summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/mtd/atmel-nand.txt6
-rw-r--r--Documentation/devicetree/bindings/mtd/diskonchip.txt15
-rw-r--r--Documentation/devicetree/bindings/mtd/gpio-control-nand.txt14
-rw-r--r--Documentation/devicetree/bindings/mtd/sunxi-nand.txt45
-rw-r--r--drivers/memory/fsl_ifc.c13
-rw-r--r--drivers/mtd/Kconfig2
-rw-r--r--drivers/mtd/bcm47xxpart.c28
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0001.c3
-rw-r--r--drivers/mtd/devices/docg3.c122
-rw-r--r--drivers/mtd/devices/m25p80.c30
-rw-r--r--drivers/mtd/devices/mtd_dataflash.c6
-rw-r--r--drivers/mtd/devices/phram.c2
-rw-r--r--drivers/mtd/devices/pmc551.c3
-rw-r--r--drivers/mtd/inftlmount.c2
-rw-r--r--drivers/mtd/maps/bfin-async-flash.c1
-rw-r--r--drivers/mtd/maps/physmap_of.c8
-rw-r--r--drivers/mtd/nand/Kconfig12
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/atmel_nand.c120
-rw-r--r--drivers/mtd/nand/atmel_nand_ecc.h4
-rw-r--r--drivers/mtd/nand/cafe_nand.c45
-rw-r--r--drivers/mtd/nand/fsl_ifc_nand.c10
-rw-r--r--drivers/mtd/nand/gpio.c4
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-lib.c153
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c201
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.h6
-rw-r--r--drivers/mtd/nand/mxc_nand.c10
-rw-r--r--drivers/mtd/nand/nand_base.c12
-rw-r--r--drivers/mtd/nand/nand_ids.c1
-rw-r--r--drivers/mtd/nand/nandsim.c42
-rw-r--r--drivers/mtd/nand/omap2.c24
-rw-r--r--drivers/mtd/nand/orion_nand.c39
-rw-r--r--drivers/mtd/nand/sunxi_nand.c1432
-rw-r--r--drivers/mtd/spi-nor/fsl-quadspi.c23
-rw-r--r--drivers/mtd/spi-nor/spi-nor.c313
-rw-r--r--drivers/mtd/tests/oobtest.c77
-rw-r--r--drivers/mtd/tests/torturetest.c4
-rw-r--r--fs/jffs2/readinode.c2
-rw-r--r--fs/jffs2/summary.c1
-rw-r--r--include/linux/fsl_ifc.h21
-rw-r--r--include/linux/mtd/nand.h18
-rw-r--r--include/linux/mtd/spi-nor.h11
42 files changed, 2414 insertions, 472 deletions
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index 6edc3b616e98..1fe6dde98499 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -5,7 +5,9 @@ Required properties:
- reg : should specify localbus address and size used for the chip,
and hardware ECC controller if available.
If the hardware ECC is PMECC, it should contain address and size for
- PMECC, PMECC Error Location controller and ROM which has lookup tables.
+ PMECC and PMECC Error Location controller.
+ The PMECC lookup table address and size in ROM is optional. If not
+ specified, driver will build it in runtime.
- atmel,nand-addr-offset : offset for the address latch.
- atmel,nand-cmd-offset : offset for the command latch.
- #address-cells, #size-cells : Must be present if the device has sub-nodes
@@ -27,7 +29,7 @@ Optional properties:
are: 512, 1024.
- atmel,pmecc-lookup-table-offset : includes two offsets of lookup table in ROM
for different sector size. First one is for sector size 512, the next is for
- sector size 1024.
+ sector size 1024. If not specified, driver will build the table in runtime.
- nand-bus-width : 8 or 16 bus width if not present 8
- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
- Nand Flash Controller(NFC) is a slave driver under Atmel nand flash
diff --git a/Documentation/devicetree/bindings/mtd/diskonchip.txt b/Documentation/devicetree/bindings/mtd/diskonchip.txt
new file mode 100644
index 000000000000..3e13bfdbea5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/diskonchip.txt
@@ -0,0 +1,15 @@
+M-Systems and Sandisk DiskOnChip devices
+
+M-System DiskOnChip G3
+======================
+The Sandisk (formerly M-Systems) docg3 is a nand device of 64M to 256MB.
+
+Required properties:
+ - compatible: should be "m-systems,diskonchip-g3"
+ - reg: register base and size
+
+Example:
+ docg3: flash@0 {
+ compatible = "m-systems,diskonchip-g3";
+ reg = <0x0 0x2000>;
+ };
diff --git a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
index 36ef07d3c90f..af8915b41ccf 100644
--- a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
@@ -11,8 +11,8 @@ Required properties:
are made in native endianness.
- #address-cells, #size-cells : Must be present if the device has sub-nodes
representing partitions.
-- gpios : specifies the gpio pins to control the NAND device. nwp is an
- optional gpio and may be set to 0 if not present.
+- gpios : Specifies the GPIO pins to control the NAND device. The order of
+ GPIO references is: RDY, nCE, ALE, CLE, and an optional nWP.
Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
@@ -35,11 +35,11 @@ gpio-nand@1,0 {
reg = <1 0x0000 0x2>;
#address-cells = <1>;
#size-cells = <1>;
- gpios = <&banka 1 0 /* rdy */
- &banka 2 0 /* nce */
- &banka 3 0 /* ale */
- &banka 4 0 /* cle */
- 0 /* nwp */>;
+ gpios = <&banka 1 0>, /* RDY */
+ <&banka 2 0>, /* nCE */
+ <&banka 3 0>, /* ALE */
+ <&banka 4 0>, /* CLE */
+ <0>; /* nWP */
partition@0 {
...
diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
new file mode 100644
index 000000000000..0273adb8638c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
@@ -0,0 +1,45 @@
+Allwinner NAND Flash Controller (NFC)
+
+Required properties:
+- compatible : "allwinner,sun4i-a10-nand".
+- reg : shall contain registers location and length for data and reg.
+- interrupts : shall define the nand controller interrupt.
+- #address-cells: shall be set to 1. Encode the nand CS.
+- #size-cells : shall be set to 0.
+- clocks : shall reference nand controller clocks.
+- clock-names : nand controller internal clock names. Shall contain :
+ * "ahb" : AHB gating clock
+ * "mod" : nand controller clock
+
+Optional children nodes:
+Children nodes represent the available nand chips.
+
+Optional properties:
+- allwinner,rb : shall contain the native Ready/Busy ids.
+ or
+- rb-gpios : shall contain the gpios used as R/B pins.
+- nand-ecc-mode : one of the supported ECC modes ("hw", "hw_syndrome", "soft",
+ "soft_bch" or "none")
+
+see Documentation/devicetree/mtd/nand.txt for generic bindings.
+
+
+Examples:
+nfc: nand@01c03000 {
+ compatible = "allwinner,sun4i-a10-nand";
+ reg = <0x01c03000 0x1000>;
+ interrupts = <0 37 1>;
+ clocks = <&ahb_gates 13>, <&nand_clk>;
+ clock-names = "ahb", "mod";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ allwinner,rb = <0>;
+ nand-ecc-mode = "soft_bch";
+ };
+};
diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c
index 3d5d792d5cb2..410c39749872 100644
--- a/drivers/memory/fsl_ifc.c
+++ b/drivers/memory/fsl_ifc.c
@@ -61,7 +61,7 @@ int fsl_ifc_find(phys_addr_t addr_base)
if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->regs)
return -ENODEV;
- for (i = 0; i < ARRAY_SIZE(fsl_ifc_ctrl_dev->regs->cspr_cs); i++) {
+ for (i = 0; i < fsl_ifc_ctrl_dev->banks; i++) {
u32 cspr = in_be32(&fsl_ifc_ctrl_dev->regs->cspr_cs[i].cspr);
if (cspr & CSPR_V && (cspr & CSPR_BA) ==
convert_ifc_address(addr_base))
@@ -213,7 +213,7 @@ static irqreturn_t fsl_ifc_ctrl_irq(int irqno, void *data)
static int fsl_ifc_ctrl_probe(struct platform_device *dev)
{
int ret = 0;
-
+ int version, banks;
dev_info(&dev->dev, "Freescale Integrated Flash Controller\n");
@@ -231,6 +231,15 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
goto err;
}
+ version = ioread32be(&fsl_ifc_ctrl_dev->regs->ifc_rev) &
+ FSL_IFC_VERSION_MASK;
+ banks = (version == FSL_IFC_VERSION_1_0_0) ? 4 : 8;
+ dev_info(&dev->dev, "IFC version %d.%d, %d banks\n",
+ version >> 24, (version >> 16) & 0xf, banks);
+
+ fsl_ifc_ctrl_dev->version = version;
+ fsl_ifc_ctrl_dev->banks = banks;
+
/* get the Controller level irq */
fsl_ifc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
if (fsl_ifc_ctrl_dev->irq == NO_IRQ) {
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 94b821042d9d..71fea895ce38 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -133,7 +133,7 @@ config MTD_OF_PARTS
help
This provides a partition parsing function which derives
the partition map from the children of the flash node,
- as described in Documentation/devicetree/booting-without-of.txt.
+ as described in Documentation/devicetree/bindings/mtd/partition.txt.
config MTD_AR7_PARTS
tristate "TI AR7 partitioning support"
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index 8057f52a45b7..cc13ea5ce4d5 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -15,8 +15,12 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-/* 10 parts were found on sflash on Netgear WNDR4500 */
-#define BCM47XXPART_MAX_PARTS 12
+/*
+ * NAND flash on Netgear R6250 was verified to contain 15 partitions.
+ * This will result in allocating too big array for some old devices, but the
+ * memory will be freed soon anyway (see mtd_device_parse_register).
+ */
+#define BCM47XXPART_MAX_PARTS 20
/*
* Amount of bytes we read when analyzing each block of flash memory.
@@ -168,18 +172,26 @@ static int bcm47xxpart_parse(struct mtd_info *master,
i++;
}
- bcm47xxpart_add_part(&parts[curr_part++], "linux",
- offset + trx->offset[i], 0);
- i++;
+ if (trx->offset[i]) {
+ bcm47xxpart_add_part(&parts[curr_part++],
+ "linux",
+ offset + trx->offset[i],
+ 0);
+ i++;
+ }
/*
* Pure rootfs size is known and can be calculated as:
* trx->length - trx->offset[i]. We don't fill it as
* we want to have jffs2 (overlay) in the same mtd.
*/
- bcm47xxpart_add_part(&parts[curr_part++], "rootfs",
- offset + trx->offset[i], 0);
- i++;
+ if (trx->offset[i]) {
+ bcm47xxpart_add_part(&parts[curr_part++],
+ "rootfs",
+ offset + trx->offset[i],
+ 0);
+ i++;
+ }
last_trx_part = curr_part - 1;
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 3096f3ded3ad..286b97a304cf 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -2654,8 +2654,7 @@ static void cfi_intelext_destroy(struct mtd_info *mtd)
kfree(cfi);
for (i = 0; i < mtd->numeraseregions; i++) {
region = &mtd->eraseregions[i];
- if (region->lockmap)
- kfree(region->lockmap);
+ kfree(region->lockmap);
}
kfree(mtd->eraseregions);
}
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 72346048532d..448ce42f951e 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/string.h>
#include <linux/slab.h>
@@ -1655,22 +1656,21 @@ static int dbg_flashctrl_show(struct seq_file *s, void *p)
{
struct docg3 *docg3 = (struct docg3 *)s->private;
- int pos = 0;
u8 fctrl;
mutex_lock(&docg3->cascade->lock);
fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
mutex_unlock(&docg3->cascade->lock);
- pos += seq_printf(s,
- "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n",
- fctrl,
- fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-",
- fctrl & DOC_CTRL_CE ? "active" : "inactive",
- fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-",
- fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-",
- fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready");
- return pos;
+ seq_printf(s, "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n",
+ fctrl,
+ fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-",
+ fctrl & DOC_CTRL_CE ? "active" : "inactive",
+ fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-",
+ fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-",
+ fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready");
+
+ return 0;
}
DEBUGFS_RO_ATTR(flashcontrol, dbg_flashctrl_show);
@@ -1678,58 +1678,56 @@ static int dbg_asicmode_show(struct seq_file *s, void *p)
{
struct docg3 *docg3 = (struct docg3 *)s->private;
- int pos = 0, pctrl, mode;
+ int pctrl, mode;
mutex_lock(&docg3->cascade->lock);
pctrl = doc_register_readb(docg3, DOC_ASICMODE);
mode = pctrl & 0x03;
mutex_unlock(&docg3->cascade->lock);
- pos += seq_printf(s,
- "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (",
- pctrl,
- pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0,
- pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0,
- pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0,
- pctrl & DOC_ASICMODE_MDWREN ? 1 : 0,
- pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0,
- mode >> 1, mode & 0x1);
+ seq_printf(s,
+ "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (",
+ pctrl,
+ pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0,
+ pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0,
+ pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0,
+ pctrl & DOC_ASICMODE_MDWREN ? 1 : 0,
+ pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0,
+ mode >> 1, mode & 0x1);
switch (mode) {
case DOC_ASICMODE_RESET:
- pos += seq_puts(s, "reset");
+ seq_puts(s, "reset");
break;
case DOC_ASICMODE_NORMAL:
- pos += seq_puts(s, "normal");
+ seq_puts(s, "normal");
break;
case DOC_ASICMODE_POWERDOWN:
- pos += seq_puts(s, "powerdown");
+ seq_puts(s, "powerdown");
break;
}
- pos += seq_puts(s, ")\n");
- return pos;
+ seq_puts(s, ")\n");
+ return 0;
}
DEBUGFS_RO_ATTR(asic_mode, dbg_asicmode_show);
static int dbg_device_id_show(struct seq_file *s, void *p)
{
struct docg3 *docg3 = (struct docg3 *)s->private;
- int pos = 0;
int id;
mutex_lock(&docg3->cascade->lock);
id = doc_register_readb(docg3, DOC_DEVICESELECT);
mutex_unlock(&docg3->cascade->lock);
- pos += seq_printf(s, "DeviceId = %d\n", id);
- return pos;
+ seq_printf(s, "DeviceId = %d\n", id);
+ return 0;
}
DEBUGFS_RO_ATTR(device_id, dbg_device_id_show);
static int dbg_protection_show(struct seq_file *s, void *p)
{
struct docg3 *docg3 = (struct docg3 *)s->private;
- int pos = 0;
int protect, dps0, dps0_low, dps0_high, dps1, dps1_low, dps1_high;
mutex_lock(&docg3->cascade->lock);
@@ -1742,45 +1740,40 @@ static int dbg_protection_show(struct seq_file *s, void *p)
dps1_high = doc_register_readw(docg3, DOC_DPS1_ADDRHIGH);
