diff options
author | Mathieu Desnoyers <mathieu.desnoyers@efficios.com> | 2022-01-24 20:12:47 +0300 |
---|---|---|
committer | Peter Zijlstra <peterz@infradead.org> | 2022-02-02 15:11:36 +0300 |
commit | de6b52a21420a18dc8a36438d581efd1313d5fe3 (patch) | |
tree | 7afa290f7346a889c751368635fa87eac8d195bc /tools/testing/selftests/rseq/rseq-ppc.h | |
parent | 24d1136a29da5953de5c0cbc6c83eb62a1e0bf14 (diff) | |
download | linux-de6b52a21420a18dc8a36438d581efd1313d5fe3.tar.xz |
selftests/rseq: Fix ppc32 missing instruction selection "u" and "x" for load/store
Building the rseq basic test with
gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.12)
Target: powerpc-linux-gnu
leads to these errors:
/tmp/ccieEWxU.s: Assembler messages:
/tmp/ccieEWxU.s:118: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:118: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:121: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:121: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:626: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:626: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:629: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:629: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:735: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:735: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:738: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:738: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:741: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:741: Error: junk at end of line: `,8'
Makefile:581: recipe for target 'basic_percpu_ops_test.o' failed
Based on discussion with Linux powerpc maintainers and review of
the use of the "m" operand in powerpc kernel code, add the missing
%Un%Xn (where n is operand number) to the lwz, stw, ld, and std
instructions when used with "m" operands.
Using "WORD" to mean either a 32-bit or 64-bit type depending on
the architecture is misleading. The term "WORD" really means a
32-bit type in both 32-bit and 64-bit powerpc assembler. The intent
here is to wrap load/store to intptr_t into common macros for both
32-bit and 64-bit.
Rename the macros with a RSEQ_ prefix, and use the terms "INT"
for always 32-bit type, and "LONG" for architecture bitness-sized
type.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-10-mathieu.desnoyers@efficios.com
Diffstat (limited to 'tools/testing/selftests/rseq/rseq-ppc.h')
-rw-r--r-- | tools/testing/selftests/rseq/rseq-ppc.h | 55 |
1 files changed, 28 insertions, 27 deletions
diff --git a/tools/testing/selftests/rseq/rseq-ppc.h b/tools/testing/selftests/rseq/rseq-ppc.h index c4ba1375285d..87befda47ba4 100644 --- a/tools/testing/selftests/rseq/rseq-ppc.h +++ b/tools/testing/selftests/rseq/rseq-ppc.h @@ -47,10 +47,13 @@ do { \ #ifdef __PPC64__ -#define STORE_WORD "std " -#define LOAD_WORD "ld " -#define LOADX_WORD "ldx " -#define CMP_WORD "cmpd " +#define RSEQ_STORE_LONG(arg) "std%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* To memory ("m" constraint) */ +#define RSEQ_STORE_INT(arg) "stw%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* To memory ("m" constraint) */ +#define RSEQ_LOAD_LONG(arg) "ld%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* From memory ("m" constraint) */ +#define RSEQ_LOAD_INT(arg) "lwz%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* From memory ("m" constraint) */ +#define RSEQ_LOADX_LONG "ldx " /* From base register ("b" constraint) */ +#define RSEQ_CMP_LONG "cmpd " +#define RSEQ_CMP_LONG_INT "cmpdi " #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ @@ -89,10 +92,13 @@ do { \ #else /* #ifdef __PPC64__ */ -#define STORE_WORD "stw " -#define LOAD_WORD "lwz " -#define LOADX_WORD "lwzx " -#define CMP_WORD "cmpw " +#define RSEQ_STORE_LONG(arg) "stw%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* To