summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/ina2xx29
-rw-r--r--Documentation/hwmon/it8728
-rw-r--r--drivers/hwmon/Kconfig13
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/acpi_power_meter.c166
-rw-r--r--drivers/hwmon/ad7314.c11
-rw-r--r--drivers/hwmon/fam15h_power.c13
-rw-r--r--drivers/hwmon/ina2xx.c368
-rw-r--r--drivers/hwmon/it87.c384
-rw-r--r--drivers/hwmon/k10temp.c13
-rw-r--r--drivers/hwmon/k8temp.c13
-rw-r--r--drivers/hwmon/ntc_thermistor.c191
-rw-r--r--include/linux/platform_data/ina2xx.h19
13 files changed, 902 insertions, 347 deletions
diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
new file mode 100644
index 000000000000..f50a6cc27616
--- /dev/null
+++ b/Documentation/hwmon/ina2xx
@@ -0,0 +1,29 @@
+Kernel driver ina2xx
+====================
+
+Supported chips:
+ * Texas Instruments INA219
+ Prefix: 'ina219'
+ Addresses: I2C 0x40 - 0x4f
+ Datasheet: Publicly available at the Texas Instruments website
+ http://www.ti.com/
+
+ * Texas Instruments INA226
+ Prefix: 'ina226'
+ Addresses: I2C 0x40 - 0x4f
+ Datasheet: Publicly available at the Texas Instruments website
+ http://www.ti.com/
+
+Author: Lothar Felten <l-felten@ti.com>
+
+Description
+-----------
+
+The INA219 is a high-side current shunt and power monitor with an I2C
+interface. The INA219 monitors both shunt drop and supply voltage, with
+programmable conversion times and filtering.
+
+The INA226 is a current shunt and power monitor with an I2C interface.
+The INA226 monitors both a shunt voltage drop and bus supply voltage.
+
+The shunt value in micro-ohms can be set via platform data.
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index fba745571684..87850d86c559 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -30,6 +30,14 @@ Supported chips:
Prefix: 'it8728'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
+ * IT8782F
+ Prefix: 'it8782'
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+ Datasheet: Not publicly available
+ * IT8783E/F
+ Prefix: 'it8783'
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+ Datasheet: Not publicly available
* SiS950 [clone of IT8705F]
Prefix: 'it87'
Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -75,7 +83,8 @@ Description
-----------
This driver implements support for the IT8705F, IT8712F, IT8716F,
-IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E and SiS950 chips.
+IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8781F, IT8782F,
+IT8783E/F, and SiS950 chips.
These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -99,11 +108,11 @@ The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions
have support for 2 additional fans. The additional fans are supported by the
driver.
-The IT8716F, IT8718F, IT8720F and IT8721F/IT8758E, and late IT8712F and
-IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This
-is better (no more fan clock divider mess) but not compatible with the older
-chips and revisions. The 16-bit tachometer mode is enabled by the driver when
-one of the above chips is detected.
+The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8782F, IT8783E/F, and late
+IT8712F and IT8705F also have optional 16-bit tachometer counters for fans 1 to
+3. This is better (no more fan clock divider mess) but not compatible with the
+older chips and revisions. The 16-bit tachometer mode is enabled by the driver
+when one of the above chips is detected.
The IT8726F is just bit enhanced IT8716F with additional hardware
for AMD power sequencing. Therefore the chip will appear as IT8716F
@@ -131,9 +140,10 @@ inputs can measure voltages between 0 and 4.08 volts, with a resolution of
0.016 volt (except IT8721F/IT8758E and IT8728F: 0.012 volt.) The battery
voltage in8 does not have limit registers.
-On the IT8721F/IT8758E, some voltage inputs are internal and scaled inside
-the chip (in7, in8 and optionally in3). The driver handles this transparently
-so user-space doesn't have to care.
+On the IT8721F/IT8758E, IT8782F, and IT8783E/F, some voltage inputs are
+internal and scaled inside the chip (in7 (optional for IT8782F and IT8783E/F),
+in8 and optionally in3). The driver handles this transparently so user-space
+doesn't have to care.
The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value:
the voltage level your processor should work with. This is hardcoded by
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e466ecba8dc1..7cd9bf42108b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1102,6 +1102,19 @@ config SENSORS_AMC6821
This driver can also be build as a module. If so, the module
will be called amc6821.
+config SENSORS_INA2XX
+ tristate "Texas Instruments INA219, INA226"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for INA219 and INA226 power
+ monitor chips.
+
+ The INA2xx driver is configured for the default configuration of
+ the part as described in the datasheet.
+ Default value for Rshunt is 10 mOhms.
+ This driver can also be built as a module. If so, the module
+ will be called ina2xx.
+
config SENSORS_THMC50
tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 6d3f11f71815..e1eeac13b851 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o
obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o
obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
+obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_JC42) += jc42.o
obj-$(CONFIG_SENSORS_JZ4740) += jz4740-hwmon.o
diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c
index 9140236a0182..34ad5a27a7e9 100644
--- a/drivers/hwmon/acpi_power_meter.c
+++ b/drivers/hwmon/acpi_power_meter.c
@@ -107,15 +107,7 @@ struct acpi_power_meter_resource {
struct kobject *holders_dir;
};
-struct ro_sensor_template {
- char *label;
- ssize_t (*show)(struct device *dev,
- struct device_attribute *devattr,
- char *buf);
- int index;
-};
-
-struct rw_sensor_template {
+struct sensor_template {
char *label;
ssize_t (*show)(struct device *dev,
struct device_attribute *devattr,
@@ -469,52 +461,67 @@ static ssize_t show_name(struct device *dev,
return sprintf(buf, "%s\n", ACPI_POWER_METER_NAME);
}
+#define RO_SENSOR_TEMPLATE(_label, _show, _index) \
+ { \
+ .label = _label, \
+ .show = _show, \
+ .index = _index, \
+ }
+
+#define RW_SENSOR_TEMPLATE(_label, _show, _set, _index) \
+ { \
+ .label = _label, \
+ .show = _show, \
+ .set = _set, \
+ .index = _index, \
+ }
+
/* Sensor descriptions. If you add a sensor, update NUM_SENSORS above! */