mutex_unlock(&docg3->cascade->lock);
- pos += seq_printf(s, "Protection = 0x%02x (",
- protect);
+ seq_printf(s, "Protection = 0x%02x (", protect);
if (protect & DOC_PROTECT_FOUNDRY_OTP_LOCK)
- pos += seq_puts(s, "FOUNDRY_OTP_LOCK,");
+ seq_puts(s, "FOUNDRY_OTP_LOCK,");
if (protect & DOC_PROTECT_CUSTOMER_OTP_LOCK)
- pos += seq_puts(s, "CUSTOMER_OTP_LOCK,");
+ seq_puts(s, "CUSTOMER_OTP_LOCK,");
if (protect & DOC_PROTECT_LOCK_INPUT)
- pos += seq_puts(s, "LOCK_INPUT,");
+ seq_puts(s, "LOCK_INPUT,");
if (protect & DOC_PROTECT_STICKY_LOCK)
- pos += seq_puts(s, "STICKY_LOCK,");
+ seq_puts(s, "STICKY_LOCK,");
if (protect & DOC_PROTECT_PROTECTION_ENABLED)
- pos += seq_puts(s, "PROTECTION ON,");
+ seq_puts(s, "PROTECTION ON,");
if (protect & DOC_PROTECT_IPL_DOWNLOAD_LOCK)
- pos += seq_puts(s, "IPL_DOWNLOAD_LOCK,");
+ seq_puts(s, "IPL_DOWNLOAD_LOCK,");
if (protect & DOC_PROTECT_PROTECTION_ERROR)
- pos += seq_puts(s, "PROTECT_ERR,");
+ seq_puts(s, "PROTECT_ERR,");
else
- pos += seq_puts(s, "NO_PROTECT_ERR");
- pos += seq_puts(s, ")\n");
-
- pos += seq_printf(s, "DPS0 = 0x%02x : "
- "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
- "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
- dps0, dps0_low, dps0_high,
- !!(dps0 & DOC_DPS_OTP_PROTECTED),
- !!(dps0 & DOC_DPS_READ_PROTECTED),
- !!(dps0 & DOC_DPS_WRITE_PROTECTED),
- !!(dps0 & DOC_DPS_HW_LOCK_ENABLED),
- !!(dps0 & DOC_DPS_KEY_OK));
- pos += seq_printf(s, "DPS1 = 0x%02x : "
- "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
- "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
- dps1, dps1_low, dps1_high,
- !!(dps1 & DOC_DPS_OTP_PROTECTED),
- !!(dps1 & DOC_DPS_READ_PROTECTED),
- !!(dps1 & DOC_DPS_WRITE_PROTECTED),
- !!(dps1 & DOC_DPS_HW_LOCK_ENABLED),
- !!(dps1 & DOC_DPS_KEY_OK));
- return pos;
+ seq_puts(s, "NO_PROTECT_ERR");
+ seq_puts(s, ")\n");
+
+ seq_printf(s, "DPS0 = 0x%02x : Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+ dps0, dps0_low, dps0_high,
+ !!(dps0 & DOC_DPS_OTP_PROTECTED),
+ !!(dps0 & DOC_DPS_READ_PROTECTED),
+ !!(dps0 & DOC_DPS_WRITE_PROTECTED),
+ !!(dps0 & DOC_DPS_HW_LOCK_ENABLED),
+ !!(dps0 & DOC_DPS_KEY_OK));
+ seq_printf(s, "DPS1 = 0x%02x : Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+ dps1, dps1_low, dps1_high,
+ !!(dps1 & DOC_DPS_OTP_PROTECTED),
+ !!(dps1 & DOC_DPS_READ_PROTECTED),
+ !!(dps1 & DOC_DPS_WRITE_PROTECTED),
+ !!(dps1 & DOC_DPS_HW_LOCK_ENABLED),
+ !!(dps1 & DOC_DPS_KEY_OK));
+ return 0;
}
DEBUGFS_RO_ATTR(protection, dbg_protection_show);
@@ -2126,9 +2119,18 @@ static int __exit docg3_release(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static struct of_device_id docg3_dt_ids[] = {
+ { .compatible = "m-systems,diskonchip-g3" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, docg3_dt_ids);
+#endif
+
static struct platform_driver g3_driver = {
.driver = {
.name = "docg3",
+ .of_match_table = of_match_ptr(docg3_dt_ids),
},
.suspend = docg3_suspend,
.resume = docg3_resume,
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index ed827cf894e4..85e35467fba6 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -128,13 +128,10 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
struct spi_device *spi = flash->spi;
struct spi_transfer t[2];
struct spi_message m;
- int dummy = nor->read_dummy;
- int ret;
+ unsigned int dummy = nor->read_dummy;
- /* Wait till previous write/erase is done. */
- ret = nor->wait_till_ready(nor);
- if (ret)
- return ret;
+ /* convert the dummy cycles to the number of bytes */
+ dummy /= 8;
spi_message_init(&m);
memset(t, 0, (sizeof t));
@@ -160,21 +157,10 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
static int m25p80_erase(struct spi_nor *nor, loff_t offset)
{
struct m25p *flash = nor->priv;
- int ret;
dev_dbg(nor->dev, "%dKiB at 0x%08x\n",
flash->mtd.erasesize / 1024, (u32)offset);
- /* Wait until finished previous write command. */
- ret = nor->wait_till_ready(nor);
- if (ret)
- return ret;
-
- /* Send write enable, then erase commands. */
- ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
- if (ret)
- return ret;
-
/* Set up command buffer. */
flash->command[0] = nor->erase_opcode;
m25p_addr2cmd(nor, offset, flash->command);
@@ -260,7 +246,6 @@ static int m25p_remove(struct spi_device *spi)
return mtd_device_unregister(&flash->mtd);
}
-
/*
* XXX This needs to be kept in sync with spi_nor_ids. We can't share
* it with spi-nor, because if this is built as a module then modpost
@@ -287,7 +272,7 @@ static const struct spi_device_id m25p_ids[] = {
{"s25fl512s"}, {"s70fl01gs"}, {"s25sl12800"}, {"s25sl12801"},
{"s25fl129p0"}, {"s25fl129p1"}, {"s25sl004a"}, {"s25sl008a"},
{"s25sl016a"}, {"s25sl032a"}, {"s25sl064a"}, {"s25fl008k"},
- {"s25fl016k"}, {"s25fl064k"},
+ {"s25fl016k"}, {"s25fl064k"}, {"s25fl132k"},
{"sst25vf040b"},{"sst25vf080b"},{"sst25vf016b"},{"sst25vf032b"},
{"sst25vf064c"},{"sst25wf512"}, {"sst25wf010"}, {"sst25wf020"},
{"sst25wf040"},
@@ -300,17 +285,16 @@ static const struct spi_device_id m25p_ids[] = {
{"m45pe10"}, {"m45pe80"}, {"m45pe16"},
{"m25pe20"}, {"m25pe80"}, {"m25pe16"},
{"m25px16"}, {"m25px32"}, {"m25px32-s0"}, {"m25px32-s1"},
- {"m25px64"},
+ {"m25px64"}, {"m25px80"},
{"w25x10"}, {"w25x20"}, {"w25x40"}, {"w25x80"},
{"w25x16"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"},
- {"w25x64"}, {"w25q64"}, {"w25q128"}, {"w25q80"},
- {"w25q80bl"}, {"w25q128"}, {"w25q256"}, {"cat25c11"},
+ {"w25x64"}, {"w25q64"}, {"w25q80"}, {"w25q80bl"},
+ {"w25q128"}, {"w25q256"}, {"cat25c11"},
{"cat25c03"}, {"cat25c09"}, {"cat25c17"}, {"cat25128"},
{ },
};
MODULE_DEVICE_TABLE(spi, m25p_ids);
-
static struct spi_driver m25p80_driver = {
.driver = {
.name = "m25p80",
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index dd22ce2cc9ad..0099aba72a8b 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -149,7 +149,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
{
struct dataflash *priv = mtd->priv;
struct spi_device *spi = priv->spi;
- struct spi_transfer x = { .tx_dma = 0, };
+ struct spi_transfer x = { };
struct spi_message msg;
unsigned blocksize = priv->page_size << 3;
uint8_t *command;
@@ -235,7 +235,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
struct dataflash *priv = mtd->priv;
- struct spi_transfer x[2] = { { .tx_dma = 0, }, };
+ struct spi_transfer x[2] = { };
struct spi_message msg;
unsigned int addr;
uint8_t *command;
@@ -301,7 +301,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
{
struct dataflash *priv = mtd->priv;
struct spi_device *spi = priv->spi;
- struct spi_transfer x[2] = { { .tx_dma = 0, }, };
+ struct spi_transfer x[2] = { };
struct spi_message msg;
unsigned int pageaddr, addr, offset, writelen;
size_t remaining = len;
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index effd9a4ef7ee..8b66e52ca3cc 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -17,7 +17,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index f02603e1bfeb..708b7e8c8b18 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -812,8 +812,7 @@ static int __init init_pmc551(void)
}
/* Exited early, reference left over */
- if (PCI_Device)
- pci_dev_put(PCI_Device);
+ pci_dev_put(PCI_Device);
if (!pmc551list) {
printk(KERN_NOTICE "pmc551: not detected\n");
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index 487e64f411a5..1388c8d7f309 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -518,7 +518,7 @@ void INFTL_dumpVUchains(struct INFTLrecord *s)
pr_debug("INFTL Virtual Unit Chains:\n");
for (logical = 0; logical < s->nb_blocks; logical++) {
block = s->VUtable[logical];
- if (block > s->nb_blocks)
+ if (block >= s->nb_blocks)
continue;
pr_debug(" LOGICAL %d --> %d ", logical, block);
for (i = 0; i < s->nb_blocks; i++) {
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
index 6ea51e549045..41730feeace8 100644
--- a/drivers/mtd/maps/bfin-async-flash.c
+++ b/drivers/mtd/maps/bfin-async-flash.c
@@ -126,7 +126,6 @@ static const char * const part_probe_types[] = {
static int bfin_flash_probe(struct platform_device *pdev)
{
- int ret;
struct physmap_flash_data *pdata = dev_get_platdata(&pdev->dev);
struct resource *memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *flash_ambctl = platform_get_resource(pdev, IORESOURCE_MEM, 1);
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index 991d0cb871f0..f35cd2081314 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -47,14 +47,12 @@ static int of_flash_remove(struct platform_device *dev)
return 0;
dev_set_drvdata(&dev->dev, NULL);
- if (info->cmtd != info->list[0].mtd) {
+ if (info->cmtd) {
mtd_device_unregister(info->cmtd);
- mtd_concat_destroy(info->cmtd);
+ if (info->cmtd != info->list[0].mtd)
+ mtd_concat_destroy(info->cmtd);
}
- if (info->cmtd)
- mtd_device_unregister(info->cmtd);
-
for (i = 0; i < info->list_size; i++) {
if (info->list[i].mtd)
map_destroy(info->list[i].mtd);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index dd10646982ae..7d0150d20432 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -75,10 +75,12 @@ config MTD_NAND_DENALI_SCRATCH_REG_ADDR
boards, the scratch register is at 0xFF108018.
config MTD_NAND_GPIO
- tristate "GPIO NAND Flash driver"
+ tristate "GPIO assisted NAND Flash driver"
depends on GPIOLIB
help
- This enables a GPIO based NAND flash driver.
+ This enables a NAND flash driver where control signals are
+ connected to GPIO pins, and commands and data are communicated
+ via a memory mapped interface.
config MTD_NAND_AMS_DELTA
tristate "NAND Flash device on Amstrad E3"
@@ -516,4 +518,10 @@ config MTD_NAND_XWAY
Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
to the External Bus Unit (EBU).
+config MTD_NAND_SUNXI
+ tristate "Support for NAND on Allwinner SoCs"
+ depends on ARCH_SUNXI
+ help
+ Enables support for NAND Flash chips on Allwinner SoCs.
+
endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 9c847e469ca7..bd38f21d2e28 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -50,5 +50,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
+obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o
nand-objs := nand_base.o nand_bbt.o nand_timings.o
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 84c38f3c65b0..a345e7b2463a 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -92,7 +92,7 @@ static struct nand_ecclayout atmel_oobinfo_small = {
struct atmel_nfc {
void __iomem *base_cmd_regs;
void __iomem *hsmc_regs;
- void __iomem *sram_bank0;
+ void *sram_bank0;
dma_addr_t sram_bank0_phys;
bool use_nfc_sram;
bool write_by_sram;
@@ -105,7 +105,7 @@ struct atmel_nfc {
struct completion comp_xfer_done;
/* Point to the sram bank which include readed data via NFC */
- void __iomem *data_in_sram;
+ void *data_in_sram;
bool will_write_sram;
};
static struct atmel_nfc nand_nfc;
@@ -127,6 +127,7 @@ struct atmel_nand_host {
bool has_pmecc;
u8 pmecc_corr_cap;
u16 pmecc_sector_size;
+ bool has_no_lookup_table;
u32 pmecc_lookup_table_offset;
u32 pmecc_lookup_table_offset_512;
u32 pmecc_lookup_table_offset_1024;
@@ -256,26 +257,6 @@ static int atmel_nand_set_enable_ready_pins(struct mtd_info *mtd)
return res;
}
-static void memcpy32_fromio(void *trg, const void __iomem *src, size_t size)
-{
- int i;
- u32 *t = trg;
- const __iomem u32 *s = src;
-
- for (i = 0; i < (size >> 2); i++)
- *t++ = readl_relaxed(s++);
-}
-
-static void memcpy32_toio(void __iomem *trg, const void *src, int size)
-{
- int i;
- u32 __iomem *t = trg;
- const u32 *s = src;
-
- for (i = 0; i < (size >> 2); i++)
- writel_relaxed(*s++, t++);
-}
-
/*
* Minimal-overhead PIO for data access.
*/
@@ -285,7 +266,7 @@ static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
struct atmel_nand_host *host = nand_chip->priv;
if (host->nfc && host->nfc->use_nfc_sram && host->nfc->data_in_sram) {
- memcpy32_fromio(buf, host->nfc->data_in_sram, len);
+ memcpy(buf, host->nfc->data_in_sram, len);
host->nfc->data_in_sram += len;
} else {
__raw_readsb(nand_chip->IO_ADDR_R, buf, len);
@@ -298,7 +279,7 @@ static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
struct atmel_nand_host *host = nand_chip->priv;
if (host->nfc && host->nfc->use_nfc_sram && host->nfc->data_in_sram) {
- memcpy32_fromio(buf, host->nfc->data_in_sram, len);
+ memcpy(buf, host->nfc->data_in_sram, len);
host->nfc->data_in_sram += len;
} else {
__raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
@@ -1112,12 +1093,66 @@ static int pmecc_choose_ecc(struct atmel_nand_host *host,
return 0;
}
+static inline int deg(unsigned int poly)
+{
+ /* polynomial degree is the most-significant bit index */
+ return fls(poly) - 1;
+}
+
+static int build_gf_tables(int mm, unsigned int poly,
+ int16_t *index_of, int16_t *alpha_to)
+{
+ unsigned int i, x = 1;
+ const unsigned int k = 1 << deg(poly);
+ unsigned int nn = (1 << mm) - 1;
+
+ /* primitive polynomial must be of degree m */
+ if (k != (1u << mm))
+ return -EINVAL;
+
+ for (i = 0; i < nn; i++) {
+ alpha_to[i] = x;
+ index_of[x] = i;
+ if (i && (x == 1))
+ /* polynomial is not primitive (a^i=1 with 0<i<2^m-1) */
+ return -EINVAL;
+ x <<= 1;
+ if (x & k)
+ x ^= poly;
+ }
+ alpha_to[nn] = 1;
+ index_of[0] = 0;
+
+ return 0;
+}
+
+static uint16_t *create_lookup_table(struct device *dev, int sector_size)
+{
+ int degree = (sector_size == 512) ?
+ PMECC_GF_DIMENSION_13 :
+ PMECC_GF_DIMENSION_14;
+ unsigned int poly = (sector_size == 512) ?
+ PMECC_GF_13_PRIMITIVE_POLY :
+ PMECC_GF_14_PRIMITIVE_POLY;
+ int table_size = (sector_size == 512) ?
