diff options
-rw-r--r-- | drivers/gpu/drm/bridge/analogix/anx7625.c | 335 | ||||
-rw-r--r-- | drivers/gpu/drm/bridge/analogix/anx7625.h | 79 |
2 files changed, 404 insertions, 10 deletions
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index 6d5ae52f4142..001460f62b0c 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -26,6 +26,7 @@ #include <drm/drm_crtc_helper.h> #include <drm/drm_dp_helper.h> #include <drm/drm_edid.h> +#include <drm/drm_hdcp.h> #include <drm/drm_mipi_dsi.h> #include <drm/drm_of.h> #include <drm/drm_panel.h> @@ -213,6 +214,65 @@ static int wait_aux_op_finish(struct anx7625_data *ctx) return 0; } +static int anx7625_aux_dpcd_read(struct anx7625_data *ctx, + u32 address, u8 len, u8 *buf) +{ + struct device *dev = &ctx->client->dev; + int ret; + u8 addrh, addrm, addrl; + u8 cmd; + + if (len > MAX_DPCD_BUFFER_SIZE) { + dev_err(dev, "exceed aux buffer len.\n"); + return -EINVAL; + } + + addrl = address & 0xFF; + addrm = (address >> 8) & 0xFF; + addrh = (address >> 16) & 0xFF; + + cmd = DPCD_CMD(len, DPCD_READ); + cmd = ((len - 1) << 4) | 0x09; + + /* Set command and length */ + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + AP_AUX_COMMAND, cmd); + + /* Set aux access address */ + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + AP_AUX_ADDR_7_0, addrl); + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + AP_AUX_ADDR_15_8, addrm); + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + AP_AUX_ADDR_19_16, addrh); + + /* Enable aux access */ + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client, + AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN); + + if (ret < 0) { + dev_err(dev, "cannot access aux related register.\n"); + return -EIO; + } + + usleep_range(2000, 2100); + + ret = wait_aux_op_finish(ctx); + if (ret) { + dev_err(dev, "aux IO error: wait aux op finish.\n"); + return ret; + } + + ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client, + AP_AUX_BUFF_START, len, buf); + if (ret < 0) { + dev_err(dev, "read dpcd register failed\n"); + return -EIO; + } + + return 0; +} + static int anx7625_video_mute_control(struct anx7625_data *ctx, u8 status) { @@ -669,6 +729,165 @@ static int anx7625_dpi_config(struct anx7625_data *ctx) return ret; } +static int anx7625_read_flash_status(struct anx7625_data *ctx) +{ + return anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, R_RAM_CTRL); +} + +static int anx7625_hdcp_key_probe(struct anx7625_data *ctx) +{ + int ret, val; + struct device *dev = &ctx->client->dev; + u8 ident[FLASH_BUF_LEN]; + + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + FLASH_ADDR_HIGH, 0x91); + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + FLASH_ADDR_LOW, 0xA0); + if (ret < 0) { + dev_err(dev, "IO error : set key flash address.\n"); + return ret; + } + + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + FLASH_LEN_HIGH, (FLASH_BUF_LEN - 1) >> 8); + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + FLASH_LEN_LOW, (FLASH_BUF_LEN - 1) & 0xFF); + if (ret < 0) { + dev_err(dev, "IO error : set key flash len.\n"); + return ret; + } + + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + R_FLASH_RW_CTRL, FLASH_READ); + ret |= readx_poll_timeout(anx7625_read_flash_status, + ctx, val, + ((val & FLASH_DONE) || (val < 0)), + 2000, + 2000 * 150); + if (ret) { + dev_err(dev, "flash read access fail!\n"); + return -EIO; + } + + ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client, + FLASH_BUF_BASE_ADDR, + FLASH_BUF_LEN, ident); + if (ret < 0) { + dev_err(dev, "read flash data fail!\n"); + return -EIO; + } + + if (ident[29] == 0xFF && ident[30] == 0xFF && ident[31] == 0xFF) + return -EINVAL; + + return 0; +} + +static int anx7625_hdcp_key_load(struct anx7625_data *ctx) +{ + int ret; + struct device *dev = &ctx->client->dev; + + /* Select HDCP 1.4 KEY */ + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + R_BOOT_RETRY, 0x12); + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + FLASH_ADDR_HIGH, HDCP14KEY_START_ADDR >> 8); + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + FLASH_ADDR_LOW, HDCP14KEY_START_ADDR & 0xFF); + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + R_RAM_LEN_H, HDCP14KEY_SIZE >> 12); + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + R_RAM_LEN_L, HDCP14KEY_SIZE >> 4); + + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + R_RAM_ADDR_H, 0); + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + R_RAM_ADDR_L, 0); + /* Enable HDCP 1.4 KEY load */ + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, + R_RAM_CTRL, DECRYPT_EN | LOAD_START); + dev_dbg(dev, "load HDCP 1.4 key done\n"); + return ret; +} + +static int anx7625_hdcp_disable(struct anx7625_data *ctx) +{ + int ret; + struct device *dev = &ctx->client->dev; + + dev_dbg(dev, "disable HDCP 1.4\n"); + + /* Disable HDCP */ + ret = anx7625_write_and(ctx, ctx->i2c.rx_p1_client, 0xee, 0x9f); + /* Try auth flag */ + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10); + /* Interrupt for DRM */ + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01); + if (ret < 0) + dev_err(dev, "fail to disable HDCP\n"); + + return anx7625_write_and(ctx, ctx->i2c.tx_p0_client, + TX_HDCP_CTRL0, ~HARD_AUTH_EN & 0xFF); +} + +static int anx7625_hdcp_enable(struct anx7625_data *ctx) +{ + u8 bcap; + int ret; + struct device *dev = &ctx->client->dev; + + ret = anx7625_hdcp_key_probe(ctx); + if (ret) { + dev_dbg(dev, "no key found, not to do hdcp\n"); + return ret; + } + + /* Read downstream capability */ + anx7625_aux_dpcd_read(ctx, 0x68028, 1, &bcap); + if (!(bcap & 0x01)) { + pr_warn("downstream not support HDCP 1.4, cap(%x).\n", bcap); + return 0; + } + + dev_dbg(dev, "enable HDCP 1.4\n"); + + /* First clear HDCP state */ + ret = anx7625_reg_write(ctx, ctx->i2c.tx_p0_client, + TX_HDCP_CTRL0, + KSVLIST_VLD | BKSV_SRM_PASS | RE_AUTHEN); + usleep_range(1000, 1100); + /* Second clear HDCP state */ + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p0_client, + TX_HDCP_CTRL0, + KSVLIST_VLD | BKSV_SRM_PASS | RE_AUTHEN); + + /* Set time for waiting KSVR */ + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p0_client, + SP_TX_WAIT_KSVR_TIME, 0xc8); + /* Set time for waiting R0 */ + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p0_client, + SP_TX_WAIT_R0_TIME, 0xb0); + ret |= anx7625_hdcp_key_load(ctx); + if (ret) { + pr_warn("prepare HDCP key failed.\n"); + return ret; + } + + ret = anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xee, 0x20); + + /* Try auth flag */ + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10); + /* Interrupt for DRM */ + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01); + if (ret < 0) + dev_err(dev, "fail to enable HDCP\n"); + + return anx7625_write_or(ctx, ctx->i2c.tx_p0_client, + TX_HDCP_CTRL0, HARD_AUTH_EN); +} + static void anx7625_dp_start(struct anx7625_data *ctx) { int ret; @@ -679,6 +898,9 @@ static void anx7625_dp_start(struct anx7625_data *ctx) return; } + /* Disable HDCP */ + anx7625_write_and(ctx, ctx->i2c.rx_p1_client, 0xee, 0x9f); + if (ctx->pdata.is_dpi) ret = anx7625_dpi_config(ctx); else @@ -686,6 +908,10 @@ static void anx7625_dp_start(struct anx7625_data *ctx) if (ret < 0) DRM_DEV_ERROR(dev, "MIPI phy setup error.\n"); + + ctx->hdcp_cp = DRM_MODE_CONTENT_PROTECTION_UNDESIRED; + + ctx->dp_en = 1; } static void anx7625_dp_stop(struct anx7625_data *ctx) @@ -705,6 +931,10 @@ static void anx7625_dp_stop(struct anx7625_data *ctx) ret |= anx7625_video_mute_control(ctx, 1); if (ret < 0) DRM_DEV_ERROR(dev, "IO error : mute video fail\n"); + + ctx->hdcp_cp = DRM_MODE_CONTENT_PROTECTION_UNDESIRED; + + ctx->dp_en = 0; } static int sp_tx_rst_aux(struct anx7625_data *ctx) @@ -1697,6 +1927,83 @@ static int anx7625_attach_dsi(struct anx7625_data *ctx) return 0; } +static void hdcp_check_work_func(struct work_struct *work) +{ + u8 status; + struct delayed_work *dwork; + struct anx7625_data *ctx; + struct device *dev; + struct drm_device *drm_dev; + + dwork = to_delayed_work(work); + ctx = container_of(dwork, struct anx7625_data, hdcp_work); + dev = &ctx->client->dev; + + if (!ctx->connector) { + dev_err(dev, "HDCP connector is null!"); + return; + } + + drm_dev = ctx->connector->dev; + drm_modeset_lock(&drm_dev->mode_config.connection_mutex, NULL); + mutex_lock(&ctx->hdcp_wq_lock); + + status = anx7625_reg_read(ctx, ctx->i2c.tx_p0_client, 0); + dev_dbg(dev, "sink HDCP status check: %.02x\n", status); + if (status & BIT(1)) { + ctx->hdcp_cp = DRM_MODE_CONTENT_PROTECTION_ENABLED; + drm_hdcp_update_content_protection(ctx->connector, + ctx->hdcp_cp); + dev_dbg(dev, "update CP to ENABLE\n"); + } + + mutex_unlock(&ctx->hdcp_wq_lock); + drm_modeset_unlock(&drm_dev->mode_config.connection_mutex); +} + +static int anx7625_connector_atomic_check(struct anx7625_data *ctx, + struct drm_connector_state *state) +{ + struct device *dev = &ctx->client->dev; + int cp; + + dev_dbg(dev, "hdcp state check\n"); + cp = state->content_protection; + + if (cp == ctx->hdcp_cp) + return 0; + + if (cp == DRM_MODE_CONTENT_PROTECTION_DESIRED) { + if (ctx->dp_en) { + dev_dbg(dev, "enable HDCP\n"); + anx7625_hdcp_enable(ctx); + + queue_delayed_work(ctx->hdcp_workqueue, + &ctx->hdcp_work, + msecs_to_jiffies(2000)); + } + } + + if (cp == DRM_MODE_CONTENT_PROTECTION_UNDESIRED) { + if (ctx->hdcp_cp != DRM_MODE_CONTENT_PROTECTION_ENABLED) { + dev_err(dev, "current CP is not ENABLED\n"); + return -EINVAL; + } + anx7625_hdcp_disable(ctx); + ctx->hdcp_cp = DRM_MODE_CONTENT_PROTECTION_UNDESIRED; + drm_hdcp_update_content_protection(ctx->connector, + ctx->hdcp_cp); + dev_dbg(dev, "update CP to UNDESIRE\n"); + } + + if (cp == DRM_MODE_CONTENT_PROTECTION_ENABLED) { + dev_err(dev, "Userspace illegal set to PROTECTION ENABLE\n"); + return -EINVAL; + } + + return 0; +} + static int anx7625_bridge_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags) { @@ -1920,8 +2227,11 @@ static int anx7625_bridge_atomic_check(struct drm_bridge *bridge, struct device *dev = &ctx->client->dev; dev_dbg(dev, "drm bridge atomic check\n"); - return anx7625_bridge_mode_fixup(bridge, &crtc_state->mode, - &crtc_state->adjusted_mode); + + anx7625_bridge_mode_fixup(bridge, &crtc_state->mode, + &crtc_state->adjusted_mode); + + return anx7625_connector_atomic_check(ctx, conn_state); } static void anx7625_bridge_atomic_enable(struct drm_bridge *bridge, @@ -2189,6 +2499,15 @@ static int anx7625_i2c_probe(struct i2c_client *client, anx7625_init_gpio(platform); mutex_init(&platform->lock); + mutex_init(&platform->hdcp_wq_lock); + + INIT_DELAYED_WORK(&platform->hdcp_work, hdcp_check_work_func); + platform->hdcp_workqueue = create_workqueue("hdcp workqueue"); + if (!platform->hdcp_workqueue) { + dev_err(dev, "fail to create work queue\n"); + ret = -ENOMEM; + goto free_platform; + } platform->pdata.intp_irq = client->irq; if (platform->pdata.intp_irq) { @@ -2198,7 +2517,7 @@ static int anx7625_i2c_probe(struct i2c_client *client, if (!platform->workqueue) { DRM_DEV_ERROR(dev, "fail to create work queue\n"); ret = -ENOMEM; - goto free_platform; + goto free_hdcp_wq; } ret = devm_request_threaded_irq(dev, platform->pdata.intp_irq, @@ -2268,6 +2587,10 @@ free_wq: if (platform->workqueue) destroy_workqueue(platform->workqueue); +free_hdcp_wq: + if (platform->hdcp_workqueue) + destroy_workqueue(platform->hdcp_workqueue); + free_platform: kfree(platform); @@ -2283,6 +2606,12 @@ static int anx7625_i2c_remove(struct i2c_client *client) if (platform->pdata.intp_irq) destroy_workqueue(platform->workqueue); + if (platform->hdcp_workqueue) { + cancel_delayed_work(&platform->hdcp_work); + flush_workqueue(platform->workqueue); + destroy_workqueue(platform->workqueue); + } + if (!platform->pdata.low_power_mode) pm_runtime_put_sync_suspend(&client->dev); diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h index 6f9d5f0e377c..56165f5b254c 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.h +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h @@ -59,10 +59,23 @@ /***************************************************************/ /* Register definition of device address 0x70 */ -#define I2C_ADDR_70_DPTX 0x70 - -#define SP_TX_LINK_BW_SET_REG 0xA0 -#define SP_TX_LANE_COUNT_SET_REG 0xA1 +#define TX_HDCP_CTRL0 0x01 +#define STORE_AN BIT(7) +#define RX_REPEATER BIT(6) +#define RE_AUTHEN