diff options
-rw-r--r-- | Documentation/devicetree/bindings/display/exynos/exynos_dp.txt | 112 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml | 163 |
2 files changed, 163 insertions, 112 deletions
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt deleted file mode 100644 index 3a401590320f..000000000000 --- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt +++ /dev/null @@ -1,112 +0,0 @@ -The Exynos display port interface should be configured based on -the type of panel connected to it. - -We use two nodes: - -dp-controller node - -dptx-phy node(defined inside dp-controller node) - -For the DP-PHY initialization, we use the dptx-phy node. -Required properties for dptx-phy: deprecated, use phys and phy-names - -reg: deprecated - Base address of DP PHY register. - -samsung,enable-mask: deprecated - The bit-mask used to enable/disable DP PHY. - -For the Panel initialization, we read data from dp-controller node. -Required properties for dp-controller: - -compatible: - should be "samsung,exynos5-dp". - -reg: - physical base address of the controller and length - of memory mapped region. - -interrupts: - interrupt combiner values. - -clocks: - from common clock binding: handle to dp clock. - -clock-names: - from common clock binding: Shall be "dp". - -phys: - from general PHY binding: the phandle for the PHY device. - -phy-names: - from general PHY binding: Should be "dp". - -Optional properties for dp-controller: - -interlaced: - interlace scan mode. - Progressive if defined, Interlaced if not defined - -vsync-active-high: - VSYNC polarity configuration. - High if defined, Low if not defined - -hsync-active-high: - HSYNC polarity configuration. - High if defined, Low if not defined - -samsung,hpd-gpio: - Hotplug detect GPIO. - Indicates which GPIO should be used for hotplug - detection - -video interfaces: Device node can contain video interface port - nodes according to [1]. - - display-timings: timings for the connected panel as described by - Documentation/devicetree/bindings/display/panel/display-timing.txt - -For the below properties, please refer to Analogix DP binding document: - * Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml - -phys (required) - -phy-names (required) - -hpd-gpios (optional) - force-hpd (optional) - -Deprecated properties for DisplayPort: --interlaced: deprecated prop that can parsed from drm_display_mode. --vsync-active-high: deprecated prop that can parsed from drm_display_mode. --hsync-active-high: deprecated prop that can parsed from drm_display_mode. --samsung,ycbcr-coeff: deprecated prop that can parsed from drm_display_mode. --samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode. --samsung,color-space: deprecated prop that can parsed from drm_display_info. --samsung,color-depth: deprecated prop that can parsed from drm_display_info. --samsung,link-rate: deprecated prop that can reading from monitor by dpcd method. --samsung,lane-count: deprecated prop that can reading from monitor by dpcd method. --samsung,hpd-gpio: deprecated name for hpd-gpios. - -------------------------------------------------------------------------------- - -Example: - -SOC specific portion: - dp-controller { - compatible = "samsung,exynos5-dp"; - reg = <0x145b0000 0x10000>; - interrupts = <10 3>; - interrupt-parent = <&combiner>; - clocks = <&clock 342>; - clock-names = "dp"; - - phys = <&dp_phy>; - phy-names = "dp"; - }; - -Board Specific portion: - dp-controller { - display-timings { - native-mode = <&lcd_timing>; - lcd_timing: 1366x768 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; - - ports { - port@0 { - dp_out: endpoint { - remote-endpoint = <&bridge_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml new file mode 100644 index 000000000000..dda9097a7911 --- /dev/null +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5-dp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5250/Exynos5420 SoC Display Port + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + const: samsung,exynos5-dp + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: dp + + display-timings: + $ref: /schemas/display/panel/display-timings.yaml# + + interrupts: + maxItems: 1 + + hpd-gpios: + description: + Hotplug detect GPIO. + Indicates which GPIO should be used for hotplug detection + + phys: + maxItems: 1 + + phy-names: + items: + - const: dp + + power-domains: + maxItems: 1 + + interlaced: + type: boolean + deprecated: true + description: + Interlace scan mode. Progressive if defined, interlaced if not defined. + + vsync-active-high: + type: boolean + deprecated: true + description: + VSYNC polarity configuration. High if defined, low if not defined + + hsync-active-high: + type: boolean + deprecated: true + description: + HSYNC polarity configuration. High if defined, low if not defined + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a dp-connector node. + + required: + - port + + samsung,hpd-gpios: + maxItems: 1 + deprecated: true + + samsung,ycbcr-coeff: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_mode. + + samsung,dynamic-range: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_mode. + + samsung,color-space: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_info. + + samsung,color-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_info. + + samsung,link-rate: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can reading from monitor by dpcd method. + + samsung,lane-count: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can reading from monitor by dpcd method. + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - phys + - phy-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5250.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dp-controller@145b0000 { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x1000>; + clocks = <&clock CLK_DP>; + clock-names = "dp"; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + phys = <&dp_phy>; + phy-names = "dp"; + pinctrl-0 = <&dp_hpd>; + pinctrl-names = "default"; + power-domains = <&pd_disp1>; + + samsung,color-space = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; + + ports { + port { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; + }; |