summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml1
-rw-r--r--Documentation/devicetree/bindings/spi/omap-spi.txt48
-rw-r--r--Documentation/devicetree/bindings/spi/omap-spi.yaml117
-rw-r--r--Documentation/devicetree/bindings/spi/rockchip-sfc.yaml91
-rw-r--r--Documentation/devicetree/bindings/spi/spi-mt65xx.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-sprd-adi.txt63
-rw-r--r--Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml104
-rw-r--r--drivers/spi/Kconfig12
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/spi-bcm2835aux.c4
-rw-r--r--drivers/spi/spi-ep93xx.c4
-rw-r--r--drivers/spi/spi-fsi.c125
-rw-r--r--drivers/spi/spi-fsl-dspi.c1
-rw-r--r--drivers/spi/spi-geni-qcom.c6
-rw-r--r--drivers/spi/spi-imx.c21
-rw-r--r--drivers/spi/spi-mt65xx.c159
-rw-r--r--drivers/spi/spi-mxic.c44
-rw-r--r--drivers/spi/spi-pic32.c1
-rw-r--r--drivers/spi/spi-pxa2xx.c35
-rw-r--r--drivers/spi/spi-rockchip-sfc.c694
-rw-r--r--drivers/spi/spi-sprd-adi.c287
-rw-r--r--drivers/spi/spi-stm32.c121
-rw-r--r--drivers/spi/spi-tegra114.c8
-rw-r--r--drivers/spi/spi-tegra20-slink.c77
-rw-r--r--drivers/spi/spi-zynq-qspi.c8
-rw-r--r--drivers/spi/spi.c6
-rw-r--r--include/linux/platform_data/spi-mt65xx.h1
-rw-r--r--include/linux/spi/spi.h26
28 files changed, 1502 insertions, 564 deletions
diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
index e425278653f5..e2ca0b000471 100644
--- a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
+++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
@@ -19,7 +19,6 @@ properties:
compatible:
enum:
- ibm,fsi2spi
- - ibm,fsi2spi-restricted
reg:
items:
diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt
deleted file mode 100644
index 487208c256c0..000000000000
--- a/Documentation/devicetree/bindings/spi/omap-spi.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-OMAP2+ McSPI device
-
-Required properties:
-- compatible :
- - "ti,am654-mcspi" for AM654.
- - "ti,omap2-mcspi" for OMAP2 & OMAP3.
- - "ti,omap4-mcspi" for OMAP4+.
-- ti,spi-num-cs : Number of chipselect supported by the instance.
-- ti,hwmods: Name of the hwmod associated to the McSPI
-- ti,pindir-d0-out-d1-in: Select the D0 pin as output and D1 as
- input. The default is D0 as input and
- D1 as output.
-
-Optional properties:
-- dmas: List of DMA specifiers with the controller specific format
- as described in the generic DMA client binding. A tx and rx
- specifier is required for each chip select.
-- dma-names: List of DMA request names. These strings correspond
- 1:1 with the DMA specifiers listed in dmas. The string naming
- is to be "rxN" and "txN" for RX and TX requests,
- respectively, where N equals the chip select number.
-
-Examples:
-
-[hwmod populated DMA resources]
-
-mcspi1: mcspi@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "ti,omap4-mcspi";
- ti,hwmods = "mcspi1";
- ti,spi-num-cs = <4>;
-};
-
-[generic DMA request binding]
-
-mcspi1: mcspi@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "ti,omap4-mcspi";
- ti,hwmods = "mcspi1";
- ti,spi-num-cs = <2>;
- dmas = <&edma 42
- &edma 43
- &edma 44
- &edma 45>;
- dma-names = "tx0", "rx0", "tx1", "rx1";
-};
diff --git a/Documentation/devicetree/bindings/spi/omap-spi.yaml b/Documentation/devicetree/bindings/spi/omap-spi.yaml
new file mode 100644
index 000000000000..e55538186cf6
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/omap-spi.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/omap-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI controller bindings for OMAP and K3 SoCs
+
+maintainers:
+ - Aswath Govindraju <a-govindraju@ti.com>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ti,am654-mcspi
+ - ti,am4372-mcspi
+ - const: ti,omap4-mcspi
+ - items:
+ - enum:
+ - ti,omap2-mcspi
+ - ti,omap4-mcspi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ ti,spi-num-cs:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Number of chipselect supported by the instance.
+ minimum: 1
+ maximum: 4
+
+ ti,hwmods:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ Must be "mcspi<n>", n being the instance number (1-based).
+ This property is applicable only on legacy platforms mainly omap2/3
+ and ti81xx and should not be used on other platforms.
+ deprecated: true
+
+ ti,pindir-d0-out-d1-in:
+ description:
+ Select the D0 pin as output and D1 as input. The default is D0
+ as input and D1 as output.
+ type: boolean
+
+ dmas:
+ description:
+ List of DMA specifiers with the controller specific format as
+ described in the generic DMA client binding. A tx and rx
+ specifier is required for each chip select.
+ minItems: 1
+ maxItems: 8
+
+ dma-names:
+ description:
+ List of DMA request names. These strings correspond 1:1 with
+ the DMA sepecifiers listed in dmas. The string names is to be
+ "rxN" and "txN" for RX and TX requests, respectively. Where N
+ is the chip select number.
+ minItems: 1
+ maxItems: 8
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+if:
+ properties:
+ compatible:
+ oneOf:
+ - const: ti,omap2-mcspi
+ - const: ti,omap4-mcspi
+
+then:
+ properties:
+ ti,hwmods:
+ items:
+ - pattern: "^mcspi([1-9])$"
+
+else:
+ properties:
+ ti,hwmods: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ spi@2100000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x2100000 0x400>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 137 1>;
+ power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+ dma-names = "tx0", "rx0";
+ };
diff --git a/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
new file mode 100644
index 000000000000..339fb39529f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/rockchip-sfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Serial Flash Controller (SFC)
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+ - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ const: rockchip,sfc
+ description:
+ The rockchip sfc controller is a standalone IP with version register,
+ and the driver can handle all the feature difference inside the IP
+ depending on the version register.
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ items:
+ - const: clk_sfc
+ - const: hclk_sfc
+
+ power-domains:
+ maxItems: 1
+
+ rockchip,sfc-no-dma:
+ description: Disable DMA and utilize FIFO mode only
+ type: boolean
+
+patternProperties:
+ "^flash@[0-3]$":
+ type: object
+ properties:
+ reg:
+ minimum: 0
+ maximum: 3
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/px30-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/px30-power.h>
+
+ sfc: spi@ff3a0000 {
+ compatible = "rockchip,sfc";
+ reg = <0xff3a0000 0x4000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+ clock-names = "clk_sfc", "hclk_sfc";
+ pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>;
+ pinctrl-names = "default";
+ power-domains = <&power PX30_PD_MMC_NAND>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <108000000>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
index 4d0e4c15c4ea..2a24969159cc 100644
--- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
+++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
@@ -11,6 +11,7 @@ Required properties:
- mediatek,mt8135-spi: for mt8135 platforms
- mediatek,mt8173-spi: for mt8173 platforms
- mediatek,mt8183-spi: for mt8183 platforms
+ - mediatek,mt6893-spi: for mt6893 platforms
- "mediatek,mt8192-spi", "mediatek,mt6765-spi": for mt8192 platforms
- "mediatek,mt8195-spi", "mediatek,mt6765-spi": for mt8195 platforms
- "mediatek,mt8516-spi", "mediatek,mt2712-spi": for mt8516 platforms
diff --git a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt
deleted file mode 100644
index 2567c829e2dc..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Spreadtrum ADI controller
-
-ADI is the abbreviation of Anolog-Digital interface, which is used to access
-analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
-framework for its hardware implementation is alike to SPI bus and its timing
-is compatile to SPI timing.
-
-ADI controller has 50 channels including 2 software read/write channels and
-48 hardware channels to access analog chip. For 2 software read/write channels,
-users should set ADI registers to access analog chip. For hardware channels,
-we can configure them to allow other hardware components to use it independently,
-which means we can just link one analog chip address to one hardware channel,
-then users can access the mapped analog chip address by this hardware channel
-triggered by hardware components instead of ADI software channels.
-
-Thus we introduce one property named "sprd,hw-channels" to configure hardware
-channels, the first value specifies the hardware channel id which is used to
-transfer data triggered by hardware automatically, and the second value specifies
-the analog chip address where user want to access by hardware components.
-
-Since we have multi-subsystems will use unique ADI to access analog chip, when
-one system is reading/writing data by ADI software channels, that should be under
-one hardware spinlock protection to prevent other systems from reading/writing
-data by ADI software channels at the same time, or two parallel routine of setting
-ADI registers will make ADI controller registers chaos to lead incorrect results.
-Then we need one hardware spinlock to synchronize between the multiple subsystems.
-
-The new version ADI controller supplies multiple master channels for different
-subsystem accessing, that means no need to add hardware spinlock to synchronize,
-thus change the hardware spinlock support to be optional to keep backward
-compatibility.
-
-Required properties:
-- compatible: Should be "sprd,sc9860-adi".
-- reg: Offset and length of ADI-SPI controller register space.
-- #address-cells: Number of cells required to define a chip select address
- on the ADI-SPI bus. Should be set to 1.
-- #size-cells: Size of cells required to define a chip select address size
- on the ADI-SPI bus. Should be set to 0.
-
-Optional properties:
-- hwlocks: Reference to a phandle of a hwlock provider node.
-- hwlock-names: Reference to hwlock name strings defined in the same order
- as the hwlocks, should be "adi".
-- sprd,hw-channels: This is an array of channel values up to 49 channels.
- The first value specifies the hardware channel id which is used to
- transfer data triggered by hardware automatically, and the second
- value specifies the analog chip address where user want to access
- by hardware components.
-
-SPI slave nodes must be children of the SPI controller node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
-
-Example:
- adi_bus: spi@40030000 {
- compatible = "sprd,sc9860-adi";
- reg = <0 0x40030000 0 0x10000>;
- hwlocks = <&hwlock1 0>;
- hwlock-names = "adi";
- #address-cells = <1>;
- #size-cells = <0>;
- sprd,hw-channels = <30 0x8c20>;
- };
diff --git a/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
new file mode 100644
index 000000000000..fe014020da69
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Spreadtrum ADI controller
+
+maintainers:
+ - Orson Zhai <orsonzhai@gmail.com>
+ - Baolin Wang <baolin.wang7@gmail.com>
+ - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+ ADI is the abbreviation of Anolog-Digital interface, which is used to access
+ analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
+ framework for its hardware implementation is alike to SPI bus and its timing
+ is compatile to SPI timing.
+
+ ADI controller has 50 channels including 2 software read/write channels and
+ 48 hardware channels to access analog chip. For 2 software read/write channels,
+ users should set ADI registers to access analog chip. For hardware channels,
+ we can configure them to allow other hardware components to use it independently,
+ which means we can just link one analog chip address to one hardware channel,
+ then users can access the mapped analog chip address by this hardware channel
+ triggered by hardware components instead of ADI software channels.
+
+ Thus we introduce one property named "sprd,hw-channels" to configure hardware
+ channels, the first value specifies the hardware channel id which is used to
+ transfer data triggered by hardware automatically, and the second value specifies
+ the analog chip address where user want to access by hardware components.
+
+ Since we have multi-subsystems will use unique ADI to access analog chip, when
+ one system is reading/writing data by ADI software channels, that should be under
+ one hardware spinlock protection to prevent other systems from reading/writing
+ data by ADI software channels at the same time, or two parallel routine of setting
+ ADI registers will make ADI controller registers chaos to lead incorrect results.
+ Then we need one hardware spinlock to synchronize between the multiple subsystems.
+
+ The new version ADI controller supplies multiple master channels for different
+ subsystem accessing, that means no need to add hardware spinlock to synchronize,
+ thus change the hardware spinlock support to be optional to keep backward
+ compatibility.
+
+allOf:
+ - $ref: /spi/spi-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - sprd,sc9860-adi
+ - sprd,sc9863-adi
+ - sprd,ums512-adi
+
+ reg:
+ maxItems: 1
+
+ hwlocks:
+ maxItems: 1
+
+ hwlock-names:
+ const: adi
+
+ sprd,hw-channels:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: A list of hardware channels
+ minItems: 1
+ maxItems: 48
+ items:
+ items:
+ - description: The hardware channel id which is used to transfer data
+ triggered by hardware automatically, channel id 0-1 are for software
+ use, 2-49 are hardware channels.
+ minimum: 2
+ maximum: 49
+ - description: The analog chip address where user want to access by
+ hardware components.
+
+required:
+ - compatible
+ - reg
+ - '#address-cells'
+ - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ aon {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ adi_bus: spi@40030000 {
+ compatible = "sprd,sc9860-adi";
+ reg = <0 0x40030000 0 0x10000>;
+ hwlocks = <&hwlock1 0>;
+ hwlock-names = "adi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sprd,hw-channels = <30 0x8c20>;
+ };
+ };
+...
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index e71a4c514f7b..83e352b0c8f9 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -658,6 +658,18 @@ config SPI_ROCKCHIP
The main usecase of this controller is to use spi flash as boot
device.
+config SPI_ROCKCHIP_SFC
+ tristate "Rockchip Serial Flash Controller (SFC)"
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
+ depends on HAS_IOMEM && HAS_DMA
+ help
+ This enables support for Rockchip serial flash controller. This
+ is a specialized controller used to access SPI flash on some
+ Rockchip SOCs.
+
+ ROCKCHIP SFC supports DMA and PIO modes. When DMA is not available,
+ the driver automatically falls back to PIO mode.