-static struct ro_sensor_template meter_ro_attrs[] = {
-{POWER_AVERAGE_NAME, show_power, 0},
-{"power1_accuracy", show_accuracy, 0},
-{"power1_average_interval_min", show_val, 0},
-{"power1_average_interval_max", show_val, 1},
-{"power1_is_battery", show_val, 5},
-{NULL, NULL, 0},
+static struct sensor_template meter_attrs[] = {
+ RO_SENSOR_TEMPLATE(POWER_AVERAGE_NAME, show_power, 0),
+ RO_SENSOR_TEMPLATE("power1_accuracy", show_accuracy, 0),
+ RO_SENSOR_TEMPLATE("power1_average_interval_min", show_val, 0),
+ RO_SENSOR_TEMPLATE("power1_average_interval_max", show_val, 1),
+ RO_SENSOR_TEMPLATE("power1_is_battery", show_val, 5),
+ RW_SENSOR_TEMPLATE(POWER_AVG_INTERVAL_NAME, show_avg_interval,
+ set_avg_interval, 0),
+ {},
};
-static struct rw_sensor_template meter_rw_attrs[] = {
-{POWER_AVG_INTERVAL_NAME, show_avg_interval, set_avg_interval, 0},
-{NULL, NULL, NULL, 0},
+static struct sensor_template misc_cap_attrs[] = {
+ RO_SENSOR_TEMPLATE("power1_cap_min", show_val, 2),
+ RO_SENSOR_TEMPLATE("power1_cap_max", show_val, 3),
+ RO_SENSOR_TEMPLATE("power1_cap_hyst", show_val, 4),
+ RO_SENSOR_TEMPLATE(POWER_ALARM_NAME, show_val, 6),
+ {},
};
-static struct ro_sensor_template misc_cap_attrs[] = {
-{"power1_cap_min", show_val, 2},
-{"power1_cap_max", show_val, 3},
-{"power1_cap_hyst", show_val, 4},
-{POWER_ALARM_NAME, show_val, 6},
-{NULL, NULL, 0},
+static struct sensor_template ro_cap_attrs[] = {
+ RO_SENSOR_TEMPLATE(POWER_CAP_NAME, show_cap, 0),
+ {},
};
-static struct ro_sensor_template ro_cap_attrs[] = {
-{POWER_CAP_NAME, show_cap, 0},
-{NULL, NULL, 0},
+static struct sensor_template rw_cap_attrs[] = {
+ RW_SENSOR_TEMPLATE(POWER_CAP_NAME, show_cap, set_cap, 0),
+ {},
};
-static struct rw_sensor_template rw_cap_attrs[] = {
-{POWER_CAP_NAME, show_cap, set_cap, 0},
-{NULL, NULL, NULL, 0},
+static struct sensor_template trip_attrs[] = {
+ RW_SENSOR_TEMPLATE("power1_average_min", show_val, set_trip, 7),
+ RW_SENSOR_TEMPLATE("power1_average_max", show_val, set_trip, 8),
+ {},
};
-static struct rw_sensor_template trip_attrs[] = {
-{"power1_average_min", show_val, set_trip, 7},
-{"power1_average_max", show_val, set_trip, 8},
-{NULL, NULL, NULL, 0},
+static struct sensor_template misc_attrs[] = {
+ RO_SENSOR_TEMPLATE("name", show_name, 0),
+ RO_SENSOR_TEMPLATE("power1_model_number", show_str, 0),
+ RO_SENSOR_TEMPLATE("power1_oem_info", show_str, 2),
+ RO_SENSOR_TEMPLATE("power1_serial_number", show_str, 1),
+ {},
};
-static struct ro_sensor_template misc_attrs[] = {
-{"name", show_name, 0},
-{"power1_model_number", show_str, 0},
-{"power1_oem_info", show_str, 2},
-{"power1_serial_number", show_str, 1},
-{NULL, NULL, 0},
-};
+#undef RO_SENSOR_TEMPLATE
+#undef RW_SENSOR_TEMPLATE
/* Read power domain data */
static void remove_domain_devices(struct acpi_power_meter_resource *resource)
@@ -619,49 +626,24 @@ end:
}
/* Registration and deregistration */
-static int register_ro_attrs(struct acpi_power_meter_resource *resource,
- struct ro_sensor_template *ro)
+static int register_attrs(struct acpi_power_meter_resource *resource,
+ struct sensor_template *attrs)
{
struct device *dev = &resource->acpi_dev->dev;
struct sensor_device_attribute *sensors =
&resource->sensors[resource->num_sensors];
int res = 0;
- while (ro->label) {
- sensors->dev_attr.attr.name = ro->label;
+ while (attrs->label) {
+ sensors->dev_attr.attr.name = attrs->label;
sensors->dev_attr.attr.mode = S_IRUGO;
- sensors->dev_attr.show = ro->show;
- sensors->index = ro->index;
+ sensors->dev_attr.show = attrs->show;
+ sensors->index = attrs->index;
- sysfs_attr_init(&sensors->dev_attr.attr);
- res = device_create_file(dev, &sensors->dev_attr);
- if (res) {
- sensors->dev_attr.attr.name = NULL;
- goto error;
+ if (attrs->set) {
+ sensors->dev_attr.attr.mode |= S_IWUSR;
+ sensors->dev_attr.store = attrs->set;
}
- sensors++;
- resource->num_sensors++;
- ro++;
- }
-
-error:
- return res;
-}
-
-static int register_rw_attrs(struct acpi_power_meter_resource *resource,
- struct rw_sensor_template *rw)
-{
- struct device *dev = &resource->acpi_dev->dev;
- struct sensor_device_attribute *sensors =
- &resource->sensors[resource->num_sensors];
- int res = 0;
-
- while (rw->label) {
- sensors->dev_attr.attr.name = rw->label;
- sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR;
- sensors->dev_attr.show = rw->show;
- sensors->dev_attr.store = rw->set;
- sensors->index = rw->index;
sysfs_attr_init(&sensors->dev_attr.attr);
res = device_create_file(dev, &sensors->dev_attr);
@@ -671,7 +653,7 @@ static int register_rw_attrs(struct acpi_power_meter_resource *resource,
}
sensors++;
resource->num_sensors++;
- rw++;
+ attrs++;
}
error:
@@ -703,10 +685,7 @@ static int setup_attrs(struct acpi_power_meter_resource *resource)
return res;
if (resource->caps.flags & POWER_METER_CAN_MEASURE) {
- res = register_ro_attrs(resource, meter_ro_attrs);
- if (res)
- goto error;
- res = register_rw_attrs(resource, meter_rw_attrs);
+ res = register_attrs(resource, meter_attrs);
if (res)
goto error;
}
@@ -718,28 +697,27 @@ static int setup_attrs(struct acpi_power_meter_resource *resource)
goto skip_unsafe_cap;
}
- if (resource->caps.configurable_cap) {
- res = register_rw_attrs(resource, rw_cap_attrs);
- if (res)
- goto error;
- } else {
- res = register_ro_attrs(resource, ro_cap_attrs);
- if (res)
- goto error;
- }
- res = register_ro_attrs(resource, misc_cap_attrs);
+ if (resource->caps.configurable_cap)
+ res = register_attrs(resource, rw_cap_attrs);
+ else
+ res = register_attrs(resource, ro_cap_attrs);
+
+ if (res)
+ goto error;
+
+ res = register_attrs(resource, misc_cap_attrs);
if (res)
goto error;
}
-skip_unsafe_cap:
+skip_unsafe_cap:
if (resource->caps.flags & POWER_METER_CAN_TRIP) {
- res = register_rw_attrs(resource, trip_attrs);
+ res = register_attrs(resource, trip_attrs);
if (res)
goto error;
}
- res = register_ro_attrs(resource, misc_attrs);
+ res = register_attrs(resource, misc_attrs);
if (res)
goto error;
diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c
index f85ce70d9677..cfec802cf9ca 100644
--- a/drivers/hwmon/ad7314.c
+++ b/drivers/hwmon/ad7314.c
@@ -18,21 +18,14 @@
#include <linux/hwmon-sysfs.h>
/*
- * AD7314 power mode
- */
-#define AD7314_PD 0x2000
-
-/*
* AD7314 temperature masks
*/
-#define AD7314_TEMP_SIGN 0x200
#define AD7314_TEMP_MASK 0x7FE0
-#define AD7314_TEMP_OFFSET 5
+#define AD7314_TEMP_SHIFT 5
/*
