summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-driver-ufs885
-rw-r--r--Documentation/devicetree/bindings/scsi/hisilicon-sas.txt7
-rw-r--r--Documentation/driver-api/scsi.rst6
-rw-r--r--Documentation/scsi/ChangeLog.1992-19972023
-rw-r--r--Documentation/scsi/Mylex.txt5
-rw-r--r--Documentation/scsi/scsi-parameters.txt14
-rw-r--r--Documentation/scsi/scsi_mid_low_api.txt122
-rw-r--r--Documentation/scsi/sd-parameters.txt22
-rw-r--r--Documentation/scsi/tmscsim.txt443
-rw-r--r--MAINTAINERS12
-rw-r--r--arch/powerpc/configs/c2k_defconfig1
-rw-r--r--drivers/scsi/Kconfig114
-rw-r--r--drivers/scsi/Makefile5
-rw-r--r--drivers/scsi/NCR53c406a.c1090
-rw-r--r--drivers/scsi/aacraid/aacraid.h5
-rw-r--r--drivers/scsi/aacraid/src.c205
-rw-r--r--drivers/scsi/aha1740.c2
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_core.c8
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_seq.h_shipped3
-rw-r--r--drivers/scsi/aic7xxx/aic7xxx_core.c8
-rw-r--r--drivers/scsi/aic7xxx/aic7xxx_seq.h_shipped3
-rw-r--r--drivers/scsi/aic7xxx/aicasm/aicasm.c3
-rw-r--r--drivers/scsi/arcmsr/arcmsr.h4
-rw-r--r--drivers/scsi/arcmsr/arcmsr_hba.c90
-rw-r--r--drivers/scsi/atp870u.c4
-rw-r--r--drivers/scsi/bfa/bfad_bsg.c2
-rw-r--r--drivers/scsi/csiostor/csio_attr.c16
-rw-r--r--drivers/scsi/csiostor/csio_hw.c275
-rw-r--r--drivers/scsi/csiostor/csio_hw.h59
-rw-r--r--drivers/scsi/csiostor/csio_lnode.c8
-rw-r--r--drivers/scsi/csiostor/csio_mb.c70
-rw-r--r--drivers/scsi/csiostor/csio_mb.h9
-rw-r--r--drivers/scsi/device_handler/scsi_dh_alua.c10
-rw-r--r--drivers/scsi/device_handler/scsi_dh_emc.c2
-rw-r--r--drivers/scsi/device_handler/scsi_dh_rdac.c2
-rw-r--r--drivers/scsi/dpt_i2o.c27
-rw-r--r--drivers/scsi/dpti.h1
-rw-r--r--drivers/scsi/eata.c2571
-rw-r--r--drivers/scsi/eata_generic.h401
-rw-r--r--drivers/scsi/eata_pio.c966
-rw-r--r--drivers/scsi/eata_pio.h54
-rw-r--r--drivers/scsi/esas2r/esas2r.h2
-rw-r--r--drivers/scsi/esas2r/esas2r_init.c21
-rw-r--r--drivers/scsi/esas2r/esas2r_main.c72
-rw-r--r--drivers/scsi/fdomain.c1783
-rw-r--r--drivers/scsi/fdomain.h24
-rw-r--r--drivers/scsi/hisi_sas/Kconfig2
-rw-r--r--drivers/scsi/hisi_sas/hisi_sas.h1
-rw-r--r--drivers/scsi/hisi_sas/hisi_sas_main.c34
-rw-r--r--drivers/scsi/hisi_sas/hisi_sas_v1_hw.c13
-rw-r--r--drivers/scsi/hisi_sas/hisi_sas_v2_hw.c62
-rw-r--r--drivers/scsi/hisi_sas/hisi_sas_v3_hw.c72
-rw-r--r--drivers/scsi/hosts.c36
-rw-r--r--drivers/scsi/ipr.c53
-rw-r--r--drivers/scsi/ipr.h2
-rw-r--r--drivers/scsi/ips.c4
-rw-r--r--drivers/scsi/isci/host.c2
-rw-r--r--drivers/scsi/jazz_esp.c2
-rw-r--r--drivers/scsi/libfc/fc_disc.c2
-rw-r--r--drivers/scsi/libsas/sas_ata.c2
-rw-r--r--drivers/scsi/libsas/sas_discover.c13
-rw-r--r--drivers/scsi/libsas/sas_expander.c29
-rw-r--r--drivers/scsi/libsas/sas_init.c2
-rw-r--r--drivers/scsi/libsas/sas_port.c5
-rw-r--r--drivers/scsi/lpfc/lpfc.h23
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c107
-rw-r--r--drivers/scsi/lpfc/lpfc_bsg.c6
-rw-r--r--drivers/scsi/lpfc/lpfc_crtn.h5
-rw-r--r--drivers/scsi/lpfc/lpfc_ct.c8
-rw-r--r--drivers/scsi/lpfc/lpfc_debugfs.c22
-rw-r--r--drivers/scsi/lpfc/lpfc_debugfs.h13
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c11
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c13
-rw-r--r--drivers/scsi/lpfc/lpfc_hw.h15
-rw-r--r--drivers/scsi/lpfc/lpfc_hw4.h141
-rw-r--r--drivers/scsi/lpfc/lpfc_ids.h4
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c320
-rw-r--r--drivers/scsi/lpfc/lpfc_mbox.c10
-rw-r--r--drivers/scsi/lpfc/lpfc_mem.c12
-rw-r--r--drivers/scsi/lpfc/lpfc_nportdisc.c22
-rw-r--r--drivers/scsi/lpfc/lpfc_nvme.c427
-rw-r--r--drivers/scsi/lpfc/lpfc_nvme.h4
-rw-r--r--drivers/scsi/lpfc/lpfc_nvmet.c470
-rw-r--r--drivers/scsi/lpfc/lpfc_nvmet.h10
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c64
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c692
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.h6
-rw-r--r--drivers/scsi/lpfc/lpfc_sli4.h42
-rw-r--r--drivers/scsi/lpfc/lpfc_version.h8
-rw-r--r--drivers/scsi/megaraid/megaraid_sas_base.c3
-rw-r--r--drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h1
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_base.c699
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_base.h19
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_config.c3
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_ctl.c22
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_scsih.c74
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_transport.c8
-rw-r--r--drivers/scsi/mvme147.c107
-rw-r--r--drivers/scsi/mvsas/mv_94xx.c23
-rw-r--r--drivers/scsi/pcmcia/Kconfig9
-rw-r--r--drivers/scsi/pcmcia/Makefile2
-rw-r--r--drivers/scsi/pcmcia/fdomain_core.c2
-rw-r--r--drivers/scsi/pcmcia/fdomain_stub.c209
-rw-r--r--drivers/scsi/pmcraid.c51
-rw-r--r--drivers/scsi/pmcraid.h3
-rw-r--r--drivers/scsi/qedf/qedf_dbg.c2
-rw-r--r--drivers/scsi/qedf/qedf_dbg.h17
-rw-r--r--drivers/scsi/qedf/qedf_debugfs.c6
-rw-r--r--drivers/scsi/qedf/qedf_io.c2
-rw-r--r--drivers/scsi/qedf/qedf_main.c8
-rw-r--r--drivers/scsi/qedi/qedi_dbg.h4
-rw-r--r--drivers/scsi/qedi/qedi_debugfs.c4
-rw-r--r--drivers/scsi/qedi/qedi_gbl.h4
-rw-r--r--drivers/scsi/qedi/qedi_main.c4
-rw-r--r--drivers/scsi/qla2xxx/qla_bsg.c3
-rw-r--r--drivers/scsi/qla2xxx/qla_dbg.c8
-rw-r--r--drivers/scsi/qla2xxx/qla_def.h12
-rw-r--r--drivers/scsi/qla2xxx/qla_gbl.h4
-rw-r--r--drivers/scsi/qla2xxx/qla_gs.c353
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c72
-rw-r--r--drivers/scsi/qla2xxx/qla_inline.h1
-rw-r--r--drivers/scsi/qla2xxx/qla_iocb.c25
-rw-r--r--drivers/scsi/qla2xxx/qla_isr.c101
-rw-r--r--drivers/scsi/qla2xxx/qla_mbx.c33
-rw-r--r--drivers/scsi/qla2xxx/qla_mid.c6
-rw-r--r--drivers/scsi/qla2xxx/qla_mr.c36
-rw-r--r--drivers/scsi/qla2xxx/qla_nvme.c245
-rw-r--r--drivers/scsi/qla2xxx/qla_nvme.h9
-rw-r--r--drivers/scsi/qla2xxx/qla_nx.c7
-rw-r--r--drivers/scsi/qla2xxx/qla_nx2.c19
-rw-r--r--drivers/scsi/qla2xxx/qla_nx2.h4
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c14
-rw-r--r--drivers/scsi/qla2xxx/qla_sup.c1
-rw-r--r--drivers/scsi/qla2xxx/qla_target.c29
-rw-r--r--drivers/scsi/qla2xxx/qla_target.h2
-rw-r--r--drivers/scsi/qla2xxx/qla_version.h2
-rw-r--r--drivers/scsi/qla4xxx/ql4_mbx.c6
-rw-r--r--drivers/scsi/qla4xxx/ql4_nx.c2
-rw-r--r--drivers/scsi/qla4xxx/ql4_nx.h7
-rw-r--r--drivers/scsi/qla4xxx/ql4_os.c4
-rw-r--r--drivers/scsi/raid_class.c1
-rw-r--r--drivers/scsi/scsi.c2
-rw-r--r--drivers/scsi/scsi_debug.c241
-rw-r--r--drivers/scsi/scsi_devinfo.c13
-rw-r--r--drivers/scsi/scsi_error.c8
-rw-r--r--drivers/scsi/scsi_lib.c27
-rw-r--r--drivers/scsi/scsi_module.c73
-rw-r--r--drivers/scsi/scsi_sysfs.c11
-rw-r--r--drivers/scsi/scsi_transport_spi.c4
-rw-r--r--drivers/scsi/sd_zbc.c3
-rw-r--r--drivers/scsi/smartpqi/smartpqi_init.c89
-rw-r--r--drivers/scsi/sun3x_esp.c2
-rw-r--r--drivers/scsi/sym53c416.c844
-rw-r--r--drivers/scsi/sym53c416.h33
-rw-r--r--drivers/scsi/ufs/Makefile3
-rw-r--r--drivers/scsi/ufs/tc-dwc-g210-pci.c4
-rw-r--r--drivers/scsi/ufs/tc-dwc-g210-pltfrm.c2
-rw-r--r--drivers/scsi/ufs/ufs-sysfs.c817
-rw-r--r--drivers/scsi/ufs/ufs-sysfs.h17
-rw-r--r--drivers/scsi/ufs/ufs.h115
-rw-r--r--drivers/scsi/ufs/ufshcd-pci.c7
-rw-r--r--drivers/scsi/ufs/ufshcd.c338
-rw-r--r--drivers/scsi/ufs/ufshcd.h37
-rw-r--r--drivers/scsi/ufs/ufshci.h7
-rw-r--r--include/linux/raid_class.h1
-rw-r--r--include/scsi/scsi.h2
-rw-r--r--include/scsi/scsi_host.h36
168 files changed, 6214 insertions, 13066 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
new file mode 100644
index 000000000000..016724ec26d5
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -0,0 +1,885 @@
+What: /sys/bus/*/drivers/ufshcd/*/auto_hibern8
+Date: March 2018
+Contact: linux-scsi@vger.kernel.org
+Description:
+ This file contains the auto-hibernate idle timer setting of a
+ UFS host controller. A value of '0' means auto-hibernate is not
+ enabled. Otherwise the value is the number of microseconds of
+ idle time before the UFS host controller will autonomously put
+ the link into hibernate state. That will save power at the
+ expense of increased latency. Note that the hardware supports
+ 10-bit values with a power-of-ten multiplier which allows a
+ maximum value of 102300000. Refer to the UFS Host Controller
+ Interface specification for more details.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_type
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the device type. This is one of the UFS
+ device descriptor parameters. The full information about
+ the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the device class. This is one of the UFS
+ device descriptor parameters. The full information about
+ the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the UFS storage subclass. This is one of
+ the UFS device descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the protocol supported by an UFS device.
+ This is one of the UFS device descriptor parameters.
+ The full information about the descriptor could be found
+ at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows number of logical units. This is one of
+ the UFS device descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows number of well known logical units.
+ This is one of the UFS device descriptor parameters.
+ The full information about the descriptor could be found
+ at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows value that indicates whether the device is
+ enabled for boot. This is one of the UFS device descriptor
+ parameters. The full information about the descriptor could
+ be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows value that indicates whether the device
+ descriptor could be read after partial initialization phase
+ of the boot sequence. This is one of the UFS device descriptor
+ parameters. The full information about the descriptor could
+ be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows value that defines the power mode after
+ device initialization or hardware reset. This is one of
+ the UFS device descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the high priority lun. This is one of
+ the UFS device descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the secure removal type. This is one of
+ the UFS device descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether the security lun is supported.
+ This is one of the UFS device descriptor parameters.
+ The full information about the descriptor could be found
+ at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the background operations termination
+ latency. This is one of the UFS device descriptor parameters.
+ The full information about the descriptor could be found
+ at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the initial active ICC level. This is one
+ of the UFS device descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the specification version. This is one
+ of the UFS device descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the manufacturing date in BCD format.
+ This is one of the UFS device descriptor parameters.
+ The full information about the descriptor could be found
+ at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the manufacturee ID. This is one of the
+ UFS device descriptor parameters. The full information about
+ the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the maximum number of outstanding RTTs
+ supported by the device. This is one of the UFS device
+ descriptor parameters. The full information about
+ the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the frequency and method of the realtime
+ clock update. This is one of the UFS device descriptor
+ parameters. The full information about the descriptor
+ could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows which features are supported by the device.
+ This is one of the UFS device descriptor parameters.
+ The full information about the descriptor could be
+ found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the FFU timeout. This is one of the
+ UFS device descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the device queue depth. This is one of the
+ UFS device descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the device version. This is one of the
+ UFS device descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows number of secure write protect areas
+ supported by the device. This is one of the UFS device
+ descriptor parameters. The full information about
+ the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the maximum amount of data that may be
+ written during the pre-soldering phase of the PSA flow.
+ This is one of the UFS device descriptor parameters.
+ The full information about the descriptor could be found
+ at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the command maximum timeout for a change
+ in PSA state. This is one of the UFS device descriptor
+ parameters. The full information about the descriptor could
+ be found at UFS specifications 2.1.
+ The file is read only.
+
+
+What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/unipro_version
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the MIPI UniPro version number in BCD format.
+ This is one of the UFS interconnect descriptor parameters.
+ The full information about the descriptor could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/mphy_version
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the MIPI M-PHY version number in BCD format.
+ This is one of the UFS interconnect descriptor parameters.
+ The full information about the descriptor could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/raw_device_capacity
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the total memory quantity available to
+ the user to configure the device logical units. This is one
+ of the UFS geometry descriptor parameters. The full
+ information about the descriptor could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_luns
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the maximum number of logical units
+ supported by the UFS device. This is one of the UFS
+ geometry descriptor parameters. The full information about
+ the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/segment_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the segment size. This is one of the UFS
+ geometry descriptor parameters. The full information about
+ the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/allocation_unit_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the allocation unit size. This is one of
+ the UFS geometry descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/min_addressable_block_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the minimum addressable block size. This
+ is one of the UFS geometry descriptor parameters. The full
+ information about the descriptor could be found at UFS
+ specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_read_block_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the optimal read block size. This is one
+ of the UFS geometry descriptor parameters. The full
+ information about the descriptor could be found at UFS
+ specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_write_block_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the optimal write block size. This is one
+ of the UFS geometry descriptor parameters. The full
+ information about the descriptor could be found at UFS
+ specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_in_buffer_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the maximum data-in buffer size. This
+ is one of the UFS geometry descriptor parameters. The full
+ information about the descriptor could be found at UFS
+ specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_out_buffer_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the maximum data-out buffer size. This
+ is one of the UFS geometry descriptor parameters. The full
+ information about the descriptor could be found at UFS
+ specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/rpmb_rw_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the maximum number of RPMB frames allowed
+ in Security Protocol In/Out. This is one of the UFS geometry
+ descriptor parameters. The full information about the
+ descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/dyn_capacity_resource_policy
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the dynamic capacity resource policy. This
+ is one of the UFS geometry descriptor parameters. The full
+ information about the descriptor could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/data_ordering
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows support for out-of-order data transfer.
+ This is one of the UFS geometry descriptor parameters.
+ The full information about the descriptor could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_contexts
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows maximum available number of contexts which
+ are supported by the device. This is one of the UFS geometry
+ descriptor parameters. The full information about the
+ descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_unit_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows system data tag unit size. This is one of
+ the UFS geometry descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_resource_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows maximum storage area size allocated by
+ the device to handle system data by the tagging mechanism.
+ This is one of the UFS geometry descriptor parameters.
+ The full information about the descriptor could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/secure_removal_types
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows supported secure removal types. This is
+ one of the UFS geometry descriptor parameters. The full
+ information about the descriptor could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/memory_types
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows supported memory types. This is one of
+ the UFS geometry descriptor parameters. The full
+ information about the descriptor could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_max_alloc_units
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the maximum number of allocation units for
+ different memory types (system code, non persistent,
+ enhanced type 1-4). This is one of the UFS geometry
+ descriptor parameters. The full information about the
+ descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_capacity_adjustment_factor
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the memory capacity adjustment factor for
+ different memory types (system code, non persistent,
+ enhanced type 1-4). This is one of the UFS geometry
+ descriptor parameters. The full information about the
+ descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+
+What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/eol_info
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows preend of life information. This is one
+ of the UFS health descriptor parameters. The full
+ information about the descriptor could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_a
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows indication of the device life time
+ (method a). This is one of the UFS health descriptor
+ parameters. The full information about the descriptor
+ could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_b
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows indication of the device life time
+ (method b). This is one of the UFS health descriptor
+ parameters. The full information about the descriptor
+ could be found at UFS specifications 2.1.
+ The file is read only.
+
+
+What: /sys/bus/platform/drivers/ufshcd/*/power_descriptor/active_icc_levels_vcc*
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows maximum VCC, VCCQ and VCCQ2 value for
+ active ICC levels from 0 to 15. This is one of the UFS
+ power descriptor parameters. The full information about
+ the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+
+What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/manufacturer_name
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file contains a device manufactureer name string.
+ The full information about the descriptor could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_name
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file contains a product name string. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/oem_id
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file contains a OEM ID string. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/serial_number
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file contains a device serial number string. The full
+ information about the descriptor could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_revision
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file contains a product revision string. The full
+ information about the descriptor could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+
+What: /sys/class/scsi_device/*/device/unit_descriptor/boot_lun_id
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows boot LUN information. This is one of
+ the UFS unit descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/class/scsi_device/*/device/unit_descriptor/lun_write_protect
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows LUN write protection status. This is one of
+ the UFS unit descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/class/scsi_device/*/device/unit_descriptor/lun_queue_depth
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows LUN queue depth. This is one of the UFS
+ unit descriptor parameters. The full information about
+ the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/class/scsi_device/*/device/unit_descriptor/psa_sensitive
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows PSA sensitivity. This is one of the UFS
+ unit descriptor parameters. The full information about
+ the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/class/scsi_device/*/device/unit_descriptor/lun_memory_type
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows LUN memory type. This is one of the UFS
+ unit descriptor parameters. The full information about
+ the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/class/scsi_device/*/device/unit_descriptor/data_reliability
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file defines the device behavior when a power failure
+ occurs during a write operation. This is one of the UFS
+ unit descriptor parameters. The full information about
+ the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the size of addressable logical blocks
+ (calculated as an exponent with base 2). This is one of
+ the UFS unit descriptor parameters. The full information about
+ the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_count
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows total number of addressable logical blocks.
+ This is one of the UFS unit descriptor parameters. The full
+ information about the descriptor could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/class/scsi_device/*/device/unit_descriptor/erase_block_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the erase block size. This is one of
+ the UFS unit descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/class/scsi_device/*/device/unit_descriptor/provisioning_type
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the thin provisioning type. This is one of
+ the UFS unit descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the total physical memory resources. This is
+ one of the UFS unit descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/class/scsi_device/*/device/unit_descriptor/context_capabilities
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the context capabilities. This is one of
+ the UFS unit descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/class/scsi_device/*/device/unit_descriptor/large_unit_granularity
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the granularity of the LUN. This is one of
+ the UFS unit descriptor parameters. The full information
+ about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/device_init
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the device init status. The full information
+ about the flag could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether permanent write protection is enabled.
+ The full information about the flag could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether write protection is enabled on all
+ logical units configured as power on write protected. The
+ full information about the flag could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether the device background operations are
+ enabled. The full information about the flag could be
+ found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether the device life span mode is enabled.
+ The full information about the flag could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether physical resource removal is enable.
+ The full information about the flag could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether the device is executing internal
+ operation related to real time clock. The full information
+ about the flag could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether the device FW update is permanently
+ disabled. The full information about the flag could be found
+ at UFS specifications 2.1.
+ The file is read only.
+
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/boot_lun_enabled
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file provides the boot lun enabled UFS device attribute.
+ The full information about the attribute could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file provides the current power mode UFS device attribute.
+ The full information about the attribute could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file provides the active icc level UFS device attribute.
+ The full information about the attribute could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file provides the out of order data transfer enabled UFS
+ device attribute. The full information about the attribute
+ could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file provides the background operations status UFS device
+ attribute. The full information about the attribute could
+ be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/purge_status
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file provides the purge operation status UFS device
+ attribute. The full information about the attribute could
+ be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the maximum data size in a DATA IN
+ UPIU. The full information about the attribute could
+ be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the maximum number of bytes that can be
+ requested with a READY TO TRANSFER UPIU. The full information
+ about the attribute could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file provides the reference clock frequency UFS device
+ attribute. The full information about the attribute could
+ be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether the configuration descriptor is locked.
+ The full information about the attribute could be found at
+ UFS specifications 2.1. The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_number_of_rtt
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file provides the maximum current number of
+ outstanding RTTs in device that is allowed. The full
+ information about the attribute could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file provides the exception event control UFS device
+ attribute. The full information about the attribute could
+ be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file provides the exception event status UFS device
+ attribute. The full information about the attribute could
+ be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file provides the ffu status UFS device attribute.
+ The full information about the attribute could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_state
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file show the PSA feature status. The full information
+ about the attribute could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the amount of data that the host plans to
+ load to all logical units in pre-soldering state.
+ The full information about the attribute could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+
+What: /sys/class/scsi_device/*/device/dyn_cap_needed
+Date: February 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the The amount of physical memory needed
+ to be removed from the physical memory resources pool of
+ the particular logical unit. The full information about
+ the attribute could be found at UFS specifications 2.1.
+ The file is read only.
+
+
+What: /sys/bus/platform/drivers/ufshcd/*/rpm_lvl
+Date: September 2014
+Contact: Subhash Jadavani <subhashj@codeaurora.org>
+Description: This entry could be used to set or show the UFS device
+ runtime power management level. The current driver
+ implementation supports 6 levels with next target states:
+ 0 - an UFS device will stay active, an UIC link will
+ stay active
+ 1 - an UFS device will stay active, an UIC link will
+ hibernate
+ 2 - an UFS device will moved to sleep, an UIC link will
+ stay active
+ 3 - an UFS device will moved to sleep, an UIC link will
+ hibernate
+ 4 - an UFS device will be powered off, an UIC link will
+ hibernate
+ 5 - an UFS device will be powered off, an UIC link will
+ be powered off
+
+What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state
+Date: February 2018
+Contact: Subhash Jadavani <subhashj@codeaurora.org>
+Description: This entry shows the target power mode of an UFS device
+ for the chosen runtime power management level.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state
+Date: February 2018
+Contact: Subhash Jadavani <subhashj@codeaurora.org>
+Description: This entry shows the target state of an UFS UIC link
+ for the chosen runtime power management level.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/spm_lvl
+Date: September 2014
+Contact: Subhash Jadavani <subhashj@codeaurora.org>
+Description: This entry could be used to set or show the UFS device
+ system power management level. The current driver
+ implementation supports 6 levels with next target states:
+ 0 - an UFS device will stay active, an UIC link will
+ stay active
+ 1 - an UFS device will stay active, an UIC link will
+ hibernate
+ 2 - an UFS device will moved to sleep, an UIC link will
+ stay active
+ 3 - an UFS device will moved to sleep, an UIC link will
+ hibernate
+ 4 - an UFS device will be powered off, an UIC link will
+ hibernate
+ 5 - an UFS device will be powered off, an UIC link will
+ be powered off
+
+What: /sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state
+Date: February 2018
+Contact: Subhash Jadavani <subhashj@codeaurora.org>
+Description: This entry shows the target power mode of an UFS device
+ for the chosen system power management level.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/spm_target_link_state
+Date: February 2018
+Contact: Subhash Jadavani <subhashj@codeaurora.org>
+Description: This entry shows the target state of an UFS UIC link
+ for the chosen system power management level.
+ The file is read only.
diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
index df3bef7998fa..8c6659ed2cfc 100644
--- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
+++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
@@ -53,6 +53,13 @@ Main node required properties:
Optional main node properties:
- hip06-sas-v2-quirk-amt : when set, indicates that the v2 controller has the
"am-max-transmissions" limitation.
+ - hisilicon,signal-attenuation : array of 3 32-bit values, containing de-emphasis,
+ preshoot, and boost attenuation readings for the board. They
+ are used to describe the signal attenuation of the board. These
+ values' range is 7600 to 12400, and used to represent -24dB to
+ 24dB.
+ The formula is "y = (x-10000)/10000". For example, 10478
+ means 4.78dB.
Example:
sas0: sas@c1000000 {
diff --git a/Documentation/driver-api/scsi.rst b/Documentation/driver-api/scsi.rst
index 3ae337929721..31ad0fed6763 100644
--- a/Documentation/driver-api/scsi.rst
+++ b/Documentation/driver-api/scsi.rst
@@ -154,12 +154,6 @@ lists).
.. kernel-doc:: drivers/scsi/scsi_lib_dma.c
:export:
-drivers/scsi/scsi_module.c
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The file drivers/scsi/scsi_module.c contains legacy support for
-old-style host templates. It should never be used by any new driver.
-
drivers/scsi/scsi_proc.c
~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/Documentation/scsi/ChangeLog.1992-1997 b/Documentation/scsi/ChangeLog.1992-1997
deleted file mode 100644
index 6faad7e6417c..000000000000
--- a/Documentation/scsi/ChangeLog.1992-1997
+++ /dev/null
@@ -1,2023 +0,0 @@
-Sat Jan 18 15:51:45 1997 Richard Henderson <rth@tamu.edu>
-
- * Don't play with usage_count directly, instead hand around
- the module header and use the module macros.
-
-Fri May 17 00:00:00 1996 Leonard N. Zubkoff <lnz@dandelion.com>
-
- * BusLogic Driver Version 2.0.3 Released.
-
-Tue Apr 16 21:00:00 1996 Leonard N. Zubkoff <lnz@dandelion.com>
-
- * BusLogic Driver Version 1.3.2 Released.
-
-Sun Dec 31 23:26:00 1995 Leonard N. Zubkoff <lnz@dandelion.com>
-
- * BusLogic Driver Version 1.3.1 Released.
-
-Fri Nov 10 15:29:49 1995 Leonard N. Zubkoff <lnz@dandelion.com>
-
- * Released new BusLogic driver.
-
-Wed Aug 9 22:37:04 1995 Andries Brouwer <aeb@cwi.nl>
-
- As a preparation for new device code, separated the various
- functions the request->dev field had into the device proper,
- request->rq_dev and a status field request->rq_status.
-
- The 2nd argument of bios_param is now a kdev_t.
-
-Wed Jul 19 10:43:15 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
-
- * scsi.c (scsi_proc_info): /proc/scsi/scsi now also lists all
- attached devices.
-
- * scsi_proc.c (proc_print_scsidevice): Added. Used by scsi.c and
- eata_dma_proc.c to produce some device info for /proc/scsi.
-
- * eata_dma.c (eata_queue)(eata_int_handler)(eata_scsi_done):
- Changed handling of internal SCSI commands send to the HBA.
-
-
-Wed Jul 19 10:09:17 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
-
- * Linux 1.3.11 released.
-
- * eata_dma.c (eata_queue)(eata_int_handler): Added code to do
- command latency measurements if requested by root through
- /proc/scsi interface.
- Throughout Use HZ constant for time references.
-
- * eata_pio.c: Use HZ constant for time references.
-
- * aic7xxx.c, aic7xxx.h, aic7xxx_asm.c: Changed copyright from BSD
- to GNU style.
-
- * scsi.h: Added READ_12 command opcode constant
-
-Wed Jul 19 09:25:30 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
-
- * Linux 1.3.10 released.
-
- * scsi_proc.c (dispatch_scsi_info): Removed unused variable.
-
-Wed Jul 19 09:25:30 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
-
- * Linux 1.3.9 released.
-
- * scsi.c Blacklist concept expanded to 'support' more device
- deficiencies. blacklist[] renamed to device_list[]
- (scan_scsis): Code cleanup.
-
- * scsi_debug.c (scsi_debug_proc_info): Added support to control
- device lockup simulation via /proc/scsi interface.
-
-
-Wed Jul 19 09:22:34 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
-
- * Linux 1.3.7 released.
-
- * scsi_proc.c: Fixed a number of bugs in directory handling
-
-Wed Jul 19 09:18:28 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
-
- * Linux 1.3.5 released.
-
- * Native wide, multichannel and /proc/scsi support now in official
- kernel distribution.
-
- * scsi.c/h, hosts.c/h et al reindented to increase readability
- (especially on 80 column wide terminals).
-
- * scsi.c, scsi_proc.c, ../../fs/proc/inode.c: Added
- /proc/scsi/scsi which allows root to scan for hotplugged devices.
-
- * scsi.c (scsi_proc_info): Added, to support /proc/scsi/scsi.
- (scan_scsis): Added some 'spaghetti' code to allow scanning for
- single devices.
-
-
-Thu Jun 20 15:20:27 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
-
- * proc.c: Renamed to scsi_proc.c
-
-Mon Jun 12 20:32:45 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
-
- * Linux 1.3.0 released.
-
-Mon May 15 19:33:14 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
-
- * scsi.c: Added native multichannel and wide scsi support.
-
- * proc.c (dispatch_scsi_info) (build_proc_dir_hba_entries):
- Updated /proc/scsi interface.
-
-Thu May 4 17:58:48 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
-
- * sd.c (requeue_sd_request): Zero out the scatterlist only if
- scsi_malloc returned memory for it.
-
- * eata_dma.c (register_HBA) (eata_queue): Add support for
- large scatter/gather tables and set use_clustering accordingly
-
- * hosts.c: Make use_clustering changeable in the Scsi_Host structure.
-
-Wed Apr 12 15:25:52 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.2.5 released.
-
- * buslogic.c: Update to version 1.15 (From Leonard N. Zubkoff).
- Fixed interrupt routine to avoid races when handling multiple
- complete commands per interrupt. Seems to come up with faster
- cards.
-
- * eata_dma.c: Update to 2.3.5r. Modularize. Improved error handling
- throughout and fixed bug interrupt routine which resulted in shifted
- status bytes. Added blink LED state checks for ISA and EISA HBAs.
- Memory management bug seems to have disappeared ==> increasing
- C_P_L_CURRENT_MAX to 16 for now. Decreasing C_P_L_DIV to 3 for
- performance reasons.
-
- * scsi.c: If we get a FMK, EOM, or ILI when attempting to scan
- the bus, assume that it was just noise on the bus, and ignore
- the device.
-
- * scsi.h: Update and add a bunch of missing commands which we
- were never using.
-
- * sd.c: Use restore_flags in do_sd_request - this may result in
- latency conditions, but it gets rid of races and crashes.
- Do not save flags again when searching for a second command to
- queue.
-
- * st.c: Use bytes, not STP->buffer->buffer_size when reading
- from tape.
-
-
-Tue Apr 4 09:42:08 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.2.4 released.
-
- * st.c: Fix typo - restoring wrong flags.
-
-Wed Mar 29 06:55:12 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.2.3 released.
-
- * st.c: Perform some waiting operations with interrupts off.
- Is this correct???
-
-Wed Mar 22 10:34:26 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.2.2 released.
-
- * aha152x.c: Modularize. Add support for PCMCIA.
-
- * eata.c: Update to version 2.0. Fixed bug preventing media
- detection. If scsi_register_host returns NULL, fail gracefully.
-
- * scsi.c: Detect as NEC (for photo-cd purposes) for the 84
- and 25 models as "NEC_OLDCDR".
-
- * scsi.h: Add define for NEC_OLDCDR
-
- * sr.c: Add handling for NEC_OLDCDR. Treat as unknown.
-
- * u14-34f.c: Update to version 2.0. Fixed same bug as in
- eata.c.
-
-
-Mon Mar 6 11:11:20 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.2.0 released. Yeah!!!
-
- * Minor spelling/punctuation changes throughout. Nothing
- substantive.
-
-Mon Feb 20 21:33:03 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.95 released.
-
- * qlogic.c: Update to version 0.41.
-
- * seagate.c: Change some message to be more descriptive about what
- we detected.
-
- * sr.c: spelling/whitespace changes.
-
-Mon Feb 20 21:33:03 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.94 released.
-
-Mon Feb 20 08:57:17 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.93 released.
-
- * hosts.h: Change io_port to long int from short.
-
- * 53c7,8xx.c: crash on AEN fixed, SCSI reset is no longer a NOP,
- NULL pointer panic on odd UDCs fixed, two bugs in diagnostic output
- fixed, should initialize correctly if left running, now loadable,
- new memory allocation, extraneous diagnostic output suppressed,
- splx() replaced with save/restore flags. [ Drew ]
-
- * hosts.c, hosts.h, scsi_ioctl.c, sd.c, sd_ioctl.c, sg.c, sr.c,
- sr_ioctl.c: Add special junk at end that Emacs will use for
- formatting the file.
-
- * qlogic.c: Update to v0.40a. Improve parity handling.
-
- * scsi.c: Add Hitachi DK312C to blacklist. Change "};" to "}" in
- many places. Use scsi_init_malloc to get command block - may
- need this to be dma compatible for some host adapters.
- Restore interrupts after unregistering a host.
-
- * sd.c: Use sti instead of restore flags - causes latency problems.
-
- * seagate.c: Use controller_type to determine string used when
- registering irq.
-
- * sr.c: More photo-cd hacks to make sure we get the xa stuff right.
- * sr.h, sr.c: Change is_xa to xa_flags field.
-
- * st.c: Disable retries for write operations.
-
-Wed Feb 15 10:52:56 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.92 released.
-
- * eata.c: Update to 1.17.
-
- * eata_dma.c: Update to 2.31a. Add more support for /proc/scsi.
- Continuing modularization. Less crashes because of the bug in the
- memory management ==> increase C_P_L_CURRENT_MAX to 10
- and decrease C_P_L_DIV to 4.
-
- * hosts.c: If we remove last host registered, reuse host number.
- When freeing memory from host being deregistered, free extra_bytes
- too.
-
- * scsi.c (scan_scsis): memset(SDpnt, 0) and set SCmd.device to SDpnt.
- Change memory allocation to work around bugs in __get_dma_pages.
- Do not free host if usage count is not zero (for modules).
-
- * sr_ioctl.c: Increase IOCTL_TIMEOUT to 3000.
-
- * st.c: Allow for ST_EXTRA_DEVS in st data structures.
-
- * u14-34f.c: Update to 1.17.
-
-Thu Feb 9 10:11:16 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.91 released.
-
- * eata.c: Update to 1.16. Use wish_block instead of host->block.
-
- * hosts.c: Initialize wish_block to 0.
-
- * hosts.h: Add wish_block.
-
- * scsi.c: Use wish_block as indicator that the host should be added
- to block list.
-
- * sg.c: Add SG_EXTRA_DEVS to number of slots.
-
- * u14-34f.c: Use wish_block.
-
-Tue Feb 7 11:46:04 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.90 released.
-
- * eata.c: Change naming from eata_* to eata2x_*. Now at vers 1.15.
- Update interrupt handler to take pt_regs as arg. Allow blocking
- even if loaded as module. Initialize target_time_out array.
- Do not put sti(); in timing loop.
-
- * hosts.c: Do not reuse host numbers.
- Use scsi_make_blocked_list to generate blocking list.
-
- * script_asm.pl: Beats me. Don't know perl. Something to do with
- phase index.
-
- * scsi.c (scsi_make_blocked_list): New function - code copied from
- hosts.c.
-
- * scsi.c: Update code to disable photo CD for Toshiba cdroms.
- Use just manufacturer name, not model number.
-
- * sr.c: Fix setting density for Toshiba drives.
-
- * u14-34f.c: Clear target_time_out array during reset.
-
-Wed Feb 1 09:20:45 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.89 released.
-
- * Makefile, u14-34f.c: Modularize.
-
- * Makefile, eata.c: Modularize. Now version 1.14
-
- * NCR5380.c: Update interrupt handler with new arglist. Minor
- cleanups.
-
- * eata_dma.c: Begin to modularize. Add hooks for /proc/scsi.
- New version 2.3.0a. Add code in interrupt handler to allow
- certain CDROM drivers to be detected which return a
- CHECK_CONDITION during SCSI bus scan. Add opcode check to get
- all DATA IN and DATA OUT phases right. Utilize HBA_interpret flag.
- Improvements in HBA identification. Various other minor stuff.
-
- * hosts.c: Initialize ->dma_channel and ->io_port when registering
- a new host.
-
- * qlogic.c: Modularize and add PCMCIA support.
-
- * scsi.c: Add Hitachi to blacklist.
-
- * scsi.c: Change default to no lun scan (too many problem devices).
-
- * scsi.h: Define QUEUE_FULL condition.
-
- * sd.c: Do not check for non-existent partition until after
- new media check.
-
- * sg.c: Undo previous change which was wrong.
-
- * sr_ioctl.c: Increase IOCTL_TIMEOUT to 2000.
-
- * st.c: Patches from Kai - improve filemark handling.
-
-Tue Jan 31 17:32:12 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.88 released.
-
- * Throughout - spelling/grammar fixups.
-
- * scsi.c: Make sure that all buffers are 16 byte aligned - some
- drivers (buslogic) need this.
-
- * scsi.c (scan_scsis): Remove message printed.
-
- * scsi.c (scsi_init): Move message here.
-
-Mon Jan 30 06:40:25 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.87 released.
-
- * sr.c: Photo-cd related changes. (Gerd Knorr??).
-
- * st.c: Changes from Kai related to EOM detection.
-
-Mon Jan 23 23:53:10 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.86 released.
-
- * 53c7,8xx.h: Change SG size to 127.
-
- * eata_dma: Update to version 2.10i. Remove bug in the registration
- of multiple HBAs and channels. Minor other improvements and stylistic
- changes.
-
- * scsi.c: Test for Toshiba XM-3401TA and exclude from detection
- as toshiba drive - photo cd does not work with this drive.
-
- * sr.c: Update photocd code.
-
-Mon Jan 23 23:53:10 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.85 released.
-
- * st.c, st_ioctl.c, sg.c, sd_ioctl.c, scsi_ioctl.c, hosts.c:
- include linux/mm.h
-
- * qlogic.c, buslogic.c, aha1542.c: Include linux/module.h.
-
-Sun Jan 22 22:08:46 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.84 released.
-
- * Makefile: Support for loadable QLOGIC boards.
-
- * aha152x.c: Update to version 1.8 from Juergen.
-
- * eata_dma.c: Update from Michael Neuffer.
- Remove hard limit of 2 commands per lun and make it better
- configurable. Improvements in HBA identification.
-
- * in2000.c: Fix biosparam to support large disks.
-
- * qlogic.c: Minor changes (change sti -> restore_flags).
-
-Wed Jan 18 23:33:09 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.83 released.
-
- * aha1542.c(aha1542_intr_handle): Use arguments handed down to find
- which irq.
-
- * buslogic.c: Likewise.
-
- * eata_dma.c: Use min of 2 cmd_per_lun for OCS_enabled boards.
-
- * scsi.c: Make RECOVERED_ERROR a SUGGEST_IS_OK.
-
- * sd.c: Fail if we are opening a non-existent partition.
-
- * sr.c: Bump SR_TIMEOUT to 15000.
- Do not probe for media size at boot time(hard on changers).
- Flag device as needing sector size instead.
-
- * sr_ioctl.c: Remove CDROMMULTISESSION_SYS ioctl.
-
- * ultrastor.c: Fix bug in call to ultrastor_interrupt (wrong #args).
-
-Mon Jan 16 07:18:23 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.82 released.
-
- Throughout.
- - Change all interrupt handlers to accept new calling convention.
- In particular, we now receive the irq number as one of the arguments.
-
- * More minor spelling corrections in some of the new files.
-
- * aha1542.c, buslogic.c: Clean up interrupt handler a little now
- that we receive the irq as an arg.
-
- * aha274x.c: s/snarf_region/request_region/
-
- * eata.c: Update to version 1.12. Fix some comments and display a
- message if we cannot reserve the port addresses.
-
- * u14-34f.c: Update to version 1.13. Fix some comments and display a
- message if we cannot reserve the port addresses.
-
- * eata_dma.c: Define get_board_data function (send INQUIRY command).
- Use to improve detection of variants of different DPT boards. Change
- version subnumber to "0g".
-
- * fdomain.c: Update to version 5.26. Improve detection of some boards
- repackaged by IBM.
-
- * scsi.c (scsi_register_host): Change "name" to const char *.
-
- * sr.c: Fix problem in set mode command for Toshiba drives.
-
- * sr.c: Fix typo from patch 81.
-
-Fri Jan 13 12:54:46 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.81 released. Codefreeze for 1.2 release announced.
-
- Big changes here.
-
- * eata_dma.*: New files from Michael Neuffer.
- (neuffer@goofy.zdv.uni-mainz.de). Should support
- all eata/dpt cards.
-
- * hosts.c, Makefile: Add eata_dma.
-
- * README.st: Document MTEOM.
-
- Patches from me (ERY) to finish support for low-level loadable scsi.
- It now works, and is actually useful.
-
- * Throughout - add new argument to scsi_init_malloc that takes an
- additional parameter. This is used as a priority to kmalloc,
- and you can specify the GFP_DMA flag if you need DMA-able memory.
-
- * Makefile: For source files that are loadable, always add name
- to SCSI_SRCS. Fill in modules: target.
-
- * hosts.c: Change next_host to next_scsi_host, and make global.
- Print hosts after we have identified all of them. Use info()
- function if present, otherwise use name field.
-
- * hosts.h: Change attach function to return int, not void.
- Define number of device slots to allow for loadable devices.
- Define tags to tell scsi module code what type of module we
- are loading.
-
- * scsi.c: Fix scan_scsis so that it can be run by a user process.
- Do not use waiting loops - use up and down mechanism as long
- as current != task[0].
-
- * scsi.c(scan_scsis): Do not use stack variables for I/O - this
- could be > 16Mb if we are loading a module at runtime (i.e. use
- scsi_init_malloc to get some memory we know will be safe).
-
- * scsi.c: Change dma freelist to be a set of pages. This allows
- us to dynamically adjust the size of the list by adding more pages
- to the pagelist. Fix scsi_malloc and scsi_free accordingly.
-
- * scsi_module.c: Fix include.
-
- * sd.c: Declare detach function. Increment/decrement module usage
- count as required. Fix init functions to allow loaded devices.
- Revalidate all new disks so we get the partition tables. Define
- detach function.
-
- * sr.c: Likewise.
-
- * sg.c: Declare detach function. Allow attachment of devices on
- loaded drivers.
-
- * st.c: Declare detach function. Increment/decrement module usage
- count as required.
-
-Tue Jan 10 10:09:58 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.79 released.
-
- Patch from some undetermined individual who needs to get a life :-).
-
- * sr.c: Attacked by spelling bee...
-
- Patches from Gerd Knorr:
-
- * sr.c: make printk messages for photoCD a little more informative.
-
- * sr_ioctl.c: Fix CDROMMULTISESSION_SYS ioctl.
-
-Mon Jan 9 10:01:37 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.78 released.
-
- * Makefile: Add empty modules: target.
-
- * Wheee. Now change register_iomem to request_region.
-
- * in2000.c: Bugfix - apparently this is the fix that we have
- all been waiting for. It fixes a problem whereby the driver
- is not stable under heavy load. Race condition and all that.
- Patch from Peter Lu.
-
-Wed Jan 4 21:17:40 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.77 released.
-
- * 53c7,8xx.c: Fix from Linus - emulate splx.
-
- Throughout:
-
- Change "snarf_region" with "register_iomem".
-
- * scsi_module.c: New file. Contains support for low-level loadable
- scsi drivers. [ERY].
-
- * sd.c: More s/int/long/ changes.
-
- * seagate.c: Explicitly include linux/config.h
-
- * sg.c: Increment/decrement module usage count on open/close.
-
- * sg.c: Be a bit more careful about the user not supplying enough
- information for a valid command. Pass correct size down to
- scsi_do_cmd.
-
- * sr.c: More changes for Photo-CD. This apparently breaks NEC drives.
-
- * sr_ioctl.c: Support CDROMMULTISESSION ioctl.
-
-
-Sun Jan 1 19:55:21 1995 Eric Youngdale (eric@andante)
-
- * Linux 1.1.76 released.
-
- * constants.c: Add type cast in switch statement.
-
- * scsi.c (scsi_free): Change datatype of "offset" to long.
- (scsi_malloc): Change a few more variables to long. Who
- did this and why was it important? 64 bit machines?
-
-
- Lots of changes to use save_state/restore_state instead of cli/sti.
- Files changed include:
-
- * aha1542.c:
- * aha1740.c:
- * buslogic.c:
- * in2000.c:
- * scsi.c:
- * scsi_debug.c:
- * sd.c:
- * sr.c:
- * st.c:
-
-Wed Dec 28 16:38:29 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.75 released.
-
- * buslogic.c: Spelling fix.
-
- * scsi.c: Add HP C1790A and C2500A scanjet to blacklist.
-
- * scsi.c: Spelling fixup.
-
- * sd.c: Add support for sd_hardsizes (hard sector sizes).
-
- * ultrastor.c: Use save_flags/restore_flags instead of cli/sti.
-
-Fri Dec 23 13:36:25 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.74 released.
-
- * README.st: Update from Kai Makisara.
-
- * eata.c: New version from Dario - version 1.11.
- use scsicam bios_param routine. Add support for 2011
- and 2021 boards.
-
- * hosts.c: Add support for blocking. Linked list automatically
- generated when shpnt->block is set.
-
- * scsi.c: Add sankyo & HP scanjet to blacklist. Add support for
- kicking things loose when we deadlock.
-
- * scsi.c: Recognize scanners and processors in scan_scsis.
-
- * scsi_ioctl.h: Increase timeout to 9 seconds.
-
- * st.c: New version from Kai - add better support for backspace.
-
- * u14-34f.c: New version from Dario. Supports blocking.
-
-Wed Dec 14 14:46:30 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.73 released.
-
- * buslogic.c: Update from Dave Gentzel. Version 1.14.
- Add module related stuff. More fault tolerant if out of
- DMA memory.
-
- * fdomain.c: New version from Rik Faith - version 5.22. Add support
- for ISA-200S SCSI adapter.
-
- * hosts.c: Spelling.
-
- * qlogic.c: Update to version 0.38a. Add more support for PCMCIA.
-
- * scsi.c: Mask device type with 0x1f during scan_scsis.
- Add support for deadlocking, err, make that getting out of
- deadlock situations that are created when we allow the user
- to limit requests to one host adapter at a time.
-
- * scsi.c: Bugfix - pass pid, not SCpnt as second arg to
- scsi_times_out.
-
- * scsi.c: Restore interrupt state to previous value instead of using
- cli/sti pairs.
-
- * scsi.c: Add a bunch of module stuff (all commented out for now).
-
- * scsi.c: Clean up scsi_dump_status.
-
-Tue Dec 6 12:34:20 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.72 released.
-
- * sg.c: Bugfix - always use sg_free, since we might have big buff.
-
-Fri Dec 2 11:24:53 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.71 released.
-
- * sg.c: Clear buff field when not in use. Only call scsi_free if
- non-null.
-
- * scsi.h: Call wake_up(&wait_for_request) when done with a
- command.
-
- * scsi.c (scsi_times_out): Pass pid down so that we can protect
- against race conditions.
-
- * scsi.c (scsi_abort): Zero timeout field if we get the
- NOT_RUNNING message back from low-level driver.
-
-
- * scsi.c (scsi_done): Restore cmd_len, use_sg here.
-
- * scsi.c (request_sense): Not here.
-
- * hosts.h: Add new forbidden_addr, forbidden_size fields. Who
- added these and why????
-
- * hosts.c (scsi_mem_init): Mark pages as reserved if they fall in
- the forbidden regions. I am not sure - I think this is so that
- we can deal with boards that do incomplete decoding of their
- address lines for the bios chips, but I am not entirely sure.
-
- * buslogic.c: Set forbidden_addr stuff if using a buggy board.
-
- * aha1740.c: Test for NULL pointer in SCtmp. This should not
- occur, but a nice message is better than a kernel segfault.
-
- * 53c7,8xx.c: Add new PCI chip ID for 815.
-
-Fri Dec 2 11:24:53 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.70 released.
-
- * ChangeLog, st.c: Spelling.
-
-Tue Nov 29 18:48:42 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.69 released.
-
- * u14-34f.h: Non-functional change. [Dario].
-
- * u14-34f.c: Use block field in Scsi_Host to prevent commands from
- being queued to more than one host at the same time (used when
- motherboard does not deal with multiple bus-masters very well).
- Only when SINGLE_HOST_OPERATIONS is defined.
- Use new cmd_per_lun field. [Dario]
-
- * eata.c: Likewise.
-
- * st.c: More changes from Kai. Add ready flag to indicate drive
- status.
-
- * README.st: Document this.
-
- * sr.c: Bugfix (do not subtract CD_BLOCK_OFFSET) for photo-cd
- code.
-
- * sg.c: Bugfix - fix problem where opcode is not correctly set up.
-
- * seagate.[c,h]: Use #defines to set driver name.
-
- * scsi_ioctl.c: Zero buffer before executing command.
-
- * scsi.c: Use new cmd_per_lun field in Scsi_Hosts as appropriate.
- Add Sony CDU55S to blacklist.
-
- * hosts.h: Add new cmd_per_lun field to Scsi_Hosts.
-
- * hosts.c: Initialize cmd_per_lun in Scsi_Hosts from template.
-
- * buslogic.c: Use cmd_per_lun field - initialize to different
- values depending upon bus type (i.e. use 1 if ISA, so we do not
- hog memory). Use other patches which got lost from 1.1.68.
-
- * aha1542.c: Spelling.
-
-Tue Nov 29 15:43:50 1994 Eric Youngdale (eric@andante.aib.com)
-
- * Linux 1.1.68 released.
-
- Add support for 12 byte vendor specific commands in scsi-generics,
- more (i.e. the last mandatory) low-level changes to support
- loadable modules, plus a few other changes people have requested
- lately. Changes by me (ERY) unless otherwise noted. Spelling
- changes appear from some unknown corner of the universe.
-
- * Throughout: Change COMMAND_SIZE() to use SCpnt->cmd_len.
-
- * Throughout: Change info() low level function to take a Scsi_Host
- pointer. This way the info function can return specific
- information about the host in question, if desired.
-
- * All low-level drivers: Add NULL in initializer for the
- usage_count field added to Scsi_Host_Template.
-
- * aha152x.[c,h]: Remove redundant info() function.
-
- * aha1542.[c,h]: Likewise.
-
- * aha1740.[c,h]: Likewise.
-
- * aha274x.[c,h]: Likewise.
-
- * eata.[c,h]: Likewise.
-
- * pas16.[c,h]: Likewise.
-
- * scsi_debug.[c,h]: Likewise.
-
- * t128.[c,h]: Likewise.
-
- * u14-34f.[c,h]: Likewise.
-
- * ultrastor.[c,h]: Likewise.
-
- * wd7000.[c,h]: Likewise.
-
- * aha1542.c: Add support for command line options with lilo to set
- DMA parameters, I/O port. From Matt Aarnio.
-
- * buslogic.[c,h]: New version (1.13) from Dave Gentzel.
-
- * hosts.h: Add new field to Scsi_Hosts "block" to allow blocking
- all I/O to certain other cards. Helps prevent problems with some
- ISA motherboards.
-
- * hosts.h: Add usage_count to Scsi_Host_Template.
-
- * hosts.h: Add n_io_port to Scsi_Host (used when releasing module).
-
- * hosts.c: Initialize block field.
-
- * in2000.c: Remove "static" declarations from exported functions.
-
- * in2000.h: Likewise.
-
- * scsi.c: Correctly set cmd_len field as required. Save and
- change setting when doing a request_sense, restore when done.
- Move abort timeout message. Fix panic in request_queueable to
- print correct function name.
-
- * scsi.c: When incrementing usage count, walk block linked list
- for host, and or in SCSI_HOST_BLOCK bit. When decrementing usage
- count to 0, clear this bit to allow usage to continue, wake up
- processes waiting.
-
-
- * scsi_ioctl.c: If we have an info() function, call it, otherwise
- if we have a "name" field, use it, else do nothing.
-
- * sd.c, sr.c: Clear cmd_len field prior to each command we
- generate.
-
- * sd.h: Add "has_part_table" bit to rscsi_disks.
-
- * sg.[c,h]: Add support for vendor specific 12 byte commands (i.e.
- override command length in COMMAND_SIZE).
-
- * sr.c: Bugfix from Gerd in photocd code.
-
- * sr.c: Bugfix in get_sectorsize - always use scsi_malloc buffer -
- we cannot guarantee that the stack is < 16Mb.
-
-Tue Nov 22 15:40:46 1994 Eric Youngdale (eric@andante.aib.com)
-
- * Linux 1.1.67 released.
-
- * sr.c: Change spelling of manufactor to manufacturer.
-
- * scsi.h: Likewise.
-
- * scsi.c: Likewise.
-
- * qlogic.c: Spelling corrections.
-
- * in2000.h: Spelling corrections.
-
- * in2000.c: Update from Bill Earnest, change from
- jshiffle@netcom.com. Support new bios versions.
-
- * README.qlogic: Spelling correction.
-
-Tue Nov 22 15:40:46 1994 Eric Youngdale (eric@andante.aib.com)
-
- * Linux 1.1.66 released.
-
- * u14-34f.c: Spelling corrections.
-
- * sr.[h,c]: Add support for multi-session CDs from Gerd Knorr.
-
- * scsi.h: Add manufactor field for keeping track of device
- manufacturer.
-
- * scsi.c: More spelling corrections.
-
- * qlogic.h, qlogic.c, README.qlogic: New driver from Tom Zerucha.
-
- * in2000.c, in2000.h: New driver from Brad McLean/Bill Earnest.
-
- * fdomain.c: Spelling correction.
-
- * eata.c: Spelling correction.
-
-Fri Nov 18 15:22:44 1994 Eric Youngdale (eric@andante.aib.com)
-
- * Linux 1.1.65 released.
-
- * eata.h: Update version string to 1.08.00.
-
- * eata.c: Set sg_tablesize correctly for DPT PM2012 boards.
-
- * aha274x.seq: Spell checking.
-
- * README.st: Likewise.
-
- * README.aha274x: Likewise.
-
- * ChangeLog: Likewise.
-
-Tue Nov 15 15:35:08 1994 Eric Youngdale (eric@andante.aib.com)
-
- * Linux 1.1.64 released.
-
- * u14-34f.h: Update version number to 1.10.01.
-
- * u14-34f.c: Use Scsi_Host can_queue variable instead of one from template.
-
- * eata.[c,h]: New driver for DPT boards from Dario Ballabio.
-
- * buslogic.c: Use can_queue field.
-
-Wed Nov 30 12:09:09 1994 Eric Youngdale (eric@andante.aib.com)
-
- * Linux 1.1.63 released.
-
- * sd.c: Give I/O error if we attempt 512 byte I/O to a disk with
- 1024 byte sectors.
-
- * scsicam.c: Make sure we do read from whole disk (mask off
- partition).
-
- * scsi.c: Use can_queue in Scsi_Host structure.
- Fix panic message about invalid host.
-
- * hosts.c: Initialize can_queue from template.
-
- * hosts.h: Add can_queue to Scsi_Host structure.
-
- * aha1740.c: Print out warning about NULL ecbptr.
-
-Fri Nov 4 12:40:30 1994 Eric Youngdale (eric@andante.aib.com)
-
- * Linux 1.1.62 released.
-
- * fdomain.c: Update to version 5.20. (From Rik Faith). Support
- BIOS version 3.5.
-
- * st.h: Add ST_EOD symbol.
-
- * st.c: Patches from Kai Makisara - support additional densities,
- add support for MTFSS, MTBSS, MTWSM commands.
-
- * README.st: Update to document new commands.
-
- * scsi.c: Add Mediavision CDR-H93MV to blacklist.
-
-Sat Oct 29 20:57:36 1994 Eric Youngdale (eric@andante.aib.com)
-
- * Linux 1.1.60 released.
-
- * u14-34f.[c,h]: New driver from Dario Ballabio.
-
- * aic7770.c, aha274x_seq.h, aha274x.seq, aha274x.h, aha274x.c,
- README.aha274x: New files, new driver from John Aycock.
-
-
-Tue Oct 11 08:47:39 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.54 released.
-
- * Add third PCI chip id. [Drew]
-
- * buslogic.c: Set BUSLOGIC_CMDLUN back to 1 [Eric].
-
- * ultrastor.c: Fix asm directives for new GCC.
-
- * sr.c, sd.c: Use new end_scsi_request function.
-
- * scsi.h(end_scsi_request): Return pointer to block if still
- active, else return NULL if inactive. Fixes race condition.
-
-Sun Oct 9 20:23:14 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.53 released.
-
- * scsi.c: Do not allocate dma bounce buffers if we have exactly
- 16Mb.
-
-Fri Sep 9 05:35:30 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.51 released.
-
- * aha152x.c: Add support for disabling the parity check. Update
- to version 1.4. [Juergen].
-
- * seagate.c: Tweak debugging message.
-
-Wed Aug 31 10:15:55 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.50 released.
-
- * aha152x.c: Add eb800 for Vtech Platinum SMP boards. [Juergen].
-
- * scsi.c: Add Quantum PD1225S to blacklist.
-
-Fri Aug 26 09:38:45 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.49 released.
-
- * sd.c: Fix bug when we were deleting the wrong entry if we
- get an unsupported sector size device.
-
- * sr.c: Another spelling patch.
-
-Thu Aug 25 09:15:27 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.48 released.
-
- * Throughout: Use new semantics for request_dma, as appropriate.
-
- * sr.c: Print correct device number.
-
-Sun Aug 21 17:49:23 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.47 released.
-
- * NCR5380.c: Add support for LIMIT_TRANSFERSIZE.
-
- * constants.h: Add prototype for print_Scsi_Cmnd.
-
- * pas16.c: Some more minor tweaks. Test for Mediavision board.
- Allow for disks > 1Gb. [Drew??]
-
- * sr.c: Set SCpnt->transfersize.
-
-Tue Aug 16 17:29:35 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.46 released.
-
- * Throughout: More spelling fixups.
-
- * buslogic.c: Add a few more fixups from Dave. Disk translation
- mainly.
-
- * pas16.c: Add a few patches (Drew?).
-
-
-Thu Aug 11 20:45:15 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.44 released.
-
- * hosts.c: Add type casts for scsi_init_malloc.
-
- * scsicam.c: Add type cast.
-
-Wed Aug 10 19:23:01 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.43 released.
-
- * Throughout: Spelling cleanups. [??]
-
- * aha152x.c, NCR53*.c, fdomain.c, g_NCR5380.c, pas16.c, seagate.c,
- t128.c: Use request_irq, not irqaction. [??]
-
- * aha1542.c: Move test for shost before we start to use shost.
-
- * aha1542.c, aha1740.c, ultrastor.c, wd7000.c: Use new
- calling sequence for request_irq.
-
- * buslogic.c: Update from Dave Gentzel.
-
-Tue Aug 9 09:32:59 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.42 released.
-
- * NCR5380.c: Change NCR5380_print_status to static.
-
- * seagate.c: A few more bugfixes. Only Drew knows what they are
- for.
-
- * ultrastor.c: Tweak some __asm__ directives so that it works
- with newer compilers. [??]
-
-Sat Aug 6 21:29:36 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.40 released.
-
- * NCR5380.c: Return SCSI_RESET_WAKEUP from reset function.
-
- * aha1542.c: Reset mailbox status after a bus device reset.
-
- * constants.c: Fix typo (;;).
-
- * g_NCR5380.c:
- * pas16.c: Correct usage of NCR5380_init.
-
- * scsi.c: Remove redundant (and unused variables).
-
- * sd.c: Use memset to clear all of rscsi_disks before we use it.
-
- * sg.c: Ditto, except for scsi_generics.
-
- * sr.c: Ditto, except for scsi_CDs.
-
- * st.c: Initialize STp->device.
-
- * seagate.c: Fix bug. [Drew]
-
-Thu Aug 4 08:47:27 1994 Eric Youngdale (eric@andante)
-
- * Linux 1.1.39 released.
-
- * Makefile: Fix typo in NCR53C7xx.
-
- * st.c: Print correct number for device.
-
-Tue Aug 2 11:29:14 1994 Eric Youngdale (eric@esp22)
-
- * Linux 1.1.38 released.
-
- Lots of changes in 1.1.38. All from Drew unless otherwise noted.
-
- * 53c7,8xx.c: New file from Drew. PCI driver.
-
- * 53c7,8xx.h: Likewise.
-
- * 53c7,8xx.scr: Likewise.
-
- * 53c8xx_d.h, 53c8xx_u.h, script_asm.pl: Likewise.
-
- * scsicam.c: New file from Drew. Read block 0 on the disk and
- read the partition table. Attempt to deduce the geometry from
- the partition table if possible. Only used by 53c[7,8]xx right
- now, but could be used by any device for which we have no way
- of identifying the geometry.
-
- * sd.c: Use device letters instead of sd%d in a lot of messages.
-
- * seagate.c: Fix bug that resulted in lockups with some devices.
-
- * sr.c (sr_open): Return -EROFS, not -EACCES if we attempt to open
- device for write.
-
- * hosts.c, Makefile: Update for new driver.
-
- * NCR5380.c, NCR5380.h, g_NCR5380.h: Update from Drew to support
- 53C400 chip.
-
- * constants.c: Define CONST_CMND and CONST_MSG. Other minor
- cleanups along the way. Improve handling of CONST_MSG.
-
- * fdomain.c, fdomain.h: New version from Rik Faith. Update to
- 5.18. Should now support TMC-3260 PCI card with 18C30 chip.
-
- * pas16.c: Update with new irq initialization.
-
- * t128.c: Update with minor cleanups.
-
- * scsi.c (scsi_pid): New variable - gives each command a unique
- id. Add Quantum LPS5235S to blacklist. Change in_scan to
- in_scan_scsis and make global.
-
- * scsi.h: Add some defines for extended message handling,
- INITIATE/RELEASE_RECOVERY. Add a few new fields to support sync
- transfers.
-
- * scsi_ioctl.h: Add ioctl to request synchronous transfers.
-
-
-Tue Jul 26 21:36:58 1994 Eric Youngdale (eric@esp22)
-
- * Linux 1.1.37 released.
-
- * aha1542.c: Always call aha1542_mbenable, use new udelay
- mechanism so we do not wait a long time if the board does not
- implement this command.
-
- * g_NCR5380.c: Remove #include <linux/config.h> and #if
- defined(CONFIG_SCSI_*).
-
- * seagate.c: Likewise.
-
- Next round of changes to support loadable modules. Getting closer
- now, still not possible to do anything remotely usable.
-
- hosts.c: Create a linked list of detected high level devices.
- (scsi_register_device): New function to insert into this list.
- (scsi_init): Call scsi_register_device for each of the known high
- level drivers.
-
- hosts.h: Add prototype for linked list header. Add structure
- definition for device template structure which defines the linked
- list.
-
- scsi.c: (scan_scsis): Use linked list instead of knowledge about
- existing high level device drivers.
- (scsi_dev_init): Use init functions for drivers on linked list
- instead of explicit list to initialize and attach devices to high
- level drivers.
-
- scsi.h: Add new field "attached" to scsi_device - count of number
- of high level devices attached.
-
- sd.c, sr.c, sg.c, st.c: Adjust init/attach functions to use new
- scheme.
-
-Sat Jul 23 13:03:17 1994 Eric Youngdale (eric@esp22)
-
- * Linux 1.1.35 released.
-
- * ultrastor.c: Change constraint on asm() operand so that it works
- with gcc 2.6.0.
-
-Thu Jul 21 10:37:39 1994 Eric Youngdale (eric@esp22)
-
- * Linux 1.1.33 released.
-
- * sr.c(sr_open): Do not allow opens with write access.
-
-Mon Jul 18 09:51:22 1994 Eric Youngdale (eric@esp22)
-
- * Linux 1.1.31 released.
-
- * sd.c: Increase SD_TIMEOUT from 300 to 600.
-
- * sr.c: Remove stray task_struct* variable that was no longer
- used.
-
- * sr_ioctl.c: Fix typo in up() call.
-
-Sun Jul 17 16:25:29 1994 Eric Youngdale (eric@esp22)
-
- * Linux 1.1.30 released.
-
- * scsi.c (scan_scsis): Fix detection of some Toshiba CDROM drives
- that report themselves as disk drives.
-
- * (Throughout): Use request.sem instead of request.waiting.
- Should fix swap problem with fdomain.
-
-Thu Jul 14 10:51:42 1994 Eric Youngdale (eric@esp22)
-
- * Linux 1.1.29 released.
-
- * scsi.c (scan_scsis): Add new devices to end of linked list, not
- to the beginning.
-
- * scsi.h (SCSI_SLEEP): Remove brain dead hack to try to save
- the task state before sleeping.
-
-Sat Jul 9 15:01:03 1994 Eric Youngdale (eric@esp22)
-
- More changes to eventually support loadable modules. Mainly
- we want to use linked lists instead of arrays because it is easier
- to dynamically add and remove things this way.
-
- Quite a bit more work is needed before loadable modules are
- possible (and usable) with scsi, but this is most of the grunge
- work.
-
- * Linux 1.1.28 released.
-
- * scsi.c, scsi.h (allocate_device, request_queueable): Change
- argument from index into scsi_devices to a pointer to the
- Scsi_Device struct.
-
- * Throughout: Change all calls to allocate_device,
- request_queueable to use new calling sequence.
-
- * Throughout: Use SCpnt->device instead of
- scsi_devices[SCpnt->index]. Ugh - the pointer was there all along
- - much cleaner this way.
-
- * scsi.c (scsi_init_malloc, scsi_free_malloc): New functions -
- allow us to pretend that we have a working malloc when we
- initialize. Use this instead of passing memory_start, memory_end
- around all over the place.
-
- * scsi.h, st.c, sr.c, sd.c, sg.c: Change *_init1 functions to use
- scsi_init_malloc, remove all arguments, no return value.
-
- * scsi.h: Remove index field from Scsi_Device and Scsi_Cmnd
- structs.
-
- * scsi.c (scsi_dev_init): Set up for scsi_init_malloc.
- (scan_scsis): Get SDpnt from scsi_init_malloc, and refresh
- when we discover a device. Free pointer before returning.
- Change scsi_devices into a linked list.
-
- * scsi.c (scan_scsis): Change to only scan one host.
- (scsi_dev_init): Loop over all detected hosts, and scan them.
-
- * hosts.c (scsi_init_free): Change so that number of extra bytes
- is stored in struct, and we do not have to pass it each time.
-
- * hosts.h: Change Scsi_Host_Template struct to include "next" and
- "release" functions. Initialize to NULL in all low level
- adapters.
-
- * hosts.c: Rename scsi_hosts to builtin_scsi_hosts, create linked
- list scsi_hosts, linked together with the new "next" field.
-
-Wed Jul 6 05:45:02 1994 Eric Youngdale (eric@esp22)
-
- * Linux 1.1.25 released.
-
- * aha152x.c: Changes from Juergen - cleanups and updates.
-
- * sd.c, sr.c: Use new check_media_change and revalidate
- file_operations fields.
-
- * st.c, st.h: Add changes from Kai Makisara, dated Jun 22.
-
- * hosts.h: Change SG_ALL back to 0xff. Apparently soft error
- in /dev/brain resulted in having this bumped up.
- Change first parameter in bios_param function to be Disk * instead
- of index into rscsi_disks.
-
- * sd_ioctl.c: Pass pointer to rscsi_disks element instead of index
- to array.
-
- * sd.h: Add struct name "scsi_disk" to typedef for Scsi_Disk.
-
- * scsi.c: Remove redundant Maxtor XT8760S from blacklist.
- In scsi_reset, add printk when DEBUG defined.
-
- * All low level drivers: Modify definitions of bios_param in
- appropriate way.
-
-Thu Jun 16 10:31:59 1994 Eric Youngdale (eric@esp22)
-
- * Linux 1.1.20 released.
-
- * scsi_ioctl.c: Only pass down the actual number of characters
- required to scsi_do_cmd, not the one rounded up to a even number
- of sectors.
-
- * ultrastor.c: Changes from Caleb Epstein for 24f cards. Support
- larger SG lists.
-
- * ultrastor.c: Changes from me - use scsi_register to register
- host. Add some consistency checking,
-
-Wed Jun 1 21:12:13 1994 Eric Youngdale (eric@esp22)
-
- * Linux 1.1.19 released.
-
- * scsi.h: Add new return code for reset() function:
- SCSI_RESET_PUNT.
-
- * scsi.c: Make SCSI_RESET_PUNT the same as SCSI_RESET_WAKEUP for
- now.
-
- * aha1542.c: If the command responsible for the reset is not
- pending, return SCSI_RESET_PUNT.
-
- * aha1740.c, buslogic.c, wd7000.c, ultrastor.c: Return
- SCSI_RESET_PUNT instead of SCSI_RESET_SNOOZE.
-
-Tue May 31 19:36:01 1994 Eric Youngdale (eric@esp22)
-
- * buslogic.c: Do not print out message about "must be Adaptec"
- if we have detected a buslogic card. Print out a warning message
- if we are configuring for >16Mb, since the 445S at board level
- D or earlier does not work right. The "D" level board can be made
- to work by flipping an undocumented switch, but this is too subtle.
-
- Changes based upon patches in Yggdrasil distribution.
-
- * sg.c, sg.h: Return sense data to user.
-
- * aha1542.c, aha1740.c, buslogic.c: Do not panic if
- sense buffer is wrong size.
-
- * hosts.c: Test for ultrastor card before any of the others.
-
- * scsi.c: Allow boot-time option for max_scsi_luns=? so that
- buggy firmware has an easy work-around.
-
-Sun May 15 20:24:34 1994 Eric Youngdale (eric@esp22)
-
- * Linux 1.1.15 released.
-
- Post-codefreeze thaw...
-
- * buslogic.[c,h]: New driver from David Gentzel.
-
- * hosts.h: Add use_clustering field to explicitly say whether
- clustering should be used for devices attached to this host
- adapter. The buslogic board apparently supports large SG lists,
- but it is apparently faster if sd.c condenses this into a smaller
- list.
-
- * sd.c: Use this field instead of heuristic.
-
- * All host adapter include files: Add appropriate initializer for
- use_clustering field.
-
- * scsi.h: Add #defines for return codes for the abort and reset
- functions. There are now a specific set of return codes to fully
- specify all of the possible things that the low-level adapter
- could do.
-
- * scsi.c: Act based upon return codes from abort/reset functions.
-
- * All host adapter abort/reset functions: Return new return code.
-
- * Add code in scsi.c to help debug timeouts. Use #define
- DEBUG_TIMEOUT to enable this.
-
- * scsi.c: If the host->irq field is set, use
- disable_irq/enable_irq before calling queuecommand if we
- are not already in an interrupt. Reduce races, and we
- can be sloppier about cli/sti in the interrupt routines now
- (reduce interrupt latency).
-
- * constants.c: Fix some things to eliminate warnings. Add some
- sense descriptions that were omitted before.
-
- * aha1542.c: Watch for SCRD from host adapter - if we see it, set
- a flag. Currently we only print out the number of pending
- commands that might need to be restarted.
-
- * aha1542.c (aha1542_abort): Look for lost interrupts, OGMB still
- full, and attempt to recover. Otherwise give up.
-
- * aha1542.c (aha1542_reset): Try BUS DEVICE RESET, and then pass
- DID_RESET back up to the upper level code for all commands running
- on this target (even on different LUNs).
-
-Sat May 7 14:54:01 1994
-
- * Linux 1.1.12 released.
-
- * st.c, st.h: New version from Kai. Supports boot time
- specification of number of buffers.
-
- * wd7000.[c,h]: Updated driver from John Boyd. Now supports
- more than one wd7000 board in machine at one time, among other things.
-
-Wed Apr 20 22:20:35 1994
-
- * Linux 1.1.8 released.
-
- * sd.c: Add a few type casts where scsi_malloc is called.
-
-Wed Apr 13 12:53:29 1994
-
- * Linux 1.1.4 released.
-
- * scsi.c: Clean up a few printks (use %p to print pointers).
-
-Wed Apr 13 11:33:02 1994
-
- * Linux 1.1.3 released.
-
- * fdomain.c: Update to version 5.16 (Handle different FIFO sizes
- better).
-
-Fri Apr 8 08:57:19 1994
-
- * Linux 1.1.2 released.
-
- * Throughout: SCSI portion of cluster diffs added.
-
-Tue Apr 5 07:41:50 1994
-
- * Linux 1.1 development tree initiated.
-
- * The linux 1.0 development tree is now effectively frozen except
- for obvious bugfixes.
-
-******************************************************************
-******************************************************************
-******************************************************************
-******************************************************************
-
-Sun Apr 17 00:17:39 1994
-
- * Linux 1.0, patchlevel 9 released.
-
- * fdomain.c: Update to version 5.16 (Handle different FIFO sizes
- better).
-
-Thu Apr 7 08:36:20 1994
-
- * Linux 1.0, patchlevel8 released.
-
- * fdomain.c: Update to version 5.15 from 5.9. Handles 3.4 bios.
-
-Sun Apr 3 14:43:03 1994
-
- * Linux 1.0, patchlevel6 released.
-
- * wd7000.c: Make stab at fixing race condition.
-
-Sat Mar 26 14:14:50 1994
-
- * Linux 1.0, patchlevel5 released.
-
- * aha152x.c, Makefile: Fix a few bugs (too much data message).
- Add a few more bios signatures. (Patches from Juergen).
-
- * aha1542.c: Fix race condition in aha1542_out.
-
-Mon Mar 21 16:36:20 1994
-
- * Linux 1.0, patchlevel3 released.
-
- * sd.c, st.c, sr.c, sg.c: Return -ENXIO, not -ENODEV if we attempt
- to open a non-existent device.
-
- * scsi.c: Add Chinon cdrom to blacklist.
-
- * sr_ioctl.c: Check return status of verify_area.
-
-Sat Mar 6 16:06:19 1994
-
- * Linux 1.0 released (technically a pre-release).
-
- * scsi.c: Add IMS CDD521, Maxtor XT-8760S to blacklist.
-
-Tue Feb 15 10:58:20 1994
-
- * pl15e released.
-
- * aha1542.c: For 1542C, allow dynamic device scan with >1Gb turned
- off.
-
- * constants.c: Fix typo in definition of CONSTANTS.
-
- * pl15d released.
-
-Fri Feb 11 10:10:16 1994
-
- * pl15c released.
-
- * scsi.c: Add Maxtor XT-3280 and Rodime RO3000S to blacklist.
-
- * scsi.c: Allow tagged queueing for scsi 3 devices as well.
- Some really old devices report a version number of 0. Disallow
- LUN != 0 for these.
-
-Thu Feb 10 09:48:57 1994
-
- * pl15b released.
-
-Sun Feb 6 12:19:46 1994
-
- * pl15a released.
-
-Fri Feb 4 09:02:17 1994
-
- * scsi.c: Add Teac cdrom to blacklist.
-
-Thu Feb 3 14:16:43 1994
-
- * pl15 released.
-
-Tue Feb 1 15:47:43 1994
-
- * pl14w released.
-
- * wd7000.c (wd_bases): Fix typo in last change.
-
-Mon Jan 24 17:37:23 1994
-
- * pl14u released.
-
- * aha1542.c: Support 1542CF/extended bios. Different from 1542C
-
- * wd7000.c: Allow bios at 0xd8000 as well.
-
- * ultrastor.c: Do not truncate cylinders to 1024.
-
- * fdomain.c: Update to version 5.9 (add new bios signature).
-
- * NCR5380.c: Update from Drew - should work a lot better now.
-
-Sat Jan 8 15:13:10 1994
-
- * pl14o released.
-
- * sr_ioctl.c: Zero reserved field before trying to set audio volume.
-
-Wed Jan 5 13:21:10 1994
-
- * pl14m released.
-
- * fdomain.c: Update to version 5.8. No functional difference???
-
-Tue Jan 4 14:26:13 1994
-
- * pl14l released.
-
- * ultrastor.c: Remove outl, inl functions (now provided elsewhere).
-
-Mon Jan 3 12:27:25 1994
-
- * pl14k released.
-
- * aha152x.c: Remove insw and outsw functions.
-
- * fdomain.c: Ditto.
-
-Wed Dec 29 09:47:20 1993
-
- * pl14i released.
-
- * scsi.c: Support RECOVERED_ERROR for tape drives.
-
- * st.c: Update of tape driver from Kai.
-
-Tue Dec 21 09:18:30 1993
-
- * pl14g released.
-
- * aha1542.[c,h]: Support extended BIOS stuff.
-
- * scsi.c: Clean up messages about disks, so they are displayed as
- sda, sdb, etc instead of sd0, sd1, etc.
-
- * sr.c: Force reread of capacity if disk was changed.
- Clear buffer before asking for capacity/sectorsize (some drives
- do not report this properly). Set needs_sector_size flag if
- drive did not return sensible sector size.
-
-Mon Dec 13 12:13:47 1993
-
- * aha152x.c: Update to version .101 from Juergen.
-
-Mon Nov 29 03:03:00 1993
-
- * linux 0.99.14 released.
-
- * All scsi stuff moved from kernel/blk_drv/scsi to drivers/scsi.
-
- * Throughout: Grammatical corrections to various comments.
-
- * Makefile: fix so that we do not need to compile things we are
- not going to use.
-
- * NCR5380.c, NCR5380.h, g_NCR5380.c, g_NCR5380.h, pas16.c,
- pas16.h, t128.c, t128.h: New files from Drew.
-
- * aha152x.c, aha152x.h: New files from Juergen Fischer.
-
- * aha1542.c: Support for more than one 1542 in the machine
- at the same time. Make functions static that do not need
- visibility.
-
- * aha1740.c: Set NEEDS_JUMPSTART flag in reset function, so we
- know to restart the command. Change prototype of aha1740_reset
- to take a command pointer.
-
- * constants.c: Clean up a few things.
-
- * fdomain.c: Update to version 5.6. Move snarf_region. Allow
- board to be set at different SCSI ids. Remove support for
- reselection (did not work well). Set JUMPSTART flag in reset
- code.
-
- * hosts.c: Support new low-level adapters. Allow for more than
- one adapter of a given type.
-
- * hosts.h: Allow for more than one adapter of a given type.
-
- * scsi.c: Add scsi_device_types array, if NEEDS_JUMPSTART is set
- after a low-level reset, start the command again. Sort blacklist,
- and add Maxtor MXT-1240S, XT-4170S, NEC CDROM 84, Seagate ST157N.
-
- * scsi.h: Add constants for tagged queueing.
-
- * Throughout: Use constants from major.h instead of hardcoded
- numbers for major numbers.
-
- * scsi_ioctl.c: Fix bug in buffer length in ioctl_command. Use
- verify_area in GET_IDLUN ioctl. Add new ioctls for
- TAGGED_QUEUE_ENABLE, DISABLE. Only allow IOCTL_SEND_COMMAND by
- superuser.
-
- * sd.c: Only pay attention to UNIT_ATTENTION for removable disks.
- Fix bug where sometimes portions of blocks would get lost
- resulting in processes hanging. Add messages when we spin up a
- disk, and fix a bug in the timing. Increase read-ahead for disks
- that are on a scatter-gather capable host adapter.
-
- * seagate.c: Fix so that some parameters can be set from the lilo
- prompt. Supply jumpstart flag if we are resetting and need the
- command restarted. Fix so that we return 1 if we detect a card
- so that multiple card detection works correctly. Add yet another
- signature for FD cards (950). Add another signature for ST0x.
-
- * sg.c, sg.h: New files from Lawrence Foard for generic scsi
- access.
-
- * sr.c: Add type casts for (void*) so that we can do pointer
- arithmetic. Works with GCC without this, but it is not strictly
- correct. Same bugfix as was in sd.c. Increase read-ahead a la
- disk driver.
-
- * sr_ioctl.c: Use scsi_malloc buffer instead of buffer from stack
- since we cannot guarantee that the stack is < 16Mb.
-
- ultrastor.c: Update to support 24f properly (JFC's driver).
-
- wd7000.c: Supply jumpstart flag for reset. Do not round up
- number of cylinders in biosparam function.
-
-Sat Sep 4 20:49:56 1993
-
- * 0.99pl13 released.
-
- * Throughout: Use check_region/snarf_region for all low-level
- drivers.
-
- * aha1542.c: Do hard reset instead of soft (some ethercard probes
- screw us up).
-
- * scsi.c: Add new flag ASKED_FOR_SENSE so that we can tell if we are
- in a loop whereby the device returns null sense data.
-
- * sd.c: Add code to spin up a drive if it is not already spinning.
- Do this one at a time to make it easier on power supplies.
-
- * sd_ioctl.c: Use sync_dev instead of fsync_dev in BLKFLSBUF ioctl.
-
- * seagate.c: Switch around DATA/CONTROL lines.
-
- * st.c: Change sense to unsigned.
-
-Thu Aug 5 11:59:18 1993
-
- * 0.99pl12 released.
-
- * constants.c, constants.h: New files with ascii descriptions of
- various conditions.
-
- * Makefile: Do not try to count the number of low-level drivers,
- just generate the list of .o files.
-
- * aha1542.c: Replace 16 with sizeof(SCpnt->sense_buffer). Add tests
- for addresses > 16Mb, panic if we find one.
-
- * aha1740.c: Ditto with sizeof().
-
- * fdomain.c: Update to version 3.18. Add new signature, register IRQ
- with irqaction. Use ID 7 for new board. Be more intelligent about
- obtaining the h/s/c numbers for biosparam.
-
- * hosts.c: Do not depend upon Makefile generated count of the number
- of low-level host adapters.
-
- * scsi.c: Use array for scsi_command_size instead of a function. Add
- Texel cdrom and Maxtor XT-4380S to blacklist. Allow compile time
- option for no-multi lun scan. Add semaphore for possible problems
- with handshaking, assume device is faulty until we know it not to be
- the case. Add DEBUG_INIT symbol to dump info as we scan for devices.
- Zero sense buffer so we can tell if we need to request it. When
- examining sense information, request sense if buffer is all zero.
- If RESET, request sense information to see what to do next.
-
- * scsi_debug.c: Change some constants to use symbols like INT_MAX.
-
- * scsi_ioctl.c (kernel_scsi_ioctl): New function -for making ioctl
- calls from kernel space.
-
- * sd.c: Increase timeout to 300. Use functions in constants.h to
- display info. Use scsi_malloc buffer for READ_CAPACITY, since
- we cannot guarantee that a stack based buffer is < 16Mb.
-
- * sd_ioctl.c: Add BLKFLSBUF ioctl.
-
- * seagate.c: Add new compile time options for ARBITRATE,
- SLOW_HANDSHAKE, and SLOW_RATE. Update assembly loops for transferring
- data. Use kernel_scsi_ioctl to request mode page with geometry.
-
- * sr.c: Use functions in constants.c to display messages.
-
- * st.c: Support for variable block size.
-
- * ultrastor.c: Do not use cache for tape drives. Set
- unchecked_isa_dma flag, even though this may not be needed (gets set
- later).
-
-Sat Jul 17 18:32:44 1993
-
- * 0.99pl11 released. C++ compilable.
-
- * Throughout: Add type casts all over the place, and use "ip" instead
- of "info" in the various biosparam functions.
-
- * Makefile: Compile seagate.c with C++ compiler.
-
- * aha1542.c: Always set ccb pointer as this gets trashed somehow on
- some systems. Add a few type casts. Update biosparam function a little.
-
- * aha1740.c: Add a few type casts.
-
- * fdomain.c: Update to version 3.17 from 3.6. Now works with
- TMC-18C50.
-
- * scsi.c: Minor changes here and there with datatypes. Save use_sg
- when requesting sense information so that this can properly be
- restored if we retry the command. Set aside dma buffers assuming each
- block is 1 page, not 1Kb minix block.
-
- * scsi_ioctl.c: Add a few type casts. Other minor changes.
-
- * sd.c: Correctly free all scsi_malloc'd memory if we run out of
- dma_pool. Store blocksize information for each partition.
-
- * seagate.c: Minor cleanups here and there.
-
- * sr.c: Set up blocksize array for all discs. Fix bug in freeing
- buffers if we run out of dma pool.
-
-Thu Jun 2 17:58:11 1993
-
- * 0.99pl10 released.
-
- * aha1542.c: Support for BT 445S (VL-bus board with no dma channel).
-
- * fdomain.c: Upgrade to version 3.6. Preliminary support for TNC-18C50.
-
- * scsi.c: First attempt to fix problem with old_use_sg. Change
- NOT_READY to a SUGGEST_ABORT. Fix timeout race where time might
- get decremented past zero.
-
- * sd.c: Add block_fsync function to dispatch table.
-
- * sr.c: Increase timeout to 500 from 250. Add entry for sync in
- dispatch table (supply NULL). If we do not have a sectorsize,
- try to get it in the sd_open function. Add new function just to
- obtain sectorsize.
-
- * sr.h: Add needs_sector_size semaphore.
-
- * st.c: Add NULL for fsync in dispatch table.
-
- * wd7000.c: Allow another condition for power on that are normal
- and do not require a panic.
-
-Thu Apr 22 23:10:11 1993
-
- * 0.99pl9 released.
-
- * aha1542.c: Use (void) instead of () in setup_mailboxes.
-
- * scsi.c: Initialize transfersize and underflow fields in SCmd to 0.
- Do not panic for unsupported message bytes.
-
- * scsi.h: Allocate 12 bytes instead of 10 for commands. Add
- transfersize and underflow fields.
-
- * scsi_ioctl.c: Further bugfix to ioctl_probe.
-
- * sd.c: Use long instead of int for last parameter in sd_ioctl.
- Initialize transfersize and underflow fields.
-
- * sd_ioctl.c: Ditto for sd_ioctl(,,,,);
-
- * seagate.c: New version from Drew. Includes new signatures for FD
- cards. Support for 0ws jumper. Correctly initialize
- scsi_hosts[hostnum].this_id. Improved handing of
- disconnect/reconnect, and support command linking. Use
- transfersize and underflow fields. Support scatter-gather.
-
- * sr.c, sr_ioctl.c: Use long instead of int for last parameter in sr_ioctl.
- Use buffer and buflength in do_ioctl. Patches from Chris Newbold for
- scsi-2 audio commands.
-
- * ultrastor.c: Comment out in_byte (compiler warning).
-
- * wd7000.c: Change () to (void) in wd7000_enable_dma.
-
-Wed Mar 31 16:36:25 1993
-
- * 0.99pl8 released.
-
- * aha1542.c: Handle mailboxes better for 1542C.
- Do not truncate number of cylinders at 1024 for biosparam call.
-
- * aha1740.c: Fix a few minor bugs for multiple devices.
- Same as above for biosparam.
-
- * scsi.c: Add lockable semaphore for removable devices that can have
- media removal prevented. Add another signature for flopticals.
- (allocate_device): Fix race condition. Allow more space in dma pool
- for blocksizes of up to 4Kb.
-
- * scsi.h: Define COMMAND_SIZE. Define a SCSI specific version of
- INIT_REQUEST that can run with interrupts off.
-
- * scsi_ioctl.c: Make ioctl_probe function more idiot-proof. If
- a removable device says ILLEGAL REQUEST to a door-locking command,
- clear lockable flag. Add SCSI_IOCTL_GET_IDLUN ioctl. Do not attempt
- to lock door for devices that do not have lockable semaphore set.
-
- * sd.c: Fix race condition for multiple disks. Use INIT_SCSI_REQUEST
- instead of INIT_REQUEST. Allow sector sizes of 1024 and 256. For
- removable disks that are not ready, mark them as having a media change
- (some drives do not report this later).
-
- * seagate.c: Use volatile keyword for memory-mapped register pointers.
-
- * sr.c: Fix race condition, a la sd.c. Increase the number of retries
- to 1. Use INIT_SCSI_REQUEST. Allow 512 byte sector sizes. Do a
- read_capacity when we init the device so we know the size and
- sectorsize.
-
- * st.c: If ioctl not found in st.c, try scsi_ioctl for others.
-
- * ultrastor.c: Do not truncate number of cylinders at 1024 for
- biosparam call.
-
- * wd7000.c: Ditto.
- Throughout: Use COMMAND_SIZE macro to determine length of scsi
- command.
-
-
-
-Sat Mar 13 17:31:29 1993
-
- * 0.99pl7 released.
-
- Throughout: Improve punctuation in some messages, and use new
- verify_area syntax.
-
- * aha1542.c: Handle unexpected interrupts better.
-
- * scsi.c: Ditto. Handle reset conditions a bit better, asking for
- sense information and retrying if required.
-
- * scsi_ioctl.c: Allow for 12 byte scsi commands.
-
- * ultrastor.c: Update to use scatter-gather.
-
-Sat Feb 20 17:57:15 1993
-
- * 0.99pl6 released.
-
- * fdomain.c: Update to version 3.5. Handle spurious interrupts
- better.
-
- * sd.c: Use register_blkdev function.
-
- * sr.c: Ditto.
-
- * st.c: Use register_chrdev function.
-
- * wd7000.c: Undo previous change.
-
-Sat Feb 6 11:20:43 1993
-
- * 0.99pl5 released.
-
- * scsi.c: Fix bug in testing for UNIT_ATTENTION.
-
- * wd7000.c: Check at more addresses for bios. Fix bug in biosparam
- (heads & sectors turned around).
-
-Wed Jan 20 18:13:59 1993
-
- * 0.99pl4 released.
-
- * scsi.c: Ignore leading spaces when looking for blacklisted devices.
-
- * seagate.c: Add a few new signatures for FD cards. Another patch
- with SCint to fix race condition. Use recursion_depth to keep track
- of how many times we have been recursively called, and do not start
- another command unless we are on the outer level. Fixes bug
- with Syquest cartridge drives (used to crash kernel), because
- they do not disconnect with large data transfers.
-
-Tue Jan 12 14:33:36 1993
-
- * 0.99pl3 released.
-
- * fdomain.c: Update to version 3.3 (a few new signatures).
-
- * scsi.c: Add CDU-541, Denon DRD-25X to blacklist.
- (allocate_request, request_queueable): Init request.waiting to NULL if
- non-buffer type of request.
-
- * seagate.c: Allow controller to be overridden with CONTROLLER symbol.
- Set SCint=NULL when we are done, to remove race condition.
-
- * st.c: Changes from Kai.
-
-Wed Dec 30 20:03:47 1992
-
- * 0.99pl2 released.
-
- * scsi.c: Blacklist back in. Remove Newbury drive as other bugfix
- eliminates need for it here.
-
- * sd.c: Return ENODEV instead of EACCES if no such device available.
- (sd_init) Init blkdev_fops earlier so that sd_open is available sooner.
-
- * sr.c: Same as above for sd.c.
-
- * st.c: Return ENODEV instead of ENXIO if no device. Init chrdev_fops
- sooner, so that it is always there even if no tapes.
-
- * seagate.c (controller_type): New variable to keep track of ST0x or
- FD. Modify signatures list to indicate controller type, and init
- controller_type once we find a match.
-
- * wd7000.c (wd7000_set_sync): Remove redundant function.
-
-Sun Dec 20 16:26:24 1992
-
- * 0.99pl1 released.
-
- * scsi_ioctl.c: Bugfix - check dev->index, not dev->id against
- NR_SCSI_DEVICES.
-
- * sr_ioctl.c: Verify that device exists before allowing an ioctl.
-
- * st.c: Patches from Kai - change timeout values, improve end of tape
- handling.
-
-Sun Dec 13 18:15:23 1992
-
- * 0.99 kernel released. Baseline for this ChangeLog.
diff --git a/Documentation/scsi/Mylex.txt b/Documentation/scsi/Mylex.txt
deleted file mode 100644
index 3797f3e6c2b5..000000000000
--- a/Documentation/scsi/Mylex.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-Please see the file README.BusLogic for information about Linux support for
-Mylex (formerly BusLogic) MultiMaster and FlashPoint SCSI Host Adapters.
-
-The Mylex DAC960 PCI RAID Controllers are now supported. Please consult
-http://sourceforge.net/projects/dandelion for further information on the DAC960 driver.
diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
index 453d4b79c78d..25a4b4cf04a6 100644
--- a/Documentation/scsi/scsi-parameters.txt
+++ b/Documentation/scsi/scsi-parameters.txt
@@ -34,11 +34,6 @@ parameters may be changed at runtime by the command
See drivers/scsi/BusLogic.c, comment before function
BusLogic_ParseDriverOptions().
- eata= [HW,SCSI]
-
- fdomain= [HW,SCSI]
- See header of drivers/scsi/fdomain.c.
-
gdth= [HW,SCSI]
See header of drivers/scsi/gdth.c.
@@ -70,8 +65,6 @@ parameters may be changed at runtime by the command
ncr53c400a= [HW,SCSI]
See Documentation/scsi/g_NCR5380.txt.
- ncr53c406a= [HW,SCSI]
-
ncr53c8xx= [HW,SCSI]
osst= [HW,SCSI] SCSI Tape Driver
@@ -110,12 +103,5 @@ parameters may be changed at runtime by the command
st= [HW,SCSI] SCSI tape parameters (buffers, etc.)
See Documentation/scsi/st.txt.
- sym53c416= [HW,SCSI]
- See header of drivers/scsi/sym53c416.c.
-
- tmscsim= [HW,SCSI]
- See comment before function dc390_setup() in
- drivers/scsi/tmscsim.c.
-
wd33c93= [HW,SCSI]
See header of drivers/scsi/wd33c93.c.
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index 2c31d9ee6776..177c031763c0 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -114,9 +114,7 @@ called "xxx" could be defined as
"static int xxx_slave_alloc(struct scsi_device * sdev) { /* code */ }"
** the scsi_host_alloc() function is a replacement for the rather vaguely
-named scsi_register() function in most situations. The scsi_register()
-and scsi_unregister() functions remain to support legacy LLDs that use
-the passive initialization model.
+named scsi_register() function in most situations.
Hotplug initialization model
@@ -228,79 +226,6 @@ slave_configure() callbacks). Such instances are "owned" by the mid-level.
struct scsi_device instances are freed after slave_destroy().
-Passive initialization model
-============================
-These older LLDs include a file called "scsi_module.c" [yes the ".c" is a
-little surprising] in their source code. For that file to work an
-instance of struct scsi_host_template with the name "driver_template"
-needs to be defined. Here is a typical code sequence used in this model:
- static struct scsi_host_template driver_template = {
- ...
- };
- #include "scsi_module.c"
-
-The scsi_module.c file contains two functions:
- - init_this_scsi_driver() which is executed when the LLD is
- initialized (i.e. boot time or module load time)
- - exit_this_scsi_driver() which is executed when the LLD is shut
- down (i.e. module unload time)
-Note: since these functions are tagged with __init and __exit qualifiers
-an LLD should not call them explicitly (since the kernel does that).
-
-Here is an example of an initialization sequence when two hosts are
-detected (so detect() returns 2) and the SCSI bus scan on each host
-finds 1 SCSI device (and a second device does not respond).
-
-LLD mid level LLD
-===----------------------=========-----------------===------
-init_this_scsi_driver() ----+
- |
- detect() -----------------+
- | |
- | scsi_register()
- | scsi_register()
- |
- slave_alloc()
- slave_configure() --> scsi_change_queue_depth()
- slave_alloc() ***
- slave_destroy() ***
- |
- slave_alloc()
- slave_configure()
- slave_alloc() ***
- slave_destroy() ***
-------------------------------------------------------------
-
-The mid level invokes scsi_change_queue_depth() with "cmd_per_lun" for that
-host as the queue length. These settings can be overridden by a
-slave_configure() supplied by the LLD.
-
-*** For scsi devices that the mid level tries to scan but do not
- respond, a slave_alloc(), slave_destroy() pair is called.
-
-Here is an LLD shutdown sequence:
-
-LLD mid level LLD
-===----------------------=========-----------------===------
-exit_this_scsi_driver() ----+
- |
- slave_destroy()
- release() --> scsi_unregister()
- |
- slave_destroy()
- release() --> scsi_unregister()
-------------------------------------------------------------
-
-An LLD need not define slave_destroy() (i.e. it is optional).
-
-The shortcoming of the "passive initialization model" is that host
-registration and de-registration are (typically) tied to LLD initialization
-and shutdown. Once the LLD is initialized then a new host that appears
-(e.g. via hotplugging) cannot easily be added without a redundant
-driver shutdown and re-initialization. It may be possible to write an LLD
-that uses both initialization models.
-
-
Reference Counting
==================
The Scsi_Host structure has had reference counting infrastructure added.
@@ -738,7 +663,6 @@ The interface functions are listed below in alphabetical order.
Summary:
bios_param - fetch head, sector, cylinder info for a disk
- detect - detects HBAs this driver wants to control
eh_timed_out - notify the host that a command timer expired
eh_abort_handler - abort given command
eh_bus_reset_handler - issue SCSI bus reset
@@ -748,7 +672,6 @@ Summary:
ioctl - driver can respond to ioctls
proc_info - supports /proc/scsi/{driver_name}/{host_no}
queuecommand - queue scsi command, invoke 'done' on completion
- release - release all resources associated with given host
slave_alloc - prior to any commands being sent to a new device
slave_configure - driver fine tuning for given device after attach
slave_destroy - given device is about to be shut down
@@ -785,28 +708,6 @@ Details:
/**
- * detect - detects HBAs this driver wants to control
- * @shtp: host template for this driver.
- *
- * Returns number of hosts this driver wants to control. 0 means no
- * suitable hosts found.
- *
- * Locks: none held
- *
- * Calling context: process [invoked from init_this_scsi_driver()]
- *
- * Notes: First function called from the SCSI mid level on this
- * driver. Upper level drivers (e.g. sd) may not (yet) be present.
- * For each host found, this method should call scsi_register()
- * [see hosts.c].
- *
- * Defined in: LLD (required if "passive initialization mode" is used,
- * not invoked in "hotplug initialization mode")
- **/
- int detect(struct scsi_host_template * shtp)
-
-
-/**
* eh_timed_out - The timer for the command has just fired
* @scp: identifies command timing out
*
@@ -1074,27 +975,6 @@ Details:
/**
- * release - release all resources associated with given host
- * @shp: host to be released.
- *
- * Return value ignored (could soon be a function returning void).
- *
- * Locks: none held
- *
- * Calling context: process
- *
- * Notes: Invoked from scsi_module.c's exit_this_scsi_driver().
- * LLD's implementation of this function should call
- * scsi_unregister(shp) prior to returning.
- * Only needed for old-style host templates.
- *
- * Defined in: LLD (required in "passive initialization model",
- * should not be defined in hotplug model)
- **/
- int release(struct Scsi_Host * shp)
-
-
-/**
* slave_alloc - prior to any commands being sent to a new device
* (i.e. just prior to scan) this call is made
* @sdp: pointer to new device (about to be scanned)
diff --git a/Documentation/scsi/sd-parameters.txt b/Documentation/scsi/sd-parameters.txt
new file mode 100644
index 000000000000..8e5af00d88e7
--- /dev/null
+++ b/Documentation/scsi/sd-parameters.txt
@@ -0,0 +1,22 @@
+Linux SCSI Disk Driver (sd) Parameters
+======================================
+
+cache_type (RW)
+---------------
+Enable/disable drive write & read cache.
+
+ cache_type string | WCE RCD | Write cache | Read cache
+----------------------------+---------+-------------+------------
+ write through | 0 0 | off | on
+ none | 0 1 | off | off
+ write back | 1 0 | on | on
+ write back, no read (daft) | 1 1 | on | off
+
+To set cache type to "write back" and save this setting to the drive:
+
+ # echo "write back" > cache_type
+
+To modify the caching mode without making the change persistent, prepend
+"temporary " to the cache type string. E.g.:
+
+ # echo "temporary write back" > cache_type
diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt
deleted file mode 100644
index 0e0322bf0020..000000000000
--- a/Documentation/scsi/tmscsim.txt
+++ /dev/null
@@ -1,443 +0,0 @@
-The tmscsim driver
-==================
-
-1. Purpose and history
-2. Installation
-3. Features
-4. Configuration via /proc/scsi/tmscsim/?
-5. Configuration via boot/module params
-6. Potential improvements
-7. Bug reports, debugging and updates
-8. Acknowledgements
-9. Copyright
-
-
-1. Purpose and history
-----------------------
-The tmscsim driver supports PCI SCSI Host Adapters based on the AM53C974
-chip. AM53C974 based SCSI adapters include:
- Tekram DC390, DC390T
- Dawicontrol 2974
- QLogic Fast! PCI Basic
- some on-board adapters
-(This is most probably not a complete list)
-
-It has originally written by C.L. Huang from the Tekram corp. to support the
-Tekram DC390(T) adapter. This is where the name comes from: tm = Tekram
-scsi = SCSI driver, m = AMD (?) as opposed to w for the DC390W/U/F
-(NCR53c8X5, X=2/7) driver. Yes, there was also a driver for the latter,
-tmscsiw, which supported DC390W/U/F adapters. It's not maintained any more,
-as the ncr53c8xx is perfectly supporting these adapters since some time.
-
-The driver first appeared in April 1996, exclusively supported the DC390
-and has been enhanced since then in various steps. In May 1998 support for
-general AM53C974 based adapters and some possibilities to configure it were
-added. The non-DC390 support works by assuming some values for the data
-normally taken from the DC390 EEPROM. See below (chapter 5) for details.
-
-When using the DC390, the configuration is still be done using the DC390
-BIOS setup. The DC390 EEPROM is read and used by the driver, any boot or
-module parameters (chapter 5) are ignored! However, you can change settings
-dynamically, as described in chapter 4.
-
-For a more detailed description of the driver's history, see the first lines
-of tmscsim.c.
-The numbering scheme isn't consistent. The first versions went from 1.00 to
-1.12, then 1.20a to 1.20t. Finally I decided to use the ncr53c8xx scheme. So
-the next revisions will be 2.0a to 2.0X (stable), 2.1a to 2.1X (experimental),
-2.2a to 2.2X (stable, again) etc. (X = anything between a and z.) If I send
-fixes to people for testing, I create intermediate versions with a digit
-appended, e.g. 2.0c3.
-
-
-2. Installation
----------------
-If you got any recent kernel with this driver and document included in
-linux/drivers/scsi, you basically have to do nothing special to use this
-driver. Of course you have to choose to compile SCSI support and DC390(T)
-support into your kernel or as module when configuring your kernel for
-compiling.
-NEW: You may as well compile this module outside your kernel, using the
-supplied Makefile.
-
- If you got an old kernel (pre 2.1.127, pre 2.0.37p1) with an old version of
- this driver: Get dc390-21125-20b.diff.gz or dc390-2036p21-20b1.diff.gz from
- my web page and apply the patch. Apply further patches to upgrade to the
- latest version of the driver.
-
- If you want to do it manually, you should copy the files (dc390.h,
- tmscsim.h, tmscsim.c, scsiiom.c and README.tmscsim) from this directory to
- linux/drivers/scsi. You have to recompile your kernel/module of course.
-
- You should apply the three patches included in dc390-120-kernel.diff
- (Applying them: cd /usr/src; patch -p0 <~/dc390-120-kernel.diff)
- The patches are against 2.1.125, so you might have to manually resolve
- rejections when applying to another kernel version.
-
- The patches will update the kernel startup code to allow boot parameters to
- be passed to the driver, update the Documentation and finally offer you the
- possibility to omit the non-DC390 parts of the driver.
- (By selecting "Omit support for non DC390" you basically disable the
- emulation of a DC390 EEPROM for non DC390 adapters. This saves a few bytes
- of memory.)
-
-If you got a very old kernel without the tmscsim driver (pre 2.0.31)
-I recommend upgrading your kernel. However, if you don't want to, please
-contact me to get the appropriate patches.
-
-
-Upgrading a SCSI driver is always a delicate thing to do. The 2.0 driver has
-proven stable on many systems, but it's still a good idea to take some
-precautions. In an ideal world you would have a full backup of your disks.
-The world isn't ideal and most people don't have full backups (me neither).
-So take at least the following measures:
-* make your kernel remount the FS read-only on detecting an error:
- tune2fs -e remount-ro /dev/sd??
-* have copies of your SCSI disk's partition tables on some safe location:
- dd if=/dev/sda of=/mnt/floppy/sda bs=512 count=1
- or just print it with:
- fdisk -l | lpr
-* make sure you are able to boot Linux (e.g. from floppy disk using InitRD)
- if your SCSI disk gets corrupted. You can use
- ftp://student.physik.uni-dortmund.de/pub/linux/kernel/bootdisk.gz
-
-One more warning: I used to overclock my PCI bus to 41.67 MHz. My Tekram
-DC390F (Sym53c875) accepted this as well as my Millennium. But the Am53C974
-produced errors and started to corrupt my disks. So don't do that! A 37.50
-MHz PCI bus works for me, though, but I don't recommend using higher clocks
-than the 33.33 MHz being in the PCI spec.
-
-
-3.Features
-----------
-- SCSI
- * Tagged command queueing
- * Sync speed up to 10 MHz
- * Disconnection
- * Multiple LUNs
-
-- General / Linux interface
- * Support for up to 4 AM53C974 adapters.
- * DC390 EEPROM usage or boot/module params
- * Information via cat /proc/scsi/tmscsim/?
- * Dynamically configurable by writing to /proc/scsi/tmscsim/?
- * Dynamic allocation of resources
- * SMP support: Locking on io_request lock (Linux 2.1/2.2) or adapter
- specific locks (Linux 2.5?)
- * Uniform source code for Linux-2.x.y
- * Support for dyn. addition/removal of devices via add/remove-single-device
- (Try: echo "scsi add-single-device C B T U" >/proc/scsi/scsi
- C = Controller, B = Bus, T = Target SCSI ID, U = Unit SCSI LUN.)
- Use with care!
- * Try to use the partition table for the determination of the mapping
-
-
-4. Configuration via /proc/scsi/tmscsim/?
------------------------------------------
-First of all look at the output of /proc/scsi/tmscsim/? by typing
- cat /proc/scsi/tmscsim/?
-The "?" should be replaced by the SCSI host number. (The shell might do this
-for you.)
-You will see some info regarding the adapter and, at the end, a listing of
-the attached devices and their settings.
-
-Here's an example:
-garloff@kurt:/home/garloff > cat /proc/scsi/tmscsim/0
-Tekram DC390/AM53C974 PCI SCSI Host Adapter, Driver Version 2.0e7 2000-11-28
-SCSI Host Nr 1, AM53C974 Adapter Nr 0
-IOPortBase 0xb000, IRQ 10
-MaxID 8, MaxLUN 8, AdapterID 6, SelTimeout 250 ms, DelayReset 1 s
-TagMaxNum 16, Status 0x00, ACBFlag 0x00, GlitchEater 24 ns
-Statistics: Cmnds 1470165, Cmnds not sent directly 0, Out of SRB conds 0
- Lost arbitrations 587, Sel. connected 0, Connected: No
-Nr of attached devices: 4, Nr of DCBs: 4
-Map of attached LUNs: 01 00 00 03 01 00 00 00
-Idx ID LUN Prty Sync DsCn SndS TagQ NegoPeriod SyncSpeed SyncOffs MaxCmd
-00 00 00 Yes Yes Yes Yes Yes 100 ns 10.0 M 15 16
-01 03 00 Yes Yes Yes Yes No 100 ns 10.0 M 15 01
-02 03 01 Yes Yes Yes Yes No 100 ns 10.0 M 15 01
-03 04 00 Yes Yes Yes Yes No 100 ns 10.0 M 15 01
-
-Note that the settings MaxID and MaxLUN are not zero- but one-based, which
-means that a setting MaxLUN=4, will result in the support of LUNs 0..3. This
-is somehow inconvenient, but the way the mid-level SCSI code expects it to be.
-
-ACB and DCB are acronyms for Adapter Control Block and Device Control Block.
-These are data structures of the driver containing information about the
-adapter and the connected SCSI devices respectively.
-
-Idx is the device index (just a consecutive number for the driver), ID and
-LUN are the SCSI ID and LUN, Prty means Parity checking, Sync synchronous
-negotiation, DsCn Disconnection, SndS Send Start command on startup (not
-used by the driver) and TagQ Tagged Command Queueing. NegoPeriod and
-SyncSpeed are somehow redundant, because they are reciprocal values
-(1 / 112 ns = 8.9 MHz). At least in theory. The driver is able to adjust the
-NegoPeriod more accurate (4ns) than the SyncSpeed (1 / 25ns). I don't know
-if certain devices will have problems with this discrepancy. Max. speed is
-10 MHz corresp. to a min. NegoPeriod of 100 ns.
-(The driver allows slightly higher speeds if the devices (Ultra SCSI) accept
-it, but that's out of adapter spec, on your own risk and unlikely to improve
-performance. You're likely to crash your disks.)
-SyncOffs is the offset used for synchronous negotiations; max. is 15.
-The last values are only shown, if Sync is enabled. (NegoPeriod is still
-displayed in brackets to show the values which will be used after enabling
-Sync.)
-MaxCmd ist the number of commands (=tags) which can be processed at the same
-time by the device.
-
-If you want to change a setting, you can do that by writing to
-/proc/scsi/tmscsim/?. Basically you have to imitate the output of driver.
-(Don't use the brackets for NegoPeriod on Sync disabled devices.)
-You don't have to care about capitalisation. The driver will accept space,
-tab, comma, = and : as separators.
-
-There are three kinds of changes:
-
-(1) Change driver settings:
- You type the names of the parameters and the params following it.
- Example:
- echo "MaxLUN=8 seltimeout 200" >/proc/scsi/tmscsim/0
-
- Note that you can only change MaxID, MaxLUN, AdapterID, SelTimeOut,
- TagMaxNum, ACBFlag, GlitchEater and DelayReset. Don't change ACBFlag
- unless you want to see what happens, if the driver hangs.
-
-(2) Change device settings: You write a config line to the driver. The Nr
- must match the ID and LUN given. If you give "-" as parameter, it is
- ignored and the corresponding setting won't be changed.
- You can use "y" or "n" instead of "Yes" and "No" if you want to.
- You don't need to specify a full line. The driver automatically performs
- an INQUIRY on the device if necessary to check if it is capable to operate
- with the given settings (Sync, TagQ).
- Examples:
- echo "0 0 0 y y y - y - 10 " >/proc/scsi/tmscsim/0
- echo "3 5 0 y n y " >/proc/scsi/tmscsim/0
-
- To give a short explanation of the first example:
- The first three numbers, "0 0 0" (Device index 0, SCSI ID 0, SCSI LUN 0),
- select the device to which the following parameters apply. Note that it
- would be sufficient to use the index or both SCSI ID and LUN, but I chose
- to require all three to have a syntax similar to the output.
- The following "y y y - y" enables Parity checking, enables Synchronous
- transfers, Disconnection, leaves Send Start (not used) untouched and
- enables Tagged Command Queueing for the selected device. The "-" skips
- the Negotiation Period setting but the "10" sets the max sync. speed to
- 10 MHz. It's useless to specify both NegoPeriod and SyncSpeed as
- discussed above. The values used in this example will result in maximum
- performance.
-
-(3) Special commands: You can force a SCSI bus reset, an INQUIRY command, the
- removal or the addition of a device's DCB and a SCSI register dump.
- This is only used for debugging when you meet problems. The parameter of
- the INQUIRY and REMOVE commands is the device index as shown by the
- output of /proc/scsi/tmscsim/? in the device listing in the first column
- (Idx). ADD takes the SCSI ID and LUN.
- Examples:
- echo "reset" >/proc/scsi/tmscsim/0
- echo "inquiry 1" >/proc/scsi/tmscsim/0
- echo "remove 2" >/proc/scsi/tmscsim/1
- echo "add 2 3" >/proc/scsi/tmscsim/?
- echo "dump" >/proc/scsi/tmscsim/0
-
- Note that you will meet problems when you REMOVE a device's DCB with the
- remove command if it contains partitions which are mounted. Only use it
- after unmounting its partitions, telling the SCSI mid-level code to
- remove it (scsi remove-single-device) and you really need a few bytes of
- memory.
- The ADD command allows you to configure a device before you tell the
- mid-level code to try detection.
-
-
-I'd suggest reviewing the output of /proc/scsi/tmscsim/? after changing
-settings to see if everything changed as requested.
-
-
-5. Configuration via boot/module parameters
--------------------------------------------
-With the DC390, the driver reads its EEPROM settings and tries to use them.
-But you may want to override the settings prior to being able to change the
-driver configuration via /proc/scsi/tmscsim/?.
-If you do have another AM53C974 based adapter, that's even the only
-possibility to adjust settings before you are able to write to the
-/proc/scsi/tmscsim/? pseudo-file, e.g. if you want to use another
-adapter ID than 7.
-(BTW, the log message "DC390: No EEPROM found!" is normal without a DC390.)
-For this purpose, you can pass options to the driver before it is initialised
-by using kernel or module parameters. See lilo(8) or modprobe(1) manual
-pages on how to pass params to the kernel or a module.
-[NOTE: Formerly, it was not possible to override the EEPROM supplied
- settings of the DC390 with cmd line parameters. This has changed since
- 2.0e7]
-
-The syntax of the params is much shorter than the syntax of the /proc/...
-interface. This makes it a little bit more difficult to use. However, long
-parameter lines have the risk to be misinterpreted and the length of kernel
-parameters is limited.
-
-As the support for non-DC390 adapters works by simulating the values of the
-DC390 EEPROM, the settings are given in a DC390 BIOS' way.
-
-Here's the syntax:
-tmscsim=AdaptID,SpdIdx,DevMode,AdaptMode,TaggedCmnds,DelayReset
-
-Each of the parameters is a number, containing the described information:
-
-* AdaptID: The SCSI ID of the host adapter. Must be in the range 0..7
- Default is 7.
-
-* SpdIdx: The index of the maximum speed as in the DC390 BIOS. The values
- 0..7 mean 10, 8.0, 6.7, 5.7, 5.0, 4.0, 3.1 and 2 MHz resp. Default is
- 0 (10.0 MHz).
-
-* DevMode is a bit mapped value describing the per-device features. It
- applies to all devices. (Sync, Disc and TagQ will only apply, if the
- device supports it.) The meaning of the bits (* = default):
-
- Bit Val(hex) Val(dec) Meaning
- *0 0x01 1 Parity check
- *1 0x02 2 Synchronous Negotiation
- *2 0x04 4 Disconnection
- *3 0x08 8 Send Start command on startup. (Not used)
- *4 0x10 16 Tagged Command Queueing
-
- As usual, the desired value is obtained by adding the wanted values. If
- you want to enable all values, e.g., you would use 31(0x1f). Default is 31.
-
-* AdaptMode is a bit mapped value describing the enabled adapter features.
-
- Bit Val(hex) Val(dec) Meaning
- *0 0x01 1 Support more than two drives. (Not used)
- *1 0x02 2 Use DOS compatible mapping for HDs greater than 1GB.
- *2 0x04 4 Reset SCSI Bus on startup.
- *3 0x08 8 Active Negation: Improves SCSI Bus noise immunity.
- 4 0x10 16 Immediate return on BIOS seek command. (Not used)
- (*)5 0x20 32 Check for LUNs >= 1.
-
-* TaggedCmnds is a number indicating the maximum number of Tagged Commands.
- It is the binary logarithm - 1 of the actual number. Max is 4 (32).
- Value Number of Tagged Commands
- 0 2
- 1 4
- 2 8
- *3 16
- 4 32
-
-* DelayReset is the time in seconds (minus 0.5s), the adapter waits, after a
- bus reset. Default is 1 (corresp. to 1.5s).
-
-Example:
- modprobe tmscsim tmscsim=6,2,31
-would set the adapter ID to 6, max. speed to 6.7 MHz, enable all device
-features and leave the adapter features, the number of Tagged Commands
-and the Delay after a reset to the defaults.
-
-As you can see, you don't need to specify all of the six params.
-If you want values to be ignored (i.e. the EEprom settings or the defaults
-will be used), you may pass -2 (not 0!) at the corresponding position.
-
-The defaults (7,0,31,15,3,1) are aggressive to allow good performance. You
-can use tmscsim=7,0,31,63,4,0 for maximum performance, if your SCSI chain
-allows it. If you meet problems, you can use tmscsim=-1 which is a shortcut
-for tmscsim=7,4,9,15,2,10.
-
-
-6. Potential improvements
--------------------------
-Most of the intended work on the driver has been done. Here are a few ideas
-to further improve its usability:
-
-* Cleanly separate per-Target and per-LUN properties (DCB)
-* More intelligent abort() routine
-* Use new_eh code (Linux-2.1+)
-* Have the mid-level (ML) code (and not the driver) handle more of the
- various conditions.
-* Command queueing in the driver: Eliminate Query list and use ML instead.
-* More user friendly boot/module param syntax
-
-Further investigation on these problems:
-
-* Driver hangs with sync readcdda (xcdroast) (most probably VIA PCI error)
-
-Known problems:
-Please see http://www.garloff.de/kurt/linux/dc390/problems.html
-
-* Changing the parameters of multi-lun by the tmscsim/? interface will
- cause problems, cause these settings are mostly per Target and not per LUN
- and should be updated accordingly. To be fixed for 2.0d24.
-* CDRs (eg Yam CRW4416) not recognized, because some buggy devices don't
- recover from a SCSI reset in time. Use a higher delay or don't issue
- a SCSI bus reset on driver initialization. See problems page.
- For the CRW4416S, this seems to be solved with firmware 1.0g (reported by
- Jean-Yves Barbier).
-* TEAC CD-532S not being recognized. (Works with 1.11).
-* Scanners (eg. Astra UMAX 1220S) don't work: Disable Sync Negotiation.
- If this does not help, try echo "INQUIRY t" >/proc/scsi/tmscsim/? (t
- replaced by the dev index of your scanner). You may try to reset your SCSI
- bus afterwards (echo "RESET" >/proc/scsi/tmscsim/?).
- The problem seems to be solved as of 2.0d18, thanks to Andreas Rick.
-* If there is a valid partition table, the driver will use it for determining
- the mapping. If there's none, a reasonable mapping (Symbios-like) will be
- assumed. Other operating systems may not like this mapping, though
- it's consistent with the BIOS' behaviour. Old DC390 drivers ignored the
- partition table and used a H/S = 64/32 or 255/63 translation. So if you
- want to be compatible to those, use this old mapping when creating
- partition tables. Even worse, on bootup the DC390 might complain if other
- mappings are found, so auto rebooting may fail.
-* In some situations, the driver will get stuck in an abort loop. This is a
- bad interaction between the Mid-Layer of Linux' SCSI code and the driver.
- Try to disable DsCn, if you meet this problem. Please contact me for
- further debugging.
-
-
-7. Bug reports, debugging and updates
--------------------------------------
-Whenever you have problems with the driver, you are invited to ask the
-author for help. However, I'd suggest reading the docs and trying to solve
-the problem yourself, first.
-If you find something, which you believe to be a bug, please report it to me.
-Please append the output of /proc/scsi/scsi, /proc/scsi/tmscsim/? and
-maybe the DC390 log messages to the report.
-
-Bug reports should be send to me (Kurt Garloff <dc390@garloff.de>) as well
-as to the linux-scsi list (<linux-scsi@vger.kernel.org>), as sometimes bugs
-are caused by the SCSI mid-level code.
-
-I will ask you for some more details and probably I will also ask you to
-enable some of the DEBUG options in the driver (tmscsim.c:DC390_DEBUGXXX
-defines). The driver will produce some data for the syslog facility then.
-Beware: If your syslog gets written to a SCSI disk connected to your
-AM53C974, the logging might produce log output again, and you might end
-having your box spending most of its time doing the logging.
-
-The latest version of the driver can be found at:
- http://www.garloff.de/kurt/linux/dc390/
- ftp://ftp.suse.com/pub/people/garloff/linux/dc390/
-
-
-8. Acknowledgements
--------------------
-Thanks to Linus Torvalds, Alan Cox, the FSF people, the XFree86 team and
-all the others for the wonderful OS and software.
-Thanks to C.L. Huang and Philip Giang (Tekram) for the initial driver
-release and support.
-Thanks to Doug Ledford, Gérard Roudier for support with SCSI coding.
-Thanks to a lot of people (espec. Chiaki Ishikawa, Andreas Haumer, Hubert
-Tonneau) for intensively testing the driver (and even risking data loss
-doing this during early revisions).
-Recently, SuSE GmbH, Nuernberg, FRG, has been paying me for the driver
-development and maintenance. Special thanks!
-
-
-9. Copyright
-------------
- This driver is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; version 2 of the License.
- If you want to use any later version of the GNU GPL, you will probably
- be allowed to, but you have to ask me and Tekram <erich@tekram.com.tw>
- before.
-
--------------------------------------------------------------------------
-Written by Kurt Garloff <kurt@garloff.de> 1998/06/11
-Last updated 2000/11/28, driver revision 2.0e7
-$Id: README.tmscsim,v 2.25.2.7 2000/12/20 01:07:12 garloff Exp $
diff --git a/MAINTAINERS b/MAINTAINERS
index d95925d4e1f7..8133e97980f1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4971,12 +4971,6 @@ T: git git://linuxtv.org/anttip/media_tree.git
S: Maintained
F: drivers/media/tuners/e4000*
-EATA ISA/EISA/PCI SCSI DRIVER
-M: Dario Ballabio <ballabio_dario@emc.com>
-L: linux-scsi@vger.kernel.org
-S: Maintained
-F: drivers/scsi/eata.c
-
EC100 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
L: linux-media@vger.kernel.org
@@ -5812,12 +5806,6 @@ F: tools/testing/selftests/futex/
F: tools/perf/bench/futex*
F: Documentation/*futex*
-FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
-M: Rik Faith <faith@cs.unc.edu>
-L: linux-scsi@vger.kernel.org
-S: Odd Fixes (e.g., new signatures)
-F: drivers/scsi/fdomain.*
-
GCC PLUGINS
M: Kees Cook <keescook@chromium.org>
R: Emese Revfy <re.emese@gmail.com>
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 4bb832a41d55..6c1196b0f81e 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -184,7 +184,6 @@ CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_SAS=m
-CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 8a739b74cfb7..11e89e56b865 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -640,88 +640,6 @@ config SCSI_DMX3191D
To compile this driver as a module, choose M here: the
module will be called dmx3191d.
-config SCSI_EATA
- tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
- depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
- ---help---
- This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
- ISA and all EISA I/O addresses are probed looking for the "EATA"
- signature. The addresses of all the PCI SCSI controllers reported
- by the PCI subsystem are probed as well.
-
- You want to read the start of <file:drivers/scsi/eata.c> and the
- SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the
- module will be called eata.
-
-config SCSI_EATA_TAGGED_QUEUE
- bool "enable tagged command queueing"
- depends on SCSI_EATA
- help
- This is a feature of SCSI-2 which improves performance: the host
- adapter can send several SCSI commands to a device's queue even if
- previous commands haven't finished yet.
- This is equivalent to the "eata=tc:y" boot option.
-
-config SCSI_EATA_LINKED_COMMANDS
- bool "enable elevator sorting"
- depends on SCSI_EATA
- help
- This option enables elevator sorting for all probed SCSI disks and
- CD-ROMs. It definitely reduces the average seek distance when doing
- random seeks, but this does not necessarily result in a noticeable
- performance improvement: your mileage may vary...
- This is equivalent to the "eata=lc:y" boot option.
-
-config SCSI_EATA_MAX_TAGS
- int "maximum number of queued commands"
- depends on SCSI_EATA
- default "16"
- help
- This specifies how many SCSI commands can be maximally queued for
- each probed SCSI device. You should reduce the default value of 16
- only if you have disks with buggy or limited tagged command support.
- Minimum is 2 and maximum is 62. This value is also the window size
- used by the elevator sorting option above. The effective value used
- by the driver for each probed SCSI device is reported at boot time.
- This is equivalent to the "eata=mq:8" boot option.
-
-config SCSI_EATA_PIO
- tristate "EATA-PIO (old DPT PM2001, PM2012A) support"
- depends on (ISA || EISA || PCI) && SCSI && BROKEN
- ---help---
- This driver supports all EATA-PIO protocol compliant SCSI Host
- Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant
- host adapters could also use this driver but are discouraged from
- doing so, since this driver only supports hard disks and lacks
- numerous features. You might want to have a look at the SCSI-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the
- module will be called eata_pio.
-
-config SCSI_FUTURE_DOMAIN
- tristate "Future Domain 16xx SCSI/AHA-2920A support"
- depends on (ISA || PCI) && SCSI
- select CHECK_SIGNATURE
- ---help---
- This is support for Future Domain's 16-bit SCSI host adapters
- (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
- other adapters based on the Future Domain chipsets (Quantum
- ISA-200S, ISA-250MG; Adaptec AHA-2920A; and at least one IBM board).
- It is explained in section 3.7 of the SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip
- and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
- controller support"). This Future Domain driver works with the older
- Adaptec AHA-2920A boards with a Future Domain chip on them.
-
- To compile this driver as a module, choose M here: the
- module will be called fdomain.
-
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
@@ -923,18 +841,6 @@ config SCSI_IZIP_SLOW_CTR
Generally, saying N is fine.
-config SCSI_NCR53C406A
- tristate "NCR53c406a SCSI support"
- depends on ISA && SCSI
- help
- This is support for the NCR53c406a SCSI host adapter. For user
- configurable parameters, check out <file:drivers/scsi/NCR53c406a.c>
- in the kernel source. Also read the SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the
- module will be called NCR53c406.
-
config SCSI_NCR_D700
tristate "NCR Dual 700 MCA SCSI support"
depends on MCA && SCSI
@@ -1059,6 +965,7 @@ config SCSI_IPR
depends on PCI && SCSI && ATA
select FW_LOADER
select IRQ_POLL
+ select SGL_ALLOC
---help---
This driver supports the IBM Power Linux family RAID adapters.