+
config SPI_RB4XX
tristate "Mikrotik RB4XX SPI master"
depends on SPI_MASTER && ATH79
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 13e54c45e9df..699db95c8441 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_SPI_QCOM_GENI) += spi-geni-qcom.o
obj-$(CONFIG_SPI_QCOM_QSPI) += spi-qcom-qspi.o
obj-$(CONFIG_SPI_QUP) += spi-qup.o
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
+obj-$(CONFIG_SPI_ROCKCHIP_SFC) += spi-rockchip-sfc.o
obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o
obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c
index 37eab100a7d8..7d709a8c833b 100644
--- a/drivers/spi/spi-bcm2835aux.c
+++ b/drivers/spi/spi-bcm2835aux.c
@@ -143,12 +143,12 @@ static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs)
}
#endif /* CONFIG_DEBUG_FS */
-static inline u32 bcm2835aux_rd(struct bcm2835aux_spi *bs, unsigned reg)
+static inline u32 bcm2835aux_rd(struct bcm2835aux_spi *bs, unsigned int reg)
{
return readl(bs->regs + reg);
}
-static inline void bcm2835aux_wr(struct bcm2835aux_spi *bs, unsigned reg,
+static inline void bcm2835aux_wr(struct bcm2835aux_spi *bs, unsigned int reg,
u32 val)
{
writel(val, bs->regs + reg);
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index aa676559d273..5896a7b2fade 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -550,7 +550,7 @@ static int ep93xx_spi_prepare_hardware(struct spi_master *master)
u32 val;
int ret;
- ret = clk_enable(espi->clk);
+ ret = clk_prepare_enable(espi->clk);
if (ret)
return ret;
@@ -570,7 +570,7 @@ static int ep93xx_spi_unprepare_hardware(struct spi_master *master)
val &= ~SSPCR1_SSE;
writel(val, espi->mmio + SSPCR1);
- clk_disable(espi->clk);
+ clk_disable_unprepare(espi->clk);
return 0;
}
diff --git a/drivers/spi/spi-fsi.c b/drivers/spi/spi-fsi.c
index 87f8829c3995..829770b8ec74 100644
--- a/drivers/spi/spi-fsi.c
+++ b/drivers/spi/spi-fsi.c
@@ -25,16 +25,11 @@
#define SPI_FSI_BASE 0x70000
#define SPI_FSI_INIT_TIMEOUT_MS 1000
-#define SPI_FSI_MAX_XFR_SIZE 2048
-#define SPI_FSI_MAX_XFR_SIZE_RESTRICTED 8
+#define SPI_FSI_MAX_RX_SIZE 8
+#define SPI_FSI_MAX_TX_SIZE 40
#define SPI_FSI_ERROR 0x0
#define SPI_FSI_COUNTER_CFG 0x1
-#define SPI_FSI_COUNTER_CFG_LOOPS(x) (((u64)(x) & 0xffULL) << 32)
-#define SPI_FSI_COUNTER_CFG_N2_RX BIT_ULL(8)
-#define SPI_FSI_COUNTER_CFG_N2_TX BIT_ULL(9)
-#define SPI_FSI_COUNTER_CFG_N2_IMPLICIT BIT_ULL(10)
-#define SPI_FSI_COUNTER_CFG_N2_RELOAD BIT_ULL(11)
#define SPI_FSI_CFG1 0x2
#define SPI_FSI_CLOCK_CFG 0x3
#define SPI_FSI_CLOCK_CFG_MM_ENABLE BIT_ULL(32)
@@ -76,8 +71,6 @@ struct fsi_spi {
struct device *dev; /* SPI controller device */
struct fsi_device *fsi; /* FSI2SPI CFAM engine device */
u32 base;
- size_t max_xfr_size;
- bool restricted;
};
struct fsi_spi_sequence {
@@ -241,7 +234,7 @@ static int fsi_spi_reset(struct fsi_spi *ctx)
return fsi_spi_write_reg(ctx, SPI_FSI_STATUS, 0ULL);
}
-static int fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val)
+static void fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val)
{
/*
* Add the next byte of instruction to the 8-byte sequence register.
@@ -251,8 +244,6 @@ static int fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val)
*/
seq->data |= (u64)val << seq->bit;
seq->bit -= 8;
-
- return ((64 - seq->bit) / 8) - 2;
}
static void fsi_spi_sequence_init(struct fsi_spi_sequence *seq)
@@ -261,71 +252,11 @@ static void fsi_spi_sequence_init(struct fsi_spi_sequence *seq)
seq->data = 0ULL;
}
-static int fsi_spi_sequence_transfer(struct fsi_spi *ctx,
- struct fsi_spi_sequence *seq,
- struct spi_transfer *transfer)
-{
- int loops;
- int idx;
- int rc;
- u8 val = 0;
- u8 len = min(transfer->len, 8U);
- u8 rem = transfer->len % len;
-
- loops = transfer->len / len;
-
- if (transfer->tx_buf) {
- val = SPI_FSI_SEQUENCE_SHIFT_OUT(len);
- idx = fsi_spi_sequence_add(seq, val);
-
- if (rem)
- rem = SPI_FSI_SEQUENCE_SHIFT_OUT(rem);
- } else if (transfer->rx_buf) {
- val = SPI_FSI_SEQUENCE_SHIFT_IN(len);
- idx = fsi_spi_sequence_add(seq, val);
-
- if (rem)
- rem = SPI_FSI_SEQUENCE_SHIFT_IN(rem);
- } else {
- return -EINVAL;
- }
-
- if (ctx->restricted && loops > 1) {
- dev_warn(ctx->dev,
- "Transfer too large; no branches permitted.\n");
- return -EINVAL;
- }
-
- if (loops > 1) {
- u64 cfg = SPI_FSI_COUNTER_CFG_LOOPS(loops - 1);
-
- fsi_spi_sequence_add(seq, SPI_FSI_SEQUENCE_BRANCH(idx));
-
- if (transfer->rx_buf)
- cfg |= SPI_FSI_COUNTER_CFG_N2_RX |
- SPI_FSI_COUNTER_CFG_N2_TX |
- SPI_FSI_COUNTER_CFG_N2_IMPLICIT |
- SPI_FSI_COUNTER_CFG_N2_RELOAD;
-
- rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, cfg);
- if (rc)
- return rc;
- } else {
- fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, 0ULL);
- }
-
- if (rem)
- fsi_spi_sequence_add(seq, rem);
-
- return 0;
-}
-
static int fsi_spi_transfer_data(struct fsi_spi *ctx,
struct spi_transfer *transfer)
{
int rc = 0;
u64 status = 0ULL;
- u64 cfg = 0ULL;
if (transfer->tx_buf) {
int nb;
@@ -363,16 +294,6 @@ static int fsi_spi_transfer_data(struct fsi_spi *ctx,
u64 in = 0ULL;
u8 *rx = transfer->rx_buf;
- rc = fsi_spi_read_reg(ctx, SPI_FSI_COUNTER_CFG, &cfg);
- if (rc)
- return rc;
-
- if (cfg & SPI_FSI_COUNTER_CFG_N2_IMPLICIT) {
- rc = fsi_spi_write_reg(ctx, SPI_FSI_DATA_TX, 0);
- if (rc)
- return rc;
- }
-
while (transfer->len > recv) {
do {
rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS,
@@ -439,6 +360,10 @@ static int fsi_spi_transfer_init(struct fsi_spi *ctx)
}
} while (seq_state && (seq_state != SPI_FSI_STATUS_SEQ_STATE_IDLE));
+ rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, 0ULL);
+ if (rc)
+ return rc;
+
rc = fsi_spi_read_reg(ctx, SPI_FSI_CLOCK_CFG, &clock_cfg);
if (rc)
return rc;
@@ -459,6 +384,7 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
{
int rc;
u8 seq_slave = SPI_FSI_SEQUENCE_SEL_SLAVE(mesg->spi->chip_select + 1);
+ unsigned int len;
struct spi_transfer *transfer;
struct fsi_spi *ctx = spi_controller_get_devdata(ctlr);
@@ -471,8 +397,7 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
struct spi_transfer *next = NULL;
/* Sequencer must do shift out (tx) first. */
- if (!transfer->tx_buf ||
- transfer->len > (ctx->max_xfr_size + 8)) {
+ if (!transfer->tx_buf || transfer->len > SPI_FSI_MAX_TX_SIZE) {
rc = -EINVAL;
goto error;
}
@@ -486,9 +411,13 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
fsi_spi_sequence_init(&seq);
fsi_spi_sequence_add(&seq, seq_slave);
- rc = fsi_spi_sequence_transfer(ctx, &seq, transfer);
- if (rc)
- goto error;
+ len = transfer->len;
+ while (len > 8) {
+ fsi_spi_sequence_add(&seq,
+ SPI_FSI_SEQUENCE_SHIFT_OUT(8));
+ len -= 8;
+ }
+ fsi_spi_sequence_add(&seq, SPI_FSI_SEQUENCE_SHIFT_OUT(len));
if (!list_is_last(&transfer->transfer_list,
&mesg->transfers)) {
@@ -496,7 +425,9 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
/* Sequencer can only do shift in (rx) after tx. */
if (next->rx_buf) {
- if (next->len > ctx->max_xfr_size) {
+ u8 shift;
+
+ if (next->len > SPI_FSI_MAX_RX_SIZE) {
rc = -EINVAL;
goto error;
}
@@ -504,10 +435,8 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
dev_dbg(ctx->dev, "Sequence rx of %d bytes.\n",
next->len);
- rc = fsi_spi_sequence_transfer(ctx, &seq,
- next);
- if (rc)
- goto error;
+ shift = SPI_FSI_SEQUENCE_SHIFT_IN(next->len);
+ fsi_spi_sequence_add(&seq, shift);
} else {
next = NULL;
}
@@ -541,9 +470,7 @@ error:
static size_t fsi_spi_max_transfer_size(struct spi_device *spi)
{
- struct fsi_spi *ctx = spi_controller_get_devdata(spi->controller);
-
- return ctx->max_xfr_size;
+ return SPI_FSI_MAX_RX_SIZE;
}
static int fsi_spi_probe(struct device *dev)
@@ -582,14 +509,6 @@ static int fsi_spi_probe(struct device *dev)
ctx->fsi = fsi;
ctx->base = base + SPI_FSI_BASE;
- if (of_device_is_compatible(np, "ibm,fsi2spi-restricted")) {
- ctx->restricted = true;
- ctx->max_xfr_size = SPI_FSI_MAX_XFR_SIZE_RESTRICTED;
- } else {
- ctx->restricted = false;
- ctx->max_xfr_size = SPI_FSI_MAX_XFR_SIZE;
- }
-
rc = devm_spi_register_controller(dev, ctlr);
if (rc)
spi_controller_put(ctlr);
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index fb45e6af6638..fd004c9db9dc 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -530,6 +530,7 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
goto err_rx_dma_buf;
}
+ memset(&cfg, 0, sizeof(cfg));
cfg.src_addr = phy_addr + SPI_POPR;
cfg.dst_addr = phy_addr + SPI_PUSHR;
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index b3861fb88711..2f51421e2a71 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -549,12 +549,6 @@ static void setup_fifo_xfer(struct spi_transfer *xfer,
*/
spin_lock_irq(&mas->lock);
geni_se_setup_m_cmd(se, m_cmd, FRAGMENTATION);
-
- /*
- * TX_WATERMARK_REG should be set after SPI configuration and
- * setting up GENI SE engine, as driver starts data transfer
- * for the watermark interrupt.
- */
if (m_cmd & SPI_TX_ONLY) {
if (geni_spi_handle_tx(mas))
writel(mas->tx_wm, se->base + SE_GENI_TX_WATERMARK_REG);
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index fa68e9817929..8d8df51c5466 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1052,12 +1052,8 @@ static void spi_imx_set_burst_len(struct spi_imx_data *spi_imx, int n_bits)
static void spi_imx_push(struct spi_imx_data *spi_imx)
{
- unsigned int burst_len, fifo_words;
+ unsigned int burst_len;
- if (spi_imx->dynamic_burst)
- fifo_words = 4;
- else
- fifo_words = spi_imx_bytes_per_word(spi_imx->bits_per_word);
/*
* Reload the FIFO when the remaining bytes to be transferred in the
* current burst is 0. This only applies when bits_per_word is a
@@ -1076,7 +1072,7 @@ static void spi_imx_push(struct spi_imx_data *spi_imx)
spi_imx->remainder = burst_len;
} else {
- spi_imx->remainder = fifo_words;
+ spi_imx->remainder = spi_imx_bytes_per_word(spi_imx->bits_per_word);
}
}
@@ -1084,8 +1080,7 @@ static void spi_imx_push(struct spi_imx_data *spi_imx)
if (!spi_imx->count)
break;
if (spi_imx->dynamic_burst &&
- spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder,
- fifo_words))
+ spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder, 4))
break;
spi_imx->tx(spi_imx);
spi_imx->txfifo++;
@@ -1195,6 +1190,7 @@ static int spi_imx_setupxfer(struct spi_device *spi,
* dynamic_burst in that case.
*/
if (spi_imx->devtype_data->dynamic_burst && !spi_imx->slave_mode &&
+ !(spi->mode & SPI_CS_WORD) &&
(spi_imx->bits_per_word == 8 ||
spi_imx->bits_per_word == 16 ||
spi_imx->bits_per_word == 32)) {
@@ -1630,6 +1626,15 @@ static int spi_imx_probe(struct platform_device *pdev)
is_imx53_ecspi(spi_imx))
spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY;
+ if (is_imx51_ecspi(spi_imx) &&
+ device_property_read_u32(&pdev->dev, "cs-gpios", NULL))
+ /*
+ * When using HW-CS implementing SPI_CS_WORD can be done by just
+ * setting the burst length to the word size. This is
+ * considerably faster than manually controlling the CS.
+ */
+ spi_imx->bitbang.master->mode_bits |= SPI_CS_WORD;
+
spi_imx->spi_drctl = spi_drctl;
init_completion(&spi_imx->xfer_done);
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 7914255521c3..386e8c84be0a 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -42,8 +42,9 @@
#define SPI_CFG1_CS_IDLE_OFFSET 0
#define SPI_CFG1_PACKET_LOOP_OFFSET 8
#define SPI_CFG1_PACKET_LENGTH_OFFSET 16
-#define SPI_CFG1_GET_TICK_DLY_OFFSET 30
+#define SPI_CFG1_GET_TICK_DLY_OFFSET 29
+#define SPI_CFG1_GET_TICK_DLY_MASK 0xe0000000
#define SPI_CFG1_CS_IDLE_MASK 0xff
#define SPI_CFG1_PACKET_LOOP_MASK 0xff00
#define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000
@@ -90,6 +91,8 @@ struct mtk_spi_compatible {
bool enhance_timing;
/* some IC support DMA addr extension */
bool dma_ext;
+ /* some IC no need unprepare SPI clk */
+ bool no_need_unprepare;
};
struct mtk_spi {
@@ -104,6 +107,7 @@ struct mtk_spi {
struct scatterlist *tx_sgl, *rx_sgl;
u32 tx_sgl_len, rx_sgl_len;
const struct mtk_spi_compatible *dev_comp;
+ u32 spi_clk_hz;
};
static const struct mtk_spi_compatible mtk_common_compat;
@@ -135,12 +139,21 @@ static const struct mtk_spi_compatible mt8183_compat = {
.enhance_timing = true,
};
+static const struct mtk_spi_compatible mt6893_compat = {
+ .need_pad_sel = true,
+ .must_tx = true,
+ .enhance_timing = true,
+ .dma_ext = true,
+ .no_need_unprepare = true,
+};
+
/*
* A piece of default chip info unless the platform
* supplies it.