* ADT7301 and ADT7302 temperature masks
*/
-#define ADT7301_TEMP_SIGN 0x2000
#define ADT7301_TEMP_MASK 0x3FFF
enum ad7314_variant {
@@ -73,7 +66,7 @@ static ssize_t ad7314_show_temperature(struct device *dev,
return ret;
switch (spi_get_device_id(chip->spi_dev)->driver_data) {
case ad7314:
- data = (ret & AD7314_TEMP_MASK) >> AD7314_TEMP_OFFSET;
+ data = (ret & AD7314_TEMP_MASK) >> AD7314_TEMP_SHIFT;
data = (data << 6) >> 6;
return sprintf(buf, "%d\n", 250 * data);
diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
index e8e18cab1fb8..6b13f1a4dc27 100644
--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -257,15 +257,4 @@ static struct pci_driver fam15h_power_driver = {
.remove = __devexit_p(fam15h_power_remove),
};
-static int __init fam15h_power_init(void)
-{
- return pci_register_driver(&fam15h_power_driver);
-}
-
-static void __exit fam15h_power_exit(void)
-{
- pci_unregister_driver(&fam15h_power_driver);
-}
-
-module_init(fam15h_power_init)
-module_exit(fam15h_power_exit)
+module_pci_driver(fam15h_power_driver);
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
new file mode 100644
index 000000000000..7f3f4a385729
--- /dev/null
+++ b/drivers/hwmon/ina2xx.c
@@ -0,0 +1,368 @@
+/*
+ * Driver for Texas Instruments INA219, INA226 power monitor chips
+ *
+ * INA219:
+ * Zero Drift Bi-Directional Current/Power Monitor with I2C Interface
+ * Datasheet: http://www.ti.com/product/ina219
+ *
+ * INA226:
+ * Bi-Directional Current/Power Monitor with I2C Interface
+ * Datasheet: http://www.ti.com/product/ina226
+ *
+ * Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
+ * Thanks to Jan Volkering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <linux/platform_data/ina2xx.h>
+
+/* common register definitions */
+#define INA2XX_CONFIG 0x00
+#define INA2XX_SHUNT_VOLTAGE 0x01 /* readonly */
+#define INA2XX_BUS_VOLTAGE 0x02 /* readonly */
+#define INA2XX_POWER 0x03 /* readonly */
+#define INA2XX_CURRENT 0x04 /* readonly */
+#define INA2XX_CALIBRATION 0x05
+
+/* INA226 register definitions */
+#define INA226_MASK_ENABLE 0x06
+#define INA226_ALERT_LIMIT 0x07
+#define INA226_DIE_ID 0xFF
+
+
+/* register count */
+#define INA219_REGISTERS 6
+#define INA226_REGISTERS 8
+
+#define INA2XX_MAX_REGISTERS 8
+
+/* settings - depend on use case */
+#define INA219_CONFIG_DEFAULT 0x399F /* PGA=8 */
+#define INA226_CONFIG_DEFAULT 0x4527 /* averages=16 */
+
+/* worst case is 68.10 ms (~14.6Hz, ina219) */
+#define INA2XX_CONVERSION_RATE 15
+
+enum ina2xx_ids { ina219, ina226 };
+
+struct ina2xx_data {
+ struct device *hwmon_dev;
+
+ struct mutex update_lock;
+ bool valid;
+ unsigned long last_updated;
+
+ int kind;
+ int registers;
+ u16 regs[INA2XX_MAX_REGISTERS];
+};
+
+int ina2xx_read_word(struct i2c_client *client, int reg)
+{
+ int val = i2c_smbus_read_word_data(client, reg);
+ if (unlikely(val < 0)) {
+ dev_dbg(&client->dev,
+ "Failed to read register: %d\n", reg);
+ return val;
+ }
+ return be16_to_cpu(val);
+}
+
+void ina2xx_write_word(struct i2c_client *client, int reg, int data)
+{
+ i2c_smbus_write_word_data(client, reg, cpu_to_be16(data));
+}
+
+static struct ina2xx_data *ina2xx_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ina2xx_data *data = i2c_get_clientdata(client);
+ struct ina2xx_data *ret = data;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated +
+ HZ / INA2XX_CONVERSION_RATE) || !data->valid) {
+
+ int i;
+
+ dev_dbg(&client->dev, "Starting ina2xx update\n");
+
+ /* Read all registers */
+ for (i = 0; i < data->registers; i++) {
+ int rv = ina2xx_read_word(client, i);
+ if (rv < 0) {
+ ret = ERR_PTR(rv);
+ goto abort;
+ }
+ data->regs[i] = rv;
+ }
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+abort:
+ mutex_unlock(&data->update_lock);
+ return ret;
+}
+
+static int ina219_get_value(struct ina2xx_data *data, u8 reg)
+{
+ /*
+ * calculate exact value for the given register
+ * we assume default power-on reset settings:
+ * bus voltage range 32V
+ * gain = /8
+ * adc 1 & 2 -> conversion time 532uS
+ * mode is continuous shunt and bus
+ * calibration value is INA219_CALIBRATION_VALUE
+ */
+ int val = data->regs[reg];
+
+ switch (reg) {
+ case INA2XX_SHUNT_VOLTAGE:
+ /* LSB=10uV. Convert to mV. */
+ val = DIV_ROUND_CLOSEST(val, 100);
+ break;
+ case INA2XX_BUS_VOLTAGE:
+ /* LSB=4mV. Register is not right aligned, convert to mV. */
+ val = (val >> 3) * 4;
+ break;
+ case INA2XX_POWER:
+ /* LSB=20mW. Convert to uW */
+ val = val * 20 * 1000;
+ break;
+ case INA2XX_CURRENT:
+ /* LSB=1mA (selected). Is in mA */
+ break;
+ default:
+ /* programmer goofed */
+ WARN_ON_ONCE(1);
+ val = 0;
+ break;
+ }
+
+ return val;
+}
+
+static int ina226_get_value(struct ina2xx_data *data, u8 reg)
+{
+ /*
+ * calculate exact value for the given register
+ * we assume default power-on reset settings:
+ * bus voltage range 32V
+ * gain = /8
+ * adc 1 & 2 -> conversion time 532uS
+ * mode is continuous shunt and bus
+ * calibration value is INA226_CALIBRATION_VALUE
+ */
+ int val = data->regs[reg];
+
+ switch (reg) {
+ case INA2XX_SHUNT_VOLTAGE:
+ /* LSB=2.5uV. Convert to mV. */
+ val = DIV_ROUND_CLOSEST(val, 400);
+ break;
+ case INA2XX_BUS_VOLTAGE:
+ /* LSB=1.25mV. Convert to mV. */
+ val = val + DIV_ROUND_CLOSEST(val, 4);
+ break;
+ case INA2XX_POWER:
+ /* LSB=25mW. Convert to uW */
+ val = val * 25 * 1000;
+ break;
+ case INA2XX_CURRENT:
+ /* LSB=1mA (selected). Is in mA */
+ break;
+ default:
+ /* programmer goofed */
+ WARN_ON_ONCE(1);
+ val = 0;
+ break;
+ }
+
+ return val;
+}
+
+static ssize_t ina2xx_show_value(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct ina2xx_data *data = ina2xx_update_device(dev);
+ int value = 0;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ switch (data->kind) {
+ case ina219:
+ value = ina219_get_value(data, attr->index);
+ break;
+ case ina226:
+ value = ina226_get_value(data, attr->index);
+ break;
+ default:
+ WARN_ON_ONCE(1);
+ break;
+ }
+ return snprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
+/* shunt voltage */
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, \
+ ina2xx_show_value, NULL, INA2XX_SHUNT_VOLTAGE);
+
+/* bus voltage */
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, \
+ ina2xx_show_value, NULL, INA2XX_BUS_VOLTAGE);
+
+/* calculated current */
+static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, \
+ ina2xx_show_value, NULL, INA2XX_CURRENT);
+
+/* calculated power */
