diff options
95 files changed, 8351 insertions, 586 deletions
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 1a5fb889a444..66beaac60e1d 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -10,17 +10,10 @@ maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> description: | - Some qcom based bootloaders identify the dtb blob based on a set of - device properties like SoC and platform and revisions of those components. - To support this scheme, we encode this information into the board compatible - string. - - Each board must specify a top-level board compatible string with the following - format: - - compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]" - - The 'SoC' and 'board' elements are required. All other elements are optional. + For devices using the Qualcomm SoC the "compatible" properties consists of + one or several "manufacturer,model" strings, describing the device itself, + followed by one or several "qcom,<SoC>" strings, describing the SoC used in + the device. The 'SoC' element must be one of the following strings: @@ -90,43 +83,9 @@ description: | sm8650 x1e80100 - The 'board' element must be one of the following strings: - - adp - cdp - dragonboard - idp - liquid - mtp - qcp - qrd - rb2 - ride - sbc - x100 - - The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor> - where the minor number may be omitted when it's zero, i.e. v1.0 is the same - as v1. If all versions of the 'board_version' elements match, then a - wildcard '*' should be used, e.g. 'v*'. - - The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9. - - Examples: - - "qcom,msm8916-v1-cdp-pm8916-v2.1" - - A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version - 2.1. - - "qcom,apq8074-v2.0-2-dragonboard/1-v0.1" - - A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in - foundry 2. - There are many devices in the list below that run the standard ChromeOS bootloader setup and use the open source depthcharge bootloader to boot the - OS. These devices do not use the scheme described above. For details, see: + OS. These devices use the bootflow explained at https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html properties: @@ -187,6 +146,7 @@ properties: - microsoft,superman-lte - microsoft,tesla - motorola,peregrine + - samsung,matisselte - const: qcom,msm8926 - const: qcom,msm8226 @@ -244,11 +204,15 @@ properties: - samsung,a5u-eur - samsung,e5 - samsung,e7 + - samsung,fortuna3g + - samsung,gprimeltecan - samsung,grandmax + - samsung,grandprimelte - samsung,gt510 - samsung,gt58 - samsung,j5 - samsung,j5x + - samsung,rossa - samsung,serranove - thwc,uf896 - thwc,ufi001c @@ -988,6 +952,7 @@ properties: - items: - enum: + - xiaomi,curtana - xiaomi,joyeuse - const: qcom,sm7125 @@ -1035,6 +1000,7 @@ properties: - items: - enum: + - qcom,sm8550-hdk - qcom,sm8550-mtp - qcom,sm8550-qrd - const: qcom,sm8550 diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml index 6c4846b34e4b..a1085ef4fd05 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml @@ -31,10 +31,15 @@ properties: - const: bi_tcxo_ao - const: sleep_clk + power-domains: + items: + - description: CX domain + required: - compatible - clocks - clock-names + - power-domains allOf: - $ref: qcom,gcc.yaml# @@ -44,6 +49,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> clock-controller@100000 { compatible = "qcom,gcc-sc8180x"; reg = <0x00100000 0x1f0000>; @@ -51,6 +57,7 @@ examples: <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + power-domains = <&rpmhpd SC8180X_CX>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml index 48986460f994..fa0e5b6b02b8 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml @@ -17,6 +17,7 @@ description: | include/dt-bindings/clock/qcom,sm8450-camcc.h include/dt-bindings/clock/qcom,sm8550-camcc.h include/dt-bindings/clock/qcom,sc8280xp-camcc.h + include/dt-bindings/clock/qcom,x1e80100-camcc.h allOf: - $ref: qcom,gcc.yaml# @@ -27,6 +28,7 @@ properties: - qcom,sc8280xp-camcc - qcom,sm8450-camcc - qcom,sm8550-camcc + - qcom,x1e80100-camcc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml index 1a384e8532a5..36974309cf69 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml @@ -18,6 +18,7 @@ description: | include/dt-bindings/clock/qcom,sm8550-gpucc.h include/dt-bindings/reset/qcom,sm8450-gpucc.h include/dt-bindings/reset/qcom,sm8650-gpucc.h + include/dt-bindings/reset/qcom,x1e80100-gpucc.h properties: compatible: @@ -25,6 +26,7 @@ properties: - qcom,sm8450-gpucc - qcom,sm8550-gpucc - qcom,sm8650-gpucc + - qcom,x1e80100-gpucc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml index c129f8c16b50..bad0260764d4 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml @@ -14,12 +14,17 @@ description: | Qualcomm display clock control module provides the clocks, resets and power domains on SM8550. - See also:: include/dt-bindings/clock/qcom,sm8550-dispcc.h + See also: + - include/dt-bindings/clock/qcom,sm8550-dispcc.h + - include/dt-bindings/clock/qcom,sm8650-dispcc.h + - include/dt-bindings/clock/qcom,x1e80100-dispcc.h properties: compatible: enum: - qcom,sm8550-dispcc + - qcom,sm8650-dispcc + - qcom,x1e80100-dispcc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml index af16b05eac96..48fdd562d743 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml @@ -23,6 +23,7 @@ properties: - enum: - qcom,sm8550-tcsr - qcom,sm8650-tcsr + - qcom,x1e80100-tcsr - const: syscon clocks: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml deleted file mode 100644 index 5e0c45c380f5..000000000000 --- a/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml +++ /dev/null @@ -1,106 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/clock/qcom,sm8650-dispcc.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display Clock & Reset Controller for SM8650 - -maintainers: - - Bjorn Andersson <andersson@kernel.org> - - Neil Armstrong <neil.armstrong@linaro.org> - -description: | - Qualcomm display clock control module provides the clocks, resets and power - domains on SM8650. - - See also:: include/dt-bindings/clock/qcom,sm8650-dispcc.h - -properties: - compatible: - enum: - - qcom,sm8650-dispcc - - clocks: - items: - - description: Board XO source - - description: Board Always On XO source - - description: Display's AHB clock - - description: sleep clock - - description: Byte clock from DSI PHY0 - - description: Pixel clock from DSI PHY0 - - description: Byte clock from DSI PHY1 - - description: Pixel clock from DSI PHY1 - - description: Link clock from DP PHY0 - - description: VCO DIV clock from DP PHY0 - - description: Link clock from DP PHY1 - - description: VCO DIV clock from DP PHY1 - - description: Link clock from DP PHY2 - - description: VCO DIV clock from DP PHY2 - - description: Link clock from DP PHY3 - - description: VCO DIV clock from DP PHY3 - - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - - power-domains: - description: - A phandle and PM domain specifier for the MMCX power domain. - maxItems: 1 - - required-opps: - description: - A phandle to an OPP node describing required MMCX performance point. - maxItems: 1 - -required: - - compatible - - reg - - clocks - - '#clock-cells' - - '#reset-cells' - - '#power-domain-cells' - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,sm8650-gcc.h> - #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> - #include <dt-bindings/power/qcom,rpmhpd.h> - clock-controller@af00000 { - compatible = "qcom,sm8650-dispcc"; - reg = <0x0af00000 0x10000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&rpmhcc RPMH_CXO_CLK_A>, - <&gcc GCC_DISP_AHB_CLK>, - <&sleep_clk>, - <&dsi0_phy 0>, - <&dsi0_phy 1>, - <&dsi1_phy 0>, - <&dsi1_phy 1>, - <&dp0_phy 0>, - <&dp0_phy 1>, - <&dp1_phy 0>, - <&dp1_phy 1>, - <&dp2_phy 0>, - <&dp2_phy 1>, - <&dp3_phy 0>, - <&dp3_phy 1>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - power-domains = <&rpmhpd RPMHPD_MMCX>; - required-opps = <&rpmhpd_opp_low_svs>; - }; -... diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi index 27429d0fedfb..c1ab65f43cb8 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi @@ -580,12 +580,16 @@ <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 51 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 10 IRQ_TYPE_EDGE_BOTH>, <&pdc 11 IRQ_TYPE_EDGE_BOTH>, - <&pdc 10 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_GDSC>; diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi index 40591a4da6a4..2b8635f0e38d 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi @@ -501,14 +501,16 @@ <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 76 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 19 IRQ_TYPE_EDGE_BOTH>, <&pdc 18 IRQ_TYPE_EDGE_BOTH>, - <&pdc 19 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 76 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_GDSC>; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 39889d5f8e12..7d40ec5e7d21 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8216-samsung-fortuna3g.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb @@ -35,11 +36,14 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e5.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e7.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-gprimeltecan.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandmax.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandprimelte.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-gt510.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-gt58.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5x.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-rossa.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb @@ -210,6 +214,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-curtana.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb @@ -233,6 +238,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts index c08b4be5cc7e..f9cbf8c1d689 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts @@ -9,7 +9,7 @@ #include "apq8016-sbc.dts" / { - camera_vdddo_1v8: camera-vdddo-1v8 { + camera_vdddo_1v8: regulator-camera-vdddo { compatible = "regulator-fixed"; regulator-name = "camera_vdddo"; regulator-min-microvolt = <1800000>; @@ -17,7 +17,7 @@ regulator-always-on; }; - camera_vdda_2v8: camera-vdda-2v8 { + camera_vdda_2v8: regulator-camera-vdda { compatible = "regulator-fixed"; regulator-name = "camera_vdda"; regulator-min-microvolt = <2800000>; @@ -25,7 +25,7 @@ regulator-always-on; }; - camera_vddd_1v5: camera-vddd-1v5 { + camera_vddd_1v5: regulator-camera-vddd { compatible = "regulator-fixed"; regulator-name = "camera_vddd"; regulator-min-microvolt = <1500000>; @@ -53,7 +53,7 @@ }; &cci_i2c0 { - camera_rear@3b { + camera@3b { compatible = "ovti,ov5640"; reg = <0x3b>; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index 42e2e48b2bc3..770d9c2fb456 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -320,8 +320,12 @@ compatible = "qcom,ipq5332-dwc3", "qcom,dwc3"; reg = <0x08af8800 0x400>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 52 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; clocks = <&gcc GCC_USB0_MASTER_CLK>, <&gcc GCC_SNOC_USB_CLK>, diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 61c8fd49c966..4e29adea570a 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/clock/qcom,gcc-ipq6018.h> #include <dt-bindings/reset/qcom,gcc-ipq6018.h> #include <dt-bindings/clock/qcom,apss-ipq.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <2>; @@ -43,6 +44,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; cpu-supply = <&ipq6018_s2>; + #cooling-cells = <2>; }; CPU1: cpu@1 { @@ -55,6 +57,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; cpu-supply = <&ipq6018_s2>; + #cooling-cells = <2>; }; CPU2: cpu@2 { @@ -67,6 +70,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; cpu-supply = <&ipq6018_s2>; + #cooling-cells = <2>; }; CPU3: cpu@3 { @@ -79,6 +83,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; cpu-supply = <&ipq6018_s2>; + #cooling-cells = <2>; }; L2_0: l2-cache { @@ -330,6 +335,16 @@ clock-names = "core"; }; + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq6018-tsens", "qcom,ipq8074-tsens"; + reg = <0x0 0x004a9000 0x0 0x1000>, + <0x0 0x004a8000 0x0 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; + }; + cryptobam: dma-controller@704000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x00704000 0x0 0x20000>; @@ -418,6 +433,12 @@ <&gcc GCC_USB1_MOCK_UTMI_CLK>; assigned-clock-rates = <133330000>, <24000000>; + + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy"; + resets = <&gcc GCC_USB1_BCR>; status = "disabled"; @@ -578,6 +599,21 @@ status = "disabled"; }; + blsp1_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x078ba000 0x0 0x600>; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp_dma 22>, <&blsp_dma 23>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + qpic_bam: dma-controller@7984000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x07984000 0x0 0x1a000>; @@ -630,6 +666,13 @@ <133330000>, <24000000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy", + "ss_phy_irq"; + resets = <&gcc GCC_USB0_BCR>; status = "disabled"; @@ -867,6 +910,122 @@ }; }; + thermal-zones { + nss-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 4>; + + trips { + nss-top-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nss-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 5>; + + trips { + nss-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + wcss-phya0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 7>; + + trips { + wcss-phya0-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + wcss-phya1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 8>; + + trips { + wcss-phya1-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 13>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + + cpu_alert: cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + lpass-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 14>; + + trips { + lpass-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ddrss-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 15>; + + trips { + ddrss-top-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 26441447c866..e5b89753aa5c 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -252,6 +252,8 @@ clocks = <&gcc GCC_MDIO_AHB_CLK>; clock-names = "gcc_mdio_ahb_clk"; + clock-frequency = <6250000>; + status = "disabled"; }; @@ -627,6 +629,13 @@ <133330000>, <19200000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy", + "ss_phy_irq"; + power-domains = <&gcc USB0_GDSC>; resets = <&gcc GCC_USB0_BCR>; @@ -669,6 +678,13 @@ <133330000>, <19200000>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy", + "ss_phy_irq"; + power-domains = <&gcc USB1_GDSC>; resets = <&gcc GCC_USB1_BCR>; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 5f83ee42a719..7f2e5cbf3bbb 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -321,8 +321,10 @@ sdhc_1: mmc@7804000 { compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; - reg = <0x07804000 0x1000>, <0x07805000 0x1000>; - reg-names = "hc", "cqhci"; + reg = <0x07804000 0x1000>, + <0x07805000 0x1000>, + <0x07808000 0x2000>; + reg-names = "hc", "cqhci", "ice"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -330,9 +332,11 @@ clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board_clk>; - clock-names = "iface", "core", "xo"; + <&xo_board_clk>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", "core", "xo", "ice"; non-removable; + supports-cqe; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts new file mode 100644 index 000000000000..366914be7d53 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-fortuna-common.dtsi" + +/ { + model = "Samsung Galaxy Grand Prime (SM-G530H)"; + compatible = "samsung,fortuna3g", "qcom,msm8916"; + chassis-type = "handset"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi new file mode 100644 index 000000000000..c2800ad2dd5b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85a00000 { + reg = <0x0 0x85a00000 0x0 0x600000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + button-home { + label = "Home"; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + haptic { + compatible = "regulator-haptic"; + haptic-supply = <®_motor_vdd>; + min-microvolt = <3300000>; + max-microvolt = <3300000>; + }; + + reg_motor_vdd: regulator-motor-vdd { + compatible = "regulator-fixed"; + regulator-name = "motor_vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&motor_en_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + muic: extcon@25 { + compatible = "siliconmitus,sm5502-muic"; + reg = <0x25>; + interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&muic_int_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + fuel-gauge@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + + interrupts-extended = <&tlmm 121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&fg_alert_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5000000>; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&sound { + model = "msm8916-1mic"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; +}; + +&usb { + extcon = <&muic>, <&muic>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic>; +}; + +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + fg_alert_default: fg-alert-default-state { + pins = "gpio121"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio109"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + motor_en_default: motor-en-default-state { + pins = "gpio72"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + muic_int_default: muic-int-default-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts new file mode 100644 index 000000000000..9d65fa58ba92 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-fortuna-common.dtsi" + +/ { + model = "Samsung Galaxy Grand Prime (SM-G530W)"; + compatible = "samsung,gprimeltecan", "qcom,msm8916"; + chassis-type = "handset"; + + reserved-memory { + /* Firmware for gprimeltecan needs more space */ + /delete-node/ tz-apps@85a00000; + + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; +}; + +&mpss_mem { + /* Firmware for gprimeltecan needs more space */ + reg = <0x0 0x86800000 0x0 0x5400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts new file mode 100644 index 000000000000..a66ce4b13547 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-fortuna-common.dtsi" + +/ { + model = "Samsung Galaxy Grand Prime (SM-G530FZ)"; + compatible = "samsung,grandprimelte", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&mpss_mem { + /* Firmware for grandprimelte needs more space */ + reg = <0x0 0x86800000 0x0 0x5400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi new file mode 100644 index 000000000000..42843771ae2a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-samsung-fortuna-common.dtsi" + +/* SM5504 MUIC instead of SM5502 */ +/delete-node/ &muic; + +&blsp_i2c1 { + muic: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&muic_int_default>; + pinctrl-names = "default"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts new file mode 100644 index 000000000000..ebaa13c6b016 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-rossa-common.dtsi" + +/ { + model = "Samsung Galaxy Core Prime LTE"; + compatible = "samsung,rossa", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&mpss_mem { + /* Firmware for rossa needs more space */ + reg = <0x0 0x86800000 0x0 0x5800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index e423c57ddd41..cedff4166bfb 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1785,6 +1785,8 @@ power-domains = <&gcc OXILI_GDSC>; operating-points-v2 = <&gpu_opp_table>; iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + #cooling-cells = <2>; + status = "disabled"; gpu_opp_table: opp-table { @@ -2688,6 +2690,13 @@ thermal-sensors = <&tsens 2>; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { gpu_alert0: trip-point0 { temperature = <75000>; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index 82d85ff61045..dd45975682b2 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -1427,6 +1427,8 @@ power-domains = <&gcc OXILI_GDSC>; operating-points-v2 = <&opp_table>; iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + #cooling-cells = <2>; + status = "disabled"; opp_table: opp-table { @@ -2456,6 +2458,13 @@ thermal-sensors = <&tsens 3>; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { gpu_alert0: trip-point0 { temperature = <75000>; @@ -2463,7 +2472,7 @@ type = "passive"; }; - gpu_crit: gpu_crit { + gpu_crit: gpu-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index ad2f8cf9c966..f1011bb641c6 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -859,6 +859,8 @@ "vsync", "core"; + resets = <&gcc