*/
static const struct mtk_chip_config mtk_default_chip_info = {
.sample_sel = 0,
+ .tick_delay = 0,
};
static const struct of_device_id mtk_spi_of_match[] = {
@@ -174,6 +187,9 @@ static const struct of_device_id mtk_spi_of_match[] = {
{ .compatible = "mediatek,mt8192-spi",
.data = (void *)&mt6765_compat,
},
+ { .compatible = "mediatek,mt6893-spi",
+ .data = (void *)&mt6893_compat,
+ },
{}
};
MODULE_DEVICE_TABLE(of, mtk_spi_of_match);
@@ -192,6 +208,65 @@ static void mtk_spi_reset(struct mtk_spi *mdata)
writel(reg_val, mdata->base + SPI_CMD_REG);
}
+static int mtk_spi_set_hw_cs_timing(struct spi_device *spi)
+{
+ struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
+ struct spi_delay *cs_setup = &spi->cs_setup;
+ struct spi_delay *cs_hold = &spi->cs_hold;
+ struct spi_delay *cs_inactive = &spi->cs_inactive;
+ u32 setup, hold, inactive;
+ u32 reg_val;
+ int delay;
+
+ delay = spi_delay_to_ns(cs_setup, NULL);
+ if (delay < 0)
+ return delay;
+ setup = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
+
+ delay = spi_delay_to_ns(cs_hold, NULL);
+ if (delay < 0)
+ return delay;
+ hold = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
+
+ delay = spi_delay_to_ns(cs_inactive, NULL);
+ if (delay < 0)
+ return delay;
+ inactive = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
+
+ setup = setup ? setup : 1;
+ hold = hold ? hold : 1;
+ inactive = inactive ? inactive : 1;
+
+ reg_val = readl(mdata->base + SPI_CFG0_REG);
+ if (mdata->dev_comp->enhance_timing) {
+ hold = min_t(u32, hold, 0x10000);
+ setup = min_t(u32, setup, 0x10000);
+ reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+ reg_val |= (((hold - 1) & 0xffff)
+ << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+ reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+ reg_val |= (((setup - 1) & 0xffff)
+ << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+ } else {
+ hold = min_t(u32, hold, 0x100);
+ setup = min_t(u32, setup, 0x100);
+ reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
+ reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
+ reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
+ reg_val |= (((setup - 1) & 0xff)
+ << SPI_CFG0_CS_SETUP_OFFSET);
+ }
+ writel(reg_val, mdata->base + SPI_CFG0_REG);
+
+ inactive = min_t(u32, inactive, 0x100);
+ reg_val = readl(mdata->base + SPI_CFG1_REG);
+ reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
+ reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
+ writel(reg_val, mdata->base + SPI_CFG1_REG);
+
+ return 0;
+}
+
static int mtk_spi_prepare_message(struct spi_master *master,
struct spi_message *msg)
{
@@ -261,6 +336,15 @@ static int mtk_spi_prepare_message(struct spi_master *master,
writel(mdata->pad_sel[spi->chip_select],
mdata->base + SPI_PAD_SEL_REG);
+ /* tick delay */
+ reg_val = readl(mdata->base + SPI_CFG1_REG);
+ reg_val &= ~SPI_CFG1_GET_TICK_DLY_MASK;
+ reg_val |= ((chip_config->tick_delay & 0x7)
+ << SPI_CFG1_GET_TICK_DLY_OFFSET);
+ writel(reg_val, mdata->base + SPI_CFG1_REG);
+
+ /* set hw cs timing */
+ mtk_spi_set_hw_cs_timing(spi);
return 0;
}
@@ -287,12 +371,11 @@ static void mtk_spi_set_cs(struct spi_device *spi, bool enable)
static void mtk_spi_prepare_transfer(struct spi_master *master,
struct spi_transfer *xfer)
{
- u32 spi_clk_hz, div, sck_time, reg_val;
+ u32 div, sck_time, reg_val;
struct mtk_spi *mdata = spi_master_get_devdata(master);
- spi_clk_hz = clk_get_rate(mdata->spi_clk);
- if (xfer->speed_hz < spi_clk_hz / 2)
- div = DIV_ROUND_UP(spi_clk_hz, xfer->speed_hz);
+ if (xfer->speed_hz < mdata->spi_clk_hz / 2)
+ div = DIV_ROUND_UP(mdata->spi_clk_hz, xfer->speed_hz);
else
div = 1;
@@ -507,52 +590,6 @@ static bool mtk_spi_can_dma(struct spi_master *master,
(unsigned long)xfer->rx_buf % 4 == 0);
}
-static int mtk_spi_set_hw_cs_timing(struct spi_device *spi,
- struct spi_delay *setup,
- struct spi_delay *hold,
- struct spi_delay *inactive)
-{
- struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
- u16 setup_dly, hold_dly, inactive_dly;
- u32 reg_val;
-
- if ((setup && setup->unit != SPI_DELAY_UNIT_SCK) ||
- (hold && hold->unit != SPI_DELAY_UNIT_SCK) ||
- (inactive && inactive->unit != SPI_DELAY_UNIT_SCK)) {
- dev_err(&spi->dev,
- "Invalid delay unit, should be SPI_DELAY_UNIT_SCK\n");
- return -EINVAL;
- }
-
- setup_dly = setup ? setup->value : 1;
- hold_dly = hold ? hold->value : 1;
- inactive_dly = inactive ? inactive->value : 1;
-
- reg_val = readl(mdata->base + SPI_CFG0_REG);
- if (mdata->dev_comp->enhance_timing) {
- reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
- reg_val |= (((hold_dly - 1) & 0xffff)
- << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
- reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
- reg_val |= (((setup_dly - 1) & 0xffff)
- << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
- } else {
- reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
- reg_val |= (((hold_dly - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
- reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
- reg_val |= (((setup_dly - 1) & 0xff)
- << SPI_CFG0_CS_SETUP_OFFSET);
- }
- writel(reg_val, mdata->base + SPI_CFG0_REG);
-
- reg_val = readl(mdata->base + SPI_CFG1_REG);
- reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
- reg_val |= (((inactive_dly - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
- writel(reg_val, mdata->base + SPI_CFG1_REG);
-
- return 0;
-}
-
static int mtk_spi_setup(struct spi_device *spi)
{
struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
@@ -790,7 +827,12 @@ static int mtk_spi_probe(struct platform_device *pdev)
goto err_put_master;
}
- clk_disable_unprepare(mdata->spi_clk);
+ mdata->spi_clk_hz = clk_get_rate(mdata->spi_clk);
+
+ if (mdata->dev_comp->no_need_unprepare)
+ clk_disable(mdata->spi_clk);
+ else
+ clk_disable_unprepare(mdata->spi_clk);
pm_runtime_enable(&pdev->dev);
@@ -858,6 +900,9 @@ static int mtk_spi_remove(struct platform_device *pdev)
mtk_spi_reset(mdata);
+ if (mdata->dev_comp->no_need_unprepare)
+ clk_unprepare(mdata->spi_clk);
+
return 0;
}
@@ -906,7 +951,10 @@ static int mtk_spi_runtime_suspend(struct device *dev)
struct spi_master *master = dev_get_drvdata(dev);
struct mtk_spi *mdata = spi_master_get_devdata(master);
- clk_disable_unprepare(mdata->spi_clk);
+ if (mdata->dev_comp->no_need_unprepare)
+ clk_disable(mdata->spi_clk);
+ else
+ clk_disable_unprepare(mdata->spi_clk);
return 0;
}
@@ -917,7 +965,10 @@ static int mtk_spi_runtime_resume(struct device *dev)
struct mtk_spi *mdata = spi_master_get_devdata(master);
int ret;
- ret = clk_prepare_enable(mdata->spi_clk);
+ if (mdata->dev_comp->no_need_unprepare)
+ ret = clk_enable(mdata->spi_clk);
+ else
+ ret = clk_prepare_enable(mdata->spi_clk);
if (ret < 0) {
dev_err(dev, "failed to enable spi_clk (%d)\n", ret);
return ret;
diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c
index 96b418293bf2..45889947afed 100644
--- a/drivers/spi/spi-mxic.c
+++ b/drivers/spi/spi-mxic.c
@@ -335,8 +335,10 @@ static int mxic_spi_data_xfer(struct mxic_spi *mxic, const void *txbuf,
static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
const struct spi_mem_op *op)
{
- if (op->data.buswidth > 4 || op->addr.buswidth > 4 ||
- op->dummy.buswidth > 4 || op->cmd.buswidth > 4)
+ bool all_false;
+
+ if (op->data.buswidth > 8 || op->addr.buswidth > 8 ||
+ op->dummy.buswidth > 8 || op->cmd.buswidth > 8)
return false;
if (op->data.nbytes && op->dummy.nbytes &&
@@ -346,7 +348,13 @@ static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
if (op->addr.nbytes > 7)
return false;
- return spi_mem_default_supports_op(mem, op);
+ all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr &&
+ !op->data.dtr;
+
+ if (all_false)
+ return spi_mem_default_supports_op(mem, op);
+ else
+ return spi_mem_dtr_supports_op(mem, op);
}
static int mxic_spi_mem_exec_op(struct spi_mem *mem,
@@ -355,14 +363,15 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
struct mxic_spi *mxic = spi_master_get_devdata(mem->spi->master);
int nio = 1, i, ret;
u32 ss_ctrl;
- u8 addr[8];
- u8 opcode = op->cmd.opcode;
+ u8 addr[8], cmd[2];
ret = mxic_spi_set_freq(mxic, mem->spi->max_speed_hz);
if (ret)
return ret;
- if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD))
+ if (mem->spi->mode & (SPI_TX_OCTAL | SPI_RX_OCTAL))
+ nio = 8;
+ else if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD))
nio = 4;
else if (mem->spi->mode & (SPI_TX_DUAL | SPI_RX_DUAL))
nio = 2;
@@ -374,19 +383,26 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
mxic->regs + HC_CFG);
writel(HC_EN_BIT, mxic->regs + HC_EN);
- ss_ctrl = OP_CMD_BYTES(1) | OP_CMD_BUSW(fls(op->cmd.buswidth) - 1);
+ ss_ctrl = OP_CMD_BYTES(op->cmd.nbytes) |
+ OP_CMD_BUSW(fls(op->cmd.buswidth) - 1) |
+ (op->cmd.dtr ? OP_CMD_DDR : 0);
if (op->addr.nbytes)
ss_ctrl |= OP_ADDR_BYTES(op->addr.nbytes) |
- OP_ADDR_BUSW(fls(op->addr.buswidth) - 1);
+ OP_ADDR_BUSW(fls(op->addr.buswidth) - 1) |
+ (op->addr.dtr ? OP_ADDR_DDR : 0);
if (op->dummy.nbytes)
ss_ctrl |= OP_DUMMY_CYC(op->dummy.nbytes);
if (op->data.nbytes) {
- ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1);
- if (op->data.dir == SPI_MEM_DATA_IN)
+ ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1) |
+ (op->data.dtr ? OP_DATA_DDR : 0);
+ if (op->data.dir == SPI_MEM_DATA_IN) {
ss_ctrl |= OP_READ;
+ if (op->data.dtr)
+ ss_ctrl |= OP_DQS_EN;
+ }
}
writel(ss_ctrl, mxic->regs + SS_CTRL(mem->spi->chip_select));
@@ -394,7 +410,10 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT,
mxic->regs + HC_CFG);
- ret = mxic_spi_data_xfer(mxic, &opcode, NULL, 1);
+ for (i = 0; i < op->cmd.nbytes; i++)
+ cmd[i] = op->cmd.opcode >> (8 * (op->cmd.nbytes - i - 1));
+
+ ret = mxic_spi_data_xfer(mxic, cmd, NULL, op->cmd.nbytes);
if (ret)
goto out;
@@ -567,7 +586,8 @@ static int mxic_spi_probe(struct platform_device *pdev)
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->mode_bits = SPI_CPOL | SPI_CPHA |
SPI_RX_DUAL | SPI_TX_DUAL |
- SPI_RX_QUAD | SPI_TX_QUAD;
+ SPI_RX_QUAD | SPI_TX_QUAD |
+ SPI_RX_OCTAL | SPI_TX_OCTAL;
mxic_spi_hw_init(mxic);
diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c
index 104bde153efd..5eb7b61bbb4d 100644
--- a/drivers/spi/spi-pic32.c
+++ b/drivers/spi/spi-pic32.c
@@ -361,6 +361,7 @@ static int pic32_spi_dma_config(struct pic32_spi *pic32s, u32 dma_width)
struct dma_slave_config cfg;
int ret;
+ memset(&cfg, 0, sizeof(cfg));
cfg.device_fc = true;
cfg.src_addr = pic32s->dma_base + buf_offset;
cfg.dst_addr = pic32s->dma_base + buf_offset;
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 974e30744b83..1573f6d8eb48 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -594,24 +594,29 @@ static int u32_reader(struct driver_data *drv_data)
static void reset_sccr1(struct driver_data *drv_data)
{
- struct chip_data *chip =
- spi_get_ctldata(drv_data->controller->cur_msg->spi);
- u32 sccr1_reg;
+ u32 mask = drv_data->int_cr1 | drv_data->dma_cr1, threshold;
+ struct chip_data *chip;
+
+ if (drv_data->controller->cur_msg) {
+ chip = spi_get_ctldata(drv_data->controller->cur_msg->spi);
+ threshold = chip->threshold;
+ } else {
+ threshold = 0;
+ }
- sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1;
switch (drv_data->ssp_type) {
case QUARK_X1000_SSP:
- sccr1_reg &= ~QUARK_X1000_SSCR1_RFT;
+ mask |= QUARK_X1000_SSCR1_RFT;
break;
case CE4100_SSP:
- sccr1_reg &= ~CE4100_SSCR1_RFT;
+ mask |= CE4100_SSCR1_RFT;
break;
default:
- sccr1_reg &= ~SSCR1_RFT;
+ mask |= SSCR1_RFT;
break;
}
- sccr1_reg |= chip->threshold;
- pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
+
+ pxa2xx_spi_update(drv_data, SSCR1, mask, threshold);
}
static void int_stop_and_reset(struct driver_data *drv_data)
@@ -724,11 +729,8 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
static void handle_bad_msg(struct driver_data *drv_data)
{
+ int_stop_and_reset(drv_data);
pxa2xx_spi_off(drv_data);
- clear_SSCR1_bits(drv_data, drv_data->int_cr1);
- if (!pxa25x_ssp_comp(drv_data))
- pxa2xx_spi_write(drv_data, SSTO, 0);
- write_SSSR_CS(drv_data, drv_data->clear_sr);
dev_err(drv_data->ssp->dev, "bad message state in interrupt handler\n");
}
@@ -1156,13 +1158,10 @@ static void pxa2xx_spi_handle_err(struct spi_controller *controller,
{
struct driver_data *drv_data = spi_controller_get_devdata(controller);
+ int_stop_and_reset(drv_data);
+
/* Disable the SSP */
pxa2xx_spi_off(drv_data);
- /* Clear and disable interrupts and service requests */
- write_SSSR_CS(drv_data, drv_data->clear_sr);
- clear_SSCR1_bits(drv_data, drv_data->int_cr1 | drv_data->dma_cr1);
- if (!pxa25x_ssp_comp(drv_data))
- pxa2xx_spi_write(drv_data, SSTO, 0);
/*
* Stop the DMA if running. Note DMA callback handler may have unset
diff --git a/drivers/spi/spi-rockchip-sfc.c b/drivers/spi/spi-rockchip-sfc.c
new file mode 100644
index 000000000000..a46b38544027
--- /dev/null
+++ b/drivers/spi/spi-rockchip-sfc.c
@@ -0,0 +1,694 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip Serial Flash Controller Driver
+ *
+ * Copyright (c) 2017-2021, Rockchip Inc.
