diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-02 02:33:53 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-02 02:33:53 +0300 |
commit | 46f876322820c189ab525cfcba2519a17dbc0a6f (patch) | |
tree | 324a1c3c0872bce82bac839f64816ee810e4b5bd /tools/testing | |
parent | 879dbe9ffebc1328717cd66eab7e4918a3f499bd (diff) | |
parent | e6359798f62da66a4a48061d2324a69ea59ff39b (diff) | |
download | linux-46f876322820c189ab525cfcba2519a17dbc0a6f.tar.xz |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's the usual summary below, but the highlights are support for
the Armv8.6 timer extensions, KASAN support for asymmetric MTE, the
ability to kexec() with the MMU enabled and a second attempt at
switching to the generic pfn_valid() implementation.
Summary:
- Support for the Arm8.6 timer extensions, including a
self-synchronising view of the system registers to elide some
expensive ISB instructions.
- Exception table cleanup and rework so that the fixup handlers
appear correctly in backtraces.
- A handful of miscellaneous changes, the main one being selection of
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK.
- More mm and pgtable cleanups.
- KASAN support for "asymmetric" MTE, where tag faults are reported
synchronously for loads (via an exception) and asynchronously for
stores (via a register).
- Support for leaving the MMU enabled during kexec relocation, which
significantly speeds up the operation.
- Minor improvements to our perf PMU drivers.
- Improvements to the compat vDSO build system, particularly when
building with LLVM=1.
- Preparatory work for handling some Coresight TRBE tracing errata.
- Cleanup and refactoring of the SVE code to pave the way for SME
support in future.
- Ensure SCS pages are unpoisoned immediately prior to freeing them
when KASAN is enabled for the vmalloc area.
- Try moving to the generic pfn_valid() implementation again now that
the DMA mapping issue from last time has been resolved.
- Numerous improvements and additions to our FPSIMD and SVE
selftests"
[ armv8.6 timer updates were in a shared branch and already came in
through -tip in the timer pull - Linus ]
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
arm64: Select POSIX_CPU_TIMERS_TASK_WORK
arm64: Document boot requirements for FEAT_SME_FA64
arm64/sve: Fix warnings when SVE is disabled
arm64/sve: Add stub for sve_max_virtualisable_vl()
arm64: errata: Add detection for TRBE write to out-of-range
arm64: errata: Add workaround for TSB flush failures
arm64: errata: Add detection for TRBE overwrite in FILL mode
arm64: Add Neoverse-N2, Cortex-A710 CPU part definition
selftests: arm64: Factor out utility functions for assembly FP tests
arm64: vmlinux.lds.S: remove `.fixup` section
arm64: extable: add load_unaligned_zeropad() handler
arm64: extable: add a dedicated uaccess handler
arm64: extable: add `type` and `data` fields
arm64: extable: use `ex` for `exception_table_entry`
arm64: extable: make fixup_exception() return bool
arm64: extable: consolidate definitions
arm64: gpr-num: support W registers
arm64: factor out GPR numbering helpers
arm64: kvm: use kvm_exception_table_entry
arm64: lib: __arch_copy_to_user(): fold fixups into body
...
Diffstat (limited to 'tools/testing')
-rw-r--r-- | tools/testing/selftests/arm64/fp/Makefile | 6 | ||||
-rw-r--r-- | tools/testing/selftests/arm64/fp/TODO | 9 | ||||
-rw-r--r-- | tools/testing/selftests/arm64/fp/asm-utils.S | 172 | ||||
-rw-r--r-- | tools/testing/selftests/arm64/fp/assembler.h | 11 | ||||
-rw-r--r-- | tools/testing/selftests/arm64/fp/fpsimd-test.S | 164 | ||||
-rw-r--r-- | tools/testing/selftests/arm64/fp/sve-ptrace-asm.S | 33 | ||||
-rw-r--r-- | tools/testing/selftests/arm64/fp/sve-ptrace.c | 511 | ||||
-rw-r--r-- | tools/testing/selftests/arm64/fp/sve-test.S | 163 | ||||
-rw-r--r-- | tools/testing/selftests/arm64/fp/vec-syscfg.c | 95 |
9 files changed, 640 insertions, 524 deletions
