summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/x86/Kconfig1
-rw-r--r--arch/x86/include/asm/device.h3
-rw-r--r--arch/x86/include/asm/dma-direct.h9
-rw-r--r--arch/x86/pci/sta2x11-fixup.c135
4 files changed, 26 insertions, 122 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d6e1faa28c58..35dd8f147f99 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -708,7 +708,6 @@ config X86_SUPPORTS_MEMORY_FAILURE
config STA2X11
bool "STA2X11 Companion Chip Support"
depends on X86_32_NON_STANDARD && PCI
- select ARCH_HAS_PHYS_TO_DMA
select SWIOTLB
select MFD_STA2X11
select GPIOLIB
diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h
index a8f6c809d9b1..5e12c63b47aa 100644
--- a/arch/x86/include/asm/device.h
+++ b/arch/x86/include/asm/device.h
@@ -6,9 +6,6 @@ struct dev_archdata {
#if defined(CONFIG_INTEL_IOMMU) || defined(CONFIG_AMD_IOMMU)
void *iommu; /* hook for IOMMU specific extension */
#endif
-#ifdef CONFIG_STA2X11
- bool is_sta2x11;
-#endif
};
#if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS)
diff --git a/arch/x86/include/asm/dma-direct.h b/arch/x86/include/asm/dma-direct.h
deleted file mode 100644
index 1a19251eaac9..000000000000
--- a/arch/x86/include/asm/dma-direct.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ASM_X86_DMA_DIRECT_H
-#define ASM_X86_DMA_DIRECT_H 1
-
-bool dma_capable(struct device *dev, dma_addr_t addr, size_t size);
-dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
-phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr);
-
-#endif /* ASM_X86_DMA_DIRECT_H */
diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c
index 6269a175385d..4a631264b809 100644
--- a/arch/x86/pci/sta2x11-fixup.c
+++ b/arch/x86/pci/sta2x11-fixup.c
@@ -30,7 +30,6 @@ struct sta2x11_ahb_regs { /* saved during suspend */
};
struct sta2x11_mapping {
- u32 amba_base;
int is_suspended;
struct sta2x11_ahb_regs regs[STA2X11_NR_FUNCS];
};
@@ -92,18 +91,6 @@ static int sta2x11_pdev_to_ep(struct pci_dev *pdev)
return pdev->bus->number - instance->bus0;
}
-static struct sta2x11_mapping *sta2x11_pdev_to_mapping(struct pci_dev *pdev)
-{
- struct sta2x11_instance *instance;
- int ep;
-
- instance = sta2x11_pdev_to_instance(pdev);
- if (!instance)
- return NULL;
- ep = sta2x11_pdev_to_ep(pdev);
- return instance->map + ep;
-}
-
/* This is exported, as some devices need to access the MFD registers */
struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev)
{
@@ -111,39 +98,6 @@ struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev)
}
EXPORT_SYMBOL(sta2x11_get_instance);
-
-/**
- * p2a - Translate physical address to STA2x11 AMBA address,
- * used for DMA transfers to STA2x11
- * @p: Physical address
- * @pdev: PCI device (must be hosted within the connext)
- */
-static dma_addr_t p2a(dma_addr_t p, struct pci_dev *pdev)
-{
- struct sta2x11_mapping *map;
- dma_addr_t a;
-
- map = sta2x11_pdev_to_mapping(pdev);
- a = p + map->amba_base;
- return a;
-}
-
-/**
- * a2p - Translate STA2x11 AMBA address to physical address
- * used for DMA transfers from STA2x11
- * @a: STA2x11 AMBA address
- * @pdev: PCI device (must be hosted within the connext)
- */
-static dma_addr_t a2p(dma_addr_t a, struct pci_dev *pdev)
-{
- struct sta2x11_mapping *map;
- dma_addr_t p;
-
- map = sta2x11_pdev_to_mapping(pdev);
- p = a - map->amba_base;
- return p;
-}
-
/* At setup time, we use our own ops if the device is a ConneXt one */
static void sta2x11_setup_pdev(struct pci_dev *pdev)
{
@@ -151,9 +105,6 @@ static void sta2x11_setup_pdev(struct pci_dev *pdev)
