summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--include/linux/nl80211.h7
-rw-r--r--include/net/cfg80211.h20
-rw-r--r--net/wireless/core.h2
-rw-r--r--net/wireless/nl80211.c70
4 files changed, 98 insertions, 1 deletions
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 901a70d327d1..c29a284c27e6 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -527,6 +527,11 @@
* up the event with the request. The event includes the same data and
* has %NL80211_ATTR_ACK set if the frame was ACKed.
*
+ * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
+ * other BSSes when any interfaces are in AP mode. This helps implement
+ * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
+ * messages. Note that per PHY only one application may register.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -660,6 +665,8 @@ enum nl80211_commands {
NL80211_CMD_PROBE_CLIENT,
+ NL80211_CMD_REGISTER_BEACONS,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 389e85e8c03d..d01307f54faa 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1686,6 +1686,9 @@ struct cfg80211_ops {
* command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be
* used for asking the driver/firmware to perform a TDLS operation.
* @WIPHY_FLAG_HAVE_AP_SME: device integrates AP SME
+ * @WIPHY_FLAG_REPORTS_OBSS: the device will report beacons from other BSSes
+ * when there are virtual interfaces in AP mode by calling
+ * cfg80211_report_obss_beacon().
*/
enum wiphy_flags {
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
@@ -1705,6 +1708,7 @@ enum wiphy_flags {
WIPHY_FLAG_SUPPORTS_TDLS = BIT(15),
WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16),
WIPHY_FLAG_HAVE_AP_SME = BIT(17),
+ WIPHY_FLAG_REPORTS_OBSS = BIT(18),
};
/**
@@ -3233,6 +3237,22 @@ bool cfg80211_rx_spurious_frame(struct net_device *dev,
void cfg80211_probe_status(struct net_device *dev, const u8 *addr,
u64 cookie, bool acked, gfp_t gfp);
+/**
+ * cfg80211_report_obss_beacon - report beacon from other APs
+ * @wiphy: The wiphy that received the beacon
+ * @frame: the frame
+ * @len: length of the frame
+ * @freq: frequency the frame was received on
+ * @gfp: allocation flags
+ *
+ * Use this function to report to userspace when a beacon was
+ * received. It is not useful to call this when there is no
+ * netdev that is in AP/GO mode.
+ */
+void cfg80211_report_obss_beacon(struct wiphy *wiphy,
+ const u8 *frame, size_t len,
+ int freq, gfp_t gfp);
+
/* Logging, debugging and troubleshooting/diagnostic helpers. */
/* wiphy_printk helpers, similar to dev_printk */
diff --git a/net/wireless/core.h b/net/wireless/core.h
index b9ec3061ed72..4c6ff4024356 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -54,6 +54,8 @@ struct cfg80211_registered_device {
int opencount; /* also protected by devlist_mtx */
wait_queue_head_t dev_wait;
+ u32 ap_beacons_nlpid;
+
/* BSSes/scanning */
spinlock_t bss_lock;
struct list_head bss_list;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index a8eda12b46a8..68b6708b996f 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -891,6 +891,10 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
if (dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN)
CMD(sched_scan_start, START_SCHED_SCAN);
CMD(probe_client, PROBE_CLIENT);
+ if (dev->wiphy.flags & WIPHY_FLAG_REPORTS_OBSS) {
+ i++;
+ NLA_PUT_U32(msg, i, NL80211_CMD_REGISTER_BEACONS);
+ }
#undef CMD
@@ -5907,6 +5911,21 @@ static int nl80211_probe_client(struct sk_buff *skb,
return err;
}
+static int nl80211_register_beacons(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+
+ if (!(rdev->wiphy.flags & WIPHY_FLAG_REPORTS_OBSS))
+ return -EOPNOTSUPP;
+
+ if (rdev->ap_beacons_nlpid)
+ return -EBUSY;
+
+ rdev->ap_beacons_nlpid = info->snd_pid;
+
+ return 0;
+}
+
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
@@ -6478,6 +6497,14 @@ static struct genl_ops nl80211_ops[] = {
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_REGISTER_BEACONS,
+ .doit = nl80211_register_beacons,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_WIPHY |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {
@@ -7582,6 +7609,44 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr,
}
EXPORT_SYMBOL(cfg80211_probe_status);
+void cfg80211_report_obss_beacon(struct wiphy *wiphy,
+ const u8 *frame, size_t len,
+ int freq, gfp_t gfp)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+ struct sk_buff *msg;
+ void *hdr;
+ u32 nlpid = ACCESS_ONCE(rdev->ap_beacons_nlpid);
+
+ if (!nlpid)
+ return;
+
+ msg = nlmsg_new(len + 100, gfp);
+ if (!msg)
+ return;
+
+ hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_FRAME);
+ if (!hdr) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+ if (freq)
+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, freq);
+ NLA_PUT(msg, NL80211_ATTR_FRAME, len, frame);
+
+ genlmsg_end(msg, hdr);
+
+ genlmsg_unicast(wiphy_net(&rdev->wiphy), msg, nlpid);
+ return;
+
+ nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+ nlmsg_free(msg);
+}
+EXPORT_SYMBOL(cfg80211_report_obss_beacon);
+
static int nl80211_netlink_notify(struct notifier_block * nb,
unsigned long state,
void *_notify)
@@ -7595,9 +7660,12 @@ static int nl80211_netlink_notify(struct notifier_block * nb,
rcu_read_lock();
- list_for_each_entry_rcu(rdev, &cfg80211_rdev_list, list)
+ list_for_each_entry_rcu(rdev, &cfg80211_rdev_list, list) {
list_for_each_entry_rcu(wdev, &rdev->netdev_list, list)
cfg80211_mlme_unregister_socket(wdev, notify->pid);
+ if (rdev->ap_beacons_nlpid == notify->pid)
+ rdev->ap_beacons_nlpid = 0;
+ }
rcu_read_unlock();