Merge tag 'net-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless, and netfilter.

  Selftests excluded - we have 58 patches and diff of +442/-199, which
  isn't really small but perhaps with the exception of the WiFi locking
  change it's old(ish) bugs.

  We have no known problems with v6.4.

  The selftest changes are rather large as MPTCP folks try to apply
  Greg's guidance that selftest from torvalds/linux should be able to
  run against stable kernels.

  Last thing I should call out is the DCCP/UDP-lite deprecation notices.
  We are fairly sure those are dead, but if we're wrong reverting them
  back in won't be fun.

  Current release - regressions:

   - wifi:
      - cfg80211: fix double lock bug in reg_wdev_chan_valid()
      - iwlwifi: mvm: spin_lock_bh() to fix lockdep regression

  Current release - new code bugs:

   - handshake: remove fput() that causes use-after-free

  Previous releases - regressions:

   - sched: cls_u32: fix reference counter leak leading to overflow

   - sched: cls_api: fix lockup on flushing explicitly created chain

  Previous releases - always broken:

   - nf_tables: integrate pipapo into commit protocol

   - nf_tables: incorrect error path handling with NFT_MSG_NEWRULE, fix
     dangling pointer on failure

   - ping6: fix send to link-local addresses with VRF

   - sched: act_pedit: parse L3 header for L4 offset, the skb may not
     have the offset saved

   - sched: act_ct: fix promotion of offloaded unreplied tuple

   - sched: refuse to destroy an ingress and clsact Qdiscs if there are
     lockless change operations in flight

   - wifi: mac80211: fix handful of bugs in multi-link operation

   - ipvlan: fix bound dev checking for IPv6 l3s mode

   - eth: enetc: correct the indexes of highest and 2nd highest TCs

   - eth: ice: fix XDP memory leak when NIC is brought up and down

  Misc:

   - add deprecation notices for UDP-lite and DCCP

   - selftests: mptcp: skip tests not supported by old kernels

   - sctp: handle invalid error codes without calling BUG()"

* tag 'net-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  dccp: Print deprecation notice.
  udplite: Print deprecation notice.
  octeon_ep: Add missing check for ioremap
  selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET
  net: ethernet: stmicro: stmmac: fix possible memory leak in __stmmac_open
  net: tipc: resize nlattr array to correct size
  sfc: fix XDP queues mode with legacy IRQ
  net: macsec: fix double free of percpu stats
  net: lapbether: only support ethernet devices
  MAINTAINERS: add reviewers for SMC Sockets
  s390/ism: Fix trying to free already-freed IRQ by repeated ism_dev_exit()
  net: dsa: felix: fix taprio guard band overflow at 10Mbps with jumbo frames
  net/sched: cls_api: Fix lockup on flushing explicitly created chain
  ice: Fix ice module unload
  net/handshake: remove fput() that causes use-after-free
  selftests: forwarding: hw_stats_l3: Set addrgenmode in a separate step
  net/sched: qdisc_destroy() old ingress and clsact Qdiscs before grafting
  net/sched: Refactor qdisc_graft() for ingress and clsact Qdiscs
  net/sched: act_ct: Fix promotion of offloaded unreplied tuple
  wifi: iwlwifi: mvm: spin_lock_bh() to fix lockdep regression
  ...

14 files changed, 503 insertions, 243 deletions

diff --git a/tools/testing/selftests/net/forwarding/hw_stats_l3.sh b/tools/testing/selftests/net/forwarding/hw_stats_l3.sh
index 432fe8469851..48584a51388f 100755
--- a/tools/testing/selftests/net/forwarding/hw_stats_l3.sh
+++ b/tools/testing/selftests/net/forwarding/hw_stats_l3.sh
@@ -84,8 +84,9 @@ h2_destroy()
 
 router_rp1_200_create()
 {
-	ip link add name $rp1.200 up \
-		link $rp1 addrgenmode eui64 type vlan id 200
+	ip link add name $rp1.200 link $rp1 type vlan id 200
+	ip link set dev $rp1.200 addrgenmode eui64
+	ip link set dev $rp1.200 up
 	ip address add dev $rp1.200 192.0.2.2/28
 	ip address add dev $rp1.200 2001:db8:1::2/64
 	ip stats set dev $rp1.200 l3_stats on
@@ -256,9 +257,11 @@ reapply_config()
 
 	router_rp1_200_destroy
 
-	ip link add name $rp1.200 link $rp1 addrgenmode none type vlan id 200
+	ip link add name $rp1.200 link $rp1 type vlan id 200
+	ip link set dev $rp1.200 addrgenmode none
 	ip stats set dev $rp1.200 l3_stats on
-	ip link set dev $rp1.200 up addrgenmode eui64
+	ip link set dev $rp1.200 addrgenmode eui64
+	ip link set dev $rp1.200 up
 	ip address add dev $rp1.200 192.0.2.2/28
 	ip address add dev $rp1.200 2001:db8:1::2/64
 }
diff --git a/tools/testing/selftests/net/mptcp/config b/tools/testing/selftests/net/mptcp/config
index 38021a0dd527..6032f9b23c4c 100644
--- a/tools/testing/selftests/net/mptcp/config
+++ b/tools/testing/selftests/net/mptcp/config
@@ -1,3 +1,4 @@
+CONFIG_KALLSYMS=y
 CONFIG_MPTCP=y
 CONFIG_IPV6=y
 CONFIG_MPTCP_IPV6=y
diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh
index 4eacdb1ab962..fa9e09ad97d9 100755
--- a/tools/testing/selftests/net/mptcp/diag.sh
+++ b/tools/testing/selftests/net/mptcp/diag.sh
@@ -55,16 +55,20 @@ __chk_nr()
 {
 	local command="$1"
 	local expected=$2
-	local msg nr
+	local msg="$3"
+	local skip="${4:-SKIP}"
+	local nr
 
-	shift 2
-	msg=$*
 	nr=$(eval $command)
 
 	printf "%-50s" "$msg"
 	if [ $nr != $expected ]; then
-		echo "[ fail ] expected $expected found $nr"
-		ret=$test_cnt
+		if [ $nr = "$skip" ] && ! mptcp_lib_expect_all_features; then
+			echo "[ skip ] Feature probably not supported"
+		else
+			echo "[ fail ] expected $expected found $nr"
+			ret=$test_cnt
+		fi
 	else
 		echo "[  ok  ]"
 	fi
@@ -76,12 +80,12 @@ __chk_msk_nr()
 	local condition=$1
 	shift 1
 
-	__chk_nr "ss -inmHMN $ns | $condition" $*
+	__chk_nr "ss -inmHMN $ns | $condition" "$@"
 }
 
 chk_msk_nr()
 {
-	__chk_msk_nr "grep -c token:" $*
+	__chk_msk_nr "grep -c token:" "$@"
 }
 
 wait_msk_nr()
@@ -119,37 +123,26 @@ wait_msk_nr()
 
 chk_msk_fallback_nr()
 {
-		__chk_msk_nr "grep -c fallback" $*
+	__chk_msk_nr "grep -c fallback" "$@"
 }
 
 chk_msk_remote_key_nr()
 {
-		__chk_msk_nr "grep -c remote_key" $*
+	__chk_msk_nr "grep -c remote_key" "$@"
 }
 
 __chk_listen()
 {
 	local filter="$1"
 	local expected=$2
+	local msg="$3"
 
-	shift 2
-	msg=$*
-
-	nr=$(ss -N $ns -Ml "$filter" | grep -c LISTEN)
-	printf "%-50s" "$msg"
-
-	if [ $nr != $expected ]; then
-		echo "[ fail ] expected $expected found $nr"
-		ret=$test_cnt
-	else
-		echo "[  ok  ]"
-	fi
+	__chk_nr "ss -N $ns -Ml '$filter' | grep -c LISTEN" "$expected" "$msg" 0
 }
 
 chk_msk_listen()
 {
 	lport=$1
-	local msg="check for listen socket"
 
 	# destination port search should always return empty list
 	__chk_listen "dport $lport" 0 "listen match for dport $lport"
@@ -167,10 +160,9 @@ chk_msk_listen()
 chk_msk_inuse()
 {
 	local expected=$1
+	local msg="$2"
 	local listen_nr
 
-	shift 1
-
 	listen_nr=$(ss -N "${ns}" -Ml | grep -c LISTEN)
 	expected=$((expected + listen_nr))
 
