+static struct skl_machine_pdata cnl_pdata = {
+ .use_tplg_pcm = true,
+};
-static struct sst_acpi_mach sst_skl_devdata[] = {
+static struct snd_soc_acpi_mach sst_skl_devdata[] = {
{
.id = "INT343A",
.drv_name = "skl_alc286s_i2s",
@@ -911,7 +917,7 @@ static struct sst_acpi_mach sst_skl_devdata[] = {
.id = "INT343B",
.drv_name = "skl_n88l25_s4567",
.fw_filename = "intel/dsp_fw_release.bin",
- .machine_quirk = sst_acpi_codec_list,
+ .machine_quirk = snd_soc_acpi_codec_list,
.quirk_data = &skl_codecs,
.pdata = &skl_dmic_data
},
@@ -919,14 +925,14 @@ static struct sst_acpi_mach sst_skl_devdata[] = {
.id = "MX98357A",
.drv_name = "skl_n88l25_m98357a",
.fw_filename = "intel/dsp_fw_release.bin",
- .machine_quirk = sst_acpi_codec_list,
+ .machine_quirk = snd_soc_acpi_codec_list,
.quirk_data = &skl_codecs,
.pdata = &skl_dmic_data
},
{}
};
-static struct sst_acpi_mach sst_bxtp_devdata[] = {
+static struct snd_soc_acpi_mach sst_bxtp_devdata[] = {
{
.id = "INT343A",
.drv_name = "bxt_alc298s_i2s",
@@ -936,13 +942,13 @@ static struct sst_acpi_mach sst_bxtp_devdata[] = {
.id = "DLGS7219",
.drv_name = "bxt_da7219_max98357a_i2s",
.fw_filename = "intel/dsp_fw_bxtn.bin",
- .machine_quirk = sst_acpi_codec_list,
+ .machine_quirk = snd_soc_acpi_codec_list,
.quirk_data = &bxt_codecs,
},
{}
};
-static struct sst_acpi_mach sst_kbl_devdata[] = {
+static struct snd_soc_acpi_mach sst_kbl_devdata[] = {
{
.id = "INT343A",
.drv_name = "kbl_alc286s_i2s",
@@ -952,7 +958,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = {
.id = "INT343B",
.drv_name = "kbl_n88l25_s4567",
.fw_filename = "intel/dsp_fw_kbl.bin",
- .machine_quirk = sst_acpi_codec_list,
+ .machine_quirk = snd_soc_acpi_codec_list,
.quirk_data = &kbl_codecs,
.pdata = &skl_dmic_data
},
@@ -960,7 +966,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = {
.id = "MX98357A",
.drv_name = "kbl_n88l25_m98357a",
.fw_filename = "intel/dsp_fw_kbl.bin",
- .machine_quirk = sst_acpi_codec_list,
+ .machine_quirk = snd_soc_acpi_codec_list,
.quirk_data = &kbl_codecs,
.pdata = &skl_dmic_data
},
@@ -968,7 +974,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = {
.id = "MX98927",
.drv_name = "kbl_r5514_5663_max",
.fw_filename = "intel/dsp_fw_kbl.bin",
- .machine_quirk = sst_acpi_codec_list,
+ .machine_quirk = snd_soc_acpi_codec_list,
.quirk_data = &kbl_5663_5514_codecs,
.pdata = &skl_dmic_data
},
@@ -976,7 +982,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = {
.id = "MX98927",
.drv_name = "kbl_rt5663_m98927",
.fw_filename = "intel/dsp_fw_kbl.bin",
- .machine_quirk = sst_acpi_codec_list,
+ .machine_quirk = snd_soc_acpi_codec_list,
.quirk_data = &kbl_poppy_codecs,
.pdata = &skl_dmic_data
},
@@ -989,7 +995,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = {
{}
};
-static struct sst_acpi_mach sst_glk_devdata[] = {
+static struct snd_soc_acpi_mach sst_glk_devdata[] = {
{
.id = "INT343A",
.drv_name = "glk_alc298s_i2s",
@@ -998,12 +1004,14 @@ static struct sst_acpi_mach sst_glk_devdata[] = {
{}
};
-static const struct sst_acpi_mach sst_cnl_devdata[] = {
+static const struct snd_soc_acpi_mach sst_cnl_devdata[] = {
{
.id = "INT34C2",
.drv_name = "cnl_rt274",
.fw_filename = "intel/dsp_fw_cnl.bin",
+ .pdata = &cnl_pdata,
},
+ {}
};
/* PCI IDs */
diff --git a/sound/soc/intel/skylake/skl.h b/sound/soc/intel/skylake/skl.h
index 8d9d6899f761..e00cde8200dd 100644
--- a/sound/soc/intel/skylake/skl.h
+++ b/sound/soc/intel/skylake/skl.h
@@ -53,6 +53,7 @@ struct skl {
struct platform_device *dmic_dev;
struct platform_device *i2s_dev;
struct snd_soc_platform *platform;
+ struct snd_soc_dai_driver *dais;
struct nhlt_acpi_table *nhlt; /* nhlt ptr */
struct skl_sst *skl_sst; /* sst skl ctx */
@@ -73,6 +74,7 @@ struct skl {
struct skl_debug *debugfs;
u8 nr_modules;
struct skl_module **modules;
+ bool use_tplg_pcm;
};
#define skl_to_ebus(s) (&(s)->ebus)
@@ -85,9 +87,9 @@ struct skl_dma_params {
u8 stream_tag;
};
-/* to pass dmic data */
struct skl_machine_pdata {
u32 dmic_num;
+ bool use_tplg_pcm; /* use dais and dai links from topology */
};
struct skl_dsp_ops {
diff --git a/sound/soc/intel/common/sst-match-acpi.c b/sound/soc/soc-acpi.c
index 56d26f36a3cb..f21df28bc28e 100644
--- a/sound/soc/intel/common/sst-match-acpi.c
+++ b/sound/soc/soc-acpi.c
@@ -1,5 +1,5 @@
/*
- * sst_match_apci.c - SST (LPE) match for ACPI enumeration.
+ * soc-apci.c - support for ACPI enumeration.
*
* Copyright (c) 2013-15, Intel Corporation.
*
@@ -14,9 +14,9 @@
* more details.
*/
-#include "sst-acpi.h"
+#include <sound/soc-acpi.h>
-static acpi_status sst_acpi_find_name(acpi_handle handle, u32 level,
+static acpi_status snd_soc_acpi_find_name(acpi_handle handle, u32 level,
void *context, void **ret)
{
struct acpi_device *adev;
@@ -34,12 +34,12 @@ static acpi_status sst_acpi_find_name(acpi_handle handle, u32 level,
return AE_OK;
}
-const char *sst_acpi_find_name_from_hid(const u8 hid[ACPI_ID_LEN])
+const char *snd_soc_acpi_find_name_from_hid(const u8 hid[ACPI_ID_LEN])
{
const char *name = NULL;
acpi_status status;
- status = acpi_get_devices(hid, sst_acpi_find_name, NULL,
+ status = acpi_get_devices(hid, snd_soc_acpi_find_name, NULL,
(void **)&name);
if (ACPI_FAILURE(status) || name[0] == '\0')
@@ -47,9 +47,9 @@ const char *sst_acpi_find_name_from_hid(const u8 hid[ACPI_ID_LEN])
return name;
}
-EXPORT_SYMBOL_GPL(sst_acpi_find_name_from_hid);
+EXPORT_SYMBOL_GPL(snd_soc_acpi_find_name_from_hid);
-static acpi_status sst_acpi_mach_match(acpi_handle handle, u32 level,
+static acpi_status snd_soc_acpi_mach_match(acpi_handle handle, u32 level,
void *context, void **ret)
{
unsigned long long sta;
@@ -63,26 +63,27 @@ static acpi_status sst_acpi_mach_match(acpi_handle handle, u32 level,
return AE_OK;
}
-bool sst_acpi_check_hid(const u8 hid[ACPI_ID_LEN])
+bool snd_soc_acpi_check_hid(const u8 hid[ACPI_ID_LEN])