+static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, \
+ ina2xx_show_value, NULL, INA2XX_POWER);
+
+/* pointers to created device attributes */
+static struct attribute *ina2xx_attributes[] = {
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_curr1_input.dev_attr.attr,
+ &sensor_dev_attr_power1_input.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ina2xx_group = {
+ .attrs = ina2xx_attributes,
+};
+
+static int ina2xx_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ struct ina2xx_data *data;
+ struct ina2xx_platform_data *pdata;
+ int ret = 0;
+ long shunt = 10000; /* default shunt value 10mOhms */
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
+ data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ if (client->dev.platform_data) {
+ pdata =
+ (struct ina2xx_platform_data *)client->dev.platform_data;
+ shunt = pdata->shunt_uohms;
+ }
+
+ if (shunt <= 0)
+ return -ENODEV;
+
+ /* set the device type */
+ data->kind = id->driver_data;
+
+ switch (data->kind) {
+ case ina219:
+ /* device configuration */
+ ina2xx_write_word(client, INA2XX_CONFIG, INA219_CONFIG_DEFAULT);
+
+ /* set current LSB to 1mA, shunt is in uOhms */
+ /* (equation 13 in datasheet) */
+ ina2xx_write_word(client, INA2XX_CALIBRATION, 40960000 / shunt);
+ dev_info(&client->dev,
+ "power monitor INA219 (Rshunt = %li uOhm)\n", shunt);
+ data->registers = INA219_REGISTERS;
+ break;
+ case ina226:
+ /* device configuration */
+ ina2xx_write_word(client, INA2XX_CONFIG, INA226_CONFIG_DEFAULT);
+
+ /* set current LSB to 1mA, shunt is in uOhms */
+ /* (equation 1 in datasheet)*/
+ ina2xx_write_word(client, INA2XX_CALIBRATION, 5120000 / shunt);
+ dev_info(&client->dev,
+ "power monitor INA226 (Rshunt = %li uOhm)\n", shunt);
+ data->registers = INA226_REGISTERS;
+ break;
+ default:
+ /* unknown device id */
+ return -ENODEV;
+ }
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
+ ret = sysfs_create_group(&client->dev.kobj, &ina2xx_group);
+ if (ret)
+ return ret;
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ ret = PTR_ERR(data->hwmon_dev);
+ goto out_err_hwmon;
+ }
+
+ return 0;
+
+out_err_hwmon:
+ sysfs_remove_group(&client->dev.kobj, &ina2xx_group);
+ return ret;
+}
+
+static int ina2xx_remove(struct i2c_client *client)
+{
+ struct ina2xx_data *data = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &ina2xx_group);
+
+ return 0;
+}
+
+static const struct i2c_device_id ina2xx_id[] = {
+ { "ina219", ina219 },
+ { "ina226", ina226 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ina2xx_id);
+
+static struct i2c_driver ina2xx_driver = {
+ .driver = {
+ .name = "ina2xx",
+ },
+ .probe = ina2xx_probe,
+ .remove = ina2xx_remove,
+ .id_table = ina2xx_id,
+};
+
+static int __init ina2xx_init(void)
+{
+ return i2c_add_driver(&ina2xx_driver);
+}
+
+static void __exit ina2xx_exit(void)
+{
+ i2c_del_driver(&ina2xx_driver);
+}
+
+MODULE_AUTHOR("Lothar Felten <l-felten@ti.com>");
+MODULE_DESCRIPTION("ina2xx driver");
+MODULE_LICENSE("GPL");
+
+module_init(ina2xx_init);
+module_exit(ina2xx_exit);
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 0b204e4cf51c..e7701d99f8e8 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -19,6 +19,8 @@
* IT8726F Super I/O chip w/LPC interface
* IT8728F Super I/O chip w/LPC interface
* IT8758E Super I/O chip w/LPC interface
+ * IT8782F Super I/O chip w/LPC interface
+ * IT8783E/F Super I/O chip w/LPC interface
* Sis950 A clone of the IT8705F
*
* Copyright (C) 2001 Chris Gauthron
@@ -59,7 +61,8 @@
#define DRVNAME "it87"
-enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728 };
+enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8782,
+ it8783 };
static unsigned short force_id;
module_param(force_id, ushort, 0);
@@ -137,13 +140,18 @@ static inline void superio_exit(void)
#define IT8721F_DEVID 0x8721
#define IT8726F_DEVID 0x8726
#define IT8728F_DEVID 0x8728
+#define IT8782F_DEVID 0x8782
+#define IT8783E_DEVID 0x8783
#define IT87_ACT_REG 0x30
#define IT87_BASE_REG 0x60
/* Logical device 7 registers (IT8712F and later) */
+#define IT87_SIO_GPIO1_REG 0x25
#define IT87_SIO_GPIO3_REG 0x27
#define IT87_SIO_GPIO5_REG 0x29
+#define IT87_SIO_PINX1_REG 0x2a /* Pin selection */
#define IT87_SIO_PINX2_REG 0x2c /* Pin selection */
+#define IT87_SIO_SPI_REG 0xef /* SPI function pin select */
#define IT87_SIO_VID_REG 0xfc /* VID value */
#define IT87_SIO_BEEP_PIN_REG 0xf6 /* Beep pin mapping */
@@ -210,6 +218,7 @@ static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
#define IT87_REG_VIN_ENABLE 0x50
#define IT87_REG_TEMP_ENABLE 0x51
+#define IT87_REG_TEMP_EXTRA 0x55
#define IT87_REG_BEEP_ENABLE 0x5c
#define IT87_REG_CHIPID 0x58
@@ -226,9 +235,11 @@ struct it87_sio_data {
u8 beep_pin;
u8 internal; /* Internal sensors can be labeled */
/* Features skipped based on config or DMI */
+ u16 skip_in;
u8 skip_vid;
u8 skip_fan;
u8 skip_pwm;
+ u8 skip_temp;
};
/*
@@ -253,6 +264,7 @@ struct it87_data {
u8 has_fan; /* Bitfield, fans enabled */
u16 fan[5]; /* Register values, possibly combined */
u16 fan_min[5]; /* Register values, possibly combined */
+ u8 has_temp; /* Bitfield, temp sensors enabled */
s8 temp[3]; /* Register value */
s8 temp_high[3]; /* Register value */
s8 temp_low[3]; /* Register value */
@@ -304,31 +316,23 @@ static inline int has_newer_autopwm(const struct it87_data *data)
|| data->type == it8728;
}
-static u8 in_to_reg(const struct it87_data *data, int nr, long val)
+static int adc_lsb(const struct it87_data *data, int nr)
{
- long lsb;
-
- if (has_12mv_adc(data)) {
- if (data->in_scaled & (1 << nr))
- lsb = 24;
- else
- lsb = 12;
- } else
- lsb = 16;
+ int lsb = has_12mv_adc(data) ? 12 : 16;
+ if (data->in_scaled & (1 << nr))
+ lsb <<= 1;
+ return lsb;
+}
- val = DIV_ROUND_CLOSEST(val, lsb);
+static u8 in_to_reg(const struct it87_data *data, int nr, long val)
+{
+ val = DIV_ROUND_CLOSEST(val, adc_lsb(data, nr));
return SENSORS_LIMIT(val, 0, 255);
}
static int in_from_reg(const struct it87_data *data, int nr, int val)
{
- if (has_12mv_adc(data)) {
- if (data->in_scaled & (1 << nr))
- return val * 24;
- else
- return val * 12;
- } else
- return val * 16;
+ return val * adc_lsb(data, nr);
}
static inline u8 FAN_TO_REG(long rpm, int div)
@@ -407,7 +411,9 @@ static inline int has_16bit_fans(const struct it87_data *data)
|| data->type == it8718
|| data->type == it8720
|| data->type == it8721
- || data->type == it8728;
+ || data->type == it8728