BIT(5) +#define SW_AUTH_OK BIT(4) +#define HARD_AUTH_EN BIT(3) +#define ENC_EN BIT(2) +#define BKSV_SRM_PASS BIT(1) +#define KSVLIST_VLD BIT(0) + +#define SP_TX_WAIT_R0_TIME 0x40 +#define SP_TX_WAIT_KSVR_TIME 0x42 +#define SP_TX_SYS_CTRL1_REG 0x80 +#define HDCP2TX_FW_EN BIT(4) + +#define SP_TX_LINK_BW_SET_REG 0xA0 +#define SP_TX_LANE_COUNT_SET_REG 0xA1 #define M_VID_0 0xC0 #define M_VID_1 0xC1 @@ -71,6 +84,12 @@ #define N_VID_1 0xC4 #define N_VID_2 0xC5 +#define KEY_START_ADDR 0x9000 +#define KEY_RESERVED 416 + +#define HDCP14KEY_START_ADDR (KEY_START_ADDR + KEY_RESERVED) +#define HDCP14KEY_SIZE 624 + /***************************************************************/ /* Register definition of device address 0x72 */ #define AUX_RST 0x04 @@ -155,9 +174,43 @@ #define I2C_ADDR_7E_FLASH_CONTROLLER 0x7E +#define R_BOOT_RETRY 0x00 +#define R_RAM_ADDR_H 0x01 +#define R_RAM_ADDR_L 0x02 +#define R_RAM_LEN_H 0x03 +#define R_RAM_LEN_L 0x04 #define FLASH_LOAD_STA 0x05 #define FLASH_LOAD_STA_CHK BIT(7) +#define R_RAM_CTRL 0x05 +/* bit positions */ +#define FLASH_DONE BIT(7) +#define BOOT_LOAD_DONE BIT(6) +#define CRC_OK BIT(5) +#define LOAD_DONE BIT(4) +#define O_RW_DONE BIT(3) +#define FUSE_BUSY BIT(2) +#define DECRYPT_EN BIT(1) +#define LOAD_START BIT(0) + +#define FLASH_ADDR_HIGH 0x0F +#define FLASH_ADDR_LOW 0x10 +#define FLASH_LEN_HIGH 0x31 +#define FLASH_LEN_LOW 0x32 +#define R_FLASH_RW_CTRL 0x33 +/* bit positions */ +#define READ_DELAY_SELECT BIT(7) +#define GENERAL_INSTRUCTION_EN BIT(6) +#define FLASH_ERASE_EN BIT(5) +#define RDID_READ_EN BIT(4) +#define REMS_READ_EN BIT(3) +#define WRITE_STATUS_EN BIT(2) +#define FLASH_READ BIT(1) +#define FLASH_WRITE BIT(0) + +#define FLASH_BUF_BASE_ADDR 0x60 +#define FLASH_BUF_LEN 0x20 + #define XTAL_FRQ_SEL 0x3F /* bit field positions */ #define XTAL_FRQ_SEL_POS 5 @@ -184,10 +237,15 @@ #define AP_AUX_CTRL_ADDRONLY 0x20 #define AP_AUX_BUFF_START 0x15 -#define PIXEL_CLOCK_L 0x25 -#define PIXEL_CLOCK_H 0x26 +#define PIXEL_CLOCK_L 0x25 +#define PIXEL_CLOCK_H 0x26 + +#define AP_AUX_COMMAND 0x27 /* com+len */ +#define LENGTH_SHIFT 4 +#define DPCD_READ 0x09 +#define DPCD_WRITE 0x08 +#define DPCD_CMD(len, cmd) ((((len) - 1) << LENGTH_SHIFT) | (cmd)) -#define AP_AUX_COMMAND 0x27 /* com+len */ /* Bit 0&1: 3D video structure */ /* 0x01: frame packing, 0x02:Line alternative, 0x03:Side-by-side(full) */ #define AP_AV_STATUS 0x28 @@ -392,16 +450,23 @@ struct anx7625_data { struct platform_device *audio_pdev; int hpd_status; int hpd_high_cnt; + int dp_en; + int hdcp_cp; /* Lock for work queue */ struct mutex lock; struct i2c_client *client; struct anx7625_i2c_client i2c; struct i2c_client *last_client; + struct timer_list hdcp_timer; struct s_edid_data slimport_edid_p; struct device *codec_dev; hdmi_codec_plugged_cb plugged_cb; struct work_struct work; struct workqueue_struct *workqueue; + struct delayed_work hdcp_work; + struct workqueue_struct *hdcp_workqueue; + /* Lock for hdcp work queue */ + struct mutex hdcp_wq_lock; char edid_block; struct display_timing dt; u8 display_timing_valid; |