This includes IBM pSeries 5712, 5703, 5709, and 570A, as well
@@ -1265,24 +1172,6 @@ config SCSI_SIM710
It currently supports Compaq EISA cards and NCR MCA cards
-config SCSI_SYM53C416
- tristate "Symbios 53c416 SCSI support"
- depends on ISA && SCSI
- ---help---
- This is support for the sym53c416 SCSI host adapter, the SCSI
- adapter that comes with some HP scanners. This driver requires that
- the sym53c416 is configured first using some sort of PnP
- configuration program (e.g. isapnp) or by a PnP aware BIOS. If you
- are using isapnp then you need to compile this driver as a module
- and then load it using insmod after isapnp has run. The parameters
- of the configured card(s) should be passed to the driver. The format
- is:
-
- insmod sym53c416 sym53c416=<base>,<irq> [sym53c416_1=<base>,<irq>]
-
- To compile this driver as a module, choose M here: the
- module will be called sym53c416.
-
config SCSI_DC395x
tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
depends on PCI && SCSI
@@ -1576,6 +1465,7 @@ config ZFCP
config SCSI_PMCRAID
tristate "PMC SIERRA Linux MaxRAID adapter support"
depends on PCI && SCSI && NET
+ select SGL_ALLOC
---help---
This driver supports the PMC SIERRA MaxRAID adapters.
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index de1b3fce936d..e29f9b8fd66d 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -74,12 +74,9 @@ obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
obj-$(CONFIG_SCSI_PM8001) += pm8001/
obj-$(CONFIG_SCSI_ISCI) += isci/
obj-$(CONFIG_SCSI_IPS) += ips.o
-obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
-obj-$(CONFIG_SCSI_NCR53C406A) += NCR53c406a.o
obj-$(CONFIG_SCSI_NCR_D700) += 53c700.o NCR_D700.o
obj-$(CONFIG_SCSI_NCR_Q720) += NCR_Q720_mod.o
-obj-$(CONFIG_SCSI_SYM53C416) += sym53c416.o
obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o
@@ -93,8 +90,6 @@ obj-$(CONFIG_SCSI_HPSA) += hpsa.o
obj-$(CONFIG_SCSI_SMARTPQI) += smartpqi/
obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/
obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o
-obj-$(CONFIG_SCSI_EATA_PIO) += eata_pio.o
-obj-$(CONFIG_SCSI_EATA) += eata.o
obj-$(CONFIG_SCSI_DC395x) += dc395x.o
obj-$(CONFIG_SCSI_AM53C974) += esp_scsi.o am53c974.o
obj-$(CONFIG_CXLFLASH) += cxlflash/
diff --git a/drivers/scsi/NCR53c406a.c b/drivers/scsi/NCR53c406a.c
deleted file mode 100644
index 6e110c630d2c..000000000000
--- a/drivers/scsi/NCR53c406a.c
+++ /dev/null
@@ -1,1090 +0,0 @@
-/*
- * NCR53c406.c
- * Low-level SCSI driver for NCR53c406a chip.
- * Copyright (C) 1994, 1995, 1996 Normunds Saumanis (normunds@fi.ibm.com)
- *
- * LILO command line usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]
- * Specify IRQ = 0 for non-interrupt driven mode.
- * FASTPIO = 1 for fast pio mode, 0 for slow mode.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- */
-
-#define NCR53C406A_DEBUG 0
-#define VERBOSE_NCR53C406A_DEBUG 0
-
-/* Set this to 1 for PIO mode (recommended) or to 0 for DMA mode */
-#define USE_PIO 1
-
-#define USE_BIOS 0
- /* #define BIOS_ADDR 0xD8000 *//* define this if autoprobe fails */
- /* #define PORT_BASE 0x330 *//* define this if autoprobe fails */
- /* #define IRQ_LEV 0 *//* define this if autoprobe fails */
-#define DMA_CHAN 5 /* this is ignored if DMA is disabled */
-
-/* Set this to 0 if you encounter kernel lockups while transferring
- * data in PIO mode */
-#define USE_FAST_PIO 1
-
-/* ============= End of user configurable parameters ============= */
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-
-#include <linux/blkdev.h>
-#include <linux/spinlock.h>
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-
-/* ============================================================= */
-
-#define WATCHDOG 5000000
-
-#define SYNC_MODE 0 /* Synchronous transfer mode */
-
-#ifdef DEBUG
-#undef NCR53C406A_DEBUG
-#define NCR53C406A_DEBUG 1
-#endif
-
-#if USE_PIO
-#define USE_DMA 0
-#else
-#define USE_DMA 1
-#endif
-
-/* Default configuration */
-#define C1_IMG 0x07 /* ID=7 */
-#define C2_IMG 0x48 /* FE SCSI2 */
-#if USE_DMA
-#define C3_IMG 0x21 /* CDB TE */
-#else
-#define C3_IMG 0x20 /* CDB */
-#endif
-#define C4_IMG 0x04 /* ANE */
-#define C5_IMG 0xb6 /* AA PI SIE POL */
-
-#define REG0 (outb(C4_IMG, CONFIG4))
-#define REG1 (outb(C5_IMG, CONFIG5))
-
-#if NCR53C406A_DEBUG
-#define DEB(x) x
-#else
-#define DEB(x)
-#endif
-
-#if VERBOSE_NCR53C406A_DEBUG
-#define VDEB(x) x
-#else
-#define VDEB(x)
-#endif
-
-#define LOAD_DMA_COUNT(count) \
- outb(count & 0xff, TC_LSB); \
- outb((count >> 8) & 0xff, TC_MSB); \
- outb((count >> 16) & 0xff, TC_HIGH);
-
-/* Chip commands */
-#define DMA_OP 0x80
-
-#define SCSI_NOP 0x00
-#define FLUSH_FIFO 0x01
-#define CHIP_RESET 0x02
-#define SCSI_RESET 0x03
-#define RESELECT 0x40
-#define SELECT_NO_ATN 0x41
-#define SELECT_ATN 0x42
-#define SELECT_ATN_STOP 0x43
-#define ENABLE_SEL 0x44
-#define DISABLE_SEL 0x45
-#define SELECT_ATN3 0x46
-#define RESELECT3 0x47
-#define TRANSFER_INFO 0x10
-#define INIT_CMD_COMPLETE 0x11
-#define MSG_ACCEPT 0x12
-#define TRANSFER_PAD 0x18
-#define SET_ATN 0x1a
-#define RESET_ATN 0x1b
-#define SEND_MSG 0x20
-#define SEND_STATUS 0x21
-#define SEND_DATA 0x22
-#define DISCONN_SEQ 0x23
-#define TERMINATE_SEQ 0x24
-#define TARG_CMD_COMPLETE 0x25
-#define DISCONN 0x27
-#define RECV_MSG 0x28
-#define RECV_CMD 0x29
-#define RECV_DATA 0x2a
-#define RECV_CMD_SEQ 0x2b
-#define TARGET_ABORT_DMA 0x04
-
-/*----------------------------------------------------------------*/
-/* the following will set the monitor border color (useful to find
- where something crashed or gets stuck at */
-/* 1 = blue
- 2 = green
- 3 = cyan
- 4 = red
- 5 = magenta
- 6 = yellow
- 7 = white
-*/
-
-#if NCR53C406A_DEBUG
-#define rtrc(i) {inb(0x3da);outb(0x31,0x3c0);outb((i),0x3c0);}
-#else
-#define rtrc(i) {}
-#endif
-/*----------------------------------------------------------------*/
-
-enum Phase {
- idle,
- data_out,
- data_in,
- command_ph,
- status_ph,
- message_out,
- message_in
-};
-
-/* Static function prototypes */
-static void NCR53c406a_intr(void *);
-static irqreturn_t do_NCR53c406a_intr(int, void *);
-static void chip_init(void);
-static void calc_port_addr(void);
-#ifndef IRQ_LEV
-static int irq_probe(void);
-#endif
-
-/* ================================================================= */
-
-#if USE_BIOS
-static void *bios_base;
-#endif
-
-#ifdef PORT_BASE
-static int port_base = PORT_BASE;
-#else
-static int port_base;
-#endif
-
-#ifdef IRQ_LEV
-static int irq_level = IRQ_LEV;
-#else
-static int irq_level = -1; /* 0 is 'no irq', so use -1 for 'uninitialized' */
-#endif
-
-#if USE_DMA
-static int dma_chan;
-#endif
-
-#if USE_PIO
-static int fast_pio = USE_FAST_PIO;
-#endif
-
-static Scsi_Cmnd *current_SC;
-static char info_msg[256];
-
-/* ================================================================= */
-
-/* possible BIOS locations */
-#if USE_BIOS
-static void *addresses[] = {
- (void *) 0xd8000,
- (void *) 0xc8000
-};
-#define ADDRESS_COUNT ARRAY_SIZE(addresses)
-#endif /* USE_BIOS */
-
-/* possible i/o port addresses */
-static unsigned short ports[] = { 0x230, 0x330, 0x280, 0x290, 0x330, 0x340, 0x300, 0x310, 0x348, 0x350 };
-#define PORT_COUNT ARRAY_SIZE(ports)
-
-#ifndef MODULE
-/* possible interrupt channels */
-static unsigned short intrs[] = { 10, 11, 12, 15 };
-#define INTR_COUNT ARRAY_SIZE(intrs)
-#endif /* !MODULE */
-
-/* signatures for NCR 53c406a based controllers */
-#if USE_BIOS
-struct signature {
- char *signature;
- int sig_offset;
- int sig_length;
-} signatures[] __initdata = {
- /* 1 2 3 4 5 6 */
- /* 123456789012345678901234567890123456789012345678901234567890 */
- {
-"Copyright (C) Acculogic, Inc.\r\n2.8M Diskette Extension Bios ver 4.04.03 03/01/1993", 61, 82},};
-
-#define SIGNATURE_COUNT ARRAY_SIZE(signatures)
-#endif /* USE_BIOS */
-
-/* ============================================================ */
-
-/* Control Register Set 0 */
-static int TC_LSB; /* transfer counter lsb */
-static int TC_MSB; /* transfer counter msb */
-static int SCSI_FIFO; /* scsi fifo register */
-static int CMD_REG; /* command register */
-static int STAT_REG; /* status register */
-static int DEST_ID; /* selection/reselection bus id */
-static int INT_REG; /* interrupt status register */
-static int SRTIMOUT; /* select/reselect timeout reg */
-static int SEQ_REG; /* sequence step register */
-static int SYNCPRD; /* synchronous transfer period */
-static int FIFO_FLAGS; /* indicates # of bytes in fifo */
-static int SYNCOFF; /* synchronous offset register */
-static int CONFIG1; /* configuration register */
-static int CLKCONV; /* clock conversion reg */
- /*static int TESTREG;*//* test mode register */
-static int CONFIG2; /* Configuration 2 Register */
-static int CONFIG3; /* Configuration 3 Register */
-static int CONFIG4; /* Configuration 4 Register */
-static int TC_HIGH; /* Transfer Counter High */
- /*static int FIFO_BOTTOM;*//* Reserve FIFO byte register */
-
-/* Control Register Set 1 */
- /*static int JUMPER_SENSE;*//* Jumper sense port reg (r/w) */
- /*static int SRAM_PTR;*//* SRAM address pointer reg (r/w) */
- /*static int SRAM_DATA;*//* SRAM data register (r/w) */
-static int PIO_FIFO; /* PIO FIFO registers (r/w) */
- /*static int PIO_FIFO1;*//* */
- /*static int PIO_FIFO2;*//* */
- /*static int PIO_FIFO3;*//* */
-static int PIO_STATUS; /* PIO status (r/w) */
- /*static int ATA_CMD;*//* ATA command/status reg (r/w) */
- /*static int ATA_ERR;*//* ATA features/error register (r/w) */
-static int PIO_FLAG; /* PIO flag interrupt enable (r/w) */
-static int CONFIG5; /* Configuration 5 register (r/w) */
- /*static int SIGNATURE;*//* Signature Register (r) */
- /*static int CONFIG6;*//* Configuration 6 register (r) */
-
-/* ============================================================== */
-
-#if USE_DMA
-static __inline__ int NCR53c406a_dma_setup(unsigned char *ptr, unsigned int count, unsigned char mode)
-{
- unsigned limit;
- unsigned long flags = 0;
-
- VDEB(printk("dma: before count=%d ", count));
- if (dma_chan <= 3) {
- if (count > 65536)
- count = 65536;
- limit = 65536 - (((unsigned) ptr) & 0xFFFF);
- } else {
- if (count > (65536 << 1))
- count = (65536 << 1);
- limit = (65536 << 1) - (((unsigned) ptr) & 0x1FFFF);
- }
-
- if (count > limit)
- count = limit;
-
- VDEB(printk("after count=%d\n", count));
- if ((count & 1) || (((unsigned) ptr) & 1))
- panic("NCR53c406a: attempted unaligned DMA transfer\n");
-
- flags = claim_dma_lock();
- disable_dma(dma_chan);
- clear_dma_ff(dma_chan);
- set_dma_addr(dma_chan, (long) ptr);
- set_dma_count(dma_chan, count);
- set_dma_mode(dma_chan, mode);
- enable_dma(dma_chan);
- release_dma_lock(flags);
-
- return count;
-}
-
-static __inline__ int NCR53c406a_dma_write(unsigned char *src, unsigned int count)
-{
- return NCR53c406a_dma_setup(src, count, DMA_MODE_WRITE);
-}
-
-static __inline__ int NCR53c406a_dma_read(unsigned char *src, unsigned int count)
-{
- return NCR53c406a_dma_setup(src, count, DMA_MODE_READ);
-}
-
-static __inline__ int NCR53c406a_dma_residual(void)
-{
- register int tmp;
- unsigned long flags;
-
- flags = claim_dma_lock();
- clear_dma_ff(dma_chan);
- tmp = get_dma_residue(dma_chan);
- release_dma_lock(flags);
-
- return tmp;
-}
-#endif /* USE_DMA */
-
-#if USE_PIO
-static __inline__ int NCR53c406a_pio_read(unsigned char *request, unsigned int reqlen)
-{
- int i;
- int len; /* current scsi fifo size */
-
- REG1;
- while (reqlen) {
- i = inb(PIO_STATUS);
- /* VDEB(printk("pio_status=%x\n", i)); */
- if (i & 0x80)
- return 0;
-
- switch (i & 0x1e) {
- default:
- case 0x10:
- len = 0;
- break;
- case 0x0:
- len = 1;
- break;
- case 0x8:
- len = 42;
- break;
- case 0xc:
- len = 84;
- break;
- case 0xe:
- len = 128;
- break;
- }
-
- if ((i & 0x40) && len == 0) { /* fifo empty and interrupt occurred */
- return 0;
- }
-
- if (len) {
- if (len > reqlen)
- len = reqlen;
-
- if (fast_pio && len > 3) {
- insl(PIO_FIFO, request, len >> 2);
- request += len & 0xfc;
- reqlen -= len & 0xfc;
- } else {
- while (len--) {
- *request++ = inb(PIO_FIFO);
- reqlen--;
- }
- }
- }
- }
- return 0;
-}
-
-static __inline__ int NCR53c406a_pio_write(unsigned char *request, unsigned int reqlen)
-{
- int i = 0;
- int len; /* current scsi fifo size */
-
- REG1;
- while (reqlen && !(i & 0x40)) {
- i = inb(PIO_STATUS);
- /* VDEB(printk("pio_status=%x\n", i)); */
- if (i & 0x80) /* error */
- return 0;
-
- switch (i & 0x1e) {
- case 0x10:
- len = 128;
- break;
- case 0x0:
- len = 84;
- break;
- case 0x8:
- len = 42;
- break;
- case 0xc:
- len = 1;
- break;
- default:
- case 0xe:
- len = 0;
- break;
- }
-
- if (len) {
- if (len > reqlen)
- len = reqlen;
-
- if (fast_pio && len > 3) {
- outsl(PIO_FIFO, request, len >> 2);
- request += len & 0xfc;
- reqlen -= len & 0xfc;
- } else {
- while (len--) {
- outb(*request++, PIO_FIFO);
- reqlen--;
- }
- }
- }
- }
- return 0;
-}
-#endif /* USE_PIO */
-
-static int __init NCR53c406a_detect(struct scsi_host_template * tpnt)
-{
- int present = 0;
- struct Scsi_Host *shpnt = NULL;
-#ifndef PORT_BASE
- int i;
-#endif
-
-#if USE_BIOS
- int ii, jj;
- bios_base = 0;
- /* look for a valid signature */
- for (ii = 0; ii < ADDRESS_COUNT && !bios_base; ii++)
- for (jj = 0; (jj < SIGNATURE_COUNT) && !bios_base; jj++)
- if (!memcmp((void *) addresses[ii] + signatures[jj].sig_offset, (void *) signatures[jj].signature, (int) signatures[jj].sig_length))
- bios_base = addresses[ii];
-
- if (!bios_base) {
- printk("NCR53c406a: BIOS signature not found\n");
- return 0;
- }
-
- DEB(printk("NCR53c406a BIOS found at 0x%x\n", (unsigned int) bios_base);
- );
-#endif /* USE_BIOS */
-
-#ifdef PORT_BASE
- if (!request_region(port_base, 0x10, "NCR53c406a")) /* ports already snatched */
- port_base = 0;
-
-#else /* autodetect */
- if (port_base) { /* LILO override */
- if (!request_region(port_base, 0x10, "NCR53c406a"))
- port_base = 0;
- } else {
- for (i = 0; i < PORT_COUNT && !port_base; i++) {
- if (!request_region(ports[i], 0x10, "NCR53c406a")) {
- DEB(printk("NCR53c406a: port 0x%x in use\n", ports[i]));
- } else {
- VDEB(printk("NCR53c406a: port 0x%x available\n", ports[i]));
- outb(C5_IMG, ports[i] + 0x0d); /* reg set 1 */
- if ((inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) & 0xf8) == 0x58) {
- port_base = ports[i];
- VDEB(printk("NCR53c406a: Sig register valid\n"));
- VDEB(printk("port_base=0x%x\n", port_base));
- break;
- }
- release_region(ports[i], 0x10);
- }
- }
- }
-#endif /* PORT_BASE */
-
- if (!port_base) { /* no ports found */
- printk("NCR53c406a: no available ports found\n");
- return 0;
- }
-
- DEB(printk("NCR53c406a detected\n"));
-
- calc_port_addr();
- chip_init();
-
-#ifndef IRQ_LEV
- if (irq_level < 0) { /* LILO override if >= 0 */
- irq_level = irq_probe();
- if (irq_level < 0) { /* Trouble */
- printk("NCR53c406a: IRQ problem, irq_level=%d, giving up\n", irq_level);
- goto err_release;
- }
- }
-#endif
-
- DEB(printk("NCR53c406a: using port_base 0x%x\n", port_base));
-
- present = 1;
- tpnt->proc_name = "NCR53c406a";
-
- shpnt = scsi_register(tpnt, 0);
- if (!shpnt) {
- printk("NCR53c406a: Unable to register host, giving up.\n");
- goto err_release;
- }
-
- if (irq_level > 0) {
- if (request_irq(irq_level, do_NCR53c406a_intr, 0, "NCR53c406a", shpnt)) {
- printk("NCR53c406a: unable to allocate IRQ %d\n", irq_level);
- goto err_free_scsi;
- }
- tpnt->can_queue = 1;
- DEB(printk("NCR53c406a: allocated IRQ %d\n", irq_level));
- } else if (irq_level == 0) {
- tpnt->can_queue = 0;
- DEB(printk("NCR53c406a: No interrupts detected\n"));
- printk("NCR53c406a driver no longer supports polling interface\n");
- printk("Please email linux-scsi@vger.kernel.org\n");
-
-#if USE_DMA
- printk("NCR53c406a: No interrupts found and DMA mode defined. Giving up.\n");
-#endif /* USE_DMA */
- goto err_free_scsi;
- } else {
- DEB(printk("NCR53c406a: Shouldn't get here!\n"));
- goto err_free_scsi;
- }
-
-#if USE_DMA
- dma_chan = DMA_CHAN;
- if (request_dma(dma_chan, "NCR53c406a") != 0) {
- printk("NCR53c406a: unable to allocate DMA channel %d\n", dma_chan);
- goto err_free_irq;
- }
-
- DEB(printk("Allocated DMA channel %d\n", dma_chan));
-#endif /* USE_DMA */
-
- shpnt->irq = irq_level;
- shpnt->io_port = port_base;
- shpnt->n_io_port = 0x10;
-#if USE_DMA
- shpnt->dma = dma_chan;
-#endif
-
-#if USE_DMA
- sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, DMA channel %d.", port_base, irq_level, dma_chan);
-#else
- sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, %s PIO mode.", port_base, irq_level, fast_pio ? "fast" : "slow");
-#endif
-
- return (present);
-
-#if USE_DMA
- err_free_irq:
- if (irq_level)
- free_irq(irq_level, shpnt);
-#endif
- err_free_scsi:
- scsi_unregister(shpnt);
- err_release:
- release_region(port_base, 0x10);
- return 0;
-}
-
-static int NCR53c406a_release(struct Scsi_Host *shost)
-{
- if (shost->irq)
- free_irq(shost->irq, NULL);
-#if USE_DMA
- if (shost->dma_channel != 0xff)
- free_dma(shost->dma_channel);
-#endif
- if (shost->io_port && shost->n_io_port)
- release_region(shost->io_port, shost->n_io_port);
-
- scsi_unregister(shost);
- return 0;
-}
-
-#ifndef MODULE
-/* called from init/main.c */
-static int __init NCR53c406a_setup(char *str)
-{
- static size_t setup_idx = 0;
- size_t i;
- int ints[4];
-
- DEB(printk("NCR53c406a: Setup called\n");
- );
-
- if (setup_idx >= PORT_COUNT - 1) {
- printk("NCR53c406a: Setup called too many times. Bad LILO params?\n");
- return 0;
- }
- get_options(str, 4, ints);
- if (ints[0] < 1 || ints[0] > 3) {
- printk("NCR53c406a: Malformed command line\n");
- printk("NCR53c406a: Usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]\n");
- return 0;
- }
- for (i = 0; i < PORT_COUNT && !port_base; i++)
- if (ports[i] == ints[1]) {
- port_base = ints[1];
- DEB(printk("NCR53c406a: Specified port_base 0x%x\n", port_base);
- )
- }
- if (!port_base) {
- printk("NCR53c406a: Invalid PORTBASE 0x%x specified\n", ints[1]);
- return 0;
- }
-
- if (ints[0] > 1) {
- if (ints[2] == 0) {
- irq_level = 0;
- DEB(printk("NCR53c406a: Specified irq %d\n", irq_level);
- )
- } else
- for (i = 0; i < INTR_COUNT && irq_level < 0; i++)
- if (intrs[i] == ints[2]) {
- irq_level = ints[2];
- DEB(printk("NCR53c406a: Specified irq %d\n", port_base);
- )
- }
- if (irq_level < 0)
- printk("NCR53c406a: Invalid IRQ %d specified\n", ints[2]);
- }
-
- if (ints[0] > 2)
- fast_pio = ints[3];
-
- DEB(printk("NCR53c406a: port_base=0x%x, irq=%d, fast_pio=%d\n", port_base, irq_level, fast_pio);)
- return 1;
-}
-
-__setup("ncr53c406a=", NCR53c406a_setup);
-
-#endif /* !MODULE */
-
-static const char *NCR53c406a_info(struct Scsi_Host *SChost)
-{
- DEB(printk("NCR53c406a_info called\n"));
- return (info_msg);
-}
-
-#if 0
-static void wait_intr(void)
-{
- unsigned long i = jiffies + WATCHDOG;
-
- while (time_after(i, jiffies) && !(inb(STAT_REG) & 0xe0)) { /* wait for a pseudo-interrupt */
- cpu_relax();
- barrier();
- }
-
- if (time_before_eq(i, jiffies)) { /* Timed out */
- rtrc(0);
- current_SC->result = DID_TIME_OUT << 16;
- current_SC->SCp.phase = idle;
- current_SC->scsi_done(current_SC);
- return;
- }
-
- NCR53c406a_intr(NULL);
-}
-#endif
-
-static int NCR53c406a_queue_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
-{
- int i;
-
- VDEB(printk("NCR53c406a_queue called\n"));
- DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n", SCpnt->cmnd[0], SCpnt->cmd_len, SCpnt->device->target, (u8)SCpnt->device->lun, scsi_bufflen(SCpnt)));
-
-#if 0
- VDEB(for (i = 0; i < SCpnt->cmd_len; i++)
- printk("cmd[%d]=%02x ", i, SCpnt->cmnd[i]));
- VDEB(printk("\n"));
-#endif
-
- current_SC = SCpnt;
- current_SC->scsi_done = done;
- current_SC->SCp.phase = command_ph;
- current_SC->SCp.Status = 0;
- current_SC->SCp.Message = 0;
-
- /* We are locked here already by the mid layer */
- REG0;
- outb(scmd_id(SCpnt), DEST_ID); /* set destination */
- outb(FLUSH_FIFO, CMD_REG); /* reset the fifos */
-
- for (i = 0; i < SCpnt->cmd_len; i++) {
- outb(SCpnt->cmnd[i], SCSI_FIFO);
- }
- outb(SELECT_NO_ATN, CMD_REG);
-
- rtrc(1);
- return 0;
-}
-
-static DEF_SCSI_QCMD(NCR53c406a_queue)
-
-static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt)
-{
- DEB(printk("NCR53c406a_reset called\n"));
-
- spin_lock_irq(SCpnt->device->host->host_lock);
-
- outb(C4_IMG, CONFIG4); /* Select reg set 0 */
- outb(CHIP_RESET, CMD_REG);
- outb(SCSI_NOP, CMD_REG); /* required after reset */
- outb(SCSI_RESET, CMD_REG);
- chip_init();
-
- rtrc(2);
-
- spin_unlock_irq(SCpnt->device->host->host_lock);
-
- return SUCCESS;
-}
-
-static int NCR53c406a_biosparm(struct scsi_device *disk,
- struct block_device *dev,
- sector_t capacity, int *info_array)
-{
- int size;
-
- DEB(printk("NCR53c406a_biosparm called\n"));
-
- size = capacity;
- info_array[0] = 64; /* heads */
- info_array[1] = 32; /* sectors */
- info_array[2] = size >> 11; /* cylinders */
- if (info_array[2] > 1024) { /* big disk */
- info_array[0] = 255;
- info_array[1] = 63;
- info_array[2] = size / (255 * 63);
- }
- return 0;
-}
-
-static irqreturn_t do_NCR53c406a_intr(int unused, void *dev_id)
-{
- unsigned long flags;
- struct Scsi_Host *dev = dev_id;
-
- spin_lock_irqsave(dev->host_lock, flags);
- NCR53c406a_intr(dev_id);
- spin_unlock_irqrestore(dev->host_lock, flags);
- return IRQ_HANDLED;
-}
-
-static void NCR53c406a_intr(void *dev_id)
-{
- DEB(unsigned char fifo_size;
- )
- DEB(unsigned char seq_reg;
- )
- unsigned char status, int_reg;
-#if USE_PIO
- unsigned char pio_status;
- struct scatterlist *sg;
- int i;
-#endif
-
- VDEB(printk("NCR53c406a_intr called\n"));
-
-#if USE_PIO
- REG1;
- pio_status = inb(PIO_STATUS);
-#endif
- REG0;
- status = inb(STAT_REG);
- DEB(seq_reg = inb(SEQ_REG));
- int_reg = inb(INT_REG);
- DEB(fifo_size = inb(FIFO_FLAGS) & 0x1f);
-
-#if NCR53C406A_DEBUG
- printk("status=%02x, seq_reg=%02x, int_reg=%02x, fifo_size=%02x", status, seq_reg, int_reg, fifo_size);
-#if (USE_DMA)
- printk("\n");
-#else
- printk(", pio=%02x\n", pio_status);
-#endif /* USE_DMA */
-#endif /* NCR53C406A_DEBUG */
-
- if (int_reg & 0x80) { /* SCSI reset intr */
- rtrc(3);
- DEB(printk("NCR53c406a: reset intr received\n"));
- current_SC->SCp.phase = idle;
- current_SC->result = DID_RESET << 16;
- current_SC->scsi_done(current_SC);
- return;
- }
-#if USE_PIO
- if (pio_status & 0x80) {
- printk("NCR53C406A: Warning: PIO error!\n");
- current_SC->SCp.phase = idle;
- current_SC->result = DID_ERROR << 16;
- current_SC->scsi_done(current_SC);
- return;
- }
-#endif /* USE_PIO */
-
- if (status & 0x20) { /* Parity error */
- printk("NCR53c406a: Warning: parity error!\n");
- current_SC->SCp.phase = idle;
- current_SC->result = DID_PARITY << 16;
- current_SC->scsi_done(current_SC);
- return;
- }
-
- if (status & 0x40) { /* Gross error */
- printk("NCR53c406a: Warning: gross error!\n");
- current_SC->SCp.phase = idle;
- current_SC->result = DID_ERROR << 16;
- current_SC->scsi_done(current_SC);
- return;
- }
-
- if (int_reg & 0x20) { /* Disconnect */
- DEB(printk("NCR53c406a: disconnect intr received\n"));
- if (current_SC->SCp.phase != message_in) { /* Unexpected disconnect */
- current_SC->result = DID_NO_CONNECT << 16;
- } else { /* Command complete, return status and message */
- current_SC->result = (current_SC->SCp.Status & 0xff)
- | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16);
- }
-
- rtrc(0);
- current_SC->SCp.phase = idle;
- current_SC->scsi_done(current_SC);
- return;
- }
-
- switch (status & 0x07) { /* scsi phase */
- case 0x00: /* DATA-OUT */
- if (int_reg & 0x10) { /* Target requesting info transfer */
- rtrc(5);
- current_SC->SCp.phase = data_out;
- VDEB(printk("NCR53c406a: Data-Out phase\n"));
- outb(FLUSH_FIFO, CMD_REG);
- LOAD_DMA_COUNT(scsi_bufflen(current_SC)); /* Max transfer size */
-#if USE_DMA /* No s/g support for DMA */
- NCR53c406a_dma_write(scsi_sglist(current_SC),
- scsdi_bufflen(current_SC));
-
-#endif /* USE_DMA */
- outb(TRANSFER_INFO | DMA_OP, CMD_REG);
-#if USE_PIO
- scsi_for_each_sg(current_SC, sg, scsi_sg_count(current_SC), i) {
- NCR53c406a_pio_write(sg_virt(sg), sg->length);
- }
- REG0;
-#endif /* USE_PIO */
- }
- break;
-
- case 0x01: /* DATA-IN */
- if (int_reg & 0x10) { /* Target requesting info transfer */
- rtrc(6);
- current_SC->SCp.phase = data_in;
- VDEB(printk("NCR53c406a: Data-In phase\n"));
- outb(FLUSH_FIFO, CMD_REG);
- LOAD_DMA_COUNT(scsi_bufflen(current_SC)); /* Max transfer size */
-#if USE_DMA /* No s/g support for DMA */
- NCR53c406a_dma_read(scsi_sglist(current_SC),
- scsdi_bufflen(current_SC));
-#endif /* USE_DMA */
- outb(TRANSFER_INFO | DMA_OP, CMD_REG);
-#if USE_PIO
- scsi_for_each_sg(current_SC, sg, scsi_sg_count(current_SC), i) {
- NCR53c406a_pio_read(sg_virt(sg), sg->length);
- }
- REG0;
-#endif /* USE_PIO */
- }
- break;
-
- case 0x02: /* COMMAND */
- current_SC->SCp.phase = command_ph;
- printk("NCR53c406a: Warning: Unknown interrupt occurred in command phase!\n");
- break;
-
- case 0x03: /* STATUS */
- rtrc(7);
- current_SC->SCp.phase = status_ph;
- VDEB(printk("NCR53c406a: Status phase\n"));
- outb(FLUSH_FIFO, CMD_REG);
- outb(INIT_CMD_COMPLETE, CMD_REG);
- break;
-
- case 0x04: /* Reserved */
- case 0x05: /* Reserved */
- printk("NCR53c406a: WARNING: Reserved phase!!!\n");
- break;
-
- case 0x06: /* MESSAGE-OUT */
- DEB(printk("NCR53c406a: Message-Out phase\n"));
- current_SC->SCp.phase = message_out;
- outb(SET_ATN, CMD_REG); /* Reject the message */
- outb(MSG_ACCEPT, CMD_REG);
- break;
-
- case 0x07: /* MESSAGE-IN */
- rtrc(4);
- VDEB(printk("NCR53c406a: Message-In phase\n"));
- current_SC->SCp.phase = message_in;
-
- current_SC->SCp.Status = inb(SCSI_FIFO);
- current_SC->SCp.Message = inb(SCSI_FIFO);
-
- VDEB(printk("SCSI FIFO size=%d\n", inb(FIFO_FLAGS) & 0x1f));
- DEB(printk("Status = %02x Message = %02x\n", current_SC->SCp.Status, current_SC->SCp.Message));
-
- if (current_SC->SCp.Message == SAVE_POINTERS || current_SC->SCp.Message == DISCONNECT) {
- outb(SET_ATN, CMD_REG); /* Reject message */
- DEB(printk("Discarding SAVE_POINTERS message\n"));
- }
- outb(MSG_ACCEPT, CMD_REG);
- break;
- }
-}
-
-#ifndef IRQ_LEV
-static int irq_probe(void)
-{
- int irqs, irq;
- unsigned long i;
-
- inb(INT_REG); /* clear the interrupt register */
- irqs = probe_irq_on();
-
- /* Invalid command will cause an interrupt */
- REG0;
- outb(0xff, CMD_REG);
-
- /* Wait for the interrupt to occur */
- i = jiffies + WATCHDOG;
- while (time_after(i, jiffies) && !(inb(STAT_REG) & 0x80))
- barrier();
- if (time_before_eq(i, jiffies)) { /* Timed out, must be hardware trouble */
- probe_irq_off(irqs);
- return -1;
- }
-
- irq = probe_irq_off(irqs);
-
- /* Kick the chip */
- outb(CHIP_RESET, CMD_REG);
- outb(SCSI_NOP, CMD_REG);
- chip_init();
-
- return irq;
-}
-#endif /* IRQ_LEV */
-
-static void chip_init(void)
-{
- REG1;
-#if USE_DMA
- outb(0x00, PIO_STATUS);
-#else /* USE_PIO */
- outb(0x01, PIO_STATUS);
-#endif
- outb(0x00, PIO_FLAG);
-
- outb(C4_IMG, CONFIG4); /* REG0; */
- outb(C3_IMG, CONFIG3);
- outb(C2_IMG, CONFIG2);
- outb(C1_IMG, CONFIG1);
-
- outb(0x05, CLKCONV); /* clock conversion factor */
- outb(0x9C, SRTIMOUT); /* Selection timeout */
- outb(0x05, SYNCPRD); /* Synchronous transfer period */
- outb(SYNC_MODE, SYNCOFF); /* synchronous mode */
-}
-
-static void __init calc_port_addr(void)
-{
- /* Control Register Set 0 */
- TC_LSB = (port_base + 0x00);
- TC_MSB = (port_base + 0x01);
- SCSI_FIFO = (port_base + 0x02);
- CMD_REG = (port_base + 0x03);
- STAT_REG = (port_base + 0x04);
- DEST_ID = (port_base + 0x04);
- INT_REG = (port_base + 0x05);
- SRTIMOUT = (port_base + 0x05);
- SEQ_REG = (port_base + 0x06);
- SYNCPRD = (port_base + 0x06);
- FIFO_FLAGS = (port_base + 0x07);
- SYNCOFF = (port_base + 0x07);
- CONFIG1 = (port_base + 0x08);
- CLKCONV = (port_base + 0x09);
- /* TESTREG = (port_base+0x0A); */
- CONFIG2 = (port_base + 0x0B);
- CONFIG3 = (port_base + 0x0C);
- CONFIG4 = (port_base + 0x0D);
- TC_HIGH = (port_base + 0x0E);
- /* FIFO_BOTTOM = (port_base+0x0F); */
-
- /* Control Register Set 1 */
- /* JUMPER_SENSE = (port_base+0x00); */
- /* SRAM_PTR = (port_base+0x01); */
- /* SRAM_DATA = (port_base+0x02); */
- PIO_FIFO = (port_base + 0x04);
- /* PIO_FIFO1 = (port_base+0x05); */
- /* PIO_FIFO2 = (port_base+0x06); */
- /* PIO_FIFO3 = (port_base+0x07); */
- PIO_STATUS = (port_base + 0x08);
- /* ATA_CMD = (port_base+0x09); */
- /* ATA_ERR = (port_base+0x0A); */
- PIO_FLAG = (port_base + 0x0B);
- CONFIG5 = (port_base + 0x0D);
- /* SIGNATURE = (port_base+0x0E); */
- /* CONFIG6 = (port_base+0x0F); */
-}
-
-MODULE_LICENSE("GPL");
-
-/* NOTE: scatter-gather support only works in PIO mode.
- * Use SG_NONE if DMA mode is enabled!
- */
-
-static struct scsi_host_template driver_template =
-{
- .proc_name = "NCR53c406a" /* proc_name */,
- .name = "NCR53c406a" /* name */,
- .detect = NCR53c406a_detect /* detect */,
- .release = NCR53c406a_release,
- .info = NCR53c406a_info /* info */,
- .queuecommand = NCR53c406a_queue /* queuecommand */,
- .eh_host_reset_handler = NCR53c406a_host_reset /* reset */,
- .bios_param = NCR53c406a_biosparm /* biosparm */,
- .can_queue = 1 /* can_queue */,
- .this_id = 7 /* SCSI ID of the chip */,
- .sg_tablesize = 32 /*SG_ALL*/ /*SG_NONE*/,
- .unchecked_isa_dma = 1 /* unchecked_isa_dma */,
- .use_clustering = ENABLE_CLUSTERING,
-};
-
-#include "scsi_module.c"
-
-/*
- * Overrides for Emacs so that we get a uniform tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * indent-tabs-mode: nil
- * tab-width: 8
- * End:
- */
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 0095fcbd1c88..29bf1e60f542 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1231,6 +1231,7 @@ struct src_registers {
#define SRC_ODR_SHIFT 12
#define SRC_IDR_SHIFT 9
+#define SRC_MSI_READ_MASK 0x1000
typedef void (*fib_callback)(void *ctxt, struct fib *fibctx);
@@ -1528,6 +1529,7 @@ struct aac_bus_info_response {
#define AAC_COMM_MESSAGE_TYPE3 5
#define AAC_EXTOPT_SA_FIRMWARE cpu_to_le32(1<<1)
+#define AAC_EXTOPT_SOFT_RESET cpu_to_le32(1<<16)
/* MSIX context */
struct aac_msix_ctx {
@@ -1662,6 +1664,7 @@ struct aac_dev
u8 raw_io_64;
u8 printf_enabled;
u8 in_reset;
+ u8 in_soft_reset;
u8 msi;
u8 sa_firmware;
int management_fib_count;
@@ -2504,6 +2507,7 @@ struct aac_hba_info {
#define RCV_TEMP_READINGS 0x00000025
#define GET_COMM_PREFERRED_SETTINGS 0x00000026
#define IOP_RESET_FW_FIB_DUMP 0x00000034
+#define DROP_IO 0x00000035
#define IOP_RESET 0x00001000
#define IOP_RESET_ALWAYS 0x00001001
#define RE_INIT_ADAPTER 0x000000ee
@@ -2539,6 +2543,7 @@ struct aac_hba_info {
#define FLASH_UPD_PENDING 0x00002000
#define FLASH_UPD_SUCCESS 0x00004000
#define FLASH_UPD_FAILED 0x00008000
+#define INVALID_OMR 0xffffffff
#define FWUPD_TIMEOUT (5 * 60)
/*
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index a802bddf04aa..4ebb35a29caa 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -255,7 +255,8 @@ static int src_sync_cmd(struct aac_dev *dev, u32 command,
*/
src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT);
- if (!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) {
+ if ((!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) &&
+ !dev->in_soft_reset) {
ok = 0;
start = jiffies;
@@ -679,6 +680,25 @@ void aac_set_intx_mode(struct aac_dev *dev)
}
}
+static void aac_clear_omr(struct aac_dev *dev)
+{
+ u32 omr_value = 0;
+
+ omr_value = src_readl(dev, MUnit.OMR);
+
+ /*
+ * Check for PCI Errors or Kernel Panic
+ */
+ if ((omr_value == INVALID_OMR) || (omr_value & KERNEL_PANIC))
+ omr_value = 0;
+
+ /*
+ * Preserve MSIX Value if any
+ */
+ src_writel(dev, MUnit.OMR, omr_value & AAC_INT_MODE_MSIX);
+ src_readl(dev, MUnit.OMR);
+}
+
static void aac_dump_fw_fib_iop_reset(struct aac_dev *dev)
{
__le32 supported_options3;
@@ -739,6 +759,8 @@ static void aac_send_iop_reset(struct aac_dev *dev)
aac_set_intx_mode(dev);
+ aac_clear_omr(dev);
+
src_writel(dev, MUnit.IDR, IOP_SRC_RESET_MASK);
msleep(5000);
@@ -748,6 +770,7 @@ static void aac_send_hardware_soft_reset(struct aac_dev *dev)
{
u_int32_t val;
+ aac_clear_omr(dev);
val = readl(((char *)(dev->base) + IBW_SWR_OFFSET));
val |= 0x01;
writel(val, ((char *)(dev->base) + IBW_SWR_OFFSET));
@@ -992,6 +1015,148 @@ error_iounmap:
return -1;
}
+static int aac_src_wait_sync(struct aac_dev *dev, int *status)
+{
+ unsigned long start = jiffies;
+ unsigned long usecs = 0;
+ int delay = 5 * HZ;
+ int rc = 1;
+
+ while (time_before(jiffies, start+delay)) {
+ /*
+ * Delay 5 microseconds to let Mon960 get info.
+ */
+ udelay(5);
+
+ /*
+ * Mon960 will set doorbell0 bit when it has completed the
+ * command.
+ */
+ if (aac_src_get_sync_status(dev) & OUTBOUNDDOORBELL_0) {
+ /*
+ * Clear: the doorbell.
+ */
+ if (dev->msi_enabled)
+ aac_src_access_devreg(dev, AAC_CLEAR_SYNC_BIT);
+ else
+ src_writel(dev, MUnit.ODR_C,
+ OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
+ rc = 0;
+
+ break;
+ }
+
+ /*
+ * Yield the processor in case we are slow
+ */
+ usecs = 1 * USEC_PER_MSEC;
+ usleep_range(usecs, usecs + 50);
+ }
+ /*
+ * Pull the synch status from Mailbox 0.
+ */
+ if (status && !rc) {
+ status[0] = readl(&dev->IndexRegs->Mailbox[0]);
+ status[1] = readl(&dev->IndexRegs->Mailbox[1]);
+ status[2] = readl(&dev->IndexRegs->Mailbox[2]);
+ status[3] = readl(&dev->IndexRegs->Mailbox[3]);
+ status[4] = readl(&dev->IndexRegs->Mailbox[4]);
+ }
+
+ return rc;
+}
+
+/**
+ * aac_src_soft_reset - perform soft reset to speed up
+ * access
+ *
+ * Assumptions: That the controller is in a state where we can
+ * bring it back to life with an init struct. We can only use
+ * fast sync commands, as the timeout is 5 seconds.
+ *
+ * @dev: device to configure
+ *
+ */
+
+static int aac_src_soft_reset(struct aac_dev *dev)
+{
+ u32 status_omr = src_readl(dev, MUnit.OMR);
+ u32 status[5];
+ int rc = 1;
+ int state = 0;
+ char *state_str[7] = {
+ "GET_ADAPTER_PROPERTIES Failed",
+ "GET_ADAPTER_PROPERTIES timeout",
+ "SOFT_RESET not supported",
+ "DROP_IO Failed",
+ "DROP_IO timeout",
+ "Check Health failed"
+ };
+
+ if (status_omr == INVALID_OMR)
+ return 1; // pcie hosed
+
+ if (!(status_omr & KERNEL_UP_AND_RUNNING))
+ return 1; // not up and running
+
+ /*
+ * We go into soft reset mode to allow us to handle response
+ */
+ dev->in_soft_reset = 1;
+ dev->msi_enabled = status_omr & AAC_INT_MODE_MSIX;
+
+ /* Get adapter properties */
+ rc = aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES, 0, 0, 0,
+ 0, 0, 0, status+0, status+1, status+2, status+3, status+4);
+ if (rc)
+ goto out;
+
+ state++;
+ if (aac_src_wait_sync(dev, status)) {
+ rc = 1;
+ goto out;
+ }
+
+ state++;
+ if (!(status[1] & le32_to_cpu(AAC_OPT_EXTENDED) &&
+ (status[4] & le32_to_cpu(AAC_EXTOPT_SOFT_RESET)))) {
+ rc = 2;
+ goto out;
+ }
+
+ if ((status[1] & le32_to_cpu(AAC_OPT_EXTENDED)) &&
+ (status[4] & le32_to_cpu(AAC_EXTOPT_SA_FIRMWARE)))
+ dev->sa_firmware = 1;
+
+ state++;
+ rc = aac_adapter_sync_cmd(dev, DROP_IO, 0, 0, 0, 0, 0, 0,
+ status+0, status+1, status+2, status+3, status+4);
+
+ if (rc)
+ goto out;
+
+ state++;
+ if (aac_src_wait_sync(dev, status)) {
+ rc = 3;
+ goto out;
+ }
+
+ if (status[1])
+ dev_err(&dev->pdev->dev, "%s: %d outstanding I/O pending\n",
+ __func__, status[1]);
+
+ state++;
+ rc = aac_src_check_health(dev);
+
+out:
+ dev->in_soft_reset = 0;
+ dev->msi_enabled = 0;
+ if (rc)
+ dev_err(&dev->pdev->dev, "%s: %s status = %d", __func__,
+ state_str[state], rc);
+
+return rc;
+}
/**
* aac_srcv_init - initialize an SRCv card
* @dev: device to configure
@@ -1021,8 +1186,10 @@ int aac_srcv_init(struct aac_dev *dev)
if (dev->init_reset) {
dev->init_reset = false;
- if (!aac_src_restart_adapter(dev, 0, IOP_HWSOFT_RESET))
+ if (aac_src_soft_reset(dev)) {
+ aac_src_restart_adapter(dev, 0, IOP_HWSOFT_RESET);
++restart;
+ }
}
/*
@@ -1072,13 +1239,16 @@ int aac_srcv_init(struct aac_dev *dev)
printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
goto error_iounmap;
}
+
start = jiffies;
/*
* Wait for the adapter to be up and running. Wait up to 3 minutes
*/
- while (!((status = src_readl(dev, MUnit.OMR)) &
- KERNEL_UP_AND_RUNNING) ||
- status == 0xffffffff) {
+ do {
+ status = src_readl(dev, MUnit.OMR);
+ if (status == INVALID_OMR)
+ status = 0;
+
if ((restart &&
(status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
time_after(jiffies, start+HZ*startup_timeout)) {
@@ -1098,7 +1268,8 @@ int aac_srcv_init(struct aac_dev *dev)
++restart;
}
msleep(1);
- }
+ } while (!(status & KERNEL_UP_AND_RUNNING));
+
if (restart && aac_commit)
aac_commit = 1;
/*
@@ -1234,13 +1405,23 @@ void aac_src_access_devreg(struct aac_dev *dev, int mode)
static int aac_src_get_sync_status(struct aac_dev *dev)
{
+ int msix_val = 0;
+ int legacy_val = 0;
- int val;
+ msix_val = src_readl(dev, MUnit.ODR_MSI) & SRC_MSI_READ_MASK ? 1 : 0;
- if (dev->msi_enabled)
- val = src_readl(dev, MUnit.ODR_MSI) & 0x1000 ? 1 : 0;
- else
- val = src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT;
+ if (!dev->msi_enabled) {
+ /*
+ * if Legacy int status indicates cmd is not complete
+ * sample MSIx register to see if it indiactes cmd complete,
+ * if yes set the controller in MSIx mode and consider cmd
+ * completed
+ */
+ legacy_val = src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT;
+ if (!(legacy_val & 1) && msix_val)
+ dev->msi_enabled = 1;
+ return legacy_val;
+ }
- return val;
+ return msix_val;
}
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index bad35ffc015d..b48d5436f094 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -592,7 +592,7 @@ static int aha1740_probe (struct device *dev)
DMA_BIDIRECTIONAL);
if (!host->ecb_dma_addr) {
printk (KERN_ERR "aha1740_probe: Couldn't map ECB, giving up\n");
- scsi_unregister (shpnt);
+ scsi_host_put (shpnt);
goto err_host_put;
}
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index b560f396ee99..034f4eebb160 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -9338,9 +9338,9 @@ ahd_dumpseq(struct ahd_softc* ahd)
static void
ahd_loadseq(struct ahd_softc *ahd)
{
- struct cs cs_table[num_critical_sections];
- u_int begin_set[num_critical_sections];
- u_int end_set[num_critical_sections];
+ struct cs cs_table[NUM_CRITICAL_SECTIONS];
+ u_int begin_set[NUM_CRITICAL_SECTIONS];
+ u_int end_set[NUM_CRITICAL_SECTIONS];
const struct patch *cur_patch;
u_int cs_count;
u_int cur_cs;
@@ -9456,7 +9456,7 @@ ahd_loadseq(struct ahd_softc *ahd)
* Move through the CS table until we find a CS
* that might apply to this instruction.
*/
- for (; cur_cs < num_critical_sections; cur_cs++) {
+ for (; cur_cs < NUM_CRITICAL_SECTIONS; cur_cs++) {
if (critical_sections[cur_cs].end <= i) {
if (begin_set[cs_count] == TRUE
&& end_set[cs_count] == FALSE) {
diff --git a/drivers/scsi/aic7xxx/aic79xx_seq.h_shipped b/drivers/scsi/aic7xxx/aic79xx_seq.h_shipped
index 4b51e232392f..fd64a950ee44 100644
--- a/drivers/scsi/aic7xxx/aic79xx_seq.h_shipped
+++ b/drivers/scsi/aic7xxx/aic79xx_seq.h_shipped
@@ -1186,5 +1186,4 @@ static const struct cs {
{ 759, 763 }
};
-static const int num_critical_sections = sizeof(critical_sections)
- / sizeof(*critical_sections);
+#define NUM_CRITICAL_SECTIONS ARRAY_SIZE(critical_sections)
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 6612ff3b2e83..e97eceacf522 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -6848,9 +6848,9 @@ ahc_dumpseq(struct ahc_softc* ahc)
static int
ahc_loadseq(struct ahc_softc *ahc)
{
- struct cs cs_table[num_critical_sections];
- u_int begin_set[num_critical_sections];
- u_int end_set[num_critical_sections];
+ struct cs cs_table[NUM_CRITICAL_SECTIONS];
+ u_int begin_set[NUM_CRITICAL_SECTIONS];
+ u_int end_set[NUM_CRITICAL_SECTIONS];
const struct patch *cur_patch;
u_int cs_count;
u_int cur_cs;
@@ -6915,7 +6915,7 @@ ahc_loadseq(struct ahc_softc *ahc)
* Move through the CS table until we find a CS
* that might apply to this instruction.
*/
- for (; cur_cs < num_critical_sections; cur_cs++) {
+ for (; cur_cs < NUM_CRITICAL_SECTIONS; cur_cs++) {
if (critical_sections[cur_cs].end <= i) {
if (begin_set[cs_count] == TRUE
&& end_set[cs_count] == FALSE) {
diff --git a/drivers/scsi/aic7xxx/aic7xxx_seq.h_shipped b/drivers/scsi/aic7xxx/aic7xxx_seq.h_shipped
index 07e93fbae706..f37362bc8ece 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_seq.h_shipped
+++ b/drivers/scsi/aic7xxx/aic7xxx_seq.h_shipped
@@ -1304,5 +1304,4 @@ static const struct cs {
{ 875, 877 }
};
-static const int num_critical_sections = sizeof(critical_sections)
- / sizeof(*critical_sections);
+#define NUM_CRITICAL_SECTIONS ARRAY_SIZE(critical_sections)
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm.c b/drivers/scsi/aic7xxx/aicasm/aicasm.c
index 21ac265280bf..5f474e490f3e 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm.c
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm.c
@@ -451,8 +451,7 @@ output_code()
fprintf(ofile, "\n};\n\n");
fprintf(ofile,
-"static const int num_critical_sections = sizeof(critical_sections)\n"
-" / sizeof(*critical_sections);\n");
+ "#define NUM_CRITICAL_SECTIONS ARRAY_SIZE(critical_sections)\n");
fprintf(stderr, "%s: %d instructions used\n", appname, instrcount);
}
diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
index f375f3557c18..2e51ccc510e8 100644
--- a/drivers/scsi/arcmsr/arcmsr.h
+++ b/drivers/scsi/arcmsr/arcmsr.h
@@ -49,7 +49,7 @@ struct device_attribute;
#define ARCMSR_MAX_OUTSTANDING_CMD 1024
#define ARCMSR_DEFAULT_OUTSTANDING_CMD 128
#define ARCMSR_MIN_OUTSTANDING_CMD 32
-#define ARCMSR_DRIVER_VERSION "v1.40.00.04-20171130"
+#define ARCMSR_DRIVER_VERSION "v1.40.00.05-20180309"
#define ARCMSR_SCSI_INITIATOR_ID 255
#define ARCMSR_MAX_XFER_SECTORS 512
#define ARCMSR_MAX_XFER_SECTORS_B 4096
@@ -779,12 +779,12 @@ struct AdapterControlBlock
/* message clear rqbuffer */
#define ACB_F_MESSAGE_WQBUFFER_READED 0x0040
#define ACB_F_BUS_RESET 0x0080
-#define ACB_F_BUS_HANG_ON 0x0800/* need hardware reset bus */
#define ACB_F_IOP_INITED 0x0100
/* iop init */
#define ACB_F_ABORT 0x0200
#define ACB_F_FIRMWARE_TRAP 0x0400
+#define ACB_F_ADAPTER_REMOVED 0x0800
#define ACB_F_MSG_GET_CONFIG 0x1000
struct CommandControlBlock * pccb_pool[ARCMSR_MAX_FREECCB_NUM];
/* used for memory free */
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 75e828bd30e3..732b5d9242f1 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -1446,12 +1446,80 @@ static void arcmsr_done4abort_postqueue(struct AdapterControlBlock *acb)
}
}
+static void arcmsr_remove_scsi_devices(struct AdapterControlBlock *acb)
+{
+ char *acb_dev_map = (char *)acb->device_map;
+ int target, lun, i;
+ struct scsi_device *psdev;
+ struct CommandControlBlock *ccb;
+ char temp;
+
+ for (i = 0; i < acb->maxFreeCCB; i++) {
+ ccb = acb->pccb_pool[i];
+ if (ccb->startdone == ARCMSR_CCB_START) {
+ ccb->pcmd->result = DID_NO_CONNECT << 16;
+ arcmsr_pci_unmap_dma(ccb);
+ ccb->pcmd->scsi_done(ccb->pcmd);
+ }
+ }
+ for (target = 0; target < ARCMSR_MAX_TARGETID; target++) {
+ temp = *acb_dev_map;
+ if (temp) {
+ for (lun = 0; lun < ARCMSR_MAX_TARGETLUN; lun++) {
+ if (temp & 1) {
+ psdev = scsi_device_lookup(acb->host,
+ 0, target, lun);
+ if (psdev != NULL) {
+ scsi_remove_device(psdev);
+ scsi_device_put(psdev);
+ }
+ }
+ temp >>= 1;
+ }
+ *acb_dev_map = 0;
+ }
+ acb_dev_map++;
+ }
+}
+
+static void arcmsr_free_pcidev(struct AdapterControlBlock *acb)
+{
+ struct pci_dev *pdev;
+ struct Scsi_Host *host;
+
+ host = acb->host;
+ arcmsr_free_sysfs_attr(acb);
+ scsi_remove_host(host);
+ flush_work(&acb->arcmsr_do_message_isr_bh);
+ del_timer_sync(&acb->eternal_timer);
+ if (set_date_time)
+ del_timer_sync(&acb->refresh_timer);
+ pdev = acb->pdev;
+ arcmsr_free_irq(pdev, acb);
+ arcmsr_free_ccb_pool(acb);
+ arcmsr_free_mu(acb);
+ arcmsr_unmap_pciregion(acb);
+ pci_release_regions(pdev);
+ scsi_host_put(host);
+ pci_disable_device(pdev);
+}
+
static void arcmsr_remove(struct pci_dev *pdev)
{
struct Scsi_Host *host = pci_get_drvdata(pdev);
struct AdapterControlBlock *acb =
(struct AdapterControlBlock *) host->hostdata;
int poll_count = 0;
+ uint16_t dev_id;
+
+ pci_read_config_word(pdev, PCI_DEVICE_ID, &dev_id);
+ if (dev_id == 0xffff) {
+ acb->acb_flags &= ~ACB_F_IOP_INITED;
+ acb->acb_flags |= ACB_F_ADAPTER_REMOVED;
+ arcmsr_remove_scsi_devices(acb);
+ arcmsr_free_pcidev(acb);
+ return;
+ }
arcmsr_free_sysfs_attr(acb);
scsi_remove_host(host);
flush_work(&acb->arcmsr_do_message_isr_bh);
@@ -1499,6 +1567,8 @@ static void arcmsr_shutdown(struct pci_dev *pdev)
struct Scsi_Host *host = pci_get_drvdata(pdev);
struct AdapterControlBlock *acb =
(struct AdapterControlBlock *)host->hostdata;
+ if (acb->acb_flags & ACB_F_ADAPTER_REMOVED)
+ return;
del_timer_sync(&acb->eternal_timer);
if (set_date_time)
del_timer_sync(&acb->refresh_timer);
@@ -2931,6 +3001,12 @@ static int arcmsr_queue_command_lck(struct scsi_cmnd *cmd,
struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
struct CommandControlBlock *ccb;
int target = cmd->device->id;
+
+ if (acb->acb_flags & ACB_F_ADAPTER_REMOVED) {
+ cmd->result = (DID_NO_CONNECT << 16);
+ cmd->scsi_done(cmd);
+ return 0;
+ }
cmd->scsi_done = done;
cmd->host_scribble = NULL;
cmd->result = 0;
@@ -3731,6 +3807,8 @@ static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb)
case ACB_ADAPTER_TYPE_A: {
struct MessageUnit_A __iomem *reg = acb->pmuA;
do {
+ if (!(acb->acb_flags & ACB_F_IOP_INITED))
+ msleep(20);
firmware_state = readl(&reg->outbound_msgaddr1);
} while ((firmware_state & ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK) == 0);
}
@@ -3739,6 +3817,8 @@ static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb)
case ACB_ADAPTER_TYPE_B: {
struct MessageUnit_B *reg = acb->pmuB;
do {
+ if (!(acb->acb_flags & ACB_F_IOP_INITED))
+ msleep(20);
firmware_state = readl(reg->iop2drv_doorbell);
} while ((firmware_state & ARCMSR_MESSAGE_FIRMWARE_OK) == 0);
writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT, reg->drv2iop_doorbell);
@@ -3747,6 +3827,8 @@ static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb)
case ACB_ADAPTER_TYPE_C: {
struct MessageUnit_C __iomem *reg = acb->pmuC;
do {
+ if (!(acb->acb_flags & ACB_F_IOP_INITED))
+ msleep(20);
firmware_state = readl(&reg->outbound_msgaddr1);
} while ((firmware_state & ARCMSR_HBCMU_MESSAGE_FIRMWARE_OK) == 0);
}
@@ -3754,6 +3836,8 @@ static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb)
case ACB_ADAPTER_TYPE_D: {
struct MessageUnit_D *reg = acb->pmuD;
do {
+ if (!(acb->acb_flags & ACB_F_IOP_INITED))
+ msleep(20);
firmware_state = readl(reg->outbound_msgaddr1);
} while ((firmware_state &
ARCMSR_ARC1214_MESSAGE_FIRMWARE_OK) == 0);
@@ -3762,6 +3846,8 @@ static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb)
case ACB_ADAPTER_TYPE_E: {
struct MessageUnit_E __iomem *reg = acb->pmuE;
do {
+ if (!(acb->acb_flags & ACB_F_IOP_INITED))
+ msleep(20);
firmware_state = readl(&reg->outbound_msgaddr1);
} while ((firmware_state & ARCMSR_HBEMU_MESSAGE_FIRMWARE_OK) == 0);
}
@@ -4177,6 +4263,8 @@ static int arcmsr_bus_reset(struct scsi_cmnd *cmd)
int retry_count = 0;
int rtn = FAILED;
acb = (struct AdapterControlBlock *) cmd->device->host->hostdata;
+ if (acb->acb_flags & ACB_F_ADAPTER_REMOVED)
+ return SUCCESS;
pr_notice("arcmsr: executing bus reset eh.....num_resets = %d,"
" num_aborts = %d \n", acb->num_resets, acb->num_aborts);
acb->num_resets++;
@@ -4243,6 +4331,8 @@ static int arcmsr_abort(struct scsi_cmnd *cmd)
int rtn = FAILED;
uint32_t intmask_org;
+ if (acb->acb_flags & ACB_F_ADAPTER_REMOVED)
+ return SUCCESS;
printk(KERN_NOTICE
"arcmsr%d: abort device command of scsi id = %d lun = %d\n",
acb->host->host_no, cmd->device->id, (u32)cmd->device->lun);
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 8b52a9dbb9cf..b46997cf77e2 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -1413,11 +1413,11 @@ static void atp885_init(struct Scsi_Host *shpnt)
atpdev->global_map[m] = 0;
for (k = 0; k < 4; k++) {
atp_writew_base(atpdev, 0x3c, n++);
- ((unsigned long *)&setupdata[m][0])[k] = atp_readl_base(atpdev, 0x38);
+ ((u32 *)&setupdata[m][0])[k] = atp_readl_base(atpdev, 0x38);
}
for (k = 0; k < 4; k++) {
atp_writew_base(atpdev, 0x3c, n++);
- ((unsigned long *)&atpdev->sp[m][0])[k] = atp_readl_base(atpdev, 0x38);
+ ((u32 *)&atpdev->sp[m][0])[k] = atp_readl_base(atpdev, 0x38);
}
n += 8;
}
diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c
index 3976e787ba64..7c884f881180 100644
--- a/drivers/scsi/bfa/bfad_bsg.c
+++ b/drivers/scsi/bfa/bfad_bsg.c
@@ -891,7 +891,7 @@ bfad_iocmd_fabric_get_lports(struct bfad_s *bfad, void *cmd,
if (bfad_chk_iocmd_sz(payload_len,
sizeof(struct bfa_bsg_fabric_get_lports_s),
- sizeof(wwn_t[iocmd->nports])) != BFA_STATUS_OK) {
+ sizeof(wwn_t) * iocmd->nports) != BFA_STATUS_OK) {
iocmd->status = BFA_STATUS_VERSION_FAIL;
goto out;
}
diff --git a/drivers/scsi/csiostor/csio_attr.c b/drivers/scsi/csiostor/csio_attr.c
index 2d1c4ebd40f9..8a004036e3d7 100644
--- a/drivers/scsi/csiostor/csio_attr.c
+++ b/drivers/scsi/csiostor/csio_attr.c
@@ -274,12 +274,24 @@ csio_get_host_speed(struct Scsi_Host *shost)
spin_lock_irq(&hw->lock);
switch (hw->pport[ln->portid].link_speed) {
- case FW_PORT_CAP_SPEED_1G:
+ case FW_PORT_CAP32_SPEED_1G:
fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
break;
- case FW_PORT_CAP_SPEED_10G:
+ case FW_PORT_CAP32_SPEED_10G:
fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
break;
+ case FW_PORT_CAP32_SPEED_25G:
+ fc_host_speed(shost) = FC_PORTSPEED_25GBIT;
+ break;
+ case FW_PORT_CAP32_SPEED_40G:
+ fc_host_speed(shost) = FC_PORTSPEED_40GBIT;
+ break;
+ case FW_PORT_CAP32_SPEED_50G:
+ fc_host_speed(shost) = FC_PORTSPEED_50GBIT;
+ break;
+ case FW_PORT_CAP32_SPEED_100G:
+ fc_host_speed(shost) = FC_PORTSPEED_100GBIT;
+ break;
default:
fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
break;
diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c
index 0bd1131b6cc9..96bbb82c826d 100644
--- a/drivers/scsi/csiostor/csio_hw.c
+++ b/drivers/scsi/csiostor/csio_hw.c
@@ -1409,6 +1409,235 @@ out:
return rv;
}
+static inline enum cc_fec fwcap_to_cc_fec(fw_port_cap32_t fw_fec)
+{
+ enum cc_fec cc_fec = 0;
+
+ if (fw_fec & FW_PORT_CAP32_FEC_RS)
+ cc_fec |= FEC_RS;
+ if (fw_fec & FW_PORT_CAP32_FEC_BASER_RS)
+ cc_fec |= FEC_BASER_RS;
+
+ return cc_fec;
+}
+
+static inline fw_port_cap32_t cc_to_fwcap_pause(enum cc_pause cc_pause)
+{
+ fw_port_cap32_t fw_pause = 0;
+
+ if (cc_pause & PAUSE_RX)
+ fw_pause |= FW_PORT_CAP32_FC_RX;
+ if (cc_pause & PAUSE_TX)
+ fw_pause |= FW_PORT_CAP32_FC_TX;
+
+ return fw_pause;
+}
+
+static inline fw_port_cap32_t cc_to_fwcap_fec(enum cc_fec cc_fec)
+{
+ fw_port_cap32_t fw_fec = 0;
+
+ if (cc_fec & FEC_RS)
+ fw_fec |= FW_PORT_CAP32_FEC_RS;
+ if (cc_fec & FEC_BASER_RS)
+ fw_fec |= FW_PORT_CAP32_FEC_BASER_RS;
+
+ return fw_fec;
+}
+
+/**
+ * fwcap_to_fwspeed - return highest speed in Port Capabilities
+ * @acaps: advertised Port Capabilities
+ *
+ * Get the highest speed for the port from the advertised Port
+ * Capabilities.
+ */
+fw_port_cap32_t fwcap_to_fwspeed(fw_port_cap32_t acaps)
+{
+ #define TEST_SPEED_RETURN(__caps_speed) \
+ do { \
+ if (acaps & FW_PORT_CAP32_SPEED_##__caps_speed) \
+ return FW_PORT_CAP32_SPEED_##__caps_speed; \
+ } while (0)
+
+ TEST_SPEED_RETURN(400G);
+ TEST_SPEED_RETURN(200G);
+ TEST_SPEED_RETURN(100G);
+ TEST_SPEED_RETURN(50G);
+ TEST_SPEED_RETURN(40G);
+ TEST_SPEED_RETURN(25G);
+ TEST_SPEED_RETURN(10G);
+ TEST_SPEED_RETURN(1G);
+ TEST_SPEED_RETURN(100M);
+
+ #undef TEST_SPEED_RETURN
+
+ return 0;
+}
+
+/**
+ * fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits
+ * @caps16: a 16-bit Port Capabilities value
+ *
+ * Returns the equivalent 32-bit Port Capabilities value.
+ */
+fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16)
+{
+ fw_port_cap32_t caps32 = 0;
+
+ #define CAP16_TO_CAP32(__cap) \
+ do { \
+ if (caps16 & FW_PORT_CAP_##__cap) \
+ caps32 |= FW_PORT_CAP32_##__cap; \
+ } while (0)
+
+ CAP16_TO_CAP32(SPEED_100M);
+ CAP16_TO_CAP32(SPEED_1G);
+ CAP16_TO_CAP32(SPEED_25G);
+ CAP16_TO_CAP32(SPEED_10G);
+ CAP16_TO_CAP32(SPEED_40G);
+ CAP16_TO_CAP32(SPEED_100G);
+ CAP16_TO_CAP32(FC_RX);
+ CAP16_TO_CAP32(FC_TX);
+ CAP16_TO_CAP32(ANEG);
+ CAP16_TO_CAP32(MDIX);
+ CAP16_TO_CAP32(MDIAUTO);
+ CAP16_TO_CAP32(FEC_RS);
+ CAP16_TO_CAP32(FEC_BASER_RS);
+ CAP16_TO_CAP32(802_3_PAUSE);
+ CAP16_TO_CAP32(802_3_ASM_DIR);
+
+ #undef CAP16_TO_CAP32
+
+ return caps32;
+}
+
+/**
+ * lstatus_to_fwcap - translate old lstatus to 32-bit Port Capabilities
+ * @lstatus: old FW_PORT_ACTION_GET_PORT_INFO lstatus value
+ *
+ * Translates old FW_PORT_ACTION_GET_PORT_INFO lstatus field into new
+ * 32-bit Port Capabilities value.
+ */
+fw_port_cap32_t lstatus_to_fwcap(u32 lstatus)
+{
+ fw_port_cap32_t linkattr = 0;
+
+ /* The format of the Link Status in the old
+ * 16-bit Port Information message isn't the same as the
+ * 16-bit Port Capabilities bitfield used everywhere else.
+ */
+ if (lstatus & FW_PORT_CMD_RXPAUSE_F)
+ linkattr |= FW_PORT_CAP32_FC_RX;
+ if (lstatus & FW_PORT_CMD_TXPAUSE_F)
+ linkattr |= FW_PORT_CAP32_FC_TX;
+ if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M))
+ linkattr |= FW_PORT_CAP32_SPEED_100M;
+ if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G))
+ linkattr |= FW_PORT_CAP32_SPEED_1G;
+ if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G))
+ linkattr |= FW_PORT_CAP32_SPEED_10G;
+ if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G))
+ linkattr |= FW_PORT_CAP32_SPEED_25G;
+ if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G))
+ linkattr |= FW_PORT_CAP32_SPEED_40G;
+ if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G))
+ linkattr |= FW_PORT_CAP32_SPEED_100G;
+
+ return linkattr;
+}
+
+/**
+ * csio_init_link_config - initialize a link's SW state
+ * @lc: pointer to structure holding the link state
+ * @pcaps: link Port Capabilities
+ * @acaps: link current Advertised Port Capabilities
+ *
+ * Initializes the SW state maintained for each link, including the link's
+ * capabilities and default speed/flow-control/autonegotiation settings.
+ */
+static void csio_init_link_config(struct link_config *lc, fw_port_cap32_t pcaps,
+ fw_port_cap32_t acaps)
+{
+ lc->pcaps = pcaps;
+ lc->def_acaps = acaps;
+ lc->lpacaps = 0;
+ lc->speed_caps = 0;
+ lc->speed = 0;
+ lc->requested_fc = PAUSE_RX | PAUSE_TX;
+ lc->fc = lc->requested_fc;
+
+ /*
+ * For Forward Error Control, we default to whatever the Firmware
+ * tells us the Link is currently advertising.
+ */
+ lc->requested_fec = FEC_AUTO;
+ lc->fec = fwcap_to_cc_fec(lc->def_acaps);
+
+ /* If the Port is capable of Auto-Negtotiation, initialize it as
+ * "enabled" and copy over all of the Physical Port Capabilities
+ * to the Advertised Port Capabilities. Otherwise mark it as
+ * Auto-Negotiate disabled and select the highest supported speed
+ * for the link. Note parallel structure in t4_link_l1cfg_core()
+ * and t4_handle_get_port_info().
+ */
+ if (lc->pcaps & FW_PORT_CAP32_ANEG) {
+ lc->acaps = lc->pcaps & ADVERT_MASK;
+ lc->autoneg = AUTONEG_ENABLE;
+ lc->requested_fc |= PAUSE_AUTONEG;
+ } else {
+ lc->acaps = 0;
+ lc->autoneg = AUTONEG_DISABLE;
+ }
+}
+
+static void csio_link_l1cfg(struct link_config *lc, uint16_t fw_caps,
+ uint32_t *rcaps)
+{
+ unsigned int fw_mdi = FW_PORT_CAP32_MDI_V(FW_PORT_CAP32_MDI_AUTO);
+ fw_port_cap32_t fw_fc, cc_fec, fw_fec, lrcap;
+
+ lc->link_ok = 0;
+
+ /*
+ * Convert driver coding of Pause Frame Flow Control settings into the
+ * Firmware's API.
+ */
+ fw_fc = cc_to_fwcap_pause(lc->requested_fc);
+
+ /*
+ * Convert Common Code Forward Error Control settings into the
+ * Firmware's API. If the current Requested FEC has "Automatic"
+ * (IEEE 802.3) specified, then we use whatever the Firmware
+ * sent us as part of it's IEEE 802.3-based interpratation of
+ * the Transceiver Module EPROM FEC parameters. Otherwise we
+ * use whatever is in the current Requested FEC settings.
+ */
+ if (lc->requested_fec & FEC_AUTO)
+ cc_fec = fwcap_to_cc_fec(lc->def_acaps);
+ else
+ cc_fec = lc->requested_fec;
+ fw_fec = cc_to_fwcap_fec(cc_fec);
+
+ /* Figure out what our Requested Port Capabilities are going to be.
+ * Note parallel structure in t4_handle_get_port_info() and
+ * init_link_config().
+ */
+ if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) {
+ lrcap = (lc->pcaps & ADVERT_MASK) | fw_fc | fw_fec;
+ lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
+ lc->fec = cc_fec;
+ } else if (lc->autoneg == AUTONEG_DISABLE) {
+ lrcap = lc->speed_caps | fw_fc | fw_fec | fw_mdi;
+ lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
+ lc->fec = cc_fec;
+ } else {
+ lrcap = lc->acaps | fw_fc | fw_fec | fw_mdi;
+ }
+
+ *rcaps = lrcap;
+}
+
/*
* csio_enable_ports - Bring up all available ports.
* @hw: HW module.
@@ -1418,8 +1647,10 @@ static int
csio_enable_ports(struct csio_hw *hw)
{
struct csio_mb *mbp;
+ u16 fw_caps = FW_CAPS_UNKNOWN;
enum fw_retval retval;
uint8_t portid;
+ fw_port_cap32_t pcaps, acaps, rcaps;
int i;
mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
@@ -1431,9 +1662,39 @@ csio_enable_ports(struct csio_hw *hw)
for (i = 0; i < hw->num_pports; i++) {
portid = hw->pport[i].portid;
+ if (fw_caps == FW_CAPS_UNKNOWN) {
+ u32 param, val;
+
+ param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) |
+ FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_PORT_CAPS32));
+ val = 1;
+
+ csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO,
+ hw->pfn, 0, 1, &param, &val, false,
+ NULL);
+
+ if (csio_mb_issue(hw, mbp)) {
+ csio_err(hw, "failed to issue FW_PARAMS_CMD(r) port:%d\n",
+ portid);
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ csio_mb_process_read_params_rsp(hw, mbp, &retval, 1,
+ &val);
+ if (retval != FW_SUCCESS) {
+ csio_err(hw, "FW_PARAMS_CMD(r) port:%d failed: 0x%x\n",
+ portid, retval);
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ fw_caps = val;
+ }
+
/* Read PORT information */
csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid,
- false, 0, 0, NULL);
+ false, 0, fw_caps, NULL);
if (csio_mb_issue(hw, mbp)) {
csio_err(hw, "failed to issue FW_PORT_CMD(r) port:%d\n",
@@ -1442,8 +1703,8 @@ csio_enable_ports(struct csio_hw *hw)
return -EINVAL;
}
- csio_mb_process_read_port_rsp(hw, mbp, &retval,
- &hw->pport[i].pcap);
+ csio_mb_process_read_port_rsp(hw, mbp, &retval, fw_caps,
+ &pcaps, &acaps);
if (retval != FW_SUCCESS) {
csio_err(hw, "FW_PORT_CMD(r) port:%d failed: 0x%x\n",
portid, retval);
@@ -1451,9 +1712,13 @@ csio_enable_ports(struct csio_hw *hw)
return -EINVAL;
}
+ csio_init_link_config(&hw->pport[i].link_cfg, pcaps, acaps);
+
+ csio_link_l1cfg(&hw->pport[i].link_cfg, fw_caps, &rcaps);
+
/* Write back PORT information */
- csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid, true,
- (PAUSE_RX | PAUSE_TX), hw->pport[i].pcap, NULL);
+ csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid,
+ true, rcaps, fw_caps, NULL);
if (csio_mb_issue(hw, mbp)) {
csio_err(hw, "failed to issue FW_PORT_CMD(w) port:%d\n",
diff --git a/drivers/scsi/csiostor/csio_hw.h b/drivers/scsi/csiostor/csio_hw.h
index 30f5f523c8cc..9e73ef771eb7 100644
--- a/drivers/scsi/csiostor/csio_hw.h
+++ b/drivers/scsi/csiostor/csio_hw.h
@@ -268,8 +268,62 @@ struct csio_vpd {
uint8_t id[ID_LEN + 1];
};
+/* Firmware Port Capabilities types. */
+
+typedef u16 fw_port_cap16_t; /* 16-bit Port Capabilities integral value */
+typedef u32 fw_port_cap32_t; /* 32-bit Port Capabilities integral value */
+
+enum fw_caps {
+ FW_CAPS_UNKNOWN = 0, /* 0'ed out initial state */
+ FW_CAPS16 = 1, /* old Firmware: 16-bit Port Capabilities */
+ FW_CAPS32 = 2, /* new Firmware: 32-bit Port Capabilities */
+};
+
+enum cc_pause {
+ PAUSE_RX = 1 << 0,
+ PAUSE_TX = 1 << 1,
+ PAUSE_AUTONEG = 1 << 2
+};
+
+enum cc_fec {
+ FEC_AUTO = 1 << 0, /* IEEE 802.3 "automatic" */
+ FEC_RS = 1 << 1, /* Reed-Solomon */
+ FEC_BASER_RS = 1 << 2 /* BaseR/Reed-Solomon */
+};
+
+struct link_config {
+ fw_port_cap32_t pcaps; /* link capabilities */
+ fw_port_cap32_t def_acaps; /* default advertised capabilities */
+ fw_port_cap32_t acaps; /* advertised capabilities */
+ fw_port_cap32_t lpacaps; /* peer advertised capabilities */
+
+ fw_port_cap32_t speed_caps; /* speed(s) user has requested */
+ unsigned int speed; /* actual link speed (Mb/s) */
+
+ enum cc_pause requested_fc; /* flow control user has requested */
+ enum cc_pause fc; /* actual link flow control */
+
+ enum cc_fec requested_fec; /* Forward Error Correction: */
+ enum cc_fec fec; /* requested and actual in use */
+
+ unsigned char autoneg; /* autonegotiating? */
+
+ unsigned char link_ok; /* link up? */
+ unsigned char link_down_rc; /* link down reason */
+};
+
+#define FW_LEN16(fw_struct) FW_CMD_LEN16_V(sizeof(fw_struct) / 16)
+
+#define ADVERT_MASK (FW_PORT_CAP32_SPEED_V(FW_PORT_CAP32_SPEED_M) | \
+ FW_PORT_CAP32_ANEG)
+
+/* Enable or disable autonegotiation. */
+#define AUTONEG_DISABLE 0x00
+#define AUTONEG_ENABLE 0x01
+
struct csio_pport {
uint16_t pcap;
+ uint16_t acap;
uint8_t portid;
uint8_t link_status;
uint16_t link_speed;
@@ -278,6 +332,7 @@ struct csio_pport {
uint8_t rsvd1;
uint8_t rsvd2;
uint8_t rsvd3;
+ struct link_config link_cfg;
};
/* fcoe resource information */
@@ -582,6 +637,10 @@ int csio_hw_slow_intr_handler(struct csio_hw *);
int csio_handle_intr_status(struct csio_hw *, unsigned int,
const struct intr_info *);
+fw_port_cap32_t fwcap_to_fwspeed(fw_port_cap32_t acaps);
+fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16);
+fw_port_cap32_t lstatus_to_fwcap(u32 lstatus);
+
int csio_hw_start(struct csio_hw *);
int csio_hw_stop(struct csio_hw *);
int csio_hw_reset(struct csio_hw *);
diff --git a/drivers/scsi/csiostor/csio_lnode.c b/drivers/scsi/csiostor/csio_lnode.c
index 7dbbbb81a1e7..cc5611efc7a9 100644
--- a/drivers/scsi/csiostor/csio_lnode.c
+++ b/drivers/scsi/csiostor/csio_lnode.c
@@ -352,6 +352,14 @@ csio_ln_fdmi_rhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
val = htonl(FC_PORTSPEED_1GBIT);
else if (hw->pport[ln->portid].link_speed == FW_PORT_CAP_SPEED_10G)
val = htonl(FC_PORTSPEED_10GBIT);
+ else if (hw->pport[ln->portid].link_speed == FW_PORT_CAP32_SPEED_25G)
+ val = htonl(FC_PORTSPEED_25GBIT);
+ else if (hw->pport[ln->portid].link_speed == FW_PORT_CAP32_SPEED_40G)
+ val = htonl(FC_PORTSPEED_40GBIT);
+ else if (hw->pport[ln->portid].link_speed == FW_PORT_CAP32_SPEED_50G)
+ val = htonl(FC_PORTSPEED_50GBIT);
+ else if (hw->pport[ln->portid].link_speed == FW_PORT_CAP32_SPEED_100G)
+ val = htonl(FC_PORTSPEED_100GBIT);
else
val = htonl(CSIO_HBA_PORTSPEED_UNKNOWN);
csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_CURRENTPORTSPEED,
diff --git a/drivers/scsi/csiostor/csio_mb.c b/drivers/scsi/csiostor/csio_mb.c
index 5f4e0a787bd1..c026417269c3 100644
--- a/drivers/scsi/csiostor/csio_mb.c
+++ b/drivers/scsi/csiostor/csio_mb.c
@@ -326,10 +326,6 @@ csio_mb_caps_config(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
cmdp->fcoecaps |= htons(FW_CAPS_CONFIG_FCOE_TARGET);
}
-#define CSIO_ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\
- FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G |\
- FW_PORT_CAP_ANEG)
-
/*
* csio_mb_port- FW PORT command helper
* @hw: The HW structure
@@ -344,11 +340,10 @@ csio_mb_caps_config(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
*/
void
csio_mb_port(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
- uint8_t portid, bool wr, uint32_t fc, uint16_t caps,
+ u8 portid, bool wr, uint32_t fc, uint16_t fw_caps,
void (*cbfn) (struct csio_hw *, struct csio_mb *))
{
struct fw_port_cmd *cmdp = (struct fw_port_cmd *)(mbp->mb);
- unsigned int lfc = 0, mdi = FW_PORT_CAP_MDI_V(FW_PORT_CAP_MDI_AUTO);
CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1);
@@ -358,26 +353,24 @@ csio_mb_port(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
FW_PORT_CMD_PORTID_V(portid));
if (!wr) {
cmdp->action_to_len16 = htonl(
- FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_GET_PORT_INFO) |
+ FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
+ ? FW_PORT_ACTION_GET_PORT_INFO
+ : FW_PORT_ACTION_GET_PORT_INFO32) |
FW_CMD_LEN16_V(sizeof(*cmdp) / 16));
return;
}
/* Set port */
cmdp->action_to_len16 = htonl(
- FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_L1_CFG) |
+ FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
+ ? FW_PORT_ACTION_L1_CFG
+ : FW_PORT_ACTION_L1_CFG32) |
FW_CMD_LEN16_V(sizeof(*cmdp) / 16));
- if (fc & PAUSE_RX)
- lfc |= FW_PORT_CAP_FC_RX;
- if (fc & PAUSE_TX)
- lfc |= FW_PORT_CAP_FC_TX;
-
- if (!(caps & FW_PORT_CAP_ANEG))
- cmdp->u.l1cfg.rcap = htonl((caps & CSIO_ADVERT_MASK) | lfc);
+ if (fw_caps == FW_CAPS16)
+ cmdp->u.l1cfg.rcap = cpu_to_be32(fc);
else
- cmdp->u.l1cfg.rcap = htonl((caps & CSIO_ADVERT_MASK) |
- lfc | mdi);
+ cmdp->u.l1cfg32.rcap32 = cpu_to_be32(fc);
}
/*
@@ -390,14 +383,22 @@ csio_mb_port(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
*/
void
csio_mb_process_read_port_rsp(struct csio_hw *hw, struct csio_mb *mbp,
- enum fw_retval *retval, uint16_t *caps)
+ enum fw_retval *retval, uint16_t fw_caps,
+ u32 *pcaps, u32 *acaps)
{
struct fw_port_cmd *rsp = (struct fw_port_cmd *)(mbp->mb);
*retval = FW_CMD_RETVAL_G(ntohl(rsp->action_to_len16));
- if (*retval == FW_SUCCESS)
- *caps = ntohs(rsp->u.info.pcap);
+ if (*retval == FW_SUCCESS) {
+ if (fw_caps == FW_CAPS16) {
+ *pcaps = fwcaps16_to_caps32(ntohs(rsp->u.info.pcap));
+ *acaps = fwcaps16_to_caps32(ntohs(rsp->u.info.acap));
+ } else {
+ *pcaps = ntohs(rsp->u.info32.pcaps32);
+ *acaps = ntohs(rsp->u.info32.acaps32);
+ }
+ }
}
/*
@@ -1409,6 +1410,7 @@ csio_mb_fwevt_handler(struct csio_hw *hw, __be64 *cmd)
uint32_t link_status;
uint16_t action;
uint8_t mod_type;
+ fw_port_cap32_t linkattr;
if (opcode == FW_PORT_CMD) {
pcmd = (struct fw_port_cmd *)cmd;
@@ -1416,22 +1418,34 @@ csio_mb_fwevt_handler(struct csio_hw *hw, __be64 *cmd)
ntohl(pcmd->op_to_portid));
action = FW_PORT_CMD_ACTION_G(
ntohl(pcmd->action_to_len16));
- if (action != FW_PORT_ACTION_GET_PORT_INFO) {
+ if (action != FW_PORT_ACTION_GET_PORT_INFO &&
+ action != FW_PORT_ACTION_GET_PORT_INFO32) {
csio_err(hw, "Unhandled FW_PORT_CMD action: %u\n",
action);
return -EINVAL;
}
- link_status = ntohl(pcmd->u.info.lstatus_to_modtype);
- mod_type = FW_PORT_CMD_MODTYPE_G(link_status);
+ if (action == FW_PORT_ACTION_GET_PORT_INFO) {
+ link_status = ntohl(pcmd->u.info.lstatus_to_modtype);
+ mod_type = FW_PORT_CMD_MODTYPE_G(link_status);
+ linkattr = lstatus_to_fwcap(link_status);
+
+ hw->pport[port_id].link_status =
+ FW_PORT_CMD_LSTATUS_G(link_status);
+ } else {
+ link_status =
+ ntohl(pcmd->u.info32.lstatus32_to_cbllen32);
+ mod_type = FW_PORT_CMD_MODTYPE32_G(link_status);
+ linkattr = ntohl(pcmd->u.info32.linkattr32);
+
+ hw->pport[port_id].link_status =
+ FW_PORT_CMD_LSTATUS32_G(link_status);
+ }
- hw->pport[port_id].link_status =
- FW_PORT_CMD_LSTATUS_G(link_status);
- hw->pport[port_id].link_speed =
- FW_PORT_CMD_LSPEED_G(link_status);
+ hw->pport[port_id].link_speed = fwcap_to_fwspeed(linkattr);
csio_info(hw, "Port:%x - LINK %s\n", port_id,
- FW_PORT_CMD_LSTATUS_G(link_status) ? "UP" : "DOWN");
+ hw->pport[port_id].link_status ? "UP" : "DOWN");
if (mod_type != hw->pport[port_id].mod_type) {
hw->pport[port_id].mod_type = mod_type;
diff --git a/drivers/scsi/csiostor/csio_mb.h b/drivers/scsi/csiostor/csio_mb.h
index a6823df73015..b07e891c5936 100644
--- a/drivers/scsi/csiostor/csio_mb.h
+++ b/drivers/scsi/csiostor/csio_mb.h
@@ -88,12 +88,6 @@ enum csio_dev_state {
FW_PARAMS_PARAM_Y_V(0) | \
FW_PARAMS_PARAM_Z_V(0))
-enum {
- PAUSE_RX = 1 << 0,
- PAUSE_TX = 1 << 1,
- PAUSE_AUTONEG = 1 << 2
-};
-
#define CSIO_INIT_MBP(__mbp, __cp, __tmo, __priv, __fn, __clear) \
do { \
if (__clear) \
@@ -189,7 +183,8 @@ void csio_mb_port(struct csio_hw *, struct csio_mb *, uint32_t,
void (*) (struct csio_hw *, struct csio_mb *));
void csio_mb_process_read_port_rsp(struct csio_hw *, struct csio_mb *,
- enum fw_retval *, uint16_t *);
+ enum fw_retval *, uint16_t,
+ uint32_t *, uint32_t *);
void csio_mb_initialize(struct csio_hw *, struct csio_mb *, uint32_t,
void (*)(struct csio_hw *, struct csio_mb *));
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 4b44325d1a82..12dc7100bb4c 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -138,12 +138,12 @@ static void release_port_group(struct kref *kref)
static int submit_rtpg(struct scsi_device *sdev, unsigned char *buff,
int bufflen, struct scsi_sense_hdr *sshdr, int flags)
{
- u8 cdb[COMMAND_SIZE(MAINTENANCE_IN)];
+ u8 cdb[MAX_COMMAND_SIZE];
int req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
REQ_FAILFAST_DRIVER;
/* Prepare the command. */
- memset(cdb, 0x0, COMMAND_SIZE(MAINTENANCE_IN));
+ memset(cdb, 0x0, MAX_COMMAND_SIZE);
cdb[0] = MAINTENANCE_IN;
if (!(flags & ALUA_RTPG_EXT_HDR_UNSUPP))
cdb[1] = MI_REPORT_TARGET_PGS | MI_EXT_HDR_PARAM_FMT;
@@ -166,7 +166,7 @@ static int submit_rtpg(struct scsi_device *sdev, unsigned char *buff,
static int submit_stpg(struct scsi_device *sdev, int group_id,
struct scsi_sense_hdr *sshdr)
{
- u8 cdb[COMMAND_SIZE(MAINTENANCE_OUT)];
+ u8 cdb[MAX_COMMAND_SIZE];
unsigned char stpg_data[8];
int stpg_len = 8;
int req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
@@ -178,7 +178,7 @@ static int submit_stpg(struct scsi_device *sdev, int group_id,
put_unaligned_be16(group_id, &stpg_data[6]);
/* Prepare the command. */
- memset(cdb, 0x0, COMMAND_SIZE(MAINTENANCE_OUT));
+ memset(cdb, 0x0, MAX_COMMAND_SIZE);
cdb[0] = MAINTENANCE_OUT;
cdb[1] = MO_SET_TARGET_PGS;
put_unaligned_be32(stpg_len, &cdb[6]);
@@ -214,8 +214,8 @@ static struct alua_port_group *alua_find_get_pg(char *id_str, size_t id_size,
/*
* alua_alloc_pg - Allocate a new port_group structure
* @sdev: scsi device
- * @h: alua device_handler data
* @group_id: port group id
+ * @tpgs: target port group settings
*
* Allocate a new port_group structure for a given
* device.
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index 6a2792f3a37e..95c47909a58f 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -249,7 +249,7 @@ static int send_trespass_cmd(struct scsi_device *sdev,
struct clariion_dh_data *csdev)
{
unsigned char *page22;
- unsigned char cdb[COMMAND_SIZE(MODE_SELECT)];
+ unsigned char cdb[MAX_COMMAND_SIZE];
int err, res = SCSI_DH_OK, len;
struct scsi_sense_hdr sshdr;
u64 req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 7af31a1247ee..d27fabae8ddd 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -533,7 +533,7 @@ static void send_mode_select(struct work_struct *work)
int err = SCSI_DH_OK, retry_cnt = RDAC_RETRY_COUNT;
struct rdac_queue_data *tmp, *qdata;
LIST_HEAD(list);
- unsigned char cdb[COMMAND_SIZE(MODE_SELECT_10)];
+ unsigned char cdb[MAX_COMMAND_SIZE];
struct scsi_sense_hdr sshdr;
unsigned int data_size;
u64 req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index a00d822e3142..6866975b25f3 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -302,16 +302,14 @@ rebuild_sys_tab:
}
-/*
- * scsi_unregister will be called AFTER we return.
- */
-static int adpt_release(struct Scsi_Host *host)
+static void adpt_release(adpt_hba *pHba)
{
- adpt_hba* pHba = (adpt_hba*) host->hostdata[0];
+ struct Scsi_Host *shost = pHba->host;
+
+ scsi_remove_host(shost);
// adpt_i2o_quiesce_hba(pHba);
adpt_i2o_delete_hba(pHba);
- scsi_unregister(host);
- return 0;
+ scsi_host_put(shost);
}
@@ -801,14 +799,17 @@ static int __adpt_reset(struct scsi_cmnd* cmd)
{
adpt_hba* pHba;
int rcode;
+ char name[32];
+
pHba = (adpt_hba*)cmd->device->host->hostdata[0];
- printk(KERN_WARNING"%s: Hba Reset: scsi id %d: tid: %d\n",pHba->name,cmd->device->channel,pHba->channel[cmd->device->channel].tid );
+ strncpy(name, pHba->name, sizeof(name));
+ printk(KERN_WARNING"%s: Hba Reset: scsi id %d: tid: %d\n", name, cmd->device->channel, pHba->channel[cmd->device->channel].tid);
rcode = adpt_hba_reset(pHba);
if(rcode == 0){
- printk(KERN_WARNING"%s: HBA reset complete\n",pHba->name);
+ printk(KERN_WARNING"%s: HBA reset complete\n", name);
return SUCCESS;
} else {
- printk(KERN_WARNING"%s: HBA reset failed (%x)\n",pHba->name, rcode);
+ printk(KERN_WARNING"%s: HBA reset failed (%x)\n", name, rcode);
return FAILED;
}
}
@@ -1087,8 +1088,6 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba)
mutex_lock(&adpt_configuration_lock);
- // scsi_unregister calls our adpt_release which
- // does a quiese
if(pHba->host){
free_irq(pHba->host->irq, pHba);
}
@@ -3595,11 +3594,9 @@ static void __exit adpt_exit(void)
{
adpt_hba *pHba, *next;
- for (pHba = hba_chain; pHba; pHba = pHba->next)
- scsi_remove_host(pHba->host);
for (pHba = hba_chain; pHba; pHba = next) {
next = pHba->next;
- adpt_release(pHba->host);
+ adpt_release(pHba);
}
}
diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h
index 1fa345ab8ecb..dfc8d2eaa09e 100644
--- a/drivers/scsi/dpti.h
+++ b/drivers/scsi/dpti.h
@@ -32,7 +32,6 @@ static int adpt_detect(struct scsi_host_template * sht);
static int adpt_queue(struct Scsi_Host *h, struct scsi_cmnd * cmd);
static int adpt_abort(struct scsi_cmnd * cmd);
static int adpt_reset(struct scsi_cmnd* cmd);
-static int adpt_release(struct Scsi_Host *host);
static int adpt_slave_configure(struct scsi_device *);
static const char *adpt_info(struct Scsi_Host *pSHost);
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
deleted file mode 100644
index 6501c330d8c8..000000000000
--- a/drivers/scsi/eata.c
+++ /dev/null
@@ -1,2571 +0,0 @@
-/*
- * eata.c - Low-level driver for EATA/DMA SCSI host adapters.
- *
- * 03 Jun 2003 Rev. 8.10 for linux-2.5.70
- * + Update for new IRQ API.
- * + Use "goto" when appropriate.
- * + Drop eata.h.
- * + Update for new module_param API.
- * + Module parameters can now be specified only in the
- * same format as the kernel boot options.
- *
- * boot option old module param
- * ----------- ------------------
- * addr,... io_port=addr,...
- * lc:[y|n] linked_comm=[1|0]
- * mq:xx max_queue_depth=xx
- * tm:[0|1|2] tag_mode=[0|1|2]
- * et:[y|n] ext_tran=[1|0]
- * rs:[y|n] rev_scan=[1|0]
- * ip:[y|n] isa_probe=[1|0]
- * ep:[y|n] eisa_probe=[1|0]
- * pp:[y|n] pci_probe=[1|0]
- *
- * A valid example using the new parameter format is:
- * modprobe eata "eata=0x7410,0x230,lc:y,tm:0,mq:4,ep:n"
- *
- * which is equivalent to the old format:
- * modprobe eata io_port=0x7410,0x230 linked_comm=1 tag_mode=0 \
- * max_queue_depth=4 eisa_probe=0
- *
- * 12 Feb 2003 Rev. 8.04 for linux 2.5.60
- * + Release irq before calling scsi_register.
- *
- * 12 Nov 2002 Rev. 8.02 for linux 2.5.47
- * + Release driver_lock before calling scsi_register.
- *
- * 11 Nov 2002 Rev. 8.01 for linux 2.5.47
- * + Fixed bios_param and scsicam_bios_param calling parameters.
- *
- * 28 Oct 2002 Rev. 8.00 for linux 2.5.44-ac4
- * + Use new tcq and adjust_queue_depth api.
- * + New command line option (tm:[0-2]) to choose the type of tags:
- * 0 -> disable tagging ; 1 -> simple tags ; 2 -> ordered tags.
- * Default is tm:0 (tagged commands disabled).
- * For compatibility the "tc:" option is an alias of the "tm:"
- * option; tc:n is equivalent to tm:0 and tc:y is equivalent to
- * tm:1.
- * + The tagged_comm module parameter has been removed, use tag_mode
- * instead, equivalent to the "tm:" boot option.
- *
- * 10 Oct 2002 Rev. 7.70 for linux 2.5.42
- * + Foreport from revision 6.70.
- *
- * 25 Jun 2002 Rev. 6.70 for linux 2.4.19
- * + This release is the first one tested on a Big Endian platform:
- * fixed endian-ness problem due to bitfields;
- * fixed endian-ness problem in read_pio.
- * + Added new options for selectively probing ISA, EISA and PCI bus:
- *
- * Boot option Parameter name Default according to
- *
- * ip:[y|n] isa_probe=[1|0] CONFIG_ISA defined
- * ep:[y|n] eisa_probe=[1|0] CONFIG_EISA defined
- * pp:[y|n] pci_probe=[1|0] CONFIG_PCI defined
- *
- * The default action is to perform probing if the corresponding
- * bus is configured and to skip probing otherwise.
- *
- * + If pci_probe is in effect and a list of I/O ports is specified
- * as parameter or boot option, pci_enable_device() is performed
- * on all pci devices matching PCI_CLASS_STORAGE_SCSI.
- *
- * 21 Feb 2002 Rev. 6.52 for linux 2.4.18
- * + Backport from rev. 7.22 (use io_request_lock).
- *
- * 20 Feb 2002 Rev. 7.22 for linux 2.5.5
- * + Remove any reference to virt_to_bus().
- * + Fix pio hang while detecting multiple HBAs.
- * + Fixed a board detection bug: in a system with
- * multiple ISA/EISA boards, all but the first one
- * were erroneously detected as PCI.
- *
- * 01 Jan 2002 Rev. 7.20 for linux 2.5.1
- * + Use the dynamic DMA mapping API.
- *
- * 19 Dec 2001 Rev. 7.02 for linux 2.5.1
- * + Use SCpnt->sc_data_direction if set.
- * + Use sglist.page instead of sglist.address.
- *
- * 11 Dec 2001 Rev. 7.00 for linux 2.5.1
- * + Use host->host_lock instead of io_request_lock.
- *
- * 1 May 2001 Rev. 6.05 for linux 2.4.4
- * + Clean up all pci related routines.
- * + Fix data transfer direction for opcode SEND_CUE_SHEET (0x5d)
- *
- * 30 Jan 2001 Rev. 6.04 for linux 2.4.1
- * + Call pci_resource_start after pci_enable_device.
- *
- * 25 Jan 2001 Rev. 6.03 for linux 2.4.0
- * + "check_region" call replaced by "request_region".
- *
- * 22 Nov 2000 Rev. 6.02 for linux 2.4.0-test11
- * + Return code checked when calling pci_enable_device.
- * + Removed old scsi error handling support.
- * + The obsolete boot option flag eh:n is silently ignored.
- * + Removed error messages while a disk drive is powered up at
- * boot time.
- * + Improved boot messages: all tagged capable device are
- * indicated as "tagged" or "soft-tagged" :
- * - "soft-tagged" means that the driver is trying to do its
- * own tagging (i.e. the tc:y option is in effect);
- * - "tagged" means that the device supports tagged commands,
- * but the driver lets the HBA be responsible for tagging
- * support.
- *
- * 16 Sep 1999 Rev. 5.11 for linux 2.2.12 and 2.3.18
- * + Updated to the new __setup interface for boot command line options.
- * + When loaded as a module, accepts the new parameter boot_options
- * which value is a string with the same format of the kernel boot
- * command line options. A valid example is:
- * modprobe eata 'boot_options="0x7410,0x230,lc:y,tc:n,mq:4"'
- *
- * 9 Sep 1999 Rev. 5.10 for linux 2.2.12 and 2.3.17
- * + 64bit cleanup for Linux/Alpha platform support
- * (contribution from H.J. Lu).
- *
- * 22 Jul 1999 Rev. 5.00 for linux 2.2.10 and 2.3.11
- * + Removed pre-2.2 source code compatibility.
- * + Added call to pci_set_master.
- *
- * 26 Jul 1998 Rev. 4.33 for linux 2.0.35 and 2.1.111
- * + Added command line option (rs:[y|n]) to reverse the scan order
- * of PCI boards. The default is rs:y, which reverses the BIOS order
- * while registering PCI boards. The default value rs:y generates
- * the same order of all previous revisions of this driver.
- * Pls. note that "BIOS order" might have been reversed itself
- * after the 2.1.9x PCI modifications in the linux kernel.
- * The rs value is ignored when the explicit list of addresses
- * is used by the "eata=port0,port1,..." command line option.
- * + Added command line option (et:[y|n]) to force use of extended
- * translation (255 heads, 63 sectors) as disk geometry.
- * The default is et:n, which uses the disk geometry returned
- * by scsicam_bios_param. The default value et:n is compatible with
- * all previous revisions of this driver.
- *
- * 28 May 1998 Rev. 4.32 for linux 2.0.33 and 2.1.104
- * Increased busy timeout from 10 msec. to 200 msec. while
- * processing interrupts.
- *
- * 16 May 1998 Rev. 4.31 for linux 2.0.33 and 2.1.102
- * Improved abort handling during the eh recovery process.
- *
- * 13 May 1998 Rev. 4.30 for linux 2.0.33 and 2.1.101
- * The driver is now fully SMP safe, including the
- * abort and reset routines.
- * Added command line options (eh:[y|n]) to choose between
- * new_eh_code and the old scsi code.
- * If linux version >= 2.1.101 the default is eh:y, while the eh
- * option is ignored for previous releases and the old scsi code
- * is used.
- *
- * 18 Apr 1998 Rev. 4.20 for linux 2.0.33 and 2.1.97
- * Reworked interrupt handler.
- *
- * 11 Apr 1998 rev. 4.05 for linux 2.0.33 and 2.1.95
- * Major reliability improvement: when a batch with overlapping
- * requests is detected, requests are queued one at a time
- * eliminating any possible board or drive reordering.
- *
- * 10 Apr 1998 rev. 4.04 for linux 2.0.33 and 2.1.95
- * Improved SMP support (if linux version >= 2.1.95).
- *
- * 9 Apr 1998 rev. 4.03 for linux 2.0.33 and 2.1.94
- * Added support for new PCI code and IO-APIC remapping of irqs.
- * Performance improvement: when sequential i/o is detected,
- * always use direct sort instead of reverse sort.
- *
- * 4 Apr 1998 rev. 4.02 for linux 2.0.33 and 2.1.92
- * io_port is now unsigned long.
- *
- * 17 Mar 1998 rev. 4.01 for linux 2.0.33 and 2.1.88
- * Use new scsi error handling code (if linux version >= 2.1.88).
- * Use new interrupt code.
- *
- * 12 Sep 1997 rev. 3.11 for linux 2.0.30 and 2.1.55
- * Use of udelay inside the wait loops to avoid timeout
- * problems with fast cpus.
- * Removed check about useless calls to the interrupt service
- * routine (reported on SMP systems only).
- * At initialization time "sorted/unsorted" is displayed instead
- * of "linked/unlinked" to reinforce the fact that "linking" is
- * nothing but "elevator sorting" in the actual implementation.
- *
- * 17 May 1997 rev. 3.10 for linux 2.0.30 and 2.1.38
- * Use of serial_number_at_timeout in abort and reset processing.
- * Use of the __initfunc and __initdata macro in setup code.
- * Minor cleanups in the list_statistics code.
- * Increased controller busy timeout in order to better support
- * slow SCSI devices.
- *
- * 24 Feb 1997 rev. 3.00 for linux 2.0.29 and 2.1.26
- * When loading as a module, parameter passing is now supported
- * both in 2.0 and in 2.1 style.
- * Fixed data transfer direction for some SCSI opcodes.
- * Immediate acknowledge to request sense commands.
- * Linked commands to each disk device are now reordered by elevator
- * sorting. Rare cases in which reordering of write requests could
- * cause wrong results are managed.
- * Fixed spurious timeouts caused by long simple queue tag sequences.
- * New command line option (tm:[0-3]) to choose the type of tags:
- * 0 -> mixed (default); 1 -> simple; 2 -> head; 3 -> ordered.
- *
- * 18 Jan 1997 rev. 2.60 for linux 2.1.21 and 2.0.28
- * Added command line options to enable/disable linked commands
- * (lc:[y|n]), tagged commands (tc:[y|n]) and to set the max queue
- * depth (mq:xx). Default is "eata=lc:n,tc:n,mq:16".
- * Improved command linking.
- * Documented how to setup RAID-0 with DPT SmartRAID boards.
- *
- * 8 Jan 1997 rev. 2.50 for linux 2.1.20 and 2.0.27
- * Added linked command support.
- * Improved detection of PCI boards using ISA base addresses.
- *
- * 3 Dec 1996 rev. 2.40 for linux 2.1.14 and 2.0.27
- * Added support for tagged commands and queue depth adjustment.
- *
- * 22 Nov 1996 rev. 2.30 for linux 2.1.12 and 2.0.26
- * When CONFIG_PCI is defined, BIOS32 is used to include in the
- * list of i/o ports to be probed all the PCI SCSI controllers.
- * The list of i/o ports to be probed can be overwritten by the
- * "eata=port0,port1,...." boot command line option.
- * Scatter/gather lists are now allocated by a number of kmalloc
- * calls, in order to avoid the previous size limit of 64Kb.
- *
- * 16 Nov 1996 rev. 2.20 for linux 2.1.10 and 2.0.25
- * Added support for EATA 2.0C, PCI, multichannel and wide SCSI.
- *
- * 27 Sep 1996 rev. 2.12 for linux 2.1.0
- * Portability cleanups (virtual/bus addressing, little/big endian
- * support).
- *
- * 09 Jul 1996 rev. 2.11 for linux 2.0.4
- * Number of internal retries is now limited.
- *
- * 16 Apr 1996 rev. 2.10 for linux 1.3.90
- * New argument "reset_flags" to the reset routine.
- *
- * 6 Jul 1995 rev. 2.01 for linux 1.3.7
- * Update required by the new /proc/scsi support.
- *
- * 11 Mar 1995 rev. 2.00 for linux 1.2.0
- * Fixed a bug which prevented media change detection for removable
- * disk drives.
- *
- * 23 Feb 1995 rev. 1.18 for linux 1.1.94
- * Added a check for scsi_register returning NULL.
- *
- * 11 Feb 1995 rev. 1.17 for linux 1.1.91
- * Now DEBUG_RESET is disabled by default.
- * Register a board even if it does not assert DMA protocol support
- * (DPT SK2011B does not report correctly the dmasup bit).
- *
- * 9 Feb 1995 rev. 1.16 for linux 1.1.90
- * Use host->wish_block instead of host->block.
- * New list of Data Out SCSI commands.
- *
- * 8 Feb 1995 rev. 1.15 for linux 1.1.89
- * Cleared target_time_out counter while performing a reset.
- * All external symbols renamed to avoid possible name conflicts.
- *
- * 28 Jan 1995 rev. 1.14 for linux 1.1.86
- * Added module support.
- * Log and do a retry when a disk drive returns a target status
- * different from zero on a recovered error.
- *
- * 24 Jan 1995 rev. 1.13 for linux 1.1.85
- * Use optimized board configuration, with a measured performance
- * increase in the range 10%-20% on i/o throughput.
- *
- * 16 Jan 1995 rev. 1.12 for linux 1.1.81
- * Fix mscp structure comments (no functional change).
- * Display a message if check_region detects a port address
- * already in use.
- *
- * 17 Dec 1994 rev. 1.11 for linux 1.1.74
- * Use the scsicam_bios_param routine. This allows an easy
- * migration path from disk partition tables created using
- * different SCSI drivers and non optimal disk geometry.
- *
- * 15 Dec 1994 rev. 1.10 for linux 1.1.74
- * Added support for ISA EATA boards (DPT PM2011, DPT PM2021).
- * The host->block flag is set for all the detected ISA boards.
- * The detect routine no longer enforces LEVEL triggering
- * for EISA boards, it just prints a warning message.
- *
- * 30 Nov 1994 rev. 1.09 for linux 1.1.68
- * Redo i/o on target status CHECK_CONDITION for TYPE_DISK only.
- * Added optional support for using a single board at a time.
- *
- * 18 Nov 1994 rev. 1.08 for linux 1.1.64
- * Forces sg_tablesize = 64 and can_queue = 64 if these
- * values are not correctly detected (DPT PM2012).
- *
- * 14 Nov 1994 rev. 1.07 for linux 1.1.63 Final BETA release.
- * 04 Aug 1994 rev. 1.00 for linux 1.1.39 First BETA release.
- *
- *
- * This driver is based on the CAM (Common Access Method Committee)
- * EATA (Enhanced AT Bus Attachment) rev. 2.0A, using DMA protocol.
- *
- * Copyright (C) 1994-2003 Dario Ballabio (ballabio_dario@emc.com)
- *
- * Alternate email: dario.ballabio@inwind.it, dario.ballabio@tiscalinet.it
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
- *
- */
-
-/*
- *
- * Here is a brief description of the DPT SCSI host adapters.
- * All these boards provide an EATA/DMA compatible programming interface
- * and are fully supported by this driver in any configuration, including
- * multiple SCSI channels:
- *
- * PM2011B/9X - Entry Level ISA
- * PM2021A/9X - High Performance ISA
- * PM2012A Old EISA
- * PM2012B Old EISA
- * PM2022A/9X - Entry Level EISA
- * PM2122A/9X - High Performance EISA
- * PM2322A/9X - Extra High Performance EISA
- * PM3021 - SmartRAID Adapter for ISA
- * PM3222 - SmartRAID Adapter for EISA (PM3222W is 16-bit wide SCSI)
- * PM3224 - SmartRAID Adapter for PCI (PM3224W is 16-bit wide SCSI)
- * PM33340UW - SmartRAID Adapter for PCI ultra wide multichannel
- *
- * The above list is just an indication: as a matter of fact all DPT
- * boards using the EATA/DMA protocol are supported by this driver,
- * since they use exactely the same programming interface.
- *
- * The DPT PM2001 provides only the EATA/PIO interface and hence is not
- * supported by this driver.
- *
- * This code has been tested with up to 3 Distributed Processing Technology
- * PM2122A/9X (DPT SCSI BIOS v002.D1, firmware v05E.0) EISA controllers,
- * in any combination of private and shared IRQ.
- * PCI support has been tested using up to 2 DPT PM3224W (DPT SCSI BIOS
- * v003.D0, firmware v07G.0).
- *
- * DPT SmartRAID boards support "Hardware Array" - a group of disk drives
- * which are all members of the same RAID-0, RAID-1 or RAID-5 array implemented
- * in host adapter hardware. Hardware Arrays are fully compatible with this
- * driver, since they look to it as a single disk drive.
- *
- * WARNING: to create a RAID-0 "Hardware Array" you must select "Other Unix"
- * as the current OS in the DPTMGR "Initial System Installation" menu.
- * Otherwise RAID-0 is generated as an "Array Group" (i.e. software RAID-0),
- * which is not supported by the actual SCSI subsystem.
- * To get the "Array Group" functionality, the Linux MD driver must be used
- * instead of the DPT "Array Group" feature.
- *
- * Multiple ISA, EISA and PCI boards can be configured in the same system.
- * It is suggested to put all the EISA boards on the same IRQ level, all
- * the PCI boards on another IRQ level, while ISA boards cannot share
- * interrupts.
- *
- * If you configure multiple boards on the same IRQ, the interrupt must
- * be _level_ triggered (not _edge_ triggered).
- *
- * This driver detects EATA boards by probes at fixed port addresses,
- * so no BIOS32 or PCI BIOS support is required.
- * The suggested way to detect a generic EATA PCI board is to force on it
- * any unused EISA address, even if there are other controllers on the EISA
- * bus, or even if you system has no EISA bus at all.
- * Do not force any ISA address on EATA PCI boards.
- *
- * If PCI bios support is configured into the kernel, BIOS32 is used to
- * include in the list of i/o ports to be probed all the PCI SCSI controllers.
- *
- * Due to a DPT BIOS "feature", it might not be possible to force an EISA
- * address on more than a single DPT PCI board, so in this case you have to
- * let the PCI BIOS assign the addresses.
- *
- * The sequence of detection probes is:
- *
- * - ISA 0x1F0;
- * - PCI SCSI controllers (only if BIOS32 is available);
- * - EISA/PCI 0x1C88 through 0xFC88 (corresponding to EISA slots 1 to 15);
- * - ISA 0x170, 0x230, 0x330.
- *
- * The above list of detection probes can be totally replaced by the
- * boot command line option: "eata=port0,port1,port2,...", where the
- * port0, port1... arguments are ISA/EISA/PCI addresses to be probed.
- * For example using "eata=0x7410,0x7450,0x230", the driver probes
- * only the two PCI addresses 0x7410 and 0x7450 and the ISA address 0x230,
- * in this order; "eata=0" totally disables this driver.
- *
- * After the optional list of detection probes, other possible command line
- * options are:
- *
- * et:y force use of extended translation (255 heads, 63 sectors);
- * et:n use disk geometry detected by scsicam_bios_param;
- * rs:y reverse scan order while detecting PCI boards;
- * rs:n use BIOS order while detecting PCI boards;
- * lc:y enables linked commands;
- * lc:n disables linked commands;
- * tm:0 disables tagged commands (same as tc:n);
- * tm:1 use simple queue tags (same as tc:y);
- * tm:2 use ordered queue tags (same as tc:2);
- * mq:xx set the max queue depth to the value xx (2 <= xx <= 32).
- *
- * The default value is: "eata=lc:n,mq:16,tm:0,et:n,rs:n".
- * An example using the list of detection probes could be:
- * "eata=0x7410,0x230,lc:y,tm:2,mq:4,et:n".
- *
- * When loading as a module, parameters can be specified as well.
- * The above example would be (use 1 in place of y and 0 in place of n):
- *
- * modprobe eata io_port=0x7410,0x230 linked_comm=1 \
- * max_queue_depth=4 ext_tran=0 tag_mode=2 \
- * rev_scan=1
- *
- * ----------------------------------------------------------------------------
- * In this implementation, linked commands are designed to work with any DISK
- * or CD-ROM, since this linking has only the intent of clustering (time-wise)
- * and reordering by elevator sorting commands directed to each device,
- * without any relation with the actual SCSI protocol between the controller
- * and the device.
- * If Q is the queue depth reported at boot time for each device (also named
- * cmds/lun) and Q > 2, whenever there is already an active command to the
- * device all other commands to the same device (up to Q-1) are kept waiting
- * in the elevator sorting queue. When the active command completes, the
- * commands in this queue are sorted by sector address. The sort is chosen
- * between increasing or decreasing by minimizing the seek distance between
- * the sector of the commands just completed and the sector of the first
- * command in the list to be sorted.
- * Trivial math assures that the unsorted average seek distance when doing
- * random seeks over S sectors is S/3.
- * When (Q-1) requests are uniformly distributed over S sectors, the average
- * distance between two adjacent requests is S/((Q-1) + 1), so the sorted
- * average seek distance for (Q-1) random requests over S sectors is S/Q.
- * The elevator sorting hence divides the seek distance by a factor Q/3.
- * The above pure geometric remarks are valid in all cases and the
- * driver effectively reduces the seek distance by the predicted factor
- * when there are Q concurrent read i/o operations on the device, but this
- * does not necessarily results in a noticeable performance improvement:
- * your mileage may vary....
- *
- * Note: command reordering inside a batch of queued commands could cause
- * wrong results only if there is at least one write request and the
- * intersection (sector-wise) of all requests is not empty.
- * When the driver detects a batch including overlapping requests
- * (a really rare event) strict serial (pid) order is enforced.
- * ----------------------------------------------------------------------------
- * The extended translation option (et:y) is useful when using large physical
- * disks/arrays. It could also be useful when switching between Adaptec boards
- * and DPT boards without reformatting the disk.
- * When a boot disk is partitioned with extended translation, in order to
- * be able to boot it with a DPT board is could be necessary to add to
- * lilo.conf additional commands as in the following example:
- *
- * fix-table
- * disk=/dev/sda bios=0x80 sectors=63 heads=128 cylindres=546
- *
- * where the above geometry should be replaced with the one reported at
- * power up by the DPT controller.
- * ----------------------------------------------------------------------------
- *
- * The boards are named EATA0, EATA1,... according to the detection order.
- *
- * In order to support multiple ISA boards in a reliable way,
- * the driver sets host->wish_block = 1 for all ISA boards.
- */
-
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/proc_fs.h>
-#include <linux/blkdev.h>
-#include <linux/interrupt.h>
-#include <linux/stat.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ctype.h>
-#include <linux/spinlock.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-#include <asm/byteorder.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/scsicam.h>
-
-static int eata2x_detect(struct scsi_host_template *);
-static int eata2x_release(struct Scsi_Host *);
-static int eata2x_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
-static int eata2x_eh_abort(struct scsi_cmnd *);
-static int eata2x_eh_host_reset(struct scsi_cmnd *);
-static int eata2x_bios_param(struct scsi_device *, struct block_device *,
- sector_t, int *);
-static int eata2x_slave_configure(struct scsi_device *);
-
-static struct scsi_host_template driver_template = {
- .name = "EATA/DMA 2.0x rev. 8.10.00 ",
- .detect = eata2x_detect,
- .release = eata2x_release,
- .queuecommand = eata2x_queuecommand,
- .eh_abort_handler = eata2x_eh_abort,
- .eh_host_reset_handler = eata2x_eh_host_reset,
- .bios_param = eata2x_bios_param,
- .slave_configure = eata2x_slave_configure,
- .this_id = 7,
- .unchecked_isa_dma = 1,
- .use_clustering = ENABLE_CLUSTERING,
-};
-
-#if !defined(__BIG_ENDIAN_BITFIELD) && !defined(__LITTLE_ENDIAN_BITFIELD)
-#error "Adjust your <asm/byteorder.h> defines"
-#endif
-
-/* Subversion values */
-#define ISA 0
-#define ESA 1
-
-#undef FORCE_CONFIG
-
-#undef DEBUG_LINKED_COMMANDS
-#undef DEBUG_DETECT
-#undef DEBUG_PCI_DETECT
-#undef DEBUG_INTERRUPT
-#undef DEBUG_RESET
-#undef DEBUG_GENERATE_ERRORS
-#undef DEBUG_GENERATE_ABORTS
-#undef DEBUG_GEOMETRY
-
-#define MAX_ISA 4
-#define MAX_VESA 0
-#define MAX_EISA 15
-#define MAX_PCI 16
-#define MAX_BOARDS (MAX_ISA + MAX_VESA + MAX_EISA + MAX_PCI)
-#define MAX_CHANNEL 4
-#define MAX_LUN 32
-#define MAX_TARGET 32
-#define MAX_MAILBOXES 64
-#define MAX_SGLIST 64
-#define MAX_LARGE_SGLIST 122
-#define MAX_INTERNAL_RETRIES 64
-#define MAX_CMD_PER_LUN 2
-#define MAX_TAGGED_CMD_PER_LUN (MAX_MAILBOXES - MAX_CMD_PER_LUN)
-
-#define SKIP ULONG_MAX
-#define FREE 0
-#define IN_USE 1
-#define LOCKED 2
-#define IN_RESET 3
-#define IGNORE 4
-#define READY 5
-#define ABORTING 6
-#define NO_DMA 0xff
-#define MAXLOOP 10000
-#define TAG_DISABLED 0
-#define TAG_SIMPLE 1
-#define TAG_ORDERED 2
-
-#define REG_CMD 7
-#define REG_STATUS 7
-#define REG_AUX_STATUS 8
-#define REG_DATA 0
-#define REG_DATA2 1
-#define REG_SEE 6
-#define REG_LOW 2
-#define REG_LM 3
-#define REG_MID 4
-#define REG_MSB 5
-#define REGION_SIZE 9UL
-#define MAX_ISA_ADDR 0x03ff
-#define MIN_EISA_ADDR 0x1c88
-#define MAX_EISA_ADDR 0xfc88
-#define BSY_ASSERTED 0x80
-#define DRQ_ASSERTED 0x08
-#define ABSY_ASSERTED 0x01
-#define IRQ_ASSERTED 0x02
-#define READ_CONFIG_PIO 0xf0
-#define SET_CONFIG_PIO 0xf1
-#define SEND_CP_PIO 0xf2
-#define RECEIVE_SP_PIO 0xf3
-#define TRUNCATE_XFR_PIO 0xf4
-#define RESET_PIO 0xf9
-#define READ_CONFIG_DMA 0xfd
-#define SET_CONFIG_DMA 0xfe
-#define SEND_CP_DMA 0xff
-#define ASOK 0x00
-#define ASST 0x01
-
-#define YESNO(a) ((a) ? 'y' : 'n')
-#define TLDEV(type) ((type) == TYPE_DISK || (type) == TYPE_ROM)
-
-/* "EATA", in Big Endian format */
-#define EATA_SIG_BE 0x45415441
-
-/* Number of valid bytes in the board config structure for EATA 2.0x */
-#define EATA_2_0A_SIZE 28
-#define EATA_2_0B_SIZE 30
-#define EATA_2_0C_SIZE 34
-
-/* Board info structure */
-struct eata_info {
- u_int32_t data_len; /* Number of valid bytes after this field */
- u_int32_t sign; /* ASCII "EATA" signature */
-
-#if defined(__BIG_ENDIAN_BITFIELD)
- unchar version : 4,
- : 4;
- unchar haaval : 1,
- ata : 1,
- drqvld : 1,
- dmasup : 1,
- morsup : 1,
- trnxfr : 1,
- tarsup : 1,
- ocsena : 1;
-#else
- unchar : 4, /* unused low nibble */
- version : 4; /* EATA version, should be 0x1 */
- unchar ocsena : 1, /* Overlap Command Support Enabled */
- tarsup : 1, /* Target Mode Supported */
- trnxfr : 1, /* Truncate Transfer Cmd NOT Necessary */
- morsup : 1, /* More Supported */
- dmasup : 1, /* DMA Supported */
- drqvld : 1, /* DRQ Index (DRQX) is valid */
- ata : 1, /* This is an ATA device */
- haaval : 1; /* Host Adapter Address Valid */
-#endif
-
- ushort cp_pad_len; /* Number of pad bytes after cp_len */
- unchar host_addr[4]; /* Host Adapter SCSI ID for channels 3, 2, 1, 0 */
- u_int32_t cp_len; /* Number of valid bytes in cp */
- u_int32_t sp_len; /* Number of valid bytes in sp */
- ushort queue_size; /* Max number of cp that can be queued */
- ushort unused;
- ushort scatt_size; /* Max number of entries in scatter/gather table */
-
-#if defined(__BIG_ENDIAN_BITFIELD)
- unchar drqx : 2,
- second : 1,
- irq_tr : 1,
- irq : 4;
- unchar sync;
- unchar : 4,
- res1 : 1,
- large_sg : 1,
- forcaddr : 1,
- isaena : 1;
- unchar max_chan : 3,
- max_id : 5;
- unchar max_lun;
- unchar eisa : 1,
- pci : 1,
- idquest : 1,
- m1 : 1,
- : 4;
-#else
- unchar irq : 4, /* Interrupt Request assigned to this controller */
- irq_tr : 1, /* 0 for edge triggered, 1 for level triggered */
- second : 1, /* 1 if this is a secondary (not primary) controller */
- drqx : 2; /* DRQ Index (0=DMA0, 1=DMA7, 2=DMA6, 3=DMA5) */
- unchar sync; /* 1 if scsi target id 7...0 is running sync scsi */
-
- /* Structure extension defined in EATA 2.0B */
- unchar isaena : 1, /* ISA i/o addressing is disabled/enabled */
- forcaddr : 1, /* Port address has been forced */
- large_sg : 1, /* 1 if large SG lists are supported */
- res1 : 1,
- : 4;
- unchar max_id : 5, /* Max SCSI target ID number */
- max_chan : 3; /* Max SCSI channel number on this board */
-
- /* Structure extension defined in EATA 2.0C */
- unchar max_lun; /* Max SCSI LUN number */
- unchar
- : 4,
- m1 : 1, /* This is a PCI with an M1 chip installed */
- idquest : 1, /* RAIDNUM returned is questionable */
- pci : 1, /* This board is PCI */
- eisa : 1; /* This board is EISA */
-#endif
-
- unchar raidnum; /* Uniquely identifies this HBA in a system */
- unchar notused;
-
- ushort ipad[247];
-};
-
-/* Board config structure */
-struct eata_config {
- ushort len; /* Number of bytes following this field */
-
-#if defined(__BIG_ENDIAN_BITFIELD)
- unchar : 4,
- tarena : 1,
- mdpena : 1,
- ocena : 1,
- edis : 1;
-#else
- unchar edis : 1, /* Disable EATA interface after config command */
- ocena : 1, /* Overlapped Commands Enabled */
- mdpena : 1, /* Transfer all Modified Data Pointer Messages */
- tarena : 1, /* Target Mode Enabled for this controller */
- : 4;
-#endif
- unchar cpad[511];
-};
-
-/* Returned status packet structure */
-struct mssp {
-#if defined(__BIG_ENDIAN_BITFIELD)
- unchar eoc : 1,
- adapter_status : 7;
-#else
- unchar adapter_status : 7, /* State related to current command */
- eoc : 1; /* End Of Command (1 = command completed) */
-#endif
- unchar target_status; /* SCSI status received after data transfer */
- unchar unused[2];
- u_int32_t inv_res_len; /* Number of bytes not transferred */
- u_int32_t cpp_index; /* Index of address set in cp */
- char mess[12];
-};
-
-struct sg_list {
- unsigned int address; /* Segment Address */
- unsigned int num_bytes; /* Segment Length */
-};
-
-/* MailBox SCSI Command Packet */
-struct mscp {
-#if defined(__BIG_ENDIAN_BITFIELD)
- unchar din : 1,
- dout : 1,
- interp : 1,
- : 1,
- sg : 1,
- reqsen :1,
- init : 1,
- sreset : 1;
- unchar sense_len;
- unchar unused[3];
- unchar : 7,
- fwnest : 1;
- unchar : 5,
- hbaci : 1,
- iat : 1,
- phsunit : 1;
- unchar channel : 3,
- target : 5;
- unchar one : 1,
- dispri : 1,
- luntar : 1,
- lun : 5;
-#else
- unchar sreset :1, /* SCSI Bus Reset Signal should be asserted */
- init :1, /* Re-initialize controller and self test */
- reqsen :1, /* Transfer Request Sense Data to addr using DMA */
- sg :1, /* Use Scatter/Gather */
- :1,
- interp :1, /* The controller interprets cp, not the target */
- dout :1, /* Direction of Transfer is Out (Host to Target) */
- din :1; /* Direction of Transfer is In (Target to Host) */
- unchar sense_len; /* Request Sense Length */
- unchar unused[3];
- unchar fwnest : 1, /* Send command to a component of an Array Group */
- : 7;
- unchar phsunit : 1, /* Send to Target Physical Unit (bypass RAID) */
- iat : 1, /* Inhibit Address Translation */
- hbaci : 1, /* Inhibit HBA Caching for this command */
- : 5;
- unchar target : 5, /* SCSI target ID */
- channel : 3; /* SCSI channel number */
- unchar lun : 5, /* SCSI logical unit number */
- luntar : 1, /* This cp is for Target (not LUN) */
- dispri : 1, /* Disconnect Privilege granted */
- one : 1; /* 1 */
-#endif
-
- unchar mess[3]; /* Massage to/from Target */
- unchar cdb[12]; /* Command Descriptor Block */
- u_int32_t data_len; /* If sg=0 Data Length, if sg=1 sglist length */
- u_int32_t cpp_index; /* Index of address to be returned in sp */
- u_int32_t data_address; /* If sg=0 Data Address, if sg=1 sglist address */
- u_int32_t sp_dma_addr; /* Address where sp is DMA'ed when cp completes */
- u_int32_t sense_addr; /* Address where Sense Data is DMA'ed on error */
-
- /* Additional fields begin here. */
- struct scsi_cmnd *SCpnt;
-
- /* All the cp structure is zero filled by queuecommand except the
- following CP_TAIL_SIZE bytes, initialized by detect */
- dma_addr_t cp_dma_addr; /* dma handle for this cp structure */
- struct sg_list *sglist; /* pointer to the allocated SG list */
-};
-
-#define CP_TAIL_SIZE (sizeof(struct sglist *) + sizeof(dma_addr_t))
-
-struct hostdata {
- struct mscp cp[MAX_MAILBOXES]; /* Mailboxes for this board */
- unsigned int cp_stat[MAX_MAILBOXES]; /* FREE, IN_USE, LOCKED, IN_RESET */
- unsigned int last_cp_used; /* Index of last mailbox used */
- unsigned int iocount; /* Total i/o done for this board */
- int board_number; /* Number of this board */
- char board_name[16]; /* Name of this board */
- int in_reset; /* True if board is doing a reset */
- int target_to[MAX_TARGET][MAX_CHANNEL]; /* N. of timeout errors on target */
- int target_redo[MAX_TARGET][MAX_CHANNEL]; /* If 1 redo i/o on target */
- unsigned int retries; /* Number of internal retries */
- unsigned long last_retried_pid; /* Pid of last retried command */
- unsigned char subversion; /* Bus type, either ISA or EISA/PCI */
- unsigned char protocol_rev; /* EATA 2.0 rev., 'A' or 'B' or 'C' */
- unsigned char is_pci; /* 1 is bus type is PCI */
- struct pci_dev *pdev; /* pdev for PCI bus, NULL otherwise */
- struct mssp *sp_cpu_addr; /* cpu addr for DMA buffer sp */
- dma_addr_t sp_dma_addr; /* dma handle for DMA buffer sp */
- struct mssp sp; /* Local copy of sp buffer */
-};
-
-static struct Scsi_Host *sh[MAX_BOARDS];
-static const char *driver_name = "EATA";
-static char sha[MAX_BOARDS];
-
-/* Initialize num_boards so that ihdlr can work while detect is in progress */
-static unsigned int num_boards = MAX_BOARDS;
-
-static unsigned long io_port[] = {
-
- /* Space for MAX_INT_PARAM ports usable while loading as a module */
- SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP,
- SKIP, SKIP,
-
- /* First ISA */
- 0x1f0,
-
- /* Space for MAX_PCI ports possibly reported by PCI_BIOS */
- SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP,
- SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP,
-
- /* MAX_EISA ports */
- 0x1c88, 0x2c88, 0x3c88, 0x4c88, 0x5c88, 0x6c88, 0x7c88, 0x8c88,
- 0x9c88, 0xac88, 0xbc88, 0xcc88, 0xdc88, 0xec88, 0xfc88,
-
- /* Other (MAX_ISA - 1) ports */
- 0x170, 0x230, 0x330,
-
- /* End of list */
- 0x0
-};
-
-/* Device is Big Endian */
-#define H2DEV(x) cpu_to_be32(x)
-#define DEV2H(x) be32_to_cpu(x)
-#define H2DEV16(x) cpu_to_be16(x)
-#define DEV2H16(x) be16_to_cpu(x)
-
-/* But transfer orientation from the 16 bit data register is Little Endian */
-#define REG2H(x) le16_to_cpu(x)
-
-static irqreturn_t do_interrupt_handler(int, void *);
-static void flush_dev(struct scsi_device *, unsigned long, struct hostdata *,
- unsigned int);
-static int do_trace = 0;
-static int setup_done = 0;
-static int link_statistics;
-static int ext_tran = 0;
-static int rev_scan = 1;
-
-#if defined(CONFIG_SCSI_EATA_TAGGED_QUEUE)
-static int tag_mode = TAG_SIMPLE;
-#else
-static int tag_mode = TAG_DISABLED;
-#endif
-
-#if defined(CONFIG_SCSI_EATA_LINKED_COMMANDS)
-static int linked_comm = 1;
-#else
-static int linked_comm = 0;
-#endif
-
-#if defined(CONFIG_SCSI_EATA_MAX_TAGS)
-static int max_queue_depth = CONFIG_SCSI_EATA_MAX_TAGS;
-#else
-static int max_queue_depth = MAX_CMD_PER_LUN;
-#endif
-
-#if defined(CONFIG_ISA)
-static int isa_probe = 1;
-#else
-static int isa_probe = 0;
-#endif
-
-#if defined(CONFIG_EISA)
-static int eisa_probe = 1;
-#else
-static int eisa_probe = 0;
-#endif
-
-#if defined(CONFIG_PCI)
-static int pci_probe = 1;
-#else
-static int pci_probe = 0;
-#endif
-
-#define MAX_INT_PARAM 10
-#define MAX_BOOT_OPTIONS_SIZE 256
-static char boot_options[MAX_BOOT_OPTIONS_SIZE];
-
-#if defined(MODULE)
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-
-module_param_string(eata, boot_options, MAX_BOOT_OPTIONS_SIZE, 0);
-MODULE_PARM_DESC(eata, " equivalent to the \"eata=...\" kernel boot option."
- " Example: modprobe eata \"eata=0x7410,0x230,lc:y,tm:0,mq:4,ep:n\"");
-MODULE_AUTHOR("Dario Ballabio");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("EATA/DMA SCSI Driver");
-
-#endif
-
-static int eata2x_slave_configure(struct scsi_device *dev)
-{
- int tqd, utqd;
- char *tag_suffix, *link_suffix;
-
- utqd = MAX_CMD_PER_LUN;
- tqd = max_queue_depth;
-
- if (TLDEV(dev->type) && dev->tagged_supported) {
- if (tag_mode == TAG_SIMPLE) {
- tag_suffix = ", simple tags";
- } else if (tag_mode == TAG_ORDERED) {
- tag_suffix = ", ordered tags";
- } else {
- tag_suffix = ", no tags";
- }
- scsi_change_queue_depth(dev, tqd);
- } else if (TLDEV(dev->type) && linked_comm) {
- scsi_change_queue_depth(dev, tqd);
- tag_suffix = ", untagged";
- } else {
- scsi_change_queue_depth(dev, utqd);
- tag_suffix = "";
- }
-
- if (TLDEV(dev->type) && linked_comm && dev->queue_depth > 2)
- link_suffix = ", sorted";
- else if (TLDEV(dev->type))
- link_suffix = ", unsorted";
- else
- link_suffix = "";
-
- sdev_printk(KERN_INFO, dev,
- "cmds/lun %d%s%s.\n",
- dev->queue_depth, link_suffix, tag_suffix);
-
- return 0;
-}
-
-static int wait_on_busy(unsigned long iobase, unsigned int loop)
-{
- while (inb(iobase + REG_AUX_STATUS) & ABSY_ASSERTED) {
- udelay(1L);
- if (--loop == 0)
- return 1;
- }
- return 0;
-}
-
-static int do_dma(unsigned long iobase, unsigned long addr, unchar cmd)
-{
- unsigned char *byaddr;
- unsigned long devaddr;
-
- if (wait_on_busy(iobase, (addr ? MAXLOOP * 100 : MAXLOOP)))
- return 1;
-
- if (addr) {
- devaddr = H2DEV(addr);
- byaddr = (unsigned char *)&devaddr;
- outb(byaddr[3], iobase + REG_LOW);
- outb(byaddr[2], iobase + REG_LM);
- outb(byaddr[1], iobase + REG_MID);
- outb(byaddr[0], iobase + REG_MSB);
- }
-
- outb(cmd, iobase + REG_CMD);
- return 0;
-}
-
-static int read_pio(unsigned long iobase, ushort * start, ushort * end)
-{
- unsigned int loop = MAXLOOP;
- ushort *p;
-
- for (p = start; p <= end; p++) {
- while (!(inb(iobase + REG_STATUS) & DRQ_ASSERTED)) {
- udelay(1L);
- if (--loop == 0)
- return 1;
- }
- loop = MAXLOOP;
- *p = REG2H(inw(iobase));
- }
-
- return 0;
-}
-
-static struct pci_dev *get_pci_dev(unsigned long port_base)
-{
-#if defined(CONFIG_PCI)
- unsigned int addr;
- struct pci_dev *dev = NULL;
-
- while ((dev = pci_get_class(PCI_CLASS_STORAGE_SCSI << 8, dev))) {
- addr = pci_resource_start(dev, 0);
-
-#if defined(DEBUG_PCI_DETECT)
- printk("%s: get_pci_dev, bus %d, devfn 0x%x, addr 0x%x.\n",
- driver_name, dev->bus->number, dev->devfn, addr);
-#endif
-
- /* we are in so much trouble for a pci hotplug system with this driver
- * anyway, so doing this at least lets people unload the driver and not
- * cause memory problems, but in general this is a bad thing to do (this
- * driver needs to be converted to the proper PCI api someday... */
- pci_dev_put(dev);
- if (addr + PCI_BASE_ADDRESS_0 == port_base)
- return dev;
- }
-#endif /* end CONFIG_PCI */
- return NULL;
-}
-
-static void enable_pci_ports(void)
-{
-#if defined(CONFIG_PCI)
- struct pci_dev *dev = NULL;
-
- while ((dev = pci_get_class(PCI_CLASS_STORAGE_SCSI << 8, dev))) {
-#if defined(DEBUG_PCI_DETECT)
- printk("%s: enable_pci_ports, bus %d, devfn 0x%x.\n",
- driver_name, dev->bus->number, dev->devfn);
-#endif
-
- if (pci_enable_device(dev))
- printk
- ("%s: warning, pci_enable_device failed, bus %d devfn 0x%x.\n",
- driver_name, dev->bus->number, dev->devfn);
- }
-
-#endif /* end CONFIG_PCI */
-}
-
-static int port_detect(unsigned long port_base, unsigned int j,
- struct scsi_host_template *tpnt)
-{
- unsigned char irq, dma_channel, subversion, i, is_pci = 0;
- unsigned char protocol_rev;
- struct eata_info info;
- char *bus_type, dma_name[16];
- struct pci_dev *pdev;
- /* Allowed DMA channels for ISA (0 indicates reserved) */
- unsigned char dma_channel_table[4] = { 5, 6, 7, 0 };
- struct Scsi_Host *shost;
- struct hostdata *ha;
- char name[16];
-
- sprintf(name, "%s%d", driver_name, j);
-
- if (!request_region(port_base, REGION_SIZE, driver_name)) {
-#if defined(DEBUG_DETECT)
- printk("%s: address 0x%03lx in use, skipping probe.\n", name,
- port_base);
-#endif
- goto fail;
- }
-
- if (do_dma(port_base, 0, READ_CONFIG_PIO)) {
-#if defined(DEBUG_DETECT)
- printk("%s: detect, do_dma failed at 0x%03lx.\n", name,
- port_base);
-#endif
- goto freelock;
- }
-
- /* Read the info structure */
- if (read_pio(port_base, (ushort *) & info, (ushort *) & info.ipad[0])) {
-#if defined(DEBUG_DETECT)
- printk("%s: detect, read_pio failed at 0x%03lx.\n", name,
- port_base);
-#endif
- goto freelock;
- }
-
- info.data_len = DEV2H(info.data_len);
- info.sign = DEV2H(info.sign);
- info.cp_pad_len = DEV2H16(info.cp_pad_len);
- info.cp_len = DEV2H(info.cp_len);
- info.sp_len = DEV2H(info.sp_len);
- info.scatt_size = DEV2H16(info.scatt_size);
- info.queue_size = DEV2H16(info.queue_size);
-
- /* Check the controller "EATA" signature */
- if (info.sign != EATA_SIG_BE) {
-#if defined(DEBUG_DETECT)
- printk("%s: signature 0x%04x discarded.\n", name, info.sign);
-#endif
- goto freelock;
- }
-
- if (info.data_len < EATA_2_0A_SIZE) {
- printk
- ("%s: config structure size (%d bytes) too short, detaching.\n",
- name, info.data_len);
- goto freelock;
- } else if (info.data_len == EATA_2_0A_SIZE)
- protocol_rev = 'A';
- else if (info.data_len == EATA_2_0B_SIZE)
- protocol_rev = 'B';
- else
- protocol_rev = 'C';
-
- if (protocol_rev != 'A' && info.forcaddr) {
- printk("%s: warning, port address has been forced.\n", name);
- bus_type = "PCI";
- is_pci = 1;
- subversion = ESA;
- } else if (port_base > MAX_EISA_ADDR
- || (protocol_rev == 'C' && info.pci)) {
- bus_type = "PCI";
- is_pci = 1;
- subversion = ESA;
- } else if (port_base >= MIN_EISA_ADDR
- || (protocol_rev == 'C' && info.eisa)) {
- bus_type = "EISA";
- subversion = ESA;
- } else if (protocol_rev == 'C' && !info.eisa && !info.pci) {
- bus_type = "ISA";
- subversion = ISA;
- } else if (port_base > MAX_ISA_ADDR) {
- bus_type = "PCI";
- is_pci = 1;
- subversion = ESA;
- } else {
- bus_type = "ISA";
- subversion = ISA;
- }
-
- if (!info.haaval || info.ata) {
- printk
- ("%s: address 0x%03lx, unusable %s board (%d%d), detaching.\n",
- name, port_base, bus_type, info.haaval, info.ata);
- goto freelock;
- }
-
- if (info.drqvld) {
- if (subversion == ESA)
- printk("%s: warning, weird %s board using DMA.\n", name,
- bus_type);
-
- subversion = ISA;
- dma_channel = dma_channel_table[3 - info.drqx];
- } else {
- if (subversion == ISA)
- printk("%s: warning, weird %s board not using DMA.\n",
- name, bus_type);
-
- subversion = ESA;
- dma_channel = NO_DMA;
- }
-
- if (!info.dmasup)
- printk("%s: warning, DMA protocol support not asserted.\n",
- name);
-
- irq = info.irq;
-
- if (subversion == ESA && !info.irq_tr)
- printk
- ("%s: warning, LEVEL triggering is suggested for IRQ %u.\n",
- name, irq);
-
- if (is_pci) {
- pdev = get_pci_dev(port_base);
- if (!pdev)
- printk
- ("%s: warning, failed to get pci_dev structure.\n",
- name);
- } else
- pdev = NULL;
-
- if (pdev && (irq != pdev->irq)) {
- printk("%s: IRQ %u mapped to IO-APIC IRQ %u.\n", name, irq,
- pdev->irq);
- irq = pdev->irq;
- }
-
- /* Board detected, allocate its IRQ */
- if (request_irq(irq, do_interrupt_handler,
- (subversion == ESA) ? IRQF_SHARED : 0,
- driver_name, (void *)&sha[j])) {
- printk("%s: unable to allocate IRQ %u, detaching.\n", name,
- irq);
- goto freelock;
- }
-
- if (subversion == ISA && request_dma(dma_channel, driver_name)) {
- printk("%s: unable to allocate DMA channel %u, detaching.\n",
- name, dma_channel);
- goto freeirq;
- }
-#if defined(FORCE_CONFIG)
- {
- struct eata_config *cf;
- dma_addr_t cf_dma_addr;
-
- cf = pci_zalloc_consistent(pdev, sizeof(struct eata_config),
- &cf_dma_addr);
-
- if (!cf) {
- printk
- ("%s: config, pci_alloc_consistent failed, detaching.\n",
- name);
- goto freedma;
- }
-
- /* Set board configuration */
- cf->len = (ushort) H2DEV16((ushort) 510);
- cf->ocena = 1;
-
- if (do_dma(port_base, cf_dma_addr, SET_CONFIG_DMA)) {
- printk
- ("%s: busy timeout sending configuration, detaching.\n",
- name);
- pci_free_consistent(pdev, sizeof(struct eata_config),
- cf, cf_dma_addr);
- goto freedma;
- }
-
- }
-#endif
-
- sh[j] = shost = scsi_register(tpnt, sizeof(struct hostdata));
- if (shost == NULL) {
- printk("%s: unable to register host, detaching.\n", name);
- goto freedma;
- }
-
- shost->io_port = port_base;
- shost->unique_id = port_base;
- shost->n_io_port = REGION_SIZE;
- shost->dma_channel = dma_channel;
- shost->irq = irq;
- shost->sg_tablesize = (ushort) info.scatt_size;
- shost->this_id = (ushort) info.host_addr[3];
- shost->can_queue = (ushort) info.queue_size;
- shost->cmd_per_lun = MAX_CMD_PER_LUN;
-
- ha = (struct hostdata *)shost->hostdata;
-
- memset(ha, 0, sizeof(struct hostdata));
- ha->subversion = subversion;
- ha->protocol_rev = protocol_rev;
- ha->is_pci = is_pci;
- ha->pdev = pdev;
- ha->board_number = j;
-
- if (ha->subversion == ESA)
- shost->unchecked_isa_dma = 0;
- else {
- unsigned long flags;
- shost->unchecked_isa_dma = 1;
-
- flags = claim_dma_lock();
- disable_dma(dma_channel);
- clear_dma_ff(dma_channel);
- set_dma_mode(dma_channel, DMA_MODE_CASCADE);
- enable_dma(dma_channel);
- release_dma_lock(flags);
-
- }
-
- strcpy(ha->board_name, name);
-
- /* DPT PM2012 does not allow to detect sg_tablesize correctly */
- if (shost->sg_tablesize > MAX_SGLIST || shost->sg_tablesize < 2) {
- printk("%s: detect, wrong n. of SG lists %d, fixed.\n",
- ha->board_name, shost->sg_tablesize);
- shost->sg_tablesize = MAX_SGLIST;
- }
-
- /* DPT PM2012 does not allow to detect can_queue correctly */
- if (shost->can_queue > MAX_MAILBOXES || shost->can_queue < 2) {
- printk("%s: detect, wrong n. of mbox %d, fixed.\n",
- ha->board_name, shost->can_queue);
- shost->can_queue = MAX_MAILBOXES;
- }
-
- if (protocol_rev != 'A') {
- if (info.max_chan > 0 && info.max_chan < MAX_CHANNEL)
- shost->max_channel = info.max_chan;
-
- if (info.max_id > 7 && info.max_id < MAX_TARGET)
- shost->max_id = info.max_id + 1;
-
- if (info.large_sg && shost->sg_tablesize == MAX_SGLIST)
- shost->sg_tablesize = MAX_LARGE_SGLIST;
- }
-
- if (protocol_rev == 'C') {
- if (info.max_lun > 7 && info.max_lun < MAX_LUN)
- shost->max_lun = info.max_lun + 1;
- }
-
- if (dma_channel == NO_DMA)
- sprintf(dma_name, "%s", "BMST");
- else
- sprintf(dma_name, "DMA %u", dma_channel);
-
- for (i = 0; i < shost->can_queue; i++)
- ha->cp[i].cp_dma_addr = pci_map_single(ha->pdev,
- &ha->cp[i],
- sizeof(struct mscp),
- PCI_DMA_BIDIRECTIONAL);
-
- for (i = 0; i < shost->can_queue; i++) {
- size_t sz = shost->sg_tablesize *sizeof(struct sg_list);
- gfp_t gfp_mask = (shost->unchecked_isa_dma ? GFP_DMA : 0) | GFP_ATOMIC;
- ha->cp[i].sglist = kmalloc(sz, gfp_mask);
- if (!ha->cp[i].sglist) {
- printk
- ("%s: kmalloc SGlist failed, mbox %d, detaching.\n",
- ha->board_name, i);
- goto release;
- }
- }
-
- if (!(ha->sp_cpu_addr = pci_alloc_consistent(ha->pdev,
- sizeof(struct mssp),
- &ha->sp_dma_addr))) {
- printk("%s: pci_alloc_consistent failed, detaching.\n", ha->board_name);
- goto release;
- }
-
- if (max_queue_depth > MAX_TAGGED_CMD_PER_LUN)
- max_queue_depth = MAX_TAGGED_CMD_PER_LUN;
-
- if (max_queue_depth < MAX_CMD_PER_LUN)
- max_queue_depth = MAX_CMD_PER_LUN;
-
- if (tag_mode != TAG_DISABLED && tag_mode != TAG_SIMPLE)
- tag_mode = TAG_ORDERED;
-
- if (j == 0) {
- printk
- ("EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio.\n");
- printk
- ("%s config options -> tm:%d, lc:%c, mq:%d, rs:%c, et:%c, "
- "ip:%c, ep:%c, pp:%c.\n", driver_name, tag_mode,
- YESNO(linked_comm), max_queue_depth, YESNO(rev_scan),
- YESNO(ext_tran), YESNO(isa_probe), YESNO(eisa_probe),
- YESNO(pci_probe));
- }
-
- printk("%s: 2.0%c, %s 0x%03lx, IRQ %u, %s, SG %d, MB %d.\n",
- ha->board_name, ha->protocol_rev, bus_type,
- (unsigned long)shost->io_port, shost->irq, dma_name,
- shost->sg_tablesize, shost->can_queue);
-
- if (shost->max_id > 8 || shost->max_lun > 8)
- printk
- ("%s: wide SCSI support enabled, max_id %u, max_lun %llu.\n",
- ha->board_name, shost->max_id, shost->max_lun);
-
- for (i = 0; i <= shost->max_channel; i++)
- printk("%s: SCSI channel %u enabled, host target ID %d.\n",
- ha->board_name, i, info.host_addr[3 - i]);
-
-#if defined(DEBUG_DETECT)
- printk("%s: Vers. 0x%x, ocs %u, tar %u, trnxfr %u, more %u, SYNC 0x%x, "
- "sec. %u, infol %d, cpl %d spl %d.\n", name, info.version,
- info.ocsena, info.tarsup, info.trnxfr, info.morsup, info.sync,
- info.second, info.data_len, info.cp_len, info.sp_len);
-
- if (protocol_rev == 'B' || protocol_rev == 'C')
- printk("%s: isaena %u, forcaddr %u, max_id %u, max_chan %u, "
- "large_sg %u, res1 %u.\n", name, info.isaena,
- info.forcaddr, info.max_id, info.max_chan, info.large_sg,
- info.res1);
-
- if (protocol_rev == 'C')
- printk("%s: max_lun %u, m1 %u, idquest %u, pci %u, eisa %u, "
- "raidnum %u.\n", name, info.max_lun, info.m1,
- info.idquest, info.pci, info.eisa, info.raidnum);
-#endif
-
- if (ha->pdev) {
- pci_set_master(ha->pdev);
- if (pci_set_dma_mask(ha->pdev, DMA_BIT_MASK(32)))
- printk("%s: warning, pci_set_dma_mask failed.\n",
- ha->board_name);
- }
-
- return 1;
-
- freedma:
- if (subversion == ISA)
- free_dma(dma_channel);
- freeirq:
- free_irq(irq, &sha[j]);
- freelock:
- release_region(port_base, REGION_SIZE);
- fail:
- return 0;
-
- release:
- eata2x_release(shost);
- return 0;
-}
-
-static void internal_setup(char *str, int *ints)
-{
- int i, argc = ints[0];
- char *cur = str, *pc;
-
- if (argc > 0) {
- if (argc > MAX_INT_PARAM)
- argc = MAX_INT_PARAM;
-
- for (i = 0; i < argc; i++)
- io_port[i] = ints[i + 1];
-
- io_port[i] = 0;
- setup_done = 1;
- }
-
- while (cur && (pc = strchr(cur, ':'))) {
- int val = 0, c = *++pc;
-
- if (c == 'n' || c == 'N')
- val = 0;
- else if (c == 'y' || c == 'Y')
- val = 1;
- else
- val = (int)simple_strtoul(pc, NULL, 0);
-
- if (!strncmp(cur, "lc:", 3))
- linked_comm = val;
- else if (!strncmp(cur, "tm:", 3))
- tag_mode = val;
- else if (!strncmp(cur, "tc:", 3))
- tag_mode = val;
- else if (!strncmp(cur, "mq:", 3))
- max_queue_depth = val;
- else if (!strncmp(cur, "ls:", 3))
- link_statistics = val;
- else if (!strncmp(cur, "et:", 3))
- ext_tran = val;
- else if (!strncmp(cur, "rs:", 3))
- rev_scan = val;
- else if (!strncmp(cur, "ip:", 3))
- isa_probe = val;
- else if (!strncmp(cur, "ep:", 3))
- eisa_probe = val;
- else if (!strncmp(cur, "pp:", 3))
- pci_probe = val;
-
- if ((cur = strchr(cur, ',')))
- ++cur;
- }
-
- return;
-}
-
-static int option_setup(char *str)
-{
- int ints[MAX_INT_PARAM];
- char *cur = str;
- int i = 1;
-
- while (cur && isdigit(*cur) && i < MAX_INT_PARAM) {
- ints[i++] = simple_strtoul(cur, NULL, 0);
-
- if ((cur = strchr(cur, ',')) != NULL)
- cur++;
- }
-
- ints[0] = i - 1;
- internal_setup(cur, ints);
- return 1;
-}
-
-static void add_pci_ports(void)
-{
-#if defined(CONFIG_PCI)
- unsigned int addr, k;
- struct pci_dev *dev = NULL;
-
- for (k = 0; k < MAX_PCI; k++) {
-
- if (!(dev = pci_get_class(PCI_CLASS_STORAGE_SCSI << 8, dev)))
- break;
-
- if (pci_enable_device(dev)) {
-#if defined(DEBUG_PCI_DETECT)
- printk
- ("%s: detect, bus %d, devfn 0x%x, pci_enable_device failed.\n",
- driver_name, dev->bus->number, dev->devfn);
-#endif
-
- continue;
- }
-
- addr = pci_resource_start(dev, 0);
-
-#if defined(DEBUG_PCI_DETECT)
- printk("%s: detect, seq. %d, bus %d, devfn 0x%x, addr 0x%x.\n",
- driver_name, k, dev->bus->number, dev->devfn, addr);
-#endif
-
- /* Order addresses according to rev_scan value */
- io_port[MAX_INT_PARAM + (rev_scan ? (MAX_PCI - k) : (1 + k))] =
- addr + PCI_BASE_ADDRESS_0;
- }
-
- pci_dev_put(dev);
-#endif /* end CONFIG_PCI */
-}
-
-static int eata2x_detect(struct scsi_host_template *tpnt)
-{
- unsigned int j = 0, k;
-
- tpnt->proc_name = "eata2x";
-
- if (strlen(boot_options))
- option_setup(boot_options);
-
-#if defined(MODULE)
- /* io_port could have been modified when loading as a module */
- if (io_port[0] != SKIP) {
- setup_done = 1;
- io_port[MAX_INT_PARAM] = 0;
- }
-#endif
-
- for (k = MAX_INT_PARAM; io_port[k]; k++)
- if (io_port[k] == SKIP)
- continue;
- else if (io_port[k] <= MAX_ISA_ADDR) {
- if (!isa_probe)
- io_port[k] = SKIP;
- } else if (io_port[k] >= MIN_EISA_ADDR
- && io_port[k] <= MAX_EISA_ADDR) {
- if (!eisa_probe)
- io_port[k] = SKIP;
- }
-
- if (pci_probe) {
- if (!setup_done)
- add_pci_ports();
- else
- enable_pci_ports();
- }
-
- for (k = 0; io_port[k]; k++) {
-
- if (io_port[k] == SKIP)
- continue;
-
- if (j < MAX_BOARDS && port_detect(io_port[k], j, tpnt))
- j++;
- }
-
- num_boards = j;
- return j;
-}
-
-static void map_dma(unsigned int i, struct hostdata *ha)
-{
- unsigned int k, pci_dir;
- int count;
- struct scatterlist *sg;
- struct mscp *cpp;
- struct scsi_cmnd *SCpnt;
-
- cpp = &ha->cp[i];
- SCpnt = cpp->SCpnt;
- pci_dir = SCpnt->sc_data_direction;
-
- if (SCpnt->sense_buffer)
- cpp->sense_addr =
- H2DEV(pci_map_single(ha->pdev, SCpnt->sense_buffer,
- SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE));
-
- cpp->sense_len = SCSI_SENSE_BUFFERSIZE;
-
- if (!scsi_sg_count(SCpnt)) {
- cpp->data_len = 0;
- return;
- }
-
- count = pci_map_sg(ha->pdev, scsi_sglist(SCpnt), scsi_sg_count(SCpnt),
- pci_dir);
- BUG_ON(!count);
-
- scsi_for_each_sg(SCpnt, sg, count, k) {
- cpp->sglist[k].address = H2DEV(sg_dma_address(sg));
- cpp->sglist[k].num_bytes = H2DEV(sg_dma_len(sg));
- }
-
- cpp->sg = 1;
- cpp->data_address = H2DEV(pci_map_single(ha->pdev, cpp->sglist,
- scsi_sg_count(SCpnt) *
- sizeof(struct sg_list),
- pci_dir));
- cpp->data_len = H2DEV((scsi_sg_count(SCpnt) * sizeof(struct sg_list)));
-}
-
-static void unmap_dma(unsigned int i, struct hostdata *ha)
-{
- unsigned int pci_dir;
- struct mscp *cpp;
- struct scsi_cmnd *SCpnt;
-
- cpp = &ha->cp[i];
- SCpnt = cpp->SCpnt;
- pci_dir = SCpnt->sc_data_direction;
-
- if (DEV2H(cpp->sense_addr))
- pci_unmap_single(ha->pdev, DEV2H(cpp->sense_addr),
- DEV2H(cpp->sense_len), PCI_DMA_FROMDEVICE);
-
- if (scsi_sg_count(SCpnt))
- pci_unmap_sg(ha->pdev, scsi_sglist(SCpnt), scsi_sg_count(SCpnt),
- pci_dir);
-
- if (!DEV2H(cpp->data_len))
- pci_dir = PCI_DMA_BIDIRECTIONAL;
-
- if (DEV2H(cpp->data_address))
- pci_unmap_single(ha->pdev, DEV2H(cpp->data_address),
- DEV2H(cpp->data_len), pci_dir);
-}
-
-static void sync_dma(unsigned int i, struct hostdata *ha)
-{
- unsigned int pci_dir;
- struct mscp *cpp;
- struct scsi_cmnd *SCpnt;
-
- cpp = &ha->cp[i];
- SCpnt = cpp->SCpnt;
- pci_dir = SCpnt->sc_data_direction;
-
- if (DEV2H(cpp->sense_addr))
- pci_dma_sync_single_for_cpu(ha->pdev, DEV2H(cpp->sense_addr),
- DEV2H(cpp->sense_len),
- PCI_DMA_FROMDEVICE);
-
- if (scsi_sg_count(SCpnt))
- pci_dma_sync_sg_for_cpu(ha->pdev, scsi_sglist(SCpnt),
- scsi_sg_count(SCpnt), pci_dir);
-
- if (!DEV2H(cpp->data_len))
- pci_dir = PCI_DMA_BIDIRECTIONAL;
-
- if (DEV2H(cpp->data_address))
- pci_dma_sync_single_for_cpu(ha->pdev,
- DEV2H(cpp->data_address),
- DEV2H(cpp->data_len), pci_dir);
-}
-
-static void scsi_to_dev_dir(unsigned int i, struct hostdata *ha)
-{
- unsigned int k;
-
- static const unsigned char data_out_cmds[] = {
- 0x0a, 0x2a, 0x15, 0x55, 0x04, 0x07, 0x18, 0x1d, 0x24, 0x2e,
- 0x30, 0x31, 0x32, 0x38, 0x39, 0x3a, 0x3b, 0x3d, 0x3f, 0x40,
- 0x41, 0x4c, 0xaa, 0xae, 0xb0, 0xb1, 0xb2, 0xb6, 0xea, 0x1b, 0x5d
- };
-
- static const unsigned char data_none_cmds[] = {
- 0x01, 0x0b, 0x10, 0x11, 0x13, 0x16, 0x17, 0x19, 0x2b, 0x1e,
- 0x2c, 0xac, 0x2f, 0xaf, 0x33, 0xb3, 0x35, 0x36, 0x45, 0x47,
- 0x48, 0x49, 0xa9, 0x4b, 0xa5, 0xa6, 0xb5, 0x00
- };
-
- struct mscp *cpp;
- struct scsi_cmnd *SCpnt;
-
- cpp = &ha->cp[i];
- SCpnt = cpp->SCpnt;
-
- if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
- cpp->din = 1;
- cpp->dout = 0;
- return;
- } else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) {
- cpp->din = 0;
- cpp->dout = 1;
- return;
- } else if (SCpnt->sc_data_direction == DMA_NONE) {
- cpp->din = 0;
- cpp->dout = 0;
- return;
- }
-
- if (SCpnt->sc_data_direction != DMA_BIDIRECTIONAL)
- panic("%s: qcomm, invalid SCpnt->sc_data_direction.\n",
- ha->board_name);
-
- for (k = 0; k < ARRAY_SIZE(data_out_cmds); k++)
- if (SCpnt->cmnd[0] == data_out_cmds[k]) {
- cpp->dout = 1;
- break;
- }
-
- if ((cpp->din = !cpp->dout))
- for (k = 0; k < ARRAY_SIZE(data_none_cmds); k++)
- if (SCpnt->cmnd[0] == data_none_cmds[k]) {
- cpp->din = 0;
- break;
- }
-
-}
-
-static int eata2x_queuecommand_lck(struct scsi_cmnd *SCpnt,
- void (*done) (struct scsi_cmnd *))
-{
- struct Scsi_Host *shost = SCpnt->device->host;
- struct hostdata *ha = (struct hostdata *)shost->hostdata;
- unsigned int i, k;
- struct mscp *cpp;
-
- if (SCpnt->host_scribble)
- panic("%s: qcomm, SCpnt %p already active.\n",
- ha->board_name, SCpnt);
-
- /* i is the mailbox number, look for the first free mailbox
- starting from last_cp_used */
- i = ha->last_cp_used + 1;
-
- for (k = 0; k < shost->can_queue; k++, i++) {
- if (i >= shost->can_queue)
- i = 0;
- if (ha->cp_stat[i] == FREE) {
- ha->last_cp_used = i;
- break;
- }
- }
-
- if (k == shost->can_queue) {
- printk("%s: qcomm, no free mailbox.\n", ha->board_name);
- return 1;
- }
-
- /* Set pointer to control packet structure */
- cpp = &ha->cp[i];
-
- memset(cpp, 0, sizeof(struct mscp) - CP_TAIL_SIZE);
-
- /* Set pointer to status packet structure, Big Endian format */
- cpp->sp_dma_addr = H2DEV(ha->sp_dma_addr);
-
- SCpnt->scsi_done = done;
- cpp->cpp_index = i;
- SCpnt->host_scribble = (unsigned char *)&cpp->cpp_index;
-
- if (do_trace)
- scmd_printk(KERN_INFO, SCpnt,
- "qcomm, mbox %d.\n", i);
-
- cpp->reqsen = 1;
- cpp->dispri = 1;
-#if 0
- if (SCpnt->device->type == TYPE_TAPE)
- cpp->hbaci = 1;
-#endif
- cpp->one = 1;
- cpp->channel = SCpnt->device->channel;
- cpp->target = SCpnt->device->id;
- cpp->lun = SCpnt->device->lun;
- cpp->SCpnt = SCpnt;
- memcpy(cpp->cdb, SCpnt->cmnd, SCpnt->cmd_len);
-
- /* Use data transfer direction SCpnt->sc_data_direction */
- scsi_to_dev_dir(i, ha);
-
- /* Map DMA buffers and SG list */
- map_dma(i, ha);
-
- if (linked_comm && SCpnt->device->queue_depth > 2
- && TLDEV(SCpnt->device->type)) {
- ha->cp_stat[i] = READY;
- flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 0);
- return 0;
- }
-
- /* Send control packet to the board */
- if (do_dma(shost->io_port, cpp->cp_dma_addr, SEND_CP_DMA)) {
- unmap_dma(i, ha);
- SCpnt->host_scribble = NULL;
- scmd_printk(KERN_INFO, SCpnt, "qcomm, adapter busy.\n");
- return 1;
- }
-
- ha->cp_stat[i] = IN_USE;
- return 0;
-}
-
-static DEF_SCSI_QCMD(eata2x_queuecommand)
-
-static int eata2x_eh_abort(struct scsi_cmnd *SCarg)
-{
- struct Scsi_Host *shost = SCarg->device->host;
- struct hostdata *ha = (struct hostdata *)shost->hostdata;
- unsigned int i;
-
- if (SCarg->host_scribble == NULL) {
- scmd_printk(KERN_INFO, SCarg, "abort, cmd inactive.\n");
- return SUCCESS;
- }
-
- i = *(unsigned int *)SCarg->host_scribble;
- scmd_printk(KERN_WARNING, SCarg, "abort, mbox %d.\n", i);
-
- if (i >= shost->can_queue)
- panic("%s: abort, invalid SCarg->host_scribble.\n", ha->board_name);
-
- if (wait_on_busy(shost->io_port, MAXLOOP)) {
- printk("%s: abort, timeout error.\n", ha->board_name);
- return FAILED;
- }
-
- if (ha->cp_stat[i] == FREE) {
- printk("%s: abort, mbox %d is free.\n", ha->board_name, i);
- return SUCCESS;
- }
-
- if (ha->cp_stat[i] == IN_USE) {
- printk("%s: abort, mbox %d is in use.\n", ha->board_name, i);
-
- if (SCarg != ha->cp[i].SCpnt)
- panic("%s: abort, mbox %d, SCarg %p, cp SCpnt %p.\n",
- ha->board_name, i, SCarg, ha->cp[i].SCpnt);
-
- if (inb(shost->io_port + REG_AUX_STATUS) & IRQ_ASSERTED)
- printk("%s: abort, mbox %d, interrupt pending.\n",
- ha->board_name, i);
-
- return FAILED;
- }
-
- if (ha->cp_stat[i] == IN_RESET) {
- printk("%s: abort, mbox %d is in reset.\n", ha->board_name, i);
- return FAILED;
- }
-
- if (ha->cp_stat[i] == LOCKED) {
- printk("%s: abort, mbox %d is locked.\n", ha->board_name, i);
- return SUCCESS;
- }
-
- if (ha->cp_stat[i] == READY || ha->cp_stat[i] == ABORTING) {
- unmap_dma(i, ha);
- SCarg->result = DID_ABORT << 16;
- SCarg->host_scribble = NULL;
- ha->cp_stat[i] = FREE;
- printk("%s, abort, mbox %d ready, DID_ABORT, done.\n",
- ha->board_name, i);
- SCarg->scsi_done(SCarg);
- return SUCCESS;
- }
-
- panic("%s: abort, mbox %d, invalid cp_stat.\n", ha->board_name, i);
-}
-
-static int eata2x_eh_host_reset(struct scsi_cmnd *SCarg)
-{
- unsigned int i, time, k, c, limit = 0;
- struct scsi_cmnd *SCpnt;
- struct Scsi_Host *shost = SCarg->device->host;
- struct hostdata *ha = (struct hostdata *)shost->hostdata;
-
- scmd_printk(KERN_INFO, SCarg, "reset, enter.\n");
-
- spin_lock_irq(shost->host_lock);
-
- if (SCarg->host_scribble == NULL)
- printk("%s: reset, inactive.\n", ha->board_name);
-
- if (ha->in_reset) {
- printk("%s: reset, exit, already in reset.\n", ha->board_name);
- spin_unlock_irq(shost->host_lock);
- return FAILED;
- }
-
- if (wait_on_busy(shost->io_port, MAXLOOP)) {
- printk("%s: reset, exit, timeout error.\n", ha->board_name);
- spin_unlock_irq(shost->host_lock);
- return FAILED;
- }
-
- ha->retries = 0;
-
- for (c = 0; c <= shost->max_channel; c++)
- for (k = 0; k < shost->max_id; k++) {
- ha->target_redo[k][c] = 1;
- ha->target_to[k][c] = 0;
- }
-
- for (i = 0; i < shost->can_queue; i++) {
-
- if (ha->cp_stat[i] == FREE)
- continue;
-
- if (ha->cp_stat[i] == LOCKED) {
- ha->cp_stat[i] = FREE;
- printk("%s: reset, locked mbox %d forced free.\n",
- ha->board_name, i);
- continue;
- }
-
- if (!(SCpnt = ha->cp[i].SCpnt))
- panic("%s: reset, mbox %d, SCpnt == NULL.\n", ha->board_name, i);
-
- if (ha->cp_stat[i] == READY || ha->cp_stat[i] == ABORTING) {
- ha->cp_stat[i] = ABORTING;
- printk("%s: reset, mbox %d aborting.\n",
- ha->board_name, i);
- }
-
- else {
- ha->cp_stat[i] = IN_RESET;
- printk("%s: reset, mbox %d in reset.\n",
- ha->board_name, i);
- }
-
- if (SCpnt->host_scribble == NULL)
- panic("%s: reset, mbox %d, garbled SCpnt.\n", ha->board_name, i);
-
- if (*(unsigned int *)SCpnt->host_scribble != i)
- panic("%s: reset, mbox %d, index mismatch.\n", ha->board_name, i);
-
- if (SCpnt->scsi_done == NULL)
- panic("%s: reset, mbox %d, SCpnt->scsi_done == NULL.\n",
- ha->board_name, i);
- }
-
- if (do_dma(shost->io_port, 0, RESET_PIO)) {
- printk("%s: reset, cannot reset, timeout error.\n", ha->board_name);
- spin_unlock_irq(shost->host_lock);
- return FAILED;
- }
-
- printk("%s: reset, board reset done, enabling interrupts.\n", ha->board_name);
-
-#if defined(DEBUG_RESET)
- do_trace = 1;
-#endif
-
- ha->in_reset = 1;
-
- spin_unlock_irq(shost->host_lock);
-
- /* FIXME: use a sleep instead */
- time = jiffies;
- while ((jiffies - time) < (10 * HZ) && limit++ < 200000)
- udelay(100L);
-
- spin_lock_irq(shost->host_lock);
-
- printk("%s: reset, interrupts disabled, loops %d.\n", ha->board_name, limit);
-
- for (i = 0; i < shost->can_queue; i++) {
-
- if (ha->cp_stat[i] == IN_RESET) {
- SCpnt = ha->cp[i].SCpnt;
- unmap_dma(i, ha);
- SCpnt->result = DID_RESET << 16;
- SCpnt->host_scribble = NULL;
-
- /* This mailbox is still waiting for its interrupt */
- ha->cp_stat[i] = LOCKED;
-
- printk
- ("%s, reset, mbox %d locked, DID_RESET, done.\n",
- ha->board_name, i);
- }
-
- else if (ha->cp_stat[i] == ABORTING) {
- SCpnt = ha->cp[i].SCpnt;
- unmap_dma(i, ha);
- SCpnt->result = DID_RESET << 16;
- SCpnt->host_scribble = NULL;
-
- /* This mailbox was never queued to the adapter */
- ha->cp_stat[i] = FREE;
-
- printk
- ("%s, reset, mbox %d aborting, DID_RESET, done.\n",
- ha->board_name, i);
- }
-
- else
- /* Any other mailbox has already been set free by interrupt */
- continue;
-
- SCpnt->scsi_done(SCpnt);
- }
-
- ha->in_reset = 0;
- do_trace = 0;
-
- printk("%s: reset, exit.\n", ha->board_name);
-
- spin_unlock_irq(shost->host_lock);
- return SUCCESS;
-}
-
-int eata2x_bios_param(struct scsi_device *sdev, struct block_device *bdev,
- sector_t capacity, int *dkinfo)
-{
- unsigned int size = capacity;
-
- if (ext_tran || (scsicam_bios_param(bdev, capacity, dkinfo) < 0)) {
- dkinfo[0] = 255;
- dkinfo[1] = 63;
- dkinfo[2] = size / (dkinfo[0] * dkinfo[1]);
- }
-#if defined (DEBUG_GEOMETRY)
- printk("%s: bios_param, head=%d, sec=%d, cyl=%d.\n", driver_name,
- dkinfo[0], dkinfo[1], dkinfo[2]);
-#endif
-
- return 0;
-}
-
-static void sort(unsigned long sk[], unsigned int da[], unsigned int n,
- unsigned int rev)
-{
- unsigned int i, j, k, y;
- unsigned long x;
-
- for (i = 0; i < n - 1; i++) {
- k = i;
-
- for (j = k + 1; j < n; j++)
- if (rev) {
- if (sk[j] > sk[k])
- k = j;
- } else {
- if (sk[j] < sk[k])
- k = j;
- }
-
- if (k != i) {
- x = sk[k];
- sk[k] = sk[i];
- sk[i] = x;
- y = da[k];
- da[k] = da[i];
- da[i] = y;
- }
- }
-
- return;
-}
-
-static int reorder(struct hostdata *ha, unsigned long cursec,
- unsigned int ihdlr, unsigned int il[], unsigned int n_ready)
-{
- struct scsi_cmnd *SCpnt;
- struct mscp *cpp;
- unsigned int k, n;
- unsigned int rev = 0, s = 1, r = 1;
- unsigned int input_only = 1, overlap = 0;
- unsigned long sl[n_ready], pl[n_ready], ll[n_ready];
- unsigned long maxsec = 0, minsec = ULONG_MAX, seek = 0, iseek = 0;
- unsigned long ioseek = 0;
-
- static unsigned int flushcount = 0, batchcount = 0, sortcount = 0;
- static unsigned int readycount = 0, ovlcount = 0, inputcount = 0;
- static unsigned int readysorted = 0, revcount = 0;
- static unsigned long seeksorted = 0, seeknosort = 0;
-
- if (link_statistics && !(++flushcount % link_statistics))
- printk("fc %d bc %d ic %d oc %d rc %d rs %d sc %d re %d"
- " av %ldK as %ldK.\n", flushcount, batchcount,
- inputcount, ovlcount, readycount, readysorted, sortcount,
- revcount, seeknosort / (readycount + 1),
- seeksorted / (readycount + 1));
-
- if (n_ready <= 1)
- return 0;
-
- for (n = 0; n < n_ready; n++) {
- k = il[n];
- cpp = &ha->cp[k];
- SCpnt = cpp->SCpnt;
-
- if (!cpp->din)
- input_only = 0;
-
- if (blk_rq_pos(SCpnt->request) < minsec)
- minsec = blk_rq_pos(SCpnt->request);
- if (blk_rq_pos(SCpnt->request) > maxsec)
- maxsec = blk_rq_pos(SCpnt->request);
-
- sl[n] = blk_rq_pos(SCpnt->request);
- ioseek += blk_rq_sectors(SCpnt->request);
-
- if (!n)
- continue;
-
- if (sl[n] < sl[n - 1])
- s = 0;
- if (sl[n] > sl[n - 1])
- r = 0;
-
- if (link_statistics) {
- if (sl[n] > sl[n - 1])
- seek += sl[n] - sl[n - 1];
- else
- seek += sl[n - 1] - sl[n];
- }
-
- }
-
- if (link_statistics) {
- if (cursec > sl[0])
- seek += cursec - sl[0];
- else
- seek += sl[0] - cursec;
- }
-
- if (cursec > ((maxsec + minsec) / 2))
- rev = 1;
-
- if (ioseek > ((maxsec - minsec) / 2))
- rev = 0;
-
- if (!((rev && r) || (!rev && s)))
- sort(sl, il, n_ready, rev);
-
- if (!input_only)
- for (n = 0; n < n_ready; n++) {
- k = il[n];
- cpp = &ha->cp[k];
- SCpnt = cpp->SCpnt;
- ll[n] = blk_rq_sectors(SCpnt->request);
- pl[n] = SCpnt->serial_number;
-
- if (!n)
- continue;
-
- if ((sl[n] == sl[n - 1])
- || (!rev && ((sl[n - 1] + ll[n - 1]) > sl[n]))
- || (rev && ((sl[n] + ll[n]) > sl[n - 1])))
- overlap = 1;
- }
-
- if (overlap)
- sort(pl, il, n_ready, 0);
-
- if (link_statistics) {
- if (cursec > sl[0])
- iseek = cursec - sl[0];
- else
- iseek = sl[0] - cursec;
- batchcount++;
- readycount += n_ready;
- seeknosort += seek / 1024;
- if (input_only)
- inputcount++;
- if (overlap) {
- ovlcount++;
- seeksorted += iseek / 1024;
- } else
- seeksorted += (iseek + maxsec - minsec) / 1024;
- if (rev && !r) {
- revcount++;
- readysorted += n_ready;
- }
- if (!rev && !s) {
- sortcount++;
- readysorted += n_ready;
- }
- }
-#if defined(DEBUG_LINKED_COMMANDS)
- if (link_statistics && (overlap || !(flushcount % link_statistics)))
- for (n = 0; n < n_ready; n++) {
- k = il[n];
- cpp = &ha->cp[k];
- SCpnt = cpp->SCpnt;
- scmd_printk(KERN_INFO, SCpnt,
- "%s mb %d fc %d nr %d sec %ld ns %u"
- " cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
- (ihdlr ? "ihdlr" : "qcomm"),
- k, flushcount,
- n_ready, blk_rq_pos(SCpnt->request),
- blk_rq_sectors(SCpnt->request), cursec, YESNO(s),
- YESNO(r), YESNO(rev), YESNO(input_only),
- YESNO(overlap), cpp->din);
- }
-#endif
- return overlap;
-}
-
-static void flush_dev(struct scsi_device *dev, unsigned long cursec,
- struct hostdata *ha, unsigned int ihdlr)
-{
- struct scsi_cmnd *SCpnt;
- struct mscp *cpp;
- unsigned int k, n, n_ready = 0, il[MAX_MAILBOXES];
-
- for (k = 0; k < dev->host->can_queue; k++) {
-
- if (ha->cp_stat[k] != READY && ha->cp_stat[k] != IN_USE)
- continue;
-
- cpp = &ha->cp[k];
- SCpnt = cpp->SCpnt;
-
- if (SCpnt->device != dev)
- continue;
-
- if (ha->cp_stat[k] == IN_USE)
- return;
-
- il[n_ready++] = k;
- }
-
- if (reorder(ha, cursec, ihdlr, il, n_ready))
- n_ready = 1;
-
- for (n = 0; n < n_ready; n++) {
- k = il[n];
- cpp = &ha->cp[k];
- SCpnt = cpp->SCpnt;
-
- if (do_dma(dev->host->io_port, cpp->cp_dma_addr, SEND_CP_DMA)) {
- scmd_printk(KERN_INFO, SCpnt,
- "%s, mbox %d, adapter"
- " busy, will abort.\n",
- (ihdlr ? "ihdlr" : "qcomm"),
- k);
- ha->cp_stat[k] = ABORTING;
- continue;
- }
-
- ha->cp_stat[k] = IN_USE;
- }
-}
-
-static irqreturn_t ihdlr(struct Scsi_Host *shost)
-{
- struct scsi_cmnd *SCpnt;
- unsigned int i, k, c, status, tstatus, reg;
- struct mssp *spp;
- struct mscp *cpp;
- struct hostdata *ha = (struct hostdata *)shost->hostdata;
- int irq = shost->irq;
-
- /* Check if this board need to be serviced */
- if (!(inb(shost->io_port + REG_AUX_STATUS) & IRQ_ASSERTED))
- goto none;
-
- ha->iocount++;
-
- if (do_trace)
- printk("%s: ihdlr, enter, irq %d, count %d.\n", ha->board_name, irq,
- ha->iocount);
-
- /* Check if this board is still busy */
- if (wait_on_busy(shost->io_port, 20 * MAXLOOP)) {
- reg = inb(shost->io_port + REG_STATUS);
- printk
- ("%s: ihdlr, busy timeout error, irq %d, reg 0x%x, count %d.\n",
- ha->board_name, irq, reg, ha->iocount);
- goto none;
- }
-
- spp = &ha->sp;
-
- /* Make a local copy just before clearing the interrupt indication */
- memcpy(spp, ha->sp_cpu_addr, sizeof(struct mssp));
-
- /* Clear the completion flag and cp pointer on the dynamic copy of sp */
- memset(ha->sp_cpu_addr, 0, sizeof(struct mssp));
-
- /* Read the status register to clear the interrupt indication */
- reg = inb(shost->io_port + REG_STATUS);
-
-#if defined (DEBUG_INTERRUPT)
- {
- unsigned char *bytesp;
- int cnt;
- bytesp = (unsigned char *)spp;
- if (ha->iocount < 200) {
- printk("sp[] =");
- for (cnt = 0; cnt < 15; cnt++)
- printk(" 0x%x", bytesp[cnt]);
- printk("\n");
- }
- }
-#endif
-
- /* Reject any sp with supspect data */
- if (spp->eoc == 0 && ha->iocount > 1)
- printk
- ("%s: ihdlr, spp->eoc == 0, irq %d, reg 0x%x, count %d.\n",
- ha->board_name, irq, reg, ha->iocount);
- if (spp->cpp_index < 0 || spp->cpp_index >= shost->can_queue)
- printk
- ("%s: ihdlr, bad spp->cpp_index %d, irq %d, reg 0x%x, count %d.\n",
- ha->board_name, spp->cpp_index, irq, reg, ha->iocount);
- if (spp->eoc == 0 || spp->cpp_index < 0
- || spp->cpp_index >= shost->can_queue)
- goto handled;
-
- /* Find the mailbox to be serviced on this board */
- i = spp->cpp_index;
-
- cpp = &(ha->cp[i]);
-
-#if defined(DEBUG_GENERATE_ABORTS)
- if ((ha->iocount > 500) && ((ha->iocount % 500) < 3))
- goto handled;
-#endif
-
- if (ha->cp_stat[i] == IGNORE) {
- ha->cp_stat[i] = FREE;
- goto handled;
- } else if (ha->cp_stat[i] == LOCKED) {
- ha->cp_stat[i] = FREE;
- printk("%s: ihdlr, mbox %d unlocked, count %d.\n", ha->board_name, i,
- ha->iocount);
- goto handled;
- } else if (ha->cp_stat[i] == FREE) {
- printk("%s: ihdlr, mbox %d is free, count %d.\n", ha->board_name, i,
- ha->iocount);
- goto handled;
- } else if (ha->cp_stat[i] == IN_RESET)
- printk("%s: ihdlr, mbox %d is in reset.\n", ha->board_name, i);
- else if (ha->cp_stat[i] != IN_USE)
- panic("%s: ihdlr, mbox %d, invalid cp_stat: %d.\n",
- ha->board_name, i, ha->cp_stat[i]);
-
- ha->cp_stat[i] = FREE;
- SCpnt = cpp->SCpnt;
-
- if (SCpnt == NULL)
- panic("%s: ihdlr, mbox %d, SCpnt == NULL.\n", ha->board_name, i);
-
- if (SCpnt->host_scribble == NULL)
- panic("%s: ihdlr, mbox %d, SCpnt %p garbled.\n", ha->board_name,
- i, SCpnt);
-
- if (*(unsigned int *)SCpnt->host_scribble != i)
- panic("%s: ihdlr, mbox %d, index mismatch %d.\n",
- ha->board_name, i,
- *(unsigned int *)SCpnt->host_scribble);
-
- sync_dma(i, ha);
-
- if (linked_comm && SCpnt->device->queue_depth > 2
- && TLDEV(SCpnt->device->type))
- flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 1);
-
- tstatus = status_byte(spp->target_status);
-
-#if defined(DEBUG_GENERATE_ERRORS)
- if ((ha->iocount > 500) && ((ha->iocount % 200) < 2))
- spp->adapter_status = 0x01;
-#endif
-
- switch (spp->adapter_status) {
- case ASOK: /* status OK */
-
- /* Forces a reset if a disk drive keeps returning BUSY */
- if (tstatus == BUSY && SCpnt->device->type != TYPE_TAPE)
- status = DID_ERROR << 16;
-
- /* If there was a bus reset, redo operation on each target */
- else if (tstatus != GOOD && SCpnt->device->type == TYPE_DISK
- && ha->target_redo[SCpnt->device->id][SCpnt->
- device->
- channel])
- status = DID_BUS_BUSY << 16;
-
- /* Works around a flaw in scsi.c */
- else if (tstatus == CHECK_CONDITION
- && SCpnt->device->type == TYPE_DISK
- && (SCpnt->sense_buffer[2] & 0xf) == RECOVERED_ERROR)
- status = DID_BUS_BUSY << 16;
-
- else
- status = DID_OK << 16;
-
- if (tstatus == GOOD)
- ha->target_redo[SCpnt->device->id][SCpnt->device->
- channel] = 0;
-
- if (spp->target_status && SCpnt->device->type == TYPE_DISK &&
- (!(tstatus == CHECK_CONDITION && ha->iocount <= 1000 &&
- (SCpnt->sense_buffer[2] & 0xf) == NOT_READY)))
- printk("%s: ihdlr, target %d.%d:%d, "
- "target_status 0x%x, sense key 0x%x.\n",
- ha->board_name,
- SCpnt->device->channel, SCpnt->device->id,
- (u8)SCpnt->device->lun,
- spp->target_status, SCpnt->sense_buffer[2]);
-
- ha->target_to[SCpnt->device->id][SCpnt->device->channel] = 0;
-
- if (ha->last_retried_pid == SCpnt->serial_number)
- ha->retries = 0;
-
- break;
- case ASST: /* Selection Time Out */
- case 0x02: /* Command Time Out */
-
- if (ha->target_to[SCpnt->device->id][SCpnt->device->channel] > 1)
- status = DID_ERROR << 16;
- else {
- status = DID_TIME_OUT << 16;
- ha->target_to[SCpnt->device->id][SCpnt->device->
- channel]++;
- }
-
- break;
-
- /* Perform a limited number of internal retries */
- case 0x03: /* SCSI Bus Reset Received */
- case 0x04: /* Initial Controller Power-up */
-
- for (c = 0; c <= shost->max_channel; c++)
- for (k = 0; k < shost->max_id; k++)
- ha->target_redo[k][c] = 1;
-
- if (SCpnt->device->type != TYPE_TAPE
- && ha->retries < MAX_INTERNAL_RETRIES) {
-
-#if defined(DID_SOFT_ERROR)
- status = DID_SOFT_ERROR << 16;
-#else
- status = DID_BUS_BUSY << 16;
-#endif
-
- ha->retries++;
- ha->last_retried_pid = SCpnt->serial_number;
- } else
- status = DID_ERROR << 16;
-
- break;
- case 0x05: /* Unexpected Bus Phase */
- case 0x06: /* Unexpected Bus Free */
- case 0x07: /* Bus Parity Error */
- case 0x08: /* SCSI Hung */
- case 0x09: /* Unexpected Message Reject */
- case 0x0a: /* SCSI Bus Reset Stuck */
- case 0x0b: /* Auto Request-Sense Failed */
- case 0x0c: /* Controller Ram Parity Error */
- default:
- status = DID_ERROR << 16;
- break;
- }
-
- SCpnt->result = status | spp->target_status;
-
-#if defined(DEBUG_INTERRUPT)
- if (SCpnt->result || do_trace)
-#else
- if ((spp->adapter_status != ASOK && ha->iocount > 1000) ||
- (spp->adapter_status != ASOK &&
- spp->adapter_status != ASST && ha->iocount <= 1000) ||
- do_trace || msg_byte(spp->target_status))
-#endif
- scmd_printk(KERN_INFO, SCpnt, "ihdlr, mbox %2d, err 0x%x:%x,"
- " reg 0x%x, count %d.\n",
- i, spp->adapter_status, spp->target_status,
- reg, ha->iocount);
-
- unmap_dma(i, ha);
-
- /* Set the command state to inactive */
- SCpnt->host_scribble = NULL;
-
- SCpnt->scsi_done(SCpnt);
-
- if (do_trace)
- printk("%s: ihdlr, exit, irq %d, count %d.\n", ha->board_name,
- irq, ha->iocount);
-
- handled:
- return IRQ_HANDLED;
- none:
- return IRQ_NONE;
-}
-
-static irqreturn_t do_interrupt_handler(int dummy, void *shap)
-{
- struct Scsi_Host *shost;
- unsigned int j;
- unsigned long spin_flags;
- irqreturn_t ret;
-
- /* Check if the interrupt must be processed by this handler */
- if ((j = (unsigned int)((char *)shap - sha)) >= num_boards)
- return IRQ_NONE;
- shost = sh[j];
-
- spin_lock_irqsave(shost->host_lock, spin_flags);
- ret = ihdlr(shost);
- spin_unlock_irqrestore(shost->host_lock, spin_flags);
- return ret;
-}
-
-static int eata2x_release(struct Scsi_Host *shost)
-{
- struct hostdata *ha = (struct hostdata *)shost->hostdata;
- unsigned int i;
-
- for (i = 0; i < shost->can_queue; i++)
- kfree((&ha->cp[i])->sglist);
-
- for (i = 0; i < shost->can_queue; i++)
- pci_unmap_single(ha->pdev, ha->cp[i].cp_dma_addr,
- sizeof(struct mscp), PCI_DMA_BIDIRECTIONAL);
-
- if (ha->sp_cpu_addr)
- pci_free_consistent(ha->pdev, sizeof(struct mssp),
- ha->sp_cpu_addr, ha->sp_dma_addr);
-
- free_irq(shost->irq, &sha[ha->board_number]);
-
- if (shost->dma_channel != NO_DMA)
- free_dma(shost->dma_channel);
-
- release_region(shost->io_port, shost->n_io_port);
- scsi_unregister(shost);
- return 0;
-}
-
-#include "scsi_module.c"
-
-#ifndef MODULE
-__setup("eata=", option_setup);
-#endif /* end MODULE */
diff --git a/drivers/scsi/eata_generic.h b/drivers/scsi/eata_generic.h
deleted file mode 100644
index 1a396c5e7f73..000000000000
--- a/drivers/scsi/eata_generic.h
+++ /dev/null
@@ -1,401 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/********************************************************
-* Header file for eata_dma.c and eata_pio.c *
-* Linux EATA SCSI drivers *
-* (c) 1993-96 Michael Neuffer *
-* mike@i-Connect.Net *
-* neuffer@mail.uni-mainz.de *
-*********************************************************
-* last change: 96/08/14 *
-********************************************************/
-
-
-#ifndef _EATA_GENERIC_H
-#define _EATA_GENERIC_H
-
-
-
-/*********************************************
- * Misc. definitions *
- *********************************************/
-
-#define R_LIMIT 0x20000
-
-#define MAXISA 4
-#define MAXEISA 16
-#define MAXPCI 16
-#define MAXIRQ 16
-#define MAXTARGET 16
-#define MAXCHANNEL 3
-
-#define IS_ISA 'I'
-#define IS_EISA 'E'
-#define IS_PCI 'P'
-
-#define BROKEN_INQUIRY 1
-
-#define BUSMASTER 0xff
-#define PIO 0xfe
-
-#define EATA_SIGNATURE 0x45415441 /* BIG ENDIAN coded "EATA" sig. */
-
-#define DPT_ID1 0x12
-#define DPT_ID2 0x14
-
-#define ATT_ID1 0x06
-#define ATT_ID2 0x94
-#define ATT_ID3 0x0
-
-#define NEC_ID1 0x38
-#define NEC_ID2 0xa3
-#define NEC_ID3 0x82
-
-
-#define EATA_CP_SIZE 44
-
-#define MAX_PCI_DEVICES 32 /* Maximum # Of Devices Per Bus */
-#define MAX_METHOD_2 16 /* Max Devices For Method 2 */
-#define MAX_PCI_BUS 16 /* Maximum # Of Busses Allowed */
-
-#define SG_SIZE 64
-#define SG_SIZE_BIG 252 /* max. 8096 elements, 64k */
-
-#define UPPER_DEVICE_QUEUE_LIMIT 64 /* The limit we have to set for the
- * device queue to keep the broken
- * midlevel SCSI code from producing
- * bogus timeouts
- */
-
-#define TYPE_DISK_QUEUE 16
-#define TYPE_TAPE_QUEUE 4
-#define TYPE_ROM_QUEUE 4
-#define TYPE_OTHER_QUEUE 2
-
-#define FREE 0
-#define OK 0
-#define NO_TIMEOUT 0
-#define USED 1
-#define TIMEOUT 2
-#define RESET 4
-#define LOCKED 8
-#define ABORTED 16
-
-#define READ 0
-#define WRITE 1
-#define OTHER 2
-
-#define HD(cmd) ((hostdata *)&(cmd->device->host->hostdata))
-#define CD(cmd) ((struct eata_ccb *)(cmd->host_scribble))
-#define SD(host) ((hostdata *)&(host->hostdata))
-
-/***********************************************
- * EATA Command & Register definitions *
- ***********************************************/
-#define PCI_REG_DPTconfig 0x40
-#define PCI_REG_PumpModeAddress 0x44
-#define PCI_REG_PumpModeData 0x48
-#define PCI_REG_ConfigParam1 0x50
-#define PCI_REG_ConfigParam2 0x54
-
-
-#define EATA_CMD_PIO_SETUPTEST 0xc6
-#define EATA_CMD_PIO_READ_CONFIG 0xf0
-#define EATA_CMD_PIO_SET_CONFIG 0xf1
-#define EATA_CMD_PIO_SEND_CP 0xf2
-#define EATA_CMD_PIO_RECEIVE_SP 0xf3
-#define EATA_CMD_PIO_TRUNC 0xf4
-
-#define EATA_CMD_RESET 0xf9
-#define EATA_CMD_IMMEDIATE 0xfa
-
-#define EATA_CMD_DMA_READ_CONFIG 0xfd
-#define EATA_CMD_DMA_SET_CONFIG 0xfe
-#define EATA_CMD_DMA_SEND_CP 0xff
-
-#define ECS_EMULATE_SENSE 0xd4
-
-#define EATA_GENERIC_ABORT 0x00
-#define EATA_SPECIFIC_RESET 0x01
-#define EATA_BUS_RESET 0x02
-#define EATA_SPECIFIC_ABORT 0x03
-#define EATA_QUIET_INTR 0x04
-#define EATA_COLD_BOOT_HBA 0x06 /* Only as a last resort */
-#define EATA_FORCE_IO 0x07
-
-#define HA_CTRLREG 0x206 /* control register for HBA */
-#define HA_CTRL_DISINT 0x02 /* CTRLREG: disable interrupts */
-#define HA_CTRL_RESCPU 0x04 /* CTRLREG: reset processor */
-#define HA_CTRL_8HEADS 0x08 /* CTRLREG: set for drives with*
- * >=8 heads (WD1003 rudimentary :-) */
-
-#define HA_WCOMMAND 0x07 /* command register offset */
-#define HA_WIFC 0x06 /* immediate command offset */
-#define HA_WCODE 0x05
-#define HA_WCODE2 0x04
-#define HA_WDMAADDR 0x02 /* DMA address LSB offset */
-#define HA_RAUXSTAT 0x08 /* aux status register offset*/
-#define HA_RSTATUS 0x07 /* status register offset */
-#define HA_RDATA 0x00 /* data register (16bit) */
-#define HA_WDATA 0x00 /* data register (16bit) */
-
-#define HA_ABUSY 0x01 /* aux busy bit */
-#define HA_AIRQ 0x02 /* aux IRQ pending bit */
-#define HA_SERROR 0x01 /* pr. command ended in error*/
-#define HA_SMORE 0x02 /* more data soon to come */
-#define HA_SCORR 0x04 /* data corrected */
-#define HA_SDRQ 0x08 /* data request active */
-#define HA_SSC 0x10 /* seek complete */
-#define HA_SFAULT 0x20 /* write fault */
-#define HA_SREADY 0x40 /* drive ready */
-#define HA_SBUSY 0x80 /* drive busy */
-#define HA_SDRDY HA_SSC+HA_SREADY+HA_SDRQ
-
-/**********************************************
- * Message definitions *
- **********************************************/
-
-#define HA_NO_ERROR 0x00 /* No Error */
-#define HA_ERR_SEL_TO 0x01 /* Selection Timeout */
-#define HA_ERR_CMD_TO 0x02 /* Command Timeout */
-#define HA_BUS_RESET 0x03 /* SCSI Bus Reset Received */
-#define HA_INIT_POWERUP 0x04 /* Initial Controller Power-up */
-#define HA_UNX_BUSPHASE 0x05 /* Unexpected Bus Phase */
-#define HA_UNX_BUS_FREE 0x06 /* Unexpected Bus Free */
-#define HA_BUS_PARITY 0x07 /* Bus Parity Error */
-#define HA_SCSI_HUNG 0x08 /* SCSI Hung */
-#define HA_UNX_MSGRJCT 0x09 /* Unexpected Message Rejected */
-#define HA_RESET_STUCK 0x0a /* SCSI Bus Reset Stuck */
-#define HA_RSENSE_FAIL 0x0b /* Auto Request-Sense Failed */
-#define HA_PARITY_ERR 0x0c /* Controller Ram Parity Error */
-#define HA_CP_ABORT_NA 0x0d /* Abort Message sent to non-active cmd */
-#define HA_CP_ABORTED 0x0e /* Abort Message sent to active cmd */
-#define HA_CP_RESET_NA 0x0f /* Reset Message sent to non-active cmd */
-#define HA_CP_RESET 0x10 /* Reset Message sent to active cmd */
-#define HA_ECC_ERR 0x11 /* Controller Ram ECC Error */
-#define HA_PCI_PARITY 0x12 /* PCI Parity Error */
-#define HA_PCI_MABORT 0x13 /* PCI Master Abort */
-#define HA_PCI_TABORT 0x14 /* PCI Target Abort */
-#define HA_PCI_STABORT 0x15 /* PCI Signaled Target Abort */
-
-/**********************************************
- * Other definitions *
- **********************************************/
-
-struct reg_bit { /* reading this one will clear the interrupt */
- __u8 error:1; /* previous command ended in an error */
- __u8 more:1; /* more DATA coming soon, poll BSY & DRQ (PIO) */
- __u8 corr:1; /* data read was successfully corrected with ECC*/
- __u8 drq:1; /* data request active */
- __u8 sc:1; /* seek complete */
- __u8 fault:1; /* write fault */
- __u8 ready:1; /* drive ready */
- __u8 busy:1; /* controller busy */
-};
-
-struct reg_abit { /* reading this won't clear the interrupt */
- __u8 abusy:1; /* auxiliary busy */
- __u8 irq:1; /* set when drive interrupt is asserted */
- __u8 dummy:6;
-};
-
-struct eata_register { /* EATA register set */
- __u8 data_reg[2]; /* R, couldn't figure this one out */
- __u8 cp_addr[4]; /* W, CP address register */
- union {
- __u8 command; /* W, command code: [read|set] conf, send CP*/
- struct reg_bit status; /* R, see register_bit1 */
- __u8 statusbyte;
- } ovr;
- struct reg_abit aux_stat; /* R, see register_bit2 */
-};
-
-struct get_conf { /* Read Configuration Array */
- __u32 len; /* Should return 0x22, 0x24, etc */
- __u32 signature; /* Signature MUST be "EATA" */
- __u8 version2:4,
- version:4; /* EATA Version level */
- __u8 OCS_enabled:1, /* Overlap Command Support enabled */
- TAR_support:1, /* SCSI Target Mode supported */
- TRNXFR:1, /* Truncate Transfer Cmd not necessary *
- * Only used in PIO Mode */
- MORE_support:1, /* MORE supported (only PIO Mode) */
- DMA_support:1, /* DMA supported Driver uses only *
- * this mode */
- DMA_valid:1, /* DRQ value in Byte 30 is valid */
- ATA:1, /* ATA device connected (not supported) */
- HAA_valid:1; /* Hostadapter Address is valid */
-
- __u16 cppadlen; /* Number of pad bytes send after CD data *
- * set to zero for DMA commands */
- __u8 scsi_id[4]; /* SCSI ID of controller 2-0 Byte 0 res. *
- * if not, zero is returned */
- __u32 cplen; /* CP length: number of valid cp bytes */
- __u32 splen; /* Number of bytes returned after *
- * Receive SP command */
- __u16 queuesiz; /* max number of queueable CPs */
- __u16 dummy;
- __u16 SGsiz; /* max number of SG table entries */
- __u8 IRQ:4, /* IRQ used this HA */
- IRQ_TR:1, /* IRQ Trigger: 0=edge, 1=level */
- SECOND:1, /* This is a secondary controller */
- DMA_channel:2; /* DRQ index, DRQ is 2comp of DRQX */
- __u8 sync; /* device at ID 7 tru 0 is running in *
- * synchronous mode, this will disappear */
- __u8 DSBLE:1, /* ISA i/o addressing is disabled */
- FORCADR:1, /* i/o address has been forced */
- SG_64K:1,
- SG_UAE:1,
- :4;
- __u8 MAX_ID:5, /* Max number of SCSI target IDs */
- MAX_CHAN:3; /* Number of SCSI busses on HBA */
- __u8 MAX_LUN; /* Max number of LUNs */
- __u8 :3,
- AUTOTRM:1,
- M1_inst:1,
- ID_qest:1, /* Raidnum ID is questionable */
- is_PCI:1, /* HBA is PCI */
- is_EISA:1; /* HBA is EISA */
- __u8 RAIDNUM; /* unique HBA identifier */
- __u8 unused[474];
-};
-
-struct eata_sg_list
-{
- __u32 data;
- __u32 len;
-};
-
-struct eata_ccb { /* Send Command Packet structure */
-
- __u8 SCSI_Reset:1, /* Cause a SCSI Bus reset on the cmd */
- HBA_Init:1, /* Cause Controller to reinitialize */
- Auto_Req_Sen:1, /* Do Auto Request Sense on errors */
- scatter:1, /* Data Ptr points to a SG Packet */
- Resrvd:1, /* RFU */
- Interpret:1, /* Interpret the SCSI cdb of own use */
- DataOut:1, /* Data Out phase with command */
- DataIn:1; /* Data In phase with command */
- __u8 reqlen; /* Request Sense Length *
- * Valid if Auto_Req_Sen=1 */
- __u8 unused[3];
- __u8 FWNEST:1, /* send cmd to phys RAID component */
- unused2:7;
- __u8 Phsunit:1, /* physical unit on mirrored pair */
- I_AT:1, /* inhibit address translation */
- I_HBA_C:1, /* HBA inhibit caching */
- unused3:5;
-
- __u8 cp_id:5, /* SCSI Device ID of target */
- cp_channel:3; /* SCSI Channel # of HBA */
- __u8 cp_lun:3,
- :2,
- cp_luntar:1, /* CP is for target ROUTINE */
- cp_dispri:1, /* Grant disconnect privilege */
- cp_identify:1; /* Always TRUE */
- __u8 cp_msg1; /* Message bytes 0-3 */
- __u8 cp_msg2;
- __u8 cp_msg3;
- __u8 cp_cdb[12]; /* Command Descriptor Block */
- __u32 cp_datalen; /* Data Transfer Length *
- * If scatter=1 len of sg package */
- void *cp_viraddr; /* address of this ccb */
- __u32 cp_dataDMA; /* Data Address, if scatter=1 *
- * address of scatter packet */
- __u32 cp_statDMA; /* address for Status Packet */
- __u32 cp_reqDMA; /* Request Sense Address, used if *
- * CP command ends with error */
- /* Additional CP info begins here */
- __u32 timestamp; /* Needed to measure command latency */
- __u32 timeout;
- __u8 sizeindex;
- __u8 rw_latency;
- __u8 retries;
- __u8 status; /* status of this queueslot */
- struct scsi_cmnd *cmd; /* address of cmd */
- struct eata_sg_list *sg_list;
-};
-
-
-struct eata_sp {
- __u8 hba_stat:7, /* HBA status */
- EOC:1; /* True if command finished */
- __u8 scsi_stat; /* Target SCSI status */
- __u8 reserved[2];
- __u32 residue_len; /* Number of bytes not transferred */
- struct eata_ccb *ccb; /* Address set in COMMAND PACKET */
- __u8 msg[12];
-};
-
-typedef struct hstd {
- __u8 vendor[9];
- __u8 name[18];
- __u8 revision[6];
- __u8 EATA_revision;
- __u32 firmware_revision;
- __u8 HBA_number;
- __u8 bustype; /* bustype of HBA */
- __u8 channel; /* # of avail. scsi channels */
- __u8 state; /* state of HBA */
- __u8 primary; /* true if primary */
- __u8 more_support:1, /* HBA supports MORE flag */
- immediate_support:1, /* HBA supports IMMEDIATE CMDs*/
- broken_INQUIRY:1; /* This is an EISA HBA with *
- * broken INQUIRY */
- __u8 do_latency; /* Latency measurement flag */
- __u32 reads[13];
- __u32 writes[13];
- __u32 reads_lat[12][4];
- __u32 writes_lat[12][4];
- __u32 all_lat[4];
- __u8 resetlevel[MAXCHANNEL];
- __u32 last_ccb; /* Last used ccb */
- __u32 cplen; /* size of CP in words */
- __u16 cppadlen; /* pad length of cp in words */
- __u16 queuesize;
- __u16 sgsize; /* # of entries in the SG list*/
- __u16 devflags; /* bits set for detected devices */
- __u8 hostid; /* SCSI ID of HBA */
- __u8 moresupport; /* HBA supports MORE flag */
- struct Scsi_Host *next;
- struct Scsi_Host *prev;
- struct pci_dev *pdev; /* PCI device or NULL for non PCI */
- struct eata_sp sp; /* status packet */
- struct eata_ccb ccb[0]; /* ccb array begins here */
-}hostdata;
-
-/* structure for max. 2 emulated drives */
-struct drive_geom_emul {
- __u8 trans; /* translation flag 1=transl */
- __u8 channel; /* SCSI channel number */
- __u8 HBA; /* HBA number (prim/sec) */
- __u8 id; /* drive id */
- __u8 lun; /* drive lun */
- __u32 heads; /* number of heads */
- __u32 sectors; /* number of sectors */
- __u32 cylinder; /* number of cylinders */
-};
-
-struct geom_emul {
- __u8 bios_drives; /* number of emulated drives */
- struct drive_geom_emul drv[2]; /* drive structures */
-};
-
-#endif /* _EATA_GENERIC_H */
-
-/*
- * Overrides for Emacs so that we almost follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * tab-width: 8
- * End:
- */
diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c
deleted file mode 100644
index 4299fa485622..000000000000
--- a/drivers/scsi/eata_pio.c
+++ /dev/null
@@ -1,966 +0,0 @@
-/************************************************************
- * *
- * Linux EATA SCSI PIO driver *
- * *
- * based on the CAM document CAM/89-004 rev. 2.0c, *
- * DPT's driver kit, some internal documents and source, *
- * and several other Linux scsi drivers and kernel docs. *
- * *
- * The driver currently: *
- * -supports all EATA-PIO boards *
- * -only supports DASD devices *
- * *
- * (c)1993-96 Michael Neuffer, Alfred Arnold *
- * neuffer@goofy.zdv.uni-mainz.de *
- * a.arnold@kfa-juelich.de *
- * *
- * Updated 2002 by Alan Cox <alan@lxorguk.ukuu.org.uk> for *
- * Linux 2.5.x and the newer locking and error handling *
- * *
- * This program is free software; you can redistribute it *
- * and/or modify it under the terms of the GNU General *
- * Public License as published by the Free Software *
- * Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be *
- * useful, but WITHOUT ANY WARRANTY; without even the *
- * implied warranty of MERCHANTABILITY or FITNESS FOR A *
- * PARTICULAR PURPOSE. See the GNU General Public License *
- * for more details. *
- * *
- * You should have received a copy of the GNU General *
- * Public License along with this kernel; if not, write to *
- * the Free Software Foundation, Inc., 675 Mass Ave, *
- * Cambridge, MA 02139, USA. *
- * *
- * For the avoidance of doubt the "preferred form" of this *
- * code is one which is in an open non patent encumbered *
- * format. Where cryptographic key signing forms part of *
- * the process of creating an executable the information *
- * including keys needed to generate an equivalently *
- * functional executable are deemed to be part of the *
- * source code are deemed to be part of the source code. *
- * *
- ************************************************************
- * last change: 2002/11/02 OS: Linux 2.5.45 *
- ************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-
-#include "eata_generic.h"
-#include "eata_pio.h"
-
-
-static unsigned int ISAbases[MAXISA] = {
- 0x1F0, 0x170, 0x330, 0x230
-};
-
-static unsigned int ISAirqs[MAXISA] = {
- 14, 12, 15, 11
-};
-
-static unsigned char EISAbases[] = {
- 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1
-};
-
-static unsigned int registered_HBAs;
-static struct Scsi_Host *last_HBA;
-static struct Scsi_Host *first_HBA;
-static unsigned char reg_IRQ[16];
-static unsigned char reg_IRQL[16];
-static unsigned long int_counter;
-static unsigned long queue_counter;
-
-static struct scsi_host_template driver_template;
-
-static int eata_pio_show_info(struct seq_file *m, struct Scsi_Host *shost)
-{
- seq_printf(m, "EATA (Extended Attachment) PIO driver version: "
- "%d.%d%s\n",VER_MAJOR, VER_MINOR, VER_SUB);
- seq_printf(m, "queued commands: %10ld\n"
- "processed interrupts:%10ld\n", queue_counter, int_counter);
- seq_printf(m, "\nscsi%-2d: HBA %.10s\n",
- shost->host_no, SD(shost)->name);
- seq_printf(m, "Firmware revision: v%s\n",
- SD(shost)->revision);
- seq_puts(m, "IO: PIO\n");
- seq_printf(m, "Base IO : %#.4x\n", (u32) shost->base);
- seq_printf(m, "Host Bus: %s\n",
- (SD(shost)->bustype == 'P')?"PCI ":
- (SD(shost)->bustype == 'E')?"EISA":"ISA ");
- return 0;
-}
-
-static int eata_pio_release(struct Scsi_Host *sh)
-{
- hostdata *hd = SD(sh);
- if (sh->irq && reg_IRQ[sh->irq] == 1)
- free_irq(sh->irq, NULL);
- else
- reg_IRQ[sh->irq]--;
- if (SD(sh)->channel == 0) {
- if (sh->io_port && sh->n_io_port)
- release_region(sh->io_port, sh->n_io_port);
- }
- /* At this point the PCI reference can go */
- if (hd->pdev)
- pci_dev_put(hd->pdev);
- return 1;
-}
-
-static void IncStat(struct scsi_pointer *SCp, unsigned int Increment)
-{
- SCp->ptr += Increment;
- if ((SCp->this_residual -= Increment) == 0) {
- if ((--SCp->buffers_residual) == 0)
- SCp->Status = 0;
- else {
- SCp->buffer++;
- SCp->ptr = sg_virt(SCp->buffer);
- SCp->this_residual = SCp->buffer->length;
- }
- }
-}
-
-static irqreturn_t eata_pio_int_handler(int irq, void *dev_id);
-
-static irqreturn_t do_eata_pio_int_handler(int irq, void *dev_id)
-{
- unsigned long flags;
- struct Scsi_Host *dev = dev_id;
- irqreturn_t ret;
-
- spin_lock_irqsave(dev->host_lock, flags);
- ret = eata_pio_int_handler(irq, dev_id);
- spin_unlock_irqrestore(dev->host_lock, flags);
- return ret;
-}
-
-static irqreturn_t eata_pio_int_handler(int irq, void *dev_id)
-{
- unsigned int eata_stat = 0xfffff;
- struct scsi_cmnd *cmd;
- hostdata *hd;
- struct eata_ccb *cp;
- unsigned long base;
- unsigned int x, z;
- struct Scsi_Host *sh;
- unsigned short zwickel = 0;
- unsigned char stat, odd;
- irqreturn_t ret = IRQ_NONE;
-
- for (x = 1, sh = first_HBA; x <= registered_HBAs; x++, sh = SD(sh)->prev)
- {
- if (sh->irq != irq)
- continue;
- if (inb(sh->base + HA_RSTATUS) & HA_SBUSY)
- continue;
-
- int_counter++;
- ret = IRQ_HANDLED;
-
- hd = SD(sh);
-
- cp = &hd->ccb[0];
- cmd = cp->cmd;
- base = cmd->device->host->base;
-
- do {
- stat = inb(base + HA_RSTATUS);
- if (stat & HA_SDRQ) {
- if (cp->DataIn) {
- z = 256;
- odd = 0;
- while ((cmd->SCp.Status) && ((z > 0) || (odd))) {
- if (odd) {
- *(cmd->SCp.ptr) = zwickel >> 8;
- IncStat(&cmd->SCp, 1);
- odd = 0;
- }
- x = min_t(unsigned int, z, cmd->SCp.this_residual / 2);
- insw(base + HA_RDATA, cmd->SCp.ptr, x);
- z -= x;
- IncStat(&cmd->SCp, 2 * x);
- if ((z > 0) && (cmd->SCp.this_residual == 1)) {
- zwickel = inw(base + HA_RDATA);
- *(cmd->SCp.ptr) = zwickel & 0xff;
- IncStat(&cmd->SCp, 1);
- z--;
- odd = 1;
- }
- }
- while (z > 0) {
- zwickel = inw(base + HA_RDATA);
- z--;
- }
- } else { /* cp->DataOut */
-
- odd = 0;
- z = 256;
- while ((cmd->SCp.Status) && ((z > 0) || (odd))) {
- if (odd) {
- zwickel += *(cmd->SCp.ptr) << 8;
- IncStat(&cmd->SCp, 1);
- outw(zwickel, base + HA_RDATA);
- z--;
- odd = 0;
- }
- x = min_t(unsigned int, z, cmd->SCp.this_residual / 2);
- outsw(base + HA_RDATA, cmd->SCp.ptr, x);
- z -= x;
- IncStat(&cmd->SCp, 2 * x);
- if ((z > 0) && (cmd->SCp.this_residual == 1)) {
- zwickel = *(cmd->SCp.ptr);
- zwickel &= 0xff;
- IncStat(&cmd->SCp, 1);
- odd = 1;
- }
- }
- while (z > 0 || odd) {
- outw(zwickel, base + HA_RDATA);
- z--;
- odd = 0;
- }
- }
- }
- }
- while ((stat & HA_SDRQ) || ((stat & HA_SMORE) && hd->moresupport));
-
- /* terminate handler if HBA goes busy again, i.e. transfers
- * more data */
-
- if (stat & HA_SBUSY)
- break;
-
- /* OK, this is quite stupid, but I haven't found any correct
- * way to get HBA&SCSI status so far */
-
- if (!(inb(base + HA_RSTATUS) & HA_SERROR)) {
- cmd->result = (DID_OK << 16);
- hd->devflags |= (1 << cp->cp_id);
- } else if (hd->devflags & (1 << cp->cp_id))
- cmd->result = (DID_OK << 16) + 0x02;
- else
- cmd->result = (DID_NO_CONNECT << 16);
-
- if (cp->status == LOCKED) {
- cp->status = FREE;
- eata_stat = inb(base + HA_RSTATUS);
- printk(KERN_CRIT "eata_pio: int_handler, freeing locked " "queueslot\n");
- return ret;
- }
-#if DBG_INTR2
- if (stat != 0x50)
- printk(KERN_DEBUG "stat: %#.2x, result: %#.8x\n", stat, cmd->result);
-#endif
-
- cp->status = FREE; /* now we can release the slot */
-
- cmd->scsi_done(cmd);
- }
-
- return ret;
-}
-
-static inline unsigned int eata_pio_send_command(unsigned long base, unsigned char command)
-{
- unsigned int loop = 50;
-
- while (inb(base + HA_RSTATUS) & HA_SBUSY)
- if (--loop == 0)
- return 1;
-
- /* Enable interrupts for HBA. It is not the best way to do it at this
- * place, but I hope that it doesn't interfere with the IDE driver
- * initialization this way */
-
- outb(HA_CTRL_8HEADS, base + HA_CTRLREG);
-
- outb(command, base + HA_WCOMMAND);
- return 0;
-}
-
-static int eata_pio_queue_lck(struct scsi_cmnd *cmd,
- void (*done)(struct scsi_cmnd *))
-{
- unsigned int x, y;
- unsigned long base;
-
- hostdata *hd;
- struct Scsi_Host *sh;
- struct eata_ccb *cp;
-
- queue_counter++;
-
- hd = HD(cmd);
- sh = cmd->device->host;
- base = sh->base;
-
- /* use only slot 0, as 2001 can handle only one cmd at a time */
-
- y = x = 0;
-
- if (hd->ccb[y].status != FREE) {
-
- DBG(DBG_QUEUE, printk(KERN_EMERG "can_queue %d, x %d, y %d\n", sh->can_queue, x, y));
-#if DEBUG_EATA
- panic(KERN_EMERG "eata_pio: run out of queue slots cmdno:%ld " "intrno: %ld\n", queue_counter, int_counter);
-#else
- panic(KERN_EMERG "eata_pio: run out of queue slots....\n");
-#endif
- }
-
- cp = &hd->ccb[y];
-
- memset(cp, 0, sizeof(struct eata_ccb));
-
- cp->status = USED; /* claim free slot */
-
- DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
- "eata_pio_queue 0x%p, y %d\n", cmd, y));
-
- cmd->scsi_done = (void *) done;
-
- if (cmd->sc_data_direction == DMA_TO_DEVICE)
- cp->DataOut = 1; /* Output mode */
- else
- cp->DataIn = 0; /* Input mode */
-
- cp->Interpret = (cmd->device->id == hd->hostid);
- cp->cp_datalen = cpu_to_be32(scsi_bufflen(cmd));
- cp->Auto_Req_Sen = 0;
- cp->cp_reqDMA = 0;
- cp->reqlen = 0;
-
- cp->cp_id = cmd->device->id;
- cp->cp_lun = cmd->device->lun;
- cp->cp_dispri = 0;
- cp->cp_identify = 1;
- memcpy(cp->cp_cdb, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
-
- cp->cp_statDMA = 0;
-
- cp->cp_viraddr = cp;
- cp->cmd = cmd;
- cmd->host_scribble = (char *) &hd->ccb[y];
-
- if (!scsi_bufflen(cmd)) {
- cmd->SCp.buffers_residual = 1;
- cmd->SCp.ptr = NULL;
- cmd->SCp.this_residual = 0;
- cmd->SCp.buffer = NULL;
- } else {
- cmd->SCp.buffer = scsi_sglist(cmd);
- cmd->SCp.buffers_residual = scsi_sg_count(cmd);
- cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
- cmd->SCp.this_residual = cmd->SCp.buffer->length;
- }
- cmd->SCp.Status = (cmd->SCp.this_residual != 0); /* TRUE as long as bytes
- * are to transfer */
-
- if (eata_pio_send_command(base, EATA_CMD_PIO_SEND_CP)) {
- cmd->result = DID_BUS_BUSY << 16;
- scmd_printk(KERN_NOTICE, cmd,
- "eata_pio_queue pid 0x%p, HBA busy, "
- "returning DID_BUS_BUSY, done.\n", cmd);
- done(cmd);
- cp->status = FREE;
- return 0;
- }
- /* FIXME: timeout */
- while (!(inb(base + HA_RSTATUS) & HA_SDRQ))
- cpu_relax();
- outsw(base + HA_RDATA, cp, hd->cplen);
- outb(EATA_CMD_PIO_TRUNC, base + HA_WCOMMAND);
- for (x = 0; x < hd->cppadlen; x++)
- outw(0, base + HA_RDATA);
-
- DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
- "Queued base %#.4lx cmd: 0x%p "
- "slot %d irq %d\n", sh->base, cmd, y, sh->irq));
-
- return 0;
-}
-
-static DEF_SCSI_QCMD(eata_pio_queue)
-
-static int eata_pio_abort(struct scsi_cmnd *cmd)
-{
- unsigned int loop = 100;
-
- DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
- "eata_pio_abort called pid: 0x%p\n", cmd));
-
- while (inb(cmd->device->host->base + HA_RAUXSTAT) & HA_ABUSY)
- if (--loop == 0) {
- printk(KERN_WARNING "eata_pio: abort, timeout error.\n");
- return FAILED;
- }
- if (CD(cmd)->status == FREE) {
- DBG(DBG_ABNORM, printk(KERN_WARNING "Returning: SCSI_ABORT_NOT_RUNNING\n"));
- return FAILED;
- }
- if (CD(cmd)->status == USED) {
- DBG(DBG_ABNORM, printk(KERN_WARNING "Returning: SCSI_ABORT_BUSY\n"));
- /* We want to sleep a bit more here */
- return FAILED; /* SNOOZE */
- }
- if (CD(cmd)->status == RESET) {
- printk(KERN_WARNING "eata_pio: abort, command reset error.\n");
- return FAILED;
- }
- if (CD(cmd)->status == LOCKED) {
- DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio: abort, queue slot " "locked.\n"));
- return FAILED;
- }
- panic("eata_pio: abort: invalid slot status\n");
-}
-
-static int eata_pio_host_reset(struct scsi_cmnd *cmd)
-{
- unsigned int x, limit = 0;
- unsigned char success = 0;
- struct scsi_cmnd *sp;
- struct Scsi_Host *host = cmd->device->host;
-
- DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
- "eata_pio_reset called\n"));
-
- spin_lock_irq(host->host_lock);
-
- if (HD(cmd)->state == RESET) {
- printk(KERN_WARNING "eata_pio_reset: exit, already in reset.\n");
- spin_unlock_irq(host->host_lock);
- return FAILED;
- }
-
- /* force all slots to be free */
-
- for (x = 0; x < cmd->device->host->can_queue; x++) {
-
- if (HD(cmd)->ccb[x].status == FREE)
- continue;
-
- sp = HD(cmd)->ccb[x].cmd;
- HD(cmd)->ccb[x].status = RESET;
- printk(KERN_WARNING "eata_pio_reset: slot %d in reset.\n", x);
-
- if (sp == NULL)
- panic("eata_pio_reset: slot %d, sp==NULL.\n", x);
- }
-
- /* hard reset the HBA */
- outb(EATA_CMD_RESET, cmd->device->host->base + HA_WCOMMAND);
-
- DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: board reset done.\n"));
- HD(cmd)->state = RESET;
-
- spin_unlock_irq(host->host_lock);
- msleep(3000);
- spin_lock_irq(host->host_lock);
-
- DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: interrupts disabled, " "loops %d.\n", limit));
-
- for (x = 0; x < cmd->device->host->can_queue; x++) {
-
- /* Skip slots already set free by interrupt */
- if (HD(cmd)->ccb[x].status != RESET)
- continue;
-
- sp = HD(cmd)->ccb[x].cmd;
- sp->result = DID_RESET << 16;
-
- /* This mailbox is terminated */
- printk(KERN_WARNING "eata_pio_reset: reset ccb %d.\n", x);
- HD(cmd)->ccb[x].status = FREE;
-
- sp->scsi_done(sp);
- }
-
- HD(cmd)->state = 0;
-
- spin_unlock_irq(host->host_lock);
-
- if (success) { /* hmmm... */
- DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: exit, success.\n"));
- return SUCCESS;
- } else {
- DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: exit, wakeup.\n"));
- return FAILED;
- }
-}
-
-static char *get_pio_board_data(unsigned long base, unsigned int irq, unsigned int id, unsigned long cplen, unsigned short cppadlen)
-{
- struct eata_ccb cp;
- static char buff[256];
- int z;
-
- memset(&cp, 0, sizeof(struct eata_ccb));
- memset(buff, 0, sizeof(buff));
-
- cp.DataIn = 1;
- cp.Interpret = 1; /* Interpret command */
-
- cp.cp_datalen = cpu_to_be32(254);
- cp.cp_dataDMA = cpu_to_be32(0);
-
- cp.cp_id = id;
- cp.cp_lun = 0;
-
- cp.cp_cdb[0] = INQUIRY;
- cp.cp_cdb[1] = 0;
- cp.cp_cdb[2] = 0;
- cp.cp_cdb[3] = 0;
- cp.cp_cdb[4] = 254;
- cp.cp_cdb[5] = 0;
-
- if (eata_pio_send_command(base, EATA_CMD_PIO_SEND_CP))
- return NULL;
-
- while (!(inb(base + HA_RSTATUS) & HA_SDRQ))
- cpu_relax();
-
- outsw(base + HA_RDATA, &cp, cplen);
- outb(EATA_CMD_PIO_TRUNC, base + HA_WCOMMAND);
- for (z = 0; z < cppadlen; z++)
- outw(0, base + HA_RDATA);
-
- while (inb(base + HA_RSTATUS) & HA_SBUSY)
- cpu_relax();
-
- if (inb(base + HA_RSTATUS) & HA_SERROR)
- return NULL;
- else if (!(inb(base + HA_RSTATUS) & HA_SDRQ))
- return NULL;
- else {
- insw(base + HA_RDATA, &buff, 127);
- while (inb(base + HA_RSTATUS) & HA_SDRQ)
- inw(base + HA_RDATA);
- return buff;
- }
-}
-
-static int get_pio_conf_PIO(unsigned long base, struct get_conf *buf)
-{
- unsigned long loop = HZ / 2;
- int z;
- unsigned short *p;
-
- if (!request_region(base, 9, "eata_pio"))
- return 0;
-
- memset(buf, 0, sizeof(struct get_conf));
-
- while (inb(base + HA_RSTATUS) & HA_SBUSY)
- if (--loop == 0)
- goto fail;
-
- DBG(DBG_PIO && DBG_PROBE, printk(KERN_DEBUG "Issuing PIO READ CONFIG to HBA at %#lx\n", base));
- eata_pio_send_command(base, EATA_CMD_PIO_READ_CONFIG);
-
- loop = 50;
- for (p = (unsigned short *) buf; (long) p <= ((long) buf + (sizeof(struct get_conf) / 2)); p++) {
- while (!(inb(base + HA_RSTATUS) & HA_SDRQ))
- if (--loop == 0)
- goto fail;
-
- loop = 50;
- *p = inw(base + HA_RDATA);
- }
- if (inb(base + HA_RSTATUS) & HA_SERROR) {
- DBG(DBG_PROBE, printk("eata_dma: get_conf_PIO, error during "
- "transfer for HBA at %lx\n", base));
- goto fail;
- }
-
- if (cpu_to_be32(EATA_SIGNATURE) != buf->signature)
- goto fail;
-
- DBG(DBG_PIO && DBG_PROBE, printk(KERN_NOTICE "EATA Controller found "
- "at %#4lx EATA Level: %x\n",
- base, (unsigned int) (buf->version)));
-
- while (inb(base + HA_RSTATUS) & HA_SDRQ)
- inw(base + HA_RDATA);
-
- if (!ALLOW_DMA_BOARDS) {
- for (z = 0; z < MAXISA; z++)
- if (base == ISAbases[z]) {
- buf->IRQ = ISAirqs[z];
- break;
- }
- }
-
- return 1;
-
- fail:
- release_region(base, 9);
- return 0;
-}
-
-static void print_pio_config(struct get_conf *gc)
-{
- printk("Please check values: (read config data)\n");
- printk("LEN: %d ver:%d OCS:%d TAR:%d TRNXFR:%d MORES:%d\n", be32_to_cpu(gc->len), gc->version, gc->OCS_enabled, gc->TAR_support, gc->TRNXFR, gc->MORE_support);
- printk("HAAV:%d SCSIID0:%d ID1:%d ID2:%d QUEUE:%d SG:%d SEC:%d\n", gc->HAA_valid, gc->scsi_id[3], gc->scsi_id[2], gc->scsi_id[1], be16_to_cpu(gc->queuesiz), be16_to_cpu(gc->SGsiz), gc->SECOND);
- printk("IRQ:%d IRQT:%d FORCADR:%d MCH:%d RIDQ:%d\n", gc->IRQ, gc->IRQ_TR, gc->FORCADR, gc->MAX_CHAN, gc->ID_qest);
-}
-
-static unsigned int print_selftest(unsigned int base)
-{
- unsigned char buffer[512];
-#ifdef VERBOSE_SETUP
- int z;
-#endif
-
- printk("eata_pio: executing controller self test & setup...\n");
- while (inb(base + HA_RSTATUS) & HA_SBUSY);
- outb(EATA_CMD_PIO_SETUPTEST, base + HA_WCOMMAND);
- do {
- while (inb(base + HA_RSTATUS) & HA_SBUSY)
- /* nothing */ ;
- if (inb(base + HA_RSTATUS) & HA_SDRQ) {
- insw(base + HA_RDATA, &buffer, 256);
-#ifdef VERBOSE_SETUP
- /* no beeps please... */
- for (z = 0; z < 511 && buffer[z]; z++)
- if (buffer[z] != 7)
- printk("%c", buffer[z]);
-#endif
- }
- } while (inb(base + HA_RSTATUS) & (HA_SBUSY | HA_SDRQ));
-
- return (!(inb(base + HA_RSTATUS) & HA_SERROR));
-}
-
-static int register_pio_HBA(long base, struct get_conf *gc, struct pci_dev *pdev)
-{
- unsigned long size = 0;
- char *buff;
- unsigned long cplen;
- unsigned short cppadlen;
- struct Scsi_Host *sh;
- hostdata *hd;
-
- DBG(DBG_REGISTER, print_pio_config(gc));
-
- if (gc->DMA_support) {
- printk("HBA at %#.4lx supports DMA. Please use EATA-DMA driver.\n", base);
- if (!ALLOW_DMA_BOARDS)
- return 0;
- }
-
- if ((buff = get_pio_board_data(base, gc->IRQ, gc->scsi_id[3], cplen = (cpu_to_be32(gc->cplen) + 1) / 2, cppadlen = (cpu_to_be16(gc->cppadlen) + 1) / 2)) == NULL) {
- printk("HBA at %#lx didn't react on INQUIRY. Sorry.\n", base);
- return 0;
- }
-
- if (!print_selftest(base) && !ALLOW_DMA_BOARDS) {
- printk("HBA at %#lx failed while performing self test & setup.\n", base);
- return 0;
- }
-
- size = sizeof(hostdata) + (sizeof(struct eata_ccb) * be16_to_cpu(gc->queuesiz));
-
- sh = scsi_register(&driver_template, size);
- if (sh == NULL)
- return 0;
-
- if (!reg_IRQ[gc->IRQ]) { /* Interrupt already registered ? */
- if (!request_irq(gc->IRQ, do_eata_pio_int_handler, 0, "EATA-PIO", sh)) {
- reg_IRQ[gc->IRQ]++;
- if (!gc->IRQ_TR)
- reg_IRQL[gc->IRQ] = 1; /* IRQ is edge triggered */
- } else {
- printk("Couldn't allocate IRQ %d, Sorry.\n", gc->IRQ);
- return 0;
- }
- } else { /* More than one HBA on this IRQ */
- if (reg_IRQL[gc->IRQ]) {
- printk("Can't support more than one HBA on this IRQ,\n" " if the IRQ is edge triggered. Sorry.\n");
- return 0;
- } else
- reg_IRQ[gc->IRQ]++;
- }
-
- hd = SD(sh);
-
- memset(hd->ccb, 0, (sizeof(struct eata_ccb) * be16_to_cpu(gc->queuesiz)));
- memset(hd->reads, 0, sizeof(hd->reads));
-
- strlcpy(SD(sh)->vendor, &buff[8], sizeof(SD(sh)->vendor));
- strlcpy(SD(sh)->name, &buff[16], sizeof(SD(sh)->name));
- SD(sh)->revision[0] = buff[32];
- SD(sh)->revision[1] = buff[33];
- SD(sh)->revision[2] = buff[34];
- SD(sh)->revision[3] = '.';
- SD(sh)->revision[4] = buff[35];
- SD(sh)->revision[5] = 0;
-
- switch (be32_to_cpu(gc->len)) {
- case 0x1c:
- SD(sh)->EATA_revision = 'a';
- break;
- case 0x1e:
- SD(sh)->EATA_revision = 'b';
- break;
- case 0x22:
- SD(sh)->EATA_revision = 'c';
- break;
- case 0x24:
- SD(sh)->EATA_revision = 'z';
- break;
- default:
- SD(sh)->EATA_revision = '?';
- }
-
- if (be32_to_cpu(gc->len) >= 0x22) {
- if (gc->is_PCI)
- hd->bustype = IS_PCI;
- else if (gc->is_EISA)
- hd->bustype = IS_EISA;
- else
- hd->bustype = IS_ISA;
- } else {
- if (buff[21] == '4')
- hd->bustype = IS_PCI;
- else if (buff[21] == '2')
- hd->bustype = IS_EISA;
- else
- hd->bustype = IS_ISA;
- }
-
- SD(sh)->cplen = cplen;
- SD(sh)->cppadlen = cppadlen;
- SD(sh)->hostid = gc->scsi_id[3];
- SD(sh)->devflags = 1 << gc->scsi_id[3];
- SD(sh)->moresupport = gc->MORE_support;
- sh->unique_id = base;
- sh->base = base;
- sh->io_port = base;
- sh->n_io_port = 9;
- sh->irq = gc->IRQ;
- sh->dma_channel = PIO;
- sh->this_id = gc->scsi_id[3];
- sh->can_queue = 1;
- sh->cmd_per_lun = 1;
- sh->sg_tablesize = SG_ALL;
-
- hd->channel = 0;
-
- hd->pdev = pci_dev_get(pdev); /* Keep a PCI reference */
-
- sh->max_id = 8;
- sh->max_lun = 8;
-
- if (gc->SECOND)
- hd->primary = 0;
- else
- hd->primary = 1;
-
- hd->next = NULL; /* build a linked list of all HBAs */
- hd->prev = last_HBA;
- if (hd->prev != NULL)
- SD(hd->prev)->next = sh;
- last_HBA = sh;
- if (first_HBA == NULL)
- first_HBA = sh;
- registered_HBAs++;
- return (1);
-}
-
-static void find_pio_ISA(struct get_conf *buf)
-{
- int i;
-
- for (i = 0; i < MAXISA; i++) {
- if (!ISAbases[i])
- continue;
- if (!get_pio_conf_PIO(ISAbases[i], buf))
- continue;
- if (!register_pio_HBA(ISAbases[i], buf, NULL))
- release_region(ISAbases[i], 9);
- else
- ISAbases[i] = 0;
- }
- return;
-}
-
-static void find_pio_EISA(struct get_conf *buf)
-{
- u32 base;
- int i;
-
-#ifdef CHECKPAL
- u8 pal1, pal2, pal3;
-#endif
-
- for (i = 0; i < MAXEISA; i++) {
- if (EISAbases[i]) { /* Still a possibility ? */
-
- base = 0x1c88 + (i * 0x1000);
-#ifdef CHECKPAL
- pal1 = inb((u16) base - 8);
- pal2 = inb((u16) base - 7);
- pal3 = inb((u16) base - 6);
-
- if (((pal1 == 0x12) && (pal2 == 0x14)) || ((pal1 == 0x38) && (pal2 == 0xa3) && (pal3 == 0x82)) || ((pal1 == 0x06) && (pal2 == 0x94) && (pal3 == 0x24))) {
- DBG(DBG_PROBE, printk(KERN_NOTICE "EISA EATA id tags found: " "%x %x %x \n", (int) pal1, (int) pal2, (int) pal3));
-#endif
- if (get_pio_conf_PIO(base, buf)) {
- DBG(DBG_PROBE && DBG_EISA, print_pio_config(buf));
- if (buf->IRQ) {
- if (!register_pio_HBA(base, buf, NULL))
- release_region(base, 9);
- } else {
- printk(KERN_NOTICE "eata_dma: No valid IRQ. HBA " "removed from list\n");
- release_region(base, 9);
- }
- }
- /* Nothing found here so we take it from the list */
- EISAbases[i] = 0;
-#ifdef CHECKPAL
- }
-#endif
- }
- }
- return;
-}
-
-static void find_pio_PCI(struct get_conf *buf)
-{
-#ifndef CONFIG_PCI
- printk("eata_dma: kernel PCI support not enabled. Skipping scan for PCI HBAs.\n");
-#else
- struct pci_dev *dev = NULL;
- unsigned long base, x;
-
- while ((dev = pci_get_device(PCI_VENDOR_ID_DPT, PCI_DEVICE_ID_DPT, dev)) != NULL) {
- DBG(DBG_PROBE && DBG_PCI, printk("eata_pio: find_PCI, HBA at %s\n", pci_name(dev)));
- if (pci_enable_device(dev))
- continue;
- pci_set_master(dev);
- base = pci_resource_flags(dev, 0);
- if (base & IORESOURCE_MEM) {
- printk("eata_pio: invalid base address of device %s\n", pci_name(dev));
- continue;
- }
- base = pci_resource_start(dev, 0);
- /* EISA tag there ? */
- if ((inb(base) == 0x12) && (inb(base + 1) == 0x14))
- continue; /* Jep, it's forced, so move on */
- base += 0x10; /* Now, THIS is the real address */
- if (base != 0x1f8) {
- /* We didn't find it in the primary search */
- if (get_pio_conf_PIO(base, buf)) {
- if (buf->FORCADR) { /* If the address is forced */
- release_region(base, 9);
- continue; /* we'll find it later */
- }
-
- /* OK. We made it till here, so we can go now
- * and register it. We only have to check and
- * eventually remove it from the EISA and ISA list
- */
-
- if (!register_pio_HBA(base, buf, dev)) {
- release_region(base, 9);
- continue;
- }
-
- if (base < 0x1000) {
- for (x = 0; x < MAXISA; ++x) {
- if (ISAbases[x] == base) {
- ISAbases[x] = 0;
- break;
- }
- }
- } else if ((base & 0x0fff) == 0x0c88) {
- x = (base >> 12) & 0x0f;
- EISAbases[x] = 0;
- }
- }
-#ifdef CHECK_BLINK
- else if (check_blink_state(base)) {
- printk("eata_pio: HBA is in BLINK state.\n" "Consult your HBAs manual to correct this.\n");
- }
-#endif
- }
- }
-#endif /* #ifndef CONFIG_PCI */
-}
-
-static int eata_pio_detect(struct scsi_host_template *tpnt)
-{
- struct Scsi_Host *HBA_ptr;
- struct get_conf gc;
- int i;
-
- find_pio_PCI(&gc);
- find_pio_EISA(&gc);
- find_pio_ISA(&gc);
-
- for (i = 0; i < MAXIRQ; i++)
- if (reg_IRQ[i])
- request_irq(i, do_eata_pio_int_handler, 0, "EATA-PIO", NULL);
-
- HBA_ptr = first_HBA;
-
- if (registered_HBAs != 0) {
- printk("EATA (Extended Attachment) PIO driver version: %d.%d%s\n"
- "(c) 1993-95 Michael Neuffer, neuffer@goofy.zdv.uni-mainz.de\n" " Alfred Arnold, a.arnold@kfa-juelich.de\n" "This release only supports DASD devices (harddisks)\n", VER_MAJOR, VER_MINOR, VER_SUB);
-
- printk("Registered HBAs:\n");
- printk("HBA no. Boardtype: Revis: EATA: Bus: BaseIO: IRQ: Ch: ID: Pr:" " QS: SG: CPL:\n");
- for (i = 1; i <= registered_HBAs; i++) {
- printk("scsi%-2d: %.10s v%s 2.0%c %s %#.4lx %2d %d %d %c"
- " %2d %2d %2d\n",
- HBA_ptr->host_no, SD(HBA_ptr)->name, SD(HBA_ptr)->revision,
- SD(HBA_ptr)->EATA_revision, (SD(HBA_ptr)->bustype == 'P') ?
- "PCI " : (SD(HBA_ptr)->bustype == 'E') ? "EISA" : "ISA ",
- HBA_ptr->base, HBA_ptr->irq, SD(HBA_ptr)->channel, HBA_ptr->this_id,
- SD(HBA_ptr)->primary ? 'Y' : 'N', HBA_ptr->can_queue,
- HBA_ptr->sg_tablesize, HBA_ptr->cmd_per_lun);
- HBA_ptr = SD(HBA_ptr)->next;
- }
- }
- return (registered_HBAs);
-}
-
-static struct scsi_host_template driver_template = {
- .proc_name = "eata_pio",
- .name = "EATA (Extended Attachment) PIO driver",
- .show_info = eata_pio_show_info,
- .detect = eata_pio_detect,
- .release = eata_pio_release,
- .queuecommand = eata_pio_queue,
- .eh_abort_handler = eata_pio_abort,
- .eh_host_reset_handler = eata_pio_host_reset,
- .use_clustering = ENABLE_CLUSTERING,
-};
-
-MODULE_AUTHOR("Michael Neuffer, Alfred Arnold");
-MODULE_DESCRIPTION("EATA SCSI PIO driver");
-MODULE_LICENSE("GPL");
-
-#include "scsi_module.c"
diff --git a/drivers/scsi/eata_pio.h b/drivers/scsi/eata_pio.h
deleted file mode 100644
index 5b5e3d13670b..000000000000
--- a/drivers/scsi/eata_pio.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/********************************************************
-* Header file for eata_pio.c Linux EATA-PIO SCSI driver *
-* (c) 1993-96 Michael Neuffer *
-*********************************************************
-* last change: 2002/11/02 *
-********************************************************/
-
-
-#ifndef _EATA_PIO_H
-#define _EATA_PIO_H
-
-#define VER_MAJOR 0
-#define VER_MINOR 0
-#define VER_SUB "1b"
-
-/************************************************************************
- * Here you can switch parts of the code on and of *
- ************************************************************************/
-
-#define VERBOSE_SETUP /* show startup screen of 2001 */
-#define ALLOW_DMA_BOARDS 1
-
-/************************************************************************
- * Debug options. *
- * Enable DEBUG and whichever options you require. *
- ************************************************************************/
-#define DEBUG_EATA 1 /* Enable debug code. */
-#define DPT_DEBUG 0 /* Bobs special */
-#define DBG_DELAY 0 /* Build in delays so debug messages can be
- * be read before they vanish of the top of
- * the screen!
- */
-#define DBG_PROBE 0 /* Debug probe routines. */
-#define DBG_ISA 0 /* Trace ISA routines */
-#define DBG_EISA 0 /* Trace EISA routines */
-#define DBG_PCI 0 /* Trace PCI routines */
-#define DBG_PIO 0 /* Trace get_config_PIO */
-#define DBG_COM 0 /* Trace command call */
-#define DBG_QUEUE 0 /* Trace command queueing. */
-#define DBG_INTR 0 /* Trace interrupt service routine. */
-#define DBG_INTR2 0 /* Trace interrupt service routine. */
-#define DBG_PROC 0 /* Debug proc-fs related statistics */
-#define DBG_PROC_WRITE 0
-#define DBG_REGISTER 0 /* */
-#define DBG_ABNORM 1 /* Debug abnormal actions (reset, abort) */
-
-#if DEBUG_EATA
-#define DBG(x, y) if ((x)) {y;}
-#else
-#define DBG(x, y)
-#endif
-
-#endif /* _EATA_PIO_H */
diff --git a/drivers/scsi/esas2r/esas2r.h b/drivers/scsi/esas2r/esas2r.h
index 1da6407ee142..858c3b33db78 100644
--- a/drivers/scsi/esas2r/esas2r.h
+++ b/drivers/scsi/esas2r/esas2r.h
@@ -962,7 +962,6 @@ struct esas2r_adapter {
* Function Declarations
* SCSI functions
*/
-int esas2r_release(struct Scsi_Host *);
const char *esas2r_info(struct Scsi_Host *);
int esas2r_write_params(struct esas2r_adapter *a, struct esas2r_request *rq,
struct esas2r_sas_nvram *data);
@@ -984,7 +983,6 @@ int esas2r_target_reset(struct scsi_cmnd *cmd);
/* Internal functions */
int esas2r_init_adapter(struct Scsi_Host *host, struct pci_dev *pcid,
int index);
-int esas2r_cleanup(struct Scsi_Host *host);
int esas2r_read_fw(struct esas2r_adapter *a, char *buf, long off, int count);
int esas2r_write_fw(struct esas2r_adapter *a, const char *buf, long off,
int count);
diff --git a/drivers/scsi/esas2r/esas2r_init.c b/drivers/scsi/esas2r/esas2r_init.c
index 5b14dd29b764..9dffcb28c9b7 100644
--- a/drivers/scsi/esas2r/esas2r_init.c
+++ b/drivers/scsi/esas2r/esas2r_init.c
@@ -661,27 +661,6 @@ void esas2r_kill_adapter(int i)
}
}
-int esas2r_cleanup(struct Scsi_Host *host)
-{
- struct esas2r_adapter *a;
- int index;
-
- if (host == NULL) {
- int i;
-
- esas2r_debug("esas2r_cleanup everything");
- for (i = 0; i < MAX_ADAPTERS; i++)
- esas2r_kill_adapter(i);
- return -1;
- }
-
- esas2r_debug("esas2r_cleanup called for host %p", host);
- a = (struct esas2r_adapter *)host->hostdata;
- index = a->index;
- esas2r_kill_adapter(index);
- return index;
-}
-
int esas2r_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct Scsi_Host *host = pci_get_drvdata(pdev);
diff --git a/drivers/scsi/esas2r/esas2r_main.c b/drivers/scsi/esas2r/esas2r_main.c
index 4eb14301a497..e07eac5be087 100644
--- a/drivers/scsi/esas2r/esas2r_main.c
+++ b/drivers/scsi/esas2r/esas2r_main.c
@@ -235,7 +235,6 @@ static struct scsi_host_template driver_template = {
.module = THIS_MODULE,
.show_info = esas2r_show_info,
.name = ESAS2R_LONGNAME,
- .release = esas2r_release,
.info = esas2r_info,
.ioctl = esas2r_ioctl,
.queuecommand = esas2r_queuecommand,
@@ -520,44 +519,16 @@ static int esas2r_probe(struct pci_dev *pcid,
static void esas2r_remove(struct pci_dev *pdev)
{
- struct Scsi_Host *host;
- int index;
-
- if (pdev == NULL) {
- esas2r_log(ESAS2R_LOG_WARN, "esas2r_remove pdev==NULL");
- return;
- }
-
- host = pci_get_drvdata(pdev);
-
- if (host == NULL) {
- /*
- * this can happen if pci_set_drvdata was already called
- * to clear the host pointer. if this is the case, we
- * are okay; this channel has already been cleaned up.
- */
-
- return;
- }
+ struct Scsi_Host *host = pci_get_drvdata(pdev);
+ struct esas2r_adapter *a = (struct esas2r_adapter *)host->hostdata;
esas2r_log_dev(ESAS2R_LOG_INFO, &(pdev->dev),
"esas2r_remove(%p) called; "
"host:%p", pdev,
host);
- index = esas2r_cleanup(host);
-
- if (index < 0)
- esas2r_log_dev(ESAS2R_LOG_WARN, &(pdev->dev),
- "unknown host in %s",
- __func__);
-
+ esas2r_kill_adapter(a->index);
found_adapters--;
-
- /* if this was the last adapter, clean up the rest of the driver */
-
- if (found_adapters == 0)
- esas2r_cleanup(NULL);
}
static int __init esas2r_init(void)
@@ -638,30 +609,7 @@ static int __init esas2r_init(void)
for (i = 0; i < MAX_ADAPTERS; i++)
esas2r_adapters[i] = NULL;
- /* initialize */
-
- driver_template.module = THIS_MODULE;
-
- if (pci_register_driver(&esas2r_pci_driver) != 0)
- esas2r_log(ESAS2R_LOG_CRIT, "pci_register_driver FAILED");
- else
- esas2r_log(ESAS2R_LOG_INFO, "pci_register_driver() OK");
-
- if (!found_adapters) {
- pci_unregister_driver(&esas2r_pci_driver);
- esas2r_cleanup(NULL);
-
- esas2r_log(ESAS2R_LOG_CRIT,
- "driver will not be loaded because no ATTO "
- "%s devices were found",
- ESAS2R_DRVR_NAME);
- return -1;
- } else {
- esas2r_log(ESAS2R_LOG_INFO, "found %d adapters",
- found_adapters);
- }
-
- return 0;
+ return pci_register_driver(&esas2r_pci_driver);
}
/* Handle ioctl calls to "/proc/scsi/esas2r/ATTOnode" */
@@ -753,18 +701,6 @@ int esas2r_show_info(struct seq_file *m, struct Scsi_Host *sh)
}
-int esas2r_release(struct Scsi_Host *sh)
-{
- esas2r_log_dev(ESAS2R_LOG_INFO, &(sh->shost_gendev),
- "esas2r_release() called");
-
- esas2r_cleanup(sh);
- if (sh->irq)
- free_irq(sh->irq, NULL);
- scsi_unregister(sh);
- return 0;
-}
-
const char *esas2r_info(struct Scsi_Host *sh)
{
struct esas2r_adapter *a = (struct esas2r_adapter *)sh->hostdata;
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
deleted file mode 100644
index ebbe5a3e665d..000000000000
--- a/drivers/scsi/fdomain.c
+++ /dev/null
@@ -1,1783 +0,0 @@
-/* fdomain.c -- Future Domain TMC-16x0 SCSI driver
- * Created: Sun May 3 18:53:19 1992 by faith@cs.unc.edu
- * Revised: Mon Dec 28 21:59:02 1998 by faith@acm.org
- * Author: Rickard E. Faith, faith@cs.unc.edu
- * Copyright 1992-1996, 1998 Rickard E. Faith (faith@acm.org)
- * Shared IRQ supported added 7/7/2001 Alan Cox <alan@lxorguk.ukuu.org.uk>
-
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
-
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
-
- **************************************************************************
-
- SUMMARY:
-
- Future Domain BIOS versions supported for autodetect:
- 2.0, 3.0, 3.2, 3.4 (1.0), 3.5 (2.0), 3.6, 3.61
- Chips are supported:
- TMC-1800, TMC-18C50, TMC-18C30, TMC-36C70
- Boards supported:
- Future Domain TMC-1650, TMC-1660, TMC-1670, TMC-1680, TMC-1610M/MER/MEX
- Future Domain TMC-3260 (PCI)
- Quantum ISA-200S, ISA-250MG
- Adaptec AHA-2920A (PCI) [BUT *NOT* AHA-2920C -- use aic7xxx instead]
- IBM ?
- LILO/INSMOD command-line options:
- fdomain=<PORT_BASE>,<IRQ>[,<ADAPTER_ID>]
-
-
-
- NOTE:
-
- The Adaptec AHA-2920C has an Adaptec AIC-7850 chip on it.
- Use the aic7xxx driver for this board.
-
- The Adaptec AHA-2920A has a Future Domain chip on it, so this is the right
- driver for that card. Unfortunately, the boxes will probably just say
- "2920", so you'll have to look on the card for a Future Domain logo, or a
- letter after the 2920.
-
-
-
- THANKS:
-
- Thanks to Adaptec for providing PCI boards for testing. This finally
- enabled me to test the PCI detection and correct it for PCI boards that do
- not have a BIOS at a standard ISA location. For PCI boards, LILO/INSMOD
- command-line options should no longer be needed. --RF 18Nov98
-
-
-
- DESCRIPTION:
-
- This is the Linux low-level SCSI driver for Future Domain TMC-1660/1680
- TMC-1650/1670, and TMC-3260 SCSI host adapters. The 1650 and 1670 have a
- 25-pin external connector, whereas the 1660 and 1680 have a SCSI-2 50-pin
- high-density external connector. The 1670 and 1680 have floppy disk
- controllers built in. The TMC-3260 is a PCI bus card.
-
- Future Domain's older boards are based on the TMC-1800 chip, and this
- driver was originally written for a TMC-1680 board with the TMC-1800 chip.
- More recently, boards are being produced with the TMC-18C50 and TMC-18C30
- chips. The latest and greatest board may not work with this driver. If
- you have to patch this driver so that it will recognize your board's BIOS
- signature, then the driver may fail to function after the board is
- detected.
-
- Please note that the drive ordering that Future Domain implemented in BIOS
- versions 3.4 and 3.5 is the opposite of the order (currently) used by the
- rest of the SCSI industry. If you have BIOS version 3.4 or 3.5, and have
- more than one drive, then the drive ordering will be the reverse of that
- which you see under DOS. For example, under DOS SCSI ID 0 will be D: and
- SCSI ID 1 will be C: (the boot device). Under Linux, SCSI ID 0 will be
- /dev/sda and SCSI ID 1 will be /dev/sdb. The Linux ordering is consistent
- with that provided by all the other SCSI drivers for Linux. If you want
- this changed, you will probably have to patch the higher level SCSI code.
- If you do so, please send me patches that are protected by #ifdefs.
-
- If you have a TMC-8xx or TMC-9xx board, then this is not the driver for
- your board. Please refer to the Seagate driver for more information and
- possible support.
-
-
-
- HISTORY:
-
- Linux Driver Driver
- Version Version Date Support/Notes
-
- 0.0 3 May 1992 V2.0 BIOS; 1800 chip
- 0.97 1.9 28 Jul 1992
- 0.98.6 3.1 27 Nov 1992
- 0.99 3.2 9 Dec 1992
-
- 0.99.3 3.3 10 Jan 1993 V3.0 BIOS
- 0.99.5 3.5 18 Feb 1993
- 0.99.10 3.6 15 May 1993 V3.2 BIOS; 18C50 chip
- 0.99.11 3.17 3 Jul 1993 (now under RCS)
- 0.99.12 3.18 13 Aug 1993
- 0.99.14 5.6 31 Oct 1993 (reselection code removed)
-
- 0.99.15 5.9 23 Jan 1994 V3.4 BIOS (preliminary)
- 1.0.8/1.1.1 5.15 1 Apr 1994 V3.4 BIOS; 18C30 chip (preliminary)
- 1.0.9/1.1.3 5.16 7 Apr 1994 V3.4 BIOS; 18C30 chip
- 1.1.38 5.18 30 Jul 1994 36C70 chip (PCI version of 18C30)
- 1.1.62 5.20 2 Nov 1994 V3.5 BIOS
- 1.1.73 5.22 7 Dec 1994 Quantum ISA-200S board; V2.0 BIOS
-
- 1.1.82 5.26 14 Jan 1995 V3.5 BIOS; TMC-1610M/MER/MEX board
- 1.2.10 5.28 5 Jun 1995 Quantum ISA-250MG board; V2.0, V2.01 BIOS
- 1.3.4 5.31 23 Jun 1995 PCI BIOS-32 detection (preliminary)
- 1.3.7 5.33 4 Jul 1995 PCI BIOS-32 detection
- 1.3.28 5.36 17 Sep 1995 V3.61 BIOS; LILO command-line support
- 1.3.34 5.39 12 Oct 1995 V3.60 BIOS; /proc
- 1.3.72 5.39 8 Feb 1996 Adaptec AHA-2920 board
- 1.3.85 5.41 4 Apr 1996
- 2.0.12 5.44 8 Aug 1996 Use ID 7 for all PCI cards
- 2.1.1 5.45 2 Oct 1996 Update ROM accesses for 2.1.x
- 2.1.97 5.46 23 Apr 1998 Rewritten PCI detection routines [mj]
- 2.1.11x 5.47 9 Aug 1998 Touched for 8 SCSI disk majors support
- 5.48 18 Nov 1998 BIOS no longer needed for PCI detection
- 2.2.0 5.50 28 Dec 1998 Support insmod parameters
-
-
- REFERENCES USED:
-
- "TMC-1800 SCSI Chip Specification (FDC-1800T)", Future Domain Corporation,
- 1990.
-
- "Technical Reference Manual: 18C50 SCSI Host Adapter Chip", Future Domain
- Corporation, January 1992.
-
- "LXT SCSI Products: Specifications and OEM Technical Manual (Revision
- B/September 1991)", Maxtor Corporation, 1991.
-
- "7213S product Manual (Revision P3)", Maxtor Corporation, 1992.
-
- "Draft Proposed American National Standard: Small Computer System
- Interface - 2 (SCSI-2)", Global Engineering Documents. (X3T9.2/86-109,
- revision 10h, October 17, 1991)
-
- Private communications, Drew Eckhardt (drew@cs.colorado.edu) and Eric
- Youngdale (ericy@cais.com), 1992.
-
- Private communication, Tuong Le (Future Domain Engineering department),
- 1994. (Disk geometry computations for Future Domain BIOS version 3.4, and
- TMC-18C30 detection.)
-
- Hogan, Thom. The Programmer's PC Sourcebook. Microsoft Press, 1988. Page
- 60 (2.39: Disk Partition Table Layout).
-
- "18C30 Technical Reference Manual", Future Domain Corporation, 1993, page
- 6-1.
-
-
-
- NOTES ON REFERENCES:
-
- The Maxtor manuals were free. Maxtor telephone technical support is
- great!
-
- The Future Domain manuals were $25 and $35. They document the chip, not
- the TMC-16x0 boards, so some information I had to guess at. In 1992,
- Future Domain sold DOS BIOS source for $250 and the UN*X driver source was
- $750, but these required a non-disclosure agreement, so even if I could
- have afforded them, they would *not* have been useful for writing this
- publicly distributable driver. Future Domain technical support has
- provided some information on the phone and have sent a few useful FAXs.
- They have been much more helpful since they started to recognize that the
- word "Linux" refers to an operating system :-).
-
-
-
- ALPHA TESTERS:
-
- There are many other alpha testers that come and go as the driver
- develops. The people listed here were most helpful in times of greatest
- need (mostly early on -- I've probably left out a few worthy people in
- more recent times):
-
- Todd Carrico (todd@wutc.wustl.edu), Dan Poirier (poirier@cs.unc.edu ), Ken
- Corey (kenc@sol.acs.unt.edu), C. de Bruin (bruin@bruin@sterbbs.nl), Sakari
- Aaltonen (sakaria@vipunen.hit.fi), John Rice (rice@xanth.cs.odu.edu), Brad
- Yearwood (brad@optilink.com), and Ray Toy (toy@soho.crd.ge.com).
-
- Special thanks to Tien-Wan Yang (twyang@cs.uh.edu), who graciously lent me
- his 18C50-based card for debugging. He is the sole reason that this
- driver works with the 18C50 chip.
-
- Thanks to Dave Newman (dnewman@crl.com) for providing initial patches for
- the version 3.4 BIOS.
-
- Thanks to James T. McKinley (mckinley@msupa.pa.msu.edu) for providing
- patches that support the TMC-3260, a PCI bus card with the 36C70 chip.
- The 36C70 chip appears to be "completely compatible" with the 18C30 chip.
-
- Thanks to Eric Kasten (tigger@petroglyph.cl.msu.edu) for providing the
- patch for the version 3.5 BIOS.
-
- Thanks for Stephen Henson (shenson@nyx10.cs.du.edu) for providing the
- patch for the Quantum ISA-200S SCSI adapter.
-
- Thanks to Adam Bowen for the signature to the 1610M/MER/MEX scsi cards, to
- Martin Andrews (andrewm@ccfadm.eeg.ccf.org) for the signature to some
- random TMC-1680 repackaged by IBM; and to Mintak Ng (mintak@panix.com) for
- the version 3.61 BIOS signature.
-
- Thanks for Mark Singer (elf@netcom.com) and Richard Simpson
- (rsimpson@ewrcsdra.demon.co.uk) for more Quantum signatures and detective
- work on the Quantum RAM layout.
-
- Special thanks to James T. McKinley (mckinley@msupa.pa.msu.edu) for
- providing patches for proper PCI BIOS32-mediated detection of the TMC-3260
- card (a PCI bus card with the 36C70 chip). Please send James PCI-related
- bug reports.
-
- Thanks to Tom Cavin (tec@usa1.com) for preliminary command-line option
- patches.
-
- New PCI detection code written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
-
- Insmod parameter code based on patches from Daniel Graham
- <graham@balance.uoregon.edu>.
-
- All of the alpha testers deserve much thanks.
-
-
-
- NOTES ON USER DEFINABLE OPTIONS:
-
- DEBUG: This turns on the printing of various debug information.
-
- ENABLE_PARITY: This turns on SCSI parity checking. With the current
- driver, all attached devices must support SCSI parity. If none of your
- devices support parity, then you can probably get the driver to work by
- turning this option off. I have no way of testing this, however, and it
- would appear that no one ever uses this option.
-
- FIFO_COUNT: The host adapter has an 8K cache (host adapters based on the
- 18C30 chip have a 2k cache). When this many 512 byte blocks are filled by
- the SCSI device, an interrupt will be raised. Therefore, this could be as
- low as 0, or as high as 16. Note, however, that values which are too high
- or too low seem to prevent any interrupts from occurring, and thereby lock
- up the machine. I have found that 2 is a good number, but throughput may
- be increased by changing this value to values which are close to 2.
- Please let me know if you try any different values.
-
- RESELECTION: This is no longer an option, since I gave up trying to
- implement it in version 4.x of this driver. It did not improve
- performance at all and made the driver unstable (because I never found one
- of the two race conditions which were introduced by the multiple
- outstanding command code). The instability seems a very high price to pay
- just so that you don't have to wait for the tape to rewind. If you want
- this feature implemented, send me patches. I'll be happy to send a copy
- of my (broken) driver to anyone who would like to see a copy.
-
- **************************************************************************/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/proc_fs.h>
-#include <linux/pci.h>
-#include <linux/stat.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <scsi/scsicam.h>
-
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_ioctl.h>
-#include "fdomain.h"
-
-#ifndef PCMCIA
-MODULE_AUTHOR("Rickard E. Faith");
-MODULE_DESCRIPTION("Future domain SCSI driver");
-MODULE_LICENSE("GPL");
-#endif
-
-
-#define VERSION "$Revision: 5.51 $"
-
-/* START OF USER DEFINABLE OPTIONS */
-
-#define DEBUG 0 /* Enable debugging output */
-#define ENABLE_PARITY 1 /* Enable SCSI Parity */
-#define FIFO_COUNT 2 /* Number of 512 byte blocks before INTR */
-
-/* END OF USER DEFINABLE OPTIONS */
-
-#if DEBUG
-#define EVERY_ACCESS 0 /* Write a line on every scsi access */
-#define ERRORS_ONLY 1 /* Only write a line if there is an error */
-#define DEBUG_DETECT 0 /* Debug fdomain_16x0_detect() */
-#define DEBUG_MESSAGES 1 /* Debug MESSAGE IN phase */
-#define DEBUG_ABORT 1 /* Debug abort() routine */
-#define DEBUG_RESET 1 /* Debug reset() routine */
-#define DEBUG_RACE 1 /* Debug interrupt-driven race condition */
-#else
-#define EVERY_ACCESS 0 /* LEAVE THESE ALONE--CHANGE THE ONES ABOVE */
-#define ERRORS_ONLY 0
-#define DEBUG_DETECT 0
-#define DEBUG_MESSAGES 0
-#define DEBUG_ABORT 0
-#define DEBUG_RESET 0
-#define DEBUG_RACE 0
-#endif
-
-/* Errors are reported on the line, so we don't need to report them again */
-#if EVERY_ACCESS
-#undef ERRORS_ONLY
-#define ERRORS_ONLY 0
-#endif
-
-#if ENABLE_PARITY
-#define PARITY_MASK 0x08
-#else
-#define PARITY_MASK 0x00
-#endif
-
-enum chip_type {
- unknown = 0x00,
- tmc1800 = 0x01,
- tmc18c50 = 0x02,
- tmc18c30 = 0x03,
-};
-
-enum {
- in_arbitration = 0x02,
- in_selection = 0x04,
- in_other = 0x08,
- disconnect = 0x10,
- aborted = 0x20,
- sent_ident = 0x40,
-};
-
-enum in_port_type {
- Read_SCSI_Data = 0,
- SCSI_Status = 1,
- TMC_Status = 2,
- FIFO_Status = 3, /* tmc18c50/tmc18c30 only */
- Interrupt_Cond = 4, /* tmc18c50/tmc18c30 only */
- LSB_ID_Code = 5,
- MSB_ID_Code = 6,
- Read_Loopback = 7,
- SCSI_Data_NoACK = 8,
- Interrupt_Status = 9,
- Configuration1 = 10,
- Configuration2 = 11, /* tmc18c50/tmc18c30 only */
- Read_FIFO = 12,
- FIFO_Data_Count = 14
-};
-
-enum out_port_type {
- Write_SCSI_Data = 0,
- SCSI_Cntl = 1,
- Interrupt_Cntl = 2,
- SCSI_Mode_Cntl = 3,
- TMC_Cntl = 4,
- Memory_Cntl = 5, /* tmc18c50/tmc18c30 only */
- Write_Loopback = 7,
- IO_Control = 11, /* tmc18c30 only */
- Write_FIFO = 12
-};
-
-/* .bss will zero all the static variables below */
-static int port_base;
-static unsigned long bios_base;
-static void __iomem * bios_mem;
-static int bios_major;
-static int bios_minor;
-static int PCI_bus;
-#ifdef CONFIG_PCI
-static struct pci_dev *PCI_dev;
-#endif
-static int Quantum; /* Quantum board variant */
-static int interrupt_level;
-static volatile int in_command;
-static struct scsi_cmnd *current_SC;
-static enum chip_type chip = unknown;
-static int adapter_mask;
-static int this_id;
-static int setup_called;
-
-#if DEBUG_RACE
-static volatile int in_interrupt_flag;
-#endif
-
-static int FIFO_Size = 0x2000; /* 8k FIFO for
- pre-tmc18c30 chips */
-
-static irqreturn_t do_fdomain_16x0_intr( int irq, void *dev_id );
-/* Allow insmod parameters to be like LILO parameters. For example:
- insmod fdomain fdomain=0x140,11 */
-static char * fdomain = NULL;
-module_param(fdomain, charp, 0);
-
-#ifndef PCMCIA
-
-static unsigned long addresses[] = {
- 0xc8000,
- 0xca000,
- 0xce000,
- 0xde000,
- 0xcc000, /* Extra addresses for PCI boards */
- 0xd0000,
- 0xe0000,
-};
-#define ADDRESS_COUNT ARRAY_SIZE(addresses)
-
-static unsigned short ports[] = { 0x140, 0x150, 0x160, 0x170 };
-#define PORT_COUNT ARRAY_SIZE(ports)
-
-static unsigned short ints[] = { 3, 5, 10, 11, 12, 14, 15, 0 };
-
-#endif /* !PCMCIA */
-
-/*
-
- READ THIS BEFORE YOU ADD A SIGNATURE!
-
- READING THIS SHORT NOTE CAN SAVE YOU LOTS OF TIME!
-
- READ EVERY WORD, ESPECIALLY THE WORD *NOT*
-
- This driver works *ONLY* for Future Domain cards using the TMC-1800,
- TMC-18C50, or TMC-18C30 chip. This includes models TMC-1650, 1660, 1670,
- and 1680. These are all 16-bit cards.
-
- The following BIOS signature signatures are for boards which do *NOT*
- work with this driver (these TMC-8xx and TMC-9xx boards may work with the
- Seagate driver):
-
- FUTURE DOMAIN CORP. (C) 1986-1988 V4.0I 03/16/88
- FUTURE DOMAIN CORP. (C) 1986-1989 V5.0C2/14/89
- FUTURE DOMAIN CORP. (C) 1986-1989 V6.0A7/28/89
- FUTURE DOMAIN CORP. (C) 1986-1990 V6.0105/31/90
- FUTURE DOMAIN CORP. (C) 1986-1990 V6.0209/18/90
- FUTURE DOMAIN CORP. (C) 1986-1990 V7.009/18/90
- FUTURE DOMAIN CORP. (C) 1992 V8.00.004/02/92
-
- (The cards which do *NOT* work are all 8-bit cards -- although some of
- them have a 16-bit form-factor, the upper 8-bits are used only for IRQs
- and are *NOT* used for data. You can tell the difference by following
- the tracings on the circuit board -- if only the IRQ lines are involved,
- you have a "8-bit" card, and should *NOT* use this driver.)
-
-*/
-
-#ifndef PCMCIA
-
-static struct signature {
- const char *signature;
- int sig_offset;
- int sig_length;
- int major_bios_version;
- int minor_bios_version;
- int flag; /* 1 == PCI_bus, 2 == ISA_200S, 3 == ISA_250MG, 4 == ISA_200S */
-} signatures[] = {
- /* 1 2 3 4 5 6 */
- /* 123456789012345678901234567890123456789012345678901234567890 */
- { "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V2.07/28/89", 5, 50, 2, 0, 0 },
- { "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V1.07/28/89", 5, 50, 2, 0, 0 },
- { "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V2.07/28/89", 72, 50, 2, 0, 2 },
- { "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V2.0", 73, 43, 2, 0, 3 },
- { "FUTURE DOMAIN CORP. (C) 1991 1800-V2.0.", 72, 39, 2, 0, 4 },
- { "FUTURE DOMAIN CORP. (C) 1992 V3.00.004/02/92", 5, 44, 3, 0, 0 },
- { "FUTURE DOMAIN TMC-18XX (C) 1993 V3.203/12/93", 5, 44, 3, 2, 0 },
- { "IBM F1 P2 BIOS v1.0104/29/93", 5, 28, 3, -1, 0 },
- { "Future Domain Corp. V1.0008/18/93", 5, 33, 3, 4, 0 },
- { "Future Domain Corp. V1.0008/18/93", 26, 33, 3, 4, 1 },
- { "Adaptec AHA-2920 PCI-SCSI Card", 42, 31, 3, -1, 1 },
- { "IBM F1 P264/32", 5, 14, 3, -1, 1 },
- /* This next signature may not be a 3.5 bios */
- { "Future Domain Corp. V2.0108/18/93", 5, 33, 3, 5, 0 },
- { "FUTURE DOMAIN CORP. V3.5008/18/93", 5, 34, 3, 5, 0 },
- { "FUTURE DOMAIN 18c30/18c50/1800 (C) 1994 V3.5", 5, 44, 3, 5, 0 },
- { "FUTURE DOMAIN CORP. V3.6008/18/93", 5, 34, 3, 6, 0 },
- { "FUTURE DOMAIN CORP. V3.6108/18/93", 5, 34, 3, 6, 0 },
- { "FUTURE DOMAIN TMC-18XX", 5, 22, -1, -1, 0 },
-
- /* READ NOTICE ABOVE *BEFORE* YOU WASTE YOUR TIME ADDING A SIGNATURE
- Also, fix the disk geometry code for your signature and send your
- changes for faith@cs.unc.edu. Above all, do *NOT* change any old
- signatures!
-
- Note that the last line will match a "generic" 18XX bios. Because
- Future Domain has changed the host SCSI ID and/or the location of the
- geometry information in the on-board RAM area for each of the first
- three BIOS's, it is still important to enter a fully qualified
- signature in the table for any new BIOS's (after the host SCSI ID and
- geometry location are verified). */
-};
-
-#define SIGNATURE_COUNT ARRAY_SIZE(signatures)
-
-#endif /* !PCMCIA */
-
-static void print_banner( struct Scsi_Host *shpnt )
-{
- if (!shpnt) return; /* This won't ever happen */
-
- if (bios_major < 0 && bios_minor < 0) {
- printk(KERN_INFO "scsi%d: <fdomain> No BIOS; using scsi id %d\n",
- shpnt->host_no, shpnt->this_id);
- } else {
- printk(KERN_INFO "scsi%d: <fdomain> BIOS version ", shpnt->host_no);
-
- if (bios_major >= 0) printk("%d.", bios_major);
- else printk("?.");
-
- if (bios_minor >= 0) printk("%d", bios_minor);
- else printk("?.");
-
- printk( " at 0x%lx using scsi id %d\n",
- bios_base, shpnt->this_id );
- }
-
- /* If this driver works for later FD PCI
- boards, we will have to modify banner
- for additional PCI cards, but for now if
- it's PCI it's a TMC-3260 - JTM */
- printk(KERN_INFO "scsi%d: <fdomain> %s chip at 0x%x irq ",
- shpnt->host_no,
- chip == tmc1800 ? "TMC-1800" : (chip == tmc18c50 ? "TMC-18C50" : (chip == tmc18c30 ? (PCI_bus ? "TMC-36C70 (PCI bus)" : "TMC-18C30") : "Unknown")),
- port_base);
-
- if (interrupt_level)
- printk("%d", interrupt_level);
- else
- printk("<none>");
-
- printk( "\n" );
-}
-
-int fdomain_setup(char *str)
-{
- int ints[4];
-
- (void)get_options(str, ARRAY_SIZE(ints), ints);
-
- if (setup_called++ || ints[0] < 2 || ints[0] > 3) {
- printk(KERN_INFO "scsi: <fdomain> Usage: fdomain=<PORT_BASE>,<IRQ>[,<ADAPTER_ID>]\n");
- printk(KERN_ERR "scsi: <fdomain> Bad LILO/INSMOD parameters?\n");
- return 0;
- }
-
- port_base = ints[0] >= 1 ? ints[1] : 0;
- interrupt_level = ints[0] >= 2 ? ints[2] : 0;
- this_id = ints[0] >= 3 ? ints[3] : 0;
-
- bios_major = bios_minor = -1; /* Use geometry for BIOS version >= 3.4 */
- ++setup_called;
- return 1;
-}
-
-__setup("fdomain=", fdomain_setup);
-
-
-static void do_pause(unsigned amount) /* Pause for amount*10 milliseconds */
-{
- mdelay(10*amount);
-}
-
-static inline void fdomain_make_bus_idle( void )
-{
- outb(0, port_base + SCSI_Cntl);
- outb(0, port_base + SCSI_Mode_Cntl);
- if (chip == tmc18c50 || chip == tmc18c30)
- outb(0x21 | PARITY_MASK, port_base + TMC_Cntl); /* Clear forced intr. */
- else
- outb(0x01 | PARITY_MASK, port_base + TMC_Cntl);
-}
-
-static int fdomain_is_valid_port( int port )
-{
-#if DEBUG_DETECT
- printk( " (%x%x),",
- inb( port + MSB_ID_Code ), inb( port + LSB_ID_Code ) );
-#endif
-
- /* The MCA ID is a unique id for each MCA compatible board. We
- are using ISA boards, but Future Domain provides the MCA ID
- anyway. We can use this ID to ensure that this is a Future
- Domain TMC-1660/TMC-1680.
- */
-
- if (inb( port + LSB_ID_Code ) != 0xe9) { /* test for 0x6127 id */
- if (inb( port + LSB_ID_Code ) != 0x27) return 0;
- if (inb( port + MSB_ID_Code ) != 0x61) return 0;
- chip = tmc1800;
- } else { /* test for 0xe960 id */
- if (inb( port + MSB_ID_Code ) != 0x60) return 0;
- chip = tmc18c50;
-
- /* Try to toggle 32-bit mode. This only
- works on an 18c30 chip. (User reports
- say this works, so we should switch to
- it in the near future.) */
-
- outb( 0x80, port + IO_Control );
- if ((inb( port + Configuration2 ) & 0x80) == 0x80) {
- outb( 0x00, port + IO_Control );
- if ((inb( port + Configuration2 ) & 0x80) == 0x00) {
- chip = tmc18c30;
- FIFO_Size = 0x800; /* 2k FIFO */
- }
- }
- /* If that failed, we are an 18c50. */
- }
-
- return 1;
-}
-
-static int fdomain_test_loopback( void )
-{
- int i;
- int result;
-
- for (i = 0; i < 255; i++) {
- outb( i, port_base + Write_Loopback );
- result = inb( port_base + Read_Loopback );
- if (i != result)
- return 1;
- }
- return 0;
-}
-
-#ifndef PCMCIA
-
-/* fdomain_get_irq assumes that we have a valid MCA ID for a
- TMC-1660/TMC-1680 Future Domain board. Now, check to be sure the
- bios_base matches these ports. If someone was unlucky enough to have
- purchased more than one Future Domain board, then they will have to
- modify this code, as we only detect one board here. [The one with the
- lowest bios_base.]
-
- Note that this routine is only used for systems without a PCI BIOS32
- (e.g., ISA bus). For PCI bus systems, this routine will likely fail
- unless one of the IRQs listed in the ints array is used by the board.
- Sometimes it is possible to use the computer's BIOS setup screen to
- configure a PCI system so that one of these IRQs will be used by the
- Future Domain card. */
-
-static int fdomain_get_irq( int base )
-{
- int options = inb(base + Configuration1);
-
-#if DEBUG_DETECT
- printk("scsi: <fdomain> Options = %x\n", options);
-#endif
-
- /* Check for board with lowest bios_base --
- this isn't valid for the 18c30 or for
- boards on the PCI bus, so just assume we
- have the right board. */
-
- if (chip != tmc18c30 && !PCI_bus && addresses[(options & 0xc0) >> 6 ] != bios_base)
- return 0;
- return ints[(options & 0x0e) >> 1];
-}
-
-static int fdomain_isa_detect( int *irq, int *iobase )
-{
- int i, j;
- int base = 0xdeadbeef;
- int flag = 0;
-
-#if DEBUG_DETECT
- printk( "scsi: <fdomain> fdomain_isa_detect:" );
-#endif
-
- for (i = 0; i < ADDRESS_COUNT; i++) {
- void __iomem *p = ioremap(addresses[i], 0x2000);
- if (!p)
- continue;
-#if DEBUG_DETECT
- printk( " %lx(%lx),", addresses[i], bios_base );
-#endif
- for (j = 0; j < SIGNATURE_COUNT; j++) {
- if (check_signature(p + signatures[j].sig_offset,
- signatures[j].signature,
- signatures[j].sig_length )) {
- bios_major = signatures[j].major_bios_version;
- bios_minor = signatures[j].minor_bios_version;
- PCI_bus = (signatures[j].flag == 1);
- Quantum = (signatures[j].flag > 1) ? signatures[j].flag : 0;
- bios_base = addresses[i];
- bios_mem = p;
- goto found;
- }
- }
- iounmap(p);
- }
-
-found:
- if (bios_major == 2) {
- /* The TMC-1660/TMC-1680 has a RAM area just after the BIOS ROM.
- Assuming the ROM is enabled (otherwise we wouldn't have been
- able to read the ROM signature :-), then the ROM sets up the
- RAM area with some magic numbers, such as a list of port
- base addresses and a list of the disk "geometry" reported to
- DOS (this geometry has nothing to do with physical geometry).
- */
-
- switch (Quantum) {
- case 2: /* ISA_200S */
- case 3: /* ISA_250MG */
- base = readb(bios_mem + 0x1fa2) + (readb(bios_mem + 0x1fa3) << 8);
- break;
- case 4: /* ISA_200S (another one) */
- base = readb(bios_mem + 0x1fa3) + (readb(bios_mem + 0x1fa4) << 8);
- break;
- default:
- base = readb(bios_mem + 0x1fcc) + (readb(bios_mem + 0x1fcd) << 8);
- break;
- }
-
-#if DEBUG_DETECT
- printk( " %x,", base );
-#endif
-
- for (i = 0; i < PORT_COUNT; i++) {
- if (base == ports[i]) {
- if (!request_region(base, 0x10, "fdomain"))
- break;
- if (!fdomain_is_valid_port(base)) {
- release_region(base, 0x10);
- break;
- }
- *irq = fdomain_get_irq( base );
- *iobase = base;
- return 1;
- }
- }
-
- /* This is a bad sign. It usually means that someone patched the
- BIOS signature list (the signatures variable) to contain a BIOS
- signature for a board *OTHER THAN* the TMC-1660/TMC-1680. */
-
-#if DEBUG_DETECT
- printk( " RAM FAILED, " );
-#endif
- }
-
- /* Anyway, the alternative to finding the address in the RAM is to just
- search through every possible port address for one that is attached
- to the Future Domain card. Don't panic, though, about reading all
- these random port addresses -- there are rumors that the Future
- Domain BIOS does something very similar.
-
- Do not, however, check ports which the kernel knows are being used by
- another driver. */
-
- for (i = 0; i < PORT_COUNT; i++) {
- base = ports[i];
- if (!request_region(base, 0x10, "fdomain")) {
-#if DEBUG_DETECT
- printk( " (%x inuse),", base );
-#endif
- continue;
- }
-#if DEBUG_DETECT
- printk( " %x,", base );
-#endif
- flag = fdomain_is_valid_port(base);
- if (flag)
- break;
- release_region(base, 0x10);
- }
-
-#if DEBUG_DETECT
- if (flag) printk( " SUCCESS\n" );
- else printk( " FAILURE\n" );
-#endif
-
- if (!flag) return 0; /* iobase not found */
-
- *irq = fdomain_get_irq( base );
- *iobase = base;
-
- return 1; /* success */
-}
-
-#else /* PCMCIA */
-
-static int fdomain_isa_detect( int *irq, int *iobase )
-{
- if (irq)
- *irq = 0;
- if (iobase)
- *iobase = 0;
- return 0;
-}
-
-#endif /* !PCMCIA */
-
-
-/* PCI detection function: int fdomain_pci_bios_detect(int* irq, int*
- iobase) This function gets the Interrupt Level and I/O base address from
- the PCI configuration registers. */
-
-#ifdef CONFIG_PCI
-static int fdomain_pci_bios_detect( int *irq, int *iobase, struct pci_dev **ret_pdev )
-{
- unsigned int pci_irq; /* PCI interrupt line */
- unsigned long pci_base; /* PCI I/O base address */
- struct pci_dev *pdev = NULL;
-
-#if DEBUG_DETECT
- /* Tell how to print a list of the known PCI devices from bios32 and
- list vendor and device IDs being used if in debug mode. */
-
- printk( "scsi: <fdomain> INFO: use lspci -v to see list of PCI devices\n" );
- printk( "scsi: <fdomain> TMC-3260 detect:"
- " Using Vendor ID: 0x%x and Device ID: 0x%x\n",
- PCI_VENDOR_ID_FD,
- PCI_DEVICE_ID_FD_36C70 );
-#endif
-
- if ((pdev = pci_get_device(PCI_VENDOR_ID_FD, PCI_DEVICE_ID_FD_36C70, pdev)) == NULL)
- return 0;
- if (pci_enable_device(pdev))
- goto fail;
-
-#if DEBUG_DETECT
- printk( "scsi: <fdomain> TMC-3260 detect:"
- " PCI bus %u, device %u, function %u\n",
- pdev->bus->number,
- PCI_SLOT(pdev->devfn),
- PCI_FUNC(pdev->devfn));
-#endif
-
- /* We now have the appropriate device function for the FD board so we
- just read the PCI config info from the registers. */
-
- pci_base = pci_resource_start(pdev, 0);
- pci_irq = pdev->irq;
-
- if (!request_region( pci_base, 0x10, "fdomain" ))
- goto fail;
-
- /* Now we have the I/O base address and interrupt from the PCI
- configuration registers. */
-
- *irq = pci_irq;
- *iobase = pci_base;
- *ret_pdev = pdev;
-
-#if DEBUG_DETECT
- printk( "scsi: <fdomain> TMC-3260 detect:"
- " IRQ = %d, I/O base = 0x%x [0x%lx]\n", *irq, *iobase, pci_base );
-#endif
-
- if (!fdomain_is_valid_port(pci_base)) {
- printk(KERN_ERR "scsi: <fdomain> PCI card detected, but driver not loaded (invalid port)\n" );
- release_region(pci_base, 0x10);
- goto fail;
- }
-
- /* Fill in a few global variables. Ugh. */
- bios_major = bios_minor = -1;
- PCI_bus = 1;
- PCI_dev = pdev;
- Quantum = 0;
- bios_base = 0;
-
- return 1;
-fail:
- pci_dev_put(pdev);
- return 0;
-}
-
-#endif
-
-struct Scsi_Host *__fdomain_16x0_detect(struct scsi_host_template *tpnt )
-{
- int retcode;
- struct Scsi_Host *shpnt;
- struct pci_dev *pdev = NULL;
-
- if (setup_called) {
-#if DEBUG_DETECT
- printk( "scsi: <fdomain> No BIOS, using port_base = 0x%x, irq = %d\n",
- port_base, interrupt_level );
-#endif
- if (!request_region(port_base, 0x10, "fdomain")) {
- printk( "scsi: <fdomain> port 0x%x is busy\n", port_base );
- printk( "scsi: <fdomain> Bad LILO/INSMOD parameters?\n" );
- return NULL;
- }
- if (!fdomain_is_valid_port( port_base )) {
- printk( "scsi: <fdomain> Cannot locate chip at port base 0x%x\n",
- port_base );
- printk( "scsi: <fdomain> Bad LILO/INSMOD parameters?\n" );
- release_region(port_base, 0x10);
- return NULL;
- }
- } else {
- int flag = 0;
-
-#ifdef CONFIG_PCI
- /* Try PCI detection first */
- flag = fdomain_pci_bios_detect( &interrupt_level, &port_base, &pdev );
-#endif
- if (!flag) {
- /* Then try ISA bus detection */
- flag = fdomain_isa_detect( &interrupt_level, &port_base );
-
- if (!flag) {
- printk( "scsi: <fdomain> Detection failed (no card)\n" );
- return NULL;
- }
- }
- }
-
- fdomain_16x0_host_reset(NULL);
-
- if (fdomain_test_loopback()) {
- printk(KERN_ERR "scsi: <fdomain> Detection failed (loopback test failed at port base 0x%x)\n", port_base);
- if (setup_called) {
- printk(KERN_ERR "scsi: <fdomain> Bad LILO/INSMOD parameters?\n");
- }
- goto fail;
- }
-
- if (this_id) {
- tpnt->this_id = (this_id & 0x07);
- adapter_mask = (1 << tpnt->this_id);
- } else {
- if (PCI_bus || (bios_major == 3 && bios_minor >= 2) || bios_major < 0) {
- tpnt->this_id = 7;
- adapter_mask = 0x80;
- } else {
- tpnt->this_id = 6;
- adapter_mask = 0x40;
- }
- }
-
-/* Print out a banner here in case we can't
- get resources. */
-
- shpnt = scsi_register( tpnt, 0 );
- if(shpnt == NULL) {
- release_region(port_base, 0x10);
- return NULL;
- }
- shpnt->irq = interrupt_level;
- shpnt->io_port = port_base;
- shpnt->n_io_port = 0x10;
- print_banner( shpnt );
-
- /* Log IRQ with kernel */
- if (!interrupt_level) {
- printk(KERN_ERR "scsi: <fdomain> Card Detected, but driver not loaded (no IRQ)\n" );
- goto fail;
- } else {
- /* Register the IRQ with the kernel */
-
- retcode = request_irq( interrupt_level,
- do_fdomain_16x0_intr, pdev?IRQF_SHARED:0, "fdomain", shpnt);
-
- if (retcode < 0) {
- if (retcode == -EINVAL) {
- printk(KERN_ERR "scsi: <fdomain> IRQ %d is bad!\n", interrupt_level );
- printk(KERN_ERR " This shouldn't happen!\n" );
- printk(KERN_ERR " Send mail to faith@acm.org\n" );
- } else if (retcode == -EBUSY) {
- printk(KERN_ERR "scsi: <fdomain> IRQ %d is already in use!\n", interrupt_level );
- printk(KERN_ERR " Please use another IRQ!\n" );
- } else {
- printk(KERN_ERR "scsi: <fdomain> Error getting IRQ %d\n", interrupt_level );
- printk(KERN_ERR " This shouldn't happen!\n" );
- printk(KERN_ERR " Send mail to faith@acm.org\n" );
- }
- printk(KERN_ERR "scsi: <fdomain> Detected, but driver not loaded (IRQ)\n" );
- goto fail;
- }
- }
- return shpnt;
-fail:
- pci_dev_put(pdev);
- release_region(port_base, 0x10);
- return NULL;
-}
-
-static int fdomain_16x0_detect(struct scsi_host_template *tpnt)
-{
- if (fdomain)
- fdomain_setup(fdomain);
- return (__fdomain_16x0_detect(tpnt) != NULL);
-}
-
-static const char *fdomain_16x0_info( struct Scsi_Host *ignore )
-{
- static char buffer[128];
- char *pt;
-
- strcpy( buffer, "Future Domain 16-bit SCSI Driver Version" );
- if (strchr( VERSION, ':')) { /* Assume VERSION is an RCS Revision string */
- strcat( buffer, strchr( VERSION, ':' ) + 1 );
- pt = strrchr( buffer, '$') - 1;
- if (!pt) /* Stripped RCS Revision string? */
- pt = buffer + strlen( buffer ) - 1;
- if (*pt != ' ')
- ++pt;
- *pt = '\0';
- } else { /* Assume VERSION is a number */
- strcat( buffer, " " VERSION );
- }
-
- return buffer;
-}
-
-#if 0
-static int fdomain_arbitrate( void )
-{
- int status = 0;
- unsigned long timeout;
-
-#if EVERY_ACCESS
- printk( "fdomain_arbitrate()\n" );
-#endif
-
- outb(0x00, port_base + SCSI_Cntl); /* Disable data drivers */
- outb(adapter_mask, port_base + SCSI_Data_NoACK); /* Set our id bit */
- outb(0x04 | PARITY_MASK, port_base + TMC_Cntl); /* Start arbitration */
-
- timeout = 500;
- do {
- status = inb(port_base + TMC_Status); /* Read adapter status */
- if (status & 0x02) /* Arbitration complete */
- return 0;
- mdelay(1); /* Wait one millisecond */
- } while (--timeout);
-
- /* Make bus idle */
- fdomain_make_bus_idle();
-
-#if EVERY_ACCESS
- printk( "Arbitration failed, status = %x\n", status );
-#endif
-#if ERRORS_ONLY
- printk( "scsi: <fdomain> Arbitration failed, status = %x\n", status );
-#endif
- return 1;
-}
-#endif
-
-static int fdomain_select( int target )
-{
- int status;
- unsigned long timeout;
-#if ERRORS_ONLY
- static int flag = 0;
-#endif
-
- outb(0x82, port_base + SCSI_Cntl); /* Bus Enable + Select */
- outb(adapter_mask | (1 << target), port_base + SCSI_Data_NoACK);
-
- /* Stop arbitration and enable parity */
- outb(PARITY_MASK, port_base + TMC_Cntl);
-
- timeout = 350; /* 350 msec */
-
- do {
- status = inb(port_base + SCSI_Status); /* Read adapter status */
- if (status & 1) { /* Busy asserted */
- /* Enable SCSI Bus (on error, should make bus idle with 0) */
- outb(0x80, port_base + SCSI_Cntl);
- return 0;
- }
- mdelay(1); /* wait one msec */
- } while (--timeout);
- /* Make bus idle */
- fdomain_make_bus_idle();
-#if EVERY_ACCESS
- if (!target) printk( "Selection failed\n" );
-#endif
-#if ERRORS_ONLY
- if (!target) {
- if (!flag) /* Skip first failure for all chips. */
- ++flag;
- else
- printk( "scsi: <fdomain> Selection failed\n" );
- }
-#endif
- return 1;
-}
-
-static void my_done(int error)
-{
- if (in_command) {
- in_command = 0;
- outb(0x00, port_base + Interrupt_Cntl);
- fdomain_make_bus_idle();
- current_SC->result = error;
- if (current_SC->scsi_done)
- current_SC->scsi_done( current_SC );
- else panic( "scsi: <fdomain> current_SC->scsi_done() == NULL" );
- } else {
- panic( "scsi: <fdomain> my_done() called outside of command\n" );
- }
-#if DEBUG_RACE
- in_interrupt_flag = 0;
-#endif
-}
-
-static irqreturn_t do_fdomain_16x0_intr(int irq, void *dev_id)
-{
- unsigned long flags;
- int status;
- int done = 0;
- unsigned data_count;
-
- /* The fdomain_16x0_intr is only called via
- the interrupt handler. The goal of the
- sti() here is to allow other
- interruptions while this routine is
- running. */
-
- /* Check for other IRQ sources */
- if ((inb(port_base + TMC_Status) & 0x01) == 0)
- return IRQ_NONE;
-
- /* It is our IRQ */
- outb(0x00, port_base + Interrupt_Cntl);
-
- /* We usually have one spurious interrupt after each command. Ignore it. */
- if (!in_command || !current_SC) { /* Spurious interrupt */
-#if EVERY_ACCESS
- printk( "Spurious interrupt, in_command = %d, current_SC = %x\n",
- in_command, current_SC );
-#endif
- return IRQ_NONE;
- }
-
- /* Abort calls my_done, so we do nothing here. */
- if (current_SC->SCp.phase & aborted) {
-#if DEBUG_ABORT
- printk( "scsi: <fdomain> Interrupt after abort, ignoring\n" );
-#endif
- /*
- return IRQ_HANDLED; */
- }
-
-#if DEBUG_RACE
- ++in_interrupt_flag;
-#endif
-
- if (current_SC->SCp.phase & in_arbitration) {
- status = inb(port_base + TMC_Status); /* Read adapter status */
- if (!(status & 0x02)) {
-#if EVERY_ACCESS
- printk( " AFAIL " );
-#endif
- spin_lock_irqsave(current_SC->device->host->host_lock, flags);
- my_done( DID_BUS_BUSY << 16 );
- spin_unlock_irqrestore(current_SC->device->host->host_lock, flags);
- return IRQ_HANDLED;
- }
- current_SC->SCp.phase = in_selection;
-
- outb(0x40 | FIFO_COUNT, port_base + Interrupt_Cntl);
-
- outb(0x82, port_base + SCSI_Cntl); /* Bus Enable + Select */
- outb(adapter_mask | (1 << scmd_id(current_SC)), port_base + SCSI_Data_NoACK);
-
- /* Stop arbitration and enable parity */
- outb(0x10 | PARITY_MASK, port_base + TMC_Cntl);
-#if DEBUG_RACE
- in_interrupt_flag = 0;
-#endif
- return IRQ_HANDLED;
- } else if (current_SC->SCp.phase & in_selection) {
- status = inb(port_base + SCSI_Status);
- if (!(status & 0x01)) {
- /* Try again, for slow devices */
- if (fdomain_select( scmd_id(current_SC) )) {
-#if EVERY_ACCESS
- printk( " SFAIL " );
-#endif
- spin_lock_irqsave(current_SC->device->host->host_lock, flags);
- my_done( DID_NO_CONNECT << 16 );
- spin_unlock_irqrestore(current_SC->device->host->host_lock, flags);
- return IRQ_HANDLED;
- } else {
-#if EVERY_ACCESS
- printk( " AltSel " );
-#endif
- /* Stop arbitration and enable parity */
- outb(0x10 | PARITY_MASK, port_base + TMC_Cntl);
- }
- }
- current_SC->SCp.phase = in_other;
- outb(0x90 | FIFO_COUNT, port_base + Interrupt_Cntl);
- outb(0x80, port_base + SCSI_Cntl);
-#if DEBUG_RACE
- in_interrupt_flag = 0;
-#endif
- return IRQ_HANDLED;
- }
-
- /* current_SC->SCp.phase == in_other: this is the body of the routine */
-
- status = inb(port_base + SCSI_Status);
-
- if (status & 0x10) { /* REQ */
-
- switch (status & 0x0e) {
-
- case 0x08: /* COMMAND OUT */
- outb(current_SC->cmnd[current_SC->SCp.sent_command++],
- port_base + Write_SCSI_Data);
-#if EVERY_ACCESS
- printk( "CMD = %x,",
- current_SC->cmnd[ current_SC->SCp.sent_command - 1] );
-#endif
- break;
- case 0x00: /* DATA OUT -- tmc18c50/tmc18c30 only */
- if (chip != tmc1800 && !current_SC->SCp.have_data_in) {
- current_SC->SCp.have_data_in = -1;
- outb(0xd0 | PARITY_MASK, port_base + TMC_Cntl);
- }
- break;
- case 0x04: /* DATA IN -- tmc18c50/tmc18c30 only */
- if (chip != tmc1800 && !current_SC->SCp.have_data_in) {
- current_SC->SCp.have_data_in = 1;
- outb(0x90 | PARITY_MASK, port_base + TMC_Cntl);
- }
- break;
- case 0x0c: /* STATUS IN */
- current_SC->SCp.Status = inb(port_base + Read_SCSI_Data);
-#if EVERY_ACCESS
- printk( "Status = %x, ", current_SC->SCp.Status );
-#endif
-#if ERRORS_ONLY
- if (current_SC->SCp.Status
- && current_SC->SCp.Status != 2
- && current_SC->SCp.Status != 8) {
- printk( "scsi: <fdomain> target = %d, command = %x, status = %x\n",
- current_SC->device->id,
- current_SC->cmnd[0],
- current_SC->SCp.Status );
- }
-#endif
- break;
- case 0x0a: /* MESSAGE OUT */
- outb(MESSAGE_REJECT, port_base + Write_SCSI_Data); /* Reject */
- break;
- case 0x0e: /* MESSAGE IN */
- current_SC->SCp.Message = inb(port_base + Read_SCSI_Data);
-#if EVERY_ACCESS
- printk( "Message = %x, ", current_SC->SCp.Message );
-#endif
- if (!current_SC->SCp.Message) ++done;
-#if DEBUG_MESSAGES || EVERY_ACCESS
- if (current_SC->SCp.Message) {
- printk( "scsi: <fdomain> message = %x\n",
- current_SC->SCp.Message );
- }
-#endif
- break;
- }
- }
-
- if (chip == tmc1800 && !current_SC->SCp.have_data_in
- && (current_SC->SCp.sent_command >= current_SC->cmd_len)) {
-
- if(current_SC->sc_data_direction == DMA_TO_DEVICE)
- {
- current_SC->SCp.have_data_in = -1;
- outb(0xd0 | PARITY_MASK, port_base + TMC_Cntl);
- }
- else
- {
- current_SC->SCp.have_data_in = 1;
- outb(0x90 | PARITY_MASK, port_base + TMC_Cntl);
- }
- }
-
- if (current_SC->SCp.have_data_in == -1) { /* DATA OUT */
- while ((data_count = FIFO_Size - inw(port_base + FIFO_Data_Count)) > 512) {
-#if EVERY_ACCESS
- printk( "DC=%d, ", data_count ) ;
-#endif
- if (data_count > current_SC->SCp.this_residual)
- data_count = current_SC->SCp.this_residual;
- if (data_count > 0) {
-#if EVERY_ACCESS
- printk( "%d OUT, ", data_count );
-#endif
- if (data_count == 1) {
- outb(*current_SC->SCp.ptr++, port_base + Write_FIFO);
- --current_SC->SCp.this_residual;
- } else {
- data_count >>= 1;
- outsw(port_base + Write_FIFO, current_SC->SCp.ptr, data_count);
- current_SC->SCp.ptr += 2 * data_count;
- current_SC->SCp.this_residual -= 2 * data_count;
- }
- }
- if (!current_SC->SCp.this_residual) {
- if (current_SC->SCp.buffers_residual) {
- --current_SC->SCp.buffers_residual;
- ++current_SC->SCp.buffer;
- current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer);
- current_SC->SCp.this_residual = current_SC->SCp.buffer->length;
- } else
- break;
- }
- }
- }
-
- if (current_SC->SCp.have_data_in == 1) { /* DATA IN */
- while ((data_count = inw(port_base + FIFO_Data_Count)) > 0) {
-#if EVERY_ACCESS
- printk( "DC=%d, ", data_count );
-#endif
- if (data_count > current_SC->SCp.this_residual)
- data_count = current_SC->SCp.this_residual;
- if (data_count) {
-#if EVERY_ACCESS
- printk( "%d IN, ", data_count );
-#endif
- if (data_count == 1) {
- *current_SC->SCp.ptr++ = inb(port_base + Read_FIFO);
- --current_SC->SCp.this_residual;
- } else {
- data_count >>= 1; /* Number of words */
- insw(port_base + Read_FIFO, current_SC->SCp.ptr, data_count);
- current_SC->SCp.ptr += 2 * data_count;
- current_SC->SCp.this_residual -= 2 * data_count;
- }
- }
- if (!current_SC->SCp.this_residual
- && current_SC->SCp.buffers_residual) {
- --current_SC->SCp.buffers_residual;
- ++current_SC->SCp.buffer;
- current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer);
- current_SC->SCp.this_residual = current_SC->SCp.buffer->length;
- }
- }
- }
-
- if (done) {
-#if EVERY_ACCESS
- printk( " ** IN DONE %d ** ", current_SC->SCp.have_data_in );
-#endif
-
-#if ERRORS_ONLY
- if (current_SC->cmnd[0] == REQUEST_SENSE && !current_SC->SCp.Status) {
- char *buf = scsi_sglist(current_SC);
- if ((unsigned char)(*(buf + 2)) & 0x0f) {
- unsigned char key;
- unsigned char code;
- unsigned char qualifier;
-
- key = (unsigned char)(*(buf + 2)) & 0x0f;
- code = (unsigned char)(*(buf + 12));
- qualifier = (unsigned char)(*(buf + 13));
-
- if (key != UNIT_ATTENTION
- && !(key == NOT_READY
- && code == 0x04
- && (!qualifier || qualifier == 0x02 || qualifier == 0x01))
- && !(key == ILLEGAL_REQUEST && (code == 0x25
- || code == 0x24
- || !code)))
-
- printk( "scsi: <fdomain> REQUEST SENSE"
- " Key = %x, Code = %x, Qualifier = %x\n",
- key, code, qualifier );
- }
- }
-#endif
-#if EVERY_ACCESS
- printk( "BEFORE MY_DONE. . ." );
-#endif
- spin_lock_irqsave(current_SC->device->host->host_lock, flags);
- my_done( (current_SC->SCp.Status & 0xff)
- | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16) );
- spin_unlock_irqrestore(current_SC->device->host->host_lock, flags);
-#if EVERY_ACCESS
- printk( "RETURNING.\n" );
-#endif
-
- } else {
- if (current_SC->SCp.phase & disconnect) {
- outb(0xd0 | FIFO_COUNT, port_base + Interrupt_Cntl);
- outb(0x00, port_base + SCSI_Cntl);
- } else {
- outb(0x90 | FIFO_COUNT, port_base + Interrupt_Cntl);
- }
- }
-#if DEBUG_RACE
- in_interrupt_flag = 0;
-#endif
- return IRQ_HANDLED;
-}
-
-static int fdomain_16x0_queue_lck(struct scsi_cmnd *SCpnt,
- void (*done)(struct scsi_cmnd *))
-{
- if (in_command) {
- panic( "scsi: <fdomain> fdomain_16x0_queue() NOT REENTRANT!\n" );
- }
-#if EVERY_ACCESS
- printk( "queue: target = %d cmnd = 0x%02x pieces = %d size = %u\n",
- SCpnt->target,
- *(unsigned char *)SCpnt->cmnd,
- scsi_sg_count(SCpnt),
- scsi_bufflen(SCpnt));
-#endif
-
- fdomain_make_bus_idle();
-
- current_SC = SCpnt; /* Save this for the done function */
- current_SC->scsi_done = done;
-
- /* Initialize static data */
-
- if (scsi_sg_count(current_SC)) {
- current_SC->SCp.buffer = scsi_sglist(current_SC);
- current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer);
- current_SC->SCp.this_residual = current_SC->SCp.buffer->length;
- current_SC->SCp.buffers_residual = scsi_sg_count(current_SC) - 1;
- } else {
- current_SC->SCp.ptr = NULL;
- current_SC->SCp.this_residual = 0;
- current_SC->SCp.buffer = NULL;
- current_SC->SCp.buffers_residual = 0;
- }
-
- current_SC->SCp.Status = 0;
- current_SC->SCp.Message = 0;
- current_SC->SCp.have_data_in = 0;
- current_SC->SCp.sent_command = 0;
- current_SC->SCp.phase = in_arbitration;
-
- /* Start arbitration */
- outb(0x00, port_base + Interrupt_Cntl);
- outb(0x00, port_base + SCSI_Cntl); /* Disable data drivers */
- outb(adapter_mask, port_base + SCSI_Data_NoACK); /* Set our id bit */
- ++in_command;
- outb(0x20, port_base + Interrupt_Cntl);
- outb(0x14 | PARITY_MASK, port_base + TMC_Cntl); /* Start arbitration */
-
- return 0;
-}
-
-static DEF_SCSI_QCMD(fdomain_16x0_queue)
-
-#if DEBUG_ABORT
-static void print_info(struct scsi_cmnd *SCpnt)
-{
- unsigned int imr;
- unsigned int irr;
- unsigned int isr;
-
- if (!SCpnt || !SCpnt->device || !SCpnt->device->host) {
- printk(KERN_WARNING "scsi: <fdomain> Cannot provide detailed information\n");
- return;
- }
-
- printk(KERN_INFO "%s\n", fdomain_16x0_info( SCpnt->device->host ) );
- print_banner(SCpnt->device->host);
- switch (SCpnt->SCp.phase) {
- case in_arbitration: printk("arbitration"); break;
- case in_selection: printk("selection"); break;
- case in_other: printk("other"); break;
- default: printk("unknown"); break;
- }
-
- printk( " (%d), target = %d cmnd = 0x%02x pieces = %d size = %u\n",
- SCpnt->SCp.phase,
- SCpnt->device->id,
- *(unsigned char *)SCpnt->cmnd,
- scsi_sg_count(SCpnt),
- scsi_bufflen(SCpnt));
- printk( "sent_command = %d, have_data_in = %d, timeout = %d\n",
- SCpnt->SCp.sent_command,
- SCpnt->SCp.have_data_in,
- SCpnt->timeout );
-#if DEBUG_RACE
- printk( "in_interrupt_flag = %d\n", in_interrupt_flag );
-#endif
-
- imr = (inb( 0x0a1 ) << 8) + inb( 0x21 );
- outb( 0x0a, 0xa0 );
- irr = inb( 0xa0 ) << 8;
- outb( 0x0a, 0x20 );
- irr += inb( 0x20 );
- outb( 0x0b, 0xa0 );
- isr = inb( 0xa0 ) << 8;
- outb( 0x0b, 0x20 );
- isr += inb( 0x20 );
-
- /* Print out interesting information */
- printk( "IMR = 0x%04x", imr );
- if (imr & (1 << interrupt_level))
- printk( " (masked)" );
- printk( ", IRR = 0x%04x, ISR = 0x%04x\n", irr, isr );
-
- printk( "SCSI Status = 0x%02x\n", inb(port_base + SCSI_Status));
- printk( "TMC Status = 0x%02x", inb(port_base + TMC_Status));
- if (inb((port_base + TMC_Status) & 1))
- printk( " (interrupt)" );
- printk( "\n" );
- printk("Interrupt Status = 0x%02x", inb(port_base + Interrupt_Status));
- if (inb(port_base + Interrupt_Status) & 0x08)
- printk( " (enabled)" );
- printk( "\n" );
- if (chip == tmc18c50 || chip == tmc18c30) {
- printk("FIFO Status = 0x%02x\n", inb(port_base + FIFO_Status));
- printk( "Int. Condition = 0x%02x\n",
- inb( port_base + Interrupt_Cond ) );
- }
- printk( "Configuration 1 = 0x%02x\n", inb( port_base + Configuration1 ) );
- if (chip == tmc18c50 || chip == tmc18c30)
- printk( "Configuration 2 = 0x%02x\n",
- inb( port_base + Configuration2 ) );
-}
-#endif
-
-static int fdomain_16x0_abort(struct scsi_cmnd *SCpnt)
-{
-#if EVERY_ACCESS || ERRORS_ONLY || DEBUG_ABORT
- printk( "scsi: <fdomain> abort " );
-#endif
-
- if (!in_command) {
-#if EVERY_ACCESS || ERRORS_ONLY
- printk( " (not in command)\n" );
-#endif
- return FAILED;
- } else printk( "\n" );
-
-#if DEBUG_ABORT
- print_info( SCpnt );
-#endif
-
- fdomain_make_bus_idle();
- current_SC->SCp.phase |= aborted;
- current_SC->result = DID_ABORT << 16;
-
- /* Aborts are not done well. . . */
- my_done(DID_ABORT << 16);
- return SUCCESS;
-}
-
-int fdomain_16x0_host_reset(struct scsi_cmnd *SCpnt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- outb(1, port_base + SCSI_Cntl);
- do_pause( 2 );
- outb(0, port_base + SCSI_Cntl);
- do_pause( 115 );
- outb(0, port_base + SCSI_Mode_Cntl);
- outb(PARITY_MASK, port_base + TMC_Cntl);
-
- local_irq_restore(flags);
- return SUCCESS;
-}
-
-static int fdomain_16x0_biosparam(struct scsi_device *sdev,
- struct block_device *bdev,
- sector_t capacity, int *info_array)
-{
- int drive;
- int size = capacity;
- unsigned long offset;
- struct drive_info {
- unsigned short cylinders;
- unsigned char heads;
- unsigned char sectors;
- } i;
-
- /* NOTES:
- The RAM area starts at 0x1f00 from the bios_base address.
-
- For BIOS Version 2.0:
-
- The drive parameter table seems to start at 0x1f30.
- The first byte's purpose is not known.
- Next is the cylinder, head, and sector information.
- The last 4 bytes appear to be the drive's size in sectors.
- The other bytes in the drive parameter table are unknown.
- If anyone figures them out, please send me mail, and I will
- update these notes.
-
- Tape drives do not get placed in this table.
-
- There is another table at 0x1fea:
- If the byte is 0x01, then the SCSI ID is not in use.
- If the byte is 0x18 or 0x48, then the SCSI ID is in use,
- although tapes don't seem to be in this table. I haven't
- seen any other numbers (in a limited sample).
-
- 0x1f2d is a drive count (i.e., not including tapes)
-
- The table at 0x1fcc are I/O ports addresses for the various
- operations. I calculate these by hand in this driver code.
-
-
-
- For the ISA-200S version of BIOS Version 2.0:
-
- The drive parameter table starts at 0x1f33.
-
- WARNING: Assume that the table entry is 25 bytes long. Someone needs
- to check this for the Quantum ISA-200S card.
-
-
-
- For BIOS Version 3.2:
-
- The drive parameter table starts at 0x1f70. Each entry is
- 0x0a bytes long. Heads are one less than we need to report.
- */
-
- if (MAJOR(bdev->bd_dev) != SCSI_DISK0_MAJOR) {
- printk("scsi: <fdomain> fdomain_16x0_biosparam: too many disks");
- return 0;
- }
- drive = MINOR(bdev->bd_dev) >> 4;
-
- if (bios_major == 2) {
- switch (Quantum) {
- case 2: /* ISA_200S */
- /* The value of 25 has never been verified.
- It should probably be 15. */
- offset = 0x1f33 + drive * 25;
- break;
- case 3: /* ISA_250MG */
- offset = 0x1f36 + drive * 15;
- break;
- case 4: /* ISA_200S (another one) */
- offset = 0x1f34 + drive * 15;
- break;
- default:
- offset = 0x1f31 + drive * 25;
- break;
- }
- memcpy_fromio( &i, bios_mem + offset, sizeof( struct drive_info ) );
- info_array[0] = i.heads;
- info_array[1] = i.sectors;
- info_array[2] = i.cylinders;
- } else if (bios_major == 3
- && bios_minor >= 0
- && bios_minor < 4) { /* 3.0 and 3.2 BIOS */
- memcpy_fromio( &i, bios_mem + 0x1f71 + drive * 10,
- sizeof( struct drive_info ) );
- info_array[0] = i.heads + 1;
- info_array[1] = i.sectors;
- info_array[2] = i.cylinders;
- } else { /* 3.4 BIOS (and up?) */
- /* This algorithm was provided by Future Domain (much thanks!). */
- unsigned char *p = scsi_bios_ptable(bdev);
-
- if (p && p[65] == 0xaa && p[64] == 0x55 /* Partition table valid */
- && p[4]) { /* Partition type */
-
- /* The partition table layout is as follows:
-
- Start: 0x1b3h
- Offset: 0 = partition status
- 1 = starting head
- 2 = starting sector and cylinder (word, encoded)
- 4 = partition type
- 5 = ending head
- 6 = ending sector and cylinder (word, encoded)
- 8 = starting absolute sector (double word)
- c = number of sectors (double word)
- Signature: 0x1fe = 0x55aa
-
- So, this algorithm assumes:
- 1) the first partition table is in use,
- 2) the data in the first entry is correct, and
- 3) partitions never divide cylinders
-
- Note that (1) may be FALSE for NetBSD (and other BSD flavors),
- as well as for Linux. Note also, that Linux doesn't pay any
- attention to the fields that are used by this algorithm -- it
- only uses the absolute sector data. Recent versions of Linux's
- fdisk(1) will fill this data in correctly, and forthcoming
- versions will check for consistency.
-
- Checking for a non-zero partition type is not part of the
- Future Domain algorithm, but it seemed to be a reasonable thing
- to do, especially in the Linux and BSD worlds. */
-
- info_array[0] = p[5] + 1; /* heads */
- info_array[1] = p[6] & 0x3f; /* sectors */
- } else {
-
- /* Note that this new method guarantees that there will always be
- less than 1024 cylinders on a platter. This is good for drives
- up to approximately 7.85GB (where 1GB = 1024 * 1024 kB). */
-
- if ((unsigned int)size >= 0x7e0000U) {
- info_array[0] = 0xff; /* heads = 255 */
- info_array[1] = 0x3f; /* sectors = 63 */
- } else if ((unsigned int)size >= 0x200000U) {
- info_array[0] = 0x80; /* heads = 128 */
- info_array[1] = 0x3f; /* sectors = 63 */
- } else {
- info_array[0] = 0x40; /* heads = 64 */
- info_array[1] = 0x20; /* sectors = 32 */
- }
- }
- /* For both methods, compute the cylinders */
- info_array[2] = (unsigned int)size / (info_array[0] * info_array[1] );
- kfree(p);
- }
-
- return 0;
-}
-
-static int fdomain_16x0_release(struct Scsi_Host *shpnt)
-{
- if (shpnt->irq)
- free_irq(shpnt->irq, shpnt);
- if (shpnt->io_port && shpnt->n_io_port)
- release_region(shpnt->io_port, shpnt->n_io_port);
- if (PCI_bus)
- pci_dev_put(PCI_dev);
- return 0;
-}
-
-struct scsi_host_template fdomain_driver_template = {
- .module = THIS_MODULE,
- .name = "fdomain",
- .proc_name = "fdomain",
- .detect = fdomain_16x0_detect,
- .info = fdomain_16x0_info,
- .queuecommand = fdomain_16x0_queue,
- .eh_abort_handler = fdomain_16x0_abort,
- .eh_host_reset_handler = fdomain_16x0_host_reset,
- .bios_param = fdomain_16x0_biosparam,
- .release = fdomain_16x0_release,
- .can_queue = 1,
- .this_id = 6,
- .sg_tablesize = 64,
- .use_clustering = DISABLE_CLUSTERING,
-};
-
-#ifndef PCMCIA
-#if defined(CONFIG_PCI) && defined(MODULE)
-
-static struct pci_device_id fdomain_pci_tbl[] = {
- { PCI_VENDOR_ID_FD, PCI_DEVICE_ID_FD_36C70,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
- { }
-};
-MODULE_DEVICE_TABLE(pci, fdomain_pci_tbl);
-#endif
-#define driver_template fdomain_driver_template
-#include "scsi_module.c"
-
-#endif
diff --git a/drivers/scsi/fdomain.h b/drivers/scsi/fdomain.h
deleted file mode 100644
index 5cbe86b573ae..000000000000
--- a/drivers/scsi/fdomain.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * fdomain.c -- Future Domain TMC-16x0 SCSI driver
- * Author: Rickard E. Faith, faith@cs.unc.edu
- * Copyright 1992-1996, 1998 Rickard E. Faith (faith@acm.org)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-extern struct scsi_host_template fdomain_driver_template;
-extern int fdomain_setup(char *str);
-extern struct Scsi_Host *__fdomain_16x0_detect(struct scsi_host_template *tpnt );
-extern int fdomain_16x0_host_reset(struct scsi_cmnd *SCpnt);
diff --git a/drivers/scsi/hisi_sas/Kconfig b/drivers/scsi/hisi_sas/Kconfig
index d42f29a5eb65..57183fce70fb 100644
--- a/drivers/scsi/hisi_sas/Kconfig
+++ b/drivers/scsi/hisi_sas/Kconfig
@@ -1,6 +1,6 @@
config SCSI_HISI_SAS
tristate "HiSilicon SAS"
- depends on HAS_DMA && HAS_IOMEM
+ depends on HAS_IOMEM
depends on ARM64 || COMPILE_TEST
select SCSI_SAS_LIBSAS
select BLK_DEV_INTEGRITY
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index e7fd2877c19c..d1153e8e846b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -175,7 +175,6 @@ struct hisi_sas_device {
struct hisi_sas_dq *dq;
struct list_head list;
u64 attached_phy;
- atomic64_t running_req;
enum sas_device_type dev_type;
int device_id;
int sata_idx;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 2d4dbed03ee3..49c1fa643803 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -33,7 +33,7 @@ u8 hisi_sas_get_ata_protocol(struct host_to_dev_fis *fis, int direction)
case ATA_CMD_FPDMA_RECV:
case ATA_CMD_FPDMA_SEND:
case ATA_CMD_NCQ_NON_DATA:
- return HISI_SAS_SATA_PROTOCOL_FPDMA;
+ return HISI_SAS_SATA_PROTOCOL_FPDMA;
case ATA_CMD_DOWNLOAD_MICRO:
case ATA_CMD_ID_ATA:
@@ -45,7 +45,7 @@ u8 hisi_sas_get_ata_protocol(struct host_to_dev_fis *fis, int direction)
case ATA_CMD_WRITE_LOG_EXT:
case ATA_CMD_PIO_WRITE:
case ATA_CMD_PIO_WRITE_EXT:
- return HISI_SAS_SATA_PROTOCOL_PIO;
+ return HISI_SAS_SATA_PROTOCOL_PIO;
case ATA_CMD_DSM:
case ATA_CMD_DOWNLOAD_MICRO_DMA:
@@ -64,7 +64,7 @@ u8 hisi_sas_get_ata_protocol(struct host_to_dev_fis *fis, int direction)
case ATA_CMD_WRITE_LOG_DMA_EXT:
case ATA_CMD_WRITE_STREAM_DMA_EXT:
case ATA_CMD_ZAC_MGMT_IN:
- return HISI_SAS_SATA_PROTOCOL_DMA;
+ return HISI_SAS_SATA_PROTOCOL_DMA;
case ATA_CMD_CHK_POWER:
case ATA_CMD_DEV_RESET:
@@ -77,21 +77,21 @@ u8 hisi_sas_get_ata_protocol(struct host_to_dev_fis *fis, int direction)
case ATA_CMD_STANDBY:
case ATA_CMD_STANDBYNOW1:
case ATA_CMD_ZAC_MGMT_OUT:
- return HISI_SAS_SATA_PROTOCOL_NONDATA;
+ return HISI_SAS_SATA_PROTOCOL_NONDATA;
default:
{
if (fis->command == ATA_CMD_SET_MAX) {
switch (fis->features) {
case ATA_SET_MAX_PASSWD:
case ATA_SET_MAX_LOCK:
- return HISI_SAS_SATA_PROTOCOL_PIO;
+ return HISI_SAS_SATA_PROTOCOL_PIO;
case ATA_SET_MAX_PASSWD_DMA:
case ATA_SET_MAX_UNLOCK_DMA:
- return HISI_SAS_SATA_PROTOCOL_DMA;
+ return HISI_SAS_SATA_PROTOCOL_DMA;
default:
- return HISI_SAS_SATA_PROTOCOL_NONDATA;
+ return HISI_SAS_SATA_PROTOCOL_NONDATA;
}
}
if (direction == DMA_NONE)
@@ -200,8 +200,6 @@ void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task,
if (task) {
struct device *dev = hisi_hba->dev;
- struct domain_device *device = task->dev;
- struct hisi_sas_device *sas_dev = device->lldd_dev;
if (!task->lldd_task)
return;
@@ -213,9 +211,6 @@ void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task,
dma_unmap_sg(dev, task->scatter,
task->num_scatter,
task->data_dir);
-
- if (sas_dev)
- atomic64_dec(&sas_dev->running_req);
}
if (slot->buf)
@@ -321,7 +316,7 @@ static int hisi_sas_task_prep(struct sas_task *task, struct hisi_sas_dq
*/
if (device->dev_type != SAS_SATA_DEV)
task->task_done(task);
- return SAS_PHY_DOWN;
+ return -ECOMM;
}
if (DEV_IS_GONE(sas_dev)) {
@@ -332,7 +327,7 @@ static int hisi_sas_task_prep(struct sas_task *task, struct hisi_sas_dq
dev_info(dev, "task prep: device %016llx not ready\n",
SAS_ADDR(device->sas_addr));
- return SAS_PHY_DOWN;
+ return -ECOMM;
}
port = to_hisi_sas_port(sas_port);
@@ -342,7 +337,7 @@ static int hisi_sas_task_prep(struct sas_task *task, struct hisi_sas_dq
"SATA/STP" : "SAS",
device->port->id);
- return SAS_PHY_DOWN;
+ return -ECOMM;
}
if (!sas_protocol_ata(task->task_proto)) {
@@ -431,8 +426,6 @@ static int hisi_sas_task_prep(struct sas_task *task, struct hisi_sas_dq
spin_unlock_irqrestore(&task->task_state_lock, flags);
dq->slot_prep = slot;
-
- atomic64_inc(&sas_dev->running_req);
++(*pass);
return 0;
@@ -683,6 +676,8 @@ static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
phy->hisi_hba = hisi_hba;
phy->port = NULL;
+ phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ phy->maximum_linkrate = hisi_hba->hw->phy_get_max_linkrate();
sas_phy->enabled = (phy_no < hisi_hba->n_phy) ? 1 : 0;
sas_phy->class = SAS;
sas_phy->iproto = SAS_PROTOCOL_ALL;
@@ -869,6 +864,7 @@ static void hisi_sas_tmf_timedout(struct timer_list *t)
#define TASK_TIMEOUT 20
#define TASK_RETRY 3
+#define INTERNAL_ABORT_TIMEOUT 6
static int hisi_sas_exec_internal_tmf_task(struct domain_device *device,
void *parameter, u32 para_len,
struct hisi_sas_tmf_task *tmf)
@@ -1514,8 +1510,6 @@ hisi_sas_internal_abort_task_exec(struct hisi_hba *hisi_hba, int device_id,
dq->slot_prep = slot;
- atomic64_inc(&sas_dev->running_req);
-
/* send abort command to the chip */
hisi_hba->hw->start_delivery(dq);
spin_unlock_irqrestore(&dq->lock, flags_dq);
@@ -1572,7 +1566,7 @@ hisi_sas_internal_task_abort(struct hisi_hba *hisi_hba,
task->task_proto = device->tproto;
task->task_done = hisi_sas_task_done;
task->slow_task->timer.function = hisi_sas_tmf_timedout;
- task->slow_task->timer.expires = jiffies + msecs_to_jiffies(110);
+ task->slow_task->timer.expires = jiffies + INTERNAL_ABORT_TIMEOUT*HZ;
add_timer(&task->slow_task->timer);
res = hisi_sas_internal_abort_task_exec(hisi_hba, sas_dev->device_id,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 679e76f58a0a..84a0ccc4daf5 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -651,8 +651,10 @@ static int reset_hw_v1_hw(struct hisi_hba *hisi_hba)
dev_err(dev, "De-reset failed\n");
return -EIO;
}
- } else
+ } else {
dev_warn(dev, "no reset method\n");
+ return -EINVAL;
+ }
return 0;
}
@@ -873,7 +875,6 @@ static void phy_set_linkrate_v1_hw(struct hisi_hba *hisi_hba, int phy_no,
sas_phy->phy->maximum_linkrate = max;
sas_phy->phy->minimum_linkrate = min;
- min -= SAS_LINK_RATE_1_5_GBPS;
max -= SAS_LINK_RATE_1_5_GBPS;
for (i = 0; i <= max; i++)
@@ -882,10 +883,11 @@ static void phy_set_linkrate_v1_hw(struct hisi_hba *hisi_hba, int phy_no,
prog_phy_link_rate &= ~0xff;
prog_phy_link_rate |= rate_mask;
+ disable_phy_v1_hw(hisi_hba, phy_no);
+ msleep(100);
hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
prog_phy_link_rate);
-
- phy_hard_reset_v1_hw(hisi_hba, phy_no);
+ start_phy_v1_hw(hisi_hba, phy_no);
}
static int get_wideport_bitmap_v1_hw(struct hisi_hba *hisi_hba, int port_id)
@@ -1407,9 +1409,6 @@ static int slot_complete_v1_hw(struct hisi_hba *hisi_hba,
}
out:
- if (sas_dev)
- atomic64_dec(&sas_dev->running_req);
-
hisi_sas_slot_task_free(hisi_hba, task, slot);
sts = ts->stat;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 4ccb61e2ae5c..f89fb9a49ea9 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -406,6 +406,17 @@ struct hisi_sas_err_record_v2 {
__le32 dma_rx_err_type;
};
+struct signal_attenuation_s {
+ u32 de_emphasis;
+ u32 preshoot;
+ u32 boost;
+};
+
+struct sig_atten_lu_s {
+ const struct signal_attenuation_s *att;
+ u32 sas_phy_ctrl;
+};
+
static const struct hisi_sas_hw_error one_bit_ecc_errors[] = {
{
.irq_msk = BIT(SAS_ECC_INTR_DQE_ECC_1B_OFF),
@@ -1084,8 +1095,10 @@ static int reset_hw_v2_hw(struct hisi_hba *hisi_hba)
dev_err(dev, "SAS de-reset fail.\n");
return -EIO;
}
- } else
- dev_warn(dev, "no reset method\n");
+ } else {
+ dev_err(dev, "no reset method\n");
+ return -EINVAL;
+ }
return 0;
}
@@ -1130,9 +1143,16 @@ static void phys_try_accept_stp_links_v2_hw(struct hisi_hba *hisi_hba)
}
}
+static const struct signal_attenuation_s x6000 = {9200, 0, 10476};
+static const struct sig_atten_lu_s sig_atten_lu[] = {
+ { &x6000, 0x3016a68 },
+};
+
static void init_reg_v2_hw(struct hisi_hba *hisi_hba)
{
struct device *dev = hisi_hba->dev;
+ u32 sas_phy_ctrl = 0x30b9908;
+ u32 signal[3];
int i;
/* Global registers init */
@@ -1176,9 +1196,28 @@ static void init_reg_v2_hw(struct hisi_hba *hisi_hba)
hisi_sas_write32(hisi_hba, AXI_AHB_CLK_CFG, 1);
hisi_sas_write32(hisi_hba, HYPER_STREAM_ID_EN_CFG, 1);
+ /* Get sas_phy_ctrl value to deal with TX FFE issue. */
+ if (!device_property_read_u32_array(dev, "hisilicon,signal-attenuation",
+ signal, ARRAY_SIZE(signal))) {
+ for (i = 0; i < ARRAY_SIZE(sig_atten_lu); i++) {
+ const struct sig_atten_lu_s *lookup = &sig_atten_lu[i];
+ const struct signal_attenuation_s *att = lookup->att;
+
+ if ((signal[0] == att->de_emphasis) &&
+ (signal[1] == att->preshoot) &&
+ (signal[2] == att->boost)) {
+ sas_phy_ctrl = lookup->sas_phy_ctrl;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(sig_atten_lu))
+ dev_warn(dev, "unknown signal attenuation values, using default PHY ctrl config\n");
+ }
+
for (i = 0; i < hisi_hba->n_phy; i++) {
hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x855);
- hisi_sas_phy_write32(hisi_hba, i, SAS_PHY_CTRL, 0x30b9908);
+ hisi_sas_phy_write32(hisi_hba, i, SAS_PHY_CTRL, sas_phy_ctrl);
hisi_sas_phy_write32(hisi_hba, i, SL_TOUT_CFG, 0x7d7d7d7d);
hisi_sas_phy_write32(hisi_hba, i, SL_CONTROL, 0x0);
hisi_sas_phy_write32(hisi_hba, i, TXID_AUTO, 0x2);
@@ -1566,7 +1605,6 @@ static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no,
sas_phy->phy->maximum_linkrate = max;
sas_phy->phy->minimum_linkrate = min;
- min -= SAS_LINK_RATE_1_5_GBPS;
max -= SAS_LINK_RATE_1_5_GBPS;
for (i = 0; i <= max; i++)
@@ -1575,10 +1613,11 @@ static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no,
prog_phy_link_rate &= ~0xff;
prog_phy_link_rate |= rate_mask;
+ disable_phy_v2_hw(hisi_hba, phy_no);
+ msleep(100);
hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
prog_phy_link_rate);
-
- phy_hard_reset_v2_hw(hisi_hba, phy_no);
+ start_phy_v2_hw(hisi_hba, phy_no);
}
static int get_wideport_bitmap_v2_hw(struct hisi_hba *hisi_hba, int port_id)
@@ -2371,7 +2410,7 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot)
spin_lock_irqsave(&hisi_hba->lock, flags);
hisi_sas_slot_task_free(hisi_hba, task, slot);
spin_unlock_irqrestore(&hisi_hba->lock, flags);
- return -1;
+ return ts->stat;
}
if (unlikely(!sas_dev)) {
@@ -2630,7 +2669,7 @@ static int prep_abort_v2_hw(struct hisi_hba *hisi_hba,
/* dw0 */
hdr->dw0 = cpu_to_le32((5 << CMD_HDR_CMD_OFF) | /*abort*/
(port->id << CMD_HDR_PORT_OFF) |
- ((dev_is_sata(dev) ? 1:0) <<
+ (dev_is_sata(dev) <<
CMD_HDR_ABORT_DEVICE_TYPE_OFF) |
(abort_flag << CMD_HDR_ABORT_FLAG_OFF));
@@ -2647,7 +2686,7 @@ static int prep_abort_v2_hw(struct hisi_hba *hisi_hba,
static int phy_up_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
{
int i, res = IRQ_HANDLED;
- u32 port_id, link_rate, hard_phy_linkrate;
+ u32 port_id, link_rate;
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
struct asd_sas_phy *sas_phy = &phy->sas_phy;
struct device *dev = hisi_hba->dev;
@@ -2686,11 +2725,6 @@ static int phy_up_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
}
sas_phy->linkrate = link_rate;
- hard_phy_linkrate = hisi_sas_phy_read32(hisi_hba, phy_no,
- HARD_PHY_LINKRATE);
- phy->maximum_linkrate = hard_phy_linkrate & 0xf;
- phy->minimum_linkrate = (hard_phy_linkrate >> 4) & 0xf;
-
sas_phy->oob_mode = SAS_OOB_MODE;
memcpy(sas_phy->attached_sas_addr, &id->sas_addr, SAS_ADDR_SIZE);
dev_info(dev, "phyup: phy%d link_rate=%d\n", phy_no, link_rate);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index a1f18689729a..6f3e5ba6b472 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -172,6 +172,7 @@
#define CHL_INT1_MSK (PORT_BASE + 0x1c4)
#define CHL_INT2_MSK (PORT_BASE + 0x1c8)
#define CHL_INT_COAL_EN (PORT_BASE + 0x1d0)
+#define SAS_RX_TRAIN_TIMER (PORT_BASE + 0x2a4)
#define PHY_CTRL_RDY_MSK (PORT_BASE + 0x2b0)
#define PHYCTRL_NOT_RDY_MSK (PORT_BASE + 0x2b4)
#define PHYCTRL_DWS_RESET_MSK (PORT_BASE + 0x2b8)
@@ -184,6 +185,8 @@
#define DMA_RX_STATUS (PORT_BASE + 0x2e8)
#define DMA_RX_STATUS_BUSY_OFF 0
#define DMA_RX_STATUS_BUSY_MSK (0x1 << DMA_RX_STATUS_BUSY_OFF)
+
+#define COARSETUNE_TIME (PORT_BASE + 0x304)
#define ERR_CNT_DWS_LOST (PORT_BASE + 0x380)
#define ERR_CNT_RESET_PROB (PORT_BASE + 0x384)
#define ERR_CNT_INVLD_DW (PORT_BASE + 0x390)
@@ -340,12 +343,6 @@ struct hisi_sas_err_record_v3 {
#define HISI_SAS_COMMAND_ENTRIES_V3_HW 4096
#define HISI_SAS_MSI_COUNT_V3_HW 32
-enum {
- HISI_SAS_PHY_PHY_UPDOWN,
- HISI_SAS_PHY_CHNL_INT,
- HISI_SAS_PHY_INT_NR
-};
-
#define DIR_NO_DATA 0
#define DIR_TO_INI 1
#define DIR_TO_DEVICE 2
@@ -423,10 +420,10 @@ static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK+0x4*i, 0);
hisi_sas_write32(hisi_hba, HYPER_STREAM_ID_EN_CFG, 1);
- hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE, 0x30000);
for (i = 0; i < hisi_hba->n_phy; i++) {
- hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x801);
+ hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x855);
+ hisi_sas_phy_write32(hisi_hba, i, SAS_RX_TRAIN_TIMER, 0x13e80);
hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, 0xffffffff);
hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff);
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, 0xffffffff);
@@ -438,17 +435,13 @@ static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_DWS_RESET_MSK, 0x0);
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_PHY_ENA_MSK, 0x0);
hisi_sas_phy_write32(hisi_hba, i, SL_RX_BCAST_CHK_MSK, 0x0);
- hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_OOB_RESTART_MSK, 0x0);
- hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, 0x199b4fa);
- hisi_sas_phy_write32(hisi_hba, i, SAS_SSP_CON_TIMER_CFG,
- 0xa03e8);
- hisi_sas_phy_write32(hisi_hba, i, SAS_STP_CON_TIMER_CFG,
- 0xa03e8);
- hisi_sas_phy_write32(hisi_hba, i, STP_LINK_TIMER,
- 0x7f7a120);
- hisi_sas_phy_write32(hisi_hba, i, CON_CFG_DRIVER,
- 0x2a0a80);
+ hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_OOB_RESTART_MSK, 0x1);
+ hisi_sas_phy_write32(hisi_hba, i, STP_LINK_TIMER, 0x7f7a120);
+
+ /* used for 12G negotiate */
+ hisi_sas_phy_write32(hisi_hba, i, COARSETUNE_TIME, 0x1e);
}
+
for (i = 0; i < hisi_hba->queue_count; i++) {
/* Delivery queue */
hisi_sas_write32(hisi_hba,
@@ -676,8 +669,10 @@ static int reset_hw_v3_hw(struct hisi_hba *hisi_hba)
dev_err(dev, "Reset failed\n");
return -EIO;
}
- } else
+ } else {
dev_err(dev, "no reset method!\n");
+ return -EINVAL;
+ }
return 0;
}
@@ -737,7 +732,7 @@ static void phy_hard_reset_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
start_phy_v3_hw(hisi_hba, phy_no);
}
-enum sas_linkrate phy_get_max_linkrate_v3_hw(void)
+static enum sas_linkrate phy_get_max_linkrate_v3_hw(void)
{
return SAS_LINK_RATE_12_0_GBPS;
}
@@ -1102,7 +1097,7 @@ static int prep_abort_v3_hw(struct hisi_hba *hisi_hba,
/* dw0 */
hdr->dw0 = cpu_to_le32((5 << CMD_HDR_CMD_OFF) | /*abort*/
(port->id << CMD_HDR_PORT_OFF) |
- ((dev_is_sata(dev) ? 1:0)
+ (dev_is_sata(dev)
<< CMD_HDR_ABORT_DEVICE_TYPE_OFF) |
(abort_flag
<< CMD_HDR_ABORT_FLAG_OFF));
@@ -1118,10 +1113,10 @@ static int prep_abort_v3_hw(struct hisi_hba *hisi_hba,
return 0;
}
-static int phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
+static irqreturn_t phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
{
- int i, res = 0;
- u32 context, port_id, link_rate, hard_phy_linkrate;
+ int i, res;
+ u32 context, port_id, link_rate;
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
struct asd_sas_phy *sas_phy = &phy->sas_phy;
struct device *dev = hisi_hba->dev;
@@ -1139,10 +1134,6 @@ static int phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
goto end;
}
sas_phy->linkrate = link_rate;
- hard_phy_linkrate = hisi_sas_phy_read32(hisi_hba, phy_no,
- HARD_PHY_LINKRATE);
- phy->maximum_linkrate = hard_phy_linkrate & 0xf;
- phy->minimum_linkrate = (hard_phy_linkrate >> 4) & 0xf;
phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
/* Check for SATA dev */
@@ -1196,7 +1187,7 @@ static int phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
phy->port_id = port_id;
phy->phy_attached = 1;
hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
-
+ res = IRQ_HANDLED;
end:
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
CHL_INT0_SL_PHY_ENABLE_MSK);
@@ -1205,7 +1196,7 @@ end:
return res;
}
-static int phy_down_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
+static irqreturn_t phy_down_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
{
u32 phy_state, sl_ctrl, txid_auto;
struct device *dev = hisi_hba->dev;
@@ -1227,10 +1218,10 @@ static int phy_down_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, CHL_INT0_NOT_RDY_MSK);
hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 0);
- return 0;
+ return IRQ_HANDLED;
}
-static void phy_bcast_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
+static irqreturn_t phy_bcast_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
{
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
struct asd_sas_phy *sas_phy = &phy->sas_phy;
@@ -1241,6 +1232,8 @@ static void phy_bcast_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
CHL_INT0_SL_RX_BCST_ACK_MSK);
hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 0);
+
+ return IRQ_HANDLED;
}
static irqreturn_t int_phy_up_down_bcast_v3_hw(int irq_no, void *p)
@@ -1267,7 +1260,9 @@ static irqreturn_t int_phy_up_down_bcast_v3_hw(int irq_no, void *p)
res = IRQ_HANDLED;
if (irq_value & CHL_INT0_SL_RX_BCST_ACK_MSK)
/* phy bcast */
- phy_bcast_v3_hw(phy_no, hisi_hba);
+ if (phy_bcast_v3_hw(phy_no, hisi_hba)
+ == IRQ_HANDLED)
+ res = IRQ_HANDLED;
} else {
if (irq_value & CHL_INT0_NOT_RDY_MSK)
/* phy down */
@@ -1583,7 +1578,7 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot)
spin_lock_irqsave(&hisi_hba->lock, flags);
hisi_sas_slot_task_free(hisi_hba, task, slot);
spin_unlock_irqrestore(&hisi_hba->lock, flags);
- return -1;
+ return ts->stat;
}
if (unlikely(!sas_dev)) {
@@ -1864,7 +1859,6 @@ static void phy_set_linkrate_v3_hw(struct hisi_hba *hisi_hba, int phy_no,
sas_phy->phy->maximum_linkrate = max;
sas_phy->phy->minimum_linkrate = min;
- min -= SAS_LINK_RATE_1_5_GBPS;
max -= SAS_LINK_RATE_1_5_GBPS;
for (i = 0; i <= max; i++)
@@ -1873,10 +1867,11 @@ static void phy_set_linkrate_v3_hw(struct hisi_hba *hisi_hba, int phy_no,
prog_phy_link_rate &= ~0xff;
prog_phy_link_rate |= rate_mask;
+ disable_phy_v3_hw(hisi_hba, phy_no);
+ msleep(100);
hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
prog_phy_link_rate);
-
- phy_hard_reset_v3_hw(hisi_hba, phy_no);
+ start_phy_v3_hw(hisi_hba, phy_no);
}
static void interrupt_disable_v3_hw(struct hisi_hba *hisi_hba)
@@ -2399,6 +2394,7 @@ static const struct pci_device_id sas_v3_pci_table[] = {
{ PCI_VDEVICE(HUAWEI, 0xa230), hip08 },
{}
};
+MODULE_DEVICE_TABLE(pci, sas_v3_pci_table);
static const struct pci_error_handlers hisi_sas_err_handler = {
.error_detected = hisi_sas_error_detected_v3_hw,
@@ -2421,4 +2417,4 @@ module_pci_driver(sas_v3_pci_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
MODULE_DESCRIPTION("HISILICON SAS controller v3 hw driver based on pci device");
-MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_ALIAS("pci:" DRV_NAME);
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index ef22b275d050..7649d63a1b8d 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -42,6 +42,12 @@
#include "scsi_logging.h"
+static int shost_eh_deadline = -1;
+
+module_param_named(eh_deadline, shost_eh_deadline, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(eh_deadline,
+ "SCSI EH timeout in seconds (should be between 0 and 2^31-1)");
+
static DEFINE_IDA(host_index_ida);
@@ -148,7 +154,6 @@ int scsi_host_set_state(struct Scsi_Host *shost, enum scsi_host_state state)
scsi_host_state_name(state)));
return -EINVAL;
}
-EXPORT_SYMBOL(scsi_host_set_state);
/**
* scsi_remove_host - remove a scsi host
@@ -356,12 +361,6 @@ static void scsi_host_dev_release(struct device *dev)
kfree(shost);
}
-static int shost_eh_deadline = -1;
-
-module_param_named(eh_deadline, shost_eh_deadline, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(eh_deadline,
- "SCSI EH timeout in seconds (should be between 0 and 2^31-1)");
-
static struct device_type scsi_host_type = {
.name = "scsi_host",
.release = scsi_host_dev_release,
@@ -517,29 +516,6 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize)
}
EXPORT_SYMBOL(scsi_host_alloc);
-struct Scsi_Host *scsi_register(struct scsi_host_template *sht, int privsize)
-{
- struct Scsi_Host *shost = scsi_host_alloc(sht, privsize);
-
- if (!sht->detect) {
- printk(KERN_WARNING "scsi_register() called on new-style "
- "template for driver %s\n", sht->name);
- dump_stack();
- }
-
- if (shost)
- list_add_tail(&shost->sht_legacy_list, &sht->legacy_hosts);
- return shost;
-}
-EXPORT_SYMBOL(scsi_register);
-
-void scsi_unregister(struct Scsi_Host *shost)
-{
- list_del(&shost->sht_legacy_list);
- scsi_host_put(shost);
-}
-EXPORT_SYMBOL(scsi_unregister);
-
static int __scsi_host_match(struct device *dev, const void *data)
{
struct Scsi_Host *p;
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index e07dd990e585..dda1a64ab89c 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -3816,10 +3816,8 @@ static struct device_attribute ipr_iopoll_weight_attr = {
**/
static struct ipr_sglist *ipr_alloc_ucode_buffer(int buf_len)
{
- int sg_size, order, bsize_elem, num_elem, i, j;
+ int sg_size, order;
struct ipr_sglist *sglist;
- struct scatterlist *scatterlist;
- struct page *page;
/* Get the minimum size per scatter/gather element */
sg_size = buf_len / (IPR_MAX_SGLIST - 1);
@@ -3827,45 +3825,18 @@ static struct ipr_sglist *ipr_alloc_ucode_buffer(int buf_len)
/* Get the actual size per element */
order = get_order(sg_size);
- /* Determine the actual number of bytes per element */
- bsize_elem = PAGE_SIZE * (1 << order);
-
- /* Determine the actual number of sg entries needed */
- if (buf_len % bsize_elem)
- num_elem = (buf_len / bsize_elem) + 1;
- else
- num_elem = buf_len / bsize_elem;
-
/* Allocate a scatter/gather list for the DMA */
- sglist = kzalloc(sizeof(struct ipr_sglist) +
- (sizeof(struct scatterlist) * (num_elem - 1)),
- GFP_KERNEL);
-
+ sglist = kzalloc(sizeof(struct ipr_sglist), GFP_KERNEL);
if (sglist == NULL) {
ipr_trace;
return NULL;
}
-
- scatterlist = sglist->scatterlist;
- sg_init_table(scatterlist, num_elem);
-
sglist->order = order;
- sglist->num_sg = num_elem;
-
- /* Allocate a bunch of sg elements */
- for (i = 0; i < num_elem; i++) {
- page = alloc_pages(GFP_KERNEL, order);
- if (!page) {
- ipr_trace;
-
- /* Free up what we already allocated */
- for (j = i - 1; j >= 0; j--)
- __free_pages(sg_page(&scatterlist[j]), order);
- kfree(sglist);
- return NULL;
- }
-
- sg_set_page(&scatterlist[i], page, 0, 0);
+ sglist->scatterlist = sgl_alloc_order(buf_len, order, false, GFP_KERNEL,
+ &sglist->num_sg);
+ if (!sglist->scatterlist) {
+ kfree(sglist);
+ return NULL;
}
return sglist;
@@ -3883,11 +3854,7 @@ static struct ipr_sglist *ipr_alloc_ucode_buffer(int buf_len)
**/
static void ipr_free_ucode_buffer(struct ipr_sglist *sglist)
{
- int i;
-
- for (i = 0; i < sglist->num_sg; i++)
- __free_pages(sg_page(&sglist->scatterlist[i]), sglist->order);
-
+ sgl_free_order(sglist->scatterlist, sglist->order);
kfree(sglist);
}
@@ -9684,14 +9651,14 @@ static int ipr_alloc_cmd_blks(struct ipr_ioa_cfg *ioa_cfg)
}
for (i = 0; i < IPR_NUM_CMD_BLKS; i++) {
- ipr_cmd = dma_pool_alloc(ioa_cfg->ipr_cmd_pool, GFP_KERNEL, &dma_addr);
+ ipr_cmd = dma_pool_zalloc(ioa_cfg->ipr_cmd_pool,
+ GFP_KERNEL, &dma_addr);
if (!ipr_cmd) {
ipr_free_cmd_blks(ioa_cfg);
return -ENOMEM;
}
- memset(ipr_cmd, 0, sizeof(*ipr_cmd));
ioa_cfg->ipr_cmnd_list[i] = ipr_cmd;
ioa_cfg->ipr_cmnd_list_dma[i] = dma_addr;
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index c7f0e9e3cd7d..93570734cbfb 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -1454,7 +1454,7 @@ struct ipr_sglist {
u32 num_sg;
u32 num_dma_sg;
u32 buffer_len;
- struct scatterlist scatterlist[1];
+ struct scatterlist *scatterlist;
};
enum ipr_sdt_state {
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 67621308eb9c..e3c8857741a1 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -224,8 +224,6 @@ module_param(ips, charp, 0);
/*
* Function prototypes
*/
-static int ips_detect(struct scsi_host_template *);
-static int ips_release(struct Scsi_Host *);
static int ips_eh_abort(struct scsi_cmnd *);
static int ips_eh_reset(struct scsi_cmnd *);
static int ips_queue(struct Scsi_Host *, struct scsi_cmnd *);
@@ -355,8 +353,6 @@ static dma_addr_t ips_flashbusaddr;
static long ips_FlashDataInUse; /* CD Boot - Flash Data In Use Flag */
static uint32_t MaxLiteCmds = 32; /* Max Active Cmds for a Lite Adapter */
static struct scsi_host_template ips_driver_template = {
- .detect = ips_detect,
- .release = ips_release,
.info = ips_info,
.queuecommand = ips_queue,
.eh_abort_handler = ips_eh_abort,
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 13b37cdffa8e..1ee3868ade07 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -2766,7 +2766,7 @@ static int sci_write_gpio_tx_gp(struct isci_host *ihost, u8 reg_index, u8 reg_co
int i;
for (i = 0; i < 3; i++) {
- int bit = (i << 2) + 2;
+ int bit;
bit = try_test_sas_gpio_gp_bit(to_sas_gpio_od(d, i),
write_data, reg_index,
diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c
index 9aaa74e349cc..6eb5ff3e2e61 100644
--- a/drivers/scsi/jazz_esp.c
+++ b/drivers/scsi/jazz_esp.c
@@ -147,7 +147,7 @@ static int esp_jazz_probe(struct platform_device *dev)
esp = shost_priv(host);
esp->host = host;
- esp->dev = dev;
+ esp->dev = &dev->dev;
esp->ops = &jazz_esp_ops;
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c
index 8660f923ace0..3f3569ec5ce3 100644
--- a/drivers/scsi/libfc/fc_disc.c
+++ b/drivers/scsi/libfc/fc_disc.c
@@ -731,7 +731,7 @@ static void fc_disc_stop_final(struct fc_lport *lport)
*/
void fc_disc_config(struct fc_lport *lport, void *priv)
{
- struct fc_disc *disc = &lport->disc;
+ struct fc_disc *disc;
if (!lport->tt.disc_start)
lport->tt.disc_start = fc_disc_start;
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 2b3637b40dde..0cc1567eacc1 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -709,7 +709,7 @@ void sas_resume_sata(struct asd_sas_port *port)
}
/**
- * sas_discover_sata -- discover an STP/SATA domain device
+ * sas_discover_sata - discover an STP/SATA domain device
* @dev: pointer to struct domain_device of interest
*
* Devices directly attached to a HA port, have no parents. All other
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index e4fd078e4175..a0fa7ef3a071 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -55,7 +55,7 @@ void sas_init_dev(struct domain_device *dev)
/* ---------- Domain device discovery ---------- */
/**
- * sas_get_port_device -- Discover devices which caused port creation
+ * sas_get_port_device - Discover devices which caused port creation
* @port: pointer to struct sas_port of interest
*
* Devices directly attached to a HA port, have no parent. This is
@@ -278,8 +278,8 @@ static void sas_resume_devices(struct work_struct *work)
}
/**
- * sas_discover_end_dev -- discover an end device (SSP, etc)
- * @end: pointer to domain device of interest
+ * sas_discover_end_dev - discover an end device (SSP, etc)
+ * @dev: pointer to domain device of interest
*
* See comment in sas_discover_sata().
*/
@@ -428,8 +428,8 @@ void sas_device_set_phy(struct domain_device *dev, struct sas_port *port)
/* ---------- Discovery and Revalidation ---------- */
/**
- * sas_discover_domain -- discover the domain
- * @port: port to the domain of interest
+ * sas_discover_domain - discover the domain
+ * @work: work structure embedded in port domain device.
*
* NOTE: this process _must_ quit (return) as soon as any connection
* errors are encountered. Connection recovery is done elsewhere.
@@ -572,7 +572,8 @@ int sas_discover_event(struct asd_sas_port *port, enum discover_event ev)
}
/**
- * sas_init_disc -- initialize the discovery struct in the port
+ * sas_init_disc - initialize the discovery struct in the port
+ * @disc: port discovery structure
* @port: pointer to struct port
*
* Called when the ports are being initialized.
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 6a4f8198b78e..8b7114348def 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1170,9 +1170,9 @@ static int sas_check_level_subtractive_boundary(struct domain_device *dev)
return 0;
}
/**
- * sas_ex_discover_devices -- discover devices attached to this expander
- * dev: pointer to the expander domain device
- * single: if you want to do a single phy, else set to -1;
+ * sas_ex_discover_devices - discover devices attached to this expander
+ * @dev: pointer to the expander domain device
+ * @single: if you want to do a single phy, else set to -1;
*
* Configure this expander for use with its devices and register the
* devices of this expander.
@@ -1528,10 +1528,11 @@ static int sas_configure_phy(struct domain_device *dev, int phy_id,
}
/**
- * sas_configure_parent -- configure routing table of parent
- * parent: parent expander
- * child: child expander
- * sas_addr: SAS port identifier of device directly attached to child
+ * sas_configure_parent - configure routing table of parent
+ * @parent: parent expander
+ * @child: child expander
+ * @sas_addr: SAS port identifier of device directly attached to child
+ * @include: whether or not to include @child in the expander routing table
*/
static int sas_configure_parent(struct domain_device *parent,
struct domain_device *child,
@@ -1570,9 +1571,9 @@ static int sas_configure_parent(struct domain_device *parent,
}
/**
- * sas_configure_routing -- configure routing
- * dev: expander device
- * sas_addr: port identifier of device directly attached to the expander device
+ * sas_configure_routing - configure routing
+ * @dev: expander device
+ * @sas_addr: port identifier of device directly attached to the expander device
*/
static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr)
{
@@ -1589,8 +1590,8 @@ static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr)
}
/**
- * sas_discover_expander -- expander discovery
- * @ex: pointer to expander domain device
+ * sas_discover_expander - expander discovery
+ * @dev: pointer to expander domain device
*
* See comment in sas_discover_sata().
*/
@@ -2111,8 +2112,8 @@ static int sas_rediscover(struct domain_device *dev, const int phy_id)
}
/**
- * sas_revalidate_domain -- revalidate the domain
- * @port: port to the domain of interest
+ * sas_ex_revalidate_domain - revalidate the domain
+ * @port_dev: port domain device.
*
* NOTE: this process _must_ quit (return) as soon as any connection
* errors are encountered. Connection recovery is done elsewhere.
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index c81a63b5dc71..ede0af78144f 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -234,7 +234,7 @@ int sas_try_ata_reset(struct asd_sas_phy *asd_phy)
return -ENODEV;
}
-/**
+/*
* transport_sas_phy_reset - reset a phy and permit libata to manage the link
*
* phy reset request via sysfs in host workqueue context so we know we
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index f07e55d3aa73..fad23dd39114 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -84,7 +84,7 @@ static void sas_resume_port(struct asd_sas_phy *phy)
}
/**
- * sas_form_port -- add this phy to a port
+ * sas_form_port - add this phy to a port
* @phy: the phy of interest
*
* This function adds this phy to an existing port, thus creating a wide
@@ -197,8 +197,9 @@ static void sas_form_port(struct asd_sas_phy *phy)
}
/**
- * sas_deform_port -- remove this phy from the port it belongs to
+ * sas_deform_port - remove this phy from the port it belongs to
* @phy: the phy of interest
+ * @gone: whether or not the PHY is gone
*
* This is called when the physical link to the other phy has been
* lost (on this phy), in Event thread context. We cannot delay here.
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 61fb46da05d4..6c0d351c0d0d 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -544,16 +544,10 @@ struct unsol_rcv_ct_ctx {
#define LPFC_USER_LINK_SPEED_10G 10 /* 10 Gigabaud */
#define LPFC_USER_LINK_SPEED_16G 16 /* 16 Gigabaud */
#define LPFC_USER_LINK_SPEED_32G 32 /* 32 Gigabaud */
-#define LPFC_USER_LINK_SPEED_MAX LPFC_USER_LINK_SPEED_32G
-#define LPFC_USER_LINK_SPEED_BITMAP ((1ULL << LPFC_USER_LINK_SPEED_32G) | \
- (1 << LPFC_USER_LINK_SPEED_16G) | \
- (1 << LPFC_USER_LINK_SPEED_10G) | \
- (1 << LPFC_USER_LINK_SPEED_8G) | \
- (1 << LPFC_USER_LINK_SPEED_4G) | \
- (1 << LPFC_USER_LINK_SPEED_2G) | \
- (1 << LPFC_USER_LINK_SPEED_1G) | \
- (1 << LPFC_USER_LINK_SPEED_AUTO))
-#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16, 32"
+#define LPFC_USER_LINK_SPEED_64G 64 /* 64 Gigabaud */
+#define LPFC_USER_LINK_SPEED_MAX LPFC_USER_LINK_SPEED_64G
+
+#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16, 32, 64"
enum nemb_type {
nemb_mse = 1,
@@ -760,6 +754,7 @@ struct lpfc_hba {
uint8_t mds_diags_support;
uint32_t initial_imax;
uint8_t bbcredit_support;
+ uint8_t enab_exp_wqcq_pages;
/* HBA Config Parameters */
uint32_t cfg_ack0;
@@ -787,6 +782,7 @@ struct lpfc_hba {
uint32_t cfg_fcp_io_channel;
uint32_t cfg_suppress_rsp;
uint32_t cfg_nvme_oas;
+ uint32_t cfg_nvme_embed_cmd;
uint32_t cfg_nvme_io_channel;
uint32_t cfg_nvmet_mrq;
uint32_t cfg_enable_nvmet;
@@ -839,11 +835,14 @@ struct lpfc_hba {
uint32_t cfg_enable_SmartSAN;
uint32_t cfg_enable_mds_diags;
uint32_t cfg_enable_fc4_type;
- uint32_t cfg_enable_bbcr; /*Enable BB Credit Recovery*/
+ uint32_t cfg_enable_bbcr; /* Enable BB Credit Recovery */
+ uint32_t cfg_enable_dpp; /* Enable Direct Packet Push */
uint32_t cfg_xri_split;
#define LPFC_ENABLE_FCP 1
#define LPFC_ENABLE_NVME 2
#define LPFC_ENABLE_BOTH 3
+ uint32_t nvme_embed_pbde;
+ uint32_t fcp_embed_pbde;
uint32_t io_channel_irqs; /* number of irqs for io channels */
struct nvmet_fc_target_port *targetport;
lpfc_vpd_t vpd; /* vital product data */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index ac77081e6e9e..2ac1d21c553f 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -259,6 +259,12 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr,
atomic_read(&tgtp->xmt_abort_rsp),
atomic_read(&tgtp->xmt_abort_rsp_error));
+ len += snprintf(buf + len, PAGE_SIZE - len,
+ "DELAY: ctx %08x fod %08x wqfull %08x\n",
+ atomic_read(&tgtp->defer_ctx),
+ atomic_read(&tgtp->defer_fod),
+ atomic_read(&tgtp->defer_wqfull));
+
/* Calculate outstanding IOs */
tot = atomic_read(&tgtp->rcv_fcp_cmd_drop);
tot += atomic_read(&tgtp->xmt_fcp_release);
@@ -905,7 +911,12 @@ lpfc_issue_lip(struct Scsi_Host *shost)
LPFC_MBOXQ_t *pmboxq;
int mbxstatus = MBXERR_ERROR;
+ /*
+ * If the link is offline, disabled or BLOCK_MGMT_IO
+ * it doesn't make any sense to allow issue_lip
+ */
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
+ (phba->hba_flag & LINK_DISABLED) ||
(phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO))
return -EPERM;
@@ -3458,8 +3469,8 @@ LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 512,
# tgt_queue_depth: This parameter is used to limit the number of outstanding
# commands per target port. Value range is [10,65535]. Default value is 65535.
*/
-LPFC_VPORT_ATTR_R(tgt_queue_depth, 65535, 10, 65535,
- "Max number of FCP commands we can queue to a specific target port");
+LPFC_VPORT_ATTR_RW(tgt_queue_depth, 65535, 10, 65535,
+ "Max number of FCP commands we can queue to a specific target port");
/*
# hba_queue_depth: This parameter is used to limit the number of outstanding
@@ -4104,23 +4115,32 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
((val == LPFC_USER_LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) ||
((val == LPFC_USER_LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)) ||
((val == LPFC_USER_LINK_SPEED_16G) && !(phba->lmt & LMT_16Gb)) ||
- ((val == LPFC_USER_LINK_SPEED_32G) && !(phba->lmt & LMT_32Gb))) {
+ ((val == LPFC_USER_LINK_SPEED_32G) && !(phba->lmt & LMT_32Gb)) ||
+ ((val == LPFC_USER_LINK_SPEED_64G) && !(phba->lmt & LMT_64Gb))) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2879 lpfc_link_speed attribute cannot be set "
"to %d. Speed is not supported by this port.\n",
val);
return -EINVAL;
}
- if (val == LPFC_USER_LINK_SPEED_16G &&
- phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
+ if (val >= LPFC_USER_LINK_SPEED_16G &&
+ phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3112 lpfc_link_speed attribute cannot be set "
"to %d. Speed is not supported in loop mode.\n",
val);
return -EINVAL;
}
- if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) &&
- (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) {
+
+ switch (val) {
+ case LPFC_USER_LINK_SPEED_AUTO:
+ case LPFC_USER_LINK_SPEED_1G:
+ case LPFC_USER_LINK_SPEED_2G:
+ case LPFC_USER_LINK_SPEED_4G:
+ case LPFC_USER_LINK_SPEED_8G:
+ case LPFC_USER_LINK_SPEED_16G:
+ case LPFC_USER_LINK_SPEED_32G:
+ case LPFC_USER_LINK_SPEED_64G:
prev_val = phba->cfg_link_speed;
phba->cfg_link_speed = val;
if (nolip)
@@ -4130,13 +4150,18 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
if (err) {
phba->cfg_link_speed = prev_val;
return -EINVAL;
- } else
- return strlen(buf);
+ }
+ return strlen(buf);
+ default:
+ break;
}
+
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0469 lpfc_link_speed attribute cannot be set to %d, "
- "allowed values are ["LPFC_LINK_SPEED_STRING"]\n", val);
+ "0469 lpfc_link_speed attribute cannot be set to %d, "
+ "allowed values are [%s]\n",
+ val, LPFC_LINK_SPEED_STRING);
return -EINVAL;
+
}
static int lpfc_link_speed = 0;
@@ -4163,24 +4188,33 @@ lpfc_param_show(link_speed)
static int
lpfc_link_speed_init(struct lpfc_hba *phba, int val)
{
- if (val == LPFC_USER_LINK_SPEED_16G && phba->cfg_topology == 4) {
+ if (val >= LPFC_USER_LINK_SPEED_16G && phba->cfg_topology == 4) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3111 lpfc_link_speed of %d cannot "
"support loop mode, setting topology to default.\n",
val);
phba->cfg_topology = 0;
}
- if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) &&
- (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) {
+
+ switch (val) {
+ case LPFC_USER_LINK_SPEED_AUTO:
+ case LPFC_USER_LINK_SPEED_1G:
+ case LPFC_USER_LINK_SPEED_2G:
+ case LPFC_USER_LINK_SPEED_4G:
+ case LPFC_USER_LINK_SPEED_8G:
+ case LPFC_USER_LINK_SPEED_16G:
+ case LPFC_USER_LINK_SPEED_32G:
+ case LPFC_USER_LINK_SPEED_64G:
phba->cfg_link_speed = val;
return 0;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0405 lpfc_link_speed attribute cannot "
+ "be set to %d, allowed values are "
+ "["LPFC_LINK_SPEED_STRING"]\n", val);
+ phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO;
+ return -EINVAL;
}
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0405 lpfc_link_speed attribute cannot "
- "be set to %d, allowed values are "
- "["LPFC_LINK_SPEED_STRING"]\n", val);
- phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO;
- return -EINVAL;
}
static DEVICE_ATTR_RW(lpfc_link_speed);
@@ -5008,6 +5042,18 @@ LPFC_ATTR_RW(nvme_oas, 0, 0, 1,
"Use OAS bit on NVME IOs");
/*
+ * lpfc_nvme_embed_cmd: Use the oas bit when sending NVME/NVMET IOs
+ *
+ * 0 = Put NVME Command in SGL
+ * 1 = Embed NVME Command in WQE (unless G7)
+ * 2 = Embed NVME Command in WQE (force)
+ *
+ * Value range is [0,2]. Default value is 1.
+ */
+LPFC_ATTR_RW(nvme_embed_cmd, 1, 0, 2,
+ "Embed NVME Command in WQE");
+
+/*
* lpfc_fcp_io_channel: Set the number of FCP IO channels the driver
* will advertise it supports to the SCSI layer. This also will map to
* the number of WQs the driver will create.
@@ -5175,6 +5221,14 @@ LPFC_ATTR_R(enable_mds_diags, 0, 0, 1, "Enable MDS Diagnostics");
*/
LPFC_BBCR_ATTR_RW(enable_bbcr, 1, 0, 1, "Enable BBC Recovery");
+/*
+ * lpfc_enable_dpp: Enable DPP on G7
+ * 0 = DPP on G7 disabled
+ * 1 = DPP on G7 enabled (default)
+ * Value range is [0,1]. Default value is 1.
+ */
+LPFC_ATTR_RW(enable_dpp, 1, 0, 1, "Enable Direct Packet Push");
+
struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_nvme_info,
&dev_attr_bg_info,
@@ -5240,6 +5294,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_lpfc_task_mgmt_tmo,
&dev_attr_lpfc_use_msi,
&dev_attr_lpfc_nvme_oas,
+ &dev_attr_lpfc_nvme_embed_cmd,
&dev_attr_lpfc_auto_imax,
&dev_attr_lpfc_fcp_imax,
&dev_attr_lpfc_fcp_cpu_map,
@@ -5283,6 +5338,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_lpfc_xlane_supported,
&dev_attr_lpfc_enable_mds_diags,
&dev_attr_lpfc_enable_bbcr,
+ &dev_attr_lpfc_enable_dpp,
NULL,
};
@@ -5696,6 +5752,9 @@ lpfc_get_host_speed(struct Scsi_Host *shost)
case LPFC_LINK_SPEED_32GHZ:
fc_host_speed(shost) = FC_PORTSPEED_32GBIT;
break;
+ case LPFC_LINK_SPEED_64GHZ:
+ fc_host_speed(shost) = FC_PORTSPEED_64GBIT;
+ break;
default:
fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
break;
@@ -6260,6 +6319,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
lpfc_enable_SmartSAN_init(phba, lpfc_enable_SmartSAN);
lpfc_use_msi_init(phba, lpfc_use_msi);
lpfc_nvme_oas_init(phba, lpfc_nvme_oas);
+ lpfc_nvme_embed_cmd_init(phba, lpfc_nvme_embed_cmd);
lpfc_auto_imax_init(phba, lpfc_auto_imax);
lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map);
@@ -6284,6 +6344,10 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
phba->cfg_poll = 0;
else
phba->cfg_poll = lpfc_poll;
+
+ if (phba->cfg_enable_bg)
+ phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
+
lpfc_suppress_rsp_init(phba, lpfc_suppress_rsp);
lpfc_enable_fc4_type_init(phba, lpfc_enable_fc4_type);
@@ -6295,6 +6359,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
lpfc_fcp_io_channel_init(phba, lpfc_fcp_io_channel);
lpfc_nvme_io_channel_init(phba, lpfc_nvme_io_channel);
lpfc_enable_bbcr_init(phba, lpfc_enable_bbcr);
+ lpfc_enable_dpp_init(phba, lpfc_enable_dpp);
if (phba->sli_rev != LPFC_SLI_REV4) {
/* NVME only supported on SLI4 */
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index d89816222b23..0f174ca80f67 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2009-2015 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -3867,7 +3867,7 @@ lpfc_bsg_sli_cfg_read_cmd_ext(struct lpfc_hba *phba, struct bsg_job *job,
"ext_buf_cnt:%d\n", ext_buf_cnt);
} else {
/* sanity check on interface type for support */
- if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
LPFC_SLI_INTF_IF_TYPE_2) {
rc = -ENODEV;
goto job_error;
@@ -4053,7 +4053,7 @@ lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct bsg_job *job,
"ext_buf_cnt:%d\n", ext_buf_cnt);
} else {
/* sanity check on interface type for support */
- if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
LPFC_SLI_INTF_IF_TYPE_2)
return -ENODEV;
/* nemb_tp == nemb_hbd */
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 559f9aa0ed08..4ae9ba425e78 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -254,6 +254,7 @@ void lpfc_nvmet_ctxbuf_post(struct lpfc_hba *phba,
struct lpfc_nvmet_ctxbuf *ctxp);
int lpfc_nvmet_rcv_unsol_abort(struct lpfc_vport *vport,
struct fc_frame_header *fc_hdr);
+void lpfc_nvmet_wqfull_process(struct lpfc_hba *phba, struct lpfc_queue *wq);
void lpfc_sli_flush_nvme_rings(struct lpfc_hba *phba);
void lpfc_nvme_wait_for_io_drain(struct lpfc_hba *phba);
void lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *, struct fcf_record *,
@@ -564,6 +565,8 @@ void lpfc_nvme_mod_param_dep(struct lpfc_hba *phba);
void lpfc_nvme_abort_fcreq_cmpl(struct lpfc_hba *phba,
struct lpfc_iocbq *cmdiocb,
struct lpfc_wcqe_complete *abts_cmpl);
+void lpfc_nvme_cmd_template(void);
+void lpfc_nvmet_cmd_template(void);
extern int lpfc_enable_nvmet_cnt;
extern unsigned long long lpfc_enable_nvmet[];
extern int lpfc_no_hba_reset_cnt;
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 9d20d2c208c7..0617c8ea88c6 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -471,7 +471,6 @@ lpfc_prep_node_fc4type(struct lpfc_vport *vport, uint32_t Did, uint8_t fc4_type)
"Parse GID_FTrsp: did:x%x flg:x%x x%x",
Did, ndlp->nlp_flag, vport->fc_flag);
- ndlp->nlp_fc4_type &= ~(NLP_FC4_FCP | NLP_FC4_NVME);
/* By default, the driver expects to support FCP FC4 */
if (fc4_type == FC_TYPE_FCP)
ndlp->nlp_fc4_type |= NLP_FC4_FCP;
@@ -2130,6 +2129,8 @@ lpfc_fdmi_port_attr_support_speed(struct lpfc_vport *vport,
ae->un.AttrInt = 0;
if (!(phba->hba_flag & HBA_FCOE_MODE)) {
+ if (phba->lmt & LMT_64Gb)
+ ae->un.AttrInt |= HBA_PORTSPEED_64GFC;
if (phba->lmt & LMT_32Gb)
ae->un.AttrInt |= HBA_PORTSPEED_32GFC;
if (phba->lmt & LMT_16Gb)
@@ -2201,6 +2202,9 @@ lpfc_fdmi_port_attr_speed(struct lpfc_vport *vport,
case LPFC_LINK_SPEED_32GHZ:
ae->un.AttrInt = HBA_PORTSPEED_32GFC;
break;
+ case LPFC_LINK_SPEED_64GHZ:
+ ae->un.AttrInt = HBA_PORTSPEED_64GFC;
+ break;
default:
ae->un.AttrInt = HBA_PORTSPEED_UNKNOWN;
break;
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 17ea3bb04266..fb0dc2aeed91 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2007-2015 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -3944,10 +3944,15 @@ lpfc_idiag_drbacc_read_reg(struct lpfc_hba *phba, char *pbuffer,
return 0;
switch (drbregid) {
- case LPFC_DRB_EQCQ:
- len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
- "EQCQ-DRB-REG: 0x%08x\n",
- readl(phba->sli4_hba.EQCQDBregaddr));
+ case LPFC_DRB_EQ:
+ len += snprintf(pbuffer + len, LPFC_DRB_ACC_BUF_SIZE-len,
+ "EQ-DRB-REG: 0x%08x\n",
+ readl(phba->sli4_hba.EQDBregaddr));
+ break;
+ case LPFC_DRB_CQ:
+ len += snprintf(pbuffer + len, LPFC_DRB_ACC_BUF_SIZE - len,
+ "CQ-DRB-REG: 0x%08x\n",
+ readl(phba->sli4_hba.CQDBregaddr));
break;
case LPFC_DRB_MQ:
len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
@@ -4086,8 +4091,11 @@ lpfc_idiag_drbacc_write(struct file *file, const char __user *buf,
idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST ||
idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) {
switch (drb_reg_id) {
- case LPFC_DRB_EQCQ:
- drb_reg = phba->sli4_hba.EQCQDBregaddr;
+ case LPFC_DRB_EQ:
+ drb_reg = phba->sli4_hba.EQDBregaddr;
+ break;
+ case LPFC_DRB_CQ:
+ drb_reg = phba->sli4_hba.CQDBregaddr;
break;
case LPFC_DRB_MQ:
drb_reg = phba->sli4_hba.MQDBregaddr;
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.h b/drivers/scsi/lpfc/lpfc_debugfs.h
index c4edd87bfc65..f32eaeb2225a 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.h
+++ b/drivers/scsi/lpfc/lpfc_debugfs.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2007-2011 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -126,12 +126,13 @@
#define LPFC_DRB_ACC_WR_CMD_ARG 2
#define LPFC_DRB_ACC_BUF_SIZE 256
-#define LPFC_DRB_EQCQ 1
-#define LPFC_DRB_MQ 2
-#define LPFC_DRB_WQ 3
-#define LPFC_DRB_RQ 4
+#define LPFC_DRB_EQ 1
+#define LPFC_DRB_CQ 2
+#define LPFC_DRB_MQ 3
+#define LPFC_DRB_WQ 4
+#define LPFC_DRB_RQ 5
-#define LPFC_DRB_MAX 4
+#define LPFC_DRB_MAX 5
#define IDIAG_DRBACC_REGID_INDX 0
#define IDIAG_DRBACC_VALUE_INDX 1
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 234c7c015982..74895e62aaea 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -1661,6 +1661,7 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
if (ndlp->nrport) {
ndlp->nrport = NULL;
lpfc_nlp_put(ndlp);
+ new_ndlp->nlp_fc4_type = ndlp->nlp_fc4_type;
}
/* We shall actually free the ndlp with both nlp_DID and
@@ -2293,10 +2294,11 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
if (phba->nvmet_support) {
bf_set(prli_tgt, npr_nvme, 1);
bf_set(prli_disc, npr_nvme, 1);
-
} else {
bf_set(prli_init, npr_nvme, 1);
+ bf_set(prli_conf, npr_nvme, 1);
}
+
npr_nvme->word1 = cpu_to_be32(npr_nvme->word1);
npr_nvme->word4 = cpu_to_be32(npr_nvme->word4);
elsiocb->iocb_flag |= LPFC_PRLI_NVME_REQ;
@@ -5269,6 +5271,9 @@ lpfc_rdp_res_speed(struct fc_rdp_port_speed_desc *desc, struct lpfc_hba *phba)
case LPFC_LINK_SPEED_32GHZ:
rdp_speed = RDP_PS_32GB;
break;
+ case LPFC_LINK_SPEED_64GHZ:
+ rdp_speed = RDP_PS_64GB;
+ break;
default:
rdp_speed = RDP_PS_UNKNOWN;
break;
@@ -5276,6 +5281,8 @@ lpfc_rdp_res_speed(struct fc_rdp_port_speed_desc *desc, struct lpfc_hba *phba)
desc->info.port_speed.speed = cpu_to_be16(rdp_speed);
+ if (phba->lmt & LMT_64Gb)
+ rdp_cap |= RDP_PS_64GB;
if (phba->lmt & LMT_32Gb)
rdp_cap |= RDP_PS_32GB;
if (phba->lmt & LMT_16Gb)
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index b159a5c4e388..3e7712cd6c9a 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -696,8 +696,9 @@ lpfc_work_done(struct lpfc_hba *phba)
phba->hba_flag & HBA_SP_QUEUE_EVT)) {
if (pring->flag & LPFC_STOP_IOCB_EVENT) {
pring->flag |= LPFC_DEFERRED_RING_EVENT;
- /* Set the lpfc data pending flag */
- set_bit(LPFC_DATA_READY, &phba->data_flags);
+ /* Preserve legacy behavior. */
+ if (!(phba->hba_flag & HBA_SP_QUEUE_EVT))
+ set_bit(LPFC_DATA_READY, &phba->data_flags);
} else {
if (phba->link_state >= LPFC_LINK_UP ||
phba->link_flag & LS_MDS_LOOPBACK) {
@@ -958,6 +959,7 @@ lpfc_linkup_cleanup_nodes(struct lpfc_vport *vport)
struct lpfc_nodelist *ndlp;
list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
+ ndlp->nlp_fc4_type &= ~(NLP_FC4_FCP | NLP_FC4_NVME);
if (!NLP_CHK_NODE_ACT(ndlp))
continue;
if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
@@ -3083,6 +3085,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
case LPFC_LINK_SPEED_10GHZ:
case LPFC_LINK_SPEED_16GHZ:
case LPFC_LINK_SPEED_32GHZ:
+ case LPFC_LINK_SPEED_64GHZ:
break;
default:
phba->fc_linkspeed = LPFC_LINK_SPEED_UNKNOWN;
@@ -3873,6 +3876,10 @@ int
lpfc_issue_gidft(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
+ struct lpfc_nodelist *ndlp;
+
+ list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp)
+ ndlp->nlp_fc4_type &= ~(NLP_FC4_FCP | NLP_FC4_NVME);
/* Good status, issue CT Request to NameServer */
if ((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index bdc1f184f67a..08a3f1520159 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -1177,6 +1177,9 @@ struct fc_rdp_link_error_status_desc {
#define RDP_PS_8GB 0x0800
#define RDP_PS_16GB 0x0400
#define RDP_PS_32GB 0x0200
+#define RDP_PS_64GB 0x0100
+#define RDP_PS_128GB 0x0080
+#define RDP_PS_256GB 0x0040
#define RDP_CAP_USER_CONFIGURED 0x0002
#define RDP_CAP_UNKNOWN 0x0001
@@ -1580,6 +1583,7 @@ struct lpfc_fdmi_reg_portattr {
#define PCI_DEVICE_ID_LANCER_FCOE 0xe260
#define PCI_DEVICE_ID_LANCER_FCOE_VF 0xe268
#define PCI_DEVICE_ID_LANCER_G6_FC 0xe300
+#define PCI_DEVICE_ID_LANCER_G7_FC 0xf400
#define PCI_DEVICE_ID_SAT_SMB 0xf011
#define PCI_DEVICE_ID_SAT_MID 0xf015
#define PCI_DEVICE_ID_RFLY 0xf095
@@ -2257,6 +2261,9 @@ typedef struct {
#define LINK_SPEED_10G 0x10 /* 10 Gigabaud */
#define LINK_SPEED_16G 0x11 /* 16 Gigabaud */
#define LINK_SPEED_32G 0x14 /* 32 Gigabaud */
+#define LINK_SPEED_64G 0x17 /* 64 Gigabaud */
+#define LINK_SPEED_128G 0x1A /* 128 Gigabaud */
+#define LINK_SPEED_256G 0x1D /* 256 Gigabaud */
} INIT_LINK_VAR;
@@ -2441,6 +2448,9 @@ typedef struct {
#define LMT_10Gb 0x100
#define LMT_16Gb 0x200
#define LMT_32Gb 0x400
+#define LMT_64Gb 0x800
+#define LMT_128Gb 0x1000
+#define LMT_256Gb 0x2000
uint32_t rsvd2;
uint32_t rsvd3;
uint32_t max_xri;
@@ -2965,6 +2975,9 @@ struct lpfc_mbx_read_top {
#define LPFC_LINK_SPEED_10GHZ 0x40
#define LPFC_LINK_SPEED_16GHZ 0x80
#define LPFC_LINK_SPEED_32GHZ 0x90
+#define LPFC_LINK_SPEED_64GHZ 0xA0
+#define LPFC_LINK_SPEED_128GHZ 0xB0
+#define LPFC_LINK_SPEED_256GHZ 0xC0
};
/* Structure for MB Command CLEAR_LA (22) */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 73c2f6971d2b..98b80559c215 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2009-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -84,6 +84,7 @@ struct lpfc_sli_intf {
#define LPFC_SLI_INTF_IF_TYPE_0 0
#define LPFC_SLI_INTF_IF_TYPE_1 1
#define LPFC_SLI_INTF_IF_TYPE_2 2
+#define LPFC_SLI_INTF_IF_TYPE_6 6
#define lpfc_sli_intf_sli_family_SHIFT 8
#define lpfc_sli_intf_sli_family_MASK 0x0000000F
#define lpfc_sli_intf_sli_family_WORD word0
@@ -731,11 +732,13 @@ struct lpfc_register {
* register sets depending on the UCNA Port's reported if_type
* value. For UCNA ports running SLI4 and if_type 0, they reside in
* BAR4. For UCNA ports running SLI4 and if_type 2, they reside in
- * BAR0. The offsets are the same so the driver must account for
- * any base address difference.
+ * BAR0. For FC ports running SLI4 and if_type 6, they reside in
+ * BAR2. The offsets and base address are different, so the driver
+ * has to compute the register addresses accordingly
*/
#define LPFC_ULP0_RQ_DOORBELL 0x00A0
#define LPFC_ULP1_RQ_DOORBELL 0x00C0
+#define LPFC_IF6_RQ_DOORBELL 0x0080
#define lpfc_rq_db_list_fm_num_posted_SHIFT 24
#define lpfc_rq_db_list_fm_num_posted_MASK 0x00FF
#define lpfc_rq_db_list_fm_num_posted_WORD word0
@@ -770,6 +773,20 @@ struct lpfc_register {
#define lpfc_wq_db_ring_fm_id_MASK 0xFFFF
#define lpfc_wq_db_ring_fm_id_WORD word0
+#define LPFC_IF6_WQ_DOORBELL 0x0040
+#define lpfc_if6_wq_db_list_fm_num_posted_SHIFT 24
+#define lpfc_if6_wq_db_list_fm_num_posted_MASK 0x00FF
+#define lpfc_if6_wq_db_list_fm_num_posted_WORD word0
+#define lpfc_if6_wq_db_list_fm_dpp_SHIFT 23
+#define lpfc_if6_wq_db_list_fm_dpp_MASK 0x0001
+#define lpfc_if6_wq_db_list_fm_dpp_WORD word0
+#define lpfc_if6_wq_db_list_fm_dpp_id_SHIFT 16
+#define lpfc_if6_wq_db_list_fm_dpp_id_MASK 0x001F
+#define lpfc_if6_wq_db_list_fm_dpp_id_WORD word0
+#define lpfc_if6_wq_db_list_fm_id_SHIFT 0
+#define lpfc_if6_wq_db_list_fm_id_MASK 0xFFFF
+#define lpfc_if6_wq_db_list_fm_id_WORD word0
+
#define LPFC_EQCQ_DOORBELL 0x0120
#define lpfc_eqcq_doorbell_se_SHIFT 31
#define lpfc_eqcq_doorbell_se_MASK 0x0001
@@ -805,6 +822,38 @@ struct lpfc_register {
#define LPFC_CQID_HI_FIELD_SHIFT 10
#define LPFC_EQID_HI_FIELD_SHIFT 9
+#define LPFC_IF6_CQ_DOORBELL 0x00C0
+#define lpfc_if6_cq_doorbell_se_SHIFT 31
+#define lpfc_if6_cq_doorbell_se_MASK 0x0001
+#define lpfc_if6_cq_doorbell_se_WORD word0
+#define LPFC_IF6_CQ_SOLICIT_ENABLE_OFF 0
+#define LPFC_IF6_CQ_SOLICIT_ENABLE_ON 1
+#define lpfc_if6_cq_doorbell_arm_SHIFT 29
+#define lpfc_if6_cq_doorbell_arm_MASK 0x0001
+#define lpfc_if6_cq_doorbell_arm_WORD word0
+#define lpfc_if6_cq_doorbell_num_released_SHIFT 16
+#define lpfc_if6_cq_doorbell_num_released_MASK 0x1FFF
+#define lpfc_if6_cq_doorbell_num_released_WORD word0
+#define lpfc_if6_cq_doorbell_cqid_SHIFT 0
+#define lpfc_if6_cq_doorbell_cqid_MASK 0xFFFF
+#define lpfc_if6_cq_doorbell_cqid_WORD word0
+
+#define LPFC_IF6_EQ_DOORBELL 0x0120
+#define lpfc_if6_eq_doorbell_io_SHIFT 31
+#define lpfc_if6_eq_doorbell_io_MASK 0x0001
+#define lpfc_if6_eq_doorbell_io_WORD word0
+#define LPFC_IF6_EQ_INTR_OVERRIDE_OFF 0
+#define LPFC_IF6_EQ_INTR_OVERRIDE_ON 1
+#define lpfc_if6_eq_doorbell_arm_SHIFT 29
+#define lpfc_if6_eq_doorbell_arm_MASK 0x0001
+#define lpfc_if6_eq_doorbell_arm_WORD word0
+#define lpfc_if6_eq_doorbell_num_released_SHIFT 16
+#define lpfc_if6_eq_doorbell_num_released_MASK 0x1FFF
+#define lpfc_if6_eq_doorbell_num_released_WORD word0
+#define lpfc_if6_eq_doorbell_eqid_SHIFT 0
+#define lpfc_if6_eq_doorbell_eqid_MASK 0x0FFF
+#define lpfc_if6_eq_doorbell_eqid_WORD word0
+
#define LPFC_BMBX 0x0160
#define lpfc_bmbx_addr_SHIFT 2
#define lpfc_bmbx_addr_MASK 0x3FFFFFFF
@@ -817,6 +866,7 @@ struct lpfc_register {
#define lpfc_bmbx_rdy_WORD word0
#define LPFC_MQ_DOORBELL 0x0140
+#define LPFC_IF6_MQ_DOORBELL 0x0160
#define lpfc_mq_doorbell_num_posted_SHIFT 16
#define lpfc_mq_doorbell_num_posted_MASK 0x3FFF
#define lpfc_mq_doorbell_num_posted_WORD word0
@@ -990,6 +1040,9 @@ struct eq_context {
#define lpfc_eq_context_valid_SHIFT 29
#define lpfc_eq_context_valid_MASK 0x00000001
#define lpfc_eq_context_valid_WORD word0
+#define lpfc_eq_context_autovalid_SHIFT 28
+#define lpfc_eq_context_autovalid_MASK 0x00000001
+#define lpfc_eq_context_autovalid_WORD word0
uint32_t word1;
#define lpfc_eq_context_count_SHIFT 26
#define lpfc_eq_context_count_MASK 0x00000003
@@ -1123,6 +1176,9 @@ struct cq_context {
#define LPFC_CQ_CNT_512 0x1
#define LPFC_CQ_CNT_1024 0x2
#define LPFC_CQ_CNT_WORD7 0x3
+#define lpfc_cq_context_autovalid_SHIFT 15
+#define lpfc_cq_context_autovalid_MASK 0x00000001
+#define lpfc_cq_context_autovalid_WORD word0
uint32_t word1;
#define lpfc_cq_eq_id_SHIFT 22 /* Version 0 Only */
#define lpfc_cq_eq_id_MASK 0x000000FF
@@ -1181,9 +1237,9 @@ struct lpfc_mbx_cq_create_set {
#define lpfc_mbx_cq_create_set_cqe_size_SHIFT 25
#define lpfc_mbx_cq_create_set_cqe_size_MASK 0x00000003
#define lpfc_mbx_cq_create_set_cqe_size_WORD word1
-#define lpfc_mbx_cq_create_set_auto_SHIFT 15
-#define lpfc_mbx_cq_create_set_auto_MASK 0x0000001
-#define lpfc_mbx_cq_create_set_auto_WORD word1
+#define lpfc_mbx_cq_create_set_autovalid_SHIFT 15
+#define lpfc_mbx_cq_create_set_autovalid_MASK 0x0000001
+#define lpfc_mbx_cq_create_set_autovalid_WORD word1
#define lpfc_mbx_cq_create_set_nodelay_SHIFT 14
#define lpfc_mbx_cq_create_set_nodelay_MASK 0x00000001
#define lpfc_mbx_cq_create_set_nodelay_WORD word1
@@ -1322,6 +1378,15 @@ struct lpfc_mbx_wq_create {
#define lpfc_mbx_wq_create_page_size_MASK 0x000000FF
#define lpfc_mbx_wq_create_page_size_WORD word1
#define LPFC_WQ_PAGE_SIZE_4096 0x1
+#define lpfc_mbx_wq_create_dpp_req_SHIFT 15
+#define lpfc_mbx_wq_create_dpp_req_MASK 0x00000001
+#define lpfc_mbx_wq_create_dpp_req_WORD word1
+#define lpfc_mbx_wq_create_doe_SHIFT 14
+#define lpfc_mbx_wq_create_doe_MASK 0x00000001
+#define lpfc_mbx_wq_create_doe_WORD word1
+#define lpfc_mbx_wq_create_toe_SHIFT 13
+#define lpfc_mbx_wq_create_toe_MASK 0x00000001
+#define lpfc_mbx_wq_create_toe_WORD word1
#define lpfc_mbx_wq_create_wqe_size_SHIFT 8
#define lpfc_mbx_wq_create_wqe_size_MASK 0x0000000F
#define lpfc_mbx_wq_create_wqe_size_WORD word1
@@ -1350,6 +1415,28 @@ struct lpfc_mbx_wq_create {
#define lpfc_mbx_wq_create_db_format_MASK 0x0000FFFF
#define lpfc_mbx_wq_create_db_format_WORD word2
} response;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_wq_create_dpp_rsp_SHIFT 31
+#define lpfc_mbx_wq_create_dpp_rsp_MASK 0x00000001
+#define lpfc_mbx_wq_create_dpp_rsp_WORD word0
+#define lpfc_mbx_wq_create_v1_q_id_SHIFT 0
+#define lpfc_mbx_wq_create_v1_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_wq_create_v1_q_id_WORD word0
+ uint32_t word1;
+#define lpfc_mbx_wq_create_v1_bar_set_SHIFT 0
+#define lpfc_mbx_wq_create_v1_bar_set_MASK 0x0000000F
+#define lpfc_mbx_wq_create_v1_bar_set_WORD word1
+ uint32_t doorbell_offset;
+ uint32_t word3;
+#define lpfc_mbx_wq_create_dpp_id_SHIFT 16
+#define lpfc_mbx_wq_create_dpp_id_MASK 0x0000001F
+#define lpfc_mbx_wq_create_dpp_id_WORD word3
+#define lpfc_mbx_wq_create_dpp_bar_SHIFT 0
+#define lpfc_mbx_wq_create_dpp_bar_MASK 0x0000000F
+#define lpfc_mbx_wq_create_dpp_bar_WORD word3
+ uint32_t dpp_offset;
+ } response_1;
} u;
};
@@ -2154,6 +2241,7 @@ struct lpfc_mbx_redisc_fcf_tbl {
* command.
*/
#define ADD_STATUS_OPERATION_ALREADY_ACTIVE 0x67
+#define ADD_STATUS_FW_NOT_SUPPORTED 0xEB
struct lpfc_mbx_sli4_config {
struct mbox_header header;
@@ -2590,6 +2678,7 @@ struct lpfc_mbx_read_rev {
#define lpfc_mbx_rd_rev_vpd_MASK 0x00000001
#define lpfc_mbx_rd_rev_vpd_WORD word1
uint32_t first_hw_rev;
+#define LPFC_G7_ASIC_1 0xd
uint32_t second_hw_rev;
uint32_t word4_rsvd;
uint32_t third_hw_rev;
@@ -3207,11 +3296,20 @@ struct lpfc_sli4_parameters {
#define cfg_sli_hint_2_MASK 0x0000001f
#define cfg_sli_hint_2_WORD word1
uint32_t word2;
+#define cfg_eqav_SHIFT 31
+#define cfg_eqav_MASK 0x00000001
+#define cfg_eqav_WORD word2
uint32_t word3;
uint32_t word4;
#define cfg_cqv_SHIFT 14
#define cfg_cqv_MASK 0x00000003
#define cfg_cqv_WORD word4
+#define cfg_cqpsize_SHIFT 16
+#define cfg_cqpsize_MASK 0x000000ff
+#define cfg_cqpsize_WORD word4
+#define cfg_cqav_SHIFT 31
+#define cfg_cqav_MASK 0x00000001
+#define cfg_cqav_WORD word4
uint32_t word5;
uint32_t word6;
#define cfg_mqv_SHIFT 14
@@ -3290,6 +3388,9 @@ struct lpfc_sli4_parameters {
#define cfg_eqdr_SHIFT 8
#define cfg_eqdr_MASK 0x00000001
#define cfg_eqdr_WORD word19
+#define cfg_nosr_SHIFT 9
+#define cfg_nosr_MASK 0x00000001
+#define cfg_nosr_WORD word19
#define LPFC_NODELAY_MAX_IO 32
};
@@ -3874,6 +3975,9 @@ struct lpfc_acqe_fc_la {
#define LPFC_FC_LA_SPEED_10G 0xA
#define LPFC_FC_LA_SPEED_16G 0x10
#define LPFC_FC_LA_SPEED_32G 0x20
+#define LPFC_FC_LA_SPEED_64G 0x21
+#define LPFC_FC_LA_SPEED_128G 0x22
+#define LPFC_FC_LA_SPEED_256G 0x23
#define lpfc_acqe_fc_la_topology_SHIFT 16
#define lpfc_acqe_fc_la_topology_MASK 0x000000FF
#define lpfc_acqe_fc_la_topology_WORD word0
@@ -4079,6 +4183,7 @@ struct wqe_common {
#define wqe_iod_SHIFT 13
#define wqe_iod_MASK 0x00000001
#define wqe_iod_WORD word10
+#define LPFC_WQE_IOD_NONE 0
#define LPFC_WQE_IOD_WRITE 0
#define LPFC_WQE_IOD_READ 1
#define wqe_dbde_SHIFT 14
@@ -4123,6 +4228,9 @@ struct wqe_common {
#define wqe_irsp_SHIFT 4
#define wqe_irsp_MASK 0x00000001
#define wqe_irsp_WORD word11
+#define wqe_pbde_SHIFT 5
+#define wqe_pbde_MASK 0x00000001
+#define wqe_pbde_WORD word11
#define wqe_sup_SHIFT 6
#define wqe_sup_MASK 0x00000001
#define wqe_sup_WORD word11
@@ -4343,9 +4451,9 @@ struct lpfc_nvme_prli {
#define prli_init_SHIFT 5
#define prli_init_MASK 0x00000001
#define prli_init_WORD word4
-#define prli_recov_SHIFT 8
-#define prli_recov_MASK 0x00000001
-#define prli_recov_WORD word4
+#define prli_conf_SHIFT 7
+#define prli_conf_MASK 0x00000001
+#define prli_conf_WORD word4
uint32_t word5;
#define prli_fb_sz_SHIFT 0
#define prli_fb_sz_MASK 0x0000ffff
@@ -4494,17 +4602,20 @@ union lpfc_wqe128 {
struct fcp_icmnd64_wqe fcp_icmd;
struct fcp_iread64_wqe fcp_iread;
struct fcp_iwrite64_wqe fcp_iwrite;
+ struct abort_cmd_wqe abort_cmd;
+ struct create_xri_wqe create_xri;
+ struct xmit_bcast64_wqe xmit_bcast64;
+ struct xmit_seq64_wqe xmit_sequence;
+ struct xmit_bls_rsp64_wqe xmit_bls_rsp;
+ struct xmit_els_rsp64_wqe xmit_els_rsp;
+ struct els_request64_wqe els_req;
+ struct gen_req64_wqe gen_req;
struct fcp_trsp64_wqe fcp_trsp;
struct fcp_tsend64_wqe fcp_tsend;
struct fcp_treceive64_wqe fcp_treceive;
- struct xmit_seq64_wqe xmit_sequence;
- struct gen_req64_wqe gen_req;
+ struct send_frame_wqe send_frame;
};
-#define LPFC_GROUP_OJECT_MAGIC_G5 0xfeaa0001
-#define LPFC_GROUP_OJECT_MAGIC_G6 0xfeaa0003
-#define LPFC_FILE_TYPE_GROUP 0xf7
-#define LPFC_FILE_ID_GROUP 0xa2
struct lpfc_grp_hdr {
uint32_t size;
uint32_t magic_number;
diff --git a/drivers/scsi/lpfc/lpfc_ids.h b/drivers/scsi/lpfc/lpfc_ids.h
index 0ba3733eb36d..07ee34017d88 100644
--- a/drivers/scsi/lpfc/lpfc_ids.h
+++ b/drivers/scsi/lpfc/lpfc_ids.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -116,6 +116,8 @@ const struct pci_device_id lpfc_id_table[] = {
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_G6_FC,
PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_G7_FC,
+ PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SKYHAWK,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SKYHAWK_VF,
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index f539c554588c..7887468c71b4 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -731,7 +731,9 @@ lpfc_hba_init_link_fc_topology(struct lpfc_hba *phba, uint32_t fc_topology,
((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G) &&
!(phba->lmt & LMT_16Gb)) ||
((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_32G) &&
- !(phba->lmt & LMT_32Gb))) {
+ !(phba->lmt & LMT_32Gb)) ||
+ ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_64G) &&
+ !(phba->lmt & LMT_64Gb))) {
/* Reset link speed to auto */
lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
"1302 Invalid speed for this board:%d "
@@ -958,6 +960,7 @@ lpfc_hba_clean_txcmplq(struct lpfc_hba *phba)
struct lpfc_sli_ring *pring;
LIST_HEAD(completions);
int i;
+ struct lpfc_iocbq *piocb, *next_iocb;
if (phba->sli_rev != LPFC_SLI_REV4) {
for (i = 0; i < psli->num_rings; i++) {
@@ -983,6 +986,9 @@ lpfc_hba_clean_txcmplq(struct lpfc_hba *phba)
if (!pring)
continue;
spin_lock_irq(&pring->ring_lock);
+ list_for_each_entry_safe(piocb, next_iocb,
+ &pring->txcmplq, list)
+ piocb->iocb_flag &= ~LPFC_IO_ON_TXCMPLQ;
list_splice_init(&pring->txcmplq, &completions);
pring->txcmplq_cnt = 0;
spin_unlock_irq(&pring->ring_lock);
@@ -1757,7 +1763,7 @@ lpfc_sli4_port_sta_fn_reset(struct lpfc_hba *phba, int mbx_action,
int rc;
uint32_t intr_mode;
- if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >=
LPFC_SLI_INTF_IF_TYPE_2) {
/*
* On error status condition, driver need to wait for port
@@ -1888,6 +1894,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
break;
case LPFC_SLI_INTF_IF_TYPE_2:
+ case LPFC_SLI_INTF_IF_TYPE_6:
pci_rd_rc1 = lpfc_readl(
phba->sli4_hba.u.if_type2.STATUSregaddr,
&portstat_reg.word0);
@@ -2269,7 +2276,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
&& descp && descp[0] != '\0')
return;
- if (phba->lmt & LMT_32Gb)
+ if (phba->lmt & LMT_64Gb)
+ max_speed = 64;
+ else if (phba->lmt & LMT_32Gb)
max_speed = 32;
else if (phba->lmt & LMT_16Gb)
max_speed = 16;
@@ -2468,6 +2477,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
case PCI_DEVICE_ID_LANCER_G6_FC:
m = (typeof(m)){"LPe32000", "PCIe", "Fibre Channel Adapter"};
break;
+ case PCI_DEVICE_ID_LANCER_G7_FC:
+ m = (typeof(m)){"LPe36000", "PCIe", "Fibre Channel Adapter"};
+ break;
case PCI_DEVICE_ID_SKYHAWK:
case PCI_DEVICE_ID_SKYHAWK_VF:
oneConnect = 1;
@@ -4104,6 +4116,8 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost)
sizeof fc_host_symbolic_name(shost));
fc_host_supported_speeds(shost) = 0;
+ if (phba->lmt & LMT_64Gb)
+ fc_host_supported_speeds(shost) |= FC_PORTSPEED_64GBIT;
if (phba->lmt & LMT_32Gb)
fc_host_supported_speeds(shost) |= FC_PORTSPEED_32GBIT;
if (phba->lmt & LMT_16Gb)
@@ -4440,6 +4454,9 @@ lpfc_sli4_port_speed_parse(struct lpfc_hba *phba, uint32_t evt_code,
case LPFC_FC_LA_SPEED_32G:
port_speed = 32000;
break;
+ case LPFC_FC_LA_SPEED_64G:
+ port_speed = 64000;
+ break;
default:
port_speed = 0;
}
@@ -5895,7 +5912,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
* Since lpfc_sg_seg_cnt is module param, the sg_dma_buf_size
* used to create the sg_dma_buf_pool must be calculated.
*/
- if (phba->cfg_enable_bg) {
+ if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) {
/*
* The scsi_buf for a T10-DIF I/O holds the FCP cmnd,
* the FCP rsp, and a SGE. Sice we have no control
@@ -6014,7 +6031,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
return -ENOMEM;
/* IF Type 2 ports get initialized now. */
- if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >=
LPFC_SLI_INTF_IF_TYPE_2) {
rc = lpfc_pci_function_reset(phba);
if (unlikely(rc)) {
@@ -7344,6 +7361,7 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba)
}
break;
case LPFC_SLI_INTF_IF_TYPE_2:
+ case LPFC_SLI_INTF_IF_TYPE_6:
/* Final checks. The port status should be clean. */
if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
&reg_data.word0) ||
@@ -7426,13 +7444,36 @@ lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba, uint32_t if_type)
phba->sli4_hba.WQDBregaddr =
phba->sli4_hba.conf_regs_memmap_p +
LPFC_ULP0_WQ_DOORBELL;
- phba->sli4_hba.EQCQDBregaddr =
+ phba->sli4_hba.CQDBregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_EQCQ_DOORBELL;
+ phba->sli4_hba.EQDBregaddr = phba->sli4_hba.CQDBregaddr;
phba->sli4_hba.MQDBregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_MQ_DOORBELL;
phba->sli4_hba.BMBXregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_BMBX;
break;
+ case LPFC_SLI_INTF_IF_TYPE_6:
+ phba->sli4_hba.u.if_type2.EQDregaddr =
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_EQ_DELAY_OFFSET;
+ phba->sli4_hba.u.if_type2.ERR1regaddr =
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_ER1_OFFSET;
+ phba->sli4_hba.u.if_type2.ERR2regaddr =
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_ER2_OFFSET;
+ phba->sli4_hba.u.if_type2.CTRLregaddr =
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_CTL_OFFSET;
+ phba->sli4_hba.u.if_type2.STATUSregaddr =
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_STA_OFFSET;
+ phba->sli4_hba.PSMPHRregaddr =
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_SEM_OFFSET;
+ phba->sli4_hba.BMBXregaddr =
+ phba->sli4_hba.conf_regs_memmap_p + LPFC_BMBX;
+ break;
case LPFC_SLI_INTF_IF_TYPE_1:
default:
dev_printk(KERN_ERR, &phba->pcidev->dev,
@@ -7446,20 +7487,43 @@ lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba, uint32_t if_type)
* lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
* @phba: pointer to lpfc hba data structure.
*
- * This routine is invoked to set up SLI4 BAR1 control status register (CSR)
- * memory map.
+ * This routine is invoked to set up SLI4 BAR1 register memory map.
**/
static void
-lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba)
+lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba, uint32_t if_type)
{
- phba->sli4_hba.PSMPHRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
- LPFC_SLIPORT_IF0_SMPHR;
- phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
- LPFC_HST_ISR0;
- phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
- LPFC_HST_IMR0;
- phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
- LPFC_HST_ISCR0;
+ switch (if_type) {
+ case LPFC_SLI_INTF_IF_TYPE_0:
+ phba->sli4_hba.PSMPHRregaddr =
+ phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_SLIPORT_IF0_SMPHR;
+ phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_ISR0;
+ phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_IMR0;
+ phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_ISCR0;
+ break;
+ case LPFC_SLI_INTF_IF_TYPE_6:
+ phba->sli4_hba.RQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
+ LPFC_IF6_RQ_DOORBELL;
+ phba->sli4_hba.WQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
+ LPFC_IF6_WQ_DOORBELL;
+ phba->sli4_hba.CQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
+ LPFC_IF6_CQ_DOORBELL;
+ phba->sli4_hba.EQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
+ LPFC_IF6_EQ_DOORBELL;
+ phba->sli4_hba.MQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
+ LPFC_IF6_MQ_DOORBELL;
+ break;
+ case LPFC_SLI_INTF_IF_TYPE_2:
+ case LPFC_SLI_INTF_IF_TYPE_1:
+ default:
+ dev_err(&phba->pcidev->dev,
+ "FATAL - unsupported SLI4 interface type - %d\n",
+ if_type);
+ break;
+ }
}
/**
@@ -7484,8 +7548,10 @@ lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
vf * LPFC_VFR_PAGE_SIZE +
LPFC_ULP0_WQ_DOORBELL);
- phba->sli4_hba.EQCQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
- vf * LPFC_VFR_PAGE_SIZE + LPFC_EQCQ_DOORBELL);
+ phba->sli4_hba.CQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE +
+ LPFC_EQCQ_DOORBELL);
+ phba->sli4_hba.EQDBregaddr = phba->sli4_hba.CQDBregaddr;
phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL);
phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
@@ -7722,7 +7788,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
/* Update link speed if forced link speed is supported */
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
- if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
+ if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
forced_link_speed =
bf_get(lpfc_mbx_rd_conf_link_speed, rd_config);
if (forced_link_speed) {
@@ -7757,6 +7823,10 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
phba->cfg_link_speed =
LPFC_USER_LINK_SPEED_32G;
break;
+ case LINK_SPEED_64G:
+ phba->cfg_link_speed =
+ LPFC_USER_LINK_SPEED_64G;
+ break;
case 0xffff:
phba->cfg_link_speed =
LPFC_USER_LINK_SPEED_AUTO;
@@ -7782,7 +7852,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
phba->cfg_hba_queue_depth = length;
}
- if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
LPFC_SLI_INTF_IF_TYPE_2)
goto read_cfg_out;
@@ -7896,6 +7966,7 @@ lpfc_setup_endian_order(struct lpfc_hba *phba)
}
mempool_free(mboxq, phba->mbox_mem_pool);
break;
+ case LPFC_SLI_INTF_IF_TYPE_6:
case LPFC_SLI_INTF_IF_TYPE_2:
case LPFC_SLI_INTF_IF_TYPE_1:
default:
@@ -7992,6 +8063,7 @@ lpfc_alloc_nvme_wq_cq(struct lpfc_hba *phba, int wqidx)
wqidx);
return 1;
}
+ qdesc->qe_valid = 1;
phba->sli4_hba.nvme_cq[wqidx] = qdesc;
qdesc = lpfc_sli4_queue_alloc(phba, LPFC_EXPANDED_PAGE_SIZE,
@@ -8011,9 +8083,10 @@ static int
lpfc_alloc_fcp_wq_cq(struct lpfc_hba *phba, int wqidx)
{
struct lpfc_queue *qdesc;
+ uint32_t wqesize;
/* Create Fast Path FCP CQs */
- if (phba->fcp_embed_io)
+ if (phba->enab_exp_wqcq_pages)
/* Increase the CQ size when WQEs contain an embedded cdb */
qdesc = lpfc_sli4_queue_alloc(phba, LPFC_EXPANDED_PAGE_SIZE,
phba->sli4_hba.cq_esize,
@@ -8028,18 +8101,22 @@ lpfc_alloc_fcp_wq_cq(struct lpfc_hba *phba, int wqidx)
"0499 Failed allocate fast-path FCP CQ (%d)\n", wqidx);
return 1;
}
+ qdesc->qe_valid = 1;
phba->sli4_hba.fcp_cq[wqidx] = qdesc;
/* Create Fast Path FCP WQs */
- if (phba->fcp_embed_io)
+ if (phba->enab_exp_wqcq_pages) {
/* Increase the WQ size when WQEs contain an embedded cdb */
+ wqesize = (phba->fcp_embed_io) ?
+ LPFC_WQE128_SIZE : phba->sli4_hba.wq_esize;
qdesc = lpfc_sli4_queue_alloc(phba, LPFC_EXPANDED_PAGE_SIZE,
- LPFC_WQE128_SIZE,
+ wqesize,
LPFC_WQE_EXP_COUNT);
- else
+ } else
qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
phba->sli4_hba.wq_esize,
phba->sli4_hba.wq_ecount);
+
if (!qdesc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0503 Failed allocate fast-path FCP WQ (%d)\n",
@@ -8218,6 +8295,7 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
"0497 Failed allocate EQ (%d)\n", idx);
goto out_error;
}
+ qdesc->qe_valid = 1;
phba->sli4_hba.hba_eq[idx] = qdesc;
}
@@ -8243,6 +8321,7 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
"CQ Set (%d)\n", idx);
goto out_error;
}
+ qdesc->qe_valid = 1;
phba->sli4_hba.nvmet_cqset[idx] = qdesc;
}
}
@@ -8260,6 +8339,7 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
"0500 Failed allocate slow-path mailbox CQ\n");
goto out_error;
}
+ qdesc->qe_valid = 1;
phba->sli4_hba.mbx_cq = qdesc;
/* Create slow-path ELS Complete Queue */
@@ -8271,6 +8351,7 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
"0501 Failed allocate slow-path ELS CQ\n");
goto out_error;
}
+ qdesc->qe_valid = 1;
phba->sli4_hba.els_cq = qdesc;
@@ -8316,6 +8397,7 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
"6079 Failed allocate NVME LS CQ\n");
goto out_error;
}
+ qdesc->qe_valid = 1;
phba->sli4_hba.nvmels_cq = qdesc;
/* Create NVME LS Work Queue */
@@ -9303,6 +9385,7 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
}
break;
case LPFC_SLI_INTF_IF_TYPE_2:
+ case LPFC_SLI_INTF_IF_TYPE_6:
wait:
/*
* Poll the Port Status Register and wait for RDY for
@@ -9458,7 +9541,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
} else {
phba->pci_bar0_map = pci_resource_start(pdev, 1);
bar0map_len = pci_resource_len(pdev, 1);
- if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
+ if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
dev_printk(KERN_ERR, &pdev->dev,
"FATAL - No BAR0 mapping for SLI4, if_type 2\n");
goto out;
@@ -9495,13 +9578,32 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
}
phba->pci_bar2_memmap_p =
phba->sli4_hba.ctrl_regs_memmap_p;
- lpfc_sli4_bar1_register_memmap(phba);
+ lpfc_sli4_bar1_register_memmap(phba, if_type);
} else {
error = -ENOMEM;
goto out_iounmap_conf;
}
}
+ if ((if_type == LPFC_SLI_INTF_IF_TYPE_6) &&
+ (pci_resource_start(pdev, PCI_64BIT_BAR2))) {
+ /*
+ * Map SLI4 if type 6 HBA Doorbell Register base to a kernel
+ * virtual address and setup the registers.
+ */
+ phba->pci_bar1_map = pci_resource_start(pdev, PCI_64BIT_BAR2);
+ bar1map_len = pci_resource_len(pdev, PCI_64BIT_BAR2);
+ phba->sli4_hba.drbl_regs_memmap_p =
+ ioremap(phba->pci_bar1_map, bar1map_len);
+ if (!phba->sli4_hba.drbl_regs_memmap_p) {
+ dev_err(&pdev->dev,
+ "ioremap failed for SLI4 HBA doorbell registers.\n");
+ goto out_iounmap_conf;
+ }
+ phba->pci_bar2_memmap_p = phba->sli4_hba.drbl_regs_memmap_p;
+ lpfc_sli4_bar1_register_memmap(phba, if_type);
+ }
+
if (if_type == LPFC_SLI_INTF_IF_TYPE_0) {
if (pci_resource_start(pdev, PCI_64BIT_BAR4)) {
/*
@@ -9532,6 +9634,41 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
}
}
+ if (if_type == LPFC_SLI_INTF_IF_TYPE_6 &&
+ pci_resource_start(pdev, PCI_64BIT_BAR4)) {
+ /*
+ * Map SLI4 if type 6 HBA DPP Register base to a kernel
+ * virtual address and setup the registers.
+ */
+ phba->pci_bar2_map = pci_resource_start(pdev, PCI_64BIT_BAR4);
+ bar2map_len = pci_resource_len(pdev, PCI_64BIT_BAR4);
+ phba->sli4_hba.dpp_regs_memmap_p =
+ ioremap(phba->pci_bar2_map, bar2map_len);
+ if (!phba->sli4_hba.dpp_regs_memmap_p) {
+ dev_err(&pdev->dev,
+ "ioremap failed for SLI4 HBA dpp registers.\n");
+ goto out_iounmap_ctrl;
+ }
+ phba->pci_bar4_memmap_p = phba->sli4_hba.dpp_regs_memmap_p;
+ }
+
+ /* Set up the EQ/CQ register handeling functions now */
+ switch (if_type) {
+ case LPFC_SLI_INTF_IF_TYPE_0:
+ case LPFC_SLI_INTF_IF_TYPE_2:
+ phba->sli4_hba.sli4_eq_clr_intr = lpfc_sli4_eq_clr_intr;
+ phba->sli4_hba.sli4_eq_release = lpfc_sli4_eq_release;
+ phba->sli4_hba.sli4_cq_release = lpfc_sli4_cq_release;
+ break;
+ case LPFC_SLI_INTF_IF_TYPE_6:
+ phba->sli4_hba.sli4_eq_clr_intr = lpfc_sli4_if6_eq_clr_intr;
+ phba->sli4_hba.sli4_eq_release = lpfc_sli4_if6_eq_release;
+ phba->sli4_hba.sli4_cq_release = lpfc_sli4_if6_cq_release;
+ break;
+ default:
+ break;
+ }
+
return 0;
out_iounmap_all:
@@ -9566,6 +9703,10 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
case LPFC_SLI_INTF_IF_TYPE_2:
iounmap(phba->sli4_hba.conf_regs_memmap_p);
break;
+ case LPFC_SLI_INTF_IF_TYPE_6:
+ iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+ iounmap(phba->sli4_hba.conf_regs_memmap_p);
+ break;
case LPFC_SLI_INTF_IF_TYPE_1:
default:
dev_printk(KERN_ERR, &phba->pcidev->dev,
@@ -10435,6 +10576,8 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
sli4_params->mqv = bf_get(cfg_mqv, mbx_sli4_parameters);
sli4_params->wqv = bf_get(cfg_wqv, mbx_sli4_parameters);
sli4_params->rqv = bf_get(cfg_rqv, mbx_sli4_parameters);
+ sli4_params->eqav = bf_get(cfg_eqav, mbx_sli4_parameters);
+ sli4_params->cqav = bf_get(cfg_cqav, mbx_sli4_parameters);
sli4_params->wqsize = bf_get(cfg_wqsize, mbx_sli4_parameters);
sli4_params->sgl_pages_max = bf_get(cfg_sgl_page_cnt,
mbx_sli4_parameters);
@@ -10465,8 +10608,32 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP;
}
- if (bf_get(cfg_xib, mbx_sli4_parameters) && phba->cfg_suppress_rsp)
+ /* Only embed PBDE for if_type 6 */
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+ LPFC_SLI_INTF_IF_TYPE_6) {
+ phba->fcp_embed_pbde = 1;
+ phba->nvme_embed_pbde = 1;
+ }
+
+ /* PBDE support requires xib be set */
+ if (!bf_get(cfg_xib, mbx_sli4_parameters)) {
+ phba->fcp_embed_pbde = 0;
+ phba->nvme_embed_pbde = 0;
+ }
+
+ /*
+ * To support Suppress Response feature we must satisfy 3 conditions.
+ * lpfc_suppress_rsp module parameter must be set (default).
+ * In SLI4-Parameters Descriptor:
+ * Extended Inline Buffers (XIB) must be supported.
+ * Suppress Response IU Not Supported (SRIUNS) must NOT be supported
+ * (double negative).
+ */
+ if (phba->cfg_suppress_rsp && bf_get(cfg_xib, mbx_sli4_parameters) &&
+ !(bf_get(cfg_nosr, mbx_sli4_parameters)))
phba->sli.sli_flag |= LPFC_SLI_SUPPRESS_RSP;
+ else
+ phba->cfg_suppress_rsp = 0;
if (bf_get(cfg_eqdr, mbx_sli4_parameters))
phba->sli.sli_flag |= LPFC_SLI_USE_EQDR;
@@ -10476,15 +10643,28 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE;
/*
- * Issue IOs with CDB embedded in WQE to minimized the number
- * of DMAs the firmware has to do. Setting this to 1 also forces
- * the driver to use 128 bytes WQEs for FCP IOs.
+ * Check whether the adapter supports an embedded copy of the
+ * FCP CMD IU within the WQE for FCP_Ixxx commands. In order
+ * to use this option, 128-byte WQEs must be used.
*/
if (bf_get(cfg_ext_embed_cb, mbx_sli4_parameters))
phba->fcp_embed_io = 1;
else
phba->fcp_embed_io = 0;
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_NVME,
+ "6422 XIB %d: FCP %d %d NVME %d %d %d %d\n",
+ bf_get(cfg_xib, mbx_sli4_parameters),
+ phba->fcp_embed_pbde, phba->fcp_embed_io,
+ phba->nvme_support, phba->nvme_embed_pbde,
+ phba->cfg_nvme_embed_cmd, phba->cfg_suppress_rsp);
+
+ if ((bf_get(cfg_cqpsize, mbx_sli4_parameters) & LPFC_CQ_16K_PAGE_SZ) &&
+ (bf_get(cfg_wqpsize, mbx_sli4_parameters) & LPFC_WQ_16K_PAGE_SZ) &&
+ (sli4_params->wqsize & LPFC_WQ_SZ128_SUPPORT))
+ phba->enab_exp_wqcq_pages = 1;
+ else
+ phba->enab_exp_wqcq_pages = 0;
/*
* Check if the SLI port supports MDS Diagnostics
*/
@@ -11137,6 +11317,27 @@ lpfc_sli4_get_iocb_cnt(struct lpfc_hba *phba)
}
+static void
+lpfc_log_write_firmware_error(struct lpfc_hba *phba, uint32_t offset,
+ uint32_t magic_number, uint32_t ftype, uint32_t fid, uint32_t fsize,
+ const struct firmware *fw)
+{
+ if (offset == ADD_STATUS_FW_NOT_SUPPORTED)
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3030 This firmware version is not supported on "
+ "this HBA model. Device:%x Magic:%x Type:%x "
+ "ID:%x Size %d %zd\n",
+ phba->pcidev->device, magic_number, ftype, fid,
+ fsize, fw->size);
+ else
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3022 FW Download failed. Device:%x Magic:%x Type:%x "
+ "ID:%x Size %d %zd\n",
+ phba->pcidev->device, magic_number, ftype, fid,
+ fsize, fw->size);
+}
+
+
/**
* lpfc_write_firmware - attempt to write a firmware image to the port
* @fw: pointer to firmware image returned from request_firmware.
@@ -11164,20 +11365,10 @@ lpfc_write_firmware(const struct firmware *fw, void *context)
magic_number = be32_to_cpu(image->magic_number);
ftype = bf_get_be32(lpfc_grp_hdr_file_type, image);
- fid = bf_get_be32(lpfc_grp_hdr_id, image),
+ fid = bf_get_be32(lpfc_grp_hdr_id, image);
fsize = be32_to_cpu(image->size);
INIT_LIST_HEAD(&dma_buffer_list);
- if ((magic_number != LPFC_GROUP_OJECT_MAGIC_G5 &&
- magic_number != LPFC_GROUP_OJECT_MAGIC_G6) ||
- ftype != LPFC_FILE_TYPE_GROUP || fsize != fw->size) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "3022 Invalid FW image found. "
- "Magic:%x Type:%x ID:%x Size %d %zd\n",
- magic_number, ftype, fid, fsize, fw->size);
- rc = -EINVAL;
- goto release_out;
- }
lpfc_decode_firmware_rev(phba, fwrev, 1);
if (strncmp(fwrev, image->revision, strnlen(image->revision, 16))) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -11218,11 +11409,18 @@ lpfc_write_firmware(const struct firmware *fw, void *context)
}
rc = lpfc_wr_object(phba, &dma_buffer_list,
(fw->size - offset), &offset);
- if (rc)
+ if (rc) {
+ lpfc_log_write_firmware_error(phba, offset,
+ magic_number, ftype, fid, fsize, fw);
goto release_out;
+ }
}
rc = offset;
- }
+ } else
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3029 Skipped Firmware update, Current "
+ "Version:%s New Version:%s\n",
+ fwrev, image->revision);
release_out:
list_for_each_entry_safe(dmabuf, next, &dma_buffer_list, list) {
@@ -11253,7 +11451,7 @@ lpfc_sli4_request_firmware_update(struct lpfc_hba *phba, uint8_t fw_upgrade)
const struct firmware *fw;
/* Only supported on SLI4 interface type 2 for now */
- if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
LPFC_SLI_INTF_IF_TYPE_2)
return -EPERM;
@@ -11493,13 +11691,6 @@ lpfc_pci_remove_one_s4(struct pci_dev *pdev)
/* Remove FC host and then SCSI host with the physical port */
fc_remove_host(shost);
scsi_remove_host(shost);
- /*
- * Bring down the SLI Layer. This step disables all interrupts,
- * clears the rings, discards all mailbox commands, and resets
- * the HBA FCoE function.
- */
- lpfc_debugfs_terminate(vport);
- lpfc_sli4_hba_unset(phba);
/* Perform ndlp cleanup on the physical port. The nvme and nvmet
* localports are destroyed after to cleanup all transport memory.
@@ -11508,6 +11699,13 @@ lpfc_pci_remove_one_s4(struct pci_dev *pdev)
lpfc_nvmet_destroy_targetport(phba);
lpfc_nvme_destroy_localport(vport);
+ /*
+ * Bring down the SLI Layer. This step disables all interrupts,
+ * clears the rings, discards all mailbox commands, and resets
+ * the HBA FCoE function.
+ */
+ lpfc_debugfs_terminate(vport);
+ lpfc_sli4_hba_unset(phba);
lpfc_stop_hba_timers(phba);
spin_lock_irq(&phba->hbalock);
@@ -12227,6 +12425,7 @@ int
lpfc_fof_queue_create(struct lpfc_hba *phba)
{
struct lpfc_queue *qdesc;
+ uint32_t wqesize;
/* Create FOF EQ */
qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
@@ -12235,12 +12434,13 @@ lpfc_fof_queue_create(struct lpfc_hba *phba)
if (!qdesc)
goto out_error;
+ qdesc->qe_valid = 1;
phba->sli4_hba.fof_eq = qdesc;
if (phba->cfg_fof) {
/* Create OAS CQ */
- if (phba->fcp_embed_io)
+ if (phba->enab_exp_wqcq_pages)
qdesc = lpfc_sli4_queue_alloc(phba,
LPFC_EXPANDED_PAGE_SIZE,
phba->sli4_hba.cq_esize,
@@ -12253,19 +12453,23 @@ lpfc_fof_queue_create(struct lpfc_hba *phba)
if (!qdesc)
goto out_error;
+ qdesc->qe_valid = 1;
phba->sli4_hba.oas_cq = qdesc;
/* Create OAS WQ */
- if (phba->fcp_embed_io)
+ if (phba->enab_exp_wqcq_pages) {
+ wqesize = (phba->fcp_embed_io) ?
+ LPFC_WQE128_SIZE : phba->sli4_hba.wq_esize;
qdesc = lpfc_sli4_queue_alloc(phba,
LPFC_EXPANDED_PAGE_SIZE,
- LPFC_WQE128_SIZE,
+ wqesize,
LPFC_WQE_EXP_COUNT);
- else
+ } else
qdesc = lpfc_sli4_queue_alloc(phba,
LPFC_DEFAULT_PAGE_SIZE,
phba->sli4_hba.wq_esize,
phba->sli4_hba.wq_ecount);
+
if (!qdesc)
goto out_error;
@@ -12379,6 +12583,8 @@ lpfc_init(void)
fc_release_transport(lpfc_transport_template);
return -ENOMEM;
}
+ lpfc_nvme_cmd_template();
+ lpfc_nvmet_cmd_template();
/* Initialize in case vector mapping is needed */
lpfc_used_cpu = NULL;
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 81fb92967b11..47c02da11f01 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -557,6 +557,10 @@ lpfc_init_link(struct lpfc_hba * phba,
mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED;
mb->un.varInitLnk.link_speed = LINK_SPEED_32G;
break;
+ case LPFC_USER_LINK_SPEED_64G:
+ mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED;
+ mb->un.varInitLnk.link_speed = LINK_SPEED_64G;
+ break;
case LPFC_USER_LINK_SPEED_AUTO:
default:
mb->un.varInitLnk.link_speed = LINK_SPEED_AUTO;
@@ -2170,10 +2174,8 @@ lpfc_reg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport, dma_addr_t phys)
/* Only FC supports upd bit */
if ((phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_FC) &&
(vport->fc_flag & FC_VFI_REGISTERED) &&
- (!phba->fc_topology_changed)) {
- bf_set(lpfc_reg_vfi_vp, reg_vfi, 0);
+ (!phba->fc_topology_changed))
bf_set(lpfc_reg_vfi_upd, reg_vfi, 1);
- }
bf_set(lpfc_reg_vfi_bbcr, reg_vfi, 0);
bf_set(lpfc_reg_vfi_bbscn, reg_vfi, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 87c08ff37ddd..41361662ff08 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -753,12 +753,16 @@ lpfc_rq_buf_free(struct lpfc_hba *phba, struct lpfc_dmabuf *mp)
drqe.address_hi = putPaddrHigh(rqb_entry->dbuf.phys);
rc = lpfc_sli4_rq_put(rqb_entry->hrq, rqb_entry->drq, &hrqe, &drqe);
if (rc < 0) {
+ (rqbp->rqb_free_buffer)(phba, rqb_entry);
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "6409 Cannot post to RQ %d: %x %x\n",
+ "6409 Cannot post to HRQ %d: %x %x %x "
+ "DRQ %x %x\n",
rqb_entry->hrq->queue_id,
rqb_entry->hrq->host_index,
- rqb_entry->hrq->hba_index);
- (rqbp->rqb_free_buffer)(phba, rqb_entry);
+ rqb_entry->hrq->hba_index,
+ rqb_entry->hrq->entry_count,
+ rqb_entry->drq->host_index,
+ rqb_entry->drq->hba_index);
} else {
list_add_tail(&rqb_entry->hbuf.list, &rqbp->rqb_buffer_list);
rqbp->buffer_count++;
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index d841aa42f607..022060636ae1 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1,7 +1,7 @@
- /*******************************************************************
+/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -1998,8 +1998,14 @@ lpfc_cmpl_prli_prli_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_type |= NLP_NVME_TARGET;
if (bf_get_be32(prli_disc, nvpr))
ndlp->nlp_type |= NLP_NVME_DISCOVERY;
+
+ /*
+ * If prli_fba is set, the Target supports FirstBurst.
+ * If prli_fb_sz is 0, the FirstBurst size is unlimited,
+ * otherwise it defines the actual size supported by
+ * the NVME Target.
+ */
if ((bf_get_be32(prli_fba, nvpr) == 1) &&
- (bf_get_be32(prli_fb_sz, nvpr) > 0) &&
(phba->cfg_nvme_enable_fb) &&
(!phba->nvmet_support)) {
/* Both sides support FB. The target's first
@@ -2008,12 +2014,16 @@ lpfc_cmpl_prli_prli_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_flag |= NLP_FIRSTBURST;
ndlp->nvme_fb_size = bf_get_be32(prli_fb_sz,
nvpr);
+
+ /* Expressed in units of 512 bytes */
+ if (ndlp->nvme_fb_size)
+ ndlp->nvme_fb_size <<=
+ LPFC_NVME_FB_SHIFT;
+ else
+ ndlp->nvme_fb_size = LPFC_NVME_MAX_FB;
}
}
- if (bf_get_be32(prli_recov, nvpr))
- ndlp->nlp_fcp_info |= NLP_FCP_2_DEVICE;
-
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
"6029 NVME PRLI Cmpl w1 x%08x "
"w4 x%08x w5 x%08x flag x%x, "
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index 81e3a4f10c3c..378dca40ca20 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -65,6 +65,136 @@ lpfc_release_nvme_buf(struct lpfc_hba *, struct lpfc_nvme_buf *);
static struct nvme_fc_port_template lpfc_nvme_template;
+static union lpfc_wqe128 lpfc_iread_cmd_template;
+static union lpfc_wqe128 lpfc_iwrite_cmd_template;
+static union lpfc_wqe128 lpfc_icmnd_cmd_template;
+
+/* Setup WQE templates for NVME IOs */
+void
+lpfc_nvme_cmd_template(void)
+{
+ union lpfc_wqe128 *wqe;
+
+ /* IREAD template */
+ wqe = &lpfc_iread_cmd_template;
+ memset(wqe, 0, sizeof(union lpfc_wqe128));
+
+ /* Word 0, 1, 2 - BDE is variable */
+
+ /* Word 3 - cmd_buff_len, payload_offset_len is zero */
+
+ /* Word 4 - total_xfer_len is variable */
+
+ /* Word 5 - is zero */
+
+ /* Word 6 - ctxt_tag, xri_tag is variable */
+
+ /* Word 7 */
+ bf_set(wqe_cmnd, &wqe->fcp_iread.wqe_com, CMD_FCP_IREAD64_WQE);
+ bf_set(wqe_pu, &wqe->fcp_iread.wqe_com, PARM_READ_CHECK);
+ bf_set(wqe_class, &wqe->fcp_iread.wqe_com, CLASS3);
+ bf_set(wqe_ct, &wqe->fcp_iread.wqe_com, SLI4_CT_RPI);
+
+ /* Word 8 - abort_tag is variable */
+
+ /* Word 9 - reqtag is variable */
+
+ /* Word 10 - dbde, wqes is variable */
+ bf_set(wqe_qosd, &wqe->fcp_iread.wqe_com, 0);
+ bf_set(wqe_nvme, &wqe->fcp_iread.wqe_com, 1);
+ bf_set(wqe_iod, &wqe->fcp_iread.wqe_com, LPFC_WQE_IOD_READ);
+ bf_set(wqe_lenloc, &wqe->fcp_iread.wqe_com, LPFC_WQE_LENLOC_WORD4);
+ bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 0);
+ bf_set(wqe_wqes, &wqe->fcp_iread.wqe_com, 1);
+
+ /* Word 11 - pbde is variable */
+ bf_set(wqe_cmd_type, &wqe->fcp_iread.wqe_com, NVME_READ_CMD);
+ bf_set(wqe_cqid, &wqe->fcp_iread.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
+ bf_set(wqe_pbde, &wqe->fcp_iread.wqe_com, 1);
+
+ /* Word 12 - is zero */
+
+ /* Word 13, 14, 15 - PBDE is variable */
+
+ /* IWRITE template */
+ wqe = &lpfc_iwrite_cmd_template;
+ memset(wqe, 0, sizeof(union lpfc_wqe128));
+
+ /* Word 0, 1, 2 - BDE is variable */
+
+ /* Word 3 - cmd_buff_len, payload_offset_len is zero */
+
+ /* Word 4 - total_xfer_len is variable */
+
+ /* Word 5 - initial_xfer_len is variable */
+
+ /* Word 6 - ctxt_tag, xri_tag is variable */
+
+ /* Word 7 */
+ bf_set(wqe_cmnd, &wqe->fcp_iwrite.wqe_com, CMD_FCP_IWRITE64_WQE);
+ bf_set(wqe_pu, &wqe->fcp_iwrite.wqe_com, PARM_READ_CHECK);
+ bf_set(wqe_class, &wqe->fcp_iwrite.wqe_com, CLASS3);
+ bf_set(wqe_ct, &wqe->fcp_iwrite.wqe_com, SLI4_CT_RPI);
+
+ /* Word 8 - abort_tag is variable */
+
+ /* Word 9 - reqtag is variable */
+
+ /* Word 10 - dbde, wqes is variable */
+ bf_set(wqe_qosd, &wqe->fcp_iwrite.wqe_com, 0);
+ bf_set(wqe_nvme, &wqe->fcp_iwrite.wqe_com, 1);
+ bf_set(wqe_iod, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_IOD_WRITE);
+ bf_set(wqe_lenloc, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_LENLOC_WORD4);
+ bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 0);
+ bf_set(wqe_wqes, &wqe->fcp_iwrite.wqe_com, 1);
+
+ /* Word 11 - pbde is variable */
+ bf_set(wqe_cmd_type, &wqe->fcp_iwrite.wqe_com, NVME_WRITE_CMD);
+ bf_set(wqe_cqid, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
+ bf_set(wqe_pbde, &wqe->fcp_iwrite.wqe_com, 1);
+
+ /* Word 12 - is zero */
+
+ /* Word 13, 14, 15 - PBDE is variable */
+
+ /* ICMND template */
+ wqe = &lpfc_icmnd_cmd_template;
+ memset(wqe, 0, sizeof(union lpfc_wqe128));
+
+ /* Word 0, 1, 2 - BDE is variable */
+
+ /* Word 3 - payload_offset_len is variable */
+
+ /* Word 4, 5 - is zero */
+
+ /* Word 6 - ctxt_tag, xri_tag is variable */
+
+ /* Word 7 */
+ bf_set(wqe_cmnd, &wqe->fcp_icmd.wqe_com, CMD_FCP_ICMND64_WQE);
+ bf_set(wqe_pu, &wqe->fcp_icmd.wqe_com, 0);
+ bf_set(wqe_class, &wqe->fcp_icmd.wqe_com, CLASS3);
+ bf_set(wqe_ct, &wqe->fcp_icmd.wqe_com, SLI4_CT_RPI);
+
+ /* Word 8 - abort_tag is variable */
+
+ /* Word 9 - reqtag is variable */
+
+ /* Word 10 - dbde, wqes is variable */
+ bf_set(wqe_qosd, &wqe->fcp_icmd.wqe_com, 1);
+ bf_set(wqe_nvme, &wqe->fcp_icmd.wqe_com, 1);
+ bf_set(wqe_iod, &wqe->fcp_icmd.wqe_com, LPFC_WQE_IOD_NONE);
+ bf_set(wqe_lenloc, &wqe->fcp_icmd.wqe_com, LPFC_WQE_LENLOC_NONE);
+ bf_set(wqe_dbde, &wqe->fcp_icmd.wqe_com, 0);
+ bf_set(wqe_wqes, &wqe->fcp_icmd.wqe_com, 1);
+
+ /* Word 11 */
+ bf_set(wqe_cmd_type, &wqe->fcp_icmd.wqe_com, FCP_COMMAND);
+ bf_set(wqe_cqid, &wqe->fcp_icmd.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
+ bf_set(wqe_pbde, &wqe->fcp_icmd.wqe_com, 0);
+
+ /* Word 12, 13, 14, 15 - is zero */
+}
+
/**
* lpfc_nvme_create_queue -
* @lpfc_pnvme: Pointer to the driver's nvme instance data
@@ -241,10 +371,11 @@ lpfc_nvme_cmpl_gen_req(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
ndlp = (struct lpfc_nodelist *)cmdwqe->context1;
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
"6047 nvme cmpl Enter "
- "Data %p DID %x Xri: %x status %x cmd:%p lsreg:%p "
- "bmp:%p ndlp:%p\n",
+ "Data %p DID %x Xri: %x status %x reason x%x cmd:%p "
+ "lsreg:%p bmp:%p ndlp:%p\n",
pnvme_lsreq, ndlp ? ndlp->nlp_DID : 0,
cmdwqe->sli4_xritag, status,
+ (wcqe->parameter & 0xffff),
cmdwqe, pnvme_lsreq, cmdwqe->context3, ndlp);
lpfc_nvmeio_data(phba, "NVME LS CMPL: xri x%x stat x%x parm x%x\n",
@@ -274,14 +405,14 @@ lpfc_nvme_cmpl_gen_req(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
static int
lpfc_nvme_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
struct lpfc_dmabuf *inp,
- struct nvmefc_ls_req *pnvme_lsreq,
- void (*cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
- struct lpfc_wcqe_complete *),
- struct lpfc_nodelist *ndlp, uint32_t num_entry,
- uint32_t tmo, uint8_t retry)
+ struct nvmefc_ls_req *pnvme_lsreq,
+ void (*cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
+ struct lpfc_wcqe_complete *),
+ struct lpfc_nodelist *ndlp, uint32_t num_entry,
+ uint32_t tmo, uint8_t retry)
{
- struct lpfc_hba *phba = vport->phba;
- union lpfc_wqe *wqe;
+ struct lpfc_hba *phba = vport->phba;
+ union lpfc_wqe128 *wqe;
struct lpfc_iocbq *genwqe;
struct ulp_bde64 *bpl;
struct ulp_bde64 bde;
@@ -419,6 +550,7 @@ lpfc_nvme_ls_req(struct nvme_fc_local_port *pnvme_lport,
{
int ret = 0;
struct lpfc_nvme_lport *lport;
+ struct lpfc_nvme_rport *rport;
struct lpfc_vport *vport;
struct lpfc_nodelist *ndlp;
struct ulp_bde64 *bpl;
@@ -437,19 +569,18 @@ lpfc_nvme_ls_req(struct nvme_fc_local_port *pnvme_lport,
*/
lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
+ rport = (struct lpfc_nvme_rport *)pnvme_rport->private;
vport = lport->vport;
if (vport->load_flag & FC_UNLOADING)
return -ENODEV;
- if (vport->load_flag & FC_UNLOADING)
- return -ENODEV;
-
- ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
+ /* Need the ndlp. It is stored in the driver's rport. */
+ ndlp = rport->ndlp;
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
- "6051 DID x%06x not an active rport.\n",
- pnvme_rport->port_id);
+ "6051 Remoteport %p, rport has invalid ndlp. "
+ "Failing LS Req\n", pnvme_rport);
return -ENODEV;
}
@@ -500,8 +631,9 @@ lpfc_nvme_ls_req(struct nvme_fc_local_port *pnvme_lport,
/* Expand print to include key fields. */
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
- "6149 ENTER. lport %p, rport %p lsreq%p rqstlen:%d "
- "rsplen:%d %pad %pad\n",
+ "6149 Issue LS Req to DID 0x%06x lport %p, rport %p "
+ "lsreq%p rqstlen:%d rsplen:%d %pad %pad\n",
+ ndlp->nlp_DID,
pnvme_lport, pnvme_rport,
pnvme_lsreq, pnvme_lsreq->rqstlen,
pnvme_lsreq->rsplen, &pnvme_lsreq->rqstdma,
@@ -517,7 +649,7 @@ lpfc_nvme_ls_req(struct nvme_fc_local_port *pnvme_lport,
ndlp, 2, 30, 0);
if (ret != WQE_SUCCESS) {
atomic_inc(&lport->xmt_ls_err);
- lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
"6052 EXIT. issue ls wqe failed lport %p, "
"rport %p lsreq%p Status %x DID %x\n",
pnvme_lport, pnvme_rport, pnvme_lsreq,
@@ -610,16 +742,25 @@ lpfc_nvme_ls_abort(struct nvme_fc_local_port *pnvme_lport,
}
/* Fix up the existing sgls for NVME IO. */
-static void
+static inline void
lpfc_nvme_adj_fcp_sgls(struct lpfc_vport *vport,
struct lpfc_nvme_buf *lpfc_ncmd,
struct nvmefc_fcp_req *nCmd)
{
+ struct lpfc_hba *phba = vport->phba;
struct sli4_sge *sgl;
union lpfc_wqe128 *wqe;
uint32_t *wptr, *dptr;
/*
+ * Get a local pointer to the built-in wqe and correct
+ * the cmd size to match NVME's 96 bytes and fix
+ * the dma address.
+ */
+
+ wqe = &lpfc_ncmd->cur_iocbq.wqe;
+
+ /*
* Adjust the FCP_CMD and FCP_RSP DMA data and sge_len to
* match NVME. NVME sends 96 bytes. Also, use the
* nvme commands command and response dma addresses
@@ -628,6 +769,60 @@ lpfc_nvme_adj_fcp_sgls(struct lpfc_vport *vport,
*/
sgl = lpfc_ncmd->nvme_sgl;
sgl->sge_len = cpu_to_le32(nCmd->cmdlen);
+ if (phba->cfg_nvme_embed_cmd) {
+ sgl->addr_hi = 0;
+ sgl->addr_lo = 0;
+
+ /* Word 0-2 - NVME CMND IU (embedded payload) */
+ wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_IMMED;
+ wqe->generic.bde.tus.f.bdeSize = 56;
+ wqe->generic.bde.addrHigh = 0;
+ wqe->generic.bde.addrLow = 64; /* Word 16 */
+
+ /* Word 10 - dbde is 0, wqes is 1 in template */
+
+ /*
+ * Embed the payload in the last half of the WQE
+ * WQE words 16-30 get the NVME CMD IU payload
+ *
+ * WQE words 16-19 get payload Words 1-4
+ * WQE words 20-21 get payload Words 6-7
+ * WQE words 22-29 get payload Words 16-23
+ */
+ wptr = &wqe->words[16]; /* WQE ptr */
+ dptr = (uint32_t *)nCmd->cmdaddr; /* payload ptr */
+ dptr++; /* Skip Word 0 in payload */
+
+ *wptr++ = *dptr++; /* Word 1 */
+ *wptr++ = *dptr++; /* Word 2 */
+ *wptr++ = *dptr++; /* Word 3 */
+ *wptr++ = *dptr++; /* Word 4 */
+ dptr++; /* Skip Word 5 in payload */
+ *wptr++ = *dptr++; /* Word 6 */
+ *wptr++ = *dptr++; /* Word 7 */
+ dptr += 8; /* Skip Words 8-15 in payload */
+ *wptr++ = *dptr++; /* Word 16 */
+ *wptr++ = *dptr++; /* Word 17 */
+ *wptr++ = *dptr++; /* Word 18 */
+ *wptr++ = *dptr++; /* Word 19 */
+ *wptr++ = *dptr++; /* Word 20 */
+ *wptr++ = *dptr++; /* Word 21 */
+ *wptr++ = *dptr++; /* Word 22 */
+ *wptr = *dptr; /* Word 23 */
+ } else {
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(nCmd->cmddma));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(nCmd->cmddma));
+
+ /* Word 0-2 - NVME CMND IU Inline BDE */
+ wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ wqe->generic.bde.tus.f.bdeSize = nCmd->cmdlen;
+ wqe->generic.bde.addrHigh = sgl->addr_hi;
+ wqe->generic.bde.addrLow = sgl->addr_lo;
+
+ /* Word 10 */
+ bf_set(wqe_dbde, &wqe->generic.wqe_com, 1);
+ bf_set(wqe_wqes, &wqe->generic.wqe_com, 0);
+ }
sgl++;
@@ -641,58 +836,6 @@ lpfc_nvme_adj_fcp_sgls(struct lpfc_vport *vport,
bf_set(lpfc_sli4_sge_last, sgl, 1);
sgl->word2 = cpu_to_le32(sgl->word2);
sgl->sge_len = cpu_to_le32(nCmd->rsplen);
-
- /*
- * Get a local pointer to the built-in wqe and correct
- * the cmd size to match NVME's 96 bytes and fix
- * the dma address.
- */
-
- /* 128 byte wqe support here */
- wqe = (union lpfc_wqe128 *)&lpfc_ncmd->cur_iocbq.wqe;
-
- /* Word 0-2 - NVME CMND IU (embedded payload) */
- wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_IMMED;
- wqe->generic.bde.tus.f.bdeSize = 60;
- wqe->generic.bde.addrHigh = 0;
- wqe->generic.bde.addrLow = 64; /* Word 16 */
-
- /* Word 3 */
- bf_set(payload_offset_len, &wqe->fcp_icmd,
- (nCmd->rsplen + nCmd->cmdlen));
-
- /* Word 10 */
- bf_set(wqe_nvme, &wqe->fcp_icmd.wqe_com, 1);
- bf_set(wqe_wqes, &wqe->fcp_icmd.wqe_com, 1);
-
- /*
- * Embed the payload in the last half of the WQE
- * WQE words 16-30 get the NVME CMD IU payload
- *
- * WQE words 16-19 get payload Words 1-4
- * WQE words 20-21 get payload Words 6-7
- * WQE words 22-29 get payload Words 16-23
- */
- wptr = &wqe->words[16]; /* WQE ptr */
- dptr = (uint32_t *)nCmd->cmdaddr; /* payload ptr */
- dptr++; /* Skip Word 0 in payload */
-
- *wptr++ = *dptr++; /* Word 1 */
- *wptr++ = *dptr++; /* Word 2 */
- *wptr++ = *dptr++; /* Word 3 */
- *wptr++ = *dptr++; /* Word 4 */
- dptr++; /* Skip Word 5 in payload */
- *wptr++ = *dptr++; /* Word 6 */
- *wptr++ = *dptr++; /* Word 7 */
- dptr += 8; /* Skip Words 8-15 in payload */
- *wptr++ = *dptr++; /* Word 16 */
- *wptr++ = *dptr++; /* Word 17 */
- *wptr++ = *dptr++; /* Word 18 */
- *wptr++ = *dptr++; /* Word 19 */
- *wptr++ = *dptr++; /* Word 20 */
- *wptr++ = *dptr++; /* Word 21 */
- *wptr++ = *dptr++; /* Word 22 */
- *wptr = *dptr; /* Word 23 */
}
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
@@ -980,14 +1123,14 @@ out_err:
phba->cpucheck_cmpl_io[lpfc_ncmd->cpu]++;
}
#endif
- freqpriv = nCmd->private;
- freqpriv->nvme_buf = NULL;
/* NVME targets need completion held off until the abort exchange
* completes unless the NVME Rport is getting unregistered.
*/
if (!(lpfc_ncmd->flags & LPFC_SBUF_XBUSY)) {
+ freqpriv = nCmd->private;
+ freqpriv->nvme_buf = NULL;
nCmd->done(nCmd);
lpfc_ncmd->nvmeCmd = NULL;
}
@@ -1025,7 +1168,7 @@ lpfc_nvme_prep_io_cmd(struct lpfc_vport *vport,
struct lpfc_hba *phba = vport->phba;
struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd;
struct lpfc_iocbq *pwqeq = &(lpfc_ncmd->cur_iocbq);
- union lpfc_wqe128 *wqe = (union lpfc_wqe128 *)&pwqeq->wqe;
+ union lpfc_wqe128 *wqe = &pwqeq->wqe;
uint32_t req_len;
if (!pnode || !NLP_CHK_NODE_ACT(pnode))
@@ -1035,9 +1178,16 @@ lpfc_nvme_prep_io_cmd(struct lpfc_vport *vport,
* There are three possibilities here - use scatter-gather segment, use
* the single mapping, or neither.
*/
- wqe->fcp_iwrite.initial_xfer_len = 0;
if (nCmd->sg_cnt) {
if (nCmd->io_dir == NVMEFC_FCP_WRITE) {
+ /* From the iwrite template, initialize words 7 - 11 */
+ memcpy(&wqe->words[7],
+ &lpfc_iwrite_cmd_template.words[7],
+ sizeof(uint32_t) * 5);
+
+ /* Word 4 */
+ wqe->fcp_iwrite.total_xfer_len = nCmd->payload_length;
+
/* Word 5 */
if ((phba->cfg_nvme_enable_fb) &&
(pnode->nlp_flag & NLP_FIRSTBURST)) {
@@ -1048,69 +1198,28 @@ lpfc_nvme_prep_io_cmd(struct lpfc_vport *vport,
else
wqe->fcp_iwrite.initial_xfer_len =
pnode->nvme_fb_size;
+ } else {
+ wqe->fcp_iwrite.initial_xfer_len = 0;
}
-
- /* Word 7 */
- bf_set(wqe_cmnd, &wqe->generic.wqe_com,
- CMD_FCP_IWRITE64_WQE);
- bf_set(wqe_pu, &wqe->generic.wqe_com,
- PARM_READ_CHECK);
-
- /* Word 10 */
- bf_set(wqe_qosd, &wqe->fcp_iwrite.wqe_com, 0);
- bf_set(wqe_iod, &wqe->fcp_iwrite.wqe_com,
- LPFC_WQE_IOD_WRITE);
- bf_set(wqe_lenloc, &wqe->fcp_iwrite.wqe_com,
- LPFC_WQE_LENLOC_WORD4);
- if (phba->cfg_nvme_oas)
- bf_set(wqe_oas, &wqe->fcp_iwrite.wqe_com, 1);
-
- /* Word 11 */
- bf_set(wqe_cmd_type, &wqe->generic.wqe_com,
- NVME_WRITE_CMD);
-
atomic_inc(&phba->fc4NvmeOutputRequests);
} else {
- /* Word 7 */
- bf_set(wqe_cmnd, &wqe->generic.wqe_com,
- CMD_FCP_IREAD64_WQE);
- bf_set(wqe_pu, &wqe->generic.wqe_com,
- PARM_READ_CHECK);
-
- /* Word 10 */
- bf_set(wqe_qosd, &wqe->fcp_iread.wqe_com, 0);
- bf_set(wqe_iod, &wqe->fcp_iread.wqe_com,
- LPFC_WQE_IOD_READ);
- bf_set(wqe_lenloc, &wqe->fcp_iread.wqe_com,
- LPFC_WQE_LENLOC_WORD4);
- if (phba->cfg_nvme_oas)
- bf_set(wqe_oas, &wqe->fcp_iread.wqe_com, 1);
-
- /* Word 11 */
- bf_set(wqe_cmd_type, &wqe->generic.wqe_com,
- NVME_READ_CMD);
+ /* From the iread template, initialize words 7 - 11 */
+ memcpy(&wqe->words[7],
+ &lpfc_iread_cmd_template.words[7],
+ sizeof(uint32_t) * 5);
+
+ /* Word 4 */
+ wqe->fcp_iread.total_xfer_len = nCmd->payload_length;
+
+ /* Word 5 */
+ wqe->fcp_iread.rsrvd5 = 0;
atomic_inc(&phba->fc4NvmeInputRequests);
}
} else {
- /* Word 4 */
- wqe->fcp_icmd.rsrvd4 = 0;
-
- /* Word 7 */
- bf_set(wqe_cmnd, &wqe->generic.wqe_com, CMD_FCP_ICMND64_WQE);
- bf_set(wqe_pu, &wqe->generic.wqe_com, 0);
-
- /* Word 10 */
- bf_set(wqe_qosd, &wqe->fcp_icmd.wqe_com, 1);
- bf_set(wqe_iod, &wqe->fcp_icmd.wqe_com, LPFC_WQE_IOD_WRITE);
- bf_set(wqe_lenloc, &wqe->fcp_icmd.wqe_com,
- LPFC_WQE_LENLOC_NONE);
- if (phba->cfg_nvme_oas)
- bf_set(wqe_oas, &wqe->fcp_icmd.wqe_com, 1);
-
- /* Word 11 */
- bf_set(wqe_cmd_type, &wqe->generic.wqe_com, NVME_READ_CMD);
-
+ /* From the icmnd template, initialize words 4 - 11 */
+ memcpy(&wqe->words[4], &lpfc_icmnd_cmd_template.words[4],
+ sizeof(uint32_t) * 8);
atomic_inc(&phba->fc4NvmeControlRequests);
}
/*
@@ -1118,25 +1227,21 @@ lpfc_nvme_prep_io_cmd(struct lpfc_vport *vport,
* of the nvme_cmnd request_buffer
*/
+ /* Word 3 */
+ bf_set(payload_offset_len, &wqe->fcp_icmd,
+ (nCmd->rsplen + nCmd->cmdlen));
+
/* Word 6 */
bf_set(wqe_ctxt_tag, &wqe->generic.wqe_com,
phba->sli4_hba.rpi_ids[pnode->nlp_rpi]);
bf_set(wqe_xri_tag, &wqe->generic.wqe_com, pwqeq->sli4_xritag);
- /* Word 7 */
- /* Preserve Class data in the ndlp. */
- bf_set(wqe_class, &wqe->generic.wqe_com,
- (pnode->nlp_fcp_info & 0x0f));
-
/* Word 8 */
wqe->generic.wqe_com.abort_tag = pwqeq->iotag;
/* Word 9 */
bf_set(wqe_reqtag, &wqe->generic.wqe_com, pwqeq->iotag);
- /* Word 11 */
- bf_set(wqe_cqid, &wqe->generic.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
-
pwqeq->vport = vport;
return 0;
}
@@ -1164,10 +1269,11 @@ lpfc_nvme_prep_io_dma(struct lpfc_vport *vport,
{
struct lpfc_hba *phba = vport->phba;
struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd;
- union lpfc_wqe128 *wqe = (union lpfc_wqe128 *)&lpfc_ncmd->cur_iocbq.wqe;
+ union lpfc_wqe128 *wqe = &lpfc_ncmd->cur_iocbq.wqe;
struct sli4_sge *sgl = lpfc_ncmd->nvme_sgl;
struct scatterlist *data_sg;
struct sli4_sge *first_data_sgl;
+ struct ulp_bde64 *bde;
dma_addr_t physaddr;
uint32_t num_bde = 0;
uint32_t dma_len;
@@ -1235,7 +1341,26 @@ lpfc_nvme_prep_io_dma(struct lpfc_vport *vport,
data_sg = sg_next(data_sg);
sgl++;
}
+ if (phba->nvme_embed_pbde) {
+ /* Use PBDE support for first SGL only, offset == 0 */
+ /* Words 13-15 */
+ bde = (struct ulp_bde64 *)
+ &wqe->words[13];
+ bde->addrLow = first_data_sgl->addr_lo;
+ bde->addrHigh = first_data_sgl->addr_hi;
+ bde->tus.f.bdeSize =
+ le32_to_cpu(first_data_sgl->sge_len);
+ bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bde->tus.w = cpu_to_le32(bde->tus.w);
+ /* wqe_pbde is 1 in template */
+ } else {
+ memset(&wqe->words[13], 0, (sizeof(uint32_t) * 3));
+ bf_set(wqe_pbde, &wqe->generic.wqe_com, 0);
+ }
} else {
+ bf_set(wqe_pbde, &wqe->generic.wqe_com, 0);
+ memset(&wqe->words[13], 0, (sizeof(uint32_t) * 3));
+
/* For this clause to be valid, the payload_length
* and sg_cnt must zero.
*/
@@ -1247,12 +1372,6 @@ lpfc_nvme_prep_io_dma(struct lpfc_vport *vport,
return 1;
}
}
-
- /*
- * Due to difference in data length between DIF/non-DIF paths,
- * we need to set word 4 of WQE here
- */
- wqe->fcp_iread.total_xfer_len = nCmd->payload_length;
return 0;
}
@@ -1554,7 +1673,7 @@ lpfc_nvme_fcp_abort(struct nvme_fc_local_port *pnvme_lport,
struct lpfc_iocbq *abts_buf;
struct lpfc_iocbq *nvmereq_wqe;
struct lpfc_nvme_fcpreq_priv *freqpriv;
- union lpfc_wqe *abts_wqe;
+ union lpfc_wqe128 *abts_wqe;
unsigned long flags;
int ret_val;
@@ -2098,7 +2217,7 @@ lpfc_new_nvme_buf(struct lpfc_vport *vport, int num_to_alloc)
break;
}
pwqeq = &(lpfc_ncmd->cur_iocbq);
- wqe = (union lpfc_wqe128 *)&pwqeq->wqe;
+ wqe = &pwqeq->wqe;
/* Allocate iotag for lpfc_ncmd->cur_iocbq. */
iotag = lpfc_sli_next_iotag(phba, pwqeq);
@@ -2135,14 +2254,8 @@ lpfc_new_nvme_buf(struct lpfc_vport *vport, int num_to_alloc)
lpfc_ncmd->cur_iocbq.context1 = lpfc_ncmd;
- /* Word 7 */
- bf_set(wqe_erp, &wqe->generic.wqe_com, 0);
- /* NVME upper layers will time things out, if needed */
- bf_set(wqe_tmo, &wqe->generic.wqe_com, 0);
-
- /* Word 10 */
- bf_set(wqe_ebde_cnt, &wqe->generic.wqe_com, 0);
- bf_set(wqe_dbde, &wqe->generic.wqe_com, 1);
+ /* Initialize WQE */
+ memset(wqe, 0, sizeof(union lpfc_wqe));
/* add the nvme buffer to a post list */
list_add_tail(&lpfc_ncmd->list, &post_nblist);
diff --git a/drivers/scsi/lpfc/lpfc_nvme.h b/drivers/scsi/lpfc/lpfc_nvme.h
index e79f8f75758c..9216653e0441 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.h
+++ b/drivers/scsi/lpfc/lpfc_nvme.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -27,6 +27,8 @@
#define LPFC_NVME_WAIT_TMO 10
#define LPFC_NVME_EXPEDITE_XRICNT 8
+#define LPFC_NVME_FB_SHIFT 9
+#define LPFC_NVME_MAX_FB (1 << 20) /* 1M */
struct lpfc_nvme_qhandle {
uint32_t index; /* WQ index to use */
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c
index 8dbf5c9d51aa..7271c9d885dd 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.c
+++ b/drivers/scsi/lpfc/lpfc_nvmet.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channsel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -36,7 +36,7 @@
#include <scsi/scsi_transport_fc.h>
#include <scsi/fc/fc_fs.h>
-#include <../drivers/nvme/host/nvme.h>
+#include <linux/nvme.h>
#include <linux/nvme-fc-driver.h>
#include <linux/nvme-fc.h>
@@ -71,6 +71,151 @@ static int lpfc_nvmet_unsol_fcp_issue_abort(struct lpfc_hba *,
static int lpfc_nvmet_unsol_ls_issue_abort(struct lpfc_hba *,
struct lpfc_nvmet_rcv_ctx *,
uint32_t, uint16_t);
+static void lpfc_nvmet_wqfull_flush(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_nvmet_rcv_ctx *);
+
+static union lpfc_wqe128 lpfc_tsend_cmd_template;
+static union lpfc_wqe128 lpfc_treceive_cmd_template;
+static union lpfc_wqe128 lpfc_trsp_cmd_template;
+
+/* Setup WQE templates for NVME IOs */
+void
+lpfc_nvmet_cmd_template(void)
+{
+ union lpfc_wqe128 *wqe;
+
+ /* TSEND template */
+ wqe = &lpfc_tsend_cmd_template;
+ memset(wqe, 0, sizeof(union lpfc_wqe128));
+
+ /* Word 0, 1, 2 - BDE is variable */
+
+ /* Word 3 - payload_offset_len is zero */
+
+ /* Word 4 - relative_offset is variable */
+
+ /* Word 5 - is zero */
+
+ /* Word 6 - ctxt_tag, xri_tag is variable */
+
+ /* Word 7 - wqe_ar is variable */
+ bf_set(wqe_cmnd, &wqe->fcp_tsend.wqe_com, CMD_FCP_TSEND64_WQE);
+ bf_set(wqe_pu, &wqe->fcp_tsend.wqe_com, PARM_REL_OFF);
+ bf_set(wqe_class, &wqe->fcp_tsend.wqe_com, CLASS3);
+ bf_set(wqe_ct, &wqe->fcp_tsend.wqe_com, SLI4_CT_RPI);
+ bf_set(wqe_ar, &wqe->fcp_tsend.wqe_com, 1);
+
+ /* Word 8 - abort_tag is variable */
+
+ /* Word 9 - reqtag, rcvoxid is variable */
+
+ /* Word 10 - wqes, xc is variable */
+ bf_set(wqe_nvme, &wqe->fcp_tsend.wqe_com, 1);
+ bf_set(wqe_dbde, &wqe->fcp_tsend.wqe_com, 1);
+ bf_set(wqe_wqes, &wqe->fcp_tsend.wqe_com, 0);
+ bf_set(wqe_xc, &wqe->fcp_tsend.wqe_com, 1);
+ bf_set(wqe_iod, &wqe->fcp_tsend.wqe_com, LPFC_WQE_IOD_WRITE);
+ bf_set(wqe_lenloc, &wqe->fcp_tsend.wqe_com, LPFC_WQE_LENLOC_WORD12);
+
+ /* Word 11 - sup, irsp, irsplen is variable */
+ bf_set(wqe_cmd_type, &wqe->fcp_tsend.wqe_com, FCP_COMMAND_TSEND);
+ bf_set(wqe_cqid, &wqe->fcp_tsend.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
+ bf_set(wqe_sup, &wqe->fcp_tsend.wqe_com, 0);
+ bf_set(wqe_irsp, &wqe->fcp_tsend.wqe_com, 0);
+ bf_set(wqe_irsplen, &wqe->fcp_tsend.wqe_com, 0);
+ bf_set(wqe_pbde, &wqe->fcp_tsend.wqe_com, 0);
+
+ /* Word 12 - fcp_data_len is variable */
+
+ /* Word 13, 14, 15 - PBDE is zero */
+
+ /* TRECEIVE template */
+ wqe = &lpfc_treceive_cmd_template;
+ memset(wqe, 0, sizeof(union lpfc_wqe128));
+
+ /* Word 0, 1, 2 - BDE is variable */
+
+ /* Word 3 */
+ wqe->fcp_treceive.payload_offset_len = TXRDY_PAYLOAD_LEN;
+
+ /* Word 4 - relative_offset is variable */
+
+ /* Word 5 - is zero */
+
+ /* Word 6 - ctxt_tag, xri_tag is variable */
+
+ /* Word 7 */
+ bf_set(wqe_cmnd, &wqe->fcp_treceive.wqe_com, CMD_FCP_TRECEIVE64_WQE);
+ bf_set(wqe_pu, &wqe->fcp_treceive.wqe_com, PARM_REL_OFF);
+ bf_set(wqe_class, &wqe->fcp_treceive.wqe_com, CLASS3);
+ bf_set(wqe_ct, &wqe->fcp_treceive.wqe_com, SLI4_CT_RPI);
+ bf_set(wqe_ar, &wqe->fcp_treceive.wqe_com, 0);
+
+ /* Word 8 - abort_tag is variable */
+
+ /* Word 9 - reqtag, rcvoxid is variable */
+
+ /* Word 10 - xc is variable */
+ bf_set(wqe_dbde, &wqe->fcp_treceive.wqe_com, 1);
+ bf_set(wqe_wqes, &wqe->fcp_treceive.wqe_com, 0);
+ bf_set(wqe_nvme, &wqe->fcp_treceive.wqe_com, 1);
+ bf_set(wqe_iod, &wqe->fcp_treceive.wqe_com, LPFC_WQE_IOD_READ);
+ bf_set(wqe_lenloc, &wqe->fcp_treceive.wqe_com, LPFC_WQE_LENLOC_WORD12);
+ bf_set(wqe_xc, &wqe->fcp_tsend.wqe_com, 1);
+
+ /* Word 11 - pbde is variable */
+ bf_set(wqe_cmd_type, &wqe->fcp_treceive.wqe_com, FCP_COMMAND_TRECEIVE);
+ bf_set(wqe_cqid, &wqe->fcp_treceive.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
+ bf_set(wqe_sup, &wqe->fcp_treceive.wqe_com, 0);
+ bf_set(wqe_irsp, &wqe->fcp_treceive.wqe_com, 0);
+ bf_set(wqe_irsplen, &wqe->fcp_treceive.wqe_com, 0);
+ bf_set(wqe_pbde, &wqe->fcp_treceive.wqe_com, 1);
+
+ /* Word 12 - fcp_data_len is variable */
+
+ /* Word 13, 14, 15 - PBDE is variable */
+
+ /* TRSP template */
+ wqe = &lpfc_trsp_cmd_template;
+ memset(wqe, 0, sizeof(union lpfc_wqe128));
+
+ /* Word 0, 1, 2 - BDE is variable */
+
+ /* Word 3 - response_len is variable */
+
+ /* Word 4, 5 - is zero */
+
+ /* Word 6 - ctxt_tag, xri_tag is variable */
+
+ /* Word 7 */
+ bf_set(wqe_cmnd, &wqe->fcp_trsp.wqe_com, CMD_FCP_TRSP64_WQE);
+ bf_set(wqe_pu, &wqe->fcp_trsp.wqe_com, PARM_UNUSED);
+ bf_set(wqe_class, &wqe->fcp_trsp.wqe_com, CLASS3);
+ bf_set(wqe_ct, &wqe->fcp_trsp.wqe_com, SLI4_CT_RPI);
+ bf_set(wqe_ag, &wqe->fcp_trsp.wqe_com, 1); /* wqe_ar */
+
+ /* Word 8 - abort_tag is variable */
+
+ /* Word 9 - reqtag is variable */
+
+ /* Word 10 wqes, xc is variable */
+ bf_set(wqe_dbde, &wqe->fcp_trsp.wqe_com, 1);
+ bf_set(wqe_nvme, &wqe->fcp_trsp.wqe_com, 1);
+ bf_set(wqe_wqes, &wqe->fcp_trsp.wqe_com, 0);
+ bf_set(wqe_xc, &wqe->fcp_trsp.wqe_com, 0);
+ bf_set(wqe_iod, &wqe->fcp_trsp.wqe_com, LPFC_WQE_IOD_NONE);
+ bf_set(wqe_lenloc, &wqe->fcp_trsp.wqe_com, LPFC_WQE_LENLOC_WORD3);
+
+ /* Word 11 irsp, irsplen is variable */
+ bf_set(wqe_cmd_type, &wqe->fcp_trsp.wqe_com, FCP_COMMAND_TRSP);
+ bf_set(wqe_cqid, &wqe->fcp_trsp.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
+ bf_set(wqe_sup, &wqe->fcp_trsp.wqe_com, 0);
+ bf_set(wqe_irsp, &wqe->fcp_trsp.wqe_com, 0);
+ bf_set(wqe_irsplen, &wqe->fcp_trsp.wqe_com, 0);
+ bf_set(wqe_pbde, &wqe->fcp_trsp.wqe_com, 0);
+
+ /* Word 12, 13, 14, 15 - is zero */
+}
void
lpfc_nvmet_defer_release(struct lpfc_hba *phba, struct lpfc_nvmet_rcv_ctx *ctxp)
@@ -130,7 +275,7 @@ lpfc_nvmet_xmt_ls_rsp_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
if (tgtp) {
if (status) {
atomic_inc(&tgtp->xmt_ls_rsp_error);
- if (status == IOERR_ABORT_REQUESTED)
+ if (result == IOERR_ABORT_REQUESTED)
atomic_inc(&tgtp->xmt_ls_rsp_aborted);
if (bf_get(lpfc_wcqe_c_xb, wcqe))
atomic_inc(&tgtp->xmt_ls_rsp_xb_set);
@@ -268,8 +413,6 @@ lpfc_nvmet_ctxbuf_post(struct lpfc_hba *phba, struct lpfc_nvmet_ctxbuf *ctx_buf)
"NVMET RCV BUSY: xri x%x sz %d "
"from %06x\n",
oxid, size, sid);
- /* defer repost rcv buffer till .defer_rcv callback */
- ctxp->flag &= ~LPFC_NVMET_DEFER_RCV_REPOST;
atomic_inc(&tgtp->rcv_fcp_cmd_out);
return;
}
@@ -541,7 +684,7 @@ lpfc_nvmet_xmt_fcp_op_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
rsp->transferred_length = 0;
if (tgtp) {
atomic_inc(&tgtp->xmt_fcp_rsp_error);
- if (status == IOERR_ABORT_REQUESTED)
+ if (result == IOERR_ABORT_REQUESTED)
atomic_inc(&tgtp->xmt_fcp_rsp_aborted);
}
@@ -741,7 +884,10 @@ lpfc_nvmet_xmt_fcp_op(struct nvmet_fc_target_port *tgtport,
struct lpfc_nvmet_rcv_ctx *ctxp =
container_of(rsp, struct lpfc_nvmet_rcv_ctx, ctx.fcp_req);
struct lpfc_hba *phba = ctxp->phba;
+ struct lpfc_queue *wq;
struct lpfc_iocbq *nvmewqeq;
+ struct lpfc_sli_ring *pring;
+ unsigned long iflags;
int rc;
if (phba->pport->load_flag & FC_UNLOADING) {
@@ -820,6 +966,22 @@ lpfc_nvmet_xmt_fcp_op(struct nvmet_fc_target_port *tgtport,
return 0;
}
+ if (rc == -EBUSY) {
+ /*
+ * WQ was full, so queue nvmewqeq to be sent after
+ * WQE release CQE
+ */
+ ctxp->flag |= LPFC_NVMET_DEFER_WQFULL;
+ wq = phba->sli4_hba.nvme_wq[rsp->hwqid];
+ pring = wq->pring;
+ spin_lock_irqsave(&pring->ring_lock, iflags);
+ list_add_tail(&nvmewqeq->list, &wq->wqfull_list);
+ wq->q_flag |= HBA_NVMET_WQFULL;
+ spin_unlock_irqrestore(&pring->ring_lock, iflags);
+ atomic_inc(&lpfc_nvmep->defer_wqfull);
+ return 0;
+ }
+
/* Give back resources */
atomic_inc(&lpfc_nvmep->xmt_fcp_drop);
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
@@ -851,6 +1013,7 @@ lpfc_nvmet_xmt_fcp_abort(struct nvmet_fc_target_port *tgtport,
struct lpfc_nvmet_rcv_ctx *ctxp =
container_of(req, struct lpfc_nvmet_rcv_ctx, ctx.fcp_req);
struct lpfc_hba *phba = ctxp->phba;
+ struct lpfc_queue *wq;
unsigned long flags;
if (phba->pport->load_flag & FC_UNLOADING)
@@ -880,6 +1043,15 @@ lpfc_nvmet_xmt_fcp_abort(struct nvmet_fc_target_port *tgtport,
}
ctxp->flag |= LPFC_NVMET_ABORT_OP;
+ if (ctxp->flag & LPFC_NVMET_DEFER_WQFULL) {
+ lpfc_nvmet_unsol_fcp_issue_abort(phba, ctxp, ctxp->sid,
+ ctxp->oxid);
+ wq = phba->sli4_hba.nvme_wq[ctxp->wqeq->hba_wqidx];
+ spin_unlock_irqrestore(&ctxp->ctxlock, flags);
+ lpfc_nvmet_wqfull_flush(phba, wq, ctxp);
+ return;
+ }
+
/* An state of LPFC_NVMET_STE_RCV means we have just received
* the NVME command and have not started processing it.
* (by issuing any IO WQEs on this exchange yet)
@@ -946,11 +1118,9 @@ lpfc_nvmet_defer_rcv(struct nvmet_fc_target_port *tgtport,
tgtp = phba->targetport->private;
atomic_inc(&tgtp->rcv_fcp_cmd_defer);
- if (ctxp->flag & LPFC_NVMET_DEFER_RCV_REPOST)
- lpfc_rq_buf_free(phba, &nvmebuf->hbuf); /* repost */
- else
- nvmebuf->hrq->rqbp->rqb_free_buffer(phba, nvmebuf);
- ctxp->flag &= ~LPFC_NVMET_DEFER_RCV_REPOST;
+
+ /* Free the nvmebuf since a new buffer already replaced it */
+ nvmebuf->hrq->rqbp->rqb_free_buffer(phba, nvmebuf);
}
static struct nvmet_fc_target_template lpfc_tgttemplate = {
@@ -1124,16 +1294,10 @@ lpfc_nvmet_setup_io_context(struct lpfc_hba *phba)
}
ctx_buf->iocbq->iocb_flag = LPFC_IO_NVMET;
nvmewqe = ctx_buf->iocbq;
- wqe = (union lpfc_wqe128 *)&nvmewqe->wqe;
+ wqe = &nvmewqe->wqe;
+
/* Initialize WQE */
memset(wqe, 0, sizeof(union lpfc_wqe));
- /* Word 7 */
- bf_set(wqe_ct, &wqe->generic.wqe_com, SLI4_CT_RPI);
- bf_set(wqe_class, &wqe->generic.wqe_com, CLASS3);
- /* Word 10 */
- bf_set(wqe_nvme, &wqe->fcp_tsend.wqe_com, 1);
- bf_set(wqe_ebde_cnt, &wqe->generic.wqe_com, 0);
- bf_set(wqe_qosd, &wqe->generic.wqe_com, 0);
ctx_buf->iocbq->context1 = NULL;
spin_lock(&phba->sli4_hba.sgl_list_lock);
@@ -1280,6 +1444,9 @@ lpfc_nvmet_create_targetport(struct lpfc_hba *phba)
atomic_set(&tgtp->xmt_abort_sol, 0);
atomic_set(&tgtp->xmt_abort_rsp, 0);
atomic_set(&tgtp->xmt_abort_rsp_error, 0);
+ atomic_set(&tgtp->defer_ctx, 0);
+ atomic_set(&tgtp->defer_fod, 0);
+ atomic_set(&tgtp->defer_wqfull, 0);
}
return error;
}
@@ -1435,16 +1602,103 @@ lpfc_nvmet_rcv_unsol_abort(struct lpfc_vport *vport,
return 0;
}
+static void
+lpfc_nvmet_wqfull_flush(struct lpfc_hba *phba, struct lpfc_queue *wq,
+ struct lpfc_nvmet_rcv_ctx *ctxp)
+{
+ struct lpfc_sli_ring *pring;
+ struct lpfc_iocbq *nvmewqeq;
+ struct lpfc_iocbq *next_nvmewqeq;
+ unsigned long iflags;
+ struct lpfc_wcqe_complete wcqe;
+ struct lpfc_wcqe_complete *wcqep;
+
+ pring = wq->pring;
+ wcqep = &wcqe;
+
+ /* Fake an ABORT error code back to cmpl routine */
+ memset(wcqep, 0, sizeof(struct lpfc_wcqe_complete));
+ bf_set(lpfc_wcqe_c_status, wcqep, IOSTAT_LOCAL_REJECT);
+ wcqep->parameter = IOERR_ABORT_REQUESTED;
+
+ spin_lock_irqsave(&pring->ring_lock, iflags);
+ list_for_each_entry_safe(nvmewqeq, next_nvmewqeq,
+ &wq->wqfull_list, list) {
+ if (ctxp) {
+ /* Checking for a specific IO to flush */
+ if (nvmewqeq->context2 == ctxp) {
+ list_del(&nvmewqeq->list);
+ spin_unlock_irqrestore(&pring->ring_lock,
+ iflags);
+ lpfc_nvmet_xmt_fcp_op_cmp(phba, nvmewqeq,
+ wcqep);
+ return;
+ }
+ continue;
+ } else {
+ /* Flush all IOs */
+ list_del(&nvmewqeq->list);
+ spin_unlock_irqrestore(&pring->ring_lock, iflags);
+ lpfc_nvmet_xmt_fcp_op_cmp(phba, nvmewqeq, wcqep);
+ spin_lock_irqsave(&pring->ring_lock, iflags);
+ }
+ }
+ if (!ctxp)
+ wq->q_flag &= ~HBA_NVMET_WQFULL;
+ spin_unlock_irqrestore(&pring->ring_lock, iflags);
+}
+
+void
+lpfc_nvmet_wqfull_process(struct lpfc_hba *phba,
+ struct lpfc_queue *wq)
+{
+#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
+ struct lpfc_sli_ring *pring;
+ struct lpfc_iocbq *nvmewqeq;
+ unsigned long iflags;
+ int rc;
+
+ /*
+ * Some WQE slots are available, so try to re-issue anything
+ * on the WQ wqfull_list.
+ */
+ pring = wq->pring;
+ spin_lock_irqsave(&pring->ring_lock, iflags);
+ while (!list_empty(&wq->wqfull_list)) {
+ list_remove_head(&wq->wqfull_list, nvmewqeq, struct lpfc_iocbq,
+ list);
+ spin_unlock_irqrestore(&pring->ring_lock, iflags);
+ rc = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, nvmewqeq);
+ spin_lock_irqsave(&pring->ring_lock, iflags);
+ if (rc == -EBUSY) {
+ /* WQ was full again, so put it back on the list */
+ list_add(&nvmewqeq->list, &wq->wqfull_list);
+ spin_unlock_irqrestore(&pring->ring_lock, iflags);
+ return;
+ }
+ }
+ wq->q_flag &= ~HBA_NVMET_WQFULL;
+ spin_unlock_irqrestore(&pring->ring_lock, iflags);
+
+#endif
+}
+
void
lpfc_nvmet_destroy_targetport(struct lpfc_hba *phba)
{
#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
struct lpfc_nvmet_tgtport *tgtp;
+ struct lpfc_queue *wq;
+ uint32_t qidx;
if (phba->nvmet_support == 0)
return;
if (phba->targetport) {
tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
+ for (qidx = 0; qidx < phba->cfg_nvme_io_channel; qidx++) {
+ wq = phba->sli4_hba.nvme_wq[qidx];
+ lpfc_nvmet_wqfull_flush(phba, wq, NULL);
+ }
init_completion(&tgtp->tport_unreg_done);
nvmet_fc_unregister_targetport(phba->targetport);
wait_for_completion_timeout(&tgtp->tport_unreg_done, 5);
@@ -1694,6 +1948,8 @@ lpfc_nvmet_unsol_fcp_buffer(struct lpfc_hba *phba,
lpfc_nvmeio_data(phba, "NVMET FCP RCV: xri x%x sz %d CPU %02x\n",
oxid, size, smp_processor_id());
+ tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
+
if (!ctx_buf) {
/* Queue this NVME IO to process later */
spin_lock_irqsave(&phba->sli4_hba.nvmet_io_wait_lock, iflag);
@@ -1709,10 +1965,11 @@ lpfc_nvmet_unsol_fcp_buffer(struct lpfc_hba *phba,
lpfc_post_rq_buffer(
phba, phba->sli4_hba.nvmet_mrq_hdr[qno],
phba->sli4_hba.nvmet_mrq_data[qno], 1, qno);
+
+ atomic_inc(&tgtp->defer_ctx);
return;
}
- tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
payload = (uint32_t *)(nvmebuf->dbuf.virt);
sid = sli4_sid_from_fc_hdr(fc_hdr);
@@ -1776,12 +2033,20 @@ lpfc_nvmet_unsol_fcp_buffer(struct lpfc_hba *phba,
/* Processing of FCP command is deferred */
if (rc == -EOVERFLOW) {
+ /*
+ * Post a brand new DMA buffer to RQ and defer
+ * freeing rcv buffer till .defer_rcv callback
+ */
+ qno = nvmebuf->idx;
+ lpfc_post_rq_buffer(
+ phba, phba->sli4_hba.nvmet_mrq_hdr[qno],
+ phba->sli4_hba.nvmet_mrq_data[qno], 1, qno);
+
lpfc_nvmeio_data(phba,
"NVMET RCV BUSY: xri x%x sz %d from %06x\n",
oxid, size, sid);
- /* defer reposting rcv buffer till .defer_rcv callback */
- ctxp->flag |= LPFC_NVMET_DEFER_RCV_REPOST;
atomic_inc(&tgtp->rcv_fcp_cmd_out);
+ atomic_inc(&tgtp->defer_fod);
return;
}
ctxp->rqb_buffer = nvmebuf;
@@ -1897,7 +2162,7 @@ lpfc_nvmet_prep_ls_wqe(struct lpfc_hba *phba,
{
struct lpfc_nodelist *ndlp;
struct lpfc_iocbq *nvmewqe;
- union lpfc_wqe *wqe;
+ union lpfc_wqe128 *wqe;
if (!lpfc_is_link_up(phba)) {
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_DISC,
@@ -2023,9 +2288,11 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
struct lpfc_iocbq *nvmewqe;
struct scatterlist *sgel;
union lpfc_wqe128 *wqe;
+ struct ulp_bde64 *bde;
uint32_t *txrdy;
dma_addr_t physaddr;
int i, cnt;
+ int do_pbde;
int xc = 1;
if (!lpfc_is_link_up(phba)) {
@@ -2078,7 +2345,7 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
if (((ctxp->state == LPFC_NVMET_STE_RCV) &&
(ctxp->entry_cnt == 1)) ||
(ctxp->state == LPFC_NVMET_STE_DATA)) {
- wqe = (union lpfc_wqe128 *)&nvmewqe->wqe;
+ wqe = &nvmewqe->wqe;
} else {
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
"6111 Wrong state NVMET FCP: %d cnt %d\n",
@@ -2090,6 +2357,11 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
switch (rsp->op) {
case NVMET_FCOP_READDATA:
case NVMET_FCOP_READDATA_RSP:
+ /* From the tsend template, initialize words 7 - 11 */
+ memcpy(&wqe->words[7],
+ &lpfc_tsend_cmd_template.words[7],
+ sizeof(uint32_t) * 5);
+
/* Words 0 - 2 : The first sg segment */
sgel = &rsp->sg[0];
physaddr = sg_dma_address(sgel);
@@ -2106,6 +2378,7 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
wqe->fcp_tsend.relative_offset = ctxp->offset;
/* Word 5 */
+ wqe->fcp_tsend.reserved = 0;
/* Word 6 */
bf_set(wqe_ctxt_tag, &wqe->fcp_tsend.wqe_com,
@@ -2113,9 +2386,7 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
bf_set(wqe_xri_tag, &wqe->fcp_tsend.wqe_com,
nvmewqe->sli4_xritag);
- /* Word 7 */
- bf_set(wqe_pu, &wqe->fcp_tsend.wqe_com, 1);
- bf_set(wqe_cmnd, &wqe->fcp_tsend.wqe_com, CMD_FCP_TSEND64_WQE);
+ /* Word 7 - set ar later */
/* Word 8 */
wqe->fcp_tsend.wqe_com.abort_tag = nvmewqe->iotag;
@@ -2124,23 +2395,12 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
bf_set(wqe_reqtag, &wqe->fcp_tsend.wqe_com, nvmewqe->iotag);
bf_set(wqe_rcvoxid, &wqe->fcp_tsend.wqe_com, ctxp->oxid);
- /* Word 10 */
- bf_set(wqe_nvme, &wqe->fcp_tsend.wqe_com, 1);
- bf_set(wqe_dbde, &wqe->fcp_tsend.wqe_com, 1);
- bf_set(wqe_iod, &wqe->fcp_tsend.wqe_com, LPFC_WQE_IOD_WRITE);
- bf_set(wqe_lenloc, &wqe->fcp_tsend.wqe_com,
- LPFC_WQE_LENLOC_WORD12);
- bf_set(wqe_ebde_cnt, &wqe->fcp_tsend.wqe_com, 0);
- bf_set(wqe_xc, &wqe->fcp_tsend.wqe_com, xc);
- bf_set(wqe_nvme, &wqe->fcp_tsend.wqe_com, 1);
- if (phba->cfg_nvme_oas)
- bf_set(wqe_oas, &wqe->fcp_tsend.wqe_com, 1);
+ /* Word 10 - set wqes later, in template xc=1 */
+ if (!xc)
+ bf_set(wqe_xc, &wqe->fcp_tsend.wqe_com, 0);
- /* Word 11 */
- bf_set(wqe_cqid, &wqe->fcp_tsend.wqe_com,
- LPFC_WQE_CQ_ID_DEFAULT);
- bf_set(wqe_cmd_type, &wqe->fcp_tsend.wqe_com,
- FCP_COMMAND_TSEND);
+ /* Word 11 - set sup, irsp, irsplen later */
+ do_pbde = 0;
/* Word 12 */
wqe->fcp_tsend.fcp_data_len = rsp->transfer_length;
@@ -2162,15 +2422,14 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
sgl++;
if (rsp->op == NVMET_FCOP_READDATA_RSP) {
atomic_inc(&tgtp->xmt_fcp_read_rsp);
- bf_set(wqe_ar, &wqe->fcp_tsend.wqe_com, 1);
- if ((ndlp->nlp_flag & NLP_SUPPRESS_RSP) &&
- (rsp->rsplen == 12)) {
- bf_set(wqe_sup, &wqe->fcp_tsend.wqe_com, 1);
- bf_set(wqe_wqes, &wqe->fcp_tsend.wqe_com, 0);
- bf_set(wqe_irsp, &wqe->fcp_tsend.wqe_com, 0);
- bf_set(wqe_irsplen, &wqe->fcp_tsend.wqe_com, 0);
+
+ /* In template ar=1 wqes=0 sup=0 irsp=0 irsplen=0 */
+
+ if (rsp->rsplen == LPFC_NVMET_SUCCESS_LEN) {
+ if (ndlp->nlp_flag & NLP_SUPPRESS_RSP)
+ bf_set(wqe_sup,
+ &wqe->fcp_tsend.wqe_com, 1);
} else {
- bf_set(wqe_sup, &wqe->fcp_tsend.wqe_com, 0);
bf_set(wqe_wqes, &wqe->fcp_tsend.wqe_com, 1);
bf_set(wqe_irsp, &wqe->fcp_tsend.wqe_com, 1);
bf_set(wqe_irsplen, &wqe->fcp_tsend.wqe_com,
@@ -2181,15 +2440,17 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
} else {
atomic_inc(&tgtp->xmt_fcp_read);
- bf_set(wqe_sup, &wqe->fcp_tsend.wqe_com, 0);
- bf_set(wqe_wqes, &wqe->fcp_tsend.wqe_com, 0);
- bf_set(wqe_irsp, &wqe->fcp_tsend.wqe_com, 0);
+ /* In template ar=1 wqes=0 sup=0 irsp=0 irsplen=0 */
bf_set(wqe_ar, &wqe->fcp_tsend.wqe_com, 0);
- bf_set(wqe_irsplen, &wqe->fcp_tsend.wqe_com, 0);
}
break;
case NVMET_FCOP_WRITEDATA:
+ /* From the treceive template, initialize words 3 - 11 */
+ memcpy(&wqe->words[3],
+ &lpfc_treceive_cmd_template.words[3],
+ sizeof(uint32_t) * 9);
+
/* Words 0 - 2 : The first sg segment */
txrdy = dma_pool_alloc(phba->txrdy_payload_pool,
GFP_KERNEL, &physaddr);
@@ -2208,14 +2469,9 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
wqe->fcp_treceive.bde.addrHigh =
cpu_to_le32(putPaddrHigh(physaddr));
- /* Word 3 */
- wqe->fcp_treceive.payload_offset_len = TXRDY_PAYLOAD_LEN;
-
/* Word 4 */
wqe->fcp_treceive.relative_offset = ctxp->offset;
- /* Word 5 */
-
/* Word 6 */
bf_set(wqe_ctxt_tag, &wqe->fcp_treceive.wqe_com,
phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
@@ -2223,10 +2479,6 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
nvmewqe->sli4_xritag);
/* Word 7 */
- bf_set(wqe_pu, &wqe->fcp_treceive.wqe_com, 1);
- bf_set(wqe_ar, &wqe->fcp_treceive.wqe_com, 0);
- bf_set(wqe_cmnd, &wqe->fcp_treceive.wqe_com,
- CMD_FCP_TRECEIVE64_WQE);
/* Word 8 */
wqe->fcp_treceive.wqe_com.abort_tag = nvmewqe->iotag;
@@ -2235,26 +2487,17 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
bf_set(wqe_reqtag, &wqe->fcp_treceive.wqe_com, nvmewqe->iotag);
bf_set(wqe_rcvoxid, &wqe->fcp_treceive.wqe_com, ctxp->oxid);
- /* Word 10 */
- bf_set(wqe_nvme, &wqe->fcp_treceive.wqe_com, 1);
- bf_set(wqe_dbde, &wqe->fcp_treceive.wqe_com, 1);
- bf_set(wqe_iod, &wqe->fcp_treceive.wqe_com, LPFC_WQE_IOD_READ);
- bf_set(wqe_lenloc, &wqe->fcp_treceive.wqe_com,
- LPFC_WQE_LENLOC_WORD12);
- bf_set(wqe_xc, &wqe->fcp_treceive.wqe_com, xc);
- bf_set(wqe_wqes, &wqe->fcp_treceive.wqe_com, 0);
- bf_set(wqe_irsp, &wqe->fcp_treceive.wqe_com, 0);
- bf_set(wqe_irsplen, &wqe->fcp_treceive.wqe_com, 0);
- bf_set(wqe_nvme, &wqe->fcp_treceive.wqe_com, 1);
- if (phba->cfg_nvme_oas)
- bf_set(wqe_oas, &wqe->fcp_treceive.wqe_com, 1);
+ /* Word 10 - in template xc=1 */
+ if (!xc)
+ bf_set(wqe_xc, &wqe->fcp_treceive.wqe_com, 0);
- /* Word 11 */
- bf_set(wqe_cqid, &wqe->fcp_treceive.wqe_com,
- LPFC_WQE_CQ_ID_DEFAULT);
- bf_set(wqe_cmd_type, &wqe->fcp_treceive.wqe_com,
- FCP_COMMAND_TRECEIVE);
- bf_set(wqe_sup, &wqe->fcp_tsend.wqe_com, 0);
+ /* Word 11 - set pbde later */
+ if (phba->nvme_embed_pbde) {
+ do_pbde = 1;
+ } else {
+ bf_set(wqe_pbde, &wqe->fcp_treceive.wqe_com, 0);
+ do_pbde = 0;
+ }
/* Word 12 */
wqe->fcp_tsend.fcp_data_len = rsp->transfer_length;
@@ -2282,6 +2525,11 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
break;
case NVMET_FCOP_RSP:
+ /* From the treceive template, initialize words 4 - 11 */
+ memcpy(&wqe->words[4],
+ &lpfc_trsp_cmd_template.words[4],
+ sizeof(uint32_t) * 8);
+
/* Words 0 - 2 */
physaddr = rsp->rspdma;
wqe->fcp_trsp.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
@@ -2294,12 +2542,6 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
/* Word 3 */
wqe->fcp_trsp.response_len = rsp->rsplen;
- /* Word 4 */
- wqe->fcp_trsp.rsvd_4_5[0] = 0;
-
-
- /* Word 5 */
-
/* Word 6 */
bf_set(wqe_ctxt_tag, &wqe->fcp_trsp.wqe_com,
phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
@@ -2307,9 +2549,6 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
nvmewqe->sli4_xritag);
/* Word 7 */
- bf_set(wqe_pu, &wqe->fcp_trsp.wqe_com, 0);
- bf_set(wqe_ag, &wqe->fcp_trsp.wqe_com, 1);
- bf_set(wqe_cmnd, &wqe->fcp_trsp.wqe_com, CMD_FCP_TRSP64_WQE);
/* Word 8 */
wqe->fcp_trsp.wqe_com.abort_tag = nvmewqe->iotag;
@@ -2319,35 +2558,23 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
bf_set(wqe_rcvoxid, &wqe->fcp_trsp.wqe_com, ctxp->oxid);
/* Word 10 */
- bf_set(wqe_nvme, &wqe->fcp_trsp.wqe_com, 1);
- bf_set(wqe_dbde, &wqe->fcp_trsp.wqe_com, 0);
- bf_set(wqe_iod, &wqe->fcp_trsp.wqe_com, LPFC_WQE_IOD_WRITE);
- bf_set(wqe_lenloc, &wqe->fcp_trsp.wqe_com,
- LPFC_WQE_LENLOC_WORD3);
- bf_set(wqe_xc, &wqe->fcp_trsp.wqe_com, xc);
- bf_set(wqe_nvme, &wqe->fcp_trsp.wqe_com, 1);
- if (phba->cfg_nvme_oas)
- bf_set(wqe_oas, &wqe->fcp_trsp.wqe_com, 1);
+ if (xc)
+ bf_set(wqe_xc, &wqe->fcp_trsp.wqe_com, 1);
/* Word 11 */
- bf_set(wqe_cqid, &wqe->fcp_trsp.wqe_com,
- LPFC_WQE_CQ_ID_DEFAULT);
- bf_set(wqe_cmd_type, &wqe->fcp_trsp.wqe_com,
- FCP_COMMAND_TRSP);
- bf_set(wqe_sup, &wqe->fcp_tsend.wqe_com, 0);
-
- if (rsp->rsplen == LPFC_NVMET_SUCCESS_LEN) {
- /* Good response - all zero's on wire */
- bf_set(wqe_wqes, &wqe->fcp_trsp.wqe_com, 0);
- bf_set(wqe_irsp, &wqe->fcp_trsp.wqe_com, 0);
- bf_set(wqe_irsplen, &wqe->fcp_trsp.wqe_com, 0);
- } else {
+ /* In template wqes=0 irsp=0 irsplen=0 - good response */
+ if (rsp->rsplen != LPFC_NVMET_SUCCESS_LEN) {
+ /* Bad response - embed it */
bf_set(wqe_wqes, &wqe->fcp_trsp.wqe_com, 1);
bf_set(wqe_irsp, &wqe->fcp_trsp.wqe_com, 1);
bf_set(wqe_irsplen, &wqe->fcp_trsp.wqe_com,
((rsp->rsplen >> 2) - 1));
memcpy(&wqe->words[16], rsp->rspaddr, rsp->rsplen);
}
+ do_pbde = 0;
+
+ /* Word 12 */
+ wqe->fcp_trsp.rsvd_12_15[0] = 0;
/* Use rspbuf, NOT sg list */
rsp->sg_cnt = 0;
@@ -2380,6 +2607,17 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
bf_set(lpfc_sli4_sge_last, sgl, 1);
sgl->word2 = cpu_to_le32(sgl->word2);
sgl->sge_len = cpu_to_le32(cnt);
+ if (do_pbde && i == 0) {
+ bde = (struct ulp_bde64 *)&wqe->words[13];
+ memset(bde, 0, sizeof(struct ulp_bde64));
+ /* Words 13-15 (PBDE)*/
+ bde->addrLow = sgl->addr_lo;
+ bde->addrHigh = sgl->addr_hi;
+ bde->tus.f.bdeSize =
+ le32_to_cpu(sgl->sge_len);
+ bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bde->tus.w = cpu_to_le32(bde->tus.w);
+ }
sgl++;
ctxp->offset += cnt;
}
@@ -2597,7 +2835,7 @@ lpfc_nvmet_unsol_issue_abort(struct lpfc_hba *phba,
{
struct lpfc_nvmet_tgtport *tgtp;
struct lpfc_iocbq *abts_wqeq;
- union lpfc_wqe *wqe_abts;
+ union lpfc_wqe128 *wqe_abts;
struct lpfc_nodelist *ndlp;
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
@@ -2692,7 +2930,7 @@ lpfc_nvmet_sol_fcp_issue_abort(struct lpfc_hba *phba,
{
struct lpfc_nvmet_tgtport *tgtp;
struct lpfc_iocbq *abts_wqeq;
- union lpfc_wqe *abts_wqe;
+ union lpfc_wqe128 *abts_wqe;
struct lpfc_nodelist *ndlp;
unsigned long flags;
int rc;
@@ -2882,7 +3120,7 @@ lpfc_nvmet_unsol_ls_issue_abort(struct lpfc_hba *phba,
{
struct lpfc_nvmet_tgtport *tgtp;
struct lpfc_iocbq *abts_wqeq;
- union lpfc_wqe *wqe_abts;
+ union lpfc_wqe128 *wqe_abts;
unsigned long flags;
int rc;
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.h b/drivers/scsi/lpfc/lpfc_nvmet.h
index 5b32c9e4d4ef..c1bcef3f103c 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.h
+++ b/drivers/scsi/lpfc/lpfc_nvmet.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -72,7 +72,6 @@ struct lpfc_nvmet_tgtport {
atomic_t xmt_fcp_rsp_aborted;
atomic_t xmt_fcp_rsp_drop;
-
/* Stats counters - lpfc_nvmet_xmt_fcp_abort */
atomic_t xmt_fcp_xri_abort_cqe;
atomic_t xmt_fcp_abort;
@@ -81,6 +80,11 @@ struct lpfc_nvmet_tgtport {
atomic_t xmt_abort_unsol;
atomic_t xmt_abort_rsp;
atomic_t xmt_abort_rsp_error;
+
+ /* Stats counters - defer IO */
+ atomic_t defer_ctx;
+ atomic_t defer_fod;
+ atomic_t defer_wqfull;
};
struct lpfc_nvmet_ctx_info {
@@ -131,7 +135,7 @@ struct lpfc_nvmet_rcv_ctx {
#define LPFC_NVMET_XBUSY 0x4 /* XB bit set on IO cmpl */
#define LPFC_NVMET_CTX_RLS 0x8 /* ctx free requested */
#define LPFC_NVMET_ABTS_RCV 0x10 /* ABTS received on exchange */
-#define LPFC_NVMET_DEFER_RCV_REPOST 0x20 /* repost to RQ on defer rcv */
+#define LPFC_NVMET_DEFER_WQFULL 0x40 /* Waiting on a free WQE */
struct rqb_dmabuf *rqb_buffer;
struct lpfc_nvmet_ctxbuf *ctxbuf;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index c0cdaef4db24..050f04418f5f 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -837,8 +837,13 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc)
* 4K Page alignment is CRITICAL to BlockGuard, double check
* to be sure.
*/
- if (phba->cfg_enable_bg && (((unsigned long)(psb->data) &
+ if ((phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
+ (((unsigned long)(psb->data) &
(unsigned long)(SLI4_PAGE_SIZE - 1)) != 0)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+ "3369 Memory alignment error "
+ "addr=%lx\n",
+ (unsigned long)psb->data);
dma_pool_free(phba->lpfc_sg_dma_buf_pool,
psb->data, psb->dma_handle);
kfree(psb);
@@ -3304,8 +3309,12 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
dma_offset += dma_len;
sgl++;
}
- /* setup the performance hint (first data BDE) if enabled */
- if (phba->sli3_options & LPFC_SLI4_PERFH_ENABLED) {
+ /*
+ * Setup the first Payload BDE. For FCoE we just key off
+ * Performance Hints, for FC we utilize fcp_embed_pbde.
+ */
+ if ((phba->sli3_options & LPFC_SLI4_PERFH_ENABLED) ||
+ phba->fcp_embed_pbde) {
bde = (struct ulp_bde64 *)
&(iocb_cmd->unsli3.sli3Words[5]);
bde->addrLow = first_data_sgl->addr_lo;
@@ -3772,20 +3781,18 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId));
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP_UNDER,
- "9025 FCP Read Underrun, expected %d, "
+ "9025 FCP Underrun, expected %d, "
"residual %d Data: x%x x%x x%x\n",
fcpDl,
scsi_get_resid(cmnd), fcpi_parm, cmnd->cmnd[0],
cmnd->underflow);
/*
- * If there is an under run check if under run reported by
+ * If there is an under run, check if under run reported by
* storage array is same as the under run reported by HBA.
* If this is not same, there is a dropped frame.
*/
- if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
- fcpi_parm &&
- (scsi_get_resid(cmnd) != fcpi_parm)) {
+ if (fcpi_parm && (scsi_get_resid(cmnd) != fcpi_parm)) {
lpfc_printf_vlog(vport, KERN_WARNING,
LOG_FCP | LOG_FCP_ERROR,
"9026 FCP Read Check Error "
@@ -3926,7 +3933,6 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
struct lpfc_nodelist *pnode = rdata->pnode;
struct scsi_cmnd *cmd;
- int depth;
unsigned long flags;
struct lpfc_fast_path_event *fast_path_evt;
struct Scsi_Host *shost;
@@ -4132,16 +4138,11 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
}
spin_unlock_irqrestore(shost->host_lock, flags);
} else if (pnode && NLP_CHK_NODE_ACT(pnode)) {
- if ((pnode->cmd_qdepth < vport->cfg_tgt_queue_depth) &&
- time_after(jiffies, pnode->last_change_time +
+ if ((pnode->cmd_qdepth != vport->cfg_tgt_queue_depth) &&
+ time_after(jiffies, pnode->last_change_time +
msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) {
spin_lock_irqsave(shost->host_lock, flags);
- depth = pnode->cmd_qdepth * LPFC_TGTQ_RAMPUP_PCENT
- / 100;
- depth = depth ? depth : 1;
- pnode->cmd_qdepth += depth;
- if (pnode->cmd_qdepth > vport->cfg_tgt_queue_depth)
- pnode->cmd_qdepth = vport->cfg_tgt_queue_depth;
+ pnode->cmd_qdepth = vport->cfg_tgt_queue_depth;
pnode->last_change_time = jiffies;
spin_unlock_irqrestore(shost->host_lock, flags);
}
@@ -4564,9 +4565,32 @@ lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
*/
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
goto out_tgt_busy;
- if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth)
+ if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth) {
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP_ERROR,
+ "3377 Target Queue Full, scsi Id:%d Qdepth:%d"
+ " Pending command:%d"
+ " WWNN:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x, "
+ " WWPN:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
+ ndlp->nlp_sid, ndlp->cmd_qdepth,
+ atomic_read(&ndlp->cmd_pending),
+ ndlp->nlp_nodename.u.wwn[0],
+ ndlp->nlp_nodename.u.wwn[1],
+ ndlp->nlp_nodename.u.wwn[2],
+ ndlp->nlp_nodename.u.wwn[3],
+ ndlp->nlp_nodename.u.wwn[4],
+ ndlp->nlp_nodename.u.wwn[5],
+ ndlp->nlp_nodename.u.wwn[6],
+ ndlp->nlp_nodename.u.wwn[7],
+ ndlp->nlp_portname.u.wwn[0],
+ ndlp->nlp_portname.u.wwn[1],
+ ndlp->nlp_portname.u.wwn[2],
+ ndlp->nlp_portname.u.wwn[3],
+ ndlp->nlp_portname.u.wwn[4],
+ ndlp->nlp_portname.u.wwn[5],
+ ndlp->nlp_portname.u.wwn[6],
+ ndlp->nlp_portname.u.wwn[7]);
goto out_tgt_busy;
-
+ }
lpfc_cmd = lpfc_get_scsi_buf(phba, ndlp);
if (lpfc_cmd == NULL) {
lpfc_rampdown_queue_depth(phba);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index 5da7e15400cb..8e38e0204c47 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 5f5528a12308..cb17e2b2be81 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,8 +1,7 @@
-
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -36,6 +35,9 @@
#include <scsi/scsi_transport_fc.h>
#include <scsi/fc/fc_fs.h>
#include <linux/aer.h>
+#ifdef CONFIG_X86
+#include <asm/set_memory.h>
+#endif
#include <linux/nvme-fc-driver.h>
@@ -107,12 +109,14 @@ lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq)
* The caller is expected to hold the hbalock when calling this routine.
**/
static int
-lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
+lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe128 *wqe)
{
union lpfc_wqe *temp_wqe;
struct lpfc_register doorbell;
uint32_t host_index;
uint32_t idx;
+ uint32_t i = 0;
+ uint8_t *tmp;
/* sanity check on queue memory */
if (unlikely(!q))
@@ -129,10 +133,25 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
/* set consumption flag every once in a while */
if (!((q->host_index + 1) % q->entry_repost))
bf_set(wqe_wqec, &wqe->generic.wqe_com, 1);
+ else
+ bf_set(wqe_wqec, &wqe->generic.wqe_com, 0);
if (q->phba->sli3_options & LPFC_SLI4_PHWQ_ENABLED)
bf_set(wqe_wqid, &wqe->generic.wqe_com, q->queue_id);
lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);
- /* ensure WQE bcopy flushed before doorbell write */
+ if (q->dpp_enable && q->phba->cfg_enable_dpp) {
+ /* write to DPP aperture taking advatage of Combined Writes */
+ tmp = (uint8_t *)temp_wqe;
+#ifdef __raw_writeq
+ for (i = 0; i < q->entry_size; i += sizeof(uint64_t))
+ __raw_writeq(*((uint64_t *)(tmp + i)),
+ q->dpp_regaddr + i);
+#else
+ for (i = 0; i < q->entry_size; i += sizeof(uint32_t))
+ __raw_writel(*((uint32_t *)(tmp + i)),
+ q->dpp_regaddr + i);
+#endif
+ }
+ /* ensure WQE bcopy and DPP flushed before doorbell write */
wmb();
/* Update the host index before invoking device */
@@ -143,9 +162,18 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
/* Ring Doorbell */
doorbell.word0 = 0;
if (q->db_format == LPFC_DB_LIST_FORMAT) {
- bf_set(lpfc_wq_db_list_fm_num_posted, &doorbell, 1);
- bf_set(lpfc_wq_db_list_fm_index, &doorbell, host_index);
- bf_set(lpfc_wq_db_list_fm_id, &doorbell, q->queue_id);
+ if (q->dpp_enable && q->phba->cfg_enable_dpp) {
+ bf_set(lpfc_if6_wq_db_list_fm_num_posted, &doorbell, 1);
+ bf_set(lpfc_if6_wq_db_list_fm_dpp, &doorbell, 1);
+ bf_set(lpfc_if6_wq_db_list_fm_dpp_id, &doorbell,
+ q->dpp_id);
+ bf_set(lpfc_if6_wq_db_list_fm_id, &doorbell,
+ q->queue_id);
+ } else {
+ bf_set(lpfc_wq_db_list_fm_num_posted, &doorbell, 1);
+ bf_set(lpfc_wq_db_list_fm_index, &doorbell, host_index);
+ bf_set(lpfc_wq_db_list_fm_id, &doorbell, q->queue_id);
+ }
} else if (q->db_format == LPFC_DB_RING_FORMAT) {
bf_set(lpfc_wq_db_ring_fm_num_posted, &doorbell, 1);
bf_set(lpfc_wq_db_ring_fm_id, &doorbell, q->queue_id);
@@ -262,16 +290,18 @@ lpfc_sli4_mq_release(struct lpfc_queue *q)
static struct lpfc_eqe *
lpfc_sli4_eq_get(struct lpfc_queue *q)
{
+ struct lpfc_hba *phba;
struct lpfc_eqe *eqe;
uint32_t idx;
/* sanity check on queue memory */
if (unlikely(!q))
return NULL;
+ phba = q->phba;
eqe = q->qe[q->hba_index].eqe;
/* If the next EQE is not valid then we are done */
- if (!bf_get_le32(lpfc_eqe_valid, eqe))
+ if (bf_get_le32(lpfc_eqe_valid, eqe) != q->qe_valid)
return NULL;
/* If the host has not yet processed the next entry then we are done */
idx = ((q->hba_index + 1) % q->entry_count);
@@ -279,6 +309,10 @@ lpfc_sli4_eq_get(struct lpfc_queue *q)
return NULL;
q->hba_index = idx;
+ /* if the index wrapped around, toggle the valid bit */
+ if (phba->sli4_hba.pc_sli4_params.eqav && !q->hba_index)
+ q->qe_valid = (q->qe_valid) ? 0 : 1;
+
/*
* insert barrier for instruction interlock : data from the hardware
@@ -298,7 +332,7 @@ lpfc_sli4_eq_get(struct lpfc_queue *q)
* @q: The Event Queue to disable interrupts
*
**/
-static inline void
+inline void
lpfc_sli4_eq_clr_intr(struct lpfc_queue *q)
{
struct lpfc_register doorbell;
@@ -309,7 +343,26 @@ lpfc_sli4_eq_clr_intr(struct lpfc_queue *q)
bf_set(lpfc_eqcq_doorbell_eqid_hi, &doorbell,
(q->queue_id >> LPFC_EQID_HI_FIELD_SHIFT));
bf_set(lpfc_eqcq_doorbell_eqid_lo, &doorbell, q->queue_id);
- writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+ writel(doorbell.word0, q->phba->sli4_hba.EQDBregaddr);
+}
+
+/**
+ * lpfc_sli4_if6_eq_clr_intr - Turn off interrupts from this EQ
+ * @q: The Event Queue to disable interrupts
+ *
+ **/
+inline void
+lpfc_sli4_if6_eq_clr_intr(struct lpfc_queue *q)
+{
+ struct lpfc_register doorbell;
+
+ doorbell.word0 = 0;
+ bf_set(lpfc_eqcq_doorbell_eqci, &doorbell, 1);
+ bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
+ bf_set(lpfc_eqcq_doorbell_eqid_hi, &doorbell,
+ (q->queue_id >> LPFC_EQID_HI_FIELD_SHIFT));
+ bf_set(lpfc_eqcq_doorbell_eqid_lo, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.EQDBregaddr);
}
/**
@@ -331,17 +384,21 @@ uint32_t
lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
{
uint32_t released = 0;
+ struct lpfc_hba *phba;
struct lpfc_eqe *temp_eqe;
struct lpfc_register doorbell;
/* sanity check on queue memory */
if (unlikely(!q))
return 0;
+ phba = q->phba;
/* while there are valid entries */
while (q->hba_index != q->host_index) {
- temp_eqe = q->qe[q->host_index].eqe;
- bf_set_le32(lpfc_eqe_valid, temp_eqe, 0);
+ if (!phba->sli4_hba.pc_sli4_params.eqav) {
+ temp_eqe = q->qe[q->host_index].eqe;
+ bf_set_le32(lpfc_eqe_valid, temp_eqe, 0);
+ }
released++;
q->host_index = ((q->host_index + 1) % q->entry_count);
}
@@ -359,10 +416,63 @@ lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
bf_set(lpfc_eqcq_doorbell_eqid_hi, &doorbell,
(q->queue_id >> LPFC_EQID_HI_FIELD_SHIFT));
bf_set(lpfc_eqcq_doorbell_eqid_lo, &doorbell, q->queue_id);
- writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+ writel(doorbell.word0, q->phba->sli4_hba.EQDBregaddr);
/* PCI read to flush PCI pipeline on re-arming for INTx mode */
if ((q->phba->intr_type == INTx) && (arm == LPFC_QUEUE_REARM))
- readl(q->phba->sli4_hba.EQCQDBregaddr);
+ readl(q->phba->sli4_hba.EQDBregaddr);
+ return released;
+}
+
+/**
+ * lpfc_sli4_if6_eq_release - Indicates the host has finished processing an EQ
+ * @q: The Event Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Event Queue Entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the EQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of EQEs that were popped.
+ **/
+uint32_t
+lpfc_sli4_if6_eq_release(struct lpfc_queue *q, bool arm)
+{
+ uint32_t released = 0;
+ struct lpfc_hba *phba;
+ struct lpfc_eqe *temp_eqe;
+ struct lpfc_register doorbell;
+
+ /* sanity check on queue memory */
+ if (unlikely(!q))
+ return 0;
+ phba = q->phba;
+
+ /* while there are valid entries */
+ while (q->hba_index != q->host_index) {
+ if (!phba->sli4_hba.pc_sli4_params.eqav) {
+ temp_eqe = q->qe[q->host_index].eqe;
+ bf_set_le32(lpfc_eqe_valid, temp_eqe, 0);
+ }
+ released++;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+ }
+ if (unlikely(released == 0 && !arm))
+ return 0;
+
+ /* ring doorbell for number popped */
+ doorbell.word0 = 0;
+ if (arm)
+ bf_set(lpfc_if6_eq_doorbell_arm, &doorbell, 1);
+ bf_set(lpfc_if6_eq_doorbell_num_released, &doorbell, released);
+ bf_set(lpfc_if6_eq_doorbell_eqid, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.EQDBregaddr);
+ /* PCI read to flush PCI pipeline on re-arming for INTx mode */
+ if ((q->phba->intr_type == INTx) && (arm == LPFC_QUEUE_REARM))
+ readl(q->phba->sli4_hba.EQDBregaddr);
return released;
}
@@ -378,23 +488,28 @@ lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
static struct lpfc_cqe *
lpfc_sli4_cq_get(struct lpfc_queue *q)
{
+ struct lpfc_hba *phba;
struct lpfc_cqe *cqe;
uint32_t idx;
/* sanity check on queue memory */
if (unlikely(!q))
return NULL;
+ phba = q->phba;
+ cqe = q->qe[q->hba_index].cqe;
/* If the next CQE is not valid then we are done */
- if (!bf_get_le32(lpfc_cqe_valid, q->qe[q->hba_index].cqe))
+ if (bf_get_le32(lpfc_cqe_valid, cqe) != q->qe_valid)
return NULL;
/* If the host has not yet processed the next entry then we are done */
idx = ((q->hba_index + 1) % q->entry_count);
if (idx == q->host_index)
return NULL;
- cqe = q->qe[q->hba_index].cqe;
q->hba_index = idx;
+ /* if the index wrapped around, toggle the valid bit */
+ if (phba->sli4_hba.pc_sli4_params.cqav && !q->hba_index)
+ q->qe_valid = (q->qe_valid) ? 0 : 1;
/*
* insert barrier for instruction interlock : data from the hardware
@@ -427,16 +542,21 @@ uint32_t
lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm)
{
uint32_t released = 0;
+ struct lpfc_hba *phba;
struct lpfc_cqe *temp_qe;
struct lpfc_register doorbell;
/* sanity check on queue memory */
if (unlikely(!q))
return 0;
+ phba = q->phba;
+
/* while there are valid entries */
while (q->hba_index != q->host_index) {
- temp_qe = q->qe[q->host_index].cqe;
- bf_set_le32(lpfc_cqe_valid, temp_qe, 0);
+ if (!phba->sli4_hba.pc_sli4_params.cqav) {
+ temp_qe = q->qe[q->host_index].cqe;
+ bf_set_le32(lpfc_cqe_valid, temp_qe, 0);
+ }
released++;
q->host_index = ((q->host_index + 1) % q->entry_count);
}
@@ -452,7 +572,57 @@ lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm)
bf_set(lpfc_eqcq_doorbell_cqid_hi, &doorbell,
(q->queue_id >> LPFC_CQID_HI_FIELD_SHIFT));
bf_set(lpfc_eqcq_doorbell_cqid_lo, &doorbell, q->queue_id);
- writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+ writel(doorbell.word0, q->phba->sli4_hba.CQDBregaddr);
+ return released;
+}
+
+/**
+ * lpfc_sli4_if6_cq_release - Indicates the host has finished processing a CQ
+ * @q: The Completion Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Completion queue entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the CQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of CQEs that were released.