memory ("m" constraint) */ +#define RSEQ_STORE_INT(arg) RSEQ_STORE_LONG(arg) /* To memory ("m" constraint) */ +#define RSEQ_LOAD_LONG(arg) "lwz%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* From memory ("m" constraint) */ +#define RSEQ_LOAD_INT(arg) RSEQ_LOAD_LONG(arg) /* From memory ("m" constraint) */ +#define RSEQ_LOADX_LONG "lwzx " /* From base register ("b" constraint) */ +#define RSEQ_CMP_LONG "cmpw " +#define RSEQ_CMP_LONG_INT "cmpwi " #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ @@ -125,7 +131,7 @@ do { \ RSEQ_INJECT_ASM(1) \ "lis %%r17, (" __rseq_str(cs_label) ")@ha\n\t" \ "addi %%r17, %%r17, (" __rseq_str(cs_label) ")@l\n\t" \ - "stw %%r17, %[" __rseq_str(rseq_cs) "]\n\t" \ + RSEQ_STORE_INT(rseq_cs) "%%r17, %[" __rseq_str(rseq_cs) "]\n\t" \ __rseq_str(label) ":\n\t" #endif /* #ifdef __PPC64__ */ @@ -136,7 +142,7 @@ do { \ #define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \ RSEQ_INJECT_ASM(2) \ - "lwz %%r17, %[" __rseq_str(current_cpu_id) "]\n\t" \ + RSEQ_LOAD_INT(current_cpu_id) "%%r17, %[" __rseq_str(current_cpu_id) "]\n\t" \ "cmpw cr7, %[" __rseq_str(cpu_id) "], %%r17\n\t" \ "bne- cr7, " __rseq_str(label) "\n\t" @@ -153,25 +159,25 @@ do { \ * RSEQ_ASM_OP_* (else): doesn't have hard-code registers(unless cr7) */ #define RSEQ_ASM_OP_CMPEQ(var, expect, label) \ - LOAD_WORD "%%r17, %[" __rseq_str(var) "]\n\t" \ - CMP_WORD "cr7, %%r17, %[" __rseq_str(expect) "]\n\t" \ + RSEQ_LOAD_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t" \ + RSEQ_CMP_LONG "cr7, %%r17, %[" __rseq_str(expect) "]\n\t" \ "bne- cr7, " __rseq_str(label) "\n\t" #define RSEQ_ASM_OP_CMPNE(var, expectnot, label) \ - LOAD_WORD "%%r17, %[" __rseq_str(var) "]\n\t" \ - CMP_WORD "cr7, %%r17, %[" __rseq_str(expectnot) "]\n\t" \ + RSEQ_LOAD_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t" \ + RSEQ_CMP_LONG "cr7, %%r17, %[" __rseq_str(expectnot) "]\n\t" \ "beq- cr7, " __rseq_str(label) "\n\t" #define RSEQ_ASM_OP_STORE(value, var) \ - STORE_WORD "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t" + RSEQ_STORE_LONG(var) "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t" /* Load @var to r17 */ #define RSEQ_ASM_OP_R_LOAD(var) \ - LOAD_WORD "%%r17, %[" __rseq_str(var) "]\n\t" + RSEQ_LOAD_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t" /* Store r17 to @var */ #define RSEQ_ASM_OP_R_STORE(var) \ - STORE_WORD "%%r17, %[" __rseq_str(var) "]\n\t" + RSEQ_STORE_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t" /* Add @count to r17 */ #define RSEQ_ASM_OP_R_ADD(count) \ @@ -179,11 +185,11 @@ do { \ /* Load (r17 + voffp) to r17 */ #define RSEQ_ASM_OP_R_LOADX(voffp) \ - LOADX_WORD "%%r17, %[" __rseq_str(voffp) "], %%r17\n\t" + RSEQ_LOADX_LONG "%%r17, %[" __rseq_str(voffp) "], %%r17\n\t" /* TODO: implement a faster memcpy. */ #define RSEQ_ASM_OP_R_MEMCPY() \ - "cmpdi %%r19, 0\n\t" \ + RSEQ_CMP_LONG_INT "%%r19, 0\n\t" \ "beq 333f\n\t" \ "addi %%r20, %%r20, -1\n\t" \ "addi %%r21, %%r21, -1\n\t" \ @@ -191,16 +197,16 @@ do { \ "lbzu %%r18, 1(%%r20)\n\t" \ "stbu %%r18, 1(%%r21)\n\t" \ "addi %%r19, %%r19, -1\n\t" \ - "cmpdi %%r19, 0\n\t" \ + RSEQ_CMP_LONG_INT "%%r19, 0\n\t" \ "bne 222b\n\t" \ "333:\n\t" \ #define RSEQ_ASM_OP_R_FINAL_STORE(var, post_commit_label) \ - STORE_WORD "%%r17, %[" __rseq_str(var) "]\n\t" \ + RSEQ_STORE_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t" \ __rseq_str(post_commit_label) ":\n\t" #define RSEQ_ASM_OP_FINAL_STORE(value, var, post_commit_label) \ - STORE_WORD "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t" \ + RSEQ_STORE_LONG(var) "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t" \ __rseq_str(post_commit_label) ":\n\t" static inline __attribute__((always_inline)) @@ -743,9 +749,4 @@ error2: #endif } -#undef STORE_WORD -#undef LOAD_WORD -#undef LOADX_WORD -#undef CMP_WORD - #endif /* !RSEQ_SKIP_FASTPATH */ |