@@ -181,7 +173,7 @@ chk_msk_inuse()
 		sleep 0.1
 	done
 
-	__chk_nr get_msk_inuse $expected $*
+	__chk_nr get_msk_inuse $expected "$msg" 0
 }
 
 # $1: ns, $2: port
diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
index c1f7bac19942..773dd770a567 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
@@ -144,6 +144,7 @@ cleanup()
 }
 
 mptcp_lib_check_mptcp
+mptcp_lib_check_kallsyms
 
 ip -Version > /dev/null 2>&1
 if [ $? -ne 0 ];then
@@ -695,6 +696,15 @@ run_test_transparent()
 		return 0
 	fi
 
+	# IP(V6)_TRANSPARENT has been added after TOS support which came with
+	# the required infrastructure in MPTCP sockopt code. To support TOS, the
+	# following function has been exported (T). Not great but better than
+	# checking for a specific kernel version.
+	if ! mptcp_lib_kallsyms_has "T __ip_sock_set_tos$"; then
+		echo "INFO: ${msg} not supported by the kernel: SKIP"
+		return
+	fi
+
 ip netns exec "$listener_ns" nft -f /dev/stdin <<"EOF"
 flush ruleset
 table inet mangle {
@@ -767,6 +777,11 @@ run_tests_peekmode()
 
 run_tests_mptfo()
 {
+	if ! mptcp_lib_kallsyms_has "mptcp_fastopen_"; then
+		echo "INFO: TFO not supported by the kernel: SKIP"
+		return
+	fi
+
 	echo "INFO: with MPTFO start"
 	ip netns exec "$ns1" sysctl -q net.ipv4.tcp_fastopen=2
 	ip netns exec "$ns2" sysctl -q net.ipv4.tcp_fastopen=1
@@ -787,6 +802,11 @@ run_tests_disconnect()
 	local old_cin=$cin
 	local old_sin=$sin
 
+	if ! mptcp_lib_kallsyms_has "mptcp_pm_data_reset$"; then
+		echo "INFO: Full disconnect not supported: SKIP"
+		return
+	fi
+
 	cat $cin $cin $cin > "$cin".disconnect
 
 	# force do_transfer to cope with the multiple tranmissions
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 29f0c99d9a46..0ae8cafde439 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -25,6 +25,8 @@ capout=""
 ns1=""
 ns2=""
 ksft_skip=4
+iptables="iptables"
+ip6tables="ip6tables"
 timeout_poll=30
 timeout_test=$((timeout_poll * 2 + 1))
 capture=0
@@ -82,7 +84,7 @@ init_partial()
 		ip netns add $netns || exit $ksft_skip
 		ip -net $netns link set lo up
 		ip netns exec $netns sysctl -q net.mptcp.enabled=1
-		ip netns exec $netns sysctl -q net.mptcp.pm_type=0
+		ip netns exec $netns sysctl -q net.mptcp.pm_type=0 2>/dev/null || true
 		ip netns exec $netns sysctl -q net.ipv4.conf.all.rp_filter=0
 		ip netns exec $netns sysctl -q net.ipv4.conf.default.rp_filter=0
 		if [ $checksum -eq 1 ]; then
@@ -140,13 +142,18 @@ cleanup_partial()
 check_tools()
 {
 	mptcp_lib_check_mptcp
+	mptcp_lib_check_kallsyms
 
 	if ! ip -Version &> /dev/null; then
 		echo "SKIP: Could not run test without ip tool"
 		exit $ksft_skip
 	fi
 
-	if ! iptables -V &> /dev/null; then
+	# Use the legacy version if available to support old kernel versions
+	if iptables-legacy -V &> /dev/null; then
+		iptables="iptables-legacy"
+		ip6tables="ip6tables-legacy"
+	elif ! iptables -V &> /dev/null; then
 		echo "SKIP: Could not run all tests without iptables tool"
 		exit $ksft_skip
 	fi
@@ -185,6 +192,32 @@ cleanup()
 	cleanup_partial
 }
 
+# $1: msg
+print_title()
+{
+	printf "%03u %-36s %s" "${TEST_COUNT}" "${TEST_NAME}" "${1}"
+}
+
+# [ $1: fail msg ]
+mark_as_skipped()
+{
+	local msg="${1:-"Feature not supported"}"
+
+	mptcp_lib_fail_if_expected_feature "${msg}"
+
+	print_title "[ skip ] ${msg}"
+	printf "\n"
+}
+
+# $@: condition
+continue_if()
+{
+	if ! "${@}"; then
+		mark_as_skipped
+		return 1
+	fi
+}
+
 skip_test()
 {
 	if [ "${#only_tests_ids[@]}" -eq 0 ] && [ "${#only_tests_names[@]}" -eq 0 ]; then
@@ -228,6 +261,19 @@ reset()
 	return 0
 }
 
+# $1: test name ; $2: counter to check
+reset_check_counter()
+{
+	reset "${1}" || return 1
+
+	local counter="${2}"
+
+	if ! nstat -asz "${counter}" | grep -wq "${counter}"; then
+		mark_as_skipped "counter '${counter}' is not available"
+		return 1
+	fi
+}
+
 # $1: test name
 reset_with_cookies()
 {
@@ -247,17 +293,21 @@ reset_with_add_addr_timeout()
 
 	reset "${1}" || return 1
 
-	tables="iptables"
+	tables="${iptables}"
 	if [ $ip -eq 6 ]; then
-		tables="ip6tables"
+		tables="${ip6tables}"
 	fi
 
 	ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
-	ip netns exec $ns2 $tables -A OUTPUT -p tcp \
-		-m tcp --tcp-option 30 \
-		-m bpf --bytecode \
-		"$CBPF_MPTCP_SUBOPTION_ADD_ADDR" \
-		-j DROP
+
+	if ! ip netns exec $ns2 $tables -A OUTPUT -p tcp \
+			-m tcp --tcp-option 30 \
+			-m bpf --bytecode \
+			"$CBPF_MPTCP_SUBOPTION_ADD_ADDR" \
+			-j DROP; then
+		mark_as_skipped "unable to set the 'add addr' rule"
+		return 1
+	fi
 }
 
 # $1: test name
@@ -301,22 +351,17 @@ reset_with_allow_join_id0()
 #     tc action pedit offset 162 out of bounds
 #
 # Netfilter is used to mark packets with enough data.
-reset_with_fail()
+setup_fail_rules()
 {
-	reset "${1}" || return 1
-
-	ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=1
-	ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=1
-
 	check_invert=1
 	validate_checksum=1
-	local i="$2"
-	local ip="${3:-4}"
+	local i="$1"
+	local ip="${2:-4}"
 	local tables
 
-	tables="iptables"
+	tables="${iptables}"
 	if [ $ip -eq 6 ]; then
-		tables="ip6tables"
+		tables="${ip6tables}"
 	fi
 
 	ip netns exec $ns2 $tables \
@@ -326,15 +371,32 @@ reset_with_fail()
 		-p tcp \
 		-m length --length 150:9999 \
 		-m statistic --mode nth --packet 1 --every 99999 \
-		-j MARK --set-mark 42 || exit 1
+		-j MARK --set-mark 42 || return ${ksft_skip}
 
-	tc -n $ns2 qdisc add dev ns2eth$i clsact || exit 1
+	tc -n $ns2 qdisc add dev ns2eth$i clsact || return ${ksft_skip}
 	tc -n $ns2 filter add dev ns2eth$i egress \
 		protocol ip prio 1000 \
 		handle 42 fw \
 		action pedit munge offset 148 u8 invert \
 		pipe csum tcp \
-		index 100 || exit 1
+		index 100 || return ${ksft_skip}
+}
+
+reset_with_fail()
+{
+	reset_check_counter "${1}" "MPTcpExtInfiniteMapTx" || return 1
+	shift
+
+	ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=1
+	ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=1
+
+	local rc=0
+	setup_fail_rules "${@}" || rc=$?
+
+	if [ ${rc} -eq ${ksft_skip} ]; then
+		mark_as_skipped "unable to set the 'fail' rules"
+		return 1
+	fi
 }
 
 reset_with_events()
@@ -349,6 +411,25 @@ reset_with_events()
 	evts_ns2_pid=$!
 }
 
