diff options
-rw-r--r-- | arch/loongarch/boot/dts/Makefile | 2 | ||||
-rw-r--r-- | arch/loongarch/boot/dts/loongson-2k2000-ref.dts | 72 | ||||
-rw-r--r-- | arch/loongarch/boot/dts/loongson-2k2000.dtsi | 300 |
3 files changed, 373 insertions, 1 deletions
diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile index cfb0a122d91c..747d0c3f6389 100644 --- a/arch/loongarch/boot/dts/Makefile +++ b/arch/loongarch/boot/dts/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only -dtb-y = loongson-2k0500-ref.dtb loongson-2k1000-ref.dtb +dtb-y = loongson-2k0500-ref.dtb loongson-2k1000-ref.dtb loongson-2k2000-ref.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME)) diff --git a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts new file mode 100644 index 000000000000..dca91caf895e --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include "loongson-2k2000.dtsi" + +/ { + compatible = "loongson,ls2k2000-ref", "loongson,ls2k2000"; + model = "Loongson-2K2000 Reference Board"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@200000 { + device_type = "memory"; + reg = <0x0 0x00200000 0x0 0x0ee00000>, + <0x0 0x90000000 0x0 0x70000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x2000000>; + linux,cma-default; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&rtc0 { + status = "okay"; +}; + +&xhci0 { + status = "okay"; +}; + +&xhci1 { + status = "okay"; +}; + +&gmac0 { + status = "okay"; +}; + +&gmac1 { + status = "okay"; +}; + +&gmac2 { + status = "okay"; +}; diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi new file mode 100644 index 000000000000..a231949b5f55 --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@1 { + compatible = "loongson,la364"; + device_type = "cpu"; + reg = <0x0>; + clocks = <&cpu_clk>; + }; + + cpu1: cpu@2 { + compatible = "loongson,la364"; + device_type = "cpu"; + reg = <0x1>; + clocks = <&cpu_clk>; + }; + }; + + cpu_clk: cpu-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1400000000>; + }; + + cpuintc: interrupt-controller { + compatible = "loongson,cpu-interrupt-controller"; + #interrupt-cells = <1>; + interrupt-controller; + }; + + bus@10000000 { + compatible = "simple-bus"; + ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>, + <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>, + <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>, + <0xfe 0x0 0xfe 0x0 0x0 0x40000000>; + #address-cells = <2>; + #size-cells = <2>; + + pmc: power-management@100d0000 { + compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon"; + reg = <0x0 0x100d0000 0x0 0x58>; + interrupt-parent = <&eiointc>; + interrupts = <47>; + loongson,suspend-address = <0x0 0x1c000500>; + + syscon-reboot { + compatible = "syscon-reboot"; + offset = <0x30>; + mask = <0x1>; + }; + + syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmc>; + offset = <0x14>; + mask = <0x3c00>; + value = <0x3c00>; + }; + }; + + liointc: interrupt-controller@1fe01400 { + compatible = "loongson,liointc-1.0"; + reg = <0x0 0x1fe01400 0x0 0x64>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + interrupt-names = "int0"; + loongson,parent_int_map = <0xffffffff>, /* int0 */ + <0x00000000>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + eiointc: interrupt-controller@1fe01600 { + compatible = "loongson,ls2k2000-eiointc"; + reg = <0x0 0x1fe01600 0x0 0xea00>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpuintc>; + interrupts = <3>; + }; + + pic: interrupt-controller@10000000 { + compatible = "loongson,pch-pic-1.0"; + reg = <0x0 0x10000000 0x0 0x400>; + interrupt-controller; + #interrupt-cells = <2>; + loongson,pic-base-vec = <0>; + interrupt-parent = <&eiointc>; + }; + + msi: msi-controller@1fe01140 { + compatible = "loongson,pch-msi-1.0"; + reg = <0x0 0x1fe01140 0x0 0x8>; + msi-controller; + loongson,msi-base-vec = <64>; + loongson,msi-num-vecs = <192>; + interrupt-parent = <&eiointc>; + }; + + rtc0: rtc@100d0100 { + compatible = "loongson,ls2k2000-rtc", "loongson,ls7a-rtc"; + reg = <0x0 0x100d0100 0x0 0x100>; + interrupt-parent = <&pic>; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart0: serial@1fe001e0 { + compatible = "ns16550a"; + reg = <0x0 0x1fe001e0 0x0 0x10>; + clock-frequency = <100000000>; + interrupt-parent = <&liointc>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + no-loopback-test; + status = "disabled"; + }; + + pcie@1a000000 { + compatible = "loongson,ls2k-pci"; + reg = <0x0 0x1a000000 0x0 0x02000000>, + <0xfe 0x0 0x0 0x20000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x0 0xff>; + ranges = <0x01000000 0x0 0x00008000 0x0 0x18400000 0x0 0x00008000>, + <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>; + + gmac0: ethernet@3,0 { + reg = <0x1800 0x0 0x0 0x0 0x0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + gmac1: ethernet@3,1 { + reg = <0x1900 0x0 0x0 0x0 0x0>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + gmac2: ethernet@3,2 { + reg = <0x1a00 0x0 0x0 0x0 0x0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + xhci0: usb@4,0 { + reg = <0x2000 0x0 0x0 0x0 0x0>; + interrupts = <48 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + xhci1: usb@19,0 { + reg = <0xc800 0x0 0x0 0x0 0x0>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + display@6,1 { + reg = <0x3100 0x0 0x0 0x0 0x0>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + hda@7,0 { + reg = <0x3800 0x0 0x0 0x0 0x0>; + interrupts = <58 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + sata: sata@8,0 { + reg = <0x4000 0x0 0x0 0x0 0x0>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + pcie@9,0 { + reg = <0x4800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 32 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@a,0 { + reg = <0x5000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 33 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@b,0 { + reg = <0x5800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 34 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@c,0 { + reg = <0x6000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 35 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@d,0 { + reg = <0x6800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 36 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@e,0 { + reg = <0x7000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 37 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@f,0 { + reg = <0x7800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 40 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@10,0 { + reg = <0x8000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 30 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + }; + }; +}; |