GCC_MDSS_BCR>; + #address-cells = <1>; #size-cells = <1>; ranges; @@ -1044,6 +1046,125 @@ }; }; + gpu: gpu@1c00000 { + compatible = "qcom,adreno-506.0", "qcom,adreno"; + reg = <0x01c00000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc GCC_OXILI_TIMER_CLK>, + <&gcc GCC_OXILI_AON_CLK>; + clock-names = "core", + "iface", + "mem_iface", + "alt_mem_iface", + "rbbmtimer", + "alwayson"; + power-domains = <&gcc OXILI_GX_GDSC>; + + iommus = <&gpu_iommu 0>; + operating-points-v2 = <&gpu_opp_table>; + + #cooling-cells = <2>; + + status = "disabled"; + + zap-shader { + memory-region = <&zap_shader_region>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-133300000 { + opp-hz = /bits/ 64 <133300000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-216000000 { + opp-hz = /bits/ 64 <216000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_nom_plus>; + }; + + /* + * This opp is only available on msm8953 and + * sdm632, the max for sdm450 is 600MHz. + */ + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_turbo>; + }; + }; + }; + + gpu_iommu: iommu@1c48000 { + compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v2"; + ranges = <0 0x01c48000 0x8000>; + + clocks = <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>; + clock-names = "iface", "bus"; + + power-domains = <&gcc OXILI_CX_GDSC>; + + qcom,iommu-secure-id = <18>; + + #address-cells = <1>; + #iommu-cells = <1>; + #size-cells = <1>; + + /* gfx3d_user */ + iommu-ctx@0 { + compatible = "qcom,msm-iommu-v2-ns"; + reg = <0x0000 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* gfx3d_secure */ + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v2-sec"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + apps_iommu: iommu@1e20000 { compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1"; ranges = <0 0x01e20000 0x20000>; @@ -1160,9 +1281,12 @@ #size-cells = <1>; ranges; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; + interrupt-names = "pwr_event", + "qusb2_phy", + "ss_phy_irq"; clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, <&gcc GCC_USB30_MASTER_CLK>, @@ -2012,6 +2136,33 @@ }; }; }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 15>; + + trips { + gpu_alert: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_alert>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; }; timer { diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index cbc84459a5ae..10cd244dea4f 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -377,7 +377,7 @@ &blsp2_i2c1 { status = "okay"; - sideinteraction: ad7147_captouch@2c { + sideinteraction: touch@2c { compatible = "ad,ad7147_captouch"; reg = <0x2c>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index 9dbde79f26a2..0163d41f95f8 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -79,7 +79,7 @@ pmsg-size = <0x80000>; }; - fb_region: fb_region@40000000 { + fb_region: fb@40000000 { reg = <0 0x40000000 0 0x1000000>; no-map; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 8295bf1b219d..695e541832ad 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -233,7 +233,7 @@ #size-cells = <2>; ranges; - dfps_data_mem: dfps_data_mem@3400000 { + dfps_data_mem: dfps-data@3400000 { reg = <0 0x03400000 0 0x1000>; no-map; }; @@ -243,7 +243,7 @@ no-map; }; - smem_mem: smem_region@6a00000 { + smem_mem: smem@6a00000 { reg = <0 0x06a00000 0 0x200000>; no-map; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 8d41ed261adf..dcaab5bf2c5d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -782,12 +782,12 @@ #address-cells = <1>; #size-cells = <1>; - qusb2p_hstx_trim: hstx_trim@24e { + qusb2p_hstx_trim: hstx-trim@24e { reg = <0x24e 0x2>; bits = <5 4>; }; - qusb2s_hstx_trim: hstx_trim@24f { + qusb2s_hstx_trim: hstx-trim@24f { reg = <0x24f 0x1>; bits = <1 4>; }; @@ -2104,7 +2104,7 @@ <0 0>, <0 0>, <150000000 300000000>, - <0 0>, + <75000000 150000000>, <0 0>, <0 0>, <0 0>, @@ -2123,8 +2123,8 @@ compatible = "qcom,msm8996-qmp-ufs-phy"; reg = <0x00627000 0x1000>; - clocks = <&gcc GCC_UFS_CLKREF_CLK>; - clock-names = "ref"; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, <&gcc GCC_UFS_CLKREF_CLK>; + clock-names = "ref", "qref"; resets = <&ufshc 0>; reset-names = "ufsphy"; @@ -3408,8 +3408,12 @@ #size-cells = <1>; ranges; - interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy", + "hs_phy_irq"; clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>, <&gcc GCC_USB20_MASTER_CLK>, diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 2793cc22d381..4dfe2d09ac28 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1047,12 +1047,12 @@ compatible = "qcom,msm8998-qmp-ufs-phy"; reg = <0x01da7000 0x1000>; - clock-names = - "ref", - "ref_aux"; - clocks = - <&gcc GCC_UFS_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_AUX_CLK>; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK1>, + <&gcc GCC_UFS_PHY_AUX_CLK>, + <&gcc GCC_UFS_CLKREF_CLK>; + clock-names = "ref", + "ref_aux", + "qref"; reset-names = "ufsphy"; resets = <&ufshc 0>; @@ -1072,6 +1072,11 @@ reg = <0x01f60000 0x20000>; }; + tcsr_regs_2: syscon@1fc0000 { + compatible = "qcom,msm8998-tcsr", "syscon"; + reg = <0x01fc0000 0x26000>; + }; + tlmm: pinctrl@3400000 { compatible = "qcom,msm8998-pinctrl"; reg = <0x03400000 0xc00000>; @@ -2132,9 +2137,12 @@ <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <120000000>; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; + interrupt-names = "pwr_event", + "qusb2_phy", + "ss_phy_irq"; power-domains = <&gcc USB_30_GDSC>; @@ -2174,6 +2182,8 @@ reset-names = "phy", "phy_phy"; + qcom,tcsr-reg = <&tcsr_regs_2 0xb244>; + status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/pm2250.dtsi b/arch/arm64/boot/dts/qcom/pm4125.dtsi index 5f1d15db5c99..cf8c822e80ce 100644 --- a/arch/arm64/boot/dts/qcom/pm2250.dtsi +++ b/arch/arm64/boot/dts/qcom/pm4125.dtsi @@ -19,7 +19,7 @@ compatible = "qcom,pm8916-pon"; reg = <0x800>; - pm2250_pwrkey: pwrkey { + pm4125_pwrkey: pwrkey { compatible = "qcom,pm8941-pwrkey"; interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; linux,code = <KEY_POWER>; @@ -27,7 +27,7 @@ bias-pull-up; }; - pm2250_resin: resin { + pm4125_resin: resin { compatible = "qcom,pm8941-resin"; interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; @@ -36,6 +36,36 @@ }; }; + pm4125_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pm4125-vbus-reg", "qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + status = "disabled"; + }; + + pm4125_typec: typec@1500 { + compatible = "qcom,pm4125-typec", "qcom,pmi632-typec"; + reg = <0x1500>; + interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect"; + vdd-vbus-supply = <&pm4125_vbus>; + + status = "disabled"; + }; + rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>, <0x6100>; @@ -43,11 +73,11 @@ interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pm2250_gpios: gpio@c000 { + pm4125_gpios: gpio@c000 { compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm2250_gpios 0 0 10>; + gpio-ranges = <&pm4125_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi index 4eb79e0ce40a..94d53b1cf6c8 100644 --- a/arch/arm64/boot/dts/qcom/pmi632.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi @@ -45,6 +45,36 @@ #address-cells = <1>; #size-cells = <0>; + pmi632_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pmi632-vbus-reg", "qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + status = "disabled"; + }; + + pmi632_typec: typec@1500 { + compatible = "qcom,pmi632-typec"; + reg = <0x1500>; + interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect"; + vdd-vbus-supply = <&pmi632_vbus>; + + status = "disabled"; + }; + pmi632_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; @@ -127,6 +157,11 @@ status = "disabled"; }; + pmi632_pbs_client3: pbs@7400 { + compatible = "qcom,pmi632-pbs", "qcom,pbs"; + reg = <0x7400>; + }; + pmi632_sdam_7: nvram@b600 { compatible = "qcom,spmi-sdam"; reg = <0xb600>; @@ -155,6 +190,10 @@ pmi632_lpg: pwm { compatible = "qcom,pmi632-lpg"; + nvmem = <&pmi632_sdam_7>; + nvmem-names = "lpg_chan_sdam"; + qcom,pbs = <&pmi632_pbs_client3>; + #address-cells = <1>; #size-cells = <0>; #pwm-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index 0911fb08ed63..89beac833d43 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -442,6 +442,11 @@ #hwlock-cells = <1>; }; + tcsr_regs: syscon@3c0000 { + compatible = "qcom,qcm2290-tcsr", "syscon"; + reg = <0x0 0x003c0000 0x0 0x40000>; + }; + tlmm: pinctrl@500000 { compatible = "qcom,qcm2290-tlmm"; reg = <0x0 0x00500000 0x0 0x300000>; @@ -690,6 +695,8 @@ #phy-cells = <0>; + qcom,tcsr-reg = <&tcsr_regs 0xb244>; + status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts index 176898c9dbbd..4ff9fc24e50e 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -71,6 +71,41 @@ }; }; + pmic-glink { + compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + reserved-memory { cont_splash_mem: cont-splash@e1000000 { reg = <0x0 0xe1000000 0x0 0x2300000>; @@ -82,6 +117,11 @@ no-map; }; + removed_mem: removed@c0000000 { + reg = <0x0 0xc0000000 0x0 0x5100000>; + no-map; + }; + rmtfs_mem: memory@f8500000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0xf8500000 0x0 0x600000>; @@ -886,7 +926,16 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { @@ -915,6 +964,11 @@ status = "okay"; }; +&venus { + firmware-name = "qcom/qcm6490/fairphone5/venus.mbn"; + status = "okay"; +}; + &wifi { qcom,ath11k-calibration-variant = "Fairphone_5"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts index 03e97e27d16d..e4bfad50a669 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -5,8 +5,14 @@ /dts-v1/; +/* PM7250B is configured to use SID8/9 */ +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sc7280.dtsi" +#include "pm7250b.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" #include "pmk8350.dtsi" @@ -109,7 +115,7 @@ no-map; }; - trusted_apps_mem: trusted_apps@c1800000 { + trusted_apps_mem: trusted-apps@c1800000 { reg = <0x0 0xc1800000 0x0 0x1c00000>; no-map; }; @@ -123,8 +129,8 @@ vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <4350000>; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; }; }; @@ -415,6 +421,33 @@ }; }; +&pm8350c_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 2f2eeaf2e945..a05d0234f7fc 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -675,6 +675,14 @@ assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; + + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "qusb2_phy"; + status = "disabled"; usb3_dwc3: usb@7580000 { @@ -704,6 +712,14 @@ assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>; assigned-clock-rates = <19200000>, <133333333>; + + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "qusb2_phy"; + status = "disabled"; usb@78c0000 { diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index 8bb7d13d85f6..97824c769ba3 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -110,7 +110,7 @@ no-map; }; - trusted_apps_mem: trusted_apps@c1800000 { + trusted_apps_mem: trusted-apps@c1800000 { reg = <0x0 0xc1800000 0x0 0x1c00000>; no-map; }; @@ -124,8 +124,8 @@ vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <4350000>; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; }; }; @@ -413,6 +413,23 @@ }; }; +&gcc { + protected-clocks = <GCC_CFG_NOC_LPASS_CLK>, + <GCC_MSS_CFG_AHB_CLK>, + <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, + <GCC_MSS_OFFLINE_AXI_CLK>, + <GCC_MSS_Q6SS_BOOT_CLK_SRC>, + <GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <GCC_MSS_SNOC_AXI_CLK>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_SEC_CTRL_CLK_SRC>, + <GCC_WPSS_AHB_BDG_MST_CLK>, + <GCC_WPSS_AHB_CLK>, + <GCC_WPSS_RSCP_CLK>; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index aa53b6af6d9c..6e9dd0312adc 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -7,7 +7,7 @@ #include <dt-bindings/leds/common.h> #include "qcm2290.dtsi" -#include "pm2250.dtsi" +#include "pm4125.dtsi" / { model = "Qualcomm Technologies, Inc. Robotics RB1"; @@ -177,6 +177,24 @@ }; }; +&CPU_PD0 { + /delete-property/ power-domains; +}; + +&CPU_PD1 { + /delete-property/ power-domains; +}; + +&CPU_PD2 { + /delete-property/ power-domains; +}; + +&CPU_PD3 { + /delete-property/ power-domains; +}; + +/delete-node/ &CLUSTER_PD; + &gpi_dma0 { status = "okay"; }; @@ -226,7 +244,7 @@ }; &mdss_dsi0 { - vdda-supply = <&pm2250_l5>; + vdda-supply = <&pm4125_l5>; status = "okay"; }; @@ -239,7 +257,7 @@ status = "okay"; }; -&pm2250_resin { +&pm4125_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; }; @@ -263,23 +281,23 @@ compatible = "qcom,rpm-pm2250-regulators"; vdd_s3-supply = <&vph_pwr>; vdd_s4-supply = <&vph_pwr>; - vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm2250_s3>; + vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm4125_s3>; vdd_l4_l17_l18_l19_l20_l21_l22-supply = <&vph_pwr>; - vdd_l13_l14_l15_l16-supply = <&pm2250_s4>; + vdd_l13_l14_l15_l16-supply = <&pm4125_s4>; /* * S1 - VDD_APC * S2 - VDD_CX */ - pm2250_s3: s3 { + pm4125_s3: s3 { /* 0.4V-1.6625V -> 1.3V (Power tree requirements) */ regulator-min-microvolt = <1352000>; regulator-max-microvolt = <1352000>; regulator-boot-on; }; - pm2250_s4: s4 { + pm4125_s4: s4 { /* 1.2V-2.35V -> 2.05V (Power tree requirements) */ regulator-min-microvolt = <2072000>; regulator-max-microvolt = <2072000>; @@ -288,7 +306,7 @@ /* L1 - VDD_MX */ - pm2250_l2: l2 { + pm4125_l2: l2 { /* LPDDR4X VDD2 */ regulator-min-microvolt = <1136000>; regulator-max-microvolt = <1136000>; @@ -296,7 +314,7 @@ regulator-boot-on; }; - pm2250_l3: l3 { + pm4125_l3: l3 { /* LPDDR4X VDDQ */ regulator-min-microvolt = <616000>; regulator-max-microvolt = <616000>; @@ -304,14 +322,14 @@ regulator-boot-on; }; - pm2250_l4: l4 { + pm4125_l4: l4 { /* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2700000>; regulator-allow-set-load; }; - pm2250_l5: l5 { + pm4125_l5: l5 { /* CSI/DSI */ regulator-min-microvolt = <1232000>; regulator-max-microvolt = <1232000>; @@ -319,7 +337,7 @@ regulator-boot-on; }; - pm2250_l6: l6 { + pm4125_l6: l6 { /* DRAM PLL */ regulator-min-microvolt = <928000>; regulator-max-microvolt = <928000>; @@ -327,7 +345,7 @@ regulator-boot-on; }; - pm2250_l7: l7 { + pm4125_l7: l7 { /* Wi-Fi CX/MX */ regulator-min-microvolt = <664000>; regulator-max-microvolt = <664000>; @@ -338,20 +356,20 @@ * L9 - VDD_LPI_MX */ - pm2250_l10: l10 { + pm4125_l10: l10 { /* Wi-Fi RFA */ regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; }; - pm2250_l11: l11 { + pm4125_l11: l11 { /* GPS RF1 */ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-boot-on; }; - pm2250_l12: l12 { + pm4125_l12: l12 { /* USB PHYs */ regulator-min-microvolt = <928000>; regulator-max-microvolt = <928000>; @@ -359,7 +377,7 @@ regulator-boot-on; }; - pm2250_l13: l13 { + pm4125_l13: l13 { /* USB/QFPROM/PLLs */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -367,7 +385,7 @@ regulator-boot-on; }; - pm2250_l14: l14 { + pm4125_l14: l14 { /* SDHCI1 VQMMC */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -376,7 +394,7 @@ regulator-always-on; }; - pm2250_l15: l15 { + pm4125_l15: l15 { /* WCD/DSI/BT VDDIO */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -385,38 +403,38 @@ regulator-boot-on; }; - pm2250_l16: l16 { + pm4125_l16: l16 { /* GPS RF2 */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; }; - pm2250_l17: l17 { + pm4125_l17: l17 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; - pm2250_l18: l18 { + pm4125_l18: l18 { /* VDD_PXn */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm2250_l19: l19 { + pm4125_l19: l19 { /* VDD_PXn */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm2250_l20: l20 { + pm4125_l20: l20 { /* SDHCI1 VMMC */ regulator-min-microvolt = <2400000>; regulator-max-microvolt = <3600000>; regulator-allow-set-load; }; - pm2250_l21: l21 { + pm4125_l21: l21 { /* SDHCI2 VMMC */ regulator-min-microvolt = <2960000>; regulator-max-microvolt = <3300000>; @@ -424,7 +442,7 @@ regulator-boot-on; }; - pm2250_l22: l22 { + pm4125_l22: l22 { /* Wi-Fi */ regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3312000>; @@ -433,8 +451,8 @@ }; &sdhc_1 { - vmmc-supply = <&pm2250_l20>; - vqmmc-supply = <&pm2250_l14>; + vmmc-supply = <&pm4125_l20>; + vqmmc-supply = <&pm4125_l14>; pinctrl-0 = <&sdc1_state_on>; pinctrl-1 = <&sdc1_state_off>; pinctrl-names = "default", "sleep"; @@ -446,8 +464,8 @@ }; &sdhc_2 { - vmmc-supply = <&pm2250_l21>; - vqmmc-supply = <&pm2250_l4>; + vmmc-supply = <&pm4125_l21>; + vqmmc-supply = <&pm4125_l4>; cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; pinctrl-0 = <&sdc2_state_on &sd_det_in_on>; pinctrl-1 = <&sdc2_state_off &sd_det_in_off>; @@ -518,8 +536,8 @@ }; &usb_qmpphy { - vdda-phy-supply = <&pm2250_l12>; - vdda-pll-supply = <&pm2250_l13>; + vdda-phy-supply = <&pm4125_l12>; + vdda-pll-supply = <&pm4125_l13>; status = "okay"; }; @@ -528,17 +546,17 @@ }; &usb_hsphy { - vdd-supply = <&pm2250_l12>; - vdda-pll-supply = <&pm2250_l13>; - vdda-phy-dpdm-supply = <&pm2250_l21>; + vdd-supply = <&pm4125_l12>; + vdda-pll-supply = <&pm4125_l13>; + vdda-phy-dpdm-supply = <&pm4125_l21>; status = "okay"; }; &wifi { - vdd-0.8-cx-mx-supply = <&pm2250_l7>; - vdd-1.8-xo-supply = <&pm2250_l13>; - vdd-1.3-rfa-supply = <&pm2250_l10>; - vdd-3.3-ch0-supply = <&pm2250_l22>; + vdd-0.8-cx-mx-supply = <&pm4125_l7>; + vdd-1.8-xo-supply = <&pm4125_l13>; + vdd-1.3-rfa-supply = <&pm4125_l10>; + vdd-3.3-ch0-supply = <&pm4125_l22>; qcom,ath10k-calibration-variant = "Thundercomm_RB1"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index 7c19f874fa71..696d6d43c56b 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -6,8 +6,10 @@ /dts-v1/; #include <dt-bindings/leds/common.h> +#include <dt-bindings/usb/pd.h> #include "sm4250.dtsi" #include "pm6125.dtsi" +#include "pmi632.dtsi" / { model = "Qualcomm Technologies, Inc. QRB4210 RB2"; @@ -256,6 +258,46 @@ }; }; +&pmi632_typec { + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pmi632_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + pmi632_ss_in: endpoint { + remote-endpoint = <&usb_qmpphy_out>; + }; + }; + }; + }; +}; + +&pmi632_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; + status = "okay"; +}; + &pon_pwrkey { status = "okay"; }; @@ -607,8 +649,8 @@ status = "okay"; }; -&usb_dwc3 { - maximum-speed = "super-speed"; +&usb_dwc3_hs { + remote-endpoint = <&pmi632_hs_in>; }; &usb_hsphy { @@ -626,6 +668,10 @@ status = "okay"; }; +&usb_qmpphy_out { + remote-endpoint = <&pmi632_ss_in>; +}; + &wifi { vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>; vdd-1.8-xo-supply = <&vreg_l16a_1p3>; diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index fd253942e5e5..78e933c42c31 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -108,6 +108,13 @@ }; }; }; + + reserved-memory { + gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + }; }; &apps_rsc { @@ -266,6 +273,48 @@ status = "okay"; }; +&i2c12 { + pinctrl-0 = <&qup1_i2c4_state>; + pinctrl-names = "default"; + + status = "okay"; + + vdd_gfx: regulator@39 { + compatible = "maxim,max20411"; + reg = <0x39>; + + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + + enable-gpios = <&pmm8540a_gpios 2 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&max20411_en>; + pinctrl-names = "default"; + }; +}; + +&gpucc { + vdd-gfx-supply = <&vdd_gfx>; + status = "okay"; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sa8295p/a690_zap.mbn"; + }; +}; + +&gpu_smmu { + status = "okay"; +}; + &mdss0 { status = "okay"; }; @@ -476,6 +525,10 @@ status = "okay"; }; +&qup1 { + status = "okay"; +}; + &qup2 { status = "okay"; }; @@ -636,6 +689,14 @@ /* PINCTRL */ +&pmm8540a_gpios { + max20411_en: max20411-en-state { + pins = "gpio2"; + function = "normal"; + output-enable; + }; +}; + &tlmm { pcie2a_default: pcie2a-default-state { clkreq-n-pins { @@ -728,4 +789,11 @@ bias-pull-up; }; }; + + qup1_i2c4_state: qup1-i2c4-state { + pins = "gpio0", "gpio1"; + function = "qup12"; + drive-strength = <2>; + bias-pull-up; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts index b04f72ec097c..177b9dad6ff7 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -376,14 +376,14 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie2a_default>; - status = "okay"; + status = "disabled"; }; &pcie2a_phy { vdda-phy-supply = <&vreg_l11a>; vdda-pll-supply = <&vreg_l3a>; - status = "okay"; + status = "disabled"; }; &pcie3a { diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi index 96b2c59ad02b..23888029cc11 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi @@ -168,6 +168,9 @@ }; &gpucc { + /* SA8295P and SA8540P doesn't provide gfx.lvl */ + /delete-property/ power-domains; + status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index a7eaca33d326..231cea1f0fa8 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -356,13 +356,18 @@ no-map; }; + ddr_training_checksum: ddr-training-checksum@908c0000 { + reg = <0x0 0x908c0000 0x0 0x1000>; + no-map; + }; + reserved_mem: reserved@908f0000 { - reg = <0x0 0x908f0000 0x0 0xf000>; + reg = <0x0 0x908f0000 0x0 0xe000>; no-map; }; - secdata_apss_mem: secdata-apss@908ff000 { - reg = <0x0 0x908ff000 0x0 0x1000>; + secdata_apss_mem: secdata-apss@908fe000 { + reg = <0x0 0x908fe000 0x0 0x2000>; no-map; }; @@ -373,8 +378,43 @@ hwlocks = <&tcsr_mutex 3>; }; - cpucp_fw_mem: cpucp-fw@90b00000 { - reg = <0x0 0x90b00000 0x0 0x100000>; + tz_sail_mailbox_mem: tz-sail-mailbox@90c00000 { + reg = <0x0 0x90c00000 0x0 0x100000>; + no-map; + }; + + sail_mailbox_mem: sail-ss@90d00000 { + reg = <0x0 0x90d00000 0x0 0x100000>; + no-map; + }; + + sail_ota_mem: sail-ss@90e00000 { + reg = <0x0 0x90e00000 0x0 0x300000>; + no-map; + }; + + aoss_backup_mem: aoss-backup@91b00000 { + reg = <0x0 0x91b00000 0x0 0x40000>; + no-map; + }; + + cpucp_backup_mem: cpucp-backup@91b40000 { + reg = <0x0 0x91b40000 0x0 0x40000>; + no-map; + }; + + tz_config_backup_mem: tz-config-backup@91b80000 { + reg = <0x0 0x91b80000 0x0 0x10000>; + no-map; + }; + + ddr_training_data_mem: ddr-training-data@91b90000 { + reg = <0x0 0x91b90000 0x0 0x10000>; + no-map; + }; + + cdt_data_backup_mem: cdt-data-backup@91ba0000 { + reg = <0x0 0x91ba0000 0x0 0x1000>; no-map; }; @@ -433,13 +473,43 @@ no-map; }; + audio_mdf_mem: audio-mdf-region@ae000000 { + reg = <0x0 0xae000000 0x0 0x1000000>; + no-map; + }; + + firmware_mem: firmware-region@b0000000 { + reg = <0x0 0xb0000000 0x0 0x800000>; + no-map; + }; + hyptz_reserved_mem: hyptz-reserved@beb00000 { reg = <0x0 0xbeb00000 0x0 0x11500000>; no-map; }; - tz_stat_mem: tz-stat@d0000000 { - reg = <0x0 0xd0000000 0x0 0x100000>; + scmi_mem: scmi-region@d0000000 { + reg = <0x0 0xd0000000 0x0 0x40000>; + no-map; + }; + + firmware_logs_mem: firmware-logs@d0040000 { + reg = <0x0 0xd0040000 0x0 0x10000>; + no-map; + }; + + firmware_audio_mem: firmware-audio@d0050000 { + reg = <0x0 0xd0050000 0x0 0x4000>; + no-map; + }; + + firmware_reserved_mem: firmware-reserved@d0054000 { + reg = <0x0 0xd0054000 0x0 0x9c000>; + no-map; + }; + + firmware_quantum_test_mem: firmware-quantum-test@d00f0000 { + reg = <0x0 0xd00f0000 0x0 0x10000>; no-map; }; @@ -453,8 +523,23 @@ no-map; }; - trusted_apps_mem: trusted-apps@d1800000 { - reg = <0x0 0xd1800000 0x0 0x3900000>; + deepsleep_backup_mem: deepsleep-backup@d1800000 { + reg = <0x0 0xd1800000 0x0 0x100000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@d1900000 { + reg = <0x0 0xd1900000 0x0 0x3800000>; + no-map; + }; + + tz_stat_mem: tz-stat@db100000 { + reg = <0x0 0xdb100000 0x0 0x100000>; + no-map; + }; + + cpucp_fw_mem: cpucp-fw@db200000 { + reg = <0x0 0xdb200000 0x0 0x100000>; no-map; }; }; @@ -1615,10 +1700,12 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, <&pdc 12 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pwr_event", + "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; @@ -1702,10 +1789,12 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, <&pdc 8 IRQ_TYPE_EDGE_BOTH>, <&pdc 7 IRQ_TYPE_EDGE_BOTH>, <&pdc 13 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pwr_event", + "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; @@ -1765,9 +1854,11 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, <&pdc 10 IRQ_TYPE_EDGE_BOTH>, <&pdc 9 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "pwr_event", + "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq"; @@ -2394,8 +2485,9 @@ <0x0 0x23016000 0x0 0x100>; reg-names = "stmmaceth", "rgmii"; - interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; + interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "sfty"; clocks = <&gcc GCC_EMAC1_AXI_CLK>, <&gcc GCC_EMAC1_SLV_AHB_CLK>, @@ -2427,8 +2519,9 @@ <0x0 0x23056000 0x0 0x100>; reg-names = "stmmaceth", "rgmii"; - interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; + interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "sfty"; clocks = <&gcc GCC_EMAC0_AXI_CLK>, <&gcc GCC_EMAC0_SLV_AHB_CLK>, diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 46aaeba28604..f3a6da8b2890 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -649,6 +649,7 @@ ap_ec_spi: &spi6 { pinctrl-names = "default"; pinctrl-0 = <&ap_ec_int_l>; spi-max-frequency = <3000000>; + wakeup-source; cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 4dcaa15caef2..2b481e20ae38 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -817,7 +817,7 @@ bits = <1 3>; }; - gpu_speed_bin: gpu_speed_bin@1d2 { + gpu_speed_bin: gpu-speed-bin@1d2 { reg = <0x1d2 0x2>; bits = <5 8>; }; @@ -1532,6 +1532,76 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sc7180-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <1>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xa0 0x0>; + + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk"; + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>; + freq-table-hz = <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + + qcom,ice = <&ice>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sc7180-qmp-ufs-phy", + "qcom,sm7150-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1000>; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + #phy-cells = <0>; + status = "disabled"; + }; + + ice: crypto@1d90000 { + compatible = "qcom,sc7180-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0 0x01d90000 0 0x8000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + ipa: ipa@1e40000 { compatible = "qcom,sc7180-ipa"; @@ -2964,12 +3034,16 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>, <&pdc 8 IRQ_TYPE_EDGE_BOTH>, - <&pdc 9 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; required-opps = <&rpmhpd_opp_nom>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index c4d00a81da39..cecb3e89f7f7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -18,6 +18,7 @@ */ /delete-node/ &cdsp_mem; +/delete-node/ &domain_idle_states; /delete-node/ &gpu_zap_mem; /delete-node/ &gpu_zap_shader; /delete-node/ &hyp_mem; @@ -26,6 +27,18 @@ /delete-node/ &sec_apps_mem; / { + cpus { + domain_idle_states: domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x40003444>; + entry-latency-us = <2752>; + exit-latency-us = <6562>; + min-residency-us = <9926>; + }; + }; + }; + reserved-memory { camera_mem: memory@8ad00000 { reg = <0x0 0x8ad00000 0x0 0x500000>; @@ -39,6 +52,10 @@ }; }; +&CLUSTER_PD { + domain-idle-states = <&CLUSTER_SLEEP_0>; +}; + &lpass_aon { status = "okay"; }; @@ -119,6 +136,17 @@ dma-coherent; }; +&venus { + iommus = <&apps_smmu 0x2180 0x20>, + <&apps_smmu 0x2184 0x20>; + + status = "okay"; + + video-firmware { + iommus = <&apps_smmu 0x21a2 0x0>; + }; +}; + &watchdog { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 9ea6636125ad..2ba4ea60cb14 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -548,6 +548,7 @@ ap_ec_spi: &spi10 { pinctrl-names = "default"; pinctrl-0 = <&ap_ec_int_l>; spi-max-frequency = <3000000>; + wakeup-source; cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi index ebae545c587c..fbfac7534d3c 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi @@ -19,6 +19,7 @@ ap_ec_spi: &spi10 { pinctrl-names = "default"; pinctrl-0 = <&ap_ec_int_l>; spi-max-frequency = <3000000>; + wakeup-source; cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 83b5b76ba179..7e7f0f0fb41b 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -202,6 +202,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_0>; operating-points-v2 = <&cpu0_opp_table>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -229,6 +231,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_100>; operating-points-v2 = <&cpu0_opp_table>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -251,6 +255,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_200>; operating-points-v2 = <&cpu0_opp_table>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -273,6 +279,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_300>; operating-points-v2 = <&cpu0_opp_table>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -295,6 +303,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_400>; operating-points-v2 = <&cpu4_opp_table>; + capacity-dmips-mhz = <1946>; + dynamic-power-coefficient = <520>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -317,6 +327,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_500>; operating-points-v2 = <&cpu4_opp_table>; + capacity-dmips-mhz = <1946>; + dynamic-power-coefficient = <520>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -339,6 +351,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_600>; operating-points-v2 = <&cpu4_opp_table>; + capacity-dmips-mhz = <1946>; + dynamic-power-coefficient = <520>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -361,6 +375,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_700>; operating-points-v2 = <&cpu7_opp_table>; + capacity-dmips-mhz = <1985>; + dynamic-power-coefficient = <552>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 2>; @@ -453,15 +469,29 @@ }; }; - domain-idle-states { - CLUSTER_SLEEP_0: cluster-sleep-0 { + domain_idle_states: domain-idle-states { + CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-down"; - arm,psci-suspend-param = <0x40003444>; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <2752>; + exit-latency-us = <3048>; + min-residency-us = <6118>; + }; + + CLUSTER_SLEEP_CX_RET: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41001344>; entry-latency-us = <3263>; + exit-latency-us = <4562>; + min-residency-us = <8467>; + }; + + CLUSTER_SLEEP_LLCC_OFF: cluster-sleep-2 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100b344>; + entry-latency-us = <3638>; exit-latency-us = <6562>; - min-residency-us = <9926>; - local-timer-stop; + min-residency-us = <9826>; }; }; }; @@ -872,7 +902,7 @@ CLUSTER_PD: power-domain-cluster { #power-domain-cells = <0>; - domain-idle-states = <&CLUSTER_SLEEP_0>; + domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_CX_RET &CLUSTER_SLEEP_LLCC_OFF>; }; }; @@ -966,7 +996,7 @@ #address-cells = <1>; #size-cells = <1>; - gpu_speed_bin: gpu_speed_bin@1e9 { + gpu_speed_bin: gpu-speed-bin@1e9 { reg = <0x1e9 0x2>; bits = <5 8>; }; @@ -2178,8 +2208,16 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, @@ -2345,6 +2383,8 @@ <&apps_smmu 0x4e6 0x0011>; qcom,ee = <0>; qcom,controlled-remotely; + num-channels = <16>; + qcom,num-ees = <4>; }; crypto: crypto@1dfa000 { @@ -2648,6 +2688,31 @@ status = "disabled"; }; + slimbam: dma-controller@3a84000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0 0x03a84000 0 0x20000>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,controlled-remotely; + num-channels = <31>; + qcom,ee = <1>; + qcom,num-ees = <2>; + iommus = <&apps_smmu 0x1826 0x0>; + status = "disabled"; + }; + + slim: slim-ngd@3ac0000 { + compatible = "qcom,slim-ngd-v1.5.0"; + reg = <0 0x03ac0000 0 0x2c000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x1826 0x0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + lpass_hm: clock-controller@3c00000 { compatible = "qcom,sc7280-lpasshm"; reg = <0 0x03c00000 0 0x28>; @@ -3582,10 +3647,12 @@ <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, <&pdc 12 IRQ_TYPE_EDGE_BOTH>, <&pdc 13 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", + interrupt-names = "pwr_event", + "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq"; @@ -4035,11 +4102,13 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", + interrupt-names = "pwr_event", + "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; @@ -4065,6 +4134,25 @@ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; }; @@ -4091,10 +4179,11 @@ <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "cpu-cfg", "video-mem"; - iommus = <&apps_smmu 0x2180 0x20>, - <&apps_smmu 0x2184 0x20>; + iommus = <&apps_smmu 0x2180 0x20>; memory-region = <&video_mem>; + status = "disabled"; + video-decoder { compatible = "venus-decoder"; }; @@ -4103,10 +4192,6 @@ compatible = "venus-encoder"; }; - video-firmware { - iommus = <&apps_smmu 0x21a2 0x0>; - }; - venus_opp_table: opp-table { compatible = "operating-points-v2"; diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index 0430d99091e3..32afc78d5b76 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -290,7 +290,7 @@ BIG_CPU_SLEEP_0: cpu-sleep-1-0 { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <241>; + entry-latency-us = <2411>; exit-latency-us = <1461>; min-residency-us = <4488>; local-timer-stop; @@ -298,7 +298,15 @@ }; domain-idle-states { - CLUSTER_SLEEP_0: cluster-sleep-0 { + CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <3300>; + exit-latency-us = <3300>; + min-residency-us = <6000>; + }; + + CLUSTER_SLEEP_AOSS_SLEEP: cluster-sleep-1 { compatible = "domain-idle-state"; arm,psci-suspend-param = <0x4100a344>; entry-latency-us = <3263>; @@ -582,7 +590,7 @@ CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; - domain-idle-states = <&CLUSTER_SLEEP_0>; + domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_AOSS_SLEEP>; }; }; @@ -782,6 +790,7 @@ clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + power-domains = <&rpmhpd SC8180X_CX>; }; qupv3_id_0: geniqup@8c0000 { @@ -1708,8 +1717,22 @@ ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1805,8 +1828,22 @@ ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1903,8 +1940,22 @@ ranges = <0x01000000 0x0 0x68200000 0x0 0x68200000 0x0 0x100000>, <0x02000000 0x0 0x68300000 0x0 0x68300000 0x0 0x3d00000>; - interrupts = <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2001,8 +2052,22 @@ ranges = <0x01000000 0x0 0x70200000 0x0 0x70200000 0x0 0x100000>, <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>; - interrupts = <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 670 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2131,9 +2196,11 @@ reg = <0 0x01d87000 0 0x1000>; clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_MEM_CLKREF_EN>; clock-names = "ref", - "ref_aux"; + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -2173,6 +2240,8 @@ interconnect-names = "gfx-mem"; qcom,gmu = <&gmu>; + #cooling-cells = <2>; + status = "disabled"; gpu_opp_table: opp-table { @@ -2692,9 +2761,15 @@ interrupt-controller; #interrupt-cells = <1>; - interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, - <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; - interconnect-names = "mdp0-mem", "mdp1-mem"; + interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&mmss_noc MASTER_MDP_PORT1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; iommus = <&apps_smmu 0x800 0x420>; @@ -2723,10 +2798,8 @@ "rot", "lut"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - assigned-clock-rates = <460000000>, - <19200000>; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; power-domains = <&rpmhpd SC8180X_MMCX>; @@ -3184,7 +3257,7 @@ <&dispcc DISP_CC_MDSS_AHB_CLK>; clock-names = "aux", "cfg_ahb"; - power-domains = <&dispcc MDSS_GDSC>; + power-domains = <&rpmhpd SC8180X_MX>; #clock-cells = <1>; #phy-cells = <0>; @@ -3210,6 +3283,7 @@ "edp_phy_pll_link_clk", "edp_phy_pll_vco_div_clk"; power-domains = <&rpmhpd SC8180X_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -3248,7 +3322,7 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp"; - reg = <0x0 0x0c300000 0x0 0x100000>; + reg = <0x0 0x0c300000 0x0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; @@ -3256,6 +3330,11 @@ #power-domain-cells = <1>; }; + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0x0 0x0c3f0000 0x0 0x400>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c440000 0x0 0x0001100>, @@ -3880,8 +3959,15 @@ thermal-sensors = <&tsens0 15>; + cooling-maps { + map0 { + trip = <&gpu_top_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu_top_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -4030,8 +4116,15 @@ thermal-sensors = <&tsens1 11>; + cooling-maps { + map0 { + trip = <&gpu_bottom_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu_bottom_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index def3976bd5bb..a0fdef55a40a 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -6,10 +6,8 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> -#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> -#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> @@ -853,27 +851,6 @@ }; &pmk8280_vadc { - status = "okay"; - - channel@3 { - reg = <PMK8350_ADC7_DIE_TEMP>; - qcom,pre-scaling = <1 1>; - label = "pmk8350_die_temp"; - }; - - channel@44 { - reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; - qcom,hw-settle-time = <200>; - qcom,ratiometric; - label = "pmk8350_xo_therm"; - }; - - channel@103 { - reg = <PM8350_ADC7_DIE_TEMP(1)>; - qcom,pre-scaling = <1 1>; - label = "pmc8280_1_die_temp"; - }; - channel@144 { reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; qcom,hw-settle-time = <200>; @@ -902,12 +879,6 @@ label = "sys_therm4"; }; - channel@303 { - reg = <PM8350_ADC7_DIE_TEMP(3)>; - qcom,pre-scaling = <1 1>; - label = "pmc8280_2_die_temp"; - }; - channel@344 { reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>; qcom,hw-settle-time = <200>; @@ -935,12 +906,6 @@ qcom,ratiometric; label = "sys_therm8"; }; - - channel@403 { - reg = <PMR735A_ADC7_DIE_TEMP>; - qcom,pre-scaling = <1 1>; - label = "pmr735a_die_temp"; - }; }; &qup0 { @@ -1202,7 +1167,7 @@ }; &vamacro { - pinctrl-0 = <&dmic01_default>, <&dmic02_default>; + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; pinctrl-names = "default"; vdd-micb-supply = <&vreg_s10b>; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index 80ee12ded4f4..945de77911de 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -3,6 +3,9 @@ * Copyright (c) 2022, Linaro Limited */ +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> @@ -84,7 +87,37 @@ #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; - status = "disabled"; + + channel@3 { + reg = <PMK8350_ADC7_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "pmk8350_die_temp"; + }; + + channel@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "pmk8350_xo_therm"; + }; + + channel@103 { + reg = <PM8350_ADC7_DIE_TEMP(1)>; + qcom,pre-scaling = <1 1>; + label = "pmc8280_1_die_temp"; + }; + + channel@303 { + reg = <PM8350_ADC7_DIE_TEMP(3)>; + qcom,pre-scaling = <1 1>; + label = "pmc8280_2_die_temp"; + }; + + channel@403 { + reg = <PMR735A_ADC7_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "pmr735a_die_temp"; + }; }; pmk8280_adc_tm: adc-tm@3400 { @@ -126,6 +159,8 @@ compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(1)>; + io-channel-names = "thermal"; #thermal-sensor-cells = <0>; }; @@ -178,6 +213,8 @@ compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(3)>; + io-channel-names = "thermal"; #thermal-sensor-cells = <0>; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index febf28356ff8..a5b194813079 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -2257,9 +2257,12 @@ compatible = "qcom,sc8280xp-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; - clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_CARD_CLKREF_CLK>; + clock-names = "ref", + "ref_aux", + "qref"; power-domains = <&gcc UFS_PHY_GDSC>; @@ -2319,9 +2322,12 @@ compatible = "qcom,sc8280xp-qmp-ufs-phy"; reg = <0 0x01da7000 0 0x1000>; - clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>, - <&gcc GCC_UFS_CARD_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_CARD_PHY_AUX_CLK>, + <&gcc GCC_UFS_1_CARD_CLKREF_CLK>; + clock-names = "ref", + "ref_aux", + "qref"; power-domains = <&gcc UFS_CARD_GDSC>; @@ -2978,7 +2984,7 @@ }; }; - dmic02_default: dmic02-default-state { + dmic23_default: dmic23-default-state { clk-pins { pins = "gpio8"; function = "dmic2_clk"; @@ -2994,7 +3000,7 @@ }; }; - dmic02_sleep: dmic02-sleep-state { + dmic23_sleep: dmic23-sleep-state { clk-pins { pins = "gpio8"; function = "dmic2_clk"; @@ -3451,6 +3457,404 @@ }; }; + cci0: cci@ac4a000 { + compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4a000 0 0x1000>; + + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_SLOW_AHB_CLK_SRC>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CCI_0_CLK>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci"; + + power-domains = <&camcc TITAN_TOP_GDSC>; + + pinctrl-0 = <&cci0_default>; + pinctrl-1 = <&cci0_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac4b000 { + compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4b000 0 0x1000>; + + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_SLOW_AHB_CLK_SRC>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CCI_1_CLK>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci"; + + power-domains = <&camcc TITAN_TOP_GDSC>; + + pinctrl-0 = <&cci1_default>; + pinctrl-1 = <&cci1_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci2: cci@ac4c000 { + compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4c000 0 0x1000>; + + interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_SLOW_AHB_CLK_SRC>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CCI_2_CLK>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci"; + power-domains = <&camcc TITAN_TOP_GDSC>; + + pinctrl-0 = <&cci2_default>; + pinctrl-1 = <&cci2_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci2_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci2_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci3: cci@ac4d000 { + compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4d000 0 0x1000>; + + interrupts = <GIC_SPI 650 IRQ_TYPE_EDGE_RISING>; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_SLOW_AHB_CLK_SRC>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CCI_3_CLK>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci"; + + power-domains = <&camcc TITAN_TOP_GDSC>; + + pinctrl-0 = <&cci3_default>; + pinctrl-1 = <&cci3_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci3_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci3_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + camss: camss@ac5a000 { + compatible = "qcom,sc8280xp-camss"; + + reg = <0 0x0ac5a000 0 0x2000>, + <0 0x0ac5c000 0 0x2000>, + <0 0x0ac65000 0 0x2000>, + <0 0x0ac67000 0 0x2000>, + <0 0x0acaf000 0 0x4000>, + <0 0x0acb3000 0 0x1000>, + <0 0x0acb6000 0 0x4000>, + <0 0x0acba000 0 0x1000>, + <0 0x0acbd000 0 0x4000>, + <0 0x0acc1000 0 0x1000>, + <0 0x0acc4000 0 0x4000>, + <0 0x0acc8000 0 0x1000>, + <0 0x0accb000 0 0x4000>, + <0 0x0accf000 0 0x1000>, + <0 0x0acd2000 0 0x4000>, + <0 0x0acd6000 0 0x1000>, + <0 0x0acd9000 0 0x4000>, + <0 0x0acdd000 0 0x1000>, + <0 0x0ace0000 0 0x4000>, + <0 0x0ace4000 0 0x1000>; + reg-names = "csiphy2", + "csiphy3", + "csiphy0", + "csiphy1", + "vfe0", + "csid0", + "vfe1", + "csid1", + "vfe2", + "csid2", + "vfe_lite0", + "csid0_lite", + "vfe_lite1", + "csid1_lite", + "vfe_lite2", + "csid2_lite", + "vfe_lite3", + "csid3_lite", + "vfe3", + "csid3"; + + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "csid1_lite", + "vfe_lite1", + "csiphy3", + "csid0", + "vfe0", + "csid1", + "vfe1", + "csid0_lite", + "vfe_lite0", + "csiphy0", + "csiphy1", + "csiphy2", + "csid2", + "vfe2", + "csid3_lite", + "csid2_lite", + "vfe_lite3", + "vfe_lite2", + "csid3", + "vfe3"; + + power-domains = <&camcc IFE_0_GDSC>, + <&camcc IFE_1_GDSC>, + <&camcc IFE_2_GDSC>, + <&camcc IFE_3_GDSC>, + <&camcc TITAN_TOP_GDSC>; + power-domain-names = "ife0", + "ife1", + "ife2", + "ife3", + "top"; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CSIPHY0_CLK>, + <&camcc CAMCC_CSI0PHYTIMER_CLK>, + <&camcc CAMCC_CSIPHY1_CLK>, + <&camcc CAMCC_CSI1PHYTIMER_CLK>, + <&camcc CAMCC_CSIPHY2_CLK>, + <&camcc CAMCC_CSI2PHYTIMER_CLK>, + <&camcc CAMCC_CSIPHY3_CLK>, + <&camcc CAMCC_CSI3PHYTIMER_CLK>, + <&camcc CAMCC_IFE_0_AXI_CLK>, + <&camcc CAMCC_IFE_0_CLK>, + <&camcc CAMCC_IFE_0_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_0_CSID_CLK>, + <&camcc CAMCC_IFE_1_AXI_CLK>, + <&camcc CAMCC_IFE_1_CLK>, + <&camcc CAMCC_IFE_1_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_1_CSID_CLK>, + <&camcc CAMCC_IFE_2_AXI_CLK>, + <&camcc CAMCC_IFE_2_CLK>, + <&camcc CAMCC_IFE_2_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_2_CSID_CLK>, + <&camcc CAMCC_IFE_3_AXI_CLK>, + <&camcc CAMCC_IFE_3_CLK>, + <&camcc CAMCC_IFE_3_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_3_CSID_CLK>, + <&camcc CAMCC_IFE_LITE_0_CLK>, + <&camcc CAMCC_IFE_LITE_0_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_LITE_0_CSID_CLK>, + <&camcc CAMCC_IFE_LITE_1_CLK>, + <&camcc CAMCC_IFE_LITE_1_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_LITE_1_CSID_CLK>, + <&camcc CAMCC_IFE_LITE_2_CLK>, + <&camcc CAMCC_IFE_LITE_2_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_LITE_2_CSID_CLK>, + <&camcc CAMCC_IFE_LITE_3_CLK>, + <&camcc CAMCC_IFE_LITE_3_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_LITE_3_CSID_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&gcc GCC_CAMERA_SF_AXI_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_csid", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_csid", + "vfe2_axi", + "vfe2", + "vfe2_cphy_rx", + "vfe2_csid", + "vfe3_axi", + "vfe3", + "vfe3_cphy_rx", + "vfe3_csid", + "vfe_lite0", + "vfe_lite0_cphy_rx", + "vfe_lite0_csid", + "vfe_lite1", + "vfe_lite1_cphy_rx", + "vfe_lite1_csid", + "vfe_lite2", + "vfe_lite2_cphy_rx", + "vfe_lite2_csid", + "vfe_lite3", + "vfe_lite3_cphy_rx", + "vfe_lite3_csid", + "gcc_axi_hf", + "gcc_axi_sf"; + + iommus = <&apps_smmu 0x2000 0x4e0>, + <&apps_smmu 0x2020 0x4e0>, + <&apps_smmu 0x2040 0x4e0>, + <&apps_smmu 0x2060 0x4e0>, + <&apps_smmu 0x2080 0x4e0>, + <&apps_smmu 0x20e0 0x4e0>, + <&apps_smmu 0x20c0 0x4e0>, + <&apps_smmu 0x20a0 0x4e0>, + <&apps_smmu 0x2400 0x4e0>, + <&apps_smmu 0x2420 0x4e0>, + <&apps_smmu 0x2440 0x4e0>, + <&apps_smmu 0x2460 0x4e0>, + <&apps_smmu 0x2480 0x4e0>, + <&apps_smmu 0x24e0 0x4e0>, + <&apps_smmu 0x24c0 0x4e0>, + <&apps_smmu 0x24a0 0x4e0>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>, + <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "cam_ahb", + "cam_hf_mnoc", + "cam_sf_mnoc", + "cam_sf_icp_mnoc"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + port@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + camcc: clock-controller@ad00000 { compatible = "qcom,sc8280xp-camcc"; reg = <0 0x0ad00000 0 0x20000>; @@ -4011,6 +4415,28 @@ interrupt-controller; }; + tsens2: thermal-sensor@c251000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c251000 0 0x1ff>, + <0 0x0c224000 0 0x8>; + #qcom,sensors = <11>; + interrupts-extended = <&pdc 122 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 124 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens3: thermal-sensor@c252000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c252000 0 0x1ff>, + <0 0x0c225000 0 0x8>; + #qcom,sensors = <5>; + interrupts-extended = <&pdc 123 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 125 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + tsens0: thermal-sensor@c263000 { compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; reg = <0 0x0c263000 0 0x1ff>, /* TM */ @@ -4076,6 +4502,150 @@ #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 230>; wakeup-parent = <&pdc>; + + cci0_default: cci0-default-state { + cci0_i2c0_default: cci0-i2c0-default-pins { + /* cci_i2c_sda0, cci_i2c_scl0 */ + pins = "gpio113", "gpio114"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_i2c1_default: cci0-i2c1-default-pins { + /* cci_i2c_sda1, cci_i2c_scl1 */ + pins = "gpio115", "gpio116"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + cci0_sleep: cci0-sleep-state { + cci0_i2c0_sleep: cci0-i2c0-sleep-pins { + /* cci_i2c_sda0, cci_i2c_scl0 */ + pins = "gpio113", "gpio114"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci0_i2c1_sleep: cci0-i2c1-sleep-pins { + /* cci_i2c_sda1, cci_i2c_scl1 */ + pins = "gpio115", "gpio116"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci1_default: cci1-default-state { + cci1_i2c0_default: cci1-i2c0-default-pins { + /* cci_i2c_sda2, cci_i2c_scl2 */ + pins = "gpio10","gpio11"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci1_i2c1_default: cci1-i2c1-default-pins { + /* cci_i2c_sda3, cci_i2c_scl3 */ + pins = "gpio123","gpio124"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + cci1_sleep: cci1-sleep-state { + cci1_i2c0_sleep: cci1-i2c0-sleep-pins { + /* cci_i2c_sda2, cci_i2c_scl2 */ + pins = "gpio10","gpio11"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci1_i2c1_sleep: cci1-i2c1-sleep-pins { + /* cci_i2c_sda3, cci_i2c_scl3 */ + pins = "gpio123","gpio124"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci2_default: cci2-default-state { + cci2_i2c0_default: cci2-i2c0-default-pins { + /* cci_i2c_sda4, cci_i2c_scl4 */ + pins = "gpio117","gpio118"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci2_i2c1_default: cci2-i2c1-default-pins { + /* cci_i2c_sda5, cci_i2c_scl5 */ + pins = "gpio12","gpio13"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + cci2_sleep: cci2-sleep-state { + cci2_i2c0_sleep: cci2-i2c0-sleep-pins { + /* cci_i2c_sda4, cci_i2c_scl4 */ + pins = "gpio117","gpio118"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci2_i2c1_sleep: cci2-i2c1-sleep-pins { + /* cci_i2c_sda5, cci_i2c_scl5 */ + pins = "gpio12","gpio13"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci3_default: cci3-default-state { + cci3_i2c0_default: cci3-i2c0-default-pins { + /* cci_i2c_sda6, cci_i2c_scl6 */ + pins = "gpio145","gpio146"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci3_i2c1_default: cci3-i2c1-default-pins { + /* cci_i2c_sda7, cci_i2c_scl7 */ + pins = "gpio164","gpio165"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + cci3_sleep: cci3-sleep-state { + cci3_i2c0_sleep: cci3-i2c0-sleep-pins { + /* cci_i2c_sda6, cci_i2c_scl6 */ + pins = "gpio145","gpio146"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci3_i2c1_sleep: cci3-i2c1-sleep-pins { + /* cci_i2c_sda7, cci_i2c_scl7 */ + pins = "gpio164","gpio165"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + }; }; apps_smmu: iommu@15000000 { @@ -5212,6 +5782,21 @@ }; }; + gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 2>; + + trips { + gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + mem-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts index 2ed39d402d3f..702ab49bbc59 100644 --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -461,3 +461,8 @@ dr_mode = "peripheral"; extcon = <&extcon_usb>; }; + +&usb3_qmpphy { + vdda-phy-supply = <&vreg_l1b_0p925>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts index 362be5719dd2..e27f3c5d5bba 100644 --- a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts +++ b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "msm8953.dtsi" +#include "sdm450.dtsi" #include "pm8953.dtsi" #include "pmi8950.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sdm450.dtsi b/arch/arm64/boot/dts/qcom/sdm450.dtsi new file mode 100644 index 000000000000..b222aeb459a3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm450.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz> */ + +#include "msm8953.dtsi" + +&gpu_opp_table { + /delete-node/ opp-650000000; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_turbo>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 87d0293c728d..819a5f8825e7 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -241,6 +241,16 @@ }; }; +&pm660l_wled { + status = "okay"; + + qcom,switching-freq = <800>; + qcom,ovp-millivolt = <29600>; + qcom,current-boost-limit = <970>; + qcom,current-limit-microamp = <17500>; + qcom,num-strings = <2>; +}; + &pon_pwrkey { status = "okay"; }; @@ -658,10 +668,16 @@ }; &usb3 { + qcom,select-utmi-as-pipe-clk; + status = "okay"; }; &usb3_dwc3 { + maximum-speed = "high-speed"; + phys = <&qusb2phy0>; + phy-names = "usb2-phy"; + dr_mode = "peripheral"; extcon = <&extcon_usb>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 513fe5e76b68..f5921b80ef94 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> #include <dt-bindings/soc/qcom,apr.h> / { @@ -1100,6 +1101,7 @@ interconnect-names = "gfx-mem"; operating-points-v2 = <&gpu_sdm630_opp_table>; + #cooling-cells = <2>; status = "disabled"; @@ -1281,12 +1283,16 @@ <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <120000000>; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; + interrupt-names = "pwr_event", + "qusb2_phy", + "hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB_30_GDSC>; - qcom,select-utmi-as-pipe-clk; resets = <&gcc GCC_USB_30_BCR>; @@ -1297,17 +1303,38 @@ snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - /* - * SDM630 technically supports USB3 but I - * haven't seen any devices making use of it. - */ - maximum-speed = "high-speed"; - phys = <&qusb2phy0>; - phy-names = "usb2-phy"; + phys = <&qusb2phy0>, <&usb3_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; snps,hird-threshold = /bits/ 8 <0>; }; }; + usb3_qmpphy: phy@c010000 { + compatible = "qcom,sdm660-qmp-usb3-phy"; + reg = <0x0c010000 0x1000>; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>; + + status = "disabled"; + }; + qusb2phy0: phy@c012000 { compatible = "qcom,sdm660-qusb2-phy"; reg = <0x0c012000 0x180>; @@ -1463,8 +1490,12 @@ <&gcc GCC_USB20_MASTER_CLK>; assigned-clock-rates = <19200000>, <60000000>; - interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy", + "hs_phy_irq"; qcom,select-utmi-as-pipe-clk; @@ -2551,6 +2582,13 @@ thermal-sensors = <&tsens 8>; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&adreno_gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { gpu_alert0: trip-point0 { temperature = <90000>; diff --git a/arch/arm64/boot/dts/qcom/sdm632.dtsi b/arch/arm64/boot/dts/qcom/sdm632.dtsi index 645b9f6a801f..95b025ea260b 100644 --- a/arch/arm64/boot/dts/qcom/sdm632.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm632.dtsi @@ -79,3 +79,11 @@ compatible = "qcom,kryo250"; capacity-dmips-mhz = <1980>; }; + +&gpu_opp_table { + opp-725000000 { + opp-hz = /bits/ 64 <725000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_turbo>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index 3c47410ba94c..7167f75bced3 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -413,10 +413,16 @@ }; &usb3 { + qcom,select-utmi-as-pipe-clk; + status = "okay"; }; &usb3_dwc3 { + maximum-speed = "high-speed"; + phys = <&qusb2phy0>; + phy-names = "usb2-phy"; + dr_mode = "peripheral"; extcon = <&extcon_usb>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index 4d7b77a23159..80e81c4233b3 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -1320,12 +1320,16 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>, <&pdc 8 IRQ_TYPE_EDGE_BOTH>, - <&pdc 9 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index 0ab5e8f53ac9..e8276db9eabb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -852,6 +852,7 @@ ap_ts_i2c: &i2c14 { pinctrl-names = "default"; pinctrl-0 = <&ec_ap_int_l>; spi-max-frequency = <3000000>; + wakeup-source; cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index ab6220456513..1f517328199b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -580,7 +580,7 @@ &pcie0 { status = "okay"; perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>; vddpe-3v3-supply = <&pcie0_3p3v_dual>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index e821103d49c0..46e25c53829a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -508,13 +508,13 @@ }; &q6afedai { - qi2s@22 { - reg = <22>; + dai@22 { + reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <1>; }; - qi2s@23 { - reg = <23>; + dai@23 { + reg = <QUATERNARY_MI2S_TX>; qcom,sd-lines = <0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index fbb8655653fb..486ce175e6bc 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -60,7 +60,7 @@ }; reserved-memory { - framebuffer_region@9d400000 { + framebuffer@9d400000 { reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>; no-map; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index c2244824355a..2f20be99ee7e 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2639,10 +2639,12 @@ compatible = "qcom,sdm845-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_MEM_CLKREF_CLK>; clock-names = "ref", - "ref_aux"; - clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -3366,8 +3368,8 @@ qcom,qmp = <&aoss_qmp>; - power-domains = <&rpmhpd SDM845_CX>, - <&rpmhpd SDM845_MX>; + power-domains = <&rpmhpd SDM845_LCX>, + <&rpmhpd SDM845_LMX>; power-domain-names = "lcx", "lmx"; memory-region = <&slpi_mem>; @@ -4058,12 +4060,16 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>, <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>, - <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -4109,12 +4115,16 @@ <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>, <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>, - <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; @@ -4760,6 +4770,7 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; @@ -5568,7 +5579,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster0_crit: cluster0_crit { + cluster0_crit: cluster0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -5588,7 +5599,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster1_crit: cluster1_crit { + cluster1_crit: cluster1-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -5602,8 +5613,15 @@ thermal-sensors = <&tsens0 11>; + cooling-maps { + map0 { + trip = <&gpu_top_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu1_alert0: trip-point0 { + gpu_top_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -5617,8 +5635,15 @@ thermal-sensors = <&tsens0 12>; + cooling-maps { + map0 { + trip = <&gpu_bottom_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu2_alert0: trip-point0 { + gpu_bottom_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi index 3e7ae3bebbe0..603c962661cc 100644 --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi @@ -17,7 +17,7 @@ chosen { }; - clocks{ + clocks { xo_board: xo-board { compatible = "fixed-clock"; clock-frequency = <76800000>; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 160e098f1075..d1aa2e57cb57 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/interconnect/qcom,sm6115.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -614,6 +615,11 @@ #hwlock-cells = <1>; }; + tcsr_regs: syscon@3c0000 { + compatible = "qcom,sm6115-tcsr", "syscon"; + reg = <0x0 0x003c0000 0x0 0x40000>; + }; + tlmm: pinctrl@500000 { compatible = "qcom,sm6115-tlmm"; reg = <0x0 0x00500000 0x0 0x400000>, @@ -878,8 +884,31 @@ clock-output-names = "usb3_phy_pipe_clk_src"; #phy-cells = <0>; + orientation-switch; + + qcom,tcsr-reg = <&tcsr_regs 0xb244>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_dwc3_ss>; + }; + }; + }; }; system_noc: interconnect@1880000 { @@ -1194,8 +1223,12 @@ compatible = "qcom,sm6115-qmp-ufs-phy"; reg = <0x0 0x04807000 0x0 0x1000>; - clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_CLKREF_CLK>; + clock-names = "ref", + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -1586,9 +1619,14 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <66666667>; - interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; + interrupt-names = "pwr_event", + "qusb2_phy", + "hs_phy_irq", + "ss_phy_irq"; resets = <&gcc GCC_USB30_PRIM_BCR>; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; @@ -1600,7 +1638,6 @@ interconnect-names = "usb-ddr", "apps-usb"; - qcom,select-utmi-as-pipe-clk; status = "disabled"; usb_dwc3: usb@4e00000 { @@ -1615,6 +1652,28 @@ snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; snps,usb3_lpm_capable; + + usb-role-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dwc3_ss: endpoint { + remote-endpoint = <&usb_qmpphy_usb_ss_in>; + }; + }; + }; }; }; @@ -1646,6 +1705,7 @@ nvmem-cells = <&gpu_speed_bin>; nvmem-cell-names = "speed_bin"; + #cooling-cells = <2>; status = "disabled"; @@ -3085,7 +3145,7 @@ type = "passive"; }; - cpu4_crit: cpu_crit { + cpu4_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3111,7 +3171,7 @@ type = "passive"; }; - cpu5_crit: cpu_crit { + cpu5_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3137,7 +3197,7 @@ type = "passive"; }; - cpu6_crit: cpu_crit { + cpu6_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3163,7 +3223,7 @@ type = "passive"; }; - cpu7_crit: cpu_crit { + cpu7_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3189,7 +3249,7 @@ type = "passive"; }; - cpu45_crit: cpu_crit { + cpu45_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3215,7 +3275,7 @@ type = "passive"; }; - cpu67_crit: cpu_crit { + cpu67_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3241,7 +3301,7 @@ type = "passive"; }; - cpu0123_crit: cpu_crit { + cpu0123_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3294,8 +3354,15 @@ polling-delay = <0>; thermal-sensors = <&tsens0 15>; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu_alert0: trip-point0 { temperature = <115000>; hysteresis = <5000>; type = "passive"; @@ -3304,7 +3371,7 @@ trip-point1 { temperature = <125000>; hysteresis = <1000>; - type = "passive"; + type = "critical"; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 1dd3a4056e26..98ab08356088 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -812,10 +812,12 @@ compatible = "qcom,sm6125-qmp-ufs-phy"; reg = <0x04807000 0xdb8>; - clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_MEM_CLKREF_CLK>; clock-names = "ref", - "ref_aux"; + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -1185,9 +1187,14 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <66666667>; - interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; + interrupt-names = "pwr_event", + "qusb2_phy", + "hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; qcom,select-utmi-as-pipe-clk; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 43cffe8e1247..24bcec3366ef 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -19,6 +19,7 @@ #include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -1189,10 +1190,12 @@ compatible = "qcom,sm6350-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_MEM_CLKREF_CLK>; clock-names = "ref", - "ref_aux"; - clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -1325,10 +1328,11 @@ qcom,gmu = <&gmu>; nvmem-cells = <&gpu_speed_bin>; nvmem-cell-names = "speed_bin"; + #cooling-cells = <2>; status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&pil_gpu_mem>; }; @@ -1439,8 +1443,6 @@ operating-points-v2 = <&gmu_opp_table>; - status = "disabled"; - gmu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -1830,12 +1832,15 @@ "mock_utmi"; interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>; - - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -1966,6 +1971,13 @@ interrupt-controller; #interrupt-cells = <1>; + interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + clocks = <&gcc GCC_DISP_AHB_CLK>, <&gcc GCC_DISP_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>; @@ -2698,6 +2710,569 @@ }; }; + thermal-zones { + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + audio-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 2>; + + trips { + audio-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_alert0>; + cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-left-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_left_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6-left-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_left_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-right-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu6_right_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6-right-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_right_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-left-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu7_left_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7-left-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_left_alert0>; + cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-right-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu7_right_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7-right-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_right_alert0>; + cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpuss0-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpuss1-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cwlan-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 1>; + + trips { + cwlan-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 3>; + + trips { + ddr-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 13>; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss0-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 14>; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss1-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + modem-core0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 6>; + + trips { + modem-core0-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem-core1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 7>; + + trips { + modem-core1-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem-scl-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 9>; + + trips { + modem-scl-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem-vec-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 8>; + + trips { + modem-vec-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + npu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 10>; + + trips { + npu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6-hvx-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 11>; + + trips { + video-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; clock-frequency = <19200000>; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index 7ac8bf26dda3..4386f8a9c636 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -1431,13 +1431,15 @@ assigned-clock-rates = <19200000>, <133333333>; interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, - <&mpm 12 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <&mpm 94 IRQ_TYPE_EDGE_BOTH>, <&mpm 93 IRQ_TYPE_EDGE_BOTH>, - <&mpm 94 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&mpm 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi index e55cd83c19b8..29289fa41b13 100644 --- a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi @@ -152,6 +152,9 @@ regulator-min-microvolt = <824000>; regulator-max-microvolt = <928000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l5a_2p7: ldo5 { @@ -188,6 +191,9 @@ regulator-min-microvolt = <1696000>; regulator-max-microvolt = <1952000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l13a_1p8: ldo13 { @@ -230,6 +236,9 @@ regulator-min-microvolt = <2696000>; regulator-max-microvolt = <3304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; }; @@ -258,6 +267,9 @@ regulator-min-microvolt = <1144000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l4c_1p8: ldo4 { @@ -398,6 +410,20 @@ }; }; +&ufs_mem_hc { + vcc-supply = <&vreg_l19a_3p0>; + vcc-max-microamp = <600000>; + vccq2-supply = <&vreg_l12a_1p8>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a_0p88>; + vdda-pll-supply = <&vreg_l3c_1p23>; + status = "okay"; +}; + &usb_1 { qcom,select-utmi-as-pipe-clk; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-curtana.dts b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-curtana.dts new file mode 100644 index 000000000000..12f517a8492c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-curtana.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2023, Joe Mason <buddyjojo06@outlook.com> + */ + +/dts-v1/; + +#include "sm7125-xiaomi-common.dtsi" + +/ { + model = "Xiaomi Redmi Note 9S"; + compatible = "xiaomi,curtana", "qcom,sm7125"; + + /* required for bootloader to select correct board */ + qcom,board-id = <0x20022 1>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index ade619805519..bc67e8c1fe4d 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -68,6 +68,14 @@ }; }; + /* Dummy regulator until PM6150L has LCDB VSP/VSN support */ + lcdb_dummy: regulator-lcdb-dummy { + compatible = "regulator-fixed"; + regulator-name = "lcdb_dummy"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + }; + reserved-memory { /* * The rmtfs memory region in downstream is 'dynamically allocated' @@ -116,7 +124,7 @@ }; &adsp { - firmware-name = "qcom/sm7225/fairphone4/adsp.mdt"; + firmware-name = "qcom/sm7225/fairphone4/adsp.mbn"; status = "okay"; }; @@ -361,7 +369,7 @@ }; &cdsp { - firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt"; + firmware-name = "qcom/sm7225/fairphone4/cdsp.mbn"; status = "okay"; }; @@ -373,6 +381,14 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sm7225/fairphone4/a615_zap.mbn"; +}; + &i2c0 { clock-frequency = <400000>; status = "okay"; @@ -400,12 +416,49 @@ &ipa { qcom,gsi-loader = "self"; memory-region = <&pil_ipa_fw_mem>; - firmware-name = "qcom/sm7225/fairphone4/ipa_fws.mdt"; + firmware-name = "qcom/sm7225/fairphone4/ipa_fws.mbn"; + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l22a>; + status = "okay"; + + panel@0 { + compatible = "djn,9a-3r063-1102b"; + reg = <0>; + + backlight = <&pm6150l_wled>; + reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>; + + vdd1-supply = <&vreg_l1e>; + vsn-supply = <&lcdb_dummy>; + vsp-supply = <&lcdb_dummy>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l18a>; status = "okay"; }; &mpss { - firmware-name = "qcom/sm7225/fairphone4/modem.mdt"; + firmware-name = "qcom/sm7225/fairphone4/modem.mbn"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 761a6757dc26..a35c0852b5a1 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -967,7 +967,7 @@ #address-cells = <1>; #size-cells = <1>; - gpu_speed_bin: gpu_speed_bin@133 { + gpu_speed_bin: gpu-speed-bin@133 { reg = <0x133 0x1>; bits = <5 3>; }; @@ -1843,8 +1843,22 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1858,14 +1872,16 @@ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&rpmhcc RPMH_CXO_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", "slave_q2a", - "tbu"; + "tbu", + "ref"; iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, <0x100 &apps_smmu 0x1d81 0x1>; @@ -1879,7 +1895,7 @@ phy-names = "pciephy"; perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; - enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_state>; @@ -1934,8 +1950,22 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1949,14 +1979,16 @@ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&rpmhcc RPMH_CXO_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", "slave_q2a", - "tbu"; + "tbu", + "ref"; assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; @@ -2063,10 +2095,12 @@ compatible = "qcom,sm8150-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_MEM_CLKREF_CLK>; clock-names = "ref", - "ref_aux"; - clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + "ref_aux", + "qref"; power-domains = <&gcc UFS_PHY_GDSC>; @@ -2198,6 +2232,7 @@ nvmem-cells = <&gpu_speed_bin>; nvmem-cell-names = "speed_bin"; + #cooling-cells = <2>; status = "disabled"; @@ -2428,7 +2463,7 @@ bias-disable; }; - qup_spi6_default: qup-spi6_default-state { + qup_spi6_default: qup-spi6-default-state { pins = "gpio4", "gpio5", "gpio6", "gpio7"; function = "qup6"; drive-strength = <6>; @@ -2442,7 +2477,7 @@ bias-disable; }; - qup_spi7_default: qup-spi7_default-state { + qup_spi7_default: qup-spi7-default-state { pins = "gpio98", "gpio99", "gpio100", "gpio101"; function = "qup7"; drive-strength = <6>; @@ -3573,12 +3608,16 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>, <&pdc 8 IRQ_TYPE_EDGE_BOTH>, - <&pdc 9 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -3645,12 +3684,16 @@ <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 7 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>, <&pdc 10 IRQ_TYPE_EDGE_BOTH>, - <&pdc 11 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; @@ -5067,7 +5110,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster0_crit: cluster0_crit { + cluster0_crit: cluster0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -5087,7 +5130,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster1_crit: cluster1_crit { + cluster1_crit: cluster1-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -5101,8 +5144,15 @@ thermal-sensors = <&tsens0 15>; + cooling-maps { + map0 { + trip = <&gpu_top_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu1_alert0: trip-point0 { + gpu_top_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -5281,8 +5331,15 @@ thermal-sensors = <&tsens1 11>; + cooling-maps { + map0 { + trip = <&gpu_bottom_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu2_alert0: trip-point0 { + gpu_bottom_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 760501c1301a..39bd8f0eba1e 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -975,7 +975,7 @@ #address-cells = <1>; #size-cells = <1>; - gpu_speed_bin: gpu_speed_bin@19b { + gpu_speed_bin: gpu-speed-bin@19b { reg = <0x19b 0x1>; bits = <5 3>; }; @@ -2152,8 +2152,14 @@ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2248,8 +2254,22 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2349,8 +2369,22 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>, <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>; - interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2506,10 +2540,12 @@ compatible = "qcom,sm8250-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; - clock-names = "ref", - "ref_aux"; clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_1X_CLKREF_EN>; + clock-names = "ref", + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -2888,6 +2924,7 @@ nvmem-cells = <&gpu_speed_bin>; nvmem-cell-names = "speed_bin"; + #cooling-cells = <2>; status = "disabled"; @@ -4128,14 +4165,16 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; wakeup-source; @@ -4197,14 +4236,16 @@ <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, <&pdc 13 IRQ_TYPE_EDGE_BOTH>, - <&pdc 12 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; wakeup-source; @@ -6757,7 +6798,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster0_crit: cluster0_crit { + cluster0_crit: cluster0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -6777,7 +6818,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster1_crit: cluster1_crit { + cluster1_crit: cluster1-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -6791,8 +6832,15 @@ thermal-sensors = <&tsens0 15>; + cooling-maps { + map0 { + trip = <&gpu_top_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu1_alert0: trip-point0 { + gpu_top_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -6926,8 +6974,15 @@ thermal-sensors = <&tsens1 8>; + cooling-maps { + map0 { + trip = <&gpu_bottom_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu2_alert0: trip-point0 { + gpu_bottom_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index e78c83a897c2..a5e7dbbd8c6c 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -1526,8 +1526,14 @@ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1611,8 +1617,22 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1726,10 +1746,12 @@ compatible = "qcom,sm8350-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; - clock-names = "ref", - "ref_aux"; clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_1_CLKREF_EN>; + clock-names = "ref", + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -1847,6 +1869,7 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; status = "disabled"; @@ -2312,14 +2335,16 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -2385,14 +2410,16 @@ <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, <&pdc 13 IRQ_TYPE_EDGE_BOTH>, - <&pdc 12 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; @@ -4165,7 +4192,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster0_crit: cluster0_crit { + cluster0_crit: cluster0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4185,7 +4212,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster1_crit: cluster1_crit { + cluster1_crit: cluster1-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4214,8 +4241,15 @@ thermal-sensors = <&tsens1 1>; + cooling-maps { + map0 { + trip = <&gpu_top_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu1_alert0: trip-point0 { + gpu_top_alert0: trip-point0 { temperature = <90000>; hysteresis = <1000>; type = "hot"; @@ -4229,8 +4263,15 @@ thermal-sensors = <&tsens1 2>; + cooling-maps { + map0 { + trip = <&gpu_bottom_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu2_alert0: trip-point0 { + gpu_bottom_alert0: trip-point0 { temperature = <90000>; hysteresis = <1000>; type = "hot"; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index a20d5d76af35..0786cff07b89 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -938,8 +938,8 @@ "TX DMIC3", "MIC BIAS1", "TX SWR_INPUT0", "ADC1_OUTPUT", "TX SWR_INPUT1", "ADC2_OUTPUT", - "TX SWR_INPUT2", "ADC3_OUTPUT", - "TX SWR_INPUT3", "ADC4_OUTPUT"; + "TX SWR_INPUT0", "ADC3_OUTPUT", + "TX SWR_INPUT1", "ADC4_OUTPUT"; wcd-playback-dai-link { link-name = "WCD Playback"; @@ -1147,7 +1147,7 @@ }; &vamacro { - pinctrl-0 = <&dmic01_default>, <&dmic02_default>; + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; pinctrl-names = "default"; vdd-micb-supply = <&vreg_s10b_1p8>; qcom,dmic-sample-rate = <600000>; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 01e4dfc4babd..b86be34a912b 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -1028,6 +1028,12 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart20_default>; interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1420,6 +1426,12 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; }; @@ -1772,8 +1784,22 @@ msi-map = <0x0 &gic_its 0x5981 0x1>, <0x100 &gic_its 0x5980 0x1>; msi-map-mask = <0xff00>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1881,8 +1907,22 @@ msi-map = <0x0 &gic_its 0x5a01 0x1>, <0x100 &gic_its 0x5a00 0x1>; msi-map-mask = <0xff00>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2038,6 +2078,7 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; status = "disabled"; @@ -3934,7 +3975,7 @@ }; }; - dmic02_default: dmic02-default-state { + dmic23_default: dmic23-default-state { clk-pins { pins = "gpio8"; function = "dmic2_clk"; @@ -4485,13 +4526,15 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -4890,6 +4933,13 @@ polling-delay = <0>; thermal-sensors = <&tsens0 14>; + cooling-maps { + map0 { + trip = <&gpu_top_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -4909,7 +4959,7 @@ type = "passive"; }; - gpu0_tj_cfg: tj-cfg { + gpu_top_alert0: trip-point0 { temperature = <95000>; hysteresis = <5000>; type = "passive"; @@ -4922,6 +4972,13 @@ polling-delay = <0>; thermal-sensors = <&tsens0 15>; + cooling-maps { + map0 { + trip = <&gpu_bottom_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -4941,7 +4998,7 @@ type = "passive"; }; - gpu1_tj_cfg: tj-cfg { + gpu_bottom_alert0: trip-point0 { temperature = <95000>; hysteresis = <5000>; type = "passive"; diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts new file mode 100644 index 000000000000..12d60a0ee095 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts @@ -0,0 +1,1306 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024 Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8550.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 5 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d_a.