Merge tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU updates from Paul McKenney:

 - Documentation updates

 - Miscellaneous fixes, perhaps most notably:

      - Throttling callback invocation based on the number of callbacks
        that are now ready to invoke instead of on the total number of
        callbacks

      - Several patches that suppress false-positive boot-time
        diagnostics, for example, due to lockdep not yet being
        initialized

      - Make expedited RCU CPU stall warnings dump stacks of any tasks
        that are blocking the stalled grace period. (Normal RCU CPU
        stall warnings have done this for many years)

      - Lazy-callback fixes to avoid delays during boot, suspend, and
        resume. (Note that lazy callbacks must be explicitly enabled, so
        this should not (yet) affect production use cases)

 - Make kfree_rcu() and friends take advantage of polled grace periods,
   thus reducing memory footprint by almost two orders of magnitude,
   admittedly on a microbenchmark

   This also begins the transition from kfree_rcu(p) to
   kfree_rcu_mightsleep(p). This transition was motivated by bugs where
   kfree_rcu(p), which can block, was typed instead of the intended
   kfree_rcu(p, rh)

 - SRCU updates, perhaps most notably fixing a bug that causes SRCU to
   fail when booted on a system with a non-zero boot CPU. This
   surprising situation actually happens for kdump kernels on the
   powerpc architecture

   This also adds an srcu_down_read() and srcu_up_read(), which act like
   srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side
   critical section to be handed off from one task to another

 - Clean up the now-useless SRCU Kconfig option

   There are a few more commits that are not yet acked or pulled into
   maintainer trees, and these will be in a pull request for a later
   merge window

 - RCU-tasks updates, perhaps most notably these fixes:

      - A strange interaction between PID-namespace unshare and the
        RCU-tasks grace period that results in a low-probability but
        very real hang

      - A race between an RCU tasks rude grace period on a single-CPU
        system and CPU-hotplug addition of the second CPU that can
        result in a too-short grace period

      - A race between shrinking RCU tasks down to a single callback
        list and queuing a new callback to some other CPU, but where
        that queuing is delayed for more than an RCU grace period. This
        can result in that callback being stranded on the non-boot CPU

 - Torture-test updates and fixes

 - Torture-test scripting updates and fixes

 - Provide additional RCU CPU stall-warning information in kernels built
   with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute
   timeout limit for expedited RCU CPU stall warnings

* tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
  rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep()
  kernel/notifier: Remove CONFIG_SRCU
  init: Remove "select SRCU"
  fs/quota: Remove "select SRCU"
  fs/notify: Remove "select SRCU"
  fs/btrfs: Remove "select SRCU"
  fs: Remove CONFIG_SRCU
  drivers/pci/controller: Remove "select SRCU"
  drivers/net: Remove "select SRCU"
  drivers/md: Remove "select SRCU"
  drivers/hwtracing/stm: Remove "select SRCU"
  drivers/dax: Remove "select SRCU"
  drivers/base: Remove CONFIG_SRCU
  rcu: Disable laziness if lazy-tracking says so
  rcu: Track laziness during boot and suspend
  rcu: Remove redundant call to rcu_boost_kthread_setaffinity()
  rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts
  rcu: Align the output of RCU CPU stall warning messages
  rcu: Add RCU stall diagnosis information
  sched: Add helper nr_context_switches_cpu()
  ...

6 files changed, 16 insertions, 17 deletions

diff --git a/tools/testing/selftests/rcutorture/bin/configcheck.sh b/tools/testing/selftests/rcutorture/bin/configcheck.sh
index 83fac1852ab2..b92dfeb7fbbf 100755
--- a/tools/testing/selftests/rcutorture/bin/configcheck.sh
+++ b/tools/testing/selftests/rcutorture/bin/configcheck.sh
@@ -10,10 +10,9 @@
 T="`mktemp -d ${TMPDIR-/tmp}/configcheck.sh.XXXXXX`"
 trap 'rm -rf $T' 0
 