+ * Author: Shawn Lin <shawn.lin@rock-chips.com>
+ * Chris Morgan <macroalpha82@gmail.com>
+ * Jon Lin <Jon.lin@rock-chips.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi-mem.h>
+
+/* System control */
+#define SFC_CTRL 0x0
+#define SFC_CTRL_PHASE_SEL_NEGETIVE BIT(1)
+#define SFC_CTRL_CMD_BITS_SHIFT 8
+#define SFC_CTRL_ADDR_BITS_SHIFT 10
+#define SFC_CTRL_DATA_BITS_SHIFT 12
+
+/* Interrupt mask */
+#define SFC_IMR 0x4
+#define SFC_IMR_RX_FULL BIT(0)
+#define SFC_IMR_RX_UFLOW BIT(1)
+#define SFC_IMR_TX_OFLOW BIT(2)
+#define SFC_IMR_TX_EMPTY BIT(3)
+#define SFC_IMR_TRAN_FINISH BIT(4)
+#define SFC_IMR_BUS_ERR BIT(5)
+#define SFC_IMR_NSPI_ERR BIT(6)
+#define SFC_IMR_DMA BIT(7)
+
+/* Interrupt clear */
+#define SFC_ICLR 0x8
+#define SFC_ICLR_RX_FULL BIT(0)
+#define SFC_ICLR_RX_UFLOW BIT(1)
+#define SFC_ICLR_TX_OFLOW BIT(2)
+#define SFC_ICLR_TX_EMPTY BIT(3)
+#define SFC_ICLR_TRAN_FINISH BIT(4)
+#define SFC_ICLR_BUS_ERR BIT(5)
+#define SFC_ICLR_NSPI_ERR BIT(6)
+#define SFC_ICLR_DMA BIT(7)
+
+/* FIFO threshold level */
+#define SFC_FTLR 0xc
+#define SFC_FTLR_TX_SHIFT 0
+#define SFC_FTLR_TX_MASK 0x1f
+#define SFC_FTLR_RX_SHIFT 8
+#define SFC_FTLR_RX_MASK 0x1f
+
+/* Reset FSM and FIFO */
+#define SFC_RCVR 0x10
+#define SFC_RCVR_RESET BIT(0)
+
+/* Enhanced mode */
+#define SFC_AX 0x14
+
+/* Address Bit number */
+#define SFC_ABIT 0x18
+
+/* Interrupt status */
+#define SFC_ISR 0x1c
+#define SFC_ISR_RX_FULL_SHIFT BIT(0)
+#define SFC_ISR_RX_UFLOW_SHIFT BIT(1)
+#define SFC_ISR_TX_OFLOW_SHIFT BIT(2)
+#define SFC_ISR_TX_EMPTY_SHIFT BIT(3)
+#define SFC_ISR_TX_FINISH_SHIFT BIT(4)
+#define SFC_ISR_BUS_ERR_SHIFT BIT(5)
+#define SFC_ISR_NSPI_ERR_SHIFT BIT(6)
+#define SFC_ISR_DMA_SHIFT BIT(7)
+
+/* FIFO status */
+#define SFC_FSR 0x20
+#define SFC_FSR_TX_IS_FULL BIT(0)
+#define SFC_FSR_TX_IS_EMPTY BIT(1)
+#define SFC_FSR_RX_IS_EMPTY BIT(2)
+#define SFC_FSR_RX_IS_FULL BIT(3)
+#define SFC_FSR_TXLV_MASK GENMASK(12, 8)
+#define SFC_FSR_TXLV_SHIFT 8
+#define SFC_FSR_RXLV_MASK GENMASK(20, 16)
+#define SFC_FSR_RXLV_SHIFT 16
+
+/* FSM status */
+#define SFC_SR 0x24
+#define SFC_SR_IS_IDLE 0x0
+#define SFC_SR_IS_BUSY 0x1
+
+/* Raw interrupt status */
+#define SFC_RISR 0x28
+#define SFC_RISR_RX_FULL BIT(0)
+#define SFC_RISR_RX_UNDERFLOW BIT(1)
+#define SFC_RISR_TX_OVERFLOW BIT(2)
+#define SFC_RISR_TX_EMPTY BIT(3)
+#define SFC_RISR_TRAN_FINISH BIT(4)
+#define SFC_RISR_BUS_ERR BIT(5)
+#define SFC_RISR_NSPI_ERR BIT(6)
+#define SFC_RISR_DMA BIT(7)
+
+/* Version */
+#define SFC_VER 0x2C
+#define SFC_VER_3 0x3
+#define SFC_VER_4 0x4
+#define SFC_VER_5 0x5
+
+/* Delay line controller resiter */
+#define SFC_DLL_CTRL0 0x3C
+#define SFC_DLL_CTRL0_SCLK_SMP_DLL BIT(15)
+#define SFC_DLL_CTRL0_DLL_MAX_VER4 0xFFU
+#define SFC_DLL_CTRL0_DLL_MAX_VER5 0x1FFU
+
+/* Master trigger */
+#define SFC_DMA_TRIGGER 0x80
+#define SFC_DMA_TRIGGER_START 1
+
+/* Src or Dst addr for master */
+#define SFC_DMA_ADDR 0x84
+
+/* Length control register extension 32GB */
+#define SFC_LEN_CTRL 0x88
+#define SFC_LEN_CTRL_TRB_SEL 1
+#define SFC_LEN_EXT 0x8C
+
+/* Command */
+#define SFC_CMD 0x100
+#define SFC_CMD_IDX_SHIFT 0
+#define SFC_CMD_DUMMY_SHIFT 8
+#define SFC_CMD_DIR_SHIFT 12
+#define SFC_CMD_DIR_RD 0
+#define SFC_CMD_DIR_WR 1
+#define SFC_CMD_ADDR_SHIFT 14
+#define SFC_CMD_ADDR_0BITS 0
+#define SFC_CMD_ADDR_24BITS 1
+#define SFC_CMD_ADDR_32BITS 2
+#define SFC_CMD_ADDR_XBITS 3
+#define SFC_CMD_TRAN_BYTES_SHIFT 16
+#define SFC_CMD_CS_SHIFT 30
+
+/* Address */
+#define SFC_ADDR 0x104
+
+/* Data */
+#define SFC_DATA 0x108
+
+/* The controller and documentation reports that it supports up to 4 CS
+ * devices (0-3), however I have only been able to test a single CS (CS 0)
+ * due to the configuration of my device.
+ */
+#define SFC_MAX_CHIPSELECT_NUM 4
+
+/* The SFC can transfer max 16KB - 1 at one time
+ * we set it to 15.5KB here for alignment.
+ */
+#define SFC_MAX_IOSIZE_VER3 (512 * 31)
+
+/* DMA is only enabled for large data transmission */
+#define SFC_DMA_TRANS_THRETHOLD (0x40)
+
+/* Maximum clock values from datasheet suggest keeping clock value under
+ * 150MHz. No minimum or average value is suggested.
+ */
+#define SFC_MAX_SPEED (150 * 1000 * 1000)
+
+struct rockchip_sfc {
+ struct device *dev;
+ void __iomem *regbase;
+ struct clk *hclk;
+ struct clk *clk;
+ u32 frequency;
+ /* virtual mapped addr for dma_buffer */
+ void *buffer;
+ dma_addr_t dma_buffer;
+ struct completion cp;
+ bool use_dma;
+ u32 max_iosize;
+ u16 version;
+};
+
+static int rockchip_sfc_reset(struct rockchip_sfc *sfc)
+{
+ int err;
+ u32 status;
+
+ writel_relaxed(SFC_RCVR_RESET, sfc->regbase + SFC_RCVR);
+
+ err = readl_poll_timeout(sfc->regbase + SFC_RCVR, status,
+ !(status & SFC_RCVR_RESET), 20,
+ jiffies_to_usecs(HZ));
+ if (err)
+ dev_err(sfc->dev, "SFC reset never finished\n");
+
+ /* Still need to clear the masked interrupt from RISR */
+ writel_relaxed(0xFFFFFFFF, sfc->regbase + SFC_ICLR);
+
+ dev_dbg(sfc->dev, "reset\n");
+
+ return err;
+}
+
+static u16 rockchip_sfc_get_version(struct rockchip_sfc *sfc)
+{
+ return (u16)(readl(sfc->regbase + SFC_VER) & 0xffff);
+}
+
+static u32 rockchip_sfc_get_max_iosize(struct rockchip_sfc *sfc)
+{
+ return SFC_MAX_IOSIZE_VER3;
+}
+
+static void rockchip_sfc_irq_unmask(struct rockchip_sfc *sfc, u32 mask)
+{
+ u32 reg;
+
+ /* Enable transfer complete interrupt */
+ reg = readl(sfc->regbase + SFC_IMR);
+ reg &= ~mask;
+ writel(reg, sfc->regbase + SFC_IMR);
+}
+
+static void rockchip_sfc_irq_mask(struct rockchip_sfc *sfc, u32 mask)
+{
+ u32 reg;
+
+ /* Disable transfer finish interrupt */
+ reg = readl(sfc->regbase + SFC_IMR);
+ reg |= mask;
+ writel(reg, sfc->regbase + SFC_IMR);
+}
+
+static int rockchip_sfc_init(struct rockchip_sfc *sfc)
+{
+ writel(0, sfc->regbase + SFC_CTRL);
+ writel(0xFFFFFFFF, sfc->regbase + SFC_ICLR);
+ rockchip_sfc_irq_mask(sfc, 0xFFFFFFFF);
+ if (rockchip_sfc_get_version(sfc) >= SFC_VER_4)
+ writel(SFC_LEN_CTRL_TRB_SEL, sfc->regbase + SFC_LEN_CTRL);
+
+ return 0;
+}
+
+static int rockchip_sfc_wait_txfifo_ready(struct rockchip_sfc *sfc, u32 timeout_us)
+{
+ int ret = 0;
+ u32 status;
+
+ ret = readl_poll_timeout(sfc->regbase + SFC_FSR, status,
+ status & SFC_FSR_TXLV_MASK, 0,
+ timeout_us);
+ if (ret) {
+ dev_dbg(sfc->dev, "sfc wait tx fifo timeout\n");
+
+ return -ETIMEDOUT;
+ }
+
+ return (status & SFC_FSR_TXLV_MASK) >> SFC_FSR_TXLV_SHIFT;
+}
+
+static int rockchip_sfc_wait_rxfifo_ready(struct rockchip_sfc *sfc, u32 timeout_us)
+{
+ int ret = 0;
+ u32 status;
+
+ ret = readl_poll_timeout(sfc->regbase + SFC_FSR, status,
+ status & SFC_FSR_RXLV_MASK, 0,
+ timeout_us);
+ if (ret) {
+ dev_dbg(sfc->dev, "sfc wait rx fifo timeout\n");
+
+ return -ETIMEDOUT;
+ }
+
+ return (status & SFC_FSR_RXLV_MASK) >> SFC_FSR_RXLV_SHIFT;
+}
+
+static void rockchip_sfc_adjust_op_work(struct spi_mem_op *op)
+{
+ if (unlikely(op->dummy.nbytes && !op->addr.nbytes)) {
+ /*
+ * SFC not support output DUMMY cycles right after CMD cycles, so
+ * treat it as ADDR cycles.