+reset_with_tcp_filter()
+{
+	reset "${1}" || return 1
+	shift
+
+	local ns="${!1}"
+	local src="${2}"
+	local target="${3}"
+
+	if ! ip netns exec "${ns}" ${iptables} \
+			-A INPUT \
+			-s "${src}" \
+			-p tcp \
+			-j "${target}"; then
+		mark_as_skipped "unable to set the filter rules"
+		return 1
+	fi
+}
+
 fail_test()
 {
 	ret=1
@@ -467,11 +548,25 @@ wait_local_port_listen()
 	done
 }
 
-rm_addr_count()
+# $1: ns ; $2: counter
+get_counter()
 {
-	local ns=${1}
+	local ns="${1}"
+	local counter="${2}"
+	local count
 
-	ip netns exec ${ns} nstat -as | grep MPTcpExtRmAddr | awk '{print $2}'
+	count=$(ip netns exec ${ns} nstat -asz "${counter}" | awk 'NR==1 {next} {print $2}')
+	if [ -z "${count}" ]; then
+		mptcp_lib_fail_if_expected_feature "${counter} counter"
+		return 1
+	fi
+
+	echo "${count}"
+}
+
+rm_addr_count()
+{
+	get_counter "${1}" "MPTcpExtRmAddr"
 }
 
 # $1: ns, $2: old rm_addr counter in $ns
@@ -494,11 +589,11 @@ wait_mpj()
 	local ns="${1}"
 	local cnt old_cnt
 
-	old_cnt=$(ip netns exec ${ns} nstat -as | grep MPJoinAckRx | awk '{print $2}')
+	old_cnt=$(get_counter ${ns} "MPTcpExtMPJoinAckRx")
 
 	local i
 	for i in $(seq 10); do
-		cnt=$(ip netns exec ${ns} nstat -as | grep MPJoinAckRx | awk '{print $2}')
+		cnt=$(get_counter ${ns} "MPTcpExtMPJoinAckRx")
 		[ "$cnt" = "${old_cnt}" ] || break
 		sleep 0.1
 	done
@@ -698,15 +793,6 @@ pm_nl_check_endpoint()
 	fi
 }
 
-filter_tcp_from()
-{
-	local ns="${1}"
-	local src="${2}"
-	local target="${3}"
-
-	ip netns exec "${ns}" iptables -A INPUT -s "${src}" -p tcp -j "${target}"
-}
-
 do_transfer()
 {
 	local listener_ns="$1"
@@ -1157,12 +1243,13 @@ chk_csum_nr()
 	fi
 
 	printf "%-${nr_blank}s %s" " " "sum"
-	count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtDataCsumErr | awk '{print $2}')
-	[ -z "$count" ] && count=0
+	count=$(get_counter ${ns1} "MPTcpExtDataCsumErr")
 	if [ "$count" != "$csum_ns1" ]; then
 		extra_msg="$extra_msg ns1=$count"
 	fi
-	if { [ "$count" != $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 0 ]; } ||
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif { [ "$count" != $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 0 ]; } ||
 	   { [ "$count" -lt $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 1 ]; }; then
 		echo "[fail] got $count data checksum error[s] expected $csum_ns1"
 		fail_test
@@ -1171,12 +1258,13 @@ chk_csum_nr()
 		echo -n "[ ok ]"
 	fi
 	echo -n " - csum  "
-	count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtDataCsumErr | awk '{print $2}')
-	[ -z "$count" ] && count=0
+	count=$(get_counter ${ns2} "MPTcpExtDataCsumErr")
 	if [ "$count" != "$csum_ns2" ]; then
 		extra_msg="$extra_msg ns2=$count"
 	fi
-	if { [ "$count" != $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 0 ]; } ||
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif { [ "$count" != $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 0 ]; } ||
 	   { [ "$count" -lt $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 1 ]; }; then
 		echo "[fail] got $count data checksum error[s] expected $csum_ns2"
 		fail_test
@@ -1218,12 +1306,13 @@ chk_fail_nr()
 	fi
 
 	printf "%-${nr_blank}s %s" " " "ftx"
-	count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPFailTx | awk '{print $2}')
-	[ -z "$count" ] && count=0
+	count=$(get_counter ${ns_tx} "MPTcpExtMPFailTx")
 	if [ "$count" != "$fail_tx" ]; then
 		extra_msg="$extra_msg,tx=$count"
 	fi
-	if { [ "$count" != "$fail_tx" ] && [ $allow_tx_lost -eq 0 ]; } ||
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif { [ "$count" != "$fail_tx" ] && [ $allow_tx_lost -eq 0 ]; } ||
 	   { [ "$count" -gt "$fail_tx" ] && [ $allow_tx_lost -eq 1 ]; }; then
 		echo "[fail] got $count MP_FAIL[s] TX expected $fail_tx"
 		fail_test
@@ -1233,12 +1322,13 @@ chk_fail_nr()
 	fi
 
 	echo -n " - failrx"
-	count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPFailRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
+	count=$(get_counter ${ns_rx} "MPTcpExtMPFailRx")
 	if [ "$count" != "$fail_rx" ]; then
 		extra_msg="$extra_msg,rx=$count"
 	fi
-	if { [ "$count" != "$fail_rx" ] && [ $allow_rx_lost -eq 0 ]; } ||
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif { [ "$count" != "$fail_rx" ] && [ $allow_rx_lost -eq 0 ]; } ||
 	   { [ "$count" -gt "$fail_rx" ] && [ $allow_rx_lost -eq 1 ]; }; then
 		echo "[fail] got $count MP_FAIL[s] RX expected $fail_rx"
 		fail_test
@@ -1270,10 +1360,11 @@ chk_fclose_nr()
 	fi
 
 	printf "%-${nr_blank}s %s" " " "ctx"
-	count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPFastcloseTx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	[ "$count" != "$fclose_tx" ] && extra_msg="$extra_msg,tx=$count"
-	if [ "$count" != "$fclose_tx" ]; then
+	count=$(get_counter ${ns_tx} "MPTcpExtMPFastcloseTx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$fclose_tx" ]; then
+		extra_msg="$extra_msg,tx=$count"
 		echo "[fail] got $count MP_FASTCLOSE[s] TX expected $fclose_tx"
 		fail_test
 		dump_stats=1
@@ -1282,10 +1373,11 @@ chk_fclose_nr()
 	fi
 
 	echo -n " - fclzrx"
-	count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPFastcloseRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	[ "$count" != "$fclose_rx" ] && extra_msg="$extra_msg,rx=$count"
-	if [ "$count" != "$fclose_rx" ]; then
+	count=$(get_counter ${ns_rx} "MPTcpExtMPFastcloseRx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$fclose_rx" ]; then
+		extra_msg="$extra_msg,rx=$count"
 		echo "[fail] got $count MP_FASTCLOSE[s] RX expected $fclose_rx"
 		fail_test
 		dump_stats=1
@@ -1316,9 +1408,10 @@ chk_rst_nr()
 	fi
 
 	printf "%-${nr_blank}s %s" " " "rtx"
-	count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPRstTx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ $count -lt $rst_tx ]; then
+	count=$(get_counter ${ns_tx} "MPTcpExtMPRstTx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ $count -lt $rst_tx ]; then
 		echo "[fail] got $count MP_RST[s] TX expected $rst_tx"
 		fail_test
 		dump_stats=1
@@ -1327,9 +1420,10 @@ chk_rst_nr()
 	fi
 
 	echo -n " - rstrx "
-	count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPRstRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" -lt "$rst_rx" ]; then
+	count=$(get_counter ${ns_rx} "MPTcpExtMPRstRx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" -lt "$rst_rx" ]; then
 		echo "[fail] got $count MP_RST[s] RX expected $rst_rx"
 		fail_test
 		dump_stats=1
@@ -1350,9 +1444,10 @@ chk_infi_nr()
 	local dump_stats
 
 	printf "%-${nr_blank}s %s" " " "itx"
-	count=$(ip netns exec $ns2 nstat -as | grep InfiniteMapTx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$infi_tx" ]; then
+	count=$(get_counter ${ns2} "MPTcpExtInfiniteMapTx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$infi_tx" ]; then
 		echo "[fail] got $count infinite map[s] TX expected $infi_tx"
 		fail_test
 		dump_stats=1
@@ -1361,9 +1456,10 @@ chk_infi_nr()
 	fi
 