-cat $1 > $T/.config
+sed -e 's/"//g' < $1 > $T/.config
 
-cat $2 | sed -e 's/\(.*\)=n/# \1 is not set/' -e 's/^#CHECK#//' |
-grep -v '^CONFIG_INITRAMFS_SOURCE' |
+sed -e 's/"//g' -e 's/\(.*\)=n/# \1 is not set/' -e 's/^#CHECK#//' < $2 |
 awk	'
 {
 		print "if grep -q \"" $0 "\" < '"$T/.config"'";
diff --git a/tools/testing/selftests/rcutorture/bin/console-badness.sh b/tools/testing/selftests/rcutorture/bin/console-badness.sh
index 69f8a5958cef..aad51e7c0183 100755
--- a/tools/testing/selftests/rcutorture/bin/console-badness.sh
+++ b/tools/testing/selftests/rcutorture/bin/console-badness.sh
@@ -10,7 +10,7 @@
 #
 # Authors: Paul E. McKenney <paulmck@kernel.org>
 
-egrep 'Badness|WARNING:|Warn|BUG|===========|BUG: KCSAN:|Call Trace:|Oops:|detected stalls on CPUs/tasks:|self-detected stall on CPU|Stall ended before state dump start|\?\?\? Writer stall state|rcu_.*kthread starved for|!!!' |
+grep -E 'Badness|WARNING:|Warn|BUG|===========|BUG: KCSAN:|Call Trace:|Oops:|detected stalls on CPUs/tasks:|self-detected stall on CPU|Stall ended before state dump start|\?\?\? Writer stall state|rcu_.*kthread starved for|!!!' |
 grep -v 'ODEBUG: ' |
 grep -v 'This means that this is a DEBUG kernel and it is' |
 grep -v 'Warning: unable to open an initial console' |
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-build.sh b/tools/testing/selftests/rcutorture/bin/kvm-build.sh
index e28a82851f7c..11f8d232b0ee 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-build.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-build.sh
@@ -44,10 +44,10 @@ fi
 ncpus="`getconf _NPROCESSORS_ONLN`"
 make -j$((2 * ncpus)) $TORTURE_KMAKE_ARG > $resdir/Make.out 2>&1
 retval=$?
-if test $retval -ne 0 || grep "rcu[^/]*": < $resdir/Make.out | egrep -q "Stop|Error|error:|warning:" || egrep -q "Stop|Error|error:" < $resdir/Make.out
+if test $retval -ne 0 || grep "rcu[^/]*": < $resdir/Make.out | grep -E -q "Stop|Error|error:|warning:" || grep -E -q "Stop|Error|error:" < $resdir/Make.out
 then
 	echo Kernel build error
-	egrep "Stop|Error|error:|warning:" < $resdir/Make.out
+	grep -E "Stop|Error|error:|warning:" < $resdir/Make.out
 	echo Run aborted.
 	exit 3
 fi
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh b/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh
index 88983cba7956..28981007465b 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh
@@ -32,11 +32,11 @@ for i in ${rundir}/*/Make.out
 do
 	scenariodir="`dirname $i`"
 	scenariobasedir="`echo ${scenariodir} | sed -e 's/\.[0-9]*$//'`"
-	if egrep -q "error:|warning:|^ld: .*undefined reference to" < $i
+	if grep -E -q "error:|warning:|^ld: .*undefined reference to" < $i
 	then
-		egrep "error:|warning:|^ld: .*undefined reference to" < $i > $i.diags
+		grep -E "error:|warning:|^ld: .*undefined reference to" < $i > $i.diags
 		files="$files $i.diags $i"
-	elif ! test -f ${scenariobasedir}/vmlinux && ! test -f "${rundir}/re-run"
+	elif ! test -f ${scenariobasedir}/vmlinux && ! test -f ${scenariobasedir}/vmlinux.xz && ! test -f "${rundir}/re-run"
 	then
 		echo No ${scenariobasedir}/vmlinux file > $i.diags
 		files="$files $i.diags $i"
diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh
index 7710b1e1cdda..62f3b0f56e4d 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm.sh
@@ -186,7 +186,7 @@ do
 		fi
 		;;
 	--kconfig|--kconfigs)
-		checkarg --kconfig "(Kconfig options)" $# "$2" '^CONFIG_[A-Z0-9_]\+=\([ynm]\|[0-9]\+\)\( CONFIG_[A-Z0-9_]\+=\([ynm]\|[0-9]\+\)\)*$' '^error$'
+		checkarg --kconfig "(Kconfig options)" $# "$2" '^CONFIG_[A-Z0-9_]\+=\([ynm]\|[0-9]\+\|"[^"]*"\)\( CONFIG_[A-Z0-9_]\+=\([ynm]\|[0-9]\+\|"[^"]*"\)\)*$' '^error$'
 		TORTURE_KCONFIG_ARG="`echo "$TORTURE_KCONFIG_ARG $2" | sed -e 's/^ *//' -e 's/ *$//'`"
 		shift
 		;;
@@ -585,7 +585,7 @@ awk < $T/cfgcpu.pack \
 echo kvm-end-run-stats.sh "$resdir/$ds" "$starttime" >> $T/script
 