diff --git a/tools/testing/selftests/arm64/fp/Makefile b/tools/testing/selftests/arm64/fp/Makefile index f2abdd6ba12e..ba1488c7c315 100644 --- a/tools/testing/selftests/arm64/fp/Makefile +++ b/tools/testing/selftests/arm64/fp/Makefile @@ -9,12 +9,12 @@ TEST_PROGS_EXTENDED := fpsimd-test fpsimd-stress \ all: $(TEST_GEN_PROGS) $(TEST_PROGS_EXTENDED) -fpsimd-test: fpsimd-test.o +fpsimd-test: fpsimd-test.o asm-utils.o $(CC) -nostdlib $^ -o $@ rdvl-sve: rdvl-sve.o rdvl.o -sve-ptrace: sve-ptrace.o sve-ptrace-asm.o +sve-ptrace: sve-ptrace.o sve-probe-vls: sve-probe-vls.o rdvl.o -sve-test: sve-test.o +sve-test: sve-test.o asm-utils.o $(CC) -nostdlib $^ -o $@ vec-syscfg: vec-syscfg.o rdvl.o vlset: vlset.o diff --git a/tools/testing/selftests/arm64/fp/TODO b/tools/testing/selftests/arm64/fp/TODO index b6b7ebfcf362..44004e53da33 100644 --- a/tools/testing/selftests/arm64/fp/TODO +++ b/tools/testing/selftests/arm64/fp/TODO @@ -1,4 +1,7 @@ - Test unsupported values in the ABIs. -- More coverage for ptrace (eg, vector length conversions). -- Coverage for signals. -- Test PR_SVE_VL_INHERITY after a double fork. +- More coverage for ptrace: + - Get/set of FFR. + - Ensure ptraced processes actually see the register state visible through + the ptrace interface. + - Big endian. +- Test PR_SVE_VL_INHERIT after a double fork. diff --git a/tools/testing/selftests/arm64/fp/asm-utils.S b/tools/testing/selftests/arm64/fp/asm-utils.S new file mode 100644 index 000000000000..4b9728efc18d --- /dev/null +++ b/tools/testing/selftests/arm64/fp/asm-utils.S @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2015-2021 ARM Limited. +// Original author: Dave Martin <Dave.Martin@arm.com> +// +// Utility functions for assembly code. + +#include <asm/unistd.h> +#include "assembler.h" + +// Print a single character x0 to stdout +// Clobbers x0-x2,x8 +function putc + str x0, [sp, #-16]! + + mov x0, #1 // STDOUT_FILENO + mov x1, sp + mov x2, #1 + mov x8, #__NR_write + svc #0 + + add sp, sp, #16 + ret +endfunction +.globl putc + +// Print a NUL-terminated string starting at address x0 to stdout +// Clobbers x0-x3,x8 +function puts + mov x1, x0 + + mov x2, #0 +0: ldrb w3, [x0], #1 + cbz w3, 1f + add x2, x2, #1 + b 0b + +1: mov w0, #1 // STDOUT_FILENO + mov x8, #__NR_write + svc #0 + + ret +endfunction +.globl puts + +// Print an unsigned decimal number x0 to stdout +// Clobbers x0-x4,x8 +function putdec + mov x1, sp + str x30, [sp, #-32]! // Result can't be > 20 digits + + mov x2, #0 + strb w2, [x1, #-1]! // Write the NUL terminator + + mov x2, #10 +0: udiv x3, x0, x2 // div-mod loop to generate the digits + msub x0, x3, x2, x0 + add w0, w0, #'0' + strb w0, [x1, #-1]! + mov x0, x3 + cbnz x3, 0b + + ldrb w0, [x1] + cbnz w0, 1f + mov w0, #'0' // Print "0" for 0, not "" + strb w0, [x1, #-1]! + +1: mov x0, x1 + bl puts + + ldr x30, [sp], #32 + ret +endfunction +.globl putdec + +// Print an unsigned decimal number x0 to stdout, followed by a newline +// Clobbers x0-x5,x8 +function putdecn + mov x5, x30 + + bl putdec + mov x0, #'\n' + bl putc + + ret x5 +endfunction +.globl putdecn + +// Clobbers x0-x3,x8 +function puthexb + str x30, [sp, #-0x10]! + + mov w3, w0 + lsr w0, w0, #4 + bl puthexnibble + mov w0, w3 + + ldr x30, [sp], #0x10 + // fall through to puthexnibble +endfunction +.globl puthexb + +// Clobbers x0-x2,x8 +function puthexnibble + and w0, w0, #0xf + cmp w0, #10 + blo 1f + add w0, w0, #'a' - ('9' + 1) +1: add w0, w0, #'0' + b putc +endfunction +.globl puthexnibble + +// x0=data in, x1=size in, clobbers x0-x5,x8 +function dumphex + str x30, [sp, #-0x10]! + + mov x4, x0 + mov x5, x1 + +0: subs x5, x5, #1 + b.lo 1f + ldrb w0, [x4], #1 + bl puthexb + b 0b + +1: ldr x30, [sp], #0x10 + ret +endfunction +.globl dumphex + + // Trivial memory copy: copy x2 bytes, starting at address x1, to address x0. +// Clobbers x0-x3 +function memcpy + cmp x2, #0 + b.eq 1f +0: ldrb w3, [x1], #1 + strb w3, [x0], #1 + subs x2, x2, #1 + b.ne 0b +1: ret +endfunction +.globl memcpy + +// Fill x1 bytes starting at x0 with 0xae (for canary purposes) +// Clobbers x1, x2. +function memfill_ae + mov w2, #0xae + b memfill +endfunction +.globl memfill_ae + +// Fill x1 bytes starting at x0 with 0. +// Clobbers x1, x2. +function memclr + mov w2, #0 +endfunction +.globl memclr + // fall through to memfill + +// Trivial memory fill: fill x1 bytes starting at address x0 with byte w2 +// Clobbers x1 +function memfill + cmp x1, #0 + b.eq 1f + +0: strb w2, [x0], #1 + subs x1, x1, #1 + b.ne 0b + +1: ret +endfunction +.globl memfill diff --git a/tools/testing/selftests/arm64/fp/assembler.h b/tools/testing/selftests/arm64/fp/assembler.h index 8944f2189206..90bd433d2665 100644 --- a/tools/testing/selftests/arm64/fp/assembler.h +++ b/tools/testing/selftests/arm64/fp/assembler.h @@ -54,4 +54,15 @@ endfunction .purgem \name\()_entry .endm +// Utility macro to print a literal string +// Clobbers x0-x4,x8 +.macro puts string + .pushsection .rodata.str1.1, "aMS", 1 +.L__puts_literal\@: .string "\string" + .popsection + + ldr x0, =.L__puts_literal\@ + bl puts +.endm + #endif /* ! ASSEMBLER_H */ diff --git a/tools/testing/selftests/arm64/fp/fpsimd-test.S