summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/hwmon/adc128d818.txt38
-rw-r--r--Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml4
-rw-r--r--Documentation/devicetree/bindings/hwmon/as370.txt11
-rw-r--r--Documentation/devicetree/bindings/hwmon/ibm,opal-sensor.yaml37
-rw-r--r--Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt25
-rw-r--r--Documentation/devicetree/bindings/hwmon/ibmpowernv.txt23
-rw-r--r--Documentation/devicetree/bindings/hwmon/lm87.txt30
-rw-r--r--Documentation/devicetree/bindings/hwmon/max6650.txt28
-rw-r--r--Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml70
-rw-r--r--Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml49
-rw-r--r--Documentation/devicetree/bindings/hwmon/pwm-fan.txt1
-rw-r--r--Documentation/devicetree/bindings/hwmon/st,stts751.yaml41
-rw-r--r--Documentation/devicetree/bindings/hwmon/stts751.txt15
-rw-r--r--Documentation/devicetree/bindings/hwmon/syna,as370.yaml32
-rw-r--r--Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml63
-rw-r--r--Documentation/devicetree/bindings/hwmon/ti,lm87.yaml69
-rw-r--r--Documentation/devicetree/bindings/trivial-devices.yaml4
-rw-r--r--Documentation/hwmon/adm1275.rst14
-rw-r--r--Documentation/hwmon/adp1050.rst64
-rw-r--r--Documentation/hwmon/aquacomputer_d5next.rst9
-rw-r--r--Documentation/hwmon/emc1403.rst17
-rw-r--r--Documentation/hwmon/index.rst2
-rw-r--r--Documentation/hwmon/lm70.rst2
-rw-r--r--Documentation/hwmon/nzxt-kraken3.rst19
-rw-r--r--Documentation/hwmon/pmbus.rst2
-rw-r--r--Documentation/hwmon/xdp710.rst83
-rw-r--r--MAINTAINERS7
-rw-r--r--drivers/acpi/acpi_ipmi.c23
-rw-r--r--drivers/hwmon/Kconfig38
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/acpi_power_meter.c16
-rw-r--r--drivers/hwmon/ad7414.c2
-rw-r--r--drivers/hwmon/adc128d818.c2
-rw-r--r--drivers/hwmon/adm1026.c2
-rw-r--r--drivers/hwmon/adm1029.c2
-rw-r--r--drivers/hwmon/adm1177.c2
-rw-r--r--drivers/hwmon/adt7410.c4
-rw-r--r--drivers/hwmon/adt7411.c2
-rw-r--r--drivers/hwmon/adt7462.c2
-rw-r--r--drivers/hwmon/adt7470.c2
-rw-r--r--drivers/hwmon/aquacomputer_d5next.c51
-rw-r--r--drivers/hwmon/asb100.c2
-rw-r--r--drivers/hwmon/aspeed-g6-pwm-tach.c6
-rw-r--r--drivers/hwmon/atxp1.c2
-rw-r--r--drivers/hwmon/coretemp.c2
-rw-r--r--drivers/hwmon/dell-smm-hwmon.c15
-rw-r--r--drivers/hwmon/ds620.c2
-rw-r--r--drivers/hwmon/emc1403.c838
-rw-r--r--drivers/hwmon/emc2103.c2
-rw-r--r--drivers/hwmon/emc2305.c8
-rw-r--r--drivers/hwmon/emc6w201.c2
-rw-r--r--drivers/hwmon/ftsteutates.c2
-rw-r--r--drivers/hwmon/g760a.c2
-rw-r--r--drivers/hwmon/g762.c4
-rw-r--r--drivers/hwmon/gl518sm.c2
-rw-r--r--drivers/hwmon/gl520sm.c2
-rw-r--r--drivers/hwmon/hih6130.c2
-rw-r--r--drivers/hwmon/hs3001.c2
-rw-r--r--drivers/hwmon/ina209.c2
-rw-r--r--drivers/hwmon/ina238.c2
-rw-r--r--drivers/hwmon/ina3221.c2
-rw-r--r--drivers/hwmon/it87.c127
-rw-r--r--drivers/hwmon/jc42.c4
-rw-r--r--drivers/hwmon/lenovo-ec-sensors.c602
-rw-r--r--drivers/hwmon/lineage-pem.c2
-rw-r--r--drivers/hwmon/lm70.c4
-rw-r--r--drivers/hwmon/lm73.c2
-rw-r--r--drivers/hwmon/lm77.c2
-rw-r--r--drivers/hwmon/lm87.c4
-rw-r--r--drivers/hwmon/lm93.c4
-rw-r--r--drivers/hwmon/lm95241.c4
-rw-r--r--drivers/hwmon/lm95245.c4
-rw-r--r--drivers/hwmon/ltc2945.c2
-rw-r--r--drivers/hwmon/ltc2947-i2c.c2
-rw-r--r--drivers/hwmon/ltc2990.c2
-rw-r--r--drivers/hwmon/ltc2991.c2
-rw-r--r--drivers/hwmon/ltc2992.c2
-rw-r--r--drivers/hwmon/ltc4151.c2
-rw-r--r--drivers/hwmon/ltc4215.c2
-rw-r--r--drivers/hwmon/ltc4222.c2
-rw-r--r--drivers/hwmon/ltc4245.c2
-rw-r--r--drivers/hwmon/ltc4260.c2
-rw-r--r--drivers/hwmon/ltc4261.c2
-rw-r--r--drivers/hwmon/max127.c2
-rw-r--r--drivers/hwmon/max1619.c2
-rw-r--r--drivers/hwmon/max31730.c2
-rw-r--r--drivers/hwmon/max31790.c10
-rw-r--r--drivers/hwmon/max6620.c2
-rw-r--r--drivers/hwmon/max6621.c2
-rw-r--r--drivers/hwmon/max6639.c341
-rw-r--r--drivers/hwmon/max6642.c2
-rw-r--r--drivers/hwmon/mc34vr500.c2
-rw-r--r--drivers/hwmon/nct7802.c2
-rw-r--r--drivers/hwmon/nct7904.c2
-rw-r--r--drivers/hwmon/npcm750-pwm-fan.c7
-rw-r--r--drivers/hwmon/nzxt-kraken3.c58
-rw-r--r--drivers/hwmon/pcf8591.c2
-rw-r--r--drivers/hwmon/pmbus/Kconfig23
-rw-r--r--drivers/hwmon/pmbus/Makefile2
-rw-r--r--drivers/hwmon/pmbus/adm1266.c2
-rw-r--r--drivers/hwmon/pmbus/adm1275.c7
-rw-r--r--drivers/hwmon/pmbus/adp1050.c56
-rw-r--r--drivers/hwmon/pmbus/inspur-ipsps.c2
-rw-r--r--drivers/hwmon/pmbus/ir35221.c2
-rw-r--r--drivers/hwmon/pmbus/ir36021.c2
-rw-r--r--drivers/hwmon/pmbus/ir38064.c8
-rw-r--r--drivers/hwmon/pmbus/irps5401.c2
-rw-r--r--drivers/hwmon/pmbus/lt7182s.c2
-rw-r--r--drivers/hwmon/pmbus/ltc3815.c2
-rw-r--r--drivers/hwmon/pmbus/max15301.c4
-rw-r--r--drivers/hwmon/pmbus/max16064.c2
-rw-r--r--drivers/hwmon/pmbus/max20751.c2
-rw-r--r--drivers/hwmon/pmbus/max31785.c6
-rw-r--r--drivers/hwmon/pmbus/max8688.c2
-rw-r--r--drivers/hwmon/pmbus/mp2888.c2
-rw-r--r--drivers/hwmon/pmbus/mp2975.c136
-rw-r--r--drivers/hwmon/pmbus/mp5990.c2
-rw-r--r--drivers/hwmon/pmbus/mpq8785.c2
-rw-r--r--drivers/hwmon/pmbus/pli1209bc.c2
-rw-r--r--drivers/hwmon/pmbus/pm6764tr.c2
-rw-r--r--drivers/hwmon/pmbus/pxe1610.c6
-rw-r--r--drivers/hwmon/pmbus/stpddc60.c4
-rw-r--r--drivers/hwmon/pmbus/tda38640.c2
-rw-r--r--drivers/hwmon/pmbus/tps40422.c2
-rw-r--r--drivers/hwmon/pmbus/tps546d24.c2
-rw-r--r--drivers/hwmon/pmbus/xdp710.c131
-rw-r--r--drivers/hwmon/pmbus/xdpe12284.c6
-rw-r--r--drivers/hwmon/pmbus/xdpe152c4.c4
-rw-r--r--drivers/hwmon/pt5161l.c2
-rw-r--r--drivers/hwmon/pwm-fan.c45
-rw-r--r--drivers/hwmon/sbrmi.c2
-rw-r--r--drivers/hwmon/sbtsi_temp.c2
-rw-r--r--drivers/hwmon/sht21.c2
-rw-r--r--drivers/hwmon/sht4x.c2
-rw-r--r--drivers/hwmon/smsc47m192.c2
-rw-r--r--drivers/hwmon/stts751.c3
-rw-r--r--drivers/hwmon/tc654.c4
-rw-r--r--drivers/hwmon/tc74.c2
-rw-r--r--drivers/hwmon/tmp102.c2
-rw-r--r--drivers/hwmon/tmp103.c2
-rw-r--r--drivers/hwmon/tmp108.c2
-rw-r--r--drivers/hwmon/w83791d.c2
-rw-r--r--drivers/hwmon/w83792d.c2
-rw-r--r--drivers/hwmon/w83793.c2
-rw-r--r--drivers/hwmon/w83l785ts.c2
-rw-r--r--drivers/hwmon/w83l786ng.c2
-rw-r--r--include/acpi/acpi_bus.h5
147 files changed, 2578 insertions, 964 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt
deleted file mode 100644
index d0ae46d7bac3..000000000000
--- a/Documentation/devicetree/bindings/hwmon/adc128d818.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-TI ADC128D818 ADC System Monitor With Temperature Sensor
---------------------------------------------------------
-
-Operation modes:
-
- - Mode 0: 7 single-ended voltage readings (IN0-IN6),
- 1 temperature reading (internal)
- - Mode 1: 8 single-ended voltage readings (IN0-IN7),
- no temperature
- - Mode 2: 4 pseudo-differential voltage readings
- (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6),
- 1 temperature reading (internal)
- - Mode 3: 4 single-ended voltage readings (IN0-IN3),
- 2 pseudo-differential voltage readings
- (IN4-IN5, IN7-IN6),
- 1 temperature reading (internal)
-
-If no operation mode is configured via device tree, the driver keeps the
-currently active chip operation mode (default is mode 0).
-
-
-Required node properties:
-
- - compatible: must be set to "ti,adc128d818"
- - reg: I2C address of the device
-
-Optional node properties:
-
- - ti,mode: Operation mode (u8) (see above).
-
-
-Example (operation mode 2):
-
- adc128d818@1d {
- compatible = "ti,adc128d818";
- reg = <0x1d>;
- ti,mode = /bits/ 8 <2>;
- };
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
index b68061294964..5b076d677395 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
@@ -5,7 +5,7 @@
$id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
+title: Analog Devices ADM1075/ADM127x/ADM1281/ADM129x digital power monitors
maintainers:
- Krzysztof Kozlowski <krzk@kernel.org>
@@ -27,6 +27,7 @@ properties:
- adi,adm1275
- adi,adm1276
- adi,adm1278
+ - adi,adm1281
- adi,adm1293
- adi,adm1294
@@ -91,6 +92,7 @@ allOf:
contains:
enum:
- adi,adm1278
+ - adi,adm1281
- adi,adm1293
- adi,adm1294
then:
diff --git a/Documentation/devicetree/bindings/hwmon/as370.txt b/Documentation/devicetree/bindings/hwmon/as370.txt
deleted file mode 100644
index d102fe765124..000000000000
--- a/Documentation/devicetree/bindings/hwmon/as370.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-Bindings for Synaptics AS370 PVT sensors
-
-Required properties:
-- compatible : "syna,as370-hwmon"
-- reg : address and length of the register set.
-
-Example:
- hwmon@ea0810 {
- compatible = "syna,as370-hwmon";
- reg = <0xea0810 0xc>;
- };
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,opal-sensor.yaml b/Documentation/devicetree/bindings/hwmon/ibm,opal-sensor.yaml
new file mode 100644
index 000000000000..376ee7f1cdb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibm,opal-sensor.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,opal-sensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM POWERNV platform sensors
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - ibm,opal-sensor-cooling-fan
+ - ibm,opal-sensor-amb-temp
+ - ibm,opal-sensor-power-supply
+ - ibm,opal-sensor-power
+
+ sensor-id:
+ description:
+ An opaque id provided by the firmware to the kernel, identifies a
+ given sensor and its attribute data.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - sensor-id
+
+additionalProperties: false
+
+examples:
+ - |
+ sensor {
+ compatible = "ibm,opal-sensor-cooling-fan";
+ sensor-id = <0x7052107>;
+ };
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt b/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt
deleted file mode 100644
index 5dc5d2e2573d..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Device-tree bindings for I2C-based On-Chip Controller hwmon device
-------------------------------------------------------------------
-
-Required properties:
- - compatible = "ibm,p8-occ-hwmon";
- - reg = <I2C address>; : I2C bus address
-
-Examples:
-
- i2c-bus@100 {
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <100000>;
- < more properties >
-
- occ-hwmon@1 {
- compatible = "ibm,p8-occ-hwmon";
- reg = <0x50>;
- };
-
- occ-hwmon@2 {
- compatible = "ibm,p8-occ-hwmon";
- reg = <0x51>;
- };
- };
diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt
deleted file mode 100644
index f93242be60a1..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-IBM POWERNV platform sensors
-----------------------------
-
-Required node properties:
-- compatible: must be one of
- "ibm,opal-sensor-cooling-fan"
- "ibm,opal-sensor-amb-temp"
- "ibm,opal-sensor-power-supply"
- "ibm,opal-sensor-power"
-- sensor-id: an opaque id provided by the firmware to the kernel, identifies a
- given sensor and its attribute data
-
-Example sensors node:
-
-cooling-fan#8-data {
- sensor-id = <0x7052107>;
- compatible = "ibm,opal-sensor-cooling-fan";
-};
-
-amb-temp#1-thrs {
- sensor-id = <0x5096000>;
- compatible = "ibm,opal-sensor-amb-temp";
-};
diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt
deleted file mode 100644
index 758ff398b67b..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm87.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-*LM87 hwmon sensor.
-
-Required properties:
-- compatible: Should be
- "ti,lm87"
-
-- reg: I2C address
-
-optional properties:
-- has-temp3: This configures pins 18 and 19 to be used as a second
- remote temperature sensing channel. By default the pins
- are configured as voltage input pins in0 and in5.
-
-- has-in6: When set, pin 5 is configured to be used as voltage input
- in6. Otherwise the pin is set as FAN1 input.
-
-- has-in7: When set, pin 6 is configured to be used as voltage input
- in7. Otherwise the pin is set as FAN2 input.
-
-- vcc-supply: a Phandle for the regulator supplying power, can be
- configured to measure 5.0V power supply. Default is 3.3V.
-
-Example:
-
-lm87@2e {
- compatible = "ti,lm87";
- reg = <0x2e>;
- has-temp3;
- vcc-supply = <&reg_5v0>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt
deleted file mode 100644
index f6bd87d8e284..000000000000
--- a/Documentation/devicetree/bindings/hwmon/max6650.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Bindings for MAX6651 and MAX6650 I2C fan controllers
-
-Reference:
-[1] https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
-
-Required properties:
-- compatible : One of "maxim,max6650" or "maxim,max6651"
-- reg : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48.
-
-Optional properties, default is to retain the chip's current setting:
-- maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or
- 12000000 uV.
-- maxim,fan-prescale : Pre-scaling value, as per datasheet [1]. Lower values
- allow more fine-grained control of slower fans.
- Valid: 1, 2, 4, 8, 16.
-- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the
- driver selects closed-loop mode and the requested speed.
- This ensures the fan is already running before userspace
- takes over.
-
-Example:
- fan-max6650: max6650@1b {
- reg = <0x1b>;
- compatible = "maxim,max6650";
- maxim,fan-microvolt = <12000000>;
- maxim,fan-prescale = <4>;
- maxim,fan-target-rpm = <1200>;
- };
diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml
new file mode 100644
index 000000000000..2c26104a5e16
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/maxim,max6650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX6650 and MAX6651 I2C Fan Controllers
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+ The MAX6650 and MAX6651 regulate and monitor the speed
+ of 5VDC/12VDC burshless fans with built-in tachometers.
+
+ Datasheets:
+ https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
+
+properties:
+ compatible:
+ enum:
+ - maxim,max6650
+ - maxim,max6651
+
+ reg:
+ maxItems: 1
+
+ maxim,fan-microvolt:
+ description:
+ The supply voltage of the fan, either 5000000 uV or
+ 12000000 uV.
+ enum: [5000000, 12000000]
+
+ maxim,fan-prescale:
+ description:
+ Pre-scaling value, as per datasheet. Lower values
+ allow more fine-grained control of slower fans.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4, 8, 16]
+
+ maxim,fan-target-rpm:
+ description:
+ Initial requested fan rotation speed. If specified, the
+ driver selects closed-loop mode and the requested speed.
+ This ensures the fan is already running before userspace
+ takes over.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 30000
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan-controller@1b {
+ compatible = "maxim,max6650";
+ reg = <0x1b>;
+ maxim,fan-microvolt = <12000000>;
+ maxim,fan-prescale = <4>;
+ maxim,fan-target-rpm = <1200>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml
new file mode 100644
index 000000000000..10c2204bc3df
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/adi,adp1050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP1050 digital controller with PMBus interface
+
+maintainers:
+ - Radu Sabau <radu.sabau@analog.com>
+
+description: |
+ The ADP1050 is used to monitor system voltages, currents and temperatures.
+ Through the PMBus interface, the ADP1050 targets isolated power supplies
+ and has four individual monitors for input/output voltage, input current
+ and temperature.
+ Datasheet:
+ https://www.analog.com/en/products/adp1050.html
+
+properties:
+ compatible:
+ const: adi,adp1050
+
+ reg:
+ maxItems: 1
+
+ vcc-supply: true
+
+required:
+ - compatible
+ - reg
+ - vcc-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+
+ hwmon@70 {
+ compatible = "adi,adp1050";
+ reg = <0x70>;
+ vcc-supply = <&vcc>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
deleted file mode 100644
index 48886f0ce415..000000000000
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has moved to pwm-fan.yaml.
diff --git a/Documentation/devicetree/bindings/hwmon/st,stts751.yaml b/Documentation/devicetree/bindings/hwmon/st,stts751.yaml
new file mode 100644
index 000000000000..9c825adbed58
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/st,stts751.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/st,stts751.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STTS751 Thermometer
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+ compatible:
+ const: st,stts751
+
+ reg:
+ maxItems: 1
+
+ smbus-timeout-disable:
+ description:
+ When set, the smbus timeout function will be disabled.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ thermometer@48 {
+ compatible = "st,stts751";
+ reg = <0x48>;
+ smbus-timeout-disable;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/hwmon/stts751.txt b/Documentation/devicetree/bindings/hwmon/stts751.txt
deleted file mode 100644
index 3ee1dc30e72f..000000000000
--- a/Documentation/devicetree/bindings/hwmon/stts751.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* STTS751 thermometer.
-
-Required node properties:
-- compatible: "stts751"
-- reg: I2C bus address of the device
-
-Optional properties:
-- smbus-timeout-disable: when set, the smbus timeout function will be disabled
-
-Example stts751 node:
-
-temp-sensor {
- compatible = "stts751";
- reg = <0x48>;
-}
diff --git a/Documentation/devicetree/bindings/hwmon/syna,as370.yaml b/Documentation/devicetree/bindings/hwmon/syna,as370.yaml
new file mode 100644
index 000000000000..1f7005f55247
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/syna,as370.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/syna,as370.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics AS370 PVT sensors
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+ compatible:
+ const: syna,as370-hwmon
+
+ reg:
+ description:
+ Address and length of the register set.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ sensor@ea0810 {
+ compatible = "syna,as370-hwmon";
+ reg = <0xea0810 0xc>;
+ };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml b/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml
new file mode 100644
index 000000000000..a32035409cee
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,adc128d818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC128D818 ADC System Monitor With Temperature Sensor
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+ The ADC128D818 is a 12-Bit, 8-Channel Analog to Digital Converter (ADC)
+ with a temperature sensor and an I2C interface.
+
+ Datasheets:
+ https://www.ti.com/product/ADC128D818
+
+properties:
+ compatible:
+ const: ti,adc128d818
+
+ reg:
+ maxItems: 1
+
+ ti,mode:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description: |
+ Operation mode.
+ Mode 0 - 7 single-ended voltage readings (IN0-IN6), 1 temperature
+ reading (internal).
+ Mode 1 - 8 single-ended voltage readings (IN0-IN7), no temperature.
+ Mode 2 - 4 pseudo-differential voltage readings
+ (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6), 1 temperature reading (internal).
+ Mode 3 - 4 single-ended voltage readings (IN0-IN3), 2 pseudo-differential
+ voltage readings (IN4-IN5, IN7-IN6), 1 temperature reading (internal).
+ default: 0
+
+ vref-supply:
+ description:
+ The regulator to use as an external reference. If it does not exist, the
+ internal reference will be used.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@1d {
+ compatible = "ti,adc128d818";
+ reg = <0x1d>;
+ vref-supply = <&vref>;
+ ti,mode = /bits/ 8 <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml b/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml
new file mode 100644
index 000000000000..f553235a7321
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,lm87.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LM87 Hardware Monitor
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+ The LM87 is a serial interface system hardware monitor
+ with remote diode temperature sensing.
+
+ Datasheets:
+ https://www.ti.com/product/LM87
+
+properties:
+ compatible:
+ const: ti,lm87
+
+ reg:
+ maxItems: 1
+
+ has-temp3:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ This configures pins 18 and 19 to be used as a second
+ remote temperature sensing channel. By default the pins
+ are configured as voltage input pins in0 and in5.
+
+ has-in6:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When set, pin 5 is configured to be used as voltage input
+ in6. Otherwise the pin is set as FAN1 input.
+
+ has-in7:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When set, pin 6 is configured to be used as voltage input
+ in7. Otherwise the pin is set as FAN2 input.
+
+ vcc-supply:
+ description:
+ Regulator supplying power, can be configured to measure
+ 5.0V power supply. Default is 3.3V.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@2e {
+ compatible = "ti,lm87";
+ reg = <0x2e>;
+ has-temp3;
+ vcc-supply = <&reg_5v0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index e07be7bf8395..025d50454f88 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -126,6 +126,8 @@ properties:
- ibm,cffps1
# IBM Common Form Factor Power Supply Versions 2
- ibm,cffps2
+ # IBM On-Chip Controller hwmon device
+ - ibm,p8-occ-hwmon
# Infineon barometric pressure and temperature sensor
- infineon,dps310
# Infineon IR36021 digital POL buck controller
@@ -134,6 +136,8 @@ properties:
- infineon,irps5401
# Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
- infineon,tlv493d-a1b6
+ # Infineon Hot-swap controller xdp710
+ - infineon,xdp710
# Infineon Multi-phase Digital VR Controller xdpe11280
- infineon,xdpe11280
# Infineon Multi-phase Digital VR Controller xdpe12254
diff --git a/Documentation/hwmon/adm1275.rst b/Documentation/hwmon/adm1275.rst
index 804590eeabdc..467daf8ce3c5 100644
--- a/Documentation/hwmon/adm1275.rst
+++ b/Documentation/hwmon/adm1275.rst
@@ -43,6 +43,14 @@ Supported chips:
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf
+ * Analog Devices ADM1281
+
+ Prefix: 'adm1281'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adm1281.pdf
+
* Analog Devices ADM1293/ADM1294
Prefix: 'adm1293', 'adm1294'
@@ -58,10 +66,10 @@ Description
-----------
This driver supports hardware monitoring for Analog Devices ADM1075, ADM1272,
-ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 Hot-Swap Controller and
+ADM1275, ADM1276, ADM1278, ADM1281, ADM1293, and ADM1294 Hot-Swap Controller and
Digital Power Monitors.
-ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 are hot-swap
+ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1281, ADM1293, and ADM1294 are hot-swap
controllers that allow a circuit board to be removed from or inserted into
a live backplane. They also feature current and voltage readback via an
integrated 12 bit analog-to-digital converter (ADC), accessed using a
@@ -144,5 +152,5 @@ temp1_highest Highest observed temperature.
temp1_reset_history Write any value to reset history.
Temperature attributes are supported on ADM1272 and
- ADM1278.
+ ADM1278, and ADM1281.
======================= =======================================================
diff --git a/Documentation/hwmon/adp1050.rst b/Documentation/hwmon/adp1050.rst
new file mode 100644
index 000000000000..8fa937064886
--- /dev/null
+++ b/Documentation/hwmon/adp1050.rst
@@ -0,0 +1,64 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver adp1050
+=====================
+
+Supported chips:
+
+ * Analog Devices ADP1050
+
+ Prefix: 'adp1050'
+
+ Addresses scanned: I2C 0x70 - 0x77
+
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1050.pdf
+
+Authors:
+
+ - Radu Sabau <radu.sabau@analog.com>
+
+
+Description
+-----------
+
+This driver supprts hardware monitoring for Analog Devices ADP1050 Digital
+Controller for Isolated Power Supply with PMBus interface.
+
+The ADP1050 is an advanced digital controller with a PMBusâ„¢
+interface targeting high density, high efficiency dc-to-dc power
+conversion used to monitor system temperatures, voltages and currents.
+Through the PMBus interface, the device can monitor input/output voltages,
+input current and temperature.
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate
+the devices explicitly.
+Please see Documentation/i2c/instantiating-devices.rst for details.
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+Sysfs Attributes
+----------------
+
+================= ========================================
+in1_label "vin"
+in1_input Measured input voltage
+in1_alarm Input voltage alarm
+in2_label "vout1"
+in2_input Measured output voltage
+in2_crit Critical maximum output voltage
+in2_crit_alarm Output voltage high alarm
+in2_lcrit Critical minimum output voltage
+in2_lcrit_alarm Output voltage critical low alarm
+curr1_label "iin"
+curr1_input Measured input current.