+ PMECC_LOOKUP_TABLE_SIZE_512 :
+ PMECC_LOOKUP_TABLE_SIZE_1024;
+
+ int16_t *addr = devm_kzalloc(dev, 2 * table_size * sizeof(uint16_t),
+ GFP_KERNEL);
+ if (addr && build_gf_tables(degree, poly, addr, addr + table_size))
+ return NULL;
+
+ return addr;
+}
+
static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
struct atmel_nand_host *host)
{
struct mtd_info *mtd = &host->mtd;
struct nand_chip *nand_chip = &host->nand_chip;
struct resource *regs, *regs_pmerr, *regs_rom;
+ uint16_t *galois_table;
int cap, sector_size, err_no;
err_no = pmecc_choose_ecc(host, &cap, &sector_size);
@@ -1163,8 +1198,24 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
regs_rom = platform_get_resource(pdev, IORESOURCE_MEM, 3);
host->pmecc_rom_base = devm_ioremap_resource(&pdev->dev, regs_rom);
if (IS_ERR(host->pmecc_rom_base)) {
- err_no = PTR_ERR(host->pmecc_rom_base);
- goto err;
+ if (!host->has_no_lookup_table)
+ /* Don't display the information again */
+ dev_err(host->dev, "Can not get I/O resource for ROM, will build a lookup table in runtime!\n");
+
+ host->has_no_lookup_table = true;
+ }
+
+ if (host->has_no_lookup_table) {
+ /* Build the look-up table in runtime */
+ galois_table = create_lookup_table(host->dev, sector_size);
+ if (!galois_table) {
+ dev_err(host->dev, "Failed to build a lookup table in runtime!\n");
+ err_no = -EINVAL;
+ goto err;
+ }
+
+ host->pmecc_rom_base = (void __iomem *)galois_table;
+ host->pmecc_lookup_table_offset = 0;
}
nand_chip->ecc.size = sector_size;
@@ -1501,8 +1552,10 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
if (of_property_read_u32_array(np, "atmel,pmecc-lookup-table-offset",
offset, 2) != 0) {
- dev_err(host->dev, "Cannot get PMECC lookup table offset\n");
- return -EINVAL;
+ dev_err(host->dev, "Cannot get PMECC lookup table offset, will build a lookup table in runtime.\n");
+ host->has_no_lookup_table = true;
+ /* Will build a lookup table and initialize the offset later */
+ return 0;
}
if (!offset[0] && !offset[1]) {
dev_err(host->dev, "Invalid PMECC lookup table offset\n");
@@ -1899,7 +1952,7 @@ static int nfc_sram_write_page(struct mtd_info *mtd, struct nand_chip *chip,
int cfg, len;
int status = 0;
struct atmel_nand_host *host = chip->priv;
- void __iomem *sram = host->nfc->sram_bank0 + nfc_get_sram_off(host);
+ void *sram = host->nfc->sram_bank0 + nfc_get_sram_off(host);
/* Subpage write is not supported */
if (offset || (data_len < mtd->writesize))
@@ -1910,14 +1963,14 @@ static int nfc_sram_write_page(struct mtd_info *mtd, struct nand_chip *chip,
if (use_dma) {
if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) != 0)
/* Fall back to use cpu copy */
- memcpy32_toio(sram, buf, len);
+ memcpy(sram, buf, len);
} else {
- memcpy32_toio(sram, buf, len);
+ memcpy(sram, buf, len);
}
cfg = nfc_readl(host->nfc->hsmc_regs, CFG);
if (unlikely(raw) && oob_required) {
- memcpy32_toio(sram + len, chip->oob_poi, mtd->oobsize);
+ memcpy(sram + len, chip->oob_poi, mtd->oobsize);
len += mtd->oobsize;
nfc_writel(host->nfc->hsmc_regs, CFG, cfg | NFC_CFG_WSPARE);
} else {
@@ -2260,7 +2313,8 @@ static int atmel_nand_nfc_probe(struct platform_device *pdev)
nfc_sram = platform_get_resource(pdev, IORESOURCE_MEM, 2);
if (nfc_sram) {
- nfc->sram_bank0 = devm_ioremap_resource(&pdev->dev, nfc_sram);
+ nfc->sram_bank0 = (void * __force)
+ devm_ioremap_resource(&pdev->dev, nfc_sram);
if (IS_ERR(nfc->sram_bank0)) {
dev_warn(&pdev->dev, "Fail to ioremap the NFC sram with error: %ld. So disable NFC sram.\n",
PTR_ERR(nfc->sram_bank0));
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
index 8a1e9a686759..d4035e335ad8 100644
--- a/drivers/mtd/nand/atmel_nand_ecc.h
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -142,6 +142,10 @@
#define PMECC_GF_DIMENSION_13 13
#define PMECC_GF_DIMENSION_14 14
+/* Primitive Polynomial used by PMECC */
+#define PMECC_GF_13_PRIMITIVE_POLY 0x201b
+#define PMECC_GF_14_PRIMITIVE_POLY 0x4443
+
#define PMECC_LOOKUP_TABLE_SIZE_512 0x2000
#define PMECC_LOOKUP_TABLE_SIZE_1024 0x4000
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 4e66726da9aa..9a0f45f1d932 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -529,50 +529,6 @@ static int cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
return 0;
}
-static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
- uint32_t offset, int data_len, const uint8_t *buf,
- int oob_required, int page, int cached, int raw)
-{
- int status;
-
- chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
-
- if (unlikely(raw))
- status = chip->ecc.write_page_raw(mtd, chip, buf, oob_required);
- else
- status = chip->ecc.write_page(mtd, chip, buf, oob_required);
-
- if (status < 0)
- return status;
-
- /*
- * Cached progamming disabled for now, Not sure if its worth the
- * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s)
- */
- cached = 0;
-
- if (!cached || !(chip->options & NAND_CACHEPRG)) {
-
- chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
- status = chip->waitfunc(mtd, chip);
- /*
- * See if operation failed and additional status checks are
- * available
- */
- if ((status & NAND_STATUS_FAIL) && (chip->errstat))
- status = chip->errstat(mtd, chip, FL_WRITING, status,
- page);
-
- if (status & NAND_STATUS_FAIL)
- return -EIO;
- } else {
- chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1);
- status = chip->waitfunc(mtd, chip);
- }
-
- return 0;
-}
-
static int cafe_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
{
return 0;
@@ -800,7 +756,6 @@ static int cafe_nand_probe(struct pci_dev *pdev,
cafe->nand.ecc.hwctl = (void *)cafe_nand_bug;
cafe->nand.ecc.calculate = (void *)cafe_nand_bug;
cafe->nand.ecc.correct = (void *)cafe_nand_bug;
- cafe->nand.write_page = cafe_nand_write_page;
cafe->nand.ecc.write_page = cafe_nand_write_page_lowlevel;
cafe->nand.ecc.write_oob = cafe_nand_write_oob;
cafe->nand.ecc.read_page = cafe_nand_read_page;
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index b9ef7a6bba42..4c05f4f6a5c6 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -31,7 +31,6 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/fsl_ifc.h>
-#define FSL_IFC_V1_1_0 0x01010000
#define ERR_BYTE 0xFF /* Value returned for read
bytes when read failed */
#define IFC_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait
@@ -877,7 +876,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
struct nand_chip *chip = &priv->chip;
struct nand_ecclayout *layout;
- u32 csor, ver;
+ u32 csor;
/* Fill in fsl_ifc_mtd structure */
priv->mtd.priv = chip;
@@ -984,8 +983,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
chip->ecc.mode = NAND_ECC_SOFT;
}
- ver = ioread32be(&ifc->ifc_rev);
- if (ver == FSL_IFC_V1_1_0)
+ if (ctrl->version == FSL_IFC_VERSION_1_1_0)
fsl_ifc_sram_init(priv);
return 0;
@@ -1045,12 +1043,12 @@ static int fsl_ifc_nand_probe(struct platform_device *dev)
}
/* find which chip select it is connected to */
- for (bank = 0; bank < FSL_IFC_BANK_COUNT; bank++) {
+ for (bank = 0; bank < fsl_ifc_ctrl_dev->banks; bank++) {
if (match_bank(ifc, bank, res.start))
break;
}
- if (bank >= FSL_IFC_BANK_COUNT) {
+ if (bank >= fsl_ifc_ctrl_dev->banks) {
dev_err(&dev->dev, "%s: address did not match any chip selects\n",
__func__);
return -ENODEV;
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index 918283999a4b..73c4048c3a56 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -8,7 +8,9 @@
*
* © 2004 Simtec Electronics
*
- * Device driver for NAND connected via GPIO
+ * Device driver for NAND flash that uses a memory mapped interface to
+ * read/write the NAND commands and data, and GPIO pins for control signals
+ * (the DT binding refers to this as "GPIO assisted NAND flash")
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 87e658ce23ef..27f272ed502a 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -1353,3 +1353,156 @@ int gpmi_read_page(struct gpmi_nand_data *this,
set_dma_type(this, DMA_FOR_READ_ECC_PAGE);
return start_dma_with_bch_irq(this, desc);
}
+
+/**
+ * gpmi_copy_bits - copy bits from one memory region to another
+ * @dst: destination buffer
+ * @dst_bit_off: bit offset we're starting to write at
+ * @src: source buffer
+ * @src_bit_off: bit offset we're starting to read from
+ * @nbits: number of bits to copy
+ *
+ * This functions copies bits from one memory region to another, and is used by
+ * the GPMI driver to copy ECC sections which are not guaranteed to be byte
+ * aligned.
+ *
+ * src and dst should not overlap.
+ *
+ */
+void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
+ const u8 *src, size_t src_bit_off,
+ size_t nbits)
+{
+ size_t i;
+ size_t nbytes;
+ u32 src_buffer = 0;
+ size_t bits_in_src_buffer = 0;
+
+ if (!nbits)
+ return;
+
+ /*
+ * Move src and dst pointers to the closest byte pointer and store bit
+ * offsets within a byte.
+ */
+ src += src_bit_off / 8;
+ src_bit_off %= 8;
+
+ dst += dst_bit_off / 8;
+ dst_bit_off %= 8;
+
+ /*
+ * Initialize the src_buffer value with bits available in the first
+ * byte of data so that we end up with a byte aligned src pointer.
+ */
+ if (src_bit_off) {
+ src_buffer = src[0] >> src_bit_off;
+ if (nbits >= (8 - src_bit_off)) {
+ bits_in_src_buffer += 8 - src_bit_off;
+ } else {
+ src_buffer &= GENMASK(nbits - 1, 0);
+ bits_in_src_buffer += nbits;
+ }
+ nbits -= bits_in_src_buffer;
+ src++;
+ }
+
+ /* Calculate the number of bytes that can be copied from src to dst. */
+ nbytes = nbits / 8;
+
+ /* Try to align dst to a byte boundary. */
+ if (dst_bit_off) {
+ if (bits_in_src_buffer < (8 - dst_bit_off) && nbytes) {
+ src_buffer |= src[0] << bits_in_src_buffer;
+ bits_in_src_buffer += 8;
+ src++;
+ nbytes--;
+ }
+
+ if (bits_in_src_buffer >= (8 - dst_bit_off)) {
+ dst[0] &= GENMASK(dst_bit_off - 1, 0);
+ dst[0] |= src_buffer << dst_bit_off;
+ src_buffer >>= (8 - dst_bit_off);
+ bits_in_src_buffer -= (8 - dst_bit_off);
+ dst_bit_off = 0;
+ dst++;
+ if (bits_in_src_buffer > 7) {
+ bits_in_src_buffer -= 8;
+ dst[0] = src_buffer;
+ dst++;
+ src_buffer >>= 8;
+ }
+ }
+ }
+
+ if (!bits_in_src_buffer && !dst_bit_off) {
+ /*
+ * Both src and dst pointers are byte aligned, thus we can
+ * just use the optimized memcpy function.
+ */
+ if (nbytes)
+ memcpy(dst, src, nbytes);
+ } else {
+ /*
+ * src buffer is not byte aligned, hence we have to copy each
+ * src byte to the src_buffer variable before extracting a byte
+ * to store in dst.
+ */
+ for (i = 0; i < nbytes; i++) {
+ src_buffer |= src[i] << bits_in_src_buffer;
+ dst[i] = src_buffer;
+ src_buffer >>= 8;
+ }
+ }
+ /* Update dst and src pointers */
+ dst += nbytes;
+ src += nbytes;
+
+ /*
+ * nbits is the number of remaining bits. It should not exceed 8 as
+ * we've already copied as much bytes as possible.
+ */
+ nbits %= 8;
+
+ /*
+ * If there's no more bits to copy to the destination and src buffer
+ * was already byte aligned, then we're done.
+ */
+ if (!nbits && !bits_in_src_buffer)
+ return;
+
+ /* Copy the remaining bits to src_buffer */
+ if (nbits)
+ src_buffer |= (*src & GENMASK(nbits - 1, 0)) <<
+ bits_in_src_buffer;
+ bits_in_src_buffer += nbits;
+
+ /*
+ * In case there were not enough bits to get a byte aligned dst buffer
+ * prepare the src_buffer variable to match the dst organization (shift
+ * src_buffer by dst_bit_off and retrieve the least significant bits
+ * from dst).
+ */
+ if (dst_bit_off)
+ src_buffer = (src_buffer << dst_bit_off) |
+ (*dst & GENMASK(dst_bit_off - 1, 0));
+ bits_in_src_buffer += dst_bit_off;
+
+ /*
+ * Keep most significant bits from dst if we end up with an unaligned
+ * number of bits.
+ */
+ nbytes = bits_in_src_buffer / 8;
+ if (bits_in_src_buffer % 8) {
+ src_buffer |= (dst[nbytes] &
+ GENMASK(7, bits_in_src_buffer % 8)) <<
+ (nbytes * 8);
+ nbytes++;
+ }
+
+ /* Copy the remaining bytes to dst */
+ for (i = 0; i < nbytes; i++) {
+ dst[i] = src_buffer;
+ src_buffer >>= 8;
+ }
+}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 959cb9b70310..4f3851a24bb2 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -791,6 +791,7 @@ static void gpmi_free_dma_buffer(struct gpmi_nand_data *this)
this->page_buffer_phys);
kfree(this->cmd_buffer);
kfree(this->data_buffer_dma);
+ kfree(this->raw_buffer);
this->cmd_buffer = NULL;
this->data_buffer_dma = NULL;
@@ -837,6 +838,9 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
if (!this->page_buffer_virt)
goto error_alloc;
+ this->raw_buffer = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
+ if (!this->raw_buffer)
+ goto error_alloc;
/* Slice up the page buffer. */
this->payload_virt = this->page_buffer_virt;
@@ -1347,6 +1351,199 @@ gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
return status & NAND_STATUS_FAIL ? -EIO : 0;
}
+/*
+ * This function reads a NAND page without involving the ECC engine (no HW
+ * ECC correction).
+ * The tricky part in the GPMI/BCH controller is that it stores ECC bits
+ * inline (interleaved with payload DATA), and do not align data chunk on
+ * byte boundaries.
+ * We thus need to take care moving the payload data and ECC bits stored in the
+ * page into the provided buffers, which is why we're using gpmi_copy_bits.
+ *
+ * See set_geometry_by_ecc_info inline comments to have a full description
+ * of the layout used by the GPMI controller.
+ */
+static int gpmi_ecc_read_page_raw(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf,
+ int oob_required, int page)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ int eccsize = nfc_geo->ecc_chunk_size;
+ int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len;
+ u8 *tmp_buf = this->raw_buffer;
+ size_t src_bit_off;
+ size_t oob_bit_off;
+ size_t oob_byte_off;
+ uint8_t *oob = chip->oob_poi;
+ int step;
+
+ chip->read_buf(mtd, tmp_buf,
+ mtd->writesize + mtd->oobsize);
+
+ /*
+ * If required, swap the bad block marker and the data stored in the
+ * metadata section, so that we don't wrongly consider a block as bad.
+ *
+ * See the layout description for a detailed explanation on why this
+ * is needed.
+ */
+ if (this->swap_block_mark) {
+ u8 swap = tmp_buf[0];
+
+ tmp_buf[0] = tmp_buf[mtd->writesize];
+ tmp_buf[mtd->writesize] = swap;
+ }
+
+ /*
+ * Copy the metadata section into the oob buffer (this section is
+ * guaranteed to be aligned on a byte boundary).
+ */
+ if (oob_required)
+ memcpy(oob, tmp_buf, nfc_geo->metadata_size);
+
+ oob_bit_off = nfc_geo->metadata_size * 8;
+ src_bit_off = oob_bit_off;
+
+ /* Extract interleaved payload data and ECC bits */
+ for (step = 0; step < nfc_geo->ecc_chunk_count; step++) {
+ if (buf)
+ gpmi_copy_bits(buf, step * eccsize * 8,
+ tmp_buf, src_bit_off,
+ eccsize * 8);
+ src_bit_off += eccsize * 8;
+
+ /* Align last ECC block to align a byte boundary */
+ if (step == nfc_geo->ecc_chunk_count - 1 &&
+ (oob_bit_off + eccbits) % 8)
+ eccbits += 8 - ((oob_bit_off + eccbits) % 8);
+
+ if (oob_required)
+ gpmi_copy_bits(oob, oob_bit_off,
+ tmp_buf, src_bit_off,
+ eccbits);
+
+ src_bit_off += eccbits;
+ oob_bit_off += eccbits;
+ }
+
+ if (oob_required) {
+ oob_byte_off = oob_bit_off / 8;
+
+ if (oob_byte_off < mtd->oobsize)
+ memcpy(oob + oob_byte_off,
+ tmp_buf + mtd->writesize + oob_byte_off,
+ mtd->oobsize - oob_byte_off);
+ }
+
+ return 0;
+}
+
+/*
+ * This function writes a NAND page without involving the ECC engine (no HW
+ * ECC generation).
+ * The tricky part in the GPMI/BCH controller is that it stores ECC bits
+ * inline (interleaved with payload DATA), and do not align data chunk on
+ * byte boundaries.
+ * We thus need to take care moving the OOB area at the right place in the
+ * final page, which is why we're using gpmi_copy_bits.
+ *
+ * See set_geometry_by_ecc_info inline comments to have a full description
+ * of the layout used by the GPMI controller.
+ */
+static int gpmi_ecc_write_page_raw(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf,
+ int oob_required)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ int eccsize = nfc_geo->ecc_chunk_size;
+ int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len;
+ u8 *tmp_buf = this->raw_buffer;
+ uint8_t *oob = chip->oob_poi;
+ size_t dst_bit_off;
+ size_t oob_bit_off;
+ size_t oob_byte_off;
+ int step;
+
+ /*
+ * Initialize all bits to 1 in case we don't have a buffer for the
+ * payload or oob data in order to leave unspecified bits of data
+ * to their initial state.
+ */
+ if (!buf || !oob_required)
+ memset(tmp_buf, 0xff, mtd->writesize + mtd->oobsize);
+
+ /*
+ * First copy the metadata section (stored in oob buffer) at the
+ * beginning of the page, as imposed by the GPMI layout.
+ */
+ memcpy(tmp_buf, oob, nfc_geo->metadata_size);
+ oob_bit_off = nfc_geo->metadata_size * 8;
+ dst_bit_off = oob_bit_off;
+
+ /* Interleave payload data and ECC bits */
+ for (step = 0; step < nfc_geo->ecc_chunk_count; step++) {
+ if (buf)
+ gpmi_copy_bits(tmp_buf, dst_bit_off,
+ buf, step * eccsize * 8, eccsize * 8);
+ dst_bit_off += eccsize * 8;
+
+ /* Align last ECC block to align a byte boundary */
+ if (step == nfc_geo->ecc_chunk_count - 1 &&
+ (oob_bit_off + eccbits) % 8)
+ eccbits += 8 - ((oob_bit_off + eccbits) % 8);
+
+ if (oob_required)
+ gpmi_copy_bits(tmp_buf, dst_bit_off,
+ oob, oob_bit_off, eccbits);
+
+ dst_bit_off += eccbits;
+ oob_bit_off += eccbits;
+ }
+
+ oob_byte_off = oob_bit_off / 8;
+
+ if (oob_required && oob_byte_off < mtd->oobsize)
+ memcpy(tmp_buf + mtd->writesize + oob_byte_off,
+ oob + oob_byte_off, mtd->oobsize - oob_byte_off);
+
+ /*
+ * If required, swap the bad block marker and the first byte of the
+ * metadata section, so that we don't modify the bad block marker.
+ *
+ * See the layout description for a detailed explanation on why this
+ * is needed.