+ */
+ op->addr.nbytes = op->dummy.nbytes;
+ op->addr.buswidth = op->dummy.buswidth;
+ op->addr.val = 0xFFFFFFFFF;
+
+ op->dummy.nbytes = 0;
+ }
+}
+
+static int rockchip_sfc_xfer_setup(struct rockchip_sfc *sfc,
+ struct spi_mem *mem,
+ const struct spi_mem_op *op,
+ u32 len)
+{
+ u32 ctrl = 0, cmd = 0;
+
+ /* set CMD */
+ cmd = op->cmd.opcode;
+ ctrl |= ((op->cmd.buswidth >> 1) << SFC_CTRL_CMD_BITS_SHIFT);
+
+ /* set ADDR */
+ if (op->addr.nbytes) {
+ if (op->addr.nbytes == 4) {
+ cmd |= SFC_CMD_ADDR_32BITS << SFC_CMD_ADDR_SHIFT;
+ } else if (op->addr.nbytes == 3) {
+ cmd |= SFC_CMD_ADDR_24BITS << SFC_CMD_ADDR_SHIFT;
+ } else {
+ cmd |= SFC_CMD_ADDR_XBITS << SFC_CMD_ADDR_SHIFT;
+ writel(op->addr.nbytes * 8 - 1, sfc->regbase + SFC_ABIT);
+ }
+
+ ctrl |= ((op->addr.buswidth >> 1) << SFC_CTRL_ADDR_BITS_SHIFT);
+ }
+
+ /* set DUMMY */
+ if (op->dummy.nbytes) {
+ if (op->dummy.buswidth == 4)
+ cmd |= op->dummy.nbytes * 2 << SFC_CMD_DUMMY_SHIFT;
+ else if (op->dummy.buswidth == 2)
+ cmd |= op->dummy.nbytes * 4 << SFC_CMD_DUMMY_SHIFT;
+ else
+ cmd |= op->dummy.nbytes * 8 << SFC_CMD_DUMMY_SHIFT;
+ }
+
+ /* set DATA */
+ if (sfc->version >= SFC_VER_4) /* Clear it if no data to transfer */
+ writel(len, sfc->regbase + SFC_LEN_EXT);
+ else
+ cmd |= len << SFC_CMD_TRAN_BYTES_SHIFT;
+ if (len) {
+ if (op->data.dir == SPI_MEM_DATA_OUT)
+ cmd |= SFC_CMD_DIR_WR << SFC_CMD_DIR_SHIFT;
+
+ ctrl |= ((op->data.buswidth >> 1) << SFC_CTRL_DATA_BITS_SHIFT);
+ }
+ if (!len && op->addr.nbytes)
+ cmd |= SFC_CMD_DIR_WR << SFC_CMD_DIR_SHIFT;
+
+ /* set the Controller */
+ ctrl |= SFC_CTRL_PHASE_SEL_NEGETIVE;
+ cmd |= mem->spi->chip_select << SFC_CMD_CS_SHIFT;
+
+ dev_dbg(sfc->dev, "sfc addr.nbytes=%x(x%d) dummy.nbytes=%x(x%d)\n",
+ op->addr.nbytes, op->addr.buswidth,
+ op->dummy.nbytes, op->dummy.buswidth);
+ dev_dbg(sfc->dev, "sfc ctrl=%x cmd=%x addr=%llx len=%x\n",
+ ctrl, cmd, op->addr.val, len);
+
+ writel(ctrl, sfc->regbase + SFC_CTRL);
+ writel(cmd, sfc->regbase + SFC_CMD);
+ if (op->addr.nbytes)
+ writel(op->addr.val, sfc->regbase + SFC_ADDR);
+
+ return 0;
+}
+
+static int rockchip_sfc_write_fifo(struct rockchip_sfc *sfc, const u8 *buf, int len)
+{
+ u8 bytes = len & 0x3;
+ u32 dwords;
+ int tx_level;
+ u32 write_words;
+ u32 tmp = 0;
+
+ dwords = len >> 2;
+ while (dwords) {
+ tx_level = rockchip_sfc_wait_txfifo_ready(sfc, 1000);
+ if (tx_level < 0)
+ return tx_level;
+ write_words = min_t(u32, tx_level, dwords);
+ iowrite32_rep(sfc->regbase + SFC_DATA, buf, write_words);
+ buf += write_words << 2;
+ dwords -= write_words;
+ }
+
+ /* write the rest non word aligned bytes */
+ if (bytes) {
+ tx_level = rockchip_sfc_wait_txfifo_ready(sfc, 1000);
+ if (tx_level < 0)
+ return tx_level;
+ memcpy(&tmp, buf, bytes);
+ writel(tmp, sfc->regbase + SFC_DATA);
+ }
+
+ return len;
+}
+
+static int rockchip_sfc_read_fifo(struct rockchip_sfc *sfc, u8 *buf, int len)
+{
+ u8 bytes = len & 0x3;
+ u32 dwords;
+ u8 read_words;
+ int rx_level;
+ int tmp;
+
+ /* word aligned access only */
+ dwords = len >> 2;
+ while (dwords) {
+ rx_level = rockchip_sfc_wait_rxfifo_ready(sfc, 1000);
+ if (rx_level < 0)
+ return rx_level;
+ read_words = min_t(u32, rx_level, dwords);
+ ioread32_rep(sfc->regbase + SFC_DATA, buf, read_words);
+ buf += read_words << 2;
+ dwords -= read_words;
+ }
+
+ /* read the rest non word aligned bytes */
+ if (bytes) {
+ rx_level = rockchip_sfc_wait_rxfifo_ready(sfc, 1000);
+ if (rx_level < 0)
+ return rx_level;
+ tmp = readl(sfc->regbase + SFC_DATA);
+ memcpy(buf, &tmp, bytes);
+ }
+
+ return len;
+}
+
+static int rockchip_sfc_fifo_transfer_dma(struct rockchip_sfc *sfc, dma_addr_t dma_buf, size_t len)
+{
+ writel(0xFFFFFFFF, sfc->regbase + SFC_ICLR);
+ writel((u32)dma_buf, sfc->regbase + SFC_DMA_ADDR);
+ writel(SFC_DMA_TRIGGER_START, sfc->regbase + SFC_DMA_TRIGGER);
+
+ return len;
+}
+
+static int rockchip_sfc_xfer_data_poll(struct rockchip_sfc *sfc,
+ const struct spi_mem_op *op, u32 len)
+{
+ dev_dbg(sfc->dev, "sfc xfer_poll len=%x\n", len);
+
+ if (op->data.dir == SPI_MEM_DATA_OUT)
+ return rockchip_sfc_write_fifo(sfc, op->data.buf.out, len);
+ else
+ return rockchip_sfc_read_fifo(sfc, op->data.buf.in, len);
+}
+
+static int rockchip_sfc_xfer_data_dma(struct rockchip_sfc *sfc,
+ const struct spi_mem_op *op, u32 len)
+{
+ int ret;
+
+ dev_dbg(sfc->dev, "sfc xfer_dma len=%x\n", len);
+
+ if (op->data.dir == SPI_MEM_DATA_OUT)
+ memcpy(sfc->buffer, op->data.buf.out, len);
+
+ ret = rockchip_sfc_fifo_transfer_dma(sfc, sfc->dma_buffer, len);
+ if (!wait_for_completion_timeout(&sfc->cp, msecs_to_jiffies(2000))) {
+ dev_err(sfc->dev, "DMA wait for transfer finish timeout\n");
+ ret = -ETIMEDOUT;
+ }
+ rockchip_sfc_irq_mask(sfc, SFC_IMR_DMA);
+ if (op->data.dir == SPI_MEM_DATA_IN)
+ memcpy(op->data.buf.in, sfc->buffer, len);
+
+ return ret;
+}
+
+static int rockchip_sfc_xfer_done(struct rockchip_sfc *sfc, u32 timeout_us)
+{
+ int ret = 0;
+ u32 status;
+
+ ret = readl_poll_timeout(sfc->regbase + SFC_SR, status,
+ !(status & SFC_SR_IS_BUSY),
+ 20, timeout_us);
+ if (ret) {
+ dev_err(sfc->dev, "wait sfc idle timeout\n");
+ rockchip_sfc_reset(sfc);
+
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static int rockchip_sfc_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+ struct rockchip_sfc *sfc = spi_master_get_devdata(mem->spi->master);
+ u32 len = op->data.nbytes;
+ int ret;
+
+ if (unlikely(mem->spi->max_speed_hz != sfc->frequency)) {
+ ret = clk_set_rate(sfc->clk, mem->spi->max_speed_hz);
+ if (ret)
+ return ret;
+ sfc->frequency = mem->spi->max_speed_hz;
+ dev_dbg(sfc->dev, "set_freq=%dHz real_freq=%ldHz\n",
+ sfc->frequency, clk_get_rate(sfc->clk));
+ }
+
+ rockchip_sfc_adjust_op_work((struct spi_mem_op *)op);
+ rockchip_sfc_xfer_setup(sfc, mem, op, len);
+ if (len) {
+ if (likely(sfc->use_dma) && len >= SFC_DMA_TRANS_THRETHOLD) {
+ init_completion(&sfc->cp);
+ rockchip_sfc_irq_unmask(sfc, SFC_IMR_DMA);
+ ret = rockchip_sfc_xfer_data_dma(sfc, op, len);
+ } else {
+ ret = rockchip_sfc_xfer_data_poll(sfc, op, len);
+ }
+
+ if (ret != len) {
+ dev_err(sfc->dev, "xfer data failed ret %d dir %d\n", ret, op->data.dir);
+
+ return -EIO;
+ }
+ }
+
+ return rockchip_sfc_xfer_done(sfc, 100000);
+}
+
+static int rockchip_sfc_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
+{
+ struct rockchip_sfc *sfc = spi_master_get_devdata(mem->spi->master);
+
+ op->data.nbytes = min(op->data.nbytes, sfc->max_iosize);
+
+ return 0;
+}
+
+static const struct spi_controller_mem_ops rockchip_sfc_mem_ops = {
+ .exec_op = rockchip_sfc_exec_mem_op,
+ .adjust_op_size = rockchip_sfc_adjust_op_size,
+};
+
+static irqreturn_t rockchip_sfc_irq_handler(int irq, void *dev_id)
+{
+ struct rockchip_sfc *sfc = dev_id;
+ u32 reg;
+
+ reg = readl(sfc->regbase + SFC_RISR);
+
+ /* Clear interrupt */
+ writel_relaxed(reg, sfc->regbase + SFC_ICLR);
+
+ if (reg & SFC_RISR_DMA) {
+ complete(&sfc->cp);
+
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static int rockchip_sfc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct spi_master *master;
+ struct resource *res;
+ struct rockchip_sfc *sfc;
+ int ret;
+
+ master = devm_spi_alloc_master(&pdev->dev, sizeof(*sfc));
+ if (!master)
+ return -ENOMEM;
+
+ master->flags = SPI_MASTER_HALF_DUPLEX;
+ master->mem_ops = &rockchip_sfc_mem_ops;
+ master->dev.of_node = pdev->dev.of_node;
+ master->mode_bits = SPI_TX_QUAD | SPI_TX_DUAL | SPI_RX_QUAD | SPI_RX_DUAL;
+ master->max_speed_hz = SFC_MAX_SPEED;
+ master->num_chipselect = SFC_MAX_CHIPSELECT_NUM;
+
+ sfc = spi_master_get_devdata(master);
+ sfc->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sfc->regbase = devm_ioremap_resource(dev, res);
+ if (IS_ERR(sfc->regbase))
+ return PTR_ERR(sfc->regbase);
+
+ sfc->clk = devm_clk_get(&pdev->dev, "clk_sfc");
+ if (IS_ERR(sfc->clk)) {
+ dev_err(&pdev->dev, "Failed to get sfc interface clk\n");
+ return PTR_ERR(sfc->clk);
+ }
+
+ sfc->hclk = devm_clk_get(&pdev->dev, "hclk_sfc");
+ if (IS_ERR(sfc->hclk)) {
+ dev_err(&pdev->dev, "Failed to get sfc ahb clk\n");
+ return PTR_ERR(sfc->hclk);
+ }
+
+ sfc->use_dma = !of_property_read_bool(sfc->dev->of_node,
+ "rockchip,sfc-no-dma");
+
+ if (sfc->use_dma) {
+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_warn(dev, "Unable to set dma mask\n");
+ return ret;
+ }
+
+ sfc->buffer = dmam_alloc_coherent(dev, SFC_MAX_IOSIZE_VER3,
+ &sfc->dma_buffer,
+ GFP_KERNEL);
+ if (!sfc->buffer)
+ return -ENOMEM;
+ }
+
+ ret = clk_prepare_enable(sfc->hclk);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to enable ahb clk\n");
+ goto err_hclk;
+ }
+
+ ret = clk_prepare_enable(sfc->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to enable interface clk\n");
+ goto err_clk;
+ }
+
+ /* Find the irq */
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
+ dev_err(dev, "Failed to get the irq\n");
+ goto err_irq;
+ }
+
+ ret = devm_request_irq(dev, ret, rockchip_sfc_irq_handler,
+ 0, pdev->name, sfc);
+ if (ret) {
+ dev_err(dev, "Failed to request irq\n");
+
+ return ret;
+ }
+
+ ret = rockchip_sfc_init(sfc);
+ if (ret)
+ goto err_irq;
+
+ sfc->max_iosize = rockchip_sfc_get_max_iosize(sfc);
+ sfc->version = rockchip_sfc_get_version(sfc);
+
+ ret = spi_register_master(master);
+ if (ret)
+ goto err_irq;
+
+ return 0;
+
+err_irq:
+ clk_disable_unprepare(sfc->clk);
+err_clk:
+ clk_disable_unprepare(sfc->hclk);
+err_hclk:
+ return ret;
+}
+
+static int rockchip_sfc_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct rockchip_sfc *sfc = platform_get_drvdata(pdev);
+
+ spi_unregister_master(master);
+
+ clk_disable_unprepare(sfc->clk);
+ clk_disable_unprepare(sfc->hclk);
+
+ return 0;
+}
+
+static const struct of_device_id rockchip_sfc_dt_ids[] = {
+ { .compatible = "rockchip,sfc"},
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rockchip_sfc_dt_ids);
+
+static struct platform_driver rockchip_sfc_driver = {
+ .driver = {
+ .name = "rockchip-sfc",
+ .of_match_table = rockchip_sfc_dt_ids,
+ },
+ .probe = rockchip_sfc_probe,
+ .remove = rockchip_sfc_remove,
+};
+module_platform_driver(rockchip_sfc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Rockchip Serial Flash Controller Driver");
+MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>");
+MODULE_AUTHOR("Chris Morgan <macromorgan@hotmail.com>");
+MODULE_AUTHOR("Jon Lin <Jon.lin@rock-chips.com>");
diff --git a/drivers/spi/spi-sprd-adi.c b/drivers/spi/spi-sprd-adi.c
index ab19068be867..1edbf44c05a7 100644
--- a/drivers/spi/spi-sprd-adi.c
+++ b/drivers/spi/spi-sprd-adi.c
@@ -52,10 +52,20 @@
/*
* ADI slave devices include RTC, ADC, regulator, charger, thermal and so on.
- * The slave devices address offset is always 0x8000 and size is 4K.
+ * ADI supports 12/14bit address for r2p0, and additional 17bit for r3p0 or
+ * later versions. Since bit[1:0] are zero, so the spec describe them as
+ * 10/12/15bit address mode.