+curr1_alarm Input current alarm
+temp1_input Measured temperature
+temp1_crit Critical high temperature
+temp1_crit_alarm Chip temperature critical high alarm
+================= ========================================
diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
index cb073c79479c..49163f387b90 100644
--- a/Documentation/hwmon/aquacomputer_d5next.rst
+++ b/Documentation/hwmon/aquacomputer_d5next.rst
@@ -45,9 +45,9 @@ seems to require sending it a complete configuration. That includes addressable
RGB LEDs, for which there is no standard sysfs interface. Thus, that task is
better suited for userspace tools.
-The Octo exposes four physical and sixteen virtual temperature sensors, as well as
-eight PWM controllable fans, along with their speed (in RPM), power, voltage and
-current.
+The Octo exposes four physical and sixteen virtual temperature sensors, a flow sensor
+as well as eight PWM controllable fans, along with their speed (in RPM), power, voltage
+and current. Flow sensor pulses are also available.
The Quadro exposes four physical and sixteen virtual temperature sensors, a flow
sensor and four PWM controllable fans, along with their speed (in RPM), power,
@@ -95,11 +95,12 @@ Sysfs entries
================ ==============================================================
temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
temp[1-8]_offset Temperature sensor correction offset (in millidegrees Celsius)
-fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h)
+fan[1-9]_input Pump/fan speed (in RPM) / Flow speed (in dL/h)
fan1_min Minimal fan speed (in RPM)
fan1_max Maximal fan speed (in RPM)
fan1_target Target fan speed (in RPM)
fan5_pulses Quadro flow sensor pulses
+fan9_pulses Octo flow sensor pulses
power[1-8]_input Pump/fan power (in micro Watts)
in[0-7]_input Pump/fan voltage (in milli Volts)
curr[1-8]_input Pump/fan current (in milli Amperes)
diff --git a/Documentation/hwmon/emc1403.rst b/Documentation/hwmon/emc1403.rst
index 0de9616b24ed..57f833b1a800 100644
--- a/Documentation/hwmon/emc1403.rst
+++ b/Documentation/hwmon/emc1403.rst
@@ -45,6 +45,17 @@ Supported chips:
- https://ww1.microchip.com/downloads/en/DeviceDoc/1423_1424.pdf
+ * SMSC / Microchip EMC1428, EMC1438
+
+ Addresses scanned: I2C 0x18, 0x4c, 0x4d
+
+ Prefix: 'emc1428', 'emc1438'
+
+ Datasheets:
+
+ - https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/20005275A.pdf
+ - https://ww1.microchip.com/downloads/en/DeviceDoc/EMC1438%20DS%20Rev.%201.0%20(04-29-10).pdf
+
Author:
Kalhan Trisal <kalhan.trisal@intel.com
@@ -53,10 +64,10 @@ Description
-----------
The Standard Microsystems Corporation (SMSC) / Microchip EMC14xx chips
-contain up to four temperature sensors. EMC14x2 support two sensors
+contain up to eight temperature sensors. EMC14x2 support two sensors
(one internal, one external). EMC14x3 support three sensors (one internal,
-two external), and EMC14x4 support four sensors (one internal, three
-external).
+two external), EMC14x4 support four sensors (one internal, three external),
+and EMC14x8 support eight sensors (one internal, seven external).
The chips implement three limits for each sensor: low (tempX_min), high
(tempX_max) and critical (tempX_crit.) The chips also implement an
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 1ca7a4fe1f8f..03d313af469a 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -33,6 +33,7 @@ Hardware Monitoring Kernel Drivers
adm1266
adm1275
adm9240
+ adp1050
ads7828
adt7410
adt7411
@@ -250,6 +251,7 @@ Hardware Monitoring Kernel Drivers
wm831x
wm8350
xgene-hwmon
+ xdp710
xdpe12284
xdpe152c4
zl6100
diff --git a/Documentation/hwmon/lm70.rst b/Documentation/hwmon/lm70.rst
index 11303a7e16a8..02ed60dddffb 100644
--- a/Documentation/hwmon/lm70.rst
+++ b/Documentation/hwmon/lm70.rst
@@ -5,7 +5,7 @@ Supported chips:
* National Semiconductor LM70
- Datasheet: http://www.national.com/pf/LM/LM70.html
+ Datasheet: https://www.ti.com/product/LM70
* Texas Instruments TMP121/TMP123
diff --git a/Documentation/hwmon/nzxt-kraken3.rst b/Documentation/hwmon/nzxt-kraken3.rst
index 90fd9dec15ff..57fe99d23301 100644
--- a/Documentation/hwmon/nzxt-kraken3.rst
+++ b/Documentation/hwmon/nzxt-kraken3.rst
@@ -11,17 +11,20 @@ Supported devices:
* NZXT Kraken Z53
* NZXT Kraken Z63
* NZXT Kraken Z73
+* NZXT Kraken 2023
+* NZXT Kraken 2023 Elite
Author: Jonas Malaco, Aleksa Savic
Description
-----------
-This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73 and
-Z53/Z63/Z73 all-in-one CPU liquid coolers. All models expose liquid temperature
-and pump speed (in RPM), as well as PWM control (either as a fixed value
-or through a temp-PWM curve). The Z-series models additionally expose the speed
-and duty of an optionally connected fan, with the same PWM control capabilities.
+This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73,
+Z53/Z63/Z73 and Kraken 2023 (standard and Elite) all-in-one CPU liquid coolers.
+All models expose liquid temperature and pump speed (in RPM), as well as PWM
+control (either as a fixed value or through a temp-PWM curve). The Z-series and
+Kraken 2023 models additionally expose the speed and duty of an optionally connected
+fan, with the same PWM control capabilities.
Pump and fan duty control mode can be set through pwm[1-2]_enable, where 1 is
for the manual control mode and 2 is for the liquid temp to PWM curve mode.
@@ -39,9 +42,9 @@ The devices can report if they are faulty. The driver supports that situation
and will issue a warning. This can also happen when the USB cable is connected,
but SATA power is not.
-The addressable RGB LEDs and LCD screen (only on Z-series models) are not
-supported in this driver, but can be controlled through existing userspace tools,
-such as `liquidctl`_.
+The addressable RGB LEDs and LCD screen (only on Z-series and Kraken 2023 models)
+are not supported in this driver, but can be controlled through existing userspace
+tools, such as `liquidctl`_.
.. _liquidctl: https://github.com/liquidctl/liquidctl
diff --git a/Documentation/hwmon/pmbus.rst b/Documentation/hwmon/pmbus.rst
index eb1569bfa676..d477124cf67f 100644
--- a/Documentation/hwmon/pmbus.rst
+++ b/Documentation/hwmon/pmbus.rst
@@ -152,7 +152,7 @@ Emerson DS1200 power modules might look as follows::
}
static const struct i2c_device_id ds1200_id[] = {
- {"ds1200", 0},
+ {"ds1200"},
{}
};
diff --git a/Documentation/hwmon/xdp710.rst b/Documentation/hwmon/xdp710.rst
new file mode 100644
index 000000000000..083891f27818
--- /dev/null
+++ b/Documentation/hwmon/xdp710.rst
@@ -0,0 +1,83 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver xdp710
+====================
+
+Supported chips:
+
+ * Infineon XDP710
+
+ Prefix: 'xdp710'
+
+ * Datasheet
+
+ Publicly available at the Infineon website : https://www.infineon.com/dgdl/Infineon-XDP710-001-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c8412f8d301848a5316290b97
+
+Author:
+
+ Peter Yin <peteryin.openbmc@gmail.com>
+
+Description
+-----------
+
+This driver implements support for Infineon XDP710 Hot-Swap Controller.
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+Device supports direct and linear format for reading input voltage,
+output voltage, output current, input power and temperature.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_max**
+
+**in1_max_alarm**
+
+**in1_min**
+
+**in1_min_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_alarm**
+
+**curr1_max**
+
+The driver provides the following attributes for input power:
+
+**power1_input**
+
+**power1_label**
+
+**power1_alarm**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_max_alarm**
+
+**temp1_crit**
+
+**temp1_crit_alarm**
diff --git a/MAINTAINERS b/MAINTAINERS
index b89e841aa632..8044df027531 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -479,6 +479,13 @@ L: linux-wireless@vger.kernel.org
S: Orphan
F: drivers/net/wireless/admtek/adm8211.*
+ADP1050 HARDWARE MONITOR DRIVER
+M: Radu Sabau <radu.sabau@analog.com>
+L: linux-hwmon@vger.kernel.org
+S: Supported
+W: https://ez.analog.com/linux-software-drivers
+F: Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml
+
ADP1653 FLASH CONTROLLER DRIVER
M: Sakari Ailus <sakari.ailus@iki.fi>
L: linux-media@vger.kernel.org
diff --git a/drivers/acpi/acpi_ipmi.c b/drivers/acpi/acpi_ipmi.c
index 0555f68c2dfd..5fba4dab5d08 100644
--- a/drivers/acpi/acpi_ipmi.c
+++ b/drivers/acpi/acpi_ipmi.c
@@ -22,6 +22,8 @@ MODULE_LICENSE("GPL");
/* the IPMI timeout is 5s */
#define IPMI_TIMEOUT (5000)
#define ACPI_IPMI_MAX_MSG_LENGTH 64
+/* 2s should be suffient for SMI being selected */
+#define ACPI_IPMI_SMI_SELECTION_TIMEOUT (2 * HZ)
struct acpi_ipmi_device {
/* the device list attached to driver_data.ipmi_devices */
@@ -54,6 +56,7 @@ struct ipmi_driver_data {
* to this selected global IPMI system interface.
*/
struct acpi_ipmi_device *selected_smi;
+ struct completion smi_selection_done;
};
struct acpi_ipmi_msg {
@@ -463,8 +466,10 @@ static void ipmi_register_bmc(int iface, struct device *dev)
if (temp->handle == handle)
goto err_lock;
}
- if (!driver_data.selected_smi)
+ if (!driver_data.selected_smi) {
driver_data.selected_smi = ipmi_device;
+ complete(&driver_data.smi_selection_done);
+ }
list_add_tail(&ipmi_device->head, &driver_data.ipmi_devices);
mutex_unlock(&driver_data.ipmi_lock);
@@ -578,6 +583,20 @@ out_msg:
return status;
}
+int acpi_wait_for_acpi_ipmi(void)
+{
+ long ret;
+
+ ret = wait_for_completion_interruptible_timeout(&driver_data.smi_selection_done,
+ ACPI_IPMI_SMI_SELECTION_TIMEOUT);
+
+ if (ret <= 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_wait_for_acpi_ipmi);
+
static int __init acpi_ipmi_init(void)
{
int result;
@@ -586,6 +605,8 @@ static int __init acpi_ipmi_init(void)
if (acpi_disabled)
return 0;
+ init_completion(&driver_data.smi_selection_done);
+
status = acpi_install_address_space_handler(ACPI_ROOT_OBJECT,
ACPI_ADR_SPACE_IPMI,
&acpi_ipmi_space_handler,
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 83945397b6eb..e14ae18a973b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -40,7 +40,7 @@ comment "Native drivers"
config SENSORS_ABITUGURU
tristate "Abit uGuru (rev 1 & 2)"
- depends on (X86 && DMI) || COMPILE_TEST
+ depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT
help
If you say yes here you get support for the sensor part of the first
and second revision of the Abit uGuru chip. The voltage and frequency
@@ -55,7 +55,7 @@ config SENSORS_ABITUGURU
config SENSORS_ABITUGURU3
tristate "Abit uGuru (rev 3)"
- depends on (X86 && DMI) || COMPILE_TEST
+ depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT
help
If you say yes here you get support for the sensor part of the
third revision of the Abit uGuru chip. Only reading the sensors
@@ -611,6 +611,7 @@ config SENSORS_SPARX5
config SENSORS_F71805F
tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for hardware monitoring
@@ -622,6 +623,7 @@ config SENSORS_F71805F
config SENSORS_F71882FG
tristate "Fintek F71882FG and compatibles"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for hardware monitoring
@@ -854,6 +856,7 @@ config SENSORS_CORETEMP
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
@@ -914,6 +917,16 @@ config SENSORS_LAN966X
This driver can also be built as a module. If so, the module
will be called lan966x-hwmon.
+config SENSORS_LENOVO_EC
+ tristate "Sensor reader for Lenovo ThinkStations"
+ depends on X86
+ help
+ If you say yes here you get support for LENOVO
+ EC Sensor data on newer ThinkStation systems
+
+ This driver can also be built as a module. If so, the module
+ will be called lenovo_ec_sensors.
+
config SENSORS_LINEAGE
tristate "Lineage Compact Power Line Power Entry Module"
depends on I2C
@@ -1220,6 +1233,7 @@ config SENSORS_MAX6621
config SENSORS_MAX6639
tristate "Maxim MAX6639 sensor chip"
depends on I2C
+ select REGMAP_I2C
help
If you say yes here you get support for the MAX6639
sensor chips.
@@ -1561,6 +1575,7 @@ config SENSORS_LM95245
config SENSORS_PC87360
tristate "National Semiconductor PC87360 family"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
@@ -1575,6 +1590,7 @@ config SENSORS_PC87360
config SENSORS_PC87427
tristate "National Semiconductor PC87427"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get access to the hardware monitoring
@@ -1606,6 +1622,7 @@ config SENSORS_NTC_THERMISTOR
config SENSORS_NCT6683
tristate "Nuvoton NCT6683D"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for the hardware monitoring
@@ -1627,6 +1644,7 @@ config SENSORS_NCT6775_CORE
config SENSORS_NCT6775
tristate "Platform driver for Nuvoton NCT6775F and compatibles"
+ depends on HAS_IOPORT
depends on !PPC
depends on ACPI || ACPI=n
select HWMON_VID
@@ -1778,7 +1796,7 @@ config SENSORS_PT5161L
config SENSORS_PWM_FAN
tristate "PWM fan"
- depends on (PWM && OF) || COMPILE_TEST
+ depends on PWM || COMPILE_TEST
depends on THERMAL || THERMAL=n
help
If you say yes here you get support for fans connected to PWM lines.
@@ -1883,7 +1901,7 @@ config SENSORS_SHTC1
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes here you get support for the integrated sensors in
SiS5595 South Bridges.
@@ -1903,6 +1921,7 @@ config SENSORS_SY7636A
config SENSORS_DME1737
tristate "SMSC DME1737, SCH311x and compatibles"
+ depends on HAS_IOPORT
depends on I2C && !PPC
select HWMON_VID
help
@@ -1959,6 +1978,7 @@ config SENSORS_EMC6W201
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for the integrated fan
@@ -1993,6 +2013,7 @@ config SENSORS_SMSC47M192
config SENSORS_SMSC47B397
tristate "SMSC LPC47B397-NC"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for the SMSC LPC47B397-NC
@@ -2007,6 +2028,7 @@ config SENSORS_SCH56XX_COMMON
config SENSORS_SCH5627
tristate "SMSC SCH5627"
+ depends on HAS_IOPORT
depends on !PPC && WATCHDOG
select SENSORS_SCH56XX_COMMON
select WATCHDOG_CORE
@@ -2020,6 +2042,7 @@ config SENSORS_SCH5627
config SENSORS_SCH5636
tristate "SMSC SCH5636"
+ depends on HAS_IOPORT
depends on !PPC && WATCHDOG
select SENSORS_SCH56XX_COMMON
select WATCHDOG_CORE
@@ -2272,7 +2295,7 @@ config SENSORS_VIA_CPUTEMP
config SENSORS_VIA686A
tristate "VIA686A"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes here you get support for the integrated sensors in
Via 686A/B South Bridges.
@@ -2282,6 +2305,7 @@ config SENSORS_VIA686A
config SENSORS_VT1211
tristate "VIA VT1211"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
@@ -2293,7 +2317,7 @@ config SENSORS_VT1211
config SENSORS_VT8231
tristate "VIA VT8231"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select HWMON_VID
help
If you say yes here then you get support for the integrated sensors
@@ -2401,6 +2425,7 @@ config SENSORS_W83L786NG
config SENSORS_W83627HF
tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
@@ -2413,6 +2438,7 @@ config SENSORS_W83627HF
config SENSORS_W83627EHF
tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 5c31808f6378..e3f25475d1f0 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -108,6 +108,7 @@ obj-$(CONFIG_SENSORS_JC42) += jc42.o
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o
obj-$(CONFIG_SENSORS_LAN966X) += lan966x-hwmon.o
+obj-$(CONFIG_SENSORS_LENOVO_EC) += lenovo-ec-sensors.o
obj-$(CONFIG_SENSORS_LINEAGE) += lineage-pem.o
obj-$(CONFIG_SENSORS_LOCHNAGAR) += lochnagar-hwmon.o
obj-$(CONFIG_SENSORS_LM63) += lm63.o
diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c
index 703666b95bf4..6c8a9c863528 100644
--- a/drivers/hwmon/acpi_power_meter.c
+++ b/drivers/hwmon/acpi_power_meter.c
@@ -883,6 +883,22 @@ static int acpi_power_meter_add(struct acpi_device *device)
strcpy(acpi_device_class(device), ACPI_POWER_METER_CLASS);
device->driver_data = resource;
+#if IS_REACHABLE(CONFIG_ACPI_IPMI)
+ /*
+ * On Dell systems several methods of acpi_power_meter access
+ * variables in IPMI region, so wait until IPMI space handler is
+ * installed by acpi_ipmi and also wait until SMI is selected to make
+ * the space handler fully functional.
+ */
+ if (dmi_match(DMI_SYS_VENDOR, "Dell Inc.")) {
+ struct acpi_device *ipi_device = acpi_dev_get_first_match_dev("IPI0001", NULL, -1);
+
+ if (ipi_device && acpi_wait_for_acpi_ipmi())
+ dev_warn(&device->dev, "Waiting for ACPI IPMI timeout");
+ acpi_dev_put(ipi_device);
+ }
+#endif
+
res = read_capabilities(resource);
if (res)
goto exit_free;
diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
index 7f1bef59046f..f0b17e59827f 100644
--- a/drivers/hwmon/ad7414.c
+++ b/drivers/hwmon/ad7414.c
@@ -205,7 +205,7 @@ static int ad7414_probe(struct i2c_client *client)
}
static const struct i2c_device_id ad7414_id[] = {
- { "ad7414", 0 },
+ { "ad7414" },
{}
};
MODULE_DEVICE_TABLE(i2c, ad7414_id);
diff --git a/drivers/hwmon/adc128d818.c b/drivers/hwmon/adc128d818.c
index 321a61977396..8ac6e735ec5c 100644
--- a/drivers/hwmon/adc128d818.c
+++ b/drivers/hwmon/adc128d818.c
@@ -480,7 +480,7 @@ static int adc128_probe(struct i2c_client *client)
}
static const struct i2c_device_id adc128_id[] = {
- { "adc128d818", 0 },
+ { "adc128d818" },
{ }
};
MODULE_DEVICE_TABLE(i2c, adc128_id);
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 581d8edf70ea..80d09b017d3b 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -1849,7 +1849,7 @@ static int adm1026_probe(struct i2c_client *client)
}
static const struct i2c_device_id adm1026_id[] = {
- { "adm1026", 0 },
+ { "adm1026" },
{ }
};
MODULE_DEVICE_TABLE(i2c, adm1026_id);
diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c
index 9a465f3f71c8..761c13092488 100644
--- a/drivers/hwmon/adm1029.c
+++ b/drivers/hwmon/adm1029.c
@@ -379,7 +379,7 @@ static int adm1029_probe(struct i2c_client *client)
}
static const struct i2c_device_id adm1029_id[] = {
- { "adm1029", 0 },
+ { "adm1029" },
{ }
};
MODULE_DEVICE_TABLE(i2c, adm1029_id);
diff --git a/drivers/hwmon/adm1177.c b/drivers/hwmon/adm1177.c
index 3390102d2d4a..8b2c965480e3 100644
--- a/drivers/hwmon/adm1177.c
+++ b/drivers/hwmon/adm1177.c
@@ -238,7 +238,7 @@ static int adm1177_probe(struct i2c_client *client)
}
static const struct i2c_device_id adm1177_id[] = {
- {"adm1177", 0},
+ {"adm1177"},
{}
};
MODULE_DEVICE_TABLE(i2c, adm1177_id);
diff --git a/drivers/hwmon/adt7410.c b/drivers/hwmon/adt7410.c
index d15f64d4b6e7..3bf0e0a0882c 100644
--- a/drivers/hwmon/adt7410.c
+++ b/drivers/hwmon/adt7410.c
@@ -88,8 +88,8 @@ static int adt7410_i2c_probe(struct i2c_client *client)
}
static const struct i2c_device_id adt7410_ids[] = {
- { "adt7410", 0 },
- { "adt7420", 0 },
+ { "adt7410" },
+ { "adt7420" },
{}
};
MODULE_DEVICE_TABLE(i2c, adt7410_ids);
diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c
index 45fe4e8aae4e..08d0effd97f7 100644
--- a/drivers/hwmon/adt7411.c
+++ b/drivers/hwmon/adt7411.c
@@ -697,7 +697,7 @@ static int adt7411_probe(struct i2c_client *client)
}
static const struct i2c_device_id adt7411_id[] = {
- { "adt7411", 0 },
+ { "adt7411" },
{ }
};
MODULE_DEVICE_TABLE(i2c, adt7411_id);
diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c
index 429566c4245d..174dfee47f7a 100644
--- a/drivers/hwmon/adt7462.c
+++ b/drivers/hwmon/adt7462.c
@@ -1809,7 +1809,7 @@ static int adt7462_probe(struct i2c_client *client)
}
static const struct i2c_device_id adt7462_id[] = {
- { "adt7462", 0 },
+ { "adt7462" },
{ }
};
MODULE_DEVICE_TABLE(i2c, adt7462_id);
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index c4b3a4a18670..517248d2994e 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -1304,7 +1304,7 @@ static void adt7470_remove(struct i2c_client *client)
}
static const struct i2c_device_id adt7470_id[] = {
- { "adt7470", 0 },
+ { "adt7470" },
{ }
};
MODULE_DEVICE_TABLE(i2c, adt7470_id);
diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
index 2efe97f8d003..8e55cd2f46f5 100644
--- a/drivers/hwmon/aquacomputer_d5next.c
+++ b/drivers/hwmon/aquacomputer_d5next.c
@@ -202,16 +202,19 @@ static u16 aquastreamult_sensor_fan_offsets[] = { AQUASTREAMULT_FAN_OFFSET };
#define OCTO_NUM_FANS 8
#define OCTO_NUM_SENSORS 4
#define OCTO_NUM_VIRTUAL_SENSORS 16
+#define OCTO_NUM_FLOW_SENSORS 1
#define OCTO_CTRL_REPORT_SIZE 0x65F
/* Sensor report offsets for the Octo */
#define OCTO_POWER_CYCLES 0x18
#define OCTO_SENSOR_START 0x3D
#define OCTO_VIRTUAL_SENSORS_START 0x45
+#define OCTO_FLOW_SENSOR_OFFSET 0x7B
static u16 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 };
/* Control report offsets for the Octo */
#define OCTO_TEMP_CTRL_OFFSET 0xA
+#define OCTO_FLOW_PULSES_CTRL_OFFSET 0x6
/* Fan speed offsets (0-100%) */
static u16 octo_ctrl_fan_offsets[] = { 0x5B, 0xB0, 0x105, 0x15A, 0x1AF, 0x204, 0x259, 0x2AE };
@@ -363,18 +366,6 @@ static const char *const label_aquaero_calc_temp_sensors[] = {
"Calc. virtual sensor 4"
};
-/* Labels for Octo and Quadro (except speed) */
-static const char *const label_fan_speed[] = {
- "Fan 1 speed",
- "Fan 2 speed",
- "Fan 3 speed",
- "Fan 4 speed",
- "Fan 5 speed",
- "Fan 6 speed",
- "Fan 7 speed",
- "Fan 8 speed"
-};
-
static const char *const label_fan_power[] = {
"Fan 1 power",
"Fan 2 power",
@@ -408,6 +399,19 @@ static const char *const label_fan_current[] = {
"Fan 8 current"
};
+/* Labels for Octo fan speeds */
+static const char *const label_octo_speeds[] = {
+ "Fan 1 speed",
+ "Fan 2 speed",
+ "Fan 3 speed",
+ "Fan 4 speed",
+ "Fan 5 speed",
+ "Fan 6 speed",
+ "Fan 7 speed",
+ "Fan 8 speed",
+ "Flow speed [dL/h]",
+};
+
/* Labels for Quadro fan speeds */
static const char *const label_quadro_speeds[] = {
"Fan 1 speed",
@@ -844,6 +848,7 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
return 0444;
break;
case aquaero:
+ case octo:
case quadro:
case highflow:
/* Special case to support flow sensors */
@@ -857,9 +862,16 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
}
break;
case hwmon_fan_pulses:
- /* Special case for Quadro flow sensor */
- if (priv->kind == quadro && channel == priv->num_fans)
- return 0644;
+ /* Special case for Quadro/Octo flow sensor */
+ if (channel == priv->num_fans) {
+ switch (priv->kind) {
+ case quadro:
+ case octo:
+ return 0644;
+ default:
+ break;
+ }
+ }
break;
case hwmon_fan_min:
case hwmon_fan_max:
@@ -1289,7 +1301,8 @@ static const struct hwmon_channel_info * const aqc_info[] = {
HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_PULSES,
HWMON_F_INPUT | HWMON_F_LABEL,
HWMON_F_INPUT | HWMON_F_LABEL,
- HWMON_F_INPUT | HWMON_F_LABEL),
+ HWMON_F_INPUT | HWMON_F_LABEL,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_PULSES),
HWMON_CHANNEL_INFO(power,
HWMON_P_INPUT | HWMON_P_LABEL,
HWMON_P_INPUT | HWMON_P_LABEL,
@@ -1658,16 +1671,20 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->temp_sensor_start_offset = OCTO_SENSOR_START;
priv->num_virtual_temp_sensors = OCTO_NUM_VIRTUAL_SENSORS;
priv->virtual_temp_sensor_start_offset = OCTO_VIRTUAL_SENSORS_START;
+ priv->num_flow_sensors = OCTO_NUM_FLOW_SENSORS;
+ priv->flow_sensors_start_offset = OCTO_FLOW_SENSOR_OFFSET;
+
priv->temp_ctrl_offset = OCTO_TEMP_CTRL_OFFSET;
priv->buffer_size = OCTO_CTRL_REPORT_SIZE;
priv->ctrl_report_delay = CTRL_REPORT_DELAY;
+ priv->flow_pulses_ctrl_offset = OCTO_FLOW_PULSES_CTRL_OFFSET;
priv->power_cycle_count_offset = OCTO_POWER_CYCLES;
priv->temp_label = label_temp_sensors;
priv->virtual_temp_label = label_virtual_temp_sensors;
- priv->speed_label = label_fan_speed;
+ priv->speed_label = label_octo_speeds;
priv->power_label = label_fan_power;
priv->voltage_label = label_fan_voltage;
priv->current_label = label_fan_current;
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 974521e9b6b4..14e7737866c2 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -213,7 +213,7 @@ static struct asb100_data *asb100_update_device(struct device *dev);
static void asb100_init_client(struct i2c_client *client);
static const struct i2c_device_id asb100_id[] = {
- { "asb100", 0 },
+ { "asb100" },
{ }
};
MODULE_DEVICE_TABLE(i2c, asb100_id);
diff --git a/drivers/hwmon/aspeed-g6-pwm-tach.c b/drivers/hwmon/aspeed-g6-pwm-tach.c
index 597b3b019d49..262d46fed3aa 100644
--- a/drivers/hwmon/aspeed-g6-pwm-tach.c
+++ b/drivers/hwmon/aspeed-g6-pwm-tach.c
@@ -516,13 +516,11 @@ static int aspeed_pwm_tach_probe(struct platform_device *pdev)
return 0;
}
-static int aspeed_pwm_tach_remove(struct platform_device *pdev)
+static void aspeed_pwm_tach_remove(struct platform_device *pdev)
{
struct aspeed_pwm_tach_data *priv = platform_get_drvdata(pdev);
reset_control_assert(priv->reset);
-
- return 0;
}
static const struct of_device_id aspeed_pwm_tach_match[] = {
@@ -535,7 +533,7 @@ MODULE_DEVICE_TABLE(of, aspeed_pwm_tach_match);
static struct platform_driver aspeed_pwm_tach_driver = {
.probe = aspeed_pwm_tach_probe,
- .remove = aspeed_pwm_tach_remove,
+ .remove_new = aspeed_pwm_tach_remove,
.driver = {
.name = "aspeed-g6-pwm-tach",
.of_match_table = aspeed_pwm_tach_match,
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index d1de020abec6..1c7e9a98b757 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -278,7 +278,7 @@ static int atxp1_probe(struct i2c_client *client)
};
static const struct i2c_device_id atxp1_id[] = {
- { "atxp1", 0 },
+ { "atxp1" },
{ }
};
MODULE_DEVICE_TABLE(i2c, atxp1_id);
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 616bd1a5b864..1b9203b20d70 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -411,7 +411,7 @@ static ssize_t show_temp(struct device *dev,
* Return it instead of reporting an error which doesn't
* really help at all.
*/
- tdata->temp = tjmax - ((eax >> 16) & 0x7f) * 1000;
+ tdata->temp = tjmax - ((eax >> 16) & 0xff) * 1000;
tdata->last_updated = jiffies;
}
diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
index efcf78673e74..48a81c64f00d 100644
--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -1215,6 +1215,13 @@ static const struct dmi_system_id i8k_dmi_table[] __initconst = {
},
},
{
+ .ident = "Dell G5 5505",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "G5 5505"),
+ },
+ },
+ {
.ident = "Dell Inspiron",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer"),
@@ -1507,6 +1514,14 @@ static const struct dmi_system_id i8k_whitelist_fan_control[] __initconst = {
.driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3],
},
{
+ .ident = "Dell Precision 7540",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Precision 7540"),
+ },
+ .driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3],
+ },
+ {
.ident = "Dell XPS 13 7390",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c
index 4fc4df012fac..ce397042d90b 100644
--- a/drivers/hwmon/ds620.c
+++ b/drivers/hwmon/ds620.c
@@ -233,7 +233,7 @@ static int ds620_probe(struct i2c_client *client)
}
static const struct i2c_device_id ds620_id[] = {
- {"ds620", 0},
+ {"ds620"},
{}
};
diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
index d370efd6f986..eca33220d34a 100644
--- a/drivers/hwmon/emc1403.c
+++ b/drivers/hwmon/emc1403.c
@@ -19,302 +19,56 @@
#include <linux/sysfs.h>
#include <linux/mutex.h>
#include <linux/regmap.h>
+#include <linux/util_macros.h>
#define THERMAL_PID_REG 0xfd
#define THERMAL_SMSC_ID_REG 0xfe
#define THERMAL_REVISION_REG 0xff
-enum emc1403_chip { emc1402, emc1403, emc1404 };
+enum emc1403_chip { emc1402, emc1403, emc1404, emc1428 };
struct thermal_data {
+ enum emc1403_chip chip;
struct regmap *regmap;
struct mutex mutex;
- const struct attribute_group *groups[4];
};
-static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
- char *buf)
+static ssize_t power_state_show(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
struct thermal_data *data = dev_get_drvdata(dev);
unsigned int val;
int retval;
- retval = regmap_read(data->regmap, sda->index, &val);
+ retval = regmap_read(data->regmap, 0x03, &val);
if (retval < 0)
return retval;
- return sprintf(buf, "%d000\n", val);
+ return sprintf(buf, "%d\n", !!(val & BIT(6)));
}
-static ssize_t bit_show(struct device *dev, struct device_attribute *attr,
- char *buf)
+static ssize_t power_state_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
- struct sensor_device_attribute_2 *sda = to_sensor_dev_attr_2(attr);
- struct thermal_data *data = dev_get_drvdata(dev);
- unsigned int val;
- int retval;
-
- retval = regmap_read(data->regmap, sda->nr, &val);
- if (retval < 0)
- return retval;
- return sprintf(buf, "%d\n", !!(val & sda->index));
-}
-
-static ssize_t temp_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
struct thermal_data *data = dev_get_drvdata(dev);
unsigned long val;
int retval;
if (kstrtoul(buf, 10, &val))
return -EINVAL;
- retval = regmap_write(data->regmap, sda->index,
- DIV_ROUND_CLOSEST(val, 1000));
- if (retval < 0)
- return retval;
- return count;
-}
-static ssize_t bit_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct sensor_device_attribute_2 *sda = to_sensor_dev_attr_2(attr);
- struct thermal_data *data = dev_get_drvdata(dev);
- unsigned long val;
- int retval;
-
- if (kstrtoul(buf, 10, &val))
- return -EINVAL;
-
- retval = regmap_update_bits(data->regmap, sda->nr, sda->index,
- val ? sda->index : 0);
+ retval = regmap_update_bits(data->regmap, 0x03, BIT(6),
+ val ? BIT(6) : 0);
if (retval < 0)
return retval;
return count;
}
-static ssize_t show_hyst_common(struct device *dev,
- struct device_attribute *attr, char *buf,
- bool is_min)
-{
- struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
- struct thermal_data *data = dev_get_drvdata(dev);
- struct regmap *regmap = data->regmap;
- unsigned int limit;
- unsigned int hyst;
- int retval;
-
- retval = regmap_read(regmap, sda->index, &limit);
- if (retval < 0)
- return retval;
-
- retval = regmap_read(regmap, 0x21, &hyst);
- if (retval < 0)
- return retval;
-
- return sprintf(buf, "%d000\n", is_min ? limit + hyst : limit - hyst);
-}
-
-static ssize_t hyst_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- return show_hyst_common(dev, attr, buf, false);
-}
-
-static ssize_t min_hyst_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return show_hyst_common(dev, attr, buf, true);
-}
-
-static ssize_t hyst_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
- struct thermal_data *data = dev_get_drvdata(dev);
- struct regmap *regmap = data->regmap;
- unsigned int limit;
- int retval;
- int hyst;
- unsigned long val;
-
- if (kstrtoul(buf, 10, &val))
- return -EINVAL;
-
- mutex_lock(&data->mutex);
- retval = regmap_read(regmap, sda->index, &limit);
- if (retval < 0)
- goto fail;
-
- hyst = limit * 1000 - val;
- hyst = clamp_val(DIV_ROUND_CLOSEST(hyst, 1000), 0, 255);
- retval = regmap_write(regmap, 0x21, hyst);
- if (retval == 0)
- retval = count;
-fail:
- mutex_unlock(&data->mutex);
- return retval;
-}
-
-/*
- * Sensors. We pass the actual i2c register to the methods.
- */
-
-static SENSOR_DEVICE_ATTR_RW(temp1_min, temp, 0x06);
-static SENSOR_DEVICE_ATTR_RW(temp1_max, temp, 0x05);
-static SENSOR_DEVICE_ATTR_RW(temp1_crit, temp, 0x20);
-static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0x00);
-static SENSOR_DEVICE_ATTR_2_RO(temp1_min_alarm, bit, 0x36, 0x01);
-static SENSOR_DEVICE_ATTR_2_RO(temp1_max_alarm, bit, 0x35, 0x01);
-static SENSOR_DEVICE_ATTR_2_RO(temp1_crit_alarm, bit, 0x37, 0x01);
-static SENSOR_DEVICE_ATTR_RO(temp1_min_hyst, min_hyst, 0x06);
-static SENSOR_DEVICE_ATTR_RO(temp1_max_hyst, hyst, 0x05);
-static SENSOR_DEVICE_ATTR_RW(temp1_crit_hyst, hyst, 0x20);
-
-static SENSOR_DEVICE_ATTR_RW(temp2_min, temp, 0x08);
-static SENSOR_DEVICE_ATTR_RW(temp2_max, temp, 0x07);
-static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp, 0x19);
-static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 0x01);
-static SENSOR_DEVICE_ATTR_2_RO(temp2_fault, bit, 0x1b, 0x02);
-static SENSOR_DEVICE_ATTR_2_RO(temp2_min_alarm, bit, 0x36, 0x02);
-static SENSOR_DEVICE_ATTR_2_RO(temp2_max_alarm, bit, 0x35, 0x02);
-static SENSOR_DEVICE_ATTR_2_RO(temp2_crit_alarm, bit, 0x37, 0x02);
-static SENSOR_DEVICE_ATTR_RO(temp2_min_hyst, min_hyst, 0x08);
-static SENSOR_DEVICE_ATTR_RO(temp2_max_hyst, hyst, 0x07);
-static SENSOR_DEVICE_ATTR_RO(temp2_crit_hyst, hyst, 0x19);
-
-static SENSOR_DEVICE_ATTR_RW(temp3_min, temp, 0x16);
-static SENSOR_DEVICE_ATTR_RW(temp3_max, temp, 0x15);
-static SENSOR_DEVICE_ATTR_RW(temp3_crit, temp, 0x1A);
-static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 0x23);
-static SENSOR_DEVICE_ATTR_2_RO(temp3_fault, bit, 0x1b, 0x04);
-static SENSOR_DEVICE_ATTR_2_RO(temp3_min_alarm, bit, 0x36, 0x04);
-static SENSOR_DEVICE_ATTR_2_RO(temp3_max_alarm, bit, 0x35, 0x04);
-static SENSOR_DEVICE_ATTR_2_RO(temp3_crit_alarm, bit, 0x37, 0x04);
-static SENSOR_DEVICE_ATTR_RO(temp3_min_hyst, min_hyst, 0x16);
-static SENSOR_DEVICE_ATTR_RO(temp3_max_hyst, hyst, 0x15);
-static SENSOR_DEVICE_ATTR_RO(temp3_crit_hyst, hyst, 0x1A);
-
-static SENSOR_DEVICE_ATTR_RW(temp4_min, temp, 0x2D);
-static SENSOR_DEVICE_ATTR_RW(temp4_max, temp, 0x2C);
-static SENSOR_DEVICE_ATTR_RW(temp4_crit, temp, 0x30);
-static SENSOR_DEVICE_ATTR_RO(temp4_input, temp, 0x2A);
-static SENSOR_DEVICE_ATTR_2_RO(temp4_fault, bit, 0x1b, 0x08);
-static SENSOR_DEVICE_ATTR_2_RO(temp4_min_alarm, bit, 0x36, 0x08);
-static SENSOR_DEVICE_ATTR_2_RO(temp4_max_alarm, bit, 0x35, 0x08);
-static SENSOR_DEVICE_ATTR_2_RO(temp4_crit_alarm, bit, 0x37, 0x08);
-static SENSOR_DEVICE_ATTR_RO(temp4_min_hyst, min_hyst, 0x2D);
-static SENSOR_DEVICE_ATTR_RO(temp4_max_hyst, hyst, 0x2C);
-static SENSOR_DEVICE_ATTR_RO(temp4_crit_hyst, hyst, 0x30);
-
-static SENSOR_DEVICE_ATTR_2_RW(power_state, bit, 0x03, 0x40);
-
-static struct attribute *emc1402_attrs[] = {
- &sensor_dev_attr_temp1_min.dev_attr.attr,
- &sensor_dev_attr_temp1_max.dev_attr.attr,
- &sensor_dev_attr_temp1_crit.dev_attr.attr,
- &sensor_dev_attr_temp1_input.dev_attr.attr,
- &sensor_dev_attr_temp1_min_hyst.dev_attr.attr,
- &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
- &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
-
- &sensor_dev_attr_temp2_min.dev_attr.attr,
- &sensor_dev_attr_temp2_max.dev_attr.attr,
- &sensor_dev_attr_temp2_crit.dev_attr.attr,
- &sensor_dev_attr_temp2_input.dev_attr.attr,
- &sensor_dev_attr_temp2_min_hyst.dev_attr.attr,
- &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
- &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
-
- &sensor_dev_attr_power_state.dev_attr.attr,
- NULL
-};
-
-static const struct attribute_group emc1402_group = {
- .attrs = emc1402_attrs,
-};
+static DEVICE_ATTR_RW(power_state);
static struct attribute *emc1403_attrs[] = {
- &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
- &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
- &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
-
- &sensor_dev_attr_temp2_fault.dev_attr.attr,
- &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
- &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
- &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
-
- &sensor_dev_attr_temp3_min.dev_attr.attr,
- &sensor_dev_attr_temp3_max.dev_attr.attr,
- &sensor_dev_attr_temp3_crit.dev_attr.attr,
- &sensor_dev_attr_temp3_input.dev_attr.attr,
- &sensor_dev_attr_temp3_fault.dev_attr.attr,
- &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
- &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
- &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
- &sensor_dev_attr_temp3_min_hyst.dev_attr.attr,
- &sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
- &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
- NULL
-};
-
-static const struct attribute_group emc1403_group = {
- .attrs = emc1403_attrs,
-};
-
-static struct attribute *emc1404_attrs[] = {
- &sensor_dev_attr_temp4_min.dev_attr.attr,
- &sensor_dev_attr_temp4_max.dev_attr.attr,
- &sensor_dev_attr_temp4_crit.dev_attr.attr,
- &sensor_dev_attr_temp4_input.dev_attr.attr,
- &sensor_dev_attr_temp4_fault.dev_attr.attr,
- &sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
- &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
- &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
- &sensor_dev_attr_temp4_min_hyst.dev_attr.attr,
- &sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
- &sensor_dev_attr_temp4_crit_hyst.dev_attr.attr,
+ &dev_attr_power_state.attr,
NULL
};
-
-static const struct attribute_group emc1404_group = {
- .attrs = emc1404_attrs,
-};
-
-/*
- * EMC14x2 uses a different register and different bits to report alarm and
- * fault status. For simplicity, provide a separate attribute group for this
- * chip series.
- * Since we can not re-use the same attribute names, create a separate attribute
- * array.
- */
-static struct sensor_device_attribute_2 emc1402_alarms[] = {
- SENSOR_ATTR_2_RO(temp1_min_alarm, bit, 0x02, 0x20),
- SENSOR_ATTR_2_RO(temp1_max_alarm, bit, 0x02, 0x40),
- SENSOR_ATTR_2_RO(temp1_crit_alarm, bit, 0x02, 0x01),
-
- SENSOR_ATTR_2_RO(temp2_fault, bit, 0x02, 0x04),
- SENSOR_ATTR_2_RO(temp2_min_alarm, bit, 0x02, 0x08),
- SENSOR_ATTR_2_RO(temp2_max_alarm, bit, 0x02, 0x10),
- SENSOR_ATTR_2_RO(temp2_crit_alarm, bit, 0x02, 0x02),
-};
-
-static struct attribute *emc1402_alarm_attrs[] = {
- &emc1402_alarms[0].dev_attr.attr,
- &emc1402_alarms[1].dev_attr.attr,
- &emc1402_alarms[2].dev_attr.attr,
- &emc1402_alarms[3].dev_attr.attr,
- &emc1402_alarms[4].dev_attr.attr,
- &emc1402_alarms[5].dev_attr.attr,
- &emc1402_alarms[6].dev_attr.attr,
- NULL,
-};
-
-static const struct attribute_group emc1402_alarm_group = {
- .attrs = emc1402_alarm_attrs,
-};
+ATTRIBUTE_GROUPS(emc1403);
static int emc1403_detect(struct i2c_client *client,
struct i2c_board_info *info)
@@ -346,6 +100,12 @@ static int emc1403_detect(struct i2c_client *client,
case 0x27:
strscpy(info->type, "emc1424", I2C_NAME_SIZE);
break;
+ case 0x29:
+ strscpy(info->type, "emc1428", I2C_NAME_SIZE);
+ break;
+ case 0x59:
+ strscpy(info->type, "emc1438", I2C_NAME_SIZE);
+ break;
case 0x60:
strscpy(info->type, "emc1442", I2C_NAME_SIZE);
break;
@@ -376,6 +136,14 @@ static bool emc1403_regmap_is_volatile(struct device *dev, unsigned int reg)
case 0x35: /* high limit status */
case 0x36: /* low limit status */
case 0x37: /* therm limit status */
+ case 0x41: /* external diode 4 high byte */
+ case 0x42: /* external diode 4 low byte */
+ case 0x43: /* external diode 5 high byte */
+ case 0x44: /* external diode 5 low byte */
+ case 0x45: /* external diode 6 high byte */
+ case 0x46: /* external diode 6 low byte */
+ case 0x47: /* external diode 7 high byte */
+ case 0x48: /* external diode 7 low byte */
return true;
default:
return false;
@@ -389,51 +157,508 @@ static const struct regmap_config emc1403_regmap_config = {
.volatile_reg = emc1403_regmap_is_volatile,
};
-static const struct i2c_device_id emc1403_idtable[];
+enum emc1403_reg_map {temp_min, temp_max, temp_crit, temp_input};
-static int emc1403_probe(struct i2c_client *client)
+static u8 ema1403_temp_map[] = {
+ [hwmon_temp_min] = temp_min,
+ [hwmon_temp_max] = temp_max,
+ [hwmon_temp_crit] = temp_crit,
+ [hwmon_temp_input] = temp_input,
+};
+
+static u8 emc1403_temp_regs[][4] = {
+ [0] = {
+ [temp_min] = 0x06,
+ [temp_max] = 0x05,
+ [temp_crit] = 0x20,
+ [temp_input] = 0x00,
+ },
+ [1] = {
+ [temp_min] = 0x08,
+ [temp_max] = 0x07,
+ [temp_crit] = 0x19,
+ [temp_input] = 0x01,
+ },
+ [2] = {
+ [temp_min] = 0x16,
+ [temp_max] = 0x15,
+ [temp_crit] = 0x1a,
+ [temp_input] = 0x23,
+ },
+ [3] = {
+ [temp_min] = 0x2d,
+ [temp_max] = 0x2c,
+ [temp_crit] = 0x30,
+ [temp_input] = 0x2a,
+ },
+ [4] = {
+ [temp_min] = 0x51,
+ [temp_max] = 0x50,
+ [temp_crit] = 0x64,
+ [temp_input] = 0x41,
+ },
+ [5] = {
+ [temp_min] = 0x55,
+ [temp_max] = 0x54,
+ [temp_crit] = 0x65,
+ [temp_input] = 0x43
+ },
+ [6] = {
+ [temp_min] = 0x59,
+ [temp_max] = 0x58,
+ [temp_crit] = 0x66,
+ [temp_input] = 0x45,
+ },
+ [7] = {
+ [temp_min] = 0x5d,
+ [temp_max] = 0x5c,
+ [temp_crit] = 0x67,
+ [temp_input] = 0x47,
+ },
+};
+
+static s8 emc1403_temp_regs_low[][4] = {
+ [0] = {
+ [temp_min] = -1,
+ [temp_max] = -1,
+ [temp_crit] = -1,
+ [temp_input] = 0x29,
+ },
+ [1] = {
+ [temp_min] = 0x14,
+ [temp_max] = 0x13,
+ [temp_crit] = -1,
+ [temp_input] = 0x10,
+ },
+ [2] = {
+ [temp_min] = 0x18,
+ [temp_max] = 0x17,
+ [temp_crit] = -1,
+ [temp_input] = 0x24,
+ },
+ [3] = {
+ [temp_min] = 0x2f,
+ [temp_max] = 0x2e,
+ [temp_crit] = -1,
+ [temp_input] = 0x2b,
+ },
+ [4] = {
+ [temp_min] = 0x53,
+ [temp_max] = 0x52,
+ [temp_crit] = -1,
+ [temp_input] = 0x42,
+ },
+ [5] = {
+ [temp_min] = 0x57,
+ [temp_max] = 0x56,
+ [temp_crit] = -1,
+ [temp_input] = 0x44,
+ },
+ [6] = {
+ [temp_min] = 0x5b,
+ [temp_max] = 0x5a,
+ [temp_crit] = -1,
+ [temp_input] = 0x46,
+ },
+ [7] = {
+ [temp_min] = 0x5f,
+ [temp_max] = 0x5e,
+ [temp_crit] = -1,
+ [temp_input] = 0x48,
+ },
+};
+
+static int __emc1403_get_temp(struct thermal_data *data, int channel,
+ enum emc1403_reg_map map, long *val)
{
- struct thermal_data *data;
- struct device *hwmon_dev;
- const struct i2c_device_id *id = i2c_match_id(emc1403_idtable, client);
+ unsigned int regvalh;
+ unsigned int regvall = 0;
+ int ret;
+ s8 reg;
+
+ ret = regmap_read(data->regmap, emc1403_temp_regs[channel][map], &regvalh);
+ if (ret < 0)
+ return ret;
+
+ reg = emc1403_temp_regs_low[channel][map];
+ if (reg >= 0) {
+ ret = regmap_read(data->regmap, reg, &regvall);
+ if (ret < 0)
+ return ret;
+ }
- data = devm_kzalloc(&client->dev, sizeof(struct thermal_data),
- GFP_KERNEL);
- if (data == NULL)
- return -ENOMEM;
+ if (data->chip == emc1428)
+ *val = sign_extend32((regvalh << 3) | (regvall >> 5), 10) * 125;
+ else
+ *val = ((regvalh << 3) | (regvall >> 5)) * 125;
- data->regmap = devm_regmap_init_i2c(client, &emc1403_regmap_config);
- if (IS_ERR(data->regmap))
- return PTR_ERR(data->regmap);
+ return 0;
+}
- mutex_init(&data->mutex);
+static int emc1403_get_temp(struct thermal_data *data, int channel,
+ enum emc1403_reg_map map, long *val)
+{
+ int ret;
+
+ mutex_lock(&data->mutex);
+ ret = __emc1403_get_temp(data, channel, map, val);
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static int emc1403_get_hyst(struct thermal_data *data, int channel,
+ enum emc1403_reg_map map, long *val)
+{
+ int hyst, ret;
+ long limit;
- switch (id->driver_data) {
- case emc1404:
- data->groups[2] = &emc1404_group;
- fallthrough;
- case emc1403:
- data->groups[1] = &emc1403_group;
- fallthrough;
- case emc1402:
- data->groups[0] = &emc1402_group;
+ mutex_lock(&data->mutex);
+ ret = __emc1403_get_temp(data, channel, map, &limit);
+ if (ret < 0)
+ goto unlock;
+ ret = regmap_read(data->regmap, 0x21, &hyst);
+ if (ret < 0)
+ goto unlock;
+ if (map == temp_min)
+ *val = limit + hyst * 1000;
+ else
+ *val = limit - hyst * 1000;
+unlock:
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static int emc1403_temp_read(struct thermal_data *data, u32 attr, int channel, long *val)
+{
+ unsigned int regval;
+ int ret;
+
+ switch (attr) {
+ case hwmon_temp_min:
+ case hwmon_temp_max:
+ case hwmon_temp_crit:
+ case hwmon_temp_input:
+ ret = emc1403_get_temp(data, channel, ema1403_temp_map[attr], val);
+ break;
+ case hwmon_temp_min_hyst:
+ ret = emc1403_get_hyst(data, channel, temp_min, val);
+ break;
+ case hwmon_temp_max_hyst:
+ ret = emc1403_get_hyst(data, channel, temp_max, val);
+ break;
+ case hwmon_temp_crit_hyst:
+ ret = emc1403_get_hyst(data, channel, temp_crit, val);
+ break;
+ case hwmon_temp_min_alarm:
+ if (data->chip == emc1402) {
+ ret = regmap_read(data->regmap, 0x02, &regval);
+ if (ret < 0)
+ break;
+ *val = !!(regval & BIT(5 - 2 * channel));
+ } else {
+ ret = regmap_read(data->regmap, 0x36, &regval);
+ if (ret < 0)
+ break;
+ *val = !!(regval & BIT(channel));
+ }
+ break;
+ case hwmon_temp_max_alarm:
+ if (data->chip == emc1402) {
+ ret = regmap_read(data->regmap, 0x02, &regval);
+ if (ret < 0)
+ break;
+ *val = !!(regval & BIT(6 - 2 * channel));
+ } else {
+ ret = regmap_read(data->regmap, 0x35, &regval);
+ if (ret < 0)
+ break;
+ *val = !!(regval & BIT(channel));
+ }
+ break;
+ case hwmon_temp_crit_alarm:
+ if (data->chip == emc1402) {
+ ret = regmap_read(data->regmap, 0x02, &regval);
+ if (ret < 0)
+ break;
+ *val = !!(regval & BIT(channel));
+ } else {
+ ret = regmap_read(data->regmap, 0x37, &regval);
+ if (ret < 0)
+ break;
+ *val = !!(regval & BIT(channel));
+ }
+ break;
+ case hwmon_temp_fault:
+ ret = regmap_read(data->regmap, 0x1b, &regval);
+ if (ret < 0)
+ break;
+ *val = !!(regval & BIT(channel));
+ break;
+ default:
+ return -EOPNOTSUPP;
}
+ return ret;
+}
- if (id->driver_data == emc1402)
- data->groups[1] = &emc1402_alarm_group;
+static int emc1403_get_convrate(struct thermal_data *data, long *val)
+{
+ unsigned int convrate;
+ int ret;
- hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev,
- client->name, data,
- data->groups);
- if (IS_ERR(hwmon_dev))
- return PTR_ERR(hwmon_dev);
+ ret = regmap_read(data->regmap, 0x04, &convrate);
+ if (ret < 0)
+ return ret;
+ if (convrate > 10)
+ convrate = 4;
- dev_info(&client->dev, "%s Thermal chip found\n", id->name);
+ *val = 16000 >> convrate;
return 0;
}
-static const unsigned short emc1403_address_list[] = {
- 0x18, 0x1c, 0x29, 0x3c, 0x4c, 0x4d, 0x5c, I2C_CLIENT_END
+static int emc1403_chip_read(struct thermal_data *data, u32 attr, long *val)
+{
+ switch (attr) {
+ case hwmon_chip_update_interval:
+ return emc1403_get_convrate(data, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int emc1403_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct thermal_data *data = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_temp:
+ return emc1403_temp_read(data, attr, channel, val);
+ case hwmon_chip:
+ return emc1403_chip_read(data, attr, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int emc1403_set_hyst(struct thermal_data *data, long val)
+{
+ int hyst, ret;
+ long limit;
+
+ if (data->chip == emc1428)
+ val = clamp_val(val, -128000, 127000);
+ else
+ val = clamp_val(val, 0, 255000);
+
+ mutex_lock(&data->mutex);
+ ret = __emc1403_get_temp(data, 0, temp_crit, &limit);
+ if (ret < 0)
+ goto unlock;
+
+ hyst = limit - val;
+ if (data->chip == emc1428)
+ hyst = clamp_val(DIV_ROUND_CLOSEST(hyst, 1000), 0, 127);
+ else
+ hyst = clamp_val(DIV_ROUND_CLOSEST(hyst, 1000), 0, 255);
+ ret = regmap_write(data->regmap, 0x21, hyst);
+unlock:
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static int emc1403_set_temp(struct thermal_data *data, int channel,
+ enum emc1403_reg_map map, long val)
+{
+ unsigned int regval;
+ int ret;
+ u8 regh;
+ s8 regl;
+
+ regh = emc1403_temp_regs[channel][map];
+ regl = emc1403_temp_regs_low[channel][map];
+
+ mutex_lock(&data->mutex);
+ if (regl >= 0) {
+ if (data->chip == emc1428)
+ val = clamp_val(val, -128000, 127875);
+ else
+ val = clamp_val(val, 0, 255875);
+ regval = DIV_ROUND_CLOSEST(val, 125);
+ ret = regmap_write(data->regmap, regh, (regval >> 3) & 0xff);
+ if (ret < 0)
+ goto unlock;
+ ret = regmap_write(data->regmap, regl, (regval & 0x07) << 5);
+ } else {
+ if (data->chip == emc1428)
+ val = clamp_val(val, -128000, 127000);
+ else
+ val = clamp_val(val, 0, 255000);
+ regval = DIV_ROUND_CLOSEST(val, 1000);
+ ret = regmap_write(data->regmap, regh, regval);
+ }
+unlock:
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static int emc1403_temp_write(struct thermal_data *data, u32 attr, int channel, long val)
+{
+ switch (attr) {
+ case hwmon_temp_min:
+ case hwmon_temp_max:
+ case hwmon_temp_crit:
+ return emc1403_set_temp(data, channel, ema1403_temp_map[attr], val);
+ case hwmon_temp_crit_hyst:
+ return emc1403_set_hyst(data, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/* Lookup table for temperature conversion times in msec */
+static const u16 ina3221_conv_time[] = {
+ 16000, 8000, 4000, 2000, 1000, 500, 250, 125, 62, 31, 16
+};
+
+static int emc1403_set_convrate(struct thermal_data *data, unsigned int interval)
+{
+ int convrate;
+
+ convrate = find_closest_descending(interval, ina3221_conv_time,
+ ARRAY_SIZE(ina3221_conv_time));
+ return regmap_write(data->regmap, 0x04, convrate);
+}
+
+static int emc1403_chip_write(struct thermal_data *data, u32 attr, long val)
+{
+ switch (attr) {
+ case hwmon_chip_update_interval:
+ return emc1403_set_convrate(data, clamp_val(val, 0, 100000));
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int emc1403_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ struct thermal_data *data = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_temp:
+ return emc1403_temp_write(data, attr, channel, val);
+ case hwmon_chip:
+ return emc1403_chip_write(data, attr, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t emc1403_temp_is_visible(const void *_data, u32 attr, int channel)
+{
+ const struct thermal_data *data = _data;
+
+ if (data->chip == emc1402 && channel > 1)
+ return 0;
+ if (data->chip == emc1403 && channel > 2)
+ return 0;
+ if (data->chip != emc1428 && channel > 3)
+ return 0;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ case hwmon_temp_min_alarm:
+ case hwmon_temp_max_alarm:
+ case hwmon_temp_crit_alarm:
+ case hwmon_temp_fault:
+ case hwmon_temp_min_hyst:
+ case hwmon_temp_max_hyst:
+ return 0444;
+ case hwmon_temp_min:
+ case hwmon_temp_max:
+ case hwmon_temp_crit:
+ return 0644;
+ case hwmon_temp_crit_hyst:
+ if (channel == 0)
+ return 0644;
+ return 0444;
+ default:
+ return 0;
+ }
+}
+
+static umode_t emc1403_chip_is_visible(const void *_data, u32 attr)
+{
+ switch (attr) {
+ case hwmon_chip_update_interval:
+ return 0644;
+ default:
+ return 0;
+ }
+}
+
+static umode_t emc1403_is_visible(const void *data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (type) {
+ case hwmon_temp:
+ return emc1403_temp_is_visible(data, attr, channel);
+ case hwmon_chip:
+ return emc1403_chip_is_visible(data, attr);
+ default:
+ return 0;
+ }
+}
+
+static const struct hwmon_channel_info * const emc1403_info[] = {
+ HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL),
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_CRIT | HWMON_T_MIN_HYST | HWMON_T_MAX_HYST |
+ HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
+ HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_CRIT | HWMON_T_MIN_HYST | HWMON_T_MAX_HYST |
+ HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
+ HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_CRIT | HWMON_T_MIN_HYST | HWMON_T_MAX_HYST |
+ HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
+ HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_CRIT | HWMON_T_MIN_HYST | HWMON_T_MAX_HYST |
+ HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
+ HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_CRIT | HWMON_T_MIN_HYST | HWMON_T_MAX_HYST |
+ HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
+ HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_CRIT | HWMON_T_MIN_HYST | HWMON_T_MAX_HYST |
+ HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
+ HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_CRIT | HWMON_T_MIN_HYST | HWMON_T_MAX_HYST |
+ HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
+ HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_CRIT | HWMON_T_MIN_HYST | HWMON_T_MAX_HYST |
+ HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
+ HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT
+ ),
+ NULL
+};
+
+static const struct hwmon_ops emc1403_hwmon_ops = {
+ .is_visible = emc1403_is_visible,
+ .read = emc1403_read,
+ .write = emc1403_write,
+};
+
+static const struct hwmon_chip_info emc1403_chip_info = {
+ .ops = &emc1403_hwmon_ops,
+ .info = emc1403_info,
};
/* Last digit of chip name indicates number of channels */
@@ -447,11 +672,42 @@ static const struct i2c_device_id emc1403_idtable[] = {
{ "emc1422", emc1402 },
{ "emc1423", emc1403 },
{ "emc1424", emc1404 },
+ { "emc1428", emc1428 },
+ { "emc1438", emc1428 },
{ "emc1442", emc1402 },
{ }
};
MODULE_DEVICE_TABLE(i2c, emc1403_idtable);
+static int emc1403_probe(struct i2c_client *client)
+{
+ struct thermal_data *data;
+ struct device *hwmon_dev;
+ const struct i2c_device_id *id = i2c_match_id(emc1403_idtable, client);
+
+ data = devm_kzalloc(&client->dev, sizeof(struct thermal_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->chip = id->driver_data;
+ data->regmap = devm_regmap_init_i2c(client, &emc1403_regmap_config);
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
+ mutex_init(&data->mutex);
+
+ hwmon_dev = devm_hwmon_device_register_with_info(&client->dev,
+ client->name, data,
+ &emc1403_chip_info,
+ emc1403_groups);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const unsigned short emc1403_address_list[] = {
+ 0x18, 0x1c, 0x29, 0x3c, 0x4c, 0x4d, 0x5c, I2C_CLIENT_END
+};
+
static struct i2c_driver sensor_emc1403 = {
.class = I2C_CLASS_HWMON,
.driver = {
diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
index b59472bbe5bf..60eddc7b0270 100644
--- a/drivers/hwmon/emc2103.c
+++ b/drivers/hwmon/emc2103.c
@@ -620,7 +620,7 @@ emc2103_probe(struct i2c_client *client)
}
static const struct i2c_device_id emc2103_ids[] = {
- { "emc2103", 0, },
+ { "emc2103" },
{ /* LIST END */ }
};
MODULE_DEVICE_TABLE(i2c, emc2103_ids);
diff --git a/drivers/hwmon/emc2305.c b/drivers/hwmon/emc2305.c
index 6ef733c0be16..4d39fbd83769 100644
--- a/drivers/hwmon/emc2305.c
+++ b/drivers/hwmon/emc2305.c
@@ -47,10 +47,10 @@ enum emc230x_product_id {
};
static const struct i2c_device_id emc2305_ids[] = {
- { "emc2305", 0 },
- { "emc2303", 0 },
- { "emc2302", 0 },
- { "emc2301", 0 },
+ { "emc2305" },
+ { "emc2303" },
+ { "emc2302" },
+ { "emc2301" },
{ }
};
MODULE_DEVICE_TABLE(i2c, emc2305_ids);
diff --git a/drivers/hwmon/emc6w201.c b/drivers/hwmon/emc6w201.c
index 9a4f868bf1e6..1100c6e5daa7 100644
--- a/drivers/hwmon/emc6w201.c
+++ b/drivers/hwmon/emc6w201.c
@@ -464,7 +464,7 @@ static int emc6w201_probe(struct i2c_client *client)
}
static const struct i2c_device_id emc6w201_id[] = {
- { "emc6w201", 0 },
+ { "emc6w201" },
{ }
};
MODULE_DEVICE_TABLE(i2c, emc6w201_id);
diff --git a/drivers/hwmon/ftsteutates.c b/drivers/hwmon/ftsteutates.c
index b74a2665e733..a3a07662e491 100644
--- a/drivers/hwmon/ftsteutates.c
+++ b/drivers/hwmon/ftsteutates.c
@@ -50,7 +50,7 @@
static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
static const struct i2c_device_id fts_id[] = {
- { "ftsteutates", 0 },
+ { "ftsteutates" },
{ }
};
MODULE_DEVICE_TABLE(i2c, fts_id);
diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c
index b5edee00267b..39ae8f826417 100644
--- a/drivers/hwmon/g760a.c
+++ b/drivers/hwmon/g760a.c
@@ -197,7 +197,7 @@ static int g760a_probe(struct i2c_client *client)
}
static const struct i2c_device_id g760a_id[] = {
- { "g760a", 0 },
+ { "g760a" },
{ }
};
MODULE_DEVICE_TABLE(i2c, g760a_id);
diff --git a/drivers/hwmon/g762.c b/drivers/hwmon/g762.c
index fad69ef56c75..af1228708e25 100644
--- a/drivers/hwmon/g762.c
+++ b/drivers/hwmon/g762.c
@@ -44,8 +44,8 @@
#define DRVNAME "g762"
static const struct i2c_device_id g762_id[] = {
- { "g762", 0 },
- { "g763", 0 },
+ { "g762" },
+ { "g763" },
{ }
};
MODULE_DEVICE_TABLE(i2c, g762_id);
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 03db6158b13a..9c68bc013950 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -642,7 +642,7 @@ static int gl518_probe(struct i2c_client *client)
}
static const struct i2c_device_id gl518_id[] = {
- { "gl518sm", 0 },
+ { "gl518sm" },
{ }
};
MODULE_DEVICE_TABLE(i2c, gl518_id);
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index 8bbc6a4f2928..972f4f8caa2b 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -885,7 +885,7 @@ static int gl520_probe(struct i2c_client *client)
}
static const struct i2c_device_id gl520_id[] = {
- { "gl520sm", 0 },
+ { "gl520sm" },
{ }
};
MODULE_DEVICE_TABLE(i2c, gl520_id);
diff --git a/drivers/hwmon/hih6130.c b/drivers/hwmon/hih6130.c
index a9726b5370fb..85af8299150a 100644
--- a/drivers/hwmon/hih6130.c
+++ b/drivers/hwmon/hih6130.c
@@ -233,7 +233,7 @@ static int hih6130_probe(struct i2c_client *client)
/* Device ID table */
static const struct i2c_device_id hih6130_id[] = {
- { "hih6130", 0 },
+ { "hih6130" },
{ }
};
MODULE_DEVICE_TABLE(i2c, hih6130_id);
diff --git a/drivers/hwmon/hs3001.c b/drivers/hwmon/hs3001.c
index 01ea9a3062bc..24ed3fb9a43a 100644
--- a/drivers/hwmon/hs3001.c
+++ b/drivers/hwmon/hs3001.c
@@ -175,7 +175,7 @@ static const struct hwmon_chip_info hs3001_chip_info = {
/* device ID table */
static const struct i2c_device_id hs3001_ids[] = {
- { "hs3001", 0 },
+ { "hs3001" },
{ },
};
diff --git a/drivers/hwmon/ina209.c b/drivers/hwmon/ina209.c
index d9b57a4b3e41..bd7b3380d847 100644
--- a/drivers/hwmon/ina209.c
+++ b/drivers/hwmon/ina209.c
@@ -576,7 +576,7 @@ static void ina209_remove(struct i2c_client *client)
}
static const struct i2c_device_id ina209_id[] = {
- { "ina209", 0 },
+ { "ina209" },
{ }
};
MODULE_DEVICE_TABLE(i2c, ina209_id);
diff --git a/drivers/hwmon/ina238.c b/drivers/hwmon/ina238.c
index 69289293bc38..855626f1bc01 100644
--- a/drivers/hwmon/ina238.c
+++ b/drivers/hwmon/ina238.c
@@ -616,7 +616,7 @@ static int ina238_probe(struct i2c_client *client)
}
static const struct i2c_device_id ina238_id[] = {
- { "ina238", 0 },
+ { "ina238" },
{ }
};
MODULE_DEVICE_TABLE(i2c, ina238_id);
diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c
index 2c9530b6f192..f0053f87e3e6 100644
--- a/drivers/hwmon/ina3221.c
+++ b/drivers/hwmon/ina3221.c
@@ -1031,7 +1031,7 @@ static const struct of_device_id ina3221_of_match_table[] = {
MODULE_DEVICE_TABLE(of, ina3221_of_match_table);
static const struct i2c_device_id ina3221_ids[] = {
- { "ina3221", 0 },
+ { "ina3221" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(i2c, ina3221_ids);
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index fbe86cec6055..e233aafa8856 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -117,7 +117,7 @@ static inline void superio_select(int ioreg, int ldn)
outb(ldn, ioreg + 1);
}
-static inline int superio_enter(int ioreg)
+static inline int superio_enter(int ioreg, bool noentry)
{
/*
* Try to reserve ioreg and ioreg + 1 for exclusive access.
@@ -125,7 +125,8 @@ static inline int superio_enter(int ioreg)
if (!request_muxed_region(ioreg, 2, DRVNAME))
return -EBUSY;
- __superio_enter(ioreg);
+ if (!noentry)
+ __superio_enter(ioreg);
return 0;
}
@@ -320,7 +321,7 @@ struct it87_devices {
* second SIO address. Never exit configuration mode on these
* chips to avoid the problem.
*/
-#define FEAT_CONF_NOEXIT BIT(19) /* Chip should not exit conf mode */
+#define FEAT_NOCONF BIT(19) /* Chip conf mode enabled on startup */
#define FEAT_FOUR_FANS BIT(20) /* Supports four fans */
#define FEAT_FOUR_PWM BIT(21) /* Supports four fan controls */
#define FEAT_FOUR_TEMP BIT(22)
@@ -452,7 +453,7 @@ static const struct it87_devices it87_devices[] = {
.model = "IT8790E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
- | FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF | FEAT_CONF_NOEXIT,
+ | FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF | FEAT_NOCONF,
.peci_mask = 0x07,
},
[it8792] = {
@@ -461,7 +462,7 @@ static const struct it87_devices it87_devices[] = {
.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
| FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FANCTL_ONOFF
- | FEAT_CONF_NOEXIT,
+ | FEAT_NOCONF,
.peci_mask = 0x07,
.old_peci_mask = 0x02, /* Actually reports PCH */
},
@@ -507,7 +508,7 @@ static const struct it87_devices it87_devices[] = {
.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
| FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FANCTL_ONOFF
- | FEAT_CONF_NOEXIT,
+ | FEAT_NOCONF,
.peci_mask = 0x07,
.old_peci_mask = 0x02, /* Actually reports PCH */
},
@@ -544,7 +545,7 @@ static const struct it87_devices it87_devices[] = {
#define has_four_temp(data) ((data)->features & FEAT_FOUR_TEMP)
#define has_six_temp(data) ((data)->features & FEAT_SIX_TEMP)
#define has_vin3_5v(data) ((data)->features & FEAT_VIN3_5V)
-#define has_conf_noexit(data) ((data)->features & FEAT_CONF_NOEXIT)
+#define has_noconf(data) ((data)->features & FEAT_NOCONF)
#define has_scaling(data) ((data)->features & (FEAT_12MV_ADC | \
FEAT_10_9MV_ADC))
#define has_fanctl_onoff(data) ((data)->features & FEAT_FANCTL_ONOFF)
@@ -742,13 +743,13 @@ static int smbus_disable(struct it87_data *data)
int err;
if (data->smbus_bitmap) {
- err = superio_enter(data->sioaddr);
+ err = superio_enter(data->sioaddr, has_noconf(data));
if (err)
return err;
superio_select(data->sioaddr, PME);
superio_outb(data->sioaddr, IT87_SPECIAL_CFG_REG,
data->ec_special_config & ~data->smbus_bitmap);
- superio_exit(data->sioaddr, has_conf_noexit(data));
+ superio_exit(data->sioaddr, has_noconf(data));
}
return 0;
}
@@ -758,14 +759,14 @@ static int smbus_enable(struct it87_data *data)
int err;
if (data->smbus_bitmap) {
- err = superio_enter(data->sioaddr);
+ err = superio_enter(data->sioaddr, has_noconf(data));
if (err)
return err;
superio_select(data->sioaddr, PME);
superio_outb(data->sioaddr, IT87_SPECIAL_CFG_REG,
data->ec_special_config);
- superio_exit(data->sioaddr, has_conf_noexit(data));
+ superio_exit(data->sioaddr, has_noconf(data));
}
return 0;
}
@@ -2666,6 +2667,27 @@ static const struct attribute_group it87_group_auto_pwm = {
.is_visible = it87_auto_pwm_is_visible,
};
+/*
+ * Original explanation:
+ * On various Gigabyte AM4 boards (AB350, AX370), the second Super-IO chip
+ * (IT8792E) needs to be in configuration mode before accessing the first
+ * due to a bug in IT8792E which otherwise results in LPC bus access errors.
+ * This needs to be done before accessing the first Super-IO chip since
+ * the second chip may have been accessed prior to loading this driver.
+ *
+ * The problem is also reported to affect IT8795E, which is used on X299 boards
+ * and has the same chip ID as IT8792E (0x8733). It also appears to affect
+ * systems with IT8790E, which is used on some Z97X-Gaming boards as well as
+ * Z87X-OC.
+ *
+ * From other information supplied:
+ * ChipIDs 0x8733, 0x8695 (early ID for IT87952E) and 0x8790 are initialized
+ * and left in configuration mode, and entering and/or exiting configuration
+ * mode is what causes the crash.
+ *
+ * The recommendation is to look up the chipID before doing any mode swap
+ * and then act accordingly.
+ */
/* SuperIO detection - will change isa_address if a chip is found */
static int __init it87_find(int sioaddr, unsigned short *address,
struct it87_sio_data *sio_data, int chip_cnt)
@@ -2673,16 +2695,25 @@ static int __init it87_find(int sioaddr, unsigned short *address,
int err;
u16 chip_type;
const struct it87_devices *config = NULL;
+ bool enabled = false;
- err = superio_enter(sioaddr);
+ /* First step, lock memory but don't enter configuration mode */
+ err = superio_enter(sioaddr, true);
if (err)
return err;
err = -ENODEV;
chip_type = superio_inw(sioaddr, DEVID);
- /* check first for a valid chip before forcing chip id */
- if (chip_type == 0xffff)
- goto exit;
+ /* Check for a valid chip before forcing chip id */
+ if (chip_type == 0xffff) {
+ /* Enter configuration mode */
+ __superio_enter(sioaddr);
+ enabled = true;
+ /* and then try again */
+ chip_type = superio_inw(sioaddr, DEVID);
+ if (chip_type == 0xffff)
+ goto exit;
+ }
if (force_id_cnt == 1) {
/* If only one value given use for all chips */
@@ -2766,6 +2797,18 @@ static int __init it87_find(int sioaddr, unsigned short *address,
config = &it87_devices[sio_data->type];
+ /*
+ * If previously we didn't enter configuration mode and it isn't a
+ * chip we know is initialised in configuration mode, then enter
+ * configuration mode.
+ *
+ * I don't know if any such chips can exist but be defensive.
+ */
+ if (!enabled && !has_noconf(config)) {
+ __superio_enter(sioaddr);
+ enabled = true;
+ }
+
superio_select(sioaddr, PME);
if (!(superio_inb(sioaddr, IT87_ACT_REG) & 0x01)) {
pr_info("Device (chip %s ioreg 0x%x) not activated, skipping\n",
@@ -3143,7 +3186,7 @@ static int __init it87_find(int sioaddr, unsigned short *address,
}
exit:
- superio_exit(sioaddr, config ? has_conf_noexit(config) : false);
+ superio_exit(sioaddr, !enabled);
return err;
}
@@ -3520,7 +3563,7 @@ static void it87_resume_sio(struct platform_device *pdev)
if (!data->need_in7_reroute)
return;
- err = superio_enter(data->sioaddr);
+ err = superio_enter(data->sioaddr, has_noconf(data));
if (err) {
dev_warn(&pdev->dev,
"Unable to enter Super I/O to reroute in7 (%d)",
@@ -3540,7 +3583,7 @@ static void it87_resume_sio(struct platform_device *pdev)
reg2c);
}
- superio_exit(data->sioaddr, has_conf_noexit(data));
+ superio_exit(data->sioaddr, has_noconf(data));
}
static int it87_resume(struct device *dev)
@@ -3641,27 +3684,6 @@ static int it87_dmi_cb(const struct dmi_system_id *dmi_entry)
}
/*
- * On various Gigabyte AM4 boards (AB350, AX370), the second Super-IO chip
- * (IT8792E) needs to be in configuration mode before accessing the first
- * due to a bug in IT8792E which otherwise results in LPC bus access errors.
- * This needs to be done before accessing the first Super-IO chip since
- * the second chip may have been accessed prior to loading this driver.
- *
- * The problem is also reported to affect IT8795E, which is used on X299 boards
- * and has the same chip ID as IT8792E (0x8733). It also appears to affect
- * systems with IT8790E, which is used on some Z97X-Gaming boards as well as
- * Z87X-OC.
- * DMI entries for those systems will be added as they become available and
- * as the problem is confirmed to affect those boards.
