diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-12-15 04:21:16 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-12-15 04:21:16 +0300 |
commit | 8c1dccc80380fca8db09c2a81f5deb3c49b112b2 (patch) | |
tree | fb52b154f469b3a9fc433fc450a59b3077bc99a5 /tools/memory-model/Documentation/ordering.txt | |
parent | 1ac0884d5474fea8dc6ceabbd0e870d1bf4b7b42 (diff) | |
parent | 50df51d12c3175573de9c94968639bdd625ec549 (diff) | |
download | linux-8c1dccc80380fca8db09c2a81f5deb3c49b112b2.tar.xz |
Merge tag 'core-rcu-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Thomas Gleixner:
"RCU, LKMM and KCSAN updates collected by Paul McKenney.
RCU:
- Avoid cpuinfo-induced IPI pileups and idle-CPU IPIs
- Lockdep-RCU updates reducing the need for __maybe_unused
- Tasks-RCU updates
- Miscellaneous fixes
- Documentation updates
- Torture-test updates
KCSAN:
- updates for selftests, avoiding setting watchpoints on NULL pointers
- fix to watchpoint encoding
LKMM:
- updates for documentation along with some updates to example-code
litmus tests"
* tag 'core-rcu-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
srcu: Take early exit on memory-allocation failure
rcu/tree: Defer kvfree_rcu() allocation to a clean context
rcu: Do not report strict GPs for outgoing CPUs
rcu: Fix a typo in rcu_blocking_is_gp() header comment
rcu: Prevent lockdep-RCU splats on lock acquisition/release
rcu/tree: nocb: Avoid raising softirq for offloaded ready-to-execute CBs
rcu,ftrace: Fix ftrace recursion
rcu/tree: Make struct kernel_param_ops definitions const
rcu/tree: Add a warning if CPU being onlined did not report QS already
rcu: Clarify nocb kthreads naming in RCU_NOCB_CPU config
rcu: Fix single-CPU check in rcu_blocking_is_gp()
rcu: Implement rcu_segcblist_is_offloaded() config dependent
list.h: Update comment to explicitly note circular lists
rcu: Panic after fixed number of stalls
x86/smpboot: Move rcu_cpu_starting() earlier
rcu: Allow rcu_irq_enter_check_tick() from NMI
tools/memory-model: Label MP tests' producers and consumers
tools/memory-model: Use "buf" and "flag" for message-passing tests
tools/memory-model: Add types to litmus tests
tools/memory-model: Add a glossary of LKMM terms
...
Diffstat (limited to 'tools/memory-model/Documentation/ordering.txt')
-rw-r--r-- | tools/memory-model/Documentation/ordering.txt | 556 |
1 files changed, 556 insertions, 0 deletions
diff --git a/tools/memory-model/Documentation/ordering.txt b/tools/memory-model/Documentation/ordering.txt new file mode 100644 index 000000000000..9b0949d3f5ec --- /dev/null +++ b/tools/memory-model/Documentation/ordering.txt @@ -0,0 +1,556 @@ +This document gives an overview of the categories of memory-ordering +operations provided by the Linux-kernel memory model (LKMM). + + +Categories of Ordering +====================== + +This section lists LKMM's three top-level categories of memory-ordering +operations in decreasing order of strength: + +1. Barriers (also known as "fences"). A barrier orders some or + all of the CPU's prior operations against some or all of its + subsequent operations. + +2. Ordered memory accesses. These operations order themselves + against some or all of the CPU's prior accesses or some or all + of the CPU's subsequent accesses, depending on the subcategory + of the operation. + +3. Unordered accesses, as the name indicates, have no ordering + properties except to the extent that they interact with an + operation in the previous categories. This being the real world, + some of these "unordered" operations provide limited ordering + in some special situations. + +Each of the above categories is described in more detail by one of the +following sections. + + +Barriers +======== + +Each of the following categories of barriers is described in its own +subsection below: + +a. Full memory barriers. + +b. Read-modify-write (RMW) ordering augmentation barriers. + +c. Write memory barrier. + +d. Read memory barrier. + +e. Compiler barrier. + +Note well that many of these primitives generate absolutely no code +in kernels built with CONFIG_SMP=n. Therefore, if you are writing +a device driver, which must correctly order accesses to a physical +device even in kernels built with CONFIG_SMP=n, please use the +ordering primitives provided for that purpose. For example, instead of +smp_mb(), use mb(). See the "Linux Kernel Device Drivers" book or the +https://lwn.net/Articles/698014/ article for more information. + + +Full Memory Barriers +-------------------- + +The Linux-kernel primitives that provide full ordering include: + +o The smp_mb() full memory barrier. + +o Value-returning RMW atomic operations whose names do not end in + _acquire, _release, or _relaxed. + +o RCU's grace-period primitives. + +First, the smp_mb() full memory barrier orders all of the CPU's prior +accesses against all subsequent accesses from the viewpoint of all CPUs. +In other words, all CPUs will agree that any earlier action taken +by that CPU happened before any later action taken by that same CPU. +For example, consider the following: + + WRITE_ONCE(x, 1); + smp_mb(); // Order store to x before load from y. + r1 = READ_ONCE(y); + +All CPUs will agree that the store to "x" happened before the load +from "y", as indicated by the comment. And yes, please comment your +memory-ordering primitives. It is surprisingly hard to remember their +purpose after even a few months. + +Second, some RMW atomic operations provide full ordering. These +operations include value-returning RMW atomic operations (that is, those +with non-void return types) whose names do not end in _acquire, _release, +or _relaxed. Examples include atomic_add_return(), atomic_dec_and_test(), +cmpxchg(), and xchg(). Note that conditional RMW atomic operations such +as cmpxchg() are only guaranteed to provide ordering when they succeed. +When RMW atomic operations provide full ordering, they partition the +CPU's accesses into three groups: + +1. All code that executed prior to the RMW atomic operation. + +2. The RMW atomic operation itself. + +3. All code that executed after the RMW atomic operation. + +All CPUs will agree that any operation in a given partition happened +before any operation in a higher-numbered partition. + +In contrast, non-value-returning RMW atomic operations (that is, those +with void return types) do not guarantee any ordering whatsoever. Nor do +value-returning RMW atomic operations whose names end in _relaxed. +Examples of the former include atomic_inc() and atomic_dec(), +while examples of the latter include atomic_cmpxchg_relaxed() and +atomic_xchg_relaxed(). Similarly, value-returning non-RMW atomic +operations such as atomic_read() do not guarantee full ordering, and +are covered in the later section on unordered operations. + +Value-returning RMW atomic operations whose names end in _acquire or +_release provide limited ordering, and will be described later in this +document. + +Finally, RCU's grace-period primitives provide full ordering. These +primitives include synchronize_rcu(), synchronize_rcu_expedited(), +synchronize_srcu() and so on. However, these primitives have orders +of magnitude greater overhead than smp_mb(), atomic_xchg(), and so on. +Furthermore, RCU's grace-period primitives can only be invoked in +sleepable contexts. Therefore, RCU's grace-period primitives are +typically instead used to provide ordering against RCU read-side critical +sections, as documented in their comment headers. But of course if you +need a synchronize_rcu() to interact with readers, it costs you nothing +to also rely on its additional full-memory-barrier semantics. Just please +carefully comment this, otherwise your future self will hate you. + + +RMW Ordering Augmentation Barriers +---------------------------------- + +As noted in the previous section, non-value-returning RMW operations +such as atomic_inc() and atomic_dec() guarantee no ordering whatsoever. +Nevertheless, a number of popular CPU families, including x86, provide +full ordering for these primitives. One way to obtain full ordering on +all architectures is to add a call to smp_mb(): + + WRITE_ONCE(x, 1); + atomic_inc(&my_counter); + smp_mb(); // Inefficient on x86!!! + r1 = READ_ONCE(y); + +This works, but the added smp_mb() adds needless overhead for +x86, on which atomic_inc() provides full ordering all by itself. +The smp_mb__after_atomic() primitive can be used instead: + + WRITE_ONCE(x, 1); + atomic_inc(&my_counter); + smp_mb__after_atomic(); // Order store to x before load from y. + r1 = READ_ONCE(y); + +The smp_mb__after_atomic() primitive emits code only on CPUs whose +atomic_inc() implementations do not guarantee full ordering, thus +incurring no unnecessary overhead on x86. There are a number of +variations on the smp_mb__*() theme: + +o smp_mb__before_atomic(), which provides full ordering prior + to an unordered RMW atomic operation. + +o smp_mb__after_atomic(), which, as shown above, provides full + ordering subsequent to an unordered RMW atomic operation. + +o smp_mb__after_spinlock(), which provides full ordering subsequent + to a successful spinlock acquisition. Note that spin_lock() is + always successful but spin_trylock() might not be. + +o smp_mb__after_srcu_read_unlock(), which provides full ordering + subsequent to an srcu_read_unlock(). + +It is bad practice to place code between the smp__*() primitive and the +operation whose ordering that it is augmenting. The reason is that the +ordering of this intervening code will differ from one CPU architecture +to another. + + +Write Memory Barrier +-------------------- + +The Linux kernel's write memory barrier is smp_wmb(). If a CPU executes +the following code: + + WRITE_ONCE(x, 1); + smp_wmb(); + WRITE_ONCE(y, 1); + +Then any given CPU will see the write to "x" has having happened before +the write to "y". However, you are usually better off using a release +store, as described in the "Release Operations" section below. + +Note that smp_wmb() might fail to provide ordering for unmarked C-language +stores because profile-driven optimization could determine that the +value being