 	echo -n " - infirx"
-	count=$(ip netns exec $ns1 nstat -as | grep InfiniteMapRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$infi_rx" ]; then
+	count=$(get_counter ${ns1} "MPTcpExtInfiniteMapRx")
+	if [ -z "$count" ]; then
+		echo "[skip]"
+	elif [ "$count" != "$infi_rx" ]; then
 		echo "[fail] got $count infinite map[s] RX expected $infi_rx"
 		fail_test
 		dump_stats=1
@@ -1395,9 +1491,10 @@ chk_join_nr()
 	fi
 
 	printf "%03u %-36s %s" "${TEST_COUNT}" "${title}" "syn"
-	count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinSynRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$syn_nr" ]; then
+	count=$(get_counter ${ns1} "MPTcpExtMPJoinSynRx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$syn_nr" ]; then
 		echo "[fail] got $count JOIN[s] syn expected $syn_nr"
 		fail_test
 		dump_stats=1
@@ -1407,9 +1504,10 @@ chk_join_nr()
 
 	echo -n " - synack"
 	with_cookie=$(ip netns exec $ns2 sysctl -n net.ipv4.tcp_syncookies)
-	count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinSynAckRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$syn_ack_nr" ]; then
+	count=$(get_counter ${ns2} "MPTcpExtMPJoinSynAckRx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$syn_ack_nr" ]; then
 		# simult connections exceeding the limit with cookie enabled could go up to
 		# synack validation as the conn limit can be enforced reliably only after
 		# the subflow creation
@@ -1425,9 +1523,10 @@ chk_join_nr()
 	fi
 
 	echo -n " - ack"
-	count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinAckRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$ack_nr" ]; then
+	count=$(get_counter ${ns1} "MPTcpExtMPJoinAckRx")
+	if [ -z "$count" ]; then
+		echo "[skip]"
+	elif [ "$count" != "$ack_nr" ]; then
 		echo "[fail] got $count JOIN[s] ack expected $ack_nr"
 		fail_test
 		dump_stats=1
@@ -1459,12 +1558,12 @@ chk_stale_nr()
 	local recover_nr
 
 	printf "%-${nr_blank}s %-18s" " " "stale"
-	stale_nr=$(ip netns exec $ns nstat -as | grep MPTcpExtSubflowStale | awk '{print $2}')
-	[ -z "$stale_nr" ] && stale_nr=0
-	recover_nr=$(ip netns exec $ns nstat -as | grep MPTcpExtSubflowRecover | awk '{print $2}')
-	[ -z "$recover_nr" ] && recover_nr=0
 
-	if [ $stale_nr -lt $stale_min ] ||
+	stale_nr=$(get_counter ${ns} "MPTcpExtSubflowStale")
+	recover_nr=$(get_counter ${ns} "MPTcpExtSubflowRecover")
+	if [ -z "$stale_nr" ] || [ -z "$recover_nr" ]; then
+		echo "[skip]"
+	elif [ $stale_nr -lt $stale_min ] ||
 	   { [ $stale_max -gt 0 ] && [ $stale_nr -gt $stale_max ]; } ||
 	   [ $((stale_nr - recover_nr)) -ne $stale_delta ]; then
 		echo "[fail] got $stale_nr stale[s] $recover_nr recover[s], " \
@@ -1500,12 +1599,12 @@ chk_add_nr()
 	timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout)
 
 	printf "%-${nr_blank}s %s" " " "add"
-	count=$(ip netns exec $ns2 nstat -as MPTcpExtAddAddr | grep MPTcpExtAddAddr | awk '{print $2}')
-	[ -z "$count" ] && count=0
-
+	count=$(get_counter ${ns2} "MPTcpExtAddAddr")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
 	# if the test configured a short timeout tolerate greater then expected
 	# add addrs options, due to retransmissions
-	if [ "$count" != "$add_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_nr" ]; }; then
+	elif [ "$count" != "$add_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_nr" ]; }; then
 		echo "[fail] got $count ADD_ADDR[s] expected $add_nr"
 		fail_test
 		dump_stats=1
@@ -1514,9 +1613,10 @@ chk_add_nr()
 	fi
 
 	echo -n " - echo  "
-	count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtEchoAdd | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$echo_nr" ]; then
+	count=$(get_counter ${ns1} "MPTcpExtEchoAdd")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$echo_nr" ]; then
 		echo "[fail] got $count ADD_ADDR echo[s] expected $echo_nr"
 		fail_test
 		dump_stats=1
@@ -1526,9 +1626,10 @@ chk_add_nr()
 
 	if [ $port_nr -gt 0 ]; then
 		echo -n " - pt "
-		count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtPortAdd | awk '{print $2}')
-		[ -z "$count" ] && count=0
-		if [ "$count" != "$port_nr" ]; then
+		count=$(get_counter ${ns2} "MPTcpExtPortAdd")
+		if [ -z "$count" ]; then
+			echo "[skip]"
+		elif [ "$count" != "$port_nr" ]; then
 			echo "[fail] got $count ADD_ADDR[s] with a port-number expected $port_nr"
 			fail_test
 			dump_stats=1
@@ -1537,10 +1638,10 @@ chk_add_nr()
 		fi
 
 		printf "%-${nr_blank}s %s" " " "syn"
-		count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinPortSynRx |
-			awk '{print $2}')
-		[ -z "$count" ] && count=0
-		if [ "$count" != "$syn_nr" ]; then
+		count=$(get_counter ${ns1} "MPTcpExtMPJoinPortSynRx")
+		if [ -z "$count" ]; then
+			echo -n "[skip]"
+		elif [ "$count" != "$syn_nr" ]; then
 			echo "[fail] got $count JOIN[s] syn with a different \
 				port-number expected $syn_nr"
 			fail_test
@@ -1550,10 +1651,10 @@ chk_add_nr()
 		fi
 
 		echo -n " - synack"
-		count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinPortSynAckRx |
-			awk '{print $2}')
-		[ -z "$count" ] && count=0
-		if [ "$count" != "$syn_ack_nr" ]; then
+		count=$(get_counter ${ns2} "MPTcpExtMPJoinPortSynAckRx")
+		if [ -z "$count" ]; then
+			echo -n "[skip]"
+		elif [ "$count" != "$syn_ack_nr" ]; then
 			echo "[fail] got $count JOIN[s] synack with a different \
 				port-number expected $syn_ack_nr"
 			fail_test
@@ -1563,10 +1664,10 @@ chk_add_nr()
 		fi
 
 		echo -n " - ack"
-		count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinPortAckRx |
-			awk '{print $2}')
-		[ -z "$count" ] && count=0
-		if [ "$count" != "$ack_nr" ]; then
+		count=$(get_counter ${ns1} "MPTcpExtMPJoinPortAckRx")
+		if [ -z "$count" ]; then
+			echo "[skip]"
+		elif [ "$count" != "$ack_nr" ]; then
 			echo "[fail] got $count JOIN[s] ack with a different \
 				port-number expected $ack_nr"
 			fail_test
@@ -1576,10 +1677,10 @@ chk_add_nr()
 		fi
 
 		printf "%-${nr_blank}s %s" " " "syn"
-		count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMismatchPortSynRx |
-			awk '{print $2}')
-		[ -z "$count" ] && count=0
-		if [ "$count" != "$mis_syn_nr" ]; then
+		count=$(get_counter ${ns1} "MPTcpExtMismatchPortSynRx")
+		if [ -z "$count" ]; then
+			echo -n "[skip]"
+		elif [ "$count" != "$mis_syn_nr" ]; then
 			echo "[fail] got $count JOIN[s] syn with a mismatched \
 				port-number expected $mis_syn_nr"
 			fail_test
@@ -1589,10 +1690,10 @@ chk_add_nr()
 		fi
 
 		echo -n " - ack   "
-		count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMismatchPortAckRx |
-			awk '{print $2}')
-		[ -z "$count" ] && count=0
-		if [ "$count" != "$mis_ack_nr" ]; then
+		count=$(get_counter ${ns1} "MPTcpExtMismatchPortAckRx")
+		if [ -z "$count" ]; then
+			echo "[skip]"
+		elif [ "$count" != "$mis_ack_nr" ]; then
 			echo "[fail] got $count JOIN[s] ack with a mismatched \
 				port-number expected $mis_ack_nr"
 			fail_test
@@ -1636,9 +1737,10 @@ chk_rm_nr()
 	fi
 
 	printf "%-${nr_blank}s %s" " " "rm "
-	count=$(ip netns exec $addr_ns nstat -as | grep MPTcpExtRmAddr | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$rm_addr_nr" ]; then
+	count=$(get_counter ${addr_ns} "MPTcpExtRmAddr")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$rm_addr_nr" ]; then
 		echo "[fail] got $count RM_ADDR[s] expected $rm_addr_nr"
 		fail_test
 		dump_stats=1
@@ -1647,29 +1749,27 @@ chk_rm_nr()
 	fi
 
 	echo -n " - rmsf  "
-	count=$(ip netns exec $subflow_ns nstat -as | grep MPTcpExtRmSubflow | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ -n "$simult" ]; then
+	count=$(get_counter ${subflow_ns} "MPTcpExtRmSubflow")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ -n "$simult" ]; then
 		local cnt suffix
 