- */
-static int it87_sio_force(const struct dmi_system_id *dmi_entry)
-{
- __superio_enter(REG_4E);
-
- return it87_dmi_cb(dmi_entry);
-};
-
-/*
* On the Shuttle SN68PT, FAN_CTL2 is apparently not
* connected to a fan, but to something else. One user
* has reported instant system power-off when changing
@@ -3683,34 +3705,7 @@ static struct it87_dmi_data nvidia_fn68pt = {
.driver_data = data, \
}
-#define IT87_DMI_MATCH_GBT(name, cb, data) \
- IT87_DMI_MATCH_VND("Gigabyte Technology Co., Ltd.", name, cb, data)
-
static const struct dmi_system_id it87_dmi_table[] __initconst = {
- IT87_DMI_MATCH_GBT("AB350", it87_sio_force, NULL),
- /* ? + IT8792E/IT8795E */
- IT87_DMI_MATCH_GBT("AX370", it87_sio_force, NULL),
- /* ? + IT8792E/IT8795E */
- IT87_DMI_MATCH_GBT("Z97X-Gaming G1", it87_sio_force, NULL),
- /* ? + IT8790E */
- IT87_DMI_MATCH_GBT("TRX40 AORUS XTREME", it87_sio_force, NULL),
- /* IT8688E + IT8792E/IT8795E */
- IT87_DMI_MATCH_GBT("Z390 AORUS ULTRA-CF", it87_sio_force, NULL),
- /* IT8688E + IT8792E/IT8795E */
- IT87_DMI_MATCH_GBT("B550 AORUS PRO AC", it87_sio_force, NULL),
- /* IT8688E + IT8792E/IT8795E */
- IT87_DMI_MATCH_GBT("X570 AORUS MASTER", it87_sio_force, NULL),
- /* IT8688E + IT8792E/IT8795E */
- IT87_DMI_MATCH_GBT("X570 AORUS PRO", it87_sio_force, NULL),
- /* IT8688E + IT8792E/IT8795E */
- IT87_DMI_MATCH_GBT("X570 AORUS PRO WIFI", it87_sio_force, NULL),
- /* IT8688E + IT8792E/IT8795E */
- IT87_DMI_MATCH_GBT("X570S AERO G", it87_sio_force, NULL),
- /* IT8689E + IT87952E */
- IT87_DMI_MATCH_GBT("Z690 AORUS PRO DDR4", it87_sio_force, NULL),
- /* IT8689E + IT87952E */
- IT87_DMI_MATCH_GBT("Z690 AORUS PRO", it87_sio_force, NULL),
- /* IT8689E + IT87952E */
IT87_DMI_MATCH_VND("nVIDIA", "FN68PT", it87_dmi_cb, &nvidia_fn68pt),
{ }
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 75dc25df0f8b..7092f8f025b8 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -609,7 +609,7 @@ static const struct dev_pm_ops jc42_dev_pm_ops = {
#endif /* CONFIG_PM */
static const struct i2c_device_id jc42_id[] = {
- { "jc42", 0 },
+ { "jc42" },
{ }
};
MODULE_DEVICE_TABLE(i2c, jc42_id);
@@ -623,7 +623,7 @@ MODULE_DEVICE_TABLE(of, jc42_of_ids);
#endif
static struct i2c_driver jc42_driver = {
- .class = I2C_CLASS_SPD | I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "jc42",
.pm = JC42_DEV_PM_OPS,
diff --git a/drivers/hwmon/lenovo-ec-sensors.c b/drivers/hwmon/lenovo-ec-sensors.c
new file mode 100644
index 000000000000..143fb79713f7
--- /dev/null
+++ b/drivers/hwmon/lenovo-ec-sensors.c
@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * HWMON driver for Lenovo ThinkStation based workstations
+ * via the embedded controller registers
+ *
+ * Copyright (C) 2024 David Ober (Lenovo) <dober@lenovo.com>
+ *
+ * EC provides:
+ * - CPU temperature
+ * - DIMM temperature
+ * - Chassis zone temperatures
+ * - CPU fan RPM
+ * - DIMM fan RPM
+ * - Chassis fans RPM
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/units.h>
+
+#define MCHP_SING_IDX 0x0000
+#define MCHP_EMI0_APPLICATION_ID 0x090C
+#define MCHP_EMI0_EC_ADDRESS 0x0902
+#define MCHP_EMI0_EC_DATA_BYTE0 0x0904
+#define MCHP_EMI0_EC_DATA_BYTE1 0x0905
+#define MCHP_EMI0_EC_DATA_BYTE2 0x0906
+#define MCHP_EMI0_EC_DATA_BYTE3 0x0907
+#define IO_REGION_START 0x0900
+#define IO_REGION_LENGTH 0xD
+
+static inline u8
+get_ec_reg(unsigned char page, unsigned char index)
+{
+ u8 onebyte;
+ unsigned short m_index;
+ unsigned short phy_index = page * 256 + index;
+
+ outb_p(0x01, MCHP_EMI0_APPLICATION_ID);
+
+ m_index = phy_index & GENMASK(14, 2);
+ outw_p(m_index, MCHP_EMI0_EC_ADDRESS);
+
+ onebyte = inb_p(MCHP_EMI0_EC_DATA_BYTE0 + (phy_index & GENMASK(1, 0)));
+
+ outb_p(0x01, MCHP_EMI0_APPLICATION_ID); /* write 0x01 again to clean */
+ return onebyte;
+}
+
+enum systems {
+ LENOVO_PX,
+ LENOVO_P7,
+ LENOVO_P5,
+ LENOVO_P8,
+};
+
+static int px_temp_map[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15};
+
+static const char * const lenovo_px_ec_temp_label[] = {
+ "CPU1",
+ "CPU2",
+ "R_DIMM1",
+ "L_DIMM1",
+ "R_DIMM2",
+ "L_DIMM2",
+ "PCH",
+ "M2_R",
+ "M2_Z1R",
+ "M2_Z2R",
+ "PCI_Z1",
+ "PCI_Z2",
+ "PCI_Z3",
+ "PCI_Z4",
+ "AMB",
+};
+
+static int gen_temp_map[] = {0, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15};
+
+static const char * const lenovo_gen_ec_temp_label[] = {
+ "CPU1",
+ "R_DIMM",
+ "L_DIMM",
+ "PCH",
+ "M2_R",
+ "M2_Z1R",
+ "M2_Z2R",
+ "PCI_Z1",
+ "PCI_Z2",
+ "PCI_Z3",
+ "PCI_Z4",
+ "AMB",
+};
+
+static int px_fan_map[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15};
+
+static const char * const px_ec_fan_label[] = {
+ "CPU1_Fan",
+ "CPU2_Fan",
+ "Front_Fan1-1",
+ "Front_Fan1-2",
+ "Front_Fan2",
+ "Front_Fan3",
+ "MEM_Fan1",
+ "MEM_Fan2",
+ "Rear_Fan1",
+ "Rear_Fan2",
+ "Flex_Bay_Fan1",
+ "Flex_Bay_Fan2",
+ "Flex_Bay_Fan2",
+ "PSU_HDD_Fan",
+ "PSU1_Fan",
+ "PSU2_Fan",
+};
+
+static int p7_fan_map[] = {0, 2, 3, 4, 5, 6, 7, 8, 10, 11, 14};
+
+static const char * const p7_ec_fan_label[] = {
+ "CPU1_Fan",
+ "HP_CPU_Fan1",
+ "HP_CPU_Fan2",
+ "PCIE1_4_Fan",
+ "PCIE5_7_Fan",
+ "MEM_Fan1",
+ "MEM_Fan2",
+ "Rear_Fan1",
+ "BCB_Fan",
+ "Flex_Bay_Fan",
+ "PSU_Fan",
+};
+
+static int p5_fan_map[] = {0, 5, 6, 7, 8, 10, 11, 14};
+
+static const char * const p5_ec_fan_label[] = {
+ "CPU_Fan",
+ "HDD_Fan",
+ "Duct_Fan1",
+ "MEM_Fan",
+ "Rear_Fan",
+ "Front_Fan",
+ "Flex_Bay_Fan",
+ "PSU_Fan",
+};
+
+static int p8_fan_map[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 14};
+
+static const char * const p8_ec_fan_label[] = {
+ "CPU1_Fan",
+ "CPU2_Fan",
+ "HP_CPU_Fan1",
+ "HP_CPU_Fan2",
+ "PCIE1_4_Fan",
+ "PCIE5_7_Fan",
+ "DIMM1_Fan1",
+ "DIMM1_Fan2",
+ "DIMM2_Fan1",
+ "DIMM2_Fan2",
+ "Rear_Fan",
+ "HDD_Bay_Fan",
+ "Flex_Bay_Fan",
+ "PSU_Fan",
+};
+
+struct ec_sensors_data {
+ struct mutex mec_mutex; /* lock for sensor data access */
+ const char *const *fan_labels;
+ const char *const *temp_labels;
+ const int *fan_map;
+ const int *temp_map;
+};
+
+static int
+lenovo_ec_do_read_temp(struct ec_sensors_data *data, u32 attr, int channel, long *val)
+{
+ u8 lsb;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ mutex_lock(&data->mec_mutex);
+ lsb = get_ec_reg(2, 0x81 + channel);
+ mutex_unlock(&data->mec_mutex);
+ if (lsb <= 0x40)
+ return -ENODATA;
+ *val = (lsb - 0x40) * 1000;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int
+lenovo_ec_do_read_fan(struct ec_sensors_data *data, u32 attr, int channel, long *val)
+{
+ u8 lsb, msb;
+
+ channel *= 2;
+ switch (attr) {
+ case hwmon_fan_input:
+ mutex_lock(&data->mec_mutex);
+ lsb = get_ec_reg(4, 0x20 + channel);
+ msb = get_ec_reg(4, 0x21 + channel);
+ mutex_unlock(&data->mec_mutex);
+ *val = (msb << 8) + lsb;
+ return 0;
+ case hwmon_fan_max:
+ mutex_lock(&data->mec_mutex);
+ lsb = get_ec_reg(4, 0x40 + channel);
+ msb = get_ec_reg(4, 0x41 + channel);
+ mutex_unlock(&data->mec_mutex);
+ *val = (msb << 8) + lsb;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int
+lenovo_ec_hwmon_read_string(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ struct ec_sensors_data *state = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_temp:
+ *str = state->temp_labels[channel];
+ return 0;
+ case hwmon_fan:
+ *str = state->fan_labels[channel];
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int
+lenovo_ec_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct ec_sensors_data *data = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_temp:
+ return lenovo_ec_do_read_temp(data, attr, data->temp_map[channel], val);
+ case hwmon_fan:
+ return lenovo_ec_do_read_fan(data, attr, data->fan_map[channel], val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t
+lenovo_ec_hwmon_is_visible(const void *data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (type) {
+ case hwmon_temp:
+ if (attr == hwmon_temp_input || attr == hwmon_temp_label)
+ return 0444;
+ return 0;
+ case hwmon_fan:
+ if (attr == hwmon_fan_input || attr == hwmon_fan_max || attr == hwmon_fan_label)
+ return 0444;
+ return 0;
+ default:
+ return 0;
+ }
+}
+
+static const struct hwmon_channel_info *lenovo_ec_hwmon_info_px[] = {
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL),
+ HWMON_CHANNEL_INFO(fan,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX),
+ NULL
+};
+
+static const struct hwmon_channel_info *lenovo_ec_hwmon_info_p8[] = {
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL),
+ HWMON_CHANNEL_INFO(fan,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX),
+ NULL
+};
+
+static const struct hwmon_channel_info *lenovo_ec_hwmon_info_p7[] = {
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL),
+ HWMON_CHANNEL_INFO(fan,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX),
+ NULL
+};
+
+static const struct hwmon_channel_info *lenovo_ec_hwmon_info_p5[] = {
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL),
+ HWMON_CHANNEL_INFO(fan,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MAX),
+ NULL
+};
+
+static const struct hwmon_ops lenovo_ec_hwmon_ops = {
+ .is_visible = lenovo_ec_hwmon_is_visible,
+ .read = lenovo_ec_hwmon_read,
+ .read_string = lenovo_ec_hwmon_read_string,
+};
+
+static struct hwmon_chip_info lenovo_ec_chip_info = {
+ .ops = &lenovo_ec_hwmon_ops,
+};
+
+static const struct dmi_system_id thinkstation_dmi_table[] = {
+ {
+ .ident = "LENOVO_PX",
+ .driver_data = (void *)(long)LENOVO_PX,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "30EU"),
+ },
+ },
+ {
+ .ident = "LENOVO_PX",
+ .driver_data = (void *)(long)LENOVO_PX,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "30EV"),
+ },
+ },
+ {
+ .ident = "LENOVO_P7",
+ .driver_data = (void *)(long)LENOVO_P7,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "30F2"),
+ },
+ },
+ {
+ .ident = "LENOVO_P7",
+ .driver_data = (void *)(long)LENOVO_P7,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "30F3"),
+ },
+ },
+ {
+ .ident = "LENOVO_P5",
+ .driver_data = (void *)(long)LENOVO_P5,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "30G9"),
+ },
+ },
+ {
+ .ident = "LENOVO_P5",
+ .driver_data = (void *)(long)LENOVO_P5,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "30GA"),
+ },
+ },
+ {
+ .ident = "LENOVO_P8",
+ .driver_data = (void *)(long)LENOVO_P8,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "30HH"),
+ },
+ },
+ {
+ .ident = "LENOVO_P8",
+ .driver_data = (void *)(long)LENOVO_P8,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "30HJ"),
+ },
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(dmi, thinkstation_dmi_table);
+
+static int lenovo_ec_probe(struct platform_device *pdev)
+{
+ struct device *hwdev;
+ struct ec_sensors_data *ec_data;
+ const struct hwmon_chip_info *chip_info;
+ struct device *dev = &pdev->dev;
+ const struct dmi_system_id *dmi_id;
+ int app_id;
+
+ ec_data = devm_kzalloc(dev, sizeof(struct ec_sensors_data), GFP_KERNEL);
+ if (!ec_data)
+ return -ENOMEM;
+
+ if (!request_region(IO_REGION_START, IO_REGION_LENGTH, "LNV-WKS")) {
+ pr_err(":request fail\n");
+ return -EIO;
+ }
+
+ dev_set_drvdata(dev, ec_data);
+
+ chip_info = &lenovo_ec_chip_info;
+
+ mutex_init(&ec_data->mec_mutex);
+
+ mutex_lock(&ec_data->mec_mutex);
+ app_id = inb_p(MCHP_EMI0_APPLICATION_ID);
+ if (app_id) /* check EMI Application ID Value */
+ outb_p(app_id, MCHP_EMI0_APPLICATION_ID); /* set EMI Application ID to 0 */
+ outw_p(MCHP_SING_IDX, MCHP_EMI0_EC_ADDRESS);
+ mutex_unlock(&ec_data->mec_mutex);
+
+ if ((inb_p(MCHP_EMI0_EC_DATA_BYTE0) != 'M') &&
+ (inb_p(MCHP_EMI0_EC_DATA_BYTE1) != 'C') &&
+ (inb_p(MCHP_EMI0_EC_DATA_BYTE2) != 'H') &&
+ (inb_p(MCHP_EMI0_EC_DATA_BYTE3) != 'P')) {
+ release_region(IO_REGION_START, IO_REGION_LENGTH);
+ return -ENODEV;
+ }
+
+ dmi_id = dmi_first_match(thinkstation_dmi_table);
+
+ switch ((long)dmi_id->driver_data) {
+ case 0:
+ ec_data->fan_labels = px_ec_fan_label;
+ ec_data->temp_labels = lenovo_px_ec_temp_label;
+ ec_data->fan_map = px_fan_map;
+ ec_data->temp_map = px_temp_map;
+ lenovo_ec_chip_info.info = lenovo_ec_hwmon_info_px;
+ break;
+ case 1:
+ ec_data->fan_labels = p7_ec_fan_label;
+ ec_data->temp_labels = lenovo_gen_ec_temp_label;
+ ec_data->fan_map = p7_fan_map;
+ ec_data->temp_map = gen_temp_map;
+ lenovo_ec_chip_info.info = lenovo_ec_hwmon_info_p7;
+ break;
+ case 2:
+ ec_data->fan_labels = p5_ec_fan_label;
+ ec_data->temp_labels = lenovo_gen_ec_temp_label;
+ ec_data->fan_map = p5_fan_map;
+ ec_data->temp_map = gen_temp_map;
+ lenovo_ec_chip_info.info = lenovo_ec_hwmon_info_p5;
+ break;
+ case 3:
+ ec_data->fan_labels = p8_ec_fan_label;
+ ec_data->temp_labels = lenovo_gen_ec_temp_label;
+ ec_data->fan_map = p8_fan_map;
+ ec_data->temp_map = gen_temp_map;
+ lenovo_ec_chip_info.info = lenovo_ec_hwmon_info_p8;
+ break;
+ default:
+ release_region(IO_REGION_START, IO_REGION_LENGTH);
+ return -ENODEV;
+ }
+
+ hwdev = devm_hwmon_device_register_with_info(dev, "lenovo_ec",
+ ec_data,
+ chip_info, NULL);
+
+ return PTR_ERR_OR_ZERO(hwdev);
+}
+
+static struct platform_driver lenovo_ec_sensors_platform_driver = {
+ .driver = {
+ .name = "lenovo-ec-sensors",
+ },
+ .probe = lenovo_ec_probe,
+};
+
+static struct platform_device *lenovo_ec_sensors_platform_device;
+
+static int __init lenovo_ec_init(void)
+{
+ if (!dmi_check_system(thinkstation_dmi_table))
+ return -ENODEV;
+
+ lenovo_ec_sensors_platform_device =
+ platform_create_bundle(&lenovo_ec_sensors_platform_driver,
+ lenovo_ec_probe, NULL, 0, NULL, 0);
+
+ if (IS_ERR(lenovo_ec_sensors_platform_device)) {
+ release_region(IO_REGION_START, IO_REGION_LENGTH);
+ return PTR_ERR(lenovo_ec_sensors_platform_device);
+ }
+
+ return 0;
+}
+module_init(lenovo_ec_init);
+
+static void __exit lenovo_ec_exit(void)
+{
+ release_region(IO_REGION_START, IO_REGION_LENGTH);
+ platform_device_unregister(lenovo_ec_sensors_platform_device);
+ platform_driver_unregister(&lenovo_ec_sensors_platform_driver);
+}
+module_exit(lenovo_ec_exit);
+
+MODULE_AUTHOR("David Ober <dober@lenovo.com>");
+MODULE_DESCRIPTION("HWMON driver for sensors accessible via EC in LENOVO motherboards");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/lineage-pem.c b/drivers/hwmon/lineage-pem.c
index df69c380cde7..64a335a64a2e 100644
--- a/drivers/hwmon/lineage-pem.c
+++ b/drivers/hwmon/lineage-pem.c
@@ -502,7 +502,7 @@ static int pem_probe(struct i2c_client *client)
}
static const struct i2c_device_id pem_id[] = {
- {"lineage_pem", 0},
+ {"lineage_pem"},
{}
};
MODULE_DEVICE_TABLE(i2c, pem_id);
diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c
index c20a749fc7f2..481e4e1f8f4f 100644
--- a/drivers/hwmon/lm70.c
+++ b/drivers/hwmon/lm70.c
@@ -6,9 +6,9 @@
* Copyright (C) 2006 Kaiwan N Billimoria <kaiwan@designergraphix.com>
*
* The LM70 communicates with a host processor via an SPI/Microwire Bus
- * interface. The complete datasheet is available at National's website
+ * interface. The complete datasheet is available at TI's website
* here:
- * http://www.national.com/pf/LM/LM70.html
+ * https://www.ti.com/product/LM70
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
index 637d35c5ae23..581b01572e1b 100644
--- a/drivers/hwmon/lm73.c
+++ b/drivers/hwmon/lm73.c
@@ -220,7 +220,7 @@ lm73_probe(struct i2c_client *client)
}
static const struct i2c_device_id lm73_ids[] = {
- { "lm73", 0 },
+ { "lm73" },
{ /* LIST END */ }
};
MODULE_DEVICE_TABLE(i2c, lm73_ids);
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index 8b9862519178..80f7a6a3f9a2 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -337,7 +337,7 @@ static int lm77_probe(struct i2c_client *client)
}
static const struct i2c_device_id lm77_id[] = {
- { "lm77", 0 },
+ { "lm77" },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm77_id);
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index 2195a735d28e..d2d970e73c61 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -975,8 +975,8 @@ static int lm87_probe(struct i2c_client *client)
*/
static const struct i2c_device_id lm87_id[] = {
- { "lm87", 0 },
- { "adm1024", 0 },
+ { "lm87" },
+ { "adm1024" },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm87_id);
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index 75bca805720e..be4853fad80f 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -2624,8 +2624,8 @@ static int lm93_probe(struct i2c_client *client)
}
static const struct i2c_device_id lm93_id[] = {
- { "lm93", 0 },
- { "lm94", 0 },
+ { "lm93" },
+ { "lm94" },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm93_id);
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index 475551f5024b..cad0a0ff8416 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -457,8 +457,8 @@ static int lm95241_probe(struct i2c_client *client)
/* Driver data (common to all clients) */
static const struct i2c_device_id lm95241_id[] = {
- { "lm95231", 0 },
- { "lm95241", 0 },
+ { "lm95231" },
+ { "lm95241" },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm95241_id);
diff --git a/drivers/hwmon/lm95245.c b/drivers/hwmon/lm95245.c
index 17ff54bd4015..d293b4f15dc1 100644
--- a/drivers/hwmon/lm95245.c
+++ b/drivers/hwmon/lm95245.c
@@ -578,8 +578,8 @@ static int lm95245_probe(struct i2c_client *client)
/* Driver data (common to all clients) */
static const struct i2c_device_id lm95245_id[] = {
- { "lm95235", 0 },
- { "lm95245", 0 },
+ { "lm95235" },
+ { "lm95245" },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm95245_id);
diff --git a/drivers/hwmon/ltc2945.c b/drivers/hwmon/ltc2945.c
index 45b87a863cae..3e0e0e0687bd 100644
--- a/drivers/hwmon/ltc2945.c
+++ b/drivers/hwmon/ltc2945.c
@@ -508,7 +508,7 @@ static int ltc2945_probe(struct i2c_client *client)
}
static const struct i2c_device_id ltc2945_id[] = {
- {"ltc2945", 0},
+ {"ltc2945"},
{ }
};
diff --git a/drivers/hwmon/ltc2947-i2c.c b/drivers/hwmon/ltc2947-i2c.c
index 33f574bf2ce7..176d710706dd 100644
--- a/drivers/hwmon/ltc2947-i2c.c
+++ b/drivers/hwmon/ltc2947-i2c.c
@@ -27,7 +27,7 @@ static int ltc2947_probe(struct i2c_client *i2c)
}
static const struct i2c_device_id ltc2947_id[] = {
- {"ltc2947", 0},
+ {"ltc2947"},
{}
};
MODULE_DEVICE_TABLE(i2c, ltc2947_id);
diff --git a/drivers/hwmon/ltc2990.c b/drivers/hwmon/ltc2990.c
index 1ad362c0fd2c..f1c1933c52cf 100644
--- a/drivers/hwmon/ltc2990.c
+++ b/drivers/hwmon/ltc2990.c
@@ -259,7 +259,7 @@ static int ltc2990_i2c_probe(struct i2c_client *i2c)
}
static const struct i2c_device_id ltc2990_i2c_id[] = {
- { "ltc2990", 0 },
+ { "ltc2990" },
{}
};
MODULE_DEVICE_TABLE(i2c, ltc2990_i2c_id);
diff --git a/drivers/hwmon/ltc2991.c b/drivers/hwmon/ltc2991.c
index 80a6e391f266..06750bb93c23 100644
--- a/drivers/hwmon/ltc2991.c
+++ b/drivers/hwmon/ltc2991.c
@@ -414,7 +414,7 @@ static const struct of_device_id ltc2991_of_match[] = {
MODULE_DEVICE_TABLE(of, ltc2991_of_match);
static const struct i2c_device_id ltc2991_i2c_id[] = {
- { "ltc2991", 0 },
+ { "ltc2991" },
{}
};
MODULE_DEVICE_TABLE(i2c, ltc2991_i2c_id);
diff --git a/drivers/hwmon/ltc2992.c b/drivers/hwmon/ltc2992.c
index 001799bc28ed..229aed15d5ca 100644
--- a/drivers/hwmon/ltc2992.c
+++ b/drivers/hwmon/ltc2992.c
@@ -922,7 +922,7 @@ static const struct of_device_id ltc2992_of_match[] = {
MODULE_DEVICE_TABLE(of, ltc2992_of_match);
static const struct i2c_device_id ltc2992_i2c_id[] = {
- {"ltc2992", 0},
+ {"ltc2992"},
{}
};
MODULE_DEVICE_TABLE(i2c, ltc2992_i2c_id);
diff --git a/drivers/hwmon/ltc4151.c b/drivers/hwmon/ltc4151.c
index f42ac3c9475e..fa66eda78efe 100644
--- a/drivers/hwmon/ltc4151.c
+++ b/drivers/hwmon/ltc4151.c
@@ -188,7 +188,7 @@ static int ltc4151_probe(struct i2c_client *client)
}
static const struct i2c_device_id ltc4151_id[] = {
- { "ltc4151", 0 },
+ { "ltc4151" },
{ }
};
MODULE_DEVICE_TABLE(i2c, ltc4151_id);
diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c
index 66fd28f713ab..cce452711cec 100644
--- a/drivers/hwmon/ltc4215.c
+++ b/drivers/hwmon/ltc4215.c
@@ -245,7 +245,7 @@ static int ltc4215_probe(struct i2c_client *client)
}
static const struct i2c_device_id ltc4215_id[] = {
- { "ltc4215", 0 },
+ { "ltc4215" },
{ }
};
MODULE_DEVICE_TABLE(i2c, ltc4215_id);
diff --git a/drivers/hwmon/ltc4222.c b/drivers/hwmon/ltc4222.c
index 9098ef521739..f7eb007fd766 100644
--- a/drivers/hwmon/ltc4222.c
+++ b/drivers/hwmon/ltc4222.c
@@ -200,7 +200,7 @@ static int ltc4222_probe(struct i2c_client *client)
}
static const struct i2c_device_id ltc4222_id[] = {
- {"ltc4222", 0},
+ {"ltc4222"},
{ }
};
diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c
index b90184a3e0ec..14593bc81e85 100644
--- a/drivers/hwmon/ltc4245.c
+++ b/drivers/hwmon/ltc4245.c
@@ -469,7 +469,7 @@ static int ltc4245_probe(struct i2c_client *client)
}
static const struct i2c_device_id ltc4245_id[] = {
- { "ltc4245", 0 },
+ { "ltc4245" },
{ }
};
MODULE_DEVICE_TABLE(i2c, ltc4245_id);
diff --git a/drivers/hwmon/ltc4260.c b/drivers/hwmon/ltc4260.c
index 52f7a809b27b..9750dc9aa336 100644
--- a/drivers/hwmon/ltc4260.c
+++ b/drivers/hwmon/ltc4260.c
@@ -163,7 +163,7 @@ static int ltc4260_probe(struct i2c_client *client)
}
static const struct i2c_device_id ltc4260_id[] = {
- {"ltc4260", 0},
+ {"ltc4260"},
{ }
};
diff --git a/drivers/hwmon/ltc4261.c b/drivers/hwmon/ltc4261.c
index 509e68176c7a..2cd218a6a3be 100644
--- a/drivers/hwmon/ltc4261.c
+++ b/drivers/hwmon/ltc4261.c
@@ -222,7 +222,7 @@ static int ltc4261_probe(struct i2c_client *client)
}
static const struct i2c_device_id ltc4261_id[] = {
- {"ltc4261", 0},
+ {"ltc4261"},
{}
};
diff --git a/drivers/hwmon/max127.c b/drivers/hwmon/max127.c
index da2289e3560a..a9aab8862f5e 100644
--- a/drivers/hwmon/max127.c
+++ b/drivers/hwmon/max127.c
