diff options
| -rw-r--r-- | drivers/net/can/dev/dev.c | 66 | ||||
| -rw-r--r-- | include/linux/can/dev.h | 8 |
2 files changed, 74 insertions, 0 deletions
diff --git a/drivers/net/can/dev/dev.c b/drivers/net/can/dev/dev.c index 311d8564d611..e3d840b81357 100644 --- a/drivers/net/can/dev/dev.c +++ b/drivers/net/can/dev/dev.c @@ -15,6 +15,7 @@ #include <linux/can/dev.h> #include <linux/can/skb.h> #include <linux/can/led.h> +#include <linux/gpio/consumer.h> #include <linux/of.h> #define MOD_DESC "CAN device driver interface" @@ -400,10 +401,69 @@ void close_candev(struct net_device *dev) } EXPORT_SYMBOL_GPL(close_candev); +static int can_set_termination(struct net_device *ndev, u16 term) +{ + struct can_priv *priv = netdev_priv(ndev); + int set; + + if (term == priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_ENABLED]) + set = 1; + else + set = 0; + + gpiod_set_value(priv->termination_gpio, set); + + return 0; +} + +static int can_get_termination(struct net_device *ndev) +{ + struct can_priv *priv = netdev_priv(ndev); + struct device *dev = ndev->dev.parent; + struct gpio_desc *gpio; + u32 term; + int ret; + + /* Disabling termination by default is the safe choice: Else if many + * bus participants enable it, no communication is possible at all. + */ + gpio = devm_gpiod_get_optional(dev, "termination", GPIOD_OUT_LOW); + if (IS_ERR(gpio)) + return dev_err_probe(dev, PTR_ERR(gpio), + "Cannot get termination-gpios\n"); + + if (!gpio) + return 0; + + ret = device_property_read_u32(dev, "termination-ohms", &term); + if (ret) { + netdev_err(ndev, "Cannot get termination-ohms: %pe\n", + ERR_PTR(ret)); + return ret; + } + + if (term > U16_MAX) { + netdev_err(ndev, "Invalid termination-ohms value (%u > %u)\n", + term, U16_MAX); + return -EINVAL; + } + + priv->termination_const_cnt = ARRAY_SIZE(priv->termination_gpio_ohms); + priv->termination_const = priv->termination_gpio_ohms; + priv->termination_gpio = gpio; + priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_DISABLED] = + CAN_TERMINATION_DISABLED; + priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_ENABLED] = term; + priv->do_set_termination = can_set_termination; + + return 0; +} + /* Register the CAN network device */ int register_candev(struct net_device *dev) { struct can_priv *priv = netdev_priv(dev); + int err; /* Ensure termination_const, termination_const_cnt and * do_set_termination consistency. All must be either set or @@ -419,6 +479,12 @@ int register_candev(struct net_device *dev) if (!priv->data_bitrate_const != !priv->data_bitrate_const_cnt) return -EINVAL; + if (!priv->termination_const) { + err = can_get_termination(dev); + if (err) + return err; + } + dev->rtnl_link_ops = &can_link_ops; netif_carrier_off(dev); diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index 27b275e463da..2413253e54c7 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -32,6 +32,12 @@ enum can_mode { CAN_MODE_SLEEP }; +enum can_termination_gpio { + CAN_TERMINATION_GPIO_DISABLED = 0, + CAN_TERMINATION_GPIO_ENABLED, + CAN_TERMINATION_GPIO_MAX, +}; + /* * CAN common private data */ @@ -55,6 +61,8 @@ struct can_priv { unsigned int termination_const_cnt; const u16 *termination_const; u16 termination; + struct gpio_desc *termination_gpio; + u16 termination_gpio_ohms[CAN_TERMINATION_GPIO_MAX]; enum can_state state; |