+ */
+ if (this->swap_block_mark) {
+ u8 swap = tmp_buf[0];
+
+ tmp_buf[0] = tmp_buf[mtd->writesize];
+ tmp_buf[mtd->writesize] = swap;
+ }
+
+ chip->write_buf(mtd, tmp_buf, mtd->writesize + mtd->oobsize);
+
+ return 0;
+}
+
+static int gpmi_ecc_read_oob_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ return gpmi_ecc_read_page_raw(mtd, chip, NULL, 1, page);
+}
+
+static int gpmi_ecc_write_oob_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0, page);
+
+ return gpmi_ecc_write_page_raw(mtd, chip, NULL, 1);
+}
+
static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
struct nand_chip *chip = mtd->priv;
@@ -1664,6 +1861,10 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
ecc->write_page = gpmi_ecc_write_page;
ecc->read_oob = gpmi_ecc_read_oob;
ecc->write_oob = gpmi_ecc_write_oob;
+ ecc->read_page_raw = gpmi_ecc_read_page_raw;
+ ecc->write_page_raw = gpmi_ecc_write_page_raw;
+ ecc->read_oob_raw = gpmi_ecc_read_oob_raw;
+ ecc->write_oob_raw = gpmi_ecc_write_oob_raw;
ecc->mode = NAND_ECC_HW;
ecc->size = bch_geo->ecc_chunk_size;
ecc->strength = bch_geo->ecc_strength;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 32c6ba49f986..544062f65020 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -189,6 +189,8 @@ struct gpmi_nand_data {
void *auxiliary_virt;
dma_addr_t auxiliary_phys;
+ void *raw_buffer;
+
/* DMA channels */
#define DMA_CHANS 8
struct dma_chan *dma_chans[DMA_CHANS];
@@ -290,6 +292,10 @@ extern int gpmi_send_page(struct gpmi_nand_data *,
extern int gpmi_read_page(struct gpmi_nand_data *,
dma_addr_t payload, dma_addr_t auxiliary);
+void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
+ const u8 *src, size_t src_bit_off,
+ size_t nbits);
+
/* BCH : Status Block Completion Codes */
#define STATUS_GOOD 0x00
#define STATUS_ERASED 0xff
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index e1d56beeca79..a8f550fec35e 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -280,14 +280,10 @@ static void memcpy32_fromio(void *trg, const void __iomem *src, size_t size)
*t++ = __raw_readl(s++);
}
-static void memcpy32_toio(void __iomem *trg, const void *src, int size)
+static inline void memcpy32_toio(void __iomem *trg, const void *src, int size)
{
- int i;
- u32 __iomem *t = trg;
- const u32 *s = src;
-
- for (i = 0; i < (size >> 2); i++)
- __raw_writel(*s++, t++);
+ /* __iowrite32_copy use 32bit size values so divide by 4 */
+ __iowrite32_copy(trg, src, size / 4);
}
static int check_int_v3(struct mxc_nand_host *host)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 5b5c62712814..41585dfb206f 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -485,11 +485,11 @@ static int nand_check_wp(struct mtd_info *mtd)
}
/**
- * nand_block_checkbad - [GENERIC] Check if a block is marked bad
+ * nand_block_isreserved - [GENERIC] Check if a block is marked reserved.
* @mtd: MTD device structure
* @ofs: offset from device start
*
- * Check if the block is mark as reserved.
+ * Check if the block is marked as reserved.
*/
static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs)
{
@@ -720,7 +720,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
/*
* Program and erase have their own busy handlers status, sequential
- * in, and deplete1 need no delay.
+ * in and status need no delay.
*/
switch (command) {
@@ -3765,9 +3765,9 @@ ident_done:
pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
type->name);
- pr_info("%dMiB, %s, page size: %d, OOB size: %d\n",
+ pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n",
(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
- mtd->writesize, mtd->oobsize);
+ mtd->erasesize >> 10, mtd->writesize, mtd->oobsize);
return type;
}
@@ -4035,7 +4035,7 @@ int nand_scan_tail(struct mtd_info *mtd)
*/
if (!ecc->size && (mtd->oobsize >= 64)) {
ecc->size = 512;
- ecc->bytes = 7;
+ ecc->bytes = DIV_ROUND_UP(13 * ecc->strength, 8);
}
ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
&ecc->layout);
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index fbde89105245..dd620c19c619 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -178,6 +178,7 @@ struct nand_manufacturers nand_manuf_ids[] = {
{NAND_MFR_EON, "Eon"},
{NAND_MFR_SANDISK, "SanDisk"},
{NAND_MFR_INTEL, "Intel"},
+ {NAND_MFR_ATO, "ATO"},
{0x0, "Unknown"}
};
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 7dc1dd28d896..ab5bbf567439 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -87,10 +87,6 @@
#define CONFIG_NANDSIM_MAX_PARTS 32
#endif
-static uint first_id_byte = CONFIG_NANDSIM_FIRST_ID_BYTE;
-static uint second_id_byte = CONFIG_NANDSIM_SECOND_ID_BYTE;
-static uint third_id_byte = CONFIG_NANDSIM_THIRD_ID_BYTE;
-static uint fourth_id_byte = CONFIG_NANDSIM_FOURTH_ID_BYTE;
static uint access_delay = CONFIG_NANDSIM_ACCESS_DELAY;
static uint programm_delay = CONFIG_NANDSIM_PROGRAMM_DELAY;
static uint erase_delay = CONFIG_NANDSIM_ERASE_DELAY;
@@ -111,11 +107,19 @@ static unsigned int overridesize = 0;
static char *cache_file = NULL;
static unsigned int bbt;
static unsigned int bch;
+static u_char id_bytes[8] = {
+ [0] = CONFIG_NANDSIM_FIRST_ID_BYTE,
+ [1] = CONFIG_NANDSIM_SECOND_ID_BYTE,
+ [2] = CONFIG_NANDSIM_THIRD_ID_BYTE,
+ [3] = CONFIG_NANDSIM_FOURTH_ID_BYTE,
+ [4 ... 7] = 0xFF,
+};
-module_param(first_id_byte, uint, 0400);
-module_param(second_id_byte, uint, 0400);
-module_param(third_id_byte, uint, 0400);
-module_param(fourth_id_byte, uint, 0400);
+module_param_array(id_bytes, byte, NULL, 0400);
+module_param_named(first_id_byte, id_bytes[0], byte, 0400);
+module_param_named(second_id_byte, id_bytes[1], byte, 0400);
+module_param_named(third_id_byte, id_bytes[2], byte, 0400);
+module_param_named(fourth_id_byte, id_bytes[3], byte, 0400);
module_param(access_delay, uint, 0400);
module_param(programm_delay, uint, 0400);
module_param(erase_delay, uint, 0400);
@@ -136,10 +140,11 @@ module_param(cache_file, charp, 0400);
module_param(bbt, uint, 0400);
module_param(bch, uint, 0400);
-MODULE_PARM_DESC(first_id_byte, "The first byte returned by NAND Flash 'read ID' command (manufacturer ID)");
-MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID)");
-MODULE_PARM_DESC(third_id_byte, "The third byte returned by NAND Flash 'read ID' command");
-MODULE_PARM_DESC(fourth_id_byte, "The fourth byte returned by NAND Flash 'read ID' command");
+MODULE_PARM_DESC(id_bytes, "The ID bytes returned by NAND Flash 'read ID' command");
+MODULE_PARM_DESC(first_id_byte, "The first byte returned by NAND Flash 'read ID' command (manufacturer ID) (obsolete)");
+MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID) (obsolete)");
+MODULE_PARM_DESC(third_id_byte, "The third byte returned by NAND Flash 'read ID' command (obsolete)");
+MODULE_PARM_DESC(fourth_id_byte, "The fourth byte returned by NAND Flash 'read ID' command (obsolete)");
MODULE_PARM_DESC(access_delay, "Initial page access delay (microseconds)");
MODULE_PARM_DESC(programm_delay, "Page programm delay (microseconds");
MODULE_PARM_DESC(erase_delay, "Sector erase delay (milliseconds)");
@@ -304,7 +309,7 @@ struct nandsim {
unsigned int nbparts;
uint busw; /* flash chip bus width (8 or 16) */
- u_char ids[4]; /* chip's ID bytes */
+ u_char ids[8]; /* chip's ID bytes */
uint32_t options; /* chip's characteristic bits */
uint32_t state; /* current chip state */
uint32_t nxstate; /* next expected state */
@@ -2279,17 +2284,18 @@ static int __init ns_init_module(void)
* Perform minimum nandsim structure initialization to handle
* the initial ID read command correctly
*/
- if (third_id_byte != 0xFF || fourth_id_byte != 0xFF)
+ if (id_bytes[6] != 0xFF || id_bytes[7] != 0xFF)
+ nand->geom.idbytes = 8;
+ else if (id_bytes[4] != 0xFF || id_bytes[5] != 0xFF)
+ nand->geom.idbytes = 6;
+ else if (id_bytes[2] != 0xFF || id_bytes[3] != 0xFF)
nand->geom.idbytes = 4;
else
nand->geom.idbytes = 2;
nand->regs.status = NS_STATUS_OK(nand);
nand->nxstate = STATE_UNKNOWN;
nand->options |= OPT_PAGE512; /* temporary value */
- nand->ids[0] = first_id_byte;
- nand->ids[1] = second_id_byte;
- nand->ids[2] = third_id_byte;
- nand->ids[3] = fourth_id_byte;
+ memcpy(nand->ids, id_bytes, sizeof(nand->ids));
if (bus_width == 16) {
nand->busw = 16;
chip->options |= NAND_BUSWIDTH_16;
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 6d74b56dd9f6..63f858e6bf39 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -144,11 +144,13 @@ static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc,
0xac, 0x6b, 0xff, 0x99, 0x7b};
static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10};
-/* oob info generated runtime depending on ecc algorithm and layout selected */
-static struct nand_ecclayout omap_oobinfo;
+/* Shared among all NAND instances to synchronize access to the ECC Engine */
+static struct nand_hw_control omap_gpmc_controller = {
+ .lock = __SPIN_LOCK_UNLOCKED(omap_gpmc_controller.lock),
+ .wq = __WAIT_QUEUE_HEAD_INITIALIZER(omap_gpmc_controller.wq),
+};
struct omap_nand_info {
- struct nand_hw_control controller;
struct omap_nand_platform_data *pdata;
struct mtd_info mtd;
struct nand_chip nand;
@@ -168,6 +170,8 @@ struct omap_nand_info {
u_char *buf;
int buf_len;
struct gpmc_nand_regs reg;
+ /* generated at runtime depending on ECC algorithm and layout selected */
+ struct nand_ecclayout oobinfo;
/* fields specific for BCHx_HW ECC scheme */
struct device *elm_dev;
struct device_node *of_node;
@@ -1686,9 +1690,6 @@ static int omap_nand_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, info);
- spin_lock_init(&info->controller.lock);
- init_waitqueue_head(&info->controller.wq);
-
info->pdev = pdev;
info->gpmc_cs = pdata->cs;
info->reg = pdata->reg;
@@ -1708,7 +1709,7 @@ static int omap_nand_probe(struct platform_device *pdev)
info->phys_base = res->start;
- nand_chip->controller = &info->controller;
+ nand_chip->controller = &omap_gpmc_controller;
nand_chip->IO_ADDR_W = nand_chip->IO_ADDR_R;
nand_chip->cmd_ctrl = omap_hwcontrol;
@@ -1741,13 +1742,6 @@ static int omap_nand_probe(struct platform_device *pdev)
goto return_error;
}
- /* check for small page devices */
- if ((mtd->oobsize < 64) && (pdata->ecc_opt != OMAP_ECC_HAM1_CODE_HW)) {
- dev_err(&info->pdev->dev, "small page devices are not supported\n");
- err = -EINVAL;
- goto return_error;
- }
-
/* re-populate low-level callbacks based on xfer modes */
switch (pdata->xfer_type) {
case NAND_OMAP_PREFETCH_POLLED:
@@ -1840,7 +1834,7 @@ static int omap_nand_probe(struct platform_device *pdev)
}
/* populate MTD interface based on ECC scheme */
- ecclayout = &omap_oobinfo;
+ ecclayout = &info->oobinfo;
switch (info->ecc_opt) {
case OMAP_ECC_HAM1_CODE_SW:
nand_chip->ecc.mode = NAND_ECC_SOFT;
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index c53e36956bff..c3c6d305caa7 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -19,7 +19,7 @@
#include <linux/mtd/partitions.h>
#include <linux/clk.h>
#include <linux/err.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/sizes.h>
#include <linux/platform_data/mtd-orion_nand.h>
@@ -85,33 +85,24 @@ static int __init orion_nand_probe(struct platform_device *pdev)
int ret = 0;
u32 val = 0;
- nc = kzalloc(sizeof(struct nand_chip) + sizeof(struct mtd_info), GFP_KERNEL);
- if (!nc) {
- ret = -ENOMEM;
- goto no_res;
- }
+ nc = devm_kzalloc(&pdev->dev,
+ sizeof(struct nand_chip) + sizeof(struct mtd_info),
+ GFP_KERNEL);
+ if (!nc)
+ return -ENOMEM;
mtd = (struct mtd_info *)(nc + 1);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENODEV;
- goto no_res;
- }
+ io_base = devm_ioremap_resource(&pdev->dev, res);
- io_base = ioremap(res->start, resource_size(res));
- if (!io_base) {
- dev_err(&pdev->dev, "ioremap failed\n");
- ret = -EIO;
- goto no_res;
- }
+ if (IS_ERR(io_base))
+ return PTR_ERR(io_base);
if (pdev->dev.of_node) {
board = devm_kzalloc(&pdev->dev, sizeof(struct orion_nand_data),
GFP_KERNEL);
- if (!board) {
- ret = -ENOMEM;
- goto no_res;
- }
+ if (!board)
+ return -ENOMEM;
if (!of_property_read_u32(pdev->dev.of_node, "cle", &val))
board->cle = (u8)val;
else
@@ -185,9 +176,6 @@ no_dev:
clk_disable_unprepare(clk);
clk_put(clk);
}
- iounmap(io_base);
-no_res:
- kfree(nc);
return ret;
}
@@ -195,15 +183,10 @@ no_res:
static int orion_nand_remove(struct platform_device *pdev)
{
struct mtd_info *mtd = platform_get_drvdata(pdev);
- struct nand_chip *nc = mtd->priv;
struct clk *clk;
nand_release(mtd);
- iounmap(nc->IO_ADDR_W);
-
- kfree(nc);
-
clk = clk_get(&pdev->dev, NULL);
if (!IS_ERR(clk)) {
clk_disable_unprepare(clk);
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
new file mode 100644
index 000000000000..ccaa8e283388
--- /dev/null
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -0,0 +1,1432 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon.dev@gmail.com>
+ *
+ * Derived from:
+ * https://github.com/yuq/sunxi-nfc-mtd
+ * Copyright (C) 2013 Qiang Yu <yuq825@gmail.com>
+ *
+ * https://github.com/hno/Allwinner-Info
+ * Copyright (C) 2013 Henrik Nordström <Henrik Nordström>
+ *
+ * Copyright (C) 2013 Dmitriy B. <rzk333@gmail.com>
+ * Copyright (C) 2013 Sergey Lapin <slapin@ossfans.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_mtd.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#define NFC_REG_CTL 0x0000
+#define NFC_REG_ST 0x0004
+#define NFC_REG_INT 0x0008
+#define NFC_REG_TIMING_CTL 0x000C
+#define NFC_REG_TIMING_CFG 0x0010
+#define NFC_REG_ADDR_LOW 0x0014
+#define NFC_REG_ADDR_HIGH 0x0018
+#define NFC_REG_SECTOR_NUM 0x001C
+#define NFC_REG_CNT 0x0020
+#define NFC_REG_CMD 0x0024
+#define NFC_REG_RCMD_SET 0x0028
+#define NFC_REG_WCMD_SET 0x002C
+#define NFC_REG_IO_DATA 0x0030
+#define NFC_REG_ECC_CTL 0x0034
+#define NFC_REG_ECC_ST 0x0038
+#define NFC_REG_DEBUG 0x003C
+#define NFC_REG_ECC_CNT0 0x0040
+#define NFC_REG_ECC_CNT1 0x0044
+#define NFC_REG_ECC_CNT2 0x0048
+#define NFC_REG_ECC_CNT3 0x004c
+#define NFC_REG_USER_DATA_BASE 0x0050
+#define NFC_REG_SPARE_AREA 0x00A0
+#define NFC_RAM0_BASE 0x0400
+#define NFC_RAM1_BASE 0x0800
+
+/* define bit use in NFC_CTL */
+#define NFC_EN BIT(0)
+#define NFC_RESET BIT(1)
+#define NFC_BUS_WIDYH BIT(2)
+#define NFC_RB_SEL BIT(3)
+#define NFC_CE_SEL GENMASK(26, 24)
+#define NFC_CE_CTL BIT(6)
+#define NFC_CE_CTL1 BIT(7)
+#define NFC_PAGE_SIZE GENMASK(11, 8)
+#define NFC_SAM BIT(12)
+#define NFC_RAM_METHOD BIT(14)
+#define NFC_DEBUG_CTL BIT(31)
+
+/* define bit use in NFC_ST */
+#define NFC_RB_B2R BIT(0)
+#define NFC_CMD_INT_FLAG BIT(1)
+#define NFC_DMA_INT_FLAG BIT(2)
+#define NFC_CMD_FIFO_STATUS BIT(3)
+#define NFC_STA BIT(4)
+#define NFC_NATCH_INT_FLAG BIT(5)
+#define NFC_RB_STATE0 BIT(8)
+#define NFC_RB_STATE1 BIT(9)
+#define NFC_RB_STATE2 BIT(10)
+#define NFC_RB_STATE3 BIT(11)
+
+/* define bit use in NFC_INT */
+#define NFC_B2R_INT_ENABLE BIT(0)
+#define NFC_CMD_INT_ENABLE BIT(1)
+#define NFC_DMA_INT_ENABLE BIT(2)
+#define NFC_INT_MASK (NFC_B2R_INT_ENABLE | \
+ NFC_CMD_INT_ENABLE | \
+ NFC_DMA_INT_ENABLE)
+
+/* define bit use in NFC_CMD */
+#define NFC_CMD_LOW_BYTE GENMASK(7, 0)
+#define NFC_CMD_HIGH_BYTE GENMASK(15, 8)
+#define NFC_ADR_NUM GENMASK(18, 16)
+#define NFC_SEND_ADR BIT(19)
+#define NFC_ACCESS_DIR BIT(20)
+#define NFC_DATA_TRANS BIT(21)
+#define NFC_SEND_CMD1 BIT(22)
+#define NFC_WAIT_FLAG BIT(23)
+#define NFC_SEND_CMD2 BIT(24)
+#define NFC_SEQ BIT(25)
+#define NFC_DATA_SWAP_METHOD BIT(26)
+#define NFC_ROW_AUTO_INC BIT(27)
+#define NFC_SEND_CMD3 BIT(28)
+#define NFC_SEND_CMD4 BIT(29)
+#define NFC_CMD_TYPE GENMASK(31, 30)
+
+/* define bit use in NFC_RCMD_SET */
+#define NFC_READ_CMD GENMASK(7, 0)
+#define NFC_RANDOM_READ_CMD0 GENMASK(15, 8)
+#define NFC_RANDOM_READ_CMD1 GENMASK(23, 16)
+
+/* define bit use in NFC_WCMD_SET */
+#define NFC_PROGRAM_CMD GENMASK(7, 0)
+#define NFC_RANDOM_WRITE_CMD GENMASK(15, 8)
+#define NFC_READ_CMD0 GENMASK(23, 16)
+#define NFC_READ_CMD1 GENMASK(31, 24)
+
+/* define bit use in NFC_ECC_CTL */
+#define NFC_ECC_EN BIT(0)
+#define NFC_ECC_PIPELINE BIT(3)
+#define NFC_ECC_EXCEPTION BIT(4)
+#define NFC_ECC_BLOCK_SIZE BIT(5)
+#define NFC_RANDOM_EN BIT(9)
+#define NFC_RANDOM_DIRECTION BIT(10)
+#define NFC_ECC_MODE_SHIFT 12
+#define NFC_ECC_MODE GENMASK(15, 12)
+#define NFC_RANDOM_SEED GENMASK(30, 16)
+
+#define NFC_DEFAULT_TIMEOUT_MS 1000
+
+#define NFC_SRAM_SIZE 1024
+
+#define NFC_MAX_CS 7
+
+/*
+ * Ready/Busy detection type: describes the Ready/Busy detection modes
+ *
+ * @RB_NONE: no external detection available, rely on STATUS command
+ * and software timeouts
+ * @RB_NATIVE: use sunxi NAND controller Ready/Busy support. The Ready/Busy
+ * pin of the NAND flash chip must be connected to one of the
+ * native NAND R/B pins (those which can be muxed to the NAND
+ * Controller)
+ * @RB_GPIO: use a simple GPIO to handle Ready/Busy status. The Ready/Busy
+ * pin of the NAND flash chip must be connected to a GPIO capable
+ * pin.