@@ -329,7 +329,7 @@ static int max127_probe(struct i2c_client *client)
}
static const struct i2c_device_id max127_id[] = {
- { "max127", 0 },
+ { "max127" },
{ }
};
MODULE_DEVICE_TABLE(i2c, max127_id);
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 500dc926a7a7..a89a519cf5d9 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -285,7 +285,7 @@ static int max1619_probe(struct i2c_client *new_client)
}
static const struct i2c_device_id max1619_id[] = {
- { "max1619", 0 },
+ { "max1619" },
{ }
};
MODULE_DEVICE_TABLE(i2c, max1619_id);
diff --git a/drivers/hwmon/max31730.c b/drivers/hwmon/max31730.c
index 7d237db6e57c..2f4b419b6c9e 100644
--- a/drivers/hwmon/max31730.c
+++ b/drivers/hwmon/max31730.c
@@ -345,7 +345,7 @@ max31730_probe(struct i2c_client *client)
}
static const struct i2c_device_id max31730_ids[] = {
- { "max31730", 0, },
+ { "max31730" },
{ }
};
MODULE_DEVICE_TABLE(i2c, max31730_ids);
diff --git a/drivers/hwmon/max31790.c b/drivers/hwmon/max31790.c
index 3dc95196b229..f56913327004 100644
--- a/drivers/hwmon/max31790.c
+++ b/drivers/hwmon/max31790.c
@@ -49,6 +49,9 @@
#define NR_CHANNEL 6
+#define PWM_INPUT_SCALE 255
+#define MAX31790_REG_PWMOUT_SCALE 511
+
/*
* Client data (each client gets its own)
*/
@@ -343,10 +346,13 @@ static int max31790_write_pwm(struct device *dev, u32 attr, int channel,
err = -EINVAL;
break;
}
+
+ val = DIV_ROUND_CLOSEST(val * MAX31790_REG_PWMOUT_SCALE,
+ PWM_INPUT_SCALE);
data->valid = false;
err = i2c_smbus_write_word_swapped(client,
MAX31790_REG_PWMOUT(channel),
- val << 8);
+ val << 7);
break;
case hwmon_pwm_enable:
fan_config = data->fan_config[channel];
@@ -537,7 +543,7 @@ static int max31790_probe(struct i2c_client *client)
}
static const struct i2c_device_id max31790_id[] = {
- { "max31790", 0 },
+ { "max31790" },
{ }
};
MODULE_DEVICE_TABLE(i2c, max31790_id);
diff --git a/drivers/hwmon/max6620.c b/drivers/hwmon/max6620.c
index 5d12fb9c9786..13201fb755c9 100644
--- a/drivers/hwmon/max6620.c
+++ b/drivers/hwmon/max6620.c
@@ -493,7 +493,7 @@ static int max6620_probe(struct i2c_client *client)
}
static const struct i2c_device_id max6620_id[] = {
- { "max6620", 0 },
+ { "max6620" },
{ }
};
MODULE_DEVICE_TABLE(i2c, max6620_id);
diff --git a/drivers/hwmon/max6621.c b/drivers/hwmon/max6621.c
index 05426cde0e36..a7066f3a0bb4 100644
--- a/drivers/hwmon/max6621.c
+++ b/drivers/hwmon/max6621.c
@@ -537,7 +537,7 @@ static int max6621_probe(struct i2c_client *client)
}
static const struct i2c_device_id max6621_id[] = {
- { MAX6621_DRV_NAME, 0 },
+ { MAX6621_DRV_NAME },
{ }
};
MODULE_DEVICE_TABLE(i2c, max6621_id);
diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c
index aa7f21ab2395..cbb595fe47aa 100644
--- a/drivers/hwmon/max6639.c
+++ b/drivers/hwmon/max6639.c
@@ -20,6 +20,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/platform_data/max6639.h>
+#include <linux/regmap.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };
@@ -57,6 +58,8 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };
#define MAX6639_FAN_CONFIG3_THERM_FULL_SPEED 0x40
+#define MAX6639_NUM_CHANNELS 2
+
static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
#define FAN_FROM_REG(val, rpm_range) ((val) == 0 || (val) == 255 ? \
@@ -67,22 +70,7 @@ static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
* Client data (each client gets its own)
*/
struct max6639_data {
- struct i2c_client *client;
- struct mutex update_lock;
- bool valid; /* true if following fields are valid */
- unsigned long last_updated; /* In jiffies */
-
- /* Register values sampled regularly */
- u16 temp[2]; /* Temperature, in 1/8 C, 0..255 C */
- bool temp_fault[2]; /* Detected temperature diode failure */
- u8 fan[2]; /* Register value: TACH count for fans >=30 */
- u8 status; /* Detected channel alarms and fan failures */
-
- /* Register values only written to */
- u8 pwm[2]; /* Register value: Duty cycle 0..120 */
- u8 temp_therm[2]; /* THERM Temperature, 0..255 C (->_max) */
- u8 temp_alert[2]; /* ALERT Temperature, 0..255 C (->_crit) */
- u8 temp_ot[2]; /* OT Temperature, 0..255 C (->_emergency) */
+ struct regmap *regmap;
/* Register values initialized only once */
u8 ppr; /* Pulses per rotation 0..3 for 1..4 ppr */
@@ -92,90 +80,47 @@ struct max6639_data {
struct regulator *reg;
};
-static struct max6639_data *max6639_update_device(struct device *dev)
-{
- struct max6639_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
- struct max6639_data *ret = data;
- int i;
- int status_reg;
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
- int res;
-
- dev_dbg(&client->dev, "Starting max6639 update\n");
-
- status_reg = i2c_smbus_read_byte_data(client,
- MAX6639_REG_STATUS);
- if (status_reg < 0) {
- ret = ERR_PTR(status_reg);
- goto abort;
- }
-
- data->status = status_reg;
-
- for (i = 0; i < 2; i++) {
- res = i2c_smbus_read_byte_data(client,
- MAX6639_REG_FAN_CNT(i));
- if (res < 0) {
- ret = ERR_PTR(res);
- goto abort;
- }
- data->fan[i] = res;
-
- res = i2c_smbus_read_byte_data(client,
- MAX6639_REG_TEMP_EXT(i));
- if (res < 0) {
- ret = ERR_PTR(res);
- goto abort;
- }
- data->temp[i] = res >> 5;
- data->temp_fault[i] = res & 0x01;
-
- res = i2c_smbus_read_byte_data(client,
- MAX6639_REG_TEMP(i));
- if (res < 0) {
- ret = ERR_PTR(res);
- goto abort;
- }
- data->temp[i] |= res << 3;
- }
-
- data->last_updated = jiffies;
- data->valid = true;
- }
-abort:
- mutex_unlock(&data->update_lock);
-
- return ret;
-}
-
static ssize_t temp_input_show(struct device *dev,
struct device_attribute *dev_attr, char *buf)
{
long temp;
- struct max6639_data *data = max6639_update_device(dev);
+ struct max6639_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+ unsigned int val;
+ int res;
+
+ /*
+ * Lock isn't needed as MAX6639_REG_TEMP wpnt change for at least 250ms after reading
+ * MAX6639_REG_TEMP_EXT
+ */
+ res = regmap_read(data->regmap, MAX6639_REG_TEMP_EXT(attr->index), &val);
+ if (res < 0)
+ return res;
+
+ temp = val >> 5;
+ res = regmap_read(data->regmap, MAX6639_REG_TEMP(attr->index), &val);
+ if (res < 0)
+ return res;
- if (IS_ERR(data))
- return PTR_ERR(data);
+ temp |= val << 3;
+ temp *= 125;
- temp = data->temp[attr->index] * 125;
return sprintf(buf, "%ld\n", temp);
}
static ssize_t temp_fault_show(struct device *dev,
struct device_attribute *dev_attr, char *buf)
{
- struct max6639_data *data = max6639_update_device(dev);
+ struct max6639_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+ unsigned int val;
+ int res;
- if (IS_ERR(data))
- return PTR_ERR(data);
+ res = regmap_read(data->regmap, MAX6639_REG_TEMP_EXT(attr->index), &val);
+ if (res < 0)
+ return res;
- return sprintf(buf, "%d\n", data->temp_fault[attr->index]);
+ return sprintf(buf, "%d\n", val & 1);
}
static ssize_t temp_max_show(struct device *dev,
@@ -183,8 +128,14 @@ static ssize_t temp_max_show(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
+ unsigned int val;
+ int res;
- return sprintf(buf, "%d\n", (data->temp_therm[attr->index] * 1000));
+ res = regmap_read(data->regmap, MAX6639_REG_THERM_LIMIT(attr->index), &val);
+ if (res < 0)
+ return res;
+
+ return sprintf(buf, "%d\n", (val * 1000));
}
static ssize_t temp_max_store(struct device *dev,
@@ -193,7 +144,6 @@ static ssize_t temp_max_store(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
unsigned long val;
int res;
@@ -201,12 +151,8 @@ static ssize_t temp_max_store(struct device *dev,
if (res)
return res;
- mutex_lock(&data->update_lock);
- data->temp_therm[attr->index] = TEMP_LIMIT_TO_REG(val);
- i2c_smbus_write_byte_data(client,
- MAX6639_REG_THERM_LIMIT(attr->index),
- data->temp_therm[attr->index]);
- mutex_unlock(&data->update_lock);
+ regmap_write(data->regmap, MAX6639_REG_THERM_LIMIT(attr->index),
+ TEMP_LIMIT_TO_REG(val));
return count;
}
@@ -215,8 +161,14 @@ static ssize_t temp_crit_show(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
+ unsigned int val;
+ int res;
+
+ res = regmap_read(data->regmap, MAX6639_REG_ALERT_LIMIT(attr->index), &val);
+ if (res < 0)
+ return res;
- return sprintf(buf, "%d\n", (data->temp_alert[attr->index] * 1000));
+ return sprintf(buf, "%d\n", (val * 1000));
}
static ssize_t temp_crit_store(struct device *dev,
@@ -225,7 +177,6 @@ static ssize_t temp_crit_store(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
unsigned long val;
int res;
@@ -233,12 +184,8 @@ static ssize_t temp_crit_store(struct device *dev,
if (res)
return res;
- mutex_lock(&data->update_lock);
- data->temp_alert[attr->index] = TEMP_LIMIT_TO_REG(val);
- i2c_smbus_write_byte_data(client,
- MAX6639_REG_ALERT_LIMIT(attr->index),
- data->temp_alert[attr->index]);
- mutex_unlock(&data->update_lock);
+ regmap_write(data->regmap, MAX6639_REG_ALERT_LIMIT(attr->index),
+ TEMP_LIMIT_TO_REG(val));
return count;
}
@@ -248,8 +195,14 @@ static ssize_t temp_emergency_show(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
+ unsigned int val;
+ int res;
+
+ res = regmap_read(data->regmap, MAX6639_REG_OT_LIMIT(attr->index), &val);
+ if (res < 0)
+ return res;
- return sprintf(buf, "%d\n", (data->temp_ot[attr->index] * 1000));
+ return sprintf(buf, "%d\n", (val * 1000));
}
static ssize_t temp_emergency_store(struct device *dev,
@@ -258,7 +211,6 @@ static ssize_t temp_emergency_store(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
unsigned long val;
int res;
@@ -266,12 +218,8 @@ static ssize_t temp_emergency_store(struct device *dev,
if (res)
return res;
- mutex_lock(&data->update_lock);
- data->temp_ot[attr->index] = TEMP_LIMIT_TO_REG(val);
- i2c_smbus_write_byte_data(client,
- MAX6639_REG_OT_LIMIT(attr->index),
- data->temp_ot[attr->index]);
- mutex_unlock(&data->update_lock);
+ regmap_write(data->regmap, MAX6639_REG_OT_LIMIT(attr->index), TEMP_LIMIT_TO_REG(val));
+
return count;
}
@@ -280,8 +228,14 @@ static ssize_t pwm_show(struct device *dev, struct device_attribute *dev_attr,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
+ unsigned int val;
+ int res;
- return sprintf(buf, "%d\n", data->pwm[attr->index] * 255 / 120);
+ res = regmap_read(data->regmap, MAX6639_REG_TARGTDUTY(attr->index), &val);
+ if (res < 0)
+ return res;
+
+ return sprintf(buf, "%d\n", val * 255 / 120);
}
static ssize_t pwm_store(struct device *dev,
@@ -290,7 +244,6 @@ static ssize_t pwm_store(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
unsigned long val;
int res;
@@ -300,38 +253,39 @@ static ssize_t pwm_store(struct device *dev,
val = clamp_val(val, 0, 255);
- mutex_lock(&data->update_lock);
- data->pwm[attr->index] = (u8)(val * 120 / 255);
- i2c_smbus_write_byte_data(client,
- MAX6639_REG_TARGTDUTY(attr->index),
- data->pwm[attr->index]);
- mutex_unlock(&data->update_lock);
+ regmap_write(data->regmap, MAX6639_REG_TARGTDUTY(attr->index), val * 120 / 255);
+
return count;
}
static ssize_t fan_input_show(struct device *dev,
struct device_attribute *dev_attr, char *buf)
{
- struct max6639_data *data = max6639_update_device(dev);
+ struct max6639_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+ unsigned int val;
+ int res;
- if (IS_ERR(data))
- return PTR_ERR(data);
+ res = regmap_read(data->regmap, MAX6639_REG_FAN_CNT(attr->index), &val);
+ if (res < 0)
+ return res;
- return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
- data->rpm_range));
+ return sprintf(buf, "%d\n", FAN_FROM_REG(val, data->rpm_range));
}
static ssize_t alarm_show(struct device *dev,
struct device_attribute *dev_attr, char *buf)
{
- struct max6639_data *data = max6639_update_device(dev);
+ struct max6639_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+ unsigned int val;
+ int res;
- if (IS_ERR(data))
- return PTR_ERR(data);
+ res = regmap_read(data->regmap, MAX6639_REG_STATUS, &val);
+ if (res < 0)
+ return res;
- return sprintf(buf, "%d\n", !!(data->status & (1 << attr->index)));
+ return sprintf(buf, "%d\n", !!(val & (1 << attr->index)));
}
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0);
@@ -401,6 +355,11 @@ static int rpm_range_to_reg(int range)
return 1; /* default: 4000 RPM */
}
+static int max6639_set_ppr(struct max6639_data *data, u8 channel, u8 ppr)
+{
+ return regmap_write(data->regmap, MAX6639_REG_FAN_PPR(channel), ppr << 6);
+}
+
static int max6639_init_client(struct i2c_client *client,
struct max6639_data *data)
{
@@ -408,94 +367,76 @@ static int max6639_init_client(struct i2c_client *client,
dev_get_platdata(&client->dev);
int i;
int rpm_range = 1; /* default: 4000 RPM */
- int err;
+ int err, ppr;
/* Reset chip to default values, see below for GCONFIG setup */
- err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
- MAX6639_GCONFIG_POR);
+ err = regmap_write(data->regmap, MAX6639_REG_GCONFIG, MAX6639_GCONFIG_POR);
if (err)
- goto exit;
+ return err;
/* Fans pulse per revolution is 2 by default */
if (max6639_info && max6639_info->ppr > 0 &&
max6639_info->ppr < 5)
- data->ppr = max6639_info->ppr;
+ ppr = max6639_info->ppr;
else
- data->ppr = 2;
- data->ppr -= 1;
+ ppr = 2;
+ ppr -= 1;
if (max6639_info)
rpm_range = rpm_range_to_reg(max6639_info->rpm_range);
data->rpm_range = rpm_range;
- for (i = 0; i < 2; i++) {
+ for (i = 0; i < MAX6639_NUM_CHANNELS; i++) {
/* Set Fan pulse per revolution */
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_FAN_PPR(i),
- data->ppr << 6);
+ err = max6639_set_ppr(data, i, ppr);
if (err)
- goto exit;
+ return err;
/* Fans config PWM, RPM */
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_FAN_CONFIG1(i),
- MAX6639_FAN_CONFIG1_PWM | rpm_range);
+ err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG1(i),
+ MAX6639_FAN_CONFIG1_PWM | rpm_range);
if (err)
- goto exit;
+ return err;
/* Fans PWM polarity high by default */
if (max6639_info && max6639_info->pwm_polarity == 0)
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_FAN_CONFIG2a(i), 0x00);
+ err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG2a(i), 0x00);
else
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_FAN_CONFIG2a(i), 0x02);
+ err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG2a(i), 0x02);
if (err)
- goto exit;
+ return err;
/*
* /THERM full speed enable,
* PWM frequency 25kHz, see also GCONFIG below
*/
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_FAN_CONFIG3(i),
- MAX6639_FAN_CONFIG3_THERM_FULL_SPEED | 0x03);
+ err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG3(i),
+ MAX6639_FAN_CONFIG3_THERM_FULL_SPEED | 0x03);
if (err)
- goto exit;
+ return err;
/* Max. temp. 80C/90C/100C */
- data->temp_therm[i] = 80;
- data->temp_alert[i] = 90;
- data->temp_ot[i] = 100;
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_THERM_LIMIT(i),
- data->temp_therm[i]);
+ err = regmap_write(data->regmap, MAX6639_REG_THERM_LIMIT(i), 80);
if (err)
- goto exit;
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_ALERT_LIMIT(i),
- data->temp_alert[i]);
+ return err;
+ err = regmap_write(data->regmap, MAX6639_REG_ALERT_LIMIT(i), 90);
if (err)
- goto exit;
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_OT_LIMIT(i), data->temp_ot[i]);
+ return err;
+ err = regmap_write(data->regmap, MAX6639_REG_OT_LIMIT(i), 100);
if (err)
- goto exit;
+ return err;
/* PWM 120/120 (i.e. 100%) */
- data->pwm[i] = 120;
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_TARGTDUTY(i), data->pwm[i]);
+ err = regmap_write(data->regmap, MAX6639_REG_TARGTDUTY(i), 120);
if (err)
- goto exit;
+ return err;
}
/* Start monitoring */
- err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
- MAX6639_GCONFIG_DISABLE_TIMEOUT | MAX6639_GCONFIG_CH2_LOCAL |
- MAX6639_GCONFIG_PWM_FREQ_HI);
-exit:
- return err;
+ return regmap_write(data->regmap, MAX6639_REG_GCONFIG,
+ MAX6639_GCONFIG_DISABLE_TIMEOUT | MAX6639_GCONFIG_CH2_LOCAL |
+ MAX6639_GCONFIG_PWM_FREQ_HI);
+
}
/* Return 0 if detection is successful, -ENODEV otherwise */
@@ -524,6 +465,32 @@ static void max6639_regulator_disable(void *data)
regulator_disable(data);
}
+static bool max6639_regmap_is_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case MAX6639_REG_TEMP(0):
+ case MAX6639_REG_TEMP_EXT(0):
+ case MAX6639_REG_TEMP(1):
+ case MAX6639_REG_TEMP_EXT(1):
+ case MAX6639_REG_STATUS:
+ case MAX6639_REG_FAN_CNT(0):
+ case MAX6639_REG_FAN_CNT(1):
+ case MAX6639_REG_TARGTDUTY(0):
+ case MAX6639_REG_TARGTDUTY(1):
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config max6639_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX6639_REG_DEVREV,
+ .cache_type = REGCACHE_MAPLE,
+ .volatile_reg = max6639_regmap_is_volatile,
+};
+
static int max6639_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
@@ -535,7 +502,11 @@ static int max6639_probe(struct i2c_client *client)
if (!data)
return -ENOMEM;
- data->client = client;
+ data->regmap = devm_regmap_init_i2c(client, &max6639_regmap_config);
+ if (IS_ERR(data->regmap))
+ return dev_err_probe(dev,
+ PTR_ERR(data->regmap),
+ "regmap initialization failed\n");
data->reg = devm_regulator_get_optional(dev, "fan");
if (IS_ERR(data->reg)) {
@@ -558,8 +529,6 @@ static int max6639_probe(struct i2c_client *client)
}
}
- mutex_init(&data->update_lock);
-
/* Initialize the max6639 chip */
err = max6639_init_client(client, data);
if (err < 0)
@@ -573,23 +542,17 @@ static int max6639_probe(struct i2c_client *client)
static int max6639_suspend(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
struct max6639_data *data = dev_get_drvdata(dev);
- int ret = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG);
-
- if (ret < 0)
- return ret;
if (data->reg)
regulator_disable(data->reg);
- return i2c_smbus_write_byte_data(client,
- MAX6639_REG_GCONFIG, ret | MAX6639_GCONFIG_STANDBY);
+ return regmap_write_bits(data->regmap, MAX6639_REG_GCONFIG, MAX6639_GCONFIG_STANDBY,
+ MAX6639_GCONFIG_STANDBY);
}
static int max6639_resume(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
struct max6639_data *data = dev_get_drvdata(dev);
int ret;
@@ -601,16 +564,12 @@ static int max6639_resume(struct device *dev)
}
}
- ret = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG);
- if (ret < 0)
- return ret;
-
- return i2c_smbus_write_byte_data(client,
- MAX6639_REG_GCONFIG, ret & ~MAX6639_GCONFIG_STANDBY);
+ return regmap_write_bits(data->regmap, MAX6639_REG_GCONFIG, MAX6639_GCONFIG_STANDBY,
+ ~MAX6639_GCONFIG_STANDBY);
}
static const struct i2c_device_id max6639_id[] = {
- {"max6639", 0},
+ {"max6639"},
{ }
};
diff --git a/drivers/hwmon/max6642.c b/drivers/hwmon/max6642.c
index 8b2e4d6101a2..9302ab233910 100644
--- a/drivers/hwmon/max6642.c
+++ b/drivers/hwmon/max6642.c
@@ -291,7 +291,7 @@ static int max6642_probe(struct i2c_client *client)
*/
static const struct i2c_device_id max6642_id[] = {
- { "max6642", 0 },
+ { "max6642" },
{ }
};
MODULE_DEVICE_TABLE(i2c, max6642_id);
diff --git a/drivers/hwmon/mc34vr500.c b/drivers/hwmon/mc34vr500.c
index 0c8fd3fce83e..84458e4533d8 100644
--- a/drivers/hwmon/mc34vr500.c
+++ b/drivers/hwmon/mc34vr500.c
@@ -235,7 +235,7 @@ static int mc34vr500_probe(struct i2c_client *client)
}
static const struct i2c_device_id mc34vr500_id[] = {
- { "mc34vr500", 0 },
+ { "mc34vr500" },
{ },
};
MODULE_DEVICE_TABLE(i2c, mc34vr500_id);
diff --git a/drivers/hwmon/nct7802.c b/drivers/hwmon/nct7802.c
index a0e664d5ebfe..97e8c6424403 100644
--- a/drivers/hwmon/nct7802.c
+++ b/drivers/hwmon/nct7802.c
@@ -1212,7 +1212,7 @@ static const unsigned short nct7802_address_list[] = {
};
static const struct i2c_device_id nct7802_idtable[] = {
- { "nct7802", 0 },
+ { "nct7802" },
{ }
};
MODULE_DEVICE_TABLE(i2c, nct7802_idtable);
diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
index 8f867d4570e1..f1e6eda949ba 100644
--- a/drivers/hwmon/nct7904.c
+++ b/drivers/hwmon/nct7904.c
@@ -1161,7 +1161,7 @@ static int nct7904_probe(struct i2c_client *client)
}
static const struct i2c_device_id nct7904_id[] = {
- {"nct7904", 0},
+ {"nct7904"},
{}
};
MODULE_DEVICE_TABLE(i2c, nct7904_id);
diff --git a/drivers/hwmon/npcm750-pwm-fan.c b/drivers/hwmon/npcm750-pwm-fan.c
index 904816abb7c4..bc8db1dc595d 100644
--- a/drivers/hwmon/npcm750-pwm-fan.c
+++ b/drivers/hwmon/npcm750-pwm-fan.c
@@ -196,8 +196,6 @@ struct npcm7xx_pwm_fan_data {
void __iomem *pwm_base;
void __iomem *fan_base;
int pwm_modules;
- unsigned long pwm_clk_freq;
- unsigned long fan_clk_freq;
struct clk *pwm_clk;
struct clk *fan_clk;
struct mutex pwm_lock[NPCM7XX_PWM_MAX_MODULES];
@@ -692,11 +690,12 @@ static u32 npcm7xx_pwm_init(struct npcm7xx_pwm_fan_data *data)
{
int m, ch;
u32 prescale_val, output_freq;
+ unsigned long pwm_clk_freq;
- data->pwm_clk_freq = clk_get_rate(data->pwm_clk);
+ pwm_clk_freq = clk_get_rate(data->pwm_clk);
/* Adjust NPCM7xx PWMs output frequency to ~25Khz */
- output_freq = data->pwm_clk_freq / PWN_CNT_DEFAULT;
+ output_freq = pwm_clk_freq / PWN_CNT_DEFAULT;
prescale_val = DIV_ROUND_CLOSEST(output_freq, PWM_OUTPUT_FREQ_25KHZ);
/* If prescale_val = 0, then the prescale output clock is stopped */
diff --git a/drivers/hwmon/nzxt-kraken3.c b/drivers/hwmon/nzxt-kraken3.c
index 5806a3f32bcb..00f3ac90a290 100644
--- a/drivers/hwmon/nzxt-kraken3.c
+++ b/drivers/hwmon/nzxt-kraken3.c
@@ -1,8 +1,8 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * hwmon driver for NZXT Kraken X53/X63/X73 and Z53/Z63/Z73 all in one coolers.
- * X53 and Z53 in code refer to all models in their respective series (shortened
- * for brevity).
+ * hwmon driver for NZXT Kraken X53/X63/X73, Z53/Z63/Z73 and 2023/2023 Elite all in one coolers.
+ * X53 and Z53 in code refer to all models in their respective series (shortened for brevity).
+ * 2023 models use the Z53 code paths.
*
* Copyright 2021 Jonas Malaco <jonas@protocubo.io>
* Copyright 2022 Aleksa Savic <savicaleksa83@gmail.com>
@@ -23,15 +23,12 @@
#define USB_PRODUCT_ID_X53 0x2007
#define USB_PRODUCT_ID_X53_SECOND 0x2014
#define USB_PRODUCT_ID_Z53 0x3008
+#define USB_PRODUCT_ID_KRAKEN2023 0x300E
+#define USB_PRODUCT_ID_KRAKEN2023_ELITE 0x300C
-enum kinds { X53, Z53 } __packed;
+enum kinds { X53, Z53, KRAKEN2023 } __packed;
enum pwm_enable { off, manual, curve } __packed;
-static const char *const kraken3_device_names[] = {
- [X53] = "x53",
- [Z53] = "z53",
-};
-
#define DRIVER_NAME "nzxt_kraken3"
#define STATUS_REPORT_ID 0x75
#define FIRMWARE_REPORT_ID 0x11
@@ -141,6 +138,7 @@ static umode_t kraken3_is_visible(const void *data, enum hwmon_sensor_types type
return 0444;
break;
case Z53:
+ case KRAKEN2023:
/* Pump and fan */
if (channel < 2)
return 0444;
@@ -160,6 +158,7 @@ static umode_t kraken3_is_visible(const void *data, enum hwmon_sensor_types type
return 0644;
break;
case Z53:
+ case KRAKEN2023:
/* Pump and fan */
if (channel < 2)
return 0644;
@@ -247,6 +246,7 @@ static int kraken3_read_x53(struct kraken3_data *priv)
return 0;
}
+/* Covers Z53 and KRAKEN2023 device kinds */
static int kraken3_read_z53(struct kraken3_data *priv)
{
int ret = mutex_lock_interruptible(&priv->z53_status_request_lock);
@@ -360,6 +360,13 @@ static int kraken3_write_curve(struct kraken3_data *priv, u8 *curve_array, int c
/* Set the correct ID for writing pump/fan duty (0x01 or 0x02, respectively) */
fixed_duty_cmd[SET_DUTY_ID_OFFSET] = channel + 1;
+ if (priv->kind == KRAKEN2023) {
+ /* These require 1s in the next one or two slots after SET_DUTY_ID_OFFSET */
+ fixed_duty_cmd[SET_DUTY_ID_OFFSET + 1] = 1;
+ if (channel == 1) /* Fan */
+ fixed_duty_cmd[SET_DUTY_ID_OFFSET + 2] = 1;
+ }
+
/* Copy curve to command */
memcpy(fixed_duty_cmd + SET_CURVE_DUTY_CMD_HEADER_LENGTH, curve_array, CUSTOM_CURVE_POINTS);
@@ -507,8 +514,8 @@ static umode_t kraken3_curve_props_are_visible(struct kobject *kobj, struct attr
struct device *dev = kobj_to_dev(kobj);
struct kraken3_data *priv = dev_get_drvdata(dev);
- /* Only Z53 has the fan curve */
- if (index >= CUSTOM_CURVE_POINTS && priv->kind != Z53)
+ /* X53 does not have a fan */
+ if (index >= CUSTOM_CURVE_POINTS && priv->kind == X53)
return 0;
return attr->mode;
@@ -774,8 +781,8 @@ static int kraken3_raw_event(struct hid_device *hdev, struct hid_report *report,
if (priv->kind == X53 && !completion_done(&priv->status_report_processed)) {
/* Mark first X-series device report as received */
complete_all(&priv->status_report_processed);
- } else if (priv->kind == Z53) {
- /* Additional readings for Z53 */
+ } else if (priv->kind == Z53 || priv->kind == KRAKEN2023) {
+ /* Additional readings for Z53 and KRAKEN2023 */
priv->fan_input[1] = get_unaligned_le16(data + Z53_FAN_SPEED_OFFSET);
priv->channel_info[1].reported_duty =
kraken3_percent_to_pwm(data[Z53_FAN_DUTY_OFFSET]);
@@ -849,14 +856,14 @@ static int firmware_version_show(struct seq_file *seqf, void *unused)
}
DEFINE_SHOW_ATTRIBUTE(firmware_version);
-static void kraken3_debugfs_init(struct kraken3_data *priv)
+static void kraken3_debugfs_init(struct kraken3_data *priv, const char *device_name)
{
char name[64];
if (!priv->firmware_version[0])
return; /* Nothing to display in debugfs */
- scnprintf(name, sizeof(name), "%s_%s-%s", DRIVER_NAME, kraken3_device_names[priv->kind],
+ scnprintf(name, sizeof(name), "%s_%s-%s", DRIVER_NAME, device_name,
dev_name(&priv->hdev->dev));
priv->debugfs = debugfs_create_dir(name, NULL);
@@ -866,6 +873,7 @@ static void kraken3_debugfs_init(struct kraken3_data *priv)
static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
struct kraken3_data *priv;
+ const char *device_name;
int ret;
priv = devm_kzalloc(&hdev->dev, sizeof(*priv), GFP_KERNEL);
@@ -905,12 +913,23 @@ static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id
case USB_PRODUCT_ID_X53:
case USB_PRODUCT_ID_X53_SECOND:
priv->kind = X53;
+ device_name = "x53";
break;
case USB_PRODUCT_ID_Z53:
priv->kind = Z53;
+ device_name = "z53";
break;
- default:
+ case USB_PRODUCT_ID_KRAKEN2023:
+ priv->kind = KRAKEN2023;
+ device_name = "kraken2023";
+ break;
+ case USB_PRODUCT_ID_KRAKEN2023_ELITE:
+ priv->kind = KRAKEN2023;
+ device_name = "kraken2023elite";
break;
+ default:
+ ret = -ENODEV;
+ goto fail_and_close;
}
priv->buffer = devm_kzalloc(&hdev->dev, MAX_REPORT_LENGTH, GFP_KERNEL);
@@ -936,8 +955,7 @@ static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id
if (ret < 0)
hid_warn(hdev, "fw version request failed with %d\n", ret);
- priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev,
- kraken3_device_names[priv->kind], priv,
+ priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, device_name, priv,
&kraken3_chip_info, kraken3_groups);
if (IS_ERR(priv->hwmon_dev)) {
ret = PTR_ERR(priv->hwmon_dev);
@@ -945,7 +963,7 @@ static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id
goto fail_and_close;
}
- kraken3_debugfs_init(priv);
+ kraken3_debugfs_init(priv, device_name);
return 0;
@@ -972,6 +990,8 @@ static const struct hid_device_id kraken3_table[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_X53) },
{ HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_X53_SECOND) },
{ HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_Z53) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_KRAKEN2023) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_KRAKEN2023_ELITE) },
{ }
};
diff --git a/drivers/hwmon/pcf8591.c b/drivers/hwmon/pcf8591.c
index 66c76b28c9e0..167d2fe4d543 100644
--- a/drivers/hwmon/pcf8591.c
+++ b/drivers/hwmon/pcf8591.c
@@ -285,7 +285,7 @@ static int pcf8591_read_channel(struct device *dev, int channel)
}
static const struct i2c_device_id pcf8591_id[] = {
- { "pcf8591", 0 },
+ { "pcf8591" },
{ }
};
MODULE_DEVICE_TABLE(i2c, pcf8591_id);
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 557ae0c414b0..08e82c457356 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -51,12 +51,22 @@ config SENSORS_ADM1275
tristate "Analog Devices ADM1275 and compatibles"
help
If you say yes here you get hardware monitoring support for Analog
- Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293,
- and ADM1294 Hot-Swap Controller and Digital Power Monitors.
+ Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1281,
+ ADM1293, and ADM1294 Hot-Swap Controller and Digital Power Monitors.
This driver can also be built as a module. If so, the module will
be called adm1275.
+config SENSORS_ADP1050
+ tristate "Analog Devices ADP1050 digital controller for Power Supplies"
+ help
+ If you say yes here you get hardware monitoring support for Analog
+ Devices ADP1050 digital controller for isolated power supply with
+ PMBus interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called adp1050.
+
config SENSORS_BEL_PFE
tristate "Bel PFE Compatible Power Supplies"
help
@@ -511,6 +521,15 @@ config SENSORS_UCD9200
This driver can also be built as a module. If so, the module will
be called ucd9200.
+config SENSORS_XDP710
+ tristate "Infineon XDP710 family"
+ help
+ If you say yes here you get hardware monitoring support for Infineon
+ XDP710.
+
+ This driver can also be built as a module. If so, the module will
+ be called xdp710.
+
config SENSORS_XDPE152
tristate "Infineon XDPE152 family"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index f14ecf03ad77..2279b3327bbf 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
obj-$(CONFIG_SENSORS_ACBEL_FSG032) += acbel-fsg032.o
obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
+obj-$(CONFIG_SENSORS_ADP1050) += adp1050.o
obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
obj-$(CONFIG_SENSORS_BPA_RS600) += bpa-rs600.o
obj-$(CONFIG_SENSORS_DELTA_AHE50DC_FAN) += delta-ahe50dc-fan.o
@@ -51,6 +52,7 @@ obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
obj-$(CONFIG_SENSORS_TPS546D24) += tps546d24.o
obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
+obj-$(CONFIG_SENSORS_XDP710) += xdp710.o
obj-$(CONFIG_SENSORS_XDPE122) += xdpe12284.o
obj-$(CONFIG_SENSORS_XDPE152) += xdpe152c4.o
obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index ed0a7b9fae4b..2c4d94cc8729 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -490,7 +490,7 @@ static const struct of_device_id adm1266_of_match[] = {
MODULE_DEVICE_TABLE(of, adm1266_of_match);
static const struct i2c_device_id adm1266_id[] = {
- { "adm1266", 0 },
+ { "adm1266" },
{ }
};
MODULE_DEVICE_TABLE(i2c, adm1266_id);
diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index e2c61d6fa521..59ffc08289bd 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -18,7 +18,7 @@
#include <linux/log2.h>
#include "pmbus.h"
-enum chips { adm1075, adm1272, adm1275, adm1276, adm1278, adm1293, adm1294 };
+enum chips { adm1075, adm1272, adm1275, adm1276, adm1278, adm1281, adm1293, adm1294 };
#define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0)
#define ADM1293_MFR_STATUS_VAUX_UV_WARN BIT(5)
@@ -482,6 +482,7 @@ static const struct i2c_device_id adm1275_id[] = {
{ "adm1275", adm1275 },
{ "adm1276", adm1276 },
{ "adm1278", adm1278 },
+ { "adm1281", adm1281 },
{ "adm1293", adm1293 },
{ "adm1294", adm1294 },
{ }
@@ -555,7 +556,8 @@ static int adm1275_probe(struct i2c_client *client)
client->name, mid->name);
if (mid->driver_data == adm1272 || mid->driver_data == adm1278 ||
- mid->driver_data == adm1293 || mid->driver_data == adm1294)
+ mid->driver_data == adm1281 || mid->driver_data == adm1293 ||
+ mid->driver_data == adm1294)
config_read_fn = i2c_smbus_read_word_data;
else
config_read_fn = i2c_smbus_read_byte_data;
@@ -703,6 +705,7 @@ static int adm1275_probe(struct i2c_client *client)
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
break;
case adm1278:
+ case adm1281:
data->have_vout = true;
data->have_pin_max = true;
data->have_temp_max = true;
diff --git a/drivers/hwmon/pmbus/adp1050.c b/drivers/hwmon/pmbus/adp1050.c
new file mode 100644
index 000000000000..20f22730fc01
--- /dev/null
+++ b/drivers/hwmon/pmbus/adp1050.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardware monitoring driver for Analog Devices ADP1050
+ *
+ * Copyright (C) 2024 Analog Devices, Inc.
+ */
+#include <linux/bits.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+
+#include "pmbus.h"
+
+static struct pmbus_driver_info adp1050_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = linear,
+ .format[PSC_CURRENT_IN] = linear,
+ .format[PSC_TEMPERATURE] = linear,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_IIN | PMBUS_HAVE_TEMP
+ | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int adp1050_probe(struct i2c_client *client)
+{
+ return pmbus_do_probe(client, &adp1050_info);
+}
+
+static const struct i2c_device_id adp1050_id[] = {
+ {"adp1050"},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, adp1050_id);
+
+static const struct of_device_id adp1050_of_match[] = {
+ { .compatible = "adi,adp1050"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, adp1050_of_match);
+
+static struct i2c_driver adp1050_driver = {
+ .driver = {
+ .name = "adp1050",
+ .of_match_table = adp1050_of_match,
+ },
+ .probe = adp1050_probe,
+ .id_table = adp1050_id,
+};
+module_i2c_driver(adp1050_driver);
+
+MODULE_AUTHOR("Radu Sabau <radu.sabau@analog.com>");
+MODULE_DESCRIPTION("Analog Devices ADP1050 HWMON PMBus Driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/inspur-ipsps.c b/drivers/hwmon/pmbus/inspur-ipsps.c
index dfeae68b5e52..3e3cc9a0f116 100644
--- a/drivers/hwmon/pmbus/inspur-ipsps.c
+++ b/drivers/hwmon/pmbus/inspur-ipsps.c
@@ -197,7 +197,7 @@ static int ipsps_probe(struct i2c_client *client)
}
static const struct i2c_device_id ipsps_id[] = {
- { "ipsps1", 0 },
+ { "ipsps1" },
{}
};
MODULE_DEVICE_TABLE(i2c, ipsps_id);
diff --git a/drivers/hwmon/pmbus/ir35221.c b/drivers/hwmon/pmbus/ir35221.c
index e3ee5c1bd967..503be59c6c7f 100644
--- a/drivers/hwmon/pmbus/ir35221.c
+++ b/drivers/hwmon/pmbus/ir35221.c
@@ -126,7 +126,7 @@ static int ir35221_probe(struct i2c_client *client)
}
static const struct i2c_device_id ir35221_id[] = {
- {"ir35221", 0},
+ {"ir35221"},
{}
};
diff --git a/drivers/hwmon/pmbus/ir36021.c b/drivers/hwmon/pmbus/ir36021.c
index a263afeb8ac1..5148c9187c9e 100644
--- a/drivers/hwmon/pmbus/ir36021.c
+++ b/drivers/hwmon/pmbus/ir36021.c
@@ -51,7 +51,7 @@ static int ir36021_probe(struct i2c_client *client)
}
static const struct i2c_device_id ir36021_id[] = {
- { "ir36021", 0 },
+ { "ir36021" },
{},
};
MODULE_DEVICE_TABLE(i2c, ir36021_id);
diff --git a/drivers/hwmon/pmbus/ir38064.c b/drivers/hwmon/pmbus/ir38064.c
index 69e18cb468f6..d4bcc9c39774 100644
--- a/drivers/hwmon/pmbus/ir38064.c
+++ b/drivers/hwmon/pmbus/ir38064.c
@@ -53,10 +53,10 @@ static int ir38064_probe(struct i2c_client *client)
}
static const struct i2c_device_id ir38064_id[] = {
- {"ir38060", 0},
- {"ir38064", 0},
- {"ir38164", 0},
- {"ir38263", 0},
+ {"ir38060"},
+ {"ir38064"},
+ {"ir38164"},
+ {"ir38263"},
{}
};
diff --git a/drivers/hwmon/pmbus/irps5401.c b/drivers/hwmon/pmbus/irps5401.c
index 146d32a35a7c..f0bdf55c95bf 100644
--- a/drivers/hwmon/pmbus/irps5401.c
+++ b/drivers/hwmon/pmbus/irps5401.c
@@ -44,7 +44,7 @@ static int irps5401_probe(struct i2c_client *client)
}
static const struct i2c_device_id irps5401_id[] = {
- {"irps5401", 0},
+ {"irps5401"},
{}
};
diff --git a/drivers/hwmon/pmbus/lt7182s.c b/drivers/hwmon/pmbus/lt7182s.c
index 28afc5f15ae8..aebd97af2741 100644
--- a/drivers/hwmon/pmbus/lt7182s.c
+++ b/drivers/hwmon/pmbus/lt7182s.c
@@ -168,7 +168,7 @@ static int lt7182s_probe(struct i2c_client *client)
}
static const struct i2c_device_id lt7182s_id[] = {
- { "lt7182s", 0 },
+ { "lt7182s" },
{}
};
MODULE_DEVICE_TABLE(i2c, lt7182s_id);
diff --git a/drivers/hwmon/pmbus/ltc3815.c b/drivers/hwmon/pmbus/ltc3815.c
index f2023b17aa8d..f58a8cedb0d7 100644
--- a/drivers/hwmon/pmbus/ltc3815.c
+++ b/drivers/hwmon/pmbus/ltc3815.c
@@ -143,7 +143,7 @@ static int ltc3815_write_word_data(struct i2c_client *client, int page,
}
static const struct i2c_device_id ltc3815_id[] = {
- {"ltc3815", 0},
+ {"ltc3815"},
{ }
};
MODULE_DEVICE_TABLE(i2c, ltc3815_id);
diff --git a/drivers/hwmon/pmbus/max15301.c b/drivers/hwmon/pmbus/max15301.c
index 2cfaa62aedd6..986404fe6a31 100644
--- a/drivers/hwmon/pmbus/max15301.c
+++ b/drivers/hwmon/pmbus/max15301.c
@@ -23,8 +23,8 @@
#include "pmbus.h"
static const struct i2c_device_id max15301_id[] = {
- {"bmr461", 0},
- {"max15301", 0},
+ { "bmr461" },
+ { "max15301" },
{}
};
MODULE_DEVICE_TABLE(i2c, max15301_id);
diff --git a/drivers/hwmon/pmbus/max16064.c b/drivers/hwmon/pmbus/max16064.c
index a573a0ab9e48..98e2b5dd5841 100644
--- a/drivers/hwmon/pmbus/max16064.c
+++ b/drivers/hwmon/pmbus/max16064.c
@@ -91,7 +91,7 @@ static int max16064_probe(struct i2c_client *client)
}
static const struct i2c_device_id max16064_id[] = {
- {"max16064", 0},
+ {"max16064"},
{}
};
diff --git a/drivers/hwmon/pmbus/max20751.c b/drivers/hwmon/pmbus/max20751.c
index 6ebd71cd081b..8f23c1eb559e 100644
--- a/drivers/hwmon/pmbus/max20751.c
+++ b/drivers/hwmon/pmbus/max20751.c
@@ -32,7 +32,7 @@ static int max20751_probe(struct i2c_client *client)
}
static const struct i2c_device_id max20751_id[] = {
- {"max20751", 0},
+ {"max20751"},
{}
};
diff --git a/drivers/hwmon/pmbus/max31785.c b/drivers/hwmon/pmbus/max31785.c
index 5d13bbfc8f47..09218dba8965 100644
--- a/drivers/hwmon/pmbus/max31785.c
+++ b/drivers/hwmon/pmbus/max31785.c
@@ -518,9 +518,9 @@ static int max31785_probe(struct i2c_client *client)
}
static const struct i2c_device_id max31785_id[] = {
- { "max31785", 0 },
- { "max31785a", 0 },
- { "max31785b", 0 },
+ { "max31785" },
+ { "max31785a" },
+ { "max31785b" },
{ },
};
diff --git a/drivers/hwmon/pmbus/max8688.c b/drivers/hwmon/pmbus/max8688.c
index ae8573fdf5ba..5d5b6aeefa80 100644
--- a/drivers/hwmon/pmbus/max8688.c
+++ b/drivers/hwmon/pmbus/max8688.c
@@ -171,7 +171,7 @@ static int max8688_probe(struct i2c_client *client)
}
static const struct i2c_device_id max8688_id[] = {
- {"max8688", 0},
+ {"max8688"},
{ }
};
diff --git a/drivers/hwmon/pmbus/mp2888.c b/drivers/hwmon/pmbus/mp2888.c
index 50662ed8e3d5..3b45f126b611 100644
--- a/drivers/hwmon/pmbus/mp2888.c
+++ b/drivers/hwmon/pmbus/mp2888.c
@@ -378,7 +378,7 @@ static int mp2888_probe(struct i2c_client *client)
}
static const struct i2c_device_id mp2888_id[] = {
- {"mp2888", 0},
+ {"mp2888"},
{}
};
diff --git a/drivers/hwmon/pmbus/mp2975.c b/drivers/hwmon/pmbus/mp2975.c
index e5fa10b3b8bc..280bb12f762c 100644
--- a/drivers/hwmon/pmbus/mp2975.c
+++ b/drivers/hwmon/pmbus/mp2975.c
@@ -5,12 +5,14 @@
* Copyright (C) 2020 Nvidia Technologies Ltd.
*/
+#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
-#include <linux/of_device.h>
+
#include "pmbus.h"
/* Vendor specific registers. */
@@ -97,6 +99,11 @@ static const int mp2975_max_phases[][MP2975_PAGE_NUM] = {
[mp2971] = { MP2971_MAX_PHASE_RAIL1, MP2971_MAX_PHASE_RAIL2 },
};
+struct mp2975_driver_info {
+ const struct pmbus_driver_info *info;
+ enum chips chip_id;
+};
+
struct mp2975_data {
struct pmbus_driver_info info;
enum chips chip_id;
@@ -110,15 +117,6 @@ struct mp2975_data {
int curr_sense_gain[MP2975_PAGE_NUM];
};
-static const struct i2c_device_id mp2975_id[] = {
- {"mp2971", mp2971},
- {"mp2973", mp2973},
- {"mp2975", mp2975},
- {}
-};
-
-MODULE_DEVICE_TABLE(i2c, mp2975_id);
-
static const struct regulator_desc __maybe_unused mp2975_reg_desc[] = {
PMBUS_REGULATOR("vout", 0),
PMBUS_REGULATOR("vout", 1),
@@ -392,6 +390,80 @@ static int mp2973_read_word_data(struct i2c_client *client, int page,
return ret;
}
+static int mp2973_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ u8 target, mask;
+ long ret;
+
+ if (reg != PMBUS_SMBALERT_MASK)
+ return -ENODATA;
+
+ /*
+ * Vendor-specific SMBALERT_MASK register with 16 maskable bits.
+ */
+ ret = pmbus_read_word_data(client, 0, 0, PMBUS_SMBALERT_MASK);
+ if (ret < 0)
+ return ret;
+
+ target = word & 0xff;
+ mask = word >> 8;
+
+/*
+ * Set/Clear 'bit' in 'ret' based on condition followed by define for each bit in SMBALERT_MASK.
+ * Also bit 2 & 15 are reserved.
+ */
+
+#define MP2973_TEMP_OT 0
+#define MP2973_VIN_UVLO 1
+#define MP2973_VIN_OVP 3
+#define MP2973_MTP_FAULT 4
+#define MP2973_OTHER_COMM 5
+#define MP2973_MTP_BLK_TRIG 6
+#define MP2973_PACKET_ERROR 7
+#define MP2973_INVALID_DATA 8
+#define MP2973_INVALID_COMMAND 9
+#define MP2973_IOUT_OC_LV 10
+#define MP2973_IOUT_OC 11
+#define MP2973_VOUT_MAX_MIN_WARNING 12
+#define MP2973_VOLTAGE_UV 13
+#define MP2973_VOLTAGE_OV 14
+
+ switch (target) {
+ case PMBUS_STATUS_CML:
+ __assign_bit(MP2973_INVALID_DATA, &ret, !(mask & PB_CML_FAULT_INVALID_DATA));
+ __assign_bit(MP2973_INVALID_COMMAND, &ret, !(mask & PB_CML_FAULT_INVALID_COMMAND));
+ __assign_bit(MP2973_OTHER_COMM, &ret, !(mask & PB_CML_FAULT_OTHER_COMM));
+ __assign_bit(MP2973_PACKET_ERROR, &ret, !(mask & PB_CML_FAULT_PACKET_ERROR));
+ break;
+ case PMBUS_STATUS_VOUT:
+ __assign_bit(MP2973_VOLTAGE_UV, &ret, !(mask & PB_VOLTAGE_UV_FAULT));
+ __assign_bit(MP2973_VOLTAGE_OV, &ret, !(mask & PB_VOLTAGE_OV_FAULT));
+ break;
+ case PMBUS_STATUS_IOUT:
+ __assign_bit(MP2973_IOUT_OC, &ret, !(mask & PB_IOUT_OC_FAULT));
+ __assign_bit(MP2973_IOUT_OC_LV, &ret, !(mask & PB_IOUT_OC_LV_FAULT));
+ break;
+ case PMBUS_STATUS_TEMPERATURE:
+ __assign_bit(MP2973_TEMP_OT, &ret, !(mask & PB_TEMP_OT_FAULT));
+ break;
+ /*
+ * Map remaining bits to MFR specific to let the PMBUS core mask
+ * those bits by default.
