selftests/sgx: Page removal stress test

Create enclave with additional heap that consumes all physical SGX
memory and then remove it.

Depending on the available SGX memory this test could take a
significant time to run (several minutes) as it (1) creates the
enclave, (2) changes the type of every page to be trimmed,
(3) enters the enclave once per page to run EACCEPT, before
(4) the pages are finally removed.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/e7c6aa2ab30cb1c41e52b776958409c06970d168.1652137848.git.reinette.chatre@intel.com

1 files changed, 120 insertions, 0 deletions

diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c
index ba16671aef79..9820b3809c69 100644
--- a/tools/testing/selftests/sgx/main.c
+++ b/tools/testing/selftests/sgx/main.c
@@ -378,7 +378,127 @@ TEST_F(enclave, unclobbered_vdso_oversubscribed)
 	EXPECT_EQ(get_op.value, MAGIC);
 	EXPECT_EEXIT(&self->run);
 	EXPECT_EQ(self->run.user_data, 0);
+}
+
+TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, 900)
+{
+	struct sgx_enclave_remove_pages remove_ioc;
+	struct sgx_enclave_modify_types modt_ioc;
+	struct encl_op_get_from_buf get_op;
+	struct encl_op_eaccept eaccept_op;
+	struct encl_op_put_to_buf put_op;
+	struct encl_segment *heap;
+	unsigned long total_mem;
+	int ret, errno_save;
+	unsigned long addr;
+	unsigned long i;
+
+	/*
+	 * Create enclave with additional heap that is as big as all
+	 * available physical SGX memory.
+	 */
+	total_mem = get_total_epc_mem();
+	ASSERT_NE(total_mem, 0);
+	TH_LOG("Creating an enclave with %lu bytes heap may take a while ...",
+	       total_mem);
+	ASSERT_TRUE(setup_test_encl(total_mem, &self->encl, _metadata));
+
+	/*
+	 * Hardware (SGX2) and kernel support is needed for this test. Start
+	 * with check that test has a chance of succeeding.
+	 */
+	memset(&modt_ioc, 0, sizeof(modt_ioc));
+	ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &modt_ioc);
+
+	if (ret == -1) {
+		if (errno == ENOTTY)
+			SKIP(return,
+			     "Kernel does not support SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl()");
+		else if (errno == ENODEV)
+			SKIP(return, "System does not support SGX2");
+	}
+
+	/*
+	 * Invalid parameters were provided during sanity check,
+	 * expect command to fail.
+	 */
+	EXPECT_EQ(ret, -1);
+
+	/* SGX2 is supported by kernel and hardware, test can proceed. */
+	memset(&self->run, 0, sizeof(self->run));
+	self->run.tcs = self->encl.encl_base;
+
+	heap = &self->encl.segment_tbl[self->encl.nr_segments - 1];
+
+	put_op.header.type = ENCL_OP_PUT_TO_BUFFER;
+	put_op.value = MAGIC;
+
+	EXPECT_EQ(ENCL_CALL(&put_op, &self->run, false), 0);
+
+	EXPECT_EEXIT(&self->run);
+	EXPECT_EQ(self->run.user_data, 0);
+
+	get_op.header.type = ENCL_OP_GET_FROM_BUFFER;
+	get_op.value = 0;
+
+	EXPECT_EQ(ENCL_CALL(&get_op, &self->run, false), 0);
+
+	EXPECT_EQ(get_op.value, MAGIC);
+	EXPECT_EEXIT(&self->run);
+	EXPECT_EQ(self->run.user_data, 0);
 
+	/* Trim entire heap. */
+	memset(&modt_ioc, 0, sizeof(modt_ioc));
+
+	modt_ioc.offset = heap->offset;
+	modt_ioc.length = heap->size;
+	modt_ioc.page_type = SGX_PAGE_TYPE_TRIM;
+
+	TH_LOG("Changing type of %zd bytes to trimmed may take a while ...",
+	       heap->size);
+	ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &modt_ioc);
+	errno_save = ret == -1 ? errno : 0;
+
+	EXPECT_EQ(ret, 0);
+	EXPECT_EQ(errno_save, 0);
+	EXPECT_EQ(modt_ioc.result, 0);
+	EXPECT_EQ(modt_ioc.count, heap->size);
+
+	/* EACCEPT all removed pages. */
+	addr = self->encl.encl_base + heap->offset;
+
+	eaccept_op.flags = SGX_SECINFO_TRIM | SGX_SECINFO_MODIFIED;
+	eaccept_op.header.type = ENCL_OP_EACCEPT;
+
+	TH_LOG("Entering enclave to run EACCEPT for each page of %zd bytes may take a while ...",
+	       heap->size);
+	for (i = 0; i < heap->size; i += 4096) {
+		eaccept_op.epc_addr = addr + i;
+		eaccept_op.ret = 0;
+
+		EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0);
+
+		EXPECT_EQ(self->run.exception_vector, 0);
+		EXPECT_EQ(self->run.exception_error_code, 0);
+		EXPECT_EQ(self->run.exception_addr, 0);
+		ASSERT_EQ(eaccept_op.ret, 0);
+		ASSERT_EQ(self->run.function, EEXIT);
+	}
+
+	/* Complete page removal. */
+	memset(&remove_ioc, 0, sizeof(remove_ioc));
+
+	remove_ioc.offset = heap->offset;
+	remove_ioc.length = heap->size;
+
+	TH_LOG("Removing %zd bytes from enclave may take a while ...",
+	       heap->size);
+	ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_REMOVE_PAGES, &remove_ioc);
+	errno_save = ret == -1 ? errno : 0;
+
+	EXPECT_EQ(ret, 0);
+	EXPECT_EQ(errno_save, 0);
+	EXPECT_EQ(remove_ioc.count, heap->size);
 }
 
 TEST_F(enclave, clobbered_vdso)