+ || data->type == it8782
+ || data->type == it8783;
}
static inline int has_old_autopwm(const struct it87_data *data)
@@ -1369,57 +1375,103 @@ static ssize_t show_name(struct device *dev, struct device_attribute
}
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-static struct attribute *it87_attributes[] = {
+static struct attribute *it87_attributes_in[9][5] = {
+{
&sensor_dev_attr_in0_input.dev_attr.attr,
- &sensor_dev_attr_in1_input.dev_attr.attr,
- &sensor_dev_attr_in2_input.dev_attr.attr,
- &sensor_dev_attr_in3_input.dev_attr.attr,
- &sensor_dev_attr_in4_input.dev_attr.attr,
- &sensor_dev_attr_in5_input.dev_attr.attr,
- &sensor_dev_attr_in6_input.dev_attr.attr,
- &sensor_dev_attr_in7_input.dev_attr.attr,
- &sensor_dev_attr_in8_input.dev_attr.attr,
&sensor_dev_attr_in0_min.dev_attr.attr,
- &sensor_dev_attr_in1_min.dev_attr.attr,
- &sensor_dev_attr_in2_min.dev_attr.attr,
- &sensor_dev_attr_in3_min.dev_attr.attr,
- &sensor_dev_attr_in4_min.dev_attr.attr,
- &sensor_dev_attr_in5_min.dev_attr.attr,
- &sensor_dev_attr_in6_min.dev_attr.attr,
- &sensor_dev_attr_in7_min.dev_attr.attr,
&sensor_dev_attr_in0_max.dev_attr.attr,
- &sensor_dev_attr_in1_max.dev_attr.attr,
- &sensor_dev_attr_in2_max.dev_attr.attr,
- &sensor_dev_attr_in3_max.dev_attr.attr,
- &sensor_dev_attr_in4_max.dev_attr.attr,
- &sensor_dev_attr_in5_max.dev_attr.attr,
- &sensor_dev_attr_in6_max.dev_attr.attr,
- &sensor_dev_attr_in7_max.dev_attr.attr,
&sensor_dev_attr_in0_alarm.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
&sensor_dev_attr_in1_alarm.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
&sensor_dev_attr_in2_alarm.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
&sensor_dev_attr_in3_alarm.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
&sensor_dev_attr_in4_alarm.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in5_min.dev_attr.attr,
+ &sensor_dev_attr_in5_max.dev_attr.attr,
&sensor_dev_attr_in5_alarm.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in6_min.dev_attr.attr,
+ &sensor_dev_attr_in6_max.dev_attr.attr,
&sensor_dev_attr_in6_alarm.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in7_min.dev_attr.attr,
+ &sensor_dev_attr_in7_max.dev_attr.attr,
&sensor_dev_attr_in7_alarm.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_in8_input.dev_attr.attr,
+ NULL
+} };
+static const struct attribute_group it87_group_in[9] = {
+ { .attrs = it87_attributes_in[0] },
+ { .attrs = it87_attributes_in[1] },
+ { .attrs = it87_attributes_in[2] },
+ { .attrs = it87_attributes_in[3] },
+ { .attrs = it87_attributes_in[4] },
+ { .attrs = it87_attributes_in[5] },
+ { .attrs = it87_attributes_in[6] },
+ { .attrs = it87_attributes_in[7] },
+ { .attrs = it87_attributes_in[8] },
+};
+
+static struct attribute *it87_attributes_temp[3][6] = {
+{
&sensor_dev_attr_temp1_input.dev_attr.attr,
- &sensor_dev_attr_temp2_input.dev_attr.attr,
- &sensor_dev_attr_temp3_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
- &sensor_dev_attr_temp2_max.dev_attr.attr,
- &sensor_dev_attr_temp3_max.dev_attr.attr,
&sensor_dev_attr_temp1_min.dev_attr.attr,
- &sensor_dev_attr_temp2_min.dev_attr.attr,
- &sensor_dev_attr_temp3_min.dev_attr.attr,
&sensor_dev_attr_temp1_type.dev_attr.attr,
- &sensor_dev_attr_temp2_type.dev_attr.attr,
- &sensor_dev_attr_temp3_type.dev_attr.attr,
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ NULL
+} , {
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_type.dev_attr.attr,
&sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ NULL
+} , {
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_type.dev_attr.attr,
&sensor_dev_attr_temp3_alarm.dev_attr.attr,
+ NULL
+} };
+
+static const struct attribute_group it87_group_temp[3] = {
+ { .attrs = it87_attributes_temp[0] },
+ { .attrs = it87_attributes_temp[1] },
+ { .attrs = it87_attributes_temp[2] },
+};
+static struct attribute *it87_attributes[] = {
&dev_attr_alarms.attr,
&sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
&dev_attr_name.attr,
@@ -1430,7 +1482,7 @@ static const struct attribute_group it87_group = {
.attrs = it87_attributes,
};
-static struct attribute *it87_attributes_beep[] = {
+static struct attribute *it87_attributes_in_beep[] = {
&sensor_dev_attr_in0_beep.dev_attr.attr,
&sensor_dev_attr_in1_beep.dev_attr.attr,
&sensor_dev_attr_in2_beep.dev_attr.attr,
@@ -1439,15 +1491,13 @@ static struct attribute *it87_attributes_beep[] = {
&sensor_dev_attr_in5_beep.dev_attr.attr,
&sensor_dev_attr_in6_beep.dev_attr.attr,
&sensor_dev_attr_in7_beep.dev_attr.attr,
+ NULL
+};
+static struct attribute *it87_attributes_temp_beep[] = {
&sensor_dev_attr_temp1_beep.dev_attr.attr,
&sensor_dev_attr_temp2_beep.dev_attr.attr,
&sensor_dev_attr_temp3_beep.dev_attr.attr,
- NULL
-};
-
-static const struct attribute_group it87_group_beep = {
- .attrs = it87_attributes_beep,
};
static struct attribute *it87_attributes_fan16[5][3+1] = { {
@@ -1651,6 +1701,12 @@ static int __init it87_find(unsigned short *address,
case IT8728F_DEVID:
sio_data->type = it8728;
break;
+ case IT8782F_DEVID:
+ sio_data->type = it8782;
+ break;
+ case IT8783E_DEVID:
+ sio_data->type = it8783;
+ break;
case 0xffff: /* No device at all */
goto exit;
default:
@@ -1686,16 +1742,86 @@ static int __init it87_find(unsigned short *address,
/* The IT8705F has a different LD number for GPIO */
superio_select(5);
sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
+ } else if (sio_data->type == it8783) {
+ int reg25, reg27, reg2A, reg2C, regEF;
+
+ sio_data->skip_vid = 1; /* No VID */
+
+ superio_select(GPIO);
+
+ reg25 = superio_inb(IT87_SIO_GPIO1_REG);
+ reg27 = superio_inb(IT87_SIO_GPIO3_REG);
+ reg2A = superio_inb(IT87_SIO_PINX1_REG);
+ reg2C = superio_inb(IT87_SIO_PINX2_REG);
+ regEF = superio_inb(IT87_SIO_SPI_REG);
+
+ /* Check if fan3 is there or not */
+ if ((reg27 & (1 << 0)) || !(reg2C & (1 << 2)))
+ sio_data->skip_fan |= (1 << 2);
+ if ((reg25 & (1 << 4))
+ || (!(reg2A & (1 << 1)) && (regEF & (1 << 0))))
+ sio_data->skip_pwm |= (1 << 2);
+
+ /* Check if fan2 is there or not */
+ if (reg27 & (1 << 7))
+ sio_data->skip_fan |= (1 << 1);
+ if (reg27 & (1 << 3))
+ sio_data->skip_pwm |= (1 << 1);
+
+ /* VIN5 */
+ if ((reg27 & (1 << 0)) || (reg2C & (1 << 2)))
+ sio_data->skip_in |= (1 << 5); /* No VIN5 */
+
+ /* VIN6 */
+ if (reg27 & (1 << 1))
+ sio_data->skip_in |= (1 << 6); /* No VIN6 */
+
+ /*
+ * VIN7
+ * Does not depend on bit 2 of Reg2C, contrary to datasheet.