+ */
+ case PMBUS_STATUS_MFR_SPECIFIC:
+ __assign_bit(MP2973_VIN_UVLO, &ret, !(mask & BIT(1)));
+ __assign_bit(MP2973_VIN_OVP, &ret, !(mask & BIT(3)));
+ __assign_bit(MP2973_MTP_FAULT, &ret, !(mask & BIT(4)));
+ __assign_bit(MP2973_MTP_BLK_TRIG, &ret, !(mask & BIT(6)));
+ break;
+ default:
+ return 0;
+ }
+
+ return pmbus_write_word_data(client, 0, PMBUS_SMBALERT_MASK, ret);
+}
+
static int mp2975_read_word_data(struct i2c_client *client, int page,
int phase, int reg)
{
@@ -867,7 +939,7 @@ mp2975_vout_per_rail_config_get(struct i2c_client *client,
return 0;
}
-static struct pmbus_driver_info mp2975_info = {
+static const struct pmbus_driver_info mp2975_info = {
.pages = 1,
.format[PSC_VOLTAGE_IN] = linear,
.format[PSC_VOLTAGE_OUT] = direct,
@@ -892,7 +964,7 @@ static struct pmbus_driver_info mp2975_info = {
#endif
};
-static struct pmbus_driver_info mp2973_info = {
+static const struct pmbus_driver_info mp2973_info = {
.pages = 1,
.format[PSC_VOLTAGE_IN] = linear,
.format[PSC_VOLTAGE_OUT] = direct,
@@ -907,35 +979,41 @@ static struct pmbus_driver_info mp2973_info = {
PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT |
PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
.read_word_data = mp2973_read_word_data,
+ .write_word_data = mp2973_write_word_data,
#if IS_ENABLED(CONFIG_SENSORS_MP2975_REGULATOR)
.num_regulators = 1,
.reg_desc = mp2975_reg_desc,
#endif
};
+static const struct mp2975_driver_info mp2975_ddinfo[] = {
+ [mp2975] = { .info = &mp2975_info, .chip_id = mp2975 },
+ [mp2973] = { .info = &mp2973_info, .chip_id = mp2973 },
+ [mp2971] = { .info = &mp2973_info, .chip_id = mp2971 },
+};
+
static int mp2975_probe(struct i2c_client *client)
{
+ const struct mp2975_driver_info *ddinfo;
struct pmbus_driver_info *info;
struct mp2975_data *data;
int ret;
+ ddinfo = i2c_get_match_data(client);
+ if (!ddinfo)
+ return -ENODEV;
+
data = devm_kzalloc(&client->dev, sizeof(struct mp2975_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
- if (client->dev.of_node)
- data->chip_id = (enum chips)(unsigned long)of_device_get_match_data(&client->dev);
- else
- data->chip_id = i2c_match_id(mp2975_id, client)->driver_data;
+ data->chip_id = ddinfo->chip_id;
memcpy(data->max_phases, mp2975_max_phases[data->chip_id],
sizeof(data->max_phases));
- if (data->chip_id == mp2975)
- memcpy(&data->info, &mp2975_info, sizeof(*info));
- else
- memcpy(&data->info, &mp2973_info, sizeof(*info));
+ memcpy(&data->info, ddinfo->info, sizeof(data->info));
info = &data->info;
@@ -993,18 +1071,26 @@ static int mp2975_probe(struct i2c_client *client)
return pmbus_do_probe(client, info);
}
-static const struct of_device_id __maybe_unused mp2975_of_match[] = {
- {.compatible = "mps,mp2971", .data = (void *)mp2971},
- {.compatible = "mps,mp2973", .data = (void *)mp2973},
- {.compatible = "mps,mp2975", .data = (void *)mp2975},
+static const struct of_device_id mp2975_of_match[] = {
+ {.compatible = "mps,mp2971", .data = &mp2975_ddinfo[mp2971]},
+ {.compatible = "mps,mp2973", .data = &mp2975_ddinfo[mp2973]},
+ {.compatible = "mps,mp2975", .data = &mp2975_ddinfo[mp2975]},
{}
};
MODULE_DEVICE_TABLE(of, mp2975_of_match);
+static const struct i2c_device_id mp2975_id[] = {
+ {"mp2971", (kernel_ulong_t)&mp2975_ddinfo[mp2971]},
+ {"mp2973", (kernel_ulong_t)&mp2975_ddinfo[mp2973]},
+ {"mp2975", (kernel_ulong_t)&mp2975_ddinfo[mp2975]},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, mp2975_id);
+
static struct i2c_driver mp2975_driver = {
.driver = {
.name = "mp2975",
- .of_match_table = of_match_ptr(mp2975_of_match),
+ .of_match_table = mp2975_of_match,
},
.probe = mp2975_probe,
.id_table = mp2975_id,
diff --git a/drivers/hwmon/pmbus/mp5990.c b/drivers/hwmon/pmbus/mp5990.c
index 1dfbab25a064..5d1d5eac89da 100644
--- a/drivers/hwmon/pmbus/mp5990.c
+++ b/drivers/hwmon/pmbus/mp5990.c
@@ -158,7 +158,7 @@ static const struct of_device_id mp5990_of_match[] = {
};
static const struct i2c_device_id mp5990_id[] = {
- {"mp5990", 0},
+ {"mp5990"},
{ }
};
MODULE_DEVICE_TABLE(i2c, mp5990_id);
diff --git a/drivers/hwmon/pmbus/mpq8785.c b/drivers/hwmon/pmbus/mpq8785.c
index 4e2549cc8120..7f87e117b49d 100644
--- a/drivers/hwmon/pmbus/mpq8785.c
+++ b/drivers/hwmon/pmbus/mpq8785.c
@@ -62,7 +62,7 @@ static int mpq8785_probe(struct i2c_client *client)
};
static const struct i2c_device_id mpq8785_id[] = {
- { "mpq8785", 0 },
+ { "mpq8785" },
{ },
};
MODULE_DEVICE_TABLE(i2c, mpq8785_id);
diff --git a/drivers/hwmon/pmbus/pli1209bc.c b/drivers/hwmon/pmbus/pli1209bc.c
index c95433790b11..2c6c9ec2a652 100644
--- a/drivers/hwmon/pmbus/pli1209bc.c
+++ b/drivers/hwmon/pmbus/pli1209bc.c
@@ -141,7 +141,7 @@ static int pli1209bc_probe(struct i2c_client *client)
}
static const struct i2c_device_id pli1209bc_id[] = {
- {"pli1209bc", 0},
+ {"pli1209bc"},
{}
};
diff --git a/drivers/hwmon/pmbus/pm6764tr.c b/drivers/hwmon/pmbus/pm6764tr.c
index 2a16504c85b7..23f15b608dcf 100644
--- a/drivers/hwmon/pmbus/pm6764tr.c
+++ b/drivers/hwmon/pmbus/pm6764tr.c
@@ -48,7 +48,7 @@ static int pm6764tr_probe(struct i2c_client *client)
}
static const struct i2c_device_id pm6764tr_id[] = {
- {"pm6764tr", 0},
+ {"pm6764tr"},
{}
};
MODULE_DEVICE_TABLE(i2c, pm6764tr_id);
diff --git a/drivers/hwmon/pmbus/pxe1610.c b/drivers/hwmon/pmbus/pxe1610.c
index e2790a682dc8..5ac476d3cdd2 100644
--- a/drivers/hwmon/pmbus/pxe1610.c
+++ b/drivers/hwmon/pmbus/pxe1610.c
@@ -127,9 +127,9 @@ static int pxe1610_probe(struct i2c_client *client)
}
static const struct i2c_device_id pxe1610_id[] = {
- {"pxe1610", 0},
- {"pxe1110", 0},
- {"pxm1310", 0},
+ {"pxe1610"},
+ {"pxe1110"},
+ {"pxm1310"},
{}
};
diff --git a/drivers/hwmon/pmbus/stpddc60.c b/drivers/hwmon/pmbus/stpddc60.c
index be9076dcc2db..34d0f06f4845 100644
--- a/drivers/hwmon/pmbus/stpddc60.c
+++ b/drivers/hwmon/pmbus/stpddc60.c
@@ -18,8 +18,8 @@
#define STPDDC60_MFR_UV_LIMIT_OFFSET 0xe6
static const struct i2c_device_id stpddc60_id[] = {
- {"stpddc60", 0},
- {"bmr481", 0},
+ {"stpddc60"},
+ {"bmr481"},
{}
};
MODULE_DEVICE_TABLE(i2c, stpddc60_id);
diff --git a/drivers/hwmon/pmbus/tda38640.c b/drivers/hwmon/pmbus/tda38640.c
index c31889a036f0..044d5fbdf9eb 100644
--- a/drivers/hwmon/pmbus/tda38640.c
+++ b/drivers/hwmon/pmbus/tda38640.c
@@ -195,7 +195,7 @@ static int tda38640_probe(struct i2c_client *client)
}
static const struct i2c_device_id tda38640_id[] = {
- {"tda38640", 0},
+ {"tda38640"},
{}
};
MODULE_DEVICE_TABLE(i2c, tda38640_id);
diff --git a/drivers/hwmon/pmbus/tps40422.c b/drivers/hwmon/pmbus/tps40422.c
index ea0074a6b9fc..d99b9850ea36 100644
--- a/drivers/hwmon/pmbus/tps40422.c
+++ b/drivers/hwmon/pmbus/tps40422.c
@@ -31,7 +31,7 @@ static int tps40422_probe(struct i2c_client *client)
}
static const struct i2c_device_id tps40422_id[] = {
- {"tps40422", 0},
+ {"tps40422"},
{}
};
diff --git a/drivers/hwmon/pmbus/tps546d24.c b/drivers/hwmon/pmbus/tps546d24.c
index 69bbdb6c680b..520ca37269f7 100644
--- a/drivers/hwmon/pmbus/tps546d24.c
+++ b/drivers/hwmon/pmbus/tps546d24.c
@@ -42,7 +42,7 @@ static int tps546d24_probe(struct i2c_client *client)
}
static const struct i2c_device_id tps546d24_id[] = {
- {"tps546d24", 0},
+ {"tps546d24"},
{}
};
MODULE_DEVICE_TABLE(i2c, tps546d24_id);
diff --git a/drivers/hwmon/pmbus/xdp710.c b/drivers/hwmon/pmbus/xdp710.c
new file mode 100644
index 000000000000..dd107e83f612
--- /dev/null
+++ b/drivers/hwmon/pmbus/xdp710.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Infineon XDP710 Hot-Swap Controller
+ */
+
+#include <linux/bitops.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include "pmbus.h"
+
+#define XDP710_REG_CFG 0xD3
+#define XDP710_V_SNS_CFG 0xD4
+#define XDP710_CS_RNG 0xD5
+
+/*
+ * The table to map configuration register values
+ * to sense resistor values
+ */
+static const int micro_ohm_rsense[] = {
+ 200, 250, 300, 330, 400, 470, 500, 600,
+ 670, 700, 750, 800, 900, 1000, 1100, 1200,
+ 1250, 1300, 1400, 1500, 1600, 1700, 1800, 1900,
+ 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700,
+ 2800, 3000, 3100, 3200, 3300, 3400, 3500, 3600,
+ 3700, 3800, 3900, 4000, 4100, 4200, 4300, 4400,
+ 4500, 4600, 4700, 4800, 4900, 5000, 5500, 6000,
+ 6500, 7000, 7500, 8000, 8500, 9000, 9500, 10000
+};
+
+static struct pmbus_driver_info xdp710_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = direct,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_CURRENT_OUT] = direct,
+ .format[PSC_POWER] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_VOLTAGE_IN] = 4653,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = -2,
+ .m[PSC_VOLTAGE_OUT] = 4653,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = -2,
+ .m[PSC_CURRENT_OUT] = 23165,
+ .b[PSC_CURRENT_OUT] = 0,
+ .R[PSC_CURRENT_OUT] = -2,
+ .m[PSC_POWER] = 4211,
+ .b[PSC_POWER] = 0,
+ .R[PSC_POWER] = -2,
+ .m[PSC_TEMPERATURE] = 52,
+ .b[PSC_TEMPERATURE] = 14321,
+ .R[PSC_TEMPERATURE] = -1,
+ .func[0] =
+ PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_PIN |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_IOUT |
+ PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int xdp710_probe(struct i2c_client *client)
+{
+ struct pmbus_driver_info *info;
+ u8 cs_rng;
+ u8 vtlm_rng;
+ int rsense;
+ int ret;
+ int m = 0;
+
+ info = devm_kmemdup(&client->dev, &xdp710_info, sizeof(*info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ ret = i2c_smbus_read_word_data(client, XDP710_CS_RNG);
+ if (ret < 0) {
+ dev_err(&client->dev, "Can't get CS_RNG");
+ return ret;
+ }
+ cs_rng = (ret >> 6) & GENMASK(1, 0);
+
+ ret = i2c_smbus_read_word_data(client, XDP710_V_SNS_CFG);
+ if (ret < 0) {
+ dev_err(&client->dev, "Can't get V_SNS_CFG");
+ return ret;
+ }
+ vtlm_rng = ret & GENMASK(1, 0);
+
+ ret = i2c_smbus_read_word_data(client, XDP710_REG_CFG);
+ if (ret < 0) {
+ dev_err(&client->dev, "Can't get REG_CFG");
+ return ret;
+ }
+ ret &= GENMASK(5, 0);
+ rsense = micro_ohm_rsense[ret];
+
+ info->m[PSC_VOLTAGE_IN] <<= vtlm_rng;
+ info->m[PSC_VOLTAGE_OUT] <<= vtlm_rng;
+
+ m = info->m[PSC_CURRENT_OUT];
+ info->m[PSC_CURRENT_OUT] = DIV_ROUND_CLOSEST(m * rsense >> cs_rng, 1000);
+
+ m = info->m[PSC_POWER];
+ info->m[PSC_POWER] = DIV_ROUND_CLOSEST(m * rsense >> cs_rng, 1000);
+
+ return pmbus_do_probe(client, info);
+}
+
+static const struct of_device_id xdp710_of_match[] = {
+ { .compatible = "infineon,xdp710" },
+ {}
+};
+
+static const struct i2c_device_id xdp710_id[] = {
+ {"xdp710"},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, xdp710_id);
+
+static struct i2c_driver xdp710_driver = {
+ .driver = {
+ .name = "xdp710",
+ .of_match_table = xdp710_of_match,
+ },
+ .probe = xdp710_probe,
+ .id_table = xdp710_id,
+};
+module_i2c_driver(xdp710_driver);
+
+MODULE_AUTHOR("Peter Yin <peter.yin@quantatw.com>");
+MODULE_DESCRIPTION("PMBus driver for XDP710 HSC");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/xdpe12284.c b/drivers/hwmon/pmbus/xdpe12284.c
index 37d08dd427d5..facb1201aa43 100644
--- a/drivers/hwmon/pmbus/xdpe12284.c
+++ b/drivers/hwmon/pmbus/xdpe12284.c
@@ -164,9 +164,9 @@ static int xdpe122_probe(struct i2c_client *client)
}
static const struct i2c_device_id xdpe122_id[] = {
- {"xdpe11280", 0},
- {"xdpe12254", 0},
- {"xdpe12284", 0},
+ {"xdpe11280"},
+ {"xdpe12254"},
+ {"xdpe12284"},
{}
};
diff --git a/drivers/hwmon/pmbus/xdpe152c4.c b/drivers/hwmon/pmbus/xdpe152c4.c
index 235e6b41ae4c..7f3b31d4f033 100644
--- a/drivers/hwmon/pmbus/xdpe152c4.c
+++ b/drivers/hwmon/pmbus/xdpe152c4.c
@@ -44,8 +44,8 @@ static int xdpe152_probe(struct i2c_client *client)
}
static const struct i2c_device_id xdpe152_id[] = {
- {"xdpe152c4", 0},
- {"xdpe15284", 0},
+ {"xdpe152c4"},
+ {"xdpe15284"},
{}
};
diff --git a/drivers/hwmon/pt5161l.c b/drivers/hwmon/pt5161l.c
index 60361e39c474..b0d58a26d499 100644
--- a/drivers/hwmon/pt5161l.c
+++ b/drivers/hwmon/pt5161l.c
@@ -630,7 +630,7 @@ static const struct acpi_device_id __maybe_unused pt5161l_acpi_match[] = {
MODULE_DEVICE_TABLE(acpi, pt5161l_acpi_match);
static const struct i2c_device_id pt5161l_id[] = {
- { "pt5161l", 0 },
+ { "pt5161l" },
{}
};
MODULE_DEVICE_TABLE(i2c, pt5161l_id);
diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index b67bc9e833c0..a1712649b07e 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -9,10 +9,11 @@
#include <linux/hwmon.h>
#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/pwm.h>
#include <linux/regulator/consumer.h>
#include <linux/sysfs.h>
@@ -25,7 +26,6 @@ struct pwm_fan_tach {
int irq;
atomic_t pulses;
unsigned int rpm;
- u8 pulses_per_revolution;
};
enum pwm_fan_enable_mode {
@@ -48,6 +48,7 @@ struct pwm_fan_ctx {
int tach_count;
struct pwm_fan_tach *tachs;
+ u32 *pulses_per_revolution;
ktime_t sample_start;
struct timer_list rpm_timer;
@@ -85,7 +86,7 @@ static void sample_timer(struct timer_list *t)
pulses = atomic_read(&tach->pulses);
atomic_sub(pulses, &tach->pulses);
tach->rpm = (unsigned int)(pulses * 1000 * 60) /
- (tach->pulses_per_revolution * delta);
+ (ctx->pulses_per_revolution[i] * delta);
}
ctx->sample_start = ktime_get();
@@ -421,16 +422,14 @@ static const struct thermal_cooling_device_ops pwm_fan_cooling_ops = {
.set_cur_state = pwm_fan_set_cur_state,
};
-static int pwm_fan_of_get_cooling_data(struct device *dev,
- struct pwm_fan_ctx *ctx)
+static int pwm_fan_get_cooling_data(struct device *dev, struct pwm_fan_ctx *ctx)
{
- struct device_node *np = dev->of_node;
int num, i, ret;
- if (!of_property_present(np, "cooling-levels"))
+ if (!device_property_present(dev, "cooling-levels"))
return 0;
- ret = of_property_count_u32_elems(np, "cooling-levels");
+ ret = device_property_count_u32(dev, "cooling-levels");
if (ret <= 0) {
dev_err(dev, "Wrong data!\n");
return ret ? : -EINVAL;
@@ -442,8 +441,8 @@ static int pwm_fan_of_get_cooling_data(struct device *dev,
if (!ctx->pwm_fan_cooling_levels)
return -ENOMEM;
- ret = of_property_read_u32_array(np, "cooling-levels",
- ctx->pwm_fan_cooling_levels, num);
+ ret = device_property_read_u32_array(dev, "cooling-levels",
+ ctx->pwm_fan_cooling_levels, num);
if (ret) {
dev_err(dev, "Property 'cooling-levels' cannot be read!\n");
return ret;
@@ -562,6 +561,20 @@ static int pwm_fan_probe(struct platform_device *pdev)
if (!fan_channel_config)
return -ENOMEM;
ctx->fan_channel.config = fan_channel_config;
+
+ ctx->pulses_per_revolution = devm_kmalloc_array(dev,
+ ctx->tach_count,
+ sizeof(*ctx->pulses_per_revolution),
+ GFP_KERNEL);
+ if (!ctx->pulses_per_revolution)
+ return -ENOMEM;
+
+ /* Setup default pulses per revolution */
+ for (i = 0; i < ctx->tach_count; i++)
+ ctx->pulses_per_revolution[i] = 2;
+
+ device_property_read_u32_array(dev, "pulses-per-revolution",
+ ctx->pulses_per_revolution, ctx->tach_count);
}
channels = devm_kcalloc(dev, channel_count + 1,
@@ -573,7 +586,6 @@ static int pwm_fan_probe(struct platform_device *pdev)
for (i = 0; i < ctx->tach_count; i++) {
struct pwm_fan_tach *tach = &ctx->tachs[i];
- u32 ppr = 2;
tach->irq = platform_get_irq(pdev, i);
if (tach->irq == -EPROBE_DEFER)
@@ -589,12 +601,7 @@ static int pwm_fan_probe(struct platform_device *pdev)
}
}
- of_property_read_u32_index(dev->of_node,
- "pulses-per-revolution",
- i,
- &ppr);
- tach->pulses_per_revolution = ppr;
- if (!tach->pulses_per_revolution) {
+ if (!ctx->pulses_per_revolution[i]) {
dev_err(dev, "pulses-per-revolution can't be zero.\n");
return -EINVAL;
}
@@ -602,7 +609,7 @@ static int pwm_fan_probe(struct platform_device *pdev)
fan_channel_config[i] = HWMON_F_INPUT;
dev_dbg(dev, "tach%d: irq=%d, pulses_per_revolution=%d\n",
- i, tach->irq, tach->pulses_per_revolution);
+ i, tach->irq, ctx->pulses_per_revolution[i]);
}
if (ctx->tach_count > 0) {
@@ -622,7 +629,7 @@ static int pwm_fan_probe(struct platform_device *pdev)
return PTR_ERR(hwmon);
}
- ret = pwm_fan_of_get_cooling_data(dev, ctx);
+ ret = pwm_fan_get_cooling_data(dev, ctx);
if (ret)
return ret;
diff --git a/drivers/hwmon/sbrmi.c b/drivers/hwmon/sbrmi.c
index 4318f5121145..d48d8e5460ff 100644
--- a/drivers/hwmon/sbrmi.c
+++ b/drivers/hwmon/sbrmi.c
@@ -328,7 +328,7 @@ static int sbrmi_probe(struct i2c_client *client)
}
static const struct i2c_device_id sbrmi_id[] = {
- {"sbrmi", 0},
+ {"sbrmi"},
{}
};
MODULE_DEVICE_TABLE(i2c, sbrmi_id);
diff --git a/drivers/hwmon/sbtsi_temp.c b/drivers/hwmon/sbtsi_temp.c
index a4181acb1aa6..3c839f56c460 100644
--- a/drivers/hwmon/sbtsi_temp.c
+++ b/drivers/hwmon/sbtsi_temp.c
@@ -218,7 +218,7 @@ static int sbtsi_probe(struct i2c_client *client)
}
static const struct i2c_device_id sbtsi_id[] = {
- {"sbtsi", 0},
+ {"sbtsi"},
{}
};
MODULE_DEVICE_TABLE(i2c, sbtsi_id);
diff --git a/drivers/hwmon/sht21.c b/drivers/hwmon/sht21.c
index 55c179475208..ad1b827ea782 100644
--- a/drivers/hwmon/sht21.c
+++ b/drivers/hwmon/sht21.c
@@ -278,7 +278,7 @@ static int sht21_probe(struct i2c_client *client)
/* Device ID table */
static const struct i2c_device_id sht21_id[] = {
- { "sht21", 0 },
+ { "sht21" },
{ }
};
MODULE_DEVICE_TABLE(i2c, sht21_id);
diff --git a/drivers/hwmon/sht4x.c b/drivers/hwmon/sht4x.c
index 4883755d4b1e..b8916d2735b5 100644
--- a/drivers/hwmon/sht4x.c
+++ b/drivers/hwmon/sht4x.c
@@ -276,7 +276,7 @@ static int sht4x_probe(struct i2c_client *client)
}
static const struct i2c_device_id sht4x_id[] = {
- { "sht4x", 0 },
+ { "sht4x" },
{ },
};
MODULE_DEVICE_TABLE(i2c, sht4x_id);
diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c
index d20800a1f02b..21103af4e139 100644
--- a/drivers/hwmon/smsc47m192.c
+++ b/drivers/hwmon/smsc47m192.c
@@ -618,7 +618,7 @@ static int smsc47m192_probe(struct i2c_client *client)
}
static const struct i2c_device_id smsc47m192_id[] = {
- { "smsc47m192", 0 },
+ { "smsc47m192" },
{ }
};
MODULE_DEVICE_TABLE(i2c, smsc47m192_id);
diff --git a/drivers/hwmon/stts751.c b/drivers/hwmon/stts751.c
index 847c99376930..e7632081a1d1 100644
--- a/drivers/hwmon/stts751.c
+++ b/drivers/hwmon/stts751.c
@@ -72,7 +72,7 @@ static const int stts751_intervals[] = {
};
static const struct i2c_device_id stts751_id[] = {
- { "stts751", 0 },
+ { "stts751" },
{ }
};
@@ -91,7 +91,6 @@ struct stts751_priv {
int event_max, event_min;
int therm;
int hyst;
- bool smbus_timeout;
int temp;
unsigned long last_update, last_alert_update;
u8 config;
diff --git a/drivers/hwmon/tc654.c b/drivers/hwmon/tc654.c
index 42a9658f1bc2..39fe5836f237 100644
--- a/drivers/hwmon/tc654.c
+++ b/drivers/hwmon/tc654.c
@@ -550,8 +550,8 @@ static int tc654_probe(struct i2c_client *client)
}
static const struct i2c_device_id tc654_id[] = {
- {"tc654", 0},
- {"tc655", 0},
+ {"tc654"},
+ {"tc655"},
{}
};
diff --git a/drivers/hwmon/tc74.c b/drivers/hwmon/tc74.c
index 03950670bd78..9984373a25fb 100644
--- a/drivers/hwmon/tc74.c
+++ b/drivers/hwmon/tc74.c
@@ -151,7 +151,7 @@ static int tc74_probe(struct i2c_client *client)
}
static const struct i2c_device_id tc74_id[] = {
- { "tc74", 0 },
+ { "tc74" },
{}
};
MODULE_DEVICE_TABLE(i2c, tc74_id);
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
index 2506c78590af..8af44a33055f 100644
--- a/drivers/hwmon/tmp102.c
+++ b/drivers/hwmon/tmp102.c
@@ -286,7 +286,7 @@ static int tmp102_resume(struct device *dev)
static DEFINE_SIMPLE_DEV_PM_OPS(tmp102_dev_pm_ops, tmp102_suspend, tmp102_resume);
static const struct i2c_device_id tmp102_id[] = {
- { "tmp102", 0 },
+ { "tmp102" },
{ }
};
MODULE_DEVICE_TABLE(i2c, tmp102_id);
diff --git a/drivers/hwmon/tmp103.c b/drivers/hwmon/tmp103.c
index a84c29a3a765..f271a03e05ae 100644
--- a/drivers/hwmon/tmp103.c
+++ b/drivers/hwmon/tmp103.c
@@ -197,7 +197,7 @@ static int tmp103_resume(struct device *dev)
static DEFINE_SIMPLE_DEV_PM_OPS(tmp103_dev_pm_ops, tmp103_suspend, tmp103_resume);
static const struct i2c_device_id tmp103_id[] = {
- { "tmp103", 0 },
+ { "tmp103" },
{ }
};
MODULE_DEVICE_TABLE(i2c, tmp103_id);
diff --git a/drivers/hwmon/tmp108.c b/drivers/hwmon/tmp108.c
index d7a09ab2bc11..a82bbc959eb1 100644
--- a/drivers/hwmon/tmp108.c
+++ b/drivers/hwmon/tmp108.c
@@ -413,7 +413,7 @@ static int tmp108_resume(struct device *dev)
static DEFINE_SIMPLE_DEV_PM_OPS(tmp108_dev_pm_ops, tmp108_suspend, tmp108_resume);
static const struct i2c_device_id tmp108_i2c_ids[] = {
- { "tmp108", 0 },
+ { "tmp108" },
{ }
};
MODULE_DEVICE_TABLE(i2c, tmp108_i2c_ids);
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 9681eaa06c8e..ace854b370a0 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -328,7 +328,7 @@ static void w83791d_print_debug(struct w83791d_data *data, struct device *dev);
static void w83791d_init_client(struct i2c_client *client);
static const struct i2c_device_id w83791d_id[] = {
- { "w83791d", 0 },
+ { "w83791d" },
{ }
};
MODULE_DEVICE_TABLE(i2c, w83791d_id);
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 69ce379a9e13..b0b5f60eea53 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -296,7 +296,7 @@ static void w83792d_print_debug(struct w83792d_data *data, struct device *dev);
static void w83792d_init_client(struct i2c_client *client);
static const struct i2c_device_id w83792d_id[] = {
- { "w83792d", 0 },
+ { "w83792d" },
{ }
};
MODULE_DEVICE_TABLE(i2c, w83792d_id);
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index 96bab94ba899..0acf6bd0227f 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -291,7 +291,7 @@ static void w83793_update_nonvolatile(struct device *dev);
static struct w83793_data *w83793_update_device(struct device *dev);
static const struct i2c_device_id w83793_id[] = {
- { "w83793", 0 },
+ { "w83793" },
{ }
};
MODULE_DEVICE_TABLE(i2c, w83793_id);
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index 9c11ed69c055..df77b53a1b2f 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -74,7 +74,7 @@ static struct w83l785ts_data *w83l785ts_update_device(struct device *dev);
*/
static const struct i2c_device_id w83l785ts_id[] = {
- { "w83l785ts", 0 },
+ { "w83l785ts" },
{ }
};
MODULE_DEVICE_TABLE(i2c, w83l785ts_id);
diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c
index 75874cf7851c..9b81bd406e05 100644
--- a/drivers/hwmon/w83l786ng.c
+++ b/drivers/hwmon/w83l786ng.c
@@ -741,7 +741,7 @@ w83l786ng_probe(struct i2c_client *client)
}
static const struct i2c_device_id w83l786ng_id[] = {
- { "w83l786ng", 0 },
+ { "w83l786ng" },
{ }
};
MODULE_DEVICE_TABLE(i2c, w83l786ng_id);
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 50a07d134506..1a4dfd7a1c4a 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -990,11 +990,16 @@ static inline void acpi_put_acpi_dev(struct acpi_device *adev)
{
acpi_dev_put(adev);
}
+
+int acpi_wait_for_acpi_ipmi(void);
+
#else /* CONFIG_ACPI */
static inline int register_acpi_bus_type(void *bus) { return 0; }
static inline int unregister_acpi_bus_type(void *bus) { return 0; }
+static inline int acpi_wait_for_acpi_ipmi(void) { return 0; }
+
#endif /* CONFIG_ACPI */
#endif /*__ACPI_BUS_H__*/