diff options
| -rw-r--r-- | drivers/tty/serial/imx.c | 4 | ||||
| -rw-r--r-- | drivers/tty/serial/serial_core.c | 26 | ||||
| -rw-r--r-- | drivers/tty/serial/stm32-usart.c | 8 |
3 files changed, 26 insertions, 12 deletions
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index a0fcf18cbeac..8b7d9c5a7455 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1948,10 +1948,6 @@ static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termio rs485conf->flags & SER_RS485_RX_DURING_TX) imx_uart_start_rx(port); - if (port->rs485_rx_during_tx_gpio) - gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, - !!(rs485conf->flags & SER_RS485_RX_DURING_TX)); - return 0; } diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index cc866da50b81..8d381c283cec 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1407,6 +1407,16 @@ static void uart_set_rs485_termination(struct uart_port *port, !!(rs485->flags & SER_RS485_TERMINATE_BUS)); } +static void uart_set_rs485_rx_during_tx(struct uart_port *port, + const struct serial_rs485 *rs485) +{ + if (!(rs485->flags & SER_RS485_ENABLED)) + return; + + gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, + !!(rs485->flags & SER_RS485_RX_DURING_TX)); +} + static int uart_rs485_config(struct uart_port *port) { struct serial_rs485 *rs485 = &port->rs485; @@ -1418,12 +1428,17 @@ static int uart_rs485_config(struct uart_port *port) uart_sanitize_serial_rs485(port, rs485); uart_set_rs485_termination(port, rs485); + uart_set_rs485_rx_during_tx(port, rs485); uart_port_lock_irqsave(port, &flags); ret = port->rs485_config(port, NULL, rs485); uart_port_unlock_irqrestore(port, flags); - if (ret) + if (ret) { memset(rs485, 0, sizeof(*rs485)); + /* unset GPIOs */ + gpiod_set_value_cansleep(port->rs485_term_gpio, 0); + gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, 0); + } return ret; } @@ -1462,6 +1477,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, return ret; uart_sanitize_serial_rs485(port, &rs485); uart_set_rs485_termination(port, &rs485); + uart_set_rs485_rx_during_tx(port, &rs485); uart_port_lock_irqsave(port, &flags); ret = port->rs485_config(port, &tty->termios, &rs485); @@ -1473,8 +1489,14 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, port->ops->set_mctrl(port, port->mctrl); } uart_port_unlock_irqrestore(port, flags); - if (ret) + if (ret) { + /* restore old GPIO settings */ + gpiod_set_value_cansleep(port->rs485_term_gpio, + !!(port->rs485.flags & SER_RS485_TERMINATE_BUS)); + gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, + !!(port->rs485.flags & SER_RS485_RX_DURING_TX)); return ret; + } if (copy_to_user(rs485_user, &port->rs485, sizeof(port->rs485))) return -EFAULT; diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 9781c143def2..794b77512740 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -226,12 +226,6 @@ static int stm32_usart_config_rs485(struct uart_port *port, struct ktermios *ter stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); - if (port->rs485_rx_during_tx_gpio) - gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, - !!(rs485conf->flags & SER_RS485_RX_DURING_TX)); - else - rs485conf->flags |= SER_RS485_RX_DURING_TX; - if (rs485conf->flags & SER_RS485_ENABLED) { cr1 = readl_relaxed(port->membase + ofs->cr1); cr3 = readl_relaxed(port->membase + ofs->cr3); @@ -256,6 +250,8 @@ static int stm32_usart_config_rs485(struct uart_port *port, struct ktermios *ter writel_relaxed(cr3, port->membase + ofs->cr3); writel_relaxed(cr1, port->membase + ofs->cr1); + + rs485conf->flags |= SER_RS485_RX_DURING_TX; } else { stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DEM | USART_CR3_DEP); |