pm-graph v5.6

sleepgraph:
 - force usage of python3 instead of using system default
 - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
 - fix issue of platform info not being reset in -multi (logs fill up)
 - change -ftop call to "pm_suspend", this is one level below state_store
 - add -wificheck command to read out the current wifi device details
 - change -wifi behavior to poll /proc/net/wireless for wifi connect
 - add wifi reconnect time to timeline, include time in summary column
 - add "fail on wifi_resume" to timeline and summary when wifi fails
 - add a set of commands to collect data before/after suspend in the log
 - add "-cmdinfo" command which prints out all the data collected
 - check for cmd info tools at start, print found/missing in green/red
 - fix kernel suspend time calculation: tool used to look for start of
    pm_suspend_console, but the order has changed. latest kernel starts
    with ksys_sync, use this instead
 - include time spent in mem/disk in the header (same as freeze/standby)
 - ignore turbostat 32-bit capability warnings
 - print to result.txt when -skiphtml is used, just say result: pass
 - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
 - -multi argument supports duration as well as count: hours, minutes, seconds
 - update the -multi status output to be more informative
 - -maxfail sets maximum consecutive fails before a -multi run is aborted
 - in -summary, ignore dmesg/ftrace/html files that are 0 size

bootgraph:
 - force usage of python3 instead of using system default

README:
 - add endurance testing instructions

Makefile:
 - remove pycache on uninstall

Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

1 files changed, 49 insertions, 16 deletions

diff --git a/tools/power/pm-graph/sleepgraph.8 b/tools/power/pm-graph/sleepgraph.8
index 43aee64316df..5126271de98a 100644
--- a/tools/power/pm-graph/sleepgraph.8
+++ b/tools/power/pm-graph/sleepgraph.8
@@ -74,8 +74,10 @@ after the test is complete.
 Switch the display to the requested mode for the test using the xset command.
 This helps maintain the consistency of test data for better comparison.
 .TP
-\fB-skiphtml\fR
-Run the test and capture the trace logs, but skip the timeline generation.
+\fB-wifi\fR
+If a wifi connection is available, check that it reconnects after resume. Include
+the reconnect time in the total resume time calculation and treat wifi timeouts
+as resume failures.
 
 .SS "advanced"
 .TP
@@ -117,8 +119,24 @@ Include \fIt\fR ms delay before 1st suspend (default: 0 ms).
 Include \fIt\fR ms delay after last resume (default: 0 ms).
 .TP
 \fB-multi \fIn d\fR
-Execute \fIn\fR consecutive tests at \fId\fR seconds intervals. The outputs will
-be created in a new subdirectory with a summary page: suspend-xN-{date}-{time}.
+Used for endurance testing. If \fIn\fR is entirely numeric, it's treated as a count:
+Execute \fIn\fR consecutive tests at \fId\fR second intervals.
+If \fIn\fR is an integer followed by a "d", "h", or "m", it's treated as a duration:
+Execute tests continuously over \fIn\fR days, hours, or minutes at \fId\fR second intervals.
+The outputs will be created in a new subdirectory, for count: suspend-{date}-{time}-xN,
+for duration: suspend-{date}-{time}-Nm. When the multitest run is done, the \fI-summary\fR
+command is called automatically to create summary html files for all the data (unless you
+use \fI-skiphtml\fR). \fI-skiphtml\fR will speed up the testing by not creating timelines
+or summary html files. You can then run the tool again at a later time with \fI-summary\fR
+and \fI-genhtml\fR to create the timelines.
+.TP
+\fB-maxfail \fIn\fR
+Abort a -multi run after \fIn\fR consecutive fails. 0 means never abort (default = 0).
+.TP
+\fB-skiphtml\fR
+Run the test and capture the trace logs, but skip the timeline generation.
+You can generate the html timelines later with \fI-dmesg\fR & \fI-ftrace\fR, or
+by running \fI-summary\fR and \fI-genhtml\fR.
 
 .SS "ftrace debug"
 .TP
@@ -173,11 +191,20 @@ Set trace buffer size to N kilo-bytes (default: all of free memory up to 3GB)
 .SH COMMANDS
 .TP
 \fB-summary \fIindir\fR
-Create a summary page of all tests in \fIindir\fR. Creates summary.html
-in the current folder. The output page is a table of tests with
-suspend and resume values sorted by suspend mode, host, and kernel.
-Includes test averages by mode and links to the test html files.
-Use -genhtml to include tests with missing html.
+Create a set of summary pages for all tests in \fIindir\fR recursively.
+Creates summary.html, summary-issues.html, and summary-devices.html in the current folder.
+summary.html is a table of tests with relevant info sorted by kernel/host/mode,
+and links to the test html files. It identifies the minimum, maximum, and median
+suspend and resume times for you with highlights and links in the header.
+summary-issues.html is a list of kernel issues found in dmesg from all the tests.
+summary-devices.html is a list of devices and times from all the tests.
+
+Use \fI-genhtml\fR to regenerate any tests with missing html.
+.TP
+\fB-genhtml\fR
+Used with \fI-summary\fR to regenerate any missing html timelines from their
+dmesg and ftrace logs. This will require a significant amount of time if there
+are thousands of tests.
 .TP
 \fB-modes\fR
 List available suspend modes.
@@ -189,10 +216,7 @@ with any options you intend to use to see if they will work.
 \fB-fpdt\fR
 Print out the contents of the ACPI Firmware Performance Data Table.
 .TP
-\fB-battery\fR
-Print out battery status and current charge.
-.TP
-\fB-wifi\fR
+\fB-wificheck\fR
 Print out wifi status and connection details.
 .TP
 \fB-xon/-xoff/-xstandby/-xsuspend\fR
@@ -208,6 +232,9 @@ Print out system info extracted from BIOS. Reads /dev/mem directly instead of go
 \fB-devinfo\fR
 Print out the pm settings of all devices which support runtime suspend.
 .TP
+\fB-cmdinfo\fR
+Print out all the platform data collected from the system that makes it into the logs.
+.TP
 \fB-flist\fR
 Print the list of ftrace functions currently being captured. Functions
 that are not available as symbols in the current kernel are shown in red.
@@ -272,14 +299,20 @@ Run two suspends back to back, include a 500ms delay before, after, and in betwe
 .IP
 \f(CW$ sudo sleepgraph -m mem -rtcwake 15 -x2 -predelay 500 -x2delay 500 -postdelay 500\fR
 .PP
+Execute a suspend using a custom command.
+.IP
+\f(CW$ sudo sleepgraph -cmd "echo mem > /sys/power/state" -rtcwake 15\fR
+.PP
+
+.SS "endurance testing using -multi"
+.PP
 Do a batch run of 10 freezes with 30 seconds delay between runs.
 .IP
 \f(CW$ sudo sleepgraph -m freeze -rtcwake 15 -multi 10 30\fR
 .PP
-Execute a suspend using a custom command.
+Do a batch run of freezes for 24 hours.
 .IP
-\f(CW$ sudo sleepgraph -cmd "echo mem > /sys/power/state" -rtcwake 15\fR
-.PP
+\f(CW$ sudo sleepgraph -m freeze -rtcwake 15 -multi 24h 0\fR
 
 .SS "adding callgraph data"
 Add device callgraphs. Limit the trace depth and only show callgraphs 10ms or larger.