+ **/
+uint32_t
+lpfc_sli4_if6_cq_release(struct lpfc_queue *q, bool arm)
+{
+ uint32_t released = 0;
+ struct lpfc_hba *phba;
+ struct lpfc_cqe *temp_qe;
+ struct lpfc_register doorbell;
+
+ /* sanity check on queue memory */
+ if (unlikely(!q))
+ return 0;
+ phba = q->phba;
+
+ /* while there are valid entries */
+ while (q->hba_index != q->host_index) {
+ if (!phba->sli4_hba.pc_sli4_params.cqav) {
+ temp_qe = q->qe[q->host_index].cqe;
+ bf_set_le32(lpfc_cqe_valid, temp_qe, 0);
+ }
+ released++;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+ }
+ if (unlikely(released == 0 && !arm))
+ return 0;
+
+ /* ring doorbell for number popped */
+ doorbell.word0 = 0;
+ if (arm)
+ bf_set(lpfc_if6_cq_doorbell_arm, &doorbell, 1);
+ bf_set(lpfc_if6_cq_doorbell_num_released, &doorbell, released);
+ bf_set(lpfc_if6_cq_doorbell_cqid, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.CQDBregaddr);
return released;
}
@@ -2218,18 +2388,18 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
void
lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
{
- wait_queue_head_t *pdone_q;
unsigned long drvr_flag;
+ struct completion *pmbox_done;
/*
- * If pdone_q is empty, the driver thread gave up waiting and
+ * If pmbox_done is empty, the driver thread gave up waiting and
* continued running.
*/
pmboxq->mbox_flag |= LPFC_MBX_WAKE;
spin_lock_irqsave(&phba->hbalock, drvr_flag);
- pdone_q = (wait_queue_head_t *) pmboxq->context1;
- if (pdone_q)
- wake_up_interruptible(pdone_q);
+ pmbox_done = (struct completion *)pmboxq->context3;
+ if (pmbox_done)
+ complete(pmbox_done);
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
return;
}
@@ -2330,7 +2500,7 @@ lpfc_sli4_unreg_rpi_cmpl_clr(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
if (pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) {
if (phba->sli_rev == LPFC_SLI_REV4 &&
(bf_get(lpfc_sli_intf_if_type,
- &phba->sli4_hba.sli_intf) ==
+ &phba->sli4_hba.sli_intf) >=
LPFC_SLI_INTF_IF_TYPE_2)) {
if (ndlp) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI,
@@ -3776,6 +3946,7 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
uint32_t i;
+ struct lpfc_iocbq *piocb, *next_iocb;
spin_lock_irq(&phba->hbalock);
/* Indicate the I/O queues are flushed */
@@ -3790,6 +3961,9 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
spin_lock_irq(&pring->ring_lock);
/* Retrieve everything on txq */
list_splice_init(&pring->txq, &txq);
+ list_for_each_entry_safe(piocb, next_iocb,
+ &pring->txcmplq, list)
+ piocb->iocb_flag &= ~LPFC_IO_ON_TXCMPLQ;
/* Retrieve everything on the txcmplq */
list_splice_init(&pring->txcmplq, &txcmplq);
pring->txq_cnt = 0;
@@ -3811,6 +3985,9 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
spin_lock_irq(&phba->hbalock);
/* Retrieve everything on txq */
list_splice_init(&pring->txq, &txq);
+ list_for_each_entry_safe(piocb, next_iocb,
+ &pring->txcmplq, list)
+ piocb->iocb_flag &= ~LPFC_IO_ON_TXCMPLQ;
/* Retrieve everything on the txcmplq */
list_splice_init(&pring->txcmplq, &txcmplq);
pring->txq_cnt = 0;
@@ -3842,6 +4019,7 @@ lpfc_sli_flush_nvme_rings(struct lpfc_hba *phba)
LIST_HEAD(txcmplq);
struct lpfc_sli_ring *pring;
uint32_t i;
+ struct lpfc_iocbq *piocb, *next_iocb;
if (phba->sli_rev < LPFC_SLI_REV4)
return;
@@ -3858,8 +4036,11 @@ lpfc_sli_flush_nvme_rings(struct lpfc_hba *phba)
for (i = 0; i < phba->cfg_nvme_io_channel; i++) {
pring = phba->sli4_hba.nvme_wq[i]->pring;
- /* Retrieve everything on the txcmplq */
spin_lock_irq(&pring->ring_lock);
+ list_for_each_entry_safe(piocb, next_iocb,
+ &pring->txcmplq, list)
+ piocb->iocb_flag &= ~LPFC_IO_ON_TXCMPLQ;
+ /* Retrieve everything on the txcmplq */
list_splice_init(&pring->txcmplq, &txcmplq);
pring->txcmplq_cnt = 0;
spin_unlock_irq(&pring->ring_lock);
@@ -4812,13 +4993,14 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
phba->hbq_get = phba->mbox->us.s3_pgp.hbq_get;
phba->port_gp = phba->mbox->us.s3_pgp.port;
- if (phba->cfg_enable_bg) {
- if (pmb->u.mb.un.varCfgPort.gbg)
- phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
- else
+ if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) {
+ if (pmb->u.mb.un.varCfgPort.gbg == 0) {
+ phba->cfg_enable_bg = 0;
+ phba->sli3_options &= ~LPFC_SLI3_BG_ENABLED;
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0443 Adapter did not grant "
"BlockGuard\n");
+ }
}
} else {
phba->hbq_get = NULL;
@@ -5290,41 +5472,42 @@ static void
lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
{
int qidx;
+ struct lpfc_sli4_hba *sli4_hba = &phba->sli4_hba;
- lpfc_sli4_cq_release(phba->sli4_hba.mbx_cq, LPFC_QUEUE_REARM);
- lpfc_sli4_cq_release(phba->sli4_hba.els_cq, LPFC_QUEUE_REARM);
- if (phba->sli4_hba.nvmels_cq)
- lpfc_sli4_cq_release(phba->sli4_hba.nvmels_cq,
+ sli4_hba->sli4_cq_release(sli4_hba->mbx_cq, LPFC_QUEUE_REARM);
+ sli4_hba->sli4_cq_release(sli4_hba->els_cq, LPFC_QUEUE_REARM);
+ if (sli4_hba->nvmels_cq)
+ sli4_hba->sli4_cq_release(sli4_hba->nvmels_cq,
LPFC_QUEUE_REARM);
- if (phba->sli4_hba.fcp_cq)
+ if (sli4_hba->fcp_cq)
for (qidx = 0; qidx < phba->cfg_fcp_io_channel; qidx++)
- lpfc_sli4_cq_release(phba->sli4_hba.fcp_cq[qidx],
+ sli4_hba->sli4_cq_release(sli4_hba->fcp_cq[qidx],
LPFC_QUEUE_REARM);
- if (phba->sli4_hba.nvme_cq)
+ if (sli4_hba->nvme_cq)
for (qidx = 0; qidx < phba->cfg_nvme_io_channel; qidx++)
- lpfc_sli4_cq_release(phba->sli4_hba.nvme_cq[qidx],
+ sli4_hba->sli4_cq_release(sli4_hba->nvme_cq[qidx],
LPFC_QUEUE_REARM);
if (phba->cfg_fof)
- lpfc_sli4_cq_release(phba->sli4_hba.oas_cq, LPFC_QUEUE_REARM);
+ sli4_hba->sli4_cq_release(sli4_hba->oas_cq, LPFC_QUEUE_REARM);
- if (phba->sli4_hba.hba_eq)
+ if (sli4_hba->hba_eq)
for (qidx = 0; qidx < phba->io_channel_irqs; qidx++)
- lpfc_sli4_eq_release(phba->sli4_hba.hba_eq[qidx],
- LPFC_QUEUE_REARM);
+ sli4_hba->sli4_eq_release(sli4_hba->hba_eq[qidx],
+ LPFC_QUEUE_REARM);
if (phba->nvmet_support) {
for (qidx = 0; qidx < phba->cfg_nvmet_mrq; qidx++) {
- lpfc_sli4_cq_release(
- phba->sli4_hba.nvmet_cqset[qidx],
+ sli4_hba->sli4_cq_release(
+ sli4_hba->nvmet_cqset[qidx],
LPFC_QUEUE_REARM);
}
}
if (phba->cfg_fof)
- lpfc_sli4_eq_release(phba->sli4_hba.fof_eq, LPFC_QUEUE_REARM);
+ sli4_hba->sli4_eq_release(sli4_hba->fof_eq, LPFC_QUEUE_REARM);
}
/**
@@ -6533,9 +6716,11 @@ lpfc_post_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *hrq,
struct lpfc_rqe hrqe;
struct lpfc_rqe drqe;
struct lpfc_rqb *rqbp;
+ unsigned long flags;
struct rqb_dmabuf *rqb_buffer;
LIST_HEAD(rqb_buf_list);
+ spin_lock_irqsave(&phba->hbalock, flags);
rqbp = hrq->rqbp;
for (i = 0; i < count; i++) {
/* IF RQ is already full, don't bother */
@@ -6559,6 +6744,15 @@ lpfc_post_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *hrq,
drqe.address_hi = putPaddrHigh(rqb_buffer->dbuf.phys);
rc = lpfc_sli4_rq_put(hrq, drq, &hrqe, &drqe);
if (rc < 0) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "6421 Cannot post to HRQ %d: %x %x %x "
+ "DRQ %x %x\n",
+ hrq->queue_id,
+ hrq->host_index,
+ hrq->hba_index,
+ hrq->entry_count,
+ drq->host_index,
+ drq->hba_index);
rqbp->rqb_free_buffer(phba, rqb_buffer);
} else {
list_add_tail(&rqb_buffer->hbuf.list,
@@ -6566,6 +6760,7 @@ lpfc_post_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *hrq,
rqbp->buffer_count++;
}
}
+ spin_unlock_irqrestore(&phba->hbalock, flags);
return 1;
}
@@ -6693,6 +6888,18 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
/* Save information as VPD data */
phba->vpd.rev.biuRev = mqe->un.read_rev.first_hw_rev;
phba->vpd.rev.smRev = mqe->un.read_rev.second_hw_rev;
+
+ /*
+ * This is because first G7 ASIC doesn't support the standard
+ * 0x5a NVME cmd descriptor type/subtype
+ */
+ if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+ LPFC_SLI_INTF_IF_TYPE_6) &&
+ (phba->vpd.rev.biuRev == LPFC_G7_ASIC_1) &&
+ (phba->vpd.rev.smRev == 0) &&
+ (phba->cfg_nvme_embed_cmd == 1))
+ phba->cfg_nvme_embed_cmd = 0;
+
phba->vpd.rev.endecRev = mqe->un.read_rev.third_hw_rev;
phba->vpd.rev.fcphHigh = bf_get(lpfc_mbx_rd_rev_fcph_high,
&mqe->un.read_rev);
@@ -6771,21 +6978,26 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
"0378 No support for fcpi mode.\n");
ftr_rsp++;
}
- if (bf_get(lpfc_mbx_rq_ftr_rsp_perfh, &mqe->un.req_ftrs))
- phba->sli3_options |= LPFC_SLI4_PERFH_ENABLED;
- else
- phba->sli3_options &= ~LPFC_SLI4_PERFH_ENABLED;
+
+ /* Performance Hints are ONLY for FCoE */
+ if (phba->hba_flag & HBA_FCOE_MODE) {
+ if (bf_get(lpfc_mbx_rq_ftr_rsp_perfh, &mqe->un.req_ftrs))
+ phba->sli3_options |= LPFC_SLI4_PERFH_ENABLED;
+ else
+ phba->sli3_options &= ~LPFC_SLI4_PERFH_ENABLED;
+ }
+
/*
* If the port cannot support the host's requested features
* then turn off the global config parameters to disable the
* feature in the driver. This is not a fatal error.
*/
- phba->sli3_options &= ~LPFC_SLI3_BG_ENABLED;
- if (phba->cfg_enable_bg) {
- if (bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs))
- phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
- else
+ if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) {
+ if (!(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs))) {
+ phba->cfg_enable_bg = 0;
+ phba->sli3_options &= ~LPFC_SLI3_BG_ENABLED;
ftr_rsp++;
+ }
}
if (phba->max_vpi && phba->cfg_enable_npiv &&
@@ -7209,6 +7421,7 @@ lpfc_sli4_mbox_completions_pending(struct lpfc_hba *phba)
struct lpfc_queue *mcq;
struct lpfc_mcqe *mcqe;
bool pending_completions = false;
+ uint8_t qe_valid;
if (unlikely(!phba) || (phba->sli_rev != LPFC_SLI_REV4))
return false;
@@ -7217,7 +7430,8 @@ lpfc_sli4_mbox_completions_pending(struct lpfc_hba *phba)
mcq = phba->sli4_hba.mbx_cq;
idx = mcq->hba_index;
- while (bf_get_le32(lpfc_cqe_valid, mcq->qe[idx].cqe)) {
+ qe_valid = mcq->qe_valid;
+ while (bf_get_le32(lpfc_cqe_valid, mcq->qe[idx].cqe) == qe_valid) {
mcqe = (struct lpfc_mcqe *)mcq->qe[idx].cqe;
if (bf_get_le32(lpfc_trailer_completed, mcqe) &&
(!bf_get_le32(lpfc_trailer_async, mcqe))) {
@@ -7227,6 +7441,10 @@ lpfc_sli4_mbox_completions_pending(struct lpfc_hba *phba)
idx = (idx + 1) % mcq->entry_count;
if (mcq->hba_index == idx)
break;
+
+ /* if the index wrapped around, toggle the valid bit */
+ if (phba->sli4_hba.pc_sli4_params.cqav && !idx)
+ qe_valid = (qe_valid) ? 0 : 1;
}
return pending_completions;
@@ -7246,7 +7464,7 @@ lpfc_sli4_mbox_completions_pending(struct lpfc_hba *phba)
bool
lpfc_sli4_process_missed_mbox_completions(struct lpfc_hba *phba)
{
-
+ struct lpfc_sli4_hba *sli4_hba = &phba->sli4_hba;
uint32_t eqidx;
struct lpfc_queue *fpeq = NULL;
struct lpfc_eqe *eqe;
@@ -7257,11 +7475,11 @@ lpfc_sli4_process_missed_mbox_completions(struct lpfc_hba *phba)
/* Find the eq associated with the mcq */
- if (phba->sli4_hba.hba_eq)
+ if (sli4_hba->hba_eq)
for (eqidx = 0; eqidx < phba->io_channel_irqs; eqidx++)
- if (phba->sli4_hba.hba_eq[eqidx]->queue_id ==
- phba->sli4_hba.mbx_cq->assoc_qid) {
- fpeq = phba->sli4_hba.hba_eq[eqidx];
+ if (sli4_hba->hba_eq[eqidx]->queue_id ==
+ sli4_hba->mbx_cq->assoc_qid) {
+ fpeq = sli4_hba->hba_eq[eqidx];
break;
}
if (!fpeq)
@@ -7269,7 +7487,7 @@ lpfc_sli4_process_missed_mbox_completions(struct lpfc_hba *phba)
/* Turn off interrupts from this EQ */
- lpfc_sli4_eq_clr_intr(fpeq);
+ sli4_hba->sli4_eq_clr_intr(fpeq);
/* Check to see if a mbox completion is pending */
@@ -7290,7 +7508,7 @@ lpfc_sli4_process_missed_mbox_completions(struct lpfc_hba *phba)
/* Always clear and re-arm the EQ */
- lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_REARM);
+ sli4_hba->sli4_eq_release(fpeq, LPFC_QUEUE_REARM);
return mbox_pending;
@@ -8100,7 +8318,7 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
} else if (flag == MBX_POLL) {
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
"(%d):2542 Try to issue mailbox command "
- "x%x (x%x/x%x) synchronously ahead of async"
+ "x%x (x%x/x%x) synchronously ahead of async "
"mailbox command queue: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
@@ -8664,7 +8882,7 @@ lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
**/
static int
lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
- union lpfc_wqe *wqe)
+ union lpfc_wqe128 *wqe)
{
uint32_t xmit_len = 0, total_len = 0;
uint8_t ct = 0;
@@ -8767,7 +8985,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
iocbq->context2)->virt);
if_type = bf_get(lpfc_sli_intf_if_type,
&phba->sli4_hba.sli_intf);
- if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
+ if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
if (pcmd && (*pcmd == ELS_CMD_FLOGI ||
*pcmd == ELS_CMD_SCR ||
*pcmd == ELS_CMD_FDISC ||
@@ -8870,31 +9088,36 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
}
/* Note, word 10 is already initialized to 0 */
+ /* Don't set PBDE for Perf hints, just fcp_embed_pbde */
+ if (phba->fcp_embed_pbde)
+ bf_set(wqe_pbde, &wqe->fcp_iwrite.wqe_com, 1);
+ else
+ bf_set(wqe_pbde, &wqe->fcp_iwrite.wqe_com, 0);
+
if (phba->fcp_embed_io) {
struct lpfc_scsi_buf *lpfc_cmd;
struct sli4_sge *sgl;
- union lpfc_wqe128 *wqe128;
struct fcp_cmnd *fcp_cmnd;
uint32_t *ptr;
/* 128 byte wqe support here */
- wqe128 = (union lpfc_wqe128 *)wqe;
lpfc_cmd = iocbq->context1;
sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
fcp_cmnd = lpfc_cmd->fcp_cmnd;
/* Word 0-2 - FCP_CMND */
- wqe128->generic.bde.tus.f.bdeFlags =
+ wqe->generic.bde.tus.f.bdeFlags =
BUFF_TYPE_BDE_IMMED;
- wqe128->generic.bde.tus.f.bdeSize = sgl->sge_len;
- wqe128->generic.bde.addrHigh = 0;
- wqe128->generic.bde.addrLow = 88; /* Word 22 */
+ wqe->generic.bde.tus.f.bdeSize = sgl->sge_len;
+ wqe->generic.bde.addrHigh = 0;
+ wqe->generic.bde.addrLow = 88; /* Word 22 */
- bf_set(wqe_wqes, &wqe128->fcp_iwrite.wqe_com, 1);
+ bf_set(wqe_wqes, &wqe->fcp_iwrite.wqe_com, 1);
+ bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 0);
/* Word 22-29 FCP CMND Payload */
- ptr = &wqe128->words[22];
+ ptr = &wqe->words[22];
memcpy(ptr, fcp_cmnd, sizeof(struct fcp_cmnd));
}
break;
@@ -8929,31 +9152,36 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
}
/* Note, word 10 is already initialized to 0 */
+ /* Don't set PBDE for Perf hints, just fcp_embed_pbde */
+ if (phba->fcp_embed_pbde)
+ bf_set(wqe_pbde, &wqe->fcp_iread.wqe_com, 1);
+ else
+ bf_set(wqe_pbde, &wqe->fcp_iread.wqe_com, 0);
+
if (phba->fcp_embed_io) {
struct lpfc_scsi_buf *lpfc_cmd;
struct sli4_sge *sgl;
- union lpfc_wqe128 *wqe128;
struct fcp_cmnd *fcp_cmnd;
uint32_t *ptr;
/* 128 byte wqe support here */
- wqe128 = (union lpfc_wqe128 *)wqe;
lpfc_cmd = iocbq->context1;
sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
fcp_cmnd = lpfc_cmd->fcp_cmnd;
/* Word 0-2 - FCP_CMND */
- wqe128->generic.bde.tus.f.bdeFlags =
+ wqe->generic.bde.tus.f.bdeFlags =
BUFF_TYPE_BDE_IMMED;
- wqe128->generic.bde.tus.f.bdeSize = sgl->sge_len;
- wqe128->generic.bde.addrHigh = 0;
- wqe128->generic.bde.addrLow = 88; /* Word 22 */
+ wqe->generic.bde.tus.f.bdeSize = sgl->sge_len;
+ wqe->generic.bde.addrHigh = 0;
+ wqe->generic.bde.addrLow = 88; /* Word 22 */
- bf_set(wqe_wqes, &wqe128->fcp_iread.wqe_com, 1);
+ bf_set(wqe_wqes, &wqe->fcp_iread.wqe_com, 1);
+ bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 0);
/* Word 22-29 FCP CMND Payload */
- ptr = &wqe128->words[22];
+ ptr = &wqe->words[22];
memcpy(ptr, fcp_cmnd, sizeof(struct fcp_cmnd));
}
break;
@@ -8990,28 +9218,27 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
if (phba->fcp_embed_io) {
struct lpfc_scsi_buf *lpfc_cmd;
struct sli4_sge *sgl;
- union lpfc_wqe128 *wqe128;
struct fcp_cmnd *fcp_cmnd;
uint32_t *ptr;
/* 128 byte wqe support here */
- wqe128 = (union lpfc_wqe128 *)wqe;
lpfc_cmd = iocbq->context1;
sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
fcp_cmnd = lpfc_cmd->fcp_cmnd;
/* Word 0-2 - FCP_CMND */
- wqe128->generic.bde.tus.f.bdeFlags =
+ wqe->generic.bde.tus.f.bdeFlags =
BUFF_TYPE_BDE_IMMED;
- wqe128->generic.bde.tus.f.bdeSize = sgl->sge_len;
- wqe128->generic.bde.addrHigh = 0;
- wqe128->generic.bde.addrLow = 88; /* Word 22 */
+ wqe->generic.bde.tus.f.bdeSize = sgl->sge_len;
+ wqe->generic.bde.addrHigh = 0;
+ wqe->generic.bde.addrLow = 88; /* Word 22 */
- bf_set(wqe_wqes, &wqe128->fcp_icmd.wqe_com, 1);
+ bf_set(wqe_wqes, &wqe->fcp_icmd.wqe_com, 1);
+ bf_set(wqe_dbde, &wqe->fcp_icmd.wqe_com, 0);
/* Word 22-29 FCP CMND Payload */
- ptr = &wqe128->words[22];
+ ptr = &wqe->words[22];
memcpy(ptr, fcp_cmnd, sizeof(struct fcp_cmnd));
}
break;
@@ -9064,7 +9291,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
if_type = bf_get(lpfc_sli_intf_if_type,
&phba->sli4_hba.sli_intf);
- if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
+ if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
if (iocbq->vport->fc_flag & FC_PT2PT) {
bf_set(els_rsp64_sp, &wqe->xmit_els_rsp, 1);
bf_set(els_rsp64_sid, &wqe->xmit_els_rsp,
@@ -9249,8 +9476,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
struct lpfc_iocbq *piocb, uint32_t flag)
{
struct lpfc_sglq *sglq;
- union lpfc_wqe *wqe;
- union lpfc_wqe128 wqe128;
+ union lpfc_wqe128 wqe;
struct lpfc_queue *wq;
struct lpfc_sli_ring *pring;
@@ -9270,9 +9496,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
/*
* The WQE can be either 64 or 128 bytes,
- * so allocate space on the stack assuming the largest.
*/
- wqe = (union lpfc_wqe *)&wqe128;
lockdep_assert_held(&phba->hbalock);
@@ -9322,10 +9546,10 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
return IOCB_ERROR;
}
- if (lpfc_sli4_iocb2wqe(phba, piocb, wqe))
+ if (lpfc_sli4_iocb2wqe(phba, piocb, &wqe))
return IOCB_ERROR;
- if (lpfc_sli4_wq_put(wq, wqe))
+ if (lpfc_sli4_wq_put(wq, &wqe))
return IOCB_ERROR;
lpfc_sli_ringtxcmpl_put(phba, pring, piocb);
@@ -9470,7 +9694,7 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
fpeq = phba->sli4_hba.hba_eq[idx];
/* Turn off interrupts from this EQ */
- lpfc_sli4_eq_clr_intr(fpeq);
+ phba->sli4_hba.sli4_eq_clr_intr(fpeq);
/*
* Process all the events on FCP EQ
@@ -9482,7 +9706,7 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
}
/* Always clear and re-arm the EQ */
- lpfc_sli4_eq_release(fpeq,
+ phba->sli4_hba.sli4_eq_release(fpeq,
LPFC_QUEUE_REARM);
}
atomic_inc(&hba_eq_hdl->hba_eq_in_use);
@@ -10695,7 +10919,7 @@ lpfc_sli4_abort_nvme_io(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
{
struct lpfc_vport *vport = cmdiocb->vport;
struct lpfc_iocbq *abtsiocbp;
- union lpfc_wqe *abts_wqe;
+ union lpfc_wqe128 *abts_wqe;
int retval;
/*
@@ -11442,31 +11666,25 @@ int
lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq,
uint32_t timeout)
{
- DECLARE_WAIT_QUEUE_HEAD_ONSTACK(done_q);
- MAILBOX_t *mb = NULL;
+ struct completion mbox_done;
int retval;
unsigned long flag;
- /* The caller might set context1 for extended buffer */
- if (pmboxq->context1)
- mb = (MAILBOX_t *)pmboxq->context1;
-
pmboxq->mbox_flag &= ~LPFC_MBX_WAKE;
/* setup wake call as IOCB callback */
pmboxq->mbox_cmpl = lpfc_sli_wake_mbox_wait;
- /* setup context field to pass wait_queue pointer to wake function */
- pmboxq->context1 = &done_q;
+ /* setup context3 field to pass wait_queue pointer to wake function */
+ init_completion(&mbox_done);
+ pmboxq->context3 = &mbox_done;
/* now issue the command */
retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
if (retval == MBX_BUSY || retval == MBX_SUCCESS) {
- wait_event_interruptible_timeout(done_q,
- pmboxq->mbox_flag & LPFC_MBX_WAKE,
- msecs_to_jiffies(timeout * 1000));
+ wait_for_completion_timeout(&mbox_done,
+ msecs_to_jiffies(timeout * 1000));
spin_lock_irqsave(&phba->hbalock, flag);
- /* restore the possible extended buffer for free resource */
- pmboxq->context1 = (uint8_t *)mb;
+ pmboxq->context3 = NULL;
/*
* if LPFC_MBX_WAKE flag is set the mailbox is completed
* else do not free the resources.
@@ -11478,11 +11696,7 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq,
pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
}
spin_unlock_irqrestore(&phba->hbalock, flag);
- } else {
- /* restore the possible extended buffer for free resource */
- pmboxq->context1 = (uint8_t *)mb;
}
-
return retval;
}
@@ -11648,6 +11862,7 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba)
}
break;
case LPFC_SLI_INTF_IF_TYPE_2:
+ case LPFC_SLI_INTF_IF_TYPE_6:
if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
&portstat_reg.word0) ||
lpfc_readl(phba->sli4_hba.PSMPHRregaddr,
@@ -13112,7 +13327,7 @@ lpfc_sli4_sp_process_cq(struct work_struct *work)
"(x%x), type (%d)\n", cq->queue_id, cq->type);
/* In any case, flash and re-arm the RCQ */
- lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+ phba->sli4_hba.sli4_cq_release(cq, LPFC_QUEUE_REARM);
/* wake up worker thread if there are works to be done */
if (workposted)
@@ -13230,6 +13445,8 @@ lpfc_sli4_fp_handle_rel_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
if (childwq->queue_id == hba_wqid) {
lpfc_sli4_wq_release(childwq,
bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+ if (childwq->q_flag & HBA_NVMET_WQFULL)
+ lpfc_nvmet_wqfull_process(phba, childwq);
wqid_matched = true;
break;
}
@@ -13542,7 +13759,7 @@ lpfc_sli4_hba_process_cq(struct work_struct *work)
"queue fcpcqid=%d\n", cq->queue_id);
/* In any case, flash and re-arm the CQ */
- lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+ phba->sli4_hba.sli4_cq_release(cq, LPFC_QUEUE_REARM);
/* wake up worker thread if there are works to be done */
if (workposted)
@@ -13559,7 +13776,7 @@ lpfc_sli4_eq_flush(struct lpfc_hba *phba, struct lpfc_queue *eq)
;
/* Clear and re-arm the EQ */
- lpfc_sli4_eq_release(eq, LPFC_QUEUE_REARM);
+ phba->sli4_hba.sli4_eq_release(eq, LPFC_QUEUE_REARM);
}
@@ -13707,7 +13924,7 @@ lpfc_sli4_fof_intr_handler(int irq, void *dev_id)
}
}
/* Always clear and re-arm the fast-path EQ */
- lpfc_sli4_eq_release(eq, LPFC_QUEUE_REARM);
+ phba->sli4_hba.sli4_eq_release(eq, LPFC_QUEUE_REARM);
return IRQ_HANDLED;
}
@@ -13765,7 +13982,7 @@ lpfc_sli4_hba_intr_handler(int irq, void *dev_id)
if (lpfc_fcp_look_ahead) {
if (atomic_dec_and_test(&hba_eq_hdl->hba_eq_in_use))
- lpfc_sli4_eq_clr_intr(fpeq);
+ phba->sli4_hba.sli4_eq_clr_intr(fpeq);
else {
atomic_inc(&hba_eq_hdl->hba_eq_in_use);
return IRQ_NONE;
@@ -13800,7 +14017,7 @@ lpfc_sli4_hba_intr_handler(int irq, void *dev_id)
fpeq->EQ_max_eqe = ecount;
/* Always clear and re-arm the fast-path EQ */
- lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_REARM);
+ phba->sli4_hba.sli4_eq_release(fpeq, LPFC_QUEUE_REARM);
if (unlikely(ecount == 0)) {
fpeq->EQ_no_entry++;
@@ -13948,6 +14165,7 @@ lpfc_sli4_queue_alloc(struct lpfc_hba *phba, uint32_t page_size,
INIT_LIST_HEAD(&queue->list);
INIT_LIST_HEAD(&queue->wq_list);
+ INIT_LIST_HEAD(&queue->wqfull_list);
INIT_LIST_HEAD(&queue->page_list);
INIT_LIST_HEAD(&queue->child_list);
@@ -14173,11 +14391,21 @@ lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint32_t imax)
LPFC_MBOX_OPCODE_EQ_CREATE,
length, LPFC_SLI4_MBX_EMBED);
eq_create = &mbox->u.mqe.un.eq_create;
+ shdr = (union lpfc_sli4_cfg_shdr *) &eq_create->header.cfg_shdr;
bf_set(lpfc_mbx_eq_create_num_pages, &eq_create->u.request,
eq->page_count);
bf_set(lpfc_eq_context_size, &eq_create->u.request.context,
LPFC_EQE_SIZE);
bf_set(lpfc_eq_context_valid, &eq_create->u.request.context, 1);
+
+ /* Use version 2 of CREATE_EQ if eqav is set */
+ if (phba->sli4_hba.pc_sli4_params.eqav) {
+ bf_set(lpfc_mbox_hdr_version, &shdr->request,
+ LPFC_Q_CREATE_VERSION_2);
+ bf_set(lpfc_eq_context_autovalid, &eq_create->u.request.context,
+ phba->sli4_hba.pc_sli4_params.eqav);
+ }
+
/* don't setup delay multiplier using EQ_CREATE */
dmult = 0;
bf_set(lpfc_eq_context_delay_multi, &eq_create->u.request.context,
@@ -14222,7 +14450,6 @@ lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint32_t imax)
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->context1 = NULL;
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
- shdr = (union lpfc_sli4_cfg_shdr *) &eq_create->header.cfg_shdr;
shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
if (shdr_status || shdr_add_status || rc) {
@@ -14305,6 +14532,8 @@ lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
(cq->page_size / SLI4_PAGE_SIZE));
bf_set(lpfc_cq_eq_id_2, &cq_create->u.request.context,
eq->queue_id);
+ bf_set(lpfc_cq_context_autovalid, &cq_create->u.request.context,
+ phba->sli4_hba.pc_sli4_params.cqav);
} else {
bf_set(lpfc_cq_eq_id, &cq_create->u.request.context,
eq->queue_id);
@@ -14476,6 +14705,9 @@ lpfc_cq_create_set(struct lpfc_hba *phba, struct lpfc_queue **cqp,
&cq_set->u.request, 0);
bf_set(lpfc_mbx_cq_create_set_num_cq,
&cq_set->u.request, numcq);
+ bf_set(lpfc_mbx_cq_create_set_autovalid,
+ &cq_set->u.request,
+ phba->sli4_hba.pc_sli4_params.cqav);
switch (cq->entry_count) {
case 2048:
case 4096:
@@ -14881,6 +15113,9 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
void __iomem *bar_memmap_p;
uint32_t db_offset;
uint16_t pci_barset;
+ uint8_t dpp_barset;
+ uint32_t dpp_offset;
+ unsigned long pg_addr;
uint8_t wq_create_version;
/* sanity check on queue memory */
@@ -14908,43 +15143,19 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
bf_set(lpfc_mbox_hdr_version, &shdr->request,
phba->sli4_hba.pc_sli4_params.wqv);
+ if ((phba->sli4_hba.pc_sli4_params.wqsize & LPFC_WQ_SZ128_SUPPORT) ||
+ (wq->page_size > SLI4_PAGE_SIZE))
+ wq_create_version = LPFC_Q_CREATE_VERSION_1;
+ else
+ wq_create_version = LPFC_Q_CREATE_VERSION_0;
+
+
if (phba->sli4_hba.pc_sli4_params.wqsize & LPFC_WQ_SZ128_SUPPORT)
wq_create_version = LPFC_Q_CREATE_VERSION_1;
else
wq_create_version = LPFC_Q_CREATE_VERSION_0;
switch (wq_create_version) {
- case LPFC_Q_CREATE_VERSION_0:
- switch (wq->entry_size) {
- default:
- case 64:
- /* Nothing to do, version 0 ONLY supports 64 byte */
- page = wq_create->u.request.page;
- break;
- case 128:
- if (!(phba->sli4_hba.pc_sli4_params.wqsize &
- LPFC_WQ_SZ128_SUPPORT)) {
- status = -ERANGE;
- goto out;
- }
- /* If we get here the HBA MUST also support V1 and
- * we MUST use it
- */
- bf_set(lpfc_mbox_hdr_version, &shdr->request,
- LPFC_Q_CREATE_VERSION_1);
-
- bf_set(lpfc_mbx_wq_create_wqe_count,
- &wq_create->u.request_1, wq->entry_count);
- bf_set(lpfc_mbx_wq_create_wqe_size,
- &wq_create->u.request_1,
- LPFC_WQ_WQE_SIZE_128);
- bf_set(lpfc_mbx_wq_create_page_size,
- &wq_create->u.request_1,
- LPFC_WQ_PAGE_SIZE_4096);
- page = wq_create->u.request_1.page;
- break;
- }
- break;
case LPFC_Q_CREATE_VERSION_1:
bf_set(lpfc_mbx_wq_create_wqe_count, &wq_create->u.request_1,
wq->entry_count);
@@ -14959,24 +15170,21 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
LPFC_WQ_WQE_SIZE_64);
break;
case 128:
- if (!(phba->sli4_hba.pc_sli4_params.wqsize &
- LPFC_WQ_SZ128_SUPPORT)) {
- status = -ERANGE;
- goto out;
- }
bf_set(lpfc_mbx_wq_create_wqe_size,
&wq_create->u.request_1,
LPFC_WQ_WQE_SIZE_128);
break;
}
+ /* Request DPP by default */
+ bf_set(lpfc_mbx_wq_create_dpp_req, &wq_create->u.request_1, 1);
bf_set(lpfc_mbx_wq_create_page_size,
&wq_create->u.request_1,
(wq->page_size / SLI4_PAGE_SIZE));
page = wq_create->u.request_1.page;
break;
default:
- status = -ERANGE;
- goto out;
+ page = wq_create->u.request.page;
+ break;
}
list_for_each_entry(dmabuf, &wq->page_list, list) {
@@ -15000,52 +15208,120 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
status = -ENXIO;
goto out;
}
- wq->queue_id = bf_get(lpfc_mbx_wq_create_q_id, &wq_create->u.response);
+
+ if (wq_create_version == LPFC_Q_CREATE_VERSION_0)
+ wq->queue_id = bf_get(lpfc_mbx_wq_create_q_id,
+ &wq_create->u.response);
+ else
+ wq->queue_id = bf_get(lpfc_mbx_wq_create_v1_q_id,
+ &wq_create->u.response_1);
+
if (wq->queue_id == 0xFFFF) {
status = -ENXIO;
goto out;
}
- if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE) {
- wq->db_format = bf_get(lpfc_mbx_wq_create_db_format,
- &wq_create->u.response);
- if ((wq->db_format != LPFC_DB_LIST_FORMAT) &&
- (wq->db_format != LPFC_DB_RING_FORMAT)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "3265 WQ[%d] doorbell format not "
- "supported: x%x\n", wq->queue_id,
- wq->db_format);
- status = -EINVAL;
- goto out;
- }
- pci_barset = bf_get(lpfc_mbx_wq_create_bar_set,
- &wq_create->u.response);
- bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba, pci_barset);
- if (!bar_memmap_p) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "3263 WQ[%d] failed to memmap pci "
- "barset:x%x\n", wq->queue_id,
- pci_barset);
- status = -ENOMEM;
- goto out;
- }
- db_offset = wq_create->u.response.doorbell_offset;
- if ((db_offset != LPFC_ULP0_WQ_DOORBELL) &&
- (db_offset != LPFC_ULP1_WQ_DOORBELL)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "3252 WQ[%d] doorbell offset not "
- "supported: x%x\n", wq->queue_id,
- db_offset);
- status = -EINVAL;
- goto out;
- }
- wq->db_regaddr = bar_memmap_p + db_offset;
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "3264 WQ[%d]: barset:x%x, offset:x%x, "
- "format:x%x\n", wq->queue_id, pci_barset,
- db_offset, wq->db_format);
+
+ wq->db_format = LPFC_DB_LIST_FORMAT;
+ if (wq_create_version == LPFC_Q_CREATE_VERSION_0) {
+ if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE) {
+ wq->db_format = bf_get(lpfc_mbx_wq_create_db_format,
+ &wq_create->u.response);
+ if ((wq->db_format != LPFC_DB_LIST_FORMAT) &&
+ (wq->db_format != LPFC_DB_RING_FORMAT)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3265 WQ[%d] doorbell format "
+ "not supported: x%x\n",
+ wq->queue_id, wq->db_format);
+ status = -EINVAL;
+ goto out;
+ }
+ pci_barset = bf_get(lpfc_mbx_wq_create_bar_set,
+ &wq_create->u.response);
+ bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba,
+ pci_barset);
+ if (!bar_memmap_p) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3263 WQ[%d] failed to memmap "
+ "pci barset:x%x\n",
+ wq->queue_id, pci_barset);
+ status = -ENOMEM;
+ goto out;
+ }
+ db_offset = wq_create->u.response.doorbell_offset;
+ if ((db_offset != LPFC_ULP0_WQ_DOORBELL) &&
+ (db_offset != LPFC_ULP1_WQ_DOORBELL)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3252 WQ[%d] doorbell offset "
+ "not supported: x%x\n",
+ wq->queue_id, db_offset);
+ status = -EINVAL;
+ goto out;
+ }
+ wq->db_regaddr = bar_memmap_p + db_offset;
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "3264 WQ[%d]: barset:x%x, offset:x%x, "
+ "format:x%x\n", wq->queue_id,
+ pci_barset, db_offset, wq->db_format);
+ } else
+ wq->db_regaddr = phba->sli4_hba.WQDBregaddr;
} else {
- wq->db_format = LPFC_DB_LIST_FORMAT;
- wq->db_regaddr = phba->sli4_hba.WQDBregaddr;
+ /* Check if DPP was honored by the firmware */
+ wq->dpp_enable = bf_get(lpfc_mbx_wq_create_dpp_rsp,
+ &wq_create->u.response_1);
+ if (wq->dpp_enable) {
+ pci_barset = bf_get(lpfc_mbx_wq_create_v1_bar_set,
+ &wq_create->u.response_1);
+ bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba,
+ pci_barset);
+ if (!bar_memmap_p) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3267 WQ[%d] failed to memmap "
+ "pci barset:x%x\n",
+ wq->queue_id, pci_barset);
+ status = -ENOMEM;
+ goto out;
+ }
+ db_offset = wq_create->u.response_1.doorbell_offset;
+ wq->db_regaddr = bar_memmap_p + db_offset;
+ wq->dpp_id = bf_get(lpfc_mbx_wq_create_dpp_id,
+ &wq_create->u.response_1);
+ dpp_barset = bf_get(lpfc_mbx_wq_create_dpp_bar,
+ &wq_create->u.response_1);
+ bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba,
+ dpp_barset);
+ if (!bar_memmap_p) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3268 WQ[%d] failed to memmap "
+ "pci barset:x%x\n",
+ wq->queue_id, dpp_barset);
+ status = -ENOMEM;
+ goto out;
+ }
+ dpp_offset = wq_create->u.response_1.dpp_offset;
+ wq->dpp_regaddr = bar_memmap_p + dpp_offset;
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "3271 WQ[%d]: barset:x%x, offset:x%x, "
+ "dpp_id:x%x dpp_barset:x%x "
+ "dpp_offset:x%x\n",
+ wq->queue_id, pci_barset, db_offset,
+ wq->dpp_id, dpp_barset, dpp_offset);
+
+ /* Enable combined writes for DPP aperture */
+ pg_addr = (unsigned long)(wq->dpp_regaddr) & PAGE_MASK;
+#ifdef CONFIG_X86
+ rc = set_memory_wc(pg_addr, 1);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3272 Cannot setup Combined "
+ "Write on WQ[%d] - disable DPP\n",
+ wq->queue_id);
+ phba->cfg_enable_dpp = 0;
+ }
+#else
+ phba->cfg_enable_dpp = 0;
+#endif
+ } else
+ wq->db_regaddr = phba->sli4_hba.WQDBregaddr;
}
wq->pring = kzalloc(sizeof(struct lpfc_sli_ring), GFP_KERNEL);
if (wq->pring == NULL) {
@@ -18616,6 +18892,7 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
"status x%x add_status x%x, mbx status x%x\n",
shdr_status, shdr_add_status, rc);
rc = -ENXIO;
+ *offset = shdr_add_status;
} else
*offset += wr_object->u.response.actual_write_length;
return rc;
@@ -18753,8 +19030,7 @@ lpfc_drain_txq(struct lpfc_hba *phba)
unsigned long iflags = 0;
char *fail_msg = NULL;
struct lpfc_sglq *sglq;
- union lpfc_wqe128 wqe128;
- union lpfc_wqe *wqe = (union lpfc_wqe *) &wqe128;
+ union lpfc_wqe128 wqe;
uint32_t txq_cnt = 0;
pring = lpfc_phba_elsring(phba);
@@ -18797,9 +19073,9 @@ lpfc_drain_txq(struct lpfc_hba *phba)
piocbq->sli4_xritag = sglq->sli4_xritag;
if (NO_XRI == lpfc_sli4_bpl2sgl(phba, piocbq, sglq))
fail_msg = "to convert bpl to sgl";
- else if (lpfc_sli4_iocb2wqe(phba, piocbq, wqe))
+ else if (lpfc_sli4_iocb2wqe(phba, piocbq, &wqe))
fail_msg = "to convert iocb to wqe";
- else if (lpfc_sli4_wq_put(phba->sli4_hba.els_wq, wqe))
+ else if (lpfc_sli4_wq_put(phba->sli4_hba.els_wq, &wqe))
fail_msg = " - Wq is full";
else
lpfc_sli_ringtxcmpl_put(phba, pring, piocbq);
@@ -18849,7 +19125,7 @@ lpfc_wqe_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeq,
struct ulp_bde64 bde;
struct sli4_sge *sgl = NULL;
struct lpfc_dmabuf *dmabuf;
- union lpfc_wqe *wqe;
+ union lpfc_wqe128 *wqe;
int numBdes = 0;
int i = 0;
uint32_t offset = 0; /* accumulated offset in the sg request list */
@@ -18958,7 +19234,7 @@ int
lpfc_sli4_issue_wqe(struct lpfc_hba *phba, uint32_t ring_number,
struct lpfc_iocbq *pwqe)
{
- union lpfc_wqe *wqe = &pwqe->wqe;
+ union lpfc_wqe128 *wqe = &pwqe->wqe;
struct lpfc_nvmet_rcv_ctx *ctxp;
struct lpfc_queue *wq;
struct lpfc_sglq *sglq;
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index a3b1b5145d2b..431754195505 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -61,9 +61,8 @@ struct lpfc_iocbq {
struct lpfc_wcqe_complete wcqe_cmpl; /* WQE cmpl */
uint64_t isr_timestamp;
- /* Be careful here */
- union lpfc_wqe wqe; /* WQE cmd */
- IOCB_t iocb; /* For IOCB cmd or if we want 128 byte WQE */
+ union lpfc_wqe128 wqe; /* SLI-4 */
+ IOCB_t iocb; /* SLI-3 */
uint8_t rsvd2;
uint8_t priority; /* OAS priority */
@@ -148,6 +147,7 @@ typedef struct lpfcMboxq {
struct lpfc_vport *vport;/* virtual port pointer */
void *context1; /* caller context information */
void *context2; /* caller context information */
+ void *context3;
void (*mbox_cmpl) (struct lpfc_hba *, struct lpfcMboxq *);
uint8_t mbox_flag;
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 81fb58e59e60..cf64aca82bd0 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2009-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -145,6 +145,7 @@ struct lpfc_rqb {
struct lpfc_queue {
struct list_head list;
struct list_head wq_list;
+ struct list_head wqfull_list;
enum lpfc_sli4_queue_type type;
enum lpfc_sli4_queue_subtype subtype;
struct lpfc_hba *phba;
@@ -173,10 +174,16 @@ struct lpfc_queue {
#define LPFC_EXPANDED_PAGE_SIZE 16384
#define LPFC_DEFAULT_PAGE_SIZE 4096
uint16_t chann; /* IO channel this queue is associated with */
- uint16_t db_format;
+ uint8_t db_format;
#define LPFC_DB_RING_FORMAT 0x01
#define LPFC_DB_LIST_FORMAT 0x02
+ uint8_t q_flag;
+#define HBA_NVMET_WQFULL 0x1 /* We hit WQ Full condition for NVMET */
void __iomem *db_regaddr;
+ uint16_t dpp_enable;
+ uint16_t dpp_id;
+ void __iomem *dpp_regaddr;
+
/* For q stats */
uint32_t q_cnt_1;
uint32_t q_cnt_2;
@@ -209,6 +216,7 @@ struct lpfc_queue {
struct work_struct spwork;
uint64_t isr_timestamp;
+ uint8_t qe_valid;
struct lpfc_queue *assoc_qp;
union sli4_qe qe[1]; /* array to index entries (must be last) */
};
@@ -479,12 +487,19 @@ struct lpfc_pc_sli4_params {
uint8_t mqv;
uint8_t wqv;
uint8_t rqv;
+ uint8_t eqav;
+ uint8_t cqav;
uint8_t wqsize;
#define LPFC_WQ_SZ64_SUPPORT 1
#define LPFC_WQ_SZ128_SUPPORT 2
uint8_t wqpcnt;
};
+#define LPFC_CQ_4K_PAGE_SZ 0x1
+#define LPFC_CQ_16K_PAGE_SZ 0x4
+#define LPFC_WQ_4K_PAGE_SZ 0x1
+#define LPFC_WQ_16K_PAGE_SZ 0x4
+
struct lpfc_iov {
uint32_t pf_number;
uint32_t vf_number;
@@ -516,11 +531,17 @@ struct lpfc_vector_map_info {
/* SLI4 HBA data structure entries */
struct lpfc_sli4_hba {
void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for
- PCI BAR0, config space registers */
+ * config space registers
+ */
void __iomem *ctrl_regs_memmap_p; /* Kernel memory mapped address for
- PCI BAR1, control registers */
+ * control registers
+ */
void __iomem *drbl_regs_memmap_p; /* Kernel memory mapped address for
- PCI BAR2, doorbell registers */
+ * doorbell registers
+ */
+ void __iomem *dpp_regs_memmap_p; /* Kernel memory mapped address for
+ * dpp registers
+ */
union {
struct {
/* IF Type 0, BAR 0 PCI cfg space reg mem map */
@@ -561,7 +582,8 @@ struct lpfc_sli4_hba {
/* IF type 0, BAR 0 and if type 2, BAR 0 doorbell register memory map */
void __iomem *RQDBregaddr; /* RQ_DOORBELL register */
void __iomem *WQDBregaddr; /* WQ_DOORBELL register */
- void __iomem *EQCQDBregaddr; /* EQCQ_DOORBELL register */
+ void __iomem *CQDBregaddr; /* CQ_DOORBELL register */
+ void __iomem *EQDBregaddr; /* EQ_DOORBELL register */
void __iomem *MQDBregaddr; /* MQ_DOORBELL register */
void __iomem *BMBXregaddr; /* BootStrap MBX register */
@@ -574,6 +596,10 @@ struct lpfc_sli4_hba {
struct lpfc_bbscn_params bbscn_params;
struct lpfc_hba_eq_hdl *hba_eq_hdl; /* HBA per-WQ handle */
+ void (*sli4_eq_clr_intr)(struct lpfc_queue *q);
+ uint32_t (*sli4_eq_release)(struct lpfc_queue *q, bool arm);
+ uint32_t (*sli4_cq_release)(struct lpfc_queue *q, bool arm);
+
/* Pointers to the constructed SLI4 queues */
struct lpfc_queue **hba_eq; /* Event queues for HBA */
struct lpfc_queue **fcp_cq; /* Fast-path FCP compl queue */
@@ -840,8 +866,12 @@ void lpfc_sli_remove_dflt_fcf(struct lpfc_hba *);
int lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *);
int lpfc_sli4_get_iocb_cnt(struct lpfc_hba *phba);
int lpfc_sli4_init_vpi(struct lpfc_vport *);
+inline void lpfc_sli4_eq_clr_intr(struct lpfc_queue *);
uint32_t lpfc_sli4_cq_release(struct lpfc_queue *, bool);
uint32_t lpfc_sli4_eq_release(struct lpfc_queue *, bool);
+inline void lpfc_sli4_if6_eq_clr_intr(struct lpfc_queue *q);
+uint32_t lpfc_sli4_if6_cq_release(struct lpfc_queue *q, bool arm);
+uint32_t lpfc_sli4_if6_eq_release(struct lpfc_queue *q, bool arm);
void lpfc_sli4_fcfi_unreg(struct lpfc_hba *, uint16_t);
int lpfc_sli4_fcf_scan_read_fcf_rec(struct lpfc_hba *, uint16_t);
int lpfc_sli4_fcf_rr_read_fcf_rec(struct lpfc_hba *, uint16_t);
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index c232bf0e8998..e8b089abbfb3 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -20,7 +20,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "11.4.0.6"
+#define LPFC_DRIVER_VERSION "12.0.0.1"
#define LPFC_DRIVER_NAME "lpfc"
/* Used for SLI 2/3 */
@@ -32,6 +32,6 @@
#define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \
LPFC_DRIVER_VERSION
-#define LPFC_COPYRIGHT "Copyright (C) 2017 Broadcom. All Rights Reserved. " \
- "The term \"Broadcom\" refers to Broadcom Limited " \
+#define LPFC_COPYRIGHT "Copyright (C) 2017-2018 Broadcom. All Rights " \
+ "Reserved. The term \"Broadcom\" refers to Broadcom Limited " \
"and/or its subsidiaries."
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 7a37ace4239b..b89c6e6c0589 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -4022,7 +4022,7 @@ static int megasas_create_frame_pool(struct megasas_instance *instance)
cmd = instance->cmd_list[i];
- cmd->frame = dma_pool_alloc(instance->frame_dma_pool,
+ cmd->frame = dma_pool_zalloc(instance->frame_dma_pool,
GFP_KERNEL, &cmd->frame_phys_addr);
cmd->sense = dma_pool_alloc(instance->sense_dma_pool,
@@ -4038,7 +4038,6 @@ static int megasas_create_frame_pool(struct megasas_instance *instance)
return -ENOMEM;
}
- memset(cmd->frame, 0, instance->mfi_frame_size);
cmd->frame->io.context = cpu_to_le32(cmd->index);
cmd->frame->io.pad_0 = 0;
if ((instance->adapter_type == MFI_SERIES) && reset_devices)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index ee117106d0f7..0ad88deb3176 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -524,6 +524,7 @@ typedef struct _MPI2_CONFIG_REPLY {
#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086)
#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087)
#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E)
+#define MPI2_MFGPAGE_DEVID_SAS2308_MPI_EP (0x02B0)
/*MPI v2.5 SAS products */
#define MPI25_MFGPAGE_DEVID_SAS3004 (0x0096)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 0aafbfd1b746..61f93a134956 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -126,6 +126,362 @@ module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug,
param_get_int, &mpt3sas_fwfault_debug, 0644);
/**
+ * _base_clone_reply_to_sys_mem - copies reply to reply free iomem
+ * in BAR0 space.
+ *
+ * @ioc: per adapter object
+ * @reply: reply message frame(lower 32bit addr)
+ * @index: System request message index.
+ *
+ * @Returns - Nothing
+ */
+static void
+_base_clone_reply_to_sys_mem(struct MPT3SAS_ADAPTER *ioc, u32 reply,
+ u32 index)
+{
+ /*
+ * 256 is offset within sys register.
+ * 256 offset MPI frame starts. Max MPI frame supported is 32.
+ * 32 * 128 = 4K. From here, Clone of reply free for mcpu starts
+ */
+ u16 cmd_credit = ioc->facts.RequestCredit + 1;
+ void __iomem *reply_free_iomem = (void __iomem *)ioc->chip +
+ MPI_FRAME_START_OFFSET +
+ (cmd_credit * ioc->request_sz) + (index * sizeof(u32));
+
+ writel(reply, reply_free_iomem);
+}
+
+/**
+ * _base_clone_mpi_to_sys_mem - Writes/copies MPI frames
+ * to system/BAR0 region.
+ *
+ * @dst_iomem: Pointer to the destinaltion location in BAR0 space.
+ * @src: Pointer to the Source data.
+ * @size: Size of data to be copied.
+ */
+static void
+_base_clone_mpi_to_sys_mem(void *dst_iomem, void *src, u32 size)
+{
+ int i;
+ u32 *src_virt_mem = (u32 *)src;
+
+ for (i = 0; i < size/4; i++)
+ writel((u32)src_virt_mem[i],
+ (void __iomem *)dst_iomem + (i * 4));
+}
+
+/**
+ * _base_clone_to_sys_mem - Writes/copies data to system/BAR0 region
+ *
+ * @dst_iomem: Pointer to the destination location in BAR0 space.
+ * @src: Pointer to the Source data.
+ * @size: Size of data to be copied.
+ */
+static void
+_base_clone_to_sys_mem(void __iomem *dst_iomem, void *src, u32 size)
+{
+ int i;
+ u32 *src_virt_mem = (u32 *)(src);
+
+ for (i = 0; i < size/4; i++)
+ writel((u32)src_virt_mem[i],
+ (void __iomem *)dst_iomem + (i * 4));
+}
+
+/**
+ * _base_get_chain - Calculates and Returns virtual chain address
+ * for the provided smid in BAR0 space.
+ *
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @sge_chain_count: Scatter gather chain count.
+ *
+ * @Return: chain address.
+ */
+static inline void __iomem*
+_base_get_chain(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+ u8 sge_chain_count)
+{
+ void __iomem *base_chain, *chain_virt;
+ u16 cmd_credit = ioc->facts.RequestCredit + 1;
+
+ base_chain = (void __iomem *)ioc->chip + MPI_FRAME_START_OFFSET +
+ (cmd_credit * ioc->request_sz) +
+ REPLY_FREE_POOL_SIZE;
+ chain_virt = base_chain + (smid * ioc->facts.MaxChainDepth *
+ ioc->request_sz) + (sge_chain_count * ioc->request_sz);
+ return chain_virt;
+}
+
+/**
+ * _base_get_chain_phys - Calculates and Returns physical address
+ * in BAR0 for scatter gather chains, for
+ * the provided smid.
+ *
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @sge_chain_count: Scatter gather chain count.
+ *
+ * @Return - Physical chain address.
+ */
+static inline phys_addr_t
+_base_get_chain_phys(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+ u8 sge_chain_count)
+{
+ phys_addr_t base_chain_phys, chain_phys;
+ u16 cmd_credit = ioc->facts.RequestCredit + 1;
+
+ base_chain_phys = ioc->chip_phys + MPI_FRAME_START_OFFSET +
+ (cmd_credit * ioc->request_sz) +
+ REPLY_FREE_POOL_SIZE;
+ chain_phys = base_chain_phys + (smid * ioc->facts.MaxChainDepth *
+ ioc->request_sz) + (sge_chain_count * ioc->request_sz);
+ return chain_phys;
+}
+
+/**
+ * _base_get_buffer_bar0 - Calculates and Returns BAR0 mapped Host
+ * buffer address for the provided smid.
+ * (Each smid can have 64K starts from 17024)
+ *
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * @Returns - Pointer to buffer location in BAR0.
+ */
+
+static void __iomem *
+_base_get_buffer_bar0(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ u16 cmd_credit = ioc->facts.RequestCredit + 1;
+ // Added extra 1 to reach end of chain.
+ void __iomem *chain_end = _base_get_chain(ioc,
+ cmd_credit + 1,
+ ioc->facts.MaxChainDepth);
+ return chain_end + (smid * 64 * 1024);
+}
+
+/**
+ * _base_get_buffer_phys_bar0 - Calculates and Returns BAR0 mapped
+ * Host buffer Physical address for the provided smid.
+ * (Each smid can have 64K starts from 17024)
+ *
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * @Returns - Pointer to buffer location in BAR0.
+ */
+static phys_addr_t
+_base_get_buffer_phys_bar0(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ u16 cmd_credit = ioc->facts.RequestCredit + 1;
+ phys_addr_t chain_end_phys = _base_get_chain_phys(ioc,
+ cmd_credit + 1,
+ ioc->facts.MaxChainDepth);
+ return chain_end_phys + (smid * 64 * 1024);
+}
+
+/**
+ * _base_get_chain_buffer_dma_to_chain_buffer - Iterates chain
+ * lookup list and Provides chain_buffer
+ * address for the matching dma address.
+ * (Each smid can have 64K starts from 17024)
+ *
+ * @ioc: per adapter object
+ * @chain_buffer_dma: Chain buffer dma address.
+ *
+ * @Returns - Pointer to chain buffer. Or Null on Failure.
+ */
+static void *
+_base_get_chain_buffer_dma_to_chain_buffer(struct MPT3SAS_ADAPTER *ioc,
+ dma_addr_t chain_buffer_dma)
+{
+ u16 index;
+
+ for (index = 0; index < ioc->chain_depth; index++) {
+ if (ioc->chain_lookup[index].chain_buffer_dma ==
+ chain_buffer_dma)
+ return ioc->chain_lookup[index].chain_buffer;
+ }
+ pr_info(MPT3SAS_FMT
+ "Provided chain_buffer_dma address is not in the lookup list\n",
+ ioc->name);
+ return NULL;
+}
+
+/**
+ * _clone_sg_entries - MPI EP's scsiio and config requests
+ * are handled here. Base function for
+ * double buffering, before submitting
+ * the requests.
+ *
+ * @ioc: per adapter object.
+ * @mpi_request: mf request pointer.
+ * @smid: system request message index.
+ *
+ * @Returns: Nothing.
+ */
+static void _clone_sg_entries(struct MPT3SAS_ADAPTER *ioc,
+ void *mpi_request, u16 smid)
+{
+ Mpi2SGESimple32_t *sgel, *sgel_next;
+ u32 sgl_flags, sge_chain_count = 0;
+ bool is_write = 0;
+ u16 i = 0;
+ void __iomem *buffer_iomem;
+ phys_addr_t buffer_iomem_phys;
+ void __iomem *buff_ptr;
+ phys_addr_t buff_ptr_phys;
+ void __iomem *dst_chain_addr[MCPU_MAX_CHAINS_PER_IO];
+ void *src_chain_addr[MCPU_MAX_CHAINS_PER_IO];
+ phys_addr_t dst_addr_phys;
+ MPI2RequestHeader_t *request_hdr;
+ struct scsi_cmnd *scmd;
+ struct scatterlist *sg_scmd = NULL;
+ int is_scsiio_req = 0;
+
+ request_hdr = (MPI2RequestHeader_t *) mpi_request;
+
+ if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST) {
+ Mpi25SCSIIORequest_t *scsiio_request =
+ (Mpi25SCSIIORequest_t *)mpi_request;
+ sgel = (Mpi2SGESimple32_t *) &scsiio_request->SGL;
+ is_scsiio_req = 1;
+ } else if (request_hdr->Function == MPI2_FUNCTION_CONFIG) {
+ Mpi2ConfigRequest_t *config_req =
+ (Mpi2ConfigRequest_t *)mpi_request;
+ sgel = (Mpi2SGESimple32_t *) &config_req->PageBufferSGE;
+ } else
+ return;
+
+ /* From smid we can get scsi_cmd, once we have sg_scmd,
+ * we just need to get sg_virt and sg_next to get virual
+ * address associated with sgel->Address.
+ */
+
+ if (is_scsiio_req) {
+ /* Get scsi_cmd using smid */
+ scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+ if (scmd == NULL) {
+ pr_err(MPT3SAS_FMT "scmd is NULL\n", ioc->name);
+ return;
+ }
+
+ /* Get sg_scmd from scmd provided */
+ sg_scmd = scsi_sglist(scmd);
+ }
+
+ /*
+ * 0 - 255 System register
+ * 256 - 4352 MPI Frame. (This is based on maxCredit 32)
+ * 4352 - 4864 Reply_free pool (512 byte is reserved
+ * considering maxCredit 32. Reply need extra
+ * room, for mCPU case kept four times of
+ * maxCredit).
+ * 4864 - 17152 SGE chain element. (32cmd * 3 chain of
+ * 128 byte size = 12288)
+ * 17152 - x Host buffer mapped with smid.
+ * (Each smid can have 64K Max IO.)
+ * BAR0+Last 1K MSIX Addr and Data
+ * Total size in use 2113664 bytes of 4MB BAR0
+ */
+
+ buffer_iomem = _base_get_buffer_bar0(ioc, smid);
+ buffer_iomem_phys = _base_get_buffer_phys_bar0(ioc, smid);
+
+ buff_ptr = buffer_iomem;
+ buff_ptr_phys = buffer_iomem_phys;
+ WARN_ON(buff_ptr_phys > U32_MAX);
+
+ if (sgel->FlagsLength &
+ (MPI2_SGE_FLAGS_HOST_TO_IOC << MPI2_SGE_FLAGS_SHIFT))
+ is_write = 1;
+
+ for (i = 0; i < MPT_MIN_PHYS_SEGMENTS + ioc->facts.MaxChainDepth; i++) {
+
+ sgl_flags = (sgel->FlagsLength >> MPI2_SGE_FLAGS_SHIFT);
+
+ switch (sgl_flags & MPI2_SGE_FLAGS_ELEMENT_MASK) {
+ case MPI2_SGE_FLAGS_CHAIN_ELEMENT:
+ /*
+ * Helper function which on passing
+ * chain_buffer_dma returns chain_buffer. Get
+ * the virtual address for sgel->Address
+ */
+ sgel_next =
+ _base_get_chain_buffer_dma_to_chain_buffer(ioc,
+ sgel->Address);
+ if (sgel_next == NULL)
+ return;
+ /*
+ * This is coping 128 byte chain
+ * frame (not a host buffer)
+ */
+ dst_chain_addr[sge_chain_count] =
+ _base_get_chain(ioc,
+ smid, sge_chain_count);
+ src_chain_addr[sge_chain_count] =
+ (void *) sgel_next;
+ dst_addr_phys = _base_get_chain_phys(ioc,
+ smid, sge_chain_count);
+ WARN_ON(dst_addr_phys > U32_MAX);
+ sgel->Address = (u32)dst_addr_phys;
+ sgel = sgel_next;
+ sge_chain_count++;
+ break;
+ case MPI2_SGE_FLAGS_SIMPLE_ELEMENT:
+ if (is_write) {
+ if (is_scsiio_req) {
+ _base_clone_to_sys_mem(buff_ptr,
+ sg_virt(sg_scmd),
+ (sgel->FlagsLength & 0x00ffffff));
+ /*
+ * FIXME: this relies on a a zero
+ * PCI mem_offset.
+ */
+ sgel->Address = (u32)buff_ptr_phys;
+ } else {
+ _base_clone_to_sys_mem(buff_ptr,
+ ioc->config_vaddr,
+ (sgel->FlagsLength & 0x00ffffff));
+ sgel->Address = (u32)buff_ptr_phys;
+ }
+ }
+ buff_ptr += (sgel->FlagsLength & 0x00ffffff);
+ buff_ptr_phys += (sgel->FlagsLength & 0x00ffffff);
+ if ((sgel->FlagsLength &
+ (MPI2_SGE_FLAGS_END_OF_BUFFER
+ << MPI2_SGE_FLAGS_SHIFT)))
+ goto eob_clone_chain;
+ else {
+ /*
+ * Every single element in MPT will have
+ * associated sg_next. Better to sanity that
+ * sg_next is not NULL, but it will be a bug
+ * if it is null.
+ */
+ if (is_scsiio_req) {
+ sg_scmd = sg_next(sg_scmd);
+ if (sg_scmd)
+ sgel++;
+ else
+ goto eob_clone_chain;
+ }
+ }
+ break;
+ }
+ }
+
+eob_clone_chain:
+ for (i = 0; i < sge_chain_count; i++) {
+ if (is_scsiio_req)
+ _base_clone_to_sys_mem(dst_chain_addr[i],
+ src_chain_addr[i], ioc->request_sz);
+ }
+}
+
+/**
* mpt3sas_remove_dead_ioc_func - kthread context to remove dead ioc
* @arg: input argument, used to derive ioc
*
@@ -875,7 +1231,7 @@ _base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
ack_request->EventContext = mpi_reply->EventContext;
ack_request->VF_ID = 0; /* TODO */
ack_request->VP_ID = 0;
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
out:
@@ -1075,6 +1431,10 @@ _base_interrupt(int irq, void *bus_id)
0 : ioc->reply_free_host_index + 1;
ioc->reply_free[ioc->reply_free_host_index] =
cpu_to_le32(reply);
+ if (ioc->is_mcpu_endpoint)
+ _base_clone_reply_to_sys_mem(ioc,
+ cpu_to_le32(reply),
+ ioc->reply_free_host_index);
writel(ioc->reply_free_host_index,
&ioc->chip->ReplyFreeHostIndex);
}
@@ -2214,6 +2574,9 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev)
struct sysinfo s;
u64 consistent_dma_mask;
+ if (ioc->is_mcpu_endpoint)
+ goto try_32bit;
+
if (ioc->dma_mask)
consistent_dma_mask = DMA_BIT_MASK(64);
else
@@ -2232,6 +2595,7 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev)
}
}
+ try_32bit:
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
&& !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
ioc->base_add_sg_single = &_base_add_sg_single_32;
@@ -2581,7 +2945,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
u32 pio_sz;
int i, r = 0;
u64 pio_chip = 0;
- u64 chip_phys = 0;
+ phys_addr_t chip_phys = 0;
struct adapter_reply_queue *reply_q;
dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n",
@@ -2629,7 +2993,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
if (memap_sz)
continue;
ioc->chip_phys = pci_resource_start(pdev, i);
- chip_phys = (u64)ioc->chip_phys;
+ chip_phys = ioc->chip_phys;
memap_sz = pci_resource_len(pdev, i);
ioc->chip = ioremap(ioc->chip_phys, memap_sz);
}
@@ -2704,8 +3068,8 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
"IO-APIC enabled"),
pci_irq_vector(ioc->pdev, reply_q->msix_index));
- pr_info(MPT3SAS_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n",
- ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz);
+ pr_info(MPT3SAS_FMT "iomem(%pap), mapped(0x%p), size(%d)\n",
+ ioc->name, &chip_phys, ioc->chip, memap_sz);
pr_info(MPT3SAS_FMT "ioport(0x%016llx), size(%d)\n",
ioc->name, (unsigned long long)pio_chip, pio_sz);
@@ -2961,6 +3325,29 @@ mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
}
/**
+ * _base_mpi_ep_writeq - 32 bit write to MMIO
+ * @b: data payload
+ * @addr: address in MMIO space
+ * @writeq_lock: spin lock
+ *
+ * This special handling for MPI EP to take care of 32 bit
+ * environment where its not quarenteed to send the entire word
+ * in one transfer.
+ */
+static inline void
+_base_mpi_ep_writeq(__u64 b, volatile void __iomem *addr,
+ spinlock_t *writeq_lock)
+{
+ unsigned long flags;
+ __u64 data_out = cpu_to_le64(b);
+
+ spin_lock_irqsave(writeq_lock, flags);
+ writel((u32)(data_out), addr);
+ writel((u32)(data_out >> 32), (addr + 4));
+ spin_unlock_irqrestore(writeq_lock, flags);
+}
+
+/**
* _base_writeq - 64 bit write to MMIO
* @ioc: per adapter object
* @b: data payload
@@ -2981,17 +3368,41 @@ _base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
static inline void
_base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
{
- unsigned long flags;
- __u64 data_out = cpu_to_le64(b);
-
- spin_lock_irqsave(writeq_lock, flags);
- writel((u32)(data_out), addr);
- writel((u32)(data_out >> 32), (addr + 4));
- spin_unlock_irqrestore(writeq_lock, flags);
+ _base_mpi_ep_writeq(b, addr, writeq_lock);
}
#endif
/**
+ * _base_put_smid_mpi_ep_scsi_io - send SCSI_IO request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle
+ *
+ * Return nothing.
+ */
+static void
+_base_put_smid_mpi_ep_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle)
+{
+ Mpi2RequestDescriptorUnion_t descriptor;
+ u64 *request = (u64 *)&descriptor;
+ void *mpi_req_iomem;
+ __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
+
+ _clone_sg_entries(ioc, (void *) mfp, smid);
+ mpi_req_iomem = (void *)ioc->chip +
+ MPI_FRAME_START_OFFSET + (smid * ioc->request_sz);
+ _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
+ ioc->request_sz);
+ descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
+ descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc);
+ descriptor.SCSIIO.SMID = cpu_to_le16(smid);
+ descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
+ descriptor.SCSIIO.LMID = 0;
+ _base_mpi_ep_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+}
+
+/**
* _base_put_smid_scsi_io - send SCSI_IO request to firmware
* @ioc: per adapter object
* @smid: system request message index
@@ -3016,15 +3427,15 @@ _base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle)
}
/**
- * _base_put_smid_fast_path - send fast path request to firmware
+ * mpt3sas_base_put_smid_fast_path - send fast path request to firmware
* @ioc: per adapter object
* @smid: system request message index
* @handle: device handle
*
* Return nothing.
*/
-static void
-_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+void
+mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid,
u16 handle)
{
Mpi2RequestDescriptorUnion_t descriptor;
@@ -3041,18 +3452,34 @@ _base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid,
}
/**
- * _base_put_smid_hi_priority - send Task Management request to firmware
+ * mpt3sas_base_put_smid_hi_priority - send Task Management request to firmware
* @ioc: per adapter object
* @smid: system request message index
* @msix_task: msix_task will be same as msix of IO incase of task abort else 0.
* Return nothing.
*/
-static void
-_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+void
+mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid,
u16 msix_task)
{
Mpi2RequestDescriptorUnion_t descriptor;
- u64 *request = (u64 *)&descriptor;
+ void *mpi_req_iomem;
+ u64 *request;
+
+ if (ioc->is_mcpu_endpoint) {
+ MPI2RequestHeader_t *request_hdr;
+
+ __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
+
+ request_hdr = (MPI2RequestHeader_t *)mfp;
+ /* TBD 256 is offset within sys register. */
+ mpi_req_iomem = (void *)ioc->chip + MPI_FRAME_START_OFFSET
+ + (smid * ioc->request_sz);
+ _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
+ ioc->request_sz);
+ }
+
+ request = (u64 *)&descriptor;
descriptor.HighPriority.RequestFlags =
MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
@@ -3060,20 +3487,25 @@ _base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid,
descriptor.HighPriority.SMID = cpu_to_le16(smid);
descriptor.HighPriority.LMID = 0;
descriptor.HighPriority.Reserved1 = 0;
- _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
- &ioc->scsi_lookup_lock);
+ if (ioc->is_mcpu_endpoint)
+ _base_mpi_ep_writeq(*request,
+ &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+ else
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
}
/**
- * _base_put_smid_nvme_encap - send NVMe encapsulated request to
+ * mpt3sas_base_put_smid_nvme_encap - send NVMe encapsulated request to
* firmware
* @ioc: per adapter object
* @smid: system request message index
*
* Return nothing.
*/
-static void
-_base_put_smid_nvme_encap(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+void
+mpt3sas_base_put_smid_nvme_encap(struct MPT3SAS_ADAPTER *ioc, u16 smid)
{
Mpi2RequestDescriptorUnion_t descriptor;
u64 *request = (u64 *)&descriptor;
@@ -3089,135 +3521,45 @@ _base_put_smid_nvme_encap(struct MPT3SAS_ADAPTER *ioc, u16 smid)
}
/**
- * _base_put_smid_default - Default, primarily used for config pages
+ * mpt3sas_base_put_smid_default - Default, primarily used for config pages
* @ioc: per adapter object
* @smid: system request message index
*
* Return nothing.
*/
-static void
-_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+void
+mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid)
{
Mpi2RequestDescriptorUnion_t descriptor;
- u64 *request = (u64 *)&descriptor;
+ void *mpi_req_iomem;
+ u64 *request;
+ MPI2RequestHeader_t *request_hdr;
+
+ if (ioc->is_mcpu_endpoint) {
+ __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
+ request_hdr = (MPI2RequestHeader_t *)mfp;
+
+ _clone_sg_entries(ioc, (void *) mfp, smid);
+ /* TBD 256 is offset within sys register */
+ mpi_req_iomem = (void *)ioc->chip +
+ MPI_FRAME_START_OFFSET + (smid * ioc->request_sz);
+ _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
+ ioc->request_sz);
+ }
+ request = (u64 *)&descriptor;
descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
descriptor.Default.MSIxIndex = _base_get_msix_index(ioc);
descriptor.Default.SMID = cpu_to_le16(smid);
descriptor.Default.LMID = 0;
descriptor.Default.DescriptorTypeDependent = 0;
- _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
- &ioc->scsi_lookup_lock);
-}
-
-/**
-* _base_put_smid_scsi_io_atomic - send SCSI_IO request to firmware using
-* Atomic Request Descriptor
-* @ioc: per adapter object
-* @smid: system request message index
-* @handle: device handle, unused in this function, for function type match
-*
-* Return nothing.
-*/
-static void
-_base_put_smid_scsi_io_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid,
- u16 handle)
-{
- Mpi26AtomicRequestDescriptor_t descriptor;
- u32 *request = (u32 *)&descriptor;
-
- descriptor.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
- descriptor.MSIxIndex = _base_get_msix_index(ioc);
- descriptor.SMID = cpu_to_le16(smid);
-
- writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost);
-}
-
-/**
- * _base_put_smid_fast_path_atomic - send fast path request to firmware
- * using Atomic Request Descriptor
- * @ioc: per adapter object
- * @smid: system request message index
- * @handle: device handle, unused in this function, for function type match
- * Return nothing
- */
-static void
-_base_put_smid_fast_path_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid,
- u16 handle)
-{
- Mpi26AtomicRequestDescriptor_t descriptor;
- u32 *request = (u32 *)&descriptor;
-
- descriptor.RequestFlags = MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO;
- descriptor.MSIxIndex = _base_get_msix_index(ioc);
- descriptor.SMID = cpu_to_le16(smid);
-
- writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost);
-}
-
-/**
- * _base_put_smid_hi_priority_atomic - send Task Management request to
- * firmware using Atomic Request Descriptor
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_task: msix_task will be same as msix of IO incase of task abort else 0
- *
- * Return nothing.
- */
-static void
-_base_put_smid_hi_priority_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid,
- u16 msix_task)
-{
- Mpi26AtomicRequestDescriptor_t descriptor;
- u32 *request = (u32 *)&descriptor;
-
- descriptor.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
- descriptor.MSIxIndex = msix_task;
- descriptor.SMID = cpu_to_le16(smid);
-
- writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost);
-}
-
-/**
- * _base_put_smid_nvme_encap_atomic - send NVMe encapsulated request to
- * firmware using Atomic Request Descriptor
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Return nothing.
- */
-static void
-_base_put_smid_nvme_encap_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid)
-{
- Mpi26AtomicRequestDescriptor_t descriptor;
- u32 *request = (u32 *)&descriptor;
-
- descriptor.RequestFlags = MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED;
- descriptor.MSIxIndex = _base_get_msix_index(ioc);
- descriptor.SMID = cpu_to_le16(smid);
-
- writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost);
-}
-
-/**
- * _base_put_smid_default - Default, primarily used for config pages
- * use Atomic Request Descriptor
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Return nothing.
- */
-static void
-_base_put_smid_default_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid)
-{
- Mpi26AtomicRequestDescriptor_t descriptor;
- u32 *request = (u32 *)&descriptor;
-
- descriptor.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
- descriptor.MSIxIndex = _base_get_msix_index(ioc);
- descriptor.SMID = cpu_to_le16(smid);
-
- writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost);
+ if (ioc->is_mcpu_endpoint)
+ _base_mpi_ep_writeq(*request,
+ &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+ else
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
}
/**
@@ -3890,17 +4232,21 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
sg_tablesize = min_t(unsigned short, sg_tablesize,
MPT_KDUMP_MIN_PHYS_SEGMENTS);
- if (sg_tablesize < MPT_MIN_PHYS_SEGMENTS)
- sg_tablesize = MPT_MIN_PHYS_SEGMENTS;
- else if (sg_tablesize > MPT_MAX_PHYS_SEGMENTS) {
- sg_tablesize = min_t(unsigned short, sg_tablesize,
- SG_MAX_SEGMENTS);
- pr_warn(MPT3SAS_FMT
- "sg_tablesize(%u) is bigger than kernel"
- " defined SG_CHUNK_SIZE(%u)\n", ioc->name,
- sg_tablesize, MPT_MAX_PHYS_SEGMENTS);
+ if (ioc->is_mcpu_endpoint)
+ ioc->shost->sg_tablesize = MPT_MIN_PHYS_SEGMENTS;
+ else {
+ if (sg_tablesize < MPT_MIN_PHYS_SEGMENTS)
+ sg_tablesize = MPT_MIN_PHYS_SEGMENTS;
+ else if (sg_tablesize > MPT_MAX_PHYS_SEGMENTS) {
+ sg_tablesize = min_t(unsigned short, sg_tablesize,
+ SG_MAX_SEGMENTS);
+ pr_warn(MPT3SAS_FMT
+ "sg_tablesize(%u) is bigger than kernel "
+ "defined SG_CHUNK_SIZE(%u)\n", ioc->name,
+ sg_tablesize, MPT_MAX_PHYS_SEGMENTS);
+ }
+ ioc->shost->sg_tablesize = sg_tablesize;
}
- ioc->shost->sg_tablesize = sg_tablesize;
ioc->internal_depth = min_t(int, (facts->HighPriorityCredit + (5)),
(facts->RequestCredit / 4));
@@ -3985,13 +4331,18 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
/* reply free queue sizing - taking into account for 64 FW events */
ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
- /* calculate reply descriptor post queue depth */
- ioc->reply_post_queue_depth = ioc->hba_queue_depth +
- ioc->reply_free_queue_depth + 1 ;
- /* align the reply post queue on the next 16 count boundary */
- if (ioc->reply_post_queue_depth % 16)
- ioc->reply_post_queue_depth += 16 -
- (ioc->reply_post_queue_depth % 16);
+ /* mCPU manage single counters for simplicity */
+ if (ioc->is_mcpu_endpoint)
+ ioc->reply_post_queue_depth = ioc->reply_free_queue_depth;
+ else {
+ /* calculate reply descriptor post queue depth */
+ ioc->reply_post_queue_depth = ioc->hba_queue_depth +
+ ioc->reply_free_queue_depth + 1;
+ /* align the reply post queue on the next 16 count boundary */
+ if (ioc->reply_post_queue_depth % 16)
+ ioc->reply_post_queue_depth += 16 -
+ (ioc->reply_post_queue_depth % 16);
+ }
if (ioc->reply_post_queue_depth >
facts->MaxReplyDescriptorPostQueueDepth) {
@@ -4789,7 +5140,7 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
ioc->ioc_link_reset_in_progress = 1;
init_completion(&ioc->base_cmds.done);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->base_cmds.done,
msecs_to_jiffies(10000));
if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
@@ -4889,7 +5240,7 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
ioc->base_cmds.smid = smid;
memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
init_completion(&ioc->base_cmds.done);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->base_cmds.done,
msecs_to_jiffies(10000));
if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
@@ -5074,8 +5425,6 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc)
if ((facts->IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE) && (!reset_devices))
ioc->rdpq_array_capable = 1;
- if (facts->IOCCapabilities & MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ)
- ioc->atomic_desc_capable = 1;
facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
facts->IOCRequestFrameSize =
le16_to_cpu(mpi_reply.IOCRequestFrameSize);
@@ -5317,7 +5666,7 @@ _base_send_port_enable(struct MPT3SAS_ADAPTER *ioc)
mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
init_completion(&ioc->port_enable_cmds.done);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->port_enable_cmds.done, 300*HZ);
if (!(ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE)) {
pr_err(MPT3SAS_FMT "%s: timeout\n",
@@ -5380,7 +5729,7 @@ mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc)
memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
return 0;
}
@@ -5499,7 +5848,7 @@ _base_event_notification(struct MPT3SAS_ADAPTER *ioc)
mpi_request->EventMasks[i] =
cpu_to_le32(ioc->event_masks[i]);
init_completion(&ioc->base_cmds.done);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
pr_err(MPT3SAS_FMT "%s: timeout\n",
@@ -5819,8 +6168,12 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc)
/* initialize Reply Free Queue */
for (i = 0, reply_address = (u32)ioc->reply_dma ;
i < ioc->reply_free_queue_depth ; i++, reply_address +=
- ioc->reply_sz)
+ ioc->reply_sz) {
ioc->reply_free[i] = cpu_to_le32(reply_address);
+ if (ioc->is_mcpu_endpoint)
+ _base_clone_reply_to_sys_mem(ioc,
+ (__le32)reply_address, i);
+ }
/* initialize reply queues */
if (ioc->is_driver_loading)
@@ -6009,20 +6362,10 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
break;
}
- if (ioc->atomic_desc_capable) {
- ioc->put_smid_default = &_base_put_smid_default_atomic;
- ioc->put_smid_scsi_io = &_base_put_smid_scsi_io_atomic;
- ioc->put_smid_fast_path = &_base_put_smid_fast_path_atomic;
- ioc->put_smid_hi_priority = &_base_put_smid_hi_priority_atomic;
- ioc->put_smid_nvme_encap = &_base_put_smid_nvme_encap_atomic;
- } else {
- ioc->put_smid_default = &_base_put_smid_default;
+ if (ioc->is_mcpu_endpoint)
+ ioc->put_smid_scsi_io = &_base_put_smid_mpi_ep_scsi_io;
+ else
ioc->put_smid_scsi_io = &_base_put_smid_scsi_io;
- ioc->put_smid_fast_path = &_base_put_smid_fast_path;
- ioc->put_smid_hi_priority = &_base_put_smid_hi_priority;
- ioc->put_smid_nvme_encap = &_base_put_smid_nvme_encap;
- }
-
/*
* These function pointers for other requests that don't
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 99ccf83b8c51..ae36d8fb2f2b 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -95,6 +95,8 @@
#define MPT_MIN_PHYS_SEGMENTS 16
#define MPT_KDUMP_MIN_PHYS_SEGMENTS 32
+#define MCPU_MAX_CHAINS_PER_IO 3
+
#ifdef CONFIG_SCSI_MPT3SAS_MAX_SGE
#define MPT3SAS_SG_DEPTH CONFIG_SCSI_MPT3SAS_MAX_SGE
#else
@@ -120,6 +122,8 @@
#define MPT3SAS_NVME_QUEUE_DEPTH 128
#define MPT_NAME_LENGTH 32 /* generic length of strings */
#define MPT_STRING_LENGTH 64
+#define MPI_FRAME_START_OFFSET 256
+#define REPLY_FREE_POOL_SIZE 512 /*(32 maxcredix *4)*(4 times)*/
#define MPT_MAX_CALLBACKS 32
@@ -1099,7 +1103,7 @@ struct MPT3SAS_ADAPTER {
char tmp_string[MPT_STRING_LENGTH];
struct pci_dev *pdev;
Mpi2SystemInterfaceRegs_t __iomem *chip;
- resource_size_t chip_phys;
+ phys_addr_t chip_phys;
int logging_level;
int fwfault_debug;
u8 ir_firmware;
@@ -1236,6 +1240,7 @@ struct MPT3SAS_ADAPTER {
u16 config_page_sz;
void *config_page;
dma_addr_t config_page_dma;
+ void *config_vaddr;
/* scsiio request */
u16 hba_queue_depth;
@@ -1336,6 +1341,7 @@ struct MPT3SAS_ADAPTER {
u32 ring_buffer_offset;
u32 ring_buffer_sz;
u8 is_warpdrive;
+ u8 is_mcpu_endpoint;
u8 hide_ir_msg;
u8 mfg_pg10_hide_flag;
u8 hide_drives;
@@ -1348,12 +1354,7 @@ struct MPT3SAS_ADAPTER {
void *device_remove_in_progress;
u16 device_remove_in_progress_sz;
u8 is_gen35_ioc;
- u8 atomic_desc_capable;
PUT_SMID_IO_FP_HIP put_smid_scsi_io;
- PUT_SMID_IO_FP_HIP put_smid_fast_path;
- PUT_SMID_IO_FP_HIP put_smid_hi_priority;
- PUT_SMID_DEFAULT put_smid_default;
- PUT_SMID_DEFAULT put_smid_nvme_encap;
};
@@ -1394,6 +1395,12 @@ void *mpt3sas_base_get_pcie_sgl(struct MPT3SAS_ADAPTER *ioc, u16 smid);
dma_addr_t mpt3sas_base_get_pcie_sgl_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid);
void mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+ u16 handle);
+void mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+ u16 msix_task);
+void mpt3sas_base_put_smid_nvme_encap(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid);
/* hi-priority queue */
u16 mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx);
u16 mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx,
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index 1c747cf419d5..e87c76a832f6 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -219,6 +219,7 @@ _config_alloc_config_dma_memory(struct MPT3SAS_ADAPTER *ioc,
mem->page = ioc->config_page;
mem->page_dma = ioc->config_page_dma;
}
+ ioc->config_vaddr = mem->page;
return r;
}
@@ -402,7 +403,7 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t));
_config_display_some_debug(ioc, smid, "config_request", NULL);
init_completion(&ioc->config_cmds.done);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->config_cmds.done, timeout*HZ);
if (!(ioc->config_cmds.status & MPT3_CMD_COMPLETE)) {
pr_err(MPT3SAS_FMT "%s: timeout\n",
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 523971aeb4c1..d3cb387ba9f4 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -820,7 +820,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
ret = -EINVAL;
goto out;
}
- ioc->put_smid_nvme_encap(ioc, smid);
+ mpt3sas_base_put_smid_nvme_encap(ioc, smid);
break;
}
case MPI2_FUNCTION_SCSI_IO_REQUEST:
@@ -845,7 +845,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)
ioc->put_smid_scsi_io(ioc, smid, device_handle);
else
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
break;
}
case MPI2_FUNCTION_SCSI_TASK_MGMT:
@@ -882,7 +882,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
tm_request->DevHandle));
ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
data_in_dma, data_in_sz);
- ioc->put_smid_hi_priority(ioc, smid, 0);
+ mpt3sas_base_put_smid_hi_priority(ioc, smid, 0);
break;
}
case MPI2_FUNCTION_SMP_PASSTHROUGH:
@@ -913,7 +913,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
}
ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
data_in_sz);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
break;
}
case MPI2_FUNCTION_SATA_PASSTHROUGH:
@@ -928,7 +928,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
}
ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
data_in_sz);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
break;
}
case MPI2_FUNCTION_FW_DOWNLOAD:
@@ -936,7 +936,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
{
ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
data_in_sz);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
break;
}
case MPI2_FUNCTION_TOOLBOX:
@@ -951,7 +951,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
data_in_dma, data_in_sz);
}
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
break;
}
case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
@@ -970,7 +970,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
default:
ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
data_in_dma, data_in_sz);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
break;
}
@@ -1601,7 +1601,7 @@ _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
cpu_to_le32(ioc->product_specific[buffer_type][i]);
init_completion(&ioc->ctl_cmds.done);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
@@ -1948,7 +1948,7 @@ mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
mpi_request->VP_ID = 0;
init_completion(&ioc->ctl_cmds.done);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
@@ -2215,7 +2215,7 @@ _ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
mpi_request->VP_ID = 0;
init_completion(&ioc->ctl_cmds.done);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index aee1a0e1c600..8cd3782fab49 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2679,7 +2679,7 @@ mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN);
mpt3sas_scsih_set_tm_flag(ioc, handle);
init_completion(&ioc->tm_cmds.done);
- ioc->put_smid_hi_priority(ioc, smid, msix_task);
+ mpt3sas_base_put_smid_hi_priority(ioc, smid, msix_task);
wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
if (!(ioc->tm_cmds.status & MPT3_CMD_COMPLETE)) {
pr_err(MPT3SAS_FMT "%s: timeout\n",
@@ -3641,7 +3641,7 @@ _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
mpi_request->DevHandle = cpu_to_le16(handle);
mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
set_bit(handle, ioc->device_remove_in_progress);
- ioc->put_smid_hi_priority(ioc, smid, 0);
+ mpt3sas_base_put_smid_hi_priority(ioc, smid, 0);
mpt3sas_trigger_master(ioc, MASTER_TRIGGER_DEVICE_REMOVAL);
out:
@@ -3742,7 +3742,7 @@ _scsih_tm_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
mpi_request->DevHandle = mpi_request_tm->DevHandle;
- ioc->put_smid_default(ioc, smid_sas_ctrl);
+ mpt3sas_base_put_smid_default(ioc, smid_sas_ctrl);
return _scsih_check_for_pending_tm(ioc, smid);
}
@@ -3837,7 +3837,7 @@ _scsih_tm_tr_volume_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
mpi_request->DevHandle = cpu_to_le16(handle);
mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
- ioc->put_smid_hi_priority(ioc, smid, 0);
+ mpt3sas_base_put_smid_hi_priority(ioc, smid, 0);
}
/**
@@ -3929,7 +3929,7 @@ _scsih_issue_delayed_event_ack(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 event,
ack_request->EventContext = event_context;
ack_request->VF_ID = 0; /* TODO */
ack_request->VP_ID = 0;
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
}
/**
@@ -3986,7 +3986,7 @@ _scsih_issue_delayed_sas_io_unit_ctrl(struct MPT3SAS_ADAPTER *ioc,
mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
mpi_request->DevHandle = handle;
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
}
/**
@@ -4715,12 +4715,12 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
if (sas_target_priv_data->flags & MPT_TARGET_FASTPATH_IO) {
mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len |
MPI25_SCSIIO_IOFLAGS_FAST_PATH);
- ioc->put_smid_fast_path(ioc, smid, handle);
+ mpt3sas_base_put_smid_fast_path(ioc, smid, handle);
} else
ioc->put_smid_scsi_io(ioc, smid,
le16_to_cpu(mpi_request->DevHandle));
} else
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
return 0;
out:
@@ -7609,7 +7609,7 @@ _scsih_ir_fastpath(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phys_disk_num)
handle, phys_disk_num));
init_completion(&ioc->scsih_cmds.done);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
@@ -9700,7 +9700,7 @@ _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc)
if (!ioc->hide_ir_msg)
pr_info(MPT3SAS_FMT "IR shutdown (sending)\n", ioc->name);
init_completion(&ioc->scsih_cmds.done);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
@@ -10346,6 +10346,7 @@ _scsih_determine_hba_mpi_version(struct pci_dev *pdev)
case MPI2_MFGPAGE_DEVID_SAS2308_1:
case MPI2_MFGPAGE_DEVID_SAS2308_2:
case MPI2_MFGPAGE_DEVID_SAS2308_3:
+ case MPI2_MFGPAGE_DEVID_SAS2308_MPI_EP:
return MPI2_VERSION;
case MPI25_MFGPAGE_DEVID_SAS3004:
case MPI25_MFGPAGE_DEVID_SAS3008:
@@ -10423,11 +10424,18 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->hba_mpi_version_belonged = hba_mpi_version;
ioc->id = mpt2_ids++;
sprintf(ioc->driver_name, "%s", MPT2SAS_DRIVER_NAME);
- if (pdev->device == MPI2_MFGPAGE_DEVID_SSS6200) {
+ switch (pdev->device) {
+ case MPI2_MFGPAGE_DEVID_SSS6200:
ioc->is_warpdrive = 1;
ioc->hide_ir_msg = 1;
- } else
+ break;
+ case MPI2_MFGPAGE_DEVID_SAS2308_MPI_EP:
+ ioc->is_mcpu_endpoint = 1;
+ break;
+ default:
ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS;
+ break;
+ }
break;
case MPI25_VERSION:
case MPI26_VERSION:
@@ -10524,26 +10532,34 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
shost->transportt = mpt3sas_transport_template;
shost->unique_id = ioc->id;
- if (max_sectors != 0xFFFF) {
- if (max_sectors < 64) {
- shost->max_sectors = 64;
- pr_warn(MPT3SAS_FMT "Invalid value %d passed " \
- "for max_sectors, range is 64 to 32767. Assigning "
- "value of 64.\n", ioc->name, max_sectors);
- } else if (max_sectors > 32767) {
- shost->max_sectors = 32767;
- pr_warn(MPT3SAS_FMT "Invalid value %d passed " \
- "for max_sectors, range is 64 to 32767. Assigning "
- "default value of 32767.\n", ioc->name,
- max_sectors);
- } else {
- shost->max_sectors = max_sectors & 0xFFFE;
- pr_info(MPT3SAS_FMT
+ if (ioc->is_mcpu_endpoint) {
+ /* mCPU MPI support 64K max IO */
+ shost->max_sectors = 128;
+ pr_info(MPT3SAS_FMT
"The max_sectors value is set to %d\n",
ioc->name, shost->max_sectors);
+ } else {
+ if (max_sectors != 0xFFFF) {
+ if (max_sectors < 64) {
+ shost->max_sectors = 64;
+ pr_warn(MPT3SAS_FMT "Invalid value %d passed " \
+ "for max_sectors, range is 64 to 32767. " \
+ "Assigning value of 64.\n", \
+ ioc->name, max_sectors);
+ } else if (max_sectors > 32767) {
+ shost->max_sectors = 32767;
+ pr_warn(MPT3SAS_FMT "Invalid value %d passed " \
+ "for max_sectors, range is 64 to 32767." \
+ "Assigning default value of 32767.\n", \
+ ioc->name, max_sectors);
+ } else {
+ shost->max_sectors = max_sectors & 0xFFFE;
+ pr_info(MPT3SAS_FMT
+ "The max_sectors value is set to %d\n",
+ ioc->name, shost->max_sectors);
+ }
}
}
-
/* register EEDP capabilities with SCSI layer */
if (prot_mask > 0)
scsi_host_set_prot(shost, prot_mask);
@@ -10856,6 +10872,8 @@ static const struct pci_device_id mpt3sas_pci_table[] = {
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_MPI_EP,
+ PCI_ANY_ID, PCI_ANY_ID },
/* SSS6200 */
{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200,
PCI_ANY_ID, PCI_ANY_ID },
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index d3940c5d079d..3a143bb5ca72 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -392,7 +392,7 @@ _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc,
"report_manufacture - send to sas_addr(0x%016llx)\n",
ioc->name, (unsigned long long)sas_address));
init_completion(&ioc->transport_cmds.done);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
@@ -1198,7 +1198,7 @@ _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc,
ioc->name, (unsigned long long)phy->identify.sas_address,
phy->number));
init_completion(&ioc->transport_cmds.done);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
@@ -1514,7 +1514,7 @@ _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc,
ioc->name, (unsigned long long)phy->identify.sas_address,
phy->number, phy_operation));
init_completion(&ioc->transport_cmds.done);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
@@ -2014,7 +2014,7 @@ _transport_smp_handler(struct bsg_job *job, struct Scsi_Host *shost,
"%s - sending smp request\n", ioc->name, __func__));
init_completion(&ioc->transport_cmds.done);
- ioc->put_smid_default(ioc, smid);
+ mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
diff --git a/drivers/scsi/mvme147.c b/drivers/scsi/mvme147.c
index e6b2b681fda3..7d1ab414b78f 100644
--- a/drivers/scsi/mvme147.c
+++ b/drivers/scsi/mvme147.c
@@ -3,6 +3,9 @@
#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <asm/page.h>
#include <asm/pgtable.h>
@@ -14,9 +17,6 @@
#include "wd33c93.h"
#include "mvme147.h"
-#include <linux/stat.h>
-
-
static irqreturn_t mvme147_intr(int irq, void *data)
{
struct Scsi_Host *instance = data;
@@ -65,40 +65,57 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
m147_pcc->dma_cntrl = 0;
}
-int mvme147_detect(struct scsi_host_template *tpnt)
+static struct scsi_host_template mvme147_host_template = {
+ .module = THIS_MODULE,
+ .proc_name = "MVME147",
+ .name = "MVME147 built-in SCSI",
+ .queuecommand = wd33c93_queuecommand,
+ .eh_abort_handler = wd33c93_abort,
+ .eh_host_reset_handler = wd33c93_host_reset,
+ .show_info = wd33c93_show_info,
+ .write_info = wd33c93_write_info,
+ .can_queue = CAN_QUEUE,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = CMD_PER_LUN,
+ .use_clustering = ENABLE_CLUSTERING
+};
+
+static struct Scsi_Host *mvme147_shost;
+
+static int __init mvme147_init(void)
{
- static unsigned char called = 0;
- struct Scsi_Host *instance;
wd33c93_regs regs;
struct WD33C93_hostdata *hdata;
+ int error = -ENOMEM;
- if (!MACH_IS_MVME147 || called)
+ if (!MACH_IS_MVME147)
return 0;
- called++;
- tpnt->proc_name = "MVME147";
- tpnt->show_info = wd33c93_show_info,
- tpnt->write_info = wd33c93_write_info,
-
- instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
- if (!instance)
+ mvme147_shost = scsi_host_alloc(&mvme147_host_template,
+ sizeof(struct WD33C93_hostdata));
+ if (!mvme147_shost)
goto err_out;
+ mvme147_shost->base = 0xfffe4000;
+ mvme147_shost->irq = MVME147_IRQ_SCSI_PORT;
- instance->base = 0xfffe4000;
- instance->irq = MVME147_IRQ_SCSI_PORT;
regs.SASR = (volatile unsigned char *)0xfffe4000;
regs.SCMD = (volatile unsigned char *)0xfffe4001;
- hdata = shost_priv(instance);
+
+ hdata = shost_priv(mvme147_shost);
hdata->no_sync = 0xff;
hdata->fast = 0;
hdata->dma_mode = CTRL_DMA;
- wd33c93_init(instance, regs, dma_setup, dma_stop, WD33C93_FS_8_10);
- if (request_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr, 0,
- "MVME147 SCSI PORT", instance))
+ wd33c93_init(mvme147_shost, regs, dma_setup, dma_stop, WD33C93_FS_8_10);
+
+ error = request_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr, 0,
+ "MVME147 SCSI PORT", mvme147_shost);
+ if (error)
goto err_unregister;
- if (request_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr, 0,
- "MVME147 SCSI DMA", instance))
+ error = request_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr, 0,
+ "MVME147 SCSI DMA", mvme147_shost);
+ if (error)
goto err_free_irq;
#if 0 /* Disabled; causes problems booting */
m147_pcc->scsi_interrupt = 0x10; /* Assert SCSI bus reset */
@@ -112,40 +129,30 @@ int mvme147_detect(struct scsi_host_template *tpnt)
m147_pcc->dma_cntrl = 0x00; /* ensure DMA is stopped */
m147_pcc->dma_intr = 0x89; /* Ack and enable ints */
- return 1;
+ error = scsi_add_host(mvme147_shost, NULL);
+ if (error)
+ goto err_free_irq;
+ scsi_scan_host(mvme147_shost);
+ return 0;
err_free_irq:
- free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr);
+ free_irq(MVME147_IRQ_SCSI_PORT, mvme147_shost);
err_unregister:
- scsi_unregister(instance);
+ scsi_host_put(mvme147_shost);
err_out:
- return 0;
+ return error;
}
-static struct scsi_host_template driver_template = {
- .proc_name = "MVME147",
- .name = "MVME147 built-in SCSI",
- .detect = mvme147_detect,
- .release = mvme147_release,
- .queuecommand = wd33c93_queuecommand,
- .eh_abort_handler = wd33c93_abort,
- .eh_host_reset_handler = wd33c93_host_reset,
- .can_queue = CAN_QUEUE,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = CMD_PER_LUN,
- .use_clustering = ENABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
-
-int mvme147_release(struct Scsi_Host *instance)
+static void __exit mvme147_exit(void)
{
-#ifdef MODULE
+ scsi_remove_host(mvme147_shost);
+
/* XXX Make sure DMA is stopped! */
- free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr);
- free_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr);
-#endif
- return 1;
+ free_irq(MVME147_IRQ_SCSI_PORT, mvme147_shost);
+ free_irq(MVME147_IRQ_SCSI_DMA, mvme147_shost);
+
+ scsi_host_put(mvme147_shost);
}
+
+module_init(mvme147_init);
+module_exit(mvme147_exit);
diff --git a/drivers/scsi/mvsas/mv_94xx.c b/drivers/scsi/mvsas/mv_94xx.c
index 7de5d8d75480..eb5471bc7263 100644
--- a/drivers/scsi/mvsas/mv_94xx.c
+++ b/drivers/scsi/mvsas/mv_94xx.c
@@ -1080,16 +1080,16 @@ static int mvs_94xx_gpio_write(struct mvs_prv_info *mvs_prv,
void __iomem *regs = mvi->regs_ex - 0x10200;
int drive = (i/3) & (4-1); /* drive number on host */
- u32 block = mr32(MVS_SGPIO_DCTRL +
+ int driveshift = drive * 8; /* bit offset of drive */
+ u32 block = ioread32be(regs + MVS_SGPIO_DCTRL +
MVS_SGPIO_HOST_OFFSET * mvi->id);
-
/*
* if bit is set then create a mask with the first
* bit of the drive set in the mask ...
*/
- u32 bit = (write_data[i/8] & (1 << (i&(8-1)))) ?
- 1<<(24-drive*8) : 0;
+ u32 bit = get_unaligned_be32(write_data) & (1 << i) ?
+ 1 << driveshift : 0;
/*
* ... and then shift it to the right position based
@@ -1098,26 +1098,27 @@ static int mvs_94xx_gpio_write(struct mvs_prv_info *mvs_prv,
switch (i%3) {
case 0: /* activity */
block &= ~((0x7 << MVS_SGPIO_DCTRL_ACT_SHIFT)
- << (24-drive*8));
+ << driveshift);
/* hardwire activity bit to SOF */
block |= LED_BLINKA_SOF << (
MVS_SGPIO_DCTRL_ACT_SHIFT +
- (24-drive*8));
+ driveshift);
break;
case 1: /* id */
block &= ~((0x3 << MVS_SGPIO_DCTRL_LOC_SHIFT)
- << (24-drive*8));
+ << driveshift);
block |= bit << MVS_SGPIO_DCTRL_LOC_SHIFT;
break;
case 2: /* fail */
block &= ~((0x7 << MVS_SGPIO_DCTRL_ERR_SHIFT)
- << (24-drive*8));
+ << driveshift);
block |= bit << MVS_SGPIO_DCTRL_ERR_SHIFT;
break;
}
- mw32(MVS_SGPIO_DCTRL + MVS_SGPIO_HOST_OFFSET * mvi->id,
- block);
+ iowrite32be(block,
+ regs + MVS_SGPIO_DCTRL +
+ MVS_SGPIO_HOST_OFFSET * mvi->id);
}
@@ -1132,7 +1133,7 @@ static int mvs_94xx_gpio_write(struct mvs_prv_info *mvs_prv,
void __iomem *regs = mvi->regs_ex - 0x10200;
mw32(MVS_SGPIO_DCTRL + MVS_SGPIO_HOST_OFFSET * mvi->id,
- be32_to_cpu(((u32 *) write_data)[i]));
+ ((u32 *) write_data)[i]);
}
return reg_count;
}
diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig
index ecc855c550aa..2d435f105b16 100644
--- a/drivers/scsi/pcmcia/Kconfig
+++ b/drivers/scsi/pcmcia/Kconfig
@@ -19,15 +19,6 @@ config PCMCIA_AHA152X
To compile this driver as a module, choose M here: the
module will be called aha152x_cs.
-config PCMCIA_FDOMAIN
- tristate "Future Domain PCMCIA support"
- help
- Say Y here if you intend to attach this type of PCMCIA SCSI host
- adapter to your computer.
-
- To compile this driver as a module, choose M here: the
- module will be called fdomain_cs.
-
config PCMCIA_NINJA_SCSI
tristate "NinjaSCSI-3 / NinjaSCSI-32Bi (16bit) PCMCIA support"
depends on !64BIT
diff --git a/drivers/scsi/pcmcia/Makefile b/drivers/scsi/pcmcia/Makefile
index 44eea2d43143..faa87a4b2d2b 100644
--- a/drivers/scsi/pcmcia/Makefile
+++ b/drivers/scsi/pcmcia/Makefile
@@ -4,11 +4,9 @@ ccflags-y := -Idrivers/scsi
# 16-bit client drivers
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogic_cs.o
-obj-$(CONFIG_PCMCIA_FDOMAIN) += fdomain_cs.o
obj-$(CONFIG_PCMCIA_AHA152X) += aha152x_cs.o
obj-$(CONFIG_PCMCIA_NINJA_SCSI) += nsp_cs.o
obj-$(CONFIG_PCMCIA_SYM53C500) += sym53c500_cs.o
aha152x_cs-objs := aha152x_stub.o aha152x_core.o
-fdomain_cs-objs := fdomain_stub.o fdomain_core.o
qlogic_cs-objs := qlogic_stub.o
diff --git a/drivers/scsi/pcmcia/fdomain_core.c b/drivers/scsi/pcmcia/fdomain_core.c
deleted file mode 100644
index a48913791868..000000000000
--- a/drivers/scsi/pcmcia/fdomain_core.c
+++ /dev/null
@@ -1,2 +0,0 @@
-#define PCMCIA 1
-#include "fdomain.c"
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
deleted file mode 100644
index 953a792150ae..000000000000
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*======================================================================
-
- A driver for Future Domain-compatible PCMCIA SCSI cards
-
- fdomain_cs.c 1.47 2001/10/13 00:08:52
-
- The contents of this file are subject to the Mozilla Public
- License Version 1.1 (the "License"); you may not use this file
- except in compliance with the License. You may obtain a copy of
- the License at http://www.mozilla.org/MPL/
-
- Software distributed under the License is distributed on an "AS
- IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- implied. See the License for the specific language governing
- rights and limitations under the License.
-
- The initial developer of the original code is David A. Hinds
- <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
-
- Alternatively, the contents of this file may be used under the
- terms of the GNU General Public License version 2 (the "GPL"), in
- which case the provisions of the GPL are applicable instead of the
- above. If you wish to allow the use of your version of this file
- only under the terms of the GPL and not to allow others to use
- your version of this file under the MPL, indicate your decision
- by deleting the provisions above and replace them with the notice
- and other provisions required by the GPL. If you do not delete
- the provisions above, a recipient may use your version of this
- file under either the MPL or the GPL.
-
-======================================================================*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <scsi/scsi.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <scsi/scsi_ioctl.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "fdomain.h"
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ds.h>
-
-/*====================================================================*/
-
-/* Module parameters */
-
-MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
-MODULE_DESCRIPTION("Future Domain PCMCIA SCSI driver");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/*====================================================================*/
-
-typedef struct scsi_info_t {
- struct pcmcia_device *p_dev;
- struct Scsi_Host *host;
-} scsi_info_t;
-
-
-static void fdomain_release(struct pcmcia_device *link);
-static void fdomain_detach(struct pcmcia_device *p_dev);
-static int fdomain_config(struct pcmcia_device *link);
-
-static int fdomain_probe(struct pcmcia_device *link)
-{
- scsi_info_t *info;
-
- dev_dbg(&link->dev, "fdomain_attach()\n");
-
- /* Create new SCSI device */
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
-
- info->p_dev = link;
- link->priv = info;
- link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
- link->config_regs = PRESENT_OPTION;
-
- return fdomain_config(link);
-} /* fdomain_attach */
-
-/*====================================================================*/
-
-static void fdomain_detach(struct pcmcia_device *link)
-{
- dev_dbg(&link->dev, "fdomain_detach\n");
-
- fdomain_release(link);
-
- kfree(link->priv);
-} /* fdomain_detach */
-
-/*====================================================================*/
-
-static int fdomain_config_check(struct pcmcia_device *p_dev, void *priv_data)
-{
- p_dev->io_lines = 10;
- p_dev->resource[0]->end = 0x10;
- p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
- return pcmcia_request_io(p_dev);
-}
-
-
-static int fdomain_config(struct pcmcia_device *link)
-{
- scsi_info_t *info = link->priv;
- int ret;
- char str[22];
- struct Scsi_Host *host;
-
- dev_dbg(&link->dev, "fdomain_config\n");
-
- ret = pcmcia_loop_config(link, fdomain_config_check, NULL);
- if (ret)
- goto failed;
-
- if (!link->irq)
- goto failed;
- ret = pcmcia_enable_device(link);
- if (ret)
- goto failed;
-
- /* A bad hack... */
- release_region(link->resource[0]->start, resource_size(link->resource[0]));
-
- /* Set configuration options for the fdomain driver */
- sprintf(str, "%d,%d", (unsigned int) link->resource[0]->start, link->irq);
- fdomain_setup(str);
-
- host = __fdomain_16x0_detect(&fdomain_driver_template);
- if (!host) {
- printk(KERN_INFO "fdomain_cs: no SCSI devices found\n");
- goto failed;
- }
-
- if (scsi_add_host(host, NULL))
- goto failed;
- scsi_scan_host(host);
-
- info->host = host;
-
- return 0;
-
-failed:
- fdomain_release(link);
- return -ENODEV;
-} /* fdomain_config */
-
-/*====================================================================*/
-
-static void fdomain_release(struct pcmcia_device *link)
-{
- scsi_info_t *info = link->priv;
-
- dev_dbg(&link->dev, "fdomain_release\n");
-
- scsi_remove_host(info->host);
- pcmcia_disable_device(link);
- scsi_unregister(info->host);
-}
-
-/*====================================================================*/
-
-static int fdomain_resume(struct pcmcia_device *link)
-{
- fdomain_16x0_host_reset(NULL);
-
- return 0;
-}
-
-static const struct pcmcia_device_id fdomain_ids[] = {
- PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "SCSI PCMCIA Card", 0xe3736c88, 0x859cad20),
- PCMCIA_DEVICE_PROD_ID1("SCSI PCMCIA Adapter Card", 0x8dacb57e),
- PCMCIA_DEVICE_PROD_ID12(" SIMPLE TECHNOLOGY Corporation", "SCSI PCMCIA Credit Card Controller", 0x182bdafe, 0xc80d106f),
- PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, fdomain_ids);
-
-static struct pcmcia_driver fdomain_cs_driver = {
- .owner = THIS_MODULE,
- .name = "fdomain_cs",
- .probe = fdomain_probe,
- .remove = fdomain_detach,
- .id_table = fdomain_ids,
- .resume = fdomain_resume,
-};
-
-static int __init init_fdomain_cs(void)
-{
- return pcmcia_register_driver(&fdomain_cs_driver);
-}
-
-static void __exit exit_fdomain_cs(void)
-{
- pcmcia_unregister_driver(&fdomain_cs_driver);
-}
-
-module_init(init_fdomain_cs);
-module_exit(exit_fdomain_cs);
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 201c8de1853d..95530393872d 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -1025,7 +1025,7 @@ static void pmcraid_get_fwversion_done(struct pmcraid_cmd *cmd)
static void pmcraid_get_fwversion(struct pmcraid_cmd *cmd)
{
struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
- struct pmcraid_ioadl_desc *ioadl = ioarcb->add_data.u.ioadl;
+ struct pmcraid_ioadl_desc *ioadl;
struct pmcraid_instance *pinstance = cmd->drv_inst;
u16 data_size = sizeof(struct pmcraid_inquiry_data);
@@ -3175,7 +3175,7 @@ static int pmcraid_build_ioadl(
struct scsi_cmnd *scsi_cmd = cmd->scsi_cmd;
struct pmcraid_ioarcb *ioarcb = &(cmd->ioa_cb->ioarcb);
- struct pmcraid_ioadl_desc *ioadl = ioarcb->add_data.u.ioadl;
+ struct pmcraid_ioadl_desc *ioadl;
u32 length = scsi_bufflen(scsi_cmd);
@@ -3225,12 +3225,7 @@ static int pmcraid_build_ioadl(
*/
static void pmcraid_free_sglist(struct pmcraid_sglist *sglist)
{
- int i;
-
- for (i = 0; i < sglist->num_sg; i++)
- __free_pages(sg_page(&(sglist->scatterlist[i])),
- sglist->order);
-
+ sgl_free_order(sglist->scatterlist, sglist->order);
kfree(sglist);
}
@@ -3247,50 +3242,20 @@ static void pmcraid_free_sglist(struct pmcraid_sglist *sglist)
static struct pmcraid_sglist *pmcraid_alloc_sglist(int buflen)
{
struct pmcraid_sglist *sglist;
- struct scatterlist *scatterlist;
- struct page *page;
- int num_elem, i, j;
int sg_size;
int order;
- int bsize_elem;
sg_size = buflen / (PMCRAID_MAX_IOADLS - 1);
order = (sg_size > 0) ? get_order(sg_size) : 0;
- bsize_elem = PAGE_SIZE * (1 << order);
-
- /* Determine the actual number of sg entries needed */
- if (buflen % bsize_elem)
- num_elem = (buflen / bsize_elem) + 1;
- else
- num_elem = buflen / bsize_elem;
/* Allocate a scatter/gather list for the DMA */
- sglist = kzalloc(sizeof(struct pmcraid_sglist) +
- (sizeof(struct scatterlist) * (num_elem - 1)),
- GFP_KERNEL);
-
+ sglist = kzalloc(sizeof(struct pmcraid_sglist), GFP_KERNEL);
if (sglist == NULL)
return NULL;
- scatterlist = sglist->scatterlist;
- sg_init_table(scatterlist, num_elem);
sglist->order = order;
- sglist->num_sg = num_elem;
- sg_size = buflen;
-
- for (i = 0; i < num_elem; i++) {
- page = alloc_pages(GFP_KERNEL|GFP_DMA|__GFP_ZERO, order);
- if (!page) {
- for (j = i - 1; j >= 0; j--)
- __free_pages(sg_page(&scatterlist[j]), order);
- kfree(sglist);
- return NULL;
- }
-
- sg_set_page(&scatterlist[i], page,
- sg_size < bsize_elem ? sg_size : bsize_elem, 0);
- sg_size -= bsize_elem;
- }
+ sgl_alloc_order(buflen, order, false,
+ GFP_KERNEL | GFP_DMA | __GFP_ZERO, &sglist->num_sg);
return sglist;
}
@@ -5492,7 +5457,7 @@ static void pmcraid_set_timestamp(struct pmcraid_cmd *cmd)
struct pmcraid_instance *pinstance = cmd->drv_inst;
struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
__be32 time_stamp_len = cpu_to_be32(PMCRAID_TIMESTAMP_LEN);
- struct pmcraid_ioadl_desc *ioadl = ioarcb->add_data.u.ioadl;
+ struct pmcraid_ioadl_desc *ioadl;
u64 timestamp;
timestamp = ktime_get_real_seconds() * 1000;
@@ -5665,7 +5630,7 @@ static void pmcraid_init_res_table(struct pmcraid_cmd *cmd)
static void pmcraid_querycfg(struct pmcraid_cmd *cmd)
{
struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
- struct pmcraid_ioadl_desc *ioadl = ioarcb->add_data.u.ioadl;
+ struct pmcraid_ioadl_desc *ioadl;
struct pmcraid_instance *pinstance = cmd->drv_inst;
__be32 cfg_table_size = cpu_to_be32(sizeof(struct pmcraid_config_table));
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 8bfac72a242b..754ef30927e2 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -542,8 +542,7 @@ struct pmcraid_sglist {
u32 order;
u32 num_sg;
u32 num_dma_sg;
- u32 buffer_len;
- struct scatterlist scatterlist[1];
+ struct scatterlist *scatterlist;
};
/* page D0 inquiry data of focal point resource */
diff --git a/drivers/scsi/qedf/qedf_dbg.c b/drivers/scsi/qedf/qedf_dbg.c
index e023f5d0dc12..bd1cef25a900 100644
--- a/drivers/scsi/qedf/qedf_dbg.c
+++ b/drivers/scsi/qedf/qedf_dbg.c
@@ -160,7 +160,7 @@ qedf_uevent_emit(struct Scsi_Host *shost, u32 code, char *msg)
switch (code) {
case QEDF_UEVENT_CODE_GRCDUMP:
if (msg)
- strncpy(event_string, msg, strlen(msg));
+ strscpy(event_string, msg, sizeof(event_string));
else
sprintf(event_string, "GRCDUMP=%u", shost->host_no);
break;
diff --git a/drivers/scsi/qedf/qedf_dbg.h b/drivers/scsi/qedf/qedf_dbg.h
index 50083cae84c3..77c27e888969 100644
--- a/drivers/scsi/qedf/qedf_dbg.h
+++ b/drivers/scsi/qedf/qedf_dbg.h
@@ -116,6 +116,14 @@ extern int qedf_create_sysfs_attr(struct Scsi_Host *shost,
extern void qedf_remove_sysfs_attr(struct Scsi_Host *shost,
struct sysfs_bin_attrs *iter);
+struct qedf_debugfs_ops {
+ char *name;
+ struct qedf_list_of_funcs *qedf_funcs;
+};
+
+extern const struct qedf_debugfs_ops qedf_debugfs_ops[];
+extern const struct file_operations qedf_dbg_fops[];
+
#ifdef CONFIG_DEBUG_FS
/* DebugFS related code */
struct qedf_list_of_funcs {
@@ -123,11 +131,6 @@ struct qedf_list_of_funcs {
ssize_t (*oper_func)(struct qedf_dbg_ctx *qedf);
};
-struct qedf_debugfs_ops {
- char *name;
- struct qedf_list_of_funcs *qedf_funcs;
-};
-
#define qedf_dbg_fileops(drv, ops) \
{ \
.owner = THIS_MODULE, \
@@ -147,8 +150,8 @@ struct qedf_debugfs_ops {
}
extern void qedf_dbg_host_init(struct qedf_dbg_ctx *qedf,
- struct qedf_debugfs_ops *dops,
- struct file_operations *fops);
+ const struct qedf_debugfs_ops *dops,
+ const struct file_operations *fops);
extern void qedf_dbg_host_exit(struct qedf_dbg_ctx *qedf);
extern void qedf_dbg_init(char *drv_name);
extern void qedf_dbg_exit(void);
diff --git a/drivers/scsi/qedf/qedf_debugfs.c b/drivers/scsi/qedf/qedf_debugfs.c
index 2b1ef3075e93..c539a7ae3a7e 100644
--- a/drivers/scsi/qedf/qedf_debugfs.c
+++ b/drivers/scsi/qedf/qedf_debugfs.c
@@ -23,8 +23,8 @@ static struct dentry *qedf_dbg_root;
**/
void
qedf_dbg_host_init(struct qedf_dbg_ctx *qedf,
- struct qedf_debugfs_ops *dops,
- struct file_operations *fops)
+ const struct qedf_debugfs_ops *dops,
+ const struct file_operations *fops)
{
char host_dirname[32];
struct dentry *file_dentry = NULL;
@@ -99,7 +99,7 @@ qedf_dbg_exit(void)
qedf_dbg_root = NULL;
}
-struct qedf_debugfs_ops qedf_debugfs_ops[] = {
+const struct qedf_debugfs_ops qedf_debugfs_ops[] = {
{ "fp_int", NULL },
{ "io_trace", NULL },
{ "debug", NULL },
diff --git a/drivers/scsi/qedf/qedf_io.c b/drivers/scsi/qedf/qedf_io.c
index b15e69586a36..50a50c4249d0 100644
--- a/drivers/scsi/qedf/qedf_io.c
+++ b/drivers/scsi/qedf/qedf_io.c
@@ -917,7 +917,7 @@ qedf_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *sc_cmd)
struct qedf_ctx *qedf = lport_priv(lport);
struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
struct fc_rport_libfc_priv *rp = rport->dd_data;
- struct qedf_rport *fcport = rport->dd_data;
+ struct qedf_rport *fcport;
struct qedf_ioreq *io_req;
int rc = 0;
int rval;
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index ccd9a08ea030..284ccb566b19 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -23,6 +23,7 @@
#include <linux/if_vlan.h>
#include <linux/cpu.h>
#include "qedf.h"
+#include "qedf_dbg.h"
#include <uapi/linux/pci_regs.h>
const struct qed_fcoe_ops *qed_ops;
@@ -30,9 +31,6 @@ const struct qed_fcoe_ops *qed_ops;
static int qedf_probe(struct pci_dev *pdev, const struct pci_device_id *id);
static void qedf_remove(struct pci_dev *pdev);
-extern struct qedf_debugfs_ops qedf_debugfs_ops;
-extern struct file_operations qedf_dbg_fops;
-
/*
* Driver module parameters.
*/
@@ -3155,8 +3153,8 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
}
#ifdef CONFIG_DEBUG_FS
- qedf_dbg_host_init(&(qedf->dbg_ctx), &qedf_debugfs_ops,
- &qedf_dbg_fops);
+ qedf_dbg_host_init(&(qedf->dbg_ctx), qedf_debugfs_ops,
+ qedf_dbg_fops);
#endif
/* Start LL2 */
diff --git a/drivers/scsi/qedi/qedi_dbg.h b/drivers/scsi/qedi/qedi_dbg.h
index c55572badfb0..0bc9c31d5a4f 100644
--- a/drivers/scsi/qedi/qedi_dbg.h
+++ b/drivers/scsi/qedi/qedi_dbg.h
@@ -103,7 +103,6 @@ int qedi_create_sysfs_attr(struct Scsi_Host *shost,
void qedi_remove_sysfs_attr(struct Scsi_Host *shost,
struct sysfs_bin_attrs *iter);
-#ifdef CONFIG_DEBUG_FS
/* DebugFS related code */
struct qedi_list_of_funcs {
char *oper_str;
@@ -134,11 +133,10 @@ struct qedi_debugfs_ops {
}
void qedi_dbg_host_init(struct qedi_dbg_ctx *qedi,
- struct qedi_debugfs_ops *dops,
+ const struct qedi_debugfs_ops *dops,
const struct file_operations *fops);
void qedi_dbg_host_exit(struct qedi_dbg_ctx *qedi);
void qedi_dbg_init(char *drv_name);
void qedi_dbg_exit(void);
-#endif /* CONFIG_DEBUG_FS */
#endif /* _QEDI_DBG_H_ */
diff --git a/drivers/scsi/qedi/qedi_debugfs.c b/drivers/scsi/qedi/qedi_debugfs.c
index fd8a1eea3163..fd914ca4149a 100644
--- a/drivers/scsi/qedi/qedi_debugfs.c
+++ b/drivers/scsi/qedi/qedi_debugfs.c
@@ -19,7 +19,7 @@ static struct dentry *qedi_dbg_root;
void
qedi_dbg_host_init(struct qedi_dbg_ctx *qedi,
- struct qedi_debugfs_ops *dops,
+ const struct qedi_debugfs_ops *dops,
const struct file_operations *fops)
{
char host_dirname[32];
@@ -99,7 +99,7 @@ static struct qedi_list_of_funcs qedi_dbg_do_not_recover_ops[] = {
{ NULL, NULL }
};
-struct qedi_debugfs_ops qedi_debugfs_ops[] = {
+const struct qedi_debugfs_ops qedi_debugfs_ops[] = {
{ "gbl_ctx", NULL },
{ "do_not_recover", qedi_dbg_do_not_recover_ops},
{ "io_trace", NULL },
diff --git a/drivers/scsi/qedi/qedi_gbl.h b/drivers/scsi/qedi/qedi_gbl.h
index f5b5a31999aa..a2aa06ed1620 100644
--- a/drivers/scsi/qedi/qedi_gbl.h
+++ b/drivers/scsi/qedi/qedi_gbl.h
@@ -23,8 +23,8 @@ extern uint qedi_io_tracing;
extern struct scsi_host_template qedi_host_template;
extern struct iscsi_transport qedi_iscsi_transport;
extern const struct qed_iscsi_ops *qedi_ops;
-extern struct qedi_debugfs_ops qedi_debugfs_ops;
-extern const struct file_operations qedi_dbg_fops;
+extern const struct qedi_debugfs_ops qedi_debugfs_ops[];
+extern const struct file_operations qedi_dbg_fops[];
extern struct device_attribute *qedi_shost_attrs[];
int qedi_alloc_sq(struct qedi_ctx *qedi, struct qedi_endpoint *ep);
diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c
index f57a94b4f0d9..4da3592aec0f 100644
--- a/drivers/scsi/qedi/qedi_main.c
+++ b/drivers/scsi/qedi/qedi_main.c
@@ -2300,8 +2300,8 @@ static int __qedi_probe(struct pci_dev *pdev, int mode)
}
#ifdef CONFIG_DEBUG_FS
- qedi_dbg_host_init(&qedi->dbg_ctx, &qedi_debugfs_ops,
- &qedi_dbg_fops);
+ qedi_dbg_host_init(&qedi->dbg_ctx, qedi_debugfs_ops,
+ qedi_dbg_fops);
#endif
QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_INFO,
"QLogic FastLinQ iSCSI Module qedi %s, FW %d.%d.%d.%d\n",
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index e2d5d3ca0f57..c11a89be292c 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -1035,7 +1035,7 @@ qla84xx_updatefw(struct bsg_job *bsg_job)
sg_copy_to_buffer(bsg_job->request_payload.sg_list,
bsg_job->request_payload.sg_cnt, fw_buf, data_len);
- mn = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &mn_dma);
+ mn = dma_pool_zalloc(ha->s_dma_pool, GFP_KERNEL, &mn_dma);
if (!mn) {
ql_log(ql_log_warn, vha, 0x7036,
"DMA alloc failed for fw buffer.\n");
@@ -1046,7 +1046,6 @@ qla84xx_updatefw(struct bsg_job *bsg_job)
flag = bsg_request->rqst_data.h_vendor.vendor_cmd[1];
fw_ver = le32_to_cpu(*((uint32_t *)((uint32_t *)fw_buf + 2)));
- memset(mn, 0, sizeof(struct access_chip_84xx));
mn->entry_type = VERIFY_CHIP_IOCB_TYPE;
mn->entry_count = 1;
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 3e9dc54b89a3..5fd44c50bbac 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -14,7 +14,7 @@
* | Module Init and Probe | 0x0193 | 0x0146 |
* | | | 0x015b-0x0160 |
* | | | 0x016e |
- * | Mailbox commands | 0x1205 | 0x11a2-0x11ff |
+ * | Mailbox commands | 0x1206 | 0x11a2-0x11ff |
* | Device Discovery | 0x2134 | 0x210e-0x2116 |
* | | | 0x211a |
* | | | 0x211c-0x2128 |
@@ -60,7 +60,7 @@
* | | | 0xb13c-0xb140 |
* | | | 0xb149 |
* | MultiQ | 0xc010 | |
- * | Misc | 0xd302 | 0xd031-0xd0ff |
+ * | Misc | 0xd303 | 0xd031-0xd0ff |
* | | | 0xd101-0xd1fe |
* | | | 0xd214-0xd2fe |
* | Target Mode | 0xe081 | |
@@ -717,7 +717,7 @@ qla2xxx_dump_post_process(scsi_qla_host_t *vha, int rval)
/**
* qla2300_fw_dump() - Dumps binary data from the 2300 firmware.
- * @ha: HA context
+ * @vha: HA context
* @hardware_locked: Called with the hardware_lock
*/
void
@@ -887,7 +887,7 @@ qla2300_fw_dump_failed:
/**
* qla2100_fw_dump() - Dumps binary data from the 2100/2200 firmware.
- * @ha: HA context
+ * @vha: HA context
* @hardware_locked: Called with the hardware_lock
*/
void
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index c9689f97c307..eb2ec1fb07cb 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2356,6 +2356,8 @@ typedef struct fc_port {
#define NVME_PRLI_SP_DISCOVERY BIT_3
uint8_t nvme_flag;
#define NVME_FLAG_REGISTERED 4
+#define NVME_FLAG_DELETING 2
+#define NVME_FLAG_RESETTING 1
struct fc_port *conflict;
unsigned char logout_completed;
@@ -2981,8 +2983,14 @@ enum scan_flags_t {
SF_QUEUED = BIT_1,
};
+enum fc4type_t {
+ FS_FC4TYPE_FCP = BIT_0,
+ FS_FC4TYPE_NVME = BIT_1,
+};
+
struct fab_scan_rp {
port_id_t id;
+ enum fc4type_t fc4type;
u8 port_name[8];
u8 node_name[8];
};
@@ -3274,6 +3282,7 @@ struct qla_work_evt {
} nack;
struct {
u8 fc4_type;
+ srb_t *sp;
} gpnft;
} u;
};
@@ -3463,7 +3472,6 @@ struct qla_qpair {
struct work_struct q_work;
struct list_head qp_list_elem; /* vha->qp_list */
struct list_head hints_list;
- struct list_head nvme_done_list;
uint16_t cpuid;
struct qla_tgt_counters tgt_counters;
};
@@ -4281,8 +4289,6 @@ typedef struct scsi_qla_host {
struct nvme_fc_local_port *nvme_local_port;
struct completion nvme_del_done;
struct list_head nvme_rport_list;
- atomic_t nvme_active_aen_cnt;
- uint16_t nvme_last_rptd_aen;
uint16_t fcoe_vlan_id;
uint16_t fcoe_fcf_idx;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index e9295398050c..3c4c84ed0f0f 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -658,7 +658,7 @@ void qla24xx_handle_gpsc_event(scsi_qla_host_t *, struct event_arg *);
int qla2x00_mgmt_svr_login(scsi_qla_host_t *);
void qla24xx_handle_gffid_event(scsi_qla_host_t *vha, struct event_arg *ea);
int qla24xx_async_gffid(scsi_qla_host_t *vha, fc_port_t *fcport);
-int qla24xx_async_gpnft(scsi_qla_host_t *, u8);
+int qla24xx_async_gpnft(scsi_qla_host_t *, u8, srb_t *);
void qla24xx_async_gpnft_done(scsi_qla_host_t *, srb_t *);
void qla24xx_async_gnnft_done(scsi_qla_host_t *, srb_t *);
int qla24xx_async_gnnid(scsi_qla_host_t *, fc_port_t *);
@@ -896,6 +896,4 @@ void qlt_update_host_map(struct scsi_qla_host *, port_id_t);
void qlt_remove_target_resources(struct qla_hw_data *);
void qlt_clr_qp_table(struct scsi_qla_host *vha);
-void qla_nvme_cmpl_io(struct srb_iocb *);
-
#endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 403fa096f8c8..2288757b5c9e 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -21,11 +21,10 @@ static int qla_async_rsnn_nn(scsi_qla_host_t *);
/**
* qla2x00_prep_ms_iocb() - Prepare common MS/CT IOCB fields for SNS CT query.
- * @ha: HA context
- * @req_size: request size in bytes
- * @rsp_size: response size in bytes
+ * @vha: HA context
+ * @arg: CT arguments
*
- * Returns a pointer to the @ha's ms_iocb.
+ * Returns a pointer to the @vha's ms_iocb.
*/
void *
qla2x00_prep_ms_iocb(scsi_qla_host_t *vha, struct ct_arg *arg)
@@ -61,9 +60,8 @@ qla2x00_prep_ms_iocb(scsi_qla_host_t *vha, struct ct_arg *arg)
/**
* qla24xx_prep_ms_iocb() - Prepare common CT IOCB fields for SNS CT query.
- * @ha: HA context
- * @req_size: request size in bytes
- * @rsp_size: response size in bytes
+ * @vha: HA context
+ * @arg: CT arguments
*
* Returns a pointer to the @ha's ms_iocb.
*/
@@ -101,7 +99,7 @@ qla24xx_prep_ms_iocb(scsi_qla_host_t *vha, struct ct_arg *arg)
/**
* qla2x00_prep_ct_req() - Prepare common CT request fields for SNS query.
- * @ct_req: CT request buffer
+ * @p: CT request buffer
* @cmd: GS command
* @rsp_size: response size in bytes
*
@@ -196,7 +194,7 @@ qla2x00_chk_ms_status(scsi_qla_host_t *vha, ms_iocb_entry_t *ms_pkt,
/**
* qla2x00_ga_nxt() - SNS scan for fabric devices via GA_NXT command.
- * @ha: HA context
+ * @vha: HA context
* @fcport: fcport entry to updated
*
* Returns 0 on success.
@@ -283,7 +281,7 @@ qla2x00_gid_pt_rsp_size(scsi_qla_host_t *vha)
/**
* qla2x00_gid_pt() - SNS scan for fabric devices via GID_PT command.
- * @ha: HA context
+ * @vha: HA context
* @list: switch info entries to populate
*
* NOTE: Non-Nx_Ports are not requested.
@@ -371,7 +369,7 @@ qla2x00_gid_pt(scsi_qla_host_t *vha, sw_info_t *list)
/**
* qla2x00_gpn_id() - SNS Get Port Name (GPN_ID) query.
- * @ha: HA context
+ * @vha: HA context
* @list: switch info entries to populate
*
* Returns 0 on success.
@@ -441,7 +439,7 @@ qla2x00_gpn_id(scsi_qla_host_t *vha, sw_info_t *list)
/**
* qla2x00_gnn_id() - SNS Get Node Name (GNN_ID) query.
- * @ha: HA context
+ * @vha: HA context
* @list: switch info entries to populate
*
* Returns 0 on success.
@@ -583,7 +581,7 @@ err2:
/**
* qla2x00_rft_id() - SNS Register FC-4 TYPEs (RFT_ID) supported by the HBA.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -675,7 +673,8 @@ done:
/**
* qla2x00_rff_id() - SNS Register FC-4 Features (RFF_ID) supported by the HBA.
- * @ha: HA context
+ * @vha: HA context
+ * @type: not used
*
* Returns 0 on success.
*/
@@ -769,7 +768,7 @@ done:
/**
* qla2x00_rnn_id() - SNS Register Node Name (RNN_ID) of the HBA.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -874,7 +873,7 @@ qla2x00_get_sym_node_name(scsi_qla_host_t *vha, uint8_t *snn, size_t size)
/**
* qla2x00_rsnn_nn() - SNS Register Symbolic Node Name (RSNN_NN) of the HBA.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -970,7 +969,7 @@ done:
/**
* qla2x00_prep_sns_cmd() - Prepare common SNS command request fields for query.
- * @ha: HA context
+ * @vha: HA context
* @cmd: GS command
* @scmd_len: Subcommand length
* @data_size: response size in bytes
@@ -1003,7 +1002,7 @@ qla2x00_prep_sns_cmd(scsi_qla_host_t *vha, uint16_t cmd, uint16_t scmd_len,
/**
* qla2x00_sns_ga_nxt() - SNS scan for fabric devices via GA_NXT command.
- * @ha: HA context
+ * @vha: HA context
* @fcport: fcport entry to updated
*
* This command uses the old Exectute SNS Command mailbox routine.
@@ -1067,7 +1066,7 @@ qla2x00_sns_ga_nxt(scsi_qla_host_t *vha, fc_port_t *fcport)
/**
* qla2x00_sns_gid_pt() - SNS scan for fabric devices via GID_PT command.
- * @ha: HA context
+ * @vha: HA context
* @list: switch info entries to populate
*
* This command uses the old Exectute SNS Command mailbox routine.
@@ -1140,7 +1139,7 @@ qla2x00_sns_gid_pt(scsi_qla_host_t *vha, sw_info_t *list)
/**
* qla2x00_sns_gpn_id() - SNS Get Port Name (GPN_ID) query.
- * @ha: HA context
+ * @vha: HA context
* @list: switch info entries to populate
*
* This command uses the old Exectute SNS Command mailbox routine.
@@ -1196,7 +1195,7 @@ qla2x00_sns_gpn_id(scsi_qla_host_t *vha, sw_info_t *list)
/**
* qla2x00_sns_gnn_id() - SNS Get Node Name (GNN_ID) query.
- * @ha: HA context
+ * @vha: HA context
* @list: switch info entries to populate
*
* This command uses the old Exectute SNS Command mailbox routine.
@@ -1259,7 +1258,7 @@ qla2x00_sns_gnn_id(scsi_qla_host_t *vha, sw_info_t *list)
/**
* qla2x00_snd_rft_id() - SNS Register FC-4 TYPEs (RFT_ID) supported by the HBA.
- * @ha: HA context
+ * @vha: HA context
*
* This command uses the old Exectute SNS Command mailbox routine.
*
@@ -1308,8 +1307,7 @@ qla2x00_sns_rft_id(scsi_qla_host_t *vha)
/**
* qla2x00_sns_rnn_id() - SNS Register Node Name (RNN_ID) of the HBA.
- * HBA.
- * @ha: HA context
+ * @vha: HA context
*
* This command uses the old Exectute SNS Command mailbox routine.
*
@@ -1365,7 +1363,7 @@ qla2x00_sns_rnn_id(scsi_qla_host_t *vha)
/**
* qla2x00_mgmt_svr_login() - Login to fabric Management Service.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -1401,7 +1399,7 @@ qla2x00_mgmt_svr_login(scsi_qla_host_t *vha)
/**
* qla2x00_prep_ms_fdmi_iocb() - Prepare common MS IOCB fields for FDMI query.
- * @ha: HA context
+ * @vha: HA context
* @req_size: request size in bytes
* @rsp_size: response size in bytes
*
@@ -1439,7 +1437,7 @@ qla2x00_prep_ms_fdmi_iocb(scsi_qla_host_t *vha, uint32_t req_size,
/**
* qla24xx_prep_ms_fdmi_iocb() - Prepare common MS IOCB fields for FDMI query.
- * @ha: HA context
+ * @vha: HA context
* @req_size: request size in bytes
* @rsp_size: response size in bytes
*
@@ -1496,7 +1494,7 @@ qla2x00_update_ms_fdmi_iocb(scsi_qla_host_t *vha, uint32_t req_size)
/**
* qla2x00_prep_ct_req() - Prepare common CT request fields for SNS query.
- * @ct_req: CT request buffer
+ * @p: CT request buffer
* @cmd: GS command
* @rsp_size: response size in bytes
*
@@ -1518,8 +1516,8 @@ qla2x00_prep_ct_fdmi_req(struct ct_sns_pkt *p, uint16_t cmd,
}
/**
- * qla2x00_fdmi_rhba() -
- * @ha: HA context
+ * qla2x00_fdmi_rhba() - perform RHBA FDMI registration
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -1728,8 +1726,8 @@ qla2x00_fdmi_rhba(scsi_qla_host_t *vha)
}
/**
- * qla2x00_fdmi_rpa() -
- * @ha: HA context
+ * qla2x00_fdmi_rpa() - perform RPA registration
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -1940,8 +1938,8 @@ qla2x00_fdmi_rpa(scsi_qla_host_t *vha)
}
/**
- * qla2x00_fdmiv2_rhba() -
- * @ha: HA context
+ * qla2x00_fdmiv2_rhba() - perform RHBA FDMI v2 registration
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2257,7 +2255,7 @@ qla2x00_fdmiv2_rhba(scsi_qla_host_t *vha)
/**
* qla2x00_fdmi_dhba() -
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2305,7 +2303,7 @@ qla2x00_fdmi_dhba(scsi_qla_host_t *vha)
/**
* qla2x00_fdmiv2_rpa() -
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2635,7 +2633,7 @@ qla2x00_fdmiv2_rpa(scsi_qla_host_t *vha)
/**
* qla2x00_fdmi_register() -
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2693,7 +2691,7 @@ out:
/**
* qla2x00_gfpn_id() - SNS Get Fabric Port Name (GFPN_ID) query.
- * @ha: HA context
+ * @vha: HA context
* @list: switch info entries to populate
*
* Returns 0 on success.
@@ -2778,7 +2776,7 @@ qla24xx_prep_ct_fm_req(struct ct_sns_pkt *p, uint16_t cmd,
/**
* qla2x00_gpsc() - FCS Get Port Speed Capabilities (GPSC) query.
- * @ha: HA context
+ * @vha: HA context
* @list: switch info entries to populate
*
* Returns 0 on success.
@@ -2892,7 +2890,7 @@ qla2x00_gpsc(scsi_qla_host_t *vha, sw_info_t *list)
/**
* qla2x00_gff_id() - SNS Get FC-4 Features (GFF_ID) query.
*
- * @ha: HA context
+ * @vha: HA context
* @list: switch info entries to populate
*
*/
@@ -3862,7 +3860,6 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp)
fc_port_t *fcport;
u32 i, rc;
bool found;
- u8 fc4type = sp->gen2;
struct fab_scan_rp *rp;
unsigned long flags;
@@ -3935,7 +3932,7 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp)
"%s %d %8phC post new sess\n",
__func__, __LINE__, rp->port_name);
qla24xx_post_newsess_work(vha, &rp->id, rp->port_name,
- rp->node_name, NULL, fc4type);
+ rp->node_name, NULL, rp->fc4type);
}
}
@@ -3973,24 +3970,114 @@ out:
spin_lock_irqsave(&vha->work_lock, flags);
vha->scan.scan_flags &= ~SF_SCANNING;
spin_unlock_irqrestore(&vha->work_lock, flags);
-
- if ((fc4type == FC4_TYPE_FCP_SCSI) && vha->flags.nvme_enabled)
- qla24xx_async_gpnft(vha, FC4_TYPE_NVME);
}
-static void qla2x00_async_gpnft_gnnft_sp_done(void *s, int res)
+static void qla2x00_find_free_fcp_nvme_slot(struct scsi_qla_host *vha,
+ struct srb *sp)
{
- struct srb *sp = s;
- struct scsi_qla_host *vha = sp->vha;
- struct qla_work_evt *e;
+ struct qla_hw_data *ha = vha->hw;
+ int num_fibre_dev = ha->max_fibre_devices;
struct ct_sns_req *ct_req =
(struct ct_sns_req *)sp->u.iocb_cmd.u.ctarg.req;
struct ct_sns_gpnft_rsp *ct_rsp =
(struct ct_sns_gpnft_rsp *)sp->u.iocb_cmd.u.ctarg.rsp;
struct ct_sns_gpn_ft_data *d;
struct fab_scan_rp *rp;
+ u16 cmd = be16_to_cpu(ct_req->command);
+ u8 fc4_type = sp->gen2;
int i, j, k;
+ port_id_t id;
+ u8 found;
+ u64 wwn;
+
+ j = 0;
+ for (i = 0; i < num_fibre_dev; i++) {
+ d = &ct_rsp->entries[i];
+
+ id.b.rsvd_1 = 0;
+ id.b.domain = d->port_id[0];
+ id.b.area = d->port_id[1];
+ id.b.al_pa = d->port_id[2];
+ wwn = wwn_to_u64(d->port_name);
+
+ if (id.b24 == 0 || wwn == 0)
+ continue;
+
+ if (fc4_type == FC4_TYPE_FCP_SCSI) {
+ if (cmd == GPN_FT_CMD) {
+ rp = &vha->scan.l[j];
+ rp->id = id;
+ memcpy(rp->port_name, d->port_name, 8);
+ j++;
+ rp->fc4type = FS_FC4TYPE_FCP;
+ } else {
+ for (k = 0; k < num_fibre_dev; k++) {
+ rp = &vha->scan.l[k];
+ if (id.b24 == rp->id.b24) {
+ memcpy(rp->node_name,
+ d->port_name, 8);
+ break;
+ }
+ }
+ }
+ } else {
+ /* Search if the fibre device supports FC4_TYPE_NVME */
+ if (cmd == GPN_FT_CMD) {
+ found = 0;
+
+ for (k = 0; k < num_fibre_dev; k++) {
+ rp = &vha->scan.l[k];
+ if (!memcmp(rp->port_name,
+ d->port_name, 8)) {
+ /*
+ * Supports FC-NVMe & FCP
+ */
+ rp->fc4type |= FS_FC4TYPE_NVME;
+ found = 1;
+ break;
+ }
+ }
+
+ /* We found new FC-NVMe only port */
+ if (!found) {
+ for (k = 0; k < num_fibre_dev; k++) {
+ rp = &vha->scan.l[k];
+ if (wwn_to_u64(rp->port_name)) {
+ continue;
+ } else {
+ rp->id = id;
+ memcpy(rp->port_name,
+ d->port_name, 8);
+ rp->fc4type =
+ FS_FC4TYPE_NVME;
+ break;
+ }
+ }
+ }
+ } else {
+ for (k = 0; k < num_fibre_dev; k++) {
+ rp = &vha->scan.l[k];
+ if (id.b24 == rp->id.b24) {
+ memcpy(rp->node_name,
+ d->port_name, 8);
+ break;
+ }
+ }
+ }
+ }
+ }
+}
+
+static void qla2x00_async_gpnft_gnnft_sp_done(void *s, int res)
+{
+ struct srb *sp = s;
+ struct scsi_qla_host *vha = sp->vha;
+ struct qla_work_evt *e;
+ struct ct_sns_req *ct_req =
+ (struct ct_sns_req *)sp->u.iocb_cmd.u.ctarg.req;
u16 cmd = be16_to_cpu(ct_req->command);
+ u8 fc4_type = sp->gen2;
+ unsigned long flags;
/* gen2 field is holding the fc4type */
ql_dbg(ql_dbg_disc, vha, 0xffff,
@@ -4018,40 +4105,51 @@ static void qla2x00_async_gpnft_gnnft_sp_done(void *s, int res)
return;
}
- if (!res) {
- port_id_t id;
- u64 wwn;
-
- j = 0;
- for (i = 0; i < vha->hw->max_fibre_devices; i++) {
- d = &ct_rsp->entries[i];
+ if (!res)
+ qla2x00_find_free_fcp_nvme_slot(vha, sp);
- id.b.rsvd_1 = 0;
- id.b.domain = d->port_id[0];
- id.b.area = d->port_id[1];
- id.b.al_pa = d->port_id[2];
- wwn = wwn_to_u64(d->port_name);
-
- if (id.b24 == 0 || wwn == 0)
- continue;
+ if ((fc4_type == FC4_TYPE_FCP_SCSI) && vha->flags.nvme_enabled &&
+ cmd == GNN_FT_CMD) {
+ del_timer(&sp->u.iocb_cmd.timer);
+ spin_lock_irqsave(&vha->work_lock, flags);
+ vha->scan.scan_flags &= ~SF_SCANNING;
+ spin_unlock_irqrestore(&vha->work_lock, flags);
- if (cmd == GPN_FT_CMD) {
- rp = &vha->scan.l[j];
- rp->id = id;
- memcpy(rp->port_name, d->port_name, 8);
- j++;
- } else {/* GNN_FT_CMD */
- for (k = 0; k < vha->hw->max_fibre_devices;
- k++) {
- rp = &vha->scan.l[k];
- if (id.b24 == rp->id.b24) {
- memcpy(rp->node_name,
- d->port_name, 8);
- break;
- }
- }
+ e = qla2x00_alloc_work(vha, QLA_EVT_GPNFT);
+ if (!e) {
+ /*
+ * please ignore kernel warning. Otherwise,
+ * we have mem leak.
+ */
+ if (sp->u.iocb_cmd.u.ctarg.req) {
+ dma_free_coherent(&vha->hw->pdev->dev,
+ sizeof(struct ct_sns_pkt),
+ sp->u.iocb_cmd.u.ctarg.req,
+ sp->u.iocb_cmd.u.ctarg.req_dma);
+ sp->u.iocb_cmd.u.ctarg.req = NULL;
}
+ if (sp->u.iocb_cmd.u.ctarg.rsp) {
+ dma_free_coherent(&vha->hw->pdev->dev,
+ sizeof(struct ct_sns_pkt),
+ sp->u.iocb_cmd.u.ctarg.rsp,
+ sp->u.iocb_cmd.u.ctarg.rsp_dma);
+ sp->u.iocb_cmd.u.ctarg.rsp = NULL;
+ }
+
+ ql_dbg(ql_dbg_disc, vha, 0xffff,
+ "Async done-%s unable to alloc work element\n",
+ sp->name);
+ sp->free(sp);
+ set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
+ set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
+ return;
}
+ e->u.gpnft.fc4_type = FC4_TYPE_NVME;
+ sp->rc = res;
+ e->u.gpnft.sp = sp;
+
+ qla2x00_post_work(vha, e);
+ return;
}
if (cmd == GPN_FT_CMD)
@@ -4102,9 +4200,12 @@ static int qla24xx_async_gnnft(scsi_qla_host_t *vha, struct srb *sp,
int rval = QLA_FUNCTION_FAILED;
struct ct_sns_req *ct_req;
struct ct_sns_pkt *ct_sns;
+ unsigned long flags;
if (!vha->flags.online) {
+ spin_lock_irqsave(&vha->work_lock, flags);
vha->scan.scan_flags &= ~SF_SCANNING;
+ spin_unlock_irqrestore(&vha->work_lock, flags);
goto done_free_sp;
}
@@ -4113,10 +4214,18 @@ static int qla24xx_async_gnnft(scsi_qla_host_t *vha, struct srb *sp,
"%s: req %p rsp %p are not setup\n",
__func__, sp->u.iocb_cmd.u.ctarg.req,
sp->u.iocb_cmd.u.ctarg.rsp);
+ spin_lock_irqsave(&vha->work_lock, flags);
vha->scan.scan_flags &= ~SF_SCANNING;
+ spin_unlock_irqrestore(&vha->work_lock, flags);
WARN_ON(1);
goto done_free_sp;
}
+
+ ql_dbg(ql_dbg_disc, vha, 0xfffff,
+ "%s: FC4Type %x, CT-PASSTRHU %s command ctarg rsp size %d, ctarg req size %d\n",
+ __func__, fc4_type, sp->name, sp->u.iocb_cmd.u.ctarg.rsp_size,
+ sp->u.iocb_cmd.u.ctarg.req_size);
+
sp->type = SRB_CT_PTHRU_CMD;
sp->name = "gnnft";
sp->gen1 = vha->hw->base_qpair->chip_reset;
@@ -4179,15 +4288,17 @@ void qla24xx_async_gpnft_done(scsi_qla_host_t *vha, srb_t *sp)
}
/* Get WWPN list for certain fc4_type */
-int qla24xx_async_gpnft(scsi_qla_host_t *vha, u8 fc4_type)
+int qla24xx_async_gpnft(scsi_qla_host_t *vha, u8 fc4_type, srb_t *sp)
{
int rval = QLA_FUNCTION_FAILED;
struct ct_sns_req *ct_req;
- srb_t *sp;
struct ct_sns_pkt *ct_sns;
u32 rspsz;
unsigned long flags;
+ ql_dbg(ql_dbg_disc, vha, 0xffff,
+ "%s enter\n", __func__);
+
if (!vha->flags.online)
return rval;
@@ -4200,9 +4311,58 @@ int qla24xx_async_gpnft(scsi_qla_host_t *vha, u8 fc4_type)
vha->scan.scan_flags |= SF_SCANNING;
spin_unlock_irqrestore(&vha->work_lock, flags);
- sp = qla2x00_get_sp(vha, NULL, GFP_KERNEL);
- if (!sp) {
- vha->scan.scan_flags &= ~SF_SCANNING;
+ if (fc4_type == FC4_TYPE_FCP_SCSI) {
+ ql_dbg(ql_dbg_disc, vha, 0xffff,
+ "%s: Performing FCP Scan\n", __func__);
+
+ if (sp)
+ sp->free(sp); /* should not happen */
+
+ sp = qla2x00_get_sp(vha, NULL, GFP_KERNEL);
+ if (!sp) {
+ spin_lock_irqsave(&vha->work_lock, flags);
+ vha->scan.scan_flags &= ~SF_SCANNING;
+ spin_unlock_irqrestore(&vha->work_lock, flags);
+ return rval;
+ }
+
+ sp->u.iocb_cmd.u.ctarg.req = dma_zalloc_coherent(
+ &vha->hw->pdev->dev, sizeof(struct ct_sns_pkt),
+ &sp->u.iocb_cmd.u.ctarg.req_dma, GFP_KERNEL);
+ if (!sp->u.iocb_cmd.u.ctarg.req) {
+ ql_log(ql_log_warn, vha, 0xffff,
+ "Failed to allocate ct_sns request.\n");
+ spin_lock_irqsave(&vha->work_lock, flags);
+ vha->scan.scan_flags &= ~SF_SCANNING;
+ spin_unlock_irqrestore(&vha->work_lock, flags);
+ goto done_free_sp;
+ }
+ sp->u.iocb_cmd.u.ctarg.req_size = GPN_FT_REQ_SIZE;
+
+ rspsz = sizeof(struct ct_sns_gpnft_rsp) +
+ ((vha->hw->max_fibre_devices - 1) *
+ sizeof(struct ct_sns_gpn_ft_data));
+
+ sp->u.iocb_cmd.u.ctarg.rsp = dma_zalloc_coherent(
+ &vha->hw->pdev->dev, rspsz,
+ &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL);
+ if (!sp->u.iocb_cmd.u.ctarg.rsp) {
+ ql_log(ql_log_warn, vha, 0xffff,
+ "Failed to allocate ct_sns request.\n");
+ spin_lock_irqsave(&vha->work_lock, flags);
+ vha->scan.scan_flags &= ~SF_SCANNING;
+ spin_unlock_irqrestore(&vha->work_lock, flags);
+ goto done_free_sp;
+ }
+ sp->u.iocb_cmd.u.ctarg.rsp_size = rspsz;
+
+ ql_dbg(ql_dbg_disc, vha, 0xffff,
+ "%s scan list size %d\n", __func__, vha->scan.size);
+
+ memset(vha->scan.l, 0, vha->scan.size);
+ } else if (!sp) {
+ ql_dbg(ql_dbg_disc, vha, 0xffff,
+ "NVME scan did not provide SP\n");
return rval;
}
@@ -4212,31 +4372,10 @@ int qla24xx_async_gpnft(scsi_qla_host_t *vha, u8 fc4_type)
sp->gen2 = fc4_type;
qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
- sp->u.iocb_cmd.u.ctarg.req = dma_zalloc_coherent(&vha->hw->pdev->dev,
- sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma,
- GFP_KERNEL);
- if (!sp->u.iocb_cmd.u.ctarg.req) {
- ql_log(ql_log_warn, vha, 0xffff,
- "Failed to allocate ct_sns request.\n");
- vha->scan.scan_flags &= ~SF_SCANNING;
- goto done_free_sp;
- }
-
rspsz = sizeof(struct ct_sns_gpnft_rsp) +
((vha->hw->max_fibre_devices - 1) *
sizeof(struct ct_sns_gpn_ft_data));
- sp->u.iocb_cmd.u.ctarg.rsp = dma_zalloc_coherent(&vha->hw->pdev->dev,
- rspsz, &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL);
- if (!sp->u.iocb_cmd.u.ctarg.rsp) {
- ql_log(ql_log_warn, vha, 0xffff,
- "Failed to allocate ct_sns request.\n");
- vha->scan.scan_flags &= ~SF_SCANNING;
- goto done_free_sp;
- }
-
- memset(vha->scan.l, 0, vha->scan.size);
-
ct_sns = (struct ct_sns_pkt *)sp->u.iocb_cmd.u.ctarg.req;
/* CT_IU preamble */
ct_req = qla2x00_prep_ct_req(ct_sns, GPN_FT_CMD, rspsz);
@@ -4244,8 +4383,6 @@ int qla24xx_async_gpnft(scsi_qla_host_t *vha, u8 fc4_type)
/* GPN_FT req */
ct_req->req.gpn_ft.port_type = fc4_type;
- sp->u.iocb_cmd.u.ctarg.req_size = GPN_FT_REQ_SIZE;
- sp->u.iocb_cmd.u.ctarg.rsp_size = rspsz;
sp->u.iocb_cmd.u.ctarg.nport_handle = NPH_SNS;
sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
@@ -4253,7 +4390,9 @@ int qla24xx_async_gpnft(scsi_qla_host_t *vha, u8 fc4_type)
rval = qla2x00_start_sp(sp);
if (rval != QLA_SUCCESS) {
+ spin_lock_irqsave(&vha->work_lock, flags);
vha->scan.scan_flags &= ~SF_SCANNING;
+ spin_unlock_irqrestore(&vha->work_lock, flags);
goto done_free_sp;
}
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 8d7fab3cd01d..8aeb0ed524a1 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -875,7 +875,6 @@ qla24xx_async_prli(struct scsi_qla_host *vha, fc_port_t *fcport)
return rval;
if (fcport->fw_login_state == DSC_LS_PLOGI_PEND ||
- fcport->fw_login_state == DSC_LS_PLOGI_COMP ||
fcport->fw_login_state == DSC_LS_PRLI_PEND)
return rval;
@@ -1240,6 +1239,11 @@ int qla24xx_fcport_handle_login(struct scsi_qla_host *vha, fc_port_t *fcport)
qla2x00_post_async_adisc_work(vha, fcport, data);
break;
+ case DSC_LOGIN_PEND:
+ if (fcport->fw_login_state == DSC_LS_PLOGI_COMP)
+ qla24xx_post_prli_work(vha, fcport);
+ break;
+
default:
break;
}
@@ -1643,6 +1647,13 @@ qla24xx_handle_prli_done_event(struct scsi_qla_host *vha, struct event_arg *ea)
qla24xx_post_gpdb_work(vha, ea->fcport, 0);
break;
default:
+ if ((ea->iop[0] == LSC_SCODE_ELS_REJECT) &&
+ (ea->iop[1] == 0x50000)) { /* reson 5=busy expl:0x0 */
+ set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
+ ea->fcport->fw_login_state = DSC_LS_PLOGI_COMP;
+ break;
+ }
+
if (ea->fcport->n2n_flag) {
ql_dbg(ql_dbg_disc, vha, 0x2118,
"%s %d %8phC post fc4 prli\n",
@@ -2049,7 +2060,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
/**
* qla2100_pci_config() - Setup ISP21xx PCI configuration registers.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2080,7 +2091,7 @@ qla2100_pci_config(scsi_qla_host_t *vha)
/**
* qla2300_pci_config() - Setup ISP23xx PCI configuration registers.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2162,7 +2173,7 @@ qla2300_pci_config(scsi_qla_host_t *vha)
/**
* qla24xx_pci_config() - Setup ISP24xx PCI configuration registers.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2206,7 +2217,7 @@ qla24xx_pci_config(scsi_qla_host_t *vha)
/**
* qla25xx_pci_config() - Setup ISP25xx PCI configuration registers.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2237,7 +2248,7 @@ qla25xx_pci_config(scsi_qla_host_t *vha)
/**
* qla2x00_isp_firmware() - Choose firmware image.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2273,7 +2284,7 @@ qla2x00_isp_firmware(scsi_qla_host_t *vha)
/**
* qla2x00_reset_chip() - Reset ISP chip.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2417,6 +2428,7 @@ qla2x00_reset_chip(scsi_qla_host_t *vha)
/**
* qla81xx_reset_mpi() - Reset's MPI FW via Write MPI Register MBC.
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2433,7 +2445,7 @@ qla81xx_reset_mpi(scsi_qla_host_t *vha)
/**
* qla24xx_reset_risc() - Perform full reset of ISP24xx RISC.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2648,7 +2660,7 @@ acquired:
/**
* qla24xx_reset_chip() - Reset ISP24xx chip.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2672,7 +2684,7 @@ qla24xx_reset_chip(scsi_qla_host_t *vha)
/**
* qla2x00_chip_diag() - Test chip for proper operation.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2691,8 +2703,8 @@ qla2x00_chip_diag(scsi_qla_host_t *vha)
/* Assume a failed state */
rval = QLA_FUNCTION_FAILED;
- ql_dbg(ql_dbg_init, vha, 0x007b,
- "Testing device at %lx.\n", (u_long)&reg->flash_address);
+ ql_dbg(ql_dbg_init, vha, 0x007b, "Testing device at %p.\n",
+ &reg->flash_address);
spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -2796,7 +2808,7 @@ chip_diag_failed:
/**
* qla24xx_chip_diag() - Test ISP24xx for proper operation.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -3264,7 +3276,7 @@ out:
/**
* qla2x00_setup_chip() - Load and start RISC firmware.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -3419,7 +3431,7 @@ failed:
/**
* qla2x00_init_response_q_entries() - Initializes response queue entries.
- * @ha: HA context
+ * @rsp: response queue
*
* Beginning of request ring has initialization control block already built
* by nvram config routine.
@@ -3444,7 +3456,7 @@ qla2x00_init_response_q_entries(struct rsp_que *rsp)
/**
* qla2x00_update_fw_options() - Read and process firmware options.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -3707,7 +3719,7 @@ qla24xx_config_rings(struct scsi_qla_host *vha)
/**
* qla2x00_init_rings() - Initializes firmware.
- * @ha: HA context
+ * @vha: HA context
*
* Beginning of request ring has initialization control block already built
* by nvram config routine.
@@ -3815,7 +3827,7 @@ next_check:
/**
* qla2x00_fw_ready() - Waits for firmware ready.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -4483,7 +4495,7 @@ qla2x00_rport_del(void *data)
/**
* qla2x00_alloc_fcport() - Allocate a generic fcport.
- * @ha: HA context
+ * @vha: HA context
* @flags: allocation flags
*
* Returns a pointer to the allocated fcport, or NULL, if none available.
@@ -5027,9 +5039,9 @@ qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
fcport->port_name, rval, fcport->fp_speed, mb[0], mb[1]);
} else {
ql_dbg(ql_dbg_disc, vha, 0x2005,
- "iIDMA adjusted to %s GB/s on %8phN.\n",
+ "iIDMA adjusted to %s GB/s (%X) on %8phN.\n",
qla2x00_get_link_speed_str(ha, fcport->fp_speed),
- fcport->port_name);
+ fcport->fp_speed, fcport->port_name);
}
}
@@ -5109,13 +5121,14 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
fcport->deleted = 0;
fcport->logout_on_delete = 1;
+ qla2x00_set_fcport_state(fcport, FCS_ONLINE);
+ qla2x00_iidma_fcport(vha, fcport);
+
if (fcport->fc4f_nvme) {
qla_nvme_register_remote(vha, fcport);
return;
}
- qla2x00_set_fcport_state(fcport, FCS_ONLINE);
- qla2x00_iidma_fcport(vha, fcport);
qla24xx_update_fcport_fcp_prio(vha, fcport);
reg_port:
@@ -5254,8 +5267,8 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
qlt_do_generation_tick(vha, &discovery_gen);
if (USE_ASYNC_SCAN(ha)) {
- rval = QLA_SUCCESS;
- rval = qla24xx_async_gpnft(vha, FC4_TYPE_FCP_SCSI);
+ rval = qla24xx_async_gpnft(vha, FC4_TYPE_FCP_SCSI,
+ NULL);
if (rval)
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
} else {
@@ -5518,6 +5531,14 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha)
break;
}
+ if (fcport->fc4f_nvme) {
+ if (fcport->disc_state == DSC_DELETE_PEND) {
+ fcport->disc_state = DSC_GNL;
+ vha->fcport_count--;
+ fcport->login_succ = 0;
+ }
+ }
+
if (found) {
spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
continue;
@@ -8398,7 +8419,6 @@ struct qla_qpair *qla2xxx_create_qpair(struct scsi_qla_host *vha, int qos,
qpair->vp_idx = vp_idx;
qpair->fw_started = ha->flags.fw_started;
INIT_LIST_HEAD(&qpair->hints_list);
- INIT_LIST_HEAD(&qpair->nvme_done_list);
qpair->chip_reset = ha->base_qpair->chip_reset;
qpair->enable_class_2 = ha->base_qpair->enable_class_2;
qpair->enable_explicit_conf =
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index 4d32426393c7..b7a05aebf065 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -10,6 +10,7 @@
* qla24xx_calc_iocbs() - Determine number of Command Type 3 and
* Continuation Type 1 IOCBs to allocate.
*
+ * @vha: HA context
* @dsds: number of data segment decriptors needed
*
* Returns the number of IOCB entries needed to store @dsds.
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 8d00d559bd26..f74ff7b550b6 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -14,7 +14,7 @@
/**
* qla2x00_get_cmd_direction() - Determine control_flag data direction.
- * @cmd: SCSI command
+ * @sp: SCSI command
*
* Returns the proper CF_* direction based on CDB.
*/
@@ -86,7 +86,7 @@ qla2x00_calc_iocbs_64(uint16_t dsds)
/**
* qla2x00_prep_cont_type0_iocb() - Initialize a Continuation Type 0 IOCB.
- * @ha: HA context
+ * @vha: HA context
*
* Returns a pointer to the Continuation Type 0 IOCB packet.
*/
@@ -114,7 +114,8 @@ qla2x00_prep_cont_type0_iocb(struct scsi_qla_host *vha)
/**
* qla2x00_prep_cont_type1_iocb() - Initialize a Continuation Type 1 IOCB.
- * @ha: HA context
+ * @vha: HA context
+ * @req: request queue
*
* Returns a pointer to the continuation type 1 IOCB packet.
*/
@@ -445,6 +446,8 @@ queuing_error:
/**
* qla2x00_start_iocbs() - Execute the IOCB command
+ * @vha: HA context
+ * @req: request queue
*/
void
qla2x00_start_iocbs(struct scsi_qla_host *vha, struct req_que *req)
@@ -486,7 +489,9 @@ qla2x00_start_iocbs(struct scsi_qla_host *vha, struct req_que *req)
/**
* qla2x00_marker() - Send a marker IOCB to the firmware.
- * @ha: HA context
+ * @vha: HA context
+ * @req: request queue
+ * @rsp: response queue
* @loop_id: loop ID
* @lun: LUN
* @type: marker modifier
@@ -1190,6 +1195,8 @@ qla24xx_walk_and_build_prot_sglist(struct qla_hw_data *ha, srb_t *sp,
* @sp: SRB command to process
* @cmd_pkt: Command type 3 IOCB
* @tot_dsds: Total number of segments to transfer
+ * @tot_prot_dsds:
+ * @fw_prot_opts:
*/
inline int
qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
@@ -1203,7 +1210,6 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
uint32_t dif_bytes;
uint8_t bundling = 1;
uint16_t blk_size;
- uint8_t *clr_ptr;
struct crc_context *crc_ctx_pkt = NULL;
struct qla_hw_data *ha;
uint8_t additional_fcpcdb_len;
@@ -1245,15 +1251,11 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
/* Allocate CRC context from global pool */
crc_ctx_pkt = sp->u.scmd.ctx =
- dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC, &crc_ctx_dma);
+ dma_pool_zalloc(ha->dl_dma_pool, GFP_ATOMIC, &crc_ctx_dma);
if (!crc_ctx_pkt)
goto crc_queuing_error;
- /* Zero out CTX area. */
- clr_ptr = (uint8_t *)crc_ctx_pkt;
- memset(clr_ptr, 0, sizeof(*crc_ctx_pkt));
-
crc_ctx_pkt->crc_ctx_dma = crc_ctx_dma;
sp->flags |= SRB_CRC_CTX_DMA_VALID;
@@ -3067,7 +3069,7 @@ sufficient_dsds:
}
memset(ctx, 0, sizeof(struct ct6_dsd));
- ctx->fcp_cmnd = dma_pool_alloc(ha->fcp_cmnd_dma_pool,
+ ctx->fcp_cmnd = dma_pool_zalloc(ha->fcp_cmnd_dma_pool,
GFP_ATOMIC, &ctx->fcp_cmnd_dma);
if (!ctx->fcp_cmnd) {
ql_log(ql_log_fatal, vha, 0x3011,
@@ -3120,7 +3122,6 @@ sufficient_dsds:
host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
/* build FCP_CMND IU */
- memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
int_to_scsilun(cmd->device->lun, &ctx->fcp_cmnd->lun);
ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len;
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 89f93ebd819d..7cacdc3408fa 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -259,7 +259,7 @@ qla2300_intr_handler(int irq, void *dev_id)
/**
* qla2x00_mbx_completion() - Process mailbox command completions.
- * @ha: SCSI driver HA context
+ * @vha: SCSI driver HA context
* @mb0: Mailbox0 register
*/
static void
@@ -613,7 +613,8 @@ qla2x00_find_fcport_by_nportid(scsi_qla_host_t *vha, port_id_t *id,
/**
* qla2x00_async_event() - Process aynchronous events.
- * @ha: SCSI driver HA context
+ * @vha: SCSI driver HA context
+ * @rsp: response queue
* @mb: Mailbox registers (0 - 3)
*/
void
@@ -767,7 +768,6 @@ skip_rio:
case MBA_LIP_OCCURRED: /* Loop Initialization Procedure */
ha->flags.lip_ae = 1;
- ha->flags.n2n_ae = 0;
ql_dbg(ql_dbg_async, vha, 0x5009,
"LIP occurred (%x).\n", mb[1]);
@@ -811,7 +811,6 @@ skip_rio:
case MBA_LOOP_DOWN: /* Loop Down Event */
SAVE_TOPO(ha);
- ha->flags.n2n_ae = 0;
ha->flags.lip_ae = 0;
ha->current_topology = 0;
@@ -885,7 +884,6 @@ skip_rio:
/* case MBA_DCBX_COMPLETE: */
case MBA_POINT_TO_POINT: /* Point-to-Point */
ha->flags.lip_ae = 0;
- ha->flags.n2n_ae = 1;
if (IS_QLA2100(ha))
break;
@@ -1256,7 +1254,8 @@ global_port_update:
/**
* qla2x00_process_completed_request() - Process a Fast Post response.
- * @ha: SCSI driver HA context
+ * @vha: SCSI driver HA context
+ * @req: request queue
* @index: SRB index
*/
void
@@ -1839,31 +1838,23 @@ qla24xx_tm_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, void *tsk)
sp->done(sp, 0);
}
-static void
-qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, void *tsk)
+static void qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
+ void *tsk, srb_t *sp)
{
- const char func[] = "NVME-IOCB";
fc_port_t *fcport;
- srb_t *sp;
struct srb_iocb *iocb;
struct sts_entry_24xx *sts = (struct sts_entry_24xx *)tsk;
uint16_t state_flags;
struct nvmefc_fcp_req *fd;
uint16_t ret = 0;
- struct srb_iocb *nvme;
-
- sp = qla2x00_get_sp_from_handle(vha, func, req, tsk);
- if (!sp)
- return;
iocb = &sp->u.iocb_cmd;
fcport = sp->fcport;
iocb->u.nvme.comp_status = le16_to_cpu(sts->comp_status);
state_flags = le16_to_cpu(sts->state_flags);
fd = iocb->u.nvme.desc;
- nvme = &sp->u.iocb_cmd;
- if (unlikely(nvme->u.nvme.aen_op))
+ if (unlikely(iocb->u.nvme.aen_op))
atomic_dec(&sp->vha->hw->nvme_active_aen_cnt);
/*
@@ -1897,42 +1888,30 @@ qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, void *tsk)
fd->transferred_length = fd->payload_length -
le32_to_cpu(sts->residual_len);
- /*
- * If transport error then Failure (HBA rejects request)
- * otherwise transport will handle.
- */
- if (sts->entry_status) {
- ql_log(ql_log_warn, fcport->vha, 0x5038,
- "NVME-%s error - hdl=%x entry-status(%x).\n",
- sp->name, sp->handle, sts->entry_status);
+ switch (le16_to_cpu(sts->comp_status)) {
+ case CS_COMPLETE:
+ ret = QLA_SUCCESS;
+ break;
+ case CS_ABORTED:
+ case CS_RESET:
+ case CS_PORT_UNAVAILABLE:
+ case CS_PORT_LOGGED_OUT:
+ case CS_PORT_BUSY:
+ ql_log(ql_log_warn, fcport->vha, 0x5060,
+ "NVME-%s ERR Handling - hdl=%x completion status(%x) resid=%x ox_id=%x\n",
+ sp->name, sp->handle, sts->comp_status,
+ le32_to_cpu(sts->residual_len), sts->ox_id);
+ fd->transferred_length = 0;
+ iocb->u.nvme.rsp_pyld_len = 0;
+ ret = QLA_ABORTED;
+ break;
+ default:
+ ql_log(ql_log_warn, fcport->vha, 0x5060,
+ "NVME-%s error - hdl=%x completion status(%x) resid=%x ox_id=%x\n",
+ sp->name, sp->handle, sts->comp_status,
+ le32_to_cpu(sts->residual_len), sts->ox_id);
ret = QLA_FUNCTION_FAILED;
- } else {
- switch (le16_to_cpu(sts->comp_status)) {
- case CS_COMPLETE:
- ret = 0;
- break;
-
- case CS_ABORTED:
- case CS_RESET:
- case CS_PORT_UNAVAILABLE:
- case CS_PORT_LOGGED_OUT:
- case CS_PORT_BUSY:
- ql_log(ql_log_warn, fcport->vha, 0x5060,
- "NVME-%s ERR Handling - hdl=%x completion status(%x) resid=%x ox_id=%x\n",
- sp->name, sp->handle, sts->comp_status,
- le32_to_cpu(sts->residual_len), sts->ox_id);
- fd->transferred_length = fd->payload_length;
- ret = QLA_ABORTED;
- break;
-
- default:
- ql_log(ql_log_warn, fcport->vha, 0x5060,
- "NVME-%s error - hdl=%x completion status(%x) resid=%x ox_id=%x\n",
- sp->name, sp->handle, sts->comp_status,
- le32_to_cpu(sts->residual_len), sts->ox_id);
- ret = QLA_FUNCTION_FAILED;
- break;
- }
+ break;
}
sp->done(sp, ret);
}
@@ -1970,7 +1949,7 @@ static void qla_ctrlvp_completed(scsi_qla_host_t *vha, struct req_que *req,
/**
* qla2x00_process_response_queue() - Process response queue entries.
- * @ha: SCSI driver HA context
+ * @rsp: response queue
*/
void
qla2x00_process_response_queue(struct rsp_que *rsp)
@@ -2374,7 +2353,8 @@ done:
/**
* qla2x00_status_entry() - Process a Status IOCB entry.
- * @ha: SCSI driver HA context
+ * @vha: SCSI driver HA context
+ * @rsp: response queue
* @pkt: Entry pointer
*/
static void
@@ -2459,7 +2439,8 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
/* NVME completion. */
if (sp->type == SRB_NVME_CMD) {
- qla24xx_nvme_iocb_entry(vha, req, pkt);
+ req->outstanding_cmds[handle] = NULL;
+ qla24xx_nvme_iocb_entry(vha, req, pkt, sp);
return;
}
@@ -2751,7 +2732,7 @@ out:
/**
* qla2x00_status_cont_entry() - Process a Status Continuations entry.
- * @ha: SCSI driver HA context
+ * @rsp: response queue
* @pkt: Entry pointer
*
* Extended sense data.
@@ -2809,7 +2790,8 @@ qla2x00_status_cont_entry(struct rsp_que *rsp, sts_cont_entry_t *pkt)
/**
* qla2x00_error_entry() - Process an error entry.
- * @ha: SCSI driver HA context
+ * @vha: SCSI driver HA context
+ * @rsp: response queue
* @pkt: Entry pointer
* return : 1=allow further error analysis. 0=no additional error analysis.
*/
@@ -2868,7 +2850,7 @@ fatal:
/**
* qla24xx_mbx_completion() - Process mailbox command completions.
- * @ha: SCSI driver HA context
+ * @vha: SCSI driver HA context
* @mb0: Mailbox0 register
*/
static void
@@ -2937,7 +2919,8 @@ void qla24xx_nvme_ls4_iocb(struct scsi_qla_host *vha,
/**
* qla24xx_process_response_queue() - Process response queue entries.
- * @ha: SCSI driver HA context
+ * @vha: SCSI driver HA context
+ * @rsp: response queue
*/
void qla24xx_process_response_queue(struct scsi_qla_host *vha,
struct rsp_que *rsp)
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 7397aeddd96c..5db0262d5c94 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -503,11 +503,19 @@ mbx_done:
}
pr_warn(" cmd=%x ****\n", command);
}
- ql_dbg(ql_dbg_mbx, vha, 0x1198,
- "host_status=%#x intr_ctrl=%#x intr_status=%#x\n",
- RD_REG_DWORD(&reg->isp24.host_status),
- RD_REG_DWORD(&reg->isp24.ictrl),
- RD_REG_DWORD(&reg->isp24.istatus));
+ if (IS_FWI2_CAPABLE(ha) && !(IS_P3P_TYPE(ha))) {
+ ql_dbg(ql_dbg_mbx, vha, 0x1198,
+ "host_status=%#x intr_ctrl=%#x intr_status=%#x\n",
+ RD_REG_DWORD(&reg->isp24.host_status),
+ RD_REG_DWORD(&reg->isp24.ictrl),
+ RD_REG_DWORD(&reg->isp24.istatus));
+ } else {
+ ql_dbg(ql_dbg_mbx, vha, 0x1206,
+ "ctrl_status=%#x ictrl=%#x istatus=%#x\n",
+ RD_REG_WORD(&reg->isp.ctrl_status),
+ RD_REG_WORD(&reg->isp.ictrl),
+ RD_REG_WORD(&reg->isp.istatus));
+ }
} else {
ql_dbg(ql_dbg_mbx, base_vha, 0x1021, "Done %s.\n", __func__);
}
@@ -1025,9 +1033,12 @@ qla2x00_get_fw_version(scsi_qla_host_t *vha)
* FW supports nvme and driver load parameter requested nvme.
* BIT 26 of fw_attributes indicates NVMe support.
*/
- if ((ha->fw_attributes_h & 0x400) && ql2xnvmeenable)
+ if ((ha->fw_attributes_h & 0x400) && ql2xnvmeenable) {
vha->flags.nvme_enabled = 1;
-
+ ql_log(ql_log_info, vha, 0xd302,
+ "%s: FC-NVMe is Enabled (0x%x)\n",
+ __func__, ha->fw_attributes_h);
+ }
}
if (IS_QLA27XX(ha)) {
@@ -3385,7 +3396,10 @@ qla8044_read_serdes_word(scsi_qla_host_t *vha, uint32_t addr, uint32_t *data)
/**
* qla2x00_set_serdes_params() -
- * @ha: HA context
+ * @vha: HA context
+ * @sw_em_1g:
+ * @sw_em_2g:
+ * @sw_em_4g:
*
* Returns
*/
@@ -3744,6 +3758,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
id.b.area = rptid_entry->port_id[1];
id.b.al_pa = rptid_entry->port_id[0];
id.b.rsvd_1 = 0;
+ ha->flags.n2n_ae = 0;
if (rptid_entry->format == 0) {
/* loop */
@@ -3796,6 +3811,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
set_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags);
set_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags);
set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
+ ha->flags.n2n_ae = 1;
return;
}
@@ -3872,6 +3888,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
vha->d_id.b.area = rptid_entry->port_id[1];
vha->d_id.b.al_pa = rptid_entry->port_id[0];
+ ha->flags.n2n_ae = 1;
spin_lock_irqsave(&ha->vport_slock, flags);
qlt_update_vp_map(vha, SET_AL_PA);
spin_unlock_irqrestore(&ha->vport_slock, flags);
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index e965b16f21e3..da85cd89639f 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -778,18 +778,12 @@ static void qla_do_work(struct work_struct *work)
struct qla_qpair *qpair = container_of(work, struct qla_qpair, q_work);
struct scsi_qla_host *vha;
struct qla_hw_data *ha = qpair->hw;
- struct srb_iocb *nvme, *nxt_nvme;
spin_lock_irqsave(&qpair->qp_lock, flags);
vha = pci_get_drvdata(ha->pdev);
qla24xx_process_response_queue(vha, qpair->rsp);
spin_unlock_irqrestore(&qpair->qp_lock, flags);
- list_for_each_entry_safe(nvme, nxt_nvme, &qpair->nvme_done_list,
- u.nvme.entry) {
- list_del_init(&nvme->u.nvme.entry);
- qla_nvme_cmpl_io(nvme);
- }
}
/* create response queue */
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index d5da3981cefe..7113acf42ff3 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -490,7 +490,7 @@ qlafx00_mbx_reg_test(scsi_qla_host_t *vha)
/**
* qlafx00_pci_config() - Setup ISPFx00 PCI configuration registers.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -519,9 +519,9 @@ qlafx00_pci_config(scsi_qla_host_t *vha)
/**
* qlafx00_warm_reset() - Perform warm reset of iSA(CPUs being reset on SOC).
- * @ha: HA context
+ * @vha: HA context
*
- */
+ */
static inline void
qlafx00_soc_cpu_reset(scsi_qla_host_t *vha)
{
@@ -625,7 +625,7 @@ qlafx00_soc_cpu_reset(scsi_qla_host_t *vha)
/**
* qlafx00_soft_reset() - Soft Reset ISPFx00.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -644,7 +644,7 @@ qlafx00_soft_reset(scsi_qla_host_t *vha)
/**
* qlafx00_chip_diag() - Test ISPFx00 for proper operation.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -1408,7 +1408,7 @@ qlafx00_abort_isp_cleanup(scsi_qla_host_t *vha, bool critemp)
/**
* qlafx00_init_response_q_entries() - Initializes response queue entries.
- * @ha: HA context
+ * @rsp: response queue
*
* Beginning of request ring has initialization control block already built
* by nvram config routine.
@@ -2269,7 +2269,8 @@ qlafx00_ioctl_iosb_entry(scsi_qla_host_t *vha, struct req_que *req,
/**
* qlafx00_status_entry() - Process a Status IOCB entry.
- * @ha: SCSI driver HA context
+ * @vha: SCSI driver HA context
+ * @rsp: response queue
* @pkt: Entry pointer
*/
static void
@@ -2542,7 +2543,7 @@ check_scsi_status:
/**
* qlafx00_status_cont_entry() - Process a Status Continuations entry.
- * @ha: SCSI driver HA context
+ * @rsp: response queue
* @pkt: Entry pointer
*
* Extended sense data.
@@ -2620,7 +2621,9 @@ qlafx00_status_cont_entry(struct rsp_que *rsp, sts_cont_entry_t *pkt)
/**
* qlafx00_multistatus_entry() - Process Multi response queue entries.
- * @ha: SCSI driver HA context
+ * @vha: SCSI driver HA context
+ * @rsp: response queue
+ * @pkt:
*/
static void
qlafx00_multistatus_entry(struct scsi_qla_host *vha,
@@ -2674,8 +2677,11 @@ qlafx00_multistatus_entry(struct scsi_qla_host *vha,
/**
* qlafx00_error_entry() - Process an error entry.
- * @ha: SCSI driver HA context
+ * @vha: SCSI driver HA context
+ * @rsp: response queue
* @pkt: Entry pointer
+ * @estatus:
+ * @etype:
*/
static void
qlafx00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp,
@@ -2705,7 +2711,8 @@ qlafx00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp,
/**
* qlafx00_process_response_queue() - Process response queue entries.
- * @ha: SCSI driver HA context
+ * @vha: SCSI driver HA context
+ * @rsp: response queue
*/
static void
qlafx00_process_response_queue(struct scsi_qla_host *vha,
@@ -2781,7 +2788,7 @@ qlafx00_process_response_queue(struct scsi_qla_host *vha,
/**
* qlafx00_async_event() - Process aynchronous events.
- * @ha: SCSI driver HA context
+ * @vha: SCSI driver HA context
*/
static void
qlafx00_async_event(scsi_qla_host_t *vha)
@@ -2857,10 +2864,9 @@ qlafx00_async_event(scsi_qla_host_t *vha)
}
/**
- *
* qlafx00x_mbx_completion() - Process mailbox command completions.
- * @ha: SCSI driver HA context
- * @mb16: Mailbox16 register
+ * @vha: SCSI driver HA context
+ * @mb0:
*/
static void
qlafx00_mbx_completion(scsi_qla_host_t *vha, uint32_t mb0)
diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index 6b33a1f24f56..c5a963c2c86e 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -16,15 +16,13 @@ static void qla_nvme_unregister_remote_port(struct work_struct *);
int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport)
{
- struct nvme_rport *rport;
+ struct qla_nvme_rport *rport;
+ struct nvme_fc_port_info req;
int ret;
if (!IS_ENABLED(CONFIG_NVME_FC))
return 0;
- if (fcport->nvme_flag & NVME_FLAG_REGISTERED)
- return 0;
-
if (!vha->flags.nvme_enabled) {
ql_log(ql_log_info, vha, 0x2100,
"%s: Not registering target since Host NVME is not enabled\n",
@@ -33,38 +31,36 @@ int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport)
}
if (!(fcport->nvme_prli_service_param &
- (NVME_PRLI_SP_TARGET | NVME_PRLI_SP_DISCOVERY)))
+ (NVME_PRLI_SP_TARGET | NVME_PRLI_SP_DISCOVERY)) ||
+ (fcport->nvme_flag & NVME_FLAG_REGISTERED))
return 0;
INIT_WORK(&fcport->nvme_del_work, qla_nvme_unregister_remote_port);
- rport = kzalloc(sizeof(*rport), GFP_KERNEL);
- if (!rport) {
- ql_log(ql_log_warn, vha, 0x2101,
- "%s: unable to alloc memory\n", __func__);
- return -ENOMEM;
- }
+ fcport->nvme_flag &= ~NVME_FLAG_RESETTING;
- rport->req.port_name = wwn_to_u64(fcport->port_name);
- rport->req.node_name = wwn_to_u64(fcport->node_name);
- rport->req.port_role = 0;
+ memset(&req, 0, sizeof(struct nvme_fc_port_info));
+ req.port_name = wwn_to_u64(fcport->port_name);
+ req.node_name = wwn_to_u64(fcport->node_name);
+ req.port_role = 0;
+ req.dev_loss_tmo = NVME_FC_DEV_LOSS_TMO;
if (fcport->nvme_prli_service_param & NVME_PRLI_SP_INITIATOR)
- rport->req.port_role = FC_PORT_ROLE_NVME_INITIATOR;
+ req.port_role = FC_PORT_ROLE_NVME_INITIATOR;
if (fcport->nvme_prli_service_param & NVME_PRLI_SP_TARGET)
- rport->req.port_role |= FC_PORT_ROLE_NVME_TARGET;
+ req.port_role |= FC_PORT_ROLE_NVME_TARGET;
if (fcport->nvme_prli_service_param & NVME_PRLI_SP_DISCOVERY)
- rport->req.port_role |= FC_PORT_ROLE_NVME_DISCOVERY;
+ req.port_role |= FC_PORT_ROLE_NVME_DISCOVERY;
- rport->req.port_id = fcport->d_id.b24;
+ req.port_id = fcport->d_id.b24;
ql_log(ql_log_info, vha, 0x2102,
"%s: traddr=nn-0x%016llx:pn-0x%016llx PortID:%06x\n",
- __func__, rport->req.node_name, rport->req.port_name,
- rport->req.port_id);
+ __func__, req.node_name, req.port_name,
+ req.port_id);
- ret = nvme_fc_register_remoteport(vha->nvme_local_port, &rport->req,
+ ret = nvme_fc_register_remoteport(vha->nvme_local_port, &req,
&fcport->nvme_remote_port);
if (ret) {
ql_log(ql_log_warn, vha, 0x212e,
@@ -73,10 +69,11 @@ int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport)
return ret;
}
- fcport->nvme_remote_port->private = fcport;
- fcport->nvme_flag |= NVME_FLAG_REGISTERED;
+ rport = fcport->nvme_remote_port->private;
rport->fcport = fcport;
list_add_tail(&rport->list, &vha->nvme_rport_list);
+
+ fcport->nvme_flag |= NVME_FLAG_REGISTERED;
return 0;
}
@@ -113,8 +110,6 @@ static int qla_nvme_alloc_queue(struct nvme_fc_local_port *lport,
return 0;
}
- ql_log(ql_log_warn, vha, 0xffff,
- "allocating q for idx=%x w/o cpu mask\n", qidx);
qpair = qla2xxx_create_qpair(vha, 5, vha->vp_idx, true);
if (qpair == NULL) {
ql_log(ql_log_warn, vha, 0x2122,
@@ -154,16 +149,6 @@ static void qla_nvme_sp_ls_done(void *ptr, int res)
qla2x00_rel_sp(sp);
}
-void qla_nvme_cmpl_io(struct srb_iocb *nvme)
-{
- srb_t *sp;
- struct nvmefc_fcp_req *fd = nvme->u.nvme.desc;
-
- sp = container_of(nvme, srb_t, u.iocb_cmd);
- fd->done(fd);
- qla2xxx_rel_qpair_sp(sp->qpair, sp);
-}
-
static void qla_nvme_sp_done(void *ptr, int res)
{
srb_t *sp = ptr;
@@ -176,36 +161,42 @@ static void qla_nvme_sp_done(void *ptr, int res)
if (!atomic_dec_and_test(&sp->ref_count))
return;
- if (!(sp->fcport->nvme_flag & NVME_FLAG_REGISTERED))
- goto rel;
-
- if (unlikely(res == QLA_FUNCTION_FAILED))
- fd->status = NVME_SC_INTERNAL;
- else
+ if (res == QLA_SUCCESS)
fd->status = 0;
+ else
+ fd->status = NVME_SC_INTERNAL;
fd->rcv_rsplen = nvme->u.nvme.rsp_pyld_len;
- list_add_tail(&nvme->u.nvme.entry, &sp->qpair->nvme_done_list);
- return;
-rel:
+ fd->done(fd);
qla2xxx_rel_qpair_sp(sp->qpair, sp);
+
+ return;
}
-static void qla_nvme_ls_abort(struct nvme_fc_local_port *lport,
- struct nvme_fc_remote_port *rport, struct nvmefc_ls_req *fd)
+static void qla_nvme_abort_work(struct work_struct *work)
{
- struct nvme_private *priv = fd->private;
- fc_port_t *fcport = rport->private;
+ struct nvme_private *priv =
+ container_of(work, struct nvme_private, abort_work);
srb_t *sp = priv->sp;
- int rval;
+ fc_port_t *fcport = sp->fcport;
struct qla_hw_data *ha = fcport->vha->hw;
+ int rval;
rval = ha->isp_ops->abort_command(sp);
ql_dbg(ql_dbg_io, fcport->vha, 0x212b,
- "%s: %s LS command for sp=%p on fcport=%p rval=%x\n", __func__,
- (rval != QLA_SUCCESS) ? "Failed to abort" : "Aborted",
- sp, fcport, rval);
+ "%s: %s command for sp=%p, handle=%x on fcport=%p rval=%x\n",
+ __func__, (rval != QLA_SUCCESS) ? "Failed to abort" : "Aborted",
+ sp, sp->handle, fcport, rval);
+}
+
+static void qla_nvme_ls_abort(struct nvme_fc_local_port *lport,
+ struct nvme_fc_remote_port *rport, struct nvmefc_ls_req *fd)
+{
+ struct nvme_private *priv = fd->private;
+
+ INIT_WORK(&priv->abort_work, qla_nvme_abort_work);
+ schedule_work(&priv->abort_work);
}
static void qla_nvme_ls_complete(struct work_struct *work)
@@ -220,7 +211,8 @@ static void qla_nvme_ls_complete(struct work_struct *work)
static int qla_nvme_ls_req(struct nvme_fc_local_port *lport,
struct nvme_fc_remote_port *rport, struct nvmefc_ls_req *fd)
{
- fc_port_t *fcport = rport->private;
+ struct qla_nvme_rport *qla_rport = rport->private;
+ fc_port_t *fcport = qla_rport->fcport;
struct srb_iocb *nvme;
struct nvme_private *priv = fd->private;
struct scsi_qla_host *vha;
@@ -228,9 +220,6 @@ static int qla_nvme_ls_req(struct nvme_fc_local_port *lport,
struct qla_hw_data *ha;
srb_t *sp;
- if (!(fcport->nvme_flag & NVME_FLAG_REGISTERED))
- return rval;
-
vha = fcport->vha;
ha = vha->hw;
/* Alloc SRB structure */
@@ -275,32 +264,23 @@ static void qla_nvme_fcp_abort(struct nvme_fc_local_port *lport,
struct nvmefc_fcp_req *fd)
{
struct nvme_private *priv = fd->private;
- srb_t *sp = priv->sp;
- int rval;
- fc_port_t *fcport = rport->private;
- struct qla_hw_data *ha = fcport->vha->hw;
-
- rval = ha->isp_ops->abort_command(sp);
- ql_dbg(ql_dbg_io, fcport->vha, 0x2127,
- "%s: %s command for sp=%p on fcport=%p rval=%x\n", __func__,
- (rval != QLA_SUCCESS) ? "Failed to abort" : "Aborted",
- sp, fcport, rval);
+ INIT_WORK(&priv->abort_work, qla_nvme_abort_work);
+ schedule_work(&priv->abort_work);
}
static void qla_nvme_poll(struct nvme_fc_local_port *lport, void *hw_queue_handle)
{
- struct scsi_qla_host *vha = lport->private;
- unsigned long flags;
struct qla_qpair *qpair = hw_queue_handle;
+ unsigned long flags;
+ struct scsi_qla_host *vha = lport->private;
- /* Acquire ring specific lock */
spin_lock_irqsave(&qpair->qp_lock, flags);
qla24xx_process_response_queue(vha, qpair->rsp);
spin_unlock_irqrestore(&qpair->qp_lock, flags);
}
-static int qla2x00_start_nvme_mq(srb_t *sp)
+static inline int qla2x00_start_nvme_mq(srb_t *sp)
{
unsigned long flags;
uint32_t *clr_ptr;
@@ -313,7 +293,6 @@ static int qla2x00_start_nvme_mq(srb_t *sp)
uint16_t avail_dsds;
uint32_t *cur_dsd;
struct req_que *req = NULL;
- struct rsp_que *rsp = NULL;
struct scsi_qla_host *vha = sp->fcport->vha;
struct qla_hw_data *ha = vha->hw;
struct qla_qpair *qpair = sp->qpair;
@@ -322,15 +301,13 @@ static int qla2x00_start_nvme_mq(srb_t *sp)
struct nvmefc_fcp_req *fd = nvme->u.nvme.desc;
uint32_t rval = QLA_SUCCESS;
+ /* Setup qpair pointers */
+ req = qpair->req;
tot_dsds = fd->sg_cnt;
/* Acquire qpair specific lock */
spin_lock_irqsave(&qpair->qp_lock, flags);
- /* Setup qpair pointers */
- req = qpair->req;
- rsp = qpair->rsp;
-
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
for (index = 1; index < req->num_outstanding_cmds; index++) {
@@ -342,7 +319,7 @@ static int qla2x00_start_nvme_mq(srb_t *sp)
}
if (index == req->num_outstanding_cmds) {
- rval = -1;
+ rval = -EBUSY;
goto queuing_error;
}
req_cnt = qla24xx_calc_iocbs(vha, tot_dsds);
@@ -356,7 +333,7 @@ static int qla2x00_start_nvme_mq(srb_t *sp)
req->cnt = req->length - (req->ring_index - cnt);
if (req->cnt < (req_cnt + 2)){
- rval = -1;
+ rval = -EBUSY;
goto queuing_error;
}
}
@@ -365,7 +342,7 @@ static int qla2x00_start_nvme_mq(srb_t *sp)
struct nvme_fc_cmd_iu *cmd = fd->cmdaddr;
if (cmd->sqe.common.opcode == nvme_admin_async_event) {
nvme->u.nvme.aen_op = 1;
- atomic_inc(&vha->hw->nvme_active_aen_cnt);
+ atomic_inc(&ha->nvme_active_aen_cnt);
}
}
@@ -478,11 +455,6 @@ static int qla2x00_start_nvme_mq(srb_t *sp)
/* Set chip new ring index. */
WRT_REG_DWORD(req->req_q_in, req->ring_index);
- /* Manage unprocessed RIO/ZIO commands in response queue. */
- if (vha->flags.process_response_queue &&
- rsp->ring_ptr->signature != RESPONSE_PROCESSED)
- qla24xx_process_response_queue(vha, rsp);
-
queuing_error:
spin_unlock_irqrestore(&qpair->qp_lock, flags);
return rval;
@@ -496,31 +468,44 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport,
fc_port_t *fcport;
struct srb_iocb *nvme;
struct scsi_qla_host *vha;
- int rval = QLA_FUNCTION_FAILED;
+ int rval = -ENODEV;
srb_t *sp;
struct qla_qpair *qpair = hw_queue_handle;
struct nvme_private *priv;
+ struct qla_nvme_rport *qla_rport = rport->private;
- if (!fd) {
- ql_log(ql_log_warn, NULL, 0x2134, "NO NVMe FCP request\n");
+ if (!fd || !qpair) {
+ ql_log(ql_log_warn, NULL, 0x2134,
+ "NO NVMe request or Queue Handle\n");
return rval;
}
priv = fd->private;
- fcport = rport->private;
+ fcport = qla_rport->fcport;
if (!fcport) {
ql_log(ql_log_warn, NULL, 0x210e, "No fcport ptr\n");
return rval;
}
vha = fcport->vha;
- if ((!qpair) || (!(fcport->nvme_flag & NVME_FLAG_REGISTERED)))
+
+ if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
+ return rval;
+
+ /*
+ * If we know the dev is going away while the transport is still sending
+ * IO's return busy back to stall the IO Q. This happens when the
+ * link goes away and fw hasn't notified us yet, but IO's are being
+ * returned. If the dev comes back quickly we won't exhaust the IO
+ * retry count at the core.
+ */
+ if (fcport->nvme_flag & NVME_FLAG_RESETTING)
return -EBUSY;
/* Alloc SRB structure */
sp = qla2xxx_get_qpair_sp(qpair, fcport, GFP_ATOMIC);
if (!sp)
- return -EIO;
+ return -EBUSY;
atomic_set(&sp->ref_count, 1);
init_waitqueue_head(&sp->nvme_ls_waitq);
@@ -538,7 +523,6 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport,
"qla2x00_start_nvme_mq failed = %d\n", rval);
atomic_dec(&sp->ref_count);
wake_up(&sp->nvme_ls_waitq);
- return -EIO;
}
return rval;
@@ -557,22 +541,27 @@ static void qla_nvme_localport_delete(struct nvme_fc_local_port *lport)
static void qla_nvme_remoteport_delete(struct nvme_fc_remote_port *rport)
{
fc_port_t *fcport;
- struct nvme_rport *r_port, *trport;
+ struct qla_nvme_rport *qla_rport = rport->private, *trport;
- fcport = rport->private;
+ fcport = qla_rport->fcport;
fcport->nvme_remote_port = NULL;
fcport->nvme_flag &= ~NVME_FLAG_REGISTERED;
- list_for_each_entry_safe(r_port, trport,
+ list_for_each_entry_safe(qla_rport, trport,
&fcport->vha->nvme_rport_list, list) {
- if (r_port->fcport == fcport) {
- list_del(&r_port->list);
+ if (qla_rport->fcport == fcport) {
+ list_del(&qla_rport->list);
break;
}
}
- kfree(r_port);
complete(&fcport->nvme_del_done);
+ if (!test_bit(UNLOADING, &fcport->vha->dpc_flags)) {
+ INIT_WORK(&fcport->free_work, qlt_free_session_done);
+ schedule_work(&fcport->free_work);
+ }
+
+ fcport->nvme_flag &= ~(NVME_FLAG_REGISTERED | NVME_FLAG_DELETING);
ql_log(ql_log_info, fcport->vha, 0x2110,
"remoteport_delete of %p completed.\n", fcport);
}
@@ -592,7 +581,7 @@ static struct nvme_fc_port_template qla_nvme_fc_transport = {
.max_dif_sgl_segments = 64,
.dma_boundary = 0xFFFFFFFF,
.local_priv_sz = 8,
- .remote_priv_sz = 0,
+ .remote_priv_sz = sizeof(struct qla_nvme_rport),
.lsrqst_priv_sz = sizeof(struct nvme_private),
.fcprqst_priv_sz = sizeof(struct nvme_private),
};
@@ -611,37 +600,25 @@ static int qla_nvme_wait_on_command(srb_t *sp)
return ret;
}
-static int qla_nvme_wait_on_rport_del(fc_port_t *fcport)
-{
- int ret = QLA_SUCCESS;
- int timeout;
-
- timeout = wait_for_completion_timeout(&fcport->nvme_del_done,
- msecs_to_jiffies(2000));
- if (!timeout) {
- ret = QLA_FUNCTION_FAILED;
- ql_log(ql_log_info, fcport->vha, 0x2111,
- "timed out waiting for fcport=%p to delete\n", fcport);
- }
-
- return ret;
-}
-
-void qla_nvme_abort(struct qla_hw_data *ha, struct srb *sp)
+void qla_nvme_abort(struct qla_hw_data *ha, struct srb *sp, int res)
{
int rval;
- rval = ha->isp_ops->abort_command(sp);
- if (!rval && !qla_nvme_wait_on_command(sp))
- ql_log(ql_log_warn, NULL, 0x2112,
- "nvme_wait_on_comand timed out waiting on sp=%p\n", sp);
+ if (!test_bit(ABORT_ISP_ACTIVE, &sp->vha->dpc_flags)) {
+ rval = ha->isp_ops->abort_command(sp);
+ if (!rval && !qla_nvme_wait_on_command(sp))
+ ql_log(ql_log_warn, NULL, 0x2112,
+ "timed out waiting on sp=%p\n", sp);
+ } else {
+ sp->done(sp, res);
+ }
}
static void qla_nvme_unregister_remote_port(struct work_struct *work)
{
struct fc_port *fcport = container_of(work, struct fc_port,
nvme_del_work);
- struct nvme_rport *rport, *trport;
+ struct qla_nvme_rport *qla_rport, *trport;
if (!IS_ENABLED(CONFIG_NVME_FC))
return;
@@ -649,51 +626,53 @@ static void qla_nvme_unregister_remote_port(struct work_struct *work)
ql_log(ql_log_warn, NULL, 0x2112,
"%s: unregister remoteport on %p\n",__func__, fcport);
- list_for_each_entry_safe(rport, trport,
+ list_for_each_entry_safe(qla_rport, trport,
&fcport->vha->nvme_rport_list, list) {
- if (rport->fcport == fcport) {
+ if (qla_rport->fcport == fcport) {
ql_log(ql_log_info, fcport->vha, 0x2113,
"%s: fcport=%p\n", __func__, fcport);
init_completion(&fcport->nvme_del_done);
nvme_fc_unregister_remoteport(
fcport->nvme_remote_port);
- qla_nvme_wait_on_rport_del(fcport);
+ wait_for_completion(&fcport->nvme_del_done);
+ break;
}
}
}
void qla_nvme_delete(struct scsi_qla_host *vha)
{
- struct nvme_rport *rport, *trport;
+ struct qla_nvme_rport *qla_rport, *trport;
fc_port_t *fcport;
int nv_ret;
if (!IS_ENABLED(CONFIG_NVME_FC))
return;
- list_for_each_entry_safe(rport, trport, &vha->nvme_rport_list, list) {
- fcport = rport->fcport;
+ list_for_each_entry_safe(qla_rport, trport,
+ &vha->nvme_rport_list, list) {
+ fcport = qla_rport->fcport;
ql_log(ql_log_info, fcport->vha, 0x2114, "%s: fcport=%p\n",
__func__, fcport);
+ nvme_fc_set_remoteport_devloss(fcport->nvme_remote_port, 0);
init_completion(&fcport->nvme_del_done);
nvme_fc_unregister_remoteport(fcport->nvme_remote_port);
- qla_nvme_wait_on_rport_del(fcport);
+ wait_for_completion(&fcport->nvme_del_done);
}
if (vha->nvme_local_port) {
init_completion(&vha->nvme_del_done);
+ ql_log(ql_log_info, vha, 0x2116,
+ "unregister localport=%p\n",
+ vha->nvme_local_port);
nv_ret = nvme_fc_unregister_localport(vha->nvme_local_port);
- if (nv_ret == 0)
- ql_log(ql_log_info, vha, 0x2116,
- "unregistered localport=%p\n",
- vha->nvme_local_port);
- else
+ if (nv_ret)
ql_log(ql_log_info, vha, 0x2115,
"Unregister of localport failed\n");
- wait_for_completion_timeout(&vha->nvme_del_done,
- msecs_to_jiffies(5000));
+ else
+ wait_for_completion(&vha->nvme_del_done);
}
}
diff --git a/drivers/scsi/qla2xxx/qla_nvme.h b/drivers/scsi/qla2xxx/qla_nvme.h
index 7f05fa1c77db..816854ada654 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.h
+++ b/drivers/scsi/qla2xxx/qla_nvme.h
@@ -14,6 +14,9 @@
#include "qla_def.h"
+/* default dev loss time (seconds) before transport tears down ctrl */
+#define NVME_FC_DEV_LOSS_TMO 30
+
#define NVME_ATIO_CMD_OFF 32
#define NVME_FIRST_PACKET_CMDLEN (64 - NVME_ATIO_CMD_OFF)
#define Q2T_NVME_NUM_TAGS 2048
@@ -28,11 +31,11 @@ struct nvme_private {
struct srb *sp;
struct nvmefc_ls_req *fd;
struct work_struct ls_work;
+ struct work_struct abort_work;
int comp_status;
};
-struct nvme_rport {
- struct nvme_fc_port_info req;
+struct qla_nvme_rport {
struct list_head list;
struct fc_port *fcport;
};
@@ -142,7 +145,7 @@ struct pt_ls4_rx_unsol {
void qla_nvme_register_hba(struct scsi_qla_host *);
int qla_nvme_register_remote(struct scsi_qla_host *, struct fc_port *);
void qla_nvme_delete(struct scsi_qla_host *);
-void qla_nvme_abort(struct qla_hw_data *, struct srb *sp);
+void qla_nvme_abort(struct qla_hw_data *, struct srb *sp, int res);
void qla24xx_nvme_ls4_iocb(struct scsi_qla_host *, struct pt_ls4_request *,
struct req_que *);
void qla24xx_async_gffid_sp_done(void *, int);
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index a77c33987703..872d66dd79cd 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1732,7 +1732,7 @@ iospace_error_exit:
/**
* qla82xx_pci_config() - Setup ISP82xx PCI configuration registers.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -1753,7 +1753,7 @@ qla82xx_pci_config(scsi_qla_host_t *vha)
/**
* qla82xx_reset_chip() - Setup ISP82xx PCI configuration registers.
- * @ha: HA context
+ * @vha: HA context
*
* Returns 0 on success.
*/
@@ -2008,11 +2008,10 @@ qla82xx_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0)
"MBX pointer ERROR.\n");
}
-/*
+/**
* qla82xx_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
* @irq:
* @dev_id: SCSI driver HA context
- * @regs:
*
* Called by system whenever the host adapter generates an interrupt.
*
diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c
index 525ac35a757b..3a2b0282df14 100644
--- a/drivers/scsi/qla2xxx/qla_nx2.c
+++ b/drivers/scsi/qla2xxx/qla_nx2.c
@@ -280,9 +280,8 @@ qla8044_clear_qsnt_ready(struct scsi_qla_host *vha)
}
/**
- *
* qla8044_lock_recovery - Recovers the idc_lock.
- * @ha : Pointer to adapter structure
+ * @vha : Pointer to adapter structure
*
* Lock Recovery Register
* 5-2 Lock recovery owner: Function ID of driver doing lock recovery,
@@ -1639,10 +1638,10 @@ qla8044_set_rst_ready(struct scsi_qla_host *vha)
/**
* qla8044_need_reset_handler - Code to start reset sequence
- * @ha: pointer to adapter structure
+ * @vha: pointer to adapter structure
*
* Note: IDC lock must be held upon entry
- **/
+ */
static void
qla8044_need_reset_handler(struct scsi_qla_host *vha)
{
@@ -1859,8 +1858,8 @@ exit_update_idc_reg:
/**
* qla8044_need_qsnt_handler - Code to start qsnt
- * @ha: pointer to adapter structure
- **/
+ * @vha: pointer to adapter structure
+ */
static void
qla8044_need_qsnt_handler(struct scsi_qla_host *vha)
{
@@ -2031,10 +2030,10 @@ exit_error:
/**
* qla4_8xxx_check_temp - Check the ISP82XX temperature.
- * @ha: adapter block pointer.
+ * @vha: adapter block pointer.
*
* Note: The caller should not hold the idc lock.
- **/
+ */
static int
qla8044_check_temp(struct scsi_qla_host *vha)
{
@@ -2071,10 +2070,10 @@ int qla8044_read_temperature(scsi_qla_host_t *vha)
/**
* qla8044_check_fw_alive - Check firmware health
- * @ha: Pointer to host adapter structure.
+ * @vha: Pointer to host adapter structure.
*
* Context: Interrupt
- **/
+ */
int
qla8044_check_fw_alive(struct scsi_qla_host *vha)
{
diff --git a/drivers/scsi/qla2xxx/qla_nx2.h b/drivers/scsi/qla2xxx/qla_nx2.h
index 83c1b7e17c80..8ba7c1db07c3 100644
--- a/drivers/scsi/qla2xxx/qla_nx2.h
+++ b/drivers/scsi/qla2xxx/qla_nx2.h
@@ -23,10 +23,6 @@
#define MD_MIU_TEST_AGT_WRDATA_HI 0x410000A4
#define MD_MIU_TEST_AGT_WRDATA_ULO 0x410000B0
#define MD_MIU_TEST_AGT_WRDATA_UHI 0x410000B4
-#define MD_MIU_TEST_AGT_RDDATA_LO 0x410000A8
-#define MD_MIU_TEST_AGT_RDDATA_HI 0x410000AC
-#define MD_MIU_TEST_AGT_RDDATA_ULO 0x410000B8
-#define MD_MIU_TEST_AGT_RDDATA_UHI 0x410000BC
/* MIU_TEST_AGT_CTRL flags. work for SIU as well */
#define MIU_TA_CTL_WRITE_ENABLE (MIU_TA_CTL_WRITE | MIU_TA_CTL_ENABLE)
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 822d22336e15..2bbf0bff0da0 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -397,7 +397,6 @@ static void qla_init_base_qpair(struct scsi_qla_host *vha, struct req_que *req,
ha->base_qpair->use_shadow_reg = IS_SHADOW_REG_CAPABLE(ha) ? 1 : 0;
ha->base_qpair->msix = &ha->msix_entries[QLA_MSIX_RSP_Q];
INIT_LIST_HEAD(&ha->base_qpair->hints_list);
- INIT_LIST_HEAD(&ha->base_qpair->nvme_done_list);
ha->base_qpair->enable_class_2 = ql2xenableclass2;
/* init qpair to this cpu. Will adjust at run time. */
qla_cpu_update(rsp->qpair, raw_smp_processor_id());
@@ -496,7 +495,7 @@ static void qla2x00_free_rsp_que(struct qla_hw_data *ha, struct rsp_que *rsp)
return;
if (IS_QLAFX00(ha)) {
- if (rsp && rsp->ring)
+ if (rsp && rsp->ring_fx00)
dma_free_coherent(&ha->pdev->dev,
(rsp->length_fx00 + 1) * sizeof(request_t),
rsp->ring_fx00, rsp->dma_fx00);
@@ -1744,7 +1743,7 @@ __qla2x00_abort_all_cmds(struct qla_qpair *qp, int res)
sp_get(sp);
spin_unlock_irqrestore(qp->qp_lock_ptr,
flags);
- qla_nvme_abort(ha, sp);
+ qla_nvme_abort(ha, sp, res);
spin_lock_irqsave(qp->qp_lock_ptr,
flags);
} else if (GET_CMD_SP(sp) &&
@@ -4822,12 +4821,14 @@ void qla24xx_create_new_sess(struct scsi_qla_host *vha, struct qla_work_evt *e)
fcport->d_id = e->u.new_sess.id;
fcport->flags |= FCF_FABRIC_DEVICE;
fcport->fw_login_state = DSC_LS_PLOGI_PEND;
- if (e->u.new_sess.fc4_type == FC4_TYPE_FCP_SCSI) {
+ if (e->u.new_sess.fc4_type & FS_FC4TYPE_FCP)
fcport->fc4_type = FC4_TYPE_FCP_SCSI;
- } else if (e->u.new_sess.fc4_type == FC4_TYPE_NVME) {
+
+ if (e->u.new_sess.fc4_type & FS_FC4TYPE_NVME) {
fcport->fc4_type = FC4_TYPE_OTHER;
fcport->fc4f_nvme = FC4_TYPE_NVME;
}
+
memcpy(fcport->port_name, e->u.new_sess.port_name,
WWN_SIZE);
} else {
@@ -5047,7 +5048,8 @@ qla2x00_do_work(struct scsi_qla_host *vha)
e->u.logio.data);
break;
case QLA_EVT_GPNFT:
- qla24xx_async_gpnft(vha, e->u.gpnft.fc4_type);
+ qla24xx_async_gpnft(vha, e->u.gpnft.fc4_type,
+ e->u.gpnft.sp);
break;
case QLA_EVT_GPNFT_DONE:
qla24xx_async_gpnft_done(vha, e->u.iosb.sp);
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index d2db86ea06b2..04458eb19d38 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -2226,6 +2226,7 @@ qla2x00_erase_flash_sector(struct qla_hw_data *ha, uint32_t addr,
/**
* qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip.
+ * @ha:
* @man_id: Flash manufacturer ID
* @flash_id: Flash ID
*/
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index b49ac85f3de2..5546ac9c3d9d 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -961,7 +961,7 @@ qlt_send_first_logo(struct scsi_qla_host *vha, qlt_port_logo_t *logo)
logo->cmd_count, res);
}
-static void qlt_free_session_done(struct work_struct *work)
+void qlt_free_session_done(struct work_struct *work)
{
struct fc_port *sess = container_of(work, struct fc_port,
free_work);
@@ -1169,11 +1169,14 @@ void qlt_unreg_sess(struct fc_port *sess)
sess->last_rscn_gen = sess->rscn_gen;
sess->last_login_gen = sess->login_gen;
- if (sess->nvme_flag & NVME_FLAG_REGISTERED)
+ if (sess->nvme_flag & NVME_FLAG_REGISTERED &&
+ !(sess->nvme_flag & NVME_FLAG_DELETING)) {
+ sess->nvme_flag |= NVME_FLAG_DELETING;
schedule_work(&sess->nvme_del_work);
-
- INIT_WORK(&sess->free_work, qlt_free_session_done);
- schedule_work(&sess->free_work);
+ } else {
+ INIT_WORK(&sess->free_work, qlt_free_session_done);
+ schedule_work(&sess->free_work);
+ }
}
EXPORT_SYMBOL(qlt_unreg_sess);
@@ -2023,7 +2026,7 @@ static void qlt_24xx_handle_abts(struct scsi_qla_host *vha,
sess = ha->tgt.tgt_ops->find_sess_by_s_id(vha, s_id);
if (!sess) {
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf012,
- "qla_target(%d): task abort for non-existant session\n",
+ "qla_target(%d): task abort for non-existent session\n",
vha->vp_idx);
spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);
@@ -2866,7 +2869,6 @@ qlt_build_ctio_crc2_pkt(struct qla_qpair *qpair, struct qla_tgt_prm *prm)
uint32_t data_bytes;
uint32_t dif_bytes;
uint8_t bundling = 1;
- uint8_t *clr_ptr;
struct crc_context *crc_ctx_pkt = NULL;
struct qla_hw_data *ha;
struct ctio_crc2_to_fw *pkt;
@@ -2995,15 +2997,11 @@ qlt_build_ctio_crc2_pkt(struct qla_qpair *qpair, struct qla_tgt_prm *prm)
/* Allocate CRC context from global pool */
crc_ctx_pkt = cmd->ctx =
- dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC, &crc_ctx_dma);
+ dma_pool_zalloc(ha->dl_dma_pool, GFP_ATOMIC, &crc_ctx_dma);
if (!crc_ctx_pkt)
goto crc_queuing_error;
- /* Zero out CTX area. */
- clr_ptr = (uint8_t *)crc_ctx_pkt;
- memset(clr_ptr, 0, sizeof(*crc_ctx_pkt));
-
crc_ctx_pkt->crc_ctx_dma = crc_ctx_dma;
INIT_LIST_HEAD(&crc_ctx_pkt->dsd_list);
@@ -6292,10 +6290,11 @@ static void qlt_lport_dump(struct scsi_qla_host *vha, u64 wwpn,
/**
* qla_tgt_lport_register - register lport with external module
*
- * @qla_tgt_ops: Pointer for tcm_qla2xxx qla_tgt_ops
- * @wwpn: Passwd FC target WWPN
- * @callback: lport initialization callback for tcm_qla2xxx code
* @target_lport_ptr: pointer for tcm_qla2xxx specific lport data
+ * @phys_wwpn:
+ * @npiv_wwpn:
+ * @npiv_wwnn:
+ * @callback: lport initialization callback for tcm_qla2xxx code
*/
int qlt_lport_register(void *target_lport_ptr, u64 phys_wwpn,
u64 npiv_wwpn, u64 npiv_wwnn,
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index bb67b5a284a8..728ce74358e7 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -1016,7 +1016,7 @@ extern void qlt_fc_port_deleted(struct scsi_qla_host *, fc_port_t *, int);
extern int __init qlt_init(void);
extern void qlt_exit(void);
extern void qlt_update_vp_map(struct scsi_qla_host *, int);
-
+extern void qlt_free_session_done(struct work_struct *);
/*
* This macro is used during early initializations when host->active_mode
* is not set. Right now, ha value is ignored.
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 549bef9afddd..0c55d7057280 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "10.00.00.05-k"
+#define QLA2XXX_VERSION "10.00.00.06-k"
#define QLA_DRIVER_MAJOR_VER 10
#define QLA_DRIVER_MINOR_VER 0
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index bda2e64ee5ca..5d56904687b9 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -1584,12 +1584,11 @@ int qla4xxx_get_chap(struct scsi_qla_host *ha, char *username, char *password,
struct ql4_chap_table *chap_table;
dma_addr_t chap_dma;
- chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma);
+ chap_table = dma_pool_zalloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma);
if (chap_table == NULL)
return -ENOMEM;
chap_size = sizeof(struct ql4_chap_table);
- memset(chap_table, 0, chap_size);
if (is_qla40XX(ha))
offset = FLASH_CHAP_OFFSET | (idx * chap_size);
@@ -1648,13 +1647,12 @@ int qla4xxx_set_chap(struct scsi_qla_host *ha, char *username, char *password,
uint32_t chap_size = 0;
dma_addr_t chap_dma;
- chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma);
+ chap_table = dma_pool_zalloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma);
if (chap_table == NULL) {
ret = -ENOMEM;
goto exit_set_chap;
}
- memset(chap_table, 0, sizeof(struct ql4_chap_table));
if (bidi)
chap_table->flags |= BIT_6; /* peer */
else
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index 968bd85610f8..43f73583ef5c 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -45,6 +45,8 @@ qla4_8xxx_pci_base_offsetfset(struct scsi_qla_host *ha, unsigned long off)
return NULL;
}
+static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8,
+ 0x410000AC, 0x410000B8, 0x410000BC };
#define MAX_CRB_XFORM 60
static unsigned long crb_addr_xform[MAX_CRB_XFORM];
static int qla4_8xxx_crb_table_initialized;
diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h
index 337d9fcf6417..98fe78613eb7 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.h
+++ b/drivers/scsi/qla4xxx/ql4_nx.h
@@ -1022,11 +1022,4 @@ struct qla8xxx_minidump_entry_queue {
#define MD_MIU_TEST_AGT_WRDATA_ULO 0x410000B0
#define MD_MIU_TEST_AGT_WRDATA_UHI 0x410000B4
-#define MD_MIU_TEST_AGT_RDDATA_LO 0x410000A8
-#define MD_MIU_TEST_AGT_RDDATA_HI 0x410000AC
-#define MD_MIU_TEST_AGT_RDDATA_ULO 0x410000B8
-#define MD_MIU_TEST_AGT_RDDATA_UHI 0x410000BC
-
-static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8,
- 0x410000AC, 0x410000B8, 0x410000BC };
#endif
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index fc2c97d9a0d6..94c14ce94da2 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -843,12 +843,10 @@ static int qla4xxx_delete_chap(struct Scsi_Host *shost, uint16_t chap_tbl_idx)
uint32_t chap_size;
int ret = 0;
- chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma);
+ chap_table = dma_pool_zalloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma);
if (chap_table == NULL)
return -ENOMEM;
- memset(chap_table, 0, sizeof(struct ql4_chap_table));
-
if (is_qla80XX(ha))
max_chap_entries = (ha->hw.flt_chap_size / 2) /
sizeof(struct ql4_chap_table);
diff --git a/drivers/scsi/raid_class.c b/drivers/scsi/raid_class.c
index 2c146b44d95f..ea88906d2cc5 100644
--- a/drivers/scsi/raid_class.c
+++ b/drivers/scsi/raid_class.c
@@ -157,6 +157,7 @@ static struct {
{ RAID_LEVEL_5, "raid5" },
{ RAID_LEVEL_50, "raid50" },
{ RAID_LEVEL_6, "raid6" },
+ { RAID_LEVEL_JBOD, "jbod" },
};
static const char *raid_level_name(enum raid_level level)
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index a7e4fba724b7..4c60c260c5da 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -231,7 +231,7 @@ void scsi_finish_command(struct scsi_cmnd *cmd)
"(result %x)\n", cmd->result));
good_bytes = scsi_bufflen(cmd);
- if (!blk_rq_is_passthrough(cmd->request)) {
+ if (!blk_rq_is_passthrough(cmd->request)) {
int old_good_bytes = good_bytes;
drv = scsi_cmd_to_driver(cmd);
if (drv->done)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 1cb353f18d08..9ef5e3b810f6 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -6,7 +6,7 @@
* anything out of the ordinary is seen.
* ^^^^^^^^^^^^^^^^^^^^^^^ Original ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
*
- * Copyright (C) 2001 - 2017 Douglas Gilbert
+ * Copyright (C) 2001 - 2018 Douglas Gilbert
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -61,8 +61,8 @@
#include "scsi_logging.h"
/* make sure inq_product_rev string corresponds to this version */
-#define SDEBUG_VERSION "0187" /* format to fit INQUIRY revision field */
-static const char *sdebug_version_date = "20171202";
+#define SDEBUG_VERSION "0188" /* format to fit INQUIRY revision field */
+static const char *sdebug_version_date = "20180128";
#define MY_NAME "scsi_debug"
@@ -234,6 +234,7 @@ static const char *sdebug_version_date = "20171202";
#define F_INV_OP 0x200
#define F_FAKE_RW 0x400
#define F_M_ACCESS 0x800 /* media access */
+#define F_LONG_DELAY 0x1000
#define FF_RESPOND (F_RL_WLUN_OK | F_SKIP_UA | F_DELAY_OVERR)
#define FF_MEDIA_IO (F_M_ACCESS | F_FAKE_RW)
@@ -349,7 +350,7 @@ enum sdeb_opcode_index {
SDEB_I_XDWRITEREAD = 25, /* 10 only */
SDEB_I_WRITE_BUFFER = 26,
SDEB_I_WRITE_SAME = 27, /* 10, 16 */
- SDEB_I_SYNC_CACHE = 28, /* 10 only */
+ SDEB_I_SYNC_CACHE = 28, /* 10, 16 */
SDEB_I_COMP_WRITE = 29,
SDEB_I_LAST_ELEMENT = 30, /* keep this last (previous + 1) */
};
@@ -382,7 +383,7 @@ static const unsigned char opcode_ind_arr[256] = {
/* 0x80; 0x80->0x9f: 16 byte cdbs */
0, 0, 0, 0, 0, SDEB_I_ATA_PT, 0, 0,
SDEB_I_READ, SDEB_I_COMP_WRITE, SDEB_I_WRITE, 0, 0, 0, 0, 0,
- 0, 0, 0, SDEB_I_WRITE_SAME, 0, 0, 0, 0,
+ 0, SDEB_I_SYNC_CACHE, 0, SDEB_I_WRITE_SAME, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, SDEB_I_SERV_ACT_IN_16, SDEB_I_SERV_ACT_OUT_16,
/* 0xa0; 0xa0->0xbf: 12 byte cdbs */
SDEB_I_REPORT_LUNS, SDEB_I_ATA_PT, 0, SDEB_I_MAINT_IN,
@@ -398,6 +399,14 @@ static const unsigned char opcode_ind_arr[256] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
};
+/*
+ * The following "response" functions return the SCSI mid-level's 4 byte
+ * tuple-in-an-int. To handle commands with an IMMED bit, for a faster
+ * command completion, they can mask their return value with
+ * SDEG_RES_IMMED_MASK .
+ */
+#define SDEG_RES_IMMED_MASK 0x40000000
+
static int resp_inquiry(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_report_luns(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_requests(struct scsi_cmnd *, struct sdebug_dev_info *);
@@ -420,6 +429,7 @@ static int resp_write_same_16(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_xdwriteread_10(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_comp_write(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_write_buffer(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_sync_cache(struct scsi_cmnd *, struct sdebug_dev_info *);
/*
* The following are overflow arrays for cdbs that "hit" the same index in
@@ -499,6 +509,12 @@ static const struct opcode_info_t release_iarr[] = {
{6, 0x1f, 0xff, 0, 0, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
};
+static const struct opcode_info_t sync_cache_iarr[] = {
+ {0, 0x91, 0, F_LONG_DELAY | F_M_ACCESS, resp_sync_cache, NULL,
+ {16, 0x6, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0x3f, 0xc7} }, /* SYNC_CACHE (16) */
+};
+
/* This array is accessed via SDEB_I_* values. Make sure all are mapped,
* plus the terminating elements for logic that scans this table such as
@@ -536,8 +552,8 @@ static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = {
{ARRAY_SIZE(write_iarr), 0x8a, 0, F_D_OUT | FF_MEDIA_IO,
resp_write_dt0, write_iarr, /* WRITE(16) */
{16, 0xfa, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xc7} }, /* WRITE(16) */
- {0, 0x1b, 0, 0, resp_start_stop, NULL, /* START STOP UNIT */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xc7} },
+ {0, 0x1b, 0, F_LONG_DELAY, resp_start_stop, NULL,/* START STOP UNIT */
{6, 0x1, 0, 0xf, 0xf7, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{ARRAY_SIZE(sa_in_16_iarr), 0x9e, 0x10, F_SA_LOW | F_D_IN,
resp_readcap16, sa_in_16_iarr, /* SA_IN(16), READ CAPACITY(16) */
@@ -590,9 +606,10 @@ static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = {
resp_write_same_10, write_same_iarr, /* WRITE SAME(10) */
{10, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0xff, 0xff, 0xc7, 0,
0, 0, 0, 0, 0} },
- {0, 0x35, 0, F_DELAY_OVERR | FF_MEDIA_IO, NULL, NULL, /* SYNC_CACHE */
+ {ARRAY_SIZE(sync_cache_iarr), 0x35, 0, F_LONG_DELAY | F_M_ACCESS,
+ resp_sync_cache, sync_cache_iarr,
{10, 0x7, 0xff, 0xff, 0xff, 0xff, 0x3f, 0xff, 0xff, 0xc7, 0, 0,
- 0, 0, 0, 0} },
+ 0, 0, 0, 0} }, /* SYNC_CACHE (10) */
{0, 0x89, 0, F_D_OUT | FF_MEDIA_IO, resp_comp_write, NULL,
{16, 0xf8, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0, 0,
0, 0xff, 0x3f, 0xc7} }, /* COMPARE AND WRITE */
@@ -616,6 +633,8 @@ static unsigned int sdebug_guard = DEF_GUARD;
static int sdebug_lowest_aligned = DEF_LOWEST_ALIGNED;
static int sdebug_max_luns = DEF_MAX_LUNS;
static int sdebug_max_queue = SDEBUG_CANQUEUE; /* per submit queue */
+static unsigned int sdebug_medium_error_start = OPT_MEDIUM_ERR_ADDR;
+static int sdebug_medium_error_count = OPT_MEDIUM_ERR_NUM;
static atomic_t retired_max_queue; /* if > 0 then was prior max_queue */
static int sdebug_ndelay = DEF_NDELAY; /* if > 0 then unit is nanoseconds */
static int sdebug_no_lun_0 = DEF_NO_LUN_0;
@@ -649,7 +668,6 @@ static bool sdebug_any_injecting_opt;
static bool sdebug_verbose;
static bool have_dif_prot;
static bool sdebug_statistics = DEF_STATISTICS;
-static bool sdebug_mq_active;
static unsigned int sdebug_store_sectors;
static sector_t sdebug_capacity; /* in sectors */
@@ -1155,8 +1173,8 @@ static int inquiry_vpd_84(unsigned char *arr)
static int inquiry_vpd_85(unsigned char *arr)
{
int num = 0;
- const char * na1 = "https://www.kernel.org/config";
- const char * na2 = "http://www.kernel.org/log";
+ const char *na1 = "https://www.kernel.org/config";
+ const char *na2 = "http://www.kernel.org/log";
int plen, olen;
arr[num++] = 0x1; /* lu, storage config */
@@ -1372,7 +1390,7 @@ static int inquiry_vpd_b2(unsigned char *arr)
static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
unsigned char pq_pdt;
- unsigned char * arr;
+ unsigned char *arr;
unsigned char *cmd = scp->cmnd;
int alloc_len, n, ret;
bool have_wlun, is_disk;
@@ -1523,10 +1541,10 @@ static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
static unsigned char iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0,
0, 0, 0x0, 0x0};
-static int resp_requests(struct scsi_cmnd * scp,
- struct sdebug_dev_info * devip)
+static int resp_requests(struct scsi_cmnd *scp,
+ struct sdebug_dev_info *devip)
{
- unsigned char * sbuff;
+ unsigned char *sbuff;
unsigned char *cmd = scp->cmnd;
unsigned char arr[SCSI_SENSE_BUFFERSIZE];
bool dsense;
@@ -1584,8 +1602,8 @@ static int resp_requests(struct scsi_cmnd * scp,
return fill_from_dev_buffer(scp, arr, len);
}
-static int resp_start_stop(struct scsi_cmnd * scp,
- struct sdebug_dev_info * devip)
+static int resp_start_stop(struct scsi_cmnd *scp,
+ struct sdebug_dev_info *devip)
{
unsigned char *cmd = scp->cmnd;
int power_cond, stop;
@@ -1597,7 +1615,7 @@ static int resp_start_stop(struct scsi_cmnd * scp,
}
stop = !(cmd[4] & 1);
atomic_xchg(&devip->stopped, stop);
- return 0;
+ return (cmd[1] & 0x1) ? SDEG_RES_IMMED_MASK : 0; /* check IMMED bit */
}
static sector_t get_sdebug_capacity(void)
@@ -1612,8 +1630,8 @@ static sector_t get_sdebug_capacity(void)
}
#define SDEBUG_READCAP_ARR_SZ 8
-static int resp_readcap(struct scsi_cmnd * scp,
- struct sdebug_dev_info * devip)
+static int resp_readcap(struct scsi_cmnd *scp,
+ struct sdebug_dev_info *devip)
{
unsigned char arr[SDEBUG_READCAP_ARR_SZ];
unsigned int capac;
@@ -1631,8 +1649,8 @@ static int resp_readcap(struct scsi_cmnd * scp,
}
#define SDEBUG_READCAP16_ARR_SZ 32
-static int resp_readcap16(struct scsi_cmnd * scp,
- struct sdebug_dev_info * devip)
+static int resp_readcap16(struct scsi_cmnd *scp,
+ struct sdebug_dev_info *devip)
{
unsigned char *cmd = scp->cmnd;
unsigned char arr[SDEBUG_READCAP16_ARR_SZ];
@@ -1670,11 +1688,11 @@ static int resp_readcap16(struct scsi_cmnd * scp,
#define SDEBUG_MAX_TGTPGS_ARR_SZ 1412
-static int resp_report_tgtpgs(struct scsi_cmnd * scp,
- struct sdebug_dev_info * devip)
+static int resp_report_tgtpgs(struct scsi_cmnd *scp,
+ struct sdebug_dev_info *devip)
{
unsigned char *cmd = scp->cmnd;
- unsigned char * arr;
+ unsigned char *arr;
int host_no = devip->sdbg_host->shost->host_no;
int n, ret, alen, rlen;
int port_group_a, port_group_b, port_a, port_b;
@@ -1926,7 +1944,7 @@ static int resp_rsup_tmfs(struct scsi_cmnd *scp,
/* <<Following mode page info copied from ST318451LW>> */
-static int resp_err_recov_pg(unsigned char * p, int pcontrol, int target)
+static int resp_err_recov_pg(unsigned char *p, int pcontrol, int target)
{ /* Read-Write Error Recovery page for mode_sense */
unsigned char err_recov_pg[] = {0x1, 0xa, 0xc0, 11, 240, 0, 0, 0,
5, 0, 0xff, 0xff};
@@ -1937,7 +1955,7 @@ static int resp_err_recov_pg(unsigned char * p, int pcontrol, int target)
return sizeof(err_recov_pg);
}
-static int resp_disconnect_pg(unsigned char * p, int pcontrol, int target)
+static int resp_disconnect_pg(unsigned char *p, int pcontrol, int target)
{ /* Disconnect-Reconnect page for mode_sense */
unsigned char disconnect_pg[] = {0x2, 0xe, 128, 128, 0, 10, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0};
@@ -1948,7 +1966,7 @@ static int resp_disconnect_pg(unsigned char * p, int pcontrol, int target)
return sizeof(disconnect_pg);
}
-static int resp_format_pg(unsigned char * p, int pcontrol, int target)
+static int resp_format_pg(unsigned char *p, int pcontrol, int target)
{ /* Format device page for mode_sense */
unsigned char format_pg[] = {0x3, 0x16, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
@@ -1968,7 +1986,7 @@ static unsigned char caching_pg[] = {0x8, 18, 0x14, 0, 0xff, 0xff, 0, 0,
0xff, 0xff, 0xff, 0xff, 0x80, 0x14, 0, 0,
0, 0, 0, 0};
-static int resp_caching_pg(unsigned char * p, int pcontrol, int target)
+static int resp_caching_pg(unsigned char *p, int pcontrol, int target)
{ /* Caching page for mode_sense */
unsigned char ch_caching_pg[] = {/* 0x8, 18, */ 0x4, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
@@ -1988,7 +2006,7 @@ static int resp_caching_pg(unsigned char * p, int pcontrol, int target)
static unsigned char ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0,
0, 0, 0x2, 0x4b};
-static int resp_ctrl_m_pg(unsigned char * p, int pcontrol, int target)
+static int resp_ctrl_m_pg(unsigned char *p, int pcontrol, int target)
{ /* Control mode page for mode_sense */
unsigned char ch_ctrl_m_pg[] = {/* 0xa, 10, */ 0x6, 0, 0, 0, 0, 0,
0, 0, 0, 0};
@@ -2012,7 +2030,7 @@ static int resp_ctrl_m_pg(unsigned char * p, int pcontrol, int target)
}
-static int resp_iec_m_pg(unsigned char * p, int pcontrol, int target)
+static int resp_iec_m_pg(unsigned char *p, int pcontrol, int target)
{ /* Informational Exceptions control mode page for mode_sense */
unsigned char ch_iec_m_pg[] = {/* 0x1c, 0xa, */ 0x4, 0xf, 0, 0, 0, 0,
0, 0, 0x0, 0x0};
@@ -2027,7 +2045,7 @@ static int resp_iec_m_pg(unsigned char * p, int pcontrol, int target)
return sizeof(iec_m_pg);
}
-static int resp_sas_sf_m_pg(unsigned char * p, int pcontrol, int target)
+static int resp_sas_sf_m_pg(unsigned char *p, int pcontrol, int target)
{ /* SAS SSP mode page - short format for mode_sense */
unsigned char sas_sf_m_pg[] = {0x19, 0x6,
0x6, 0x0, 0x7, 0xd0, 0x0, 0x0};
@@ -2039,7 +2057,7 @@ static int resp_sas_sf_m_pg(unsigned char * p, int pcontrol, int target)
}
-static int resp_sas_pcd_m_spg(unsigned char * p, int pcontrol, int target,
+static int resp_sas_pcd_m_spg(unsigned char *p, int pcontrol, int target,
int target_dev_id)
{ /* SAS phy control and discover mode page for mode_sense */
unsigned char sas_pcd_m_pg[] = {0x59, 0x1, 0, 0x64, 0, 0x6, 0, 2,
@@ -2072,7 +2090,7 @@ static int resp_sas_pcd_m_spg(unsigned char * p, int pcontrol, int target,
return sizeof(sas_pcd_m_pg);
}
-static int resp_sas_sha_m_spg(unsigned char * p, int pcontrol)
+static int resp_sas_sha_m_spg(unsigned char *p, int pcontrol)
{ /* SAS SSP shared protocol specific port mode subpage */
unsigned char sas_sha_m_pg[] = {0x59, 0x2, 0, 0xc, 0, 0x6, 0x10, 0,
0, 0, 0, 0, 0, 0, 0, 0,
@@ -2093,7 +2111,7 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
unsigned char dev_spec;
int alloc_len, offset, len, target_dev_id;
int target = scp->device->id;
- unsigned char * ap;
+ unsigned char *ap;
unsigned char arr[SDEBUG_MAX_MSENSE_SZ];
unsigned char *cmd = scp->cmnd;
bool dbd, llbaa, msense_6, is_disk, bad_pcode;
@@ -2324,7 +2342,7 @@ set_mode_changed_ua:
return 0;
}
-static int resp_temp_l_pg(unsigned char * arr)
+static int resp_temp_l_pg(unsigned char *arr)
{
unsigned char temp_l_pg[] = {0x0, 0x0, 0x3, 0x2, 0x0, 38,
0x0, 0x1, 0x3, 0x2, 0x0, 65,
@@ -2334,7 +2352,7 @@ static int resp_temp_l_pg(unsigned char * arr)
return sizeof(temp_l_pg);
}
-static int resp_ie_l_pg(unsigned char * arr)
+static int resp_ie_l_pg(unsigned char *arr)
{
unsigned char ie_l_pg[] = {0x0, 0x0, 0x3, 0x3, 0x0, 0x0, 38,
};
@@ -2712,8 +2730,8 @@ static int resp_read_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
}
if (unlikely((SDEBUG_OPT_MEDIUM_ERR & sdebug_opts) &&
- (lba <= (OPT_MEDIUM_ERR_ADDR + OPT_MEDIUM_ERR_NUM - 1)) &&
- ((lba + num) > OPT_MEDIUM_ERR_ADDR))) {
+ (lba <= (sdebug_medium_error_start + sdebug_medium_error_count - 1)) &&
+ ((lba + num) > sdebug_medium_error_start))) {
/* claim unrecoverable read error */
mk_sense_buffer(scp, MEDIUM_ERROR, UNRECOVERED_READ_ERR, 0);
/* set info field and valid bit for fixed descriptor */
@@ -3562,6 +3580,27 @@ static int resp_get_lba_status(struct scsi_cmnd *scp,
return fill_from_dev_buffer(scp, arr, SDEBUG_GET_LBA_STATUS_LEN);
}
+static int resp_sync_cache(struct scsi_cmnd *scp,
+ struct sdebug_dev_info *devip)
+{
+ u64 lba;
+ u32 num_blocks;
+ u8 *cmd = scp->cmnd;
+
+ if (cmd[0] == SYNCHRONIZE_CACHE) { /* 10 byte cdb */
+ lba = get_unaligned_be32(cmd + 2);
+ num_blocks = get_unaligned_be16(cmd + 7);
+ } else { /* SYNCHRONIZE_CACHE(16) */
+ lba = get_unaligned_be64(cmd + 2);
+ num_blocks = get_unaligned_be32(cmd + 10);
+ }
+ if (lba + num_blocks > sdebug_capacity) {
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, LBA_OUT_OF_RANGE, 0);
+ return check_condition_result;
+ }
+ return (cmd[1] & 0x2) ? SDEG_RES_IMMED_MASK : 0; /* check IMMED bit */
+}
+
#define RL_BUCKET_ELEMS 8
/* Even though each pseudo target has a REPORT LUNS "well known logical unit"
@@ -3727,20 +3766,13 @@ static int resp_xdwriteread_10(struct scsi_cmnd *scp,
static struct sdebug_queue *get_queue(struct scsi_cmnd *cmnd)
{
- struct sdebug_queue *sqp = sdebug_q_arr;
+ u32 tag = blk_mq_unique_tag(cmnd->request);
+ u16 hwq = blk_mq_unique_tag_to_hwq(tag);
- if (sdebug_mq_active) {
- u32 tag = blk_mq_unique_tag(cmnd->request);
- u16 hwq = blk_mq_unique_tag_to_hwq(tag);
-
- if (unlikely(hwq >= submit_queues)) {
- pr_warn("Unexpected hwq=%d, apply modulo\n", hwq);
- hwq %= submit_queues;
- }
- pr_debug("tag=%u, hwq=%d\n", tag, hwq);
- return sqp + hwq;
- } else
- return sqp;
+ pr_debug("tag=%#x, hwq=%d\n", tag, hwq);
+ if (WARN_ON_ONCE(hwq >= submit_queues))
+ hwq = 0;
+ return sdebug_q_arr + hwq;
}
/* Queued (deferred) command completions converge here. */
@@ -4066,7 +4098,7 @@ static int scsi_debug_abort(struct scsi_cmnd *SCpnt)
return SUCCESS;
}
-static int scsi_debug_device_reset(struct scsi_cmnd * SCpnt)
+static int scsi_debug_device_reset(struct scsi_cmnd *SCpnt)
{
++num_dev_resets;
if (SCpnt && SCpnt->device) {
@@ -4118,7 +4150,7 @@ lie:
return SUCCESS;
}
-static int scsi_debug_bus_reset(struct scsi_cmnd * SCpnt)
+static int scsi_debug_bus_reset(struct scsi_cmnd *SCpnt)
{
struct sdebug_host_info *sdbg_host;
struct sdebug_dev_info *devip;
@@ -4151,9 +4183,9 @@ lie:
return SUCCESS;
}
-static int scsi_debug_host_reset(struct scsi_cmnd * SCpnt)
+static int scsi_debug_host_reset(struct scsi_cmnd *SCpnt)
{
- struct sdebug_host_info * sdbg_host;
+ struct sdebug_host_info *sdbg_host;
struct sdebug_dev_info *devip;
int k = 0;
@@ -4179,7 +4211,7 @@ static int scsi_debug_host_reset(struct scsi_cmnd * SCpnt)
static void __init sdebug_build_parts(unsigned char *ramp,
unsigned long store_size)
{
- struct partition * pp;
+ struct partition *pp;
int starts[SDEBUG_MAX_PARTS + 2];
int sectors_per_part, num_sectors, k;
int heads_by_sects, start_sec, end_sec;
@@ -4262,8 +4294,13 @@ static void clear_queue_stats(void)
static void setup_inject(struct sdebug_queue *sqp,
struct sdebug_queued_cmd *sqcp)
{
- if ((atomic_read(&sdebug_cmnd_count) % abs(sdebug_every_nth)) > 0)
+ if ((atomic_read(&sdebug_cmnd_count) % abs(sdebug_every_nth)) > 0) {
+ if (sdebug_every_nth > 0)
+ sqcp->inj_recovered = sqcp->inj_transport
+ = sqcp->inj_dif
+ = sqcp->inj_dix = sqcp->inj_short = 0;
return;
+ }
sqcp->inj_recovered = !!(SDEBUG_OPT_RECOVERED_ERR & sdebug_opts);
sqcp->inj_transport = !!(SDEBUG_OPT_TRANSPORT_ERR & sdebug_opts);
sqcp->inj_dif = !!(SDEBUG_OPT_DIF_ERR & sdebug_opts);
@@ -4278,7 +4315,10 @@ static void setup_inject(struct sdebug_queue *sqp,
* SCSI_MLQUEUE_HOST_BUSY if temporarily out of resources.
*/
static int schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip,
- int scsi_result, int delta_jiff, int ndelay)
+ int scsi_result,
+ int (*pfp)(struct scsi_cmnd *,
+ struct sdebug_dev_info *),
+ int delta_jiff, int ndelay)
{
unsigned long iflags;
int k, num_in_q, qdepth, inject;
@@ -4294,9 +4334,6 @@ static int schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip,
}
sdp = cmnd->device;
- if (unlikely(sdebug_verbose && scsi_result))
- sdev_printk(KERN_INFO, sdp, "%s: non-zero result=0x%x\n",
- __func__, scsi_result);
if (delta_jiff == 0)
goto respond_in_thread;
@@ -4351,7 +4388,6 @@ static int schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip,
sqcp = &sqp->qc_arr[k];
sqcp->a_cmnd = cmnd;
cmnd->host_scribble = (unsigned char *)sqcp;
- cmnd->result = scsi_result;
sd_dp = sqcp->sd_dp;
spin_unlock_irqrestore(&sqp->qc_lock, iflags);
if (unlikely(sdebug_every_nth && sdebug_any_injecting_opt))
@@ -4361,6 +4397,22 @@ static int schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip,
if (sd_dp == NULL)
return SCSI_MLQUEUE_HOST_BUSY;
}
+
+ cmnd->result = pfp != NULL ? pfp(cmnd, devip) : 0;
+ if (cmnd->result & SDEG_RES_IMMED_MASK) {
+ /*
+ * This is the F_DELAY_OVERR case. No delay.
+ */
+ cmnd->result &= ~SDEG_RES_IMMED_MASK;
+ delta_jiff = ndelay = 0;
+ }
+ if (cmnd->result == 0 && scsi_result != 0)
+ cmnd->result = scsi_result;
+
+ if (unlikely(sdebug_verbose && cmnd->result))
+ sdev_printk(KERN_INFO, sdp, "%s: non-zero result=0x%x\n",
+ __func__, cmnd->result);
+
if (delta_jiff > 0 || ndelay > 0) {
ktime_t kt;
@@ -4403,7 +4455,10 @@ static int schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip,
return 0;
respond_in_thread: /* call back to mid-layer using invocation thread */
- cmnd->result = scsi_result;
+ cmnd->result = pfp != NULL ? pfp(cmnd, devip) : 0;
+ cmnd->result &= ~SDEG_RES_IMMED_MASK;
+ if (cmnd->result == 0 && scsi_result != 0)
+ cmnd->result = scsi_result;
cmnd->scsi_done(cmnd);
return 0;
}
@@ -4440,6 +4495,8 @@ module_param_named(lbprz, sdebug_lbprz, int, S_IRUGO);
module_param_named(lowest_aligned, sdebug_lowest_aligned, int, S_IRUGO);
module_param_named(max_luns, sdebug_max_luns, int, S_IRUGO | S_IWUSR);
module_param_named(max_queue, sdebug_max_queue, int, S_IRUGO | S_IWUSR);
+module_param_named(medium_error_start, sdebug_medium_error_start, int, S_IRUGO | S_IWUSR);
+module_param_named(medium_error_count, sdebug_medium_error_count, int, S_IRUGO | S_IWUSR);
module_param_named(ndelay, sdebug_ndelay, int, S_IRUGO | S_IWUSR);
module_param_named(no_lun_0, sdebug_no_lun_0, int, S_IRUGO | S_IWUSR);
module_param_named(no_uld, sdebug_no_uld, int, S_IRUGO);
@@ -4497,6 +4554,8 @@ MODULE_PARM_DESC(lbprz,
MODULE_PARM_DESC(lowest_aligned, "lowest aligned lba (def=0)");
MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)");
MODULE_PARM_DESC(max_queue, "max number of queued commands (1 to max(def))");
+MODULE_PARM_DESC(medium_error_start, "starting sector number to return MEDIUM error");
+MODULE_PARM_DESC(medium_error_count, "count of sectors to return follow on MEDIUM error");
MODULE_PARM_DESC(ndelay, "response delay in nanoseconds (def=0 -> ignore)");
MODULE_PARM_DESC(no_lun_0, "no LU number 0 (def=0 -> have lun 0)");
MODULE_PARM_DESC(no_uld, "stop ULD (e.g. sd driver) attaching (def=0))");
@@ -4526,7 +4585,7 @@ MODULE_PARM_DESC(write_same_length, "Maximum blocks per WRITE SAME cmd (def=0xff
#define SDEBUG_INFO_LEN 256
static char sdebug_info[SDEBUG_INFO_LEN];
-static const char * scsi_debug_info(struct Scsi_Host * shp)
+static const char *scsi_debug_info(struct Scsi_Host *shp)
{
int k;
@@ -4587,9 +4646,8 @@ static int scsi_debug_show_info(struct seq_file *m, struct Scsi_Host *host)
num_host_resets);
seq_printf(m, "dix_reads=%d, dix_writes=%d, dif_errors=%d\n",
dix_reads, dix_writes, dif_errors);
- seq_printf(m, "usec_in_jiffy=%lu, %s=%d, mq_active=%d\n",
- TICK_NSEC / 1000, "statistics", sdebug_statistics,
- sdebug_mq_active);
+ seq_printf(m, "usec_in_jiffy=%lu, statistics=%d\n", TICK_NSEC / 1000,
+ sdebug_statistics);
seq_printf(m, "cmnd_count=%d, completions=%d, %s=%d, a_tsf=%d\n",
atomic_read(&sdebug_cmnd_count),
atomic_read(&sdebug_completions),
@@ -5450,7 +5508,7 @@ static void __exit scsi_debug_exit(void)
device_initcall(scsi_debug_init);
module_exit(scsi_debug_exit);
-static void sdebug_release_adapter(struct device * dev)
+static void sdebug_release_adapter(struct device *dev)
{
struct sdebug_host_info *sdbg_host;
@@ -5588,6 +5646,7 @@ static int scsi_debug_queuecommand(struct Scsi_Host *shost,
struct sdebug_dev_info *devip;
u8 *cmd = scp->cmnd;
int (*r_pfp)(struct scsi_cmnd *, struct sdebug_dev_info *);
+ int (*pfp)(struct scsi_cmnd *, struct sdebug_dev_info *) = NULL;
int k, na;
int errsts = 0;
u32 flags;
@@ -5612,13 +5671,8 @@ static int scsi_debug_queuecommand(struct Scsi_Host *shost,
n += scnprintf(b + n, sb - n, "%02x ",
(u32)cmd[k]);
}
- if (sdebug_mq_active)
- sdev_printk(KERN_INFO, sdp, "%s: tag=%u, cmd %s\n",
- my_name, blk_mq_unique_tag(scp->request),
- b);
- else
- sdev_printk(KERN_INFO, sdp, "%s: cmd %s\n", my_name,
- b);
+ sdev_printk(KERN_INFO, sdp, "%s: tag=%#x, cmd %s\n", my_name,
+ blk_mq_unique_tag(scp->request), b);
}
if (fake_host_busy(scp))
return SCSI_MLQUEUE_HOST_BUSY;
@@ -5714,20 +5768,30 @@ static int scsi_debug_queuecommand(struct Scsi_Host *shost,
return 0; /* ignore command: make trouble */
}
if (likely(oip->pfp))
- errsts = oip->pfp(scp, devip); /* calls a resp_* function */
- else if (r_pfp) /* if leaf function ptr NULL, try the root's */
- errsts = r_pfp(scp, devip);
+ pfp = oip->pfp; /* calls a resp_* function */
+ else
+ pfp = r_pfp; /* if leaf function ptr NULL, try the root's */
fini:
if (F_DELAY_OVERR & flags)
- return schedule_resp(scp, devip, errsts, 0, 0);
- else
- return schedule_resp(scp, devip, errsts, sdebug_jdelay,
+ return schedule_resp(scp, devip, errsts, pfp, 0, 0);
+ else if ((sdebug_jdelay || sdebug_ndelay) && (flags & F_LONG_DELAY)) {
+ /*
+ * If any delay is active, want F_LONG_DELAY to be at least 1
+ * second and if sdebug_jdelay>0 want a long delay of that
+ * many seconds.