+ */
+ if (reg27 & (1 << 2)) {
+ /*
+ * The data sheet is a bit unclear regarding the
+ * internal voltage divider for VCCH5V. It says
+ * "This bit enables and switches VIN7 (pin 91) to the
+ * internal voltage divider for VCCH5V".
+ * This is different to other chips, where the internal
+ * voltage divider would connect VIN7 to an internal
+ * voltage source. Maybe that is the case here as well.
+ *
+ * Since we don't know for sure, re-route it if that is
+ * not the case, and ask the user to report if the
+ * resulting voltage is sane.
+ */
+ if (!(reg2C & (1 << 1))) {
+ reg2C |= (1 << 1);
+ superio_outb(IT87_SIO_PINX2_REG, reg2C);
+ pr_notice("Routing internal VCCH5V to in7.\n");
+ }
+ pr_notice("in7 routed to internal voltage divider, with external pin disabled.\n");
+ pr_notice("Please report if it displays a reasonable voltage.\n");
+ }
+
+ if (reg2C & (1 << 0))
+ sio_data->internal |= (1 << 0);
+ if (reg2C & (1 << 1))
+ sio_data->internal |= (1 << 1);
+
+ sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
+
} else {
int reg;
+ bool uart6;
superio_select(GPIO);
reg = superio_inb(IT87_SIO_GPIO3_REG);
- if (sio_data->type == it8721 || sio_data->type == it8728) {
+ if (sio_data->type == it8721 || sio_data->type == it8728 ||
+ sio_data->type == it8782) {
/*
- * The IT8721F/IT8758E doesn't have VID pins at all,
- * not sure about the IT8728F.
+ * IT8721F/IT8758E, and IT8782F don't have VID pins
+ * at all, not sure about the IT8728F.
*/
sio_data->skip_vid = 1;
} else {
@@ -1724,6 +1850,9 @@ static int __init it87_find(unsigned short *address,
sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
reg = superio_inb(IT87_SIO_PINX2_REG);
+
+ uart6 = sio_data->type == it8782 && (reg & (1 << 2));
+
/*
* The IT8720F has no VIN7 pin, so VCCH should always be
* routed internally to VIN7 with an internal divider.
@@ -1733,8 +1862,12 @@ static int __init it87_find(unsigned short *address,
* configured, even though the IT8720F datasheet claims
* that the internal routing of VCCH to VIN7 is the default
* setting. So we force the internal routing in this case.
+ *
+ * On IT8782F, VIN7 is multiplexed with one of the UART6 pins.
+ * If UART6 is enabled, re-route VIN7 to the internal divider
+ * if that is not already the case.
*/
- if (sio_data->type == it8720 && !(reg & (1 << 1))) {
+ if ((sio_data->type == it8720 || uart6) && !(reg & (1 << 1))) {
reg |= (1 << 1);
superio_outb(IT87_SIO_PINX2_REG, reg);
pr_notice("Routing internal VCCH to in7\n");
@@ -1745,6 +1878,20 @@ static int __init it87_find(unsigned short *address,
sio_data->type == it8728)
sio_data->internal |= (1 << 1);
+ /*
+ * On IT8782F, UART6 pins overlap with VIN5, VIN6, and VIN7.
+ * While VIN7 can be routed to the internal voltage divider,
+ * VIN5 and VIN6 are not available if UART6 is enabled.
+ *
+ * Also, temp3 is not available if UART6 is enabled and TEMPIN3
+ * is the temperature source. Since we can not read the
+ * temperature source here, skip_temp is preliminary.
+ */
+ if (uart6) {
+ sio_data->skip_in |= (1 << 5) | (1 << 6);
+ sio_data->skip_temp |= (1 << 2);
+ }
+
sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
}
if (sio_data->beep_pin)
@@ -1782,8 +1929,22 @@ static void it87_remove_files(struct device *dev)
int i;
sysfs_remove_group(&dev->kobj, &it87_group);
- if (sio_data->beep_pin)
- sysfs_remove_group(&dev->kobj, &it87_group_beep);
+ for (i = 0; i < 9; i++) {
+ if (sio_data->skip_in & (1 << i))
+ continue;
+ sysfs_remove_group(&dev->kobj, &it87_group_in[i]);
+ if (it87_attributes_in_beep[i])
+ sysfs_remove_file(&dev->kobj,
+ it87_attributes_in_beep[i]);
+ }
+ for (i = 0; i < 3; i++) {
+ if (!(data->has_temp & (1 << i)))
+ continue;
+ sysfs_remove_group(&dev->kobj, &it87_group_temp[i]);
+ if (sio_data->beep_pin)
+ sysfs_remove_file(&dev->kobj,
+ it87_attributes_temp_beep[i]);
+ }
for (i = 0; i < 5; i++) {
if (!(data->has_fan & (1 << i)))
continue;
@@ -1823,22 +1984,22 @@ static int __devinit it87_probe(struct platform_device *pdev)
"it8720",
"it8721",
"it8728",
+ "it8782",
+ "it8783",
};
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!request_region(res->start, IT87_EC_EXTENT, DRVNAME)) {
+ if (!devm_request_region(&pdev->dev, res->start, IT87_EC_EXTENT,
+ DRVNAME)) {
dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
(unsigned long)res->start,
(unsigned long)(res->start + IT87_EC_EXTENT - 1));
- err = -EBUSY;
- goto ERROR0;
+ return -EBUSY;
}
- data = kzalloc(sizeof(struct it87_data), GFP_KERNEL);
- if (!data) {
- err = -ENOMEM;
- goto ERROR1;
- }
+ data = devm_kzalloc(&pdev->dev, sizeof(struct it87_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
data->addr = res->start;
data->type = sio_data->type;
@@ -1847,10 +2008,8 @@ static int __devinit it87_probe(struct platform_device *pdev)
/* Now, we do the remaining detection. */
if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80)
- || it87_read_value(data, IT87_REG_CHIPID) != 0x90) {
- err = -ENODEV;
- goto ERROR2;
- }
+ || it87_read_value(data, IT87_REG_CHIPID) != 0x90)
+ return -ENODEV;
platform_set_drvdata(pdev, data);
@@ -1867,6 +2026,18 @@ static int __devinit it87_probe(struct platform_device *pdev)
data->in_scaled |= (1 << 7); /* in7 is VSB */
if (sio_data->internal & (1 << 2))
data->in_scaled |= (1 << 8); /* in8 is Vbat */
+ } else if (sio_data->type == it8782 || sio_data->type == it8783) {
+ if (sio_data->internal & (1 << 0))
+ data->in_scaled |= (1 << 3); /* in3 is VCC5V */
+ if (sio_data->internal & (1 << 1))
+ data->in_scaled |= (1 << 7); /* in7 is VCCH5V */
+ }
+
+ data->has_temp = 0x07;
+ if (sio_data->skip_temp & (1 << 2)) {
+ if (sio_data->type == it8782
+ && !(it87_read_value(data, IT87_REG_TEMP_EXTRA) & 0x80))
+ data->has_temp &= ~(1 << 2);
}
/* Initialize the IT87 chip */
@@ -1875,12 +2046,34 @@ static int __devinit it87_probe(struct platform_device *pdev)
/* Register sysfs hooks */
err = sysfs_create_group(&dev->kobj, &it87_group);
if (err)
- goto ERROR2;
+ return err;
- if (sio_data->beep_pin) {
- err = sysfs_create_group(&dev->kobj, &it87_group_beep);
+ for (i = 0; i < 9; i++) {
+ if (sio_data->skip_in & (1 << i))
+ continue;
+ err = sysfs_create_group(&dev->kobj, &it87_group_in[i]);
if (err)
- goto ERROR4;
+ goto error;
+ if (sio_data->beep_pin && it87_attributes_in_beep[i]) {
+ err = sysfs_create_file(&dev->kobj,
