diff options
-rw-r--r-- | Documentation/devicetree/bindings/mfd/aspeed-lpc.txt | 100 | ||||
-rw-r--r-- | arch/arm/boot/dts/aspeed-g4.dtsi | 76 | ||||
-rw-r--r-- | arch/arm/boot/dts/aspeed-g5.dtsi | 137 | ||||
-rw-r--r-- | arch/arm/boot/dts/aspeed-g6.dtsi | 137 | ||||
-rw-r--r-- | drivers/char/ipmi/kcs_bmc_aspeed.c | 27 | ||||
-rw-r--r-- | drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 17 | ||||
-rw-r--r-- | drivers/soc/aspeed/aspeed-lpc-ctrl.c | 20 | ||||
-rw-r--r-- | drivers/soc/aspeed/aspeed-lpc-snoop.c | 23 |
8 files changed, 232 insertions, 305 deletions
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt index d0a38ba8b9ce..936aa108eab4 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt @@ -9,13 +9,7 @@ primary use case of the Aspeed LPC controller is as a slave on the bus conditions it can also take the role of bus master. The LPC controller is represented as a multi-function device to account for the -mix of functionality it provides. The principle split is between the register -layout at the start of the I/O space which is, to quote the Aspeed datasheet, -"basically compatible with the [LPC registers from the] popular BMC controller -H8S/2168[1]", and everything else, where everything else is an eclectic -collection of functions with a esoteric register layout. "Everything else", -here labeled the "host" portion of the controller, includes, but is not limited -to: +mix of functionality, which includes, but is not limited to: * An IPMI Block Transfer[2] Controller @@ -44,80 +38,36 @@ Required properties =================== - compatible: One of: - "aspeed,ast2400-lpc", "simple-mfd" - "aspeed,ast2500-lpc", "simple-mfd" - "aspeed,ast2600-lpc", "simple-mfd" + "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon" + "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon" + "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon" - reg: contains the physical address and length values of the Aspeed LPC memory region. - #address-cells: <1> - #size-cells: <1> -- ranges: Maps 0 to the physical address and length of the LPC memory - region - -Required LPC Child nodes -======================== - -BMC Node --------- - -- compatible: One of: - "aspeed,ast2400-lpc-bmc" - "aspeed,ast2500-lpc-bmc" - "aspeed,ast2600-lpc-bmc" - -- reg: contains the physical address and length values of the - H8S/2168-compatible LPC controller memory region - -Host Node ---------- - -- compatible: One of: - "aspeed,ast2400-lpc-host", "simple-mfd", "syscon" - "aspeed,ast2500-lpc-host", "simple-mfd", "syscon" - "aspeed,ast2600-lpc-host", "simple-mfd", "syscon" - -- reg: contains the address and length values of the host-related - register space for the Aspeed LPC controller - -- #address-cells: <1> -- #size-cells: <1> -- ranges: Maps 0 to the address and length of the host-related LPC memory +- ranges: Maps 0 to the physical address and length of the LPC memory region Example: lpc: lpc@1e789000 { - compatible = "aspeed,ast2500-lpc", "simple-mfd"; + compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon"; reg = <0x1e789000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x1e789000 0x1000>; - lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2500-lpc-bmc"; + lpc_snoop: lpc-snoop@0 { + compatible = "aspeed,ast2600-lpc-snoop"; reg = <0x0 0x80>; - }; - - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80 0x1e0>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + snoop-ports = <0x80>; }; }; -BMC Node Children -================== - - -Host Node Children -================== LPC Host Interface Controller ------------------- @@ -149,14 +99,12 @@ Optional properties: Example: -lpc-host@80 { - lpc_ctrl: lpc-ctrl@0 { - compatible = "aspeed,ast2500-lpc-ctrl"; - reg = <0x0 0x80>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - memory-region = <&flash_memory>; - flash = <&spi>; - }; +lpc_ctrl: lpc-ctrl@80 { + compatible = "aspeed,ast2500-lpc-ctrl"; + reg = <0x80 0x80>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + memory-region = <&flash_memory>; + flash = <&spi>; }; LPC Host Controller @@ -179,9 +127,9 @@ Required properties: Example: -lhc: lhc@20 { +lhc: lhc@a0 { compatible = "aspeed,ast2500-lhc"; - reg = <0x20 0x24 0x48 0x8>; + reg = <0xa0 0x24 0xc8 0x8>; }; LPC reset control @@ -192,16 +140,18 @@ state of the LPC bus. Some systems may chose to modify this configuration. Required properties: - - compatible: "aspeed,ast2600-lpc-reset" or - "aspeed,ast2500-lpc-reset" - "aspeed,ast2400-lpc-reset" + - compatible: One of: + "aspeed,ast2600-lpc-reset"; + "aspeed,ast2500-lpc-reset"; + "aspeed,ast2400-lpc-reset"; + - reg: offset and length of the IP in the LHC memory region - #reset-controller indicates the number of reset cells expected Example: -lpc_reset: reset-controller@18 { +lpc_reset: reset-controller@98 { compatible = "aspeed,ast2500-lpc-reset"; - reg = <0x18 0x4>; + reg = <0x98 0x4>; #reset-cells = <1>; }; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index e7a45ba18fc9..c5aeb3cf3a09 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -343,59 +343,45 @@ }; lpc: lpc@1e789000 { - compatible = "aspeed,ast2400-lpc", "simple-mfd"; + compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon"; reg = <0x1e789000 0x1000>; + reg-io-width = <4>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x1e789000 0x1000>; - lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2400-lpc-bmc"; - reg = <0x0 0x80>; + lpc_ctrl: lpc-ctrl@80 { + compatible = "aspeed,ast2400-lpc-ctrl"; + reg = <0x80 0x10>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; }; - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2400-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80 0x1e0>; - - lpc_ctrl: lpc-ctrl@0 { - compatible = "aspeed,ast2400-lpc-ctrl"; - reg = <0x0 0x10>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - status = "disabled"; - }; - - lpc_snoop: lpc-snoop@10 { - compatible = "aspeed,ast2400-lpc-snoop"; - reg = <0x10 0x8>; - interrupts = <8>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - status = "disabled"; - }; - - lhc: lhc@20 { - compatible = "aspeed,ast2400-lhc"; - reg = <0x20 0x24 0x48 0x8>; - }; - - lpc_reset: reset-controller@18 { - compatible = "aspeed,ast2400-lpc-reset"; - reg = <0x18 0x4>; - #reset-cells = <1>; - }; - - ibt: ibt@c0 { - compatible = "aspeed,ast2400-ibt-bmc"; - reg = <0xc0 0x18>; - interrupts = <8>; - status = "disabled"; - }; + lpc_snoop: lpc-snoop@90 { + compatible = "aspeed,ast2400-lpc-snoop"; + reg = <0x90 0x8>; + interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; + }; + + lhc: lhc@a0 { + compatible = "aspeed,ast2400-lhc"; + reg = <0xa0 0x24 0xc8 0x8>; + }; + + lpc_reset: reset-controller@98 { + compatible = "aspeed,ast2400-lpc-reset"; + reg = <0x98 0x4>; + #reset-cells = <1>; + }; + + ibt: ibt@140 { + compatible = "aspeed,ast2400-ibt-bmc"; + reg = <0x140 0x18>; + interrupts = <8>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 21930521a986..d733c1f161c1 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -434,91 +434,74 @@ }; lpc: lpc@1e789000 { - compatible = "aspeed,ast2500-lpc", "simple-mfd"; + compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon"; reg = <0x1e789000 0x1000>; + reg-io-width = <4>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x1e789000 0x1000>; - lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon"; - reg = <0x0 0x80>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x80>; - - kcs1: kcs@24 { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; - interrupts = <8>; - status = "disabled"; - }; - kcs2: kcs@28 { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; - interrupts = <8>; - status = "disabled"; - }; - kcs3: kcs@2c { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; - interrupts = <8>; - status = "disabled"; - }; + kcs1: kcs@24 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; + interrupts = <8>; + status = "disabled"; + }; + + kcs2: kcs@28 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; + interrupts = <8>; + status = "disabled"; + }; + + kcs3: kcs@2c { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; + interrupts = <8>; + status = "disabled"; + }; + + kcs4: kcs@114 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>; + interrupts = <8>; + status = "disabled"; }; - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80 0x1e0>; - - kcs4: kcs@94 { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>; - interrupts = <8>; - status = "disabled"; - }; - - lpc_ctrl: lpc-ctrl@0 { - compatible = "aspeed,ast2500-lpc-ctrl"; - reg = <0x0 0x10>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - status = "disabled"; - }; - - lpc_snoop: lpc-snoop@10 { - compatible = "aspeed,ast2500-lpc-snoop"; - reg = <0x10 0x8>; - interrupts = <8>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - status = "disabled"; - }; - - lpc_reset: reset-controller@18 { - compatible = "aspeed,ast2500-lpc-reset"; - reg = <0x18 0x4>; - #reset-cells = <1>; - }; - - lhc: lhc@20 { - compatible = "aspeed,ast2500-lhc"; - reg = <0x20 0x24 0x48 0x8>; - }; - - - ibt: ibt@c0 { - compatible = "aspeed,ast2500-ibt-bmc"; - reg = <0xc0 0x18>; - interrupts = <8>; - status = "disabled"; - }; + lpc_ctrl: lpc-ctrl@80 { + compatible = "aspeed,ast2500-lpc-ctrl"; + reg = <0x80 0x10>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; + }; + + lpc_snoop: lpc-snoop@90 { + compatible = "aspeed,ast2500-lpc-snoop"; + reg = <0x90 0x8>; + interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; + }; + + lpc_reset: reset-controller@98 { + compatible = "aspeed,ast2500-lpc-reset"; + reg = <0x98 0x4>; + #reset-cells = <1>; + }; + + lhc: lhc@a0 { + compatible = "aspeed,ast2500-lhc"; + reg = <0xa0 0x24 0xc8 0x8>; + }; + + + ibt: ibt@140 { + compatible = "aspeed,ast2500-ibt-bmc"; + reg = <0x140 0x18>; + interrupts = <8>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 3ee470c2b7b5..f96607b7b4e2 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -460,91 +460,74 @@ }; lpc: lpc@1e789000 { - compatible = "aspeed,ast2600-lpc", "simple-mfd"; + compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon"; reg = <0x1e789000 0x1000>; + reg-io-width = <4>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x1e789000 0x1000>; - lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon"; - reg = <0x0 0x80>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x80>; - - kcs1: kcs@24 { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - kcs_chan = <1>; - status = "disabled"; - }; - kcs2: kcs@28 { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - kcs3: kcs@2c { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; - interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; + kcs1: kcs@24 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <1>; + status = "disabled"; + }; + + kcs2: kcs@28 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + kcs3: kcs@2c { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + kcs4: kcs@114 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + lpc_ctrl: lpc-ctrl@80 { + compatible = "aspeed,ast2600-lpc-ctrl"; + reg = <0x80 0x80>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; + }; + + lpc_snoop: lpc-snoop@80 { + compatible = "aspeed,ast2600-lpc-snoop"; + reg = <0x80 0x80>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; }; - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80 0x1e0>; - - kcs4: kcs@94 { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - lpc_ctrl: lpc-ctrl@0 { - compatible = "aspeed,ast2600-lpc-ctrl"; - reg = <0x0 0x80>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - status = "disabled"; - }; - - lpc_snoop: lpc-snoop@0 { - compatible = "aspeed,ast2600-lpc-snoop"; - reg = <0x0 0x80>; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - status = "disabled"; - }; - - lhc: lhc@20 { - compatible = "aspeed,ast2600-lhc"; - reg = <0x20 0x24 0x48 0x8>; - }; - - lpc_reset: reset-controller@18 { - compatible = "aspeed,ast2600-lpc-reset"; - reg = <0x18 0x4>; - #reset-cells = <1>; - }; - - ibt: ibt@c0 { - compatible = "aspeed,ast2600-ibt-bmc"; - reg = <0xc0 0x18>; - interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; + lhc: lhc@a0 { + compatible = "aspeed,ast2600-lhc"; + reg = <0xa0 0x24 0xc8 0x8>; + }; + + lpc_reset: reset-controller@98 { + compatible = "aspeed,ast2600-lpc-reset"; + reg = <0x98 0x4>; + #reset-cells = <1>; + }; + + ibt: ibt@140 { + compatible = "aspeed,ast2600-ibt-bmc"; + reg = <0x140 0x18>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; }; diff --git a/drivers/char/ipmi/kcs_bmc_aspeed.c b/drivers/char/ipmi/kcs_bmc_aspeed.c index a140203c079b..eefe362f65f0 100644 --- a/drivers/char/ipmi/kcs_bmc_aspeed.c +++ b/drivers/char/ipmi/kcs_bmc_aspeed.c @@ -27,7 +27,6 @@ #define KCS_CHANNEL_MAX 4 -/* mapped to lpc-bmc@0 IO space */ #define LPC_HICR0 0x000 #define LPC_HICR0_LPC3E BIT(7) #define LPC_HICR0_LPC2E BIT(6) @@ -52,15 +51,13 @@ #define LPC_STR1 0x03C #define LPC_STR2 0x040 #define LPC_STR3 0x044 - -/* mapped to lpc-host@80 IO space */ -#define LPC_HICRB 0x080 +#define LPC_HICRB 0x100 #define LPC_HICRB_IBFIF4 BIT(1) #define LPC_HICRB_LPC4E BIT(0) -#define LPC_LADR4 0x090 -#define LPC_IDR4 0x094 -#define LPC_ODR4 0x098 -#define LPC_STR4 0x09C +#define LPC_LADR4 0x110 +#define LPC_IDR4 0x114 +#define LPC_ODR4 0x118 +#define LPC_STR4 0x11C struct aspeed_kcs_bmc { struct regmap *map; @@ -348,12 +345,20 @@ static int aspeed_kcs_probe(struct platform_device *pdev) struct device_node *np; int rc; - np = pdev->dev.of_node; + np = dev->of_node->parent; + if (!of_device_is_compatible(np, "aspeed,ast2400-lpc-v2") && + !of_device_is_compatible(np, "aspeed,ast2500-lpc-v2") && + !of_device_is_compatible(np, "aspeed,ast2600-lpc-v2")) { + dev_err(dev, "unsupported LPC device binding\n"); + return -ENODEV; + } + + np = dev->of_node; if (of_device_is_compatible(np, "aspeed,ast2400-kcs-bmc") || - of_device_is_compatible(np, "aspeed,ast2500-kcs-bmc")) + of_device_is_compatible(np, "aspeed,ast2500-kcs-bmc")) kcs_bmc = aspeed_kcs_probe_of_v1(pdev); else if (of_device_is_compatible(np, "aspeed,ast2400-kcs-bmc-v2") || - of_device_is_compatible(np, "aspeed,ast2500-kcs-bmc-v2")) + of_device_is_compatible(np, "aspeed,ast2500-kcs-bmc-v2")) kcs_bmc = aspeed_kcs_probe_of_v2(pdev); else return -EINVAL; diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c index 0cab4c2576e2..996ebcba4d38 100644 --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c @@ -60,7 +60,7 @@ #define COND2 { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 } /* LHCR0 is offset from the end of the H8S/2168-compatible registers */ -#define LHCR0 0x20 +#define LHCR0 0xa0 #define GFX064 0x64 #define B14 0 @@ -2648,14 +2648,19 @@ static struct regmap *aspeed_g5_acquire_regmap(struct aspeed_pinmux_data *ctx, } if (ip == ASPEED_IP_LPC) { - struct device_node *node; + struct device_node *np; struct regmap *map; - node = of_parse_phandle(ctx->dev->of_node, + np = of_parse_phandle(ctx->dev->of_node, "aspeed,external-nodes", 1); - if (node) { - map = syscon_node_to_regmap(node->parent); - of_node_put(node); + if (np) { + if (!of_device_is_compatible(np->parent, "aspeed,ast2400-lpc-v2") && + !of_device_is_compatible(np->parent, "aspeed,ast2500-lpc-v2") && + !of_device_is_compatible(np->parent, "aspeed,ast2600-lpc-v2")) + return ERR_PTR(-ENODEV); + + map = syscon_node_to_regmap(np->parent); + of_node_put(np); if (IS_ERR(map)) return map; } else diff --git a/drivers/soc/aspeed/aspeed-lpc-ctrl.c b/drivers/soc/aspeed/aspeed-lpc-ctrl.c index 439bcd6b8c4a..c557ffd0992c 100644 --- a/drivers/soc/aspeed/aspeed-lpc-ctrl.c +++ b/drivers/soc/aspeed/aspeed-lpc-ctrl.c @@ -18,15 +18,15 @@ #define DEVICE_NAME "aspeed-lpc-ctrl" -#define HICR5 0x0 +#define HICR5 0x80 #define HICR5_ENL2H BIT(8) #define HICR5_ENFWH BIT(10) -#define HICR6 0x4 +#define HICR6 0x84 #define SW_FWH2AHB BIT(17) -#define HICR7 0x8 -#define HICR8 0xc +#define HICR7 0x88 +#define HICR8 0x8c struct aspeed_lpc_ctrl { struct miscdevice miscdev; @@ -215,6 +215,7 @@ static int aspeed_lpc_ctrl_probe(struct platform_device *pdev) struct device_node *node; struct resource resm; struct device *dev; + struct device_node *np; int rc; dev = &pdev->dev; @@ -270,8 +271,15 @@ static int aspeed_lpc_ctrl_probe(struct platform_device *pdev) } } - lpc_ctrl->regmap = syscon_node_to_regmap( - pdev->dev.parent->of_node); + np = pdev->dev.parent->of_node; + if (!of_device_is_compatible(np, "aspeed,ast2400-lpc-v2") && + !of_device_is_compatible(np, "aspeed,ast2500-lpc-v2") && + !of_device_is_compatible(np, "aspeed,ast2600-lpc-v2")) { + dev_err(dev, "unsupported LPC device binding\n"); + return -ENODEV; + } + + lpc_ctrl->regmap = syscon_node_to_regmap(np); if (IS_ERR(lpc_ctrl->regmap)) { dev_err(dev, "Couldn't get regmap\n"); return -ENODEV; diff --git a/drivers/soc/aspeed/aspeed-lpc-snoop.c b/drivers/soc/aspeed/aspeed-lpc-snoop.c index 20acac6342ef..210455efb321 100644 --- a/drivers/soc/aspeed/aspeed-lpc-snoop.c +++ b/drivers/soc/aspeed/aspeed-lpc-snoop.c @@ -29,26 +29,25 @@ #define NUM_SNOOP_CHANNELS 2 #define SNOOP_FIFO_SIZE 2048 -#define HICR5 0x0 +#define HICR5 0x80 #define HICR5_EN_SNP0W BIT(0) #define HICR5_ENINT_SNP0W BIT(1) #define HICR5_EN_SNP1W BIT(2) #define HICR5_ENINT_SNP1W BIT(3) - -#define HICR6 0x4 +#define HICR6 0x84 #define HICR6_STR_SNP0W BIT(0) #define HICR6_STR_SNP1W BIT(1) -#define SNPWADR 0x10 +#define SNPWADR 0x90 #define SNPWADR_CH0_MASK GENMASK(15, 0) #define SNPWADR_CH0_SHIFT 0 #define SNPWADR_CH1_MASK GENMASK(31, 16) #define SNPWADR_CH1_SHIFT 16 -#define SNPWDR 0x14 +#define SNPWDR 0x94 #define SNPWDR_CH0_MASK GENMASK(7, 0) #define SNPWDR_CH0_SHIFT 0 #define SNPWDR_CH1_MASK GENMASK(15, 8) #define SNPWDR_CH1_SHIFT 8 -#define HICRB 0x80 +#define HICRB 0x100 #define HICRB_ENSNP0D BIT(14) #define HICRB_ENSNP1D BIT(15) @@ -260,6 +259,7 @@ static int aspeed_lpc_snoop_probe(struct platform_device *pdev) { struct aspeed_lpc_snoop *lpc_snoop; struct device *dev; + struct device_node *np; u32 port; int rc; @@ -269,8 +269,15 @@ static int aspeed_lpc_snoop_probe(struct platform_device *pdev) if (!lpc_snoop) return -ENOMEM; - lpc_snoop->regmap = syscon_node_to_regmap( - pdev->dev.parent->of_node); + np = pdev->dev.parent->of_node; + if (!of_device_is_compatible(np, "aspeed,ast2400-lpc-v2") && + !of_device_is_compatible(np, "aspeed,ast2500-lpc-v2") && + !of_device_is_compatible(np, "aspeed,ast2600-lpc-v2")) { + dev_err(dev, "unsupported LPC device binding\n"); + return -ENODEV; + } + + lpc_snoop->regmap = syscon_node_to_regmap(np); if (IS_ERR(lpc_snoop->regmap)) { dev_err(dev, "Couldn't get regmap\n"); return -ENODEV; |