+ * The 10bit mode supports sigle slave, 12/15bit mode supports 3 slave, the
+ * high two bits is slave_id.
+ * The slave devices address offset is 0x8000 for 10/12bit address mode,
+ * and 0x20000 for 15bit mode.
*/
-#define ADI_SLAVE_ADDR_SIZE SZ_4K
-#define ADI_SLAVE_OFFSET 0x8000
+#define ADI_10BIT_SLAVE_ADDR_SIZE SZ_4K
+#define ADI_10BIT_SLAVE_OFFSET 0x8000
+#define ADI_12BIT_SLAVE_ADDR_SIZE SZ_16K
+#define ADI_12BIT_SLAVE_OFFSET 0x8000
+#define ADI_15BIT_SLAVE_ADDR_SIZE SZ_128K
+#define ADI_15BIT_SLAVE_OFFSET 0x20000
/* Timeout (ms) for the trylock of hardware spinlocks */
#define ADI_HWSPINLOCK_TIMEOUT 5000
@@ -67,24 +77,35 @@
#define ADI_FIFO_DRAIN_TIMEOUT 1000
#define ADI_READ_TIMEOUT 2000
-#define REG_ADDR_LOW_MASK GENMASK(11, 0)
+
+/*
+ * Read back address from REG_ADI_RD_DATA bit[30:16] which maps to:
+ * REG_ADI_RD_CMD bit[14:0] for r2p0
+ * REG_ADI_RD_CMD bit[16:2] for r3p0
+ */
+#define RDBACK_ADDR_MASK_R2 GENMASK(14, 0)
+#define RDBACK_ADDR_MASK_R3 GENMASK(16, 2)
+#define RDBACK_ADDR_SHIFT_R3 2
/* Registers definitions for PMIC watchdog controller */
-#define REG_WDG_LOAD_LOW 0x80
-#define REG_WDG_LOAD_HIGH 0x84
-#define REG_WDG_CTRL 0x88
-#define REG_WDG_LOCK 0xa0
+#define REG_WDG_LOAD_LOW 0x0
+#define REG_WDG_LOAD_HIGH 0x4
+#define REG_WDG_CTRL 0x8
+#define REG_WDG_LOCK 0x20
/* Bits definitions for register REG_WDG_CTRL */
#define BIT_WDG_RUN BIT(1)
#define BIT_WDG_NEW BIT(2)
#define BIT_WDG_RST BIT(3)
+/* Bits definitions for register REG_MODULE_EN */
+#define BIT_WDG_EN BIT(2)
+
/* Registers definitions for PMIC */
#define PMIC_RST_STATUS 0xee8
#define PMIC_MODULE_EN 0xc08
#define PMIC_CLK_EN 0xc18
-#define BIT_WDG_EN BIT(2)
+#define PMIC_WDG_BASE 0x80
/* Definition of PMIC reset status register */
#define HWRST_STATUS_SECURITY 0x02
@@ -103,10 +124,26 @@
#define HWRST_STATUS_WATCHDOG 0xf0
/* Use default timeout 50 ms that converts to watchdog values */
-#define WDG_LOAD_VAL ((50 * 1000) / 32768)
+#define WDG_LOAD_VAL ((50 * 32768) / 1000)
#define WDG_LOAD_MASK GENMASK(15, 0)
#define WDG_UNLOCK_KEY 0xe551
+struct sprd_adi_wdg {
+ u32 base;
+ u32 rst_sts;
+ u32 wdg_en;
+ u32 wdg_clk;
+};
+
+struct sprd_adi_data {
+ u32 slave_offset;
+ u32 slave_addr_size;
+ int (*read_check)(u32 val, u32 reg);
+ int (*restart)(struct notifier_block *this,
+ unsigned long mode, void *cmd);
+ void (*wdg_rst)(void *p);
+};
+
struct sprd_adi {
struct spi_controller *ctlr;
struct device *dev;
@@ -115,26 +152,21 @@ struct sprd_adi {
unsigned long slave_vbase;
unsigned long slave_pbase;
struct notifier_block restart_handler;
+ const struct sprd_adi_data *data;
};
-static int sprd_adi_check_paddr(struct sprd_adi *sadi, u32 paddr)
+static int sprd_adi_check_addr(struct sprd_adi *sadi, u32 reg)
{
- if (paddr < sadi->slave_pbase || paddr >
- (sadi->slave_pbase + ADI_SLAVE_ADDR_SIZE)) {
+ if (reg >= sadi->data->slave_addr_size) {
dev_err(sadi->dev,
- "slave physical address is incorrect, addr = 0x%x\n",
- paddr);
+ "slave address offset is incorrect, reg = 0x%x\n",
+ reg);
return -EINVAL;
}
return 0;
}
-static unsigned long sprd_adi_to_vaddr(struct sprd_adi *sadi, u32 paddr)
-{
- return (paddr - sadi->slave_pbase + sadi->slave_vbase);
-}
-
static int sprd_adi_drain_fifo(struct sprd_adi *sadi)
{
u32 timeout = ADI_FIFO_DRAIN_TIMEOUT;
@@ -161,11 +193,35 @@ static int sprd_adi_fifo_is_full(struct sprd_adi *sadi)
return readl_relaxed(sadi->base + REG_ADI_ARM_FIFO_STS) & BIT_FIFO_FULL;
}
-static int sprd_adi_read(struct sprd_adi *sadi, u32 reg_paddr, u32 *read_val)
+static int sprd_adi_read_check(u32 val, u32 addr)
+{
+ u32 rd_addr;
+
+ rd_addr = (val & RD_ADDR_MASK) >> RD_ADDR_SHIFT;
+
+ if (rd_addr != addr) {
+ pr_err("ADI read error, addr = 0x%x, val = 0x%x\n", addr, val);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int sprd_adi_read_check_r2(u32 val, u32 reg)
+{
+ return sprd_adi_read_check(val, reg & RDBACK_ADDR_MASK_R2);
+}
+
+static int sprd_adi_read_check_r3(u32 val, u32 reg)
+{
+ return sprd_adi_read_check(val, (reg & RDBACK_ADDR_MASK_R3) >> RDBACK_ADDR_SHIFT_R3);
+}
+
+static int sprd_adi_read(struct sprd_adi *sadi, u32 reg, u32 *read_val)
{
int read_timeout = ADI_READ_TIMEOUT;
unsigned long flags;
- u32 val, rd_addr;
+ u32 val;
int ret = 0;
if (sadi->hwlock) {
@@ -178,11 +234,15 @@ static int sprd_adi_read(struct sprd_adi *sadi, u32 reg_paddr, u32 *read_val)
}
}
+ ret = sprd_adi_check_addr(sadi, reg);
+ if (ret)
+ goto out;
+
/*
- * Set the physical register address need to read into RD_CMD register,
+ * Set the slave address offset need to read into RD_CMD register,
* then ADI controller will start to transfer automatically.
*/
- writel_relaxed(reg_paddr, sadi->base + REG_ADI_RD_CMD);
+ writel_relaxed(reg, sadi->base + REG_ADI_RD_CMD);
/*
* Wait read operation complete, the BIT_RD_CMD_BUSY will be set
@@ -205,18 +265,15 @@ static int sprd_adi_read(struct sprd_adi *sadi, u32 reg_paddr, u32 *read_val)
}
/*
- * The return value includes data and read register address, from bit 0
- * to bit 15 are data, and from bit 16 to bit 30 are read register
- * address. Then we can check the returned register address to validate
- * data.
+ * The return value before adi r5p0 includes data and read register
+ * address, from bit 0to bit 15 are data, and from bit 16 to bit 30
+ * are read register address. Then we can check the returned register
+ * address to validate data.
*/
- rd_addr = (val & RD_ADDR_MASK) >> RD_ADDR_SHIFT;
-
- if (rd_addr != (reg_paddr & REG_ADDR_LOW_MASK)) {
- dev_err(sadi->dev, "read error, reg addr = 0x%x, val = 0x%x\n",
- reg_paddr, val);
- ret = -EIO;
- goto out;
+ if (sadi->data->read_check) {
+ ret = sadi->data->read_check(val, reg);
+ if (ret < 0)
+ goto out;
}
*read_val = val & RD_VALUE_MASK;
@@ -227,9 +284,8 @@ out:
return ret;
}
-static int sprd_adi_write(struct sprd_adi *sadi, u32 reg_paddr, u32 val)
+static int sprd_adi_write(struct sprd_adi *sadi, u32 reg, u32 val)
{
- unsigned long reg = sprd_adi_to_vaddr(sadi, reg_paddr);
u32 timeout = ADI_FIFO_DRAIN_TIMEOUT;
unsigned long flags;
int ret;
@@ -244,6 +300,10 @@ static int sprd_adi_write(struct sprd_adi *sadi, u32 reg_paddr, u32 val)
}
}
+ ret = sprd_adi_check_addr(sadi, reg);
+ if (ret)
+ goto out;
+
ret = sprd_adi_drain_fifo(sadi);
if (ret < 0)
goto out;
@@ -254,7 +314,8 @@ static int sprd_adi_write(struct sprd_adi *sadi, u32 reg_paddr, u32 val)
*/
do {
if (!sprd_adi_fifo_is_full(sadi)) {
- writel_relaxed(val, (void __iomem *)reg);
+ /* we need virtual register address to write. */
+ writel_relaxed(val, (void __iomem *)(sadi->slave_vbase + reg));
break;
}
@@ -277,60 +338,41 @@ static int sprd_adi_transfer_one(struct spi_controller *ctlr,
struct spi_transfer *t)
{
struct sprd_adi *sadi = spi_controller_get_devdata(ctlr);
- u32 phy_reg, val;
+ u32 reg, val;
int ret;
if (t->rx_buf) {
- phy_reg = *(u32 *)t->rx_buf + sadi->slave_pbase;
-
- ret = sprd_adi_check_paddr(sadi, phy_reg);
- if (ret)
- return ret;
-
- ret = sprd_adi_read(sadi, phy_reg, &val);
- if (ret)
- return ret;
-
+ reg = *(u32 *)t->rx_buf;
+ ret = sprd_adi_read(sadi, reg, &val);
*(u32 *)t->rx_buf = val;
} else if (t->tx_buf) {
u32 *p = (u32 *)t->tx_buf;
-
- /*
- * Get the physical register address need to write and convert
- * the physical address to virtual address. Since we need
- * virtual register address to write.