-		cnt=$(ip netns exec $addr_ns nstat -as | grep MPTcpExtRmSubflow | awk '{print $2}')
+		cnt=$(get_counter ${addr_ns} "MPTcpExtRmSubflow")
 
 		# in case of simult flush, the subflow removal count on each side is
 		# unreliable
-		[ -z "$cnt" ] && cnt=0
 		count=$((count + cnt))
 		[ "$count" != "$rm_subflow_nr" ] && suffix="$count in [$rm_subflow_nr:$((rm_subflow_nr*2))]"
 		if [ $count -ge "$rm_subflow_nr" ] && \
 		   [ "$count" -le "$((rm_subflow_nr *2 ))" ]; then
-			echo "[ ok ] $suffix"
+			echo -n "[ ok ] $suffix"
 		else
 			echo "[fail] got $count RM_SUBFLOW[s] expected in range [$rm_subflow_nr:$((rm_subflow_nr*2))]"
 			fail_test
 			dump_stats=1
 		fi
-		return
-	fi
-	if [ "$count" != "$rm_subflow_nr" ]; then
+	elif [ "$count" != "$rm_subflow_nr" ]; then
 		echo "[fail] got $count RM_SUBFLOW[s] expected $rm_subflow_nr"
 		fail_test
 		dump_stats=1
@@ -1690,9 +1790,10 @@ chk_prio_nr()
 	local dump_stats
 
 	printf "%-${nr_blank}s %s" " " "ptx"
-	count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioTx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$mp_prio_nr_tx" ]; then
+	count=$(get_counter ${ns1} "MPTcpExtMPPrioTx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$mp_prio_nr_tx" ]; then
 		echo "[fail] got $count MP_PRIO[s] TX expected $mp_prio_nr_tx"
 		fail_test
 		dump_stats=1
@@ -1701,9 +1802,10 @@ chk_prio_nr()
 	fi
 
 	echo -n " - prx   "
-	count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$mp_prio_nr_rx" ]; then
+	count=$(get_counter ${ns1} "MPTcpExtMPPrioRx")
+	if [ -z "$count" ]; then
+		echo "[skip]"
+	elif [ "$count" != "$mp_prio_nr_rx" ]; then
 		echo "[fail] got $count MP_PRIO[s] RX expected $mp_prio_nr_rx"
 		fail_test
 		dump_stats=1
@@ -1819,7 +1921,7 @@ wait_attempt_fail()
 	while [ $time -lt $timeout_ms ]; do
 		local cnt
 
-		cnt=$(ip netns exec $ns nstat -as TcpAttemptFails | grep TcpAttemptFails | awk '{print $2}')
+		cnt=$(get_counter ${ns} "TcpAttemptFails")
 
 		[ "$cnt" = 1 ] && return 1
 		time=$((time + 100))
@@ -1912,23 +2014,23 @@ subflows_error_tests()
 	fi
 
 	# multiple subflows, with subflow creation error
-	if reset "multi subflows, with failing subflow"; then
+	if reset_with_tcp_filter "multi subflows, with failing subflow" ns1 10.0.3.2 REJECT &&
+	   continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then
 		pm_nl_set_limits $ns1 0 2
 		pm_nl_set_limits $ns2 0 2
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
 		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
-		filter_tcp_from $ns1 10.0.3.2 REJECT
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
 		chk_join_nr 1 1 1
 	fi
 
 	# multiple subflows, with subflow timeout on MPJ
-	if reset "multi subflows, with subflow timeout"; then
+	if reset_with_tcp_filter "multi subflows, with subflow timeout" ns1 10.0.3.2 DROP &&
+	   continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then
 		pm_nl_set_limits $ns1 0 2
 		pm_nl_set_limits $ns2 0 2
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
 		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
-		filter_tcp_from $ns1 10.0.3.2 DROP
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
 		chk_join_nr 1 1 1
 	fi
@@ -1936,11 +2038,11 @@ subflows_error_tests()
 	# multiple subflows, check that the endpoint corresponding to
 	# closed subflow (due to reset) is not reused if additional
 	# subflows are added later
-	if reset "multi subflows, fair usage on close"; then
+	if reset_with_tcp_filter "multi subflows, fair usage on close" ns1 10.0.3.2 REJECT &&
+	   continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 0 1
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-		filter_tcp_from $ns1 10.0.3.2 REJECT
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow &
 
 		# mpj subflow will be in TW after the reset
@@ -2040,11 +2142,18 @@ signal_address_tests()
 		# the peer could possibly miss some addr notification, allow retransmission
 		ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
-		chk_join_nr 3 3 3
 
-		# the server will not signal the address terminating
-		# the MPC subflow
-		chk_add_nr 3 3
+		# It is not directly linked to the commit introducing this
+		# symbol but for the parent one which is linked anyway.
+		if ! mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then
+			chk_join_nr 3 3 2
+			chk_add_nr 4 4
+		else
+			chk_join_nr 3 3 3
+			# the server will not signal the address terminating
+			# the MPC subflow
+			chk_add_nr 3 3
+		fi
 	fi
 }
 
@@ -2285,7 +2394,12 @@ remove_tests()
 		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
 		run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
 		chk_join_nr 3 3 3
-		chk_rm_nr 0 3 simult
+
+		if mptcp_lib_kversion_ge 5.18; then
+			chk_rm_nr 0 3 simult
+		else
+			chk_rm_nr 3 3
+		fi
 	fi
 
 	# addresses flush
@@ -2523,7 +2637,8 @@ v4mapped_tests()
 
 mixed_tests()
 {
-	if reset "IPv4 sockets do not use IPv6 addresses"; then
+	if reset "IPv4 sockets do not use IPv6 addresses" &&
+	   continue_if mptcp_lib_kversion_ge 6.3; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 1 1
 		pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
@@ -2532,7 +2647,8 @@ mixed_tests()
 	fi
 
 	# Need an IPv6 mptcp socket to allow subflows of both families
-	if reset "simult IPv4 and IPv6 subflows"; then
+	if reset "simult IPv4 and IPv6 subflows" &&
+	   continue_if mptcp_lib_kversion_ge 6.3; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 1 1
 		pm_nl_add_endpoint $ns1 10.0.1.1 flags signal
@@ -2541,7 +2657,8 @@ mixed_tests()
 	fi
 
 	# cross families subflows will not be created even in fullmesh mode
-	if reset "simult IPv4 and IPv6 subflows, fullmesh 1x1"; then
+	if reset "simult IPv4 and IPv6 subflows, fullmesh 1x1" &&
+	   continue_if mptcp_lib_kversion_ge 6.3; then
 		pm_nl_set_limits $ns1 0 4
 		pm_nl_set_limits $ns2 1 4
 		pm_nl_add_endpoint $ns2 dead:beef:2::2 flags subflow,fullmesh
@@ -2552,7 +2669,8 @@ mixed_tests()
 
 	# fullmesh still tries to create all the possibly subflows with
 	# matching family
-	if reset "simult IPv4 and IPv6 subflows, fullmesh 2x2"; then
+	if reset "simult IPv4 and IPv6 subflows, fullmesh 2x2" &&
+	   continue_if mptcp_lib_kversion_ge 6.3; then
 		pm_nl_set_limits $ns1 0 4
 		pm_nl_set_limits $ns2 2 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
@@ -2565,7 +2683,8 @@ mixed_tests()
 backup_tests()
 {
 	# single subflow, backup
-	if reset "single subflow, backup"; then
+	if reset "single subflow, backup" &&
+	   continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 0 1
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
@@ -2575,7 +2694,8 @@ backup_tests()
 	fi
 
 	# single address, backup
-	if reset "single address, backup"; then
+	if reset "single address, backup" &&
+	   continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
 		pm_nl_set_limits $ns2 1 1
@@ -2586,7 +2706,8 @@ backup_tests()
 	fi
 