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8550 HDK"; + compatible = "qcom,sm8550-hdk", "qcom,sm8550"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart7; + serial1 = &uart14; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_out: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; + gpios = <&tlmm 159 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + + led-1 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + gpios = <&tlmm 160 GPIO_ACTIVE_HIGH>; + default-state = "off"; + panic-indicator; + }; + + led-2 { + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_ORANGE>; + gpios = <&tlmm 162 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; + + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; + }; + }; + + lt9611_1v2: regulator-lt9611-1v2 { + compatible = "regulator-fixed"; + + regulator-name = "LT9611_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + vin-supply = <&vph_pwr>; + gpio = <&tlmm 152 GPIO_ACTIVE_HIGH>; + + enable-active-high; + }; + + lt9611_3v3: regulator-lt9611-3v3 { + compatible = "regulator-fixed"; + + regulator-name = "LT9611_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vreg_bob_3v3>; + gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + enable-active-high; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; + + vreg_bob_3v3: regulator-vreg-bob-3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_BOB_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vph_pwr>; + }; + + sound { + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; + model = "SM8550-HDK"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC5", "MIC BIAS4", + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT1", "ADC4_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s4g_1p25>; + vdd-l12-supply = <&vreg_s6g_1p86>; + vdd-l15-supply = <&vreg_s6g_1p86>; + vdd-l17-supply = <&vreg_bob2>; + + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + qcom,pmic-id = "c"; + + vreg_l3c_0p9: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + /* ldo2 supplies SM8550 VDD_LPI_MX */ + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + + qcom,pmic-id = "e"; + + vreg_s4e_0p95: smps4 { + regulator-name = "vreg_s4e_0p95"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p08: smps5 { + regulator-name = "vreg_s5e_1p08"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + vdd-s4-supply = <&vph_pwr>; + + qcom,pmic-id = "f"; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p88: ldo3 { + regulator-name = "vreg_l3f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "g"; + + vreg_s1g_1p25: smps1 { + regulator-name = "vreg_s1g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p85: smps2 { + regulator-name = "vreg_s2g_0p85"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p8: smps3 { + regulator-name = "vreg_s3g_0p8"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p25: smps4 { + regulator-name = "vreg_s4g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p85: smps5 { + regulator-name = "vreg_s5g_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p86: smps6 { + regulator-name = "vreg_s6g_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + + vdd-l1-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6g_1p86>; + vdd-l6-supply = <&vreg_s6g_1p86>; + vdd-l7-supply = <&vreg_bob1>; + + qcom,pmic-id = "m"; + + vreg_l1m_1p056: ldo1 { + regulator-name = "vreg_l1m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_1p8: ldo6 { + regulator-name = "vreg_l6m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p9: ldo7 { + regulator-name = "vreg_l7m_2p9"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + + vdd-l1-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6g_1p86>; + vdd-l6-supply = <&vreg_bob1>; + vdd-l7-supply = <&vreg_bob1>; + + qcom,pmic-id = "n"; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p1: ldo2 { + regulator-name = "vreg_l2n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_2p8: ldo3 { + regulator-name = "vreg_l3n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_2p8: ldo4 { + regulator-name = "vreg_l4n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_1p8: ldo5 { + regulator-name = "vreg_l5n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_3p3: ldo6 { + regulator-name = "vreg_l6n_3p3"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_2p96: ldo7 { + regulator-name = "vreg_l7n_2p96"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + + interrupts-extended = <&tlmm 8 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <<9611_3v3>; + + pinctrl-0 = <<9611_irq_pin>, <<9611_rst_pin>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_connector_out>; + }; + }; + }; + }; +}; + +&i2c_hub_2 { + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + vcc-supply = <&vreg_bob1>; + + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; +}; + +&i2c_master_hub_0 { + status = "okay"; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sm8550/ipa_fws.mbn"; + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; + }; +}; + +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3e_1p2>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1e_0p88>; + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + remote-endpoint = <&usb_dp_qmpphy_dp_in>; + data-lanes = <0 1>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie1 { + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l3c_0p9>; + vdda-pll-supply = <&vreg_l3e_1p2>; + vdda-qref-supply = <&vreg_l1e_0p88>; + + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + +&pm8550_gpios { + sdc2_card_det_n: sdc2-card-det-state { + pins = "gpio12"; + function = "normal"; + input-enable; + output-disable; + bias-pull-up; + power-source = <1>; /* 1.8 V */ + }; + + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +/* The RGB signals are routed to 3 separate LEDs on the HDK8550 */ +&pm8550_pwm { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + default-state = "off"; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + default-state = "off"; + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8550/adsp.mbn", + "qcom/sm8550/adsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8550/cdsp.mbn", + "qcom/sm8550/cdsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8550/modem.mbn", + "qcom/sm8550/modem_dtb.mbn"; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + + bus-width = <4>; + no-sdio; + no-mmc; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&swr0 { + status = "okay"; + + /* WSA8845, Speaker North */ + north_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + + powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; + + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + }; + + /* WSA8845, Speaker South */ + south_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + + pinctrl-0 = <&spkr_2_sd_n_active>; + pinctrl-names = "default"; + + powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; + + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + + /* + * WCD9385 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) + * WCD9385 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) + * WCD9385 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) + * WCD9385 RX Port 4 (LO) <=> SWR1 Port 4 (LO) + * WCD9385 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) + */ + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + + /* + * WCD9385 TX Port 1 (ADC1,2) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9385 TX Port 2 (ADC3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9385 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) + * WCD9385 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) + */ + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + +&tlmm { + /* Reserved I/Os for NFC */ + gpio-reserved-ranges = <32 8>; + + bt_default: bt-default-state { + bt-en-pins { + pins = "gpio81"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sw-ctrl-pins { + pins = "gpio82"; + function = "gpio"; + bias-pull-down; + }; + }; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio8"; + function = "gpio"; + bias-disable; + }; + + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio7"; + function = "gpio"; + output-high; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio108"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&uart7 { + status = "okay"; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_s4e_0p95>; + vdddig-supply = <&vreg_s4e_0p95>; + vddrfa0p8-supply = <&vreg_s4e_0p95>; + vddrfa1p2-supply = <&vreg_s4g_1p25>; + vddrfa1p9-supply = <&vreg_s6g_1p86>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1g_1p2>; + vccq-max-microamp = <1200000>; + vdd-hba-supply = <&vreg_l3g_1p2>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1e_0p88>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3f_0p88>; + + orientation-switch; + + status = "okay"; +}; + +&usb_dp_qmpphy_dp_in { + remote-endpoint = <&mdss_dp0_out>; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_dp_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index c1135ad5fa69..3d4ad5aac70f 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -106,14 +106,21 @@ "SpkrRight IN", "WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", "VA DMIC0", "MIC BIAS1", "VA DMIC1", "MIC BIAS1", "VA DMIC2", "MIC BIAS3", "TX DMIC0", "MIC BIAS1", "TX DMIC1", "MIC BIAS2", "TX DMIC2", "MIC BIAS3", - "TX SWR_ADC1", "ADC2_OUTPUT"; + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT0", "ADC3_OUTPUT", + "TX SWR_INPUT1", "ADC4_OUTPUT"; wcd-playback-dai-link { link-name = "WCD Playback"; @@ -874,7 +881,7 @@ wcd_tx: codec@0,3 { compatible = "sdw20217010d00"; reg = <0 3>; - qcom,tx-port-mapping = <1 1 2 3>; + qcom,tx-port-mapping = <2 2 3 4>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index d401d63e5c4d..92f015017418 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -124,14 +124,21 @@ "SpkrRight IN", "WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", "VA DMIC0", "MIC BIAS1", "VA DMIC1", "MIC BIAS1", "VA DMIC2", "MIC BIAS3", "TX DMIC0", "MIC BIAS1", "TX DMIC1", "MIC BIAS2", "TX DMIC2", "MIC BIAS3", - "TX SWR_ADC1", "ADC2_OUTPUT"; + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT0", "ADC3_OUTPUT", + "TX SWR_INPUT1", "ADC4_OUTPUT"; wcd-playback-dai-link { link-name = "WCD Playback"; @@ -724,6 +731,10 @@ <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; }; +&gpi_dma1 { + status = "okay"; +}; + &gpu { status = "okay"; @@ -960,6 +971,30 @@ }; }; +&spi4 { + status = "okay"; + + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; + + avdd-supply = <&vreg_l14b_3p2>; + + spi-max-frequency = <1000000>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <2400>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_irq>, <&ts_reset>; + }; +}; + &swr1 { status = "okay"; @@ -978,7 +1013,7 @@ wcd_tx: codec@0,3 { compatible = "sdw20217010d00"; reg = <0 3>; - qcom,tx-port-mapping = <1 1 2 3>; + qcom,tx-port-mapping = <2 2 3 4>; }; }; @@ -1028,6 +1063,20 @@ bias-pull-down; }; + ts_irq: ts-irq-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset: ts-reset-state { + pins = "gpio24"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + wcd_default: wcd-reset-n-active-state { pins = "gpio108"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index ee1ba5a8c8fc..7474cddf7ad3 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -1713,9 +1713,22 @@ linux,pci-domain = <0>; num-lanes = <2>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1742,6 +1755,9 @@ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>; interconnect-names = "pcie-mem", "cpu-pcie"; + /* Entries are reversed due to the unusual ITS DeviceID encoding */ + msi-map = <0x0 &gic_its 0x1401 0x1>, + <0x100 &gic_its 0x1400 0x1>; iommu-map = <0x0 &apps_smmu 0x1400 0x1>, <0x100 &apps_smmu 0x1401 0x1>; @@ -1804,9 +1820,22 @@ linux,pci-domain = <1>; num-lanes = <2>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1838,6 +1867,9 @@ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>; interconnect-names = "pcie-mem", "cpu-pcie"; + /* Entries are reversed due to the unusual ITS DeviceID encoding */ + msi-map = <0x0 &gic_its 0x1481 0x1>, + <0x100 &gic_its 0x1480 0x1>; iommu-map = <0x0 &apps_smmu 0x1480 0x1>, <0x100 &apps_smmu 0x1481 0x1>; @@ -1907,9 +1939,12 @@ ufs_mem_phy: phy@1d80000 { compatible = "qcom,sm8550-qmp-ufs-phy"; reg = <0x0 0x01d80000 0x0 0x2000>; - clocks = <&tcsr TCSR_UFS_CLKREF_EN>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&tcsr TCSR_UFS_CLKREF_EN>; + clock-names = "ref", + "ref_aux", + "qref"; power-domains = <&gcc UFS_MEM_PHY_GDSC>; @@ -1940,6 +1975,7 @@ iommus = <&apps_smmu 0x60 0x0>; dma-coherent; + operating-points-v2 = <&ufs_opp_table>; interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; @@ -1960,18 +1996,49 @@ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; - freq-table-hz = - <75000000 300000000>, - <0 0>, - <0 0>, - <75000000 300000000>, - <100000000 403000000>, - <0 0>, - <0 0>, - <0 0>; qcom,ice = <&ice>; status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <75000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; ice: crypto@1d88000 { @@ -2012,6 +2079,7 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; status = "disabled"; @@ -2507,7 +2575,7 @@ }; }; - dmic02_default: dmic02-default-state { + dmic23_default: dmic23-default-state { clk-pins { pins = "gpio8"; function = "dmic2_clk"; @@ -3133,13 +3201,15 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; required-opps = <&rpmhpd_opp_nom>; @@ -4254,6 +4324,7 @@ reg = <3>; iommus = <&apps_smmu 0x1003 0x80>, <&apps_smmu 0x1063 0x0>; + dma-coherent; }; compute-cb@4 { @@ -4261,6 +4332,7 @@ reg = <4>; iommus = <&apps_smmu 0x1004 0x80>, <&apps_smmu 0x1064 0x0>; + dma-coherent; }; compute-cb@5 { @@ -4268,6 +4340,7 @@ reg = <5>; iommus = <&apps_smmu 0x1005 0x80>, <&apps_smmu 0x1065 0x0>; + dma-coherent; }; compute-cb@6 { @@ -4275,6 +4348,7 @@ reg = <6>; iommus = <&apps_smmu 0x1006 0x80>, <&apps_smmu 0x1066 0x0>; + dma-coherent; }; compute-cb@7 { @@ -4282,6 +4356,7 @@ reg = <7>; iommus = <&apps_smmu 0x1007 0x80>, <&apps_smmu 0x1067 0x0>; + dma-coherent; }; }; @@ -4388,6 +4463,7 @@ iommus = <&apps_smmu 0x1961 0x0>, <&apps_smmu 0x0c01 0x20>, <&apps_smmu 0x19c1 0x10>; + dma-coherent; }; compute-cb@2 { @@ -4396,6 +4472,7 @@ iommus = <&apps_smmu 0x1962 0x0>, <&apps_smmu 0x0c02 0x20>, <&apps_smmu 0x19c2 0x10>; + dma-coherent; }; compute-cb@3 { @@ -4404,6 +4481,7 @@ iommus = <&apps_smmu 0x1963 0x0>, <&apps_smmu 0x0c03 0x20>, <&apps_smmu 0x19c3 0x10>; + dma-coherent; }; compute-cb@4 { @@ -4412,6 +4490,7 @@ iommus = <&apps_smmu 0x1964 0x0>, <&apps_smmu 0x0c04 0x20>, <&apps_smmu 0x19c4 0x10>; + dma-coherent; }; compute-cb@5 { @@ -4420,6 +4499,7 @@ iommus = <&apps_smmu 0x1965 0x0>, <&apps_smmu 0x0c05 0x20>, <&apps_smmu 0x19c5 0x10>; + dma-coherent; }; compute-cb@6 { @@ -4428,6 +4508,7 @@ iommus = <&apps_smmu 0x1966 0x0>, <&apps_smmu 0x0c06 0x20>, <&apps_smmu 0x19c6 0x10>; + dma-coherent; }; compute-cb@7 { @@ -4436,6 +4517,7 @@ iommus = <&apps_smmu 0x1967 0x0>, <&apps_smmu 0x0c07 0x20>, <&apps_smmu 0x19c7 0x10>; + dma-coherent; }; compute-cb@8 { @@ -4444,6 +4526,7 @@ iommus = <&apps_smmu 0x1968 0x0>, <&apps_smmu 0x0c08 0x20>, <&apps_smmu 0x19c8 0x10>; + dma-coherent; }; /* note: secure cb9 in downstream */ @@ -5304,6 +5387,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 1>; + cooling-maps { + map0 { + trip = <&gpu0_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -5336,6 +5426,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 2>; + cooling-maps { + map0 { + trip = <&gpu1_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -5368,6 +5465,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 3>; + cooling-maps { + map0 { + trip = <&gpu2_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -5400,6 +5504,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 4>; + cooling-maps { + map0 { + trip = <&gpu3_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -5432,6 +5543,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 5>; + cooling-maps { + map0 { + trip = <&gpu4_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -5464,6 +5582,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 6>; + cooling-maps { + map0 { + trip = <&gpu5_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -5496,6 +5621,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 7>; + cooling-maps { + map0 { + trip = <&gpu6_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -5528,6 +5660,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 8>; + cooling-maps { + map0 { + trip = <&gpu7_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts index 9d916edb1c73..0bf1b048a243 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts @@ -66,6 +66,29 @@ }; }; + sound { + compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard"; + model = "SM8650-MTP"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT"; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -428,6 +451,138 @@ RPMH_REGULATOR_MODE_HPM>; }; }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vdd-l1-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6c_1p8>; + vdd-l6-supply = <&vreg_bob1>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1m_1p1: ldo1 { + regulator-name = "vreg_l1m_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_2p8: ldo6 { + regulator-name = "vreg_l6m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p96: ldo7 { + regulator-name = "vreg_l7m_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vdd-l1-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-l4-supply = <&vreg_s6c_1p8>; + vdd-l5-supply = <&vreg_bob2>; + vdd-l6-supply = <&vreg_bob2>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p056: ldo2 { + regulator-name = "vreg_l2n_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_1p8: ldo3 { + regulator-name = "vreg_l3n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_1p8: ldo4 { + regulator-name = "vreg_l4n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_2p8: ldo5 { + regulator-name = "vreg_l5n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_2p8: ldo6 { + regulator-name = "vreg_l6n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_3p3: ldo7 { + regulator-name = "vreg_l7n_3p3"; + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; }; &dispcc { diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts index 592a67a47c78..21b0b0583f40 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -77,9 +77,83 @@ reg = <1>; pmic_glink_ss_in: endpoint { - remote-endpoint = <&usb_1_dwc3_ss>; + remote-endpoint = <&redriver_ss_out>; }; }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&wcd_usbss_sbu_mux>; + }; + }; + }; + }; + }; + + sound { + compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard"; + model = "SM8650-QRD"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT2", "ADC3_OUTPUT", + "TX SWR_INPUT3", "ADC4_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; }; }; }; @@ -94,6 +168,41 @@ regulator-always-on; regulator-boot-on; }; + + wcd939x: audio-codec { + compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + + mode-switch; + orientation-switch; + + port { + wcd_codec_headset_in: endpoint { + remote-endpoint = <&wcd_usbss_headset_out>; + }; + }; + }; }; &apps_rsc { @@ -436,6 +545,138 @@ RPMH_REGULATOR_MODE_HPM>; }; }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vdd-l1-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6c_1p8>; + vdd-l6-supply = <&vreg_bob1>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1m_1p1: ldo1 { + regulator-name = "vreg_l1m_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_2p8: ldo6 { + regulator-name = "vreg_l6m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p96: ldo7 { + regulator-name = "vreg_l7m_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vdd-l1-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-l4-supply = <&vreg_s6c_1p8>; + vdd-l5-supply = <&vreg_bob2>; + vdd-l6-supply = <&vreg_bob2>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p056: ldo2 { + regulator-name = "vreg_l2n_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_1p8: ldo3 { + regulator-name = "vreg_l3n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_1p8: ldo4 { + regulator-name = "vreg_l4n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_2p8: ldo5 { + regulator-name = "vreg_l5n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_2p8: ldo6 { + regulator-name = "vreg_l6n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_3p3: ldo7 { + regulator-name = "vreg_l7n_3p3"; + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; }; &dispcc { @@ -446,6 +687,78 @@ status = "okay"; }; +&i2c3 { + status = "okay"; + + wcd_usbss: typec-mux@e { + compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss"; + reg = <0xe>; + + vdd-supply = <&vreg_l15b_1p8>; + reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>; + + mode-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + wcd_usbss_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + + port@1 { + reg = <1>; + + wcd_usbss_headset_out: endpoint { + remote-endpoint = <&wcd_codec_headset_in>; + }; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + typec-mux@1c { + compatible = "onnn,nb7vpq904m"; + reg = <0x1c>; + + vcc-supply = <&vreg_l15b_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + redriver_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + redriver_ss_in: endpoint { + data-lanes = <3 2 1 0>; + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + }; + }; +}; + &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; @@ -453,6 +766,16 @@ status = "okay"; }; +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + &mdss { status = "okay"; }; @@ -495,6 +818,15 @@ status = "okay"; }; +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_dp_qmpphy_dp_in>; +}; + &mdss_mdp { status = "okay"; }; @@ -600,6 +932,11 @@ status = "okay"; }; +&qup_i2c3_data_clk { + /* Use internal I2C pull-up */ + bias-pull-up = <2200>; +}; + &qupv3_id_0 { status = "okay"; }; @@ -657,6 +994,74 @@ }; }; +&swr0 { + status = "okay"; + + /* WSA8845, Speaker Left */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + }; + + /* WSA8845, Speaker Right */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-0 = <&spkr_2_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9395 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + + /* + * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) + * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) + * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) + * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) + * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) + * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) + */ + qcom,rx-port-mapping = <1 2 3 4 5 9>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9395 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + + /* + * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) + * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) + */ + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + &tlmm { /* Reserved I/Os for NFC */ gpio-reserved-ranges = <32 8>; @@ -704,6 +1109,14 @@ bias-pull-down; }; + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio77"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + ts_irq: ts-irq-state { pins = "gpio161"; function = "gpio"; @@ -718,6 +1131,14 @@ drive-strength = <8>; bias-pull-up; }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart14 { @@ -787,7 +1208,7 @@ }; &usb_1_dwc3_ss { - remote-endpoint = <&pmic_glink_ss_in>; + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; }; &usb_1_hsphy { @@ -803,9 +1224,23 @@ vdda-phy-supply = <&vreg_l3i_1p2>; vdda-pll-supply = <&vreg_l3g_0p91>; + orientation-switch; + status = "okay"; }; +&usb_dp_qmpphy_dp_in { + remote-endpoint = <&mdss_dp0_out>; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&redriver_ss_in>; +}; + +&usb_dp_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; +}; + &xo_board { clock-frequency = <76800000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index 2df77123a8c7..12ba839f215e 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -525,6 +525,11 @@ no-map; }; + qlink_logging_mem: qlink-logging@84800000 { + reg = <0 0x84800000 0 0x200000>; + no-map; + }; + mpss_dsm_mem: mpss-dsm@86b00000 { reg = <0 0x86b00000 0 0x4900000>; no-map; @@ -1228,7 +1233,7 @@ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; clock-names = "se"; - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; @@ -1250,7 +1255,7 @@ clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; clock-names = "se"; - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; @@ -2213,8 +2218,22 @@ <0 0x60100000 0 0x100000>; reg-names = "parf", "dbi", "elbi", "atu", "config"; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; clocks = <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, @@ -2255,6 +2274,11 @@ interrupt-map-mask = <0 0 0 0x7>; #interrupt-cells = <1>; + /* Entries are reversed due to the unusual ITS DeviceID encoding */ + msi-map = <0x0 &gic_its 0x1401 0x1>, + <0x100 &gic_its 0x1400 0x1>; + msi-map-mask = <0xff00>; + linux,pci-domain = <0>; num-lanes = <2>; bus-range = <0 0xff>; @@ -2317,8 +2341,22 @@ "atu", "config"; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; clocks = <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, @@ -2364,6 +2402,11 @@ interrupt-map-mask = <0 0 0 0x7>; #interrupt-cells = <1>; + /* Entries are reversed due to the unusual ITS DeviceID encoding */ + msi-map = <0x0 &gic_its 0x1481 0x1>, + <0x100 &gic_its 0x1480 0x1>; + msi-map-mask = <0xff00>; + linux,pci-domain = <1>; num-lanes = <2>; bus-range = <0 0xff>; @@ -2448,10 +2491,12 @@ compatible = "qcom,sm8650-qmp-ufs-phy"; reg = <0 0x01d80000 0 0x2000>; - clocks = <&tcsr TCSR_UFS_CLKREF_EN>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&tcsr TCSR_UFS_CLKREF_EN>; clock-names = "ref", - "ref_aux"; + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -2627,7 +2672,8 @@ "mss"; memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, - <&mpss_dsm_mem>, <&mpss_dsm_mem_2>; + <&mpss_dsm_mem>, <&mpss_dsm_mem_2>, + <&qlink_logging_mem>; qcom,qmp = <&aoss_qmp>; @@ -2919,7 +2965,7 @@ }; }; - dmic02_default: dmic02-default-state { + dmic23_default: dmic23-default-state { clk-pins { pins = "gpio8"; function = "dmic2_clk"; @@ -4808,6 +4854,7 @@ iommus = <&apps_smmu 0x1003 0x80>, <&apps_smmu 0x1043 0x20>; + dma-coherent; }; compute-cb@4 { @@ -4816,6 +4863,7 @@ iommus = <&apps_smmu 0x1004 0x80>, <&apps_smmu 0x1044 0x20>; + dma-coherent; }; compute-cb@5 { @@ -4824,6 +4872,7 @@ iommus = <&apps_smmu 0x1005 0x80>, <&apps_smmu 0x1045 0x20>; + dma-coherent; }; compute-cb@6 { @@ -4832,6 +4881,7 @@ iommus = <&apps_smmu 0x1006 0x80>, <&apps_smmu 0x1046 0x20>; + dma-coherent; }; compute-cb@7 { @@ -4841,6 +4891,7 @@ iommus = <&apps_smmu 0x1007 0x40>, <&apps_smmu 0x1067 0x0>, <&apps_smmu 0x1087 0x0>; + dma-coherent; }; }; @@ -4961,6 +5012,7 @@ iommus = <&apps_smmu 0x1961 0x0>, <&apps_smmu 0x0c01 0x20>, <&apps_smmu 0x19c1 0x0>; + dma-coherent; }; compute-cb@2 { @@ -4970,6 +5022,7 @@ iommus = <&apps_smmu 0x1962 0x0>, <&apps_smmu 0x0c02 0x20>, <&apps_smmu 0x19c2 0x0>; + dma-coherent; }; compute-cb@3 { @@ -4979,6 +5032,7 @@ iommus = <&apps_smmu 0x1963 0x0>, <&apps_smmu 0x0c03 0x20>, <&apps_smmu 0x19c3 0x0>; + dma-coherent; }; compute-cb@4 { @@ -4988,6 +5042,7 @@ iommus = <&apps_smmu 0x1964 0x0>, <&apps_smmu 0x0c04 0x20>, <&apps_smmu 0x19c4 0x0>; + dma-coherent; }; compute-cb@5 { @@ -4997,6 +5052,7 @@ iommus = <&apps_smmu 0x1965 0x0>, <&apps_smmu 0x0c05 0x20>, <&apps_smmu 0x19c5 0x0>; + dma-coherent; }; compute-cb@6 { @@ -5006,6 +5062,7 @@ iommus = <&apps_smmu 0x1966 0x0>, <&apps_smmu 0x0c06 0x20>, <&apps_smmu 0x19c6 0x0>; + dma-coherent; }; compute-cb@7 { @@ -5015,6 +5072,7 @@ iommus = <&apps_smmu 0x1967 0x0>, <&apps_smmu 0x0c07 0x20>, <&apps_smmu 0x19c7 0x0>; + dma-coherent; }; compute-cb@8 { @@ -5024,6 +5082,7 @@ iommus = <&apps_smmu 0x1968 0x0>, <&apps_smmu 0x0c08 0x20>, <&apps_smmu 0x19c8 0x0>; + dma-coherent; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index 7532d8eca2de..6a0a54532e5f 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -18,10 +18,124 @@ serial0 = &uart21; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-CRD"; + audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT", + "TwitterLeft IN", "WSA WSA_SPK2 OUT", + "WooferRight IN", "WSA2 WSA_SPK2 OUT", + "TwitterRight IN", "WSA2 WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "VA DMIC0", "VA MIC BIAS3", + "VA DMIC1", "VA MIC BIAS3", + "VA DMIC2", "VA MIC BIAS1", + "VA DMIC3", "VA MIC BIAS1", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_woofer>, <&left_tweeter>, + <&swr0 0>, <&lpass_wsamacro 0>, + <&right_woofer>, <&right_tweeter>, + <&swr3 0>, <&lpass_wsa2macro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -401,10 +515,251 @@ }; }; +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ts0_default>; + pinctrl-names = "default"; + }; +}; + +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_23_sd_n_active: spkr-23-sd-n-active-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + data-lanes = <0 1 2 3>; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss_dp3_out: endpoint { + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + &qupv3_2 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/adsp.mbn", + "qcom/x1e80100/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/cdsp.mbn", + "qcom/x1e80100/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&swr0 { + status = "okay"; + + /* WSA8845, Left Woofer */ + left_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-0 = <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + }; + + /* WSA8845, Left Tweeter */ + left_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + /* pinctrl in left_woofer node because of sharing the GPIO*/ + powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TwitterLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + +&swr3 { + status = "okay"; + + /* WSA8845, Right Woofer */ + right_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-0 = <&spkr_23_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + }; + + /* WSA8845, Right Tweeter */ + right_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + /* pinctrl in right_woofer node because of sharing the GPIO*/ + powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TwitterRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + }; +}; + &tlmm { gpio-reserved-ranges = <34 2>, /* Unused */ <44 4>, /* SPI (TPM) */ @@ -416,9 +771,104 @@ drive-strength = <16>; bias-disable; }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-disable; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-disable; + }; + + ts0_default: ts0-default-state { + int-n-pins { + pins = "gpio51"; + function = "gpio"; + bias-disable; + }; + + reset-n-pins { + pins = "gpio48"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart21 { compatible = "qcom,geni-debug-uart"; status = "okay"; }; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; + usb-role-switch; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; + usb-role-switch; +}; + +&usb_1_ss2_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss2_qmpphy { + status = "okay"; +}; + +&usb_1_ss2 { + status = "okay"; +}; + +&usb_1_ss2_dwc3 { + dr_mode = "host"; + usb-role-switch; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index a37ad9475c90..e76d29053d79 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "x1e80100.dtsi" @@ -31,6 +32,23 @@ regulator-always-on; regulator-boot-on; }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-always-on; + regulator-boot-on; + }; }; &apps_rsc { @@ -243,7 +261,7 @@ qcom,pmic-id = "e"; vdd-l2-supply = <&vreg_s1f_0p7>; - vdd-l3-supply = <&vph_pwr>; + vdd-l3-supply = <&vreg_s5j_1p2>; vreg_l2e_0p8: ldo2 { regulator-name = "vreg_l2e_0p8"; @@ -349,7 +367,7 @@ qcom,pmic-id = "j"; vdd-l1-supply = <&vreg_s1f_0p7>; - vdd-l2-supply = <&vph_pwr>; + vdd-l2-supply = <&vreg_s5j_1p2>; vdd-l3-supply = <&vreg_s1f_0p7>; vdd-s5-supply = <&vph_pwr>; @@ -383,17 +401,170 @@ }; }; +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + data-lanes = <0 1 2 3>; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss_dp3_out: endpoint { + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + &qupv3_2 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/adsp.mbn", + "qcom/x1e80100/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/cdsp.mbn", + "qcom/x1e80100/cdsp_dtb.mbn"; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <33 3>, /* Unused */ <44 4>, /* SPI (TPM) */ <238 1>; /* UFS Reset */ + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; }; &uart21 { compatible = "qcom,geni-debug-uart"; status = "okay"; }; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; + usb-role-switch; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; + usb-role-switch; +}; + +&usb_1_ss2_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss2_qmpphy { + status = "okay"; +}; + +&usb_1_ss2 { + status = "okay"; +}; + +&usb_1_ss2_dwc3 { + dr_mode = "host"; + usb-role-switch; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index 6f75fc342ceb..8e517f76189e 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -4,14 +4,20 @@ */ #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,x1e80100-dispcc.h> #include <dt-bindings/clock/qcom,x1e80100-gcc.h> +#include <dt-bindings/clock/qcom,x1e80100-tcsr.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom,rpmhpd.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> / { interrupt-parent = <&intc>; @@ -395,16 +401,24 @@ CLUSTER_PD0: power-domain-cpu-cluster0 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>; + power-domains = <&SYSTEM_PD>; }; CLUSTER_PD1: power-domain-cpu-cluster1 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>; + power-domains = <&SYSTEM_PD>; }; CLUSTER_PD2: power-domain-cpu-cluster2 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>; + power-domains = <&SYSTEM_PD>; + }; + + SYSTEM_PD: power-domain-system { + #power-domain-cells = <0>; + /* TODO: system-wide idle states */ }; }; @@ -662,6 +676,58 @@ }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <443>, <429>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { compatible = "simple-bus"; @@ -677,13 +743,13 @@ clocks = <&bi_tcxo_div2>, <&sleep_clk>, <0>, + <&pcie4_phy>, <0>, + <&pcie6a_phy>, <0>, - <0>, - <0>, - <0>, - <0>, - <0>; + <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; power-domains = <&rpmhpd RPMHPD_CX>; #clock-cells = <1>; @@ -691,6 +757,17 @@ #power-domain-cells = <1>; }; + ipcc: mailbox@408000 { + compatible = "qcom,x1e80100-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + + #mbox-cells = <2>; + }; + gpi_dma2: dma-controller@800000 { compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x00800000 0 0x60000>; @@ -1139,7 +1216,7 @@ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; clock-names = "se"; - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; @@ -2428,6 +2505,126 @@ }; }; + usb_1_ss0_hsphy: phy@fd3000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x00fd3000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + status = "disabled"; + }; + + usb_1_ss0_qmpphy: phy@fd5000 { + compatible = "qcom,x1e80100-qmp-usb3-dp-phy"; + reg = <0 0x00fd5000 0 0x4000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + power-domains = <&gcc GCC_USB_0_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB4_0_DP0_PHY_PRIM_BCR>; + reset-names = "phy", + "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + + usb_1_ss1_hsphy: phy@fd9000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x00fd9000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + status = "disabled"; + }; + + usb_1_ss1_qmpphy: phy@fda000 { + compatible = "qcom,x1e80100-qmp-usb3-dp-phy"; + reg = <0 0x00fda000 0 0x4000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + power-domains = <&gcc GCC_USB_1_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB4_1_DP0_PHY_SEC_BCR>; + reset-names = "phy", + "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + + usb_1_ss2_hsphy: phy@fde000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x00fde000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_TERT_BCR>; + + status = "disabled"; + }; + + usb_1_ss2_qmpphy: phy@fdf000 { + compatible = "qcom,x1e80100-qmp-usb3-dp-phy"; + reg = <0 0x00fdf000 0 0x4000>; + + clocks = <&gcc GCC_USB3_TERT_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_TERT_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_TERT_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + power-domains = <&gcc GCC_USB_2_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_TERT_BCR>, + <&gcc GCC_USB4_2_DP0_PHY_TERT_BCR>; + reset-names = "phy", + "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + cnoc_main: interconnect@1500000 { compatible = "qcom,x1e80100-cnoc-main"; reg = <0 0x1500000 0 0x14400>; @@ -2536,12 +2733,258 @@ #interconnect-cells = <2>; }; + pcie6a: pci@1bf8000 { + device_type = "pci"; + compatible = "qcom,pcie-x1e80100"; + reg = <0 0x01bf8000 0 0x3000>, + <0 0x70000000 0 0xf1d>, + <0 0x70000f20 0 0xa8>, + <0 0x70001000 0 0x1000>, + <0 0x70100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>, + <0x02000000 0 0x70300000 0 0x70300000 0 0x3d00000>; + bus-range = <0 0xff>; + + dma-coherent; + + linux,pci-domain = <7>; + num-lanes = <2>; + + interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 843 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 844 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 845 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 772 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_6A_AUX_CLK>, + <&gcc GCC_PCIE_6A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_6A_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_6A_SLV_AXI_CLK>, + <&gcc GCC_PCIE_6A_SLV_Q2A_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_SOUTH_AHB_CLK>, + <&gcc GCC_CNOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr", + "cnoc_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_6A_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_south_anoc MASTER_PCIE_6A QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc_main SLAVE_PCIE_6A QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + resets = <&gcc GCC_PCIE_6A_BCR>, + <&gcc GCC_PCIE_6A_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_6A_GDSC>; + + phys = <&pcie6a_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie6a_phy: phy@1bfc000 { + compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy"; + reg = <0 0x01bfc000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>, + <&gcc GCC_PCIE_6A_CFG_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_6A_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + resets = <&gcc GCC_PCIE_6A_PHY_BCR>, + <&gcc GCC_PCIE_6A_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie6a_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie4: pci@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-x1e80100"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x7c000000 0 0xf1d>, + <0 0x7c000f40 0 0xa8>, + <0 0x7c001000 0 0x1000>, + <0 0x7c100000 0 0x100000>, + <0 0x01c0b000 0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0 0x00000000 0 0x7c200000 0 0x100000>, + <0x02000000 0 0x7c300000 0 0x7c300000 0 0x3d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <5>; + num-lanes = <2>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&gcc GCC_PCIE_4_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>, + <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr", + "cnoc_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_south_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + resets = <&gcc GCC_PCIE_4_BCR>, + <&gcc GCC_PCIE_4_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_4_GDSC>; + + phys = <&pcie4_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie4_phy: phy@1c0e000 { + compatible = "qcom,x1e80100-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_4_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + resets = <&gcc GCC_PCIE_4_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_4_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie4_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0 0x01f40000 0 0x20000>; #hwlock-cells = <1>; }; + tcsr: clock-controller@1fc0000 { + compatible = "qcom,x1e80100-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + gem_noc: interconnect@26400000 { compatible = "qcom,x1e80100-gem-noc"; reg = <0 0x26400000 0 0x311200>; @@ -2560,6 +3003,331 @@ #interconnect-cells = <2>; }; + lpass_wsa2macro: codec@6aa0000 { + compatible = "qcom,x1e80100-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06aa0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "wsa2-mclk"; + #sound-dai-cells = <1>; + sound-name-prefix = "WSA2"; + }; + + swr3: soundwire@6ab0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ab0000 0 0x10000>; + clocks = <&lpass_wsa2macro>; + clock-names = "iface"; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + label = "WSA2"; + + pinctrl-0 = <&wsa2_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0xc8 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_rxmacro: codec@6ac0000 { + compatible = "qcom,x1e80100-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro"; + reg = <0 0x06ac0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + swr1: soundwire@6ad0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ad0000 0 0x10000>; + clocks = <&lpass_rxmacro>; + clock-names = "iface"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + label = "RX"; + + pinctrl-0 = <&rx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <1>; + qcom,dout-ports = <11>; + + qcom,ports-sinterval = /bits/ 16 <0x03 0x1f 0x1f 0x07 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0x0f 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_txmacro: codec@6ae0000 { + compatible = "qcom,x1e80100-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro"; + reg = <0 0x06ae0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + lpass_wsamacro: codec@6b00000 { + compatible = "qcom,x1e80100-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06b00000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + sound-name-prefix = "WSA"; + }; + + swr0: soundwire@6b10000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06b10000 0 0x10000>; + clocks = <&lpass_wsamacro>; + clock-names = "iface"; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + label = "WSA"; + + pinctrl-0 = <&wsa_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0xc8 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + swr2: soundwire@6d30000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06d30000 0 0x10000>; + clocks = <&lpass_txmacro>; + clock-names = "iface"; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; + label = "TX"; + + pinctrl-0 = <&tx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <1>; + + qcom,ports-sinterval-low = /bits/ 8 <0x00 0x01 0x03 0x03 0x00>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x01 0x02 0x00 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0x00 0x00 0x01 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_vamacro: codec@6d44000 { + compatible = "qcom,x1e80100-lpass-va-macro", "qcom,sm8550-lpass-va-macro"; + reg = <0 0x06d44000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", + "macro", + "dcodec"; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + + lpass_tlmm: pinctrl@6e80000 { + compatible = "qcom,x1e80100-lpass-lpi-pinctrl", "qcom,sm8550-lpass-lpi-pinctrl"; + reg = <0 0x06e80000 0 0x20000>, + <0 0x07250000 0 0x10000>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + tx_swr_active: tx-swr-active-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_active: rx-swr-active-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic23_default: dmic23-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + + wsa_swr_active: wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + wsa2_swr_active: wsa2-swr-active-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + }; + lpass_ag_noc: interconnect@7e40000 { compatible = "qcom,x1e80100-lpass-ag-noc"; reg = <0 0x7e40000 0 0xE080>; @@ -2587,6 +3355,849 @@ #interconnect-cells = <2>; }; + usb_2_hsphy: phy@88e0000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x088e0000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_USB20_HS_BCR>; + + status = "disabled"; + }; + + usb_1_ss2: usb@a0f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a0f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_TERT_AXI_CLK>, + <&gcc GCC_USB30_TERT_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_TERT_AXI_CLK>, + <&gcc GCC_USB30_TERT_SLEEP_CLK>, + <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_TERT_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 58 IRQ_TYPE_EDGE_BOTH>, + <&pdc 57 IRQ_TYPE_EDGE_BOTH>, + <&pdc 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_TERT_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_TERT_BCR>; + + interconnects = <&usb_south_anoc MASTER_USB3_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_USB3_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "usb-ddr", + "apps-usb"; + + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_ss2_dwc3: usb@a000000 { + compatible = "snps,dwc3"; + reg = <0 0x0a000000 0 0xcd00>; + + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&apps_smmu 0x14a0 0x0>; + + phys = <&usb_1_ss2_hsphy>, + <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + + dma-coherent; + + port { + usb_1_ss2_role_switch: endpoint { + }; + }; + }; + }; + + usb_2: usb@a2f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a2f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 50 IRQ_TYPE_EDGE_BOTH>, + <&pdc 49 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + + power-domains = <&gcc GCC_USB20_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB20_PRIM_BCR>; + + interconnects = <&usb_north_anoc MASTER_USB2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "usb-ddr", + "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_2_dwc3: usb@a200000 { + compatible = "snps,dwc3"; + reg = <0 0x0a200000 0 0xcd00>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x14e0 0x0>; + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + + port { + usb_2_role_switch: endpoint { + }; + }; + }; + }; + + usb_1_ss0: usb@a6f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_NORTH_AHB_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 61 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_ss0_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&apps_smmu 0x1420 0x0>; + + phys = <&usb_1_ss0_hsphy>, + <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + + dma-coherent; + + port { + usb_1_ss0_role_switch: endpoint { + }; + }; + }; + }; + + usb_1_ss1: usb@a8f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 60 IRQ_TYPE_EDGE_BOTH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>, + <&pdc 47 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&usb_south_anoc MASTER_USB3_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_USB3_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "usb-ddr", + "apps-usb"; + + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_ss1_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&apps_smmu 0x1460 0x0>; + + phys = <&usb_1_ss1_hsphy>, + <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + + dma-coherent; + + port { + usb_1_ss1_role_switch: endpoint { + }; + }; + }; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,x1e80100-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>, + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,x1e80100-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", + "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + + mdss_intf4_out: endpoint { + remote-endpoint = <&mdss_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + + mdss_intf5_out: endpoint { + remote-endpoint = <&mdss_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + + mdss_intf6_out: endpoint { + remote-endpoint = <&mdss_dp2_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-575000000 { + opp-hz = /bits/ 64 <575000000>; + required-opps = <&rpmhpd_opp_nom_l1>; + }; + }; + }; + + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + + interrupts-extended = <&mdss 12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp0_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&mdss_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + }; + }; + }; + + mdss_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp1: displayport-controller@ae98000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0xae98000 0 0x200>, + <0 0xae98200 0 0x200>, + <0 0xae98400 0 0x600>, + <0 0xae99000 0 0x400>, + <0 0xae99400 0 0x400>; + + interrupts-extended = <&mdss 13>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp1_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp1_in: endpoint { + remote-endpoint = <&mdss_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp1_out: endpoint { + }; + }; + }; + + mdss_dp1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp2: displayport-controller@ae9a000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0xae9a000 0 0x200>, + <0 0xae9a200 0 0x200>, + <0 0xae9a400 0 0x600>, + <0 0xae9b000 0 0x400>, + <0 0xae9b400 0 0x400>; + + interrupts-extended = <&mdss 14>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss_dp2_phy 0>, + <&mdss_dp2_phy 1>; + + operating-points-v2 = <&mdss_dp2_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dp2_phy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp2_in: endpoint { + remote-endpoint = <&mdss_intf6_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss_dp2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp3: displayport-controller@aea0000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0xaea0000 0 0x200>, + <0 0xaea0200 0 0x200>, + <0 0xaea0400 0 0x600>, + <0 0xaea1000 0 0x400>, + <0 0xaea1400 0 0x400>; + + interrupts-extended = <&mdss 15>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss_dp3_phy 0>, + <&mdss_dp3_phy 1>; + + operating-points-v2 = <&mdss_dp3_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dp3_phy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp3_in: endpoint { + remote-endpoint = <&mdss_intf5_out>; + + link-frequencies = /bits/ 64 <8100000000>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss_dp3_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + }; + + mdss_dp2_phy: phy@aec2a00 { + compatible = "qcom,x1e80100-dp-phy"; + reg = <0 0x0aec2a00 0 0x19c>, + <0 0x0aec2200 0 0xec>, + <0 0x0aec2600 0 0xec>, + <0 0x0aec2000 0 0x1c8>; + + clocks = <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", + "cfg_ahb"; + + power-domains = <&rpmhpd RPMHPD_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dp3_phy: phy@aec5a00 { + compatible = "qcom,x1e80100-dp-phy"; + reg = <0 0x0aec5a00 0 0x19c>, + <0 0x0aec5200 0 0xec>, + <0 0x0aec5600 0 0xec>, + <0 0x0aec5000 0 0x1c8>; + + clocks = <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", + "cfg_ahb"; + + power-domains = <&rpmhpd RPMHPD_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,x1e80100-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <0>, /* dsi0 */ + <0>, + <0>, /* dsi1 */ + <0>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp0 */ + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp1 */ + <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&mdss_dp2_phy 0>, /* dp2 */ + <&mdss_dp2_phy 1>, + <&mdss_dp3_phy 0>, /* dp3 */ + <&mdss_dp3_phy 1>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,x1e80100-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; @@ -2599,6 +4210,18 @@ interrupt-controller; }; + aoss_qmp: power-management@c300000 { + compatible = "qcom,x1e80100-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + tlmm: pinctrl@f100000 { compatible = "qcom,x1e80100-tlmm"; reg = <0 0x0f100000 0 0xf00000>; @@ -3170,7 +4793,7 @@ /* TX, RX */ pins = "gpio86", "gpio87"; function = "qup2_se5"; - drive-strength= <2>; + drive-strength = <2>; bias-disable; }; }; @@ -3315,7 +4938,6 @@ <0 0x17510000 0 0x10000>, <0 0x17520000 0 0x10000>; reg-names = "drv-0", "drv-1", "drv-2"; - qcom,drv-count = <3>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, @@ -3326,6 +4948,7 @@ <WAKE_TCS 2>, <CONTROL_TCS 0>; label = "apps_rsc"; + power-domains = <&SYSTEM_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; @@ -3514,6 +5137,144 @@ "llcc_broadcast_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,x1e80100-adsp-pas"; + reg = <0 0x30000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + memory-region = <&adspslpi_mem>, + <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1001 0x80>, + <&apps_smmu 0x1061 0x0>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,x1e80100-cdsp-pas"; + reg = <0 0x32300000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP>; + power-domain-names = "cx", + "mxc", + "nsp"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + memory-region = <&cdsp_mem>, + <&q6_cdsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + }; + }; }; timer { diff --git a/include/dt-bindings/clock/qcom,gcc-msm8953.h b/include/dt-bindings/clock/qcom,gcc-msm8953.h index 783162da6148..13b4a62877e5 100644 --- a/include/dt-bindings/clock/qcom,gcc-msm8953.h +++ b/include/dt-bindings/clock/qcom,gcc-msm8953.h @@ -218,6 +218,10 @@ #define GCC_USB3PHY_PHY_BCR 3 #define GCC_USB3_PHY_BCR 4 #define GCC_USB_30_BCR 5 +#define GCC_MDSS_BCR 6 +#define GCC_CRYPTO_BCR 7 +#define GCC_SDCC1_BCR 8 +#define GCC_SDCC2_BCR 9 /* GDSCs */ #define CPP_GDSC 0 diff --git a/include/dt-bindings/clock/qcom,gcc-sc8180x.h b/include/dt-bindings/clock/qcom,gcc-sc8180x.h index e893415ae13d..90c6e021a035 100644 --- a/include/dt-bindings/clock/qcom,gcc-sc8180x.h +++ b/include/dt-bindings/clock/qcom,gcc-sc8180x.h @@ -246,6 +246,8 @@ #define GCC_PCIE_3_CLKREF_CLK 236 #define GCC_USB3_PRIM_CLKREF_CLK 237 #define GCC_USB3_SEC_CLKREF_CLK 238 +#define GCC_UFS_MEM_CLKREF_EN 239 +#define GCC_UFS_CARD_CLKREF_EN 240 #define GCC_EMAC_BCR 0 #define GCC_GPU_BCR 1 diff --git a/include/dt-bindings/clock/qcom,x1e80100-camcc.h b/include/dt-bindings/clock/qcom,x1e80100-camcc.h new file mode 100644 index 000000000000..d72fdfb06a7c --- /dev/null +++ b/include/dt-bindings/clock/qcom,x1e80100-camcc.h @@ -0,0 +1,135 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_X1E80100_H +#define _DT_BINDINGS_CLK_QCOM_CAM_CC_X1E80100_H + +/* CAM_CC clocks */ +#define CAM_CC_BPS_AHB_CLK 0 +#define CAM_CC_BPS_CLK 1 +#define CAM_CC_BPS_CLK_SRC 2 +#define CAM_CC_BPS_FAST_AHB_CLK 3 +#define CAM_CC_CAMNOC_AXI_NRT_CLK 4 +#define CAM_CC_CAMNOC_AXI_RT_CLK 5 +#define CAM_CC_CAMNOC_AXI_RT_CLK_SRC 6 +#define CAM_CC_CAMNOC_DCD_XO_CLK 7 +#define CAM_CC_CAMNOC_XO_CLK 8 +#define CAM_CC_CCI_0_CLK 9 +#define CAM_CC_CCI_0_CLK_SRC 10 +#define CAM_CC_CCI_1_CLK 11 +#define CAM_CC_CCI_1_CLK_SRC 12 +#define CAM_CC_CORE_AHB_CLK 13 +#define CAM_CC_CPAS_AHB_CLK 14 +#define CAM_CC_CPAS_BPS_CLK 15 +#define CAM_CC_CPAS_FAST_AHB_CLK 16 +#define CAM_CC_CPAS_IFE_0_CLK 17 +#define CAM_CC_CPAS_IFE_1_CLK 18 +#define CAM_CC_CPAS_IFE_LITE_CLK 19 +#define CAM_CC_CPAS_IPE_NPS_CLK 20 +#define CAM_CC_CPAS_SFE_0_CLK 21 +#define CAM_CC_CPHY_RX_CLK_SRC 22 +#define CAM_CC_CSI0PHYTIMER_CLK 23 +#define CAM_CC_CSI0PHYTIMER_CLK_SRC 24 +#define CAM_CC_CSI1PHYTIMER_CLK 25 +#define CAM_CC_CSI1PHYTIMER_CLK_SRC 26 +#define CAM_CC_CSI2PHYTIMER_CLK 27 +#define CAM_CC_CSI2PHYTIMER_CLK_SRC 28 +#define CAM_CC_CSI3PHYTIMER_CLK 29 +#define CAM_CC_CSI3PHYTIMER_CLK_SRC 30 +#define CAM_CC_CSI4PHYTIMER_CLK 31 +#define CAM_CC_CSI4PHYTIMER_CLK_SRC 32 +#define CAM_CC_CSI5PHYTIMER_CLK 33 +#define CAM_CC_CSI5PHYTIMER_CLK_SRC 34 +#define CAM_CC_CSID_CLK 35 +#define CAM_CC_CSID_CLK_SRC 36 +#define CAM_CC_CSID_CSIPHY_RX_CLK 37 +#define CAM_CC_CSIPHY0_CLK 38 +#define CAM_CC_CSIPHY1_CLK 39 +#define CAM_CC_CSIPHY2_CLK 40 +#define CAM_CC_CSIPHY3_CLK 41 +#define CAM_CC_CSIPHY4_CLK 42 +#define CAM_CC_CSIPHY5_CLK 43 +#define CAM_CC_FAST_AHB_CLK_SRC 44 +#define CAM_CC_GDSC_CLK 45 +#define CAM_CC_ICP_AHB_CLK 46 +#define CAM_CC_ICP_CLK 47 +#define CAM_CC_ICP_CLK_SRC 48 +#define CAM_CC_IFE_0_CLK 49 +#define CAM_CC_IFE_0_CLK_SRC 50 +#define CAM_CC_IFE_0_DSP_CLK 51 +#define CAM_CC_IFE_0_FAST_AHB_CLK 52 +#define CAM_CC_IFE_1_CLK 53 +#define CAM_CC_IFE_1_CLK_SRC 54 +#define CAM_CC_IFE_1_DSP_CLK 55 +#define CAM_CC_IFE_1_FAST_AHB_CLK 56 +#define CAM_CC_IFE_LITE_AHB_CLK 57 +#define CAM_CC_IFE_LITE_CLK 58 +#define CAM_CC_IFE_LITE_CLK_SRC 59 +#define CAM_CC_IFE_LITE_CPHY_RX_CLK 60 +#define CAM_CC_IFE_LITE_CSID_CLK 61 +#define CAM_CC_IFE_LITE_CSID_CLK_SRC 62 +#define CAM_CC_IPE_NPS_AHB_CLK 63 +#define CAM_CC_IPE_NPS_CLK 64 +#define CAM_CC_IPE_NPS_CLK_SRC 65 +#define CAM_CC_IPE_NPS_FAST_AHB_CLK 66 +#define CAM_CC_IPE_PPS_CLK 67 +#define CAM_CC_IPE_PPS_FAST_AHB_CLK 68 +#define CAM_CC_JPEG_CLK 69 +#define CAM_CC_JPEG_CLK_SRC 70 +#define CAM_CC_MCLK0_CLK 71 +#define CAM_CC_MCLK0_CLK_SRC 72 +#define CAM_CC_MCLK1_CLK 73 +#define CAM_CC_MCLK1_CLK_SRC 74 +#define CAM_CC_MCLK2_CLK 75 +#define CAM_CC_MCLK2_CLK_SRC 76 +#define CAM_CC_MCLK3_CLK 77 +#define CAM_CC_MCLK3_CLK_SRC 78 +#define CAM_CC_MCLK4_CLK 79 +#define CAM_CC_MCLK4_CLK_SRC 80 +#define CAM_CC_MCLK5_CLK 81 +#define CAM_CC_MCLK5_CLK_SRC 82 +#define CAM_CC_MCLK6_CLK 83 +#define CAM_CC_MCLK6_CLK_SRC 84 +#define CAM_CC_MCLK7_CLK 85 +#define CAM_CC_MCLK7_CLK_SRC 86 +#define CAM_CC_PLL0 87 +#define CAM_CC_PLL0_OUT_EVEN 88 +#define CAM_CC_PLL0_OUT_ODD 89 +#define CAM_CC_PLL1 90 +#define CAM_CC_PLL1_OUT_EVEN 91 +#define CAM_CC_PLL2 92 +#define CAM_CC_PLL3 93 +#define CAM_CC_PLL3_OUT_EVEN 94 +#define CAM_CC_PLL4 95 +#define CAM_CC_PLL4_OUT_EVEN 96 +#define CAM_CC_PLL6 97 +#define CAM_CC_PLL6_OUT_EVEN 98 +#define CAM_CC_PLL8 99 +#define CAM_CC_PLL8_OUT_EVEN 100 +#define CAM_CC_SFE_0_CLK 101 +#define CAM_CC_SFE_0_CLK_SRC 102 +#define CAM_CC_SFE_0_FAST_AHB_CLK 103 +#define CAM_CC_SLEEP_CLK 104 +#define CAM_CC_SLEEP_CLK_SRC 105 +#define CAM_CC_SLOW_AHB_CLK_SRC 106 +#define CAM_CC_XO_CLK_SRC 107 + +/* CAM_CC power domains */ +#define CAM_CC_BPS_GDSC 0 +#define CAM_CC_IFE_0_GDSC 1 +#define CAM_CC_IFE_1_GDSC 2 +#define CAM_CC_IPE_0_GDSC 3 +#define CAM_CC_SFE_0_GDSC 4 +#define CAM_CC_TITAN_TOP_GDSC 5 + +/* CAM_CC resets */ +#define CAM_CC_BPS_BCR 0 +#define CAM_CC_ICP_BCR 1 +#define CAM_CC_IFE_0_BCR 2 +#define CAM_CC_IFE_1_BCR 3 +#define CAM_CC_IPE_0_BCR 4 +#define CAM_CC_SFE_0_BCR 5 + +#endif diff --git a/include/dt-bindings/clock/qcom,x1e80100-dispcc.h b/include/dt-bindings/clock/qcom,x1e80100-dispcc.h new file mode 100644 index 000000000000..d4a83e4fd0d1 --- /dev/null +++ b/include/dt-bindings/clock/qcom,x1e80100-dispcc.h @@ -0,0 +1,98 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_X1E80100_DISP_CC_H +#define _DT_BINDINGS_CLK_QCOM_X1E80100_DISP_CC_H + +/* DISP_CC clocks */ +#define DISP_CC_MDSS_ACCU_CLK 0 +#define DISP_CC_MDSS_AHB1_CLK 1 +#define DISP_CC_MDSS_AHB_CLK 2 +#define DISP_CC_MDSS_AHB_CLK_SRC 3 +#define DISP_CC_MDSS_BYTE0_CLK 4 +#define DISP_CC_MDSS_BYTE0_CLK_SRC 5 +#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC 6 +#define DISP_CC_MDSS_BYTE0_INTF_CLK 7 +#define DISP_CC_MDSS_BYTE1_CLK 8 +#define DISP_CC_MDSS_BYTE1_CLK_SRC 9 +#define DISP_CC_MDSS_BYTE1_DIV_CLK_SRC 10 +#define DISP_CC_MDSS_BYTE1_INTF_CLK 11 +#define DISP_CC_MDSS_DPTX0_AUX_CLK 12 +#define DISP_CC_MDSS_DPTX0_AUX_CLK_SRC 13 +#define DISP_CC_MDSS_DPTX0_LINK_CLK 14 +#define DISP_CC_MDSS_DPTX0_LINK_CLK_SRC 15 +#define DISP_CC_MDSS_DPTX0_LINK_DIV_CLK_SRC 16 +#define DISP_CC_MDSS_DPTX0_LINK_INTF_CLK 17 +#define DISP_CC_MDSS_DPTX0_PIXEL0_CLK 18 +#define DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC 19 +#define DISP_CC_MDSS_DPTX0_PIXEL1_CLK 20 +#define DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC 21 +#define DISP_CC_MDSS_DPTX0_USB_ROUTER_LINK_INTF_CLK 22 +#define DISP_CC_MDSS_DPTX1_AUX_CLK 23 +#define DISP_CC_MDSS_DPTX1_AUX_CLK_SRC 24 +#define DISP_CC_MDSS_DPTX1_LINK_CLK 25 +#define DISP_CC_MDSS_DPTX1_LINK_CLK_SRC 26 +#define DISP_CC_MDSS_DPTX1_LINK_DIV_CLK_SRC 27 +#define DISP_CC_MDSS_DPTX1_LINK_INTF_CLK 28 +#define DISP_CC_MDSS_DPTX1_PIXEL0_CLK 29 +#define DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC 30 +#define DISP_CC_MDSS_DPTX1_PIXEL1_CLK 31 +#define DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC 32 +#define DISP_CC_MDSS_DPTX1_USB_ROUTER_LINK_INTF_CLK 33 +#define DISP_CC_MDSS_DPTX2_AUX_CLK 34 +#define DISP_CC_MDSS_DPTX2_AUX_CLK_SRC 35 +#define DISP_CC_MDSS_DPTX2_LINK_CLK 36 +#define DISP_CC_MDSS_DPTX2_LINK_CLK_SRC 37 +#define DISP_CC_MDSS_DPTX2_LINK_DIV_CLK_SRC 38 +#define DISP_CC_MDSS_DPTX2_LINK_INTF_CLK 39 +#define DISP_CC_MDSS_DPTX2_PIXEL0_CLK 40 +#define DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC 41 +#define DISP_CC_MDSS_DPTX2_PIXEL1_CLK 42 +#define DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC 43 +#define DISP_CC_MDSS_DPTX2_USB_ROUTER_LINK_INTF_CLK 44 +#define DISP_CC_MDSS_DPTX3_AUX_CLK 45 +#define DISP_CC_MDSS_DPTX3_AUX_CLK_SRC 46 +#define DISP_CC_MDSS_DPTX3_LINK_CLK 47 +#define DISP_CC_MDSS_DPTX3_LINK_CLK_SRC 48 +#define DISP_CC_MDSS_DPTX3_LINK_DIV_CLK_SRC 49 +#define DISP_CC_MDSS_DPTX3_LINK_INTF_CLK 50 +#define DISP_CC_MDSS_DPTX3_PIXEL0_CLK 51 +#define DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC 52 +#define DISP_CC_MDSS_ESC0_CLK 53 +#define DISP_CC_MDSS_ESC0_CLK_SRC 54 +#define DISP_CC_MDSS_ESC1_CLK 55 +#define DISP_CC_MDSS_ESC1_CLK_SRC 56 +#define DISP_CC_MDSS_MDP1_CLK 57 +#define DISP_CC_MDSS_MDP_CLK 58 +#define DISP_CC_MDSS_MDP_CLK_SRC 59 +#define DISP_CC_MDSS_MDP_LUT1_CLK 60 +#define DISP_CC_MDSS_MDP_LUT_CLK 61 +#define DISP_CC_MDSS_NON_GDSC_AHB_CLK 62 +#define DISP_CC_MDSS_PCLK0_CLK 63 +#define DISP_CC_MDSS_PCLK0_CLK_SRC 64 +#define DISP_CC_MDSS_PCLK1_CLK 65 +#define DISP_CC_MDSS_PCLK1_CLK_SRC 66 +#define DISP_CC_MDSS_RSCC_AHB_CLK 67 +#define DISP_CC_MDSS_RSCC_VSYNC_CLK 68 +#define DISP_CC_MDSS_VSYNC1_CLK 69 +#define DISP_CC_MDSS_VSYNC_CLK 70 +#define DISP_CC_MDSS_VSYNC_CLK_SRC 71 +#define DISP_CC_PLL0 72 +#define DISP_CC_PLL1 73 +#define DISP_CC_SLEEP_CLK 74 +#define DISP_CC_SLEEP_CLK_SRC 75 +#define DISP_CC_XO_CLK 76 +#define DISP_CC_XO_CLK_SRC 77 + +/* DISP_CC resets */ +#define DISP_CC_MDSS_CORE_BCR 0 +#define DISP_CC_MDSS_CORE_INT2_BCR 1 +#define DISP_CC_MDSS_RSCC_BCR 2 + +/* DISP_CC GDSCR */ +#define MDSS_GDSC 0 +#define MDSS_INT2_GDSC 1 + +#endif diff --git a/include/dt-bindings/clock/qcom,x1e80100-gpucc.h b/include/dt-bindings/clock/qcom,x1e80100-gpucc.h new file mode 100644 index 000000000000..61a3a8f3ac43 --- /dev/null +++ b/include/dt-bindings/clock/qcom,x1e80100-gpucc.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_X1E80100_GPU_CC_H +#define _DT_BINDINGS_CLK_QCOM_X1E80100_GPU_CC_H + +/* GPU_CC clocks */ +#define GPU_CC_AHB_CLK 0 +#define GPU_CC_CB_CLK 1 +#define GPU_CC_CRC_AHB_CLK 2 +#define GPU_CC_CX_FF_CLK 3 +#define GPU_CC_CX_GMU_CLK 4 +#define GPU_CC_CXO_AON_CLK 5 +#define GPU_CC_CXO_CLK 6 +#define GPU_CC_DEMET_CLK 7 +#define GPU_CC_DEMET_DIV_CLK_SRC 8 +#define GPU_CC_FF_CLK_SRC 9 +#define GPU_CC_FREQ_MEASURE_CLK 10 +#define GPU_CC_GMU_CLK_SRC 11 +#define GPU_CC_GX_GMU_CLK 12 +#define GPU_CC_GX_VSENSE_CLK 13 +#define GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK 14 +#define GPU_CC_HUB_AON_CLK 15 +#define GPU_CC_HUB_CLK_SRC 16 +#define GPU_CC_HUB_CX_INT_CLK 17 +#define GPU_CC_MEMNOC_GFX_CLK 18 +#define GPU_CC_MND1X_0_GFX3D_CLK 19 +#define GPU_CC_MND1X_1_GFX3D_CLK 20 +#define GPU_CC_PLL0 21 +#define GPU_CC_PLL1 22 +#define GPU_CC_SLEEP_CLK 23 +#define GPU_CC_XO_CLK_SRC 24 +#define GPU_CC_XO_DIV_CLK_SRC 25 + +/* GDSCs */ +#define GPU_CX_GDSC 0 +#define GPU_GX_GDSC 1 + +#endif diff --git a/include/dt-bindings/clock/qcom,x1e80100-tcsr.h b/include/dt-bindings/clock/qcom,x1e80100-tcsr.h new file mode 100644 index 000000000000..bae2c4654ee2 --- /dev/null +++ b/include/dt-bindings/clock/qcom,x1e80100-tcsr.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_X1E80100_TCSR_CC_H +#define _DT_BINDINGS_CLK_QCOM_X1E80100_TCSR_CC_H + +/* TCSR CC clocks */ +#define TCSR_PCIE_2L_4_CLKREF_EN 0 +#define TCSR_PCIE_2L_5_CLKREF_EN 1 +#define TCSR_PCIE_8L_CLKREF_EN 2 +#define TCSR_USB3_MP0_CLKREF_EN 3 +#define TCSR_USB3_MP1_CLKREF_EN 4 +#define TCSR_USB2_1_CLKREF_EN 5 +#define TCSR_UFS_PHY_CLKREF_EN 6 +#define TCSR_USB4_1_CLKREF_EN 7 +#define TCSR_USB4_2_CLKREF_EN 8 +#define TCSR_USB2_2_CLKREF_EN 9 +#define TCSR_PCIE_4L_CLKREF_EN 10 +#define TCSR_EDP_CLKREF_EN 11 + +#endif diff --git a/include/dt-bindings/reset/qcom,x1e80100-gpucc.h b/include/dt-bindings/reset/qcom,x1e80100-gpucc.h new file mode 100644 index 000000000000..32b43e71a16f --- /dev/null +++ b/include/dt-bindings/reset/qcom,x1e80100-gpucc.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _DT_BINDINGS_RESET_QCOM_X1E80100_GPU_CC_H +#define _DT_BINDINGS_RESET_QCOM_X1E80100_GPU_CC_H + +#define GPUCC_GPU_CC_ACD_BCR 0 +#define GPUCC_GPU_CC_CB_BCR 1 +#define GPUCC_GPU_CC_CX_BCR 2 +#define GPUCC_GPU_CC_FAST_HUB_BCR 3 +#define GPUCC_GPU_CC_FF_BCR 4 +#define GPUCC_GPU_CC_GFX3D_AON_BCR 5 +#define GPUCC_GPU_CC_GMU_BCR 6 +#define GPUCC_GPU_CC_GX_BCR 7 +#define GPUCC_GPU_CC_XO_BCR 8 + +#endif |