overwritten is almost always equal to the new value. Such a +compiler might then reasonably decide to transform "x = 1" and "y = 1" +as follows: + + if (x != 1) + x = 1; + smp_wmb(); // BUG: does not order the reads!!! + if (y != 1) + y = 1; + +Therefore, if you need to use smp_wmb() with unmarked C-language writes, +you will need to make sure that none of the compilers used to build +the Linux kernel carry out this sort of transformation, both now and in +the future. + + +Read Memory Barrier +------------------- + +The Linux kernel's read memory barrier is smp_rmb(). If a CPU executes +the following code: + + r0 = READ_ONCE(y); + smp_rmb(); + r1 = READ_ONCE(x); + +Then any given CPU will see the read from "y" as having preceded the read from +"x". However, you are usually better off using an acquire load, as described +in the "Acquire Operations" section below. + +Compiler Barrier +---------------- + +The Linux kernel's compiler barrier is barrier(). This primitive +prohibits compiler code-motion optimizations that might move memory +references across the point in the code containing the barrier(), but +does not constrain hardware memory ordering. For example, this can be +used to prevent to compiler from moving code across an infinite loop: + + WRITE_ONCE(x, 1); + while (dontstop) + barrier(); + r1 = READ_ONCE(y); + +Without the barrier(), the compiler would be within its rights to move the +WRITE_ONCE() to follow the loop. This code motion could be problematic +in the case where an interrupt handler terminates the loop. Another way +to handle this is to use READ_ONCE() for the load of "dontstop". + +Note that the barriers discussed previously use barrier() or its low-level +equivalent in their implementations. + + +Ordered Memory Accesses +======================= + +The Linux kernel provides a wide variety of ordered memory accesses: + +a. Release operations. + +b. Acquire operations. + +c. RCU read-side ordering. + +d. Control dependencies. + +Each of the above categories has its own section below. + + +Release Operations +------------------ + +Release operations include smp_store_release(), atomic_set_release(), +rcu_assign_pointer(), and value-returning RMW operations whose names +end in _release. These operations order their own store against all +of the CPU's prior memory accesses. Release operations often provide +improved readability and performance compared to explicit barriers. +For example, use of smp_store_release() saves a line compared to the +smp_wmb() example above: + + WRITE_ONCE(x, 1); + smp_store_release(&y, 1); + +More important, smp_store_release() makes it easier to connect up the +different pieces of the concurrent algorithm. The variable stored to +by the smp_store_release(), in this case "y", will normally be used in +an acquire operation in other parts of the concurrent algorithm. + +To see the performance advantages, suppose that the above example read +from "x" instead of writing to it. Then an smp_wmb() could not guarantee +ordering, and an smp_mb() would be needed instead: + + r1 = READ_ONCE(x); + smp_mb(); + WRITE_ONCE(y, 1); + +But smp_mb() often incurs much higher overhead than does +smp_store_release(), which still provides the needed ordering of "x" +against "y". On x86, the version using smp_store_release() might compile +to a simple load instruction followed by a simple store instruction. +In contrast, the smp_mb() compiles to an expensive instruction that +provides the needed ordering. + +There is a wide variety of release operations: + +o Store operations, including not only the aforementioned + smp_store_release(), but also atomic_set_release(), and + atomic_long_set_release(). + +o RCU's rcu_assign_pointer() operation. This is the same as + smp_store_release() except that: (1) It takes the pointer to + be assigned to instead of a pointer to that pointer, (2) It + is intended to be used in conjunction with rcu_dereference() + and similar rather than smp_load_acquire(), and (3) It checks + for an RCU-protected pointer in "sparse" runs. + +o Value-returning RMW operations whose names end in _release, + such as atomic_fetch_add_release() and cmpxchg_release(). + Note that release ordering is guaranteed only against the + memory-store portion of the RMW operation, and not against the + memory-load portion. Note also that conditional operations such + as cmpxchg_release() are only guaranteed to provide ordering + when they succeed. + +As mentioned earlier, release operations are often paired with acquire +operations, which are the subject of the next section. + + +Acquire Operations +------------------ + +Acquire operations include smp_load_acquire(), atomic_read_acquire(), +and value-returning RMW operations whose names end in _acquire. These +operations order their own load against all of the CPU's subsequent +memory accesses. Acquire operations often provide improved performance +and readability compared to explicit barriers. For example, use of +smp_load_acquire() saves a line compared to the smp_rmb() example above: + + r0 = smp_load_acquire(&y); + r1 = READ_ONCE(x); + +As with smp_store_release(), this also makes it easier to connect +the different pieces of the concurrent algorithm by looking for the +smp_store_release() that stores to "y". In addition, smp_load_acquire() +improves upon smp_rmb() by ordering against subsequent stores as well +as against subsequent loads. + +There are a couple of categories of acquire operations: + +o Load operations, including not only the aforementioned + smp_load_acquire(), but also atomic_read_acquire(), and + atomic64_read_acquire(). + +o Value-returning RMW operations whose names end in _acquire, + such as atomic_xchg_acquire() and atomic_cmpxchg_acquire(). + Note that acquire ordering is guaranteed only against the + memory-load portion of the RMW operation, and not against the + memory-store portion. Note also that conditional operations + such as atomic_cmpxchg_acquire() are only guaranteed to provide + ordering when they succeed. + +Symmetry being what it is, acquire operations are often paired with the +release operations covered earlier. For example, consider the following +example, where task0() and task1() execute concurrently: + + void task0(void) + { + WRITE_ONCE(x, 1); + smp_store_release(&y, 1); + } + + void task1(void) + { + r0 = smp_load_acquire(&y); + r1 = READ_ONCE(x); + } + +If "x" and "y" are both initially zero, then either r0's final value +will be zero or r1's final value will be one, thus providing the required +ordering. + + +RCU Read-Side Ordering +---------------------- + +This category includes read-side markers such as rcu_read_lock() +and rcu_read_unlock() as well as pointer-traversal primitives such as +rcu_dereference() and srcu_dereference(). + +Compared to locking primitives and RMW atomic operations, markers +for RCU read-side critical sections incur very low overhead because +they interact only with the corresponding grace-period primitives. +For example, the rcu_read_lock() and rcu_read_unlock() markers interact +with synchronize_rcu(), synchronize_rcu_expedited(), and call_rcu(). +The way this works is that if a given call to synchronize_rcu() cannot +prove that it started before a given call to rcu_read_lock(), then +that synchronize_rcu() must block until the matching rcu_read_unlock() +is reached. For more information, please see the synchronize_rcu() +docbook header comment and the material in Documentation/RCU. + +RCU's pointer-traversal primitives, including rcu_dereference() and +srcu_dereference(), order their load (which must be a pointer) against any +of the CPU's subsequent memory accesses whose address has been calculated +from the value loaded. There is said to be an *address dependency* +from the value returned by the rcu_dereference() or srcu_dereference() +to that subsequent memory access. + +A call to rcu_dereference() for a given RCU-protected pointer is +usually paired with a call to a call to rcu_assign_pointer() for that +same pointer in much the same way that a call to smp_load_acquire() is +paired with a call to smp_store_release(). Calls to rcu_dereference() +and rcu_assign_pointer are often buried in other APIs, for example, +the RCU list API members defined in include/linux/rculist.h. For more +information, please see the docbook headers in that file, the most +recent LWN article on the RCU API (https://lwn.net/Articles/777036/), +and of course the material in Documentation/RCU. + +If the pointer value is manipulated between the rcu_dereference() +that returned it and a later dereference(), please read +Documentation/RCU/rcu_dereference.rst. It can also be quite helpful to +review uses in the Linux kernel. + + +Control Dependencies +-------------------- + +A control dependency extends from a marked load (READ_ONCE() or stronger) +through an "if" condition to a marked store (WRITE_ONCE() or stronger) +that is executed only by one of the legs of that "if" statement. +Control dependencies are so named because they are mediated by +control-flow instructions such as comparisons and conditional branches. + +In short, you can use a control dependency to enforce ordering between +an READ_ONCE() and a WRITE_ONCE() when there is an "if" condition +between them. The canonical example is as follows: + + q = READ_ONCE(a); + if (q) + WRITE_ONCE(b, 1); + +In this case, all CPUs would see the read from "a" as happening before +the write to "b". + +However, control dependencies are easily destroyed by compiler +optimizations, so any use of control dependencies must take into account +all of the compilers used to build the Linux kernel. Please see the +"control-dependencies.txt" file for more information. + + +Unordered Accesses +================== + +Each of these two categories of unordered accesses has a section below: + +a. Unordered marked operations. + +b. Unmarked C-language accesses. + + +Unordered Marked Operations +--------------------------- + +Unordered operations to different variables are just that, unordered. +However, if a group of CPUs apply these operations to a single variable, +all the