b/tools/testing/selftests/arm64/fp/fpsimd-test.S index 0dbd594c2747..e21e8ea52c7e 100644 --- a/tools/testing/selftests/arm64/fp/fpsimd-test.S +++ b/tools/testing/selftests/arm64/fp/fpsimd-test.S @@ -33,131 +33,6 @@ define_accessor setv, NVR, _vldr define_accessor getv, NVR, _vstr -// Print a single character x0 to stdout -// Clobbers x0-x2,x8 -function putc - str x0, [sp, #-16]! - - mov x0, #1 // STDOUT_FILENO - mov x1, sp - mov x2, #1 - mov x8, #__NR_write - svc #0 - - add sp, sp, #16 - ret -endfunction - -// Print a NUL-terminated string starting at address x0 to stdout -// Clobbers x0-x3,x8 -function puts - mov x1, x0 - - mov x2, #0 -0: ldrb w3, [x0], #1 - cbz w3, 1f - add x2, x2, #1 - b 0b - -1: mov w0, #1 // STDOUT_FILENO - mov x8, #__NR_write - svc #0 - - ret -endfunction - -// Utility macro to print a literal string -// Clobbers x0-x4,x8 -.macro puts string - .pushsection .rodata.str1.1, "aMS", 1 -.L__puts_literal\@: .string "\string" - .popsection - - ldr x0, =.L__puts_literal\@ - bl puts -.endm - -// Print an unsigned decimal number x0 to stdout -// Clobbers x0-x4,x8 -function putdec - mov x1, sp - str x30, [sp, #-32]! // Result can't be > 20 digits - - mov x2, #0 - strb w2, [x1, #-1]! // Write the NUL terminator - - mov x2, #10 -0: udiv x3, x0, x2 // div-mod loop to generate the digits - msub x0, x3, x2, x0 - add w0, w0, #'0' - strb w0, [x1, #-1]! - mov x0, x3 - cbnz x3, 0b - - ldrb w0, [x1] - cbnz w0, 1f - mov w0, #'0' // Print "0" for 0, not "" - strb w0, [x1, #-1]! - -1: mov x0, x1 - bl puts - - ldr x30, [sp], #32 - ret -endfunction - -// Print an unsigned decimal number x0 to stdout, followed by a newline -// Clobbers x0-x5,x8 -function putdecn - mov x5, x30 - - bl putdec - mov x0, #'\n' - bl putc - - ret x5 -endfunction - - -// Clobbers x0-x3,x8 -function puthexb - str x30, [sp, #-0x10]! - - mov w3, w0 - lsr w0, w0, #4 - bl puthexnibble - mov w0, w3 - - ldr x30, [sp], #0x10 - // fall through to puthexnibble -endfunction -// Clobbers x0-x2,x8 -function puthexnibble - and w0, w0, #0xf - cmp w0, #10 - blo 1f - add w0, w0, #'a' - ('9' + 1) -1: add w0, w0, #'0' - b putc -endfunction - -// x0=data in, x1=size in, clobbers x0-x5,x8 -function dumphex - str x30, [sp, #-0x10]! - - mov x4, x0 - mov x5, x1 - -0: subs x5, x5, #1 - b.lo 1f - ldrb w0, [x4], #1 - bl puthexb - b 0b - -1: ldr x30, [sp], #0x10 - ret -endfunction - // Declare some storate space to shadow the SVE register contents: .pushsection .text .data @@ -168,18 +43,6 @@ scratch: .space MAXVL_B .popsection -// Trivial memory copy: copy x2 bytes, starting at address x1, to address x0. -// Clobbers x0-x3 -function memcpy - cmp x2, #0 - b.eq 1f -0: ldrb w3, [x1], #1 - strb w3, [x0], #1 - subs x2, x2, #1 - b.ne 0b -1: ret -endfunction - // Generate a test pattern for storage in SVE registers // x0: pid (16 bits) // x1: register number (6 bits) @@ -227,33 +90,6 @@ function setup_vreg ret x4 endfunction -// Fill x1 bytes starting at x0 with 0xae (for canary purposes) -// Clobbers x1, x2. -function memfill_ae - mov w2, #0xae - b memfill -endfunction - -// Fill x1 bytes starting at x0 with 0. -// Clobbers x1, x2. -function memclr - mov w2, #0 -endfunction - // fall through to memfill - -// Trivial memory fill: fill x1 bytes starting at address x0 with byte w2 -// Clobbers x1 -function memfill - cmp x1, #0 - b.eq 1f - -0: strb w2, [x0], #1 - subs x1, x1, #1 - b.ne 0b - -1: ret -endfunction - // Trivial memory compare: compare x2 bytes starting at address x0 with // bytes starting at address x1. // Returns only if all bytes match; otherwise, the program is aborted. diff --git a/tools/testing/selftests/arm64/fp/sve-ptrace-asm.S b/tools/testing/selftests/arm64/fp/sve-ptrace-asm.S deleted file mode 100644 index 3e81f9fab574..000000000000 --- a/tools/testing/selftests/arm64/fp/sve-ptrace-asm.S +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -// Copyright (C) 2015-2019 ARM Limited. -// Original author: Dave Martin <Dave.Martin@arm.com> -#include <asm/unistd.h> - -.arch_extension sve - -.globl sve_store_patterns - -sve_store_patterns: - mov x1, x0 - - index z0.b, #0, #1 - str q0, [x1] - - mov w8, #__NR_getpid - svc #0 - str q0, [x1, #0x10] - - mov z1.d, z0.d - str q0, [x1, #0x20] - - mov w8, #__NR_getpid - svc #0 - str q0, [x1, #0x30] - - mov z1.d, z0.d - str q0, [x1, #0x40] - - ret - -.size sve_store_patterns, . - sve_store_patterns -.type sve_store_patterns, @function diff --git a/tools/testing/selftests/arm64/fp/sve-ptrace.c b/tools/testing/selftests/arm64/fp/sve-ptrace.c index 612d3899614a..c4417bc48d4f 100644 --- a/tools/testing/selftests/arm64/fp/sve-ptrace.c +++ b/tools/testing/selftests/arm64/fp/sve-ptrace.c @@ -1,15 +1,17 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2015-2020 ARM Limited. + * Copyright (C) 2015-2021 ARM Limited. * Original author: Dave Martin <Dave.Martin@arm.com> */ #include <errno.h> +#include <stdbool.h> #include <stddef.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/auxv.h> +#include <sys/prctl.h> #include <sys/ptrace.h> #include <sys/types.h> #include <sys/uio.h> @@ -19,40 +21,22 @@ #include "../../kselftest.h" +#define VL_TESTS (((SVE_VQ_MAX - SVE_VQ_MIN) + 1) * 3) +#define FPSIMD_TESTS 5 + +#define EXPECTED_TESTS (VL_TESTS + FPSIMD_TESTS) + /* <linux/elf.h> and <sys/auxv.h> don't like each other, so: */ #ifndef NT_ARM_SVE #define NT_ARM_SVE 0x405 #endif -/* Number of registers filled in by sve_store_patterns */ -#define NR_VREGS 5 - -void sve_store_patterns(__uint128_t v[NR_VREGS]); - -static void dump(const void *buf, size_t size) -{ - size_t i; - const unsigned char *p = buf; - - for (i = 0; i < size; ++i) - printf(" %.2x", *p++); -} - -static int check_vregs(const __uint128_t vregs[NR_VREGS]) +static void fill_buf(char *buf, size_t size) { int i; - int ok = 1; - - for (i = 0; i < NR_VREGS; ++i) { - printf("# v[%d]:", i); - dump(&vregs[i], sizeof vregs[i]); - putchar('\n'); - - if (vregs[i] != vregs[0]) - ok = 0; - } - return ok; + for (i = 0; i < size; i++) + buf[i] = random(); } static int do_child(void) @@ -66,6 +50,15 @@ static int do_child(void) return EXIT_SUCCESS; } +static int get_fpsimd(pid_t pid, struct user_fpsimd_state *fpsimd) +{ + struct iovec iov; + + iov.iov_base = fpsimd; + iov.iov_len = sizeof(*fpsimd); + return ptrace(PTRACE_GETREGSET, pid, NT_PRFPREG, &iov); +} + static struct user_sve_header *get_sve(pid_t pid, void **buf, size_t *size) { struct user_sve_header *sve; @@ -112,25 +105,335 @@ static int set_sve(pid_t pid, const struct user_sve_header *sve) return ptrace(PTRACE_SETREGSET, pid, NT_ARM_SVE, &iov); } -static void dump_sve_regs(const struct user_sve_header *sve, unsigned int num, - unsigned int vlmax) +/* Validate setting and getting the inherit flag */ +static void ptrace_set_get_inherit(pid_t child) +{ + struct user_sve_header sve; + struct user_sve_header *new_sve = NULL; + size_t new_sve_size = 0; + int ret; + + /* First set the flag */ + memset(&sve, 0, sizeof(sve)); + sve.size = sizeof(sve); + sve.vl = sve_vl_from_vq(SVE_VQ_MIN); + sve.flags = SVE_PT_VL_INHERIT; + ret = set_sve(child, &sve); + if (ret != 0) { + ksft_test_result_fail("Failed to set SVE_PT_VL_INHERIT\n"); + return; + } + + /* + * Read back the new register state and verify that we have + * set the flags we expected. + */ + if (!get_sve(child, (void **)&new_sve, &new_sve_size)) { + ksft_test_result_fail("Failed to read SVE flags\n"); + return; + } + + ksft_test_result(new_sve->flags & SVE_PT_VL_INHERIT, + "SVE_PT_VL_INHERIT set\n"); + + /* Now clear */ + sve.flags &= ~SVE_PT_VL_INHERIT; + ret = set_sve(child, &sve); + if (ret != 0) { + ksft_test_result_fail("Failed to clear SVE_PT_VL_INHERIT\n"); + return; + } + + if (!get_sve(child, (void **)&new_sve, &new_sve_size)) { + ksft_test_result_fail("Failed to read SVE flags\n"); + return; + } + + ksft_test_result(!(new_sve->flags & SVE_PT_VL_INHERIT), + "SVE_PT_VL_INHERIT cleared\n"); + + free(new_sve); +} + +/* Validate attempting to set the specfied VL via ptrace */ +static void ptrace_set_get_vl(pid_t child, unsigned int vl, bool *supported) +{ + struct user_sve_header sve; + struct user_sve_header *new_sve = NULL; + size_t new_sve_size = 0; + int ret, prctl_vl; + + *supported = false; + + /* Check if the VL is supported in this process */ + prctl_vl = prctl(PR_SVE_SET_VL, vl); + if (prctl_vl == -1) + ksft_exit_fail_msg("prctl(PR_SVE_SET_VL) failed: %s (%d)\n", + strerror(errno), errno); + + /* If the VL is not supported then a supported VL will be returned */ + *supported = (prctl_vl == vl); + + /* Set the VL by doing a set with no register payload */ + memset(&sve, 0, sizeof(sve)); + sve.size = sizeof(sve); + sve.vl = vl; + ret = set_sve(child, &sve); + if (ret != 0) { + ksft_test_result_fail("Failed to set VL %u\n", vl); + return; + } + + /* + * Read back the new register state and verify that we have the + * same VL that we got from prctl() on ourselves. + */ + if (!get_sve(child, (void **)&new_sve, &new_sve_size)) { + ksft_test_result_fail("Failed to read VL %u\n", vl); + return; + } + + ksft_test_result(new_sve->vl = prctl_vl, "Set VL %u\n", vl); + + free(new_sve); +} + +static void check_u32(unsigned int vl, const char *reg, + uint32_t *in, uint32_t *out, int *errors) +{ + if (*in != *out) { + printf("# VL %d %s wrote %x read %x\n", + vl, reg, *in, *out); + (*errors)++; + } +} + +/* Access the FPSIMD registers via the SVE regset */ +static void ptrace_sve_fpsimd(pid_t child) { - unsigned int vq; - unsigned int i; + void *svebuf = NULL; + size_t svebufsz = 0; + struct user_sve_header *sve; + struct user_fpsimd_state *fpsimd, new_fpsimd; + unsigned int i, j; + unsigned char *p; + + /* New process should start with FPSIMD registers only */ + sve = get_sve(child, &svebuf, &svebufsz); + if (!sve) { + ksft_test_result_fail("get_sve: %s\n", strerror(errno)); + + return; + } else { + ksft_test_result_pass("get_sve(FPSIMD)\n"); + } - if ((sve->flags & SVE_PT_REGS_MASK) != SVE_PT_REGS_SVE) - ksft_exit_fail_msg("Dumping non-SVE register\n"); + ksft_test_result((sve->flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD, + "Set FPSIMD registers\n"); + if ((sve->flags & SVE_PT_REGS_MASK) != SVE_PT_REGS_FPSIMD) + goto out; - if (vlmax > sve->vl) - vlmax = sve->vl; + /* Try to set a known FPSIMD state via PT_REGS_SVE */ + fpsimd = (struct user_fpsimd_state *)((char *)sve + + SVE_PT_FPSIMD_OFFSET); + for (i = 0; i < 32; ++i) { + p = (unsigned char *)&fpsimd->vregs[i]; - vq = sve_vq_from_vl(sve->vl); - for (i = 0; i < num; ++i) { - printf("# z%u:", i); - dump((const char *)sve + SVE_PT_SVE_ZREG_OFFSET(vq, i), - vlmax); - printf("%s\n", vlmax == sve->vl ? "" : " ..."); + for (j = 0; j < sizeof(fpsimd->vregs[i]); ++j) + p[j] = j; } + + if (set_sve(child, sve)) { + ksft_test_result_fail("set_sve(FPSIMD): %s\n", + strerror(errno)); + + goto out; + } + + /* Verify via the FPSIMD regset */ + if (get_fpsimd(child, &new_fpsimd)) { + ksft_test_result_fail("get_fpsimd(): %s\n", + strerror(errno)); + goto out; + } + if (memcmp(fpsimd, &new_fpsimd, sizeof(*fpsimd)) == 0) + ksft_test_result_pass("get_fpsimd() gave same state\n"); + else + ksft_test_result_fail("get_fpsimd() gave different state\n"); + +out: + free(svebuf); +} + +/* Validate attempting to set SVE data and read SVE data */ +static void ptrace_set_sve_get_sve_data(pid_t child, unsigned int vl) +{ + void *write_buf; + void *read_buf = NULL; + struct user_sve_header *write_sve; + struct user_sve_header *read_sve; + size_t read_sve_size = 0; + unsigned int vq = sve_vq_from_vl(vl); + int ret, i; + size_t data_size; + int errors = 0; + + data_size = SVE_PT_SVE_OFFSET + SVE_PT_SVE_SIZE(vq, SVE_PT_REGS_SVE); + write_buf = malloc(data_size); + if (!write_buf) { + ksft_test_result_fail("Error allocating %d byte buffer for VL %u\n", + data_size, vl); + return; + } + write_sve = write_buf; + + /* Set up some data and write it out */ + memset(write_sve, 0, data_size); + write_sve->size = data_size; + write_sve->vl = vl; + write_sve->flags = SVE_PT_REGS_SVE; + + for (i = 0; i < __SVE_NUM_ZREGS; i++) + fill_buf(write_buf + SVE_PT_SVE_ZREG_OFFSET(vq, i), + SVE_PT_SVE_ZREG_SIZE(vq)); + + for (i = 0; i < __SVE_NUM_PREGS; i++) + fill_buf(write_buf + SVE_PT_SVE_PREG_OFFSET(vq, i), + SVE_PT_SVE_PREG_SIZE(vq)); + + fill_buf(write_buf + SVE_PT_SVE_FPSR_OFFSET(vq), SVE_PT_SVE_FPSR_SIZE); + fill_buf(write_buf + SVE_PT_SVE_FPCR_OFFSET(vq), SVE_PT_SVE_FPCR_SIZE); + + /* TODO: Generate a valid FFR pattern */ + + ret = set_sve(child, write_sve); + if (ret != 0) { + ksft_test_result_fail("Failed to set VL %u data\n", vl); + goto out; + } + + /* Read the data back */ + if (!get_sve(child, (void **)&read_buf, &read_sve_size)) { + ksft_test_result_fail("Failed to read VL %u data\n", vl); + goto out; + } + read_sve = read_buf; + + /* We might read more data if there's extensions we don't know */ + if (read_sve->size < write_sve->size) { + ksft_test_result_fail("Wrote %d bytes, only read %d\n", + write_sve->size, read_sve->size); + goto out_read; + } + + for (i = 0; i < __SVE_NUM_ZREGS; i++) { + if (memcmp(write_buf + SVE_PT_SVE_ZREG_OFFSET(vq, i), + read_buf + SVE_PT_SVE_ZREG_OFFSET(vq, i), + SVE_PT_SVE_ZREG_SIZE(vq)) != 0) { + printf("# Mismatch in %u Z%d\n", vl, i); + errors++; + } + } + + for (i = 0; i < __SVE_NUM_PREGS; i++) { + if (memcmp(write_buf + SVE_PT_SVE_PREG_OFFSET(vq, i), + read_buf + SVE_PT_SVE_PREG_OFFSET(vq, i), + SVE_PT_SVE_PREG_SIZE(vq)) != 0) { + printf("# Mismatch in %u P%d\n", vl, i); + errors++; + } + } + + check_u32(vl, "FPSR", write_buf + SVE_PT_SVE_FPSR_OFFSET(vq), + read_buf + SVE_PT_SVE_FPSR_OFFSET(vq), &errors); + check_u32(vl, "FPCR", write_buf + SVE_PT_SVE_FPCR_OFFSET(vq), + read_buf + SVE_PT_SVE_FPCR_OFFSET(vq), &errors); + + ksft_test_result(errors == 0, "Set and get SVE data for VL %u\n", vl); + +out_read: + free(read_buf); +out: + free(write_buf); +} + +/* Validate attempting to set SVE data and read SVE data */ +static void ptrace_set_sve_get_fpsimd_data(pid_t child, unsigned int vl) +{ + void *write_buf; + struct user_sve_header *write_sve; + unsigned int vq = sve_vq_from_vl(vl); + struct user_fpsimd_state fpsimd_state; + int ret, i; + size_t data_size; + int errors = 0; + + if (__BYTE_ORDER == __BIG_ENDIAN) { + ksft_test_result_skip("Big endian not supported\n"); + return; + } + + data_size = SVE_PT_SVE_OFFSET + SVE_PT_SVE_SIZE(vq, SVE_PT_REGS_SVE); + write_buf = malloc(data_size); + if (!write_buf) { + ksft_test_result_fail("Error allocating %d byte buffer for VL %u\n", + data_size, vl); + return; + } + write_sve = write_buf; + + /* Set up some data and write it out */ + memset(write_sve, 0, data_size); + write_sve->size = data_size; + write_sve->vl = vl; + write_sve->flags = SVE_PT_REGS_SVE; + + for (i = 0; i < __SVE_NUM_ZREGS; i++) + fill_buf(write_buf + SVE_PT_SVE_ZREG_OFFSET(vq, i), + SVE_PT_SVE_ZREG_SIZE(vq)); + + fill_buf(write_buf + SVE_PT_SVE_FPSR_OFFSET(vq), SVE_PT_SVE_FPSR_SIZE); + fill_buf(write_buf + SVE_PT_SVE_FPCR_OFFSET(vq), SVE_PT_SVE_FPCR_SIZE); + + ret = set_sve(child, write_sve); + if (ret != 0) { + ksft_test_result_fail("Failed to set VL %u data\n", vl); + goto out; + } + + /* Read the data back */ + if (get_fpsimd(child, &fpsimd_state)) { + ksft_test_result_fail("Failed to read VL %u FPSIMD data\n", + vl); + goto out; + } + + for (i = 0; i < __SVE_NUM_ZREGS; i++) { + __uint128_t tmp = 0; + + /* + * Z regs are stored endianness invariant, this won't + * work for big endian + */ + memcpy(&tmp, write_buf + SVE_PT_SVE_ZREG_OFFSET(vq, i), + sizeof(tmp)); + + if (tmp != fpsimd_state.vregs[i]) { + printf("# Mismatch in FPSIMD for VL %u Z%d\n", vl, i); + errors++; + } + } + + check_u32(vl, "FPSR", write_buf + SVE_PT_SVE_FPSR_OFFSET(vq), + &fpsimd_state.fpsr, &errors); + check_u32(vl, "FPCR", write_buf + SVE_PT_SVE_FPCR_OFFSET(vq), + &fpsimd_state.fpcr, &errors); + + ksft_test_result(errors == 0, "Set and get FPSIMD data for VL %u\n", + vl); + +out: + free(write_buf); } static int do_parent(pid_t child) @@ -139,13 +442,8 @@ static int do_parent(pid_t child) pid_t pid; int status; siginfo_t si; - void *svebuf = NULL, *newsvebuf; - size_t svebufsz = 0, newsvebufsz; - struct user_sve_header *sve, *new_sve; - struct user_fpsimd_state *fpsimd; - unsigned int i, j; - unsigned char *p; - unsigned int vq; + unsigned int vq, vl; + bool vl_supported; /* Attach to the child */ while (1) { @@ -167,8 +465,6 @@ static int do_parent(pid_t child) if (WIFEXITED(status) || WIFSIGNALED(status)) ksft_exit_fail_msg("Child died unexpectedly\n"); - ksft_test_result(WIFSTOPPED(status), "WIFSTOPPED(%d)\n", - status); if (!WIFSTOPPED(status)) goto error; @@ -203,98 +499,27 @@ static int do_parent(pid_t child) } } - sve = get_sve(pid, &svebuf, &svebufsz); - if (!sve) { - int e = errno; + /* FPSIMD via SVE regset */ + ptrace_sve_fpsimd(child); - ksft_test_result_fail("get_sve: %s\n", strerror(errno)); - if (e == ESRCH) - goto disappeared; + /* prctl() flags */ + ptrace_set_get_inherit(child); - goto error; - } else { - ksft_test_result_pass("get_sve\n"); - } - - ksft_test_result((sve->flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD, - "FPSIMD registers\n"); - if ((sve->flags & SVE_PT_REGS_MASK) != SVE_PT_REGS_FPSIMD) - goto error; - - fpsimd = (struct user_fpsimd_state *)((char *)sve + - SVE_PT_FPSIMD_OFFSET); - for (i = 0; i < 32; ++i) { - p = (unsigned char *)&fpsimd->vregs[i]; - - for (j = 0; j < sizeof fpsimd->vregs[i]; ++j) - p[j] = j; - } - - if (set_sve(pid, sve)) { - int e = errno; - - ksft_test_result_fail("set_sve(FPSIMD): %s\n", - strerror(errno)); - if (e == ESRCH) - goto disappeared; - - goto error; - } + /* Step through every possible VQ */ + for (vq = SVE_VQ_MIN; vq <= SVE_VQ_MAX; vq++) { + vl = sve_vl_from_vq(vq); - vq = sve_vq_from_vl(sve->vl); + /* First, try to set this vector length */ + ptrace_set_get_vl(child, vl, &vl_supported); - newsvebufsz = SVE_PT_SVE_ZREG_OFFSET(vq, 1); - new_sve = newsvebuf = malloc(newsvebufsz); - if (!new_sve) { - errno = ENOMEM; - perror(NULL); - goto error; - } - - *new_sve = *sve; - new_sve->flags &= ~SVE_PT_REGS_MASK; - new_sve->flags |= SVE_PT_REGS_SVE; - memset((char *)new_sve + SVE_PT_SVE_ZREG_OFFSET(vq, 0), - 0, SVE_PT_SVE_ZREG_SIZE(vq)); - new_sve->size = SVE_PT_SVE_ZREG_OFFSET(vq, 1); - if (set_sve(pid, new_sve)) { - int e = errno; - - ksft_test_result_fail("set_sve(ZREG): %s\n", strerror(errno)); - if (e == ESRCH) - goto disappeared; - - goto error; - } - - new_sve = get_sve(pid, &newsvebuf, &newsvebufsz); - if (!new_sve) { - int e = errno; - - ksft_test_result_fail("get_sve(ZREG): %s\n", strerror(errno)); - if (e == ESRCH) - goto disappeared; - - goto error; - } - - ksft_test_result((new_sve->flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_SVE, - "SVE registers\n"); - if ((new_sve->flags & SVE_PT_REGS_MASK) != SVE_PT_REGS_SVE) - goto error; - - dump_sve_regs(new_sve, 3, sizeof fpsimd->vregs[0]); - - p = (unsigned char *)new_sve + SVE_PT_SVE_ZREG_OFFSET(vq, 1); - for (i = 0; i < sizeof fpsimd->vregs[0]; ++i) { - unsigned char expected = i; - - if (__BYTE_ORDER == __BIG_ENDIAN) - expected = sizeof fpsimd->vregs[0] - 1 - expected; - - ksft_test_result(p[i] == expected, "p[%d] == expected\n", i); - if (p[i] != expected) - goto error; + /* If the VL is supported validate data set/get */ + if (vl_supported) { + ptrace_set_sve_get_sve_data(child, vl); + ptrace_set_sve_get_fpsimd_data(child, vl); + } else { + ksft_test_result_skip("set SVE get SVE for VL %d\n", vl); + ksft_test_result_skip("set SVE get FPSIMD for VL %d\n", vl); + } } ret = EXIT_SUCCESS; @@ -309,20 +534,16 @@ disappeared: int main(void) { int ret = EXIT_SUCCESS; - __uint128_t v[NR_VREGS]; pid_t child; + srandom(getpid()); + ksft_print_header(); - ksft_set_plan(20); + ksft_set_plan(EXPECTED_TESTS); if (!(getauxval(AT_HWCAP) & HWCAP_SVE)) ksft_exit_skip("SVE not available\n"); - sve_store_patterns(v); - - if (!check_vregs(v)) - ksft_exit_fail_msg("Initial check_vregs() failed\n"); - child = fork(); if (!child) return do_child(); diff --git a/tools/testing/selftests/arm64/fp/sve-test.S b/tools/testing/selftests/arm64/fp/sve-test.S index e3e08d9c7020..f5b1b48ffff2 100644 --- a/tools/testing/selftests/arm64/fp/sve-test.S +++ b/tools/testing/selftests/arm64/fp/sve-test.S @@ -46,130 +46,6 @@ define_accessor getz, NZR, _sve_str_v define_accessor setp, NPR, _sve_ldr_p define_accessor getp, NPR, _sve_str_p -// Print a single character x0 to stdout -// Clobbers x0-x2,x8 -function putc - str x0, [sp, #-16]! - - mov x0, #1 // STDOUT_FILENO - mov x1, sp - mov x2, #1 - mov x8, #__NR_write - svc #0 - - add sp, sp, #16 - ret -endfunction - -// Print a NUL-terminated string starting at address x0 to stdout -// Clobbers x0-x3,x8 -function puts - mov x1, x0 - - mov x2, #0 -0: ldrb w3, [x0], #1 - cbz w3, 1f - add x2, x2, #1 - b 0b - -1: mov w0, #1 // STDOUT_FILENO - mov x8, #__NR_write - svc #0 - - ret -endfunction - -// Utility macro to print a literal string -// Clobbers x0-x4,x8 -.macro puts string - .pushsection .rodata.str1.1, "aMS", 1 -.L__puts_literal\@: .string "\string" - .popsection - - ldr x0, =.L__puts_literal\@ - bl puts -.endm - -// Print an unsigned decimal number x0 to stdout -// Clobbers x0-x4,x8 -function putdec - mov x1, sp - str x30, [sp, #-32]! // Result can't be > 20 digits - - mov x2, #0 - strb w2, [x1, #-1]! // Write the NUL terminator - - mov x2, #10 -0: udiv x3, x0, x2 // div-mod loop to generate the digits - msub x0, x3, x2, x0 - add w0, w0, #'0' - strb w0, [x1, #-1]! - mov x0, x3 - cbnz x3, 0b - - ldrb w0, [x1] - cbnz w0, 1f - mov w0, #'0' // Print "0" for 0, not "" - strb w0, [x1, #-1]! - -1: mov x0, x1 - bl puts - - ldr x30, [sp], #32 - ret -endfunction - -// Print an unsigned decimal number x0 to stdout, followed by a newline -// Clobbers x0-x5,x8 -function putdecn - mov x5, x30 - - bl putdec - mov x0, #'\n' - bl putc - - ret x5 -endfunction - -// Clobbers x0-x3,x8 -function puthexb - str x30, [sp, #-0x10]! - - mov w3, w0 - lsr w0, w0, #4 - bl puthexnibble - mov w0, w3 - - ldr x30, [sp], #0x10 - // fall through to puthexnibble -endfunction -// Clobbers x0-x2,x8 -function puthexnibble - and w0, w0, #0xf - cmp w0, #10 - blo 1f - add w0, w0, #'a' - ('9' + 1) -1: add w0, w0, #'0' - b putc -endfunction - -// x0=data in, x1=size in, clobbers x0-x5,x8 -function dumphex - str x30, [sp, #-0x10]! - - mov x4, x0 - mov x5, x1 - -0: subs x5, x5, #1 - b.lo 1f - ldrb w0, [x4], #1 - bl puthexb - b 0b - -1: ldr x30, [sp], #0x10 - ret -endfunction - // Declare some storate space to shadow the SVE register contents: .pushsection .text .data @@ -184,18 +60,6 @@ scratch: .space MAXVL_B .popsection -// Trivial memory copy: copy x2 bytes, starting at address x1, to address x0. -// Clobbers x0-x3 -function memcpy - cmp x2, #0 - b.eq 1f -0: ldrb w3, [x1], #1 - strb w3, [x0], #1 - subs x2, x2, #1 - b.ne 0b -1: ret -endfunction - // Generate a test pattern for storage in SVE registers // x0: pid (16 bits) // x1: register number (6 bits) @@ -316,33 +180,6 @@ function setup_ffr ret x4 endfunction -// Fill x1 bytes starting at x0 with 0xae (for canary purposes) -// Clobbers x1, x2. -function memfill_ae - mov w2, #0xae - b memfill -endfunction - -// Fill x1 bytes starting at x0 with 0. -// Clobbers x1, x2. -function memclr - mov w2, #0 -endfunction - // fall through to memfill - -// Trivial memory fill: fill x1 bytes starting at address x0 with byte w2 -// Clobbers x1 -function memfill - cmp x1, #0 - b.eq 1f - -0: strb w2, [x0], #1 - subs x1, x1, #1 - b.ne 0b - -1: ret -endfunction - // Trivial memory compare: compare x2 bytes starting at address x0 with // bytes starting at address x1. // Returns only if all bytes match; otherwise, the program is aborted. diff --git a/tools/testing/selftests/arm64/fp/vec-syscfg.c b/tools/testing/selftests/arm64/fp/vec-syscfg.c index c02071dcb563..272b888e018e 100644 --- a/tools/testing/selftests/arm64/fp/vec-syscfg.c +++ b/tools/testing/selftests/arm64/fp/vec-syscfg.c @@ -109,7 +109,7 @@ static int get_child_rdvl(struct vec_data *data) /* exec() a new binary which puts the VL on stdout */ ret = execl(data->rdvl_binary, data->rdvl_binary, NULL); - fprintf(stderr, "execl(%s) failed: %d\n", + fprintf(stderr, "execl(%s) failed: %d (%s)\n", data->rdvl_binary, errno, strerror(errno)); exit(EXIT_FAILURE); @@ -180,7 +180,6 @@ static int file_read_integer(const char *name, int *val) static int file_write_integer(const char *name, int val) { FILE *f; - int ret; f = fopen(name, "w"); if (!f) { @@ -192,11 +191,6 @@ static int file_write_integer(const char *name, int val) fprintf(f, "%d", val); fclose(f); - if (ret < 0) { - ksft_test_result_fail("Error writing %d to %s\n", - val, name); - return -1; - } return 0; } @@ -335,12 +329,9 @@ static void prctl_set_same(struct vec_data *data) return; } - if (cur_vl != data->rdvl()) - ksft_test_result_pass("%s current VL is %d\n", - data->name, ret); - else - ksft_test_result_fail("%s prctl() VL %d but RDVL is %d\n", - data->name, ret, data->rdvl()); + ksft_test_result(cur_vl == data->rdvl(), + "%s set VL %d and have VL %d\n", + data->name, cur_vl, data->rdvl()); } /* Can we set a new VL for this process? */ @@ -549,6 +540,82 @@ static void prctl_set_onexec(struct vec_data *data) file_write_integer(data->default_vl_file, data->default_vl); } +/* For each VQ verify that setting via prctl() does the right thing */ +static void prctl_set_all_vqs(struct vec_data *data) +{ + int ret, vq, vl, new_vl; + int errors = 0; + + if (!data->min_vl || !data->max_vl) { + ksft_test_result_skip("%s Failed to enumerate VLs, not testing VL setting\n", + data->name); + return; + } + + for (vq = SVE_VQ_MIN; vq <= SVE_VQ_MAX; vq++) { + vl = sve_vl_from_vq(vq); + + /* Attempt to set the VL */ + ret = prctl(data->prctl_set, vl); + if (ret < 0) { + errors++; + ksft_print_msg("%s prctl set failed for %d: %d (%s)\n", + data->name, vl, + errno, strerror(errno)); + continue; + } + + new_vl = ret & PR_SVE_VL_LEN_MASK; + + /* Check that we actually have the reported new VL */ + if (data->rdvl() != new_vl) { + ksft_print_msg("Set %s VL %d but RDVL reports %d\n", + data->name, new_vl, data->rdvl()); + errors++; + } + + /* Was that the VL we asked for? */ + if (new_vl == vl) + continue; + + /* Should round up to the minimum VL if below it */ + if (vl < data->min_vl) { + if (new_vl != data->min_vl) { + ksft_print_msg("%s VL %d returned %d not minimum %d\n", + data->name, vl, new_vl, + data->min_vl); + errors++; + } + + continue; + } + + /* Should round down to maximum VL if above it */ + if (vl > data->max_vl) { + if (new_vl != data->max_vl) { + ksft_print_msg("%s VL %d returned %d not maximum %d\n", + data->name, vl, new_vl, + data->max_vl); + errors++; + } + + continue; + } + + /* Otherwise we should've rounded down */ + if (!(new_vl < vl)) { + ksft_print_msg("%s VL %d returned %d, did not round down\n", + data->name, vl, new_vl); + errors++; + + continue; + } + } + + ksft_test_result(errors == 0, "%s prctl() set all VLs, %d errors\n", + data->name, errors); +} + typedef void (*test_type)(struct vec_data *); static const test_type tests[] = { @@ -561,10 +628,12 @@ static const test_type tests[] = { proc_write_max, prctl_get, + prctl_set_same, prctl_set, prctl_set_no_child, prctl_set_for_child, prctl_set_onexec, + prctl_set_all_vqs, }; int main(void) |