if (!instance) /* either a sta2x11 bridge or another ST device */
return;
- pci_set_consistent_dma_mask(pdev, STA2X11_AMBA_SIZE - 1);
- pci_set_dma_mask(pdev, STA2X11_AMBA_SIZE - 1);
- pdev->dev.archdata.is_sta2x11 = true;
/* We must enable all devices as master, for audio DMA to work */
pci_set_master(pdev);
@@ -161,61 +112,6 @@ static void sta2x11_setup_pdev(struct pci_dev *pdev)
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_setup_pdev);
/*
- * The following three functions are exported (used in swiotlb: FIXME)
- */
-/**
- * dma_capable - Check if device can manage DMA transfers (FIXME: kill it)
- * @dev: device for a PCI device
- * @addr: DMA address
- * @size: DMA size
- */
-bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
-{
- struct sta2x11_mapping *map;
-
- if (!dev->archdata.is_sta2x11) {
- if (!dev->dma_mask)
- return false;
- return addr + size - 1 <= *dev->dma_mask;
- }
-
- map = sta2x11_pdev_to_mapping(to_pci_dev(dev));
-
- if (!map || (addr < map->amba_base))
- return false;
- if (addr + size >= map->amba_base + STA2X11_AMBA_SIZE) {
- return false;
- }
-
- return true;
-}
-
-/**
- * __phys_to_dma - Return the DMA AMBA address used for this STA2x11 device
- * @dev: device for a PCI device
- * @paddr: Physical address
- */
-dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
- if (!dev->archdata.is_sta2x11)
- return paddr;
- return p2a(paddr, to_pci_dev(dev));
-}
-
-/**
- * dma_to_phys - Return the physical address used for this STA2x11 DMA address
- * @dev: device for a PCI device
- * @daddr: STA2x11 AMBA DMA address
- */
-phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
-{
- if (!dev->archdata.is_sta2x11)
- return daddr;
- return a2p(daddr, to_pci_dev(dev));
-}
-
-
-/*
* At boot we must set up the mappings for the pcie-to-amba bridge.
* It involves device access, and the same happens at suspend/resume time
*/
@@ -234,12 +130,22 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
/* At probe time, enable mapping for each endpoint, using the pdev */
static void sta2x11_map_ep(struct pci_dev *pdev)
{
- struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev);
+ struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev);
+ struct device *dev = &pdev->dev;
+ u32 amba_base, max_amba_addr;
int i;
- if (!map)
+ if (!instance)
return;
- pci_read_config_dword(pdev, AHB_BASE(0), &map->amba_base);
+
+ pci_read_config_dword(pdev, AHB_BASE(0), &amba_base);
+ max_amba_addr = amba_base + STA2X11_AMBA_SIZE - 1;
+
+ dev->dma_pfn_offset = PFN_DOWN(-amba_base);
+
+ dev->bus_dma_mask = max_amba_addr;
+ pci_set_consistent_dma_mask(pdev, max_amba_addr);
+ pci_set_dma_mask(pdev, max_amba_addr);
/* Configure AHB mapping */
pci_write_config_dword(pdev, AHB_PEXLBASE(0), 0);
@@ -253,13 +159,24 @@ static void sta2x11_map_ep(struct pci_dev *pdev)
dev_info(&pdev->dev,
"sta2x11: Map EP %i: AMBA address %#8x-%#8x\n",
- sta2x11_pdev_to_ep(pdev), map->amba_base,
- map->amba_base + STA2X11_AMBA_SIZE - 1);
+ sta2x11_pdev_to_ep(pdev), amba_base, max_amba_addr);
}
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_map_ep);
#ifdef CONFIG_PM /* Some register values must be saved and restored */
+static struct sta2x11_mapping *sta2x11_pdev_to_mapping(struct pci_dev *pdev)
+{
+ struct sta2x11_instance *instance;
+ int ep;
+
+ instance = sta2x11_pdev_to_instance(pdev);
+ if (!instance)
+ return NULL;
+ ep = sta2x11_pdev_to_ep(pdev);
+ return instance->map + ep;
+}
+
static void suspend_mapping(struct pci_dev *pdev)
{
struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev);