diff options
| -rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_register.h | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 44 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h | 1 |
3 files changed, 46 insertions, 2 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h index 8d0588a27a05..1908eed4fa5e 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_register.h +++ b/drivers/net/ethernet/intel/i40e/i40e_register.h @@ -413,6 +413,9 @@ #define I40E_VFINT_DYN_CTLN(_INTVF) (0x00024800 + ((_INTVF) * 4)) /* _i=0...511 */ /* Reset: VFR */ #define I40E_VFINT_DYN_CTLN_CLEARPBA_SHIFT 1 #define I40E_VFINT_DYN_CTLN_CLEARPBA_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTLN_CLEARPBA_SHIFT) +#define I40E_VFINT_ICR0_ADMINQ_SHIFT 30 +#define I40E_VFINT_ICR0_ADMINQ_MASK I40E_MASK(0x1, I40E_VFINT_ICR0_ADMINQ_SHIFT) +#define I40E_VFINT_ICR0_ENA(_VF) (0x0002C000 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */ #define I40E_VPINT_AEQCTL(_VF) (0x0002B800 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */ #define I40E_VPINT_AEQCTL_MSIX_INDX_SHIFT 0 #define I40E_VPINT_AEQCTL_ITR_INDX_SHIFT 11 diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 7dd2a2bab339..dfdb6e786461 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -1377,6 +1377,32 @@ static i40e_status i40e_config_vf_promiscuous_mode(struct i40e_vf *vf, } /** + * i40e_sync_vfr_reset + * @hw: pointer to hw struct + * @vf_id: VF identifier + * + * Before trigger hardware reset, we need to know if no other process has + * reserved the hardware for any reset operations. This check is done by + * examining the status of the RSTAT1 register used to signal the reset. + **/ +static int i40e_sync_vfr_reset(struct i40e_hw *hw, int vf_id) +{ + u32 reg; + int i; + + for (i = 0; i < I40E_VFR_WAIT_COUNT; i++) { + reg = rd32(hw, I40E_VFINT_ICR0_ENA(vf_id)) & + I40E_VFINT_ICR0_ADMINQ_MASK; + if (reg) + return 0; + + usleep_range(100, 200); + } + + return -EAGAIN; +} + +/** * i40e_trigger_vf_reset * @vf: pointer to the VF structure * @flr: VFLR was issued or not @@ -1390,9 +1416,11 @@ static void i40e_trigger_vf_reset(struct i40e_vf *vf, bool flr) struct i40e_pf *pf = vf->pf; struct i40e_hw *hw = &pf->hw; u32 reg, reg_idx, bit_idx; + bool vf_active; + u32 radq; /* warn the VF */ - clear_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states); + vf_active = test_and_clear_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states); /* Disable VF's configuration API during reset. The flag is re-enabled * in i40e_alloc_vf_res(), when it's safe again to access VF's VSI. @@ -1406,7 +1434,19 @@ static void i40e_trigger_vf_reset(struct i40e_vf *vf, bool flr) * just need to clean up, so don't hit the VFRTRIG register. */ if (!flr) { - /* reset VF using VPGEN_VFRTRIG reg */ + /* Sync VFR reset before trigger next one */ + radq = rd32(hw, I40E_VFINT_ICR0_ENA(vf->vf_id)) & + I40E_VFINT_ICR0_ADMINQ_MASK; + if (vf_active && !radq) + /* waiting for finish reset by virtual driver */ + if (i40e_sync_vfr_reset(hw, vf->vf_id)) + dev_info(&pf->pdev->dev, + "Reset VF %d never finished\n", + vf->vf_id); + + /* Reset VF using VPGEN_VFRTRIG reg. It is also setting + * in progress state in rstat1 register. + */ reg = rd32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id)); reg |= I40E_VPGEN_VFRTRIG_VFSWR_MASK; wr32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id), reg); diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h index 49575a640a84..03c42fd0fea1 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h @@ -19,6 +19,7 @@ #define I40E_MAX_VF_PROMISC_FLAGS 3 #define I40E_VF_STATE_WAIT_COUNT 20 +#define I40E_VFR_WAIT_COUNT 100 /* Various queue ctrls */ enum i40e_queue_ctrl { |