- */
- phy_reg = *p++ + sadi->slave_pbase;
- ret = sprd_adi_check_paddr(sadi, phy_reg);
- if (ret)
- return ret;
-
+ reg = *p++;
val = *p;
- ret = sprd_adi_write(sadi, phy_reg, val);
- if (ret)
- return ret;
+ ret = sprd_adi_write(sadi, reg, val);
} else {
dev_err(sadi->dev, "no buffer for transfer\n");
- return -EINVAL;
+ ret = -EINVAL;
}
- return 0;
+ return ret;
}
-static void sprd_adi_set_wdt_rst_mode(struct sprd_adi *sadi)
+static void sprd_adi_set_wdt_rst_mode(void *p)
{
#if IS_ENABLED(CONFIG_SPRD_WATCHDOG)
u32 val;
+ struct sprd_adi *sadi = (struct sprd_adi *)p;
- /* Set default watchdog reboot mode */
- sprd_adi_read(sadi, sadi->slave_pbase + PMIC_RST_STATUS, &val);
+ /* Init watchdog reset mode */
+ sprd_adi_read(sadi, PMIC_RST_STATUS, &val);
val |= HWRST_STATUS_WATCHDOG;
- sprd_adi_write(sadi, sadi->slave_pbase + PMIC_RST_STATUS, val);
+ sprd_adi_write(sadi, PMIC_RST_STATUS, val);
#endif
}
-static int sprd_adi_restart_handler(struct notifier_block *this,
- unsigned long mode, void *cmd)
+static int sprd_adi_restart(struct notifier_block *this, unsigned long mode,
+ void *cmd, struct sprd_adi_wdg *wdg)
{
struct sprd_adi *sadi = container_of(this, struct sprd_adi,
restart_handler);
@@ -366,40 +408,40 @@ static int sprd_adi_restart_handler(struct notifier_block *this,
reboot_mode = HWRST_STATUS_NORMAL;
/* Record the reboot mode */
- sprd_adi_read(sadi, sadi->slave_pbase + PMIC_RST_STATUS, &val);
+ sprd_adi_read(sadi, wdg->rst_sts, &val);
val &= ~HWRST_STATUS_WATCHDOG;
val |= reboot_mode;
- sprd_adi_write(sadi, sadi->slave_pbase + PMIC_RST_STATUS, val);
+ sprd_adi_write(sadi, wdg->rst_sts, val);
/* Enable the interface clock of the watchdog */
- sprd_adi_read(sadi, sadi->slave_pbase + PMIC_MODULE_EN, &val);
+ sprd_adi_read(sadi, wdg->wdg_en, &val);
val |= BIT_WDG_EN;
- sprd_adi_write(sadi, sadi->slave_pbase + PMIC_MODULE_EN, val);
+ sprd_adi_write(sadi, wdg->wdg_en, val);
/* Enable the work clock of the watchdog */
- sprd_adi_read(sadi, sadi->slave_pbase + PMIC_CLK_EN, &val);
+ sprd_adi_read(sadi, wdg->wdg_clk, &val);
val |= BIT_WDG_EN;
- sprd_adi_write(sadi, sadi->slave_pbase + PMIC_CLK_EN, val);
+ sprd_adi_write(sadi, wdg->wdg_clk, val);
/* Unlock the watchdog */
- sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOCK, WDG_UNLOCK_KEY);
+ sprd_adi_write(sadi, wdg->base + REG_WDG_LOCK, WDG_UNLOCK_KEY);
- sprd_adi_read(sadi, sadi->slave_pbase + REG_WDG_CTRL, &val);
+ sprd_adi_read(sadi, wdg->base + REG_WDG_CTRL, &val);
val |= BIT_WDG_NEW;
- sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_CTRL, val);
+ sprd_adi_write(sadi, wdg->base + REG_WDG_CTRL, val);
/* Load the watchdog timeout value, 50ms is always enough. */
- sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOAD_HIGH, 0);
- sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOAD_LOW,
+ sprd_adi_write(sadi, wdg->base + REG_WDG_LOAD_HIGH, 0);
+ sprd_adi_write(sadi, wdg->base + REG_WDG_LOAD_LOW,
WDG_LOAD_VAL & WDG_LOAD_MASK);
/* Start the watchdog to reset system */
- sprd_adi_read(sadi, sadi->slave_pbase + REG_WDG_CTRL, &val);
+ sprd_adi_read(sadi, wdg->base + REG_WDG_CTRL, &val);
val |= BIT_WDG_RUN | BIT_WDG_RST;
- sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_CTRL, val);
+ sprd_adi_write(sadi, wdg->base + REG_WDG_CTRL, val);
/* Lock the watchdog */
- sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOCK, ~WDG_UNLOCK_KEY);
+ sprd_adi_write(sadi, wdg->base + REG_WDG_LOCK, ~WDG_UNLOCK_KEY);
mdelay(1000);
@@ -407,6 +449,19 @@ static int sprd_adi_restart_handler(struct notifier_block *this,
return NOTIFY_DONE;
}
+static int sprd_adi_restart_sc9860(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct sprd_adi_wdg wdg = {
+ .base = PMIC_WDG_BASE,
+ .rst_sts = PMIC_RST_STATUS,
+ .wdg_en = PMIC_MODULE_EN,
+ .wdg_clk = PMIC_CLK_EN,
+ };
+
+ return sprd_adi_restart(this, mode, cmd, &wdg);
+}
+
static void sprd_adi_hw_init(struct sprd_adi *sadi)
{
struct device_node *np = sadi->dev->of_node;
@@ -458,10 +513,11 @@ static void sprd_adi_hw_init(struct sprd_adi *sadi)
static int sprd_adi_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ const struct sprd_adi_data *data;
struct spi_controller *ctlr;
struct sprd_adi *sadi;
struct resource *res;
- u32 num_chipselect;
+ u16 num_chipselect;
int ret;
if (!np) {
@@ -469,6 +525,12 @@ static int sprd_adi_probe(struct platform_device *pdev)
return -ENODEV;
}
+ data = of_device_get_match_data(&pdev->dev);
+ if (!data) {
+ dev_err(&pdev->dev, "no matching driver data found\n");
+ return -EINVAL;
+ }
+
pdev->id = of_alias_get_id(np, "spi");
num_chipselect = of_get_child_count(np);
@@ -486,10 +548,12 @@ static int sprd_adi_probe(struct platform_device *pdev)
goto put_ctlr;
}
- sadi->slave_vbase = (unsigned long)sadi->base + ADI_SLAVE_OFFSET;
- sadi->slave_pbase = res->start + ADI_SLAVE_OFFSET;
+ sadi->slave_vbase = (unsigned long)sadi->base +
+ data->slave_offset;
+ sadi->slave_pbase = res->start + data->slave_offset;
sadi->ctlr = ctlr;
sadi->dev = &pdev->dev;
+ sadi->data = data;
ret = of_hwspin_lock_get_id(np, 0);
if (ret > 0 || (IS_ENABLED(CONFIG_HWSPINLOCK) && ret == 0)) {
sadi->hwlock =
@@ -510,7 +574,9 @@ static int sprd_adi_probe(struct platform_device *pdev)
}
sprd_adi_hw_init(sadi);
- sprd_adi_set_wdt_rst_mode(sadi);
+
+ if (sadi->data->wdg_rst)
+ sadi->data->wdg_rst(sadi);
ctlr->dev.of_node = pdev->dev.of_node;
ctlr->bus_num = pdev->id;
@@ -525,12 +591,14 @@ static int sprd_adi_probe(struct platform_device *pdev)
goto put_ctlr;
}
- sadi->restart_handler.notifier_call = sprd_adi_restart_handler;
- sadi->restart_handler.priority = 128;
- ret = register_restart_handler(&sadi->restart_handler);
- if (ret) {
- dev_err(&pdev->dev, "can not register restart handler\n");
- goto put_ctlr;
+ if (sadi->data->restart) {
+ sadi->restart_handler.notifier_call = sadi->data->restart;
+ sadi->restart_handler.priority = 128;
+ ret = register_restart_handler(&sadi->restart_handler);
+ if (ret) {
+ dev_err(&pdev->dev, "can not register restart handler\n");
+ goto put_ctlr;
+ }
}
return 0;
@@ -549,9 +617,38 @@ static int sprd_adi_remove(struct platform_device *pdev)
return 0;
}
+static struct sprd_adi_data sc9860_data = {
+ .slave_offset = ADI_10BIT_SLAVE_OFFSET,
+ .slave_addr_size = ADI_10BIT_SLAVE_ADDR_SIZE,
+ .read_check = sprd_adi_read_check_r2,
+ .restart = sprd_adi_restart_sc9860,
+ .wdg_rst = sprd_adi_set_wdt_rst_mode,
+};
+
+static struct sprd_adi_data sc9863_data = {
+ .slave_offset = ADI_12BIT_SLAVE_OFFSET,
+ .slave_addr_size = ADI_12BIT_SLAVE_ADDR_SIZE,
+ .read_check = sprd_adi_read_check_r3,
+};
+
+static struct sprd_adi_data ums512_data = {
+ .slave_offset = ADI_15BIT_SLAVE_OFFSET,
+ .slave_addr_size = ADI_15BIT_SLAVE_ADDR_SIZE,
+ .read_check = sprd_adi_read_check_r3,
+};
+
static const struct of_device_id sprd_adi_of_match[] = {
{
.compatible = "sprd,sc9860-adi",
+ .data = &sc9860_data,
+ },
+ {
+ .compatible = "sprd,sc9863-adi",
+ .data = &sc9863_data,
+ },
+ {
+ .compatible = "sprd,ums512-adi",
+ .data = &ums512_data,
},
{ },
};
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 05618a618939..9bd3fd1652f7 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -162,6 +162,8 @@
#define SPI_3WIRE_TX 3
#define SPI_3WIRE_RX 4
+#define STM32_SPI_AUTOSUSPEND_DELAY 1 /* 1 ms */
+
/*
* use PIO for small transfers, avoiding DMA setup/teardown overhead for drivers
* without fifo buffers.
@@ -568,29 +570,30 @@ static void stm32f4_spi_read_rx(struct stm32_spi *spi)
/**
* stm32h7_spi_read_rxfifo - Read bytes in Receive Data Register
* @spi: pointer to the spi controller data structure
- * @flush: boolean indicating that FIFO should be flushed
*
* Write in rx_buf depends on remaining bytes to avoid to write beyond
* rx_buf end.
*/
-static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi, bool flush)
+static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi)
{
u32 sr = readl_relaxed(spi->base + STM32H7_SPI_SR);
u32 rxplvl = FIELD_GET(STM32H7_SPI_SR_RXPLVL, sr);
while ((spi->rx_len > 0) &&
((sr & STM32H7_SPI_SR_RXP) ||
- (flush && ((sr & STM32H7_SPI_SR_RXWNE) || (rxplvl > 0))))) {
+ ((sr & STM32H7_SPI_SR_EOT) &&
+ ((sr & STM32H7_SPI_SR_RXWNE) || (rxplvl > 0))))) {
u32 offs = spi->cur_xferlen - spi->rx_len;
if ((spi->rx_len >= sizeof(u32)) ||
- (flush && (sr & STM32H7_SPI_SR_RXWNE))) {
+ (sr & STM32H7_SPI_SR_RXWNE)) {
u32 *rx_buf32 = (u32 *)(spi->rx_buf + offs);
*rx_buf32 = readl_relaxed(spi->base + STM32H7_SPI_RXDR);
spi->rx_len -= sizeof(u32);
} else if ((spi->rx_len >= sizeof(u16)) ||
- (flush && (rxplvl >= 2 || spi->cur_bpw > 8))) {
+ (!(sr & STM32H7_SPI_SR_RXWNE) &&
+ (rxplvl >= 2 || spi->cur_bpw > 8))) {
u16 *rx_buf16 = (u16 *)(spi->rx_buf + offs);
*rx_buf16 = readw_relaxed(spi->base + STM32H7_SPI_RXDR);
@@ -606,8 +609,8 @@ static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi, bool flush)
rxplvl = FIELD_GET(STM32H7_SPI_SR_RXPLVL, sr);
}
- dev_dbg(spi->dev, "%s%s: %d bytes left\n", __func__,
- flush ? "(flush)" : "", spi->rx_len);
+ dev_dbg(spi->dev, "%s: %d bytes left (sr=%08x)\n",
+ __func__, spi->rx_len, sr);
}
/**
@@ -674,18 +677,12 @@ static void stm32f4_spi_disable(struct stm32_spi *spi)
* stm32h7_spi_disable - Disable SPI controller
* @spi: pointer to the spi controller data structure
*
- * RX-Fifo is flushed when SPI controller is disabled. To prevent any data
- * loss, use stm32h7_spi_read_rxfifo(flush) to read the remaining bytes in
- * RX-Fifo.
- * Normally, if TSIZE has been configured, we should relax the hardware at the
- * reception of the EOT interrupt. But in case of error, EOT will not be
- * raised. So the subsystem unprepare_message call allows us to properly
- * complete the transfer from an hardware point of view.
+ * RX-Fifo is flushed when SPI controller is disabled.
*/
static void stm32h7_spi_disable(struct stm32_spi *spi)
{
unsigned long flags;
- u32 cr1, sr;
+ u32 cr1;
dev_dbg(spi->dev, "disable controller\n");
@@ -698,25 +695,6 @@ static void stm32h7_spi_disable(struct stm32_spi *spi)
return;
}
- /* Wait on EOT or suspend the flow */
- if (readl_relaxed_poll_timeout_atomic(spi->base + STM32H7_SPI_SR,
- sr, !(sr & STM32H7_SPI_SR_EOT),
- 10, 100000) < 0) {
- if (cr1 & STM32H7_SPI_CR1_CSTART) {
- writel_relaxed(cr1 | STM32H7_SPI_CR1_CSUSP,
- spi->base + STM32H7_SPI_CR1);
- if (readl_relaxed_poll_timeout_atomic(
- spi->base + STM32H7_SPI_SR,
- sr, !(sr & STM32H7_SPI_SR_SUSP),
- 10, 100000) < 0)
- dev_warn(spi->dev,
- "Suspend request timeout\n");
- }
- }
-
- if (!spi->cur_usedma && spi->rx_buf && (spi->rx_len > 0))
- stm32h7_spi_read_rxfifo(spi, true);
-
if (spi->cur_usedma && spi->dma_tx)
dmaengine_terminate_all(spi->dma_tx);
if (spi->cur_usedma && spi->dma_rx)
@@ -911,7 +889,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
if (__ratelimit(&rs))
dev_dbg_ratelimited(spi->dev, "Communication suspended\n");
if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
- stm32h7_spi_read_rxfifo(spi, false);
+ stm32h7_spi_read_rxfifo(spi);
/*
* If communication is suspended while using DMA, it means
* that something went wrong, so stop the current transfer
@@ -932,8 +910,10 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
if (sr & STM32H7_SPI_SR_EOT) {
if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
- stm32h7_spi_read_rxfifo(spi, true);
- end = true;
+ stm32h7_spi_read_rxfifo(spi);
+ if (!spi->cur_usedma ||
+ (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX))
+ end = true;
}
if (sr & STM32H7_SPI_SR_TXP)
@@ -942,7 +922,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
if (sr & STM32H7_SPI_SR_RXP)
if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
- stm32h7_spi_read_rxfifo(spi, false);
+ stm32h7_spi_read_rxfifo(spi);
writel_relaxed(sr & mask, spi->base + STM32H7_SPI_IFCR);
@@ -1041,42 +1021,17 @@ static void stm32f4_spi_dma_tx_cb(void *data)
}
/**
- * stm32f4_spi_dma_rx_cb - dma callback
+ * stm32_spi_dma_rx_cb - dma callback
* @data: pointer to the spi controller data structure
*
* DMA callback is called when the transfer is complete for DMA RX channel.
*/
-static void stm32f4_spi_dma_rx_cb(void *data)
+static void stm32_spi_dma_rx_cb(void *data)
{
struct stm32_spi *spi = data;
spi_finalize_current_transfer(spi->master);
- stm32f4_spi_disable(spi);
-}
-
-/**
- * stm32h7_spi_dma_cb - dma callback
- * @data: pointer to the spi controller data structure
- *
- * DMA callback is called when the transfer is complete or when an error
- * occurs. If the transfer is complete, EOT flag is raised.