 # Extract the tests and their batches from the script.
-egrep 'Start batch|Starting build\.' $T/script | grep -v ">>" |
+grep -E 'Start batch|Starting build\.' $T/script | grep -v ">>" |
 	sed -e 's/:.*$//' -e 's/^echo //' -e 's/-ovf//' |
 	awk '
 	/^----Start/ {
@@ -622,7 +622,7 @@ then
 elif test "$dryrun" = sched
 then
 	# Extract the test run schedule from the script.
-	egrep 'Start batch|Starting build\.' $T/script | grep -v ">>" |
+	grep -E 'Start batch|Starting build\.' $T/script | grep -v ">>" |
 		sed -e 's/:.*$//' -e 's/^echo //'
 	nbuilds="`grep 'Starting build\.' $T/script |
 		  grep -v ">>" | sed -e 's/:.*$//' -e 's/^echo //' |
diff --git a/tools/testing/selftests/rcutorture/bin/parse-console.sh b/tools/testing/selftests/rcutorture/bin/parse-console.sh
index 822eb037a057..9ab0f6bc172c 100755
--- a/tools/testing/selftests/rcutorture/bin/parse-console.sh
+++ b/tools/testing/selftests/rcutorture/bin/parse-console.sh
@@ -65,7 +65,7 @@ then
 	fi
 
 	grep --binary-files=text 'torture:.*ver:' $file |
-	egrep --binary-files=text -v '\(null\)|rtc: 000000000* ' |
+	grep -E --binary-files=text -v '\(null\)|rtc: 000000000* ' |
 	sed -e 's/^(initramfs)[^]]*] //' -e 's/^\[[^]]*] //' |
 	sed -e 's/^.*ver: //' |
 	awk '
@@ -128,17 +128,17 @@ then
 	then
 		summary="$summary  Badness: $n_badness"
 	fi
-	n_warn=`grep -v 'Warning: unable to open an initial console' $file | grep -v 'Warning: Failed to add ttynull console. No stdin, stdout, and stderr for the init process' | egrep -c 'WARNING:|Warn'`
+	n_warn=`grep -v 'Warning: unable to open an initial console' $file | grep -v 'Warning: Failed to add ttynull console. No stdin, stdout, and stderr for the init process' | grep -E -c 'WARNING:|Warn'`
 	if test "$n_warn" -ne 0
 	then
 		summary="$summary  Warnings: $n_warn"
 	fi
-	n_bugs=`egrep -c '\bBUG|Oops:' $file`
+	n_bugs=`grep -E -c '\bBUG|Oops:' $file`
 	if test "$n_bugs" -ne 0
 	then
 		summary="$summary  Bugs: $n_bugs"
 	fi
-	n_kcsan=`egrep -c 'BUG: KCSAN: ' $file`
+	n_kcsan=`grep -E -c 'BUG: KCSAN: ' $file`
 	if test "$n_kcsan" -ne 0
 	then
 		if test "$n_bugs" = "$n_kcsan"
@@ -158,7 +158,7 @@ then
 	then
 		summary="$summary  lockdep: $n_badness"
 	fi
-	n_stalls=`egrep -c 'detected stalls on CPUs/tasks:|self-detected stall on CPU|Stall ended before state dump start|\?\?\? Writer stall state' $file`
+	n_stalls=`grep -E -c 'detected stalls on CPUs/tasks:|self-detected stall on CPU|Stall ended before state dump start|\?\?\? Writer stall state' $file`
 	if test "$n_stalls" -ne 0
 	then
 		summary="$summary  Stalls: $n_stalls"