+ */
+enum sunxi_nand_rb_type {
+ RB_NONE,
+ RB_NATIVE,
+ RB_GPIO,
+};
+
+/*
+ * Ready/Busy structure: stores information related to Ready/Busy detection
+ *
+ * @type: the Ready/Busy detection mode
+ * @info: information related to the R/B detection mode. Either a gpio
+ * id or a native R/B id (those supported by the NAND controller).
+ */
+struct sunxi_nand_rb {
+ enum sunxi_nand_rb_type type;
+ union {
+ int gpio;
+ int nativeid;
+ } info;
+};
+
+/*
+ * Chip Select structure: stores information related to NAND Chip Select
+ *
+ * @cs: the NAND CS id used to communicate with a NAND Chip
+ * @rb: the Ready/Busy description
+ */
+struct sunxi_nand_chip_sel {
+ u8 cs;
+ struct sunxi_nand_rb rb;
+};
+
+/*
+ * sunxi HW ECC infos: stores information related to HW ECC support
+ *
+ * @mode: the sunxi ECC mode field deduced from ECC requirements
+ * @layout: the OOB layout depending on the ECC requirements and the
+ * selected ECC mode
+ */
+struct sunxi_nand_hw_ecc {
+ int mode;
+ struct nand_ecclayout layout;
+};
+
+/*
+ * NAND chip structure: stores NAND chip device related information
+ *
+ * @node: used to store NAND chips into a list
+ * @nand: base NAND chip structure
+ * @mtd: base MTD structure
+ * @clk_rate: clk_rate required for this NAND chip
+ * @selected: current active CS
+ * @nsels: number of CS lines required by the NAND chip
+ * @sels: array of CS lines descriptions
+ */
+struct sunxi_nand_chip {
+ struct list_head node;
+ struct nand_chip nand;
+ struct mtd_info mtd;
+ unsigned long clk_rate;
+ int selected;
+ int nsels;
+ struct sunxi_nand_chip_sel sels[0];
+};
+
+static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand)
+{
+ return container_of(nand, struct sunxi_nand_chip, nand);
+}
+
+/*
+ * NAND Controller structure: stores sunxi NAND controller information
+ *
+ * @controller: base controller structure
+ * @dev: parent device (used to print error messages)
+ * @regs: NAND controller registers
+ * @ahb_clk: NAND Controller AHB clock
+ * @mod_clk: NAND Controller mod clock
+ * @assigned_cs: bitmask describing already assigned CS lines
+ * @clk_rate: NAND controller current clock rate
+ * @chips: a list containing all the NAND chips attached to
+ * this NAND controller
+ * @complete: a completion object used to wait for NAND
+ * controller events
+ */
+struct sunxi_nfc {
+ struct nand_hw_control controller;
+ struct device *dev;
+ void __iomem *regs;
+ struct clk *ahb_clk;
+ struct clk *mod_clk;
+ unsigned long assigned_cs;
+ unsigned long clk_rate;
+ struct list_head chips;
+ struct completion complete;
+};
+
+static inline struct sunxi_nfc *to_sunxi_nfc(struct nand_hw_control *ctrl)
+{
+ return container_of(ctrl, struct sunxi_nfc, controller);
+}
+
+static irqreturn_t sunxi_nfc_interrupt(int irq, void *dev_id)
+{
+ struct sunxi_nfc *nfc = dev_id;
+ u32 st = readl(nfc->regs + NFC_REG_ST);
+ u32 ien = readl(nfc->regs + NFC_REG_INT);
+
+ if (!(ien & st))
+ return IRQ_NONE;
+
+ if ((ien & st) == ien)
+ complete(&nfc->complete);
+
+ writel(st & NFC_INT_MASK, nfc->regs + NFC_REG_ST);
+ writel(~st & ien & NFC_INT_MASK, nfc->regs + NFC_REG_INT);
+
+ return IRQ_HANDLED;
+}
+
+static int sunxi_nfc_wait_int(struct sunxi_nfc *nfc, u32 flags,
+ unsigned int timeout_ms)
+{
+ init_completion(&nfc->complete);
+
+ writel(flags, nfc->regs + NFC_REG_INT);
+
+ if (!timeout_ms)
+ timeout_ms = NFC_DEFAULT_TIMEOUT_MS;
+
+ if (!wait_for_completion_timeout(&nfc->complete,
+ msecs_to_jiffies(timeout_ms))) {
+ dev_err(nfc->dev, "wait interrupt timedout\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int sunxi_nfc_wait_cmd_fifo_empty(struct sunxi_nfc *nfc)
+{
+ unsigned long timeout = jiffies +
+ msecs_to_jiffies(NFC_DEFAULT_TIMEOUT_MS);
+
+ do {
+ if (!(readl(nfc->regs + NFC_REG_ST) & NFC_CMD_FIFO_STATUS))
+ return 0;
+ } while (time_before(jiffies, timeout));
+
+ dev_err(nfc->dev, "wait for empty cmd FIFO timedout\n");
+ return -ETIMEDOUT;
+}
+
+static int sunxi_nfc_rst(struct sunxi_nfc *nfc)
+{
+ unsigned long timeout = jiffies +
+ msecs_to_jiffies(NFC_DEFAULT_TIMEOUT_MS);
+
+ writel(0, nfc->regs + NFC_REG_ECC_CTL);
+ writel(NFC_RESET, nfc->regs + NFC_REG_CTL);
+
+ do {
+ if (!(readl(nfc->regs + NFC_REG_CTL) & NFC_RESET))
+ return 0;
+ } while (time_before(jiffies, timeout));
+
+ dev_err(nfc->dev, "wait for NAND controller reset timedout\n");
+ return -ETIMEDOUT;
+}
+
+static int sunxi_nfc_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+ struct sunxi_nand_rb *rb;
+ unsigned long timeo = (sunxi_nand->nand.state == FL_ERASING ? 400 : 20);
+ int ret;
+
+ if (sunxi_nand->selected < 0)
+ return 0;
+
+ rb = &sunxi_nand->sels[sunxi_nand->selected].rb;
+
+ switch (rb->type) {
+ case RB_NATIVE:
+ ret = !!(readl(nfc->regs + NFC_REG_ST) &
+ (NFC_RB_STATE0 << rb->info.nativeid));
+ if (ret)
+ break;
+
+ sunxi_nfc_wait_int(nfc, NFC_RB_B2R, timeo);
+ ret = !!(readl(nfc->regs + NFC_REG_ST) &
+ (NFC_RB_STATE0 << rb->info.nativeid));
+ break;
+ case RB_GPIO:
+ ret = gpio_get_value(rb->info.gpio);
+ break;
+ case RB_NONE:
+ default:
+ ret = 0;
+ dev_err(nfc->dev, "cannot check R/B NAND status!\n");
+ break;
+ }
+
+ return ret;
+}
+
+static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+ struct sunxi_nand_chip_sel *sel;
+ u32 ctl;
+
+ if (chip > 0 && chip >= sunxi_nand->nsels)
+ return;
+
+ if (chip == sunxi_nand->selected)
+ return;
+
+ ctl = readl(nfc->regs + NFC_REG_CTL) &
+ ~(NFC_CE_SEL | NFC_RB_SEL | NFC_EN);
+
+ if (chip >= 0) {
+ sel = &sunxi_nand->sels[chip];
+
+ ctl |= (sel->cs << 24) | NFC_EN |
+ (((nand->page_shift - 10) & 0xf) << 8);
+ if (sel->rb.type == RB_NONE) {
+ nand->dev_ready = NULL;
+ } else {
+ nand->dev_ready = sunxi_nfc_dev_ready;
+ if (sel->rb.type == RB_NATIVE)
+ ctl |= (sel->rb.info.nativeid << 3);
+ }
+
+ writel(mtd->writesize, nfc->regs + NFC_REG_SPARE_AREA);
+
+ if (nfc->clk_rate != sunxi_nand->clk_rate) {
+ clk_set_rate(nfc->mod_clk, sunxi_nand->clk_rate);
+ nfc->clk_rate = sunxi_nand->clk_rate;
+ }
+ }
+
+ writel(ctl, nfc->regs + NFC_REG_CTL);
+
+ sunxi_nand->selected = chip;
+}
+
+static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+ int ret;
+ int cnt;
+ int offs = 0;
+ u32 tmp;
+
+ while (len > offs) {
+ cnt = min(len - offs, NFC_SRAM_SIZE);
+
+ ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
+ if (ret)
+ break;
+
+ writel(cnt, nfc->regs + NFC_REG_CNT);
+ tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD;
+ writel(tmp, nfc->regs + NFC_REG_CMD);
+
+ ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ if (ret)
+ break;
+
+ if (buf)
+ memcpy_fromio(buf + offs, nfc->regs + NFC_RAM0_BASE,
+ cnt);
+ offs += cnt;
+ }
+}
+
+static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
+ int len)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+ int ret;
+ int cnt;
+ int offs = 0;
+ u32 tmp;
+
+ while (len > offs) {
+ cnt = min(len - offs, NFC_SRAM_SIZE);
+
+ ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
+ if (ret)
+ break;
+
+ writel(cnt, nfc->regs + NFC_REG_CNT);
+ memcpy_toio(nfc->regs + NFC_RAM0_BASE, buf + offs, cnt);
+ tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD |
+ NFC_ACCESS_DIR;
+ writel(tmp, nfc->regs + NFC_REG_CMD);
+
+ ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ if (ret)
+ break;
+
+ offs += cnt;
+ }
+}
+
+static uint8_t sunxi_nfc_read_byte(struct mtd_info *mtd)
+{
+ uint8_t ret;
+
+ sunxi_nfc_read_buf(mtd, &ret, 1);
+
+ return ret;
+}
+
+static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat,
+ unsigned int ctrl)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+ int ret;
+ u32 tmp;
+
+ ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
+ if (ret)
+ return;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ tmp = readl(nfc->regs + NFC_REG_CTL);
+ if (ctrl & NAND_NCE)
+ tmp |= NFC_CE_CTL;
+ else
+ tmp &= ~NFC_CE_CTL;
+ writel(tmp, nfc->regs + NFC_REG_CTL);
+ }
+
+ if (dat == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE) {
+ writel(NFC_SEND_CMD1 | dat, nfc->regs + NFC_REG_CMD);
+ } else {
+ writel(dat, nfc->regs + NFC_REG_ADDR_LOW);
+ writel(NFC_SEND_ADR, nfc->regs + NFC_REG_CMD);
+ }
+
+ sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+}
+
+static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf,
+ int oob_required, int page)
+{
+ struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ struct nand_ecclayout *layout = ecc->layout;
+ struct sunxi_nand_hw_ecc *data = ecc->priv;
+ unsigned int max_bitflips = 0;
+ int offset;
+ int ret;
+ u32 tmp;
+ int i;
+ int cnt;
+
+ tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
+ tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE);
+ tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) |
+ NFC_ECC_EXCEPTION;
+
+ writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
+
+ for (i = 0; i < ecc->steps; i++) {
+ if (i)
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, i * ecc->size, -1);
+
+ offset = mtd->writesize + layout->eccpos[i * ecc->bytes] - 4;
+
+ chip->read_buf(mtd, NULL, ecc->size);
+
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
+
+ ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
+ if (ret)
+ return ret;
+
+ tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | (1 << 30);
+ writel(tmp, nfc->regs + NFC_REG_CMD);
+
+ ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ if (ret)
+ return ret;
+
+ memcpy_fromio(buf + (i * ecc->size),
+ nfc->regs + NFC_RAM0_BASE, ecc->size);
+
+ if (readl(nfc->regs + NFC_REG_ECC_ST) & 0x1) {
+ mtd->ecc_stats.failed++;
+ } else {
+ tmp = readl(nfc->regs + NFC_REG_ECC_CNT0) & 0xff;
+ mtd->ecc_stats.corrected += tmp;
+ max_bitflips = max_t(unsigned int, max_bitflips, tmp);
+ }
+
+ if (oob_required) {
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
+
+ ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
+ if (ret)
+ return ret;
+
+ offset -= mtd->writesize;
+ chip->read_buf(mtd, chip->oob_poi + offset,
+ ecc->bytes + 4);
+ }
+ }
+
+ if (oob_required) {
+ cnt = ecc->layout->oobfree[ecc->steps].length;
+ if (cnt > 0) {
+ offset = mtd->writesize +
+ ecc->layout->oobfree[ecc->steps].offset;
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
+ offset -= mtd->writesize;
+ chip->read_buf(mtd, chip->oob_poi + offset, cnt);
+ }
+ }
+
+ tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
+ tmp &= ~NFC_ECC_EN;
+
+ writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
+
+ return max_bitflips;
+}
+
+static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
+{
+ struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ struct nand_ecclayout *layout = ecc->layout;
+ struct sunxi_nand_hw_ecc *data = ecc->priv;
+ int offset;
+ int ret;
+ u32 tmp;
+ int i;
+ int cnt;
+
+ tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
+ tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE);
+ tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) |
+ NFC_ECC_EXCEPTION;
+
+ writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
+
+ for (i = 0; i < ecc->steps; i++) {
+ if (i)
+ chip->cmdfunc(mtd, NAND_CMD_RNDIN, i * ecc->size, -1);
+
+ chip->write_buf(mtd, buf + (i * ecc->size), ecc->size);
+
+ offset = layout->eccpos[i * ecc->bytes] - 4 + mtd->writesize;
+
+ /* Fill OOB data in */
+ if (oob_required) {
+ tmp = 0xffffffff;
+ memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp,
+ 4);
+ } else {
+ memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE,
+ chip->oob_poi + offset - mtd->writesize,
+ 4);
+ }
+
+ chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1);
+
+ ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
+ if (ret)
+ return ret;
+
+ tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR |
+ (1 << 30);
+ writel(tmp, nfc->regs + NFC_REG_CMD);
+ ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ if (ret)
+ return ret;
+ }
+
+ if (oob_required) {
+ cnt = ecc->layout->oobfree[i].length;
+ if (cnt > 0) {
+ offset = mtd->writesize +
+ ecc->layout->oobfree[i].offset;
+ chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1);
+ offset -= mtd->writesize;
+ chip->write_buf(mtd, chip->oob_poi + offset, cnt);
+ }
+ }
+
+ tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
+ tmp &= ~NFC_ECC_EN;
+
+ writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
+
+ return 0;
+}
+
+static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf, int oob_required,
+ int page)
+{
+ struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ struct sunxi_nand_hw_ecc *data = ecc->priv;
+ unsigned int max_bitflips = 0;
+ uint8_t *oob = chip->oob_poi;
+ int offset = 0;
+ int ret;
+ int cnt;
+ u32 tmp;
+ int i;
+
+ tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
+ tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE);
+ tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) |
+ NFC_ECC_EXCEPTION;
+
+ writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
+
+ for (i = 0; i < ecc->steps; i++) {
+ chip->read_buf(mtd, NULL, ecc->size);
+
+ tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | (1 << 30);
+ writel(tmp, nfc->regs + NFC_REG_CMD);
+
+ ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ if (ret)
+ return ret;
+
+ memcpy_fromio(buf, nfc->regs + NFC_RAM0_BASE, ecc->size);
+ buf += ecc->size;
+ offset += ecc->size;
+
+ if (readl(nfc->regs + NFC_REG_ECC_ST) & 0x1) {
+ mtd->ecc_stats.failed++;
+ } else {
+ tmp = readl(nfc->regs + NFC_REG_ECC_CNT0) & 0xff;
+ mtd->ecc_stats.corrected += tmp;
+ max_bitflips = max_t(unsigned int, max_bitflips, tmp);
+ }
+
+ if (oob_required) {
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
+ chip->read_buf(mtd, oob, ecc->bytes + ecc->prepad);
+ oob += ecc->bytes + ecc->prepad;
+ }
+
+ offset += ecc->bytes + ecc->prepad;
+ }
+
+ if (oob_required) {
+ cnt = mtd->oobsize - (oob - chip->oob_poi);
+ if (cnt > 0) {
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
+ chip->read_buf(mtd, oob, cnt);
+ }
+ }
+
+ writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_ECC_EN,
+ nfc->regs + NFC_REG_ECC_CTL);
+
+ return max_bitflips;
+}
+
+static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf,
+ int oob_required)
+{
+ struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ struct sunxi_nand_hw_ecc *data = ecc->priv;
+ uint8_t *oob = chip->oob_poi;
+ int offset = 0;
+ int ret;
+ int cnt;
+ u32 tmp;
+ int i;
+
+ tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
+ tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE);
+ tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) |
+ NFC_ECC_EXCEPTION;
+
+ writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
+
+ for (i = 0; i < ecc->steps; i++) {
+ chip->write_buf(mtd, buf + (i * ecc->size), ecc->size);
+ offset += ecc->size;
+
+ /* Fill OOB data in */
+ if (oob_required) {
+ tmp = 0xffffffff;
+ memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp,
+ 4);
+ } else {
+ memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob,
+ 4);
+ }
+
+ tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR |
+ (1 << 30);
+ writel(tmp, nfc->regs + NFC_REG_CMD);
+
+ ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ if (ret)
+ return ret;
+
+ offset += ecc->bytes + ecc->prepad;
+ oob += ecc->bytes + ecc->prepad;
+ }
+
+ if (oob_required) {
+ cnt = mtd->oobsize - (oob - chip->oob_poi);
+ if (cnt > 0) {
+ chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1);
+ chip->write_buf(mtd, oob, cnt);
+ }
+ }
+
+ tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
+ tmp &= ~NFC_ECC_EN;
+
+ writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
+
+ return 0;
+}
+
+static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
+ const struct nand_sdr_timings *timings)
+{
+ u32 min_clk_period = 0;
+
+ /* T1 <=> tCLS */
+ if (timings->tCLS_min > min_clk_period)
+ min_clk_period = timings->tCLS_min;
+
+ /* T2 <=> tCLH */
+ if (timings->tCLH_min > min_clk_period)
+ min_clk_period = timings->tCLH_min;
+
+ /* T3 <=> tCS */
+ if (timings->tCS_min > min_clk_period)
+ min_clk_period = timings->tCS_min;
+
+ /* T4 <=> tCH */
+ if (timings->tCH_min > min_clk_period)
+ min_clk_period = timings->tCH_min;
+
+ /* T5 <=> tWP */
+ if (timings->tWP_min > min_clk_period)
+ min_clk_period = timings->tWP_min;
+
+ /* T6 <=> tWH */
+ if (timings->tWH_min > min_clk_period)
+ min_clk_period = timings->tWH_min;
+
+ /* T7 <=> tALS */
+ if (timings->tALS_min > min_clk_period)
+ min_clk_period = timings->tALS_min;
+
+ /* T8 <=> tDS */
+ if (timings->tDS_min > min_clk_period)
+ min_clk_period = timings->tDS_min;
+
+ /* T9 <=> tDH */
+ if (timings->tDH_min > min_clk_period)
+ min_clk_period = timings->tDH_min;
+
+ /* T10 <=> tRR */
+ if (timings->tRR_min > (min_clk_period * 3))
+ min_clk_period = DIV_ROUND_UP(timings->tRR_min, 3);
+
+ /* T11 <=> tALH */
+ if (timings->tALH_min > min_clk_period)
+ min_clk_period = timings->tALH_min;
+
+ /* T12 <=> tRP */
+ if (timings->tRP_min > min_clk_period)
+ min_clk_period = timings->tRP_min;
+
+ /* T13 <=> tREH */
+ if (timings->tREH_min > min_clk_period)
+ min_clk_period = timings->tREH_min;
+
+ /* T14 <=> tRC */
+ if (timings->tRC_min > (min_clk_period * 2))
+ min_clk_period = DIV_ROUND_UP(timings->tRC_min, 2);
+
+ /* T15 <=> tWC */
+ if (timings->tWC_min > (min_clk_period * 2))
+ min_clk_period = DIV_ROUND_UP(timings->tWC_min, 2);
+
+
+ /* Convert min_clk_period from picoseconds to nanoseconds */
+ min_clk_period = DIV_ROUND_UP(min_clk_period, 1000);
+
+ /*
+ * Convert min_clk_period into a clk frequency, then get the
+ * appropriate rate for the NAND controller IP given this formula
+ * (specified in the datasheet):
+ * nand clk_rate = 2 * min_clk_rate
+ */
+ chip->clk_rate = (2 * NSEC_PER_SEC) / min_clk_period;
+
+ /* TODO: configure T16-T19 */
+
+ return 0;
+}
+
+static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip,
+ struct device_node *np)
+{
+ const struct nand_sdr_timings *timings;
+ int ret;
+ int mode;
+
+ mode = onfi_get_async_timing_mode(&chip->nand);
+ if (mode == ONFI_TIMING_MODE_UNKNOWN) {
+ mode = chip->nand.onfi_timing_mode_default;
+ } else {
+ uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {};
+
+ mode = fls(mode) - 1;
+ if (mode < 0)
+ mode = 0;
+
+ feature[0] = mode;
+ ret = chip->nand.onfi_set_features(&chip->mtd, &chip->nand,
+ ONFI_FEATURE_ADDR_TIMING_MODE,
+ feature);
+ if (ret)
+ return ret;
+ }
+
+ timings = onfi_async_timing_mode_to_sdr_timings(mode);
+ if (IS_ERR(timings))
+ return PTR_ERR(timings);
+
+ return sunxi_nand_chip_set_timings(chip, timings);
+}
+
+static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
+ struct nand_ecc_ctrl *ecc,
+ struct device_node *np)
+{
+ static const u8 strengths[] = { 16, 24, 28, 32, 40, 48, 56, 60, 64 };
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+ struct sunxi_nand_hw_ecc *data;
+ struct nand_ecclayout *layout;
+ int nsectors;
+ int ret;
+ int i;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ /* Add ECC info retrieval from DT */
+ for (i = 0; i < ARRAY_SIZE(strengths); i++) {
+ if (ecc->strength <= strengths[i])
+ break;
+ }
+
+ if (i >= ARRAY_SIZE(strengths)) {
+ dev_err(nfc->dev, "unsupported strength\n");
+ ret = -ENOTSUPP;
+ goto err;
+ }
+
+ data->mode = i;
+
+ /* HW ECC always request ECC bytes for 1024 bytes blocks */
+ ecc->bytes = DIV_ROUND_UP(ecc->strength * fls(8 * 1024), 8);
+
+ /* HW ECC always work with even numbers of ECC bytes */
+ ecc->bytes = ALIGN(ecc->bytes, 2);
+
+ layout = &data->layout;
+ nsectors = mtd->writesize / ecc->size;
+
+ if (mtd->oobsize < ((ecc->bytes + 4) * nsectors)) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ layout->eccbytes = (ecc->bytes * nsectors);
+
+ ecc->layout = layout;
+ ecc->priv = data;
+
+ return 0;
+
+err:
+ kfree(data);
+
+ return ret;
+}
+
+static void sunxi_nand_hw_common_ecc_ctrl_cleanup(struct nand_ecc_ctrl *ecc)
+{
+ kfree(ecc->priv);
+}
+
+static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd,
+ struct nand_ecc_ctrl *ecc,
+ struct device_node *np)
+{
+ struct nand_ecclayout *layout;
+ int nsectors;
+ int i, j;
+ int ret;
+
+ ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np);
+ if (ret)
+ return ret;
+
+ ecc->read_page = sunxi_nfc_hw_ecc_read_page;
+ ecc->write_page = sunxi_nfc_hw_ecc_write_page;
+ layout = ecc->layout;
+ nsectors = mtd->writesize / ecc->size;
+
+ for (i = 0; i < nsectors; i++) {
+ if (i) {
+ layout->oobfree[i].offset =
+ layout->oobfree[i - 1].offset +
+ layout->oobfree[i - 1].length +
+ ecc->bytes;
+ layout->oobfree[i].length = 4;
+ } else {
+ /*
+ * The first 2 bytes are used for BB markers, hence we
+ * only have 2 bytes available in the first user data
+ * section.
+ */
+ layout->oobfree[i].length = 2;
+ layout->oobfree[i].offset = 2;
+ }
+
+ for (j = 0; j < ecc->bytes; j++)
+ layout->eccpos[(ecc->bytes * i) + j] =
+ layout->oobfree[i].offset +
+ layout->oobfree[i].length + j;
+ }
+
+ if (mtd->oobsize > (ecc->bytes + 4) * nsectors) {
+ layout->oobfree[nsectors].offset =
+ layout->oobfree[nsectors - 1].offset +
+ layout->oobfree[nsectors - 1].length +
+ ecc->bytes;
+ layout->oobfree[nsectors].length = mtd->oobsize -
+ ((ecc->bytes + 4) * nsectors);
+ }
+
+ return 0;
+}
+
+static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd,
+ struct nand_ecc_ctrl *ecc,
+ struct device_node *np)
+{
+ struct nand_ecclayout *layout;
+ int nsectors;
+ int i;
+ int ret;
+
+ ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np);
+ if (ret)
+ return ret;
+
+ ecc->prepad = 4;
+ ecc->read_page = sunxi_nfc_hw_syndrome_ecc_read_page;
+ ecc->write_page = sunxi_nfc_hw_syndrome_ecc_write_page;
+
+ layout = ecc->layout;
+ nsectors = mtd->writesize / ecc->size;
+
+ for (i = 0; i < (ecc->bytes * nsectors); i++)
+ layout->eccpos[i] = i;
+
+ layout->oobfree[0].length = mtd->oobsize - i;
+ layout->oobfree[0].offset = i;
+
+ return 0;
+}
+
+static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
+{
+ switch (ecc->mode) {
+ case NAND_ECC_HW:
+ case NAND_ECC_HW_SYNDROME:
+ sunxi_nand_hw_common_ecc_ctrl_cleanup(ecc);
+ break;
+ case NAND_ECC_NONE:
+ kfree(ecc->layout);
+ default:
+ break;
+ }
+}
+
+static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
+ struct device_node *np)
+{
+ struct nand_chip *nand = mtd->priv;
+ int strength;
+ int blk_size;
+ int ret;
+
+ blk_size = of_get_nand_ecc_step_size(np);
+ strength = of_get_nand_ecc_strength(np);
+ if (blk_size > 0 && strength > 0) {
+ ecc->size = blk_size;
+ ecc->strength = strength;
+ } else {
+ ecc->size = nand->ecc_step_ds;
+ ecc->strength = nand->ecc_strength_ds;
+ }
+
+ if (!ecc->size || !ecc->strength)
+ return -EINVAL;
+
+ ecc->mode = NAND_ECC_HW;
+
+ ret = of_get_nand_ecc_mode(np);
+ if (ret >= 0)
+ ecc->mode = ret;
+
+ switch (ecc->mode) {
+ case NAND_ECC_SOFT_BCH:
+ ecc->bytes = DIV_ROUND_UP(ecc->strength * fls(8 * ecc->size),
+ 8);
+ break;
+ case NAND_ECC_HW:
+ ret = sunxi_nand_hw_ecc_ctrl_init(mtd, ecc, np);
+ if (ret)
+ return ret;
+ break;
+ case NAND_ECC_HW_SYNDROME:
+ ret = sunxi_nand_hw_syndrome_ecc_ctrl_init(mtd, ecc, np);
+ if (ret)
+ return ret;
+ break;
+ case NAND_ECC_NONE:
+ ecc->layout = kzalloc(sizeof(*ecc->layout), GFP_KERNEL);
+ if (!ecc->layout)
+ return -ENOMEM;
+ ecc->layout->oobfree[0].length = mtd->oobsize;
+ case NAND_ECC_SOFT:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
+ struct device_node *np)
+{
+ const struct nand_sdr_timings *timings;
+ struct sunxi_nand_chip *chip;
+ struct mtd_part_parser_data ppdata;
+ struct mtd_info *mtd;
+ struct nand_chip *nand;
+ int nsels;
+ int ret;
+ int i;
+ u32 tmp;
+
+ if (!of_get_property(np, "reg", &nsels))
+ return -EINVAL;
+
+ nsels /= sizeof(u32);
+ if (!nsels) {
+ dev_err(dev, "invalid reg property size\n");
+ return -EINVAL;
+ }
+
+ chip = devm_kzalloc(dev,
+ sizeof(*chip) +
+ (nsels * sizeof(struct sunxi_nand_chip_sel)),
+ GFP_KERNEL);
+ if (!chip) {
+ dev_err(dev, "could not allocate chip\n");
+ return -ENOMEM;
+ }
+
+ chip->nsels = nsels;
+ chip->selected = -1;
+
+ for (i = 0; i < nsels; i++) {
+ ret = of_property_read_u32_index(np, "reg", i, &tmp);
+ if (ret) {
+ dev_err(dev, "could not retrieve reg property: %d\n",
+ ret);
+ return ret;
+ }
+
+ if (tmp > NFC_MAX_CS) {
+ dev_err(dev,
+ "invalid reg value: %u (max CS = 7)\n",
+ tmp);
+ return -EINVAL;
+ }
+
+ if (test_and_set_bit(tmp, &nfc->assigned_cs)) {
+ dev_err(dev, "CS %d already assigned\n", tmp);
+ return -EINVAL;
+ }
+
+ chip->sels[i].cs = tmp;
+
+ if (!of_property_read_u32_index(np, "allwinner,rb", i, &tmp) &&
+ tmp < 2) {
+ chip->sels[i].rb.type = RB_NATIVE;
+ chip->sels[i].rb.info.nativeid = tmp;
+ } else {
+ ret = of_get_named_gpio(np, "rb-gpios", i);
+ if (ret >= 0) {
+ tmp = ret;
+ chip->sels[i].rb.type = RB_GPIO;
+ chip->sels[i].rb.info.gpio = tmp;
+ ret = devm_gpio_request(dev, tmp, "nand-rb");
+ if (ret)
+ return ret;
+
+ ret = gpio_direction_input(tmp);
+ if (ret)
+ return ret;
+ } else {
+ chip->sels[i].rb.type = RB_NONE;
+ }
+ }
+ }
+
+ timings = onfi_async_timing_mode_to_sdr_timings(0);
+ if (IS_ERR(timings)) {
+ ret = PTR_ERR(timings);
+ dev_err(dev,
+ "could not retrieve timings for ONFI mode 0: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = sunxi_nand_chip_set_timings(chip, timings);
+ if (ret) {
+ dev_err(dev, "could not configure chip timings: %d\n", ret);
+ return ret;
+ }
+
+ nand = &chip->nand;
+ /* Default tR value specified in the ONFI spec (chapter 4.15.1) */
+ nand->chip_delay = 200;
+ nand->controller = &nfc->controller;
+ nand->select_chip = sunxi_nfc_select_chip;
+ nand->cmd_ctrl = sunxi_nfc_cmd_ctrl;
+ nand->read_buf = sunxi_nfc_read_buf;
+ nand->write_buf = sunxi_nfc_write_buf;
+ nand->read_byte = sunxi_nfc_read_byte;
+
+ if (of_get_nand_on_flash_bbt(np))
+ nand->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
+
+ mtd = &chip->mtd;
+ mtd->dev.parent = dev;
+ mtd->priv = nand;
+ mtd->owner = THIS_MODULE;
+
+ ret = nand_scan_ident(mtd, nsels, NULL);
+ if (ret)
+ return ret;
+
+ ret = sunxi_nand_chip_init_timings(chip, np);
+ if (ret) {
+ dev_err(dev, "could not configure chip timings: %d\n", ret);
+ return ret;
+ }
+
+ ret = sunxi_nand_ecc_init(mtd, &nand->ecc, np);
+ if (ret) {
+ dev_err(dev, "ECC init failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = nand_scan_tail(mtd);
+ if (ret) {
+ dev_err(dev, "nand_scan_tail failed: %d\n", ret);
+ return ret;
+ }
+
+ ppdata.of_node = np;
+ ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
+ if (ret) {
+ dev_err(dev, "failed to register mtd device: %d\n", ret);
+ nand_release(mtd);
+ return ret;
+ }
+
+ list_add_tail(&chip->node, &nfc->chips);
+
+ return 0;
+}
+
+static int sunxi_nand_chips_init(struct device *dev, struct sunxi_nfc *nfc)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *nand_np;
+ int nchips = of_get_child_count(np);
+ int ret;
+
+ if (nchips > 8) {
+ dev_err(dev, "too many NAND chips: %d (max = 8)\n", nchips);
+ return -EINVAL;
+ }
+
+ for_each_child_of_node(np, nand_np) {
+ ret = sunxi_nand_chip_init(dev, nfc, nand_np);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void sunxi_nand_chips_cleanup(struct sunxi_nfc *nfc)
+{
+ struct sunxi_nand_chip *chip;
+
+ while (!list_empty(&nfc->chips)) {
+ chip = list_first_entry(&nfc->chips, struct sunxi_nand_chip,
+ node);
+ nand_release(&chip->mtd);
+ sunxi_nand_ecc_cleanup(&chip->nand.ecc);
+ }
+}
+
+static int sunxi_nfc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *r;
+ struct sunxi_nfc *nfc;
+ int irq;
+ int ret;
+
+ nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
+ if (!nfc)
+ return -ENOMEM;
+
+ nfc->dev = dev;
+ spin_lock_init(&nfc->controller.lock);
+ init_waitqueue_head(&nfc->controller.wq);
+ INIT_LIST_HEAD(&nfc->chips);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ nfc->regs = devm_ioremap_resource(dev, r);
+ if (IS_ERR(nfc->regs))
+ return PTR_ERR(nfc->regs);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "failed to retrieve irq\n");
+ return irq;
+ }
+
+ nfc->ahb_clk = devm_clk_get(dev, "ahb");
+ if (IS_ERR(nfc->ahb_clk)) {
+ dev_err(dev, "failed to retrieve ahb clk\n");
+ return PTR_ERR(nfc->ahb_clk);
+ }
+
+ ret = clk_prepare_enable(nfc->ahb_clk);
+ if (ret)
+ return ret;
+
+ nfc->mod_clk = devm_clk_get(dev, "mod");
+ if (IS_ERR(nfc->mod_clk)) {
+ dev_err(dev, "failed to retrieve mod clk\n");
+ ret = PTR_ERR(nfc->mod_clk);
+ goto out_ahb_clk_unprepare;
+ }
+
+ ret = clk_prepare_enable(nfc->mod_clk);
+ if (ret)
+ goto out_ahb_clk_unprepare;
+
+ ret = sunxi_nfc_rst(nfc);
+ if (ret)
+ goto out_mod_clk_unprepare;
+
+ writel(0, nfc->regs + NFC_REG_INT);
+ ret = devm_request_irq(dev, irq, sunxi_nfc_interrupt,
+ 0, "sunxi-nand", nfc);
+ if (ret)
+ goto out_mod_clk_unprepare;
+
+ platform_set_drvdata(pdev, nfc);
+
+ /*
+ * TODO: replace these magic values with proper flags as soon as we
+ * know what they are encoding.
+ */
+ writel(0x100, nfc->regs + NFC_REG_TIMING_CTL);
+ writel(0x7ff, nfc->regs + NFC_REG_TIMING_CFG);
+
+ ret = sunxi_nand_chips_init(dev, nfc);
+ if (ret) {
+ dev_err(dev, "failed to init nand chips\n");
+ goto out_mod_clk_unprepare;
+ }
+
+ return 0;
+
+out_mod_clk_unprepare:
+ clk_disable_unprepare(nfc->mod_clk);
+out_ahb_clk_unprepare:
+ clk_disable_unprepare(nfc->ahb_clk);
+
+ return ret;
+}
+
+static int sunxi_nfc_remove(struct platform_device *pdev)
+{
+ struct sunxi_nfc *nfc = platform_get_drvdata(pdev);
+
+ sunxi_nand_chips_cleanup(nfc);
+
+ return 0;
+}
+
+static const struct of_device_id sunxi_nfc_ids[] = {
+ { .compatible = "allwinner,sun4i-a10-nand" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sunxi_nfc_ids);
+
+static struct platform_driver sunxi_nfc_driver = {
+ .driver = {
+ .name = "sunxi_nand",
+ .of_match_table = sunxi_nfc_ids,
+ },
+ .probe = sunxi_nfc_probe,
+ .remove = sunxi_nfc_remove,
+};
+module_platform_driver(sunxi_nfc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Boris BREZILLON");
+MODULE_DESCRIPTION("Allwinner NAND Flash Controller driver");
+MODULE_ALIAS("platform:sunxi_nand");
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 2fb07eced2ba..39763b94f67d 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -719,16 +719,10 @@ static int fsl_qspi_read(struct spi_nor *nor, loff_t from,
{
struct fsl_qspi *q = nor->priv;
u8 cmd = nor->read_opcode;
- int ret;
dev_dbg(q->dev, "cmd [%x],read from (0x%p, 0x%.8x, 0x%.8x),len:%d\n",
cmd, q->ahb_base, q->chip_base_addr, (unsigned int)from, len);
- /* Wait until the previous command is finished. */
- ret = nor->wait_till_ready(nor);
- if (ret)
- return ret;
-
/* Read out the data directly from the AHB buffer.*/
memcpy(buf, q->ahb_base + q->chip_base_addr + from, len);
@@ -744,16 +738,6 @@ static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs)
dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n",
nor->mtd->erasesize / 1024, q->chip_base_addr, (u32)offs);
- /* Wait until finished previous write command. */
- ret = nor->wait_till_ready(nor);
- if (ret)
- return ret;
-
- /* Send write enable, then erase commands. */
- ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
- if (ret)
- return ret;
-
ret = fsl_qspi_runcmd(q, nor->erase_opcode, offs, 0);
if (ret)
return ret;
@@ -849,9 +833,8 @@ static int fsl_qspi_probe(struct platform_device *pdev)
ret = clk_prepare_enable(q->clk);
if (ret) {
- clk_disable_unprepare(q->clk_en);
dev_err(dev, "can not enable the qspi clock\n");
- goto map_failed;
+ goto clk_failed;
}
/* find the irq */
@@ -905,7 +888,8 @@ static int fsl_qspi_probe(struct platform_device *pdev)
nor->prepare = fsl_qspi_prep;
nor->unprepare = fsl_qspi_unprep;
- if (of_modalias_node(np, modalias, sizeof(modalias)) < 0)
+ ret = of_modalias_node(np, modalias, sizeof(modalias));
+ if (ret < 0)
goto map_failed;
ret = of_property_read_u32(np, "spi-max-frequency",
@@ -964,6 +948,7 @@ last_init_failed:
irq_failed:
clk_disable_unprepare(q->clk);
+clk_failed:
clk_disable_unprepare(q->clk_en);
map_failed:
dev_err(dev, "Freescale QuadSPI probe failed\n");
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index c51ee52386a7..0f8ec3c2d015 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -26,7 +26,38 @@
/* Define max times to check status register before we give up. */
#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */
-#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16)
+#define SPI_NOR_MAX_ID_LEN 6
+
+struct flash_info {
+ /*
+ * This array stores the ID bytes.
+ * The first three bytes are the JEDIC ID.
+ * JEDEC ID zero means "no ID" (mostly older chips).
+ */
+ u8 id[SPI_NOR_MAX_ID_LEN];
+ u8 id_len;
+
+ /* The size listed here is what works with SPINOR_OP_SE, which isn't
+ * necessarily called a "sector" by the vendor.
+ */
+ unsigned sector_size;
+ u16 n_sectors;
+
+ u16 page_size;
+ u16 addr_width;
+
+ u16 flags;
+#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */
+#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */
+#define SST_WRITE 0x04 /* use SST byte programming */
+#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */
+#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */
+#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */
+#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */
+#define USE_FSR 0x80 /* use flag status register */
+};
+
+#define JEDEC_MFR(info) ((info)->id[0])
static const struct spi_device_id *spi_nor_match_id(const char *name);
@@ -98,7 +129,7 @@ static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor)
case SPI_NOR_FAST:
case SPI_NOR_DUAL:
case SPI_NOR_QUAD:
- return 1;
+ return 8;
case SPI_NOR_NORMAL:
return 0;
}
@@ -138,13 +169,14 @@ static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
}
/* Enable/disable 4-byte addressing mode. */
-static inline int set_4byte(struct spi_nor *nor, u32 jedec_id, int enable)
+static inline int set_4byte(struct spi_nor *nor, struct flash_info *info,
+ int enable)
{
int status;
bool need_wren = false;
u8 cmd;
- switch (JEDEC_MFR(jedec_id)) {
+ switch (JEDEC_MFR(info)) {
case CFI_MFR_ST: /* Micron, actually */
/* Some Micron need WREN command; all will accept it */
need_wren = true;
@@ -165,81 +197,74 @@ static inline int set_4byte(struct spi_nor *nor, u32 jedec_id, int enable)
return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1, 0);
}
}
-
-static int spi_nor_wait_till_ready(struct spi_nor *nor)
+static inline int spi_nor_sr_ready(struct spi_nor *nor)
{
- unsigned long deadline;
- int sr;
-
- deadline = jiffies + MAX_READY_WAIT_JIFFIES;
-
- do {
- cond_resched();
+ int sr = read_sr(nor);
+ if (sr < 0)
+ return sr;
+ else
+ return !(sr & SR_WIP);
+}
- sr = read_sr(nor);
- if (sr < 0)
- break;
- else if (!(sr & SR_WIP))
- return 0;
- } while (!time_after_eq(jiffies, deadline));
+static inline int spi_nor_fsr_ready(struct spi_nor *nor)
+{
+ int fsr = read_fsr(nor);
+ if (fsr < 0)
+ return fsr;
+ else
+ return fsr & FSR_READY;
+}
- return -ETIMEDOUT;
+static int spi_nor_ready(struct spi_nor *nor)
+{
+ int sr, fsr;
+ sr = spi_nor_sr_ready(nor);
+ if (sr < 0)
+ return sr;
+ fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
+ if (fsr < 0)
+ return fsr;
+ return sr && fsr;
}
-static int spi_nor_wait_till_fsr_ready(struct spi_nor *nor)
+/*
+ * Service routine to read status register until ready, or timeout occurs.
+ * Returns non-zero if error.
+ */
+static int spi_nor_wait_till_ready(struct spi_nor *nor)
{
unsigned long deadline;
- int sr;
- int fsr;
+ int timeout = 0, ret;
deadline = jiffies + MAX_READY_WAIT_JIFFIES;
- do {
+ while (!timeout) {
+ if (time_after_eq(jiffies, deadline))
+ timeout = 1;
+
+ ret = spi_nor_ready(nor);
+ if (ret < 0)
+ return ret;
+ if (ret)
+ return 0;
+
cond_resched();
+ }
- sr = read_sr(nor);
- if (sr < 0) {
- break;
- } else if (!(sr & SR_WIP)) {
- fsr = read_fsr(nor);
- if (fsr < 0)
- break;
- if (fsr & FSR_READY)
- return 0;
- }
- } while (!time_after_eq(jiffies, deadline));
+ dev_err(nor->dev, "flash operation timed out\n");
return -ETIMEDOUT;
}
/*
- * Service routine to read status register until ready, or timeout occurs.
- * Returns non-zero if error.
- */
-static int wait_till_ready(struct spi_nor *nor)
-{
- return nor->wait_till_ready(nor);
-}
-
-/*
* Erase the whole flash memory
*
* Returns 0 if successful, non-zero otherwise.
*/
static int erase_chip(struct spi_nor *nor)
{
- int ret;
-
dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10));
- /* Wait until finished previous write command. */
- ret = wait_till_ready(nor);
- if (ret)
- return ret;
-
- /* Send write enable, then erase commands. */
- write_enable(nor);
-
return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0);
}
@@ -294,11 +319,17 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
/* whole-chip erase? */
if (len == mtd->size) {
+ write_enable(nor);
+
if (erase_chip(nor)) {
ret = -EIO;
goto erase_err;
}
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto erase_err;
+
/* REVISIT in some cases we could speed up erasing large regions
* by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K. We may have set up
* to use "small sector erase", but that's not always optimal.
@@ -307,6 +338,8 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
/* "sector"-at-a-time erase */
} else {
while (len) {
+ write_enable(nor);
+
if (nor->erase(nor, addr)) {
ret = -EIO;
goto erase_err;
@@ -314,9 +347,15 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
addr += mtd->erasesize;
len -= mtd->erasesize;
+
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto erase_err;
}
}
+ write_disable(nor);
+
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
instr->state = MTD_ERASE_DONE;
@@ -341,11 +380,6 @@ static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
if (ret)
return ret;
- /* Wait until finished previous command */
- ret = wait_till_ready(nor);
- if (ret)
- goto err;
-
status_old = read_sr(nor);
if (offset < mtd->size - (mtd->size / 2))
@@ -388,11 +422,6 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
if (ret)
return ret;
- /* Wait until finished previous command */
- ret = wait_till_ready(nor);
- if (ret)
- goto err;
-
status_old = read_sr(nor);
if (offset+len > mtd->size - (mtd->size / 64))
@@ -424,38 +453,34 @@ err:
return ret;
}
-struct flash_info {
- /* JEDEC id zero means "no ID" (most older chips); otherwise it has
- * a high byte of zero plus three data bytes: the manufacturer id,
- * then a two byte device id.
- */
- u32 jedec_id;
- u16 ext_id;
-
- /* The size listed here is what works with SPINOR_OP_SE, which isn't
- * necessarily called a "sector" by the vendor.
- */
- unsigned sector_size;
- u16 n_sectors;
-
- u16 page_size;
- u16 addr_width;
-
- u16 flags;
-#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */
-#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */
-#define SST_WRITE 0x04 /* use SST byte programming */
-#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */
-#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */
-#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */
-#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */
-#define USE_FSR 0x80 /* use flag status register */
-};
-
+/* Used when the "_ext_id" is two bytes at most */
#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
((kernel_ulong_t)&(struct flash_info) { \
- .jedec_id = (_jedec_id), \
- .ext_id = (_ext_id), \
+ .id = { \
+ ((_jedec_id) >> 16) & 0xff, \
+ ((_jedec_id) >> 8) & 0xff, \
+ (_jedec_id) & 0xff, \
+ ((_ext_id) >> 8) & 0xff, \
+ (_ext_id) & 0xff, \
+ }, \
+ .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \
+ .sector_size = (_sector_size), \
+ .n_sectors = (_n_sectors), \
+ .page_size = 256, \
+ .flags = (_flags), \
+ })
+
+#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
+ ((kernel_ulong_t)&(struct flash_info) { \
+ .id = { \
+ ((_jedec_id) >> 16) & 0xff, \
+ ((_jedec_id) >> 8) & 0xff, \
+ (_jedec_id) & 0xff, \
+ ((_ext_id) >> 16) & 0xff, \
+ ((_ext_id) >> 8) & 0xff, \
+ (_ext_id) & 0xff, \
+ }, \
+ .id_len = 6, \
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = 256, \
@@ -507,6 +532,9 @@ static const struct spi_device_id spi_nor_ids[] = {
{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
{ "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+ /* Fujitsu */
+ { "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) },
+
/* GigaDevice */
{ "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },
{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
@@ -532,6 +560,7 @@ static const struct spi_device_id spi_nor_ids[] = {
{ "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
/* Micron */
+ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) },
{ "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) },
{ "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) },
{ "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) },
@@ -556,6 +585,7 @@ static const struct spi_device_id spi_nor_ids[] = {
{ "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
{ "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
+ { "s25fl128s", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) },
{ "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, 0) },
{ "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) },
@@ -566,6 +596,7 @@ static const struct spi_device_id spi_nor_ids[] = {
{ "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
{ "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K) },
{ "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+ { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, 0) },
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
@@ -577,6 +608,7 @@ static const struct spi_device_id spi_nor_ids[] = {
{ "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) },
{ "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) },
{ "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
+ { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
/* ST Microelectronics -- newer production may have feature updates */
{ "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) },
@@ -588,7 +620,6 @@ static const struct spi_device_id spi_nor_ids[] = {
{ "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) },
{ "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) },
{ "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) },
- { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) },
{ "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) },
{ "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) },
@@ -643,32 +674,24 @@ static const struct spi_device_id spi_nor_ids[] = {
static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
{
int tmp;
- u8 id[5];
- u32 jedec;
- u16 ext_jedec;
+ u8 id[SPI_NOR_MAX_ID_LEN];
struct flash_info *info;
- tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, 5);
+ tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
if (tmp < 0) {
dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp);
return ERR_PTR(tmp);
}
- jedec = id[0];
- jedec = jedec << 8;
- jedec |= id[1];
- jedec = jedec << 8;
- jedec |= id[2];
-
- ext_jedec = id[3] << 8 | id[4];
for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
info = (void *)spi_nor_ids[tmp].driver_data;
- if (info->jedec_id == jedec) {
- if (info->ext_id == 0 || info->ext_id == ext_jedec)
+ if (info->id_len) {
+ if (!memcmp(info->id, id, info->id_len))
return &spi_nor_ids[tmp];
}
}
- dev_err(nor->dev, "unrecognized JEDEC id %06x\n", jedec);
+ dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %2x, %2x\n",
+ id[0], id[1], id[2]);
return ERR_PTR(-ENODEV);
}
@@ -703,11 +726,6 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
if (ret)
return ret;
- /* Wait until finished previous write command. */
- ret = wait_till_ready(nor);
- if (ret)
- goto time_out;
-
write_enable(nor);
nor->sst_write_second = false;
@@ -719,7 +737,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
/* write one byte. */
nor->write(nor, to, 1, retlen, buf);
- ret = wait_till_ready(nor);
+ ret = spi_nor_wait_till_ready(nor);
if (ret)
goto time_out;
}
@@ -731,7 +749,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
/* write two bytes. */
nor->write(nor, to, 2, retlen, buf + actual);
- ret = wait_till_ready(nor);
+ ret = spi_nor_wait_till_ready(nor);
if (ret)
goto time_out;
to += 2;
@@ -740,7 +758,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
nor->sst_write_second = false;
write_disable(nor);
- ret = wait_till_ready(nor);
+ ret = spi_nor_wait_till_ready(nor);
if (ret)
goto time_out;
@@ -751,7 +769,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
nor->program_opcode = SPINOR_OP_BP;
nor->write(nor, to, 1, retlen, buf + actual);
- ret = wait_till_ready(nor);
+ ret = spi_nor_wait_till_ready(nor);
if (ret)
goto time_out;
write_disable(nor);
@@ -779,11 +797,6 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
if (ret)
return ret;
- /* Wait until finished previous write command. */
- ret = wait_till_ready(nor);
- if (ret)
- goto write_err;
-
write_enable(nor);
page_offset = to & (nor->page_size - 1);
@@ -802,16 +815,20 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
if (page_size > nor->page_size)
page_size = nor->page_size;
- wait_till_ready(nor);
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto write_err;
+
write_enable(nor);
nor->write(nor, to + i, page_size, retlen, buf + i);
}
}
+ ret = spi_nor_wait_till_ready(nor);
write_err:
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
- return 0;
+ return ret;
}
static int macronix_quad_enable(struct spi_nor *nor)
@@ -824,7 +841,7 @@ static int macronix_quad_enable(struct spi_nor *nor)
nor->cmd_buf[0] = val | SR_QUAD_EN_MX;
nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0);
- if (wait_till_ready(nor))
+ if (spi_nor_wait_till_ready(nor))
return 1;
ret = read_sr(nor);
@@ -874,11 +891,11 @@ static int spansion_quad_enable(struct spi_nor *nor)
return 0;
}
-static int set_quad_mode(struct spi_nor *nor, u32 jedec_id)
+static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
{
int status;
- switch (JEDEC_MFR(jedec_id)) {
+ switch (JEDEC_MFR(info)) {
case CFI_MFR_MACRONIX:
status = macronix_quad_enable(nor);
if (status) {
@@ -904,11 +921,6 @@ static int spi_nor_check(struct spi_nor *nor)
return -EINVAL;
}
- if (!nor->read_id)
- nor->read_id = spi_nor_read_id;
- if (!nor->wait_till_ready)
- nor->wait_till_ready = spi_nor_wait_till_ready;
-
return 0;
}
@@ -926,16 +938,24 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
if (ret)
return ret;
- id = spi_nor_match_id(name);
- if (!id)
+ /* Try to auto-detect if chip name wasn't specified */
+ if (!name)
+ id = spi_nor_read_id(nor);
+ else
+ id = spi_nor_match_id(name);
+ if (IS_ERR_OR_NULL(id))
return -ENOENT;
info = (void *)id->driver_data;
- if (info->jedec_id) {
+ /*
+ * If caller has specified name of flash model that can normally be
+ * detected using JEDEC, let's verify it.