+ it87_attributes_in_beep[i]);
+ if (err)
+ goto error;
+ }
+ }
+
+ for (i = 0; i < 3; i++) {
+ if (!(data->has_temp & (1 << i)))
+ continue;
+ err = sysfs_create_group(&dev->kobj, &it87_group_temp[i]);
+ if (err)
+ goto error;
+ if (sio_data->beep_pin) {
+ err = sysfs_create_file(&dev->kobj,
+ it87_attributes_temp_beep[i]);
+ if (err)
+ goto error;
+ }
}
/* Do not create fan files for disabled fans */
@@ -1891,13 +2084,13 @@ static int __devinit it87_probe(struct platform_device *pdev)
continue;
err = sysfs_create_group(&dev->kobj, &fan_group[i]);
if (err)
- goto ERROR4;
+ goto error;
if (sio_data->beep_pin) {
err = sysfs_create_file(&dev->kobj,
it87_attributes_fan_beep[i]);
if (err)
- goto ERROR4;
+ goto error;
if (!fan_beep_need_rw)
continue;
@@ -1922,14 +2115,14 @@ static int __devinit it87_probe(struct platform_device *pdev)
err = sysfs_create_group(&dev->kobj,
&it87_group_pwm[i]);
if (err)
- goto ERROR4;
+ goto error;
if (!has_old_autopwm(data))
continue;
err = sysfs_create_group(&dev->kobj,
&it87_group_autopwm[i]);
if (err)
- goto ERROR4;
+ goto error;
}
}
@@ -1939,7 +2132,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
data->vid = sio_data->vid_value;
err = sysfs_create_group(&dev->kobj, &it87_group_vid);
if (err)
- goto ERROR4;
+ goto error;
}
/* Export labels for internal sensors */
@@ -1949,25 +2142,19 @@ static int __devinit it87_probe(struct platform_device *pdev)
err = sysfs_create_file(&dev->kobj,
it87_attributes_label[i]);
if (err)
- goto ERROR4;
+ goto error;
}
data->hwmon_dev = hwmon_device_register(dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
- goto ERROR4;
+ goto error;
}
return 0;
-ERROR4:
+error:
it87_remove_files(dev);
-ERROR2:
- platform_set_drvdata(pdev, NULL);
- kfree(data);
-ERROR1:
- release_region(res->start, IT87_EC_EXTENT);
-ERROR0:
return err;
}
@@ -1978,10 +2165,6 @@ static int __devexit it87_remove(struct platform_device *pdev)
hwmon_device_unregister(data->hwmon_dev);
it87_remove_files(&pdev->dev);
- release_region(data->addr, IT87_EC_EXTENT);
- platform_set_drvdata(pdev, NULL);
- kfree(data);
-
return 0;
}
@@ -2143,8 +2326,9 @@ static void __devinit it87_init_device(struct platform_device *pdev)
it87_write_value(data, IT87_REG_FAN_16BIT,
tmp | 0x07);
}
- /* IT8705F only supports three fans. */
- if (data->type != it87) {
+ /* IT8705F, IT8782F, and IT8783E/F only support three fans. */
+ if (data->type != it87 && data->type != it8782 &&
+ data->type != it8783) {
if (tmp & (1 << 4))
data->has_fan |= (1 << 3); /* fan4 enabled */
if (tmp & (1 << 5))
@@ -2233,6 +2417,8 @@ static struct it87_data *it87_update_device(struct device *dev)
}
}
for (i = 0; i < 3; i++) {
+ if (!(data->has_temp & (1 << i)))
+ continue;
data->temp[i] =
it87_read_value(data, IT87_REG_TEMP(i));
data->temp_high[i] =
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 307bb325dde9..7356b5ec8f67 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -225,15 +225,4 @@ static struct pci_driver k10temp_driver = {
.remove = __devexit_p(k10temp_remove),
};
-static int __init k10temp_init(void)
-{
- return pci_register_driver(&k10temp_driver);
-}
-
-static void __exit k10temp_exit(void)
-{
- pci_unregister_driver(&k10temp_driver);
-}
-
-module_init(k10temp_init)
-module_exit(k10temp_exit)
+module_pci_driver(k10temp_driver);
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index 575101988751..35aac82ee8eb 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -339,19 +339,8 @@ static struct pci_driver k8temp_driver = {
.remove = __devexit_p(k8temp_remove),
};
-static int __init k8temp_init(void)
-{
- return pci_register_driver(&k8temp_driver);
-}
-
-static void __exit k8temp_exit(void)
-{
- pci_unregister_driver(&k8temp_driver);
-}
+module_pci_driver(k8temp_driver);
MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>");
MODULE_DESCRIPTION("AMD K8 core temperature monitor");
MODULE_LICENSE("GPL");
-
-module_init(k8temp_init)
-module_exit(k8temp_exit)
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index 9b382ec2c3bd..6da9696e1827 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -134,8 +134,7 @@ static inline u64 div64_u64_safe(u64 dividend, u64 divisor)
return div64_u64(dividend, divisor);
}
-static unsigned int get_ohm_of_thermistor(struct ntc_data *data,
- unsigned int uV)
+static int get_ohm_of_thermistor(struct ntc_data *data, unsigned int uV)
{
struct ntc_thermistor_platform_data *pdata = data->pdata;
u64 mV = uV / 1000;
@@ -146,12 +145,12 @@ static unsigned int get_ohm_of_thermistor(struct ntc_data *data,
if (mV == 0) {
if (pdata->connect == NTC_CONNECTED_POSITIVE)
- return UINT_MAX;
+ return INT_MAX;
return 0;
}
if (mV >= pmV)
return (pdata->connect == NTC_CONNECTED_POSITIVE) ?
- 0 : UINT_MAX;
+ 0 : INT_MAX;
if (pdata->connect == NTC_CONNECTED_POSITIVE && puO == 0)
N = div64_u64_safe(pdO * (pmV - mV), mV);
@@ -163,113 +162,109 @@ static unsigned int get_ohm_of_thermistor(struct ntc_data *data,
else
N = div64_u64_safe(pdO * puO * mV, pdO * (pmV - mV) - puO * mV);
- return (unsigned int) N;
+ if (N > INT_MAX)
+ N = INT_MAX;
+ return N;
}
-static int lookup_comp(struct ntc_data *data,
- unsigned int ohm, int *i_low, int *i_high)
+static void lookup_comp(struct ntc_data *data, unsigned int ohm,
+ int *i_low, int *i_high)
{
- int start, end, mid = -1;
+ int start, end, mid;
+
+ /*
+ * Handle special cases: Resistance is higher than or equal to
+ * resistance in first table entry, or resistance is lower or equal
+ * to resistance in last table entry.
+ * In these cases, return i_low == i_high, either pointing to the
+ * beginning or to the end of the table depending on the condition.
+ */
+ if (ohm >= data->comp[0].ohm) {
+ *i_low = 0;
+ *i_high = 0;
+ return;
+ }
+ if (ohm <= data->comp[data->n_comp - 1].ohm) {
+ *i_low = data->n_comp - 1;
+ *i_high = data->n_comp - 1;
+ return;
+ }
/* Do a binary search on compensation table */
start = 0;
end = data->n_comp;
-
- while (end > start) {
+ while (start < end) {
mid = start + (end - start) / 2;
- if (data->comp[mid].ohm < ohm)
+ /*
+ * start <= mid < end
+ * data->comp[start].ohm > ohm >= data->comp[end].ohm
+ *
+ * We could check for "ohm == data->comp[mid].ohm" here, but
+ * that is a quite unlikely condition, and we would have to
+ * check again after updating start. Check it at the end instead
+ * for simplicity.