+ */
+ int jdelay = (sdebug_jdelay < 2) ? 1 : sdebug_jdelay;
+
+ jdelay = mult_frac(USER_HZ * jdelay, HZ, USER_HZ);
+ return schedule_resp(scp, devip, errsts, pfp, jdelay, 0);
+ } else
+ return schedule_resp(scp, devip, errsts, pfp, sdebug_jdelay,
sdebug_ndelay);
check_cond:
- return schedule_resp(scp, devip, check_condition_result, 0, 0);
+ return schedule_resp(scp, devip, check_condition_result, NULL, 0, 0);
err_out:
- return schedule_resp(scp, NULL, DID_NO_CONNECT << 16, 0, 0);
+ return schedule_resp(scp, NULL, DID_NO_CONNECT << 16, NULL, 0, 0);
}
static struct scsi_host_template sdebug_driver_template = {
@@ -5757,7 +5821,7 @@ static struct scsi_host_template sdebug_driver_template = {
.track_queue_depth = 1,
};
-static int sdebug_driver_probe(struct device * dev)
+static int sdebug_driver_probe(struct device *dev)
{
int error = 0;
struct sdebug_host_info *sdbg_host;
@@ -5782,8 +5846,7 @@ static int sdebug_driver_probe(struct device * dev)
}
/* Decide whether to tell scsi subsystem that we want mq */
/* Following should give the same answer for each host */
- sdebug_mq_active = shost_use_blk_mq(hpnt) && (submit_queues > 1);
- if (sdebug_mq_active)
+ if (shost_use_blk_mq(hpnt))
hpnt->nr_hw_queues = submit_queues;
sdbg_host->shost = hpnt;
@@ -5855,7 +5918,7 @@ static int sdebug_driver_probe(struct device * dev)
return error;
}
-static int sdebug_driver_remove(struct device * dev)
+static int sdebug_driver_remove(struct device *dev)
{
struct sdebug_host_info *sdbg_host;
struct sdebug_dev_info *sdbg_devinfo, *tmp;
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index f3b117246d47..e5370d718058 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -175,11 +175,6 @@ static struct {
{"HITACHI", "DISK-SUBSYSTEM", "*", BLIST_REPORTLUN2},
{"HITACHI", "HUS1530", "*", BLIST_NO_DIF},
{"HITACHI", "OPEN-", "*", BLIST_REPORTLUN2 | BLIST_TRY_VPD_PAGES},
- {"HITACHI", "OP-C-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
- {"HITACHI", "3380-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
- {"HITACHI", "3390-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
- {"HITACHI", "6586-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
- {"HITACHI", "6588-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
{"HP", "A6189A", NULL, BLIST_SPARSELUN | BLIST_LARGELUN}, /* HP VA7400 */
{"HP", "OPEN-", "*", BLIST_REPORTLUN2 | BLIST_TRY_VPD_PAGES}, /* HP XP Arrays */
{"HP", "NetRAID-4M", NULL, BLIST_FORCELUN},
@@ -187,13 +182,7 @@ static struct {
{"HP", "C1557A", NULL, BLIST_FORCELUN},
{"HP", "C3323-300", "4269", BLIST_NOTQ},
{"HP", "C5713A", NULL, BLIST_NOREPORTLUN},
- {"HP", "DF400", "*", BLIST_REPORTLUN2},
- {"HP", "DF500", "*", BLIST_REPORTLUN2},
- {"HP", "OP-C-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
- {"HP", "3380-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
- {"HP", "3390-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
- {"HP", "6586-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
- {"HP", "6588-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
+ {"HP", "DISK-SUBSYSTEM", "*", BLIST_REPORTLUN2},
{"IBM", "AuSaV1S2", NULL, BLIST_FORCELUN},
{"IBM", "ProFibre 4000R", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
{"IBM", "2105", NULL, BLIST_RETRY_HWERROR},
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index ca53a5f785ee..946039117bf4 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -117,6 +117,12 @@ static int scsi_host_eh_past_deadline(struct Scsi_Host *shost)
/**
* scmd_eh_abort_handler - Handle command aborts
* @work: command to be aborted.
+ *
+ * Note: this function must be called only for a command that has timed out.
+ * Because the block layer marks a request as complete before it calls
+ * scsi_times_out(), a .scsi_done() call from the LLD for a command that has
+ * timed out do not have any effect. Hence it is safe to call
+ * scsi_finish_command() from this function.
*/
void
scmd_eh_abort_handler(struct work_struct *work)
@@ -1889,7 +1895,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
}
return FAILED;
- maybe_retry:
+maybe_retry:
/* we requeue for retry because the error was retryable, and
* the request was not marked fast fail. Note that above,
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index ed79d3925860..0dfec0dedd5e 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -191,7 +191,19 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, bool unbusy)
*/
cmd->result = 0;
if (q->mq_ops) {
- scsi_mq_requeue_cmd(cmd);
+ /*
+ * Before a SCSI command is dispatched,
+ * get_device(&sdev->sdev_gendev) is called and the host,
+ * target and device busy counters are increased. Since
+ * requeuing a request causes these actions to be repeated and
+ * since scsi_device_unbusy() has already been called,
+ * put_device(&device->sdev_gendev) must still be called. Call
+ * put_device() after blk_mq_requeue_request() to avoid that
+ * removal of the SCSI device can start before requeueing has
+ * happened.
+ */
+ blk_mq_requeue_request(cmd->request, true);
+ put_device(&device->sdev_gendev);
return;
}
spin_lock_irqsave(q->queue_lock, flags);
@@ -858,6 +870,17 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
/* for passthrough error may be set */
error = BLK_STS_OK;
}
+ /*
+ * Another corner case: the SCSI status byte is non-zero but 'good'.
+ * Example: PRE-FETCH command returns SAM_STAT_CONDITION_MET when
+ * it is able to fit nominated LBs in its cache (and SAM_STAT_GOOD
+ * if it can't fit). Treat SAM_STAT_CONDITION_MET and the related
+ * intermediate statuses (both obsolete in SAM-4) as good.
+ */
+ if (status_byte(result) && scsi_status_is_good(result)) {
+ result = 0;
+ error = BLK_STS_OK;
+ }
/*
* special case: failed zero length commands always need to
@@ -2611,7 +2634,7 @@ scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries,
/* try to eat the UNIT_ATTENTION if there are enough retries */
do {
result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr,
- timeout, retries, NULL);
+ timeout, 1, NULL);
if (sdev->removable && scsi_sense_valid(sshdr) &&
sshdr->sense_key == UNIT_ATTENTION)
sdev->changed = 1;
diff --git a/drivers/scsi/scsi_module.c b/drivers/scsi/scsi_module.c
deleted file mode 100644
index 489175833709..000000000000
--- a/drivers/scsi/scsi_module.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 2003 Christoph Hellwig.
- * Released under GPL v2.
- *
- * Support for old-style host templates.
- *
- * NOTE: Do not use this for new drivers ever.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <scsi/scsi_host.h>
-
-
-static int __init init_this_scsi_driver(void)
-{
- struct scsi_host_template *sht = &driver_template;
- struct Scsi_Host *shost;
- struct list_head *l;
- int error;
-
- if (!sht->release) {
- printk(KERN_ERR
- "scsi HBA driver %s didn't set a release method.\n",
- sht->name);
- return -EINVAL;
- }
-
- sht->module = THIS_MODULE;
- INIT_LIST_HEAD(&sht->legacy_hosts);
-
- sht->detect(sht);
- if (list_empty(&sht->legacy_hosts))
- return -ENODEV;
-
- list_for_each_entry(shost, &sht->legacy_hosts, sht_legacy_list) {
- error = scsi_add_host(shost, NULL);
- if (error)
- goto fail;
- scsi_scan_host(shost);
- }
- return 0;
- fail:
- l = &shost->sht_legacy_list;
- while ((l = l->prev) != &sht->legacy_hosts)
- scsi_remove_host(list_entry(l, struct Scsi_Host, sht_legacy_list));
- return error;
-}
-
-static void __exit exit_this_scsi_driver(void)
-{
- struct scsi_host_template *sht = &driver_template;
- struct Scsi_Host *shost, *s;
-
- list_for_each_entry(shost, &sht->legacy_hosts, sht_legacy_list)
- scsi_remove_host(shost);
- list_for_each_entry_safe(shost, s, &sht->legacy_hosts, sht_legacy_list)
- sht->release(shost);
-
- if (list_empty(&sht->legacy_hosts))
- return;
-
- printk(KERN_WARNING "%s did not call scsi_unregister\n", sht->name);
- dump_stack();
-
- list_for_each_entry_safe(shost, s, &sht->legacy_hosts, sht_legacy_list)
- scsi_unregister(shost);
-}
-
-module_init(init_this_scsi_driver);
-module_exit(exit_this_scsi_driver);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 7142c8be1099..1e36c9a9ad17 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1309,6 +1309,13 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
}
}
+ if (sdev->host->hostt->sdev_groups) {
+ error = sysfs_create_groups(&sdev->sdev_gendev.kobj,
+ sdev->host->hostt->sdev_groups);
+ if (error)
+ return error;
+ }
+
scsi_autopm_put_device(sdev);
return error;
}
@@ -1348,6 +1355,10 @@ void __scsi_remove_device(struct scsi_device *sdev)
if (res != 0)
return;
+ if (sdev->host->hostt->sdev_groups)
+ sysfs_remove_groups(&sdev->sdev_gendev.kobj,
+ sdev->host->hostt->sdev_groups);
+
bsg_unregister_queue(sdev->request_queue);
device_unregister(&sdev->sdev_dev);
transport_remove_device(dev);
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 871ea582029e..2ca150b16764 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -822,11 +822,11 @@ spi_dv_device_get_echo_buffer(struct scsi_device *sdev, u8 *buffer)
* fails, the device won't let us write to the echo buffer
* so just return failure */
- const char spi_test_unit_ready[] = {
+ static const char spi_test_unit_ready[] = {
TEST_UNIT_READY, 0, 0, 0, 0, 0
};
- const char spi_read_buffer_descriptor[] = {
+ static const char spi_read_buffer_descriptor[] = {
READ_BUFFER, 0x0b, 0, 0, 0, 0, 0, 0, 4, 0
};
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index 89cf4498f535..41df75eea57b 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -515,7 +515,8 @@ static inline unsigned long *sd_zbc_alloc_zone_bitmap(struct scsi_disk *sdkp)
* sd_zbc_get_seq_zones - Parse report zones reply to identify sequential zones
* @sdkp: disk used
* @buf: report reply buffer
- * @seq_zone_bitamp: bitmap of sequential zones to set
+ * @buflen: length of @buf
+ * @seq_zones_bitmap: bitmap of sequential zones to set
*
* Parse reported zone descriptors in @buf to identify sequential zones and
* set the reported zone bit in @seq_zones_bitmap accordingly.
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 10c94011c8a8..592b6dbf8b35 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -40,11 +40,11 @@
#define BUILD_TIMESTAMP
#endif
-#define DRIVER_VERSION "1.1.2-126"
+#define DRIVER_VERSION "1.1.4-115"
#define DRIVER_MAJOR 1
#define DRIVER_MINOR 1
-#define DRIVER_RELEASE 2
-#define DRIVER_REVISION 126
+#define DRIVER_RELEASE 4
+#define DRIVER_REVISION 115
#define DRIVER_NAME "Microsemi PQI Driver (v" \
DRIVER_VERSION BUILD_TIMESTAMP ")"
@@ -3898,29 +3898,6 @@ static int pqi_validate_device_capability(struct pqi_ctrl_info *ctrl_info)
return 0;
}
-static int pqi_delete_operational_queue(struct pqi_ctrl_info *ctrl_info,
- bool inbound_queue, u16 queue_id)
-{
- struct pqi_general_admin_request request;
- struct pqi_general_admin_response response;
-
- memset(&request, 0, sizeof(request));
- request.header.iu_type = PQI_REQUEST_IU_GENERAL_ADMIN;
- put_unaligned_le16(PQI_GENERAL_ADMIN_IU_LENGTH,
- &request.header.iu_length);
- if (inbound_queue)
- request.function_code =
- PQI_GENERAL_ADMIN_FUNCTION_DELETE_IQ;
- else
- request.function_code =
- PQI_GENERAL_ADMIN_FUNCTION_DELETE_OQ;
- put_unaligned_le16(queue_id,
- &request.data.delete_operational_queue.queue_id);
-
- return pqi_submit_admin_request_synchronous(ctrl_info, &request,
- &response);
-}
-
static int pqi_create_event_queue(struct pqi_ctrl_info *ctrl_info)
{
int rc;
@@ -4038,7 +4015,7 @@ static int pqi_create_queue_group(struct pqi_ctrl_info *ctrl_info,
if (rc) {
dev_err(&ctrl_info->pci_dev->dev,
"error creating inbound AIO queue\n");
- goto delete_inbound_queue_raid;
+ return rc;
}
queue_group->iq_pi[AIO_PATH] = ctrl_info->iomem_base +
@@ -4066,7 +4043,7 @@ static int pqi_create_queue_group(struct pqi_ctrl_info *ctrl_info,
if (rc) {
dev_err(&ctrl_info->pci_dev->dev,
"error changing queue property\n");
- goto delete_inbound_queue_aio;
+ return rc;
}
/*
@@ -4096,7 +4073,7 @@ static int pqi_create_queue_group(struct pqi_ctrl_info *ctrl_info,
if (rc) {
dev_err(&ctrl_info->pci_dev->dev,
"error creating outbound queue\n");
- goto delete_inbound_queue_aio;
+ return rc;
}
queue_group->oq_ci = ctrl_info->iomem_base +
@@ -4105,16 +4082,6 @@ static int pqi_create_queue_group(struct pqi_ctrl_info *ctrl_info,
&response.data.create_operational_oq.oq_ci_offset);
return 0;
-
-delete_inbound_queue_aio:
- pqi_delete_operational_queue(ctrl_info, true,
- queue_group->iq_id[AIO_PATH]);
-
-delete_inbound_queue_raid:
- pqi_delete_operational_queue(ctrl_info, true,
- queue_group->iq_id[RAID_PATH]);
-
- return rc;
}
static int pqi_create_queues(struct pqi_ctrl_info *ctrl_info)
@@ -6797,6 +6764,14 @@ static __maybe_unused int pqi_resume(struct pci_dev *pci_dev)
static const struct pci_device_id pqi_pci_id_table[] = {
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x105b, 0x1211)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x105b, 0x1321)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
0x152d, 0x8a22)
},
{
@@ -6817,6 +6792,38 @@ static const struct pci_device_id pqi_pci_id_table[] = {
},
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x193d, 0x8460)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x193d, 0x8461)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x193d, 0xf460)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x193d, 0xf461)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1bd4, 0x0045)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1bd4, 0x0046)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1bd4, 0x0047)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1bd4, 0x0048)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADAPTEC2, 0x0110)
},
{
@@ -6917,6 +6924,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
},
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ PCI_VENDOR_ID_ADAPTEC2, 0x1282)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADAPTEC2, 0x1300)
},
{
diff --git a/drivers/scsi/sun3x_esp.c b/drivers/scsi/sun3x_esp.c
index d50c5ed8f428..0b1421cdf8a0 100644
--- a/drivers/scsi/sun3x_esp.c
+++ b/drivers/scsi/sun3x_esp.c
@@ -210,7 +210,7 @@ static int esp_sun3x_probe(struct platform_device *dev)
esp = shost_priv(host);
esp->host = host;
- esp->dev = dev;
+ esp->dev = &dev->dev;
esp->ops = &sun3x_esp_ops;
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c
deleted file mode 100644
index 5bdcbe8fa958..000000000000
--- a/drivers/scsi/sym53c416.c
+++ /dev/null
@@ -1,844 +0,0 @@
-/*
- * sym53c416.c
- * Low-level SCSI driver for sym53c416 chip.
- * Copyright (C) 1998 Lieven Willems (lw_linux@hotmail.com)
- *
- * Changes :
- *
- * Marcelo Tosatti <marcelo@conectiva.com.br> : Added io_request_lock locking
- * Alan Cox <alan@lxorguk.ukuu.org.uk> : Cleaned up code formatting
- * Fixed an irq locking bug
- * Added ISAPnP support
- * Bjoern A. Zeeb <bzeeb@zabbadoz.net> : Initial irq locking updates
- * Added another card with ISAPnP support
- *
- * LILO command line usage: sym53c416=<PORTBASE>[,<IRQ>]
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/proc_fs.h>
-#include <linux/spinlock.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <linux/blkdev.h>
-#include <linux/isapnp.h>
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "sym53c416.h"
-
-#define VERSION_STRING "Version 1.0.0-ac"
-
-#define TC_LOW 0x00 /* Transfer counter low */
-#define TC_MID 0x01 /* Transfer counter mid */
-#define SCSI_FIFO 0x02 /* SCSI FIFO register */
-#define COMMAND_REG 0x03 /* Command Register */
-#define STATUS_REG 0x04 /* Status Register (READ) */
-#define DEST_BUS_ID 0x04 /* Destination Bus ID (WRITE) */
-#define INT_REG 0x05 /* Interrupt Register (READ) */
-#define TOM 0x05 /* Time out multiplier (WRITE) */
-#define STP 0x06 /* Synchronous Transfer period */
-#define SYNC_OFFSET 0x07 /* Synchronous Offset */
-#define CONF_REG_1 0x08 /* Configuration register 1 */
-#define CONF_REG_2 0x0B /* Configuration register 2 */
-#define CONF_REG_3 0x0C /* Configuration register 3 */
-#define CONF_REG_4 0x0D /* Configuration register 4 */
-#define TC_HIGH 0x0E /* Transfer counter high */
-#define PIO_FIFO_1 0x10 /* PIO FIFO register 1 */
-#define PIO_FIFO_2 0x11 /* PIO FIFO register 2 */
-#define PIO_FIFO_3 0x12 /* PIO FIFO register 3 */
-#define PIO_FIFO_4 0x13 /* PIO FIFO register 4 */
-#define PIO_FIFO_CNT 0x14 /* PIO FIFO count */
-#define PIO_INT_REG 0x15 /* PIO interrupt register */
-#define CONF_REG_5 0x16 /* Configuration register 5 */
-#define FEATURE_EN 0x1D /* Feature Enable register */
-
-/* Configuration register 1 entries: */
-/* Bits 2-0: SCSI ID of host adapter */
-#define SCM 0x80 /* Slow Cable Mode */
-#define SRID 0x40 /* SCSI Reset Interrupt Disable */
-#define PTM 0x20 /* Parity Test Mode */
-#define EPC 0x10 /* Enable Parity Checking */
-#define CTME 0x08 /* Special Test Mode */
-
-/* Configuration register 2 entries: */
-#define FE 0x40 /* Features Enable */
-#define SCSI2 0x08 /* SCSI 2 Enable */
-#define TBPA 0x04 /* Target Bad Parity Abort */
-
-/* Configuration register 3 entries: */
-#define IDMRC 0x80 /* ID Message Reserved Check */
-#define QTE 0x40 /* Queue Tag Enable */
-#define CDB10 0x20 /* Command Descriptor Block 10 */
-#define FSCSI 0x10 /* FastSCSI */
-#define FCLK 0x08 /* FastClock */
-
-/* Configuration register 4 entries: */
-#define RBS 0x08 /* Register bank select */
-#define EAN 0x04 /* Enable Active Negotiation */
-
-/* Configuration register 5 entries: */
-#define LPSR 0x80 /* Lower Power SCSI Reset */
-#define IE 0x20 /* Interrupt Enable */
-#define LPM 0x02 /* Low Power Mode */
-#define WSE0 0x01 /* 0WS Enable */
-
-/* Interrupt register entries: */
-#define SRST 0x80 /* SCSI Reset */
-#define ILCMD 0x40 /* Illegal Command */
-#define DIS 0x20 /* Disconnect */
-#define BS 0x10 /* Bus Service */
-#define FC 0x08 /* Function Complete */
-#define RESEL 0x04 /* Reselected */
-#define SI 0x03 /* Selection Interrupt */
-
-/* Status Register Entries: */
-#define SCI 0x80 /* SCSI Core Int */
-#define GE 0x40 /* Gross Error */
-#define PE 0x20 /* Parity Error */
-#define TC 0x10 /* Terminal Count */
-#define VGC 0x08 /* Valid Group Code */
-#define PHBITS 0x07 /* Phase bits */
-
-/* PIO Interrupt Register Entries: */
-#define SCI 0x80 /* SCSI Core Int */
-#define PFI 0x40 /* PIO FIFO Interrupt */
-#define FULL 0x20 /* PIO FIFO Full */
-#define EMPTY 0x10 /* PIO FIFO Empty */
-#define CE 0x08 /* Collision Error */
-#define OUE 0x04 /* Overflow / Underflow error */
-#define FIE 0x02 /* Full Interrupt Enable */
-#define EIE 0x01 /* Empty Interrupt Enable */
-
-/* SYM53C416 SCSI phases (lower 3 bits of SYM53C416_STATUS_REG) */
-#define PHASE_DATA_OUT 0x00
-#define PHASE_DATA_IN 0x01
-#define PHASE_COMMAND 0x02
-#define PHASE_STATUS 0x03
-#define PHASE_RESERVED_1 0x04
-#define PHASE_RESERVED_2 0x05
-#define PHASE_MESSAGE_OUT 0x06
-#define PHASE_MESSAGE_IN 0x07
-
-/* SYM53C416 core commands */
-#define NOOP 0x00
-#define FLUSH_FIFO 0x01
-#define RESET_CHIP 0x02
-#define RESET_SCSI_BUS 0x03
-#define DISABLE_SEL_RESEL 0x45
-#define RESEL_SEQ 0x40
-#define SEL_WITHOUT_ATN_SEQ 0x41
-#define SEL_WITH_ATN_SEQ 0x42
-#define SEL_WITH_ATN_AND_STOP_SEQ 0x43
-#define ENABLE_SEL_RESEL 0x44
-#define SEL_WITH_ATN3_SEQ 0x46
-#define RESEL3_SEQ 0x47
-#define SND_MSG 0x20
-#define SND_STAT 0x21
-#define SND_DATA 0x22
-#define DISCONNECT_SEQ 0x23
-#define TERMINATE_SEQ 0x24
-#define TARGET_COMM_COMPLETE_SEQ 0x25
-#define DISCONN 0x27
-#define RECV_MSG_SEQ 0x28
-#define RECV_CMD 0x29
-#define RECV_DATA 0x2A
-#define RECV_CMD_SEQ 0x2B
-#define TARGET_ABORT_PIO 0x04
-#define TRANSFER_INFORMATION 0x10
-#define INIT_COMM_COMPLETE_SEQ 0x11
-#define MSG_ACCEPTED 0x12
-#define TRANSFER_PAD 0x18
-#define SET_ATN 0x1A
-#define RESET_ATN 0x1B
-#define ILLEGAL 0xFF
-
-#define PIO_MODE 0x80
-
-#define IO_RANGE 0x20 /* 0x00 - 0x1F */
-#define ID "sym53c416" /* Attention: copied to the sym53c416.h */
-#define PIO_SIZE 128 /* Size of PIO fifo is 128 bytes */
-
-#define READ_TIMEOUT 150
-#define WRITE_TIMEOUT 150
-
-#ifdef MODULE
-
-#define sym53c416_base sym53c416
-#define sym53c416_base_1 sym53c416_1
-#define sym53c416_base_2 sym53c416_2
-#define sym53c416_base_3 sym53c416_3
-
-static unsigned int sym53c416_base[2];
-static unsigned int sym53c416_base_1[2];
-static unsigned int sym53c416_base_2[2];
-static unsigned int sym53c416_base_3[2];
-
-#endif
-
-#define MAXHOSTS 4
-
-#define SG_ADDRESS(buffer) ((char *) sg_virt((buffer)))
-
-enum phases
-{
- idle,
- data_out,
- data_in,
- command_ph,
- status_ph,
- message_out,
- message_in
-};
-
-typedef struct
-{
- int base;
- int irq;
- int scsi_id;
-} host;
-
-static host hosts[MAXHOSTS] = {
- {0, 0, SYM53C416_SCSI_ID},
- {0, 0, SYM53C416_SCSI_ID},
- {0, 0, SYM53C416_SCSI_ID},
- {0, 0, SYM53C416_SCSI_ID}
- };
-
-static int host_index = 0;
-static char info[120];
-static Scsi_Cmnd *current_command = NULL;
-static int fastpio = 1;
-
-static int probeaddrs[] = {0x200, 0x220, 0x240, 0};
-
-static void sym53c416_set_transfer_counter(int base, unsigned int len)
-{
- /* Program Transfer Counter */
- outb(len & 0x0000FF, base + TC_LOW);
- outb((len & 0x00FF00) >> 8, base + TC_MID);
- outb((len & 0xFF0000) >> 16, base + TC_HIGH);
-}
-
-static DEFINE_SPINLOCK(sym53c416_lock);
-
-/* Returns the number of bytes read */
-static __inline__ unsigned int sym53c416_read(int base, unsigned char *buffer, unsigned int len)
-{
- unsigned int orig_len = len;
- unsigned long flags = 0;
- unsigned int bytes_left;
- unsigned long i;
- int timeout = READ_TIMEOUT;
-
- /* Do transfer */
- spin_lock_irqsave(&sym53c416_lock, flags);
- while(len && timeout)
- {
- bytes_left = inb(base + PIO_FIFO_CNT); /* Number of bytes in the PIO FIFO */
- if(fastpio && bytes_left > 3)
- {
- insl(base + PIO_FIFO_1, buffer, bytes_left >> 2);
- buffer += bytes_left & 0xFC;
- len -= bytes_left & 0xFC;
- }
- else if(bytes_left > 0)
- {
- len -= bytes_left;
- for(; bytes_left > 0; bytes_left--)
- *(buffer++) = inb(base + PIO_FIFO_1);
- }
- else
- {
- i = jiffies + timeout;
- spin_unlock_irqrestore(&sym53c416_lock, flags);
- while(time_before(jiffies, i) && (inb(base + PIO_INT_REG) & EMPTY) && timeout)
- if(inb(base + PIO_INT_REG) & SCI)
- timeout = 0;
- spin_lock_irqsave(&sym53c416_lock, flags);
- if(inb(base + PIO_INT_REG) & EMPTY)
- timeout = 0;
- }
- }
- spin_unlock_irqrestore(&sym53c416_lock, flags);
- return orig_len - len;
-}
-
-/* Returns the number of bytes written */
-static __inline__ unsigned int sym53c416_write(int base, unsigned char *buffer, unsigned int len)
-{
- unsigned int orig_len = len;
- unsigned long flags = 0;
- unsigned int bufferfree;
- unsigned long i;
- unsigned int timeout = WRITE_TIMEOUT;
-
- /* Do transfer */
- spin_lock_irqsave(&sym53c416_lock, flags);
- while(len && timeout)
- {
- bufferfree = PIO_SIZE - inb(base + PIO_FIFO_CNT);
- if(bufferfree > len)
- bufferfree = len;
- if(fastpio && bufferfree > 3)
- {
- outsl(base + PIO_FIFO_1, buffer, bufferfree >> 2);
- buffer += bufferfree & 0xFC;
- len -= bufferfree & 0xFC;
- }
- else if(bufferfree > 0)
- {
- len -= bufferfree;
- for(; bufferfree > 0; bufferfree--)
- outb(*(buffer++), base + PIO_FIFO_1);
- }
- else
- {
- i = jiffies + timeout;
- spin_unlock_irqrestore(&sym53c416_lock, flags);
- while(time_before(jiffies, i) && (inb(base + PIO_INT_REG) & FULL) && timeout)
- ;
- spin_lock_irqsave(&sym53c416_lock, flags);
- if(inb(base + PIO_INT_REG) & FULL)
- timeout = 0;
- }
- }
- spin_unlock_irqrestore(&sym53c416_lock, flags);
- return orig_len - len;
-}
-
-static irqreturn_t sym53c416_intr_handle(int irq, void *dev_id)
-{
- struct Scsi_Host *dev = dev_id;
- int base = dev->io_port;
- int i;
- unsigned long flags = 0;
- unsigned char status_reg, pio_int_reg, int_reg;
- struct scatterlist *sg;
- unsigned int tot_trans = 0;
-
- spin_lock_irqsave(dev->host_lock,flags);
- status_reg = inb(base + STATUS_REG);
- pio_int_reg = inb(base + PIO_INT_REG);
- int_reg = inb(base + INT_REG);
- spin_unlock_irqrestore(dev->host_lock, flags);
-
- /* First, we handle error conditions */
- if(int_reg & SCI) /* SCSI Reset */
- {
- printk(KERN_DEBUG "sym53c416: Reset received\n");
- current_command->SCp.phase = idle;
- current_command->result = DID_RESET << 16;
- spin_lock_irqsave(dev->host_lock, flags);
- current_command->scsi_done(current_command);
- spin_unlock_irqrestore(dev->host_lock, flags);
- goto out;
- }
- if(int_reg & ILCMD) /* Illegal Command */
- {
- printk(KERN_WARNING "sym53c416: Illegal Command: 0x%02x.\n", inb(base + COMMAND_REG));
- current_command->SCp.phase = idle;
- current_command->result = DID_ERROR << 16;
- spin_lock_irqsave(dev->host_lock, flags);
- current_command->scsi_done(current_command);
- spin_unlock_irqrestore(dev->host_lock, flags);
- goto out;
- }
- if(status_reg & GE) /* Gross Error */
- {
- printk(KERN_WARNING "sym53c416: Controller reports gross error.\n");
- current_command->SCp.phase = idle;
- current_command->result = DID_ERROR << 16;
- spin_lock_irqsave(dev->host_lock, flags);
- current_command->scsi_done(current_command);
- spin_unlock_irqrestore(dev->host_lock, flags);
- goto out;
- }
- if(status_reg & PE) /* Parity Error */
- {
- printk(KERN_WARNING "sym53c416:SCSI parity error.\n");
- current_command->SCp.phase = idle;
- current_command->result = DID_PARITY << 16;
- spin_lock_irqsave(dev->host_lock, flags);
- current_command->scsi_done(current_command);
- spin_unlock_irqrestore(dev->host_lock, flags);
- goto out;
- }
- if(pio_int_reg & (CE | OUE))
- {
- printk(KERN_WARNING "sym53c416: PIO interrupt error.\n");
- current_command->SCp.phase = idle;
- current_command->result = DID_ERROR << 16;
- spin_lock_irqsave(dev->host_lock, flags);
- current_command->scsi_done(current_command);
- spin_unlock_irqrestore(dev->host_lock, flags);
- goto out;
- }
- if(int_reg & DIS) /* Disconnect */
- {
- if(current_command->SCp.phase != message_in)
- current_command->result = DID_NO_CONNECT << 16;
- else
- current_command->result = (current_command->SCp.Status & 0xFF) | ((current_command->SCp.Message & 0xFF) << 8) | (DID_OK << 16);
- current_command->SCp.phase = idle;
- spin_lock_irqsave(dev->host_lock, flags);
- current_command->scsi_done(current_command);
- spin_unlock_irqrestore(dev->host_lock, flags);
- goto out;
- }
- /* Now we handle SCSI phases */
-
- switch(status_reg & PHBITS) /* Filter SCSI phase out of status reg */
- {
- case PHASE_DATA_OUT:
- {
- if(int_reg & BS)
- {
- current_command->SCp.phase = data_out;
- outb(FLUSH_FIFO, base + COMMAND_REG);
- sym53c416_set_transfer_counter(base,
- scsi_bufflen(current_command));
- outb(TRANSFER_INFORMATION | PIO_MODE, base + COMMAND_REG);
-
- scsi_for_each_sg(current_command,
- sg, scsi_sg_count(current_command), i) {
- tot_trans += sym53c416_write(base,
- SG_ADDRESS(sg),
- sg->length);
- }
- if(tot_trans < current_command->underflow)
- printk(KERN_WARNING "sym53c416: Underflow, wrote %d bytes, request for %d bytes.\n", tot_trans, current_command->underflow);
- }
- break;
- }
-
- case PHASE_DATA_IN:
- {
- if(int_reg & BS)
- {
- current_command->SCp.phase = data_in;
- outb(FLUSH_FIFO, base + COMMAND_REG);
- sym53c416_set_transfer_counter(base,
- scsi_bufflen(current_command));
-
- outb(TRANSFER_INFORMATION | PIO_MODE, base + COMMAND_REG);
-
- scsi_for_each_sg(current_command,
- sg, scsi_sg_count(current_command), i) {
- tot_trans += sym53c416_read(base,
- SG_ADDRESS(sg),
- sg->length);
- }
- if(tot_trans < current_command->underflow)
- printk(KERN_WARNING "sym53c416: Underflow, read %d bytes, request for %d bytes.\n", tot_trans, current_command->underflow);
- }
- break;
- }
-
- case PHASE_COMMAND:
- {
- current_command->SCp.phase = command_ph;
- printk(KERN_ERR "sym53c416: Unknown interrupt in command phase.\n");
- break;
- }
-
- case PHASE_STATUS:
- {
- current_command->SCp.phase = status_ph;
- outb(FLUSH_FIFO, base + COMMAND_REG);
- outb(INIT_COMM_COMPLETE_SEQ, base + COMMAND_REG);
- break;
- }
-
- case PHASE_RESERVED_1:
- case PHASE_RESERVED_2:
- {
- printk(KERN_ERR "sym53c416: Reserved phase occurred.\n");
- break;
- }
-
- case PHASE_MESSAGE_OUT:
- {
- current_command->SCp.phase = message_out;
- outb(SET_ATN, base + COMMAND_REG);
- outb(MSG_ACCEPTED, base + COMMAND_REG);
- break;
- }
-
- case PHASE_MESSAGE_IN:
- {
- current_command->SCp.phase = message_in;
- current_command->SCp.Status = inb(base + SCSI_FIFO);
- current_command->SCp.Message = inb(base + SCSI_FIFO);
- if(current_command->SCp.Message == SAVE_POINTERS || current_command->SCp.Message == DISCONNECT)
- outb(SET_ATN, base + COMMAND_REG);
- outb(MSG_ACCEPTED, base + COMMAND_REG);
- break;
- }
- }
-out:
- return IRQ_HANDLED;
-}
-
-static void sym53c416_init(int base, int scsi_id)
-{
- outb(RESET_CHIP, base + COMMAND_REG);
- outb(NOOP, base + COMMAND_REG);
- outb(0x99, base + TOM); /* Time out of 250 ms */
- outb(0x05, base + STP);
- outb(0x00, base + SYNC_OFFSET);
- outb(EPC | scsi_id, base + CONF_REG_1);
- outb(FE | SCSI2 | TBPA, base + CONF_REG_2);
- outb(IDMRC | QTE | CDB10 | FSCSI | FCLK, base + CONF_REG_3);
- outb(0x83 | EAN, base + CONF_REG_4);
- outb(IE | WSE0, base + CONF_REG_5);
- outb(0, base + FEATURE_EN);
-}
-
-static int sym53c416_probeirq(int base, int scsi_id)
-{
- int irq, irqs;
- unsigned long i;
-
- /* Clear interrupt register */
- inb(base + INT_REG);
- /* Start probing for irq's */
- irqs = probe_irq_on();
- /* Reinit chip */
- sym53c416_init(base, scsi_id);
- /* Cause interrupt */
- outb(NOOP, base + COMMAND_REG);
- outb(ILLEGAL, base + COMMAND_REG);
- outb(0x07, base + DEST_BUS_ID);
- outb(0x00, base + DEST_BUS_ID);
- /* Wait for interrupt to occur */
- i = jiffies + 20;
- while(time_before(jiffies, i) && !(inb(base + STATUS_REG) & SCI))
- barrier();
- if(time_before_eq(i, jiffies)) /* timed out */
- return 0;
- /* Get occurred irq */
- irq = probe_irq_off(irqs);
- sym53c416_init(base, scsi_id);
- return irq;
-}
-
-/* Setup: sym53c416=base,irq */
-void sym53c416_setup(char *str, int *ints)
-{
- int i;
-
- if(host_index >= MAXHOSTS)
- {
- printk(KERN_WARNING "sym53c416: Too many hosts defined\n");
- return;
- }
- if(ints[0] < 1 || ints[0] > 2)
- {
- printk(KERN_ERR "sym53c416: Wrong number of parameters:\n");
- printk(KERN_ERR "sym53c416: usage: sym53c416=<base>[,<irq>]\n");
- return;
- }
- for(i = 0; i < host_index && i >= 0; i++)
- if(hosts[i].base == ints[1])
- i = -2;
- if(i >= 0)
- {
- hosts[host_index].base = ints[1];
- hosts[host_index].irq = (ints[0] == 2)? ints[2] : 0;
- host_index++;
- }
-}
-
-static int sym53c416_test(int base)
-{
- outb(RESET_CHIP, base + COMMAND_REG);
- outb(NOOP, base + COMMAND_REG);
- if(inb(base + COMMAND_REG) != NOOP)
- return 0;
- if(!inb(base + TC_HIGH) || inb(base + TC_HIGH) == 0xFF)
- return 0;
- if((inb(base + PIO_INT_REG) & (FULL | EMPTY | CE | OUE | FIE | EIE)) != EMPTY)
- return 0;
- return 1;
-}
-
-
-static struct isapnp_device_id id_table[] = {
- { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('S','L','I'), ISAPNP_FUNCTION(0x4161), 0 },
- { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('S','L','I'), ISAPNP_FUNCTION(0x4163), 0 },
- { ISAPNP_DEVICE_SINGLE_END }
-};
-
-MODULE_DEVICE_TABLE(isapnp, id_table);
-
-static void sym53c416_probe(void)
-{
- int *base = probeaddrs;
- int ints[2];
-
- ints[0] = 1;
- for(; *base; base++) {
- if (request_region(*base, IO_RANGE, ID)) {
- if (sym53c416_test(*base)) {
- ints[1] = *base;
- sym53c416_setup(NULL, ints);
- }
- release_region(*base, IO_RANGE);
- }
- }
-}
-
-int __init sym53c416_detect(struct scsi_host_template *tpnt)
-{
- unsigned long flags;
- struct Scsi_Host * shpnt = NULL;
- int i;
- int count;
- struct pnp_dev *idev = NULL;
-
-#ifdef MODULE
- int ints[3];
-
- ints[0] = 2;
- if(sym53c416_base[0])
- {
- ints[1] = sym53c416_base[0];
- ints[2] = sym53c416_base[1];
- sym53c416_setup(NULL, ints);
- }
- if(sym53c416_base_1[0])
- {
- ints[1] = sym53c416_base_1[0];
- ints[2] = sym53c416_base_1[1];
- sym53c416_setup(NULL, ints);
- }
- if(sym53c416_base_2[0])
- {
- ints[1] = sym53c416_base_2[0];
- ints[2] = sym53c416_base_2[1];
- sym53c416_setup(NULL, ints);
- }
- if(sym53c416_base_3[0])
- {
- ints[1] = sym53c416_base_3[0];
- ints[2] = sym53c416_base_3[1];
- sym53c416_setup(NULL, ints);
- }
-#endif
- printk(KERN_INFO "sym53c416.c: %s\n", VERSION_STRING);
-
- for (i=0; id_table[i].vendor != 0; i++) {
- while((idev=pnp_find_dev(NULL, id_table[i].vendor,
- id_table[i].function, idev))!=NULL)
- {
- int i[3];
-
- if(pnp_device_attach(idev)<0)
- {
- printk(KERN_WARNING "sym53c416: unable to attach PnP device.\n");
- continue;
- }
- if(pnp_activate_dev(idev) < 0)
- {
- printk(KERN_WARNING "sym53c416: unable to activate PnP device.\n");
- pnp_device_detach(idev);
- continue;
-
- }
-
- i[0] = 2;
- i[1] = pnp_port_start(idev, 0);
- i[2] = pnp_irq(idev, 0);
-
- printk(KERN_INFO "sym53c416: ISAPnP card found and configured at 0x%X, IRQ %d.\n",
- i[1], i[2]);
- sym53c416_setup(NULL, i);
- }
- }
- sym53c416_probe();
-
- /* Now we register and set up each host adapter found... */
- for(count = 0, i = 0; i < host_index; i++) {
- if (!request_region(hosts[i].base, IO_RANGE, ID))
- continue;
- if (!sym53c416_test(hosts[i].base)) {
- printk(KERN_WARNING "No sym53c416 found at address 0x%03x\n", hosts[i].base);
- goto fail_release_region;
- }
-
- /* We don't have an irq yet, so we should probe for one */
- if (!hosts[i].irq)
- hosts[i].irq = sym53c416_probeirq(hosts[i].base, hosts[i].scsi_id);
- if (!hosts[i].irq)
- goto fail_release_region;
-
- shpnt = scsi_register(tpnt, 0);
- if (!shpnt)
- goto fail_release_region;
- /* Request for specified IRQ */
- if (request_irq(hosts[i].irq, sym53c416_intr_handle, 0, ID, shpnt))
- goto fail_free_host;
-
- spin_lock_irqsave(&sym53c416_lock, flags);
- shpnt->unique_id = hosts[i].base;
- shpnt->io_port = hosts[i].base;
- shpnt->n_io_port = IO_RANGE;
- shpnt->irq = hosts[i].irq;
- shpnt->this_id = hosts[i].scsi_id;
- sym53c416_init(hosts[i].base, hosts[i].scsi_id);
- count++;
- spin_unlock_irqrestore(&sym53c416_lock, flags);
- continue;
-
- fail_free_host:
- scsi_unregister(shpnt);
- fail_release_region:
- release_region(hosts[i].base, IO_RANGE);
- }
- return count;
-}
-
-const char *sym53c416_info(struct Scsi_Host *SChost)
-{
- int i;
- int base = SChost->io_port;
- int irq = SChost->irq;
- int scsi_id = 0;
- int rev = inb(base + TC_HIGH);
-
- for(i = 0; i < host_index; i++)
- if(hosts[i].base == base)
- scsi_id = hosts[i].scsi_id;
- sprintf(info, "Symbios Logic 53c416 (rev. %d) at 0x%03x, irq %d, SCSI-ID %d, %s pio", rev, base, irq, scsi_id, (fastpio)? "fast" : "slow");
- return info;
-}
-
-static int sym53c416_queuecommand_lck(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
-{
- int base;
- unsigned long flags = 0;
- int i;
-
- /* Store base register as we can have more than one controller in the system */
- base = SCpnt->device->host->io_port;
- current_command = SCpnt; /* set current command */
- current_command->scsi_done = done; /* set ptr to done function */
- current_command->SCp.phase = command_ph; /* currect phase is the command phase */
- current_command->SCp.Status = 0;
- current_command->SCp.Message = 0;
-
- spin_lock_irqsave(&sym53c416_lock, flags);
- outb(scmd_id(SCpnt), base + DEST_BUS_ID); /* Set scsi id target */
- outb(FLUSH_FIFO, base + COMMAND_REG); /* Flush SCSI and PIO FIFO's */
- /* Write SCSI command into the SCSI fifo */
- for(i = 0; i < SCpnt->cmd_len; i++)
- outb(SCpnt->cmnd[i], base + SCSI_FIFO);
- /* Start selection sequence */
- outb(SEL_WITHOUT_ATN_SEQ, base + COMMAND_REG);
- /* Now an interrupt will be generated which we will catch in out interrupt routine */
- spin_unlock_irqrestore(&sym53c416_lock, flags);
- return 0;
-}
-
-DEF_SCSI_QCMD(sym53c416_queuecommand)
-
-static int sym53c416_host_reset(Scsi_Cmnd *SCpnt)
-{
- int base;
- int scsi_id = -1;
- int i;
- unsigned long flags;
-
- spin_lock_irqsave(&sym53c416_lock, flags);
-
- /* printk("sym53c416_reset\n"); */
- base = SCpnt->device->host->io_port;
- /* search scsi_id - fixme, we shouldn't need to iterate for this! */
- for(i = 0; i < host_index && scsi_id == -1; i++)
- if(hosts[i].base == base)
- scsi_id = hosts[i].scsi_id;
- outb(RESET_CHIP, base + COMMAND_REG);
- outb(NOOP | PIO_MODE, base + COMMAND_REG);
- outb(RESET_SCSI_BUS, base + COMMAND_REG);
- sym53c416_init(base, scsi_id);
-
- spin_unlock_irqrestore(&sym53c416_lock, flags);
- return SUCCESS;
-}
-
-static int sym53c416_release(struct Scsi_Host *shost)
-{
- if (shost->irq)
- free_irq(shost->irq, shost);
- if (shost->io_port && shost->n_io_port)
- release_region(shost->io_port, shost->n_io_port);
- return 0;
-}
-
-static int sym53c416_bios_param(struct scsi_device *sdev,
- struct block_device *dev,
- sector_t capacity, int *ip)
-{
- int size;
-
- size = capacity;
- ip[0] = 64; /* heads */
- ip[1] = 32; /* sectors */
- if((ip[2] = size >> 11) > 1024) /* cylinders, test for big disk */
- {
- ip[0] = 255; /* heads */
- ip[1] = 63; /* sectors */
- ip[2] = size / (255 * 63); /* cylinders */
- }
- return 0;
-}
-
-/* Loadable module support */
-#ifdef MODULE
-
-MODULE_AUTHOR("Lieven Willems");
-MODULE_LICENSE("GPL");
-
-module_param_array(sym53c416, uint, NULL, 0);
-module_param_array(sym53c416_1, uint, NULL, 0);
-module_param_array(sym53c416_2, uint, NULL, 0);
-module_param_array(sym53c416_3, uint, NULL, 0);
-
-#endif
-
-static struct scsi_host_template driver_template = {
- .proc_name = "sym53c416",
- .name = "Symbios Logic 53c416",
- .detect = sym53c416_detect,
- .info = sym53c416_info,
- .queuecommand = sym53c416_queuecommand,
- .eh_host_reset_handler =sym53c416_host_reset,
- .release = sym53c416_release,
- .bios_param = sym53c416_bios_param,
- .can_queue = 1,
- .this_id = SYM53C416_SCSI_ID,
- .sg_tablesize = 32,
- .unchecked_isa_dma = 1,
- .use_clustering = ENABLE_CLUSTERING,
-};
-#include "scsi_module.c"
diff --git a/drivers/scsi/sym53c416.h b/drivers/scsi/sym53c416.h
deleted file mode 100644
index 387de5d80a70..000000000000
--- a/drivers/scsi/sym53c416.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * sym53c416.h
- *
- * Copyright (C) 1998 Lieven Willems (lw_linux@hotmail.com)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- */
-
-#ifndef _SYM53C416_H
-#define _SYM53C416_H
-
-#include <linux/types.h>
-
-#define SYM53C416_SCSI_ID 7
-
-static int sym53c416_detect(struct scsi_host_template *);
-static const char *sym53c416_info(struct Scsi_Host *);
-static int sym53c416_release(struct Scsi_Host *);
-static int sym53c416_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
-static int sym53c416_host_reset(Scsi_Cmnd *);
-static int sym53c416_bios_param(struct scsi_device *, struct block_device *,
- sector_t, int *);
-static void sym53c416_setup(char *str, int *ints);
-#endif
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 9310c6c83041..918f5791202d 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -3,6 +3,7 @@
obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-pci.o ufshcd-dwc.o tc-dwc-g210.o
obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o
obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
-obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
+obj-$(CONFIG_SCSI_UFSHCD) += ufshcd-core.o
+ufshcd-core-objs := ufshcd.o ufs-sysfs.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
diff --git a/drivers/scsi/ufs/tc-dwc-g210-pci.c b/drivers/scsi/ufs/tc-dwc-g210-pci.c
index 325d5e14fc0d..2f41722a8c28 100644
--- a/drivers/scsi/ufs/tc-dwc-g210-pci.c
+++ b/drivers/scsi/ufs/tc-dwc-g210-pci.c
@@ -51,7 +51,7 @@ static int tc_dwc_g210_pci_runtime_idle(struct device *dev)
return ufshcd_runtime_idle(dev_get_drvdata(dev));
}
-/**
+/*
* struct ufs_hba_dwc_vops - UFS DWC specific variant operations
*/
static struct ufs_hba_variant_ops tc_dwc_g210_pci_hba_vops = {
@@ -71,7 +71,7 @@ static void tc_dwc_g210_pci_shutdown(struct pci_dev *pdev)
/**
* tc_dwc_g210_pci_remove - de-allocate PCI/SCSI host and host memory space
* data structure memory
- * @pdev - pointer to PCI handle
+ * @pdev: pointer to PCI handle
*/
static void tc_dwc_g210_pci_remove(struct pci_dev *pdev)
{
diff --git a/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c b/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
index 2d3f5270f875..6dfe5a9206e9 100644
--- a/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
+++ b/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
@@ -20,7 +20,7 @@
#include "ufshcd-dwc.h"
#include "tc-dwc-g210.h"
-/**
+/*
* UFS DWC specific variant operations
*/
static struct ufs_hba_variant_ops tc_dwc_g210_20bit_pltfm_hba_vops = {
diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
new file mode 100644
index 000000000000..8d9332bb7d0c
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-sysfs.c
@@ -0,0 +1,817 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Western Digital Corporation
+
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/bitfield.h>
+#include <asm/unaligned.h>
+
+#include "ufs.h"
+#include "ufs-sysfs.h"
+
+static const char *ufschd_uic_link_state_to_string(
+ enum uic_link_state state)
+{
+ switch (state) {
+ case UIC_LINK_OFF_STATE: return "OFF";
+ case UIC_LINK_ACTIVE_STATE: return "ACTIVE";
+ case UIC_LINK_HIBERN8_STATE: return "HIBERN8";
+ default: return "UNKNOWN";
+ }
+}
+
+static const char *ufschd_ufs_dev_pwr_mode_to_string(
+ enum ufs_dev_pwr_mode state)
+{
+ switch (state) {
+ case UFS_ACTIVE_PWR_MODE: return "ACTIVE";
+ case UFS_SLEEP_PWR_MODE: return "SLEEP";
+ case UFS_POWERDOWN_PWR_MODE: return "POWERDOWN";
+ default: return "UNKNOWN";
+ }
+}
+
+static inline ssize_t ufs_sysfs_pm_lvl_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count,
+ bool rpm)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ unsigned long flags, value;
+
+ if (kstrtoul(buf, 0, &value))
+ return -EINVAL;
+
+ if (value >= UFS_PM_LVL_MAX)
+ return -EINVAL;
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ if (rpm)
+ hba->rpm_lvl = value;
+ else
+ hba->spm_lvl = value;
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ return count;
+}
+
+static ssize_t rpm_lvl_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", hba->rpm_lvl);
+}
+
+static ssize_t rpm_lvl_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return ufs_sysfs_pm_lvl_store(dev, attr, buf, count, true);
+}
+
+static ssize_t rpm_target_dev_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", ufschd_ufs_dev_pwr_mode_to_string(
+ ufs_pm_lvl_states[hba->rpm_lvl].dev_state));
+}
+
+static ssize_t rpm_target_link_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", ufschd_uic_link_state_to_string(
+ ufs_pm_lvl_states[hba->rpm_lvl].link_state));
+}
+
+static ssize_t spm_lvl_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", hba->spm_lvl);
+}
+
+static ssize_t spm_lvl_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return ufs_sysfs_pm_lvl_store(dev, attr, buf, count, false);
+}
+
+static ssize_t spm_target_dev_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", ufschd_ufs_dev_pwr_mode_to_string(
+ ufs_pm_lvl_states[hba->spm_lvl].dev_state));
+}
+
+static ssize_t spm_target_link_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", ufschd_uic_link_state_to_string(
+ ufs_pm_lvl_states[hba->spm_lvl].link_state));
+}
+
+static void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit)
+{
+ unsigned long flags;
+
+ if (!(hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT))
+ return;
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ if (hba->ahit == ahit)
+ goto out_unlock;
+ hba->ahit = ahit;
+ if (!pm_runtime_suspended(hba->dev))
+ ufshcd_writel(hba, hba->ahit, REG_AUTO_HIBERNATE_IDLE_TIMER);
+out_unlock:
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+}
+
+/* Convert Auto-Hibernate Idle Timer register value to microseconds */
+static int ufshcd_ahit_to_us(u32 ahit)
+{
+ int timer = FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, ahit);
+ int scale = FIELD_GET(UFSHCI_AHIBERN8_SCALE_MASK, ahit);
+
+ for (; scale > 0; --scale)
+ timer *= UFSHCI_AHIBERN8_SCALE_FACTOR;
+
+ return timer;
+}
+
+/* Convert microseconds to Auto-Hibernate Idle Timer register value */
+static u32 ufshcd_us_to_ahit(unsigned int timer)
+{
+ unsigned int scale;
+
+ for (scale = 0; timer > UFSHCI_AHIBERN8_TIMER_MASK; ++scale)
+ timer /= UFSHCI_AHIBERN8_SCALE_FACTOR;
+
+ return FIELD_PREP(UFSHCI_AHIBERN8_TIMER_MASK, timer) |
+ FIELD_PREP(UFSHCI_AHIBERN8_SCALE_MASK, scale);
+}
+
+static ssize_t auto_hibern8_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ if (!(hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT))
+ return -EOPNOTSUPP;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", ufshcd_ahit_to_us(hba->ahit));
+}
+
+static ssize_t auto_hibern8_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ unsigned int timer;
+
+ if (!(hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT))
+ return -EOPNOTSUPP;
+
+ if (kstrtouint(buf, 0, &timer))
+ return -EINVAL;
+
+ if (timer > UFSHCI_AHIBERN8_MAX)
+ return -EINVAL;
+
+ ufshcd_auto_hibern8_update(hba, ufshcd_us_to_ahit(timer));
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(rpm_lvl);
+static DEVICE_ATTR_RO(rpm_target_dev_state);
+static DEVICE_ATTR_RO(rpm_target_link_state);
+static DEVICE_ATTR_RW(spm_lvl);
+static DEVICE_ATTR_RO(spm_target_dev_state);
+static DEVICE_ATTR_RO(spm_target_link_state);
+static DEVICE_ATTR_RW(auto_hibern8);
+
+static struct attribute *ufs_sysfs_ufshcd_attrs[] = {
+ &dev_attr_rpm_lvl.attr,
+ &dev_attr_rpm_target_dev_state.attr,
+ &dev_attr_rpm_target_link_state.attr,
+ &dev_attr_spm_lvl.attr,
+ &dev_attr_spm_target_dev_state.attr,
+ &dev_attr_spm_target_link_state.attr,
+ &dev_attr_auto_hibern8.attr,
+ NULL
+};
+
+static const struct attribute_group ufs_sysfs_default_group = {
+ .attrs = ufs_sysfs_ufshcd_attrs,
+};
+
+static ssize_t ufs_sysfs_read_desc_param(struct ufs_hba *hba,
+ enum desc_idn desc_id,
+ u8 desc_index,
+ u8 param_offset,
+ u8 *sysfs_buf,
+ u8 param_size)
+{
+ u8 desc_buf[8] = {0};
+ int ret;
+
+ if (param_size > 8)
+ return -EINVAL;
+
+ ret = ufshcd_read_desc_param(hba, desc_id, desc_index,
+ param_offset, desc_buf, param_size);
+ if (ret)
+ return -EINVAL;
+ switch (param_size) {
+ case 1:
+ ret = sprintf(sysfs_buf, "0x%02X\n", *desc_buf);
+ break;
+ case 2:
+ ret = sprintf(sysfs_buf, "0x%04X\n",
+ get_unaligned_be16(desc_buf));
+ break;
+ case 4:
+ ret = sprintf(sysfs_buf, "0x%08X\n",
+ get_unaligned_be32(desc_buf));
+ break;
+ case 8:
+ ret = sprintf(sysfs_buf, "0x%016llX\n",
+ get_unaligned_be64(desc_buf));
+ break;
+ }
+
+ return ret;
+}
+
+#define UFS_DESC_PARAM(_name, _puname, _duname, _size) \
+static ssize_t _name##_show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct ufs_hba *hba = dev_get_drvdata(dev); \
+ return ufs_sysfs_read_desc_param(hba, QUERY_DESC_IDN_##_duname, \
+ 0, _duname##_DESC_PARAM##_puname, buf, _size); \
+} \
+static DEVICE_ATTR_RO(_name)
+
+#define UFS_DEVICE_DESC_PARAM(_name, _uname, _size) \
+ UFS_DESC_PARAM(_name, _uname, DEVICE, _size)
+
+UFS_DEVICE_DESC_PARAM(device_type, _DEVICE_TYPE, 1);
+UFS_DEVICE_DESC_PARAM(device_class, _DEVICE_CLASS, 1);
+UFS_DEVICE_DESC_PARAM(device_sub_class, _DEVICE_SUB_CLASS, 1);
+UFS_DEVICE_DESC_PARAM(protocol, _PRTCL, 1);
+UFS_DEVICE_DESC_PARAM(number_of_luns, _NUM_LU, 1);
+UFS_DEVICE_DESC_PARAM(number_of_wluns, _NUM_WLU, 1);
+UFS_DEVICE_DESC_PARAM(boot_enable, _BOOT_ENBL, 1);
+UFS_DEVICE_DESC_PARAM(descriptor_access_enable, _DESC_ACCSS_ENBL, 1);
+UFS_DEVICE_DESC_PARAM(initial_power_mode, _INIT_PWR_MODE, 1);
+UFS_DEVICE_DESC_PARAM(high_priority_lun, _HIGH_PR_LUN, 1);
+UFS_DEVICE_DESC_PARAM(secure_removal_type, _SEC_RMV_TYPE, 1);
+UFS_DEVICE_DESC_PARAM(support_security_lun, _SEC_LU, 1);
+UFS_DEVICE_DESC_PARAM(bkops_termination_latency, _BKOP_TERM_LT, 1);
+UFS_DEVICE_DESC_PARAM(initial_active_icc_level, _ACTVE_ICC_LVL, 1);
+UFS_DEVICE_DESC_PARAM(specification_version, _SPEC_VER, 2);
+UFS_DEVICE_DESC_PARAM(manufacturing_date, _MANF_DATE, 2);
+UFS_DEVICE_DESC_PARAM(manufacturer_id, _MANF_ID, 2);
+UFS_DEVICE_DESC_PARAM(rtt_capability, _RTT_CAP, 1);
+UFS_DEVICE_DESC_PARAM(rtc_update, _FRQ_RTC, 2);
+UFS_DEVICE_DESC_PARAM(ufs_features, _UFS_FEAT, 1);
+UFS_DEVICE_DESC_PARAM(ffu_timeout, _FFU_TMT, 1);
+UFS_DEVICE_DESC_PARAM(queue_depth, _Q_DPTH, 1);
+UFS_DEVICE_DESC_PARAM(device_version, _DEV_VER, 2);
+UFS_DEVICE_DESC_PARAM(number_of_secure_wpa, _NUM_SEC_WPA, 1);
+UFS_DEVICE_DESC_PARAM(psa_max_data_size, _PSA_MAX_DATA, 4);
+UFS_DEVICE_DESC_PARAM(psa_state_timeout, _PSA_TMT, 1);
+
+static struct attribute *ufs_sysfs_device_descriptor[] = {
+ &dev_attr_device_type.attr,
+ &dev_attr_device_class.attr,
+ &dev_attr_device_sub_class.attr,
+ &dev_attr_protocol.attr,
+ &dev_attr_number_of_luns.attr,
+ &dev_attr_number_of_wluns.attr,
+ &dev_attr_boot_enable.attr,
+ &dev_attr_descriptor_access_enable.attr,
+ &dev_attr_initial_power_mode.attr,
+ &dev_attr_high_priority_lun.attr,
+ &dev_attr_secure_removal_type.attr,
+ &dev_attr_support_security_lun.attr,
+ &dev_attr_bkops_termination_latency.attr,
+ &dev_attr_initial_active_icc_level.attr,
+ &dev_attr_specification_version.attr,
+ &dev_attr_manufacturing_date.attr,
+ &dev_attr_manufacturer_id.attr,
+ &dev_attr_rtt_capability.attr,
+ &dev_attr_rtc_update.attr,
+ &dev_attr_ufs_features.attr,
+ &dev_attr_ffu_timeout.attr,
+ &dev_attr_queue_depth.attr,
+ &dev_attr_device_version.attr,
+ &dev_attr_number_of_secure_wpa.attr,
+ &dev_attr_psa_max_data_size.attr,
+ &dev_attr_psa_state_timeout.attr,
+ NULL,
+};
+
+static const struct attribute_group ufs_sysfs_device_descriptor_group = {
+ .name = "device_descriptor",
+ .attrs = ufs_sysfs_device_descriptor,
+};
+
+#define UFS_INTERCONNECT_DESC_PARAM(_name, _uname, _size) \
+ UFS_DESC_PARAM(_name, _uname, INTERCONNECT, _size)
+
+UFS_INTERCONNECT_DESC_PARAM(unipro_version, _UNIPRO_VER, 2);
+UFS_INTERCONNECT_DESC_PARAM(mphy_version, _MPHY_VER, 2);
+
+static struct attribute *ufs_sysfs_interconnect_descriptor[] = {
+ &dev_attr_unipro_version.attr,
+ &dev_attr_mphy_version.attr,
+ NULL,
+};
+
+static const struct attribute_group ufs_sysfs_interconnect_descriptor_group = {
+ .name = "interconnect_descriptor",
+ .attrs = ufs_sysfs_interconnect_descriptor,
+};
+
+#define UFS_GEOMETRY_DESC_PARAM(_name, _uname, _size) \
+ UFS_DESC_PARAM(_name, _uname, GEOMETRY, _size)
+
+UFS_GEOMETRY_DESC_PARAM(raw_device_capacity, _DEV_CAP, 8);
+UFS_GEOMETRY_DESC_PARAM(max_number_of_luns, _MAX_NUM_LUN, 1);
+UFS_GEOMETRY_DESC_PARAM(segment_size, _SEG_SIZE, 4);
+UFS_GEOMETRY_DESC_PARAM(allocation_unit_size, _ALLOC_UNIT_SIZE, 1);
+UFS_GEOMETRY_DESC_PARAM(min_addressable_block_size, _MIN_BLK_SIZE, 1);
+UFS_GEOMETRY_DESC_PARAM(optimal_read_block_size, _OPT_RD_BLK_SIZE, 1);
+UFS_GEOMETRY_DESC_PARAM(optimal_write_block_size, _OPT_WR_BLK_SIZE, 1);
+UFS_GEOMETRY_DESC_PARAM(max_in_buffer_size, _MAX_IN_BUF_SIZE, 1);
+UFS_GEOMETRY_DESC_PARAM(max_out_buffer_size, _MAX_OUT_BUF_SIZE, 1);
+UFS_GEOMETRY_DESC_PARAM(rpmb_rw_size, _RPMB_RW_SIZE, 1);
+UFS_GEOMETRY_DESC_PARAM(dyn_capacity_resource_policy, _DYN_CAP_RSRC_PLC, 1);
+UFS_GEOMETRY_DESC_PARAM(data_ordering, _DATA_ORDER, 1);
+UFS_GEOMETRY_DESC_PARAM(max_number_of_contexts, _MAX_NUM_CTX, 1);
+UFS_GEOMETRY_DESC_PARAM(sys_data_tag_unit_size, _TAG_UNIT_SIZE, 1);
+UFS_GEOMETRY_DESC_PARAM(sys_data_tag_resource_size, _TAG_RSRC_SIZE, 1);
+UFS_GEOMETRY_DESC_PARAM(secure_removal_types, _SEC_RM_TYPES, 1);
+UFS_GEOMETRY_DESC_PARAM(memory_types, _MEM_TYPES, 2);
+UFS_GEOMETRY_DESC_PARAM(sys_code_memory_max_alloc_units,
+ _SCM_MAX_NUM_UNITS, 4);
+UFS_GEOMETRY_DESC_PARAM(sys_code_memory_capacity_adjustment_factor,
+ _SCM_CAP_ADJ_FCTR, 2);
+UFS_GEOMETRY_DESC_PARAM(non_persist_memory_max_alloc_units,
+ _NPM_MAX_NUM_UNITS, 4);
+UFS_GEOMETRY_DESC_PARAM(non_persist_memory_capacity_adjustment_factor,
+ _NPM_CAP_ADJ_FCTR, 2);
+UFS_GEOMETRY_DESC_PARAM(enh1_memory_max_alloc_units,
+ _ENM1_MAX_NUM_UNITS, 4);
+UFS_GEOMETRY_DESC_PARAM(enh1_memory_capacity_adjustment_factor,
+ _ENM1_CAP_ADJ_FCTR, 2);
+UFS_GEOMETRY_DESC_PARAM(enh2_memory_max_alloc_units,
+ _ENM2_MAX_NUM_UNITS, 4);
+UFS_GEOMETRY_DESC_PARAM(enh2_memory_capacity_adjustment_factor,
+ _ENM2_CAP_ADJ_FCTR, 2);
+UFS_GEOMETRY_DESC_PARAM(enh3_memory_max_alloc_units,
+ _ENM3_MAX_NUM_UNITS, 4);
+UFS_GEOMETRY_DESC_PARAM(enh3_memory_capacity_adjustment_factor,
+ _ENM3_CAP_ADJ_FCTR, 2);
+UFS_GEOMETRY_DESC_PARAM(enh4_memory_max_alloc_units,
+ _ENM4_MAX_NUM_UNITS, 4);
+UFS_GEOMETRY_DESC_PARAM(enh4_memory_capacity_adjustment_factor,
+ _ENM4_CAP_ADJ_FCTR, 2);
+
+static struct attribute *ufs_sysfs_geometry_descriptor[] = {
+ &dev_attr_raw_device_capacity.attr,
+ &dev_attr_max_number_of_luns.attr,
+ &dev_attr_segment_size.attr,
+ &dev_attr_allocation_unit_size.attr,
+ &dev_attr_min_addressable_block_size.attr,
+ &dev_attr_optimal_read_block_size.attr,
+ &dev_attr_optimal_write_block_size.attr,
+ &dev_attr_max_in_buffer_size.attr,
+ &dev_attr_max_out_buffer_size.attr,
+ &dev_attr_rpmb_rw_size.attr,
+ &dev_attr_dyn_capacity_resource_policy.attr,
+ &dev_attr_data_ordering.attr,
+ &dev_attr_max_number_of_contexts.attr,
+ &dev_attr_sys_data_tag_unit_size.attr,
+ &dev_attr_sys_data_tag_resource_size.attr,
+ &dev_attr_secure_removal_types.attr,
+ &dev_attr_memory_types.attr,
+ &dev_attr_sys_code_memory_max_alloc_units.attr,
+ &dev_attr_sys_code_memory_capacity_adjustment_factor.attr,
+ &dev_attr_non_persist_memory_max_alloc_units.attr,
+ &dev_attr_non_persist_memory_capacity_adjustment_factor.attr,
+ &dev_attr_enh1_memory_max_alloc_units.attr,
+ &dev_attr_enh1_memory_capacity_adjustment_factor.attr,
+ &dev_attr_enh2_memory_max_alloc_units.attr,
+ &dev_attr_enh2_memory_capacity_adjustment_factor.attr,
+ &dev_attr_enh3_memory_max_alloc_units.attr,
+ &dev_attr_enh3_memory_capacity_adjustment_factor.attr,
+ &dev_attr_enh4_memory_max_alloc_units.attr,
+ &dev_attr_enh4_memory_capacity_adjustment_factor.attr,
+ NULL,
+};
+
+static const struct attribute_group ufs_sysfs_geometry_descriptor_group = {
+ .name = "geometry_descriptor",
+ .attrs = ufs_sysfs_geometry_descriptor,
+};
+
+#define UFS_HEALTH_DESC_PARAM(_name, _uname, _size) \
+ UFS_DESC_PARAM(_name, _uname, HEALTH, _size)
+
+UFS_HEALTH_DESC_PARAM(eol_info, _EOL_INFO, 1);
+UFS_HEALTH_DESC_PARAM(life_time_estimation_a, _LIFE_TIME_EST_A, 1);
+UFS_HEALTH_DESC_PARAM(life_time_estimation_b, _LIFE_TIME_EST_B, 1);
+
+static struct attribute *ufs_sysfs_health_descriptor[] = {
+ &dev_attr_eol_info.attr,
+ &dev_attr_life_time_estimation_a.attr,
+ &dev_attr_life_time_estimation_b.attr,
+ NULL,
+};
+
+static const struct attribute_group ufs_sysfs_health_descriptor_group = {
+ .name = "health_descriptor",
+ .attrs = ufs_sysfs_health_descriptor,
+};
+
+#define UFS_POWER_DESC_PARAM(_name, _uname, _index) \
+static ssize_t _name##_index##_show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct ufs_hba *hba = dev_get_drvdata(dev); \
+ return ufs_sysfs_read_desc_param(hba, QUERY_DESC_IDN_POWER, 0, \
+ PWR_DESC##_uname##_0 + _index * 2, buf, 2); \
+} \
+static DEVICE_ATTR_RO(_name##_index)
+
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 0);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 1);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 2);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 3);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 4);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 5);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 6);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 7);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 8);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 9);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 10);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 11);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 12);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 13);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 14);
+UFS_POWER_DESC_PARAM(active_icc_levels_vcc, _ACTIVE_LVLS_VCC, 15);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 0);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 1);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 2);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 3);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 4);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 5);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 6);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 7);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 8);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 9);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 10);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 11);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 12);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 13);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 14);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq, _ACTIVE_LVLS_VCCQ, 15);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 0);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 1);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 2);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 3);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 4);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 5);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 6);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 7);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 8);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 9);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 10);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 11);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 12);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 13);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 14);
+UFS_POWER_DESC_PARAM(active_icc_levels_vccq2, _ACTIVE_LVLS_VCCQ2, 15);
+
+static struct attribute *ufs_sysfs_power_descriptor[] = {
+ &dev_attr_active_icc_levels_vcc0.attr,
+ &dev_attr_active_icc_levels_vcc1.attr,
+ &dev_attr_active_icc_levels_vcc2.attr,
+ &dev_attr_active_icc_levels_vcc3.attr,
+ &dev_attr_active_icc_levels_vcc4.attr,
+ &dev_attr_active_icc_levels_vcc5.attr,
+ &dev_attr_active_icc_levels_vcc6.attr,
+ &dev_attr_active_icc_levels_vcc7.attr,
+ &dev_attr_active_icc_levels_vcc8.attr,
+ &dev_attr_active_icc_levels_vcc9.attr,
+ &dev_attr_active_icc_levels_vcc10.attr,
+ &dev_attr_active_icc_levels_vcc11.attr,
+ &dev_attr_active_icc_levels_vcc12.attr,
+ &dev_attr_active_icc_levels_vcc13.attr,
+ &dev_attr_active_icc_levels_vcc14.attr,
+ &dev_attr_active_icc_levels_vcc15.attr,
+ &dev_attr_active_icc_levels_vccq0.attr,
+ &dev_attr_active_icc_levels_vccq1.attr,
+ &dev_attr_active_icc_levels_vccq2.attr,
+ &dev_attr_active_icc_levels_vccq3.attr,
+ &dev_attr_active_icc_levels_vccq4.attr,
+ &dev_attr_active_icc_levels_vccq5.attr,
+ &dev_attr_active_icc_levels_vccq6.attr,
+ &dev_attr_active_icc_levels_vccq7.attr,
+ &dev_attr_active_icc_levels_vccq8.attr,
+ &dev_attr_active_icc_levels_vccq9.attr,
+ &dev_attr_active_icc_levels_vccq10.attr,
+ &dev_attr_active_icc_levels_vccq11.attr,
+ &dev_attr_active_icc_levels_vccq12.attr,
+ &dev_attr_active_icc_levels_vccq13.attr,
+ &dev_attr_active_icc_levels_vccq14.attr,
+ &dev_attr_active_icc_levels_vccq15.attr,
+ &dev_attr_active_icc_levels_vccq20.attr,
+ &dev_attr_active_icc_levels_vccq21.attr,
+ &dev_attr_active_icc_levels_vccq22.attr,
+ &dev_attr_active_icc_levels_vccq23.attr,
+ &dev_attr_active_icc_levels_vccq24.attr,
+ &dev_attr_active_icc_levels_vccq25.attr,
+ &dev_attr_active_icc_levels_vccq26.attr,
+ &dev_attr_active_icc_levels_vccq27.attr,
+ &dev_attr_active_icc_levels_vccq28.attr,
+ &dev_attr_active_icc_levels_vccq29.attr,
+ &dev_attr_active_icc_levels_vccq210.attr,
+ &dev_attr_active_icc_levels_vccq211.attr,
+ &dev_attr_active_icc_levels_vccq212.attr,
+ &dev_attr_active_icc_levels_vccq213.attr,
+ &dev_attr_active_icc_levels_vccq214.attr,
+ &dev_attr_active_icc_levels_vccq215.attr,
+ NULL,
+};
+
+static const struct attribute_group ufs_sysfs_power_descriptor_group = {
+ .name = "power_descriptor",
+ .attrs = ufs_sysfs_power_descriptor,
+};
+
+#define UFS_STRING_DESCRIPTOR(_name, _pname) \
+static ssize_t _name##_show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ u8 index; \
+ struct ufs_hba *hba = dev_get_drvdata(dev); \
+ int ret; \
+ int desc_len = QUERY_DESC_MAX_SIZE; \
+ u8 *desc_buf; \
+ desc_buf = kzalloc(QUERY_DESC_MAX_SIZE, GFP_ATOMIC); \
+ if (!desc_buf) \
+ return -ENOMEM; \
+ ret = ufshcd_query_descriptor_retry(hba, \
+ UPIU_QUERY_OPCODE_READ_DESC, QUERY_DESC_IDN_DEVICE, \
+ 0, 0, desc_buf, &desc_len); \
+ if (ret) { \
+ ret = -EINVAL; \
+ goto out; \
+ } \
+ index = desc_buf[DEVICE_DESC_PARAM##_pname]; \
+ memset(desc_buf, 0, QUERY_DESC_MAX_SIZE); \
+ if (ufshcd_read_string_desc(hba, index, desc_buf, \
+ QUERY_DESC_MAX_SIZE, true)) { \
+ ret = -EINVAL; \
+ goto out; \
+ } \
+ ret = snprintf(buf, PAGE_SIZE, "%s\n", \
+ desc_buf + QUERY_DESC_HDR_SIZE); \
+out: \
+ kfree(desc_buf); \
+ return ret; \
+} \
+static DEVICE_ATTR_RO(_name)
+
+UFS_STRING_DESCRIPTOR(manufacturer_name, _MANF_NAME);
+UFS_STRING_DESCRIPTOR(product_name, _PRDCT_NAME);
+UFS_STRING_DESCRIPTOR(oem_id, _OEM_ID);
+UFS_STRING_DESCRIPTOR(serial_number, _SN);
+UFS_STRING_DESCRIPTOR(product_revision, _PRDCT_REV);
+
+static struct attribute *ufs_sysfs_string_descriptors[] = {
+ &dev_attr_manufacturer_name.attr,
+ &dev_attr_product_name.attr,
+ &dev_attr_oem_id.attr,
+ &dev_attr_serial_number.attr,
+ &dev_attr_product_revision.attr,
+ NULL,
+};
+
+static const struct attribute_group ufs_sysfs_string_descriptors_group = {
+ .name = "string_descriptors",
+ .attrs = ufs_sysfs_string_descriptors,
+};
+
+#define UFS_FLAG(_name, _uname) \
+static ssize_t _name##_show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ bool flag; \
+ struct ufs_hba *hba = dev_get_drvdata(dev); \
+ if (ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG, \
+ QUERY_FLAG_IDN##_uname, &flag)) \
+ return -EINVAL; \
+ return sprintf(buf, "%s\n", flag ? "true" : "false"); \
+} \
+static DEVICE_ATTR_RO(_name)
+
+UFS_FLAG(device_init, _FDEVICEINIT);
+UFS_FLAG(permanent_wpe, _PERMANENT_WPE);
+UFS_FLAG(power_on_wpe, _PWR_ON_WPE);
+UFS_FLAG(bkops_enable, _BKOPS_EN);
+UFS_FLAG(life_span_mode_enable, _LIFE_SPAN_MODE_ENABLE);
+UFS_FLAG(phy_resource_removal, _FPHYRESOURCEREMOVAL);
+UFS_FLAG(busy_rtc, _BUSY_RTC);
+UFS_FLAG(disable_fw_update, _PERMANENTLY_DISABLE_FW_UPDATE);
+
+static struct attribute *ufs_sysfs_device_flags[] = {
+ &dev_attr_device_init.attr,
+ &dev_attr_permanent_wpe.attr,
+ &dev_attr_power_on_wpe.attr,
+ &dev_attr_bkops_enable.attr,
+ &dev_attr_life_span_mode_enable.attr,
+ &dev_attr_phy_resource_removal.attr,
+ &dev_attr_busy_rtc.attr,
+ &dev_attr_disable_fw_update.attr,
+ NULL,
+};
+
+static const struct attribute_group ufs_sysfs_flags_group = {
+ .name = "flags",
+ .attrs = ufs_sysfs_device_flags,
+};
+
+#define UFS_ATTRIBUTE(_name, _uname) \
+static ssize_t _name##_show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct ufs_hba *hba = dev_get_drvdata(dev); \
+ u32 value; \
+ if (ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR, \
+ QUERY_ATTR_IDN##_uname, 0, 0, &value)) \
+ return -EINVAL; \
+ return sprintf(buf, "0x%08X\n", value); \
+} \
+static DEVICE_ATTR_RO(_name)
+
+UFS_ATTRIBUTE(boot_lun_enabled, _BOOT_LU_EN);
+UFS_ATTRIBUTE(current_power_mode, _POWER_MODE);
+UFS_ATTRIBUTE(active_icc_level, _ACTIVE_ICC_LVL);
+UFS_ATTRIBUTE(ooo_data_enabled, _OOO_DATA_EN);
+UFS_ATTRIBUTE(bkops_status, _BKOPS_STATUS);
+UFS_ATTRIBUTE(purge_status, _PURGE_STATUS);
+UFS_ATTRIBUTE(max_data_in_size, _MAX_DATA_IN);
+UFS_ATTRIBUTE(max_data_out_size, _MAX_DATA_OUT);
+UFS_ATTRIBUTE(reference_clock_frequency, _REF_CLK_FREQ);
+UFS_ATTRIBUTE(configuration_descriptor_lock, _CONF_DESC_LOCK);
+UFS_ATTRIBUTE(max_number_of_rtt, _MAX_NUM_OF_RTT);
+UFS_ATTRIBUTE(exception_event_control, _EE_CONTROL);
+UFS_ATTRIBUTE(exception_event_status, _EE_STATUS);
+UFS_ATTRIBUTE(ffu_status, _FFU_STATUS);
+UFS_ATTRIBUTE(psa_state, _PSA_STATE);
+UFS_ATTRIBUTE(psa_data_size, _PSA_DATA_SIZE);
+
+static struct attribute *ufs_sysfs_attributes[] = {
+ &dev_attr_boot_lun_enabled.attr,
+ &dev_attr_current_power_mode.attr,
+ &dev_attr_active_icc_level.attr,
+ &dev_attr_ooo_data_enabled.attr,
+ &dev_attr_bkops_status.attr,
+ &dev_attr_purge_status.attr,
+ &dev_attr_max_data_in_size.attr,
+ &dev_attr_max_data_out_size.attr,
+ &dev_attr_reference_clock_frequency.attr,
+ &dev_attr_configuration_descriptor_lock.attr,
+ &dev_attr_max_number_of_rtt.attr,
+ &dev_attr_exception_event_control.attr,
+ &dev_attr_exception_event_status.attr,
+ &dev_attr_ffu_status.attr,
+ &dev_attr_psa_state.attr,
+ &dev_attr_psa_data_size.attr,
+ NULL,
+};
+
+static const struct attribute_group ufs_sysfs_attributes_group = {
+ .name = "attributes",
+ .attrs = ufs_sysfs_attributes,
+};
+
+static const struct attribute_group *ufs_sysfs_groups[] = {
+ &ufs_sysfs_default_group,
+ &ufs_sysfs_device_descriptor_group,
+ &ufs_sysfs_interconnect_descriptor_group,
+ &ufs_sysfs_geometry_descriptor_group,
+ &ufs_sysfs_health_descriptor_group,
+ &ufs_sysfs_power_descriptor_group,
+ &ufs_sysfs_string_descriptors_group,
+ &ufs_sysfs_flags_group,
+ &ufs_sysfs_attributes_group,
+ NULL,
+};
+
+#define UFS_LUN_DESC_PARAM(_pname, _puname, _duname, _size) \
+static ssize_t _pname##_show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct scsi_device *sdev = to_scsi_device(dev); \
+ struct ufs_hba *hba = shost_priv(sdev->host); \
+ u8 lun = ufshcd_scsi_to_upiu_lun(sdev->lun); \
+ if (!ufs_is_valid_unit_desc_lun(lun)) \
+ return -EINVAL; \
+ return ufs_sysfs_read_desc_param(hba, QUERY_DESC_IDN_##_duname, \
+ lun, _duname##_DESC_PARAM##_puname, buf, _size); \
+} \
+static DEVICE_ATTR_RO(_pname)
+
+#define UFS_UNIT_DESC_PARAM(_name, _uname, _size) \
+ UFS_LUN_DESC_PARAM(_name, _uname, UNIT, _size)
+
+UFS_UNIT_DESC_PARAM(boot_lun_id, _BOOT_LUN_ID, 1);
+UFS_UNIT_DESC_PARAM(lun_write_protect, _LU_WR_PROTECT, 1);
+UFS_UNIT_DESC_PARAM(lun_queue_depth, _LU_Q_DEPTH, 1);
+UFS_UNIT_DESC_PARAM(psa_sensitive, _PSA_SENSITIVE, 1);
+UFS_UNIT_DESC_PARAM(lun_memory_type, _MEM_TYPE, 1);
+UFS_UNIT_DESC_PARAM(data_reliability, _DATA_RELIABILITY, 1);
+UFS_UNIT_DESC_PARAM(logical_block_size, _LOGICAL_BLK_SIZE, 1);
+UFS_UNIT_DESC_PARAM(logical_block_count, _LOGICAL_BLK_COUNT, 8);
+UFS_UNIT_DESC_PARAM(erase_block_size, _ERASE_BLK_SIZE, 4);
+UFS_UNIT_DESC_PARAM(provisioning_type, _PROVISIONING_TYPE, 1);
+UFS_UNIT_DESC_PARAM(physical_memory_resourse_count, _PHY_MEM_RSRC_CNT, 8);
+UFS_UNIT_DESC_PARAM(context_capabilities, _CTX_CAPABILITIES, 2);
+UFS_UNIT_DESC_PARAM(large_unit_granularity, _LARGE_UNIT_SIZE_M1, 1);
+
+static struct attribute *ufs_sysfs_unit_descriptor[] = {
+ &dev_attr_boot_lun_id.attr,
+ &dev_attr_lun_write_protect.attr,
+ &dev_attr_lun_queue_depth.attr,
+ &dev_attr_psa_sensitive.attr,
+ &dev_attr_lun_memory_type.attr,
+ &dev_attr_data_reliability.attr,
+ &dev_attr_logical_block_size.attr,
+ &dev_attr_logical_block_count.attr,
+ &dev_attr_erase_block_size.attr,
+ &dev_attr_provisioning_type.attr,
+ &dev_attr_physical_memory_resourse_count.attr,
+ &dev_attr_context_capabilities.attr,
+ &dev_attr_large_unit_granularity.attr,
+ NULL,
+};
+
+const struct attribute_group ufs_sysfs_unit_descriptor_group = {
+ .name = "unit_descriptor",
+ .attrs = ufs_sysfs_unit_descriptor,
+};
+
+static ssize_t dyn_cap_needed_attribute_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 value;
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct ufs_hba *hba = shost_priv(sdev->host);
+ u8 lun = ufshcd_scsi_to_upiu_lun(sdev->lun);
+
+ if (ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR,
+ QUERY_ATTR_IDN_DYN_CAP_NEEDED, lun, 0, &value))
+ return -EINVAL;
+ return sprintf(buf, "0x%08X\n", value);
+}
+static DEVICE_ATTR_RO(dyn_cap_needed_attribute);
+
+static struct attribute *ufs_sysfs_lun_attributes[] = {
+ &dev_attr_dyn_cap_needed_attribute.attr,
+ NULL,
+};
+
+const struct attribute_group ufs_sysfs_lun_attributes_group = {
+ .attrs = ufs_sysfs_lun_attributes,
+};
+
+void ufs_sysfs_add_nodes(struct device *dev)
+{
+ int ret;
+
+ ret = sysfs_create_groups(&dev->kobj, ufs_sysfs_groups);
+ if (ret)
+ dev_err(dev,
+ "%s: sysfs groups creation failed (err = %d)\n",
+ __func__, ret);
+}
+
+void ufs_sysfs_remove_nodes(struct device *dev)
+{
+ sysfs_remove_groups(&dev->kobj, ufs_sysfs_groups);
+}
diff --git a/drivers/scsi/ufs/ufs-sysfs.h b/drivers/scsi/ufs/ufs-sysfs.h
new file mode 100644
index 000000000000..e5621e59a432
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-sysfs.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Copyright (C) 2018 Western Digital Corporation
+ */
+
+#ifndef __UFS_SYSFS_H__
+#define __UFS_SYSFS_H__
+
+#include <linux/sysfs.h>
+
+#include "ufshcd.h"
+
+void ufs_sysfs_add_nodes(struct device *dev);
+void ufs_sysfs_remove_nodes(struct device *dev);
+
+extern const struct attribute_group ufs_sysfs_unit_descriptor_group;
+extern const struct attribute_group ufs_sysfs_lun_attributes_group;
+#endif
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 54deeb754db5..14e5bf7af0bb 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -130,17 +130,44 @@ enum {
/* Flag idn for Query Requests*/
enum flag_idn {
- QUERY_FLAG_IDN_FDEVICEINIT = 0x01,
- QUERY_FLAG_IDN_PWR_ON_WPE = 0x03,
- QUERY_FLAG_IDN_BKOPS_EN = 0x04,
+ QUERY_FLAG_IDN_FDEVICEINIT = 0x01,
+ QUERY_FLAG_IDN_PERMANENT_WPE = 0x02,
+ QUERY_FLAG_IDN_PWR_ON_WPE = 0x03,
+ QUERY_FLAG_IDN_BKOPS_EN = 0x04,
+ QUERY_FLAG_IDN_LIFE_SPAN_MODE_ENABLE = 0x05,
+ QUERY_FLAG_IDN_PURGE_ENABLE = 0x06,
+ QUERY_FLAG_IDN_RESERVED2 = 0x07,
+ QUERY_FLAG_IDN_FPHYRESOURCEREMOVAL = 0x08,
+ QUERY_FLAG_IDN_BUSY_RTC = 0x09,
+ QUERY_FLAG_IDN_RESERVED3 = 0x0A,
+ QUERY_FLAG_IDN_PERMANENTLY_DISABLE_FW_UPDATE = 0x0B,
};
/* Attribute idn for Query requests */
enum attr_idn {
- QUERY_ATTR_IDN_ACTIVE_ICC_LVL = 0x03,
- QUERY_ATTR_IDN_BKOPS_STATUS = 0x05,
- QUERY_ATTR_IDN_EE_CONTROL = 0x0D,
- QUERY_ATTR_IDN_EE_STATUS = 0x0E,
+ QUERY_ATTR_IDN_BOOT_LU_EN = 0x00,
+ QUERY_ATTR_IDN_RESERVED = 0x01,
+ QUERY_ATTR_IDN_POWER_MODE = 0x02,
+ QUERY_ATTR_IDN_ACTIVE_ICC_LVL = 0x03,
+ QUERY_ATTR_IDN_OOO_DATA_EN = 0x04,
+ QUERY_ATTR_IDN_BKOPS_STATUS = 0x05,
+ QUERY_ATTR_IDN_PURGE_STATUS = 0x06,
+ QUERY_ATTR_IDN_MAX_DATA_IN = 0x07,
+ QUERY_ATTR_IDN_MAX_DATA_OUT = 0x08,
+ QUERY_ATTR_IDN_DYN_CAP_NEEDED = 0x09,
+ QUERY_ATTR_IDN_REF_CLK_FREQ = 0x0A,
+ QUERY_ATTR_IDN_CONF_DESC_LOCK = 0x0B,
+ QUERY_ATTR_IDN_MAX_NUM_OF_RTT = 0x0C,
+ QUERY_ATTR_IDN_EE_CONTROL = 0x0D,
+ QUERY_ATTR_IDN_EE_STATUS = 0x0E,
+ QUERY_ATTR_IDN_SECONDS_PASSED = 0x0F,
+ QUERY_ATTR_IDN_CNTX_CONF = 0x10,
+ QUERY_ATTR_IDN_CORR_PRG_BLK_NUM = 0x11,
+ QUERY_ATTR_IDN_RESERVED2 = 0x12,
+ QUERY_ATTR_IDN_RESERVED3 = 0x13,
+ QUERY_ATTR_IDN_FFU_STATUS = 0x14,
+ QUERY_ATTR_IDN_PSA_STATE = 0x15,
+ QUERY_ATTR_IDN_PSA_DATA_SIZE = 0x16,
};
/* Descriptor idn for Query requests */
@@ -154,6 +181,7 @@ enum desc_idn {
QUERY_DESC_IDN_RFU_1 = 0x6,
QUERY_DESC_IDN_GEOMETRY = 0x7,
QUERY_DESC_IDN_POWER = 0x8,
+ QUERY_DESC_IDN_HEALTH = 0x9,
QUERY_DESC_IDN_MAX,
};
@@ -169,6 +197,7 @@ enum ufs_desc_def_size {
QUERY_DESC_INTERCONNECT_DEF_SIZE = 0x06,
QUERY_DESC_GEOMETRY_DEF_SIZE = 0x44,
QUERY_DESC_POWER_DEF_SIZE = 0x62,
+ QUERY_DESC_HEALTH_DEF_SIZE = 0x25,
};
/* Unit descriptor parameters offsets in bytes*/
@@ -180,6 +209,7 @@ enum unit_desc_param {
UNIT_DESC_PARAM_BOOT_LUN_ID = 0x4,
UNIT_DESC_PARAM_LU_WR_PROTECT = 0x5,
UNIT_DESC_PARAM_LU_Q_DEPTH = 0x6,
+ UNIT_DESC_PARAM_PSA_SENSITIVE = 0x7,
UNIT_DESC_PARAM_MEM_TYPE = 0x8,
UNIT_DESC_PARAM_DATA_RELIABILITY = 0x9,
UNIT_DESC_PARAM_LOGICAL_BLK_SIZE = 0xA,
@@ -220,6 +250,67 @@ enum device_desc_param {
DEVICE_DESC_PARAM_UD_LEN = 0x1B,
DEVICE_DESC_PARAM_RTT_CAP = 0x1C,
DEVICE_DESC_PARAM_FRQ_RTC = 0x1D,
+ DEVICE_DESC_PARAM_UFS_FEAT = 0x1F,
+ DEVICE_DESC_PARAM_FFU_TMT = 0x20,
+ DEVICE_DESC_PARAM_Q_DPTH = 0x21,
+ DEVICE_DESC_PARAM_DEV_VER = 0x22,
+ DEVICE_DESC_PARAM_NUM_SEC_WPA = 0x24,
+ DEVICE_DESC_PARAM_PSA_MAX_DATA = 0x25,
+ DEVICE_DESC_PARAM_PSA_TMT = 0x29,
+ DEVICE_DESC_PARAM_PRDCT_REV = 0x2A,
+};
+
+/* Interconnect descriptor parameters offsets in bytes*/
+enum interconnect_desc_param {
+ INTERCONNECT_DESC_PARAM_LEN = 0x0,
+ INTERCONNECT_DESC_PARAM_TYPE = 0x1,
+ INTERCONNECT_DESC_PARAM_UNIPRO_VER = 0x2,
+ INTERCONNECT_DESC_PARAM_MPHY_VER = 0x4,
+};
+
+/* Geometry descriptor parameters offsets in bytes*/
+enum geometry_desc_param {
+ GEOMETRY_DESC_PARAM_LEN = 0x0,
+ GEOMETRY_DESC_PARAM_TYPE = 0x1,
+ GEOMETRY_DESC_PARAM_DEV_CAP = 0x4,
+ GEOMETRY_DESC_PARAM_MAX_NUM_LUN = 0xC,
+ GEOMETRY_DESC_PARAM_SEG_SIZE = 0xD,
+ GEOMETRY_DESC_PARAM_ALLOC_UNIT_SIZE = 0x11,
+ GEOMETRY_DESC_PARAM_MIN_BLK_SIZE = 0x12,
+ GEOMETRY_DESC_PARAM_OPT_RD_BLK_SIZE = 0x13,
+ GEOMETRY_DESC_PARAM_OPT_WR_BLK_SIZE = 0x14,
+ GEOMETRY_DESC_PARAM_MAX_IN_BUF_SIZE = 0x15,
+ GEOMETRY_DESC_PARAM_MAX_OUT_BUF_SIZE = 0x16,
+ GEOMETRY_DESC_PARAM_RPMB_RW_SIZE = 0x17,
+ GEOMETRY_DESC_PARAM_DYN_CAP_RSRC_PLC = 0x18,
+ GEOMETRY_DESC_PARAM_DATA_ORDER = 0x19,
+ GEOMETRY_DESC_PARAM_MAX_NUM_CTX = 0x1A,
+ GEOMETRY_DESC_PARAM_TAG_UNIT_SIZE = 0x1B,
+ GEOMETRY_DESC_PARAM_TAG_RSRC_SIZE = 0x1C,
+ GEOMETRY_DESC_PARAM_SEC_RM_TYPES = 0x1D,
+ GEOMETRY_DESC_PARAM_MEM_TYPES = 0x1E,
+ GEOMETRY_DESC_PARAM_SCM_MAX_NUM_UNITS = 0x20,
+ GEOMETRY_DESC_PARAM_SCM_CAP_ADJ_FCTR = 0x24,
+ GEOMETRY_DESC_PARAM_NPM_MAX_NUM_UNITS = 0x26,
+ GEOMETRY_DESC_PARAM_NPM_CAP_ADJ_FCTR = 0x2A,
+ GEOMETRY_DESC_PARAM_ENM1_MAX_NUM_UNITS = 0x2C,
+ GEOMETRY_DESC_PARAM_ENM1_CAP_ADJ_FCTR = 0x30,
+ GEOMETRY_DESC_PARAM_ENM2_MAX_NUM_UNITS = 0x32,
+ GEOMETRY_DESC_PARAM_ENM2_CAP_ADJ_FCTR = 0x36,
+ GEOMETRY_DESC_PARAM_ENM3_MAX_NUM_UNITS = 0x38,
+ GEOMETRY_DESC_PARAM_ENM3_CAP_ADJ_FCTR = 0x3C,
+ GEOMETRY_DESC_PARAM_ENM4_MAX_NUM_UNITS = 0x3E,
+ GEOMETRY_DESC_PARAM_ENM4_CAP_ADJ_FCTR = 0x42,
+ GEOMETRY_DESC_PARAM_OPT_LOG_BLK_SIZE = 0x44,
+};
+
+/* Health descriptor parameters offsets in bytes*/
+enum health_desc_param {
+ HEALTH_DESC_PARAM_LEN = 0x0,
+ HEALTH_DESC_PARAM_TYPE = 0x1,
+ HEALTH_DESC_PARAM_EOL_INFO = 0x2,
+ HEALTH_DESC_PARAM_LIFE_TIME_EST_A = 0x3,
+ HEALTH_DESC_PARAM_LIFE_TIME_EST_B = 0x4,
};
/*
@@ -529,4 +620,14 @@ struct ufs_dev_desc {
char model[MAX_MODEL_LEN + 1];
};
+/**
+ * ufs_is_valid_unit_desc_lun - checks if the given LUN has a unit descriptor
+ * @lun: LU number to check
+ * @return: true if the lun has a matching unit descriptor, false otherwise
+ */
+static inline bool ufs_is_valid_unit_desc_lun(u8 lun)
+{
+ return lun == UFS_UPIU_RPMB_WLUN || (lun < UFS_UPIU_MAX_GENERAL_LUN);
+}
+
#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
index 925b0ec7ec54..ffe6f82182ba 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -75,8 +75,7 @@ static struct ufs_hba_variant_ops ufs_intel_cnl_hba_vops = {
#ifdef CONFIG_PM_SLEEP
/**
* ufshcd_pci_suspend - suspend power management function
- * @pdev: pointer to PCI device handle
- * @state: power state
+ * @dev: pointer to PCI device handle
*
* Returns 0 if successful
* Returns non-zero otherwise
@@ -88,7 +87,7 @@ static int ufshcd_pci_suspend(struct device *dev)
/**
* ufshcd_pci_resume - resume power management function
- * @pdev: pointer to PCI device handle
+ * @dev: pointer to PCI device handle
*
* Returns 0 if successful
* Returns non-zero otherwise
@@ -126,7 +125,7 @@ static void ufshcd_pci_shutdown(struct pci_dev *pdev)
/**
* ufshcd_pci_remove - de-allocate PCI/SCSI host and host memory space
* data structure memory
- * @pdev - pointer to PCI handle
+ * @pdev: pointer to PCI handle
*/
static void ufshcd_pci_remove(struct pci_dev *pdev)
{
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index c7da2c185990..c5b1bf1cadcb 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -41,9 +41,11 @@
#include <linux/devfreq.h>
#include <linux/nls.h>
#include <linux/of.h>
+#include <linux/bitfield.h>
#include "ufshcd.h"
#include "ufs_quirks.h"
#include "unipro.h"
+#include "ufs-sysfs.h"
#define CREATE_TRACE_POINTS
#include <trace/events/ufs.h>
@@ -150,7 +152,7 @@ enum {
#define ufshcd_is_ufs_dev_poweroff(h) \
((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE)
-static struct ufs_pm_lvl_states ufs_pm_lvl_states[] = {
+struct ufs_pm_lvl_states ufs_pm_lvl_states[] = {
{UFS_ACTIVE_PWR_MODE, UIC_LINK_ACTIVE_STATE},
{UFS_ACTIVE_PWR_MODE, UIC_LINK_HIBERN8_STATE},
{UFS_SLEEP_PWR_MODE, UIC_LINK_ACTIVE_STATE},
@@ -523,7 +525,7 @@ int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
/**
* ufshcd_get_intr_mask - Get the interrupt bit mask
- * @hba - Pointer to adapter instance
+ * @hba: Pointer to adapter instance
*
* Returns interrupt bit mask per version
*/
@@ -550,7 +552,7 @@ static inline u32 ufshcd_get_intr_mask(struct ufs_hba *hba)
/**
* ufshcd_get_ufs_version - Get the UFS version supported by the HBA
- * @hba - Pointer to adapter instance
+ * @hba: Pointer to adapter instance
*
* Returns UFSHCI version supported by the controller
*/
@@ -577,7 +579,7 @@ static inline bool ufshcd_is_device_present(struct ufs_hba *hba)
/**
* ufshcd_get_tr_ocs - Get the UTRD Overall Command Status
- * @lrb: pointer to local command reference block
+ * @lrbp: pointer to local command reference block
*
* This function is used to get the OCS field from UTRD
* Returns the OCS field in the UTRD
@@ -813,28 +815,6 @@ static inline bool ufshcd_is_hba_active(struct ufs_hba *hba)
? false : true;
}
-static const char *ufschd_uic_link_state_to_string(
- enum uic_link_state state)
-{
- switch (state) {
- case UIC_LINK_OFF_STATE: return "OFF";
- case UIC_LINK_ACTIVE_STATE: return "ACTIVE";
- case UIC_LINK_HIBERN8_STATE: return "HIBERN8";
- default: return "UNKNOWN";
- }
-}
-
-static const char *ufschd_ufs_dev_pwr_mode_to_string(
- enum ufs_dev_pwr_mode state)
-{
- switch (state) {
- case UFS_ACTIVE_PWR_MODE: return "ACTIVE";
- case UFS_SLEEP_PWR_MODE: return "SLEEP";
- case UFS_POWERDOWN_PWR_MODE: return "POWERDOWN";
- default: return "UNKNOWN";
- }
-}
-
u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba)
{
/* HCI version 1.0 and 1.1 supports UniPro 1.41 */
@@ -1759,7 +1739,7 @@ void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
/**
* ufshcd_copy_sense_data - Copy sense data in case of check condition
- * @lrb - pointer to local reference block
+ * @lrbp: pointer to local reference block
*/
static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp)
{
@@ -1781,7 +1761,7 @@ static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp)
* ufshcd_copy_query_response() - Copy the Query Response and the data
* descriptor
* @hba: per adapter instance
- * @lrb - pointer to local reference block
+ * @lrbp: pointer to local reference block
*/
static
int ufshcd_copy_query_response(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
@@ -1882,7 +1862,7 @@ ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
/**
* ufshcd_wait_for_uic_cmd - Wait complectioin of UIC command
* @hba: per adapter instance
- * @uic_command: UIC command
+ * @uic_cmd: UIC command
*
* Must be called with mutex held.
* Returns 0 only if success.
@@ -1965,7 +1945,8 @@ ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
/**
* ufshcd_map_sg - Map scatter-gather list to prdt
- * @lrbp - pointer to local reference block
+ * @hba: per adapter instance
+ * @lrbp: pointer to local reference block
*
* Returns 0 in case of success, non-zero value in case of failure
*/
@@ -2101,8 +2082,8 @@ static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp,
/**
* ufshcd_prepare_utp_scsi_cmd_upiu() - fills the utp_transfer_req_desc,
* for scsi commands
- * @lrbp - local reference block pointer
- * @upiu_flags - flags
+ * @lrbp: local reference block pointer
+ * @upiu_flags: flags
*/
static
void ufshcd_prepare_utp_scsi_cmd_upiu(struct ufshcd_lrb *lrbp, u32 upiu_flags)
@@ -2190,8 +2171,8 @@ static inline void ufshcd_prepare_utp_nop_upiu(struct ufshcd_lrb *lrbp)
/**
* ufshcd_comp_devman_upiu - UFS Protocol Information Unit(UPIU)
* for Device Management Purposes
- * @hba - per adapter instance
- * @lrb - pointer to local reference block
+ * @hba: per adapter instance
+ * @lrbp: pointer to local reference block
*/
static int ufshcd_comp_devman_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
{
@@ -2218,8 +2199,8 @@ static int ufshcd_comp_devman_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
/**
* ufshcd_comp_scsi_upiu - UFS Protocol Information Unit(UPIU)
* for SCSI Purposes
- * @hba - per adapter instance
- * @lrb - pointer to local reference block
+ * @hba: per adapter instance
+ * @lrbp: pointer to local reference block
*/
static int ufshcd_comp_scsi_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
{
@@ -2243,24 +2224,9 @@ static int ufshcd_comp_scsi_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
return ret;
}
-/*
- * ufshcd_scsi_to_upiu_lun - maps scsi LUN to UPIU LUN
- * @scsi_lun: scsi LUN id
- *
- * Returns UPIU LUN id
- */
-static inline u8 ufshcd_scsi_to_upiu_lun(unsigned int scsi_lun)
-{
- if (scsi_is_wlun(scsi_lun))
- return (scsi_lun & UFS_UPIU_MAX_UNIT_NUM_ID)
- | UFS_UPIU_WLUN_ID;
- else
- return scsi_lun & UFS_UPIU_MAX_UNIT_NUM_ID;
-}
-
/**
* ufshcd_upiu_wlun_to_scsi_wlun - maps UPIU W-LUN id to SCSI W-LUN ID
- * @scsi_lun: UPIU W-LUN id
+ * @upiu_wlun_id: UPIU W-LUN id
*
* Returns SCSI W-LUN id
*/
@@ -2271,8 +2237,8 @@ static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id)
/**
* ufshcd_queuecommand - main entry point for SCSI requests
+ * @host: SCSI host pointer
* @cmd: command from SCSI Midlayer
- * @done: call back function
*
* Returns 0 for success, non-zero in case of failure
*/
@@ -2513,7 +2479,7 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba,
/**
* ufshcd_get_dev_cmd_tag - Get device management command tag
* @hba: per-adapter instance
- * @tag: pointer to variable with available slot value
+ * @tag_out: pointer to variable with available slot value
*
* Get a free slot and lock it until device management command
* completes.
@@ -2550,9 +2516,9 @@ static inline void ufshcd_put_dev_cmd_tag(struct ufs_hba *hba, int tag)
/**
* ufshcd_exec_dev_cmd - API for sending device management requests
- * @hba - UFS hba
- * @cmd_type - specifies the type (NOP, Query...)
- * @timeout - time in seconds
+ * @hba: UFS hba
+ * @cmd_type: specifies the type (NOP, Query...)
+ * @timeout: time in seconds
*
* NOTE: Since there is only one available tag for device management commands,
* it is expected you hold the hba->dev_cmd.lock mutex.
@@ -2649,10 +2615,10 @@ static int ufshcd_query_flag_retry(struct ufs_hba *hba,
/**
* ufshcd_query_flag() - API function for sending flag query requests
- * hba: per-adapter instance
- * query_opcode: flag query to perform
- * idn: flag idn to access
- * flag_res: the flag value after the query request completes
+ * @hba: per-adapter instance
+ * @opcode: flag query to perform
+ * @idn: flag idn to access
+ * @flag_res: the flag value after the query request completes
*
* Returns 0 for success, non-zero in case of failure
*/
@@ -2716,17 +2682,17 @@ out_unlock:
/**
* ufshcd_query_attr - API function for sending attribute requests
- * hba: per-adapter instance
- * opcode: attribute opcode
- * idn: attribute idn to access
- * index: index field
- * selector: selector field
- * attr_val: the attribute value after the query request completes
+ * @hba: per-adapter instance
+ * @opcode: attribute opcode
+ * @idn: attribute idn to access
+ * @index: index field
+ * @selector: selector field
+ * @attr_val: the attribute value after the query request completes
*
* Returns 0 for success, non-zero in case of failure
*/
-static int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode,
- enum attr_idn idn, u8 index, u8 selector, u32 *attr_val)
+int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode,
+ enum attr_idn idn, u8 index, u8 selector, u32 *attr_val)
{
struct ufs_query_req *request = NULL;
struct ufs_query_res *response = NULL;
@@ -2880,25 +2846,24 @@ out:
}
/**
- * ufshcd_query_descriptor_retry - API function for sending descriptor
- * requests
- * hba: per-adapter instance
- * opcode: attribute opcode
- * idn: attribute idn to access
- * index: index field
- * selector: selector field
- * desc_buf: the buffer that contains the descriptor
- * buf_len: length parameter passed to the device
+ * ufshcd_query_descriptor_retry - API function for sending descriptor requests
+ * @hba: per-adapter instance
+ * @opcode: attribute opcode
+ * @idn: attribute idn to access
+ * @index: index field
+ * @selector: selector field
+ * @desc_buf: the buffer that contains the descriptor
+ * @buf_len: length parameter passed to the device
*
* Returns 0 for success, non-zero in case of failure.
* The buf_len parameter will contain, on return, the length parameter
* received on the response.
*/
-static int ufshcd_query_descriptor_retry(struct ufs_hba *hba,
- enum query_opcode opcode,
- enum desc_idn idn, u8 index,
- u8 selector,
- u8 *desc_buf, int *buf_len)
+int ufshcd_query_descriptor_retry(struct ufs_hba *hba,
+ enum query_opcode opcode,
+ enum desc_idn idn, u8 index,
+ u8 selector,
+ u8 *desc_buf, int *buf_len)
{
int err;
int retries;
@@ -2987,6 +2952,9 @@ int ufshcd_map_desc_id_to_length(struct ufs_hba *hba,
case QUERY_DESC_IDN_STRING:
*desc_len = QUERY_DESC_MAX_SIZE;
break;
+ case QUERY_DESC_IDN_HEALTH:
+ *desc_len = hba->desc_size.hlth_desc;
+ break;
case QUERY_DESC_IDN_RFU_0:
case QUERY_DESC_IDN_RFU_1:
*desc_len = 0;
@@ -3010,12 +2978,12 @@ EXPORT_SYMBOL(ufshcd_map_desc_id_to_length);
*
* Return 0 in case of success, non-zero otherwise
*/
-static int ufshcd_read_desc_param(struct ufs_hba *hba,
- enum desc_idn desc_id,
- int desc_index,
- u8 param_offset,
- u8 *param_read_buf,
- u8 param_size)
+int ufshcd_read_desc_param(struct ufs_hba *hba,
+ enum desc_idn desc_id,
+ int desc_index,
+ u8 param_offset,
+ u8 *param_read_buf,
+ u8 param_size)
{
int ret;
u8 *desc_buf;
@@ -3110,9 +3078,8 @@ static int ufshcd_read_device_desc(struct ufs_hba *hba, u8 *buf, u32 size)
*
* Return 0 in case of success, non-zero otherwise
*/
-#define ASCII_STD true
-static int ufshcd_read_string_desc(struct ufs_hba *hba, int desc_index,
- u8 *buf, u32 size, bool ascii)
+int ufshcd_read_string_desc(struct ufs_hba *hba, int desc_index,
+ u8 *buf, u32 size, bool ascii)
{
int err = 0;
@@ -3189,7 +3156,7 @@ static inline int ufshcd_read_unit_desc_param(struct ufs_hba *hba,
* Unit descriptors are only available for general purpose LUs (LUN id
* from 0 to 7) and RPMB Well known LU.
*/
- if (lun != UFS_UPIU_RPMB_WLUN && (lun >= UFS_UPIU_MAX_GENERAL_LUN))
+ if (!ufs_is_valid_unit_desc_lun(lun))
return -EOPNOTSUPP;
return ufshcd_read_desc_param(hba, QUERY_DESC_IDN_UNIT, lun,
@@ -3742,6 +3709,18 @@ static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba)
return ret;
}
+static void ufshcd_auto_hibern8_enable(struct ufs_hba *hba)
+{
+ unsigned long flags;
+
+ if (!(hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) || !hba->ahit)
+ return;
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ ufshcd_writel(hba, hba->ahit, REG_AUTO_HIBERNATE_IDLE_TIMER);
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+}
+
/**
* ufshcd_init_pwr_info - setting the POR (power on reset)
* values in hba power info
@@ -3912,7 +3891,7 @@ static int ufshcd_config_pwr_mode(struct ufs_hba *hba,
/**
* ufshcd_complete_dev_init() - checks device readiness
- * hba: per-adapter instance
+ * @hba: per-adapter instance
*
* Set fDeviceInit flag and poll until device toggles it.
*/
@@ -4453,7 +4432,7 @@ static int ufshcd_task_req_compl(struct ufs_hba *hba, u32 index, u8 *resp)
/**
* ufshcd_scsi_cmd_status - Update SCSI command result based on SCSI status
- * @lrb: pointer to local reference block of completed command
+ * @lrbp: pointer to local reference block of completed command
* @scsi_status: SCSI command status
*
* Returns value base on SCSI command status
@@ -4488,7 +4467,7 @@ ufshcd_scsi_cmd_status(struct ufshcd_lrb *lrbp, int scsi_status)
/**
* ufshcd_transfer_rsp_status - Get overall status of the response
* @hba: per adapter instance
- * @lrb: pointer to local reference block of completed command
+ * @lrbp: pointer to local reference block of completed command
*
* Returns result of the command to notify SCSI midlayer
*/
@@ -5796,7 +5775,7 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba)
/**
* ufshcd_eh_host_reset_handler - host reset handler registered to scsi layer
- * @cmd - SCSI command pointer
+ * @cmd: SCSI command pointer
*
* Returns SUCCESS/FAILED
*/
@@ -5981,11 +5960,11 @@ static void ufshcd_init_icc_levels(struct ufs_hba *hba)
* will take effect only when its sent to "UFS device" well known logical unit
* hence we require the scsi_device instance to represent this logical unit in
* order for the UFS host driver to send the SSU command for power management.
-
+ *
* We also require the scsi_device instance for "RPMB" (Replay Protected Memory
* Block) LU so user space process can control this LU. User space may also
* want to have access to BOOT LU.
-
+ *
* This function adds scsi device instances for each of all well known LUs
* (except "REPORT LUNS" LU).
*
@@ -6054,7 +6033,7 @@ static int ufs_get_device_desc(struct ufs_hba *hba,
model_index = desc_buf[DEVICE_DESC_PARAM_PRDCT_NAME];
err = ufshcd_read_string_desc(hba, model_index, str_desc_buf,
- QUERY_DESC_MAX_SIZE, ASCII_STD);
+ QUERY_DESC_MAX_SIZE, true/*ASCII*/);
if (err) {
dev_err(hba->dev, "%s: Failed reading Product Name. err = %d\n",
__func__, err);
@@ -6300,6 +6279,10 @@ static void ufshcd_init_desc_sizes(struct ufs_hba *hba)
&hba->desc_size.geom_desc);
if (err)
hba->desc_size.geom_desc = QUERY_DESC_GEOMETRY_DEF_SIZE;
+ err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_HEALTH, 0,
+ &hba->desc_size.hlth_desc);
+ if (err)
+ hba->desc_size.hlth_desc = QUERY_DESC_HEALTH_DEF_SIZE;
}
static void ufshcd_def_desc_sizes(struct ufs_hba *hba)
@@ -6310,6 +6293,7 @@ static void ufshcd_def_desc_sizes(struct ufs_hba *hba)
hba->desc_size.conf_desc = QUERY_DESC_CONFIGURATION_DEF_SIZE;
hba->desc_size.unit_desc = QUERY_DESC_UNIT_DEF_SIZE;
hba->desc_size.geom_desc = QUERY_DESC_GEOMETRY_DEF_SIZE;
+ hba->desc_size.hlth_desc = QUERY_DESC_HEALTH_DEF_SIZE;
}
/**
@@ -6338,6 +6322,9 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
/* UniPro link is active now */
ufshcd_set_link_active(hba);
+ /* Enable Auto-Hibernate if configured */
+ ufshcd_auto_hibern8_enable(hba);
+
ret = ufshcd_verify_dev_init(hba);
if (ret)
goto out;
@@ -6496,6 +6483,12 @@ static enum blk_eh_timer_return ufshcd_eh_timed_out(struct scsi_cmnd *scmd)
return found ? BLK_EH_NOT_HANDLED : BLK_EH_RESET_TIMER;
}
+static const struct attribute_group *ufshcd_driver_groups[] = {
+ &ufs_sysfs_unit_descriptor_group,
+ &ufs_sysfs_lun_attributes_group,
+ NULL,
+};
+
static struct scsi_host_template ufshcd_driver_template = {
.module = THIS_MODULE,
.name = UFSHCD,
@@ -6515,6 +6508,7 @@ static struct scsi_host_template ufshcd_driver_template = {
.can_queue = UFSHCD_CAN_QUEUE,
.max_host_blocked = 1,
.track_queue_depth = 1,
+ .sdev_groups = ufshcd_driver_groups,
};
static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg,
@@ -7415,6 +7409,10 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
/* Schedule clock gating in case of no access to UFS device yet */
ufshcd_release(hba);
+
+ /* Enable Auto-Hibernate if configured */
+ ufshcd_auto_hibern8_enable(hba);
+
goto out;
set_old_link_state:
@@ -7436,7 +7434,6 @@ out:
/**
* ufshcd_system_suspend - system suspend routine
* @hba: per adapter instance
- * @pm_op: runtime PM or system PM
*
* Check the description of ufshcd_suspend() function for more details.
*
@@ -7587,133 +7584,6 @@ int ufshcd_runtime_idle(struct ufs_hba *hba)
}
EXPORT_SYMBOL(ufshcd_runtime_idle);
-static inline ssize_t ufshcd_pm_lvl_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count,
- bool rpm)
-{
- struct ufs_hba *hba = dev_get_drvdata(dev);
- unsigned long flags, value;
-
- if (kstrtoul(buf, 0, &value))
- return -EINVAL;
-
- if (value >= UFS_PM_LVL_MAX)
- return -EINVAL;
-
- spin_lock_irqsave(hba->host->host_lock, flags);
- if (rpm)
- hba->rpm_lvl = value;
- else
- hba->spm_lvl = value;
- spin_unlock_irqrestore(hba->host->host_lock, flags);
- return count;
-}
-
-static ssize_t ufshcd_rpm_lvl_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct ufs_hba *hba = dev_get_drvdata(dev);
- int curr_len;
- u8 lvl;
-
- curr_len = snprintf(buf, PAGE_SIZE,
- "\nCurrent Runtime PM level [%d] => dev_state [%s] link_state [%s]\n",
- hba->rpm_lvl,
- ufschd_ufs_dev_pwr_mode_to_string(
- ufs_pm_lvl_states[hba->rpm_lvl].dev_state),
- ufschd_uic_link_state_to_string(
- ufs_pm_lvl_states[hba->rpm_lvl].link_state));
-
- curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
- "\nAll available Runtime PM levels info:\n");
- for (lvl = UFS_PM_LVL_0; lvl < UFS_PM_LVL_MAX; lvl++)
- curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
- "\tRuntime PM level [%d] => dev_state [%s] link_state [%s]\n",
- lvl,
- ufschd_ufs_dev_pwr_mode_to_string(
- ufs_pm_lvl_states[lvl].dev_state),
- ufschd_uic_link_state_to_string(
- ufs_pm_lvl_states[lvl].link_state));
-
- return curr_len;
-}
-
-static ssize_t ufshcd_rpm_lvl_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- return ufshcd_pm_lvl_store(dev, attr, buf, count, true);
-}
-
-static void ufshcd_add_rpm_lvl_sysfs_nodes(struct ufs_hba *hba)
-{
- hba->rpm_lvl_attr.show = ufshcd_rpm_lvl_show;
- hba->rpm_lvl_attr.store = ufshcd_rpm_lvl_store;
- sysfs_attr_init(&hba->rpm_lvl_attr.attr);
- hba->rpm_lvl_attr.attr.name = "rpm_lvl";
- hba->rpm_lvl_attr.attr.mode = 0644;
- if (device_create_file(hba->dev, &hba->rpm_lvl_attr))
- dev_err(hba->dev, "Failed to create sysfs for rpm_lvl\n");
-}
-
-static ssize_t ufshcd_spm_lvl_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct ufs_hba *hba = dev_get_drvdata(dev);
- int curr_len;
- u8 lvl;
-
- curr_len = snprintf(buf, PAGE_SIZE,
- "\nCurrent System PM level [%d] => dev_state [%s] link_state [%s]\n",
- hba->spm_lvl,
- ufschd_ufs_dev_pwr_mode_to_string(
- ufs_pm_lvl_states[hba->spm_lvl].dev_state),
- ufschd_uic_link_state_to_string(
- ufs_pm_lvl_states[hba->spm_lvl].link_state));
-
- curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
- "\nAll available System PM levels info:\n");
- for (lvl = UFS_PM_LVL_0; lvl < UFS_PM_LVL_MAX; lvl++)
- curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
- "\tSystem PM level [%d] => dev_state [%s] link_state [%s]\n",
- lvl,
- ufschd_ufs_dev_pwr_mode_to_string(
- ufs_pm_lvl_states[lvl].dev_state),
- ufschd_uic_link_state_to_string(
- ufs_pm_lvl_states[lvl].link_state));
-
- return curr_len;
-}
-
-static ssize_t ufshcd_spm_lvl_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- return ufshcd_pm_lvl_store(dev, attr, buf, count, false);
-}
-
-static void ufshcd_add_spm_lvl_sysfs_nodes(struct ufs_hba *hba)
-{
- hba->spm_lvl_attr.show = ufshcd_spm_lvl_show;
- hba->spm_lvl_attr.store = ufshcd_spm_lvl_store;
- sysfs_attr_init(&hba->spm_lvl_attr.attr);
- hba->spm_lvl_attr.attr.name = "spm_lvl";
- hba->spm_lvl_attr.attr.mode = 0644;
- if (device_create_file(hba->dev, &hba->spm_lvl_attr))
- dev_err(hba->dev, "Failed to create sysfs for spm_lvl\n");
-}
-
-static inline void ufshcd_add_sysfs_nodes(struct ufs_hba *hba)
-{
- ufshcd_add_rpm_lvl_sysfs_nodes(hba);
- ufshcd_add_spm_lvl_sysfs_nodes(hba);
-}
-
-static inline void ufshcd_remove_sysfs_nodes(struct ufs_hba *hba)
-{
- device_remove_file(hba->dev, &hba->rpm_lvl_attr);
- device_remove_file(hba->dev, &hba->spm_lvl_attr);
-}
-
/**
* ufshcd_shutdown - shutdown routine
* @hba: per adapter instance
@@ -7747,11 +7617,11 @@ EXPORT_SYMBOL(ufshcd_shutdown);
/**
* ufshcd_remove - de-allocate SCSI host and host memory space
* data structure memory
- * @hba - per adapter instance
+ * @hba: per adapter instance
*/
void ufshcd_remove(struct ufs_hba *hba)
{
- ufshcd_remove_sysfs_nodes(hba);
+ ufs_sysfs_remove_nodes(hba->dev);
scsi_remove_host(hba->host);
/* disable interrupts */
ufshcd_disable_intr(hba, hba->intr_mask);
@@ -7986,6 +7856,12 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
UFS_SLEEP_PWR_MODE,
UIC_LINK_HIBERN8_STATE);
+ /* Set the default auto-hiberate idle timer value to 150 ms */
+ if (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) {
+ hba->ahit = FIELD_PREP(UFSHCI_AHIBERN8_TIMER_MASK, 150) |
+ FIELD_PREP(UFSHCI_AHIBERN8_SCALE_MASK, 3);
+ }
+
/* Hold auto suspend until async scan completes */
pm_runtime_get_sync(dev);
@@ -7998,7 +7874,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
ufshcd_set_ufs_dev_active(hba);
async_schedule(ufshcd_async_scan, hba);
- ufshcd_add_sysfs_nodes(hba);
+ ufs_sysfs_add_nodes(hba->dev);
return 0;
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 1332e544da92..8110dcd04d22 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -229,6 +229,7 @@ struct ufs_desc_size {
int interc_desc;
int unit_desc;
int conf_desc;
+ int hlth_desc;
};
/**
@@ -530,6 +531,9 @@ struct ufs_hba {
struct device_attribute spm_lvl_attr;
int pm_op_in_progress;
+ /* Auto-Hibernate Idle Timer register value */
+ u32 ahit;
+
struct ufshcd_lrb *lrb;
unsigned long lrb_in_use;
@@ -841,8 +845,24 @@ static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info)
}
/* Expose Query-Request API */
+int ufshcd_query_descriptor_retry(struct ufs_hba *hba,
+ enum query_opcode opcode,
+ enum desc_idn idn, u8 index,
+ u8 selector,
+ u8 *desc_buf, int *buf_len);
+int ufshcd_read_desc_param(struct ufs_hba *hba,
+ enum desc_idn desc_id,
+ int desc_index,
+ u8 param_offset,
+ u8 *param_read_buf,
+ u8 param_size);
+int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode,
+ enum attr_idn idn, u8 index, u8 selector, u32 *attr_val);
int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
enum flag_idn idn, bool *flag_res);
+int ufshcd_read_string_desc(struct ufs_hba *hba, int desc_index,
+ u8 *buf, u32 size, bool ascii);
+
int ufshcd_hold(struct ufs_hba *hba, bool async);
void ufshcd_release(struct ufs_hba *hba);
@@ -985,4 +1005,21 @@ static inline void ufshcd_vops_dbg_register_dump(struct ufs_hba *hba)
hba->vops->dbg_register_dump(hba);
}
+extern struct ufs_pm_lvl_states ufs_pm_lvl_states[];
+
+/*
+ * ufshcd_scsi_to_upiu_lun - maps scsi LUN to UPIU LUN
+ * @scsi_lun: scsi LUN id
+ *
+ * Returns UPIU LUN id
+ */
+static inline u8 ufshcd_scsi_to_upiu_lun(unsigned int scsi_lun)
+{
+ if (scsi_is_wlun(scsi_lun))
+ return (scsi_lun & UFS_UPIU_MAX_UNIT_NUM_ID)
+ | UFS_UPIU_WLUN_ID;
+ else
+ return scsi_lun & UFS_UPIU_MAX_UNIT_NUM_ID;
+}
+
#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index 1a1b5d9fe514..bb5d9c7f3353 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -86,6 +86,7 @@ enum {
enum {
MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F,
MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000,
+ MASK_AUTO_HIBERN8_SUPPORT = 0x00800000,
MASK_64_ADDRESSING_SUPPORT = 0x01000000,
MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000,
MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000,
@@ -119,6 +120,12 @@ enum {
#define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0)
#define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16)
+/* AHIT - Auto-Hibernate Idle Timer */
+#define UFSHCI_AHIBERN8_TIMER_MASK GENMASK(9, 0)
+#define UFSHCI_AHIBERN8_SCALE_MASK GENMASK(12, 10)
+#define UFSHCI_AHIBERN8_SCALE_FACTOR 10
+#define UFSHCI_AHIBERN8_MAX (1023 * 100000)
+
/*
* IS - Interrupt Status - 20h
*/
diff --git a/include/linux/raid_class.h b/include/linux/raid_class.h
index 31e1ff69efc8..ec8655514283 100644
--- a/include/linux/raid_class.h
+++ b/include/linux/raid_class.h
@@ -38,6 +38,7 @@ enum raid_level {
RAID_LEVEL_5,
RAID_LEVEL_50,
RAID_LEVEL_6,
+ RAID_LEVEL_JBOD,
};
struct raid_data {
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index cb85eddb47ea..eb7853c1a23b 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -47,6 +47,8 @@ static inline int scsi_status_is_good(int status)
*/
status &= 0xfe;
return ((status == SAM_STAT_GOOD) ||
+ (status == SAM_STAT_CONDITION_MET) ||
+ /* Next two "intermediate" statuses are obsolete in SAM-4 */
(status == SAM_STAT_INTERMEDIATE) ||
(status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
/* FIXME: this is obsolete in SAM-3 */
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 9c1e4bad6581..12f454cb6f61 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -52,21 +52,6 @@ struct scsi_host_template {
const char *name;
/*
- * Used to initialize old-style drivers. For new-style drivers
- * just perform all work in your module initialization function.
- *
- * Status: OBSOLETE
- */
- int (* detect)(struct scsi_host_template *);
-
- /*
- * Used as unload callback for hosts with old-style drivers.
- *
- * Status: OBSOLETE
- */
- int (* release)(struct Scsi_Host *);
-
- /*
* The info function will return whatever useful information the
* developer sees fit. If not provided, then the name field will
* be used instead.
@@ -480,13 +465,10 @@ struct scsi_host_template {
struct device_attribute **sdev_attrs;
/*
- * List of hosts per template.
- *
- * This is only for use by scsi_module.c for legacy templates.
- * For these access to it is synchronized implicitly by
- * module_init/module_exit.
+ * Pointer to the SCSI device attribute groups for this host,
+ * NULL terminated.
*/
- struct list_head legacy_hosts;
+ const struct attribute_group **sdev_groups;
/*
* Vendor Identifier associated with the host
@@ -709,15 +691,6 @@ struct Scsi_Host {
struct device shost_gendev, shost_dev;
/*
- * List of hosts per template.
- *
- * This is only for use by scsi_module.c for legacy templates.
- * For these access to it is synchronized implicitly by
- * module_init/module_exit.
- */
- struct list_head sht_legacy_list;
-
- /*
* Points to the transport data (if any) which is allocated
* separately
*/
@@ -917,9 +890,6 @@ static inline unsigned char scsi_host_get_guard(struct Scsi_Host *shost)
return shost->prot_guard_type;
}
-/* legacy interfaces */
-extern struct Scsi_Host *scsi_register(struct scsi_host_template *, int);
-extern void scsi_unregister(struct Scsi_Host *);
extern int scsi_host_set_state(struct Scsi_Host *, enum scsi_host_state);
#endif /* _SCSI_SCSI_HOST_H */