CPUs will agree on the operation order. Of course, the ordering +of unordered marked accesses can also be constrained using the mechanisms +described earlier in this document. + +These operations come in three categories: + +o Marked writes, such as WRITE_ONCE() and atomic_set(). These + primitives required the compiler to emit the corresponding store + instructions in the expected execution order, thus suppressing + a number of destructive optimizations. However, they provide no + hardware ordering guarantees, and in fact many CPUs will happily + reorder marked writes with each other or with other unordered + operations, unless these operations are to the same variable. + +o Marked reads, such as READ_ONCE() and atomic_read(). These + primitives required the compiler to emit the corresponding load + instructions in the expected execution order, thus suppressing + a number of destructive optimizations. However, they provide no + hardware ordering guarantees, and in fact many CPUs will happily + reorder marked reads with each other or with other unordered + operations, unless these operations are to the same variable. + +o Unordered RMW atomic operations. These are non-value-returning + RMW atomic operations whose names do not end in _acquire or + _release, and also value-returning RMW operations whose names + end in _relaxed. Examples include atomic_add(), atomic_or(), + and atomic64_fetch_xor_relaxed(). These operations do carry + out the specified RMW operation atomically, for example, five + concurrent atomic_inc() operations applied to a given variable + will reliably increase the value of that variable by five. + However, many CPUs will happily reorder these operations with + each other or with other unordered operations. + + This category of operations can be efficiently ordered using + smp_mb__before_atomic() and smp_mb__after_atomic(), as was + discussed in the "RMW Ordering Augmentation Barriers" section. + +In short, these operations can be freely reordered unless they are all +operating on a single variable or unless they are constrained by one of +the operations called out earlier in this document. + + +Unmarked C-Language Accesses +---------------------------- + +Unmarked C-language accesses are normal variable accesses to normal +variables, that is, to variables that are not "volatile" and are not +C11 atomic variables. These operations provide no ordering guarantees, +and further do not guarantee "atomic" access. For example, the compiler +might (and sometimes does) split a plain C-language store into multiple +smaller stores. A load from that same variable running on some other +CPU while such a store is executing might see a value that is a mashup +of the old value and the new value. + +Unmarked C-language accesses are unordered, and are also subject to +any number of compiler optimizations, many of which can break your +concurrent code. It is possible to used unmarked C-language accesses for +shared variables that are subject to concurrent access, but great care +is required on an ongoing basis. The compiler-constraining barrier() +primitive can be helpful, as can the various ordering primitives discussed +in this document. It nevertheless bears repeating that use of unmarked +C-language accesses requires careful attention to not just your code, +but to all the compilers that might be used to build it. Such compilers +might replace a series of loads with a single load, and might replace +a series of stores with a single store. Some compilers will even split +a single store into multiple smaller stores. + +But there are some ways of using unmarked C-language accesses for shared +variables without such worries: + +o Guard all accesses to a given variable by a particular lock, + so that there are never concurrent conflicting accesses to + that variable. (There are "conflicting accesses" when + (1) at least one of the concurrent accesses to a variable is an + unmarked C-language access and (2) when at least one of those + accesses is a write, whether marked or not.) + +o As above, but using other synchronization primitives such + as reader-writer locks or sequence locks. + +o Use locking or other means to ensure that all concurrent accesses + to a given variable are reads. + +o Restrict use of a given variable to statistics or heuristics + where the occasional bogus value can be tolerated. + +o Declare the accessed variables as C11 atomics. + https://lwn.net/Articles/691128/ + +o Declare the accessed variables as "volatile". + +If you need to live more dangerously, please do take the time to +understand the compilers. One place to start is these two LWN +articles: + +Who's afraid of a big bad optimizing compiler? + https://lwn.net/Articles/793253 +Calibrating your fear of big bad optimizing compilers + https://lwn.net/Articles/799218 + +Used properly, unmarked C-language accesses can reduce overhead on +fastpaths. However, the price is great care and continual attention +to your compiler as new versions come out and as new optimizations +are enabled. |