- */
-static void stm32h7_spi_dma_cb(void *data)
-{
- struct stm32_spi *spi = data;
- unsigned long flags;
- u32 sr;
-
- spin_lock_irqsave(&spi->lock, flags);
-
- sr = readl_relaxed(spi->base + STM32H7_SPI_SR);
-
- spin_unlock_irqrestore(&spi->lock, flags);
-
- if (!(sr & STM32H7_SPI_SR_EOT))
- dev_warn(spi->dev, "DMA error (sr=0x%08x)\n", sr);
-
- /* Now wait for EOT, or SUSP or OVR in case of error */
+ spi->cfg->disable(spi);
}
/**
@@ -1242,11 +1197,13 @@ static void stm32f4_spi_transfer_one_dma_start(struct stm32_spi *spi)
*/
static void stm32h7_spi_transfer_one_dma_start(struct stm32_spi *spi)
{
- /* Enable the interrupts relative to the end of transfer */
- stm32_spi_set_bits(spi, STM32H7_SPI_IER, STM32H7_SPI_IER_EOTIE |
- STM32H7_SPI_IER_TXTFIE |
- STM32H7_SPI_IER_OVRIE |
- STM32H7_SPI_IER_MODFIE);
+ uint32_t ier = STM32H7_SPI_IER_OVRIE | STM32H7_SPI_IER_MODFIE;
+
+ /* Enable the interrupts */
+ if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX)
+ ier |= STM32H7_SPI_IER_EOTIE | STM32H7_SPI_IER_TXTFIE;
+
+ stm32_spi_set_bits(spi, STM32H7_SPI_IER, ier);
stm32_spi_enable(spi);
@@ -1645,10 +1602,6 @@ static int stm32_spi_transfer_one(struct spi_master *master,
struct stm32_spi *spi = spi_master_get_devdata(master);
int ret;
- /* Don't do anything on 0 bytes transfers */
- if (transfer->len == 0)
- return 0;
-
spi->tx_buf = transfer->tx_buf;
spi->rx_buf = transfer->rx_buf;
spi->tx_len = spi->tx_buf ? transfer->len : 0;
@@ -1762,7 +1715,7 @@ static const struct stm32_spi_cfg stm32f4_spi_cfg = {
.set_mode = stm32f4_spi_set_mode,
.transfer_one_dma_start = stm32f4_spi_transfer_one_dma_start,
.dma_tx_cb = stm32f4_spi_dma_tx_cb,
- .dma_rx_cb = stm32f4_spi_dma_rx_cb,
+ .dma_rx_cb = stm32_spi_dma_rx_cb,
.transfer_one_irq = stm32f4_spi_transfer_one_irq,
.irq_handler_event = stm32f4_spi_irq_event,
.irq_handler_thread = stm32f4_spi_irq_thread,
@@ -1782,8 +1735,11 @@ static const struct stm32_spi_cfg stm32h7_spi_cfg = {
.set_data_idleness = stm32h7_spi_data_idleness,
.set_number_of_data = stm32h7_spi_number_of_data,
.transfer_one_dma_start = stm32h7_spi_transfer_one_dma_start,
- .dma_rx_cb = stm32h7_spi_dma_cb,
- .dma_tx_cb = stm32h7_spi_dma_cb,
+ .dma_rx_cb = stm32_spi_dma_rx_cb,
+ /*
+ * dma_tx_cb is not necessary since in case of TX, dma is followed by
+ * SPI access hence handling is performed within the SPI interrupt
+ */
.transfer_one_irq = stm32h7_spi_transfer_one_irq,
.irq_handler_thread = stm32h7_spi_irq_thread,
.baud_rate_div_min = STM32H7_SPI_MBR_DIV_MIN,
@@ -1927,6 +1883,9 @@ static int stm32_spi_probe(struct platform_device *pdev)
if (spi->dma_tx || spi->dma_rx)
master->can_dma = stm32_spi_can_dma;
+ pm_runtime_set_autosuspend_delay(&pdev->dev,
+ STM32_SPI_AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
pm_runtime_enable(&pdev->dev);
@@ -1938,6 +1897,9 @@ static int stm32_spi_probe(struct platform_device *pdev)
goto err_pm_disable;
}
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
dev_info(&pdev->dev, "driver initialized\n");
return 0;
@@ -1946,6 +1908,7 @@ err_pm_disable:
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
err_dma_release:
if (spi->dma_tx)
dma_release_channel(spi->dma_tx);
@@ -1970,6 +1933,8 @@ static int stm32_spi_remove(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+
if (master->dma_tx)
dma_release_channel(master->dma_tx);
if (master->dma_rx)
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index 5131141bbf0d..e9de1d958bbd 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -717,12 +717,12 @@ static void tegra_spi_deinit_dma_param(struct tegra_spi_data *tspi,
dma_release_channel(dma_chan);
}
-static int tegra_spi_set_hw_cs_timing(struct spi_device *spi,
- struct spi_delay *setup,
- struct spi_delay *hold,
- struct spi_delay *inactive)
+static int tegra_spi_set_hw_cs_timing(struct spi_device *spi)
{
struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master);
+ struct spi_delay *setup = &spi->cs_setup;
+ struct spi_delay *hold = &spi->cs_hold;
+ struct spi_delay *inactive = &spi->cs_inactive;
u8 setup_dly, hold_dly, inactive_dly;
u32 setup_hold;
u32 spi_cs_timing;
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 6a726c95ac7a..ebd27f883033 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1061,33 +1061,12 @@ static int tegra_slink_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "Can not get clock %d\n", ret);
goto exit_free_master;
}
- ret = clk_prepare(tspi->clk);
- if (ret < 0) {
- dev_err(&pdev->dev, "Clock prepare failed %d\n", ret);
- goto exit_free_master;
- }
- ret = clk_enable(tspi->clk);
- if (ret < 0) {
- dev_err(&pdev->dev, "Clock enable failed %d\n", ret);
- goto exit_clk_unprepare;
- }
-
- spi_irq = platform_get_irq(pdev, 0);
- tspi->irq = spi_irq;
- ret = request_threaded_irq(tspi->irq, tegra_slink_isr,
- tegra_slink_isr_thread, IRQF_ONESHOT,
- dev_name(&pdev->dev), tspi);
- if (ret < 0) {
- dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n",
- tspi->irq);
- goto exit_clk_disable;
- }
tspi->rst = devm_reset_control_get_exclusive(&pdev->dev, "spi");
if (IS_ERR(tspi->rst)) {
dev_err(&pdev->dev, "can not get reset\n");
ret = PTR_ERR(tspi->rst);
- goto exit_free_irq;
+ goto exit_free_master;
}
tspi->max_buf_size = SLINK_FIFO_DEPTH << 2;
@@ -1095,7 +1074,7 @@ static int tegra_slink_probe(struct platform_device *pdev)
ret = tegra_slink_init_dma_param(tspi, true);
if (ret < 0)
- goto exit_free_irq;
+ goto exit_free_master;
ret = tegra_slink_init_dma_param(tspi, false);
if (ret < 0)
goto exit_rx_dma_free;
@@ -1106,16 +1085,9 @@ static int tegra_slink_probe(struct platform_device *pdev)
init_completion(&tspi->xfer_completion);
pm_runtime_enable(&pdev->dev);
- if (!pm_runtime_enabled(&pdev->dev)) {
- ret = tegra_slink_runtime_resume(&pdev->dev);
- if (ret)
- goto exit_pm_disable;
- }
-
- ret = pm_runtime_get_sync(&pdev->dev);
- if (ret < 0) {
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret) {
dev_err(&pdev->dev, "pm runtime get failed, e = %d\n", ret);
- pm_runtime_put_noidle(&pdev->dev);
goto exit_pm_disable;
}
@@ -1123,33 +1095,43 @@ static int tegra_slink_probe(struct platform_device *pdev)
udelay(2);
reset_control_deassert(tspi->rst);
+ spi_irq = platform_get_irq(pdev, 0);
+ tspi->irq = spi_irq;
+ ret = request_threaded_irq(tspi->irq, tegra_slink_isr,
+ tegra_slink_isr_thread, IRQF_ONESHOT,
+ dev_name(&pdev->dev), tspi);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n",
+ tspi->irq);
+ goto exit_pm_put;
+ }
+
tspi->def_command_reg = SLINK_M_S;
tspi->def_command2_reg = SLINK_CS_ACTIVE_BETWEEN;
tegra_slink_writel(tspi, tspi->def_command_reg, SLINK_COMMAND);
tegra_slink_writel(tspi, tspi->def_command2_reg, SLINK_COMMAND2);
- pm_runtime_put(&pdev->dev);
master->dev.of_node = pdev->dev.of_node;
- ret = devm_spi_register_master(&pdev->dev, master);
+ ret = spi_register_master(master);
if (ret < 0) {
dev_err(&pdev->dev, "can not register to master err %d\n", ret);
- goto exit_pm_disable;
+ goto exit_free_irq;
}
+
+ pm_runtime_put(&pdev->dev);
+
return ret;
+exit_free_irq:
+ free_irq(spi_irq, tspi);
+exit_pm_put:
+ pm_runtime_put(&pdev->dev);
exit_pm_disable:
pm_runtime_disable(&pdev->dev);
- if (!pm_runtime_status_suspended(&pdev->dev))
- tegra_slink_runtime_suspend(&pdev->dev);
+
tegra_slink_deinit_dma_param(tspi, false);
exit_rx_dma_free:
tegra_slink_deinit_dma_param(tspi, true);
-exit_free_irq:
- free_irq(spi_irq, tspi);
-exit_clk_disable:
- clk_disable(tspi->clk);
-exit_clk_unprepare:
- clk_unprepare(tspi->clk);
exit_free_master:
spi_master_put(master);
return ret;
@@ -1160,10 +1142,11 @@ static int tegra_slink_remove(struct platform_device *pdev)
struct spi_master *master = platform_get_drvdata(pdev);
struct tegra_slink_data *tspi = spi_master_get_devdata(master);
+ spi_unregister_master(master);
+
free_irq(tspi->irq, tspi);
- clk_disable(tspi->clk);
- clk_unprepare(tspi->clk);
+ pm_runtime_disable(&pdev->dev);
if (tspi->tx_dma_chan)
tegra_slink_deinit_dma_param(tspi, false);
@@ -1171,10 +1154,6 @@ static int tegra_slink_remove(struct platform_device *pdev)
if (tspi->rx_dma_chan)
tegra_slink_deinit_dma_param(tspi, true);
- pm_runtime_disable(&pdev->dev);
- if (!pm_runtime_status_suspended(&pdev->dev))
- tegra_slink_runtime_suspend(&pdev->dev);
-
return 0;
}
diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
index 9262c6418463..cfa222c9bd5e 100644
--- a/drivers/spi/spi-zynq-qspi.c
+++ b/drivers/spi/spi-zynq-qspi.c
@@ -545,7 +545,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
ZYNQ_QSPI_IXR_RXTX_MASK);
- if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+ if (!wait_for_completion_timeout(&xqspi->data_completion,
msecs_to_jiffies(1000)))
err = -ETIMEDOUT;
}
@@ -563,7 +563,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
ZYNQ_QSPI_IXR_RXTX_MASK);
- if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+ if (!wait_for_completion_timeout(&xqspi->data_completion,
msecs_to_jiffies(1000)))
err = -ETIMEDOUT;
}
@@ -579,7 +579,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
ZYNQ_QSPI_IXR_RXTX_MASK);
- if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+ if (!wait_for_completion_timeout(&xqspi->data_completion,
msecs_to_jiffies(1000)))
err = -ETIMEDOUT;
@@ -603,7 +603,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
ZYNQ_QSPI_IXR_RXTX_MASK);
- if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+ if (!wait_for_completion_timeout(&xqspi->data_completion,
msecs_to_jiffies(1000)))
err = -ETIMEDOUT;
}
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index e4dc593b1f32..65d14af9c015 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -846,9 +846,9 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) ||
!spi->controller->set_cs_timing) {
if (activate)
- spi_delay_exec(&spi->controller->cs_setup, NULL);
+ spi_delay_exec(&spi->cs_setup, NULL);
else
- spi_delay_exec(&spi->controller->cs_hold, NULL);
+ spi_delay_exec(&spi->cs_hold, NULL);
}
if (spi->mode & SPI_CS_HIGH)
@@ -891,7 +891,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) ||
!spi->controller->set_cs_timing) {
if (!activate)
- spi_delay_exec(&spi->controller->cs_inactive, NULL);
+ spi_delay_exec(&spi->cs_inactive, NULL);
}
}
diff --git a/include/linux/platform_data/spi-mt65xx.h b/include/linux/platform_data/spi-mt65xx.h
index 65fd5ffd257c..f0db674f07b8 100644
--- a/include/linux/platform_data/spi-mt65xx.h
+++ b/include/linux/platform_data/spi-mt65xx.h
@@ -12,5 +12,6 @@
/* Board specific platform_data */
struct mtk_chip_config {
u32 sample_sel;
+ u32 tick_delay;
};
#endif
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 97b8d12b5f2b..8371bca13729 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -147,7 +147,11 @@ extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer);
* not using a GPIO line)
* @word_delay: delay to be inserted between consecutive
* words of a transfer
- *
+ * @cs_setup: delay to be introduced by the controller after CS is asserted
+ * @cs_hold: delay to be introduced by the controller before CS is deasserted
+ * @cs_inactive: delay to be introduced by the controller after CS is
+ * deasserted. If @cs_change_delay is used from @spi_transfer, then the
+ * two delays will be added up.
* @statistics: statistics for the spi_device
*
* A @spi_device is used to interchange data between an SPI slave
@@ -188,6 +192,10 @@ struct spi_device {
int cs_gpio; /* LEGACY: chip select gpio */
struct gpio_desc *cs_gpiod; /* chip select gpio desc */
struct spi_delay word_delay; /* inter-word delay */
+ /* CS delays */
+ struct spi_delay cs_setup;
+ struct spi_delay cs_hold;
+ struct spi_delay cs_inactive;
/* the statistics */
struct spi_statistics statistics;
@@ -339,6 +347,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
* @max_speed_hz: Highest supported transfer speed
* @flags: other constraints relevant to this driver
* @slave: indicates that this is an SPI slave controller
+ * @devm_allocated: whether the allocation of this struct is devres-managed
* @max_transfer_size: function that returns the max transfer size for
* a &spi_device; may be %NULL, so the default %SIZE_MAX will be used.
* @max_message_size: function that returns the max message size for
@@ -412,11 +421,6 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
* controller has native support for memory like operations.
* @unprepare_message: undo any work done by prepare_message().
* @slave_abort: abort the ongoing transfer request on an SPI slave controller
- * @cs_setup: delay to be introduced by the controller after CS is asserted
- * @cs_hold: delay to be introduced by the controller before CS is deasserted
- * @cs_inactive: delay to be introduced by the controller after CS is
- * deasserted. If @cs_change_delay is used from @spi_transfer, then the
- * two delays will be added up.
* @cs_gpios: LEGACY: array of GPIO descs to use as chip select lines; one per
* CS number. Any individual value may be -ENOENT for CS lines that
* are not GPIOs (driven by the SPI controller itself). Use the cs_gpiods
@@ -511,7 +515,7 @@ struct spi_controller {
#define SPI_MASTER_GPIO_SS BIT(5) /* GPIO CS must select slave */
- /* flag indicating this is a non-devres managed controller */
+ /* flag indicating if the allocation of this struct is devres-managed */
bool devm_allocated;
/* flag indicating this is an SPI slave controller */
@@ -550,8 +554,7 @@ struct spi_controller {
* to configure specific CS timing through spi_set_cs_timing() after
* spi_setup().
*/
- int (*set_cs_timing)(struct spi_device *spi, struct spi_delay *setup,
- struct spi_delay *hold, struct spi_delay *inactive);
+ int (*set_cs_timing)(struct spi_device *spi);
/* bidirectional bulk transfers
*
@@ -638,11 +641,6 @@ struct spi_controller {
/* Optimized handlers for SPI memory-like operations. */
const struct spi_controller_mem_ops *mem_ops;
- /* CS delays */
- struct spi_delay cs_setup;
- struct spi_delay cs_hold;
- struct spi_delay cs_inactive;
-
/* gpio chip select */
int *cs_gpios;
struct gpio_desc **cs_gpiods;