+ */
+ if (name && info->id_len) {
const struct spi_device_id *jid;
- jid = nor->read_id(nor);
+ jid = spi_nor_read_id(nor);
if (IS_ERR(jid)) {
return PTR_ERR(jid);
} else if (jid != id) {
@@ -960,9 +980,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
* up with the software protection bits set
*/
- if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL ||
- JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL ||
- JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) {
+ if (JEDEC_MFR(info) == CFI_MFR_ATMEL ||
+ JEDEC_MFR(info) == CFI_MFR_INTEL ||
+ JEDEC_MFR(info) == CFI_MFR_SST) {
write_enable(nor);
write_sr(nor, 0);
}
@@ -977,7 +997,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
mtd->_read = spi_nor_read;
/* nor protection support for STmicro chips */
- if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
+ if (JEDEC_MFR(info) == CFI_MFR_ST) {
mtd->_lock = spi_nor_lock;
mtd->_unlock = spi_nor_unlock;
}
@@ -988,9 +1008,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
else
mtd->_write = spi_nor_write;
- if ((info->flags & USE_FSR) &&
- nor->wait_till_ready == spi_nor_wait_till_ready)
- nor->wait_till_ready = spi_nor_wait_till_fsr_ready;
+ if (info->flags & USE_FSR)
+ nor->flags |= SNOR_F_USE_FSR;
#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
/* prefer "small sector" erase if possible */
@@ -1031,7 +1050,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
/* Quad/Dual-read mode takes precedence over fast/normal */
if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
- ret = set_quad_mode(nor, info->jedec_id);
+ ret = set_quad_mode(nor, info);
if (ret) {
dev_err(dev, "quad mode not supported\n");
return ret;
@@ -1067,7 +1086,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
else if (mtd->size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
- if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) {
+ if (JEDEC_MFR(info) == CFI_MFR_AMD) {
/* Dedicated 4-byte command set */
switch (nor->flash_read) {
case SPI_NOR_QUAD:
@@ -1088,7 +1107,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
nor->erase_opcode = SPINOR_OP_SE_4B;
mtd->erasesize = info->sector_size;
} else
- set_4byte(nor, info->jedec_id, 1);
+ set_4byte(nor, info, 1);
} else {
nor->addr_width = 3;
}
diff --git a/drivers/mtd/tests/oobtest.c b/drivers/mtd/tests/oobtest.c
index dc4f9602b97e..5e061186eab1 100644
--- a/drivers/mtd/tests/oobtest.c
+++ b/drivers/mtd/tests/oobtest.c
@@ -34,8 +34,11 @@
#include "mtd_test.h"
static int dev = -EINVAL;
+static int bitflip_limit;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
+module_param(bitflip_limit, int, S_IRUGO);
+MODULE_PARM_DESC(bitflip_limit, "Max. allowed bitflips per page");
static struct mtd_info *mtd;
static unsigned char *readbuf;
@@ -115,12 +118,36 @@ static int write_whole_device(void)
return 0;
}
+/*
+ * Display the address, offset and data bytes at comparison failure.
+ * Return number of bitflips encountered.
+ */
+static size_t memcmpshow(loff_t addr, const void *cs, const void *ct, size_t count)
+{
+ const unsigned char *su1, *su2;
+ int res;
+ size_t i = 0;
+ size_t bitflips = 0;
+
+ for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--, i++) {
+ res = *su1 ^ *su2;
+ if (res) {
+ pr_info("error @addr[0x%lx:0x%zx] 0x%x -> 0x%x diff 0x%x\n",
+ (unsigned long)addr, i, *su1, *su2, res);
+ bitflips += hweight8(res);
+ }
+ }
+
+ return bitflips;
+}
+
static int verify_eraseblock(int ebnum)
{
int i;
struct mtd_oob_ops ops;
int err = 0;
loff_t addr = (loff_t)ebnum * mtd->erasesize;
+ size_t bitflips;
prandom_bytes_state(&rnd_state, writebuf, use_len_max * pgcnt);
for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
@@ -139,8 +166,11 @@ static int verify_eraseblock(int ebnum)
errcnt += 1;
return err ? err : -1;
}
- if (memcmp(readbuf, writebuf + (use_len_max * i) + use_offset,
- use_len)) {
+
+ bitflips = memcmpshow(addr, readbuf,
+ writebuf + (use_len_max * i) + use_offset,
+ use_len);
+ if (bitflips > bitflip_limit) {
pr_err("error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;
@@ -148,7 +178,10 @@ static int verify_eraseblock(int ebnum)
pr_err("error: too many errors\n");
return -1;
}
+ } else if (bitflips) {
+ pr_info("ignoring error as within bitflip_limit\n");
}
+
if (use_offset != 0 || use_len < mtd->ecclayout->oobavail) {
int k;
@@ -167,9 +200,10 @@ static int verify_eraseblock(int ebnum)
errcnt += 1;
return err ? err : -1;
}
- if (memcmp(readbuf + use_offset,
- writebuf + (use_len_max * i) + use_offset,
- use_len)) {
+ bitflips = memcmpshow(addr, readbuf + use_offset,
+ writebuf + (use_len_max * i) + use_offset,
+ use_len);
+ if (bitflips > bitflip_limit) {
pr_err("error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;
@@ -177,7 +211,10 @@ static int verify_eraseblock(int ebnum)
pr_err("error: too many errors\n");
return -1;
}
+ } else if (bitflips) {
+ pr_info("ignoring error as within bitflip_limit\n");
}
+
for (k = 0; k < use_offset; ++k)
if (readbuf[k] != 0xff) {
pr_err("error: verify 0xff "
@@ -216,6 +253,9 @@ static int verify_eraseblock_in_one_go(int ebnum)
int err = 0;
loff_t addr = (loff_t)ebnum * mtd->erasesize;
size_t len = mtd->ecclayout->oobavail * pgcnt;
+ size_t oobavail = mtd->ecclayout->oobavail;
+ size_t bitflips;
+ int i;
prandom_bytes_state(&rnd_state, writebuf, len);
ops.mode = MTD_OPS_AUTO_OOB;
@@ -226,6 +266,8 @@ static int verify_eraseblock_in_one_go(int ebnum)
ops.ooboffs = 0;
ops.datbuf = NULL;
ops.oobbuf = readbuf;
+
+ /* read entire block's OOB at one go */
err = mtd_read_oob(mtd, addr, &ops);
if (err || ops.oobretlen != len) {
pr_err("error: readoob failed at %#llx\n",
@@ -233,13 +275,21 @@ static int verify_eraseblock_in_one_go(int ebnum)
errcnt += 1;
return err ? err : -1;
}
- if (memcmp(readbuf, writebuf, len)) {
- pr_err("error: verify failed at %#llx\n",
- (long long)addr);
- errcnt += 1;
- if (errcnt > 1000) {
- pr_err("error: too many errors\n");
- return -1;
+
+ /* verify one page OOB at a time for bitflip per page limit check */
+ for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
+ bitflips = memcmpshow(addr, readbuf + (i * oobavail),
+ writebuf + (i * oobavail), oobavail);
+ if (bitflips > bitflip_limit) {
+ pr_err("error: verify failed at %#llx\n",
+ (long long)addr);
+ errcnt += 1;
+ if (errcnt > 1000) {
+ pr_err("error: too many errors\n");
+ return -1;
+ }
+ } else if (bitflips) {
+ pr_info("ignoring error as within bitflip_limit\n");
}
}
@@ -610,7 +660,8 @@ static int __init mtd_oobtest_init(void)
err = mtd_read_oob(mtd, addr, &ops);
if (err)
goto out;
- if (memcmp(readbuf, writebuf, mtd->ecclayout->oobavail * 2)) {
+ if (memcmpshow(addr, readbuf, writebuf,
+ mtd->ecclayout->oobavail * 2)) {
pr_err("error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;
diff --git a/drivers/mtd/tests/torturetest.c b/drivers/mtd/tests/torturetest.c
index eeab96973cf0..b55bc52a1340 100644
--- a/drivers/mtd/tests/torturetest.c
+++ b/drivers/mtd/tests/torturetest.c
@@ -264,7 +264,9 @@ static int __init tort_init(void)
int i;
void *patt;
- mtdtest_erase_good_eraseblocks(mtd, bad_ebs, eb, ebcnt);
+ err = mtdtest_erase_good_eraseblocks(mtd, bad_ebs, eb, ebcnt);
+ if (err)
+ goto out;
/* Check if the eraseblocks contain only 0xFF bytes */
if (check) {
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index 386303dca382..dddbde4f56f4 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -224,7 +224,7 @@ static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c,
dbg_readinode("insert fragment %#04x-%#04x, ver %u at %08x\n", tn->fn->ofs, fn_end, tn->version, ref_offset(tn->fn->raw));
- /* If a node has zero dsize, we only have to keep if it if it might be the
+ /* If a node has zero dsize, we only have to keep it if it might be the
node with highest version -- i.e. the one which will end up as f->metadata.
Note that such nodes won't be REF_UNCHECKED since there are no data to
check anyway. */
diff --git a/fs/jffs2/summary.c b/fs/jffs2/summary.c
index c522d098bb4f..bc5385471a6e 100644
--- a/fs/jffs2/summary.c
+++ b/fs/jffs2/summary.c
@@ -844,6 +844,7 @@ static int jffs2_sum_write_data(struct jffs2_sb_info *c, struct jffs2_eraseblock
/* Write out summary information - called from jffs2_do_reserve_space */
int jffs2_sum_write_sumnode(struct jffs2_sb_info *c)
+ __must_hold(&c->erase_completion_block)
{
int datasize, infosize, padsize;
struct jffs2_eraseblock *jeb;
diff --git a/include/linux/fsl_ifc.h b/include/linux/fsl_ifc.h
index 84d60cb841b1..bf0321eabbda 100644
--- a/include/linux/fsl_ifc.h
+++ b/include/linux/fsl_ifc.h
@@ -29,7 +29,16 @@
#include <linux/of_platform.h>
#include <linux/interrupt.h>
-#define FSL_IFC_BANK_COUNT 4
+/*
+ * The actual number of banks implemented depends on the IFC version
+ * - IFC version 1.0 implements 4 banks.
+ * - IFC version 1.1 onward implements 8 banks.
+ */
+#define FSL_IFC_BANK_COUNT 8
+
+#define FSL_IFC_VERSION_MASK 0x0F0F0000
+#define FSL_IFC_VERSION_1_0_0 0x01000000
+#define FSL_IFC_VERSION_1_1_0 0x01010000
/*
* CSPR - Chip Select Property Register
@@ -776,23 +785,23 @@ struct fsl_ifc_regs {
__be32 cspr;
u32 res2;
} cspr_cs[FSL_IFC_BANK_COUNT];
- u32 res3[0x19];
+ u32 res3[0xd];
struct {
__be32 amask;
u32 res4[0x2];
} amask_cs[FSL_IFC_BANK_COUNT];
- u32 res5[0x18];
+ u32 res5[0xc];
struct {
__be32 csor;
__be32 csor_ext;
u32 res6;
} csor_cs[FSL_IFC_BANK_COUNT];
- u32 res7[0x18];
+ u32 res7[0xc];
struct {
__be32 ftim[4];
u32 res8[0x8];
} ftim_cs[FSL_IFC_BANK_COUNT];
- u32 res9[0x60];
+ u32 res9[0x30];
__be32 rb_stat;
u32 res10[0x2];
__be32 ifc_gcr;
@@ -827,6 +836,8 @@ struct fsl_ifc_ctrl {
int nand_irq;
spinlock_t lock;
void *nand;
+ int version;
+ int banks;
u32 nand_stat;
wait_queue_head_t nand_wait;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index e4d451e4600b..3d4ea7eb2b68 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -455,8 +455,21 @@ struct nand_hw_control {
* be provided if an hardware ECC is available
* @calculate: function for ECC calculation or readback from ECC hardware
* @correct: function for ECC correction, matching to ECC generator (sw/hw)
- * @read_page_raw: function to read a raw page without ECC
- * @write_page_raw: function to write a raw page without ECC
+ * @read_page_raw: function to read a raw page without ECC. This function
+ * should hide the specific layout used by the ECC
+ * controller and always return contiguous in-band and
+ * out-of-band data even if they're not stored
+ * contiguously on the NAND chip (e.g.
+ * NAND_ECC_HW_SYNDROME interleaves in-band and
+ * out-of-band data).
+ * @write_page_raw: function to write a raw page without ECC. This function
+ * should hide the specific layout used by the ECC
+ * controller and consider the passed data as contiguous
+ * in-band and out-of-band data. ECC controller is
+ * responsible for doing the appropriate transformations
+ * to adapt to its specific layout (e.g.
+ * NAND_ECC_HW_SYNDROME interleaves in-band and
+ * out-of-band data).
* @read_page: function to read a page according to the ECC generator
* requirements; returns maximum number of bitflips corrected in
* any single ECC step, 0 if bitflips uncorrectable, -EIO hw error
@@ -723,6 +736,7 @@ struct nand_chip {
#define NAND_MFR_EON 0x92
#define NAND_MFR_SANDISK 0x45
#define NAND_MFR_INTEL 0x89
+#define NAND_MFR_ATO 0x9b
/* The maximum expected count of bytes in the NAND ID sequence */
#define NAND_MAX_ID_LEN 8
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 046a0a2e4c4e..63aeccf9ddc8 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -116,6 +116,10 @@ enum spi_nor_ops {
SPI_NOR_OPS_UNLOCK,
};
+enum spi_nor_option_flags {
+ SNOR_F_USE_FSR = BIT(0),
+};
+
/**
* struct spi_nor - Structure for defining a the SPI NOR layer
* @mtd: point to a mtd_info structure
@@ -129,6 +133,7 @@ enum spi_nor_ops {
* @program_opcode: the program opcode
* @flash_read: the mode of the read
* @sst_write_second: used by the SST write operation
+ * @flags: flag options for the current SPI-NOR (SNOR_F_*)
* @cfg: used by the read_xfer/write_xfer
* @cmd_buf: used by the write_reg
* @prepare: [OPTIONAL] do some preparations for the
@@ -139,9 +144,6 @@ enum spi_nor_ops {
* @write_xfer: [OPTIONAL] the writefundamental primitive
* @read_reg: [DRIVER-SPECIFIC] read out the register
* @write_reg: [DRIVER-SPECIFIC] write data to the register
- * @read_id: [REPLACEABLE] read out the ID data, and find
- * the proper spi_device_id
- * @wait_till_ready: [REPLACEABLE] wait till the NOR becomes ready
* @read: [DRIVER-SPECIFIC] read data from the SPI NOR
* @write: [DRIVER-SPECIFIC] write data to the SPI NOR
* @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR
@@ -160,6 +162,7 @@ struct spi_nor {
u8 program_opcode;
enum read_mode flash_read;
bool sst_write_second;
+ u32 flags;
struct spi_nor_xfer_cfg cfg;
u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE];
@@ -172,8 +175,6 @@ struct spi_nor {
int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len);
int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
int write_enable);
- const struct spi_device_id *(*read_id)(struct spi_nor *nor);
- int (*wait_till_ready)(struct spi_nor *nor);
int (*read)(struct spi_nor *nor, loff_t from,
size_t len, size_t *retlen, u_char *read_buf);