+ */
+ if (ohm >= data->comp[mid].ohm) {
end = mid;
- else if (data->comp[mid].ohm > ohm)
- start = mid + 1;
- else
- break;
- }
-
- if (mid == 0) {
- if (data->comp[mid].ohm > ohm) {
- *i_high = mid;
- *i_low = mid + 1;
- return 0;
- } else {
- *i_low = mid;
- *i_high = -1;
- return -EINVAL;
- }
- }
- if (mid == (data->n_comp - 1)) {
- if (data->comp[mid].ohm <= ohm) {
- *i_low = mid;
- *i_high = mid - 1;
- return 0;
} else {
- *i_low = -1;
- *i_high = mid;
- return -EINVAL;
+ start = mid + 1;
+ /*
+ * ohm >= data->comp[start].ohm might be true here,
+ * since we set start to mid + 1. In that case, we are
+ * done. We could keep going, but the condition is quite
+ * likely to occur, so it is worth checking for it.
+ */
+ if (ohm >= data->comp[start].ohm)
+ end = start;
}
+ /*
+ * start <= end
+ * data->comp[start].ohm >= ohm >= data->comp[end].ohm
+ */
}
-
- if (data->comp[mid].ohm <= ohm) {
- *i_low = mid;
- *i_high = mid - 1;
- } else {
- *i_low = mid + 1;
- *i_high = mid;
- }
-
- return 0;
+ /*
+ * start == end
+ * ohm >= data->comp[end].ohm
+ */
+ *i_low = end;
+ if (ohm == data->comp[end].ohm)
+ *i_high = end;
+ else
+ *i_high = end - 1;
}
-static int get_temp_mC(struct ntc_data *data, unsigned int ohm, int *temp)
+static int get_temp_mC(struct ntc_data *data, unsigned int ohm)
{
int low, high;
- int ret;
+ int temp;
- ret = lookup_comp(data, ohm, &low, &high);
- if (ret) {
+ lookup_comp(data, ohm, &low, &high);
+ if (low == high) {
/* Unable to use linear approximation */
- if (low != -1)
- *temp = data->comp[low].temp_C * 1000;
- else if (high != -1)
- *temp = data->comp[high].temp_C * 1000;
- else
- return ret;
+ temp = data->comp[low].temp_C * 1000;
} else {
- *temp = data->comp[low].temp_C * 1000 +
+ temp = data->comp[low].temp_C * 1000 +
((data->comp[high].temp_C - data->comp[low].temp_C) *
1000 * ((int)ohm - (int)data->comp[low].ohm)) /
((int)data->comp[high].ohm - (int)data->comp[low].ohm);
}
-
- return 0;
+ return temp;
}
-static int ntc_thermistor_read(struct ntc_data *data, int *temp)
+static int ntc_thermistor_get_ohm(struct ntc_data *data)
{
- int ret;
- int read_ohm, read_uV;
- unsigned int ohm = 0;
-
- if (data->pdata->read_ohm) {
- read_ohm = data->pdata->read_ohm();
- if (read_ohm < 0)
- return read_ohm;
- ohm = (unsigned int)read_ohm;
- }
+ int read_uV;
+
+ if (data->pdata->read_ohm)
+ return data->pdata->read_ohm();
if (data->pdata->read_uV) {
read_uV = data->pdata->read_uV();
if (read_uV < 0)
return read_uV;
- ohm = get_ohm_of_thermistor(data, (unsigned int)read_uV);
- }
-
- ret = get_temp_mC(data, ohm, temp);
- if (ret) {
- dev_dbg(data->dev, "Sensor reading function not available.\n");
- return ret;
+ return get_ohm_of_thermistor(data, read_uV);
}
-
- return 0;
+ return -EINVAL;
}
static ssize_t ntc_show_name(struct device *dev,
@@ -290,12 +285,13 @@ static ssize_t ntc_show_temp(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ntc_data *data = dev_get_drvdata(dev);
- int temp, ret;
+ int ohm;
- ret = ntc_thermistor_read(data, &temp);
- if (ret)
- return ret;
- return sprintf(buf, "%d\n", temp);
+ ohm = ntc_thermistor_get_ohm(data);
+ if (ohm < 0)
+ return ohm;
+
+ return sprintf(buf, "%d\n", get_temp_mC(data, ohm));
}
static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, ntc_show_type, NULL, 0);
@@ -326,14 +322,14 @@ static int __devinit ntc_thermistor_probe(struct platform_device *pdev)
/* Either one of the two is required. */
if (!pdata->read_uV && !pdata->read_ohm) {
- dev_err(&pdev->dev, "Both read_uV and read_ohm missing."
- "Need either one of the two.\n");
+ dev_err(&pdev->dev,
+ "Both read_uV and read_ohm missing. Need either one of the two.\n");
return -EINVAL;
}
if (pdata->read_uV && pdata->read_ohm) {
- dev_warn(&pdev->dev, "Only one of read_uV and read_ohm "
- "is needed; ignoring read_uV.\n");
+ dev_warn(&pdev->dev,
+ "Only one of read_uV and read_ohm is needed; ignoring read_uV.\n");
pdata->read_uV = NULL;
}
@@ -344,12 +340,12 @@ static int __devinit ntc_thermistor_probe(struct platform_device *pdev)
NTC_CONNECTED_POSITIVE) ||
(pdata->connect != NTC_CONNECTED_POSITIVE &&
pdata->connect != NTC_CONNECTED_GROUND))) {
- dev_err(&pdev->dev, "Required data to use read_uV not "
- "supplied.\n");
+ dev_err(&pdev->dev,
+ "Required data to use read_uV not supplied.\n");
return -EINVAL;
}
- data = kzalloc(sizeof(struct ntc_data), GFP_KERNEL);
+ data = devm_kzalloc(&pdev->dev, sizeof(struct ntc_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -370,8 +366,7 @@ static int __devinit ntc_thermistor_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n",
pdev->id_entry->driver_data,
pdev->id_entry->name);
- ret = -EINVAL;
- goto err;
+ return -EINVAL;
}
platform_set_drvdata(pdev, data);
@@ -379,13 +374,13 @@ static int __devinit ntc_thermistor_probe(struct platform_device *pdev)
ret = sysfs_create_group(&data->dev->kobj, &ntc_attr_group);
if (ret) {
dev_err(data->dev, "unable to create sysfs files\n");
- goto err;
+ return ret;
}
data->hwmon_dev = hwmon_device_register(data->dev);
- if (IS_ERR_OR_NULL(data->hwmon_dev)) {
+ if (IS_ERR(data->hwmon_dev)) {
dev_err(data->dev, "unable to register as hwmon device.\n");
- ret = -EINVAL;
+ ret = PTR_ERR(data->hwmon_dev);
goto err_after_sysfs;
}
@@ -395,8 +390,6 @@ static int __devinit ntc_thermistor_probe(struct platform_device *pdev)
return 0;
err_after_sysfs:
sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
-err:
- kfree(data);
return ret;
}
@@ -408,8 +401,6 @@ static int __devexit ntc_thermistor_remove(struct platform_device *pdev)
sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
platform_set_drvdata(pdev, NULL);
- kfree(data);
-
return 0;
}
diff --git a/include/linux/platform_data/ina2xx.h b/include/linux/platform_data/ina2xx.h
new file mode 100644
index 000000000000..9abc0ca7259b
--- /dev/null
+++ b/include/linux/platform_data/ina2xx.h
@@ -0,0 +1,19 @@
+/*
+ * Driver for Texas Instruments INA219, INA226 power monitor chips
+ *
+ * Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * For further information, see the Documentation/hwmon/ina2xx file.
+ */
+
+/**
+ * struct ina2xx_platform_data - ina2xx info
+ * @shunt_uohms shunt resistance in microohms
+ */
+struct ina2xx_platform_data {
+ long shunt_uohms;
+};