 	# single address with port, backup
-	if reset "single address with port, backup"; then
+	if reset "single address with port, backup" &&
+	   continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
 		pm_nl_set_limits $ns2 1 1
@@ -2596,14 +2717,16 @@ backup_tests()
 		chk_prio_nr 1 1
 	fi
 
-	if reset "mpc backup"; then
+	if reset "mpc backup" &&
+	   continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
 		chk_join_nr 0 0 0
 		chk_prio_nr 0 1
 	fi
 
-	if reset "mpc backup both sides"; then
+	if reset "mpc backup both sides" &&
+	   continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
 		pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow,backup
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
@@ -2611,14 +2734,16 @@ backup_tests()
 		chk_prio_nr 1 1
 	fi
 
-	if reset "mpc switch to backup"; then
+	if reset "mpc switch to backup" &&
+	   continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
 		chk_join_nr 0 0 0
 		chk_prio_nr 0 1
 	fi
 
-	if reset "mpc switch to backup both sides"; then
+	if reset "mpc switch to backup both sides" &&
+	   continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
 		pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
@@ -2644,38 +2769,41 @@ verify_listener_events()
 	local family
 	local saddr
 	local sport
+	local name
 
 	if [ $e_type = $LISTENER_CREATED ]; then
-		stdbuf -o0 -e0 printf "\t\t\t\t\t CREATE_LISTENER %s:%s"\
-			$e_saddr $e_sport
+		name="LISTENER_CREATED"
 	elif [ $e_type = $LISTENER_CLOSED ]; then
-		stdbuf -o0 -e0 printf "\t\t\t\t\t CLOSE_LISTENER %s:%s "\
-			$e_saddr $e_sport
+		name="LISTENER_CLOSED"
+	else
+		name="$e_type"
 	fi
 
-	type=$(grep "type:$e_type," $evt |
-	       sed --unbuffered -n 's/.*\(type:\)\([[:digit:]]*\).*$/\2/p;q')
-	family=$(grep "type:$e_type," $evt |
-		 sed --unbuffered -n 's/.*\(family:\)\([[:digit:]]*\).*$/\2/p;q')
-	sport=$(grep "type:$e_type," $evt |
-		sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q')
+	printf "%-${nr_blank}s %s %s:%s " " " "$name" "$e_saddr" "$e_sport"
+
+	if ! mptcp_lib_kallsyms_has "mptcp_event_pm_listener$"; then
+		printf "[skip]: event not supported\n"
+		return
+	fi
+
+	type=$(grep "type:$e_type," $evt | sed -n 's/.*\(type:\)\([[:digit:]]*\).*$/\2/p;q')
+	family=$(grep "type:$e_type," $evt | sed -n 's/.*\(family:\)\([[:digit:]]*\).*$/\2/p;q')
+	sport=$(grep "type:$e_type," $evt | sed -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q')
 	if [ $family ] && [ $family = $AF_INET6 ]; then
-		saddr=$(grep "type:$e_type," $evt |
-			sed --unbuffered -n 's/.*\(saddr6:\)\([0-9a-f:.]*\).*$/\2/p;q')
+		saddr=$(grep "type:$e_type," $evt | sed -n 's/.*\(saddr6:\)\([0-9a-f:.]*\).*$/\2/p;q')
 	else
-		saddr=$(grep "type:$e_type," $evt |
-			sed --unbuffered -n 's/.*\(saddr4:\)\([0-9.]*\).*$/\2/p;q')
+		saddr=$(grep "type:$e_type," $evt | sed -n 's/.*\(saddr4:\)\([0-9.]*\).*$/\2/p;q')
 	fi
 
 	if [ $type ] && [ $type = $e_type ] &&
 	   [ $family ] && [ $family = $e_family ] &&
 	   [ $saddr ] && [ $saddr = $e_saddr ] &&
 	   [ $sport ] && [ $sport = $e_sport ]; then
-		stdbuf -o0 -e0 printf "[ ok ]\n"
+		echo "[ ok ]"
 		return 0
 	fi
 	fail_test
-	stdbuf -o0 -e0 printf "[fail]\n"
+	echo "[fail]"
 }
 
 add_addr_ports_tests()
@@ -2981,7 +3109,8 @@ fullmesh_tests()
 	fi
 
 	# set fullmesh flag
-	if reset "set fullmesh flag test"; then
+	if reset "set fullmesh flag test" &&
+	   continue_if mptcp_lib_kversion_ge 5.18; then
 		pm_nl_set_limits $ns1 4 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
 		pm_nl_set_limits $ns2 4 4
@@ -2991,7 +3120,8 @@ fullmesh_tests()
 	fi
 
 	# set nofullmesh flag
-	if reset "set nofullmesh flag test"; then
+	if reset "set nofullmesh flag test" &&
+	   continue_if mptcp_lib_kversion_ge 5.18; then
 		pm_nl_set_limits $ns1 4 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh
 		pm_nl_set_limits $ns2 4 4
@@ -3001,7 +3131,8 @@ fullmesh_tests()
 	fi
 
 	# set backup,fullmesh flags
-	if reset "set backup,fullmesh flags test"; then
+	if reset "set backup,fullmesh flags test" &&
+	   continue_if mptcp_lib_kversion_ge 5.18; then
 		pm_nl_set_limits $ns1 4 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
 		pm_nl_set_limits $ns2 4 4
@@ -3012,7 +3143,8 @@ fullmesh_tests()
 	fi
 
 	# set nobackup,nofullmesh flags
-	if reset "set nobackup,nofullmesh flags test"; then
+	if reset "set nobackup,nofullmesh flags test" &&
+	   continue_if mptcp_lib_kversion_ge 5.18; then
 		pm_nl_set_limits $ns1 4 4
 		pm_nl_set_limits $ns2 4 4
 		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup,fullmesh
@@ -3025,14 +3157,14 @@ fullmesh_tests()
 
 fastclose_tests()
 {
-	if reset "fastclose test"; then
+	if reset_check_counter "fastclose test" "MPTcpExtMPFastcloseTx"; then
 		run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_client
 		chk_join_nr 0 0 0
 		chk_fclose_nr 1 1
 		chk_rst_nr 1 1 invert
 	fi
 
-	if reset "fastclose server test"; then
+	if reset_check_counter "fastclose server test" "MPTcpExtMPFastcloseRx"; then
 		run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_server
 		chk_join_nr 0 0 0
 		chk_fclose_nr 1 1 invert
@@ -3070,7 +3202,8 @@ fail_tests()
 userspace_tests()
 {
 	# userspace pm type prevents add_addr
-	if reset "userspace pm type prevents add_addr"; then
+	if reset "userspace pm type prevents add_addr" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns1
 		pm_nl_set_limits $ns1 0 2
 		pm_nl_set_limits $ns2 0 2
@@ -3081,7 +3214,8 @@ userspace_tests()
 	fi
 
 	# userspace pm type does not echo add_addr without daemon
-	if reset "userspace pm no echo w/o daemon"; then
+	if reset "userspace pm no echo w/o daemon" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns2
 		pm_nl_set_limits $ns1 0 2
 		pm_nl_set_limits $ns2 0 2
@@ -3092,7 +3226,8 @@ userspace_tests()
 	fi
 
 	# userspace pm type rejects join
-	if reset "userspace pm type rejects join"; then
+	if reset "userspace pm type rejects join" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns1
 		pm_nl_set_limits $ns1 1 1
 		pm_nl_set_limits $ns2 1 1
@@ -3102,7 +3237,8 @@ userspace_tests()
 	fi
 
 	# userspace pm type does not send join
-	if reset "userspace pm type does not send join"; then
+	if reset "userspace pm type does not send join" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns2
 		pm_nl_set_limits $ns1 1 1
 		pm_nl_set_limits $ns2 1 1
@@ -3112,7 +3248,8 @@ userspace_tests()
 	fi
 
 	# userspace pm type prevents mp_prio
-	if reset "userspace pm type prevents mp_prio"; then
+	if reset "userspace pm type prevents mp_prio" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns1
 		pm_nl_set_limits $ns1 1 1
 		pm_nl_set_limits $ns2 1 1
@@ -3123,7 +3260,8 @@ userspace_tests()
 	fi
 
 	# userspace pm type prevents rm_addr
-	if reset "userspace pm type prevents rm_addr"; then
+	if reset "userspace pm type prevents rm_addr" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns1
 		set_userspace_pm $ns2
 		pm_nl_set_limits $ns1 0 1
@@ -3135,7 +3273,8 @@ userspace_tests()
 	fi
 