{
acpi_status status;
bool found = false;
- status = acpi_get_devices(hid, sst_acpi_mach_match, &found, NULL);
+ status = acpi_get_devices(hid, snd_soc_acpi_mach_match, &found, NULL);
if (ACPI_FAILURE(status))
return false;
return found;
}
-EXPORT_SYMBOL_GPL(sst_acpi_check_hid);
+EXPORT_SYMBOL_GPL(snd_soc_acpi_check_hid);
-struct sst_acpi_mach *sst_acpi_find_machine(struct sst_acpi_mach *machines)
+struct snd_soc_acpi_mach *
+snd_soc_acpi_find_machine(struct snd_soc_acpi_mach *machines)
{
- struct sst_acpi_mach *mach;
+ struct snd_soc_acpi_mach *mach;
for (mach = machines; mach->id[0]; mach++) {
- if (sst_acpi_check_hid(mach->id) == true) {
+ if (snd_soc_acpi_check_hid(mach->id) == true) {
if (mach->machine_quirk == NULL)
return mach;
@@ -92,14 +93,14 @@ struct sst_acpi_mach *sst_acpi_find_machine(struct sst_acpi_mach *machines)
}
return NULL;
}
-EXPORT_SYMBOL_GPL(sst_acpi_find_machine);
+EXPORT_SYMBOL_GPL(snd_soc_acpi_find_machine);
-static acpi_status sst_acpi_find_package(acpi_handle handle, u32 level,
- void *context, void **ret)
+static acpi_status snd_soc_acpi_find_package(acpi_handle handle, u32 level,
+ void *context, void **ret)
{
struct acpi_device *adev;
acpi_status status = AE_OK;
- struct sst_acpi_package_context *pkg_ctx = context;
+ struct snd_soc_acpi_package_context *pkg_ctx = context;
pkg_ctx->data_valid = false;
@@ -137,37 +138,38 @@ static acpi_status sst_acpi_find_package(acpi_handle handle, u32 level,
return AE_OK;
}
-bool sst_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN],
- struct sst_acpi_package_context *ctx)
+bool snd_soc_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN],
+ struct snd_soc_acpi_package_context *ctx)
{
acpi_status status;
- status = acpi_get_devices(hid, sst_acpi_find_package, ctx, NULL);
+ status = acpi_get_devices(hid, snd_soc_acpi_find_package, ctx, NULL);
if (ACPI_FAILURE(status) || !ctx->data_valid)
return false;
return true;
}
-EXPORT_SYMBOL_GPL(sst_acpi_find_package_from_hid);
+EXPORT_SYMBOL_GPL(snd_soc_acpi_find_package_from_hid);
-struct sst_acpi_mach *sst_acpi_codec_list(void *arg)
+struct snd_soc_acpi_mach *snd_soc_acpi_codec_list(void *arg)
{
- struct sst_acpi_mach *mach = arg;
- struct sst_codecs *codec_list = (struct sst_codecs *) mach->quirk_data;
+ struct snd_soc_acpi_mach *mach = arg;
+ struct snd_soc_acpi_codecs *codec_list =
+ (struct snd_soc_acpi_codecs *) mach->quirk_data;
int i;
if (mach->quirk_data == NULL)
return mach;
for (i = 0; i < codec_list->num_codecs; i++) {
- if (sst_acpi_check_hid(codec_list->codecs[i]) != true)
+ if (snd_soc_acpi_check_hid(codec_list->codecs[i]) != true)
return NULL;
}
return mach;
}
-EXPORT_SYMBOL_GPL(sst_acpi_codec_list);
+EXPORT_SYMBOL_GPL(snd_soc_acpi_codec_list);
MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Intel Common ACPI Match module");
+MODULE_DESCRIPTION("ALSA SoC ACPI module");