 	# userspace pm add & remove address
-	if reset_with_events "userspace pm add & remove address"; then
+	if reset_with_events "userspace pm add & remove address" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns1
 		pm_nl_set_limits $ns2 1 1
 		run_tests $ns1 $ns2 10.0.1.1 0 userspace_1 0 slow
@@ -3146,7 +3285,8 @@ userspace_tests()
 	fi
 
 	# userspace pm create destroy subflow
-	if reset_with_events "userspace pm create destroy subflow"; then
+	if reset_with_events "userspace pm create destroy subflow" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns2
 		pm_nl_set_limits $ns1 0 1
 		run_tests $ns1 $ns2 10.0.1.1 0 0 userspace_1 slow
@@ -3158,8 +3298,10 @@ userspace_tests()
 
 endpoint_tests()
 {
+	# subflow_rebuild_header is needed to support the implicit flag
 	# userspace pm type prevents add_addr
-	if reset "implicit EP"; then
+	if reset "implicit EP" &&
+	   mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
 		pm_nl_set_limits $ns1 2 2
 		pm_nl_set_limits $ns2 2 2
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
@@ -3179,7 +3321,8 @@ endpoint_tests()
 		kill_tests_wait
 	fi
 
-	if reset "delete and re-add"; then
+	if reset "delete and re-add" &&
+	   mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
 		pm_nl_set_limits $ns1 1 1
 		pm_nl_set_limits $ns2 1 1
 		pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow
diff --git a/tools/testing/selftests/net/mptcp/mptcp_lib.sh b/tools/testing/selftests/net/mptcp/mptcp_lib.sh
index 3286536b79d5..f32045b23b89 100644
--- a/tools/testing/selftests/net/mptcp/mptcp_lib.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_lib.sh
@@ -38,3 +38,67 @@ mptcp_lib_check_mptcp() {
 		exit ${KSFT_SKIP}
 	fi
 }
+
+mptcp_lib_check_kallsyms() {
+	if ! mptcp_lib_has_file "/proc/kallsyms"; then
+		echo "SKIP: CONFIG_KALLSYMS is missing"
+		exit ${KSFT_SKIP}
+	fi
+}
+
+# Internal: use mptcp_lib_kallsyms_has() instead
+__mptcp_lib_kallsyms_has() {
+	local sym="${1}"
+
+	mptcp_lib_check_kallsyms
+
+	grep -q " ${sym}" /proc/kallsyms
+}
+
+# $1: part of a symbol to look at, add '$' at the end for full name
+mptcp_lib_kallsyms_has() {
+	local sym="${1}"
+
+	if __mptcp_lib_kallsyms_has "${sym}"; then
+		return 0
+	fi
+
+	mptcp_lib_fail_if_expected_feature "${sym} symbol not found"
+}
+
+# $1: part of a symbol to look at, add '$' at the end for full name
+mptcp_lib_kallsyms_doesnt_have() {
+	local sym="${1}"
+
+	if ! __mptcp_lib_kallsyms_has "${sym}"; then
+		return 0
+	fi
+
+	mptcp_lib_fail_if_expected_feature "${sym} symbol has been found"
+}
+
+# !!!AVOID USING THIS!!!
+# Features might not land in the expected version and features can be backported
+#
+# $1: kernel version, e.g. 6.3
+mptcp_lib_kversion_ge() {
+	local exp_maj="${1%.*}"
+	local exp_min="${1#*.}"
+	local v maj min
+
+	# If the kernel has backported features, set this env var to 1:
+	if [ "${SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK:-}" = "1" ]; then
+		return 0
+	fi
+
+	v=$(uname -r | cut -d'.' -f1,2)
+	maj=${v%.*}
+	min=${v#*.}
+
+	if   [ "${maj}" -gt "${exp_maj}" ] ||
+	   { [ "${maj}" -eq "${exp_maj}" ] && [ "${min}" -ge "${exp_min}" ]; }; then
+		return 0
+	fi
+
+	mptcp_lib_fail_if_expected_feature "kernel version ${1} lower than ${v}"
+}
diff --git a/tools/testing/selftests/net/mptcp/mptcp_sockopt.c b/tools/testing/selftests/net/mptcp/mptcp_sockopt.c
index ae61f39556ca..b35148edbf02 100644
--- a/tools/testing/selftests/net/mptcp/mptcp_sockopt.c
+++ b/tools/testing/selftests/net/mptcp/mptcp_sockopt.c
@@ -87,6 +87,10 @@ struct so_state {
 	uint64_t tcpi_rcv_delta;
 };
 
+#ifndef MIN
+#define MIN(a, b) ((a) < (b) ? (a) : (b))
+#endif
+
 static void die_perror(const char *msg)
 {
 	perror(msg);
@@ -349,13 +353,14 @@ static void do_getsockopt_tcp_info(struct so_state *s, int fd, size_t r, size_t
 			xerror("getsockopt MPTCP_TCPINFO (tries %d, %m)");
 
 		assert(olen <= sizeof(ti));
-		assert(ti.d.size_user == ti.d.size_kernel);
-		assert(ti.d.size_user == sizeof(struct tcp_info));
+		assert(ti.d.size_kernel > 0);
+		assert(ti.d.size_user ==
+		       MIN(ti.d.size_kernel, sizeof(struct tcp_info)));
 		assert(ti.d.num_subflows == 1);
 
 		assert(olen > (socklen_t)sizeof(struct mptcp_subflow_data));
 		olen -= sizeof(struct mptcp_subflow_data);
-		assert(olen == sizeof(struct tcp_info));
+		assert(olen == ti.d.size_user);
 
 		if (ti.ti[0].tcpi_bytes_sent == w &&
 		    ti.ti[0].tcpi_bytes_received == r)
@@ -401,13 +406,14 @@ static void do_getsockopt_subflow_addrs(int fd)
 		die_perror("getsockopt MPTCP_SUBFLOW_ADDRS");
 
 	assert(olen <= sizeof(addrs));
-	assert(addrs.d.size_user == addrs.d.size_kernel);
-	assert(addrs.d.size_user == sizeof(struct mptcp_subflow_addrs));
+	assert(addrs.d.size_kernel > 0);
+	assert(addrs.d.size_user ==
+	       MIN(addrs.d.size_kernel, sizeof(struct mptcp_subflow_addrs)));
 	assert(addrs.d.num_subflows == 1);
 
 	assert(olen > (socklen_t)sizeof(struct mptcp_subflow_data));
 	olen -= sizeof(struct mptcp_subflow_data);
-	assert(olen == sizeof(struct mptcp_subflow_addrs));
+	assert(olen == addrs.d.size_user);
 
 	llen = sizeof(local);
 	ret = getsockname(fd, (struct sockaddr *)&local, &llen);
diff --git a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
index ff5adbb9c7f2..f295a371ff14 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
@@ -87,6 +87,7 @@ cleanup()
 }
 
 mptcp_lib_check_mptcp
+mptcp_lib_check_kallsyms
 
 ip -Version > /dev/null 2>&1
 if [ $? -ne 0 ];then
@@ -186,9 +187,14 @@ do_transfer()
 		local_addr="0.0.0.0"
 	fi
 
+	cmsg="TIMESTAMPNS"
+	if mptcp_lib_kallsyms_has "mptcp_ioctl$"; then
+		cmsg+=",TCPINQ"
+	fi
+
 	timeout ${timeout_test} \
 		ip netns exec ${listener_ns} \
-			$mptcp_connect -t ${timeout_poll} -l -M 1 -p $port -s ${srv_proto} -c TIMESTAMPNS,TCPINQ \
+			$mptcp_connect -t ${timeout_poll} -l -M 1 -p $port -s ${srv_proto} -c "${cmsg}" \
 				${local_addr} < "$sin" > "$sout" &
 	local spid=$!
 
@@ -196,7 +202,7 @@ do_transfer()
 
 	timeout ${timeout_test} \
 		ip netns exec ${connector_ns} \
-			$mptcp_connect -t ${timeout_poll} -M 2 -p $port -s ${cl_proto} -c TIMESTAMPNS,TCPINQ \
+			$mptcp_connect -t ${timeout_poll} -M 2 -p $port -s ${cl_proto} -c "${cmsg}" \
 				$connect_addr < "$cin" > "$cout" &
 
 	local cpid=$!
@@ -253,6 +259,11 @@ do_mptcp_sockopt_tests()
 {
 	local lret=0
 
+	if ! mptcp_lib_kallsyms_has "mptcp_diag_fill_info$"; then
+		echo "INFO: MPTCP sockopt not supported: SKIP"
+		return
+	fi
+
 	ip netns exec "$ns_sbox" ./mptcp_sockopt
 	lret=$?
 
@@ -307,6 +318,11 @@ do_tcpinq_tests()
 {
 	local lret=0
 
+	if ! mptcp_lib_kallsyms_has "mptcp_ioctl$"; then
+		echo "INFO: TCP_INQ not supported: SKIP"
+		return
+	fi
+
 	local args
 	for args in "-t tcp" "-r tcp"; do
 		do_tcpinq_test $args
diff --git a/tools/testing/selftests/net/mptcp/pm_netlink.sh b/tools/testing/selftests/net/mptcp/pm_netlink.sh
index 32f7533e0919..d02e0d63a8f9 100755
--- a/tools/testing/selftests/net/mptcp/pm_netlink.sh
+++ b/tools/testing/selftests/net/mptcp/pm_netlink.sh
@@ -73,8 +73,12 @@ check()
 }
 
 check "ip netns exec $ns1 ./pm_nl_ctl dump" "" "defaults addr list"
-check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0
+
+default_limits="$(ip netns exec $ns1 ./pm_nl_ctl limits)"
+if mptcp_lib_expect_all_features; then
+	check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0
 subflows 2" "defaults limits"
+fi
 
 ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.1
 ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.2 flags subflow dev lo
@@ -121,12 +125,10 @@ ip netns exec $ns1 ./pm_nl_ctl flush
 check "ip netns exec $ns1 ./pm_nl_ctl dump" "" "flush addrs"
 
 ip netns exec $ns1 ./pm_nl_ctl limits 9 1
-check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0
-subflows 2" "rcv addrs above hard limit"
+check "ip netns exec $ns1 ./pm_nl_ctl limits" "$default_limits" "rcv addrs above hard limit"
 
 ip netns exec $ns1 ./pm_nl_ctl limits 1 9
-check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0
-subflows 2" "subflows above hard limit"
+check "ip netns exec $ns1 ./pm_nl_ctl limits" "$default_limits" "subflows above hard limit"
 
 ip netns exec $ns1 ./pm_nl_ctl limits 8 8
 check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 8
@@ -176,14 +178,19 @@ subflow,backup 10.0.1.1" "set flags (backup)"
 ip netns exec $ns1 ./pm_nl_ctl set 10.0.1.1 flags nobackup
 check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
 subflow 10.0.1.1" "          (nobackup)"
+
+# fullmesh support has been added later
 ip netns exec $ns1 ./pm_nl_ctl set id 1 flags fullmesh
-check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
+if ip netns exec $ns1 ./pm_nl_ctl dump | grep -q "fullmesh" ||
+   mptcp_lib_expect_all_features; then
+	check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
 subflow,fullmesh 10.0.1.1" "          (fullmesh)"
-ip netns exec $ns1 ./pm_nl_ctl set id 1 flags nofullmesh
-check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
+	ip netns exec $ns1 ./pm_nl_ctl set id 1 flags nofullmesh
+	check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
 subflow 10.0.1.1" "          (nofullmesh)"
-ip netns exec $ns1 ./pm_nl_ctl set id 1 flags backup,fullmesh
-check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
+	ip netns exec $ns1 ./pm_nl_ctl set id 1 flags backup,fullmesh
+	check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
 subflow,backup,fullmesh 10.0.1.1" "          (backup,fullmesh)"
+fi
 
 exit $ret
diff --git a/tools/testing/selftests/net/mptcp/userspace_pm.sh b/tools/testing/selftests/net/mptcp/userspace_pm.sh
index 8092399d911f..98d9e4d2d3fc 100755
--- a/tools/testing/selftests/net/mptcp/userspace_pm.sh
+++ b/tools/testing/selftests/net/mptcp/userspace_pm.sh
@@ -4,11 +4,17 @@
 . "$(dirname "${0}")/mptcp_lib.sh"
 
 mptcp_lib_check_mptcp
+mptcp_lib_check_kallsyms
+
+if ! mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
+	echo "userspace pm tests are not supported by the kernel: SKIP"
+	exit ${KSFT_SKIP}
+fi
 
 ip -Version > /dev/null 2>&1
 if [ $? -ne 0 ];then
 	echo "SKIP: Cannot not run test without ip tool"
-	exit 1
+	exit ${KSFT_SKIP}
 fi
 
 ANNOUNCED=6        # MPTCP_EVENT_ANNOUNCED
@@ -909,6 +915,11 @@ test_listener()
 {
 	print_title "Listener tests"
 
+	if ! mptcp_lib_kallsyms_has "mptcp_event_pm_listener$"; then
+		stdbuf -o0 -e0 printf "LISTENER events                                            \t[SKIP] Not supported\n"
+		return
+	fi
+
 	# Capture events on the network namespace running the client
 	:>$client_evts
 
diff --git a/tools/testing/selftests/ptp/testptp.c b/tools/testing/selftests/ptp/testptp.c
index 198ad5f32187..cfa9562f3cd8 100644
--- a/tools/testing/selftests/ptp/testptp.c
+++ b/tools/testing/selftests/ptp/testptp.c
@@ -502,11 +502,11 @@ int main(int argc, char *argv[])
 			interval = t2 - t1;
 			offset = (t2 + t1) / 2 - tp;
 
-			printf("system time: %lld.%u\n",
+			printf("system time: %lld.%09u\n",
 				(pct+2*i)->sec, (pct+2*i)->nsec);
-			printf("phc    time: %lld.%u\n",
+			printf("phc    time: %lld.%09u\n",
 				(pct+2*i+1)->sec, (pct+2*i+1)->nsec);
-			printf("system time: %lld.%u\n",
+			printf("system time: %lld.%09u\n",
 				(pct+2*i+2)->sec, (pct+2*i+2)->nsec);
 			printf("system/phc clock time offset is %" PRId64 " ns\n"
 			       "system     clock time delay  is %" PRId64 " ns\n",
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config
index 4638c63a339f..6e73b09c20c8 100644
--- a/tools/testing/selftests/tc-testing/config
+++ b/tools/testing/selftests/tc-testing/config
@@ -6,20 +6,18 @@ CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_ZONES=y
 CONFIG_NF_CONNTRACK_LABELS=y
 CONFIG_NF_NAT=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
 
 CONFIG_NET_SCHED=y
 
 #
 # Queueing/Scheduling
 #
-CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_CAKE=m
-CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_CBS=m
 CONFIG_NET_SCH_CHOKE=m
 CONFIG_NET_SCH_CODEL=m
 CONFIG_NET_SCH_DRR=m
-CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_ETF=m
 CONFIG_NET_SCH_FQ=m
 CONFIG_NET_SCH_FQ_CODEL=m
@@ -57,8 +55,6 @@ CONFIG_NET_CLS_FLOW=m
 CONFIG_NET_CLS_FLOWER=m
 CONFIG_NET_CLS_MATCHALL=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_EMATCH=y
 CONFIG_NET_EMATCH_STACK=32
 CONFIG_NET_EMATCH_CMP=m
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
index ba2f5e79cdbf..e21c7f22c6d4 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
@@ -58,10 +58,10 @@
         "setup": [
             "$IP link add dev $DUMMY type dummy || /bin/true"
         ],
-        "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb db 10",
+        "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb db 100",
         "expExitCode": "0",
         "verifyCmd": "$TC qdisc show dev $DUMMY",
-        "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 600s db 10ms",
+        "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 600s db 100ms",
         "matchCount": "1",
         "teardown": [
             "$TC qdisc del dev $DUMMY handle 1: root",
diff --git a/tools/testing/selftests/tc-testing/tdc.sh b/tools/testing/selftests/tc-testing/tdc.sh
index afb0cd86fa3d..eb357bd7923c 100755
--- a/tools/testing/selftests/tc-testing/tdc.sh
+++ b/tools/testing/selftests/tc-testing/tdc.sh
@@ -2,5 +2,6 @@
 # SPDX-License-Identifier: GPL-2.0
 
 modprobe netdevsim
+modprobe sch_teql
 ./tdc.py -c actions --nobuildebpf
 ./tdc.py -c qdisc